| Commit message (Collapse) | Author | Files | Lines |
|
It fixes netboot build problem, KA9Q configuration
for pc386, some compiler wardning, it also removed some stuff
ifdef'ed with '#if 0'.
|
|
make solaris target buildable.
> 1. The ipc check fails since solaris does not define union semun.
> The unix port code actually defines this type itself on solaris. Doing
> the same thing lets it get configured. Then...
> 2. It looks like BSDINSTALL is not defined properly.
BSDINSTALL is defined in make/host.cfg.in as
BSDINSTALL=@INSTALL@
@INSTALL@ is generated by autoconf's standard macro AC_PROG_INSTALL, which
is widely used in almost any autoconf/automake configured package. In case
there is really something wrong with it, then it must be considered a bug
in autoconf.
I can see a doubious fragment in AC_PROG_INSTALL, which is used when no
appropriate bsd-install is found.
Finally Ralf saw a problem with the find on solaris which I also saw and
fixed.
|
|
when the bare bsp was enabled without setting both --enable-cpu-model
and --enable-cpu-cflags.
|
|
Here is a enhanced version of my previous patch. This patch enables
to potentially share the new interrupt management code for all Intel targets
(pc386, go32 and force386) bsp.
Note : this patch is complete only for pc386. It still needs to
be completed for go32 and force386. I carrefully checked
that anything needed is in for force386 (only some function
name changes for IDT manipulation and GDT segment
manipulation). But anyway I will not be able to test any
of theses targets...
|
|
<corsepiu@faw.uni-ulm.de> which attempts to detect when the UNIX port
is being configured on a system without System V IPC support. This
is an optional component on both FreeBSD and Linux systems. Most
Linux 2.x kernels ship with it enabled but it is still a real risk.
This test may have undesirable side-effects on some hosts. We will
address those conflicts as they arise.
|
|
|
|
one of the aclocal macros.
|
|
|
|
made no attempt to divide the comments up and place them with just
the appropriate files. Here is an excerpt from Ralf's email:
Changes including comments on changes I made after cycling through
all the targets:
* Added ranlib support. Now all targets use "ranlib" instead of "ar -s"
to build an index for a library. If ranlib isn't detected during
configuration, check if ar -s is working and try "ar -s" instead of
* Removed $(XXX_FOR_TARGET) from make/target.cfg.in, use $(XXX) instead now.
* gcc-target-default.cfg: LINK_XXXX-defines reworked to solve the -l
problem under posix (cf gcc-target-default.cfg)
* rtems-glom replaced by Makefile-rules inside of the wrapup/Makefile.in
that has been using rtems-glom until now.
* Removed CCC and friends in gcc-target-default.cfg, as they have been
breaking CXX support.
* Removed CONFIG.$(TARGET_ARCH).CC lines from several custom/*.cfg
files, because this is now set in custom/default.cfg.
* Added aclocal/ar-s.m4, check whether "ar -s" is working
* Added aclocal/cygwin.m4 and aclocal/exeext.m4.
* Reworked aclocal/canonicalize-tools.m4: Added ar -s check; fixes for
problems when XXX_FOR_TARGET is given via environment variables (didn't
work for gcc until now), adding cygwin check, improved autoconf-cache
handling.
* Removed -l from make rule dependencies. LINK_LIBS is now allowed to
contain -L and -l. LINK_OBJS and LINK_FILES must not contain -L or -l.
gcc28 make-exe rules now link using $(LINK_OBJS) $(LINK_LIBS) => Almost
all custom/*.cfg are modified. This is very likely to break something
because of typos or having missed to edit a file.
Open problems, known bugs, things I didn't do:
* custom/p4000.cfg seems to be out of date and requires to be reviewed.
(JRS NOTE: It is subordinate p4650 and p4600 -- both of which build ok
after minor changes.)
* custom/psim.cfg needs to be reviewed, I added some changes to it, I am
insecure about.
(JRS NOTE: psim had a minor problem endif/endef swapped but runs fine.)
* rtems-glom.in can now be removed.
* gcc*.cfg files "make depend" rules don't honor language specific flags
(e.g CXXFLAGS is ignored for *.cc) - Nothing to worry about now, but may
cause problems for hosts/targets not using gcc or rtems-add-ons that use
external packages.
* AFAIS, the no_bsp BSP can't be build anymore, i.e. configure refused
to configure for it whatever I tried.
* The toplevel and toplevel+1 README files are quite out-dated
* cygwin.m4 isn't of much use for rtems. In most cases (cf.
aclocal/*.m4) it is worked around by directly using $host_os. I think
I'll remove it soon after the next snapshot
* Before release the cygwin patch needs to be tested under cygwin. I may
have broken/missed something (esp. the sed-pattern to convert \\ into /
may be broken).
* You should try to build/run the posix-BSP under solaris - I don't
expect problems, but I am not 100% sure, esp. with regard to ranlib/ar -s.
* You should consider to convert all make/compilers/*.cfg files into
make/compilers/*.cfg.in files and let autoconf generate the *.cfg. This
may help getting rid of some if/then/else statements and help
hard-coding some defines into those files in future and shouldn't
disturb now.
* Not having installed libc.a/libm.a on a host may still break building
rtems, esp. when using -disable-gcc28 as the gcc27-configuration scheme
directly accesses libc.a and libm.a. The problem should not appear when
using gcc28 because it references libc/libm only through -lc and -lm
which may be static or dynamic (I didn't test this).
* shgen is not yet included (I didn't yet have enough time to integrate it).
* I know about a few more configure-probs (esp. cross-checking
--enable-* flags).
+ warn/refuse to configure when --enable-libcdir and
--enable-gcc28 are given.
+ force --enable-libcdir when --disable-gcc28 is given
* Replaced KSHELL with @KSH@ in some shell scripts generated by configure.in.
* Added a dependency to aclocal/*.m4 in the toplevel Makefile => configure
and aclocal.m4 will now be rebuild when any aclocal/*.m4 file is changed
* Some changes to aclocal/gcc-pipe.m4 and aclocal/gcc-specs.m4
* Replaced i[[3456]]86-unknown-freebsd2.[[12]] with i[[3456]]86-*freebsd2.*
in configure.in, as I suppose there might exist a variety of valid vendors
(2nd field of the name-tripple)
* Disabled override MAKEFLAGS in toplevel Makefile.in - Potential
side-effects are not really clear to me.
* In mvme162.cfg, $(LINK_LIBS) is missing in the CC line in gcc28's make-exe
rule (yet another one I missed to edit). Just append $(LINK_LIBS) to
the "CC" line, like I hopefully did to ALL other custom/*.cfg files.
* the problem with mvme162lx.cfg is a follow-up problem of the
mvme162.cfg-bug.
* mvme162/console and idp/console had variables named Buffer which
conflicted with similarly named variables in some tests.
|
|
|
|
|
|
a BSP source directory was present to eliminate a chunk of redundant code.
|
|
|
|
|
|
Bare BSP is now only enabled when explicitly specified.
Bare BSP options and variables are clearly named so as to be obviously
BSP specific. This should avoid conflicts.
|
|
|
|
|
|
support.
|
|
|
|
gcc-target-default.cfg
|
|
followed GNU conventions.
|
|
|
|
|
|
|
|
successfully work on powerpc-rtems and hppa1.1-rtems.
|
|
support the -pipe option on the compiler.
|
|
specified. Otherwise a target specific runtest is not installed.
|
|
"Ladies and Gentlement, we proudly present: a roughly hacked autoconf-ed
rtems-glom.in" (:-)
BTW, to follow up to the discussion about installation points, rtems-glom in
its current shape is an ideal example of a target dependent file. If
bsp-specific configure-scripts would exist, it might also be a bsp-dependent
file that contains RTEMS_BSP hard-coded (by configure) into it.
|
|
Yep, I have a bunch of bug-fixes and additions pending (Yet another monster
patch, ... I can hear you scream :-).
1) configure.in : one AC_CONFIG_HEADER(...) line too much.
5) configure.in: --enable-cpp should probably be renamed to --enable-cxx, as
gnu-programs use "cxx" to specify C++ specific configure options, while cpp
is used for the preprocessor (e.g egcs uses --with-cxx-includedir, autoconf
internally uses $CXX),
|
|
|
|
|
|
Here is the result of my nightly work to get RTEMS_ROOT=$srcdir working
with different shells and relative/absolute paths.
What I did is relatively simple in principle:
Instead of setting RTEMS_ROOT in configure.in and then let configure
substitute @RTEMS_ROOT@ inside the Makefiles, I now let each Makefile
set RTEMS_ROOT from each Makefile's @top_srcdir@ value.
The difference is subtile, but with enormous side effects:
- If RTEMS_ROOT is set in configure, then the same single value will be
propagated to all Makefiles. This breaks using relative paths, as the
relative path to the root of the source tree is used inside of all
subdirectory Makefiles.
- Now each Makefile.in sets RTEMS_ROOT = @top_srcdir@. top_srcdir is
computed individually by configure for each single Makefile.in, hereby
receiving the correct value, no matter if relative or absolute paths are
used.
To get this working, I needed to remove setting RTEMS_ROOT from
target.cfg.in, because this overrides the value of RTEMS_ROOT from each
individual Makefile.
Furthermore, I removed RTEMS_CUSTOM from the Makefiles and replaced all
"include $(RTEMS_CUSTOM)" directives with"include
$(RTEMS_ROOT)/make/custom/$(RTEMS_BSP)". Perhaps you don't like this,
but I think, to have one variable less is clearer and easier to
understand than having several variables refering to the next one.
I enclose a small patch to this mail, which
- fixes the config.h problem (to finally clearify misunderstands)
- removes assignment/subsitution of RTEMS_ROOT from configure.in
- contains a workaround for the application Makefile's RTEMS_ROOT
problem (reported by Eric)
- removes some unused lines from the toplevel Makefile.in
- removes assignment of RTEMS_ROOT from make/target.cfg.in
|
|
|
|
|
|
|
|
direction. This fixes a problem reported by Steve Evans of Radstone
since he is using glibc2.
|
|
|
|
> RTEMS is under CVS control and has been since rtems 3.1.16 which was
> around May 1995. So I just to add the $Id$. If you notice other files
> with missing $Id$'s let me know. I try to keep w\up with it.
Now that you have asked -- I'll attach a list of files lacking an RCS-Id to
this mail. This list has been generated by a little sh-script I'll also
enclose.
|
|
|
|
configuration successfully.
Added code to detect configuring macros and POSIX API at the same time.
There is no macro implementation for the POSIX API.
|
|
|
|
|
|
|
|
any directory in the build tree. The only variable which must be set
before the command "gmake" is invoked is RTEMS_BSP (e.g. RTEMS_BSP=erc32).
|
|
Avoid generating Makefiles for KA9Q and C++ when they are disabled.
|
|
|
|
Makefiles would be properly generated.
|
|
generating Makefiles where possible.
Added code to make sure make/custom file and bsp directory exist for
configured bsps. This code also accounts for "aliased" BSPs.
|
|
eliminated autoconf looking for commands which are unused, and reduce the
number of Makefiles generated.
|
|
generate the list of Makefiles in the configure script.
|