| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
| |
For architectures with relatively large minimum stack sizes, this test
breaks during compilation due to a static check. The init task stack
size should not need to be set for this test.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When I use the 'shell' from the fileio sample with the command below:
env QEMU_AUDIO_DRV="none" \
qemu-system-arm -no-reboot -net none -nographic -M realview-pbx-a9 \
-m 256M \
-kernel build/arm/realview_pbx_a9_qemu/testsuites/samples/fileio.exe
The executable crashes with an "BLOWN STACK!!!" as soon as I try to login
as 'root' with password. (The logins without password work fine.)
Increasing the stack size of the affected thread a bit solves the issue.
Hence, I suggest this patch.
My config.ini was
[arm/realview_pbx_a9_qemu]
RTEMS_DEBUG = True
RTEMS_NETWORKING = True
RTEMS_POSIX_API = True
RTEMS_SMP = True
BUILD_TESTS = True
RTEMS origin.master at a479686c112144119866391ceb21c48be6a3eca9
Close #4143
|
|
|
|
|
|
|
|
| |
Rename this header file to later move <t.h> to <rtems/test.h>. The main
feature provided by <rtems/test-info.h> is the output of standard test
information which is consumed by the RTEMS Tester.
Update #3199.
|
|
|
|
|
|
| |
This configuration option is obsolete since 2014.
Update #1367.
|
|
|
|
|
|
|
|
| |
Allocate new thread queue heads during objects information extend. This
removes an error case and the last dependency on the workspace in
_Thread_Initialize().
Update #3835.
|
|
|
|
|
| |
Remove CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY since it is not needed and
just increases the boot time.
|
|
|
|
|
|
|
| |
Rename CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS into
CONFIGURE_MAXIMUM_FILE_DESCRIPTORS.
Update #3753.
|
|
|
|
| |
Update #3841.
|
|
|
|
| |
This include is superfluous.
|
|
|
|
| |
Update #3818.
|
| |
|
| |
|
|
|
|
| |
This avoids link-time failures on some low memory BSPs.
|
| |
|
|
|
|
|
|
|
| |
Use Objects_Information::objects_per_block to provide this information.
Add and use _Objects_Is_auto_extend().
Update #3621.
|
|
|
|
| |
This work was performed as a GCI 2018 task.
|
| |
|
|
|
|
| |
Remove use of TMPINSTALL_FILES.
|
|
|
|
| |
Update #3533.
|
|
|
|
| |
Update #3358.
|
|
|
|
| |
Update #3358.
|
|
|
|
| |
Update #3358.
|
|
|
|
| |
Update #3433.
|
| |
|
|
|
|
| |
Avoid resource allocation problems with unlimited objects.
|
|
|
|
| |
Update #3409.
|
|
|
|
|
|
|
|
|
|
|
| |
This option silences warning with automake-1.16.1 allowing us to
upgrade to that version.
This change has been tested with automake-1.12.6 and automake-1.16.1.
It seems version 1.16.1 configures slower than 1.12.6 for the same
source and BSP. The newer versions is 6 second slower.
Close #3387.
|
|
|
|
|
|
| |
This change is part of the testsuite Makefile.am reorganization.
Update #3382
|
|
|
|
|
| |
A "make dist" is not supported. So, it makes no sense to have pure "make
dist" related stuff in the Makefile.am.
|
|
|
|
| |
Update #2843.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
| |
|
|
|
|
|
|
| |
Add a tests enum and move all test banner test to the library in libmisc.
Update #3199.
|
| |
|
| |
|
|
|
|
|
| |
Update #3170.
Update #3199.
|
|
|
|
|
| |
Update #3170.
Update #3199.
|
|
|
|
|
| |
Update #3170.
Update #3199.
|
|
|
|
|
|
|
|
| |
The TEST_EXTERN is a used only by the system.h style tests and they use
CONFIGURE_INIT appropriately.
Update #3170.
Update #3199.
|
|
|
|
|
|
|
|
| |
Use rtems_print_printer_fprintf_putc() instead of
rtems_print_printer_printf() to output via rtems_putc().
Update #3170.
Update #3199.
|
|
|
|
|
|
|
| |
Statically initialize it to use printk().
Update #3170.
Update #3199.
|
|
|
|
|
|
|
|
|
|
| |
- Remove the printf support leaving the direct printk support configured
with TESTS_USE_PRINTK and all other output goes via a buffered vsniprintf
call to printk.
- Control the test's single init for functions and global data with
TEST_INIT and not CONFIGURE_INIT. They are now separate.
Updates #3170.
|
|
|
|
| |
Close #3088.
|
|
|
|
|
|
|
| |
These tests directly or indirectly use fprintf(), etc. which may use the
floating point unit.
Update #3076.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
errors.
- Add a top level test configuration file for test states that are common
to all BSPs. This saves adding a test configuration (tcfg) file for
every BSP.
- Add the test states 'user-input' and 'benchmark'. This
lets 'rtems-test' stop the test rather than waiting for a timeout or
letting a benchmark run without the user asking for it to run.
- Implement rtems-test-check in Python to make it faster. The shell script
had grown to a point it was noticably slowing the build down.
- Fix the configure.ac and Makefile.am files for a number of the
test directories. The files are difficiult to keep in sync with the
number of tests and mistakes can happen such as tests being left
out of the build. The test fsrofs01 is an example. Also a there was
a mix of SUBDIRS and _SUBDIRS being used and only _SUBDIRS should be
used.
- Fix the test fsrofs01 so it compiles.
Closes #2963.
|
| |
|
| |
|
|
|
|
| |
Update #2830.
|
|
|
|
| |
Avoid unnecessary use of CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM.
|
|
|
|
|
|
| |
The RTEMS print user need to know nothing about a particular printer
implementation. In particular get rid of the <stdio.h> include which
would be visible via <rtems.h>.
|