| Commit message (Collapse) | Author | Files | Lines |
|
> 5) rtems-rc-19990202-1.diff/reorg-install.sh
>
> reorg-install.sh fixes a Makefile variable name clash of RTEMS
> configuration files and automake/autoconf standards.
> Until now, RTEMS used $(INSTALL) for install-if-change. Automake and
> autoconf use $(INSTALL) for a bsd-compatible install. As
> install-if-change and bsd-install are not compatible, I renamed all
> references to install-if-changed to $(INSTALL_CHANGED) and used
> $(INSTALL) for bsd-install (==automake/autoconf standard). When
> automake will be introduced install-if-change will probably be replaced
> by $(INSTALL) and therefore will slowly vanish. For the moment, this
> patch fixes a very nasty problem which prevents adding any automake file
> until now (There are still more).
|
|
1. Rtems contains some perl scripts that use hard-coded paths to
/usr/bin/perl or /usr/local/bin/perl I have already fixed these
problems by adding some checks to configure.in. While doing this,
I also cleaned up some more autoconf related problems for generating
shell scripts. This patch might seem a bit scary to you, but I am
quite confident it won't break something (I've been testing it for
almost a week now, however it might introduce typos for a limited
number configurations I don't have access to - But it shouldn't be
a problem for you to test them :-).
I expect to get this finished tonight, hence you will very likely
have the patch when you get up tomorrow.
Changes:
* Check for PERL and disable all PERL scripts if perl wasn't found.
* Generate all KSHELL-scripts with autoconf instead of make-script
* Automatic dependency handling for autoconf generated KSHELL or PERL
scripts (make/rtems.cfg)
Notes:
* this patch contains new files and deletes some other files.
* The patch is relative to rtems-4.0.0-beta4 with my previous
rtems-rc-981014-1.diff patch applied.
Testing:
I tested it with sh-rtems and posix under linux. Now all targets
which are touched by this patch and which are not used while building
for sh-rtems and posix still need to be tested. AFAIS, only the
sparc/erc32 BSP should be affected by this criterion. And if you
like to, you should also consider testing it on a Cygwin32 and a
Solaris host for one arbitrary BSP.
|
|
make solaris target buildable.
> 1. The ipc check fails since solaris does not define union semun.
> The unix port code actually defines this type itself on solaris. Doing
> the same thing lets it get configured. Then...
> 2. It looks like BSDINSTALL is not defined properly.
BSDINSTALL is defined in make/host.cfg.in as
BSDINSTALL=@INSTALL@
@INSTALL@ is generated by autoconf's standard macro AC_PROG_INSTALL, which
is widely used in almost any autoconf/automake configured package. In case
there is really something wrong with it, then it must be considered a bug
in autoconf.
I can see a doubious fragment in AC_PROG_INSTALL, which is used when no
appropriate bsd-install is found.
Finally Ralf saw a problem with the find on solaris which I also saw and
fixed.
|
|
* Added support for bsd "install" ($(BSDINSTALL)) to host.cfg.in, i.e.
the standard "install" program that most packages (including automake)
use. In Makefiles outside of rtems, "install" normally is referenced by
$(INSTALL), but rtems already uses $(INSTALL) for install-if-change,
hence I used $(BSDINSTALL) instead to keep up backward compatibility.
* Removed references to @GREP@ etc. from host.cfg.in, as configure.in
doesn't check for them (Minor cleanup).
* Added installation flags INST*FLAGS to host.cfg.in, which should
replace -m XXXX flags for installation calls.
*Changes to gcc.cfg to enable it to build host programs from multiple
sources files.
Should not disturb existing sources, but neccessary.
* There was a not-so-minor bug in the configuration files: "make
install" and "make debug_install" don't work in all subdirectories!! I
tried to fix this by adding "install" to MTARGETS in main.cfg, which
seems to solve most of the problems. But there still seem to be rare (?)
cases where "make debug_install" still seems to have problems.
* Changes to many host related tool-Makefiles to demonstrate the
abilities of INST*FLAGS, BSDINSTALL and the new rules in gcc.cfg.
..of cause ... but BSDINSTALL is THE standard method to install files
in most program packages besides rtems. This part of the patch fixes
some minor protection setting problems, but doesn't support
TARGET_VARIANTS
NOTE:
I hope you will like the BSDINSTALL, INST*FLAGS stuff. It is a step to
get rid of "install-if-change" and to rely on a more standard
installation procedure. If you don't like BSDINSTALL, removing it from
the patch isn't difficult- just grep for BSDINSTALL and replace
BSDINSTALL with INSTALL or MKDIR.
FINALLY:
I still have another patch pending (well, not a complete patch yet, it's
a partial patch to demonstrate the principle), which adds automatic
rebuilding of files generated by autoconf/configure. At the moment I
don't dare to submit it, because integrating this patch would require to
modify all Makefile.ins because we'd need to add a new "include " line
to each Makefile.in.
|
|
Here is the result of my nightly work to get RTEMS_ROOT=$srcdir working
with different shells and relative/absolute paths.
What I did is relatively simple in principle:
Instead of setting RTEMS_ROOT in configure.in and then let configure
substitute @RTEMS_ROOT@ inside the Makefiles, I now let each Makefile
set RTEMS_ROOT from each Makefile's @top_srcdir@ value.
The difference is subtile, but with enormous side effects:
- If RTEMS_ROOT is set in configure, then the same single value will be
propagated to all Makefiles. This breaks using relative paths, as the
relative path to the root of the source tree is used inside of all
subdirectory Makefiles.
- Now each Makefile.in sets RTEMS_ROOT = @top_srcdir@. top_srcdir is
computed individually by configure for each single Makefile.in, hereby
receiving the correct value, no matter if relative or absolute paths are
used.
To get this working, I needed to remove setting RTEMS_ROOT from
target.cfg.in, because this overrides the value of RTEMS_ROOT from each
individual Makefile.
Furthermore, I removed RTEMS_CUSTOM from the Makefiles and replaced all
"include $(RTEMS_CUSTOM)" directives with"include
$(RTEMS_ROOT)/make/custom/$(RTEMS_BSP)". Perhaps you don't like this,
but I think, to have one variable less is clearer and easier to
understand than having several variables refering to the next one.
I enclose a small patch to this mail, which
- fixes the config.h problem (to finally clearify misunderstands)
- removes assignment/subsitution of RTEMS_ROOT from configure.in
- contains a workaround for the application Makefile's RTEMS_ROOT
problem (reported by Eric)
- removes some unused lines from the toplevel Makefile.in
- removes assignment of RTEMS_ROOT from make/target.cfg.in
|
|
> RTEMS is under CVS control and has been since rtems 3.1.16 which was
> around May 1995. So I just to add the $Id$. If you notice other files
> with missing $Id$'s let me know. I try to keep w\up with it.
Now that you have asked -- I'll attach a list of files lacking an RCS-Id to
this mail. This list has been generated by a little sh-script I'll also
enclose.
|
|
any directory in the build tree. The only variable which must be set
before the command "gmake" is invoked is RTEMS_BSP (e.g. RTEMS_BSP=erc32).
|
|
GNU autoconf. This is the first large step in allowing an RTEMS
user to perform a one-tree build (per crossgcc FAQ) including RTEMS
in the build process. With this change RTEMS is configured in
built in the same style as the GNU tools, yet retains the basic
structure of its traditional Makefiles (ala Tony Bennett).
Jiri Gaisler (jgais@wd.estec.esa.nl) deserves (and received)
a big thank you for doing this.
There are still issues to be resolved but as of this commit, all target
which can be built on a linux host have been using a modified version
of the source Jiri submitted. This source was merged and most targets
built in the tree before this commit.
There are some issues which remain to be resolved but they are primarily
related to host OS dependencies, script issues, the use of gawk
for hack_specs, and the dependence on gcc snapshots. These will
be resolved.
|