summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Rename hppa1_1 to hppa1.1 and switched to using __XXX__ macros forJoel Sherrill1998-03-244-17/+17
| | | | the CPU family name constants.
* new fileJoel Sherrill1998-03-241-0/+54
|
* Converted to conditionally uses strerr code to better work with glibc2.Joel Sherrill1998-03-232-8/+21
|
* Patches from Eric Norum:Joel Sherrill1998-03-239-174/+85
| | | | | | | Here are some patches to the gen68360 BSP. The improvements include: Boot prom run-time selection of DRAM size (1/4/16 Mbytes) Full 32-bit ethernet address obtained from boot prom. Updated README.
* Added BSP specific start since it had become VERY complex to attemptJoel Sherrill1998-03-213-1/+325
| | | | to share the start code across i386 BSPs.
* Switch to using a shared main() for all of the embedded BSPsJoel Sherrill1998-03-2168-459/+186
| | | | | | | | based on the GNU tools. This usually involved correcting the type of bsp_start(), bsp_cleanup(), adjusting the start code to call the right start routine (the shared boot_card()), and then removing code from bsp_start() which was performed in the new boot_card()/main() path.
* Fixed typo.Joel Sherrill1998-03-202-2/+2
|
* New port from Ralf Corsepius <corsepiu@faw.uni-ulm.de>.Joel Sherrill1998-03-202-0/+114
|
* SH port submitted from Ralf Corsepius <corsepiu@faw.uni-ulm.de>.Joel Sherrill1998-03-2013-0/+1248
|
* Patch from Eric Norum:Joel Sherrill1998-02-231-1/+1
| | | | | | | | | Here's another small patch. The changes to socket.h are to provide some definitions that UNIX BSD socket programmers expect. The memcpy.c contains a memcpy routine optimized for the CPU32+. When I run the ttcp benchmark with this routine I get host->68360 transfers around 165 kbytes/sec (about a 25% improvement) and 68360->host transfers of around 290 kbytes/sec (about a 50% improvement).
* Patch from Eric Norum:Joel Sherrill1998-02-191-36/+42
| | | | | | | | | | While trying to work through this problem I decided that the build-time selection of the console I/O operation (polling or interrupt) was too clumsy. Here's a patch that allows run-time (actually init-time) selection of the console I/O mode. It also shows the need for another `flags' or `options' field in the rtems_driver_address_table structure...
* updated copyright to 1998Joel Sherrill1998-02-17251-251/+251
|
* Added .eh_frame, C++ constructor, and C++ destructor sections.Joel Sherrill1998-02-1717-1/+251
|
* Incorporated Ralf Corsepius' idea for new -q flags to properly supportJoel Sherrill1998-02-1120-40/+142
| | | | "gmake debug".
* Don't install tools using variant name.Joel Sherrill1998-02-111-1/+1
|
* Problem report from Brian Cuthie regarding incorrect calculationJoel Sherrill1998-02-061-1/+2
| | | | | | | | | of BSS size. The conversion from a count of u8's to a count of u32's was shifting in the wrong direction. This error had been in the start code a long time. It had not caused problems because the BSS is typically much smaller than the C heap which typically follows it in memory. Plus since this code was executed at start time, all that really happened was an extra zeroing of some memory.
* Corrected spelling error so interrupt driven console would work.Joel Sherrill1998-02-031-2/+2
|
* Big patch form Ralf Corsepius described in this email:Joel Sherrill1998-01-30203-812/+406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here is the result of my nightly work to get RTEMS_ROOT=$srcdir working with different shells and relative/absolute paths. What I did is relatively simple in principle: Instead of setting RTEMS_ROOT in configure.in and then let configure substitute @RTEMS_ROOT@ inside the Makefiles, I now let each Makefile set RTEMS_ROOT from each Makefile's @top_srcdir@ value. The difference is subtile, but with enormous side effects: - If RTEMS_ROOT is set in configure, then the same single value will be propagated to all Makefiles. This breaks using relative paths, as the relative path to the root of the source tree is used inside of all subdirectory Makefiles. - Now each Makefile.in sets RTEMS_ROOT = @top_srcdir@. top_srcdir is computed individually by configure for each single Makefile.in, hereby receiving the correct value, no matter if relative or absolute paths are used. To get this working, I needed to remove setting RTEMS_ROOT from target.cfg.in, because this overrides the value of RTEMS_ROOT from each individual Makefile. Furthermore, I removed RTEMS_CUSTOM from the Makefiles and replaced all "include $(RTEMS_CUSTOM)" directives with"include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP)". Perhaps you don't like this, but I think, to have one variable less is clearer and easier to understand than having several variables refering to the next one. I enclose a small patch to this mail, which - fixes the config.h problem (to finally clearify misunderstands) - removes assignment/subsitution of RTEMS_ROOT from configure.in - contains a workaround for the application Makefile's RTEMS_ROOT problem (reported by Eric) - removes some unused lines from the toplevel Makefile.in - removes assignment of RTEMS_ROOT from make/target.cfg.in
* Corrected Linux port for glibc2Joel Sherrill1998-01-301-1/+1
|
* Fixed missing carriage return at the bottom of the file reportedJoel Sherrill1998-01-271-1/+0
| | | | by Ralf Corsepius
* Solaris port updates from Chris JohnsJoel Sherrill1998-01-231-3/+0
|
* Added information about multilib problems.Joel Sherrill1998-01-231-0/+8
|
* Added some GRUB information from Phil Wilshire.Joel Sherrill1998-01-221-0/+12
|
* Removed CONFIG_DIR and PROJECT_HOME directories.Joel Sherrill1998-01-20203-219/+204
|
* Ralf Corsepius reported a number of missing CVS Id's:Joel Sherrill1998-01-1638-108/+176
| | | | | | | | | | > RTEMS is under CVS control and has been since rtems 3.1.16 which was > around May 1995. So I just to add the $Id$. If you notice other files > with missing $Id$'s let me know. I try to keep w\up with it. Now that you have asked -- I'll attach a list of files lacking an RCS-Id to this mail. This list has been generated by a little sh-script I'll also enclose.
* Updates from Eric Norum. Changed CPU CFLAG and went to a common nameJoel Sherrill1998-01-061-150/+112
| | | | for the network driver attach entry point.
* Fixes from Eric Norum. C++ support added in previous version was broken:Joel Sherrill1997-12-223-291/+272
| | | | | | | | | | | | | | | | | | 1) In my haste to add C++ constructor/destructors to the 68360 linkcmds scripts I managed to break all existing 68360 programs. Linker scripts which actually produce a working executable are contained below. The problem was that the constructor/destructors weren't included before the etext symbol. On top of that Eric and I appear to have problems with attachments: 2) In deciphering the above problem I think I stumbled across the reason you've had with patches mailed from me. I noticed that the linkcmds (and linkcmds.bootp) scripts in the latest distribution have a control-M (carriage return) at the end of each line. Could you check the files below before installing them in the distribution and see that there aren't returns in the files? Maybe if I send everything as a tar attatchment things will work better.
* Corrected prototypes for all termios console write driver entries toJoel Sherrill1997-12-223-4/+4
| | | | properly reflect the const on the buffer pointer being passed in.
* Moved -qnolinkcmds option so arguments passed on the command line areJoel Sherrill1997-12-2019-38/+38
| | | | | | | | | | | | | | | | | | | | | interpreted at the right point per Eric Norum's discovery: The problem with the my previous `fix' for adding linker commands was with the ordering of the options to the linker. For example, to make a larger heap size, the application Makefile would CFLAGS_LD = -Wl,--defsym -Wl,HeapSize=0x40000 The command passed to the linker would be : m68k-rtems-ld .... -T xxx/linkcmds .... --defsym HeapSize=0x40000 ..... This doesn't work because the script in linkcmds inserts a default value for HeapSize if HeapSize is not defined by the time the linker looks at the linkcmds script. The solution seems to be to move the -T linkcmds%s in the bsp_specs file out of the link specfication and into the lib specification -- a little unorthodox, perhaps, but it seems to work!
* Update from Eric Norum to include C++ support.Joel Sherrill1997-12-203-239/+281
|
* Modified bsp_specs per Eric Norum's suggestion to handle -qnolinkcmdsJoel Sherrill1997-12-1919-19/+19
| | | | switch which lets the user specify a different linker script.
* Modified a lot of files to take a first cut at supporting building fromJoel Sherrill1997-12-10203-204/+813
| | | | | any directory in the build tree. The only variable which must be set before the command "gmake" is invoked is RTEMS_BSP (e.g. RTEMS_BSP=erc32).
* Changed the uuencode line to work better with VPATH setups.Joel Sherrill1997-12-061-2/+2
|
* Inclusion of PC386 BSP submitted by Pedro Miguel Da Cruz Neto RomanoJoel Sherrill1997-12-0130-0/+4892
| | | | | <pmcnr@camoes.rnl.ist.utl.pt> and Jose Rufino <ruf@asterix.ist.utl.pt> of NavIST (http://pandora.ist.utl.pt/).
* Corrected call to rtems_termios_open.Joel Sherrill1997-11-301-1/+2
|
* Removed warnings.Joel Sherrill1997-11-182-1/+6
|
* Added argument as required by new version of termios_open.Joel Sherrill1997-11-181-2/+4
|
* Fixed assignment to dereference ch.Joel Sherrill1997-11-181-1/+1
|
* Changed from DOS style CR/LF to Unix style.Joel Sherrill1997-11-181-534/+534
|
* interrupt driven change from Eric NorumJoel Sherrill1997-11-151-11/+43
|
* Switched to new style for read support routine.Joel Sherrill1997-10-231-10/+6
|
* Added TOD driver from Katsutoshi Shibuya.Joel Sherrill1997-10-236-3/+190
|
* Removed GEN68360_INIT.Joel Sherrill1997-10-231-8/+0
|
* Update from Eric Norum.Joel Sherrill1997-10-231-161/+153
|
* Updated console driver to use new read routine conventions.Joel Sherrill1997-10-231-6/+3
|
* Added console_reserve_resources.Joel Sherrill1997-10-232-6/+15
|
* Overhauled console driver to use termios and to simultaneously supportJoel Sherrill1997-10-233-149/+170
| | | | both ports.
* Converted to termios style device driver.Joel Sherrill1997-10-211-265/+144
|
* Control and Data addresses were swapped for port A.Joel Sherrill1997-10-161-2/+2
|
* Moved selection of console port to custom file.Joel Sherrill1997-10-151-3/+0
|
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-05 03:48:54 +0000