From 61a69a567c4ab2a1b36eaec9019df91d641b8486 Mon Sep 17 00:00:00 2001 From: Ralf Corsepius Date: Fri, 16 Oct 2009 14:15:29 +0000 Subject: Remove (Abandoned). --- c/src/lib/libbsp/bare/.cvsignore | 8 -- c/src/lib/libbsp/bare/ChangeLog | 219 ------------------------------- c/src/lib/libbsp/bare/Makefile.am | 22 ---- c/src/lib/libbsp/bare/README | 117 ----------------- c/src/lib/libbsp/bare/bsp_specs | 11 -- c/src/lib/libbsp/bare/build-tools | 71 ---------- c/src/lib/libbsp/bare/configure.ac | 21 --- c/src/lib/libbsp/bare/do-bare-bsp-build | 177 ------------------------- c/src/lib/libbsp/bare/include/.cvsignore | 5 - c/src/lib/libbsp/bare/include/bsp.h | 43 ------ c/src/lib/libbsp/bare/preinstall.am | 45 ------- 11 files changed, 739 deletions(-) delete mode 100644 c/src/lib/libbsp/bare/.cvsignore delete mode 100644 c/src/lib/libbsp/bare/ChangeLog delete mode 100644 c/src/lib/libbsp/bare/Makefile.am delete mode 100644 c/src/lib/libbsp/bare/README delete mode 100644 c/src/lib/libbsp/bare/bsp_specs delete mode 100644 c/src/lib/libbsp/bare/build-tools delete mode 100644 c/src/lib/libbsp/bare/configure.ac delete mode 100644 c/src/lib/libbsp/bare/do-bare-bsp-build delete mode 100644 c/src/lib/libbsp/bare/include/.cvsignore delete mode 100644 c/src/lib/libbsp/bare/include/bsp.h delete mode 100644 c/src/lib/libbsp/bare/preinstall.am diff --git a/c/src/lib/libbsp/bare/.cvsignore b/c/src/lib/libbsp/bare/.cvsignore deleted file mode 100644 index baba64eafa..0000000000 --- a/c/src/lib/libbsp/bare/.cvsignore +++ /dev/null @@ -1,8 +0,0 @@ -aclocal.m4 -autom4te*.cache -config.cache -config.log -config.status -configure -Makefile -Makefile.in diff --git a/c/src/lib/libbsp/bare/ChangeLog b/c/src/lib/libbsp/bare/ChangeLog deleted file mode 100644 index 094e8cc877..0000000000 --- a/c/src/lib/libbsp/bare/ChangeLog +++ /dev/null @@ -1,219 +0,0 @@ -2008-12-04 Joel Sherrill - - * bsp_specs: Move -e start from *link to *startfile to avoid warning - for undefined entry symbol when linking relocatables with binutils - 2.19. - -2008-10-02 Joel Sherrill - - * Makefile.am, preinstall.am: Use shared tm27.h stub. - * include/tm27.h: Removed. - -2008-09-29 Ralf Corsépius - - * Makefile.am: Cleanup. - -2008-09-18 Joel Sherrill - - * include/bsp.h: Remove unnecessary boilerplate comments. - -2008-09-18 Joel Sherrill - - * include/bsp.h: Eliminate definitions of BSP_LIBIO_MAX_FDS since this - is NOT used anywhere. - -2007-12-11 Joel Sherrill - - * include/bsp.h: Eliminate copies of the Configuration Table. Use the - RTEMS provided accessor macros to obtain configuration fields. - -2007-12-04 Joel Sherrill - - * include/bsp.h: Move interrupt_stack_size field from CPU Table to - Configuration Table. Eliminate CPU Table from all ports. Delete - references to CPU Table in all forms. - -2007-04-12 Ralf Corsépius - - * bsp_specs: Remove "*cpp:". Remove qrtems_debug. - -2007-03-10 Joel Sherrill - - PR 1227/bsps - * include/bsp.h: Remove MAX_LONG_TEST_DURATION and - MAX_SHORT_TEST_DURATION. They are obsolete and unused. - -2007-01-26 Ralf Corsépius - - * Makefile.am: Use MKDIR_P instead of mkdir_p. - -2006-12-02 Ralf Corsépius - - * configure.ac: New BUG-REPORT address. - -2006-11-15 Ralf Corsépius - - * configure.ac: Use AC_CONFIG_HEADER instead of AM_CONFIG_HEADER. - -2006-10-17 Ralf Corsépius - - * configure.ac: Require autoconf-2.60. Require automake-1.10. - -2005-01-02 Ralf Corsepius - - * Makefile.am: Remove build-variant support. - -2004-10-20 Ralf Corsepius - - * include/bsp.h: Remove tm27 stuff. - * include/tm27.h: New. - * Makefile.am: Add tm27.h - -2004-09-24 Ralf Corsepius - - * configure.ac: Require automake > 1.9. - -2004-04-01 Ralf Corsepius - - * include/bsp.h: Include instead of . - * include/bsp.h: Include instead of . - -2004-02-19 Ralf Corsepius - - * Makefile.am: Reflect changes to bsp.am. - Preinstall dist_project_lib*. - -2004-02-14 Ralf Corsepius - - * Makefile.am: Reflect changes to bsp.am. - -2004-01-21 Ralf Corsepius - - * Makefile.am: Add PREINSTALL_DIRS. - -2003-12-12 Ralf Corsepius - - * configure.ac: Require automake >= 1.8, autoconf >= 2.59. - -2003-12-11 Ralf Corsepius - - * Makefile.am: Misc cleanups and fixes. - -2003-10-22 Ralf Corsepius - - * configure.ac: Remove RTEMS_CANONICAL_HOST. - -2003-10-20 Ralf Corsepius - - * configure.ac: Remove RTEMS_CHECK_CUSTOM_BSP. - -2003-09-29 Ralf Corsepius - - * Makefile.am: Merge-in include/Makefile.am. - Reflect changes to bsp.am. - * include/Makefile.am: Remove. - * configure.ac: Reflect changes above. - -2003-09-04 Joel Sherrill - - * include/bsp.h: URL for license changed. - -2003-08-18 Ralf Corsepius - - * Makefile.am: Reflect having moved aclocal/. - -2003-08-16 Ralf Corsepius - - * Makefile.am: Reflect having moved automake/. - * include/Makefile.am: Reflect having moved automake/. - -2003-08-11 Ralf Corsepius - - * configure.ac: Use rtems-bugs@rtems.com as bug report email address. - -2003-08-06 Ralf Corsepius - - PR 445/bsps - * bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp. - -2003-03-06 Ralf Corsepius - - * configure.ac: Remove AC_CONFIG_AUX_DIR. - -2003-02-11 Ralf Corsepius - - * configure.ac: AM_INIT_AUTOMAKE([1.7.2]). - -2003-02-11 Ralf Corsepius - - * configure.ac: AC_PREREQ(2.57). - -2002-12-06 Ralf Corsepius - - * configure.ac: Remove RTEMS_CHECK_BSP_CACHE. - -2002-10-21 Ralf Corsepius - - * .cvsignore: Reformat. - Add autom4te*cache. - Remove autom4te.cache. - -2002-08-21 Joel Sherrill - - * bsp_specs: Added support for -nostdlibs. - -2002-03-27 Ralf Corsepius - - * configure.ac: - AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS). - AM_INIT_AUTOMAKE([no-define foreign 1.6]). - * include/Makefile.am: Remove AUTOMAKE_OPTIONS. - * Makefile.am: Remove AUTOMAKE_OPTIONS. - -2001-12-22 Ralf Corsepius - - * bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu, - replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g. - -2001-10-11 Ralf Corsepius - - * .cvsignore: Add autom4te.cache for autoconf > 2.52. - * configure.in: Remove. - * configure.ac: New file, generated from configure.in by autoupdate. - -2001-09-27 Joel Sherrill - - * include/bsp.h: Renamed delay() to rtems_bsp_delay(). - -2001-09-23 Ralf Corsepius - - * include/Makefile.am: Use 'CLEANFILES ='. - * include/Makefile.am: Use 'TMPINSTALL_FILES ='. - * include/Makefile.am: fix path to shared/include/coverhd.h. - -2001-05-26 Ralf Corsepius - - * include/bsp.h: Include bspopts.h. - -2001-05-25 Ralf Corsepius - - * configure.in: Add bspopts.h. - * include/.cvsignore: Add bspopts.h*, coverhd.h, stamp-h*. - * include/Makefile.am: Use *_HEADERS instead of *H_FILES. - -2000-11-09 Ralf Corsepius - - * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS. - -2000-11-02 Ralf Corsepius - - * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal. - -2000-10-27 Ralf Corsepius - - * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros. - Switch to GNU canonicalization. - -2000-08-10 Joel Sherrill - - * ChangeLog: New file. diff --git a/c/src/lib/libbsp/bare/Makefile.am b/c/src/lib/libbsp/bare/Makefile.am deleted file mode 100644 index 35bb01e683..0000000000 --- a/c/src/lib/libbsp/bare/Makefile.am +++ /dev/null @@ -1,22 +0,0 @@ -## -## $Id$ -## - -ACLOCAL_AMFLAGS = -I ../../../aclocal - -include $(top_srcdir)/../bsp.am - -dist_project_lib_DATA = bsp_specs - -include_HEADERS = include/bsp.h -include_HEADERS += ../../shared/include/tm27.h - -nodist_include_HEADERS = include/bspopts.h -DISTCLEANFILES = include/bspopts.h - -nodist_include_HEADERS += ../shared/include/coverhd.h - -EXTRA_DIST = build-tools do-bare-bsp-build - -include $(srcdir)/preinstall.am -include $(top_srcdir)/../../../automake/local.am diff --git a/c/src/lib/libbsp/bare/README b/c/src/lib/libbsp/bare/README deleted file mode 100644 index f2d43f974d..0000000000 --- a/c/src/lib/libbsp/bare/README +++ /dev/null @@ -1,117 +0,0 @@ -# -# $Id$ -# - -# -# Please send any comments, improvements, or bug reports to: -# Chris Johns -# Objective Design Systems -# 35 Cairo Street -# Cammeray -# Sydney, NSW 2062 -# ccj@acm.org -# - -# -# Overview -# ~~~~~~~~ -# This board support package is not a board support package at all, but -# a means to build the RTEMS kernel without using a specific BSP. -# -# You should be able to build to build this BSP for any cpu type. -# -# You must provide the standard BSP type functions and support yourself -# externally to RTEMS. -# -# This BSP is intended to be used by people who fit one or more of the -# categories below : -# -# 1) using custom hardware of little use or interest to others. If you -# intend to use hardware available to others, please create a BSP -# and send to OARCorp. -# -# 2) production code cannot depend on software which can change. BSP code -# can change with-out notice, while RTEMS has very tightly defined -# interfaces which do not change. -# -# 3) the need to extend or change an existing BSP in ways which are not -# of interest to others or the BSP maintainer. -# -# I fit all the above. -# -# Issues -# ~~~~~~ -# I do not consider the bare BSP as a starting point for RTEMS. The -# BSP code integrated into the RTEMS build tree has the advantage of -# building all the test and sample code. The sample and test code is -# important for validatation of your tools, and getting your BSP -# working correctly. -# -# Once you gain experience with RTEM and your application matures the -# need to break the BSP code out from the kernel becomes important. It -# is at this point in time that the bare BSP becomes useful. -# -# Once free you are able to upgrade without the worry of makefile or -# build tree changes which can break your BSP. -# -# How To Configure -# ~~~~~~~~~~~~~~~~ -# RTEMS requires you to select a BSP inorder to build the kernel. -# If you take a close look at a BSP which is closest to your -# needs you will find somewhere the CPU model and CPU compile -# flags are specified. This is the only piece of information -# required by the kernel inorder for it to build. -# -# This highlights the clean design of the kernel and its -# independence from the particulars of target hardware. -# -# The CPU model is the RTEMS model and usually tries to match with -# the GCC model. There are variations on some processors. If you are -# unsure please ask on the RTEMS list. Someone will know (I hope). -# -# The CPU flags allow you to select specific operating modes for -# GCC. For example the PowerPC has specific flags to control various -# cache resouces. Another example is the 68000 family of embedded -# processor do not have FPU hardware and require software emulation. -# -# An example configuration command line is: -# -# ../rtems-4.0/configure --target=m68k-rtems \ -# --prefix=/ods/egcs/test \ -# --enable-cxx \ -# --enable-gmake-print-directory \ -# --disable-tests \ -# --disable-posix \ -# --enable-networking \ -# --enable-bare-cpu-cflags=-mcpu32 \ -# --enable-bare-cpu-model=mcpu32 \ -# --enable-rtemsbsp=bare -# -# Building RTEMS -# ~~~~~~~~~~~~~~ -# You are required to do nothing special here. Just follow the documented -# steps. The samples are built but no linking occurs. The link command -# is stubbed out to produce a Unix shell script. -# -# After installation you will find a directory called 'bare'. The nature -# of the RTEMS build system means the bare BSP will only install into the -# the bare directory under the specifed configuration prefix. -# -# I therefore suggest you move the directory to another name. This allows -# you to make and install another bare BSP for a different variant of -# CPU without over writing the last installed variant. -# -# I have provided a script file I use to configure and build RTEMS -# from the arcihve. Take a copy and use it if you find it useful. -# -# Creating an Application. -# ~~~~~~~~~~~~~~~~~~~~~~~~ -# This is something which is usually specific to your local environment. -# The bare BSP does not lock you into any specific makefile or build -# system. A couple of suggestions are: -# -# o Get the sample bare BSP application, or -# o Watch RTEMS build a BSP which is closest to yours and copy -# the command lines used. -# - diff --git a/c/src/lib/libbsp/bare/bsp_specs b/c/src/lib/libbsp/bare/bsp_specs deleted file mode 100644 index ff6e444211..0000000000 --- a/c/src/lib/libbsp/bare/bsp_specs +++ /dev/null @@ -1,11 +0,0 @@ -%rename endfile old_endfile -%rename startfile old_startfile -%rename link old_link - -*startfile: -%{!qrtems: %(old_startfile)} \ -%{!nostdlib: %{qrtems: start.o%s -e start}} - -*link: -%(old_link) %{qrtems: -dc -dp -N} - diff --git a/c/src/lib/libbsp/bare/build-tools b/c/src/lib/libbsp/bare/build-tools deleted file mode 100644 index 8ea01d3933..0000000000 --- a/c/src/lib/libbsp/bare/build-tools +++ /dev/null @@ -1,71 +0,0 @@ -# -# $Id$ -# -# Tools to help doing build scripts. Adapted from Joel's bit -# script. -# - -# -# USERCHANGE - uncomment this if you want to watch the commands. -# -# set -x - -start=`date` - -# -# Common exit routine for this script so we can print the starting -# and ending times. -# - -my_exit() -{ - stop=`date` - - echo - echo "Started: " $start - echo "Finished: " $stop - exit $1 -} - -# -# Handle a fatal error. -# - -fatal_error() -{ - echo "ERROR: $*" >&2 - my_exit 1 -} - -# -# Checks the status returned by executables and exits if it is non-zero. -# - -check_fatal() -{ - if [ $1 -ne 0 ] ; then - shift - fatal_error $* - fi -} - -# -# Test for a valid path, exit if not found -# - -test_path() -{ - test -d $* || fatal_error "cannot find $*" - return 0 -} - -# -# Create a directory and check it was made correctly. -# - -checked_mkdir() -{ - mkdir -p $1 - check_fatal $? "unable to make directory $1" - return 0 -} diff --git a/c/src/lib/libbsp/bare/configure.ac b/c/src/lib/libbsp/bare/configure.ac deleted file mode 100644 index 1a349f9ed2..0000000000 --- a/c/src/lib/libbsp/bare/configure.ac +++ /dev/null @@ -1,21 +0,0 @@ -## Process this file with autoconf to produce a configure script. -## -## $Id$ - -AC_PREREQ(2.60) -AC_INIT([rtems-c-src-lib-libbsp-bare],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla]) -AC_CONFIG_SRCDIR([bsp_specs]) -RTEMS_TOP(../../../../..) - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define foreign 1.10]) -AM_MAINTAINER_MODE - -RTEMS_ENV_RTEMSBSP - -AC_CONFIG_HEADER(include/bspopts.h) -RTEMS_PROJECT_ROOT - -# Explicitly list all Makefiles here -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/c/src/lib/libbsp/bare/do-bare-bsp-build b/c/src/lib/libbsp/bare/do-bare-bsp-build deleted file mode 100644 index 16da69e0fe..0000000000 --- a/c/src/lib/libbsp/bare/do-bare-bsp-build +++ /dev/null @@ -1,177 +0,0 @@ -#!/bin/bash -# -# $Id$ -# -# RTEMS Bare BSP Build Script. -# -# This is designed to allow recording of stdout to log. The log -# forms part of a clean build trace for validation and verification -# reasons. -# - -. `echo $0 | sed -e 's/do-rtems-build/build-tools/'` - -# -# The current versions we are building. -# -# Note: Please change to suite. -# - -RTEMS=rtems-980618 - -# -# The list of processors we want the tools built for. -# - -CPUS="m68k" - -# -# RTEMS CPU target we want to build. -# - -RTEMS_M68K_TARGETS="68000 68030 cpu32" - -# -# The particular host settings we have. -# -# Map particulars for different hosts here. -# - -HOST=`hostname` - -case "${HOST}" in - kiwi*) - ARCHIVE="/ods/archive" - TOOLS="/ods/egcs" - RTEMS_PATH=development/rtems/${RTEMS} - ;; - *) - fatal_error "host is not known." - ;; -esac - -# -# Where will RTEMS live when installed ? -# - -RTEMS_PREFIX=${TOOLS}/test - -echo "Building on ${HOST}, archives in ${ARCHIVE}" - -# -# Who is doing the build. -# - -echo "User profile : "`id` - -# -# Find out where we are -# - -TOPDIR=`pwd` - -echo "Top directory is ${TOPDIR}" - -# -# Test the paths to the archives exist. -# - -test_path ${ARCHIVE}/${RTEMS_PATH} - -# -# Get the RTEMS source and patch. -# - -echo "Unpacking rtems source ${ARCHIVE}/${RTEMS_PATH}/${RTEMS}.tgz ... " -tar zxf ${ARCHIVE}/${RTEMS_PATH}/${RTEMS}.tgz -check_fatal $? "failed to unpack ${RTEMS}.tgz." - -# -# Build all the processors we support. -# - -for cpu in ${CPUS}; do -{ - # - # Create the target. - # - - TARGET=${cpu}-rtems - - # - # On to RTEMS. - # - - case ${cpu} in - m68k) - RTEMS_TARGETS=${RTEMS_M68K_TARGETS} - ;; - *) - fatal_error "unknown cpu ${cpu}" - ;; - esac - - for rtems_target in ${RTEMS_TARGETS}; do - { - # - # Remove the target if found. - # - - echo "Removing the RTEMS bare bsp directory rtems-bare-${rtems_target} ... " - rm -rf rtems-bare-${rtems_target} - check_fatal $? "failed to remove rtems-bare-${rtems_target}." - - echo "Creating the RTEM build directory for target ${rtems_target} ... " - checked_mkdir rtems-bare-${rtems_target} - - cd rtems-bare-${rtems_target} - - # - # Configure RTEMS. - # - # FIXME: the mapping from the rtems_target to the cpu flags - # just happens to work for the m68k targets. This should - # be mapped in a way which does not depends on the rtems_target, - # or RTEMS should support multilibs. - # - - echo "Configuring RTEMS target bare-${rtems_target} ... " - ../${RTEMS}/configure --target=${TARGET} --prefix=${RTEMS_PREFIX} \ - --enable-cxx --enable-gmake-print-directory \ - --disable-tests --disable-posix --enable-networking \ - --enable-bare-cpu-cflags=-m${rtems_target} \ - --enable-bare-cpu-model=m${rtems_target} \ - --enable-rtemsbsp=bare - check_fatal $? "failed to configure rtems target." - - # - # Do the RTEMS build. - # - - echo "Building RTEMS target bare-${rtems_target} ... " - make all install - check_fatal $? "failed to complete rtems build for target ${rtems_target}." - - # - # Remove the target if found. - # - - echo "Removing the RTEMS bare bsp directory ${RTEMS_PREFIX}/rtems/bare-${rtems_target} ... " - rm -rf ${RTEMS_PREFIX}/rtems/bare-${rtems_target} - check_fatal $? "failed to remove ${RTEMS_PREFIX}/rtems/bare-${rtems_target}." - - # - # Fix up the fact that RTEMS always installsthe bare bsp to the bare directory - # - - echo "Moving the RTEMS bare bsp directory to bare-${rtems_target} ... " - mv ${RTEMS_PREFIX}/rtems/bare ${RTEMS_PREFIX}/rtems/bare-${rtems_target} - check_fatal $? "failed to move the bare bsp directory to bare-${rtems_target}." - - cd ../ - }; done -}; done - -cd ../ - -my_exit 0 diff --git a/c/src/lib/libbsp/bare/include/.cvsignore b/c/src/lib/libbsp/bare/include/.cvsignore deleted file mode 100644 index eb2d61f966..0000000000 --- a/c/src/lib/libbsp/bare/include/.cvsignore +++ /dev/null @@ -1,5 +0,0 @@ -bspopts.h -bspopts.h.in -coverhd.h -stamp-h -stamp-h.in diff --git a/c/src/lib/libbsp/bare/include/bsp.h b/c/src/lib/libbsp/bare/include/bsp.h deleted file mode 100644 index 44146a2b2e..0000000000 --- a/c/src/lib/libbsp/bare/include/bsp.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This include file contains all board IO definitions. - * - * BARE : Allows you to build RTEMS with-out any BSP specific stuff - * - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ -*/ - -#ifndef __BARE_BSP_h -#define __BARE_BSP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include - -#include -#include -#include - -/* - * Simple spin delay in microsecond units for device drivers. - * This is very dependent on the clock speed of the target. - */ - -#define rtems_bsp_delay( microseconds ) \ - { \ - } - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/lib/libbsp/bare/preinstall.am b/c/src/lib/libbsp/bare/preinstall.am deleted file mode 100644 index 2dcdcdbfc6..0000000000 --- a/c/src/lib/libbsp/bare/preinstall.am +++ /dev/null @@ -1,45 +0,0 @@ -## Automatically generated by ampolish3 - Do not edit - -if AMPOLISH3 -$(srcdir)/preinstall.am: Makefile.am - $(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am -endif - -PREINSTALL_DIRS = -DISTCLEANFILES += $(PREINSTALL_DIRS) - -all-am: $(PREINSTALL_FILES) - -PREINSTALL_FILES = -CLEANFILES = $(PREINSTALL_FILES) - -$(PROJECT_LIB)/$(dirstamp): - @$(MKDIR_P) $(PROJECT_LIB) - @: > $(PROJECT_LIB)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp) - -$(PROJECT_INCLUDE)/$(dirstamp): - @$(MKDIR_P) $(PROJECT_INCLUDE) - @: > $(PROJECT_INCLUDE)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp) - -$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs -PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs - -$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h - -$(PROJECT_INCLUDE)/tm27.h: ../../shared/include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h - -$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h - -$(PROJECT_INCLUDE)/coverhd.h: ../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h - -- cgit v1.2.3