summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp/powerpc/beatnik (follow)
Commit message (Collapse)AuthorAgeFilesLines
* bsps: Fix TLS support in linker command filesSebastian Huber2014-04-221-1/+3
| | | | | The TLS section symbols had wrong values in case of an empty TLS data section and a nonempty TLS BSS section.
* bsps/powerpc: Fix linker command filesSebastian Huber2014-04-011-4/+2
|
* Change all references of rtems.com to rtems.org.Chris Johns2014-03-216-6/+6
|
* powerpc: Change interrupt disable implemetationSebastian Huber2014-02-191-5/+1
| | | | | | | | | | | | Instead of SPRG0 (= special purpose register 272) use the new global symbol _PPC_INTERRUPT_DISABLE_MASK to store the interrupt disable mask. The benefit is that it is now possible to disable interrupts without further run-time initialization in boot_card(). At least on Freescale e500 cores this leads also to a faster execution since the mfmsr and mfspr instruction require four cycles to complete. The instructions to load the mask value can execute while the mfmsr is in progress.
* score: Add CPU counter supportSebastian Huber2014-02-141-0/+4
| | | | | | | | | Add a CPU counter interface to allow access to a free-running counter. It is useful to measure short time intervals. This can be used for example to enable profiling of critical low-level functions. Add two busy wait functions rtems_counter_delay_ticks() and rtems_counter_delay_nanoseconds() implemented via the CPU counter.
* bsps: Thread-local storage (TLS) for linkcmdsSebastian Huber2014-02-041-0/+14
|
* Add warnings to MOTLoad-equipped BSPs' READMEs that a "waitProbe", "netShut" ↵Nick Withers2014-01-231-0/+5
| | | | sequence must be executed in MOTLoad before booting RTEMS to remove its network interface interrupt handlers, lest memory corruption occur
* beatnik: Move bsp_reset() to beatnik/startup/bspreset.cDaniel Ramirez2013-11-232-1/+1
|
* PR766: Delete __RTEMS_APPLICATION__Sebastian Huber2013-08-081-4/+0
| | | | This define is no longer used.
* beatnik/Makefile.am: Remove reference to ChangeLogJoel Sherrill2013-03-111-1/+1
|
* RTEMS: Delete ChangeLog files.Gedare Bloom2013-03-081-318/+0
| | | | | | | | | This commit deletes all RTEMS ChangeLog files. These files have been abandoned since converting to git version control. The historical data may be recovered by checking out any commit before this one. Most of the contents of these ChangeLog files can also be found in the git log. Two external ChangeLog files, ChangeLog.slac and ChangeLog.zlib, remain.
* score: rtems_initialize_start_multitasking()Sebastian Huber2012-12-071-7/+0
| | | | | | | | | Do not return from rtems_initialize_start_multitasking() and call rtems_fatal() instead with a fatal source of RTEMS_FATAL_SOURCE_EXIT and a fatal code with the exit status. Remove all bsp_cleanup() functions. The boot_card() is now a no return function.
* score: Add RTEMS_FATAL_SOURCE_EXITSebastian Huber2012-11-152-3/+13
| | | | | | | Include <bsp/default-initial-extension.h> in all BSPs. Call rtems_fatal() with RTEMS_FATAL_SOURCE_EXIT as source and the exit() status code as fatal code in every bsp_cleanup(). Move previous bsp_cleanup() code into bsp_fatal_extension().
* bsps: Include <bsp/bootcard.h>Sebastian Huber2012-11-141-0/+1
| | | | | Use <bsp/bootcard.h> to get prototype for bsp_cleanup(). Fix bsp_cleanup() definition if necessary.
* sapi: Delete duplicate declarationsSebastian Huber2012-11-071-7/+0
|
* sapi: Use rtems_configuration_get_work_space_sizeSebastian Huber2012-11-071-1/+4
|
* libnetworking: Use system eventsSebastian Huber2012-11-022-2/+2
| | | | | | | Add reserved system events RTEMS_EVENT_SYSTEM_NETWORK_SBWAIT and RTEMS_EVENT_SYSTEM_NETWORK_SOSLEEP. Add and use rtems_bsdnet_event_send().
* Revert "Add bspopts.h.in."Gedare Bloom2012-08-061-38/+0
| | | | | | | | | | | | This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb. Conflicts: c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in Manually deleted conflicting files.
* Use http://www.rtems.org/bugzilla as bug-URL.Ralf Corsépius2012-07-191-1/+1
|
* Remove CVS-Ids.Ralf Corsépius2012-07-192-4/+0
|
* Remove CVS-Ids.Ralf Corsépius2012-07-191-2/+0
|
* Require automake-1.12.2.Ralf Corsépius2012-07-191-1/+1
|
* Require autoconf-2.69.Ralf Corsépius2012-07-191-1/+1
|
* Fix C files which had two semi-colons at EOLJoel Sherrill2012-05-311-1/+1
|
* Add bspopts.h.in.Ralf Corsépius2012-05-241-0/+38
|
* Remove All CVS Id Strings Possible Using a ScriptJoel Sherrill2012-05-1125-43/+0
| | | | | | | | | | | | Script does what is expected and tries to do it as smartly as possible. + remove occurrences of two blank comment lines next to each other after Id string line removed. + remove entire comment blocks which only exited to contain CVS Ids + If the processing left a blank line at the top of a file, it was removed.
* Revert: Remove CVS IdsJoel Sherrill2012-05-071-0/+4
| | | | | See http://www.rtems.org/pipermail/rtems-devel/2012-May/001006.html for details.
* Remove CVS-Ids.Ralf Corsépius2012-05-041-4/+0
|
* Remove all .cvsignore files.Joel Sherrill2012-02-012-12/+0
|
* 2011-08-29 Joel Sherrill <joel.sherrilL@OARcorp.com>Joel Sherrill2011-08-293-28/+30
| | | | * Makefile.am, startup/bspstart.c: Formatting.
* 2011-07-13 Joel Sherrill <joel.sherrilL@OARcorp.com>Joel Sherrill2011-07-133-3/+15
| | | | | | | | PR 1824/cpukit * startup/bspclean.c, startup/bspstart.c: Return exit/shutdown status back to boot_card(). boot_card() propagates this to bsp_cleanup() and returns it to the assembly that started the application. bsp_cleanup() prototype changed.
* 2011-07-12 Joel Sherrill <joel.sherrilL@OARcorp.com>Joel Sherrill2011-07-122-1/+5
| | | | * make/custom/beatnik.cfg: Spacing.
* 2011-06-17 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-06-172-3/+5
| | | | | * Makefile.am: Remove "SUBDIRS = .". Remove "all-local:".
* 2011-06-07 Sebastian Huber <sebastian.huber@embedded-brains.de>Sebastian Huber2011-06-072-8/+9
| | | | * configure.ac: Use standard cache BSP options.
* 2011-05-18 Till Straumann <strauman@slac.stanford.edu>Till Straumann2011-05-183-2/+16
| | | | | | PR1797/bsps: Applied cleaned-up version of Kate's patch. CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK is now a 'bspopts.h' setting and as such configurable.
* 2011-05-16 Till Straumann <strauman@slac.stanford.edu>Till Straumann2011-05-162-0/+6
| | | | * include/bsp.h: define CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
* 2011-02-11 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-02-115-4/+10
| | | | | | * irq/discovery_pic.c, network/if_em/rtemscompat_defs.h, * network/if_gfe/rtemscompat_defs.h, startup/bspstart.c: Use "__asm__" instead of "asm" for improved c99-compliance.
* 2011-02-02 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-02-022-2/+6
| | | | * configure.ac: Require autoconf-2.68, automake-1.11.1.
* 2011-01-28 Joel Sherrill <joel.sherrilL@OARcorp.com>Joel Sherrill2011-01-283-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | * beatnik/include/bsp.h, beatnik/irq/irq.h, beatnik/pci/gt_pci_init.c, ep1a/console/polled_io.c, ep1a/irq/openpic_xxx_irq.c, gen5200/include/irq.h, gen5200/irq/irq.c, gen5200/startup/bspstart.c, haleakala/irq/irq.c, mbx8xx/irq/irq.c, mbx8xx/irq/irq.h, motorola_powerpc/include/bsp.h, mpc8260ads/irq/irq.c, mpc8260ads/irq/irq.h, mvme3100/include/bsp.h, mvme3100/irq/irq.h, mvme3100/start/start.S, mvme5500/include/bsp.h, mvme5500/irq/irq.h, psim/include/bsp.h, psim/include/coverhd.h, psim/irq/irq.h, psim/shmsupp/addrconv.c, psim/shmsupp/getcfg.c, psim/startup/linkcmds, psim/tools/psim-gdb-top.in, psim/tools/psim-top.in, psim/tools/runtest-top.in, qemuppc/irq/irq.h, score603e/irq/irq.c, shared/bootloader/bootldr.h, shared/bootloader/em86.c, shared/bootloader/em86real.S, shared/bootloader/exception.S, shared/bootloader/head.S, shared/bootloader/lib.c, shared/bootloader/misc.c, shared/bootloader/mm.c, shared/bootloader/pci.c, shared/console/console.c, shared/console/consoleIo.h, shared/console/inch.c, shared/console/keyboard.h, shared/console/polled_io.c, shared/irq/i8259.c, shared/irq/irq.h, shared/irq/openpic_i8259_irq.c, shared/motorola/motorola.c, shared/motorola/motorola.h, shared/openpic/openpic.c, shared/openpic/openpic.h, shared/pci/pci.c, shared/residual/residual.c, shared/start/start.S, ss555/irq/irq.h: Fix typo where license said found in found in.
* 2011-01-26 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-01-263-7/+6
| | | | | * Makefile.am: Remove build_date.c. * startup/bspstart.c: Remove BSP_build_date.
* 2011-01-26 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-01-264-5/+6
| | | | | * network/porting/README, network/porting/if_xxx_rtems.c, startup/bspstart.c: Remove CVS artefacts.
* 2010-09-29 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2010-09-292-2/+6
| | | | * Makefile.am: Remove -Wno-unused-variable.
* 2010-08-20 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill2010-08-202-1/+7
| | | | | PR 1682/bsps * startup/bspstart.c: Add BSP_poll_char.
* 2010-06-29 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill2010-06-292-4/+4
| | | | * configure.ac: Remove AC_CHECK_SIZEOF([void *]).
* 2010-06-29 Joel Sherrill <Joel.Sherrill@OARcorp.com>Jennifer Averett2010-06-292-0/+8
| | | | * configure.ac: Added AC_CHECK_SIZEOF macro.
* 2010-05-10 Joel Sherrill <joel.sherrilL@OARcorp.com>Joel Sherrill2010-05-102-0/+7
| | | | | * include/bsp.h: Do not include <bsp/bsp_bsdnet_attach.h> if networkign disabled.
* 2010-04-14 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2010-04-141-0/+4
| | | | * network/support/bsp_attach.c: Include <unistd.h>.
* Include <unistd.h>.Ralf Corsepius2010-04-141-0/+2
|
* removed warningsThomas Doerfler2010-03-273-5/+9
|
* 2010-02-09 Till Straumann <strauman@slac.stanford.edu>Till Straumann2010-02-102-4/+42
| | | | | | | | | | | | | | | | | | * network/if_mve/mv643xx_eth.c: Fixed alignment attribute in descriptor declaration. Not the pointers to the descriptors have to be aligned but the descriptors themselves (didn't cause problems but caused unnecessary holes in 'private' struct). FIX: Added more robustness when number of available TX descriptors drops to zero. (This can e.g., happen if the link goes bad causing packets to stall in the FIFO.) At the following points the transmitter is explicitly (re-)started: o when link comes up and number of available TXDs is zero the TX is restarted. o on a failed attempt to send data due to lack of TXDs the TX is restarted if swiping the TX ring doesn't yield any buffers (i.e., if the # of available buffers is still zero after the swipe).
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 19:53:39 +0000