| Commit message (Collapse) | Author | Files | Lines |
|---|
|
A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.
This has at least seven problems:
* The make preinstall step itself needs time and disk space.
* Errors in header files show up in the build tree copy. This makes it
hard for editors to open the right file to fix the error.
* There is no clear relationship between source and build tree header
files. This makes an audit of the build process difficult.
* The visibility of all header files in the build tree makes it
difficult to enforce API barriers. For example it is discouraged to
use BSP-specifics in the cpukit.
* An introduction of a new build system is difficult.
* Include paths specified by the -B option are system headers. This
may suppress warnings.
* The parallel build had sporadic failures on some hosts.
This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.
The new cpukit include directories are:
* cpukit/include
* cpukit/score/cpu/@RTEMS_CPU@/include
* cpukit/libnetworking
The new BSP include directories are:
* bsps/include
* bsps/@RTEMS_CPU@/include
* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include
There are build tree include directories for generated files.
The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.
The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.
Update #3254.
|
|
Update #3254.
|
|
|
|
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
|
|
|
|
|
* clock/ckinit.c, include/io_types.h, include/iosh7045.h,
include/ispsh7045.h, include/sci.h, include/sci_termios.h,
include/sh7_pfc.h, include/sh7_sci.h, sci/sci.c, sci/sci_termios.c,
score/cpu_asm.c, score/ispsh7045.c, timer/timer.c: URL for license
changed.
|
|
which cleans up and merges some Hitachi SH-2 modifications from
John Mills <jmills@tga.com>.
|
|
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:
Changes:
------
1. SH-Port:
* Many files renamed.
* CONSOLE_DEVNAME and MHZ defines removed from libcpu.
* console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console
applying VPATH.
* CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
* MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
* -DHZ=HZ used in bspstart.c, only
* Makefile variable HZ used in bsp-dependent directories only.
2. SH1-Port
* clock-driver rewritten to provide better resolution for odd CPU
frequencies. This driver is only partially tested on hardware, ie.
sightly experimental, but I don't expect severe problems with it.
* Polling SCI-driver added. This driver is experimental and completly
untested yet. Therefore it is not yet used for the console (/dev/console
is still pointing to /dev/null, cf. gensh1/bsp.h).
* minor changes to the timer driver
* SH1 specific delay()/CPU_delay() now is implemented as a function
3. SH2-Port
* Merged
* IMO, the code is still in its infancy. Therefore I have interspersed
comments (FIXME) it for items which I think John should look after.
* sci and console drivers partially rewritten and extended (John, I hope
you don't mind).
* Copyright notices are not yet adapted
|
