| Commit message (Collapse) | Author | Files | Lines |
|
This commit deletes all RTEMS ChangeLog files. These files have been abandoned
since converting to git version control. The historical data may be recovered
by checking out any commit before this one. Most of the contents of these
ChangeLog files can also be found in the git log.
Two external ChangeLog files, ChangeLog.slac and ChangeLog.zlib, remain.
|
|
* shared/can/occan.c: Comment out unused var "tmp".
|
|
PR 1933/cpukit
* shared/irq_asm.S: From code inspection I have found the following
issues (most SMP), and some improvements in irq_asm.S. I would need a
long test with interrupts to verify the interrupt handler better,
however I can not see that these patches hurt. Please see comment per
hunk below, One should go through the file to indent delay-slots
correctly, I have fixed some in the patch areas. An extra space is
added in front of delay slots to indicate a delay slot.
|
|
PR 1801
* shared/irq_asm.S: Modifications to synch the sparc with the smp
working tree.
|
|
Jennifer Averett <jennifer.averett@OARcorp.com>
PR 1801/bsps
* shared/start.S: Add SMP support to LEON3 BSP.
|
|
* Makefile.am: Remove references to non-existing files.
|
|
PR 1795/bsps
* erc32/Makefile.am, leon2/Makefile.am, leon3/Makefile.am: Add
rtems_bsp_delay to sparc bsps.
* erc32/startup/bspdelay.c, leon2/startup/bspdelay.c,
leon3/startup/bspdelay.c: New files.
|
|
PR 1729/cpukit
* shared/irq_asm.S: New file.
|
|
* shared/1553/b1553brm.c, shared/can/grcan.c, shared/can/occan.c,
shared/spw/grspw.c, shared/uart/apbuart.c:
Use "__asm__" instead of "asm" for improved c99-compliance.
|
|
* configure.ac: Require autoconf-2.68, automake-1.11.1.
|
|
* leon2/pci/pci.c, leon3/pci/pci.c: Fix typo where license said
found in found in.
|
|
* shared/bspgetworkarea.c: Formatting.
|
|
* shared/startup/linkcmds.base: New file.
|
|
* shared/spw/grspw_rasta.c: Guard prototype of
grspw_rasta_calc_memoffs in #ifdef GRSPW_STATIC_MEM to avoid
warning.
|
|
* shared/gnatcommon.c: #include <unistd.h>.
|
|
PR 1483/cpukit
* shared/include/pci.h: Rename pci_config into rtems_pci_config_t.
|
|
* shared/bsppretaskinghook.c: New file. Was really common.
* shared/bspstart.c: Removed. Was really leon2 specific.
|
|
* shared/bspgetworkarea.c: Add debug prints of memory information.
|
|
* shared/include/pci.h: Add prototypes for BusCountPCI(void),
init_pci(void).
|
|
* shared/include/pci.h: Revert extern inline patch.
|
|
* shared/include/pci.h: Change extern inline to static inline.
|
|
* shared/start.S: Fix comment.
|
|
* shared/bspgetworkarea.c: Switch from ssize_t to uintptr_t for
bsp_get_work_area() since the work area is larger than a single
allocatable object.
|
|
* shared/start.S: Checked and OK.
|
|
* shared/start/start.S: Update for boot_card command line change.
|
|
PR 1386/bsps
* shared/start.S: Stack space not correctly initialized. Causes
failures on unoptimized applications.
|
|
* shared/bspgetworkarea.c: Change size_t to ssize_t on
bsp_get_work_area(). On 16-bit architectures, size_t can be 16-bits
which would limit the work area to 64K.
|
|
* shared/bspclean.c: Removed.
|
|
* shared/bspstart.c: Remove unnecessary includes of rtems/libcsupport.h
and rtems/libio.h.
|
|
* shared/bspstart.c: Use shared bsp_get_work_area() in its own file and
rely on BSP Framework to perform more initialization.
* shared/bspgetworkarea.c: New file.
|
|
* shared/bspstart.c: Remove bogus local declaration.
|
|
added support for an optional separate heap area.
|
|
* shared/bspstart.c, shared/start.S: Add capability for bootcard.c BSP
Initialization Framework to ask the BSP where it has memory for the
RTEMS Workspace and C Program Heap. These collectively are referred
to as work area. If the BSP supports this, then it does not have to
include code to split the available memory between the two areas.
This reduces the amount of code in the BSP specific bspstart.c file.
Additionally, the shared framework can initialize the C Library, call
rtems_debug_enable(), and dirty the work area memory. Until most/all
BSPs support this new capability, if the BSP supports this, it should
call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
When the transition is complete, this autoconf macro can be removed.
|
|
* shared/bspstart.c: Refactored and renamed initialization routines to
rtems_initialize_data_structures, rtems_initialize_before_drivers,
rtems_initialize_device_drivers, and
rtems_initialize_start_multitasking. This opened the sequence up so
that bootcard() could provide a more robust and flexible framework
which is easier to explain and understand. This also lays the
groundwork for sharing the division of available memory between the
RTEMS workspace and heap and the C library initialization across all
BSPs.
|
|
* shared/start.S: Spacing.
|
|
* shared/bspstart.c: Eliminate copies of the Configuration Table. Use
the RTEMS provided accessor macros to obtain configuration fields.
|
|
* shared/include/grcan_spwrtc.h: Removed.
|
|
* shared/include/ambapp.h: Sync head and 4.8 branch.
|
|
* shared/bspstart.c: Move interrupt_stack_size field from CPU Table to
Configuration Table. Eliminate CPU Table from all ports. Delete
references to CPU Table in all forms.
|
|
* shared/bspstart.c: Moved most of the remaining CPU Table fields to
the Configuration Table. This included pretasking_hook,
predriver_hook, postdriver_hook, idle_task, do_zero_of_workspace,
extra_mpci_receive_server_stack, stack_allocate_hook, and
stack_free_hook. As a side-effect of this effort some multiprocessing
code was made conditional and some style clean up occurred.
|
|
* shared/include/grspw.h, shared/spw/grspw.c: GRSPW SpaceWire Driver.
Fixes typecast to volatile integer instead of to integer. Added
scanning for GRSPW2 Core, The GRSPW2 core is run in legacy mode.
|
|
* shared/can/occan.c: LEON2/3 OCCAN CAN driver. Fixes typecast to
volatile integer where needed. Fixes bug where closing the driver and
opening it again could make the driver not starting transmission due
to the software fifo was not cleared.
|
|
* shared/can/grcan.c, shared/can/grcan_rasta.c,
shared/include/ambapp.h: GRCAN CAN driver. Fixes Interrupt
enabling/disabling in the driver, interrupt may not be restored
correctly. Implements the baud rate calculation routine. Removed
unnecessary printk. Fixed scanning to support GRCAN and GRHCAN
hardware. Added GRCAN device number to ambapp.h.
|
|
* Makefile.am, shared/can/occan.c, shared/include/ambapp.h: Add initial
i2c and update OC-CAN support.
* shared/i2c/i2cmst.c, shared/include/i2cmst.h: New files.
|
|
* shared/can/occan.c: Fix warning on Diab compiler.
|
|
* shared/can/occan.c: Fix Reenable command and fix typo.
|
|
* shared/1553/b1553brm.c, shared/can/grcan.c: Remove include of sched.h
|
|
* shared/spw/grspw.c: Remove include of sched.h. It does not appear to
be needed and is unavailable when POSIX is disabled.
|
|
* shared/can/grcan.c, shared/include/debug_defs.h, shared/spw/grspw.c:
Remove use of DEBUG_printf.
|
|
* shared/1553/b1553brm.c, shared/can/grcan.c, shared/can/grcan_rasta.c,
shared/can/occan.c, shared/spw/grspw.c, shared/spw/grspw_pci.c,
shared/uart/apbuart.c: Remove warnings.
|