| Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:
Changes:
------
1. SH-Port:
* Many files renamed.
* CONSOLE_DEVNAME and MHZ defines removed from libcpu.
* console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console
applying VPATH.
* CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
* MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
* -DHZ=HZ used in bspstart.c, only
* Makefile variable HZ used in bsp-dependent directories only.
2. SH1-Port
* clock-driver rewritten to provide better resolution for odd CPU
frequencies. This driver is only partially tested on hardware, ie.
sightly experimental, but I don't expect severe problems with it.
* Polling SCI-driver added. This driver is experimental and completly
untested yet. Therefore it is not yet used for the console (/dev/console
is still pointing to /dev/null, cf. gensh1/bsp.h).
* minor changes to the timer driver
* SH1 specific delay()/CPU_delay() now is implemented as a function
3. SH2-Port
* Merged
* IMO, the code is still in its infancy. Therefore I have interspersed
comments (FIXME) it for items which I think John should look after.
* sci and console drivers partially rewritten and extended (John, I hope
you don't mind).
* Copyright notices are not yet adapted
|
|
unnecessarily uses any variables defined by the BSP. On this
sweep, use of BSP_Configuration and Cpu_table was eliminated.
A significant part of this modification was the addition of
macros to access fields in the RTEMS configuration structures.
This is necessary to strengthen the division between the BSP independent
parts of RTEMS and the BSPs themselves. This started after
comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
|
|
|
|
to correct a typo CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES was actually
typed in as CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES.
|
|
> 4) rtems-rc-19990202-0.diff /reorg-score-cpu.sh
>
> reorg-score-cpu.sh reorganizes the cpu/<cpu>/* subdirectories in a
> similar manner than previous reorg scripts did. rtems-rc-19990202-0.diff
> contains the diffs after reorg-score-cpu.sh has been run on a
> rtems-19981215 snapshot + my patches up to rtems-rc-19990131-2.diff.
>
> This patch is rather nasty and may break something. However, I've tested
> it for about 10 different target/bsp pairs and believe to have shaken
> out most bugs.
I wonder about the following .h files that were not moved:
a29k/asm.h
a29k/cpu_asm.h
i386/asm.h
i960/asm.h
m68k/asm.h
m68k/m68302.h
m68k/m68360.h
m68k/qsm.h
m68k/sim.h
mips64orion/asm.h
mips64orion/cpu_asm.h
mips64orion/mips64orion.h
no_cpu/asm.h
no_cpu/cpu_asm.h
powerpc/asm.h
powerpc/mpc860.h
sh/asm.h
sparc/asm.h
sparc/erc32.h
|
