| Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
a BSP (c4xsim) supporting the simulator included with gdb. This port
was done by Joel Sherrill and Jennifer Averett of OAR Corporation.
Also included with this port is a space/time optimization to eliminate
FP context switch management on CPUs without hardware or software FP.
An issue with this port was that sizeof(unsigned32) = sizeof(unsigned8)
on this CPU. This required addressing alignment checks and assumptions
as well as fixing code that assumed sizeof(unsigned32) == 4.
|
|
|
|
routines and structures that require CPU model specific information
are now in libcpu. This primarily required moving erc32 specific
information from score/cpu files to libcpu/sparc and the erc32 BSP.
|
|
routines and structures that require CPU model specific information
are now in libcpu. This required significant rework of the
score/cpu header files and the creation of multiple header files
and subdirectories in libcpu/i960.
|
|
that decouples exec/ for the sh, m68k and i960 from targopts.h.
NOTE: The change to system.h is a hack to enable cpuopts.h
for some targets, but keep using targopts.h for others - I know it
does *not* work for sparc, mips, i386 and ppc. This will have
to be addressed as work continues on multilibing.
|
|
|
|
|
|
|
|
adds .cvsignore.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:
* Modifications, (minor) corrections, cleanups to most existing
Makefile.ams
* Adds automake support to all remaining BSPs which have not yet been
converted to automake.
* Makefile.am for all remaining wrapup/Makefile.ams
|
|
|
|
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/i960/wrap
rm -rf c/src/exec/score/cpu/m68k/wrap
rm -rf c/src/exec/score/cpu/sh/wrap
rm -rf c/src/exec/score/cpu/sparc/wrap
rm -rf c/src/exec/score/cpu/unix/wrap
patch -p1 < rtems-rc-19991123-rc-1.diff
./bootstrap
Known bugs:
* "make debug|profile" in c/src/src/score/cpu/<RTEMS_CPU/Makefile does
not handle recursion to subdirectories correctly (recurses too often).
However, this issue is hardly visible and should be tolerable for the
moment.
|
|
|
|
unnecessarily uses any variables defined by the BSP. On this
sweep, use of BSP_Configuration and Cpu_table was eliminated.
A significant part of this modification was the addition of
macros to access fields in the RTEMS configuration structures.
This is necessary to strengthen the division between the BSP independent
parts of RTEMS and the BSPs themselves. This started after
comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
|
|
|
|
<mark@ramix.com> of RAMIX.
|
|
disabled on exit to ISR Thread dispatching. This allows a
context switch to finish under high high interrupt rates.
|
|
fixed by Joel.
|
|
Please take a look at this new patch. It contains a cleaner implementation
of the reset operation. These patches are against 4.0.0. But the files
did not change from the 3.6.0 release. Also, the cpu.h patch below still
applies. I.e. instead of using i960ca_PRCB, use i960_PRCB.
Explanation:
The previous patch removed the use of the reset instruction,
because it always fails. But this was due to the fact that
some of the registers were corrupted by the re-init procedure.
The new patches save and restore those registers when a re-init
is done.
|
|
|
|
to correct a typo CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES was actually
typed in as CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES.
|
|
based on 3.6.0. It was very lucky that this went in as well as it
did.
|
|
|
|
|
|
> 4) rtems-rc-19990202-0.diff /reorg-score-cpu.sh
>
> reorg-score-cpu.sh reorganizes the cpu/<cpu>/* subdirectories in a
> similar manner than previous reorg scripts did. rtems-rc-19990202-0.diff
> contains the diffs after reorg-score-cpu.sh has been run on a
> rtems-19981215 snapshot + my patches up to rtems-rc-19990131-2.diff.
>
> This patch is rather nasty and may break something. However, I've tested
> it for about 10 different target/bsp pairs and believe to have shaken
> out most bugs.
I wonder about the following .h files that were not moved:
a29k/asm.h
a29k/cpu_asm.h
i386/asm.h
i960/asm.h
m68k/asm.h
m68k/m68302.h
m68k/m68360.h
m68k/qsm.h
m68k/sim.h
mips64orion/asm.h
mips64orion/cpu_asm.h
mips64orion/mips64orion.h
no_cpu/asm.h
no_cpu/cpu_asm.h
powerpc/asm.h
powerpc/mpc860.h
sh/asm.h
sparc/asm.h
sparc/erc32.h
|
|
.s files to .S in conformance with GNU conventions. This is a
minor step along the way to supporting automake.
|
|
|
|
|
|
of switching to the modified GNU GPL.
|
|
|
|
|
|
|
|
|
|
Configuration Table Template file added and all tests
modified to use this. All gvar.h and conftbl.h files
removed from test directories.
Configuration parameter maximum_devices added.
Core semaphore and mutex handlers added and RTEMS API Semaphore
Manager updated to reflect this.
Initialization sequence changed to invoke API specific initialization
routines. Initialization tasks table now owned by RTEMS Tasks Manager.
Added user extension for post-switch.
Utilized user extensions to implement API specific functionality
like signal dispatching.
Added extensions to the System Initialization Thread so that an
API can register a function to be invoked while the system
is being initialized. These are largely equivalent to the
pre-driver and post-driver hooks.
Added the Modules file oar-go32_p5, modified oar-go32, and modified
the file make/custom/go32.cfg to look at an environment varable which
determines what CPU model is being used.
All BSPs updated to reflect named devices and clock driver's IOCTL
used by the Shared Memory Driver. Also merged clock isr into
main file and removed ckisr.c where possible.
Updated spsize to reflect new and moved variables.
Makefiles for the executive source and include files updated to show
break down of files into Core, RTEMS API, and Neither.
Header and inline files installed into subdirectory based on whether
logically in the Core or a part of the RTEMS API.
|
|
|
|
|
