rtems - RTEMS Kernel, file-systems, drivers, BSPs, samples, and testsuite.

	Commit message (Collapse)	Author	Files	Lines
2021-05-02	bsps: Support RTEMS_NOINIT in linkcmds	Sebastian Huber	1	-0/+4
	Update #3866.
2019-03-08	bsps: Adjust shared Doxygen groups	Sebastian Huber	1	-2/+2
	Update #3706.
2018-07-25	bsps/riscv: Update linker-symbols.h	Sebastian Huber	1	-15/+16
	Update #3433.
2018-07-25	riscv: Rework exception handling	Sebastian Huber	1	-4/+0
	Remove _CPU_ISR_install_raw_handler() and _CPU_ISR_install_vector() functions. Applications can install an exception handler via the fatal error handler to handle synchronous exceptions. Handle interrupt exceptions via _RISCV_Interrupt_dispatch() which must be provided by the BSP. Update #3433.
2018-06-19	bsps: Remove superfluous bsp_processor_count	Sebastian Huber	1	-2/+0
	This is unused copy and paste stuff. Update #3459.
2018-01-25	Remove make preinstall	Chris Johns	1	-0/+0
	A speciality of the RTEMS build system was the make preinstall step. It copied header files from arbitrary locations into the build tree. The header files were included via the -Bsome/build/tree/path GCC command line option. This has at least seven problems: * The make preinstall step itself needs time and disk space. * Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error. * There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult. * The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit. * An introduction of a new build system is difficult. * Include paths specified by the -B option are system headers. This may suppress warnings. * The parallel build had sporadic failures on some hosts. This patch removes the make preinstall step. All installed header files are moved to dedicated include directories in the source tree. Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc, etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g. erc32, imx, qoriq, etc. The new cpukit include directories are: * cpukit/include * cpukit/score/cpu/@RTEMS_CPU@/include * cpukit/libnetworking The new BSP include directories are: * bsps/include * bsps/@RTEMS_CPU@/include * bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include There are build tree include directories for generated files. The include directory order favours the most general header file, e.g. it is not possible to override general header files via the include path order. The "bootstrap -p" option was removed. The new "bootstrap -H" option should be used to regenerate the "headers.am" files. Update #3254.
2017-11-01	bsp: Make riscv_generic work for both riscv32 and riscv64 - v2	Hesham Almatary	1	-0/+0
	Update #3109
2017-10-28	bsp: Add new riscv_generic bsp v3	Hesham Almatary	1	-7/+7
	* Only runs/tested on simulator/spike. * Ticker, hello, capture work proprely * Tested via RTEMS Tester, Passed: 525/565 (92%) Update #3109
2015-05-21	Epiphany: Add the first epiphany_sim BSP v4	Hesham ALMatary	1	-5/+7
	This BSP in intended to run on the simulator that should be built from RSB. When building RTEMS for Epiphany --disable-networking must be provided part of the configure command.
2014-08-20	Add new (first) OpenRISC BSP called or1ksim.	Hesham ALMatary	1	-0/+79
	This BSP is intended to run on or1ksim (the main OpenRISC emulator). Fixed version according to Joel comments from the mailing list.