From 09213ec317685fa3e6f956a3ddc68f425d2fe1eb Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Mon, 5 Oct 1998 13:53:16 +0000 Subject: Patch from Ralf Corsepius : As mentioned in other mails before, there is are minor inconsistencies in the posix custom/*cfg files. Linux-posix.cfg sets RTEMS_BSP=posix FreeBSD-posix.cfg sets RTEMS_BSP=posix Solaris-posix.cfg first sets RTEMS_BSP=posix, later it sets RTEMS_BSP=solaris2 1. Setting RTEMS_BSP=posix is redunant to settings in default.cfg 2. The solaris variant of setting RTEMS_BSP is merely non-functional. The patch attached to this mail should clean up this issue. The patch was tested by building the posix bsp under i686-pc-linux-glibc1/glibc2 and Solaris2.6 (I did not run any rtems program, however) The HPUX9 and FreeBSD configuration files were adapted in analogy to the solaris and linux configurations. --- configure | 116 +++++++++++++++++++++--------------------- make/custom/FreeBSD-posix.cfg | 3 -- make/custom/HPUX9-posix.cfg | 3 -- make/custom/Linux-posix.cfg | 3 -- make/custom/Solaris-posix.cfg | 4 -- 5 files changed, 59 insertions(+), 70 deletions(-) diff --git a/configure b/configure index b1d08bade7..b85cb3bc29 100644 --- a/configure +++ b/configure @@ -2477,9 +2477,11 @@ if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then else cat > conftest.s << EOF .code16 - data32 addr32 lgdt 0 + data32 + addr32 + lgdt 0 EOF - if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then + if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2485: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then rtems_cv_prog_gas_code16=yes else rtems_cv_prog_gas_code16=no @@ -2494,7 +2496,7 @@ echo "$ac_t""$rtems_cv_prog_gas_code16" 1>&6 # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2498: checking for $ac_word" >&5 +echo "configure:2500: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2523,7 +2525,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2527: checking for $ac_word" >&5 +echo "configure:2529: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2571,7 +2573,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2575: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2577: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2581,11 +2583,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2605,12 +2607,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2609: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2611: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2614: checking whether we are using GNU C" >&5 +echo "configure:2616: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2619,7 +2621,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2623: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2625: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2634,7 +2636,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2638: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2640: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2663,19 +2665,19 @@ fi echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 -echo "configure:2667: checking for Cygwin32 environment" >&5 +echo "configure:2669: checking for Cygwin32 environment" >&5 if eval "test \"`echo '$''{'rtems_cv_cygwin32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* rtems_cv_cygwin32=yes else @@ -2693,7 +2695,7 @@ CYGWIN32= test "$rtems_cv_cygwin32" = yes && CYGWIN32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:2697: checking for executable suffix" >&5 +echo "configure:2699: checking for executable suffix" >&5 if eval "test \"`echo '$''{'rtems_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2729,12 +2731,12 @@ test "$ac_cv_prog_cc_g" = "yes" && CC_CFLAGS_DEBUG_V=-g for ac_func in strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2733: checking for $ac_func" >&5 +echo "configure:2735: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2786,7 +2788,7 @@ if test "$target_cpu" = "unix" ; then echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6 -echo "configure:2790: checking whether $RTEMS_HOST supports System V semaphores" >&5 +echo "configure:2792: checking whether $RTEMS_HOST supports System V semaphores" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2795,7 +2797,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -2821,7 +2823,7 @@ int main () { } EOF -if { (eval echo configure:2825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_sem="yes" else @@ -2844,7 +2846,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6 echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6 -echo "configure:2848: checking whether $RTEMS_HOST supports System V shared memory" >&5 +echo "configure:2850: checking whether $RTEMS_HOST supports System V shared memory" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2853,7 +2855,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -2869,7 +2871,7 @@ int main () { } EOF -if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_shm="yes" else @@ -2892,7 +2894,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6 echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6 -echo "configure:2896: checking whether $RTEMS_HOST supports System V messages" >&5 +echo "configure:2898: checking whether $RTEMS_HOST supports System V messages" >&5 if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2901,7 +2903,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < @@ -2917,7 +2919,7 @@ int main () { } EOF -if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then rtems_cv_sysv_msg="yes" else @@ -2942,7 +2944,7 @@ fi # find all the Executive Makefiles echo $ac_n "checking for Makefile.in in c/src/exec/score/tools/$target_cpu""... $ac_c" 1>&6 -echo "configure:2946: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5 +echo "configure:2948: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5 if test -d $srcdir/c/src/exec/score/tools/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -2957,7 +2959,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/exec/rtems""... $ac_c" 1>&6 -echo "configure:2961: checking for Makefile.in in c/src/exec/rtems" >&5 +echo "configure:2963: checking for Makefile.in in c/src/exec/rtems" >&5 if test -d $srcdir/c/src/exec/rtems; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -2972,7 +2974,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/exec/sapi""... $ac_c" 1>&6 -echo "configure:2976: checking for Makefile.in in c/src/exec/sapi" >&5 +echo "configure:2978: checking for Makefile.in in c/src/exec/sapi" >&5 if test -d $srcdir/c/src/exec/sapi; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -2989,7 +2991,7 @@ fi if test "$RTEMS_HAS_POSIX_API" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/exec/posix""... $ac_c" 1>&6 -echo "configure:2993: checking for Makefile.in in c/src/exec/posix" >&5 +echo "configure:2995: checking for Makefile.in in c/src/exec/posix" >&5 if test -d $srcdir/c/src/exec/posix; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3011,7 +3013,7 @@ if test -d "$srcdir/c/src/lib/libbsp/$target_cpu"; then if test -z "$rtems_bsp"; then echo $ac_n "checking for bsps""... $ac_c" 1>&6 -echo "configure:3015: checking for bsps" >&5 +echo "configure:3017: checking for bsps" >&5 files=`ls $srcdir/c/src/lib/libbsp/$target_cpu` for file in $files; do case $file in @@ -3076,7 +3078,7 @@ echo "configure:3015: checking for bsps" >&5 bspdirs="$bspdirs $bspdir" echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir""... $ac_c" 1>&6 -echo "configure:3080: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5 +echo "configure:3082: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5 if test -d $srcdir/c/src/lib/libbsp/$bspcpudir$bspdir; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3091,7 +3093,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared""... $ac_c" 1>&6 -echo "configure:3095: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5 +echo "configure:3097: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5 if test -d $srcdir/c/src/lib/libbsp/${bspcpudir}shared; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3114,7 +3116,7 @@ fi # find all the CPU dependent library Makefiles echo $ac_n "checking for Makefile.in in c/src/lib/libcpu/$target_cpu""... $ac_c" 1>&6 -echo "configure:3118: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5 +echo "configure:3120: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5 if test -d $srcdir/c/src/lib/libcpu/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3131,7 +3133,7 @@ fi if test "$skip_startfiles" != "yes"; then echo $ac_n "checking for Makefile.in in c/src/lib/start/$target_cpu""... $ac_c" 1>&6 -echo "configure:3135: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5 +echo "configure:3137: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5 if test -d $srcdir/c/src/lib/start/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3163,12 +3165,12 @@ fi # If the TCP/IP stack is enabled, then find all TCP/IP Makefiles echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6 -echo "configure:3167: checking if networking is enabled? " >&5 +echo "configure:3169: checking if networking is enabled? " >&5 echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6 if test "$RTEMS_HAS_NETWORKING" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/lib/libnetworking""... $ac_c" 1>&6 -echo "configure:3172: checking for Makefile.in in c/src/lib/libnetworking" >&5 +echo "configure:3174: checking for Makefile.in in c/src/lib/libnetworking" >&5 if test -d $srcdir/c/src/lib/libnetworking; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3190,7 +3192,7 @@ fi # If the tests are enabled, then find all the test suite Makefiles echo $ac_n "checking if the test suites are enabled? ""... $ac_c" 1>&6 -echo "configure:3194: checking if the test suites are enabled? " >&5 +echo "configure:3196: checking if the test suites are enabled? " >&5 tests_enabled=yes # Check whether --enable-tests or --disable-tests was given. if test "${enable_tests+set}" = set; then @@ -3209,7 +3211,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/tools/$target_cpu""... $ac_c" 1>&6 -echo "configure:3213: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5 +echo "configure:3215: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5 if test -d $srcdir/c/src/tests/tools/$target_cpu; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3226,7 +3228,7 @@ fi if test "$tests_enabled" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/tests/libtests""... $ac_c" 1>&6 -echo "configure:3230: checking for Makefile.in in c/src/tests/libtests" >&5 +echo "configure:3232: checking for Makefile.in in c/src/tests/libtests" >&5 if test -d $srcdir/c/src/tests/libtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3241,7 +3243,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/sptests""... $ac_c" 1>&6 -echo "configure:3245: checking for Makefile.in in c/src/tests/sptests" >&5 +echo "configure:3247: checking for Makefile.in in c/src/tests/sptests" >&5 if test -d $srcdir/c/src/tests/sptests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3256,7 +3258,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/tmtests""... $ac_c" 1>&6 -echo "configure:3260: checking for Makefile.in in c/src/tests/tmtests" >&5 +echo "configure:3262: checking for Makefile.in in c/src/tests/tmtests" >&5 if test -d $srcdir/c/src/tests/tmtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3271,7 +3273,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/mptests""... $ac_c" 1>&6 -echo "configure:3275: checking for Makefile.in in c/src/tests/mptests" >&5 +echo "configure:3277: checking for Makefile.in in c/src/tests/mptests" >&5 if test -d $srcdir/c/src/tests/mptests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3287,7 +3289,7 @@ fi if test "$RTEMS_HAS_POSIX_API" = "yes"; then echo $ac_n "checking for Makefile.in in c/src/tests/psxtests""... $ac_c" 1>&6 -echo "configure:3291: checking for Makefile.in in c/src/tests/psxtests" >&5 +echo "configure:3293: checking for Makefile.in in c/src/tests/psxtests" >&5 if test -d $srcdir/c/src/tests/psxtests; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3305,7 +3307,7 @@ fi # If the HWAPI is enabled, the find the HWAPI Makefiles echo $ac_n "checking if the HWAPI is enabled? ""... $ac_c" 1>&6 -echo "configure:3309: checking if the HWAPI is enabled? " >&5 +echo "configure:3311: checking if the HWAPI is enabled? " >&5 # Check whether --enable-hwapi or --disable-hwapi was given. if test "${enable_hwapi+set}" = set; then enableval="$enable_hwapi" @@ -3316,7 +3318,7 @@ if test "${enable_hwapi+set}" = set; then makefiles="$makefiles c/src/lib/libhwapi/Makefile" echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/analog""... $ac_c" 1>&6 -echo "configure:3320: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5 +echo "configure:3322: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5 if test -d $srcdir/c/src/lib/libhwapi/analog; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3331,7 +3333,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/discrete""... $ac_c" 1>&6 -echo "configure:3335: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5 +echo "configure:3337: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5 if test -d $srcdir/c/src/lib/libhwapi/discrete; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3346,7 +3348,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/drivers""... $ac_c" 1>&6 -echo "configure:3350: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5 +echo "configure:3352: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5 if test -d $srcdir/c/src/lib/libhwapi/drivers; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3361,7 +3363,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory""... $ac_c" 1>&6 -echo "configure:3365: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5 +echo "configure:3367: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5 if test -d $srcdir/c/src/lib/libhwapi/non_volatile_memory; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3376,7 +3378,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/serial""... $ac_c" 1>&6 -echo "configure:3380: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5 +echo "configure:3382: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5 if test -d $srcdir/c/src/lib/libhwapi/serial; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3391,7 +3393,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/support""... $ac_c" 1>&6 -echo "configure:3395: checking for Makefile.in in c/src/lib/libhwapi/support" >&5 +echo "configure:3397: checking for Makefile.in in c/src/lib/libhwapi/support" >&5 if test -d $srcdir/c/src/lib/libhwapi/support; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3406,7 +3408,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/wrapup""... $ac_c" 1>&6 -echo "configure:3410: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5 +echo "configure:3412: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5 if test -d $srcdir/c/src/lib/libhwapi/wrapup; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3454,7 +3456,7 @@ fi # pick up all the Makefiles in required parts of the tree echo $ac_n "checking for Makefile.in in c/build-tools""... $ac_c" 1>&6 -echo "configure:3458: checking for Makefile.in in c/build-tools" >&5 +echo "configure:3460: checking for Makefile.in in c/build-tools" >&5 if test -d $srcdir/c/build-tools; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3469,7 +3471,7 @@ fi echo $ac_n "checking for Makefile.in in make""... $ac_c" 1>&6 -echo "configure:3473: checking for Makefile.in in make" >&5 +echo "configure:3475: checking for Makefile.in in make" >&5 if test -d $srcdir/make; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3484,7 +3486,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/lib/libmisc""... $ac_c" 1>&6 -echo "configure:3488: checking for Makefile.in in c/src/lib/libmisc" >&5 +echo "configure:3490: checking for Makefile.in in c/src/lib/libmisc" >&5 if test -d $srcdir/c/src/lib/libmisc; then rtems_av_save_dir=`pwd`; cd $srcdir; @@ -3499,7 +3501,7 @@ fi echo $ac_n "checking for Makefile.in in c/src/tests/samples""... $ac_c" 1>&6 -echo "configure:3503: checking for Makefile.in in c/src/tests/samples" >&5 +echo "configure:3505: checking for Makefile.in in c/src/tests/samples" >&5 if test -d $srcdir/c/src/tests/samples; then rtems_av_save_dir=`pwd`; cd $srcdir; diff --git a/make/custom/FreeBSD-posix.cfg b/make/custom/FreeBSD-posix.cfg index 76af11b358..99225f0d9a 100644 --- a/make/custom/FreeBSD-posix.cfg +++ b/make/custom/FreeBSD-posix.cfg @@ -10,10 +10,7 @@ RTEMS_UNIX_FLAVOR=freebsd # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=posix - -# share the posix bsp TARGET_ARCH=o-freebsd2 -RTEMS_BSP=posix include $(RTEMS_ROOT)/make/custom/default.cfg diff --git a/make/custom/HPUX9-posix.cfg b/make/custom/HPUX9-posix.cfg index 333c238701..31f1f8e180 100644 --- a/make/custom/HPUX9-posix.cfg +++ b/make/custom/HPUX9-posix.cfg @@ -15,10 +15,7 @@ RTEMS_UNIX_FLAVOR=hpux # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=posix - -# share the posix bsp TARGET_ARCH=o-hpux9 -RTEMS_BSP=posix include $(RTEMS_ROOT)/make/custom/default.cfg diff --git a/make/custom/Linux-posix.cfg b/make/custom/Linux-posix.cfg index fc4a33efea..fcd9c9be5b 100644 --- a/make/custom/Linux-posix.cfg +++ b/make/custom/Linux-posix.cfg @@ -11,10 +11,7 @@ RTEMS_UNIX_FLAVOR=linux # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=posix - -# share the posix bsp TARGET_ARCH=o-linux1 -RTEMS_BSP=posix include $(RTEMS_ROOT)/make/custom/default.cfg diff --git a/make/custom/Solaris-posix.cfg b/make/custom/Solaris-posix.cfg index 370e7c3e73..0120081bb7 100644 --- a/make/custom/Solaris-posix.cfg +++ b/make/custom/Solaris-posix.cfg @@ -11,10 +11,6 @@ RTEMS_UNIX_FLAVOR=solaris # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=posix -RTEMS_BSP=posix - -# share the posix bsp -RTEMS_BSP=solaris2 TARGET_ARCH=o-solaris2 include $(RTEMS_ROOT)/make/custom/default.cfg -- cgit v1.2.3