| Commit message (Collapse) | Author | Files | Lines |
|---|
|
closes #2444.
|
|
Update #2408.
|
|
This was done by the following script run from libbsp:
find * -name bsp.h | xargs -e grep -l "#ifndef.*_BSP_H" | while read b
do
echo $b
cpu=`echo $b | cut -d'/' -f1 | tr '[:lower:]' '[:upper:]' `
bsp=`echo $b | cut -d'/' -f2 | tr '[:lower:]' '[:upper:]' `
g="LIBBSP_${cpu}_${bsp}_BSP_H"
# echo $g
sed -e "s/ifndef _BSP_H/ifndef ${g}/" \
-e "s/define _BSP_H/define ${g}/" \
-i $b
done
|
|
Only a few BSPs use this and it should not have been in libcsupport.
|
|
|
|
|
|
Some includes may use C++ and this conflicts if surrounded extern "C".
|
|
|
|
warning and clean up
|
|
This change starts with removing the effectively empty file
timerdrv.h. The prototypes for benchmark_timer_XXX() were in
btimer.h which was not universally used. Thus every use of
timerdrv.h had to be changed to btimer.h. Then the prototypes
for benchmark_timer_read() had to be adjusted to return
benchmark_timer_t rather than int or uint32_t.
I took this opportunity to also correct the file headers to
separate the copyright from the file description comments which
is needed to ensure the copyright isn't propagated into Doxygen
output.
|
|
With this patch the preinstall.am files are in a set order and not
dependent on now perl implements a hash.
|
|
Apparently, at some point automake output changed and these were
not updated.
|
|
The first pass at building these was without networking enabled.
This pass addresses that plus accounts for some new BSPs which
needed testsuite.tcfg files and BSPs which could not link tests
which had been added since the first pass.
|
|
The TLS section symbols had wrong values in case of an empty TLS data
section and a nonempty TLS BSS section.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This commit deletes all RTEMS ChangeLog files. These files have been abandoned
since converting to git version control. The historical data may be recovered
by checking out any commit before this one. Most of the contents of these
ChangeLog files can also be found in the git log.
Two external ChangeLog files, ChangeLog.slac and ChangeLog.zlib, remain.
|
|
Do not return from rtems_initialize_start_multitasking() and call
rtems_fatal() instead with a fatal source of RTEMS_FATAL_SOURCE_EXIT and
a fatal code with the exit status.
Remove all bsp_cleanup() functions. The boot_card() is now a no return
function.
|
|
Include <bsp/default-initial-extension.h> in all BSPs. Call
rtems_fatal() with RTEMS_FATAL_SOURCE_EXIT as source and the exit()
status code as fatal code in every bsp_cleanup(). Move previous
bsp_cleanup() code into bsp_fatal_extension().
|
|
Use <bsp/bootcard.h> to get prototype for bsp_cleanup(). Fix
bsp_cleanup() definition if necessary.
|
|
This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb.
Conflicts:
c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in
c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in
Manually deleted conflicting files.
|
|
|
|
|
|
|
|
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
|
See http://www.rtems.org/pipermail/rtems-devel/2012-May/001006.html
for details.
|
|
|
|
|
|
|
|
|
|
PR 1824/cpukit
* startup/bspclean.c: Return exit/shutdown status back to boot_card().
boot_card() propagates this to bsp_cleanup() and returns it to the
assembly that started the application. bsp_cleanup() prototype
changed.
|
|
* include/bsp.h, shmsupp/lock.c, startup/bspclean.c:
Use "__asm__" instead of "asm" for improved c99-compliance.
|
|
* timer/timer.c: Include <rtems/btimer.h>.
Fix benchmark_timer_read() definition.
|
|
* configure.ac: Require autoconf-2.68, automake-1.11.1.
|
|
* startup/bspclean.c: Remove warnings.
|
|
|
|
* make/custom/mvme136.cfg: Remove RTEMS_BSP_FAMILY.
|
|
* configure.ac: Don't add -ansi -fasm to CFLAGS.
|
|
* make/custom/mvme136.cfg: New (relocated from /make/custom).
|
|
* configure.ac: Remove RTEMS_BSP_BOOTCARD_OPTIONS.
|
|
* configure.ac: Rename BSP_BOOTCARD_OPTIONS to
RTEMS_BSP_BOOTCARD_OPTIONS. Add RTEMS_BSP_CLEANUP_OPTIONS so all BSPs
have the same options.
|
|
* bsp_specs: Move -e start from *link to *startfile to avoid warning
for undefined entry symbol when linking relocatables with binutils
2.19.
|
|
* timer/timer.c: Eliminate uses of old benchmark timer names.
|
|
* Makefile.am: Eliminate bsp.am. Build startup files as side-effect
of building libbspstart.a, using automake-rules.
|
|
* Makefile.am: Eliminate *_SOURCES.
|
