| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Here is the result of my nightly work to get RTEMS_ROOT=$srcdir working
with different shells and relative/absolute paths.
What I did is relatively simple in principle:
Instead of setting RTEMS_ROOT in configure.in and then let configure
substitute @RTEMS_ROOT@ inside the Makefiles, I now let each Makefile
set RTEMS_ROOT from each Makefile's @top_srcdir@ value.
The difference is subtile, but with enormous side effects:
- If RTEMS_ROOT is set in configure, then the same single value will be
propagated to all Makefiles. This breaks using relative paths, as the
relative path to the root of the source tree is used inside of all
subdirectory Makefiles.
- Now each Makefile.in sets RTEMS_ROOT = @top_srcdir@. top_srcdir is
computed individually by configure for each single Makefile.in, hereby
receiving the correct value, no matter if relative or absolute paths are
used.
To get this working, I needed to remove setting RTEMS_ROOT from
target.cfg.in, because this overrides the value of RTEMS_ROOT from each
individual Makefile.
Furthermore, I removed RTEMS_CUSTOM from the Makefiles and replaced all
"include $(RTEMS_CUSTOM)" directives with"include
$(RTEMS_ROOT)/make/custom/$(RTEMS_BSP)". Perhaps you don't like this,
but I think, to have one variable less is clearer and easier to
understand than having several variables refering to the next one.
I enclose a small patch to this mail, which
- fixes the config.h problem (to finally clearify misunderstands)
- removes assignment/subsitution of RTEMS_ROOT from configure.in
- contains a workaround for the application Makefile's RTEMS_ROOT
problem (reported by Eric)
- removes some unused lines from the toplevel Makefile.in
- removes assignment of RTEMS_ROOT from make/target.cfg.in
|
|
|
|
|
|
any directory in the build tree. The only variable which must be set
before the command "gmake" is invoked is RTEMS_BSP (e.g. RTEMS_BSP=erc32).
|
|
|
|
to lib/include.
Went to using a PROJECT_INCLUDE variable.
|
|
of switching to the modified GNU GPL.
|
|
GNU autoconf. This is the first large step in allowing an RTEMS
user to perform a one-tree build (per crossgcc FAQ) including RTEMS
in the build process. With this change RTEMS is configured in
built in the same style as the GNU tools, yet retains the basic
structure of its traditional Makefiles (ala Tony Bennett).
Jiri Gaisler (jgais@wd.estec.esa.nl) deserves (and received)
a big thank you for doing this.
There are still issues to be resolved but as of this commit, all target
which can be built on a linux host have been using a modified version
of the source Jiri submitted. This source was merged and most targets
built in the tree before this commit.
There are some issues which remain to be resolved but they are primarily
related to host OS dependencies, script issues, the use of gawk
for hack_specs, and the dependence on gcc snapshots. These will
be resolved.
|
|
as the sole statement in an if or else statement
|
|
|
|
|
|
Handler could timestamp the starting and stopping of timers. Since
TOD is built on top of Watchdog, this avoided a circular dependency.
|
|
|
|
the inline implementation. The impetus for this was twofold. First,
it is incorrect to have static inline prototypes when using the macro
implementation. Second, this reduced the number of lines in the include
files seen by rtems.h by about 2000 lines.
Next we restricted visibility for the inline routines to inside the
executive itself EXCEPT for a handful of objects. This reduced the
number of include files included by rtems.h by 40 files and reduced
the lines in the include files seen by rtems.h by about 6000 lines.
In total, these reduced the compile time of the entire RTEMS tree by 20%.
This results in about 8 minutes savings on the SparcStation 10 morgana.
|
|
the thread handler (IDLE), MPCI object (SYSI now MP Receive)
and initialize_executive_early (IO initialization). The SYSI task
no longer exists in a single processor configuration. This reduces
single processor Workspace requirements by a TCB and a stack which
is often larger than the minimum stack size. Moving the IO initialization
plus accompanying BSP hooks eliminated an initialization ordering problem
in which a global task could be created before the MPCI was initialized.
|
|
in each thread which must be set when the post switch extension is to be run.
|
|
|
|
|
|
partially recovered working tree, etc
|
|
|
|
|
|
|
|
|
|
|
|
single biggest changes were the expansion of the workspace size
macro to include other types of objects and the increase in the
minimum stack size for most CPUs.
|
|
Configuration Table Template file added and all tests
modified to use this. All gvar.h and conftbl.h files
removed from test directories.
Configuration parameter maximum_devices added.
Core semaphore and mutex handlers added and RTEMS API Semaphore
Manager updated to reflect this.
Initialization sequence changed to invoke API specific initialization
routines. Initialization tasks table now owned by RTEMS Tasks Manager.
Added user extension for post-switch.
Utilized user extensions to implement API specific functionality
like signal dispatching.
Added extensions to the System Initialization Thread so that an
API can register a function to be invoked while the system
is being initialized. These are largely equivalent to the
pre-driver and post-driver hooks.
Added the Modules file oar-go32_p5, modified oar-go32, and modified
the file make/custom/go32.cfg to look at an environment varable which
determines what CPU model is being used.
All BSPs updated to reflect named devices and clock driver's IOCTL
used by the Shared Memory Driver. Also merged clock isr into
main file and removed ckisr.c where possible.
Updated spsize to reflect new and moved variables.
Makefiles for the executive source and include files updated to show
break down of files into Core, RTEMS API, and Neither.
Header and inline files installed into subdirectory based on whether
logically in the Core or a part of the RTEMS API.
|
|
Rearranged code to created thread handler routines to initialize,
start, restart, and "close/delete" a thread.
Made internal threads their own object class. This now uses the
thread support routines for starting and initializing a thread.
Insured deleted tasks are freed to the Inactive pool associated with the
correct Information block.
Added an RTEMS API specific data area to the thread control block.
Beginnings of removing the word "rtems" from the core.
|
|
both fixed length "raw" names and strings from the API's point of view.
Both inline and macro implementations were tested.
|
|
(andy@i-cubed.demon.co.uk). This initial submission is known
to work on the IBM 403. It is thought to work on the Motorola
601, 603, and 604 although this remains to be tested.
Another user -- Doug Currie (e@flavors.com) -- is interested in
this work and will be testing it on the 604 using the Metrowerks
C compiler and a different format assembly language.
|
|
+ Added name pointer to Object_Control.
+ Modified Object Open and Close to address name field.
+ Removed name as separate element from Thread and Proxy Control.
|
|
|
|
|
