diff options
Diffstat (limited to 'make/custom/p4650.cfg')
| -rw-r--r-- | make/custom/p4650.cfg | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/make/custom/p4650.cfg b/make/custom/p4650.cfg new file mode 100644 index 0000000000..cc3877f5e2 --- /dev/null +++ b/make/custom/p4650.cfg @@ -0,0 +1,108 @@ +# +# Config file for the algorithmics p4000 evaluation board with R4650 cpu +# +# $Id$ +# + +include $(RTEMS_ROOT)/make/custom/default.cfg + +RTEMS_CPU=mips64orion +RTEMS_CPU_MODEL=R4650 + +# This is the actual bsp directory used during the build process. +RTEMS_BSP_FAMILY=p4000 + +CPU_CFLAGS=-m4650 -G0 +CCMIPS_CFLAGS_CPU=-cpu=r4650 + +# Override default start file +START_BASE=idt_csu + +CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3 + +# The p4600 and p4600 share the p4000 bsp. +TARGET_ARCH=o-p4650 +RTEMS_BSP=p4000 + +## Target compiler config file, if any +CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg + +# This target does NOT support the KA9Q TCP/IP stack so ignore requests +# to enable it. +HAS_KA9Q=no + +# This section makes the target dependent options file. + +# NDEBUG (C library) +# if defined asserts do not generate code. This is commonly used +# as a command line option. +# +# RTEMS_TEST_NO_PAUSE (RTEMS tests) +# do not pause between screens of output in the rtems tests +# +# STACK_CHECKER_ON (RTEMS support code) +# If defined, stack bounds checking is enabled. +# +# STACK_CHECKER_REPORT_USAGE (RTEMS support code) +# If this and STACK_CHECKER_ON are defined, then a report on stack usage +# per task is printed when the program exits. +# +# RTEMS_DEBUG (RTEMS) +# If defined, debug checks in RTEMS and support library code are enabled. +# +# WORKSPACE_MB (p4000) +# Defines the size in Megabytes of the RTEMS Workspace. +# +# HEAPSPACE_MB (p4000) +# Defines the size in Megabytes of the C Program Heap. + +define make-target-options + @echo "/* #define NDEBUG 1 */ " >>$@ + @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@ + @echo "/* #define STACK_CHECKER_ON 1 */" >>$@ + @echo "/* #define STACK_CHECKER_REPORT_USAGE 1 */" >>$@ + @echo "/* #define RTEMS_DEBUG 1 */" >>$@ + @echo "#define WORKSPACE_MB 2" >>$@ + @echo "#define HEAPSPACE_MB 1" >>$@ +endef + + +# optimize flag: typically -0, could use -O4 or -fast +# -O4 is ok for RTEMS +CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer + +# The following are definitions of make-exe which will work using ld as +# is currently required. It is expected that as of gcc 2.8, the end user +# will be able to override parts of the compilers specs and link using gcc. + +ifeq ($(RTEMS_USE_GCC272),yes) +# This rule was used in 3.6.0 +# $(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \ +# -T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_FILES) $(LD_PATHS:%=-L %) + +define make-exe + $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \ + $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group + $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1 + $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec + $(RM) $(basename $@).srec1 + $(NM) -n $(basename $@).exe > $(basename $@).num + $(SIZE) $(basename $@).exe +endef +else +define make-exe + $(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe $(LINK_OBJS) + $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1 + $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec + $(RM) $(basename $@).srec1 + $(NM) -n $(basename $@).exe > $(basename $@).num + $(SIZE) $(basename $@).exe +endef +endif + +# Miscellaneous additions go here + + + + + |