| Commit message (Collapse) | Author | Files | Lines |
|---|
|
* Makefile.am, rtems/score/Makefile.am:
Apply include_*HEADERS instead of H_FILES.
|
|
* rtems/score/cpu.h: Added _CPU_Initialize_vectors().
|
|
* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
|
|
* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
|
|
* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
Switch to GNU canonicalization.
|
|
* Makefile.am: Include compile.am.
|
|
* rtems/score/no_cpu.h: Modified so there are fewer and
more consistent variations on "no cpu" so it is easier
to sed the source as the starting point for a new port.
|
|
|
|
that decouples exec/ for the sh, m68k and i960 from targopts.h.
NOTE: The change to system.h is a hack to enable cpuopts.h
for some targets, but keep using targopts.h for others - I know it
does *not* work for sparc, mips, i386 and ppc. This will have
to be addressed as work continues on multilibing.
|
|
_Interrupt_Manager_initialization.
|
|
|
|
adds .cvsignore.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:
* Modifications, (minor) corrections, cleanups to most existing
Makefile.ams
* Adds automake support to all remaining BSPs which have not yet been
converted to automake.
* Makefile.am for all remaining wrapup/Makefile.ams
|
|
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
|
|
|
|
unnecessarily uses any variables defined by the BSP. On this
sweep, use of BSP_Configuration and Cpu_table was eliminated.
A significant part of this modification was the addition of
macros to access fields in the RTEMS configuration structures.
This is necessary to strengthen the division between the BSP independent
parts of RTEMS and the BSPs themselves. This started after
comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
|
|
to correct a typo CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES was actually
typed in as CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES.
|
|
|
|
|
|
> 4) rtems-rc-19990202-0.diff /reorg-score-cpu.sh
>
> reorg-score-cpu.sh reorganizes the cpu/<cpu>/* subdirectories in a
> similar manner than previous reorg scripts did. rtems-rc-19990202-0.diff
> contains the diffs after reorg-score-cpu.sh has been run on a
> rtems-19981215 snapshot + my patches up to rtems-rc-19990131-2.diff.
>
> This patch is rather nasty and may break something. However, I've tested
> it for about 10 different target/bsp pairs and believe to have shaken
> out most bugs.
I wonder about the following .h files that were not moved:
a29k/asm.h
a29k/cpu_asm.h
i386/asm.h
i960/asm.h
m68k/asm.h
m68k/m68302.h
m68k/m68360.h
m68k/qsm.h
m68k/sim.h
mips64orion/asm.h
mips64orion/cpu_asm.h
mips64orion/mips64orion.h
no_cpu/asm.h
no_cpu/cpu_asm.h
powerpc/asm.h
powerpc/mpc860.h
sh/asm.h
sparc/asm.h
sparc/erc32.h
|
|
|
|
|
|
|
|
of switching to the modified GNU GPL.
|
|
|
|
|
|
|
|
part of the Thread Handler. This required the name of the optional
CPU dependent IDLE thread implementation to change.
|
|
|
|
|
|
|
|
Configuration Table Template file added and all tests
modified to use this. All gvar.h and conftbl.h files
removed from test directories.
Configuration parameter maximum_devices added.
Core semaphore and mutex handlers added and RTEMS API Semaphore
Manager updated to reflect this.
Initialization sequence changed to invoke API specific initialization
routines. Initialization tasks table now owned by RTEMS Tasks Manager.
Added user extension for post-switch.
Utilized user extensions to implement API specific functionality
like signal dispatching.
Added extensions to the System Initialization Thread so that an
API can register a function to be invoked while the system
is being initialized. These are largely equivalent to the
pre-driver and post-driver hooks.
Added the Modules file oar-go32_p5, modified oar-go32, and modified
the file make/custom/go32.cfg to look at an environment varable which
determines what CPU model is being used.
All BSPs updated to reflect named devices and clock driver's IOCTL
used by the Shared Memory Driver. Also merged clock isr into
main file and removed ckisr.c where possible.
Updated spsize to reflect new and moved variables.
Makefiles for the executive source and include files updated to show
break down of files into Core, RTEMS API, and Neither.
Header and inline files installed into subdirectory based on whether
logically in the Core or a part of the RTEMS API.
|
|
|
|
|
|
|
|
|
