summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Remove CVS-Ids.Ralf Corsépius2012-05-0420-68/+0
|
* nds/linkcmds - Remove execute permissionJoel Sherrill2012-05-031-0/+0
|
* General - Remove extraneous blank line in license messageJoel Sherrill2012-05-0358-45/+0
| | | | | | | | | | | | | Many files had an extra blank line in the license text found in the file header. This patch removes that line. * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * * http://www.rtems.com/license/LICENSE. The script that did this also turned off execute permission when it was turned on incorrectly.
* smdk2410 - Remove odd $Id$Joel Sherrill2012-05-021-2/+0
|
* gp32 - Remove odd $Id$Joel Sherrill2012-05-021-3/+0
|
* pc386 - Remove odd $Id$Joel Sherrill2012-05-027-14/+0
|
* score603e - Remove bad $Id$ and clean up file headerJoel Sherrill2012-05-021-4/+6
|
* LEON3 - Remove bad $Id$ and clean up file headerJoel Sherrill2012-05-021-4/+6
|
* LEON2 - Remove bad $Id$ and clean up file headerJoel Sherrill2012-05-021-4/+6
|
* MRM332 - Remove incorrect $Id$ string and correct file headerJoel Sherrill2012-05-022-2/+26
|
* bsps/stackalloc: Add initialization hookSebastian Huber2012-04-262-16/+23
|
* bsp/mpc55xxevb: Enable stack allocatorSebastian Huber2012-04-246-4/+10
|
* bsps/stackalloc: Use stack section symbolsSebastian Huber2012-04-245-55/+26
|
* bsps/powerpc: Add no cache sectionSebastian Huber2012-04-2414-89/+78
|
* bsp/mpc55xxevb: Change early MMU settingsSebastian Huber2012-04-243-17/+28
| | | | | | Add internal SRAM sections with cache enabled to early MMU settings. The internal SRAM initialization will use the early MMU settings. This allows applications to use cache inhibited areas in the internal SRAM.
* bsp/lpc24xx: Fix define nameSebastian Huber2012-04-231-1/+1
|
* bsps/arm: Make the Clock_isr() static againSebastian Huber2012-04-201-1/+1
|
* bsps: Avoid rtems_irq_hdl_param type usageSebastian Huber2012-04-201-2/+1
| | | | | Not every clock interrupt service routine is installed with this API. Remove also the prototype to allow drivers to make this routine static.
* bsp/genmcf548x: Enable FPU in BSP startup codeSebastian Huber2012-04-201-13/+5
|
* bsp/genmcf548x: Fix BSP optionsSebastian Huber2012-04-201-3/+4
|
* bsps/arm: Remove superfluous includeSebastian Huber2012-04-201-1/+0
|
* lpc shared: Clock driver clean up and ISR Handler Prototype Correction.Joel Sherrill2012-04-191-1/+1
|
* armv7m shared: Clock driver clean up and ISR Handler Prototype Correction.Joel Sherrill2012-04-191-1/+2
|
* nds: Clock driver clean up and ISR Handler Prototype Correction.Joel Sherrill2012-04-191-15/+8
|
* gba: Clock driver clean up and ISR Handler Prototype Correction.Joel Sherrill2012-04-191-32/+25
|
* edb7312: Clock driver clean up and ISR Handler Prototype Correction.Joel Sherrill2012-04-191-19/+14
|
* Clock Driver Shell - Correct PIC IRQ Prototype.Joel Sherrill2012-04-191-2/+2
|
* LEON3: rename console/debugputs.c to printk_support.cDaniel Hellstrom2012-04-192-1/+1
|
* LEON3: added TX-wait-complete and CR on NL support for UARTDaniel Hellstrom2012-04-192-6/+23
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: debugputs removed pointless isinit code, invoked only onceDaniel Hellstrom2012-04-191-34/+26
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: debugputs added printk mem buffer when no UART presentDaniel Hellstrom2012-04-191-1/+13
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: add console interrupt mode supportDaniel Hellstrom2012-04-192-23/+153
| | | | | | | | | The comment in configure.ac is probably inherited from the LEON2 BSP. The LEON3 console driver implements a "flush" mechanism on console_close() in order to solve the problem described with sis/LEON2. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: add console attributes such as parity and baudrateDaniel Hellstrom2012-04-191-3/+68
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: console, lower bus utilization waiting for UART TX readyDaniel Hellstrom2012-04-191-3/+7
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON: updated drivers to use new AMBAPP LayerDaniel Hellstrom2012-04-1731-259/+266
| | | | | | | The drivers are updated to use the new AMBA layer, however the backwards-compatibility interface (ambapp_old) is used. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: Network initialization code updated to new AMBAPP layerDaniel Hellstrom2012-04-173-41/+50
| | | | | | | Updated SMC91111, GRETH and open_eth driver registration code to use new AMBAPP Layer. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON3: updated console driver for new AMBAPP layerDaniel Hellstrom2012-04-177-43/+75
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON2: clock driver use new AMBAPP layerDaniel Hellstrom2012-04-171-8/+8
| | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* LEON: updated AMBA PnP APIDaniel Hellstrom2012-04-1719-634/+1839
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old layer had some limitations/problems for multiple AHB buses since the data structure containing all AMBA devices were allocated before scanning. The new layer create devices as they are found and memory is allocated using malloc() or bsp_early_malloc() during booting. The old 8 functions for finding a specific AHB-Slave or APB-Slave device has been replaced with one function, ambapp_for_each(), which iterates over all devices matching the specified search options and calls a user provided function. The new way lowers the footprint and makes searching more flexible. The frequency information is now supported, if the frequency of one device is reported by the user. More AHB-to-AHB bridges are supported. The API has been split into several parts in order to lower the footprint. The API also introduces the AMBAPP CORE concept, where one ambapp_core can be created from one AHB Master, AHB Slave and one APB Slave, at least one device is required for creating a core. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* no_cpu: replace no_cpu_isr with rtems_isrGedare Bloom2012-04-162-3/+3
|
* lm32: use shared setvec.cGedare Bloom2012-04-162-44/+1
|
* m68k: use shared setvec.cGedare Bloom2012-04-1623-60/+23
|
* lm32: replace lm32_isr with rtems_isrGedare Bloom2012-04-162-3/+3
|
* m68k: replace m68k_isr with rtems_isrGedare Bloom2012-04-1633-56/+56
|
* bsp/stm32f4: API changesSebastian Huber2012-04-159-83/+174
|
* bsp/stm32f4: Add IO and RCCSebastian Huber2012-04-129-55/+487
|
* PR2052: LEON3: fix open_eth interrupt initialization bugDaniel Hellstrom2012-04-101-4/+4
| | | | | | | Fixed a bug where the vector number is used to clean and unmask the IRQ at the IRQ controller, the irq number must be used. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* bsp/stm32f4: New BSPSebastian Huber2012-04-0717-0/+1085
|
* bsps/arm: Add BSP_ARMV7M_SYSTICK_PRIORITYSebastian Huber2012-04-073-5/+6
|
* bsps/arm: Add BSP_ARMV7M_IRQ_PRIORITY_DEFAULTSebastian Huber2012-04-073-2/+6
|