From 9ec964784bf2091673a83241ab113f422b1f84d8 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Fri, 19 Mar 1999 21:54:36 +0000 Subject: Towards automake VIII patch from Ralf Corsepius : OK, I 've made up my mind to cut a big chunk of my automake-patches (:-). Below you can find a drop-in replacement of the aclocal directory. It contains a lot of new macro files, most of them are directly cut from rtems top-level configure script, some are new some are identical to former versions. The motivation behind these files is to reuse parts from rtems current top-level configure.in script in up-coming subdirectory configure.in scripts. I'd like to ask you to untar the archive ontop of the source tree and to add/commit these files to CVS. Adding these files should not have any influence on RTEMS momentary configuration (except of you are required to run aclocal -I aclocal && autoconf afterwards), because most of them currently are not used at all. --------- BTW: Please upgrade to autoconf-2.13 and automake-2.4, if you havn't done this already (egcs/CVS require them, too). My upcoming automake files require automake-2.4 which requires autoconf-2.13 or later. --- aclocal.m4 | 75 ++++- aclocal/canonical-host.m4 | 29 ++ aclocal/check-cpu.m4 | 16 + aclocal/enable-bare.m4 | 21 ++ aclocal/enable-cxx.m4 | 13 + aclocal/enable-gcc28.m4 | 12 + aclocal/enable-gmake-print.m4 | 15 + aclocal/enable-hwapi.m4 | 14 + aclocal/enable-inlines.m4 | 12 + aclocal/enable-libcdir.m4 | 9 + aclocal/enable-multiprocessing.m4 | 12 + aclocal/enable-networking.m4 | 12 + aclocal/enable-posix.m4 | 36 +++ aclocal/enable-rdbg.m4 | 12 + aclocal/enable-tests.m4 | 15 + aclocal/rtems-top.m4 | 13 + aclocal/tool-paths.m4 | 16 + configure | 640 ++++++++++++++++++++++++-------------- 18 files changed, 741 insertions(+), 231 deletions(-) create mode 100644 aclocal/canonical-host.m4 create mode 100644 aclocal/check-cpu.m4 create mode 100644 aclocal/enable-bare.m4 create mode 100644 aclocal/enable-cxx.m4 create mode 100644 aclocal/enable-gcc28.m4 create mode 100644 aclocal/enable-gmake-print.m4 create mode 100644 aclocal/enable-hwapi.m4 create mode 100644 aclocal/enable-inlines.m4 create mode 100644 aclocal/enable-libcdir.m4 create mode 100644 aclocal/enable-multiprocessing.m4 create mode 100644 aclocal/enable-networking.m4 create mode 100644 aclocal/enable-posix.m4 create mode 100644 aclocal/enable-rdbg.m4 create mode 100644 aclocal/enable-tests.m4 create mode 100644 aclocal/rtems-top.m4 create mode 100644 aclocal/tool-paths.m4 diff --git a/aclocal.m4 b/aclocal.m4 index 39691625a0..34ce96b740 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,4 +1,27 @@ -dnl aclocal.m4 generated automatically by aclocal 1.2 +dnl aclocal.m4 generated automatically by aclocal 1.4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl $Id$ + +AC_DEFUN(RTEMS_PATH_PERL, +[ +AC_PATH_PROG(PERL,perl) +if test -z "$PERL" ; then +AC_MSG_WARN( +[***] +[ perl was not found] +[ Note: Some tools will not be built.]) +fi +]) dnl dnl $Id$ @@ -42,21 +65,61 @@ AC_MSG_RESULT($rtems_cv_prog_MKDIR_M) ]) +dnl $Id$ + +AC_DEFUN(RTEMS_PATH_KSH, +[ +dnl NOTE: prefer bash over ksh over sh +AC_PATH_PROGS(KSH,bash ksh sh) +if test -z "$KSH"; then +dnl NOTE: This cannot happen -- /bin/sh must always exist +AC_MSG_ERROR( +[***] +[ Cannot determine a usable shell bash/ksh/sh] +[ Please contact your system administrator] ); +fi +]) + dnl dnl $Id$ dnl -dnl canonicalize target name +dnl canonicalize target cpu dnl NOTE: Most rtems targets do not fullfil autoconf's dnl target naming conventions "processor-vendor-os" dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them dnl and we have to fix it for rtems ourselves AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, -[AC_MSG_CHECKING(rtems target cpu) -changequote(<<, >>)dnl -target_cpu=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` -changequote([, ])dnl +[ +AC_REQUIRE([AC_CANONICAL_SYSTEM]) +AC_MSG_CHECKING(rtems target cpu) +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + target_cpu=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + target_cpu=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + target_cpu=unix + ;; + no_cpu-*rtems*) + target_cpu=no_cpu + ;; + ppc*-*rtems*) + target_cpu=powerpc + ;; + sparc-sun-solaris*) # unix "simulator" port + target_cpu=unix + ;; + *) + target_cpu=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +changequote([,])dnl AC_MSG_RESULT($target_cpu) ]) diff --git a/aclocal/canonical-host.m4 b/aclocal/canonical-host.m4 new file mode 100644 index 0000000000..38f52a61b8 --- /dev/null +++ b/aclocal/canonical-host.m4 @@ -0,0 +1,29 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_CANONICAL_HOST, +[dnl +AC_REQUIRE([AC_CANONICAL_HOST]) +RTEMS_HOST=$host_os +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + rtems_bsp="go32 go32_p5" + skip_startfiles="yes" + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HOST=Linux + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HOST=FreeBSD + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HOST=Solaris + ;; + *) + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_HOST) +])dnl + diff --git a/aclocal/check-cpu.m4 b/aclocal/check-cpu.m4 new file mode 100644 index 0000000000..89ef96e661 --- /dev/null +++ b/aclocal/check-cpu.m4 @@ -0,0 +1,16 @@ +dnl $Id$ + +dnl check if RTEMS support a cpu +AC_DEFUN(RTEMS_CHECK_CPU, +[dnl +AC_REQUIRE([RTEMS_TOP]) +AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) +# Is this a supported CPU? +AC_MSG_CHECKING([if cpu $target_cpu is supported]) +if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$target_cpu"; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR(no) +fi +])dnl + diff --git a/aclocal/enable-bare.m4 b/aclocal/enable-bare.m4 new file mode 100644 index 0000000000..fbe2e8de6d --- /dev/null +++ b/aclocal/enable-bare.m4 @@ -0,0 +1,21 @@ +AC_DEFUN(RTEMS_ENABLE_BARE, +[ +AC_ARG_ENABLE(bare-cpu-cflags, +[ --enable-bare-cpu-cflags specify a particular cpu cflag] +[ (bare bsp specific)], +[case "${enableval}" in + no) BARE_CPU_CFLAGS="" ;; + *) BARE_CPU_CFLAGS="${enableval}" ;; +esac], +[BARE_CPU_CFLAGS=""]) + +AC_ARG_ENABLE(bare-cpu-model, +[ --enable-bare-cpu-model specify a particular cpu model] +[ (bare bsp specific)], +[case "${enableval}" in + no) BARE_CPU_MODEL="" ;; + *) BARE_CPU_MODEL="${enableval}" ;; +esac], +[BARE_CPU_MODEL=""]) +]) + diff --git a/aclocal/enable-cxx.m4 b/aclocal/enable-cxx.m4 new file mode 100644 index 0000000000..68cad702a1 --- /dev/null +++ b/aclocal/enable-cxx.m4 @@ -0,0 +1,13 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_CXX, +[ +AC_ARG_ENABLE(cxx, +[ --enable-cxx enable C++ support,] +[ and build the rtems++ library], +[case "${enableval}" in + yes) RTEMS_HAS_CPLUSPLUS=yes ;; + no) RTEMS_HAS_CPLUSPLUS=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-cxx option) ;; +esac], [RTEMS_HAS_CPLUSPLUS=no]) +]) diff --git a/aclocal/enable-gcc28.m4 b/aclocal/enable-gcc28.m4 new file mode 100644 index 0000000000..5f2496f53d --- /dev/null +++ b/aclocal/enable-gcc28.m4 @@ -0,0 +1,12 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_GCC28, +[ +AC_ARG_ENABLE(gcc28, +[ --enable-gcc28 enable use of gcc 2.8.x features], +[case "${enableval}" in + yes) RTEMS_USE_GCC272=no ;; + no) RTEMS_USE_GCC272=yes ;; + *) AC_MSG_ERROR(bad value ${enableval} for gcc-28 option) ;; +esac],[RTEMS_USE_GCC272=no]) +]) diff --git a/aclocal/enable-gmake-print.m4 b/aclocal/enable-gmake-print.m4 new file mode 100644 index 0000000000..ab3c0b7282 --- /dev/null +++ b/aclocal/enable-gmake-print.m4 @@ -0,0 +1,15 @@ +dnl $Id$ +dnl +dnl Note: This option is considered obsolete + +AC_DEFUN(RTEMS_ENABLE_GMAKE_PRINT, +[ +AC_ARG_ENABLE(gmake-print-directory, +[ --enable-gmake-print-directory enable GNU Make's print directory], +[case "${enableval}" in + yes) RTEMS_USE_OWN_PDIR=no ;; + no) RTEMS_USE_OWN_PDIR=yes ;; + *) AC_MSG_ERROR(bad value ${enableval} for gmake-print-directory option) +;; +esac],[RTEMS_USE_OWN_PDIR=yes]) +]) diff --git a/aclocal/enable-hwapi.m4 b/aclocal/enable-hwapi.m4 new file mode 100644 index 0000000000..f639f29c5f --- /dev/null +++ b/aclocal/enable-hwapi.m4 @@ -0,0 +1,14 @@ +dnl $Id$ +dnl +dnl FIXME: this needs to be reworked + +AC_DEFUN(RTEMS_ENABLE_HWAPI, +[dnl +AC_ARG_ENABLE(hwapi, \ +[ --enable-hwapi enable hardware API library], +[case "${enableval}" in + yes) RTEMS_HAS_HWAPI=yes ;; + no) RTEMS_HAS_HWAPI=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for hwapi option) ;; + esac],[RTEMS_HAS_HWAPI=no]) +])dnl diff --git a/aclocal/enable-inlines.m4 b/aclocal/enable-inlines.m4 new file mode 100644 index 0000000000..b909cd4785 --- /dev/null +++ b/aclocal/enable-inlines.m4 @@ -0,0 +1,12 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_INLINES, +[AC_ARG_ENABLE(rtems-inlines, +[ --enable-rtems-inlines enable RTEMS inline functions] +[ (use macros)], +[case "${enableval}" in + yes) RTEMS_USE_MACROS=no ;; + no) RTEMS_USE_MACROS=yes ;; + *) AC_MSG_ERROR(bad value ${enableval} for disable-rtems-inlines option) ;; +esac],[RTEMS_USE_MACROS=no]) +]) diff --git a/aclocal/enable-libcdir.m4 b/aclocal/enable-libcdir.m4 new file mode 100644 index 0000000000..a3195dfd3a --- /dev/null +++ b/aclocal/enable-libcdir.m4 @@ -0,0 +1,9 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_LIBCDIR, +[ +AC_ARG_ENABLE(libcdir, +[ --enable-libcdir=directory set the directory for the C library], +[ RTEMS_LIBC_DIR="${enableval}" ; \ +test -d ${enableval} || AC_MSG_ERROR("$enableval is not a directory" ) ] ) +]) diff --git a/aclocal/enable-multiprocessing.m4 b/aclocal/enable-multiprocessing.m4 new file mode 100644 index 0000000000..a53f7e07f7 --- /dev/null +++ b/aclocal/enable-multiprocessing.m4 @@ -0,0 +1,12 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING, +[ +AC_ARG_ENABLE(multiprocessing, +[ --enable-multiprocessing enable multiprocessing interface], +[case "${enableval}" in + yes) RTEMS_HAS_MULTIPROCESSING=yes ;; + no) RTEMS_HAS_MULTIPROCESSING=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;; +esac],[RTEMS_HAS_MULTIPROCESSING=no]) +]) diff --git a/aclocal/enable-networking.m4 b/aclocal/enable-networking.m4 new file mode 100644 index 0000000000..bb0fd76717 --- /dev/null +++ b/aclocal/enable-networking.m4 @@ -0,0 +1,12 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_NETWORKING, +[ +AC_ARG_ENABLE(networking, +[ --enable-networking enable TCP/IP stack], +[case "${enableval}" in + yes) RTEMS_HAS_NETWORKING=yes ;; + no) RTEMS_HAS_NETWORKING=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-networking option) ;; +esac],[RTEMS_HAS_NETWORKING=yes]) +]) diff --git a/aclocal/enable-posix.m4 b/aclocal/enable-posix.m4 new file mode 100644 index 0000000000..a027f86e43 --- /dev/null +++ b/aclocal/enable-posix.m4 @@ -0,0 +1,36 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_POSIX, +[ +AC_ARG_ENABLE(posix, +[ --enable-posix enable posix interface], +[case "${enableval}" in + yes) RTEMS_HAS_POSIX_API=yes ;; + no) RTEMS_HAS_POSIX_API=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;; +esac],[RTEMS_HAS_POSIX_API=yes]) + +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + no_cpu-*rtems*) + RTEMS_HAS_POSIX_API=no + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + *) + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_HAS_POSIX_API) +]) diff --git a/aclocal/enable-rdbg.m4 b/aclocal/enable-rdbg.m4 new file mode 100644 index 0000000000..b3dc42f471 --- /dev/null +++ b/aclocal/enable-rdbg.m4 @@ -0,0 +1,12 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_RDBG, +[ +AC_ARG_ENABLE(rdbg, +[ --enable-rdbg enable remote debugger], +[case "${enableval}" in + yes) RTEMS_HAS_RDBG=yes ;; + no) RTEMS_HAS_RDBG=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-rdbg option) ;; +esac],[RTEMS_HAS_RDBG=no]) +]) diff --git a/aclocal/enable-tests.m4 b/aclocal/enable-tests.m4 new file mode 100644 index 0000000000..106c00f309 --- /dev/null +++ b/aclocal/enable-tests.m4 @@ -0,0 +1,15 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_TESTS, +[ +# If the tests are enabled, then find all the test suite Makefiles +AC_MSG_CHECKING([if the test suites are enabled? ]) +tests_enabled=yes +AC_ARG_ENABLE(tests, +[ --enable-tests enable tests (default:disabled)], + [case "${enableval}" in + yes) AC_MSG_RESULT(yes) ;; + no) AC_MSG_RESULT(no) ; tests_enabled=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for tests option) ;; + esac], AC_MSG_RESULT(no)) +]) diff --git a/aclocal/rtems-top.m4 b/aclocal/rtems-top.m4 new file mode 100644 index 0000000000..3c12b1a0a8 --- /dev/null +++ b/aclocal/rtems-top.m4 @@ -0,0 +1,13 @@ +dnl $Id$ + +AC_DEFUN(RTEMS_TOP, +[dnl +RTEMS_TOPdir="$1"; +AC_SUBST(RTEMS_TOPdir) + +PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; +AC_SUBST(RTEMS_ROOT) +])dnl diff --git a/aclocal/tool-paths.m4 b/aclocal/tool-paths.m4 new file mode 100644 index 0000000000..b6a7f5500d --- /dev/null +++ b/aclocal/tool-paths.m4 @@ -0,0 +1,16 @@ +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) +]) diff --git a/configure b/configure index 7633ba9e53..885021a527 100644 --- a/configure +++ b/configure @@ -35,7 +35,7 @@ # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -127,6 +127,7 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 @@ -410,7 +411,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -580,9 +581,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -598,7 +601,7 @@ fi echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:602: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:605: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -666,33 +669,33 @@ esac # Make sure we can run config.sub. -if $ac_config_sub sun4 >/dev/null 2>&1; then : +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:675: checking host system type" >&5 +echo "configure:678: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) - if host_alias=`$ac_config_guess`; then : + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac -host=`$ac_config_sub $host_alias` +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:696: checking target system type" >&5 +echo "configure:699: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -703,14 +706,14 @@ NONE) esac ;; esac -target=`$ac_config_sub $target_alias` +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:714: checking build system type" >&5 +echo "configure:717: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -721,7 +724,7 @@ NONE) esac ;; esac -build=`$ac_config_sub $build_alias` +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` @@ -891,7 +894,7 @@ RTEMS_PREFIX=${target_cpu}-${target_vendor} # Extract the first word of "cat", so it can be a program name with args. set dummy cat; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:895: checking for $ac_word" >&5 +echo "configure:898: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CAT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -899,9 +902,13 @@ else /*) ac_cv_path_CAT="$CAT" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CAT="$CAT" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CAT="$ac_dir/$ac_word" @@ -922,7 +929,7 @@ fi # Extract the first word of "rm", so it can be a program name with args. set dummy rm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:933: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -930,9 +937,13 @@ else /*) ac_cv_path_RM="$RM" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_RM="$RM" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_RM="$ac_dir/$ac_word" @@ -953,7 +964,7 @@ fi # Extract the first word of "cp", so it can be a program name with args. set dummy cp; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:957: checking for $ac_word" >&5 +echo "configure:968: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -961,9 +972,13 @@ else /*) ac_cv_path_CP="$CP" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CP="$CP" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CP="$ac_dir/$ac_word" @@ -984,7 +999,7 @@ fi # Extract the first word of "mv", so it can be a program name with args. set dummy mv; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:988: checking for $ac_word" >&5 +echo "configure:1003: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -992,9 +1007,13 @@ else /*) ac_cv_path_MV="$MV" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_MV="$MV" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_MV="$ac_dir/$ac_word" @@ -1015,7 +1034,7 @@ fi # Extract the first word of "ln", so it can be a program name with args. set dummy ln; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1019: checking for $ac_word" >&5 +echo "configure:1038: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1023,9 +1042,13 @@ else /*) ac_cv_path_LN="$LN" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_LN="$LN" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_LN="$ac_dir/$ac_word" @@ -1044,7 +1067,7 @@ else fi echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1048: checking whether ln -s works" >&5 +echo "configure:1071: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1067,7 +1090,7 @@ fi # Extract the first word of "chmod", so it can be a program name with args. set dummy chmod; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1071: checking for $ac_word" >&5 +echo "configure:1094: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CHMOD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1075,9 +1098,13 @@ else /*) ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CHMOD="$ac_dir/$ac_word" @@ -1098,7 +1125,7 @@ fi # Extract the first word of "sort", so it can be a program name with args. set dummy sort; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1102: checking for $ac_word" >&5 +echo "configure:1129: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SORT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1106,9 +1133,13 @@ else /*) ac_cv_path_SORT="$SORT" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_SORT="$SORT" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_SORT="$ac_dir/$ac_word" @@ -1133,28 +1164,30 @@ fi # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1141: checking for a BSD compatible install" >&5 +echo "configure:1173: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. : else ac_cv_path_install="$ac_dir/$ac_prog -c" @@ -1184,12 +1217,15 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1193: checking for $ac_word" >&5 +echo "configure:1229: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1197,9 +1233,13 @@ else /*) ac_cv_path_PERL="$PERL" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_PERL="$ac_dir/$ac_word" @@ -1223,10 +1263,11 @@ echo "configure: warning: *** Note: Some tools will not be built." 1>&2 fi + # Extract the first word of "mkdir", so it can be a program name with args. set dummy mkdir; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1230: checking for $ac_word" >&5 +echo "configure:1271: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MKDIR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1234,9 +1275,13 @@ else /*) ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_MKDIR="$ac_dir/$ac_word" @@ -1258,7 +1303,7 @@ fi echo $ac_n "checking for working $MKDIR -m 0755""... $ac_c" 1>&6 -echo "configure:1262: checking for working $MKDIR -m 0755" >&5 +echo "configure:1307: checking for working $MKDIR -m 0755" >&5 if eval "test \"`echo '$''{'rtems_cv_prog_MKDIR_P'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1275,7 +1320,7 @@ echo "$ac_t""$rtems_cv_prog_MKDIR_M" 1>&6 echo $ac_n "checking for working $MKDIR -p""... $ac_c" 1>&6 -echo "configure:1279: checking for working $MKDIR -p" >&5 +echo "configure:1324: checking for working $MKDIR -p" >&5 if eval "test \"`echo '$''{'rtems_cv_prog_mkdir_p'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1295,7 +1340,7 @@ test "$rtems_cv_prog_MKDIR_P" = "yes" && MKDIR="$MKDIR -p" # Extract the first word of "touch", so it can be a program name with args. set dummy touch; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1299: checking for $ac_word" >&5 +echo "configure:1344: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_TOUCH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1303,9 +1348,13 @@ else /*) ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_TOUCH="$ac_dir/$ac_word" @@ -1326,7 +1375,7 @@ fi # Extract the first word of "cmp", so it can be a program name with args. set dummy cmp; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1330: checking for $ac_word" >&5 +echo "configure:1379: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1334,9 +1383,13 @@ else /*) ac_cv_path_CMP="$CMP" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CMP="$CMP" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CMP="$ac_dir/$ac_word" @@ -1358,7 +1411,7 @@ fi # Extract the first word of "sed", so it can be a program name with args. set dummy sed; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1362: checking for $ac_word" >&5 +echo "configure:1415: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1366,9 +1419,13 @@ else /*) ac_cv_path_SED="$SED" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_SED="$SED" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_SED="$ac_dir/$ac_word" @@ -1391,7 +1448,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1395: checking for $ac_word" >&5 +echo "configure:1452: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_M4'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1399,9 +1456,13 @@ else /*) ac_cv_path_M4="$M4" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_M4="$M4" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_M4="$ac_dir/$ac_word" @@ -1423,12 +1484,13 @@ test -n "$M4" && break done + for ac_prog in bash ksh sh do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1432: checking for $ac_word" >&5 +echo "configure:1494: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1436,9 +1498,13 @@ else /*) ac_cv_path_KSH="$KSH" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_KSH="$KSH" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_KSH="$ac_dir/$ac_word" @@ -1459,7 +1525,6 @@ fi test -n "$KSH" && break done - if test -z "$KSH"; then { echo "configure: error: *** Cannot determine a usable shell bash/ksh/sh @@ -1469,50 +1534,70 @@ fi + RTEMS_HOST=$host_os + + +echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 +echo "configure:1544: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) target_cpu=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + target_cpu=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + target_cpu=unix + ;; + no_cpu-*rtems*) + target_cpu=no_cpu + ;; + ppc*-*rtems*) + target_cpu=powerpc + ;; + sparc-sun-solaris*) # unix "simulator" port + target_cpu=unix + ;; + *) + target_cpu=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +echo "$ac_t""$target_cpu" 1>&6 + + +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) rtems_bsp="go32 go32_p5" skip_startfiles="yes" RTEMS_HAS_POSIX_API=no ;; i[3456]86-pc-linux*) # unix "simulator" port - target_cpu=unix RTEMS_HOST=Linux # override these settings RTEMS_HAS_POSIX_API=no ;; i[3456]86-*freebsd2*) # unix "simulator" port - target_cpu=unix RTEMS_HOST=FreeBSD # override these settings RTEMS_HAS_POSIX_API=no ;; no_cpu-*rtems*) - target_cpu=no_cpu RTEMS_HAS_POSIX_API=no ;; - ppc*-*rtems*) - target_cpu=powerpc - ;; sparc-sun-solaris*) # unix "simulator" port - target_cpu=unix RTEMS_HOST=Solaris # override these settings RTEMS_HAS_POSIX_API=no ;; *) - echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:1510: checking rtems target cpu" >&5 -target_cpu=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` -echo "$ac_t""$target_cpu" 1>&6 - ;; esac + # Override the set of BSPs to be built. # Check whether --enable-rtemsbsp or --disable-rtemsbsp was given. if test "${enable_rtemsbsp+set}" = set; then @@ -1525,7 +1610,7 @@ fi # Is this a supported CPU? echo $ac_n "checking if cpu $target_cpu is supported""... $ac_c" 1>&6 -echo "configure:1529: checking if cpu $target_cpu is supported" >&5 +echo "configure:1614: checking if cpu $target_cpu is supported" >&5 if test -d "$srcdir/c/src/exec/score/cpu/$target_cpu"; then echo "$ac_t""yes" 1>&6 else @@ -1549,7 +1634,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1553: checking for $ac_word" >&5 +echo "configure:1638: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1557,9 +1642,13 @@ else /*) ac_cv_path_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CC_FOR_TARGET="$ac_dir/$ac_word" @@ -1589,21 +1678,23 @@ rtems_save_CFLAGS=$CFLAGS CC=$CC_FOR_TARGET echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1593: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1682: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 1693 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1617,18 +1708,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1627: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1724: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1632: checking whether we are using GNU C" >&5 +echo "configure:1729: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1637,7 +1734,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1641: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1738: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1652,7 +1749,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1656: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1753: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1694,7 +1791,7 @@ unset ac_cv_prog_cc_cross echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6 -echo "configure:1698: checking whether $CC_FOR_TARGET accepts -specs" >&5 +echo "configure:1795: checking whether $CC_FOR_TARGET accepts -specs" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1715,7 +1812,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6 -echo "configure:1719: checking whether $CC_FOR_TARGET accepts --pipe" >&5 +echo "configure:1816: checking whether $CC_FOR_TARGET accepts --pipe" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1756,7 +1853,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1760: checking for $ac_word" >&5 +echo "configure:1857: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1764,9 +1861,13 @@ else /*) ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_CXX_FOR_TARGET="$ac_dir/$ac_word" @@ -1796,21 +1897,23 @@ rtems_save_CXXFLAGS=$CXXFLAGS CXX=$CXX_FOR_TARGET echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1800: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:1901: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 1912 "configure" #include "confdefs.h" -main(){return(0);} + +int main(){return(0);} EOF -if { (eval echo configure:1814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1828,7 +1931,7 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 @@ -1836,12 +1939,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1840: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1943: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1845: checking whether we are using GNU C++" >&5 +echo "configure:1948: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1850,7 +1953,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1865,7 +1968,7 @@ if test $ac_cv_prog_gxx = yes; then ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1869: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1972: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1919,7 +2022,7 @@ fi echo $ac_n "checking target's ar""... $ac_c" 1>&6 -echo "configure:1923: checking target's ar" >&5 +echo "configure:2026: checking target's ar" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1952,7 +2055,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1956: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 +echo "configure:2059: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 case "$AR_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1969,7 +2072,7 @@ echo "configure:1956: checking whether environment variable AR_FOR_TARGET is an # Extract the first word of ""$program_prefix"ar", so it can be a program name with args. set dummy "$program_prefix"ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1973: checking for $ac_word" >&5 +echo "configure:2076: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1977,9 +2080,13 @@ else /*) ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_AR_FOR_TARGET="$ac_dir/$ac_word" @@ -2002,7 +2109,7 @@ fi echo $ac_n "checking target's as""... $ac_c" 1>&6 -echo "configure:2006: checking target's as" >&5 +echo "configure:2113: checking target's as" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2035,7 +2142,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2039: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 +echo "configure:2146: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 case "$AS_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2052,7 +2159,7 @@ echo "configure:2039: checking whether environment variable AS_FOR_TARGET is an # Extract the first word of ""$program_prefix"as", so it can be a program name with args. set dummy "$program_prefix"as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2056: checking for $ac_word" >&5 +echo "configure:2163: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2060,9 +2167,13 @@ else /*) ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_AS_FOR_TARGET="$ac_dir/$ac_word" @@ -2085,7 +2196,7 @@ fi echo $ac_n "checking target's ld""... $ac_c" 1>&6 -echo "configure:2089: checking target's ld" >&5 +echo "configure:2200: checking target's ld" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2118,7 +2229,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2122: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 +echo "configure:2233: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 case "$LD_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2135,7 +2246,7 @@ echo "configure:2122: checking whether environment variable LD_FOR_TARGET is an # Extract the first word of ""$program_prefix"ld", so it can be a program name with args. set dummy "$program_prefix"ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2139: checking for $ac_word" >&5 +echo "configure:2250: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2143,9 +2254,13 @@ else /*) ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_LD_FOR_TARGET="$ac_dir/$ac_word" @@ -2168,7 +2283,7 @@ fi echo $ac_n "checking target's nm""... $ac_c" 1>&6 -echo "configure:2172: checking target's nm" >&5 +echo "configure:2287: checking target's nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2201,7 +2316,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2205: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 +echo "configure:2320: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 case "$NM_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2218,7 +2333,7 @@ echo "configure:2205: checking whether environment variable NM_FOR_TARGET is an # Extract the first word of ""$program_prefix"nm", so it can be a program name with args. set dummy "$program_prefix"nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2222: checking for $ac_word" >&5 +echo "configure:2337: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2226,9 +2341,13 @@ else /*) ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_NM_FOR_TARGET="$ac_dir/$ac_word" @@ -2252,7 +2371,7 @@ fi echo $ac_n "checking target's ranlib""... $ac_c" 1>&6 -echo "configure:2256: checking target's ranlib" >&5 +echo "configure:2375: checking target's ranlib" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2285,7 +2404,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2289: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 +echo "configure:2408: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 case "$RANLIB_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2302,7 +2421,7 @@ echo "configure:2289: checking whether environment variable RANLIB_FOR_TARGET is # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args. set dummy "$program_prefix"ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2306: checking for $ac_word" >&5 +echo "configure:2425: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2310,9 +2429,13 @@ else /*) ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_RANLIB_FOR_TARGET="$ac_dir/$ac_word" @@ -2337,7 +2460,7 @@ fi # ranlib wasn't found; check if ar -s is available echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6 -echo "configure:2341: checking whether $AR_FOR_TARGET -s works" >&5 +echo "configure:2464: checking whether $AR_FOR_TARGET -s works" >&5 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2346,8 +2469,8 @@ cat > conftest.$ac_ext <&5; (eval $ac_try) 2>&5; }; } \ - && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ +if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2473: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ + && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ && test -s conftest.a ; \ then rtems_cv_AR_FOR_TARGET_S="yes" @@ -2372,7 +2495,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6 -echo "configure:2376: checking target's objcopy" >&5 +echo "configure:2499: checking target's objcopy" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2405,7 +2528,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2409: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 +echo "configure:2532: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 case "$OBJCOPY_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2422,7 +2545,7 @@ echo "configure:2409: checking whether environment variable OBJCOPY_FOR_TARGET i # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args. set dummy "$program_prefix"objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2426: checking for $ac_word" >&5 +echo "configure:2549: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2430,9 +2553,13 @@ else /*) ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_OBJCOPY_FOR_TARGET="$ac_dir/$ac_word" @@ -2455,7 +2582,7 @@ fi echo $ac_n "checking target's size""... $ac_c" 1>&6 -echo "configure:2459: checking target's size" >&5 +echo "configure:2586: checking target's size" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2488,7 +2615,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2492: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 +echo "configure:2619: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 case "$SIZE_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2505,7 +2632,7 @@ echo "configure:2492: checking whether environment variable SIZE_FOR_TARGET is a # Extract the first word of ""$program_prefix"size", so it can be a program name with args. set dummy "$program_prefix"size; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2509: checking for $ac_word" >&5 +echo "configure:2636: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2513,9 +2640,13 @@ else /*) ac_cv_path_SIZE_FOR_TARGET="$SIZE_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_SIZE_FOR_TARGET="$SIZE_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_SIZE_FOR_TARGET="$ac_dir/$ac_word" @@ -2538,7 +2669,7 @@ fi echo $ac_n "checking target's strip""... $ac_c" 1>&6 -echo "configure:2542: checking target's strip" >&5 +echo "configure:2673: checking target's strip" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2571,7 +2702,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2575: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 +echo "configure:2706: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 case "$STRIP_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2588,7 +2719,7 @@ echo "configure:2575: checking whether environment variable STRIP_FOR_TARGET is # Extract the first word of ""$program_prefix"strip", so it can be a program name with args. set dummy "$program_prefix"strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2592: checking for $ac_word" >&5 +echo "configure:2723: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2596,9 +2727,13 @@ else /*) ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path. ;; + ?:/*) + ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a dos path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_STRIP_FOR_TARGET="$ac_dir/$ac_word" @@ -2623,7 +2758,7 @@ fi if test "${target_cpu}" = "i386"; then echo $ac_n "checking for 16 bit mode assembler support""... $ac_c" 1>&6 -echo "configure:2627: checking for 16 bit mode assembler support" >&5 +echo "configure:2762: checking for 16 bit mode assembler support" >&5 if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2633,7 +2768,7 @@ else addr32 lgdt 0 EOF - if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then + if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then rtems_cv_prog_gas_code16=yes else rtems_cv_prog_gas_code16=no @@ -2648,15 +2783,16 @@ echo "$ac_t""$rtems_cv_prog_gas_code16" 1>&6 # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2652: checking for $ac_word" >&5 +echo "configure:2787: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -2677,16 +2813,17 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2681: checking for $ac_word" >&5 +echo "configure:2817: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -2721,25 +2858,61 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2868: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2729: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2900: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 2911 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:2743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2753,18 +2926,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2763: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2942: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2768: checking whether we are using GNU C" >&5 +echo "configure:2947: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2773,7 +2952,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2777: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2784,11 +2963,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2792: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:2975: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2803,33 +2986,37 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 -echo "configure:2821: checking for Cygwin32 environment" >&5 +echo "configure:3008: checking for Cygwin32 environment" >&5 if eval "test \"`echo '$''{'rtems_cv_cygwin32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3020: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* rtems_cv_cygwin32=yes else @@ -2847,7 +3034,7 @@ CYGWIN32= test "$rtems_cv_cygwin32" = yes && CYGWIN32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:2851: checking for executable suffix" >&5 +echo "configure:3038: checking for executable suffix" >&5 if eval "test \"`echo '$''{'rtems_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2888,12 +3075,12 @@ test "$ac_cv_prog_cc_g" = "yes" && CC_CFLAGS_DEBUG_V=${CC_CFLAGS_DEBUG_V-"-g"} for ac_func in strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2892: checking for $ac_func" >&5 +echo "configure:3079: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2945,7 +3132,7 @@ if test "$target_cpu" = "unix" ; then echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6 -echo "configure:2949: checking whether $RTEMS_HOST supports System V semaphores" >&5 +echo "configure:3136: checking whether $RTEMS_HOST supports System V semaphores" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2954,7 +3141,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -2980,7 +3167,7 @@ int main () { } EOF -if { (eval echo configure:2984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_sem="yes" else @@ -3003,7 +3190,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6 echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6 -echo "configure:3007: checking whether $RTEMS_HOST supports System V shared memory" >&5 +echo "configure:3194: checking whether $RTEMS_HOST supports System V shared memory" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3012,7 +3199,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -3028,7 +3215,7 @@ int main () { } EOF -if { (eval echo configure:3032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_shm="yes" else @@ -3051,7 +3238,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6 echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6 -echo "configure:3055: checking whether $RTEMS_HOST supports System V messages" >&5 +echo "configure:3242: checking whether $RTEMS_HOST supports System V messages" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3060,7 +3247,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -3076,7 +3263,7 @@ int main () { } EOF -if { (eval echo configure:3080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_msg="yes" else @@ -3101,7 +3288,7 @@ fi # find all the Executive Makefiles echo $ac_n "checking for Makefile.in in c/src/exec/score/tools/$target_cpu""... $ac_c" 1>&6 -echo "configure:3105: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5 +echo "configure:3292: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5 if test -d $srcdir/c/src/exec/score/tools/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3116,7 +3303,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/exec/rtems""... $ac_c" 1>&6 -echo "configure:3120: checking for Makefile.in in c/src/exec/rtems" >&5 +echo "configure:3307: checking for Makefile.in in c/src/exec/rtems" >&5 if test -d $srcdir/c/src/exec/rtems; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3131,7 +3318,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/exec/sapi""... $ac_c" 1>&6 -echo "configure:3135: checking for Makefile.in in c/src/exec/sapi" >&5 +echo "configure:3322: checking for Makefile.in in c/src/exec/sapi" >&5 if test -d $srcdir/c/src/exec/sapi; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3146,7 +3333,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/exec/score/cpu/$target_cpu""... $ac_c" 1>&6 -echo "configure:3150: checking for Makefile.in in c/src/exec/score/cpu/$target_cpu" >&5 +echo "configure:3337: checking for Makefile.in in c/src/exec/score/cpu/$target_cpu" >&5 if test -d $srcdir/c/src/exec/score/cpu/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3163,7 +3350,7 @@ fi if test "$RTEMS_HAS_POSIX_API" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/exec/posix""... $ac_c" 1>&6 -echo "configure:3167: checking for Makefile.in in c/src/exec/posix" >&5 +echo "configure:3354: checking for Makefile.in in c/src/exec/posix" >&5 if test -d $srcdir/c/src/exec/posix; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3185,7 +3372,7 @@ if test -d "$srcdir/c/src/lib/libbsp/$target_cpu"; then if test -z "$rtems_bsp"; then echo $ac_n "checking for bsps""... $ac_c" 1>&6 -echo "configure:3189: checking for bsps" >&5 +echo "configure:3376: checking for bsps" >&5 files=`ls $srcdir/c/src/lib/libbsp/$target_cpu` for file in $files; do case $file in @@ -3250,7 +3437,7 @@ echo "configure:3189: checking for bsps" >&5 bspdirs="$bspdirs $bspdir" echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir""... $ac_c" 1>&6 -echo "configure:3254: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5 +echo "configure:3441: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5 if test -d $srcdir/c/src/lib/libbsp/$bspcpudir$bspdir; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3265,7 +3452,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared""... $ac_c" 1>&6 -echo "configure:3269: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5 +echo "configure:3456: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5 if test -d $srcdir/c/src/lib/libbsp/${bspcpudir}shared; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3288,7 +3475,7 @@ fi # find all the CPU dependent library Makefiles echo $ac_n "checking for Makefile.in in c/src/lib/libcpu/$target_cpu""... $ac_c" 1>&6 -echo "configure:3292: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5 +echo "configure:3479: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5 if test -d $srcdir/c/src/lib/libcpu/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3305,7 +3492,7 @@ fi if test "$skip_startfiles" != "yes"; then echo $ac_n "checking for Makefile.in in c/src/lib/start/$target_cpu""... $ac_c" 1>&6 -echo "configure:3309: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5 +echo "configure:3496: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5 if test -d $srcdir/c/src/lib/start/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3337,12 +3524,12 @@ fi # If the TCP/IP stack is enabled, then find all TCP/IP Makefiles echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6 -echo "configure:3341: checking if networking is enabled? " >&5 +echo "configure:3528: checking if networking is enabled? " >&5 echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6 if test "$RTEMS_HAS_NETWORKING" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/lib/libnetworking""... $ac_c" 1>&6 -echo "configure:3346: checking for Makefile.in in c/src/lib/libnetworking" >&5 +echo "configure:3533: checking for Makefile.in in c/src/lib/libnetworking" >&5 if test -d $srcdir/c/src/lib/libnetworking; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3357,7 +3544,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/librpc""... $ac_c" 1>&6 -echo "configure:3361: checking for Makefile.in in c/src/lib/librpc" >&5 +echo "configure:3548: checking for Makefile.in in c/src/lib/librpc" >&5 if test -d $srcdir/c/src/lib/librpc; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3373,7 +3560,7 @@ fi if test "$RTEMS_HAS_RDBG" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/lib/librdbg""... $ac_c" 1>&6 -echo "configure:3377: checking for Makefile.in in c/src/lib/librdbg" >&5 +echo "configure:3564: checking for Makefile.in in c/src/lib/librdbg" >&5 if test -d $srcdir/c/src/lib/librdbg; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3396,7 +3583,7 @@ fi # If the tests are enabled, then find all the test suite Makefiles echo $ac_n "checking if the test suites are enabled? ""... $ac_c" 1>&6 -echo "configure:3400: checking if the test suites are enabled? " >&5 +echo "configure:3587: checking if the test suites are enabled? " >&5 tests_enabled=no # Check whether --enable-tests or --disable-tests was given. if test "${enable_tests+set}" = set; then @@ -3415,7 +3602,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/tools/$target_cpu""... $ac_c" 1>&6 -echo "configure:3419: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5 +echo "configure:3606: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5 if test -d $srcdir/c/src/tests/tools/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3432,7 +3619,7 @@ fi if test "$tests_enabled" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/tests/libtests""... $ac_c" 1>&6 -echo "configure:3436: checking for Makefile.in in c/src/tests/libtests" >&5 +echo "configure:3623: checking for Makefile.in in c/src/tests/libtests" >&5 if test -d $srcdir/c/src/tests/libtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3447,7 +3634,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/sptests""... $ac_c" 1>&6 -echo "configure:3451: checking for Makefile.in in c/src/tests/sptests" >&5 +echo "configure:3638: checking for Makefile.in in c/src/tests/sptests" >&5 if test -d $srcdir/c/src/tests/sptests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3462,7 +3649,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/tmtests""... $ac_c" 1>&6 -echo "configure:3466: checking for Makefile.in in c/src/tests/tmtests" >&5 +echo "configure:3653: checking for Makefile.in in c/src/tests/tmtests" >&5 if test -d $srcdir/c/src/tests/tmtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3478,7 +3665,7 @@ fi if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/tests/mptests""... $ac_c" 1>&6 -echo "configure:3482: checking for Makefile.in in c/src/tests/mptests" >&5 +echo "configure:3669: checking for Makefile.in in c/src/tests/mptests" >&5 if test -d $srcdir/c/src/tests/mptests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3495,7 +3682,7 @@ fi if test "$RTEMS_HAS_POSIX_API" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/tests/psxtests""... $ac_c" 1>&6 -echo "configure:3499: checking for Makefile.in in c/src/tests/psxtests" >&5 +echo "configure:3686: checking for Makefile.in in c/src/tests/psxtests" >&5 if test -d $srcdir/c/src/tests/psxtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3513,7 +3700,7 @@ fi # If the HWAPI is enabled, the find the HWAPI Makefiles echo $ac_n "checking if the HWAPI is enabled? ""... $ac_c" 1>&6 -echo "configure:3517: checking if the HWAPI is enabled? " >&5 +echo "configure:3704: checking if the HWAPI is enabled? " >&5 # Check whether --enable-hwapi or --disable-hwapi was given. if test "${enable_hwapi+set}" = set; then enableval="$enable_hwapi" @@ -3524,7 +3711,7 @@ if test "${enable_hwapi+set}" = set; then makefiles="$makefiles c/src/lib/libhwapi/Makefile" echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/analog""... $ac_c" 1>&6 -echo "configure:3528: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5 +echo "configure:3715: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5 if test -d $srcdir/c/src/lib/libhwapi/analog; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3539,7 +3726,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/discrete""... $ac_c" 1>&6 -echo "configure:3543: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5 +echo "configure:3730: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5 if test -d $srcdir/c/src/lib/libhwapi/discrete; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3554,7 +3741,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/drivers""... $ac_c" 1>&6 -echo "configure:3558: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5 +echo "configure:3745: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5 if test -d $srcdir/c/src/lib/libhwapi/drivers; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3569,7 +3756,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory""... $ac_c" 1>&6 -echo "configure:3573: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5 +echo "configure:3760: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5 if test -d $srcdir/c/src/lib/libhwapi/non_volatile_memory; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3584,7 +3771,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/serial""... $ac_c" 1>&6 -echo "configure:3588: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5 +echo "configure:3775: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5 if test -d $srcdir/c/src/lib/libhwapi/serial; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3599,7 +3786,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/support""... $ac_c" 1>&6 -echo "configure:3603: checking for Makefile.in in c/src/lib/libhwapi/support" >&5 +echo "configure:3790: checking for Makefile.in in c/src/lib/libhwapi/support" >&5 if test -d $srcdir/c/src/lib/libhwapi/support; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3614,7 +3801,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/wrapup""... $ac_c" 1>&6 -echo "configure:3618: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5 +echo "configure:3805: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5 if test -d $srcdir/c/src/lib/libhwapi/wrapup; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3665,7 +3852,7 @@ fi # pick up all the Makefiles in required parts of the tree echo $ac_n "checking for Makefile.in in c/build-tools""... $ac_c" 1>&6 -echo "configure:3669: checking for Makefile.in in c/build-tools" >&5 +echo "configure:3856: checking for Makefile.in in c/build-tools" >&5 if test -d $srcdir/c/build-tools; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3680,7 +3867,7 @@ fi echo $ac_n "checking for Makefile.in in make""... $ac_c" 1>&6 -echo "configure:3684: checking for Makefile.in in make" >&5 +echo "configure:3871: checking for Makefile.in in make" >&5 if test -d $srcdir/make; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3695,7 +3882,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libchip""... $ac_c" 1>&6 -echo "configure:3699: checking for Makefile.in in c/src/lib/libchip" >&5 +echo "configure:3886: checking for Makefile.in in c/src/lib/libchip" >&5 if test -d $srcdir/c/src/lib/libchip; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3710,7 +3897,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libmisc""... $ac_c" 1>&6 -echo "configure:3714: checking for Makefile.in in c/src/lib/libmisc" >&5 +echo "configure:3901: checking for Makefile.in in c/src/lib/libmisc" >&5 if test -d $srcdir/c/src/lib/libmisc; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3725,7 +3912,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/samples""... $ac_c" 1>&6 -echo "configure:3729: checking for Makefile.in in c/src/tests/samples" >&5 +echo "configure:3916: checking for Makefile.in in c/src/tests/samples" >&5 if test -d $srcdir/c/src/tests/samples; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3765,7 +3952,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3832,7 +4019,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3890,9 +4077,11 @@ sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF $ac_vpsub $extrasub +s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3936,6 +4125,7 @@ s%@LN_S@%$LN_S%g s%@CHMOD@%$CHMOD%g s%@SORT@%$SORT%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PERL@%$PERL%g s%@MKDIR@%$MKDIR%g -- cgit v1.2.3