| Commit message (Collapse) | Author | Files | Lines |
|
Sort the .noinit* input sections by name first, then by alignment if two
sections have the same name. This allows the placement of begin/end symbols to
initialize some areas with a special value.
Update #4678.
|
|
Update #3866.
|
|
Update #3838.
|
|
Statically initialize the interrupt stack area
(_Configuration_Interrupt_stack_area_begin,
_Configuration_Interrupt_stack_area_end, and
_Configuration_Interrupt_stack_size) via <rtems/confdefs.h>. Place the
interrupt stack area in a special section ".rtemsstack.interrupt". Let
BSPs define the optimal placement of this section in their linker
command files (e.g. in a fast on-chip memory).
This change makes makes the CPU_HAS_SOFTWARE_INTERRUPT_STACK and
CPU_HAS_HARDWARE_INTERRUPT_STACK CPU port defines superfluous, since the
low level initialization code has all information available via global
symbols.
This change makes the CPU_ALLOCATE_INTERRUPT_STACK CPU port define
superfluous, since the interrupt stacks are allocated by confdefs.h for
all architectures. There is no need for BSP-specific linker command
file magic (except the section placement), see previous ARM linker
command file as a bad example.
Remove _CPU_Install_interrupt_stack(). Initialize the hardware
interrupt stack in _CPU_Initialize() if necessary (e.g.
m68k_install_interrupt_stack()).
The optional _CPU_Interrupt_stack_setup() is still useful to customize
the registration of the interrupt stack area in the per-CPU information.
The initialization stack can reuse the interrupt stack, since
* interrupts are disabled during the sequential system initialization,
and
* the boot_card() function does not return.
This stack resuse saves memory.
Changes per architecture:
arm:
* Mostly replace the linker symbol based configuration of stacks with
the standard <rtems/confdefs.h> configuration via
CONFIGURE_INTERRUPT_STACK_SIZE. The size of the FIQ, ABT and UND
mode stack is still defined via linker symbols. These modes are
rarely used in applications and the default values provided by the
BSP should be sufficient in most cases.
* Remove the bsp_processor_count linker symbol hack used for the SMP
support. This is possible since the interrupt stack area is now
allocated by the linker and not allocated from the heap. This makes
some configure.ac stuff obsolete. Remove the now superfluous BSP
variants altcycv_devkit_smp and realview_pbx_a9_qemu_smp.
bfin:
* Remove unused magic linker command file allocation of initialization
stack. Maybe a previous linker command file copy and paste problem?
In the start.S the initialization stack is set to a hard coded value.
lm32, m32c, mips, nios2, riscv, sh, v850:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
m68k:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
powerpc:
* Remove magic linker command file allocation of initialization stack.
Reuse interrupt stack for initialization stack.
* Used dedicated memory region (REGION_RTEMSSTACK) for the interrupt
stack on BSPs using the shared linkcmds.base (replacement for
REGION_RWEXTRA).
sparc:
* Remove the hard coded initialization stack. Use the interrupt stack
for the initialization stack on the boot processor. This saves
16KiB of RAM.
Update #3459.
|
|
Use a dedicated memory region or place it between the BSS and workspace.
Update #3459.
|
|
Adjust build support files to new directory layout.
This patch is a part of the BSP source reorganization.
Update #3285.
|
|
Updates #3520.
|
|
Update #2408.
|
|
The TLS section symbols had wrong values in case of an empty TLS data
section and a nonempty TLS BSS section.
|
|
|
|
PR 1781/bsps
* ChangeLog, Makefile.am, README, bsp_specs, configure.ac,
preinstall.am, times, console/console.c, include/bsp.h,
include/cplb.h, include/tm27.h, make/custom/TLL6527M.cfg,
startup/bspstart.c, startup/linkcmds: New files.
Initial port for the TLL6527Mboard that contains blackfin 52X
range of processors. Used eZKit533 as a reference for building
the port.
|
|
* Makefile.am, startup/linkcmds: Use top level shared
bsp_get_work_area() implementation.
|
|
* Makefile.am, configure.ac, startup/bspstart.c, startup/linkcmds:
Split out bsp_get_work_area() into its own file and user BSP
Framework to perform more initialization.
|
|
* startup/linkcmds: Add wildcard to gcc_except_table section so
programs compiled with gcc 4.3.x can link.
|
|
* preinstall.am, startup/bspstart.c, startup/linkcmds: Complete earlier
patch.
* include/cplb.h: New file.
|
|
* startup/linkcmds: Use___start_set_sysctl_set, ___stop_set_sysctl_set
instead of __start_set_sysctl_set, __stop_set_sysctl_set
(bfin uses '_' prefixed c-symbols.)
|
|
* startup/linkcmds: Put .fini into sdram.
Add __edata, __etext.
|
|
* bfin/ChangeLog, bfin/Makefile.am, bfin/acinclude.m4,
bfin/configure.ac, bfin/eZKit533/.cvsignore, bfin/eZKit533/ChangeLog,
bfin/eZKit533/Makefile.am, bfin/eZKit533/README,
bfin/eZKit533/bsp_specs, bfin/eZKit533/configure,
bfin/eZKit533/configure.ac, bfin/eZKit533/preinstall.am,
bfin/eZKit533/times, bfin/eZKit533/console/console-io.c,
bfin/eZKit533/include/.cvsignore, bfin/eZKit533/include/bsp.h,
bfin/eZKit533/include/bspopts.h.in, bfin/eZKit533/include/coverhd.h,
bfin/eZKit533/include/tm27.h, bfin/eZKit533/startup/bspstart.c,
bfin/eZKit533/startup/linkcmds, bfin/shared/clock/clockdrv.c,
bfin/shared/clock/rtc.c, bfin/shared/clock/tod.h,
bfin/shared/console/console.c, bfin/shared/start/start.S,
bfin/shared/timer/timer.c: New files.
|