diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/update/configure | 92 | ||||
| -rw-r--r-- | tools/update/configure.in | 1 |
2 files changed, 72 insertions, 21 deletions
diff --git a/tools/update/configure b/tools/update/configure index a90a59a561..b2cb7845f5 100644 --- a/tools/update/configure +++ b/tools/update/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -554,12 +557,8 @@ fi RTEMS_TOPdir="../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:563: checking for RTEMS Version" >&5 +echo "configure:562: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -571,9 +570,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Make sure we can run config.sub. @@ -582,7 +578,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:586: checking host system type" >&5 +echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -615,7 +611,7 @@ echo "$ac_t""$host" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:619: checking for a BSD compatible install" >&5 +echo "configure:615: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -668,7 +664,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:672: checking whether build environment is sane" >&5 +echo "configure:668: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -725,7 +721,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:729: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:725: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -764,7 +760,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:768: checking for working aclocal" >&5 +echo "configure:764: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -777,7 +773,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:781: checking for working autoconf" >&5 +echo "configure:777: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -790,7 +786,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:794: checking for working automake" >&5 +echo "configure:790: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -803,7 +799,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:807: checking for working autoheader" >&5 +echo "configure:803: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -816,7 +812,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:820: checking for working makeinfo" >&5 +echo "configure:816: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -829,6 +825,29 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:830: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + for ac_prog in bash ksh sh @@ -836,7 +855,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:840: checking for $ac_word" >&5 +echo "configure:859: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -881,7 +900,7 @@ fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:885: checking for $ac_word" >&5 +echo "configure:904: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -931,8 +950,27 @@ else fi +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + # tooldir='$(exec_prefix)/'$target_alias # Temporary work-around until building in source tree is supported + + tooldir='$(PROJECT_ROOT)' @@ -945,6 +983,11 @@ project_libdir='$(tooldir)/lib$(MULTISUBDIR)' project_bindir='$(tooldir)/bin' +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1092,8 +1135,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1110,14 +1151,23 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@KSH@%$KSH%g s%@PERL@%$PERL%g s%@PERL_TRUE@%$PERL_TRUE%g s%@PERL_FALSE@%$PERL_FALSE%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g s%@tooldir@%$tooldir%g s%@project_includedir@%$project_includedir%g s%@project_libdir@%$project_libdir%g s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/tools/update/configure.in b/tools/update/configure.in index b270d7fef2..23a86f8b7e 100644 --- a/tools/update/configure.in +++ b/tools/update/configure.in @@ -10,6 +10,7 @@ RTEMS_TOP(../..) AC_CANONICAL_HOST AM_INIT_AUTOMAKE(rtems-update-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE RTEMS_PATH_KSH RTEMS_PATH_PERL |