diff options
Diffstat (limited to '')
6 files changed, 0 insertions, 6 deletions
diff --git a/spec/build/bsps/powerpc/mpc8260ads/abi.yml b/spec/build/bsps/powerpc/mpc8260ads/abi.yml index 1edd63c17d..16cd990e10 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/abi.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/abi.yml @@ -12,7 +12,6 @@ default: - -mstrict-align - -meabi - -msdata=sysv -default-by-family: [] default-by-variant: [] description: | ABI flags diff --git a/spec/build/bsps/powerpc/mpc8260ads/optconminor.yml b/spec/build/bsps/powerpc/mpc8260ads/optconminor.yml index ba36484e38..50755157e9 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optconminor.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optconminor.yml @@ -6,7 +6,6 @@ build-type: option copyrights: - Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) default: SCC2_MINOR -default-by-family: [] default-by-variant: [] description: | (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device will be registered as /dev/console. diff --git a/spec/build/bsps/powerpc/mpc8260ads/optdisphandstat.yml b/spec/build/bsps/powerpc/mpc8260ads/optdisphandstat.yml index 6ba4ffbdb2..b7bcab4e5c 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optdisphandstat.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optdisphandstat.yml @@ -6,7 +6,6 @@ build-type: option copyrights: - Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) default: false -default-by-family: [] default-by-variant: [] description: | used by irq/irq.c diff --git a/spec/build/bsps/powerpc/mpc8260ads/optprintkminor.yml b/spec/build/bsps/powerpc/mpc8260ads/optprintkminor.yml index f4769ace9e..bb031dfa83 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optprintkminor.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optprintkminor.yml @@ -6,7 +6,6 @@ build-type: option copyrights: - Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) default: SMC2_MINOR -default-by-family: [] default-by-variant: [] description: | (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device is used for output by printk(). If the port that printk() uses is also used for other I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should use the same type of I/O, otherwise the drivers will likely conflict with each other. diff --git a/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml b/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml index d8a0b6a013..eb0d9d8bda 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml @@ -6,7 +6,6 @@ build-type: option copyrights: - Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) default: false -default-by-family: [] default-by-variant: [] description: | (BSP--console driver) Define to 0 or 1 if you want polled I/O performed by RTEMS. Define to 1 if you want interrupt-driven performed by RTEMS. Define to 2 if you want polled I/O performed by EPPCBug. There is no provision to have a mix of interrupt-driven and polled I/O ports, except that the printk port may use a different mode from the other ports. If this is done, do not open the printk port from an RTEMS application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR must be set to SMC1_MINOR. This is a deficiency of the firmware: it does not perform serial I/O on any port other than its default debug port, which must be SMC1. diff --git a/spec/build/bsps/powerpc/mpc8260ads/optuartsterm.yml b/spec/build/bsps/powerpc/mpc8260ads/optuartsterm.yml index 66b5c2920b..1aa2122c24 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optuartsterm.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optuartsterm.yml @@ -6,7 +6,6 @@ build-type: option copyrights: - Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) default: false -default-by-family: [] default-by-variant: [] description: | Define to 1 if you want termios support for every port. Termios support is independent of the choice of UART I/O mode. |