| Commit message (Collapse) | Author | Files | Lines |
|
Close #3250.
Close #4081.
|
|
|
|
This bootloader is only used by the motorola_powerpc BSP.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
This was used by the not supported "make dist".
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
This file was used by this BSP only. Avoid RTEMS_RELLDFLAGS.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
|
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
|
See http://www.rtems.org/pipermail/rtems-devel/2012-May/001006.html
for details.
|
|
|
|
|
|
|
|
* bootloader/Makefile.am: Remove DEFAULT_INCLUDES.
|
|
|
|
PR 717/bsps
* bootloader/Makefile.am: Set up BOOTLOADER_CPU_CFLAGS.
|
|
* Makefile.am, configure.ac, bootloader/Makefile.am, include/bsp.h,
wrapup/Makefile.am: Add MVME2100 BSP and MPC8240 support. There was
also a significant amount of spelling and whitespace cleanup.
* README.MVME2100: New file.
|
|
* bootloader/Makefile.am: Fix preinstall dir handling.
|
|
* bootloader/Makefile.am: Preinstall dirs.
|
|
* bootloader/Makefile.am: Fix up paths having been broken in
previous patch.
|
|
* bootloader/Makefile.am: Remove references to $(top_srcdir).
Remove NM, LD. Cosmetics.
|
|
* Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
Add PRE/TMPINSTALL_FILES to CLEANFILES.
* bootloader/Makefile.am: Ditto.
* irq/Makefile.am: Ditto.
* motorola/Makefile.am: Ditto.
* openpic/Makefile.am: Ditto.
* pci/Makefile.am: Ditto.
* start/Makefile.am: Ditto.
* startup/Makefile.am: Ditto.
* vectors/Makefile.am: Ditto.
* vme/Makefile.am: Ditto.
|
|
* bootloader/Makefile.am: Eliminate VPATH.
* clock/Makefile.am: Eliminate VPATH.
* console/Makefile.am: Eliminate VPATH.
* irq/Makefile.am: Eliminate VPATH.
* motorola/Makefile.am: Eliminate VPATH.
* openpic/Makefile.am: Eliminate VPATH.
* pci/Makefile.am: Eliminate VPATH.
* residual/Makefile.am: Eliminate VPATH.
* start/Makefile.am: Eliminate VPATH.
* startup/Makefile.am: Eliminate VPATH.
* vectors/Makefile.am: Eliminate VPATH.
* vme/Makefile.am: Eliminate VPATH.
|
|
* bootloader/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
* start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
* startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
|
|
* Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* bootloader/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* irq/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* motorola/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* openpic/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* pci/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* vectors/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* vme/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
|
|
* bootloader/Makefile.am: Misc cleanups and fixes.
* motorola/Makefile.am: Misc cleanups and fixes.
* start/Makefile.am: Misc cleanups and fixes.
* startup/Makefile.am: Misc cleanups and fixes.
* startup/linkcmds: Preparations for gcc-3.3.x.
|
|
* Makefile.am: Cosmetics.
* bootloader/Makefile.am: Cosmetics.
* startup/Makefile.am: Cosmetics.
|
|
* Makefile.am: Add preinstallation dirstamp support.
* bootloader/Makefile.am: Cosmetics.
* clock/Makefile.am: Cosmetics.
* console/Makefile.am: Cosmetics.
* irq/Makefile.am: Add preinstallation dirstamp support.
* motorola/Makefile.am: Cosmetics.
* openpic/Makefile.am: Cosmetics.
* pci/Makefile.am: Cosmetics.
* residual/Makefile.am: Cosmetics.
* start/Makefile.am: Cosmetics.
* startup/Makefile.am: Cosmetics.
* vectors/Makefile.am: Add preinstallation dirstamp support.
* vme/Makefile.am: Add preinstallation dirstamp support.
* wrapup/Makefile.am: Cosmetics.
|
|
Makefile.am: Reflect having moved automake.
bootloader/Makefile.am: Reflect having moved automake.
clock/Makefile.am: Reflect having moved automake.
console/Makefile.am: Reflect having moved automake.
include/Makefile.am: Reflect having moved automake.
irq/Makefile.am: Reflect having moved automake.
motorola/Makefile.am: Reflect having moved automake.
openpic/Makefile.am: Reflect having moved automake.
pci/Makefile.am: Reflect having moved automake.
residual/Makefile.am: Reflect having moved automake.
start/Makefile.am: Reflect having moved automake.
startup/Makefile.am: Reflect having moved automake.
vectors/Makefile.am: Reflect having moved automake.
vme/Makefile.am: Reflect having moved automake.
wrapup/Makefile.am: Reflect having moved automake.
|
|
* bootloader/Makefile.am: Eliminate EABI CFLAGS from those used to
compile the bootloader.
|
|
* bootloader/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* irq/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* motorola/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* openpic/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* pci/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* residual/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* vectors/Makefile.am: Don't include @RTEMS_BSP@.cfg.
|
|
* bootloader/Makefile.am: Fix that crappy Makefile.am once again.
|
|
* bootloader/Makefile.am: Use .$(OBJEXT) instead of .o.
* clock/Makefile.am: Use .$(OBJEXT) instead of .o.
* console/Makefile.am: Use .$(OBJEXT) instead of .o.
* irq/Makefile.am: Use .$(OBJEXT) instead of .o.
* motorola/Makefile.am: Use .$(OBJEXT) instead of .o.
* openpic/Makefile.am: Use .$(OBJEXT) instead of .o.
* pci/Makefile.am: Use .$(OBJEXT) instead of .o.
* residual/Makefile.am: Use .$(OBJEXT) instead of .o.
* start/Makefile.am: Use .$(OBJEXT) instead of .o.
* startup/Makefile.am: Use .$(OBJEXT) instead of .o.
* vectors/Makefile.am: Use .$(OBJEXT) instead of .o.
* wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
|
|
* bootloader/Makefile.am: Install bootloader.o.
Install bootloader/bootloader.ppcboot.lds.
|
|
* include/Makefile.am: Fix preinstallation.
* bootloader: Eliminate $(INCLUDES).
|
|
* bootloader/Makefile.am, console/Makefile.am, pci/Makefile.am:
Per PR216, "libbsp/powerpc/shared" BSP has been modified considerably
with the goal to make it more flexible and reusable by other
BSPs. The main strategies were:
- eliminate hardcoded base addresses; devices use offsets
and a BSP defined base address.
- separate functionality into different files (e.g. reboot from
inch.c to reboot.c) which can be overridden by a 'derived' BSP.
- separate initialization code into separate files (e.g. PCI
bridge detection/initialization was separated from the more
generic PCI access routines), also to make it easier for
'derived' BSPs to substitute their own initialization code.
There are also a couple of enhancements and fixes:
- IRQ handling code now has a hook for attaching a VME bridge.
- OpenPIC is now explicitely initialized (polarities, senses).
Eliminated the implicit assumption on the presence of an ISA PIC.
- UART and console driver now supports more than 1 port. The current
maximum of 2 can easily be extended by enlarging a table (it
would even be easier if the ISR API was not broken by design).
- fixed polled_io.c so it correctly supports console on COM2
- fixed TLB invalidation code (start.S).
- exception handler prints a stack backtrace.
- added BSP_pciFindDevice() to scan the pci bus for a particular
vendor/device/instance.
|
|
* bootloader/Makefile.am: Use automake-1.6 AS compilation rules.
|
|
* bootloader/Makefile.am: Use AM_CCASFLAGS instead of AM_ASFLAGS.
|
|
* configure.ac:
AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
AM_INIT_AUTOMAKE([no-define foreign 1.6]).
* bootloader/Makefile.am: Remove AUTOMAKE_OPTIONS.
* Makefile.am: Remove AUTOMAKE_OPTIONS.
* clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
* console/Makefile.am: Remove AUTOMAKE_OPTIONS.
* include/Makefile.am: Remove AUTOMAKE_OPTIONS.
* irq/Makefile.am: Remove AUTOMAKE_OPTIONS.
* motorola/Makefile.am: Remove AUTOMAKE_OPTIONS.
* openpic/Makefile.am: Remove AUTOMAKE_OPTIONS.
* pci/Makefile.am: Remove AUTOMAKE_OPTIONS.
* residual/Makefile.am: Remove AUTOMAKE_OPTIONS.
* start/Makefile.am: Remove AUTOMAKE_OPTIONS.
* startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
* vectors/Makefile.am: Remove AUTOMAKE_OPTIONS.
* wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
|
|
* bootloader/Makefile.am: completely reworked.
* configure.ac: Add AM_PROG_AS.
|
|
* include/Makefile.am: Use 'PREINSTALL_FILES ='.
* residual/Makefile.am: Use 'PREINSTALL_FILES ='.
* vectors/Makefile.am: Use 'PREINSTALL_FILES ='.
* pci/Makefile.am: Use 'PREINSTALL_FILES ='.
* openpic/Makefile.am: Use 'PREINSTALL_FILES ='.
* bootloader/Makefile.am: Use 'CLEANFILES ='.
|
|
* bootloader/Makefile.am: Modified to install bootloader so
make-exe rule can avoid writing to install point or assuming
BSP build tree is available.
|
|
* bootloader/Makefile.am, clock/Makefile.am, console/Makefile.am,
irq/Makefile.am, motorola/Makefile.am, openpic/Makefile.am,
pci/Makefile.am, residual/Makefile.am, start/Makefile.am,
startup/Makefile.am, vectors/Makefile.am, wrapup/Makefile.am:
Include compile.am
|
|
|
|
adds .cvsignore.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:
* Modifications, (minor) corrections, cleanups to most existing
Makefile.ams
* Adds automake support to all remaining BSPs which have not yet been
converted to automake.
* Makefile.am for all remaining wrapup/Makefile.ams
|
|
which converts the PowerPC BSPs to configuration and more automake.
* Besides adding partial automake support, rsp converting all powerpc
BSPs to make them compliant to the new configuration scheme, this patch
attempts to fix several configuration bugs in powerpc related Makefiles.
|
|
As part of this effort, the mpc750 libcpu code is now shared with the
ppc6xx.
|
|
As part of this effort, the mpc750 libcpu code is now shared with the
ppc6xx.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> which converted many
Makefile.in's to Makefile.am's. This added a lot of files.
|
|
The main topic is replacing the hard-coded values for HAS_MP and
HAS_RDBG in custom/*.cfg with per-bsp configuration-time autoconf checks
(This is the patch I had mentioned before earlier this week).
CHANGES
* HAS_MP removed from custom/*.cfg, replaced with configuration time
autoconf check
* HAS_RDBG removed from custom/*.cfg, replaced with configuration-time
autoconf check
* NEW: c/src/make/bsp.cfg.in, takes configuration-time checked per-bsp
values (i.e. HAS_MP, HAS_RDBG), gets installed as
$(prefix)/<bsp>/make/bsp.cfg
* NEW: default.cfg includes bsp.cfg - this change is backward
compatible.
* IMPORT_SRC: apply VPATH instead for ts_386ex/i386ex subdirectory
Makefile.ins
* HACK: a bug in acpolish mis-handles addtions to makefile variables
which are enclosed in gmake conditionals:
c/src/lib/libbsp/m68k/ods68302/start302/Makefile.in
* Apply inline_dir, HAS_MP and HAS_RDBG for avoiding configuration of
unneeded subdirectories in various configure.in files.
* Several minor changes in Makefile.ins and configure.ins, wrt. to the
order of including *.cfg and defining Makefile variables
APPLYING THE PATCH:
patch -p1 < rtems-rc-19990709-4.diff
./autogen
|
|
This file is necessary because the bootloader is compiled with different
options than the basic C library.
|