From 30f7ff91fcf5ac225d5c9b83479352e7e87fbfba Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 5 Oct 1999 19:11:57 +0000 Subject: Removed targets and configurations that are no longer functional and not likely to become so. Comments on each configuration are below. + Force CPU386 - This BSP was developed as part of the initial port of RTEMS to the i386. This board has been unavailable for a long time now. + GO32 - This BSP and some CPU code supported djgpp v1.x. This version is now quite old. No one has stepped forward to update the code to v2.x which may be technically impossible anyway. More importantly, go32 has been superceded by the pc386 BSP. --- README.configure | 28 ---------------------------- 1 file changed, 28 deletions(-) (limited to 'README.configure') diff --git a/README.configure b/README.configure index d71f419338..54e3830126 100644 --- a/README.configure +++ b/README.configure @@ -80,7 +80,6 @@ architecture. The following targets are supported: a29k-rtems only standalone, uses non-gnu compiler i386-rtems - i386-go32-rtems see notes i960-rtems hppa1.1-rtems m68k-rtems @@ -124,33 +123,6 @@ for the standalone build. 2.3 Target Dependent Notes -i386-go32-rtems: - - 1. This is based on djgpp v1.xx. It needs to be updated to v2.xx. - 2. This cannot be built one-tree style since RTEMS requires some - files which must be obtained from the binary distribution of the - djgpp library. DJGPP can be obtained from - http://www.delorie.com/djgpp/dl/ofc. - 3. You will need to manually install a number of files from the - binary distribution of the DJGPP library doing something - like the following: - - # unzip the djgpp distribution - cd include - cp dpmi.h INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/include - cp go32.h INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/include - cp dos.h INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/include - cp pc.h INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/include - - cd ../lib - cp crt* INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2 - cp libpc* INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2 - - # Make sure about destination on the next lines. It keeps the newlib - # libc.a and the binary djgpp libc.a from conflicting. - cp libc.a INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/libcgo32.a - cp libc_p.a INSTALL_POINT/lib/gcc-lib/i386-go32-rtems/2.7.2/libcgo32_p.a - bare: 1. See the README in the bare bsp source directory. This should -- cgit v1.2.3