| Commit message (Collapse) | Author | Files | Lines |
|
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
|
BSPs can use the bsp_fatal_extension() to provide BSP-specific fatal
error handling. There is no need for a _BSP_Fatal_error().
Close #3246.
|
|
Due to a new rtems_panic() implementation, it is possible to replace the
PowerPC-specific BSP_panic() with rtems_panic(). Remove BSP_panic()
implementations.
Close #3245.
|
|
CONFIGURE_INTERRUPT_STACK_SIZE
closes #2801.
|
|
|
|
warnings
|
|
|
|
This was done by the following script run from libbsp:
find * -name bsp.h | xargs -e grep -l "#ifndef.*_BSP_H" | while read b
do
echo $b
cpu=`echo $b | cut -d'/' -f1 | tr '[:lower:]' '[:upper:]' `
bsp=`echo $b | cut -d'/' -f2 | tr '[:lower:]' '[:upper:]' `
g="LIBBSP_${cpu}_${bsp}_BSP_H"
# echo $g
sed -e "s/ifndef _BSP_H/ifndef ${g}/" \
-e "s/define _BSP_H/define ${g}/" \
-i $b
done
|
|
Some includes may use C++ and this conflicts if surrounded extern "C".
|
|
|
|
|
|
timer driver
|
|
|
|
Include <bsp/default-initial-extension.h> in all BSPs. Call
rtems_fatal() with RTEMS_FATAL_SOURCE_EXIT as source and the exit()
status code as fatal code in every bsp_cleanup(). Move previous
bsp_cleanup() code into bsp_fatal_extension().
|
|
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
|
This commit covers at least PR2020, 2022, and 2023. This
patch adds all of the code for both BSPs, modifications
to libcpu/powerpc for the ppc440, and some updates to the
BSPs from follow up review and testing.
These BSPs should be good baselines for future development.
The configurations used by Ric are custom and have a non-standard
NIC. They also do not have a UART. Thus the current console
driver just prints to a RAM buffer.
The NIC and UART support are left for future work. When the UART
support is added, moving the existing "to RAM" console driver to
a shared location is likely desirable because boards with no debug
UART port are commonly deployed. This would let printk() go to RAM.
|
|
|
|
* include/bsp.h: Remove unnecessary boilerplate comments.
|
|
* Makefile.am, configure.ac, include/bsp.h, include/bspopts.h.in,
startup/bspstart.c, startup/linkcmds: Add use of bsp_get_work_area()
in its own file and rely on BSP Framework to perform more
initialization.
* startup/bspgetworkarea.c: New file.
|
|
* irq/irq_init.c, include/bsp.h:
define BSP_PPC403_CLOCK_HOOK_EXCEPTION
so that we hook the timer exception rather than going
through the interrupt dispatcher.
|
|
* README, include/bsp.h, startup/bspstart.c: Eliminate copies of the
Configuration Table. Use the RTEMS provided accessor macros to obtain
configuration fields.
|
|
* include/bsp.h, startup/bspstart.c: Move interrupt_stack_size field
from CPU Table to Configuration Table. Eliminate CPU Table from all
ports. Delete references to CPU Table in all forms.
|
|
* Makefile.am, include/bsp.h: Do not include networking
drivers if networking is disabled.
|
|
|
|
exception handling
|
|
|
|
* include/bsp.h: New header guard.
|
|
* include/bsp.h: Split out tmtest27 support.
* include/tm27.h: New.
|
|
PR 613/bsps
* include/bsp.h: Remove MAX_LONG_TEST_DURATION.
|
|
PR 614/bsps
* include/bsp.h: Remove MAX_SHORT_TEST_DURATION (Unused).
|
|
|
|
|
|
* include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>.
* include/bsp.h: Include <rtems/console.h> instead of <console.h>.
* include/bsp.h: Include <rtems/iosupp.h> instead of <iosupp.h>.
|
|
* include/bsp.h, include/coverhd.h, startup/bspclean.c,
startup/setvec.c: URL for license changed.
|
|
This modification is part of the submitted modifications necessary to
support the IBM PPC405 family. This submission was reviewed by
Thomas Doerfler <Thomas.Doerfler@imd-systems.de> who ensured it did
not negatively impact the ppc403 BSPs. The submission and tracking
process was captured as PR50.
* ChangeLog, Makefile.am, README, bsp_specs, bsp_specs.dl, configure.ac,
times, dlentry/.cvsignore, dlentry/Makefile.am, dlentry/dlentry.S,
include/.cvsignore, include/Makefile.am, include/bsp.h,
include/bspopts.h.in, include/coverhd.h, startup/.cvsignore,
startup/Makefile.am, startup/bspclean.c, startup/bspstart.c,
startup/linkcmds, startup/linkcmds.dl, startup/setvec.c,
wrapup/.cvsignore, wrapup/Makefile.am: New files that are
part of the new gen405 BSP.
|
|
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
Finally I am through: I have found the last bugs that made RTEMS-
4.0-beta3 start on my ppc403 board from ROM. So now the '403
support is up to date again.
Roughly I have added the following features:
- support for the on-chip interrupt controller (in a separate module)
- interrupt support for the console device
- termios support for the console device
==============================================
Since the BSP behaivour changed in some details (console no
longer is polling, other memory layout etc) I have created a new
BSP "helas403" rather than changing the "papyrus" BSP. The old
"polled" console driver still sticks around in "console.c.polled"
To get the BSP up and running, I had to create the new BSP files
(derived from papyrus). Besides that, the following source areas
have been changed:
- c/src/lib/libcpu/powerpc/ppc403: changes to console driver, small
changes to clock driver, new "ictrl" interrupt controller driver
- c/src/exec/score/cpu/powerpc/ppc.h: some small changes
(added ppc403 characteristics like a exception vector prefix
register, some special register definitions). I am quite sure, they
are compatible with the existing sources, although I did not check
- c/src/exec/score/cpu/powerpc/cpu.c: There is one severe
limitation in the exception entries: Due to the current code
arrangement, the "branch absolute" to the ISR handler may only
jump to the first 128MByte or the last 128MByte of the 4GByte
address range. When the ppc403 is running out of ROM, the ROM
functions are located in the last 128MByte (0xFFF00000 and up).
These addresses were not handled correctly (sign reduced) in
"install_raw_handler". The change I added should work on existing
ppc BSPs aswell...
- c/src/lib/libc/termios.c: During my tests, I added one change you
sent me, so this patch will already be incorporated in the current
source tree.
There are some smaller changes, see the attached diff file.
=========================================
Concerning the GNU toolchain:
I tried several tool chains. Finally I almost succeeded with
egcs-1.0.3a with patch egcs-1.0.3-rtems-diff-19980527
I had to add the following lines to the egcs files. Without them
configure complaint that the cross compiler could not generate
executable output.
- additional lines needed in egcs distribution in file
gcc/config/rs6000/rtems.h:
+++ lines start
#undef STARTFILE_DEFAULT_SPEC
#define STARTFILE_DEFAULT_SPEC "ecrti.o%s"
#undef ENDFILE_DEFAULT_SPEC
#define ENDFILE_DEFAULT_SPEC "ecrtn.o%s"
++++ lines end
As far as I have seen in the Changelog of egcs, you have recently
sent two patches affecting the powerpc support, but they were
added in the wrong order.... :-(
egcs-19980628 with patch egcs-19980628-rtems-diff-19980707 does
not work!
I used binutils 2.9.1 with patch binutils-2.9.1-rtems-diff-19980515
(binutils 2.8.1 does not work, internal error in gas)
and newlib-1.8.0 with patch newlib-1.8.0-rtems-diff-19980707
Finally I had to poke a line in the "bit" script, since, on my LINUX
machine, the GNU make is only available as "make", not as
"gmake"...
For all the tools and newlib I selected configuration "powerpc-
rtems".
--------------------------------------------
IMD Ingenieurbuero fuer Microcomputertechnik
Thomas Doerfler Herbststrasse 8
D-82178 Puchheim Germany
email: td@imd.m.isar.de
|
|
code in each BSP's bspstart.c. These changes were:
+ confdefs.h now knows libio's semaphore requirements
+ shared/main.c now copies Configuration to BSP_Configuration
+ shared/main.c fills in the Cpu_table with default values
This removed the need for rtems_libio_config() and the constant
BSP_LIBIO_MAX_FDS in every BSP. Plus now the maximum number of open
files can now be set on the gcc command line.
|
|
|
|
based on the GNU tools. This usually involved correcting the
type of bsp_start(), bsp_cleanup(), adjusting the start code to
call the right start routine (the shared boot_card()), and then
removing code from bsp_start() which was performed in the new
boot_card()/main() path.
|
|
|
|
|
|
of switching to the modified GNU GPL.
|
|
partially recovered working tree, etc
|
|
|
|
Configuration Table Template file added and all tests
modified to use this. All gvar.h and conftbl.h files
removed from test directories.
Configuration parameter maximum_devices added.
Core semaphore and mutex handlers added and RTEMS API Semaphore
Manager updated to reflect this.
Initialization sequence changed to invoke API specific initialization
routines. Initialization tasks table now owned by RTEMS Tasks Manager.
Added user extension for post-switch.
Utilized user extensions to implement API specific functionality
like signal dispatching.
Added extensions to the System Initialization Thread so that an
API can register a function to be invoked while the system
is being initialized. These are largely equivalent to the
pre-driver and post-driver hooks.
Added the Modules file oar-go32_p5, modified oar-go32, and modified
the file make/custom/go32.cfg to look at an environment varable which
determines what CPU model is being used.
All BSPs updated to reflect named devices and clock driver's IOCTL
used by the Shared Memory Driver. Also merged clock isr into
main file and removed ckisr.c where possible.
Updated spsize to reflect new and moved variables.
Makefiles for the executive source and include files updated to show
break down of files into Core, RTEMS API, and Neither.
Header and inline files installed into subdirectory based on whether
logically in the Core or a part of the RTEMS API.
|
|
both fixed length "raw" names and strings from the API's point of view.
Both inline and macro implementations were tested.
|