From f48d7834b07e06c46d7a7fd735d88be167ab9a52 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Mon, 28 Sep 2020 09:08:57 +0200 Subject: doxygen: Fix use of getchark() and rtems_putc() --- cpukit/doxygen/appl-config.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/cpukit/doxygen/appl-config.h b/cpukit/doxygen/appl-config.h index d4895bb66a..eb9bf72abf 100644 --- a/cpukit/doxygen/appl-config.h +++ b/cpukit/doxygen/appl-config.h @@ -1326,9 +1326,9 @@ * file. This device is used to initialize the standard input, output, and * error file descriptors. * - * This device driver reads via rtems_putc(). + * This device driver reads via getchark(). * - * This device driver writes via getchark(). + * This device driver writes via rtems_putc(). * * The Termios framework is not used. There is no support to change device * settings, e.g. baud, stop bits, parity, etc. @@ -1362,15 +1362,15 @@ * file. This device is used to initialize the standard input, output, and * error file descriptors. * - * This device driver reads via rtems_putc(). + * This device driver reads via getchark(). * * This device driver writes into a write buffer. The count of characters * written into the write buffer is returned. It might be less than the * requested count, in case the write buffer is full. The write is * non-blocking and may be called from interrupt context. A dedicated task - * reads from the write buffer and outputs the characters via getchark(). This - * task runs with the least important priority. The write buffer size is 2047 - * characters and it is not configurable. + * reads from the write buffer and outputs the characters via rtems_putc(). + * This task runs with the least important priority. The write buffer size is + * 2047 characters and it is not configurable. * * Use ``fsync( STDOUT_FILENO )`` or ``fdatasync( STDOUT_FILENO )`` to drain * the write buffer. -- cgit v1.2.3