| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Statically initialize the interrupt stack area
(_Configuration_Interrupt_stack_area_begin,
_Configuration_Interrupt_stack_area_end, and
_Configuration_Interrupt_stack_size) via <rtems/confdefs.h>. Place the
interrupt stack area in a special section ".rtemsstack.interrupt". Let
BSPs define the optimal placement of this section in their linker
command files (e.g. in a fast on-chip memory).
This change makes makes the CPU_HAS_SOFTWARE_INTERRUPT_STACK and
CPU_HAS_HARDWARE_INTERRUPT_STACK CPU port defines superfluous, since the
low level initialization code has all information available via global
symbols.
This change makes the CPU_ALLOCATE_INTERRUPT_STACK CPU port define
superfluous, since the interrupt stacks are allocated by confdefs.h for
all architectures. There is no need for BSP-specific linker command
file magic (except the section placement), see previous ARM linker
command file as a bad example.
Remove _CPU_Install_interrupt_stack(). Initialize the hardware
interrupt stack in _CPU_Initialize() if necessary (e.g.
m68k_install_interrupt_stack()).
The optional _CPU_Interrupt_stack_setup() is still useful to customize
the registration of the interrupt stack area in the per-CPU information.
The initialization stack can reuse the interrupt stack, since
* interrupts are disabled during the sequential system initialization,
and
* the boot_card() function does not return.
This stack resuse saves memory.
Changes per architecture:
arm:
* Mostly replace the linker symbol based configuration of stacks with
the standard <rtems/confdefs.h> configuration via
CONFIGURE_INTERRUPT_STACK_SIZE. The size of the FIQ, ABT and UND
mode stack is still defined via linker symbols. These modes are
rarely used in applications and the default values provided by the
BSP should be sufficient in most cases.
* Remove the bsp_processor_count linker symbol hack used for the SMP
support. This is possible since the interrupt stack area is now
allocated by the linker and not allocated from the heap. This makes
some configure.ac stuff obsolete. Remove the now superfluous BSP
variants altcycv_devkit_smp and realview_pbx_a9_qemu_smp.
bfin:
* Remove unused magic linker command file allocation of initialization
stack. Maybe a previous linker command file copy and paste problem?
In the start.S the initialization stack is set to a hard coded value.
lm32, m32c, mips, nios2, riscv, sh, v850:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
m68k:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
powerpc:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
* Used dedicated memory region (REGION_RTEMSSTACK) for the interrupt
stack on BSPs using the shared linkcmds.base (replacement for
REGION_RWEXTRA).
sparc:
* Remove the hard coded initialization stack. Use the interrupt stack
for the initialization stack on the boot processor. This saves
16KiB of RAM.
Update #3459.
|
|
|
|
|
|
|
|
|
|
| |
Use the standard ARMv7-M systick module for the ARMv7-M CPU counter
instead of DWT counter since the DWT counter is affected by power saving
states.
Use an inline function for _CPU_Counter_difference() for all ARM BSPs.
Update #3456.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
|
| |
Adjust various build files. Remove automatic generation of the
c/src/lib/libbsp/*/acinclude.m4 files from bootstrap script.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
|
|
|
| |
This AC_CONFIG_SRCDIR() is just a sanity check in this insane build
system. Since all content of
c/src/lib/libbsp/@RTEMS_CPU@/@RTEMS_BSP_FAMILY@ is bound to be moved it
makes no sense to keep it.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
| |
Adjust build support files to new directory layout.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
Use RTEMS_SYSINIT_ITEM() instead.
Update #2408.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
| |
The subdir-objects do not work currently due to BSP sources in bsps and
c and the existing build tree layout.
Update #3387.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
| |
This was used by the not supported "make dist".
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
|
|
|
| |
This option silences warning with automake-1.16.1 allowing us to
upgrade to that version.
This change has been tested with automake-1.12.6 and automake-1.16.1.
It seems version 1.16.1 configures slower than 1.12.6 for the same
source and BSP. The newer versions is 6 second slower.
Close #3387.
|
|
|
|
|
| |
A "make distclean" is not supported. So, it makes no sense to have pure
"make distclean" related stuff in the Makefile.am.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
|
|
| |
Provide HAS_NETWORKING and HAS_SMP Automake conditionals for all BSPs.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
|
| |
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
|
|
|
| |
A "make dist" is not supported. So, it makes no sense to have pure "make
dist" related stuff in the Makefile.am.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous cache manager support used a single souce file
(cache_manager.c) which included an implementation header (cache_.h).
This required the use of specialized include paths to find the right
header file. Change this to include a generic implementation header
(cacheimpl.h) in specialized source files.
Use the following directories and files:
* bsps/shared/cache
* bsps/@RTEMS_CPU@/shared/cache
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILY/start/cache.c
Update #3285.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
|
|
|
| |
Update #3254.
|
|
|
|
|
|
|
|
|
|
| |
This makes it possible to easily use
EXTRA_DIST += foobar
in fragments.
Update #3254.
|
|
|
|
| |
Update #3254.
|
|
|
|
| |
Updates #3520.
|
|
|
|
| |
Update #3254.
|
|
|
|
| |
Updates #3520.
|
|
|
|
| |
Updates #3250.
|
|
|
|
|
|
|
| |
This header file contained timing overhead values which are hard to
maintain.
Update #3254.
|
|
|
|
|
|
|
|
|
| |
Remove BSP-specific defaults for RTEMS_BSP_CLEANUP_OPTIONS to simplify
the BSP configuration and documentation. Change defaults to:
BSP_PRESS_KEY_FOR_RESET=0
BSP_RESET_BOARD_AT_EXIT=1
BSP_PRINT_EXCEPTION_CONTEXT=1
|
|
|
|
| |
Update #3239.
|
|
|
|
|
|
|
|
| |
The BSP_output_char should output a char and not mingle with high level
processing, e.g. '\n' to '\r\n' translation. Move this translation to
rtems_putc(). Remove it from all the BSP_output_char implementations.
Close #3122.
|
|
|
|
| |
Closes #2775.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BSPs.
The original ARM architecture wide cache_.h is changed to dummy version
for targets not implementing/enablig cache at all.
The ARM targets equipped by cache should include
appropriate implementation.
Next options are available for now
c/src/lib/libbsp/arm/shared/armv467ar-basic-cache/cache_.h
basic ARM cache integrated on the CPU core directly
which requires only CP15 oparations
c/src/lib/libbsp/arm/shared/arm-l2c-310/cache_.h
support for case where ARM L2C-310 cache controller
is used. It is accessible as mmaped peripheral.
c/src/lib/libbsp/arm/shared/armv7m/include/cache_.h
Cortex-M specific cache support
|