From ba7107616869bff7dc80627eab666fceb5ff4fb5 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Fri, 12 Oct 2001 13:19:08 +0000 Subject: 2001-10-11 Alexandra Kossovsky * clock/Makefile.am, clock/ckinit.c, clock/.cvsignore, Makefile.am, include/Makefile.am, include/iosh7750.h, include/ipl.h, include/ispsh7750.h, include/sh4_regs.h, include/sh4uart.h, include/sh7750_regs.h, include/.cvsignore, sci/Makefile.am, sci/console.c, sci/sh4uart.c, sci/.cvsignore, score/Makefile.am, score/cpu_asm.c, score/ispsh7750.c, score/.cvsignore, timer/Makefile.am, timer/timer.c, timer/.cvsignore, configure.ac, .cvsignore, ChangeLog: New files. Reviewed and updated to latest automake and autoconf standards by Ralf Corsepius . --- c/src/lib/libcpu/sh/sh7750/.cvsignore | 14 + c/src/lib/libcpu/sh/sh7750/ChangeLog | 13 + c/src/lib/libcpu/sh/sh7750/Makefile.am | 11 + c/src/lib/libcpu/sh/sh7750/clock/.cvsignore | 2 + c/src/lib/libcpu/sh/sh7750/clock/Makefile.am | 31 + c/src/lib/libcpu/sh/sh7750/clock/ckinit.c | 324 +++++ c/src/lib/libcpu/sh/sh7750/configure.ac | 37 + c/src/lib/libcpu/sh/sh7750/include/.cvsignore | 2 + c/src/lib/libcpu/sh/sh7750/include/Makefile.am | 38 + c/src/lib/libcpu/sh/sh7750/include/iosh7750.h | 50 + c/src/lib/libcpu/sh/sh7750/include/ipl.h | 76 + c/src/lib/libcpu/sh/sh7750/include/ispsh7750.h | 65 + c/src/lib/libcpu/sh/sh7750/include/sh4_regs.h | 53 + c/src/lib/libcpu/sh/sh7750/include/sh4uart.h | 178 +++ c/src/lib/libcpu/sh/sh7750/include/sh7750_regs.h | 1614 ++++++++++++++++++++++ c/src/lib/libcpu/sh/sh7750/sci/.cvsignore | 2 + c/src/lib/libcpu/sh/sh7750/sci/Makefile.am | 29 + c/src/lib/libcpu/sh/sh7750/sci/console.c | 484 +++++++ c/src/lib/libcpu/sh/sh7750/sci/sh4uart.c | 945 +++++++++++++ c/src/lib/libcpu/sh/sh7750/score/.cvsignore | 2 + c/src/lib/libcpu/sh/sh7750/score/Makefile.am | 31 + c/src/lib/libcpu/sh/sh7750/score/cpu_asm.c | 312 +++++ c/src/lib/libcpu/sh/sh7750/score/ispsh7750.c | 351 +++++ c/src/lib/libcpu/sh/sh7750/timer/.cvsignore | 2 + c/src/lib/libcpu/sh/sh7750/timer/Makefile.am | 31 + c/src/lib/libcpu/sh/sh7750/timer/timer.c | 292 ++++ 26 files changed, 4989 insertions(+) create mode 100644 c/src/lib/libcpu/sh/sh7750/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/ChangeLog create mode 100644 c/src/lib/libcpu/sh/sh7750/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/clock/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/clock/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/clock/ckinit.c create mode 100644 c/src/lib/libcpu/sh/sh7750/configure.ac create mode 100644 c/src/lib/libcpu/sh/sh7750/include/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/include/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/include/iosh7750.h create mode 100644 c/src/lib/libcpu/sh/sh7750/include/ipl.h create mode 100644 c/src/lib/libcpu/sh/sh7750/include/ispsh7750.h create mode 100644 c/src/lib/libcpu/sh/sh7750/include/sh4_regs.h create mode 100644 c/src/lib/libcpu/sh/sh7750/include/sh4uart.h create mode 100644 c/src/lib/libcpu/sh/sh7750/include/sh7750_regs.h create mode 100644 c/src/lib/libcpu/sh/sh7750/sci/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/sci/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/sci/console.c create mode 100644 c/src/lib/libcpu/sh/sh7750/sci/sh4uart.c create mode 100644 c/src/lib/libcpu/sh/sh7750/score/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/score/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/score/cpu_asm.c create mode 100644 c/src/lib/libcpu/sh/sh7750/score/ispsh7750.c create mode 100644 c/src/lib/libcpu/sh/sh7750/timer/.cvsignore create mode 100644 c/src/lib/libcpu/sh/sh7750/timer/Makefile.am create mode 100644 c/src/lib/libcpu/sh/sh7750/timer/timer.c diff --git a/c/src/lib/libcpu/sh/sh7750/.cvsignore b/c/src/lib/libcpu/sh/sh7750/.cvsignore new file mode 100644 index 0000000000..d29e5050f5 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/.cvsignore @@ -0,0 +1,14 @@ +Makefile +Makefile.in +aclocal.m4 +autom4te.cache +config.cache +config.guess +config.log +config.status +config.sub +configure +depcomp +install-sh +missing +mkinstalldirs diff --git a/c/src/lib/libcpu/sh/sh7750/ChangeLog b/c/src/lib/libcpu/sh/sh7750/ChangeLog new file mode 100644 index 0000000000..8e6b9cf371 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/ChangeLog @@ -0,0 +1,13 @@ +2001-10-11 Alexandra Kossovsky + + * clock/Makefile.am, clock/ckinit.c, clock/.cvsignore, Makefile.am, + include/Makefile.am, include/iosh7750.h, include/ipl.h, + include/ispsh7750.h, include/sh4_regs.h, include/sh4uart.h, + include/sh7750_regs.h, include/.cvsignore, sci/Makefile.am, + sci/console.c, sci/sh4uart.c, sci/.cvsignore, score/Makefile.am, + score/cpu_asm.c, score/ispsh7750.c, score/.cvsignore, + timer/Makefile.am, timer/timer.c, timer/.cvsignore, configure.ac, + .cvsignore, ChangeLog: New files. + Reviewed and updated to latest automake and autoconf standards + by Ralf Corsepius . + diff --git a/c/src/lib/libcpu/sh/sh7750/Makefile.am b/c/src/lib/libcpu/sh/sh7750/Makefile.am new file mode 100644 index 0000000000..e2790d1af5 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/Makefile.am @@ -0,0 +1,11 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I ../../../../../../aclocal + +SUBDIRS = include score clock sci timer + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/clock/.cvsignore b/c/src/lib/libcpu/sh/sh7750/clock/.cvsignore new file mode 100644 index 0000000000..282522db03 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/clock/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/c/src/lib/libcpu/sh/sh7750/clock/Makefile.am b/c/src/lib/libcpu/sh/sh7750/clock/Makefile.am new file mode 100644 index 0000000000..f0044ba331 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/clock/Makefile.am @@ -0,0 +1,31 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/clock.rel + +C_FILES = ckinit.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(top_srcdir)/../../../../../../make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/compile.am +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = ckinit.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/clock/ckinit.c b/c/src/lib/libcpu/sh/sh7750/clock/ckinit.c new file mode 100644 index 0000000000..6575670fa7 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/clock/ckinit.c @@ -0,0 +1,324 @@ +/* + * This file contains the generic RTEMS clock driver the Hitachi SH 7750 + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov + * + * COPYRIGHT (c) 2001 + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include + +#include + +#include +#include +#include +#include +#include + +#ifndef CLOCKPRIO +#define CLOCKPRIO 10 +#endif + +/* Clock timer prescaler division ratio */ +#define CLOCK_PRESCALER 4 +#define TCR0_TPSC SH7750_TCR_TPSC_DIV4 + +/* + * The interrupt vector number associated with the clock tick device + * driver. + */ + +#define CLOCK_VECTOR SH7750_EVT_TO_NUM(SH7750_EVT_TUNI0) + +/* + * Clock_driver_ticks is a monotonically increasing counter of the + * number of clock ticks since the driver was initialized. + */ + +volatile rtems_unsigned32 Clock_driver_ticks; + +static void Clock_exit( void ); +static rtems_isr Clock_isr( rtems_vector_number vector ); + +/* + * These are set by clock driver during its init + */ +rtems_device_major_number rtems_clock_major = ~0; +rtems_device_minor_number rtems_clock_minor; + +/* + * The previous ISR on this clock tick interrupt vector. + */ + +rtems_isr_entry Old_ticker; + +/* + * Isr Handler + */ + +/* Clock_isr -- + * Clock interrupt handling routine. + * + * PARAMETERS: + * vector - interrupt vector number + * + * RETURNS: + * none + */ +rtems_isr +Clock_isr(rtems_vector_number vector) +{ + unsigned16 tcr; + + /* reset the timer underflow flag */ + tcr = read16(SH7750_TCR0); + write16(tcr & ~SH7750_TCR_UNF, SH7750_TCR0); + + /* Increment the clock interrupt counter */ + Clock_driver_ticks++ ; + + /* Invoke rtems clock service routine */ + rtems_clock_tick(); +} + +/* Install_clock -- + * Install a clock tick handler and reprograms the chip. This + * is used to initially establish the clock tick. + * + * PARAMETERS: + * clock_isr - Clock interrupt stay routine + * + * RETURNS: + * none + * + * SIDE EFFECTS: + * Establish clock interrupt handler, configure Timer 0 hardware + */ +void +Install_clock(rtems_isr_entry clock_isr) +{ + int cpudiv = 1; /* CPU frequency divider */ + int tidiv = 1; /* Timer input frequency divider */ + unsigned32 timer_divider; /* Calculated Timer Divider value */ + unsigned8 temp8; + unsigned16 temp16; + + /* + * Initialize the clock tick device driver variables + */ + + Clock_driver_ticks = 0; + + /* Get CPU frequency divider from clock unit */ + switch (read16(SH7750_FRQCR) & SH7750_FRQCR_IFC) + { + case SH7750_FRQCR_IFCDIV1: + cpudiv = 1; + break; + + case SH7750_FRQCR_IFCDIV2: + cpudiv = 2; + break; + + case SH7750_FRQCR_IFCDIV3: + cpudiv = 3; + break; + + case SH7750_FRQCR_IFCDIV4: + cpudiv = 4; + break; + + case SH7750_FRQCR_IFCDIV6: + cpudiv = 6; + break; + + case SH7750_FRQCR_IFCDIV8: + cpudiv = 8; + break; + + default: + rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); + } + + /* Get peripheral module frequency divider from clock unit */ + switch (read16(SH7750_FRQCR) & SH7750_FRQCR_PFC) + { + case SH7750_FRQCR_PFCDIV2: + tidiv = 2 * CLOCK_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV3: + tidiv = 3 * CLOCK_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV4: + tidiv = 4 * CLOCK_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV6: + tidiv = 6 * CLOCK_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV8: + tidiv = 8 * CLOCK_PRESCALER; + break; + + default: + rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); + } + timer_divider = + (rtems_cpu_configuration_get_clicks_per_second() * + cpudiv / (tidiv*1000000)) * + rtems_configuration_get_microseconds_per_tick(); + + /* + * Hardware specific initialization + */ + + /* Stop the Timer 0 */ + temp8 = read8(SH7750_TSTR); + temp8 &= ~SH7750_TSTR_STR0; + write8(temp8, SH7750_TSTR); + + /* Establish interrupt handler */ + rtems_interrupt_catch( Clock_isr, CLOCK_VECTOR, &Old_ticker ); + + /* Reset counter */ + write32(timer_divider, SH7750_TCNT0); + + /* Load divider */ + write32(timer_divider, SH7750_TCOR0); + + write16( + SH7750_TCR_UNIE | /* Enable Underflow Interrupt */ + SH7750_TCR_CKEG_RAISE | /* Count on rising edge */ + TCR0_TPSC, /* Timer prescaler ratio */ + SH7750_TCR0); + + /* Set clock interrupt priority */ + temp16 = read16(SH7750_IPRA); + temp16 = (temp16 & ~SH7750_IPRA_TMU0) | (CLOCKPRIO << SH7750_IPRA_TMU0_S); + write16(temp16, SH7750_IPRA); + + /* Start the Timer 0 */ + temp8 = read8(SH7750_TSTR); + temp8 |= SH7750_TSTR_STR0; + write8(temp8, SH7750_TSTR); + + /* + * Schedule the clock cleanup routine to execute if the application exits. + */ + + atexit( Clock_exit ); +} + +/* Clock_exit -- + * Clean up before the application exits + * + * PARAMETERS: + * none + * + * RETURNS: + * none + * + * SIDE EFFECTS: + * Stop Timer 0 counting, set timer 0 interrupt priority level to 0. + */ +void +Clock_exit(void) +{ + unsigned8 temp8 = 0; + unsigned16 temp16 = 0; + + /* turn off the timer interrupts */ + /* Stop the Timer 0 */ + temp8 = read8(SH7750_TSTR); + temp8 &= ~SH7750_TSTR_STR0; + write8(temp8, SH7750_TSTR); + + /* Lower timer interrupt priority to 0 */ + temp16 = read16(SH7750_IPRA); + temp16 = (temp16 & ~SH7750_IPRA_TMU0) | (0 << SH7750_IPRA_TMU0_S); + write16(temp16, SH7750_IPRA); + + /* old vector shall not be installed */ +} + +/* Clock_initialize -- + * Device driver entry point for clock tick driver initialization. + * + * PARAMETERS: + * major - clock major device number + * minor - clock minor device number + * pargp - driver initialize primitive argument, not used + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_device_driver +Clock_initialize(rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp) +{ + Install_clock( Clock_isr ); + + /* + * make major/minor avail to others such as shared memory driver + */ + rtems_clock_major = major; + rtems_clock_minor = minor; + + return RTEMS_SUCCESSFUL; +} + +/* Clock_control -- + * Device driver entry point for clock driver IOCTL functions. + * + * PARAMETERS: + * major - clock major device number + * minor - clock minor device number + * pargp - driver ioctl primitive argument, not used + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_device_driver +Clock_control(rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp) +{ + rtems_unsigned32 isrlevel; + rtems_libio_ioctl_args_t *args = pargp; + + if (args != 0) + { + /* + * This is hokey, but until we get a defined interface + * to do this, it will just be this simple... + */ + + if (args->command == rtems_build_name('I', 'S', 'R', ' ')) + { + Clock_isr(CLOCK_VECTOR); + } + else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) + { + rtems_isr_entry ignored ; + rtems_interrupt_disable( isrlevel ); + rtems_interrupt_catch( args->buffer, CLOCK_VECTOR, &ignored ); + + rtems_interrupt_enable( isrlevel ); + } + } + return RTEMS_SUCCESSFUL; +} diff --git a/c/src/lib/libcpu/sh/sh7750/configure.ac b/c/src/lib/libcpu/sh/sh7750/configure.ac new file mode 100644 index 0000000000..bf31dc3299 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/configure.ac @@ -0,0 +1,37 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.52) +AC_INIT +AC_CONFIG_SRCDIR([include]) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-lib-libcpu-sh-sh7750,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_BARE +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) + +# Explicitly list all Makefiles here +AC_CONFIG_FILES([Makefile +clock/Makefile +include/Makefile +score/Makefile +sci/Makefile +timer/Makefile]) +AC_OUTPUT diff --git a/c/src/lib/libcpu/sh/sh7750/include/.cvsignore b/c/src/lib/libcpu/sh/sh7750/include/.cvsignore new file mode 100644 index 0000000000..282522db03 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/c/src/lib/libcpu/sh/sh7750/include/Makefile.am b/c/src/lib/libcpu/sh/sh7750/include/Makefile.am new file mode 100644 index 0000000000..02015de005 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/Makefile.am @@ -0,0 +1,38 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +# NOTE: Unlike other CPUS, we install into a subdirectory to avoid +# file name conflicts +include_shdir = $(includedir)/sh +include_rtems_scoredir = $(includedir)/rtems/score + +include_sh_HEADERS = sh4uart.h +include_rtems_score_HEADERS = ispsh7750.h iosh7750.h + +$(PROJECT_INCLUDE)/sh: + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/sh/%.h: %.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/rtems/score/%.h: %.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES = $(PROJECT_INCLUDE)/sh \ + $(include_sh_HEADERS:%=$(PROJECT_INCLUDE)/sh/%) \ + $(include_rtems_score_HEADERS:%=$(PROJECT_INCLUDE)/rtems/score/%) + +all-local: $(TMPINSTALL_FILES) + +# FIXME: What are these files here? +# They should either be installed or removed +EXTRA_DIST = \ +ipl.h \ +sh4_regs.h \ +sh4uart.h \ +sh7750_regs.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/include/iosh7750.h b/c/src/lib/libcpu/sh/sh7750/include/iosh7750.h new file mode 100644 index 0000000000..7bad6b98f8 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/iosh7750.h @@ -0,0 +1,50 @@ +/* + * This include file contains information pertaining to the Hitachi SH + * processor. + * + * NOTE: NOT ALL VALUES HAVE BEEN CHECKED !! + * + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * Based on "iosh7030.h" distributed with Hitachi's EVB's tutorials, which + * contained no copyright notice. + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to reflect on-chip registers for sh7045 processor, based on + * "Register.h" distributed with Hitachi's EVB7045F tutorials, and which + * contained no copyright notice: + * John M. Mills (jmills@tga.com) + * TGA Technologies, Inc. + * 100 Pinnacle Way, Suite 140 + * Norcross, GA 30071 U.S.A. + * August, 1999 + * + * This modified file may be copied and distributed in accordance + * the above-referenced license. It is provided for critique and + * developmental purposes without any warranty nor representation + * by the authors or by TGA Technologies. + * + * $Id$ + */ + +#ifndef __IOSH7750_H +#define __IOSH7750_H + +#include "sh7750_regs.h" + +#endif diff --git a/c/src/lib/libcpu/sh/sh7750/include/ipl.h b/c/src/lib/libcpu/sh/sh7750/include/ipl.h new file mode 100644 index 0000000000..bdbcae811d --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/ipl.h @@ -0,0 +1,76 @@ +/* ipl.h + * + * IPL console driver + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov + * + * Based on work: + * Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#ifndef __IPL_DRIVER_h +#define __IPL_DRIVER_h + +#ifdef __cplusplus +extern "C" { +#endif + +#define IPL_DRIVER_TABLE_ENTRY \ + { ipl_console_initialize, ipl_console_open, ipl_console_close, \ + ipl_console_read, ipl_console_write, ipl_console_control } + + +#define NULL_SUCCESSFUL RTEMS_SUCCESSFUL + +rtems_device_driver ipl_console_initialize( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +rtems_device_driver ipl_console_open( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +rtems_device_driver ipl_console_close( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +rtems_device_driver ipl_console_read( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +rtems_device_driver ipl_console_write( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +rtems_device_driver ipl_console_control( + rtems_device_major_number, + rtems_device_minor_number, + void * +); + +#ifdef __cplusplus +} +#endif + +#endif +/* end of include file */ diff --git a/c/src/lib/libcpu/sh/sh7750/include/ispsh7750.h b/c/src/lib/libcpu/sh/sh7750/include/ispsh7750.h new file mode 100644 index 0000000000..6b6c5a34ae --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/ispsh7750.h @@ -0,0 +1,65 @@ +/* + * This include file contains information pertaining to the Hitachi + * SH7750 processor. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov + * + * Based on work of: + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to reflect isp entries for sh7045 processor: + * John M. Mills (jmills@tga.com) + * TGA Technologies, Inc. + * 100 Pinnacle Way, Suite 140 + * Norcross, GA 30071 U.S.A. + * + * + * This modified file may be copied and distributed in accordance + * the above-referenced license. It is provided for critique and + * developmental purposes without any warranty nor representation + * by the authors or by TGA Technologies. + * + * $Id$ + */ + +#ifndef __CPU_ISPS_H +#define __CPU_ISPS_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +/* dummy ISP */ +extern void _dummy_isp( void ); + +extern void __ISR_Handler( unsigned32 vector ); + +/* This variable contains VBR value used to pass control when debug, error + * or virtual memory exceptions occured. + */ +extern void *_VBR_Saved; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/c/src/lib/libcpu/sh/sh7750/include/sh4_regs.h b/c/src/lib/libcpu/sh/sh7750/include/sh4_regs.h new file mode 100644 index 0000000000..71c61236ee --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/sh4_regs.h @@ -0,0 +1,53 @@ +/* + * Bits on SH-4 registers. + * See SH-4 Programming manual for more details. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Alexandra Kossovsky + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * @(#) $Id$ + */ + +#ifndef __SH4_REGS_H__ +#define __SH4_REGS_H__ + +/* SR -- Status Register */ +#define SH4_SR_MD 0x40000000 /* Priveleged mode */ +#define SH4_SR_RB 0x20000000 /* General register bank specifier */ +#define SH4_SR_BL 0x10000000 /* Exeption/interrupt masking bit */ +#define SH4_SR_FD 0x00008000 /* FPU disable bit */ +#define SH4_SR_M 0x00000200 /* For signed division: + divisor (module) is negative */ +#define SH4_SR_Q 0x00000100 /* For signed division: + dividend (and quotient) is negative */ +#define SH4_SR_IMASK 0x000000f0 /* Interrupt mask level */ +#define SH4_SR_IMASK_S 4 +#define SH4_SR_S 0x00000002 /* Saturation for MAC instruction: + if set, data in MACH/L register + is restricted to 48/32 bits + for MAC.W/L instructions */ +#define SH4_SR_T 0x00000001 /* 1 if last condiyion was true */ +#define SH4_SR_RESERV 0x8fff7d0d /* Reserved bits, read/write as 0 */ + +/* FPSCR -- FPU Starus/Control Register */ +#define SH4_FPSCR_FR 0x00200000 /* FPU register bank specifier */ +#define SH4_FPSCR_SZ 0x00100000 /* FMOV 64-bit transfer mode */ +#define SH4_FPSCR_PR 0x00080000 /* Double-percision floating-point + operations flag */ + /* SH4_FPSCR_SZ & SH4_FPSCR_PR != 1 */ +#define SH4_FPSCR_DN 0x00040000 /* Treat denormalized number as zero */ +#define SH4_FPSCR_CAUSE 0x0003f000 /* FPU exeption cause field */ +#define SH4_FPSCR_CAUSE_S 12 +#define SH4_FPSCR_ENABLE 0x00000f80 /* FPU exeption enable field */ +#define SH4_FPSCR_ENABLE_s 7 +#define SH4_FPSCR_FLAG 0x0000007d /* FPU exeption flag field */ +#define SH4_FPSCR_FLAG_S 2 +#define SH4_FPSCR_RM 0x00000001 /* Rounding mode: + 1/0 -- round to zero/nearest */ +#define SH4_FPSCR_RESERV 0xffd00000 /* Reserved bits, read/write as 0 */ + +#endif diff --git a/c/src/lib/libcpu/sh/sh7750/include/sh4uart.h b/c/src/lib/libcpu/sh/sh7750/include/sh4uart.h new file mode 100644 index 0000000000..7aa59fbb48 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/sh4uart.h @@ -0,0 +1,178 @@ +/* + * Generic UART Serial driver for SH-4 processors definitions + * + * Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russian Fed. + * Author: Alexandra Kossovsky + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * + * http://www.OARcorp.com/rtems/license.html. + * + * @(#) $Id$ + * + */ + +#ifndef __SH4UART_H__ +#define __SH4UART_H__ + +#include "bsp.h" +#include "rtems/score/sh7750_regs.h" + + +/* + * Define this to work from gdb stub + */ +#define SH4_WITH_IPL + +#define SH4_SCI 1 /* Serial Communication Interface - SCI */ +#define SH4_SCIF 2 /* Serial Communication Interface with FIFO - SCIF */ +#define TRANSMIT_TRIGGER_VALUE(ttrg) ((ttrg) == SH7750_SCFCR2_RTRG_1 ? 1 : \ + (ttrg) == SH7750_SCFCR2_RTRG_4 ? 4 : \ + (ttrg) == SH7750_SCFCR2_RTRG_8 ? 8 : 14) + +/* + * Macros to call UART registers + */ +#define SCRDR(n) (*(volatile rtems_unsigned8 *)SH7750_SCRDR(n)) +#define SCRDR1 SCRDR(1) +#define SCRDR2 SCRDR(2) +#define SCTDR(n) (*(volatile rtems_unsigned8 *)SH7750_SCTDR(n)) +#define SCTDR1 SCTDR(1) +#define SCTDR2 SCTDR(2) +#define SCSMR(n) ((n) == 1 ? *(volatile rtems_unsigned8 *)SH7750_SCSMR1 : \ + *(volatile rtems_unsigned16 *)SH7750_SCSMR2) +#define SCSMR1 SCSMR(1) +#define SCSMR2 SCSMR(2) +#define SCSCR(n) ((n) == 1 ? *(volatile rtems_unsigned8 *)SH7750_SCSCR1 : \ + *(volatile rtems_unsigned16 *)SH7750_SCSCR2) +#define SCSCR1 SCSCR(1) +#define SCSCR2 SCSCR(2) +#define SCSSR(n) ((n) == 1 ? *(volatile rtems_unsigned8 *)SH7750_SCSSR1 : \ + *(volatile rtems_unsigned16 *)SH7750_SCSSR2) +#define SCSSR1 SCSSR(1) +#define SCSSR2 SCSSR(2) +#define SCSPTR1 (*(volatile rtems_unsigned8 *)SH7750_SCSPTR1) +#define SCSPTR2 (*(volatile rtems_unsigned16 *)SH7750_SCSPTR2) +#define SCBRR(n) (*(volatile rtems_unsigned8 *)SH7750_SCBRR(n)) +#define SCBRR1 SCBRR(1) +#define SCBRR2 SCBRR(2) +#define SCFCR2 (*(volatile rtems_unsigned16 *)SH7750_SCFCR2) +#define SCFDR2 (*(volatile rtems_unsigned16 *)SH7750_SCFDR2) +#define SCLSR2 (*(volatile rtems_unsigned16 *)SH7750_SCLSR2) + +#define IPRB (*(volatile rtems_unsigned16 *)SH7750_IPRB) +#define IPRC (*(volatile rtems_unsigned16 *)SH7750_IPRC) + +/* + * The following structure is a descriptor of single UART channel. + * It contains the initialization information about channel and + * current operating values + */ +typedef struct sh4uart { + rtems_unsigned8 chn; /* UART channel number */ + rtems_unsigned8 int_driven; /* UART interrupt vector number, or + 0 if polled I/O */ + void *tty; /* termios channel descriptor */ + + volatile const char *tx_buf; /* Transmit buffer from termios */ + volatile rtems_unsigned32 tx_buf_len; /* Transmit buffer length */ + volatile rtems_unsigned32 tx_ptr; /* Index of next char to transmit*/ + + rtems_isr_entry old_handler_transmit; /* Saved interrupt handlers */ + rtems_isr_entry old_handler_receive; + + tcflag_t c_iflag; /* termios input mode flags */ + rtems_boolean parerr_mark_flag; /* Parity error processing state */ +} sh4uart; + +/* + * Functions from sh4uart.c + */ + +/* sh4uart_init -- + * This function verifies the input parameters and perform initialization + * of the Motorola Coldfire on-chip UART descriptor structure. + * + */ +rtems_status_code +sh4uart_init(sh4uart *uart, void *tty, int chn, int int_driven); + +/* sh4uart_reset -- + * This function perform the hardware initialization of Motorola + * Coldfire processor on-chip UART controller using parameters + * filled by the sh4uart_init function. + */ +rtems_status_code +sh4uart_reset(sh4uart *uart); + +/* sh4uart_disable -- + * This function disable the operations on Motorola Coldfire UART + * controller + */ +rtems_status_code +sh4uart_disable(sh4uart *uart); + +/* sh4uart_set_attributes -- + * This function parse the termios attributes structure and perform + * the appropriate settings in hardware. + */ +rtems_status_code +sh4uart_set_attributes(sh4uart *mcf, const struct termios *t); + +/* sh4uart_poll_read -- + * This function tried to read character from MCF UART and perform + * error handling. + */ +int +sh4uart_poll_read(sh4uart *uart); + +#ifdef SH4_WITH_IPL +/* ipl_console_poll_read -- + * This function tried to read character from MCF UART over SH-IPL. + */ +int +ipl_console_poll_read(int minor); + +/* sh4uart_interrupt_write -- + * This function initiate transmitting of the buffer in interrupt mode. + */ +rtems_status_code +sh4uart_interrupt_write(sh4uart *uart, const char *buf, int len); + +/* sh4uart_poll_write -- + * This function transmit buffer byte-by-byte in polling mode. + */ +int +sh4uart_poll_write(sh4uart *uart, const char *buf, int len); + +/* ipl_console_poll_write -- + * This function transmit buffer byte-by-byte in polling mode over SH-IPL. + */ +int +ipl_console_poll_write(int minor, const char *buf, int len); + +/* + * ipl_finish -- + * Says gdb that program finished to get out from it. + */ +extern void ipl_finish(void); +#endif + +/* sh4uart_stop_remote_tx -- + * This function stop data flow from remote device. + */ +rtems_status_code +sh4uart_stop_remote_tx(sh4uart *uart); + +/* sh4uart_start_remote_tx -- + * This function resume data flow from remote device. + */ +rtems_status_code +sh4uart_start_remote_tx(sh4uart *uart); + +/* Descriptor structures for two on-chip UART channels */ +extern sh4uart sh4_uarts[2]; + +#endif + diff --git a/c/src/lib/libcpu/sh/sh7750/include/sh7750_regs.h b/c/src/lib/libcpu/sh/sh7750/include/sh7750_regs.h new file mode 100644 index 0000000000..46c4ba8cde --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/include/sh7750_regs.h @@ -0,0 +1,1614 @@ +/* + * SH-7750 memory-mapped registers + * This file based on information provided in the following document: + * "Hitachi SuperH (tm) RISC engine. SH7750 Series (SH7750, SH7750S) + * Hardware Manual" + * Document Number ADE-602-124C, Rev. 4.0, 4/21/00, Hitachi Ltd. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Alexandra Kossovsky + * Victor V. Vengerov + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * @(#) $Id$ + */ + +#ifndef __SH7750_REGS_H__ +#define __SH7750_REGS_H__ + +/* + * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and + * in 0x1f000000 - 0x1fffffff (area 7 address) + */ +#define SH7750_P4_BASE 0xff000000 /* Accessable only in + priveleged mode */ +#define SH7750_A7_BASE 0x1f000000 /* Accessable only using TLB */ + +#define SH7750_P4_REG32(ofs) (SH7750_P4_BASE + (ofs)) +#define SH7750_A7_REG32(ofs) (SH7750_A7_BASE + (ofs)) + +/* + * MMU Registers + */ + +/* Page Table Entry High register - PTEH */ +#define SH7750_PTEH_REGOFS 0x000000 /* offset */ +#define SH7750_PTEH SH7750_P4_REG32(SH7750_PTEH_REGOFS) +#define SH7750_PTEH_A7 SH7750_A7_REG32(SH7750_PTEH_REGOFS) +#define SH7750_PTEH_VPN 0xfffffd00 /* Virtual page number */ +#define SH7750_PTEH_VPN_S 10 +#define SH7750_PTEH_ASID 0x000000ff /* Address space identifier */ +#define SH7750_PTEH_ASID_S 0 + +/* Page Table Entry Low register - PTEL */ +#define SH7750_PTEL_REGOFS 0x000004 /* offset */ +#define SH7750_PTEL SH7750_P4_REG32(SH7750_PTEL_REGOFS) +#define SH7750_PTEL_A7 SH7750_A7_REG32(SH7750_PTEL_REGOFS) +#define SH7750_PTEL_PPN 0x1ffffc00 /* Physical page number */ +#define SH7750_PTEL_PPN_S 10 +#define SH7750_PTEL_V 0x00000100 /* Validity (0-entry is invalid) */ +#define SH7750_PTEL_SZ1 0x00000080 /* Page size bit 1 */ +#define SH7750_PTEL_SZ0 0x00000010 /* Page size bit 0 */ +#define SH7750_PTEL_SZ_1KB 0x00000000 /* 1-kbyte page */ +#define SH7750_PTEL_SZ_4KB 0x00000010 /* 4-kbyte page */ +#define SH7750_PTEL_SZ_64KB 0x00000080 /* 64-kbyte page */ +#define SH7750_PTEL_SZ_1MB 0x00000090 /* 1-Mbyte page */ +#define SH7750_PTEL_PR 0x00000060 /* Protection Key Data */ +#define SH7750_PTEL_PR_ROPO 0x00000000 /* read-only in priv mode */ +#define SH7750_PTEL_PR_RWPO 0x00000020 /* read-write in priv mode */ +#define SH7750_PTEL_PR_ROPU 0x00000040 /* read-only in priv or user mode*/ +#define SH7750_PTEL_PR_RWPU 0x00000060 /* read-write in priv or user mode*/ +#define SH7750_PTEL_C 0x00000008 /* Cacheability + (0 - page not cacheable) */ +#define SH7750_PTEL_D 0x00000004 /* Dirty bit (1 - write has been + performed to a page) */ +#define SH7750_PTEL_SH 0x00000002 /* Share Status bit (1 - page are + shared by processes) */ +#define SH7750_PTEL_WT 0x00000001 /* Write-through bit, specifies the + cache write mode: + 0 - Copy-back mode + 1 - Write-through mode */ + +/* Page Table Entry Assistance register - PTEA */ +#define SH7750_PTEA_REGOFS 0x000034 /* offset */ +#define SH7750_PTEA SH7750_P4_REG32(SH7750_PTEA_REGOFS) +#define SH7750_PTEA_A7 SH7750_A7_REG32(SH7750_PTEA_REGOFS) +#define SH7750_PTEA_TC 0x00000008 /* Timing Control bit + 0 - use area 5 wait states + 1 - use area 6 wait states */ +#define SH7750_PTEA_SA 0x00000007 /* Space Attribute bits: */ +#define SH7750_PTEA_SA_UNDEF 0x00000000 /* 0 - undefined */ +#define SH7750_PTEA_SA_IOVAR 0x00000001 /* 1 - variable-size I/O space */ +#define SH7750_PTEA_SA_IO8 0x00000002 /* 2 - 8-bit I/O space */ +#define SH7750_PTEA_SA_IO16 0x00000003 /* 3 - 16-bit I/O space */ +#define SH7750_PTEA_SA_CMEM8 0x00000004 /* 4 - 8-bit common memory space*/ +#define SH7750_PTEA_SA_CMEM16 0x00000005 /* 5 - 16-bit common memory space*/ +#define SH7750_PTEA_SA_AMEM8 0x00000006 /* 6 - 8-bit attr memory space */ +#define SH7750_PTEA_SA_AMEM16 0x00000007 /* 7 - 16-bit attr memory space */ + + +/* Translation table base register */ +#define SH7750_TTB_REGOFS 0x000008 /* offset */ +#define SH7750_TTB SH7750_P4_REG32(SH7750_TTB_REGOFS) +#define SH7750_TTB_A7 SH7750_A7_REG32(SH7750_TTB_REGOFS) + +/* TLB exeption address register - TEA */ +#define SH7750_TEA_REGOFS 0x00000c /* offset */ +#define SH7750_TEA SH7750_P4_REG32(SH7750_TEA_REGOFS) +#define SH7750_TEA_A7 SH7750_A7_REG32(SH7750_TEA_REGOFS) + +/* MMU control register - MMUCR */ +#define SH7750_MMUCR_REGOFS 0x000010 /* offset */ +#define SH7750_MMUCR SH7750_P4_REG32(SH7750_MMUCR_REGOFS) +#define SH7750_MMUCR_A7 SH7750_A7_REG32(SH7750_MMUCR_REGOFS) +#define SH7750_MMUCR_AT 0x00000001 /* Address translation bit */ +#define SH7750_MMUCR_TI 0x00000004 /* TLB invalidate */ +#define SH7750_MMUCR_SV 0x00000100 /* Single Virtual Mode bit */ +#define SH7750_MMUCR_SQMD 0x00000200 /* Store Queue Mode bit */ +#define SH7750_MMUCR_URC 0x0000FC00 /* UTLB Replace Counter */ +#define SH7750_MMUCR_URC_S 10 +#define SH7750_MMUCR_URB 0x00FC0000 /* UTLB Replace Boundary */ +#define SH7750_MMUCR_URB_S 18 +#define SH7750_MMUCR_LRUI 0xFC000000 /* Least Recently Used ITLB */ +#define SH7750_MMUCR_LRUI_S 26 + + + + +/* + * Cache registers + * IC -- instructions cache + * OC -- operand cache + */ + +/* Cache Control Register - CCR */ +#define SH7750_CCR_REGOFS 0x00001c /* offset */ +#define SH7750_CCR SH7750_P4_REG32(SH7750_CCR_REGOFS) +#define SH7750_CCR_A7 SH7750_A7_REG32(SH7750_CCR_REGOFS) + +#define SH7750_CCR_IIX 0x00008000 /* IC index enable bit */ +#define SH7750_CCR_ICI 0x00000800 /* IC invalidation bit: + set it to clear IC */ +#define SH7750_CCR_ICE 0x00000100 /* IC enable bit */ +#define SH7750_CCR_OIX 0x00000080 /* OC index enable bit */ +#define SH7750_CCR_ORA 0x00000020 /* OC RAM enable bit + if you set OCE = 0, + you should set ORA = 0 */ +#define SH7750_CCR_OCI 0x00000008 /* OC invalidation bit */ +#define SH7750_CCR_CB 0x00000004 /* Copy-back bit for P1 area */ +#define SH7750_CCR_WT 0x00000002 /* Write-through bit for P0,U0,P3 area */ +#define SH7750_CCR_OCE 0x00000001 /* OC enable bit */ + +/* Queue address control register 0 - QACR0 */ +#define SH7750_QACR0_REGOFS 0x000038 /* offset */ +#define SH7750_QACR0 SH7750_P4_REG32(SH7750_QACR0_REGOFS) +#define SH7750_QACR0_A7 SH7750_A7_REG32(SH7750_QACR0_REGOFS) + +/* Queue address control register 1 - QACR1 */ +#define SH7750_QACR1_REGOFS 0x00003c /* offset */ +#define SH7750_QACR1 SH7750_P4_REG32(SH7750_QACR1_REGOFS) +#define SH7750_QACR1_A7 SH7750_A7_REG32(SH7750_QACR1_REGOFS) + + +/* + * Exeption-related registers + */ + +/* Immediate data for TRAPA instuction - TRA */ +#define SH7750_TRA_REGOFS 0x000020 /* offset */ +#define SH7750_TRA SH7750_P4_REG32(SH7750_TRA_REGOFS) +#define SH7750_TRA_A7 SH7750_A7_REG32(SH7750_TRA_REGOFS) + +#define SH7750_TRA_IMM 0x000003fd /* Immediate data operand */ +#define SH7750_TRA_IMM_S 2 + +/* Exeption event register - EXPEVT */ +#define SH7750_EXPEVT_REGOFS 0x000024 +#define SH7750_EXPEVT SH7750_P4_REG32(SH7750_EXPEVT_REGOFS) +#define SH7750_EXPEVT_A7 SH7750_A7_REG32(SH7750_EXPEVT_REGOFS) + +#define SH7750_EXPEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_EXPEVT_EX_S 0 + +/* Interrupt event register */ +#define SH7750_INTEVT_REGOFS 0x000028 +#define SH7750_INTEVT SH7750_P4_REG32(SH7750_INTEVT_REGOFS) +#define SH7750_INTEVT_A7 SH7750_A7_REG32(SH7750_INTEVT_REGOFS) +#define SH7750_INTEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_INTEVT_EX_S 0 + +/* + * Exception/interrupt codes + */ +#define SH7750_EVT_TO_NUM(evt) ((evt) >> 5) + +/* Reset exception category */ +#define SH7750_EVT_POWER_ON_RST 0x000 /* Power-on reset */ +#define SH7750_EVT_MANUAL_RST 0x020 /* Manual reset */ +#define SH7750_EVT_TLB_MULT_HIT 0x140 /* TLB multiple-hit exception */ + +/* General exception category */ +#define SH7750_EVT_USER_BREAK 0x1E0 /* User break */ +#define SH7750_EVT_IADDR_ERR 0x0E0 /* Instruction address error */ +#define SH7750_EVT_TLB_READ_MISS 0x040 /* ITLB miss exception / + DTLB miss exception (read) */ +#define SH7750_EVT_TLB_READ_PROTV 0x0A0 /* ITLB protection violation / + DTLB protection violation (read)*/ +#define SH7750_EVT_ILLEGAL_INSTR 0x180 /* General Illegal Instruction + exception */ +#define SH7750_EVT_SLOT_ILLEGAL_INSTR 0x1A0 /* Slot Illegal Instruction + exception */ +#define SH7750_EVT_FPU_DISABLE 0x800 /* General FPU disable exception*/ +#define SH7750_EVT_SLOT_FPU_DISABLE 0x820 /* Slot FPU disable exception */ +#define SH7750_EVT_DATA_READ_ERR 0x0E0 /* Data address error (read) */ +#define SH7750_EVT_DATA_WRITE_ERR 0x100 /* Data address error (write) */ +#define SH7750_EVT_DTLB_WRITE_MISS 0x060 /* DTLB miss exception (write) */ +#define SH7750_EVT_DTLB_WRITE_PROTV 0x0C0 /* DTLB protection violation + exception (write) */ +#define SH7750_EVT_FPU_EXCEPTION 0x120 /* FPU exception */ +#define SH7750_EVT_INITIAL_PGWRITE 0x080 /* Initial Page Write exception */ +#define SH7750_EVT_TRAPA 0x160 /* Unconditional trap (TRAPA) */ + +/* Interrupt exception category */ +#define SH7750_EVT_NMI 0x1C0 /* Non-maskable interrupt */ +#define SH7750_EVT_IRQ0 0x200 /* External Interrupt 0 */ +#define SH7750_EVT_IRQ1 0x220 /* External Interrupt 1 */ +#define SH7750_EVT_IRQ2 0x240 /* External Interrupt 2 */ +#define SH7750_EVT_IRQ3 0x260 /* External Interrupt 3 */ +#define SH7750_EVT_IRQ4 0x280 /* External Interrupt 4 */ +#define SH7750_EVT_IRQ5 0x2A0 /* External Interrupt 5 */ +#define SH7750_EVT_IRQ6 0x2C0 /* External Interrupt 6 */ +#define SH7750_EVT_IRQ7 0x2E0 /* External Interrupt 7 */ +#define SH7750_EVT_IRQ8 0x300 /* External Interrupt 8 */ +#define SH7750_EVT_IRQ9 0x320 /* External Interrupt 9 */ +#define SH7750_EVT_IRQA 0x340 /* External Interrupt A */ +#define SH7750_EVT_IRQB 0x360 /* External Interrupt B */ +#define SH7750_EVT_IRQC 0x380 /* External Interrupt C */ +#define SH7750_EVT_IRQD 0x3A0 /* External Interrupt D */ +#define SH7750_EVT_IRQE 0x3C0 /* External Interrupt E */ + +/* Peripheral Module Interrupts - Timer Unit (TMU) */ +#define SH7750_EVT_TUNI0 0x400 /* TMU Underflow Interrupt 0 */ +#define SH7750_EVT_TUNI1 0x420 /* TMU Underflow Interrupt 1 */ +#define SH7750_EVT_TUNI2 0x440 /* TMU Underflow Interrupt 2 */ +#define SH7750_EVT_TICPI2 0x460 /* TMU Input Capture Interrupt 2*/ + +/* Peripheral Module Interrupts - Real-Time Clock (RTC) */ +#define SH7750_EVT_RTC_ATI 0x480 /* Alarm Interrupt Request */ +#define SH7750_EVT_RTC_PRI 0x4A0 /* Periodic Interrupt Request */ +#define SH7750_EVT_RTC_CUI 0x4C0 /* Carry Interrupt Request */ + +/* Peripheral Module Interrupts - Serial Communication Interface (SCI) */ +#define SH7750_EVT_SCI_ERI 0x4E0 /* Receive Error */ +#define SH7750_EVT_SCI_RXI 0x500 /* Receive Data Register Full */ +#define SH7750_EVT_SCI_TXI 0x520 /* Transmit Data Register Empty */ +#define SH7750_EVT_SCI_TEI 0x540 /* Transmit End */ + +/* Peripheral Module Interrupts - Watchdog Timer (WDT) */ +#define SH7750_EVT_WDT_ITI 0x560 /* Interval Timer Interrupt + (used when WDT operates in + interval timer mode) */ + +/* Peripheral Module Interrupts - Memory Refresh Unit (REF) */ +#define SH7750_EVT_REF_RCMI 0x580 /* Compare-match Interrupt */ +#define SH7750_EVT_REF_ROVI 0x5A0 /* Refresh Counter Overflow + interrupt */ + +/* Peripheral Module Interrupts - Hitachi User Debug Interface (H-UDI) */ +#define SH7750_EVT_HUDI 0x600 /* UDI interrupt */ + +/* Peripheral Module Interrupts - General-Purpose I/O (GPIO) */ +#define SH7750_EVT_GPIO 0x620 /* GPIO Interrupt */ + +/* Peripheral Module Interrupts - DMA Controller (DMAC) */ +#define SH7750_EVT_DMAC_DMTE0 0x640 /* DMAC 0 Transfer End Interrupt*/ +#define SH7750_EVT_DMAC_DMTE1 0x660 /* DMAC 1 Transfer End Interrupt*/ +#define SH7750_EVT_DMAC_DMTE2 0x680 /* DMAC 2 Transfer End Interrupt*/ +#define SH7750_EVT_DMAC_DMTE3 0x6A0 /* DMAC 3 Transfer End Interrupt*/ +#define SH7750_EVT_DMAC_DMAE 0x6C0 /* DMAC Address Error Interrupt */ + +/* Peripheral Module Interrupts - Serial Communication Interface with FIFO */ +/* (SCIF) */ +#define SH7750_EVT_SCIF_ERI 0x700 /* Receive Error */ +#define SH7750_EVT_SCIF_RXI 0x720 /* Receive FIFO Data Full or + Receive Data ready interrupt */ +#define SH7750_EVT_SCIF_BRI 0x740 /* Break or overrun error */ +#define SH7750_EVT_SCIF_TXI 0x760 /* Transmit FIFO Data Empty */ + +/* + * Power Management + */ +#define SH7750_STBCR_REGOFS 0xC00004 /* offset */ +#define SH7750_STBCR SH7750_P4_REG32(SH7750_STBCR_REGOFS) +#define SH7750_STBCR_A7 SH7750_A7_REG32(SH7750_STBCR_REGOFS) + +#define SH7750_STBCR_STBY 0x80 /* Specifies a transition to standby mode: + 0 - Transition to SLEEP mode on SLEEP + 1 - Transition to STANDBY mode on SLEEP*/ +#define SH7750_STBCR_PHZ 0x40 /* State of peripheral module pins in + standby mode: + 0 - normal state + 1 - high-impendance state */ + +#define SH7750_STBCR_PPU 0x20 /* Peripheral module pins pull-up controls*/ +#define SH7750_STBCR_MSTP4 0x10 /* Stopping the clock supply to DMAC */ +#define SH7750_STBCR_DMAC_STP SH7750_STBCR_MSTP4 +#define SH7750_STBCR_MSTP3 0x08 /* Stopping the clock supply to SCIF */ +#define SH7750_STBCR_SCIF_STP SH7750_STBCR_MSTP3 +#define SH7750_STBCR_MSTP2 0x04 /* Stopping the clock supply to TMU */ +#define SH7750_STBCR_TMU_STP SH7750_STBCR_MSTP2 +#define SH7750_STBCR_MSTP1 0x02 /* Stopping the clock supply to RTC */ +#define SH7750_STBCR_RTC_STP SH7750_STBCR_MSTP1 +#define SH7750_STBCR_MSPT0 0x01 /* Stopping the clock supply to SCI */ +#define SH7750_STBCR_SCI_STP SH7750_STBCR_MSTP0 + +#define SH7750_STBCR_STBY 0x80 + + +#define SH7750_STBCR2_REGOFS 0xC00010 /* offset */ +#define SH7750_STBCR2 SH7750_P4_REG32(SH7750_STBCR2_REGOFS) +#define SH7750_STBCR2_A7 SH7750_A7_REG32(SH7750_STBCR2_REGOFS) + +#define SH7750_STBCR2_DSLP 0x80 /* Specifies transition to deep sleep mode: + 0 - transition to sleep or standby mode + as it is specified in STBY bit + 1 - transition to deep sleep mode on + execution of SLEEP instruction */ +#define SH7750_STBCR2_MSTP6 0x02 /* Stopping the clock supply to Store Queue + in the cache controller */ +#define SH7750_STBCR2_SQ_STP SH7750_STBCR2_MSTP6 +#define SH7750_STBCR2_MSTP5 0x01 /* Stopping the clock supply to the User + Break Controller (UBC) */ +#define SH7750_STBCR2_UBC_STP SH7750_STBCR2_MSTP5 + +/* + * Clock Pulse Generator (CPG) + */ +#define SH7750_FRQCR_REGOFS 0xC00000 /* offset */ +#define SH7750_FRQCR SH7750_P4_REG32(SH7750_FRQCR_REGOFS) +#define SH7750_FRQCR_A7 SH7750_A7_REG32(SH7750_FRQCR_REGOFS) + +#define SH7750_FRQCR_CKOEN 0x0800 /* Clock Output Enable + 0 - CKIO pin goes to HiZ/pullup + 1 - Clock is output from CKIO */ +#define SH7750_FRQCR_PLL1EN 0x0400 /* PLL circuit 1 enable */ +#define SH7750_FRQCR_PLL2EN 0x0200 /* PLL circuit 2 enable */ + +#define SH7750_FRQCR_IFC 0x01C0 /* CPU clock frequency division ratio: */ +#define SH7750_FRQCR_IFCDIV1 0x0000 /* 0 - * 1 */ +#define SH7750_FRQCR_IFCDIV2 0x0040 /* 1 - * 1/2 */ +#define SH7750_FRQCR_IFCDIV3 0x0080 /* 2 - * 1/3 */ +#define SH7750_FRQCR_IFCDIV4 0x00C0 /* 3 - * 1/4 */ +#define SH7750_FRQCR_IFCDIV6 0x0100 /* 4 - * 1/6 */ +#define SH7750_FRQCR_IFCDIV8 0x0140 /* 5 - * 1/8 */ + +#define SH7750_FRQCR_BFC 0x0038 /* Bus clock frequency division ratio: */ +#define SH7750_FRQCR_BFCDIV1 0x0000 /* 0 - * 1 */ +#define SH7750_FRQCR_BFCDIV2 0x0008 /* 1 - * 1/2 */ +#define SH7750_FRQCR_BFCDIV3 0x0010 /* 2 - * 1/3 */ +#define SH7750_FRQCR_BFCDIV4 0x0018 /* 3 - * 1/4 */ +#define SH7750_FRQCR_BFCDIV6 0x0020 /* 4 - * 1/6 */ +#define SH7750_FRQCR_BFCDIV8 0x0028 /* 5 - * 1/8 */ + +#define SH7750_FRQCR_PFC 0x0007 /* Peripheral module clock frequency + division ratio: */ +#define SH7750_FRQCR_PFCDIV2 0x0000 /* 0 - * 1/2 */ +#define SH7750_FRQCR_PFCDIV3 0x0001 /* 1 - * 1/3 */ +#define SH7750_FRQCR_PFCDIV4 0x0002 /* 2 - * 1/4 */ +#define SH7750_FRQCR_PFCDIV6 0x0003 /* 3 - * 1/6 */ +#define SH7750_FRQCR_PFCDIV8 0x0004 /* 4 - * 1/8 */ + +/* + * Watchdog Timer (WDT) + */ + +/* Watchdog Timer Counter register - WTCNT */ +#define SH7750_WTCNT_REGOFS 0xC00008 /* offset */ +#define SH7750_WTCNT SH7750_P4_REG32(SH7750_WTCNT_REGOFS) +#define SH7750_WTCNT_A7 SH7750_A7_REG32(SH7750_WTCNT_REGOFS) +#define SH7750_WTCNT_KEY 0x5A00 /* When WTCNT byte register written, + you have to set the upper byte to + 0x5A */ + +/* Watchdog Timer Control/Status register - WTCSR */ +#define SH7750_WTCSR_REGOFS 0xC0000C /* offset */ +#define SH7750_WTCSR SH7750_P4_REG32(SH7750_WTCSR_REGOFS) +#define SH7750_WTCSR_A7 SH7750_A7_REG32(SH7750_WTCSR_REGOFS) +#define SH7750_WTCSR_KEY 0xA500 /* When WTCSR byte register written, + you have to set the upper byte to + 0xA5 */ +#define SH7750_WTCSR_TME 0x80 /* Timer enable (1-upcount start) */ +#define SH7750_WTCSR_MODE 0x40 /* Timer Mode Select: */ +#define SH7750_WTCSR_MODE_WT 0x40 /* Watchdog Timer Mode */ +#define SH7750_WTCSR_MODE_IT 0x00 /* Interval Timer Mode */ +#define SH7750_WTCSR_RSTS 0x20 /* Reset Select: */ +#define SH7750_WTCSR_RST_MAN 0x20 /* Manual Reset */ +#define SH7750_WTCSR_RST_PWR 0x00 /* Power-on Reset */ +#define SH7750_WTCSR_WOVF 0x10 /* Watchdog Timer Overflow Flag */ +#define SH7750_WTCSR_IOVF 0x08 /* Interval Timer Overflow Flag */ +#define SH7750_WTCSR_CKS 0x07 /* Clock Select: */ +#define SH7750_WTCSR_CKS_DIV32 0x00 /* 1/32 of frequency divider 2 input */ +#define SH7750_WTCSR_CKS_DIV64 0x01 /* 1/64 */ +#define SH7750_WTCSR_CKS_DIV128 0x02 /* 1/128 */ +#define SH7750_WTCSR_CKS_DIV256 0x03 /* 1/256 */ +#define SH7750_WTCSR_CKS_DIV512 0x04 /* 1/512 */ +#define SH7750_WTCSR_CKS_DIV1024 0x05 /* 1/1024 */ +#define SH7750_WTCSR_CKS_DIV2048 0x06 /* 1/2048 */ +#define SH7750_WTCSR_CKS_DIV4096 0x07 /* 1/4096 */ + +/* + * Real-Time Clock (RTC) + */ +/* 64-Hz Counter Register (byte, read-only) - R64CNT */ +#define SH7750_R64CNT_REGOFS 0xC80000 /* offset */ +#define SH7750_R64CNT SH7750_P4_REG32(SH7750_R64CNT_REGOFS) +#define SH7750_R64CNT_A7 SH7750_A7_REG32(SH7750_R64CNT_REGOFS) + +/* Second Counter Register (byte, BCD-coded) - RSECCNT */ +#define SH7750_RSECCNT_REGOFS 0xC80004 /* offset */ +#define SH7750_RSECCNT SH7750_P4_REG32(SH7750_RSECCNT_REGOFS) +#define SH7750_RSECCNT_A7 SH7750_A7_REG32(SH7750_RSECCNT_REGOFS) + +/* Minute Counter Register (byte, BCD-coded) - RMINCNT */ +#define SH7750_RMINCNT_REGOFS 0xC80008 /* offset */ +#define SH7750_RMINCNT SH7750_P4_REG32(SH7750_RMINCNT_REGOFS) +#define SH7750_RMINCNT_A7 SH7750_A7_REG32(SH7750_RMINCNT_REGOFS) + +/* Hour Counter Register (byte, BCD-coded) - RHRCNT */ +#define SH7750_RHRCNT_REGOFS 0xC8000C /* offset */ +#define SH7750_RHRCNT SH7750_P4_REG32(SH7750_RHRCNT_REGOFS) +#define SH7750_RHRCNT_A7 SH7750_A7_REG32(SH7750_RHRCNT_REGOFS) + +/* Day-of-Week Counter Register (byte) - RWKCNT */ +#define SH7750_RWKCNT_REGOFS 0xC80010 /* offset */ +#define SH7750_RWKCNT SH7750_P4_REG32(SH7750_RWKCNT_REGOFS) +#define SH7750_RWKCNT_A7 SH7750_A7_REG32(SH7750_RWKCNT_REGOFS) + +#define SH7750_RWKCNT_SUN 0 /* Sunday */ +#define SH7750_RWKCNT_MON 1 /* Monday */ +#define SH7750_RWKCNT_TUE 2 /* Tuesday */ +#define SH7750_RWKCNT_WED 3 /* Wednesday */ +#define SH7750_RWKCNT_THU 4 /* Thursday */ +#define SH7750_RWKCNT_FRI 5 /* Friday */ +#define SH7750_RWKCNT_SAT 6 /* Saturday */ + +/* Day Counter Register (byte, BCD-coded) - RDAYCNT */ +#define SH7750_RDAYCNT_REGOFS 0xC80014 /* offset */ +#define SH7750_RDAYCNT SH7750_P4_REG32(SH7750_RDAYCNT_REGOFS) +#define SH7750_RDAYCNT_A7 SH7750_A7_REG32(SH7750_RDAYCNT_REGOFS) + +/* Month Counter Register (byte, BCD-coded) - RMONCNT */ +#define SH7750_RMONCNT_REGOFS 0xC80018 /* offset */ +#define SH7750_RMONCNT SH7750_P4_REG32(SH7750_RMONCNT_REGOFS) +#define SH7750_RMONCNT_A7 SH7750_A7_REG32(SH7750_RMONCNT_REGOFS) + +/* Year Counter Register (half, BCD-coded) - RYRCNT */ +#define SH7750_RYRCNT_REGOFS 0xC8001C /* offset */ +#define SH7750_RYRCNT SH7750_P4_REG32(SH7750_RYRCNT_REGOFS) +#define SH7750_RYRCNT_A7 SH7750_A7_REG32(SH7750_RYRCNT_REGOFS) + +/* Second Alarm Register (byte, BCD-coded) - RSECAR */ +#define SH7750_RSECAR_REGOFS 0xC80020 /* offset */ +#define SH7750_RSECAR SH7750_P4_REG32(SH7750_RSECAR_REGOFS) +#define SH7750_RSECAR_A7 SH7750_A7_REG32(SH7750_RSECAR_REGOFS) +#define SH7750_RSECAR_ENB 0x80 /* Second Alarm Enable */ + +/* Minute Alarm Register (byte, BCD-coded) - RMINAR */ +#define SH7750_RMINAR_REGOFS 0xC80024 /* offset */ +#define SH7750_RMINAR SH7750_P4_REG32(SH7750_RMINAR_REGOFS) +#define SH7750_RMINAR_A7 SH7750_A7_REG32(SH7750_RMINAR_REGOFS) +#define SH7750_RMINAR_ENB 0x80 /* Minute Alarm Enable */ + +/* Hour Alarm Register (byte, BCD-coded) - RHRAR */ +#define SH7750_RHRAR_REGOFS 0xC80028 /* offset */ +#define SH7750_RHRAR SH7750_P4_REG32(SH7750_RHRAR_REGOFS) +#define SH7750_RHRAR_A7 SH7750_A7_REG32(SH7750_RHRAR_REGOFS) +#define SH7750_RHRAR_ENB 0x80 /* Hour Alarm Enable */ + +/* Day-of-Week Alarm Register (byte) - RWKAR */ +#define SH7750_RWKAR_REGOFS 0xC8002C /* offset */ +#define SH7750_RWKAR SH7750_P4_REG32(SH7750_RWKAR_REGOFS) +#define SH7750_RWKAR_A7 SH7750_A7_REG32(SH7750_RWKAR_REGOFS) +#define SH7750_RWKAR_ENB 0x80 /* Day-of-week Alarm Enable */ + +#define SH7750_RWKAR_SUN 0 /* Sunday */ +#define SH7750_RWKAR_MON 1 /* Monday */ +#define SH7750_RWKAR_TUE 2 /* Tuesday */ +#define SH7750_RWKAR_WED 3 /* Wednesday */ +#define SH7750_RWKAR_THU 4 /* Thursday */ +#define SH7750_RWKAR_FRI 5 /* Friday */ +#define SH7750_RWKAR_SAT 6 /* Saturday */ + +/* Day Alarm Register (byte, BCD-coded) - RDAYAR */ +#define SH7750_RDAYAR_REGOFS 0xC80030 /* offset */ +#define SH7750_RDAYAR SH7750_P4_REG32(SH7750_RDAYAR_REGOFS) +#define SH7750_RDAYAR_A7 SH7750_A7_REG32(SH7750_RDAYAR_REGOFS) +#define SH7750_RDAYAR_ENB 0x80 /* Day Alarm Enable */ + +/* Month Counter Register (byte, BCD-coded) - RMONAR */ +#define SH7750_RMONAR_REGOFS 0xC80034 /* offset */ +#define SH7750_RMONAR SH7750_P4_REG32(SH7750_RMONAR_REGOFS) +#define SH7750_RMONAR_A7 SH7750_A7_REG32(SH7750_RMONAR_REGOFS) +#define SH7750_RMONAR_ENB 0x80 /* Month Alarm Enable */ + +/* RTC Control Register 1 (byte) - RCR1 */ +#define SH7750_RCR1_REGOFS 0xC80038 /* offset */ +#define SH7750_RCR1 SH7750_P4_REG32(SH7750_RCR1_REGOFS) +#define SH7750_RCR1_A7 SH7750_A7_REG32(SH7750_RCR1_REGOFS) +#define SH7750_RCR1_CF 0x80 /* Carry Flag */ +#define SH7750_RCR1_CIE 0x10 /* Carry Interrupt Enable */ +#define SH7750_RCR1_AIE 0x08 /* Alarm Interrupt Enable */ +#define SH7750_RCR1_AF 0x01 /* Alarm Flag */ + +/* RTC Control Register 2 (byte) - RCR2 */ +#define SH7750_RCR2_REGOFS 0xC8003C /* offset */ +#define SH7750_RCR2 SH7750_P4_REG32(SH7750_RCR2_REGOFS) +#define SH7750_RCR2_A7 SH7750_A7_REG32(SH7750_RCR2_REGOFS) +#define SH7750_RCR2_PEF 0x80 /* Periodic Interrupt Flag */ +#define SH7750_RCR2_PES 0x70 /* Periodic Interrupt Enable: */ +#define SH7750_RCR2_PES_DIS 0x00 /* Periodic Interrupt Disabled */ +#define SH7750_RCR2_PES_DIV256 0x10 /* Generated at 1/256 sec interval */ +#define SH7750_RCR2_PES_DIV64 0x20 /* Generated at 1/64 sec interval */ +#define SH7750_RCR2_PES_DIV16 0x30 /* Generated at 1/16 sec interval */ +#define SH7750_RCR2_PES_DIV4 0x40 /* Generated at 1/4 sec interval */ +#define SH7750_RCR2_PES_DIV2 0x50 /* Generated at 1/2 sec interval */ +#define SH7750_RCR2_PES_x1 0x60 /* Generated at 1 sec interval */ +#define SH7750_RCR2_PES_x2 0x70 /* Generated at 2 sec interval */ +#define SH7750_RCR2_RTCEN 0x08 /* RTC Crystal Oscillator is Operated */ +#define SH7750_RCR2_ADJ 0x04 /* 30-Second Adjastment */ +#define SH7750_RCR2_RESET 0x02 /* Frequency divider circuits are reset*/ +#define SH7750_RCR2_START 0x01 /* 0 - sec, min, hr, day-of-week, month, + year counters are stopped + 1 - sec, min, hr, day-of-week, month, + year counters operate normally */ + + +/* + * Timer Unit (TMU) + */ +/* Timer Output Control Register (byte) - TOCR */ +#define SH7750_TOCR_REGOFS 0xD80000 /* offset */ +#define SH7750_TOCR SH7750_P4_REG32(SH7750_TOCR_REGOFS) +#define SH7750_TOCR_A7 SH7750_A7_REG32(SH7750_TOCR_REGOFS) +#define SH7750_TOCR_TCOE 0x01 /* Timer Clock Pin Control: + 0 - TCLK is used as external clock + input or input capture control + 1 - TCLK is used as on-chip RTC + output clock pin */ + +/* Timer Start Register (byte) - TSTR */ +#define SH7750_TSTR_REGOFS 0xD80004 /* offset */ +#define SH7750_TSTR SH7750_P4_REG32(SH7750_TSTR_REGOFS) +#define SH7750_TSTR_A7 SH7750_A7_REG32(SH7750_TSTR_REGOFS) +#define SH7750_TSTR_STR2 0x04 /* TCNT2 performs count operations */ +#define SH7750_TSTR_STR1 0x02 /* TCNT1 performs count operations */ +#define SH7750_TSTR_STR0 0x01 /* TCNT0 performs count operations */ +#define SH7750_TSTR_STR(n) (1 << (n)) + +/* Timer Constant Register - TCOR0, TCOR1, TCOR2 */ +#define SH7750_TCOR_REGOFS(n) (0xD80008 + ((n)*12)) /* offset */ +#define SH7750_TCOR(n) SH7750_P4_REG32(SH7750_TCOR_REGOFS(n)) +#define SH7750_TCOR_A7(n) SH7750_A7_REG32(SH7750_TCOR_REGOFS(n)) +#define SH7750_TCOR0 SH7750_TCOR(0) +#define SH7750_TCOR1 SH7750_TCOR(1) +#define SH7750_TCOR2 SH7750_TCOR(2) +#define SH7750_TCOR0_A7 SH7750_TCOR_A7(0) +#define SH7750_TCOR1_A7 SH7750_TCOR_A7(1) +#define SH7750_TCOR2_A7 SH7750_TCOR_A7(2) + +/* Timer Counter Register - TCNT0, TCNT1, TCNT2 */ +#define SH7750_TCNT_REGOFS(n) (0xD8000C + ((n)*12)) /* offset */ +#define SH7750_TCNT(n) SH7750_P4_REG32(SH7750_TCNT_REGOFS(n)) +#define SH7750_TCNT_A7(n) SH7750_A7_REG32(SH7750_TCNT_REGOFS(n)) +#define SH7750_TCNT0 SH7750_TCNT(0) +#define SH7750_TCNT1 SH7750_TCNT(1) +#define SH7750_TCNT2 SH7750_TCNT(2) +#define SH7750_TCNT0_A7 SH7750_TCNT_A7(0) +#define SH7750_TCNT1_A7 SH7750_TCNT_A7(1) +#define SH7750_TCNT2_A7 SH7750_TCNT_A7(2) + +/* Timer Control Register (half) - TCR0, TCR1, TCR2 */ +#define SH7750_TCR_REGOFS(n) (0xD80010 + ((n)*12)) /* offset */ +#define SH7750_TCR(n) SH7750_P4_REG32(SH7750_TCR_REGOFS(n)) +#define SH7750_TCR_A7(n) SH7750_A7_REG32(SH7750_TCR_REGOFS(n)) +#define SH7750_TCR0 SH7750_TCR(0) +#define SH7750_TCR1 SH7750_TCR(1) +#define SH7750_TCR2 SH7750_TCR(2) +#define SH7750_TCR0_A7 SH7750_TCR_A7(0) +#define SH7750_TCR1_A7 SH7750_TCR_A7(1) +#define SH7750_TCR2_A7 SH7750_TCR_A7(2) + +#define SH7750_TCR2_ICPF 0x200 /* Input Capture Interrupt Flag + (1 - input capture has occured) */ +#define SH7750_TCR_UNF 0x100 /* Underflow flag */ +#define SH7750_TCR2_ICPE 0x0C0 /* Input Capture Control: */ +#define SH7750_TCR2_ICPE_DIS 0x000 /* Input Capture function is not used*/ +#define SH7750_TCR2_ICPE_NOINT 0x080 /* Input Capture function is used, but + input capture interrupt is not + enabled */ +#define SH7750_TCR2_ICPE_INT 0x0C0 /* Input Capture function is used, + input capture interrupt enabled */ +#define SH7750_TCR_UNIE 0x020 /* Underflow Interrupt Control + (1 - underflow interrupt enabled) */ +#define SH7750_TCR_CKEG 0x018 /* Clock Edge selection: */ +#define SH7750_TCR_CKEG_RAISE 0x000 /* Count/capture on rising edge */ +#define SH7750_TCR_CKEG_FALL 0x008 /* Count/capture on falling edge */ +#define SH7750_TCR_CKEG_BOTH 0x018 /* Count/capture on both rising and + falling edges */ +#define SH7750_TCR_TPSC 0x007 /* Timer prescaler */ +#define SH7750_TCR_TPSC_DIV4 0x000 /* Counts on peripheral clock/4 */ +#define SH7750_TCR_TPSC_DIV16 0x001 /* Counts on peripheral clock/16 */ +#define SH7750_TCR_TPSC_DIV64 0x002 /* Counts on peripheral clock/64 */ +#define SH7750_TCR_TPSC_DIV256 0x003 /* Counts on peripheral clock/256 */ +#define SH7750_TCR_TPSC_DIV1024 0x004 /* Counts on peripheral clock/1024 */ +#define SH7750_TCR_TPSC_RTC 0x006 /* Counts on on-chip RTC output clk*/ +#define SH7750_TCR_TPSC_EXT 0x007 /* Counts on external clock */ + +/* Input Capture Register (read-only) - TCPR2 */ +#define SH7750_TCPR2_REGOFS 0xD8002C /* offset */ +#define SH7750_TCPR2 SH7750_P4_REG32(SH7750_TCPR2_REGOFS) +#define SH7750_TCPR2_A7 SH7750_A7_REG32(SH7750_TCPR2_REGOFS) + +/* + * Bus State Controller - BSC + */ +/* Bus Control Register 1 - BCR1 */ +#define SH7750_BCR1_REGOFS 0x800000 /* offset */ +#define SH7750_BCR1 SH7750_P4_REG32(SH7750_BCR1_REGOFS) +#define SH7750_BCR1_A7 SH7750_A7_REG32(SH7750_BCR1_REGOFS) +#define SH7750_BCR1_ENDIAN 0x80000000 /* Endianness (1 - little endian) */ +#define SH7750_BCR1_MASTER 0x40000000 /* Master/Slave mode (1-master) */ +#define SH7750_BCR1_A0MPX 0x20000000 /* Area 0 Memory Type (0-SRAM,1-MPX)*/ +#define SH7750_BCR1_IPUP 0x02000000 /* Input Pin Pull-up Control: + 0 - pull-up resistor is on for + control input pins + 1 - pull-up resistor is off */ +#define SH7750_BCR1_OPUP 0x01000000 /* Output Pin Pull-up Control: + 0 - pull-up resistor is on for + control output pins + 1 - pull-up resistor is off */ +#define SH7750_BCR1_A1MBC 0x00200000 /* Area 1 SRAM Byte Control Mode: + 0 - Area 1 SRAM is set to + normal mode + 1 - Area 1 SRAM is set to byte + control mode */ +#define SH7750_BCR1_A4MBC 0x00100000 /* Area 4 SRAM Byte Control Mode: + 0 - Area 4 SRAM is set to + normal mode + 1 - Area 4 SRAM is set to byte + control mode */ +#define SH7750_BCR1_BREQEN 0x00080000 /* BREQ Enable: + 0 - External requests are not + accepted + 1 - External requests are + accepted */ +#define SH7750_BCR1_PSHR 0x00040000 /* Partial Sharing Bit: + 0 - Master Mode + 1 - Partial-sharing Mode */ +#define SH7750_BCR1_MEMMPX 0x00020000 /* Area 1 to 6 MPX Interface: + 0 - SRAM/burst ROM interface + 1 - MPX interface */ +#define SH7750_BCR1_HIZMEM 0x00008000 /* High Impendance Control. Specifies + the state of A[25:0], BS\, CSn\, + RD/WR\, CE2A\, CE2B\ in standby + mode and when bus is released: + 0 - signals go to High-Z mode + 1 - signals driven */ +#define SH7750_BCR1_HIZCNT 0x00004000 /* High Impendance Control. Specifies + the state of the RAS\, RAS2\, WEn\, + CASn\, DQMn, RD\, CASS\, FRAME\, + RD2\ signals in standby mode and + when bus is released: + 0 - signals go to High-Z mode + 1 - signals driven */ +#define SH7750_BCR1_A0BST 0x00003800 /* Area 0 Burst ROM Control */ +#define SH7750_BCR1_A0BST_SRAM 0x0000 /* Area 0 accessed as SRAM i/f */ +#define SH7750_BCR1_A0BST_ROM4 0x0800 /* Area 0 accessed as burst ROM + interface, 4 cosequtive access*/ +#define SH7750_BCR1_A0BST_ROM8 0x1000 /* Area 0 accessed as burst ROM + interface, 8 cosequtive access*/ +#define SH7750_BCR1_A0BST_ROM16 0x1800 /* Area 0 accessed as burst ROM + interface, 16 cosequtive access*/ +#define SH7750_BCR1_A0BST_ROM32 0x2000 /* Area 0 accessed as burst ROM + interface, 32 cosequtive access*/ + +#define SH7750_BCR1_A5BST 0x00000700 /* Area 5 Burst ROM Control */ +#define SH7750_BCR1_A5BST_SRAM 0x0000 /* Area 5 accessed as SRAM i/f */ +#define SH7750_BCR1_A5BST_ROM4 0x0100 /* Area 5 accessed as burst ROM + interface, 4 cosequtive access*/ +#define SH7750_BCR1_A5BST_ROM8 0x0200 /* Area 5 accessed as burst ROM + interface, 8 cosequtive access*/ +#define SH7750_BCR1_A5BST_ROM16 0x0300 /* Area 5 accessed as burst ROM + interface, 16 cosequtive access*/ +#define SH7750_BCR1_A5BST_ROM32 0x0400 /* Area 5 accessed as burst ROM + interface, 32 cosequtive access*/ + +#define SH7750_BCR1_A6BST 0x000000E0 /* Area 6 Burst ROM Control */ +#define SH7750_BCR1_A6BST_SRAM 0x0000 /* Area 6 accessed as SRAM i/f */ +#define SH7750_BCR1_A6BST_ROM4 0x0020 /* Area 6 accessed as burst ROM + interface, 4 cosequtive access*/ +#define SH7750_BCR1_A6BST_ROM8 0x0040 /* Area 6 accessed as burst ROM + interface, 8 cosequtive access*/ +#define SH7750_BCR1_A6BST_ROM16 0x0060 /* Area 6 accessed as burst ROM + interface, 16 cosequtive access*/ +#define SH7750_BCR1_A6BST_ROM32 0x0080 /* Area 6 accessed as burst ROM + interface, 32 cosequtive access*/ + +#define SH7750_BCR1_DRAMTP 0x001C /* Area 2 and 3 Memory Type */ +#define SH7750_BCR1_DRAMTP_2SRAM_3SRAM 0x0000 /* Area 2 and 3 are SRAM or MPX + interface. */ +#define SH7750_BCR1_DRAMTP_2SRAM_3SDRAM 0x0008 /* Area 2 - SRAM/MPX, Area 3 - + synchronous DRAM */ +#define SH7750_BCR1_DRAMTP_2SDRAM_3SDRAM 0x000C /* Area 2 and 3 are synchronous + DRAM interface */ +#define SH7750_BCR1_DRAMTP_2SRAM_3DRAM 0x0010 /* Area 2 - SRAM/MPX, Area 3 - + DRAM interface */ +#define SH7750_BCR1_DRAMTP_2DRAM_3DRAM 0x0014 /* Area 2 and 3 are DRAM + interface */ + +#define SH7750_BCR1_A56PCM 0x00000001 /* Area 5 and 6 Bus Type: + 0 - SRAM interface + 1 - PCMCIA interface */ + +/* Bus Control Register 2 (half) - BCR2 */ +#define SH7750_BCR2_REGOFS 0x800004 /* offset */ +#define SH7750_BCR2 SH7750_P4_REG32(SH7750_BCR2_REGOFS) +#define SH7750_BCR2_A7 SH7750_A7_REG32(SH7750_BCR2_REGOFS) + +#define SH7750_BCR2_A0SZ 0xC000 /* Area 0 Bus Width */ +#define SH7750_BCR2_A0SZ_S 14 +#define SH7750_BCR2_A6SZ 0x3000 /* Area 6 Bus Width */ +#define SH7750_BCR2_A6SZ_S 12 +#define SH7750_BCR2_A5SZ 0x0C00 /* Area 5 Bus Width */ +#define SH7750_BCR2_A5SZ_S 10 +#define SH7750_BCR2_A4SZ 0x0300 /* Area 4 Bus Width */ +#define SH7750_BCR2_A4SZ_S 8 +#define SH7750_BCR2_A3SZ 0x00C0 /* Area 3 Bus Width */ +#define SH7750_BCR2_A3SZ_S 6 +#define SH7750_BCR2_A2SZ 0x0030 /* Area 2 Bus Width */ +#define SH7750_BCR2_A2SZ_S 4 +#define SH7750_BCR2_A1SZ 0x000C /* Area 1 Bus Width */ +#define SH7750_BCR2_A1SZ_S 2 +#define SH7750_BCR2_SZ_64 0 /* 64 bits */ +#define SH7750_BCR2_SZ_8 1 /* 8 bits */ +#define SH7750_BCR2_SZ_16 2 /* 16 bits */ +#define SH7750_BCR2_SZ_32 3 /* 32 bits */ +#define SH7750_BCR2_PORTEN 0x0001 /* Port Function Enable : + 0 - D51-D32 are not used as a port + 1 - D51-D32 are used as a port */ + +/* Wait Control Register 1 - WCR1 */ +#define SH7750_WCR1_REGOFS 0x800008 /* offset */ +#define SH7750_WCR1 SH7750_P4_REG32(SH7750_WCR1_REGOFS) +#define SH7750_WCR1_A7 SH7750_A7_REG32(SH7750_WCR1_REGOFS) +#define SH7750_WCR1_DMAIW 0x70000000 /* DACK Device Inter-Cycle Idle + specification */ +#define SH7750_WCR1_DMAIW_S 28 +#define SH7750_WCR1_A6IW 0x07000000 /* Area 6 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A6IW_S 24 +#define SH7750_WCR1_A5IW 0x00700000 /* Area 5 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A5IW_S 20 +#define SH7750_WCR1_A4IW 0x00070000 /* Area 4 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A4IW_S 16 +#define SH7750_WCR1_A3IW 0x00007000 /* Area 3 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A3IW_S 12 +#define SH7750_WCR1_A2IW 0x00000700 /* Area 2 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A2IW_S 8 +#define SH7750_WCR1_A1IW 0x00000070 /* Area 1 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A1IW_S 4 +#define SH7750_WCR1_A0IW 0x00000007 /* Area 0 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A0IW_S 0 + +/* Wait Control Register 2 - WCR2 */ +#define SH7750_WCR2_REGOFS 0x80000C /* offset */ +#define SH7750_WCR2 SH7750_P4_REG32(SH7750_WCR2_REGOFS) +#define SH7750_WCR2_A7 SH7750_A7_REG32(SH7750_WCR2_REGOFS) + +#define SH7750_WCR2_A6W 0xE0000000 /* Area 6 Wait Control */ +#define SH7750_WCR2_A6W_S 29 +#define SH7750_WCR2_A6B 0x1C000000 /* Area 6 Burst Pitch */ +#define SH7750_WCR2_A6B_S 26 +#define SH7750_WCR2_A5W 0x03800000 /* Area 5 Wait Control */ +#define SH7750_WCR2_A5W_S 23 +#define SH7750_WCR2_A5B 0x00700000 /* Area 5 Burst Pitch */ +#define SH7750_WCR2_A5B_S 20 +#define SH7750_WCR2_A4W 0x000E0000 /* Area 4 Wait Control */ +#define SH7750_WCR2_A4W_S 17 +#define SH7750_WCR2_A3W 0x0000E000 /* Area 3 Wait Control */ +#define SH7750_WCR2_A3W_S 13 +#define SH7750_WCR2_A2W 0x00000E00 /* Area 2 Wait Control */ +#define SH7750_WCR2_A2W_S 9 +#define SH7750_WCR2_A1W 0x000001C0 /* Area 1 Wait Control */ +#define SH7750_WCR2_A1W_S 6 +#define SH7750_WCR2_A0W 0x00000038 /* Area 0 Wait Control */ +#define SH7750_WCR2_A0W_S 3 +#define SH7750_WCR2_A0B 0x00000007 /* Area 0 Burst Pitch */ +#define SH7750_WCR2_A0B_S 0 + +#define SH7750_WCR2_WS0 0 /* 0 wait states inserted */ +#define SH7750_WCR2_WS1 1 /* 1 wait states inserted */ +#define SH7750_WCR2_WS2 2 /* 2 wait states inserted */ +#define SH7750_WCR2_WS3 3 /* 3 wait states inserted */ +#define SH7750_WCR2_WS6 4 /* 6 wait states inserted */ +#define SH7750_WCR2_WS9 5 /* 9 wait states inserted */ +#define SH7750_WCR2_WS12 6 /* 12 wait states inserted */ +#define SH7750_WCR2_WS15 7 /* 15 wait states inserted */ + +#define SH7750_WCR2_BPWS0 0 /* 0 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS1 1 /* 1 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS2 2 /* 2 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS3 3 /* 3 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS4 4 /* 4 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS5 5 /* 5 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS6 6 /* 6 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS7 7 /* 7 wait states inserted from 2nd access */ + +/* DRAM CAS\ Assertion Delay (area 3,2) */ +#define SH7750_WCR2_DRAM_CAS_ASW1 0 /* 1 cycle */ +#define SH7750_WCR2_DRAM_CAS_ASW2 1 /* 2 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW3 2 /* 3 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW4 3 /* 4 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW7 4 /* 7 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW10 5 /* 10 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW13 6 /* 13 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW16 7 /* 16 cycles */ + +/* SDRAM CAS\ Latency Cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT1 1 /* 1 cycle */ +#define SH7750_WCR2_SDRAM_CAS_LAT2 2 /* 2 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT3 3 /* 3 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT4 4 /* 4 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT5 5 /* 5 cycles */ + +/* Wait Control Register 3 - WCR3 */ +#define SH7750_WCR3_REGOFS 0x800010 /* offset */ +#define SH7750_WCR3 SH7750_P4_REG32(SH7750_WCR3_REGOFS) +#define SH7750_WCR3_A7 SH7750_A7_REG32(SH7750_WCR3_REGOFS) + +#define SH7750_WCR3_A6S 0x04000000 /* Area 6 Write Strobe Setup time */ +#define SH7750_WCR3_A6H 0x03000000 /* Area 6 Data Hold Time */ +#define SH7750_WCR3_A6H_S 24 +#define SH7750_WCR3_A5S 0x00400000 /* Area 5 Write Strobe Setup time */ +#define SH7750_WCR3_A5H 0x00300000 /* Area 5 Data Hold Time */ +#define SH7750_WCR3_A5H_S 20 +#define SH7750_WCR3_A4S 0x00040000 /* Area 4 Write Strobe Setup time */ +#define SH7750_WCR3_A4H 0x00030000 /* Area 4 Data Hold Time */ +#define SH7750_WCR3_A4H_S 16 +#define SH7750_WCR3_A3S 0x00004000 /* Area 3 Write Strobe Setup time */ +#define SH7750_WCR3_A3H 0x00003000 /* Area 3 Data Hold Time */ +#define SH7750_WCR3_A3H_S 12 +#define SH7750_WCR3_A2S 0x00000400 /* Area 2 Write Strobe Setup time */ +#define SH7750_WCR3_A2H 0x00000300 /* Area 2 Data Hold Time */ +#define SH7750_WCR3_A2H_S 8 +#define SH7750_WCR3_A1S 0x00000040 /* Area 1 Write Strobe Setup time */ +#define SH7750_WCR3_A1H 0x00000030 /* Area 1 Data Hold Time */ +#define SH7750_WCR3_A1H_S 4 +#define SH7750_WCR3_A0S 0x00000004 /* Area 0 Write Strobe Setup time */ +#define SH7750_WCR3_A0H 0x00000003 /* Area 0 Data Hold Time */ +#define SH7750_WCR3_A0H_S 0 + +#define SH7750_WCR3_DHWS_0 0 /* 0 wait states data hold time */ +#define SH7750_WCR3_DHWS_1 1 /* 1 wait states data hold time */ +#define SH7750_WCR3_DHWS_2 2 /* 2 wait states data hold time */ +#define SH7750_WCR3_DHWS_3 3 /* 3 wait states data hold time */ + +#define SH7750_MCR_REGOFS 0x800014 /* offset */ +#define SH7750_MCR SH7750_P4_REG32(SH7750_MCR_REGOFS) +#define SH7750_MCR_A7 SH7750_A7_REG32(SH7750_MCR_REGOFS) + +#define SH7750_MCR_RASD 0x80000000 /* RAS Down mode */ +#define SH7750_MCR_MRSET 0x40000000 /* SDRAM Mode Register Set */ +#define SH7750_MCR_PALL 0x00000000 /* SDRAM Precharge All cmd. Mode */ +#define SH7750_MCR_TRC 0x38000000 /* RAS Precharge Time at End of + Refresh: */ +#define SH7750_MCR_TRC_0 0x00000000 /* 0 */ +#define SH7750_MCR_TRC_3 0x08000000 /* 3 */ +#define SH7750_MCR_TRC_6 0x10000000 /* 6 */ +#define SH7750_MCR_TRC_9 0x18000000 /* 9 */ +#define SH7750_MCR_TRC_12 0x20000000 /* 12 */ +#define SH7750_MCR_TRC_15 0x28000000 /* 15 */ +#define SH7750_MCR_TRC_18 0x30000000 /* 18 */ +#define SH7750_MCR_TRC_21 0x38000000 /* 21 */ + +#define SH7750_MCR_TCAS 0x00800000 /* CAS Negation Period */ +#define SH7750_MCR_TCAS_1 0x00000000 /* 1 */ +#define SH7750_MCR_TCAS_2 0x00800000 /* 2 */ + +#define SH7750_MCR_TPC 0x00380000 /* DRAM: RAS Precharge Period + SDRAM: minimum number of cycles + until the next bank active cmd + is output after precharging */ +#define SH7750_MCR_TPC_S 19 +#define SH7750_MCR_TPC_SDRAM_1 0x00000000 /* 1 cycle */ +#define SH7750_MCR_TPC_SDRAM_2 0x00080000 /* 2 cycles */ +#define SH7750_MCR_TPC_SDRAM_3 0x00100000 /* 3 cycles */ +#define SH7750_MCR_TPC_SDRAM_4 0x00180000 /* 4 cycles */ +#define SH7750_MCR_TPC_SDRAM_5 0x00200000 /* 5 cycles */ +#define SH7750_MCR_TPC_SDRAM_6 0x00280000 /* 6 cycles */ +#define SH7750_MCR_TPC_SDRAM_7 0x00300000 /* 7 cycles */ +#define SH7750_MCR_TPC_SDRAM_8 0x00380000 /* 8 cycles */ + +#define SH7750_MCR_RCD 0x00030000 /* DRAM: RAS-CAS Assertion Delay time + SDRAM: bank active-read/write cmd + delay time */ +#define SH7750_MCR_RCD_DRAM_2 0x00000000 /* DRAM delay 2 clocks */ +#define SH7750_MCR_RCD_DRAM_3 0x00010000 /* DRAM delay 3 clocks */ +#define SH7750_MCR_RCD_DRAM_4 0x00020000 /* DRAM delay 4 clocks */ +#define SH7750_MCR_RCD_DRAM_5 0x00030000 /* DRAM delay 5 clocks */ +#define SH7750_MCR_RCD_SDRAM_2 0x00010000 /* DRAM delay 2 clocks */ +#define SH7750_MCR_RCD_SDRAM_3 0x00020000 /* DRAM delay 3 clocks */ +#define SH7750_MCR_RCD_SDRAM_4 0x00030000 /* DRAM delay 4 clocks */ + +#define SH7750_MCR_TRWL 0x0000E000 /* SDRAM Write Precharge Delay */ +#define SH7750_MCR_TRWL_1 0x00000000 /* 1 */ +#define SH7750_MCR_TRWL_2 0x00002000 /* 2 */ +#define SH7750_MCR_TRWL_3 0x00004000 /* 3 */ +#define SH7750_MCR_TRWL_4 0x00006000 /* 4 */ +#define SH7750_MCR_TRWL_5 0x00008000 /* 5 */ + +#define SH7750_MCR_TRAS 0x00001C00 /* DRAM: CAS-Before-RAS Refresh RAS + asserting period + SDRAM: Command interval after + synchronous DRAM refresh */ +#define SH7750_MCR_TRAS_DRAM_2 0x00000000 /* 2 */ +#define SH7750_MCR_TRAS_DRAM_3 0x00000400 /* 3 */ +#define SH7750_MCR_TRAS_DRAM_4 0x00000800 /* 4 */ +#define SH7750_MCR_TRAS_DRAM_5 0x00000C00 /* 5 */ +#define SH7750_MCR_TRAS_DRAM_6 0x00001000 /* 6 */ +#define SH7750_MCR_TRAS_DRAM_7 0x00001400 /* 7 */ +#define SH7750_MCR_TRAS_DRAM_8 0x00001800 /* 8 */ +#define SH7750_MCR_TRAS_DRAM_9 0x00001C00 /* 9 */ + +#define SH7750_MCR_TRAS_SDRAM_TRC_4 0x00000000 /* 4 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_5 0x00000400 /* 5 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_6 0x00000800 /* 6 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_7 0x00000C00 /* 7 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_8 0x00001000 /* 8 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_9 0x00001400 /* 9 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_10 0x00001800 /* 10 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_11 0x00001C00 /* 11 + TRC */ + +#define SH7750_MCR_BE 0x00000200 /* Burst Enable */ +#define SH7750_MCR_SZ 0x00000180 /* Memory Data Size */ +#define SH7750_MCR_SZ_64 0x00000000 /* 64 bits */ +#define SH7750_MCR_SZ_16 0x00000100 /* 16 bits */ +#define SH7750_MCR_SZ_32 0x00000180 /* 32 bits */ + +#define SH7750_MCR_AMX 0x00000078 /* Address Multiplexing */ +#define SH7750_MCR_AMX_S 3 +#define SH7750_MCR_AMX_DRAM_8BIT_COL 0x00000000 /* 8-bit column addr */ +#define SH7750_MCR_AMX_DRAM_9BIT_COL 0x00000008 /* 9-bit column addr */ +#define SH7750_MCR_AMX_DRAM_10BIT_COL 0x00000010 /* 10-bit column addr */ +#define SH7750_MCR_AMX_DRAM_11BIT_COL 0x00000018 /* 11-bit column addr */ +#define SH7750_MCR_AMX_DRAM_12BIT_COL 0x00000020 /* 12-bit column addr */ +/* See SH7750 Hardware Manual for SDRAM address multiplexor selection */ + +#define SH7750_MCR_RFSH 0x00000004 /* Refresh Control */ +#define SH7750_MCR_RMODE 0x00000002 /* Refresh Mode: */ +#define SH7750_MCR_RMODE_NORMAL 0x00000000 /* Normal Refresh Mode */ +#define SH7750_MCR_RMODE_SELF 0x00000002 /* Self-Refresh Mode */ +#define SH7750_MCR_RMODE_EDO 0x00000001 /* EDO Mode */ + +/* SDRAM Mode Set address */ +#define SH7750_SDRAM_MODE_A2_BASE 0xFF900000 +#define SH7750_SDRAM_MODE_A3_BASE 0xFF940000 +#define SH7750_SDRAM_MODE_A2_32BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 2)) +#define SH7750_SDRAM_MODE_A3_32BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 2)) +#define SH7750_SDRAM_MODE_A2_64BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 3)) +#define SH7750_SDRAM_MODE_A3_64BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 3)) + + +/* PCMCIA Control Register (half) - PCR */ +#define SH7750_PCR_REGOFS 0x800018 /* offset */ +#define SH7750_PCR SH7750_P4_REG32(SH7750_PCR_REGOFS) +#define SH7750_PCR_A7 SH7750_A7_REG32(SH7750_PCR_REGOFS) + +#define SH7750_PCR_A5PCW 0xC000 /* Area 5 PCMCIA Wait - Number of wait + states to be added to the number of + waits specified by WCR2 in a low-speed + PCMCIA wait cycle */ +#define SH7750_PCR_A5PCW_0 0x0000 /* 0 waits inserted */ +#define SH7750_PCR_A5PCW_15 0x4000 /* 15 waits inserted */ +#define SH7750_PCR_A5PCW_30 0x8000 /* 30 waits inserted */ +#define SH7750_PCR_A5PCW_50 0xC000 /* 50 waits inserted */ + +#define SH7750_PCR_A6PCW 0x3000 /* Area 6 PCMCIA Wait - Number of wait + states to be added to the number of + waits specified by WCR2 in a low-speed + PCMCIA wait cycle */ +#define SH7750_PCR_A6PCW_0 0x0000 /* 0 waits inserted */ +#define SH7750_PCR_A6PCW_15 0x1000 /* 15 waits inserted */ +#define SH7750_PCR_A6PCW_30 0x2000 /* 30 waits inserted */ +#define SH7750_PCR_A6PCW_50 0x3000 /* 50 waits inserted */ + +#define SH7750_PCR_A5TED 0x0E00 /* Area 5 Address-OE\/WE\ Assertion Delay, + delay time from address output to + OE\/WE\ assertion on the connected + PCMCIA interface */ +#define SH7750_PCR_A5TED_S 9 +#define SH7750_PCR_A6TED 0x01C0 /* Area 6 Address-OE\/WE\ Assertion Delay*/ +#define SH7750_PCR_A6TED_S 6 + +#define SH7750_PCR_TED_0WS 0 /* 0 Waits inserted */ +#define SH7750_PCR_TED_1WS 1 /* 1 Waits inserted */ +#define SH7750_PCR_TED_2WS 2 /* 2 Waits inserted */ +#define SH7750_PCR_TED_3WS 3 /* 3 Waits inserted */ +#define SH7750_PCR_TED_6WS 4 /* 6 Waits inserted */ +#define SH7750_PCR_TED_9WS 5 /* 9 Waits inserted */ +#define SH7750_PCR_TED_12WS 6 /* 12 Waits inserted */ +#define SH7750_PCR_TED_15WS 7 /* 15 Waits inserted */ + +#define SH7750_PCR_A5TEH 0x0038 /* Area 5 OE\/WE\ Negation Address delay, + address hold delay time from OE\/WE\ + negation in a write on the connected + PCMCIA interface */ +#define SH7750_PCR_A5TEH_S 3 + +#define SH7750_PCR_A6TEH 0x0007 /* Area 6 OE\/WE\ Negation Address delay*/ +#define SH7750_PCR_A6TEH_S 0 + +#define SH7750_PCR_TEH_0WS 0 /* 0 Waits inserted */ +#define SH7750_PCR_TEH_1WS 1 /* 1 Waits inserted */ +#define SH7750_PCR_TEH_2WS 2 /* 2 Waits inserted */ +#define SH7750_PCR_TEH_3WS 3 /* 3 Waits inserted */ +#define SH7750_PCR_TEH_6WS 4 /* 6 Waits inserted */ +#define SH7750_PCR_TEH_9WS 5 /* 9 Waits inserted */ +#define SH7750_PCR_TEH_12WS 6 /* 12 Waits inserted */ +#define SH7750_PCR_TEH_15WS 7 /* 15 Waits inserted */ + +/* Refresh Timer Control/Status Register (half) - RTSCR */ +#define SH7750_RTCSR_REGOFS 0x80001C /* offset */ +#define SH7750_RTCSR SH7750_P4_REG32(SH7750_RTCSR_REGOFS) +#define SH7750_RTCSR_A7 SH7750_A7_REG32(SH7750_RTCSR_REGOFS) + +#define SH7750_RTCSR_KEY 0xA500 /* RTCSR write key */ +#define SH7750_RTCSR_CMF 0x0080 /* Compare-Match Flag (indicates a + match between the refresh timer + counter and refresh time constant) */ +#define SH7750_RTCSR_CMIE 0x0040 /* Compare-Match Interrupt Enable */ +#define SH7750_RTCSR_CKS 0x0038 /* Refresh Counter Clock Selects */ +#define SH7750_RTCSR_CKS_DIS 0x0000 /* Clock Input Disabled */ +#define SH7750_RTCSR_CKS_CKIO_DIV4 0x0008 /* Bus Clock / 4 */ +#define SH7750_RTCSR_CKS_CKIO_DIV16 0x0010 /* Bus Clock / 16 */ +#define SH7750_RTCSR_CKS_CKIO_DIV64 0x0018 /* Bus Clock / 64 */ +#define SH7750_RTCSR_CKS_CKIO_DIV256 0x0020 /* Bus Clock / 256 */ +#define SH7750_RTCSR_CKS_CKIO_DIV1024 0x0028 /* Bus Clock / 1024 */ +#define SH7750_RTCSR_CKS_CKIO_DIV2048 0x0030 /* Bus Clock / 2048 */ +#define SH7750_RTCSR_CKS_CKIO_DIV4096 0x0038 /* Bus Clock / 4096 */ + +#define SH7750_RTCSR_OVF 0x0004 /* Refresh Count Overflow Flag */ +#define SH7750_RTCSR_OVIE 0x0002 /* Refresh Count Overflow Interrupt + Enable */ +#define SH7750_RTCSR_LMTS 0x0001 /* Refresh Count Overflow Limit Select */ +#define SH7750_RTCSR_LMTS_1024 0x0000 /* Count Limit is 1024 */ +#define SH7750_RTCSR_LMTS_512 0x0001 /* Count Limit is 512 */ + +/* Refresh Timer Counter (half) - RTCNT */ +#define SH7750_RTCNT_REGOFS 0x800020 /* offset */ +#define SH7750_RTCNT SH7750_P4_REG32(SH7750_RTCNT_REGOFS) +#define SH7750_RTCNT_A7 SH7750_A7_REG32(SH7750_RTCNT_REGOFS) + +#define SH7750_RTCNT_KEY 0xA500 /* RTCNT write key */ + +/* Refresh Time Constant Register (half) - RTCOR */ +#define SH7750_RTCOR_REGOFS 0x800024 /* offset */ +#define SH7750_RTCOR SH7750_P4_REG32(SH7750_RTCOR_REGOFS) +#define SH7750_RTCOR_A7 SH7750_A7_REG32(SH7750_RTCOR_REGOFS) + +#define SH7750_RTCOR_KEY 0xA500 /* RTCOR write key */ + +/* Refresh Count Register (half) - RFCR */ +#define SH7750_RFCR_REGOFS 0x800028 /* offset */ +#define SH7750_RFCR SH7750_P4_REG32(SH7750_RFCR_REGOFS) +#define SH7750_RFCR_A7 SH7750_A7_REG32(SH7750_RFCR_REGOFS) + +#define SH7750_RFCR_KEY 0xA400 /* RFCR write key */ + +/* + * Direct Memory Access Controller (DMAC) + */ + +/* DMA Source Address Register - SAR0, SAR1, SAR2, SAR3 */ +#define SH7750_SAR_REGOFS(n) (0xA00000 + ((n)*16)) /* offset */ +#define SH7750_SAR(n) SH7750_P4_REG32(SH7750_SAR_REGOFS(n)) +#define SH7750_SAR_A7(n) SH7750_A7_REG32(SH7750_SAR_REGOFS(n)) +#define SH7750_SAR0 SH7750_SAR(0) +#define SH7750_SAR1 SH7750_SAR(1) +#define SH7750_SAR2 SH7750_SAR(2) +#define SH7750_SAR3 SH7750_SAR(3) +#define SH7750_SAR0_A7 SH7750_SAR_A7(0) +#define SH7750_SAR1_A7 SH7750_SAR_A7(1) +#define SH7750_SAR2_A7 SH7750_SAR_A7(2) +#define SH7750_SAR3_A7 SH7750_SAR_A7(3) + +/* DMA Destination Address Register - DAR0, DAR1, DAR2, DAR3 */ +#define SH7750_DAR_REGOFS(n) (0xA00004 + ((n)*16)) /* offset */ +#define SH7750_DAR(n) SH7750_P4_REG32(SH7750_DAR_REGOFS(n)) +#define SH7750_DAR_A7(n) SH7750_A7_REG32(SH7750_DAR_REGOFS(n)) +#define SH7750_DAR0 SH7750_DAR(0) +#define SH7750_DAR1 SH7750_DAR(1) +#define SH7750_DAR2 SH7750_DAR(2) +#define SH7750_DAR3 SH7750_DAR(3) +#define SH7750_DAR0_A7 SH7750_DAR_A7(0) +#define SH7750_DAR1_A7 SH7750_DAR_A7(1) +#define SH7750_DAR2_A7 SH7750_DAR_A7(2) +#define SH7750_DAR3_A7 SH7750_DAR_A7(3) + +/* DMA Transfer Count Register - DMATCR0, DMATCR1, DMATCR2, DMATCR3 */ +#define SH7750_DMATCR_REGOFS(n) (0xA00008 + ((n)*16)) /* offset */ +#define SH7750_DMATCR(n) SH7750_P4_REG32(SH7750_DMATCR_REGOFS(n)) +#define SH7750_DMATCR_A7(n) SH7750_A7_REG32(SH7750_DMATCR_REGOFS(n)) +#define SH7750_DMATCR0_P4 SH7750_DMATCR(0) +#define SH7750_DMATCR1_P4 SH7750_DMATCR(1) +#define SH7750_DMATCR2_P4 SH7750_DMATCR(2) +#define SH7750_DMATCR3_P4 SH7750_DMATCR(3) +#define SH7750_DMATCR0_A7 SH7750_DMATCR_A7(0) +#define SH7750_DMATCR1_A7 SH7750_DMATCR_A7(1) +#define SH7750_DMATCR2_A7 SH7750_DMATCR_A7(2) +#define SH7750_DMATCR3_A7 SH7750_DMATCR_A7(3) + +/* DMA Channel Control Register - CHCR0, CHCR1, CHCR2, CHCR3 */ +#define SH7750_CHCR_REGOFS(n) (0xA0000C + ((n)*16)) /* offset */ +#define SH7750_CHCR(n) SH7750_P4_REG32(SH7750_CHCR_REGOFS(n)) +#define SH7750_CHCR_A7(n) SH7750_A7_REG32(SH7750_CHCR_REGOFS(n)) +#define SH7750_CHCR0 SH7750_CHCR(0) +#define SH7750_CHCR1 SH7750_CHCR(1) +#define SH7750_CHCR2 SH7750_CHCR(2) +#define SH7750_CHCR3 SH7750_CHCR(3) +#define SH7750_CHCR0_A7 SH7750_CHCR_A7(0) +#define SH7750_CHCR1_A7 SH7750_CHCR_A7(1) +#define SH7750_CHCR2_A7 SH7750_CHCR_A7(2) +#define SH7750_CHCR3_A7 SH7750_CHCR_A7(3) + +#define SH7750_CHCR_SSA 0xE0000000 /* Source Address Space Attribute */ +#define SH7750_CHCR_SSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */ +#define SH7750_CHCR_SSA_DYNBSZ 0x20000000 /* Dynamic Bus Sizing I/O space */ +#define SH7750_CHCR_SSA_IO8 0x40000000 /* 8-bit I/O space */ +#define SH7750_CHCR_SSA_IO16 0x60000000 /* 16-bit I/O space */ +#define SH7750_CHCR_SSA_CMEM8 0x80000000 /* 8-bit common memory space */ +#define SH7750_CHCR_SSA_CMEM16 0xA0000000 /* 16-bit common memory space */ +#define SH7750_CHCR_SSA_AMEM8 0xC0000000 /* 8-bit attribute memory space */ +#define SH7750_CHCR_SSA_AMEM16 0xE0000000 /* 16-bit attribute memory space */ + +#define SH7750_CHCR_STC 0x10000000 /* Source Address Wait Control Select, + specifies CS5 or CS6 space wait + control for PCMCIA access */ + +#define SH7750_CHCR_DSA 0x0E000000 /* Source Address Space Attribute */ +#define SH7750_CHCR_DSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */ +#define SH7750_CHCR_DSA_DYNBSZ 0x02000000 /* Dynamic Bus Sizing I/O space */ +#define SH7750_CHCR_DSA_IO8 0x04000000 /* 8-bit I/O space */ +#define SH7750_CHCR_DSA_IO16 0x06000000 /* 16-bit I/O space */ +#define SH7750_CHCR_DSA_CMEM8 0x08000000 /* 8-bit common memory space */ +#define SH7750_CHCR_DSA_CMEM16 0x0A000000 /* 16-bit common memory space */ +#define SH7750_CHCR_DSA_AMEM8 0x0C000000 /* 8-bit attribute memory space */ +#define SH7750_CHCR_DSA_AMEM16 0x0E000000 /* 16-bit attribute memory space */ + +#define SH7750_CHCR_DTC 0x01000000 /* Destination Address Wait Control + Select, specifies CS5 or CS6 + space wait control for PCMCIA + access */ + +#define SH7750_CHCR_DS 0x00080000 /* DREQ\ Select : */ +#define SH7750_CHCR_DS_LOWLVL 0x00000000 /* Low Level Detection */ +#define SH7750_CHCR_DS_FALL 0x00080000 /* Falling Edge Detection */ + +#define SH7750_CHCR_RL 0x00040000 /* Request Check Level: */ +#define SH7750_CHCR_RL_ACTH 0x00000000 /* DRAK is an active high out */ +#define SH7750_CHCR_RL_ACTL 0x00040000 /* DRAK is an active low out */ + +#define SH7750_CHCR_AM 0x00020000 /* Acknowledge Mode: */ +#define SH7750_CHCR_AM_RD 0x00000000 /* DACK is output in read cycle */ +#define SH7750_CHCR_AM_WR 0x00020000 /* DACK is output in write cycle*/ + +#define SH7750_CHCR_AL 0x00010000 /* Acknowledge Level: */ +#define SH7750_CHCR_AL_ACTH 0x00000000 /* DACK is an active high out */ +#define SH7750_CHCR_AL_ACTL 0x00010000 /* DACK is an active low out */ + +#define SH7750_CHCR_DM 0x0000C000 /* Destination Address Mode: */ +#define SH7750_CHCR_DM_FIX 0x00000000 /* Destination Addr Fixed */ +#define SH7750_CHCR_DM_INC 0x00004000 /* Destination Addr Incremented */ +#define SH7750_CHCR_DM_DEC 0x00008000 /* Destination Addr Decremented */ + +#define SH7750_CHCR_SM 0x00003000 /* Source Address Mode: */ +#define SH7750_CHCR_SM_FIX 0x00000000 /* Source Addr Fixed */ +#define SH7750_CHCR_SM_INC 0x00001000 /* Source Addr Incremented */ +#define SH7750_CHCR_SM_DEC 0x00002000 /* Source Addr Decremented */ + +#define SH7750_CHCR_RS 0x00000F00 /* Request Source Select: */ +#define SH7750_CHCR_RS_ER_DA_EA_TO_EA 0x000 /* External Request, Dual Address + Mode (External Addr Space-> + External Addr Space) */ +#define SH7750_CHCR_RS_ER_SA_EA_TO_ED 0x200 /* External Request, Single + Address Mode (External Addr + Space -> External Device) */ +#define SH7750_CHCR_RS_ER_SA_ED_TO_EA 0x300 /* External Request, Single + Address Mode, (External + Device -> External Addr + Space)*/ +#define SH7750_CHCR_RS_AR_EA_TO_EA 0x400 /* Auto-Request (External Addr + Space -> External Addr Space)*/ + +#define SH7750_CHCR_RS_AR_EA_TO_OCP 0x500 /* Auto-Request (External Addr + Space -> On-chip Peripheral + Module) */ +#define SH7750_CHCR_RS_AR_OCP_TO_EA 0x600 /* Auto-Request (On-chip + Peripheral Module -> + External Addr Space */ +#define SH7750_CHCR_RS_SCITX_EA_TO_SC 0x800 /* SCI Transmit-Data-Empty intr + transfer request (external + address space -> SCTDR1) */ +#define SH7750_CHCR_RS_SCIRX_SC_TO_EA 0x900 /* SCI Receive-Data-Full intr + transfer request (SCRDR1 -> + External Addr Space) */ +#define SH7750_CHCR_RS_SCIFTX_EA_TO_SC 0xA00 /* SCIF Transmit-Data-Empty intr + transfer request (external + address space -> SCFTDR1) */ +#define SH7750_CHCR_RS_SCIFRX_SC_TO_EA 0xB00 /* SCIF Receive-Data-Full intr + transfer request (SCFRDR2 -> + External Addr Space) */ +#define SH7750_CHCR_RS_TMU2_EA_TO_EA 0xC00 /* TMU Channel 2 (input capture + interrupt), (external address + space -> external address + space) */ +#define SH7750_CHCR_RS_TMU2_EA_TO_OCP 0xD00 /* TMU Channel 2 (input capture + interrupt), (external address + space -> on-chip peripheral + module) */ +#define SH7750_CHCR_RS_TMU2_OCP_TO_EA 0xE00 /* TMU Channel 2 (input capture + interrupt), (on-chip + peripheral module -> external + address space) */ + +#define SH7750_CHCR_TM 0x00000080 /* Transmit mode: */ +#define SH7750_CHCR_TM_CSTEAL 0x00000000 /* Cycle Steal Mode */ +#define SH7750_CHCR_TM_BURST 0x00000080 /* Burst Mode */ + +#define SH7750_CHCR_TS 0x00000070 /* Transmit Size: */ +#define SH7750_CHCR_TS_QUAD 0x00000000 /* Quadword Size (64 bits) */ +#define SH7750_CHCR_TS_BYTE 0x00000010 /* Byte Size (8 bit) */ +#define SH7750_CHCR_TS_WORD 0x00000020 /* Word Size (16 bit) */ +#define SH7750_CHCR_TS_LONG 0x00000030 /* Longword Size (32 bit) */ +#define SH7750_CHCR_TS_BLOCK 0x00000040 /* 32-byte block transfer */ + +#define SH7750_CHCR_IE 0x00000004 /* Interrupt Enable */ +#define SH7750_CHCR_TE 0x00000002 /* Transfer End */ +#define SH7750_CHCR_DE 0x00000001 /* DMAC Enable */ + +/* DMA Operation Register - DMAOR */ +#define SH7750_DMAOR_REGOFS 0xA00040 /* offset */ +#define SH7750_DMAOR SH7750_P4_REG32(SH7750_DMAOR_REGOFS) +#define SH7750_DMAOR_A7 SH7750_A7_REG32(SH7750_DMAOR_REGOFS) + +#define SH7750_DMAOR_DDT 0x00008000 /* On-Demand Data Transfer Mode */ + +#define SH7750_DMAOR_PR 0x00000300 /* Priority Mode: */ +#define SH7750_DMAOR_PR_0123 0x00000000 /* CH0 > CH1 > CH2 > CH3 */ +#define SH7750_DMAOR_PR_0231 0x00000100 /* CH0 > CH2 > CH3 > CH1 */ +#define SH7750_DMAOR_PR_2013 0x00000200 /* CH2 > CH0 > CH1 > CH3 */ +#define SH7750_DMAOR_PR_RR 0x00000300 /* Round-robin mode */ + +#define SH7750_DMAOR_COD 0x00000010 /* Check Overrun for DREQ\ */ +#define SH7750_DMAOR_AE 0x00000004 /* Address Error flag */ +#define SH7750_DMAOR_NMIF 0x00000002 /* NMI Flag */ +#define SH7750_DMAOR_DME 0x00000001 /* DMAC Master Enable */ + +/* + * Serial Communication Interface - SCI + * Serial Communication Interface with FIFO - SCIF + */ +/* SCI Receive Data Register (byte, read-only) - SCRDR1, SCFRDR2 */ +#define SH7750_SCRDR_REGOFS(n) ((n) == 1 ? 0xE00014 : 0xE80014) /* offset */ +#define SH7750_SCRDR(n) SH7750_P4_REG32(SH7750_SCRDR_REGOFS(n)) +#define SH7750_SCRDR1 SH7750_SCRDR(1) +#define SH7750_SCRDR2 SH7750_SCRDR(2) +#define SH7750_SCRDR_A7(n) SH7750_A7_REG32(SH7750_SCRDR_REGOFS(n)) +#define SH7750_SCRDR1_A7 SH7750_SCRDR_A7(1) +#define SH7750_SCRDR2_A7 SH7750_SCRDR_A7(2) + +/* SCI Transmit Data Register (byte) - SCTDR1, SCFTDR2 */ +#define SH7750_SCTDR_REGOFS(n) ((n) == 1 ? 0xE0000C : 0xE8000C) /* offset */ +#define SH7750_SCTDR(n) SH7750_P4_REG32(SH7750_SCTDR_REGOFS(n)) +#define SH7750_SCTDR1 SH7750_SCTDR(1) +#define SH7750_SCTDR2 SH7750_SCTDR(2) +#define SH7750_SCTDR_A7(n) SH7750_A7_REG32(SH7750_SCTDR_REGOFS(n)) +#define SH7750_SCTDR1_A7 SH7750_SCTDR_A7(1) +#define SH7750_SCTDR2_A7 SH7750_SCTDR_A7(2) + +/* SCI Serial Mode Register - SCSMR1(byte), SCSMR2(half) */ +#define SH7750_SCSMR_REGOFS(n) ((n) == 1 ? 0xE00000 : 0xE80000) /* offset */ +#define SH7750_SCSMR(n) SH7750_P4_REG32(SH7750_SCSMR_REGOFS(n)) +#define SH7750_SCSMR1 SH7750_SCSMR(1) +#define SH7750_SCSMR2 SH7750_SCSMR(2) +#define SH7750_SCSMR_A7(n) SH7750_A7_REG32(SH7750_SCSMR_REGOFS(n)) +#define SH7750_SCSMR1_A7 SH7750_SCSMR_A7(1) +#define SH7750_SCSMR2_A7 SH7750_SCSMR_A7(2) + +#define SH7750_SCSMR1_CA 0x80 /* Communication Mode (C/A\): */ +#define SH7750_SCSMR1_CA_ASYNC 0x00 /* Asynchronous Mode */ +#define SH7750_SCSMR1_CA_SYNC 0x80 /* Synchronous Mode */ +#define SH7750_SCSMR_CHR 0x40 /* Character Length: */ +#define SH7750_SCSMR_CHR_8 0x00 /* 8-bit data */ +#define SH7750_SCSMR_CHR_7 0x40 /* 7-bit data */ +#define SH7750_SCSMR_PE 0x20 /* Parity Enable */ +#define SH7750_SCSMR_PM 0x10 /* Parity Mode: */ +#define SH7750_SCSMR_PM_EVEN 0x00 /* Even Parity */ +#define SH7750_SCSMR_PM_ODD 0x10 /* Odd Parity */ +#define SH7750_SCSMR_STOP 0x08 /* Stop Bit Length: */ +#define SH7750_SCSMR_STOP_1 0x00 /* 1 stop bit */ +#define SH7750_SCSMR_STOP_2 0x08 /* 2 stop bit */ +#define SH7750_SCSMR1_MP 0x04 /* Multiprocessor Mode */ +#define SH7750_SCSMR_CKS 0x03 /* Clock Select */ +#define SH7750_SCSMR_CKS_DIV1 0x00 /* Periph clock */ +#define SH7750_SCSMR_CKS_DIV4 0x01 /* Periph clock / 4 */ +#define SH7750_SCSMR_CKS_DIV16 0x02 /* Periph clock / 16 */ +#define SH7750_SCSMR_CKS_DIV64 0x03 /* Periph clock / 64 */ + +/* SCI Serial Control Register - SCSCR1(byte), SCSCR2(half) */ +#define SH7750_SCSCR_REGOFS(n) ((n) == 1 ? 0xE00008 : 0xE80008) /* offset */ +#define SH7750_SCSCR(n) SH7750_P4_REG32(SH7750_SCSCR_REGOFS(n)) +#define SH7750_SCSCR1 SH7750_SCSCR(1) +#define SH7750_SCSCR2 SH7750_SCSCR(2) +#define SH7750_SCSCR_A7(n) SH7750_A7_REG32(SH7750_SCSCR_REGOFS(n)) +#define SH7750_SCSCR1_A7 SH7750_SCSCR_A7(1) +#define SH7750_SCSCR2_A7 SH7750_SCSCR_A7(2) + +#define SH7750_SCSCR_TIE 0x80 /* Transmit Interrupt Enable */ +#define SH7750_SCSCR_RIE 0x40 /* Receive Interrupt Enable */ +#define SH7750_SCSCR_TE 0x20 /* Transmit Enable */ +#define SH7750_SCSCR_RE 0x10 /* Receive Enable */ +#define SH7750_SCSCR1_MPIE 0x08 /* Multiprocessor Interrupt Enable */ +#define SH7750_SCSCR2_REIE 0x08 /* Receive Error Interrupt Enable */ +#define SH7750_SCSCR1_TEIE 0x04 /* Transmit End Interrupt Enable */ +#define SH7750_SCSCR1_CKE 0x03 /* Clock Enable: */ +#define SH7750_SCSCR_CKE_INTCLK 0x00 /* Use Internal Clock */ +#define SH7750_SCSCR_CKE_EXTCLK 0x02 /* Use External Clock from SCK*/ +#define SH7750_SCSCR1_CKE_ASYNC_SCK_CLKOUT 0x01 /* Use SCK as a clock output + in asynchronous mode */ + +/* SCI Serial Status Register - SCSSR1(byte), SCSSR2(half) */ +#define SH7750_SCSSR_REGOFS(n) ((n) == 1 ? 0xE00010 : 0xE80010) /* offset */ +#define SH7750_SCSSR(n) SH7750_P4_REG32(SH7750_SCSSR_REGOFS(n)) +#define SH7750_SCSSR1 SH7750_SCSSR(1) +#define SH7750_SCSSR2 SH7750_SCSSR(2) +#define SH7750_SCSSR_A7(n) SH7750_A7_REG32(SH7750_SCSSR_REGOFS(n)) +#define SH7750_SCSSR1_A7 SH7750_SCSSR_A7(1) +#define SH7750_SCSSR2_A7 SH7750_SCSSR_A7(2) + +#define SH7750_SCSSR1_TDRE 0x80 /* Transmit Data Register Empty */ +#define SH7750_SCSSR1_RDRF 0x40 /* Receive Data Register Full */ +#define SH7750_SCSSR1_ORER 0x20 /* Overrun Error */ +#define SH7750_SCSSR1_FER 0x10 /* Framing Error */ +#define SH7750_SCSSR1_PER 0x08 /* Parity Error */ +#define SH7750_SCSSR1_TEND 0x04 /* Transmit End */ +#define SH7750_SCSSR1_MPB 0x02 /* Multiprocessor Bit */ +#define SH7750_SCSSR1_MPBT 0x01 /* Multiprocessor Bit Transfer */ + +#define SH7750_SCSSR2_PERN 0xF000 /* Number of Parity Errors */ +#define SH7750_SCSSR2_PERN_S 12 +#define SH7750_SCSSR2_FERN 0x0F00 /* Number of Framing Errors */ +#define SH7750_SCSSR2_FERN_S 8 +#define SH7750_SCSSR2_ER 0x0080 /* Receive Error */ +#define SH7750_SCSSR2_TEND 0x0040 /* Transmit End */ +#define SH7750_SCSSR2_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SH7750_SCSSR2_BRK 0x0010 /* Break Detect */ +#define SH7750_SCSSR2_FER 0x0008 /* Framing Error */ +#define SH7750_SCSSR2_PER 0x0004 /* Parity Error */ +#define SH7750_SCSSR2_RDF 0x0002 /* Receive FIFO Data Full */ +#define SH7750_SCSSR2_DR 0x0001 /* Receive Data Ready */ + +/* SCI Serial Port Register - SCSPTR1(byte) */ +#define SH7750_SCSPTR1_REGOFS 0xE0001C /* offset */ +#define SH7750_SCSPTR1 SH7750_P4_REG32(SH7750_SCSPTR1_REGOFS) +#define SH7750_SCSPTR1_A7 SH7750_A7_REG32(SH7750_SCSPTR1_REGOFS) + +#define SH7750_SCSPTR1_EIO 0x80 /* Error Interrupt Only */ +#define SH7750_SCSPTR1_SPB1IO 0x08 /* 1: Output SPB1DT bit to SCK pin */ +#define SH7750_SCSPTR1_SPB1DT 0x04 /* Serial Port Clock Port Data */ +#define SH7750_SCSPTR1_SPB0IO 0x02 /* 1: Output SPB0DT bit to TxD pin */ +#define SH7750_SCSPTR1_SPB0DT 0x01 /* Serial Port Break Data */ + +/* SCIF Serial Port Register - SCSPTR2(half) */ +#define SH7750_SCSPTR2_REGOFS 0xE80020 /* offset */ +#define SH7750_SCSPTR2 SH7750_P4_REG32(SH7750_SCSPTR2_REGOFS) +#define SH7750_SCSPTR2_A7 SH7750_A7_REG32(SH7750_SCSPTR2_REGOFS) + +#define SH7750_SCSPTR2_RTSIO 0x80 /* 1: Output RTSDT bit to RTS2\ pin */ +#define SH7750_SCSPTR2_RTSDT 0x40 /* RTS Port Data */ +#define SH7750_SCSPTR2_CTSIO 0x20 /* 1: Output CTSDT bit to CTS2\ pin */ +#define SH7750_SCSPTR2_CTSDT 0x10 /* CTS Port Data */ +#define SH7750_SCSPTR2_SPB2IO 0x02 /* 1: Output SPBDT bit to TxD2 pin */ +#define SH7750_SCSPTR2_SPB2DT 0x01 /* Serial Port Break Data */ + +/* SCI Bit Rate Register - SCBRR1(byte), SCBRR2(byte) */ +#define SH7750_SCBRR_REGOFS(n) ((n) == 1 ? 0xE00004 : 0xE80004) /* offset */ +#define SH7750_SCBRR(n) SH7750_P4_REG32(SH7750_SCBRR_REGOFS(n)) +#define SH7750_SCBRR1 SH7750_SCBRR(1) +#define SH7750_SCBRR2 SH7750_SCBRR(2) +#define SH7750_SCBRR_A7(n) SH7750_A7_REG32(SH7750_SCBRR_REGOFS(n)) +#define SH7750_SCBRR1_A7 SH7750_SCBRR(1) +#define SH7750_SCBRR2_A7 SH7750_SCBRR(2) + +/* SCIF FIFO Control Register - SCFCR2(half) */ +#define SH7750_SCFCR2_REGOFS 0xE80018 /* offset */ +#define SH7750_SCFCR2 SH7750_P4_REG32(SH7750_SCFCR2_REGOFS) +#define SH7750_SCFCR2_A7 SH7750_A7_REG32(SH7750_SCFCR2_REGOFS) + +#define SH7750_SCFCR2_RSTRG 0x700 /* RTS2\ Output Active Trigger; RTS2\ + signal goes to high level when the + number of received data stored in + FIFO exceeds the trigger number */ +#define SH7750_SCFCR2_RSTRG_15 0x000 /* 15 bytes */ +#define SH7750_SCFCR2_RSTRG_1 0x000 /* 1 byte */ +#define SH7750_SCFCR2_RSTRG_4 0x000 /* 4 bytes */ +#define SH7750_SCFCR2_RSTRG_6 0x000 /* 6 bytes */ +#define SH7750_SCFCR2_RSTRG_8 0x000 /* 8 bytes */ +#define SH7750_SCFCR2_RSTRG_10 0x000 /* 10 bytes */ +#define SH7750_SCFCR2_RSTRG_14 0x000 /* 14 bytes */ + +#define SH7750_SCFCR2_RTRG 0x0C0 /* Receive FIFO Data Number Trigger, + Receive Data Full (RDF) Flag sets + when number of receive data bytes is + equal or greater than the trigger + number */ +#define SH7750_SCFCR2_RTRG_1 0x000 /* 1 byte */ +#define SH7750_SCFCR2_RTRG_4 0x040 /* 4 bytes */ +#define SH7750_SCFCR2_RTRG_8 0x080 /* 8 bytes */ +#define SH7750_SCFCR2_RTRG_14 0x0C0 /* 14 bytes */ + +#define SH7750_SCFCR2_TTRG 0x030 /* Transmit FIFO Data Number Trigger, + Transmit FIFO Data Register Empty (TDFE) + flag sets when the number of remaining + transmit data bytes is equal or less + than the trigger number */ +#define SH7750_SCFCR2_TTRG_8 0x000 /* 8 bytes */ +#define SH7750_SCFCR2_TTRG_4 0x010 /* 4 bytes */ +#define SH7750_SCFCR2_TTRG_2 0x020 /* 2 bytes */ +#define SH7750_SCFCR2_TTRG_1 0x030 /* 1 byte */ + +#define SH7750_SCFCR2_MCE 0x008 /* Modem Control Enable */ +#define SH7750_SCFCR2_TFRST 0x004 /* Transmit FIFO Data Register Reset, + invalidates the transmit data in the + transmit FIFO */ +#define SH7750_SCFCR2_RFRST 0x002 /* Receive FIFO Data Register Reset, + invalidates the receive data in the + receive FIFO data register and resets + it to the empty state */ +#define SH7750_SCFCR2_LOOP 0x001 /* Loopback Test */ + +/* SCIF FIFO Data Count Register - SCFDR2(half, read-only) */ +#define SH7750_SCFDR2_REGOFS 0xE8001C /* offset */ +#define SH7750_SCFDR2 SH7750_P4_REG32(SH7750_SCFDR2_REGOFS) +#define SH7750_SCFDR2_A7 SH7750_A7_REG32(SH7750_SCFDR2_REGOFS) + +#define SH7750_SCFDR2_T 0x1F00 /* Number of untransmitted data bytes + in transmit FIFO */ +#define SH7750_SCFDR2_T_S 8 +#define SH7750_SCFDR2_R 0x001F /* Number of received data bytes in + receive FIFO */ +#define SH7750_SCFDR2_R_S 0 + +/* SCIF Line Status Register - SCLSR2(half, read-only) */ +#define SH7750_SCLSR2_REGOFS 0xE80024 /* offset */ +#define SH7750_SCLSR2 SH7750_P4_REG32(SH7750_SCLSR2_REGOFS) +#define SH7750_SCLSR2_A7 SH7750_A7_REG32(SH7750_SCLSR2_REGOFS) + +#define SH7750_SCLSR2_ORER 0x0001 /* Overrun Error */ + +/* + * SCI-based Smart Card Interface + */ +/* Smart Card Mode Register - SCSCMR1(byte) */ +#define SH7750_SCSCMR1_REGOFS 0xE00018 /* offset */ +#define SH7750_SCSCMR1 SH7750_P4_REG32(SH7750_SCSCMR1_REGOFS) +#define SH7750_SCSCMR1_A7 SH7750_A7_REG32(SH7750_SCSCMR1_REGOFS) + +#define SH7750_SCSCMR1_SDIR 0x08 /* Smart Card Data Transfer Direction: */ +#define SH7750_SCSCMR1_SDIR_LSBF 0x00 /* LSB-first */ +#define SH7750_SCSCMR1_SDIR_MSBF 0x08 /* MSB-first */ + +#define SH7750_SCSCMR1_SINV 0x04 /* Smart Card Data Inversion */ +#define SH7750_SCSCMR1_SMIF 0x01 /* Smart Card Interface Mode Select */ + +/* Smart-card specific bits in other registers */ +/* SCSMR1: */ +#define SH7750_SCSMR1_GSM 0x80 /* GSM mode select */ + +/* SCSSR1: */ +#define SH7750_SCSSR1_ERS 0x10 /* Error Signal Status */ + +/* + * I/O Ports + */ +/* Port Control Register A - PCTRA */ +#define SH7750_PCTRA_REGOFS 0x80002C /* offset */ +#define SH7750_PCTRA SH7750_P4_REG32(SH7750_PCTRA_REGOFS) +#define SH7750_PCTRA_A7 SH7750_A7_REG32(SH7750_PCTRA_REGOFS) + +#define SH7750_PCTRA_PBPUP(n) 0 /* Bit n is pulled up */ +#define SH7750_PCTRA_PBNPUP(n) (1 << ((n)*2+1)) /* Bit n is not pulled up */ +#define SH7750_PCTRA_PBINP(n) 0 /* Bit n is an input */ +#define SH7750_PCTRA_PBOUT(n) (1 << ((n)*2)) /* Bit n is an output */ + +/* Port Data Register A - PDTRA(half) */ +#define SH7750_PDTRA_REGOFS 0x800030 /* offset */ +#define SH7750_PDTRA SH7750_P4_REG32(SH7750_PDTRA_REGOFS) +#define SH7750_PDTRA_A7 SH7750_A7_REG32(SH7750_PDTRA_REGOFS) + +#define SH7750_PDTRA_BIT(n) (1 << (n)) + +/* Port Control Register B - PCTRB */ +#define SH7750_PCTRB_REGOFS 0x800040 /* offset */ +#define SH7750_PCTRB SH7750_P4_REG32(SH7750_PCTRB_REGOFS) +#define SH7750_PCTRB_A7 SH7750_A7_REG32(SH7750_PCTRB_REGOFS) + +#define SH7750_PCTRB_PBPUP(n) 0 /* Bit n is pulled up */ +#define SH7750_PCTRB_PBNPUP(n) (1 << ((n-16)*2+1)) /* Bit n is not pulled up */ +#define SH7750_PCTRB_PBINP(n) 0 /* Bit n is an input */ +#define SH7750_PCTRB_PBOUT(n) (1 << ((n-16)*2)) /* Bit n is an output */ + +/* Port Data Register B - PDTRB(half) */ +#define SH7750_PDTRB_REGOFS 0x800044 /* offset */ +#define SH7750_PDTRB SH7750_P4_REG32(SH7750_PDTRB_REGOFS) +#define SH7750_PDTRB_A7 SH7750_A7_REG32(SH7750_PDTRB_REGOFS) + +#define SH7750_PDTRB_BIT(n) (1 << ((n)-16)) + +/* GPIO Interrupt Control Register - GPIOIC(half) */ +#define SH7750_GPIOIC_REGOFS 0x800048 /* offset */ +#define SH7750_GPIOIC SH7750_P4_REG32(SH7750_GPIOIC_REGOFS) +#define SH7750_GPIOIC_A7 SH7750_A7_REG32(SH7750_GPIOIC_REGOFS) + +#define SH7750_GPIOIC_PTIREN(n) (1 << (n)) /* Port n is used as a GPIO int */ + +/* + * Interrupt Controller - INTC + */ +/* Interrupt Control Register - ICR (half) */ +#define SH7750_ICR_REGOFS 0xD00000 /* offset */ +#define SH7750_ICR SH7750_P4_REG32(SH7750_ICR_REGOFS) +#define SH7750_ICR_A7 SH7750_A7_REG32(SH7750_ICR_REGOFS) + +#define SH7750_ICR_NMIL 0x8000 /* NMI Input Level */ +#define SH7750_ICR_MAI 0x4000 /* NMI Interrupt Mask */ + +#define SH7750_ICR_NMIB 0x0200 /* NMI Block Mode: */ +#define SH7750_ICR_NMIB_BLK 0x0000 /* NMI requests held pending while + SR.BL bit is set to 1 */ +#define SH7750_ICR_NMIB_NBLK 0x0200 /* NMI requests detected when SR.BL bit + set to 1 */ + +#define SH7750_ICR_NMIE 0x0100 /* NMI Edge Select: */ +#define SH7750_ICR_NMIE_FALL 0x0000 /* Interrupt request detected on falling + edge of NMI input */ +#define SH7750_ICR_NMIE_RISE 0x0100 /* Interrupt request detected on rising + edge of NMI input */ + +#define SH7750_ICR_IRLM 0x0080 /* IRL Pin Mode: */ +#define SH7750_ICR_IRLM_ENC 0x0000 /* IRL\ pins used as a level-encoded + interrupt requests */ +#define SH7750_ICR_IRLM_RAW 0x0080 /* IRL\ pins used as a four independent + interrupt requests */ + +/* Interrupt Priority Register A - IPRA (half) */ +#define SH7750_IPRA_REGOFS 0xD00004 /* offset */ +#define SH7750_IPRA SH7750_P4_REG32(SH7750_IPRA_REGOFS) +#define SH7750_IPRA_A7 SH7750_A7_REG32(SH7750_IPRA_REGOFS) + +#define SH7750_IPRA_TMU0 0xF000 /* TMU0 interrupt priority */ +#define SH7750_IPRA_TMU0_S 12 +#define SH7750_IPRA_TMU1 0x0F00 /* TMU1 interrupt priority */ +#define SH7750_IPRA_TMU1_S 8 +#define SH7750_IPRA_TMU2 0x00F0 /* TMU2 interrupt priority */ +#define SH7750_IPRA_TMU2_S 4 +#define SH7750_IPRA_RTC 0x000F /* RTC interrupt priority */ +#define SH7750_IPRA_RTC_S 0 + +/* Interrupt Priority Register B - IPRB (half) */ +#define SH7750_IPRB_REGOFS 0xD00008 /* offset */ +#define SH7750_IPRB SH7750_P4_REG32(SH7750_IPRB_REGOFS) +#define SH7750_IPRB_A7 SH7750_A7_REG32(SH7750_IPRB_REGOFS) + +#define SH7750_IPRB_WDT 0xF000 /* WDT interrupt priority */ +#define SH7750_IPRB_WDT_S 12 +#define SH7750_IPRB_REF 0x0F00 /* Memory Refresh unit interrupt + priority */ +#define SH7750_IPRB_REF_S 8 +#define SH7750_IPRB_SCI1 0x00F0 /* SCI1 interrupt priority */ +#define SH7750_IPRB_SCI1_S 4 + +/* Interrupt Priority Register ó - IPRó (half) */ +#define SH7750_IPRC_REGOFS 0xD00004 /* offset */ +#define SH7750_IPRC SH7750_P4_REG32(SH7750_IPRC_REGOFS) +#define SH7750_IPRC_A7 SH7750_A7_REG32(SH7750_IPRC_REGOFS) + +#define SH7750_IPRC_GPIO 0xF000 /* GPIO interrupt priority */ +#define SH7750_IPRC_GPIO_S 12 +#define SH7750_IPRC_DMAC 0x0F00 /* DMAC interrupt priority */ +#define SH7750_IPRC_DMAC_S 8 +#define SH7750_IPRC_SCIF 0x00F0 /* SCIF interrupt priority */ +#define SH7750_IPRC_SCIF_S 4 +#define SH7750_IPRC_HUDI 0x000F /* H-UDI interrupt priority */ +#define SH7750_IPRC_HUDI_S 0 + + +/* + * User Break Controller registers + */ +#define SH7750_BARA 0x200000 /* Break address regiser A */ +#define SH7750_BAMRA 0x200004 /* Break address mask regiser A */ +#define SH7750_BBRA 0x200008 /* Break bus cycle regiser A */ +#define SH7750_BARB 0x20000c /* Break address regiser B */ +#define SH7750_BAMRB 0x200010 /* Break address mask regiser B */ +#define SH7750_BBRB 0x200014 /* Break bus cycle regiser B */ +#define SH7750_BASRB 0x000018 /* Break ASID regiser B */ +#define SH7750_BDRB 0x200018 /* Break data regiser B */ +#define SH7750_BDMRB 0x20001c /* Break data mask regiser B */ +#define SH7750_BRCR 0x200020 /* Break control register */ + +#define SH7750_BRCR_UDBE 0x0001 /* User break debug enable bit */ + +#endif diff --git a/c/src/lib/libcpu/sh/sh7750/sci/.cvsignore b/c/src/lib/libcpu/sh/sh7750/sci/.cvsignore new file mode 100644 index 0000000000..282522db03 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/sci/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/c/src/lib/libcpu/sh/sh7750/sci/Makefile.am b/c/src/lib/libcpu/sh/sh7750/sci/Makefile.am new file mode 100644 index 0000000000..e37a7e7984 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/sci/Makefile.am @@ -0,0 +1,29 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/sci.rel + +C_FILES = console.c sh4uart.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(top_srcdir)/../../../../../../make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/compile.am +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/sci/console.c b/c/src/lib/libcpu/sh/sh7750/sci/console.c new file mode 100644 index 0000000000..46d5f2eefc --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/sci/console.c @@ -0,0 +1,484 @@ +/* + * Console driver for SH-4 UART modules + * + * Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia + * Author: Alexandra Kossovsky + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include +#include +#include "sh/sh4uart.h" + +/* Descriptor structures for two on-chip UART channels */ +sh4uart sh4_uarts[2]; + +/* Console operations mode: + * 0 - raw (non-termios) polled input/output + * 1 - termios-based polled input/output + * 2 - termios-based interrupt-driven input/output + * 3 - non-termios over gdb stub + */ +int console_mode = 3; +#define CONSOLE_MODE_RAW (0) +#define CONSOLE_MODE_POLL (1) +#define CONSOLE_MODE_INT (2) +#define CONSOLE_MODE_IPL (3) + +/* Wrapper functions for SH-4 UART generic driver */ + +/* console_poll_read -- + * wrapper for poll read function + * + * PARAMETERS: + * minor - minor device number + * + * RETURNS: + * character code readed from UART, or -1 if there is no characters + * available + */ +static int +console_poll_read(int minor) +{ + return sh4uart_poll_read(&sh4_uarts[minor]); +} + +/* console_interrupt_write -- + * wrapper for interrupt write function + * + * PARAMETERS: + * minor - minor device number + * buf - output buffer + * len - output buffer length + * + * RETURNS: + * result code + */ +static int +console_interrupt_write(int minor, const char *buf, int len) +{ + return sh4uart_interrupt_write(&sh4_uarts[minor], buf, len); +} + +/* console_poll_write -- + * wrapper for polling mode write function + * + * PARAMETERS: + * minor - minor device number + * buf - output buffer + * len - output buffer length + * + * RETURNS: + * result code + */ +static int +console_poll_write(int minor, const char *buf, int len) +{ + return sh4uart_poll_write(&sh4_uarts[minor], buf, len); +} + +/* console_set_attributes -- + * wrapper for hardware-dependent termios attributes setting + * + * PARAMETERS: + * minor - minor device number + * t - pointer to the termios structure + * + * RETURNS: + * result code + */ +static int +console_set_attributes(int minor, const struct termios *t) +{ + return sh4uart_set_attributes(&sh4_uarts[minor], t); +} + +/* console_stop_remote_tx -- + * wrapper for stopping data flow from remote party. + * + * PARAMETERS: + * minor - minor device number + * + * RETURNS: + * result code + */ +static int +console_stop_remote_tx(int minor) +{ + if (minor < sizeof(sh4_uarts)/sizeof(sh4_uarts[0])) + return sh4uart_stop_remote_tx(&sh4_uarts[minor]); + else + return RTEMS_INVALID_NUMBER; +} + +/* console_start_remote_tx -- + * wrapper for resuming data flow from remote party. + * + * PARAMETERS: + * minor - minor device number + * + */ +static int +console_start_remote_tx(int minor) +{ + if (minor < sizeof(sh4_uarts)/sizeof(sh4_uarts[0])) + return sh4uart_start_remote_tx(&sh4_uarts[minor]); + else + return RTEMS_INVALID_NUMBER; +} + +/* console_first_open -- + * wrapper for UART controller initialization functions + * + * PARAMETERS: + * major - major device number + * minor - minor device number + * arg - libio device open argument + * + * RETURNS: + * error code + */ +static int +console_first_open(int major, int minor, void *arg) +{ + rtems_libio_open_close_args_t *args = arg; + rtems_status_code sc; + + sc = sh4uart_init(&sh4_uarts[minor], /* uart */ + args->iop->data1, /* tty */ + minor+1, /* channel */ + (console_mode == CONSOLE_MODE_INT)); + + if (sc == RTEMS_SUCCESSFUL) + sc = sh4uart_reset(&sh4_uarts[minor]); + + return sc; +} + +/* console_last_close -- + * wrapper for UART controller close function + * + * PARAMETERS: + * major - major device number + * minor - minor device number + * arg - libio device close argument + * + * RETURNS: + * error code + */ +static int +console_last_close(int major, int minor, void *arg) +{ + return sh4uart_disable(&sh4_uarts[minor]); +} + +/* console_reserve_resources -- + * reserve termios resources for 2 UART channels + * + * PARAMETERS: + * configuration -- pointer to the RTEMS configuration table + * + * RETURNS: + * none + */ +void +console_reserve_resources(rtems_configuration_table *configuration) +{ + if ((console_mode != CONSOLE_MODE_RAW) && + (console_mode != CONSOLE_MODE_IPL)) + rtems_termios_reserve_resources (configuration, 2); +} + +/* console_initialize -- + * This routine initializes the console IO drivers and register devices + * in RTEMS I/O system. + * + * PARAMETERS: + * major - major console device number + * minor - minor console device number (not used) + * arg - device initialize argument + * + * RETURNS: + * RTEMS error code (RTEMS_SUCCESSFUL if device initialized successfuly) + */ +rtems_device_driver +console_initialize(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + rtems_status_code status; + +#ifdef SH4_WITH_IPL + /* booting from flash we cannot have IPL console */ + if (boot_mode != SH4_BOOT_MODE_IPL && console_mode == CONSOLE_MODE_IPL) + console_mode = CONSOLE_MODE_INT; + + /* break out from gdb if neccessary */ + if (boot_mode == SH4_BOOT_MODE_IPL && console_mode != CONSOLE_MODE_IPL) + ipl_finish(); +#endif + + /* + * Set up TERMIOS + */ + if ((console_mode != CONSOLE_MODE_RAW) && + (console_mode != CONSOLE_MODE_IPL)) + rtems_termios_initialize (); + + /* + * Register the devices + */ + status = rtems_io_register_name ("/dev/console", major, 0); + if (status != RTEMS_SUCCESSFUL) + rtems_fatal_error_occurred (status); + + status = rtems_io_register_name ("/dev/aux", major, 1); + if (status != RTEMS_SUCCESSFUL) + rtems_fatal_error_occurred (status); + + if (console_mode == CONSOLE_MODE_RAW) + { + rtems_status_code sc; + sc = sh4uart_init(&sh4_uarts[0], /* uart */ + NULL, /* tty */ + 1, /* UART channel number */ + 0); /* Poll-mode */ + + if (sc == RTEMS_SUCCESSFUL) + sc = sh4uart_reset(&sh4_uarts[0]); + + sc = sh4uart_init(&sh4_uarts[1], /* uart */ + NULL, /* tty */ + 2, /* UART channel number */ + 0); /* Poll-mode */ + + if (sc == RTEMS_SUCCESSFUL) + sc = sh4uart_reset(&sh4_uarts[1]); + + return sc; + } + + return RTEMS_SUCCESSFUL; +} + +/* console_open -- + * Open console device driver. Pass appropriate termios callback + * functions to termios library. + * + * PARAMETERS: + * major - major device number for console devices + * minor - minor device number for console + * arg - device opening argument + * + * RETURNS: + * RTEMS error code + */ +rtems_device_driver +console_open(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + static const rtems_termios_callbacks intr_callbacks = { + console_first_open, /* firstOpen */ + console_last_close, /* lastClose */ + NULL, /* pollRead */ + console_interrupt_write, /* write */ + console_set_attributes, /* setAttributes */ + console_stop_remote_tx, /* stopRemoteTx */ + console_start_remote_tx, /* startRemoteTx */ + 1 /* outputUsesInterrupts */ + }; + static const rtems_termios_callbacks poll_callbacks = { + console_first_open, /* firstOpen */ + console_last_close, /* lastClose */ + console_poll_read, /* pollRead */ + console_poll_write, /* write */ + console_set_attributes, /* setAttributes */ + console_stop_remote_tx, /* stopRemoteTx */ + console_start_remote_tx, /* startRemoteTx */ + 0 /* outputUsesInterrupts */ + }; + + switch (console_mode) + { + case CONSOLE_MODE_RAW: + case CONSOLE_MODE_IPL: + return RTEMS_SUCCESSFUL; + + case CONSOLE_MODE_INT: + return rtems_termios_open(major, minor, arg, &intr_callbacks); + + case CONSOLE_MODE_POLL: + return rtems_termios_open(major, minor, arg, &poll_callbacks); + + default: + rtems_fatal_error_occurred(0xC07A1310); + } + + return RTEMS_INTERNAL_ERROR; +} + +/* console_close -- + * Close console device. + * + * PARAMETERS: + * major - major device number for console devices + * minor - minor device number for console + * arg - device close argument + * + * RETURNS: + * RTEMS error code + */ +rtems_device_driver +console_close(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + if ((console_mode != CONSOLE_MODE_RAW) && + (console_mode != CONSOLE_MODE_IPL)) + return rtems_termios_close (arg); + else + return RTEMS_SUCCESSFUL; +} + +/* console_read -- + * Read from the console device + * + * PARAMETERS: + * major - major device number for console devices + * minor - minor device number for console + * arg - device read argument + * + * RETURNS: + * RTEMS error code + */ +rtems_device_driver +console_read(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + if ((console_mode != CONSOLE_MODE_RAW) && + (console_mode != CONSOLE_MODE_IPL)) + { + return rtems_termios_read (arg); + } + else + { + rtems_libio_rw_args_t *argp = arg; + char *buf = argp->buffer; + int count = argp->count; + int n = 0; + int c; + while (n < count) + { + do { + c = (console_mode == CONSOLE_MODE_RAW) ? + sh4uart_poll_read(&sh4_uarts[minor]) : + ipl_console_poll_read(minor); + } while (c == -1); + if (c == '\r') + c = '\n'; + *(buf++) = c; + n++; + if (c == '\n') + break; + } + argp->bytes_moved = n; + return RTEMS_SUCCESSFUL; + } +} + +/* console_write -- + * Write to the console device + * + * PARAMETERS: + * major - major device number for console devices + * minor - minor device number for console + * arg - device write argument + * + * RETURNS: + * RTEMS error code + */ +rtems_device_driver +console_write(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + switch (console_mode) + { + case CONSOLE_MODE_POLL: + case CONSOLE_MODE_INT: + return rtems_termios_write (arg); + case CONSOLE_MODE_RAW: + { + rtems_libio_rw_args_t *argp = arg; + char cr = '\r'; + char *buf = argp->buffer; + int count = argp->count; + int i; + + for (i = 0; i < count; i++) + { + if (*buf == '\n') + sh4uart_poll_write(&sh4_uarts[minor], &cr, 1); + sh4uart_poll_write(&sh4_uarts[minor], buf, 1); + buf++; + } + argp->bytes_moved = count; + return RTEMS_SUCCESSFUL; + } +#ifdef SH4_WITH_IPL + case CONSOLE_MODE_IPL: + { + rtems_libio_rw_args_t *argp = arg; + char *buf = argp->buffer; + int count = argp->count; + ipl_console_poll_write(minor, buf, count); + argp->bytes_moved = count; + return RTEMS_SUCCESSFUL; + } +#endif + default: /* Unreachable */ + return RTEMS_NOT_DEFINED; + } +} + +/* console_control -- + * Handle console device I/O control (IOCTL) + * + * PARAMETERS: + * major - major device number for console devices + * minor - minor device number for console + * arg - device ioctl argument + * + * RETURNS: + * RTEMS error code + */ +rtems_device_driver +console_control(rtems_device_major_number major, + rtems_device_minor_number minor, + void *arg) +{ + if ((console_mode != CONSOLE_MODE_RAW) && + (console_mode != CONSOLE_MODE_IPL)) + { + return rtems_termios_ioctl (arg); + } + else + { + return RTEMS_SUCCESSFUL; + } +} + + + diff --git a/c/src/lib/libcpu/sh/sh7750/sci/sh4uart.c b/c/src/lib/libcpu/sh/sh7750/sci/sh4uart.c new file mode 100644 index 0000000000..7d6c83525b --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/sci/sh4uart.c @@ -0,0 +1,945 @@ +/* + * Generic UART Serial driver for SH-4 processors + * + * This driver uses variable SH4_CPU_HZ_Frequency, + * which should be defined in bsp to HZ macro. + * + * Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russian Fed. + * Author: Alexandra Kossovsky + * + * COPYRIGHT (c) 1989-2000. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + * + */ + +#include +#include +#include +#include "sh/sh4uart.h" + +#ifndef SH4_UART_INTERRUPT_LEVEL +#define SH4_UART_INTERRUPT_LEVEL 4 +#endif + +/* Forward function declarations */ +static rtems_isr +sh4uart1_interrupt_transmit(rtems_vector_number vec); +static rtems_isr +sh4uart1_interrupt_receive(rtems_vector_number vec); +static rtems_isr +sh4uart2_interrupt_transmit(rtems_vector_number vec); +static rtems_isr +sh4uart2_interrupt_receive(rtems_vector_number vec); + +/* + * sh4uart_init -- + * This function verifies the input parameters and perform initialization + * of the SH-4 on-chip UART descriptor structure. + * + * PARAMETERS: + * uart - pointer to the UART channel descriptor structure + * tty - pointer to termios structure + * chn - channel number (SH4_SCI/SH4_SCIF -- 1/2) + * int_driven - interrupt-driven (1) or polled (0) I/O mode + * + * RETURNS: + * RTEMS_SUCCESSFUL if all parameters are valid, or error code + */ +rtems_status_code +sh4uart_init(sh4uart *uart, void *tty, int chn, int int_driven) +{ + if (uart == NULL) + return RTEMS_INVALID_ADDRESS; + + if ((chn != SH4_SCI) && (chn != SH4_SCIF)) + return RTEMS_INVALID_NUMBER; + + uart->chn = chn; + uart->tty = tty; + uart->int_driven = int_driven; + +#if 0 + sh4uart_poll_write(uart, "init", 4); +#endif + return RTEMS_SUCCESSFUL; +} + +/* + * sh4uart_get_Pph -- + * Get current peripheral module clock. + * + * PARAMETERS: none; + * Cpu clock is get from SH4_CPU_HZ_Frequency. + * This variable should be defined in bsp. + * + * RETURNS: + * peripheral module clock in Hz. + */ +rtems_unsigned32 +sh4uart_get_Pph(void) +{ + rtems_unsigned16 frqcr = *(volatile rtems_unsigned16 *)SH7750_FRQCR; + rtems_unsigned32 Pph = SH4_CPU_HZ_Frequency; + + switch (frqcr & SH7750_FRQCR_IFC) + { + case SH7750_FRQCR_IFCDIV1: + break; + + case SH7750_FRQCR_IFCDIV2: + Pph *= 2; + break; + + case SH7750_FRQCR_IFCDIV3: + Pph *= 3; + break; + + case SH7750_FRQCR_IFCDIV4: + Pph *= 4; + break; + + case SH7750_FRQCR_IFCDIV6: + Pph *= 6; + break; + + case SH7750_FRQCR_IFCDIV8: + Pph *= 8; + break; + + default: /* unreachable */ + break; + } + + switch (frqcr & SH7750_FRQCR_PFC) + { + case SH7750_FRQCR_PFCDIV2: + Pph /= 2; + break; + + case SH7750_FRQCR_PFCDIV3: + Pph /= 3; + break; + + case SH7750_FRQCR_PFCDIV4: + Pph /= 4; + break; + + case SH7750_FRQCR_PFCDIV6: + Pph /= 6; + break; + + case SH7750_FRQCR_PFCDIV8: + Pph /= 8; + break; + + default: /* unreachable */ + break; + } + + return Pph; +} + +/* + * sh4uart_set_baudrate -- + * Program the UART timer to specified baudrate + * + * PARAMETERS: + * uart - pointer to UART descriptor structure + * baud - termios baud rate (B50, B9600, etc...) + * + * ALGORITHM: + * see SH7750 Hardware Manual. + * + * RETURNS: + * none + */ +static void +sh4uart_set_baudrate(sh4uart *uart, speed_t baud) +{ + rtems_unsigned32 rate; + rtems_signed16 div; + int n; + rtems_unsigned32 Pph = sh4uart_get_Pph(); + + switch (baud) + { + case B50: rate = 50; break; + case B75: rate = 75; break; + case B110: rate = 110; break; + case B134: rate = 134; break; + case B150: rate = 150; break; + case B200: rate = 200; break; + case B300: rate = 300; break; + case B600: rate = 600; break; + case B1200: rate = 1200; break; + case B2400: rate = 2400; break; + case B4800: rate = 4800; break; + case B9600: rate = 9600; break; + case B19200: rate = 19200; break; + case B38400: rate = 38400; break; + case B57600: rate = 57600; break; +#ifdef B115200 + case B115200: rate = 115200; break; +#endif +#ifdef B230400 + case B230400: rate = 230400; break; +#endif + default: rate = 9600; break; + } + + for (n = 0; n < 4; n++) + { + div = Pph / (32 * (1 << (2 * n)) * rate) - 1; + if (div < 0x100) + break; + } + + /* Set default baudrate if specified baudrate is impossible */ + if (n >= 4) + sh4uart_set_baudrate(uart, B9600); + + SCSMR(uart->chn) &= ~SH7750_SCSMR_CKS; + SCSMR(uart->chn) |= n << SH7750_SCSMR_CKS_S; + SCBRR(uart->chn) = div; + /* Whait at least 1 bit interwal */ + rtems_task_wake_after(RTEMS_MILLISECONDS_TO_TICKS(1000 / rate)); +} + +/* + * sh4uart_reset -- + * This function perform the hardware initialization of SH-4 + * on-chip UART controller using parameters + * filled by the sh4uart_init function. + * + * PARAMETERS: + * uart - pointer to UART channel descriptor structure + * + * RETURNS: + * RTEMS_SUCCESSFUL if channel is initialized successfully, error + * code in other case + */ +rtems_status_code +sh4uart_reset(sh4uart *uart) +{ + register int chn; + register int int_driven; + rtems_status_code rc; + + if (uart == NULL) + return RTEMS_INVALID_ADDRESS; + + chn = uart->chn; + int_driven = uart->int_driven; + + SCSCR(chn) = 0x0; /* Is set properly at the end of this function */ + SCSMR(chn) = 0x0; /* 8-bit, non-parity, 1 stop bit, pf/1 clock */ + + if (chn == SH4_SCIF) + SCFCR2 = SH7750_SCFCR2_TFRST | SH7750_SCFCR2_RFRST | + SH7750_SCFCR2_RTRG_1 | SH7750_SCFCR2_TTRG_4; + + if (chn == SH4_SCI) + SCSPTR1 = int_driven ? 0x0 : SH7750_SCSPTR1_EIO; + else + SCSPTR2 = SH7750_SCSPTR2_RTSDT; + + if (int_driven) + { + rtems_unsigned16 ipr; + + if (chn == SH4_SCI) + { + ipr = IPRB; + ipr &= ~SH7750_IPRB_SCI1; + ipr |= SH4_UART_INTERRUPT_LEVEL << SH7750_IPRB_SCI1_S; + IPRB = ipr; + + rc = rtems_interrupt_catch(sh4uart1_interrupt_transmit, + SH7750_EVT_TO_NUM(SH7750_EVT_SCI_TXI), + &uart->old_handler_transmit); + if (rc != RTEMS_SUCCESSFUL) + return rc; + rc = rtems_interrupt_catch(sh4uart1_interrupt_receive, + SH7750_EVT_TO_NUM(SH7750_EVT_SCI_RXI), + &uart->old_handler_receive); + if (rc != RTEMS_SUCCESSFUL) + return rc; + } + else + { + ipr = IPRC; + ipr &= ~SH7750_IPRC_SCIF; + ipr |= SH4_UART_INTERRUPT_LEVEL << SH7750_IPRC_SCIF_S; + IPRC = ipr; + + rc = rtems_interrupt_catch(sh4uart2_interrupt_transmit, + SH7750_EVT_TO_NUM(SH7750_EVT_SCIF_TXI), + &uart->old_handler_transmit); + if (rc != RTEMS_SUCCESSFUL) + return rc; + rc = rtems_interrupt_catch(sh4uart2_interrupt_receive, + SH7750_EVT_TO_NUM(SH7750_EVT_SCIF_RXI), + &uart->old_handler_receive); + if (rc != RTEMS_SUCCESSFUL) + return rc; + } + uart->tx_buf = NULL; + uart->tx_ptr = uart->tx_buf_len = 0; + } + + sh4uart_set_baudrate(uart, B38400); /* debug defaults (unfortunately, + it is differ to termios default */ + + SCSCR(chn) = SH7750_SCSCR_TE | SH7750_SCSCR_RE | + (chn == SH4_SCI ? 0x0 : SH7750_SCSCR2_REIE) | + (int_driven ? (SH7750_SCSCR_RIE | SH7750_SCSCR_TIE) : 0x0); + + return RTEMS_SUCCESSFUL; +} + +/* + * sh4uart_disable -- + * This function disable the operations on SH-4 UART controller + * + * PARAMETERS: + * uart - pointer to UART channel descriptor structure + * + * RETURNS: + * RTEMS_SUCCESSFUL if UART closed successfuly, or error code in + * other case + */ +rtems_status_code +sh4uart_disable(sh4uart *uart) +{ + rtems_status_code rc; + + SCSCR(uart->chn) &= ~(SH7750_SCSCR_TE | SH7750_SCSCR_RE); + + if (uart->int_driven) + { + rc = rtems_interrupt_catch(uart->old_handler_transmit, + uart->chn == SH4_SCI ? + SH7750_EVT_SCI_TXI : SH7750_EVT_SCIF_TXI, + NULL); + if (rc != RTEMS_SUCCESSFUL) + return rc; + rc = rtems_interrupt_catch(uart->old_handler_receive, + uart->chn == SH4_SCI ? + SH7750_EVT_SCI_RXI : SH7750_EVT_SCIF_RXI, + NULL); + if (rc != RTEMS_SUCCESSFUL) + return rc; + } + + return RTEMS_SUCCESSFUL; +} + +/* + * sh4uart_set_attributes -- + * This function parse the termios attributes structure and perform + * the appropriate settings in hardware. + * + * PARAMETERS: + * uart - pointer to the UART descriptor structure + * t - pointer to termios parameters + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_status_code +sh4uart_set_attributes(sh4uart *uart, const struct termios *t) +{ + int level; + speed_t baud; + rtems_unsigned16 smr; + + smr = (rtems_unsigned16)(*(rtems_unsigned8 *)SH7750_SCSMR(uart->chn)); + + baud = cfgetospeed(t); + + /* Set flow control XXX*/ + if ((t->c_cflag & CRTSCTS) != 0) + { + } + + /* Set character size -- only 7 or 8 bit */ + switch (t->c_cflag & CSIZE) + { + case CS5: + case CS6: + case CS7: smr |= SH7750_SCSMR_CHR_7; break; + case CS8: smr &= ~SH7750_SCSMR_CHR_7; break; + } + + /* Set number of stop bits */ + if ((t->c_cflag & CSTOPB) != 0) + smr |= SH7750_SCSMR_STOP_2; + else + smr &= ~SH7750_SCSMR_STOP_2; + + /* Set parity mode */ + if ((t->c_cflag & PARENB) != 0) + { + smr |= SH7750_SCSMR_PE; + if ((t->c_cflag & PARODD) != 0) + smr |= SH7750_SCSMR_PM_ODD; + else + smr &= ~SH7750_SCSMR_PM_ODD; + } + else + smr &= ~SH7750_SCSMR_PE; + + rtems_interrupt_disable(level); + /* wait untill all data is transmitted */ + rtems_task_wake_after(RTEMS_MILLISECONDS_TO_TICKS(100)); + /* disable operations */ + SCSCR(uart->chn) &= ~(SH7750_SCSCR_TE | SH7750_SCSCR_RE); + + sh4uart_set_baudrate(uart, baud); + SCSMR(uart->chn) = (rtems_unsigned8)smr; + + /* enable operations */ + SCSCR(uart->chn) |= SH7750_SCSCR_TE | SH7750_SCSCR_RE; + rtems_interrupt_enable(level); + + return RTEMS_SUCCESSFUL; +} + +/* + * sh4uart_handle_error -- + * Perfoms error (Overrun, Framing & Parity) handling + * + * PARAMETERS: + * uart - pointer to UART descriptor structure + * + * RETURNS: + * nothing + */ +void +sh4uart_handle_error(sh4uart *uart) +{ +#if 0 + int status_reg = SCSSR(uart->chn); +#endif + + if(uart->chn == SH4_SCI) + { + SCSSR1 &= ~(SH7750_SCSSR1_ORER | SH7750_SCSSR1_FER | SH7750_SCSSR1_PER); + } + else + { + SCSSR2 &= ~(SH7750_SCSSR2_ER | SH7750_SCSSR2_BRK | SH7750_SCSSR2_FER); + SCLSR2 &= ~(SH7750_SCLSR2_ORER); + } +} + +/* + * sh4uart_poll_read -- + * This function tried to read character from SH-4 UART and perform + * error handling. When parity or framing error occured, return + * value dependent on termios input mode flags: + * - received character, if IGNPAR == 1 + * - 0, if IGNPAR == 0 and PARMRK == 0 + * - 0xff and 0x00 on next poll_read invocation, if IGNPAR == 0 and + * PARMRK == 1 + * + * PARAMETERS: + * uart - pointer to UART descriptor structure + * + * RETURNS: + * code of received character or -1 if no characters received. + */ +int +sh4uart_poll_read(sh4uart *uart) +{ + int chn = uart->chn; + int error_occured = 0; + int parity_error = 0; + int break_occured = 0; + int ch; + + if (uart->parerr_mark_flag == 1) + { + uart->parerr_mark_flag = 0; + return 0; + } + + if (chn == SH4_SCI) + { + if ((SCSSR1 & (SH7750_SCSSR1_PER | SH7750_SCSSR1_FER | + SH7750_SCSSR1_ORER)) != 0) + { + error_occured = 1; + if (SCSSR1 & (SH7750_SCSSR1_PER | SH7750_SCSSR1_FER)) + parity_error = 1; + sh4uart_handle_error(uart); + } + if ((SCSSR1 & SH7750_SCSSR1_RDRF) == 0) + return -1; + } + else + { + if ((SCSSR2 & (SH7750_SCSSR2_ER | SH7750_SCSSR2_DR | + SH7750_SCSSR2_BRK)) != 0 || + (SCLSR2 & SH7750_SCLSR2_ORER) != 0) + { + error_occured = 1; + if (SCSSR2 & (SH7750_SCSSR1_PER | SH7750_SCSSR1_FER)) + parity_error = 1; + if (SCSSR2 & SH7750_SCSSR2_BRK) + break_occured = 1; + sh4uart_handle_error(uart); + } + if ((SCSSR2 & SH7750_SCSSR2_RDF) == 0) + return -1; + } + + if (parity_error && !(uart->c_iflag & IGNPAR)) + { + if (uart->c_iflag & PARMRK) + { + uart->parerr_mark_flag = 1; + return 0xff; + } + else + return 0; + } + + if (break_occured && !(uart->c_iflag & BRKINT)) + { + if (uart->c_iflag & IGNBRK) + return 0; + else + return 0; /* XXX -- SIGINT */ + } + + ch = SCRDR(chn); + if (uart->chn == SH4_SCI) + SCSSR1 &= ~SH7750_SCSSR1_RDRF; + else + SCSSR2 &= ~SH7750_SCSSR2_RDF; + + return ch; +} + +/* + * sh4uart_poll_write -- + * This function transmit buffer byte-by-byte in polling mode. + * + * PARAMETERS: + * uart - pointer to the UART descriptor structure + * buf - pointer to transmit buffer + * len - transmit buffer length + * + * RETURNS: + * 0 + */ +int +sh4uart_poll_write(sh4uart *uart, const char *buf, int len) +{ + while (len) + { + if (uart->chn == SH4_SCI) + { + while ((SCSSR1 & SH7750_SCSSR1_TDRE) != 0) + { + SCTDR1 = *buf++; + len--; + SCSSR1 &= ~SH7750_SCSSR1_TDRE; + } + } + else + { + while ((SCSSR2 & SH7750_SCSSR2_TDFE) != 0) + { + int i; + for (i = 0; + i < 16 - TRANSMIT_TRIGGER_VALUE(SCFCR2 & + SH7750_SCFCR2_TTRG); + i++) + { + SCTDR2 = *buf++; + len--; + } + while ((SCSSR2 & SH7750_SCSSR2_TDFE) == 0 || + (SCSSR2 & SH7750_SCSSR2_TEND) == 0); + SCSSR2 &= ~(SH7750_SCSSR1_TDRE | SH7750_SCSSR2_TEND); + } + } + } + return 0; +} + +/********************************** + * Functions to handle interrupts * + **********************************/ +/* sh4uart1_interrupt_receive -- + * UART interrupt handler routine -- SCI + * Receiving data + * + * PARAMETERS: + * vec - interrupt vector number + * + * RETURNS: + * none + */ +static rtems_isr +sh4uart1_interrupt_receive(rtems_vector_number vec) +{ + register int bp = 0; + char buf[32]; + + /* Find UART descriptor from vector number */ + sh4uart *uart = &sh4_uarts[0]; + + while (1) + { + if ((bp < sizeof(buf) - 1) && ((SCSSR1 & SH7750_SCSSR1_RDRF) != 0)) + { + /* Receive character and handle frame/parity errors */ + if ((SCSSR1 & (SH7750_SCSSR1_PER | SH7750_SCSSR1_FER | + SH7750_SCSSR1_ORER)) != 0) + { + if (SCSSR1 & (SH7750_SCSSR1_PER | SH7750_SCSSR1_FER)) + { + if(!(uart->c_iflag & IGNPAR)) + { + if (uart->c_iflag & PARMRK) + { + buf[bp++] = 0xff; + buf[bp++] = 0x00; + } + else + buf[bp++] = 0x00; + } + else + buf[bp++] = SCRDR1; + } + sh4uart_handle_error(uart); + } + else + buf[bp++] = SCRDR1; + SCSSR1 &= ~SH7750_SCSSR1_RDRF; + } + else + { + if (bp != 0) + rtems_termios_enqueue_raw_characters(uart->tty, buf, bp); + break; + } + } +} + +/* sh4uart2_interrupt_receive -- + * UART interrupt handler routine -- SCIF + * Receiving data + * + * PARAMETERS: + * vec - interrupt vector number + * + * RETURNS: + * none + */ +static rtems_isr +sh4uart2_interrupt_receive(rtems_vector_number vec) +{ + register int bp = 0; + char buf[32]; + + /* Find UART descriptor from vector number */ + sh4uart *uart = &sh4_uarts[1]; + + while (1) + { + if ((bp < sizeof(buf) - 1) && ((SCSSR2 & SH7750_SCSSR2_RDF) != 0)) + { + if ((SCSSR2 & (SH7750_SCSSR2_ER | SH7750_SCSSR2_DR | + SH7750_SCSSR2_BRK)) != 0 || + (SH7750_SCLSR2 & SH7750_SCLSR2_ORER) != 0) + { + if (SCSSR2 & SH7750_SCSSR2_ER) + { + if(!(uart->c_iflag & IGNPAR)) + { + if (uart->c_iflag & PARMRK) + { + buf[bp++] = 0xff; + buf[bp++] = 0x00; + } + else + buf[bp++] = 0x00; + } + else + buf[bp++] = SCRDR1; + } + + if (SCSSR2 & SH7750_SCSSR2_BRK) + { + if (uart->c_iflag & IGNBRK) + buf[bp++] = 0x00; + else + buf[bp++] = 0x00; /* XXX -- SIGINT */ + } + + sh4uart_handle_error(uart); + } + else + buf[bp++] = SCRDR1; + SCSSR2 &= ~SH7750_SCSSR2_RDF; + } + else + { + if (bp != 0) + rtems_termios_enqueue_raw_characters(uart->tty, buf, bp); + break; + } + } +} + + +/* sh4uart1_interrupt_transmit -- + * UART interrupt handler routine -- SCI + * It continues transmit data when old part of data is transmitted + * + * PARAMETERS: + * vec - interrupt vector number + * + * RETURNS: + * none + */ +static rtems_isr +sh4uart1_interrupt_transmit(rtems_vector_number vec) +{ + /* Find UART descriptor from vector number */ + sh4uart *uart = &sh4_uarts[0]; + + if (uart->tx_buf != NULL && uart->tx_ptr < uart->tx_buf_len) + { + while ((SCSSR1 & SH7750_SCSSR1_TDRE) != 0 && + uart->tx_ptr < uart->tx_buf_len) + { + SCTDR1 = uart->tx_buf[uart->tx_ptr++]; + SCSSR1 &= ~SH7750_SCSSR1_TDRE; + } + } + else + { + register int dequeue = uart->tx_buf_len; + + uart->tx_buf = NULL; + uart->tx_ptr = uart->tx_buf_len = 0; + + /* Disable interrupts while we do not have any data to transmit */ + SCSCR1 &= ~SH7750_SCSCR_TIE; + + rtems_termios_dequeue_characters(uart->tty, dequeue); + } +} + +/* sh4uart2_interrupt_transmit -- + * UART interrupt handler routine -- SCI + * It continues transmit data when old part of data is transmitted + * + * PARAMETERS: + * vec - interrupt vector number + * + * RETURNS: + * none + */ +static rtems_isr +sh4uart2_interrupt_transmit(rtems_vector_number vec) +{ + /* Find UART descriptor from vector number */ + sh4uart *uart = &sh4_uarts[1]; + + if (uart->tx_buf != NULL && uart->tx_ptr < uart->tx_buf_len) + { + while ((SCSSR2 & SH7750_SCSSR2_TDFE) != 0) + { + int i; + for (i = 0; + i < 16 - TRANSMIT_TRIGGER_VALUE(SCFCR2 & + SH7750_SCFCR2_TTRG); + i++) + SCTDR2 = uart->tx_buf[uart->tx_ptr++]; + while ((SCSSR1 & SH7750_SCSSR1_TDRE) == 0 || + (SCSSR1 & SH7750_SCSSR1_TEND) == 0); + SCSSR1 &= ~(SH7750_SCSSR1_TDRE | SH7750_SCSSR2_TEND); + } + } + else + { + register int dequeue = uart->tx_buf_len; + + uart->tx_buf = NULL; + uart->tx_ptr = uart->tx_buf_len = 0; + + /* Disable interrupts while we do not have any data to transmit */ + SCSCR2 &= ~SH7750_SCSCR_TIE; + + rtems_termios_dequeue_characters(uart->tty, dequeue); + } +} + +/* sh4uart_interrupt_write -- + * This function initiate transmitting of the buffer in interrupt mode. + * + * PARAMETERS: + * uart - pointer to the UART descriptor structure + * buf - pointer to transmit buffer + * len - transmit buffer length + * + * RETURNS: + * 0 + */ +rtems_status_code +sh4uart_interrupt_write(sh4uart *uart, const char *buf, int len) +{ + int level; + + while ((SCSSR1 & SH7750_SCSSR1_TEND) == 0); + + rtems_interrupt_disable(level); + + uart->tx_buf = buf; + uart->tx_buf_len = len; + uart->tx_ptr = 0; + + if (uart->chn == SH4_SCI) + { + SCSCR1 |= SH7750_SCSCR_TIE; + } + else + SCSCR2 |= SH7750_SCSCR_TIE; + + rtems_interrupt_enable(level); + + return RTEMS_SUCCESSFUL; +} + +/* sh4uart_stop_remote_tx -- + * This function stop data flow from remote device. + * + * PARAMETERS: + * uart - pointer to the UART descriptor structure + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_status_code +sh4uart_stop_remote_tx(sh4uart *uart) +{ + SCSCR(uart->chn) &= ~(SH7750_SCSCR_RIE | SH7750_SCSCR_RE); + return RTEMS_SUCCESSFUL; +} + +/* sh4uart_start_remote_tx -- + * This function resume data flow from remote device. + * + * PARAMETERS: + * uart - pointer to the UART descriptor structure + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_status_code +sh4uart_start_remote_tx(sh4uart *uart) +{ + SCSCR(uart->chn) |= SH7750_SCSCR_RIE | SH7750_SCSCR_RE; + return RTEMS_SUCCESSFUL; +} + +#ifdef SH4_WITH_IPL +/********************************* + * Functions for SH-IPL gdb stub * + *********************************/ + +/* + * ipl_finish -- + * Says gdb that program finished to get out from it. + */ +extern void ipl_finish(void); +asm( +" .global _ipl_finish\n" +"_ipl_finish:\n" +" mov.l __ipl_finish_value, r0\n" +" trapa #0x3f\n" +" nop\n" +" rts\n" +" nop\n" +" .align 4\n" +"__ipl_finish_value:\n" +" .long 255" +); + +extern int ipl_serial_input(int poll_count); +asm( +" .global _ipl_serial_input\n" +"_ipl_serial_input:\n" +" mov #1,r0\n" +" trapa #0x3f\n" +" nop\n" +" rts\n" +" nop\n"); + +extern void ipl_serial_output(const char *buf, int len); +asm ( +" .global _ipl_serial_output\n" +"_ipl_serial_output:\n" +" mov #0,r0\n" +" trapa #0x3f\n" +" nop\n" +" rts\n" +" nop\n"); + +/* ipl_console_poll_read -- + * poll read operation for simulator console through ipl mechanism. + * + * PARAMETERS: + * minor - minor device number + * + * RETURNS: + * character code red from UART, or -1 if there is no characters + * available + */ +int +ipl_console_poll_read(int minor) +{ + unsigned char buf; + buf = ipl_serial_input(0x100000); + return buf; +} + +/* ipl_console_poll_write -- + * wrapper for polling mode write function + * + * PARAMETERS: + * minor - minor device number + * buf - output buffer + * len - output buffer length + * + * RETURNS: + * result code (0) + */ +int +ipl_console_poll_write(int minor, const char *buf, int len) +{ + int c; + while (len > 0) + { + c = (len < 64 ? len : 64); + ipl_serial_output(buf, c); + len -= c; + buf += c; + } + return 0; +} +#endif diff --git a/c/src/lib/libcpu/sh/sh7750/score/.cvsignore b/c/src/lib/libcpu/sh/sh7750/score/.cvsignore new file mode 100644 index 0000000000..282522db03 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/score/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/c/src/lib/libcpu/sh/sh7750/score/Makefile.am b/c/src/lib/libcpu/sh/sh7750/score/Makefile.am new file mode 100644 index 0000000000..06b4cad533 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/score/Makefile.am @@ -0,0 +1,31 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/score.rel + +C_FILES = cpu_asm.c ispsh7750.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(top_srcdir)/../../../../../../make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/compile.am +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = ispsh7750.c cpu_asm.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/score/cpu_asm.c b/c/src/lib/libcpu/sh/sh7750/score/cpu_asm.c new file mode 100644 index 0000000000..b4ae06861c --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/score/cpu_asm.c @@ -0,0 +1,312 @@ +/* + * This file contains the basic algorithms for all assembly code used + * in an specific CPU port of RTEMS. These algorithms must be implemented + * in assembly language + * + * NOTE: This port uses a C file with inline assembler instructions + * + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + */ + +/* + * This is supposed to be an assembly file. This means that system.h + * and cpu.h should not be included in a "real" cpu_asm file. An + * implementation in assembly should include "cpu_asm.h" + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* from cpu_isps.c */ +extern proc_ptr _Hardware_isr_Table[]; + +#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) + unsigned long *_old_stack_ptr; +#endif + +register unsigned long *stack_ptr asm("r15"); + +/* + * _CPU_Context_save_fp_context + * + * This routine is responsible for saving the FP context + * at *fp_context_ptr. If the point to load the FP context + * from is changed then the pointer is modified by this routine. + * + * Sometimes a macro implementation of this is in cpu.h which dereferences + * the ** and a similarly named routine in this file is passed something + * like a (Context_Control_fp *). The general rule on making this decision + * is to avoid writing assembly language. + */ + +void _CPU_Context_save_fp( + void **fp_context_ptr /* r4 */ +) +{ +#if SH_HAS_FPU + +asm volatile(" + mov.l @%0,r4 + add %1,r4 + sts.l fpscr,@-r4 + sts.l fpul,@-r4 + lds %2,fpscr + fmov dr14,@-r4 + fmov dr12,@-r4 + fmov dr10,@-r4 + fmov dr8,@-r4 + fmov dr6,@-r4 + fmov dr4,@-r4 + fmov dr2,@-r4 + fmov dr0,@-r4 + " +#ifdef SH4_USE_X_REGISTERS + " + lds %3,fpscr + fmov xd14,@-r4 + fmov xd12,@-r4 + fmov xd10,@-r4 + fmov xd8,@-r4 + fmov xd6,@-r4 + fmov xd4,@-r4 + fmov xd2,@-r4 + fmov xd0,@-r4 + " +#endif + "lds %4,fpscr + " + : + : "r"(fp_context_ptr), "r"(sizeof(Context_Control_fp)), + "r"(SH4_FPSCR_SZ), "r"(SH4_FPSCR_PR | SH4_FPSCR_SZ), "r"(SH4_FPSCR_PR) + : "r4", "r0"); + +#endif +} + +/* + * _CPU_Context_restore_fp_context + * + * This routine is responsible for restoring the FP context + * at *fp_context_ptr. If the point to load the FP context + * from is changed then the pointer is modified by this routine. + * + * Sometimes a macro implementation of this is in cpu.h which dereferences + * the ** and a similarly named routine in this file is passed something + * like a (Context_Control_fp *). The general rule on making this decision + * is to avoid writing assembly language. + */ + +void _CPU_Context_restore_fp( + void **fp_context_ptr /* r4 */ +) +{ +#if SH_HAS_FPU + +asm volatile(" + mov.l @%0,r4 + " +#ifdef SH4_USE_X_REGISTERS + " + lds %1,fpscr + fmov @r4+,xd0 + fmov @r4+,xd2 + fmov @r4+,xd4 + fmov @r4+,xd6 + fmov @r4+,xd8 + fmov @r4+,xd10 + fmov @r4+,xd12 + fmov @r4+,xd14 + " +#endif + " + lds %2,fpscr + fmov @r4+,dr0 + fmov @r4+,dr2 + fmov @r4+,dr4 + fmov @r4+,dr6 + fmov @r4+,dr8 + fmov @r4+,dr10 + fmov @r4+,dr12 + fmov @r4+,dr14 + lds.l @r4+,fpul + lds.l @r4+,fpscr + " : + : "r"(fp_context_ptr), "r"(SH4_FPSCR_PR | SH4_FPSCR_SZ), "r"(SH4_FPSCR_SZ) + : "r4", "r0"); + +#endif +} + +/* _CPU_Context_switch + * + * This routine performs a normal non-FP context switch. + */ + +/* within __CPU_Context_switch: + * _CPU_Context_switch + * _CPU_Context_restore + * + * This routine is generally used only to restart self in an + * efficient manner. It may simply be a label in _CPU_Context_switch. + * + * NOTE: It should be safe not to store r4, r5 + * + * NOTE: It is doubtful if r0 is really needed to be stored + * + * NOTE: gbr is added, but should not be necessary, as it is + * only used globally in this port. + */ + +/* + * FIXME: This is an ugly hack, but we wanted to avoid recalculating + * the offset each time Context_Control is changed + */ +void __CPU_Context_switch( + Context_Control *run, /* r4 */ + Context_Control *heir /* r5 */ +) +{ + +asm volatile(" + .global __CPU_Context_switch +__CPU_Context_switch: + + add %0,r4 + + stc.l sr,@-r4 + stc.l gbr,@-r4 + mov.l r0,@-r4 + mov.l r1,@-r4 + mov.l r2,@-r4 + mov.l r3,@-r4 + + mov.l r6,@-r4 + mov.l r7,@-r4 + mov.l r8,@-r4 + mov.l r9,@-r4 + mov.l r10,@-r4 + mov.l r11,@-r4 + mov.l r12,@-r4 + mov.l r13,@-r4 + mov.l r14,@-r4 + sts.l pr,@-r4 + sts.l mach,@-r4 + sts.l macl,@-r4 + mov.l r15,@-r4 + + mov r5, r4" + :: "I" (sizeof(Context_Control)) + ); + + asm volatile(" + .global __CPU_Context_restore +__CPU_Context_restore: + mov.l @r4+,r15 + lds.l @r4+,macl + lds.l @r4+,mach + lds.l @r4+,pr + mov.l @r4+,r14 + mov.l @r4+,r13 + mov.l @r4+,r12 + mov.l @r4+,r11 + mov.l @r4+,r10 + mov.l @r4+,r9 + mov.l @r4+,r8 + mov.l @r4+,r7 + mov.l @r4+,r6 + + mov.l @r4+,r3 + mov.l @r4+,r2 + mov.l @r4+,r1 + mov.l @r4+,r0 + ldc.l @r4+,gbr + ldc.l @r4+,sr + + rts + nop" ); +} + +/* + * This routine provides the RTEMS interrupt management. + */ + +void __ISR_Handler( unsigned32 vector) +{ + register unsigned32 level; + + _CPU_ISR_Disable( level ); + + _Thread_Dispatch_disable_level++; + +#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) + if( _ISR_Nest_level == 0 ) + { + /* Install irq stack */ + _old_stack_ptr = stack_ptr; + stack_ptr = _CPU_Interrupt_stack_high; + } + +#endif + + _ISR_Nest_level++; + + _CPU_ISR_Enable( level ); + + /* call isp */ + if( _ISR_Vector_table[ vector]) + (*_ISR_Vector_table[ vector ])( vector ); + + _CPU_ISR_Disable( level ); + + _ISR_Nest_level--; + +#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) + + if( _ISR_Nest_level == 0 ) + /* restore old stack pointer */ + stack_ptr = _old_stack_ptr; +#endif + + _Thread_Dispatch_disable_level--; + + _CPU_ISR_Enable( level ); + + if ( _Thread_Dispatch_disable_level == 0 ) + { + if(( _Context_Switch_necessary) || (! _ISR_Signals_to_thread_executing)) + { + _ISR_Signals_to_thread_executing = FALSE; + _Thread_Dispatch(); + } + } +} diff --git a/c/src/lib/libcpu/sh/sh7750/score/ispsh7750.c b/c/src/lib/libcpu/sh/sh7750/score/ispsh7750.c new file mode 100644 index 0000000000..e8b08dbbe9 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/score/ispsh7750.c @@ -0,0 +1,351 @@ +/* + * SH7750 interrupt support. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov + * + * Based on work: + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE + * + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to reflect isp entries for sh7045 processor: + * John M. Mills (jmills@tga.com) + * TGA Technologies, Inc. + * 100 Pinnacle Way, Suite 140 + * Norcross, GA 30071 U.S.A. + * August, 1999 + * + * This modified file may be copied and distributed in accordance + * the above-referenced license. It is provided for critique and + * developmental purposes without any warranty nor representation + * by the authors or by TGA Technologies. + * + * $Id$ + */ + +#include +#include +#include + +#if !defined (sh7750) +#error Wrong CPU MODEL +#endif + +/* + * This is a exception vector table + * + * It has the same structure as the actual vector table (vectab) + */ + + +#include +#include + +/* VBR register contents saved on startup -- used to hook exception by debug + * agent */ +void *_VBR_Saved; + +/*PAGE + * + * _CPU_ISR_install_vector + * + * This kernel routine installs the RTEMS handler for the + * specified vector. + * + * Input parameters: + * vector - interrupt vector number + * old_handler - former ISR for this vector number + * new_handler - replacement ISR for this vector number + * + * Output parameters: NONE + * + */ +void _CPU_ISR_install_vector( + unsigned32 vector, + proc_ptr new_handler, + proc_ptr *old_handler +) +{ + *old_handler = _ISR_Vector_table[vector]; + _ISR_Vector_table[vector] = new_handler; +} + + +#define __STRINGIFY1__(x) #x +#define __STRINGIFY__(x) __STRINGIFY1__(x) + +#define STOP_TIMER \ + " mov.l TSTR_k,r0 \n" \ + " mov.b @r0,r1 \n" \ + " and #" __STRINGIFY__(~SH7750_TSTR_STR0) ",r1\n" \ + " mov.b r1,@r0 \n" + +#define START_TIMER \ + " mov.l TSTR_k,r0 \n" \ + " mov.b @r0,r1 \n" \ + " or #" __STRINGIFY__(SH7750_TSTR_STR0) ",r1\n" \ + " mov.b r1,@r0 \n" + +asm (" .text\n" + " .balign 256\n" + " .global __vbr_base\n" + "__vbr_base:\n" + " .org __vbr_base + 0x100\n" + "vbr_100:\n" + " mov.l r0,@-r15\n" + " mov.l r1,@-r15\n" + " mov.l __VBR_Saved100_k, r0\n" + " mov.l offset100_k,r1\n" + " mov.l @r0,r0\n" + " add r1,r0\n" + " mov.l @r15+,r1\n" + " jmp @r0\n" + " mov.l @r15+,r0\n" + " .align 2\n" + "__VBR_Saved100_k:\n" + " .long __VBR_Saved\n" + "offset100_k:\n" + " .long 0x100\n" + + " .org __vbr_base + 0x400\n" + "vbr_400:\n" + " mov.l r0,@-r15\n" + " mov.l r1,@-r15\n" + " mov.l __VBR_Saved400_k, r0\n" + " mov.l offset400_k,r1\n" + " mov.l @r0,r0\n" + " add r1,r0\n" + " mov.l @r15+,r1\n" + " jmp @r0\n" + " mov.l @r15+,r0\n" + " .align 2\n" + "__VBR_Saved400_k:\n" + " .long __VBR_Saved\n" + "offset400_k:\n" + " .long 0x400\n" + + " .org __vbr_base + 0x600\n" + "vbr_600:\n" + " mov.l r0,@-r15 \n" + " mov.l r1,@-r15 \n" + " stc sr,r0 \n" + " mov.l __vbr_600_sr_and_k,r1\n" + " and r1,r0 \n" + " mov.l __vbr_600_sr_or_k,r1\n" + " or r1,r0 \n" + " ldc r0,sr \n" + " ldc.l @r15+,r1_bank\n" + " ldc.l @r15+,r0_bank\n" + " mov.l r0,@-r15 \n" + " mov.l r1,@-r15 \n" + " mov.l r2,@-r15 \n" + " mov.l r3,@-r15 \n" + " mov.l r4,@-r15 \n" + " mov.l r5,@-r15 \n" + " mov.l r6,@-r15 \n" + " mov.l r7,@-r15 \n" +#if 0 + " mov.l r8,@-r15 \n" + " mov.l r9,@-r15 \n" + " mov.l r10,@-r15 \n" + " mov.l r11,@-r15 \n" + " mov.l r12,@-r15 \n" + " mov.l r13,@-r15 \n" +#endif + " mov.l r14,@-r15 \n" + " sts.l fpscr,@-r15\n" + " sts.l fpul,@-r15 \n" + " mov.l __ISR_temp_fpscr_k,r0 \n" + " lds r0,fpscr \n" + " fmov fr0,@-r15 \n" + " fmov fr1,@-r15 \n" + " fmov fr2,@-r15 \n" + " fmov fr3,@-r15 \n" + " fmov fr4,@-r15 \n" + " fmov fr5,@-r15 \n" + " fmov fr6,@-r15 \n" + " fmov fr7,@-r15 \n" + " fmov fr8,@-r15 \n" + " fmov fr9,@-r15 \n" + " fmov fr10,@-r15 \n" + " fmov fr11,@-r15 \n" + " fmov fr12,@-r15 \n" + " fmov fr13,@-r15 \n" + " fmov fr14,@-r15 \n" + " fmov fr15,@-r15 \n" + + " sts.l pr,@-r15 \n" + " sts.l mach,@-r15 \n" + " sts.l macl,@-r15 \n" + " stc.l spc,@-r15 \n" + " stc.l ssr,@-r15 \n" + " mov r15,r14 \n" +#if 0 + " stc ssr,r0 \n" + " ldc r0,sr \n" +#endif + " mov.l __ISR_Handler_k, r1\n" + " mov.l _INTEVT_k,r4\n" + " mov.l @r4,r4 \n" + " shlr2 r4 \n" + " shlr r4 \n" + + " mov.l _ISR_Table_k,r0\n" + " mov.l @r0,r0 \n" + " add r4,r0 \n" + " mov.l @r0,r0 \n" + " cmp/eq #0,r0 \n" + " bt _ipl_hook \n" + + + " jsr @r1 \n" + " shlr2 r4 \n" + " mov r14,r15 \n" + " ldc.l @r15+,ssr \n" + " ldc.l @r15+,spc \n" + " lds.l @r15+,macl \n" + " lds.l @r15+,mach \n" + " lds.l @r15+,pr \n" + " mov.l __ISR_temp_fpscr_k,r0 \n" + " lds r0,fpscr \n" + + " fmov @r15+,fr15 \n" + " fmov @r15+,fr14 \n" + " fmov @r15+,fr13 \n" + " fmov @r15+,fr12 \n" + " fmov @r15+,fr11 \n" + " fmov @r15+,fr10 \n" + " fmov @r15+,fr9 \n" + " fmov @r15+,fr8 \n" + " fmov @r15+,fr7 \n" + " fmov @r15+,fr6 \n" + " fmov @r15+,fr5 \n" + " fmov @r15+,fr4 \n" + " fmov @r15+,fr3 \n" + " fmov @r15+,fr2 \n" + " fmov @r15+,fr1 \n" + " fmov @r15+,fr0 \n" + " lds.l @r15+,fpul \n" + " lds.l @r15+,fpscr\n" + " mov.l @r15+,r14 \n" +#if 0 + " mov.l @r15+,r13 \n" + " mov.l @r15+,r12 \n" + " mov.l @r15+,r11 \n" + " mov.l @r15+,r10 \n" + " mov.l @r15+,r9 \n" + " mov.l @r15+,r8 \n" +#endif + + " mov.l @r15+,r7 \n" + " mov.l @r15+,r6 \n" + " mov.l @r15+,r5 \n" + " mov.l @r15+,r4 \n" + " mov.l @r15+,r3 \n" + " mov.l @r15+,r2 \n" + " mov.l @r15+,r1 \n" + " mov.l @r15+,r0 \n" + " rte \n" + " nop \n" + " .align 2 \n" + "__vbr_600_sr_and_k: \n" + " .long " __STRINGIFY__(~(SH4_SR_RB | SH4_SR_BL)) "\n" + "__vbr_600_sr_or_k: \n" + " .long " __STRINGIFY__(SH4_SR_IMASK) "\n" + "__ISR_Handler_k: \n" + " .long ___ISR_Handler\n" + "_INTEVT_k: \n" + " .long " __STRINGIFY__(SH7750_INTEVT) "\n" + "_ISR_Table_k: \n" + " .long __ISR_Vector_table\n" + + "_ipl_hook: \n" + " mov r14,r15 \n" + " ldc.l @r15+,ssr \n" + " ldc.l @r15+,spc \n" + " lds.l @r15+,macl \n" + " lds.l @r15+,mach \n" + " lds.l @r15+,pr \n" + " mov.l __ISR_temp_fpscr_k,r0 \n" + " lds r0,fpscr \n" + " fmov @r15+,fr15 \n" + " fmov @r15+,fr14 \n" + " fmov @r15+,fr13 \n" + " fmov @r15+,fr12 \n" + " fmov @r15+,fr11 \n" + " fmov @r15+,fr10 \n" + " fmov @r15+,fr9 \n" + " fmov @r15+,fr8 \n" + " fmov @r15+,fr7 \n" + " fmov @r15+,fr6 \n" + " fmov @r15+,fr5 \n" + " fmov @r15+,fr4 \n" + " fmov @r15+,fr3 \n" + " fmov @r15+,fr2 \n" + " fmov @r15+,fr1 \n" + " fmov @r15+,fr0 \n" + " lds.l @r15+,fpul \n" + " lds.l @r15+,fpscr\n" + " mov.l @r15+,r14 \n" + + " mov.l @r15+,r13 \n" + " mov.l @r15+,r12 \n" + " mov.l @r15+,r11 \n" + " mov.l @r15+,r10 \n" + " mov.l @r15+,r9 \n" + " mov.l @r15+,r8 \n" + + + " mov.l @r15+,r7 \n" + " mov.l @r15+,r6 \n" + " mov.l @r15+,r5 \n" + " mov.l @r15+,r4 \n" + " mov.l @r15+,r3 \n" + " mov.l @r15+,r2 \n" + " mov.l __VBR_Saved600_k, r0\n" + " mov.l offset600_k,r1\n" + " mov.l @r0,r0\n" + " add r1,r0\n" + " mov.l @r15+,r1\n" + " jmp @r0\n" + " mov.l @r15+,r0\n" + " .align 2\n" + "__ISR_temp_fpscr_k: \n" + " .long " __STRINGIFY__(SH4_FPSCR_PR) " \n" + "__VBR_Saved600_k:\n" + " .long __VBR_Saved\n" + "offset600_k:\n" + " .long 0x600\n" + + ); + + +/************************************************ + * Dummy interrupt service procedure for + * interrupts being not allowed --> Trap 2 + ************************************************/ +asm(" .section .text +.global __dummy_isp +__dummy_isp: + mov.l r14,@-r15 + mov r15, r14 + trapa #2 + mov.l @r15+,r14 + rte + nop"); + diff --git a/c/src/lib/libcpu/sh/sh7750/timer/.cvsignore b/c/src/lib/libcpu/sh/sh7750/timer/.cvsignore new file mode 100644 index 0000000000..282522db03 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/timer/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/c/src/lib/libcpu/sh/sh7750/timer/Makefile.am b/c/src/lib/libcpu/sh/sh7750/timer/Makefile.am new file mode 100644 index 0000000000..103b675fe4 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/timer/Makefile.am @@ -0,0 +1,31 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/timer.rel + +C_FILES = timer.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(top_srcdir)/../../../../../../make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/compile.am +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = timer.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libcpu/sh/sh7750/timer/timer.c b/c/src/lib/libcpu/sh/sh7750/timer/timer.c new file mode 100644 index 0000000000..9ce8c9ae58 --- /dev/null +++ b/c/src/lib/libcpu/sh/sh7750/timer/timer.c @@ -0,0 +1,292 @@ +/* + * timer driver for the Hitachi SH 7750 + * + * This file manages the benchmark timer used by the RTEMS Timing Test + * Suite. Each measured time period is demarcated by calls to + * Timer_initialize() and Read_timer(). Read_timer() usually returns + * the number of microseconds since Timer_initialize() exitted. + * + * NOTE: It is important that the timer start/stop overhead be + * determined when porting or modifying this code. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include + +#include +#include + +#ifndef TIMER_PRIO +#define TIMER_PRIO 15 +#endif + +/* Timer prescaler division ratio */ +#define TIMER_PRESCALER 4 +#define TCR1_TPSC SH7750_TCR_TPSC_DIV4 + +#define TIMER_VECTOR SH7750_EVT_TO_NUM(SH7750_EVT_TUNI1) + +rtems_isr timerisr(); + +static rtems_unsigned32 Timer_interrupts; + +/* Counter should be divided to this value to obtain time in microseconds */ +static rtems_unsigned32 microseconds_divider; + +/* Interrupt period in microseconds */ +static rtems_unsigned32 microseconds_per_int; + +rtems_boolean Timer_driver_Find_average_overhead; + +/* Timer_initialize -- + * Initialize Timer 1 to operate as a RTEMS benchmark timer: + * - determine timer clock frequency + * - install timer interrupt handler + * - configure the Timer 1 hardware + * - start the timer + * + * PARAMETERS: + * none + * + * RETURNS: + * none + */ +void +Timer_initialize(void) +{ + rtems_unsigned8 temp8; + rtems_unsigned16 temp16; + rtems_interrupt_level level; + rtems_isr *ignored; + int cpudiv = 1; + int tidiv = 1; + + Timer_interrupts = 0; + _CPU_ISR_Disable(level); + + /* Get CPU frequency divider from clock unit */ + switch (read16(SH7750_FRQCR) & SH7750_FRQCR_IFC) + { + case SH7750_FRQCR_IFCDIV1: + cpudiv = 1; + break; + + case SH7750_FRQCR_IFCDIV2: + cpudiv = 2; + break; + + case SH7750_FRQCR_IFCDIV3: + cpudiv = 3; + break; + + case SH7750_FRQCR_IFCDIV4: + cpudiv = 4; + break; + + case SH7750_FRQCR_IFCDIV6: + cpudiv = 6; + break; + + case SH7750_FRQCR_IFCDIV8: + cpudiv = 8; + break; + + default: + rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); + } + + /* Get peripheral module frequency divider from clock unit */ + switch (read16(SH7750_FRQCR) & SH7750_FRQCR_PFC) + { + case SH7750_FRQCR_PFCDIV2: + tidiv = 2 * TIMER_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV3: + tidiv = 3 * TIMER_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV4: + tidiv = 4 * TIMER_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV6: + tidiv = 6 * TIMER_PRESCALER; + break; + + case SH7750_FRQCR_PFCDIV8: + tidiv = 8 * TIMER_PRESCALER; + break; + + default: + rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); + } + + microseconds_divider = + rtems_cpu_configuration_get_clicks_per_second() * cpudiv / + (tidiv * 1000000); + microseconds_per_int = 0xFFFFFFFF / microseconds_divider; + + /* + * Hardware specific initialization + */ + + /* Stop the Timer 0 */ + temp8 = read8(SH7750_TSTR); + temp8 &= ~SH7750_TSTR_STR1; + write8(temp8, SH7750_TSTR); + + /* Establish interrupt handler */ + _CPU_ISR_install_raw_handler( TIMER_VECTOR, timerisr, &ignored ); + + /* Reset timer constant and counter */ + write32(0xFFFFFFFF, SH7750_TCOR1); + write32(0xFFFFFFFF, SH7750_TCNT1); + + /* Select timer mode */ + write16( + SH7750_TCR_UNIE | /* Enable Underflow Interrupt */ + SH7750_TCR_CKEG_RAISE | /* Count on rising edge */ + TCR1_TPSC, /* Timer prescaler ratio */ + SH7750_TCR1); + + /* Set timer interrupt priority */ + temp16 = read16(SH7750_IPRA); + temp16 = (temp16 & ~SH7750_IPRA_TMU1) | (TIMER_PRIO << SH7750_IPRA_TMU1_S); + write16(temp16, SH7750_IPRA); + + + _CPU_ISR_Enable(level); + + /* Start the Timer 1 */ + temp8 = read8(SH7750_TSTR); + temp8 |= SH7750_TSTR_STR1; + write8(temp8, SH7750_TSTR); + +} + +/* + * The following controls the behavior of Read_timer(). + * + * AVG_OVERHEAD is the overhead for starting and stopping the timer. It + * is usually deducted from the number returned. + * + * LEAST_VALID is the lowest number this routine should trust. Numbers + * below this are "noise" and zero is returned. + */ + +#define AVG_OVERHEAD 0 /* It typically takes X.X microseconds */ + /* (Y countdowns) to start/stop the timer. */ + /* This value is in microseconds. */ +#define LEAST_VALID 0 /* 20 */ /* Don't trust a clicks value lower than this */ + +/* Read_timer -- + * Read timer value in microsecond units since timer start. + * + * PARAMETERS: + * none + * + * RETURNS: + * number of microseconds since timer has been started + */ +int +Read_timer(void) +{ + rtems_unsigned32 clicks; + rtems_unsigned32 ints; + rtems_unsigned32 total ; + rtems_interrupt_level level; + rtems_unsigned32 tcr; + + + _CPU_ISR_Disable(level); + + clicks = 0xFFFFFFFF - read32(SH7750_TCNT1); + tcr = read32(SH7750_TCR1); + ints = Timer_interrupts; + + _CPU_ISR_Enable(level); + + /* Handle the case when timer overflowed but interrupt was not processed */ + if ((clicks > 0xFF000000) && ((tcr & SH7750_TCR_UNF) != 0)) + { + ints++; + } + + total = microseconds_per_int * ints + (clicks / microseconds_divider); + + if ( Timer_driver_Find_average_overhead ) + return total; /* in microsecond units */ + else + { + if ( total < LEAST_VALID ) + return 0; /* below timer resolution */ + /* + * Somehow convert total into microseconds + */ + return (total - AVG_OVERHEAD) ; + } +} + +/* Empty_function -- + * Empty function call used in loops to measure basic cost of looping + * in Timing Test Suite. + * + * PARAMETERS: + * none + * + * RETURNS: + * RTEMS_SUCCESSFUL + */ +rtems_status_code +Empty_function( void ) +{ + return RTEMS_SUCCESSFUL; +} + +/* Set_find_average_overhead -- + * This routine is invoked by the "Check Timer" (tmck) test in the + * RTEMS Timing Test Suite. It makes the Read_timer routine not + * subtract the overhead required to initialize and read the benchmark + * timer. + * + * PARAMETERS: + * find_flag - boolean flag, TRUE if overhead must not be subtracted. + * + * RETURNS: + * none + */ +void +Set_find_average_overhead(rtems_boolean find_flag) +{ + Timer_driver_Find_average_overhead = find_flag; +} + +/* timerisr -- + * Timer interrupt handler routine. This function invoked on timer + * underflow event; once per 2^32 clocks. It should reset the timer + * event and increment timer interrupts counter. + */ +void +timerisr(void) +{ + unsigned8 temp8; + + /* reset the flags of the status register */ + temp8 = read8(SH7750_TCR1) & ~SH7750_TCR_UNF; + write8(temp8, SH7750_TCR1); + + Timer_interrupts += 1; +} -- cgit v1.2.3