| Commit message (Collapse) | Author | Files | Lines |
|
Close #3250.
Close #4081.
|
|
This AC_CONFIG_SRCDIR() is just a sanity check in this insane build
system. Since all content of
c/src/lib/libbsp/@RTEMS_CPU@/@RTEMS_BSP_FAMILY@ is bound to be moved it
makes no sense to keep it.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
This option silences warning with automake-1.16.1 allowing us to
upgrade to that version.
This change has been tested with automake-1.12.6 and automake-1.16.1.
It seems version 1.16.1 configures slower than 1.12.6 for the same
source and BSP. The newer versions is 6 second slower.
Close #3387.
|
|
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
|
|
|
|
|
|
|
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
|
See http://www.rtems.org/pipermail/rtems-devel/2012-May/001006.html
for details.
|
|
|
|
* configure.ac: Require autoconf-2.68, automake-1.11.1.
|
|
|
|
* configure.ac: New BUG-REPORT address.
|
|
* configure.ac: Require autoconf-2.60. Require automake-1.10.
|
|
* Makefile.am: Merge-in shared/Makefile.am.
* ChangeLog: Merge-in shared/ChangeLog.
* configure.ac: Remove shared/Makefile.am.
|
|
|
|
* configure.ac: Require automake > 1.9.
|
|
* configure.ac: RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY]).
|
|
* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
|
|
* configure.ac: Remove shared/gdbstub/Makefile.
|
|
* acinclude.m4: Reflect changes to bootstrap.
* configure.ac: Remove RTEMS_CHECK_CUSTON_BSP.
|
|
* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
|
|
|
|
* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
|
|
* configure.ac: AC_PREREQ(2.57).
|
|
* configure.ac: Remove RTEMS_CHECK_BSP_CACHE.
|
|
* Thomas Doerfler <Thomas.Doerfler@imd-systems.de> added m68k
support to the shared gdb stub glue thus adding a directory.
* configure.ac: Modified to reflect above.
|
|
* configure.ac:
AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
AM_INIT_AUTOMAKE([no-define foreign 1.6]).
* Makefile.am: Remove AUTOMAKE_OPTIONS.
|
|
* .cvsignore: Add autom4te.cache for autoconf > 2.52.
* configure.in: Remove.
|
|
* .cvsignore: Add autom4te.cache for autoconf > 2.52.
* configure.in: Remove.
|
|
* .cvsignore: Add autom4te.cache for autoconf > 2.52.
* configure.in: Remove.
* configure.ac: New file, generated from configure.in by autoupdate.
|
|
that is another small step toward multilibs:
Changes:
* Eliminate RTEMS_CHECK_CUSTOM_BSP from all configure.ins below exec/
* Add RTEMS_CHECK_CUSTOM_BSP to the multilib-disabled branch in
RTEMS_ENV_RTEMSCPU to preserve the old per-BSP building scheme
functional.
Notes:
* --enable-multilibs is still non-functional
* This patch should not have any influence on the old building
scheme (--disable-multilib should silently fall back to the old
building scheme).
* running ./bootstrap is required after applying the patch
|
|
that is a somewhat experimental, multilib-related patch:
Changes:
* Use RTEMS_ENV_RTEMSCPU instead of RTEMS_ENV_RTEMSBSP in
configure.ins below exec/.
At the moment, RTEMS_ENV_RTEMSCPU is more or less an optical change
to emphasize that these subdirectories shall not depend on RTEMS_BSP
than a real behavioral change.
* Add AC_DEFINE_* to several aclocal/*.m4 macros to prepare
autoheader/autoconf generated targopts.h and similiar configuration
headers.
* c/src/configure.in: remove exec from cfg_subdirs if multilibs are
enabled (c/src is build per bsp, exec shall be build per cpu in c/
or from the toplevel in future, when multilibs are enabled.)
Notes:
* This patch should not have any impact on the current building scheme.
* --enable-multilib still does not work.
* running bootstrap from the toplevel directory is required.
CVS: ----------------------------------------------------------------------
CVS: Enter Log. Lines beginning with `CVS:' are removed automatically
CVS:
CVS: Committing in .
CVS:
CVS: Modified Files:
CVS: c/src/tests/libtests/termios/init.c
CVS: ----------------------------------------------------------------------
|
|
that contains:
* Removes remaining (now illegal) references to $(SRC) from a couple of
Makefile.ams
* Removes duplicate AC_CONFIG_SUBDIRS macro from c/configure.in
* Moves ENABLE_LIBCDIR into RTEMS_PROG_C[C|XX]_FOR_TARGET (hides LIBCDIR
from most configure scripts, i.e. LIBCDIR becomes less visible)
* Adds RTEMS_PROG_C[C|XX]_FOR_TARGET and RTEMS_CANONICALIZE_TOOLS to
libbsp/*/configure.ins (A minor bug in previous implementations, which
only has an impact when switching to GNU/Cygnus canonicalization)
* Cleans up several bogus comments.
* Removes MKLIB
* Switches the version number to 4.5.0 (for testing version number
handling)
|
|
that contains:
* cleanups to configuration files
* A reworked gccnewlib.spec.in: I have reformated it for enhanced
readability and added more rtems-base packages. It now should be free of
any installation conflicts (If there still remain some, they should be
regarded as bugs).
* A fix to the bin2boot RTEMS_BSP issue (make RTEMS_BSP="pc386 pc486"
now works).
* removes libbsp/bare/wrapup
* Further cleanups
|
|
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
|
|
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/i960/wrap
rm -rf c/src/exec/score/cpu/m68k/wrap
rm -rf c/src/exec/score/cpu/sh/wrap
rm -rf c/src/exec/score/cpu/sparc/wrap
rm -rf c/src/exec/score/cpu/unix/wrap
patch -p1 < rtems-rc-19991123-rc-1.diff
./bootstrap
Known bugs:
* "make debug|profile" in c/src/src/score/cpu/<RTEMS_CPU/Makefile does
not handle recursion to subdirectories correctly (recurses too often).
However, this issue is hardly visible and should be tolerable for the
moment.
|
|
The patch below actuallly consists of two patches:
1) moving librpc to c/src/librpc similar to what has been done to librtems++
2) reworked configure scripts, many safety and dependency checks added to
aclocal/*.m4 macros + configuration fixes.
To apply:
mkdir c/src/librpc
mkdir c/src/librpc/src
cp c/src/lib/librpc/*.c c/src/librpc/src
cp c/src/lib/librpc/Makefile.in c/src/librpc/src
mkdir c/src/librpc/include
mkdir c/src/librpc/include/rpc
cp c/src/lib/include/rpc/* c/src/librpc/include/rpc
patch -p1 < ../rtems-rc-19990820-7.diff
rm -rf c/src/lib/librpc
rm -rf c/src/lib/include/rpc
./autogen
The additional checks in aclocal/*m4 macros add rather restrictive, sometimes
unnecessarily restrictive constraints on the sequence of how macros can be
used in a configure.in script. Adding them has let my problems with some more
complicated configuration options vanish. Apparently some macros had not been
in the required order .
----
Now I still get some linking errors for some cpus and bsps, esp when linking
cdtest, but also at other locations:
e.g. this happens for mips64orion/p4600:
# make[5]: Entering directory
`/lfs/poseidon/users/rtems/src/multi/build/mips64orion-rtems/c/p4600/tests/samples/hello'
/opt/rtems/bin/mips64orion-rtems-gcc --pipe -B../../../../../../p4600/lib/
-specs bsp_specs -qrtems -DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
-mcpu=4600 -G0 -I../../../../../../p4600/lib/include/networking -g -Wall
-ansi -fasm -O4 -fomit-frame-pointer -o o-p4600/hello.exe
o-p4600/init.o ../../../../../../p4600/lib/no-dpmem.rel
../../../../../../p4600/lib/no-event.rel
../../../../../../p4600/lib/no-msg.rel ../../../../../../p4600/lib/no-mp.rel
../../../../../../p4600/lib/no-part.rel
../../../../../../p4600/lib/no-signal.rel
../../../../../../p4600/lib/no-timer.rel
../../../../../../p4600/lib/no-rtmon.rel
/opt/rtems/mips64orion-rtems/lib/libc.a(dtoa.o): In function `_dtoa_r':
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
collect2: ld returned 1 exit status
# mips64orion-rtems-gcc -v
Reading specs from /opt/rtems/lib/gcc-lib/mips64orion-rtems/2.95.1/specs
gcc version 2.95.1 19990816 (release)
# mips64orion-rtems-ld -v
GNU ld version 2.9.5 (with BFD 2.9.5)
|
|
The patch below actuallly consists of two patches:
1) moving librpc to c/src/librpc similar to what has been done to librtems++
2) reworked configure scripts, many safety and dependency checks added to
aclocal/*.m4 macros + configuration fixes.
To apply:
mkdir c/src/librpc
mkdir c/src/librpc/src
cp c/src/lib/librpc/*.c c/src/librpc/src
cp c/src/lib/librpc/Makefile.in c/src/librpc/src
mkdir c/src/librpc/include
mkdir c/src/librpc/include/rpc
cp c/src/lib/include/rpc/* c/src/librpc/include/rpc
patch -p1 < ../rtems-rc-19990820-7.diff
rm -rf c/src/lib/librpc
rm -rf c/src/lib/include/rpc
./autogen
The additional checks in aclocal/*m4 macros add rather restrictive, sometimes
unnecessarily restrictive constraints on the sequence of how macros can be
used in a configure.in script. Adding them has let my problems with some more
complicated configuration options vanish. Apparently some macros had not been
in the required order .
----
Now I still get some linking errors for some cpus and bsps, esp when linking
cdtest, but also at other locations:
e.g. this happens for mips64orion/p4600:
# make[5]: Entering directory
`/lfs/poseidon/users/rtems/src/multi/build/mips64orion-rtems/c/p4600/tests/samples/hello'
/opt/rtems/bin/mips64orion-rtems-gcc --pipe -B../../../../../../p4600/lib/
-specs bsp_specs -qrtems -DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
-mcpu=4600 -G0 -I../../../../../../p4600/lib/include/networking -g -Wall
-ansi -fasm -O4 -fomit-frame-pointer -o o-p4600/hello.exe
o-p4600/init.o ../../../../../../p4600/lib/no-dpmem.rel
../../../../../../p4600/lib/no-event.rel
../../../../../../p4600/lib/no-msg.rel ../../../../../../p4600/lib/no-mp.rel
../../../../../../p4600/lib/no-part.rel
../../../../../../p4600/lib/no-signal.rel
../../../../../../p4600/lib/no-timer.rel
../../../../../../p4600/lib/no-rtmon.rel
/opt/rtems/mips64orion-rtems/lib/libc.a(dtoa.o): In function `_dtoa_r':
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
/opt/hermes/embedded/build/build-mips64orion-tools/mips64orion-rtems/newlib/libc/stdlib/../../../../../src/newlib/libc/stdlib/dtoa.c:348: relocation truncated to fit: R_MIPS_LITERAL no symbol
collect2: ld returned 1 exit status
# mips64orion-rtems-gcc -v
Reading specs from /opt/rtems/lib/gcc-lib/mips64orion-rtems/2.95.1/specs
gcc version 2.95.1 19990816 (release)
# mips64orion-rtems-ld -v
GNU ld version 2.9.5 (with BFD 2.9.5)
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> which converted many
Makefile.in's to Makefile.am's. This added a lot of files.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de>".
|