summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/started_ada/ChangeLog6
-rw-r--r--doc/started_ada/buildada.t186
-rw-r--r--doc/started_ada/gdb.t36
-rw-r--r--doc/started_ada/tversions.texi72
4 files changed, 153 insertions, 147 deletions
diff --git a/doc/started_ada/ChangeLog b/doc/started_ada/ChangeLog
index 151bd287bc..e6e7706771 100644
--- a/doc/started_ada/ChangeLog
+++ b/doc/started_ada/ChangeLog
@@ -1,3 +1,9 @@
+2003-08-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
+
+ * buildada.t, gdb.t, tversions.texi:
+ Don't use VARIABLEs containing '-' in @set and @value (violates
+ texi-syntax).
+
2003-01-25 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* started_ada.texi: Set @setfilename started_ada.info.
diff --git a/doc/started_ada/buildada.t b/doc/started_ada/buildada.t
index 58ee3f3778..8552e1855c 100644
--- a/doc/started_ada/buildada.t
+++ b/doc/started_ada/buildada.t
@@ -50,14 +50,14 @@ This section lists the components of an RTEMS cross development system.
Included are the locations of each component as well as any required RTEMS
specific patches.
-@subheading @value{GCC-VERSION}
+@subheading @value{GCCVERSION}
@example
- FTP Site: @value{GCC-FTPSITE}
- Directory: @value{GCC-FTPDIR}
- File: @value{GCC-TAR}
+ FTP Site: @value{GCCFTPSITE}
+ Directory: @value{GCCFTPDIR}
+ File: @value{GCCTAR}
@ifset use-html
-@c URL: @uref{ftp://@value{GCC-FTPSITE}@value{GCC-FTPDIR}/@value{GCC-TAR},Download @value{GCC-VERSION}}
- URL: ftp://@value{GCC-FTPSITE}@value{GCC-FTPDIR}/@value{GCC-TAR}
+@c URL: @uref{ftp://@value{GCCFTPSITE}@value{GCCFTPDIR}/@value{GCCTAR},Download @value{GCCVERSION}}
+ URL: ftp://@value{GCCFTPSITE}@value{GCCFTPDIR}/@value{GCCTAR}
@end ifset
@end example
@@ -72,70 +72,70 @@ specific patches.
@end ifset
@end example
-@subheading @value{BINUTILS-VERSION}
+@subheading @value{BINUTILSVERSION}
@example
- FTP Site: @value{BINUTILS-FTPSITE}
- Directory: @value{BINUTILS-FTPDIR}
- File: @value{BINUTILS-TAR}
+ FTP Site: @value{BINUTILSFTPSITE}
+ Directory: @value{BINUTILSFTPDIR}
+ File: @value{BINUTILSTAR}
@ifset use-html
-@c URL: @uref{ftp://@value{BINUTILS-FTPSITE}@value{BINUTILS-FTPDIR}/@value{BINUTILS-TAR}, Download @value{BINUTILS-VERSION}}
- URL: ftp://@value{BINUTILS-FTPSITE}@value{BINUTILS-FTPDIR}/@value{BINUTILS-TAR}
+@c URL: @uref{ftp://@value{BINUTILSFTPSITE}@value{BINUTILSFTPDIR}/@value{BINUTILSTAR}, Download @value{BINUTILSVERSION}}
+ URL: ftp://@value{BINUTILSFTPSITE}@value{BINUTILSFTPDIR}/@value{BINUTILSTAR}
@end ifset
@end example
-@subheading @value{NEWLIB-VERSION}
+@subheading @value{NEWLIBVERSION}
@example
- FTP Site: @value{NEWLIB-FTPSITE}
- Directory: @value{NEWLIB-FTPDIR}
- File: @value{NEWLIB-TAR}
+ FTP Site: @value{NEWLIBFTPSITE}
+ Directory: @value{NEWLIBFTPDIR}
+ File: @value{NEWLIBTAR}
@ifset use-html
-@c URL: @uref{ftp://@value{NEWLIB-FTPSITE}@value{NEWLIB-FTPDIR}/@value{NEWLIB-TAR}, Download @value{NEWLIB-VERSION}}
- URL: ftp://@value{NEWLIB-FTPSITE}@value{NEWLIB-FTPDIR}/@value{NEWLIB-TAR}
+@c URL: @uref{ftp://@value{NEWLIBFTPSITE}@value{NEWLIBFTPDIR}/@value{NEWLIBTAR}, Download @value{NEWLIBVERSION}}
+ URL: ftp://@value{NEWLIBFTPSITE}@value{NEWLIBFTPDIR}/@value{NEWLIBTAR}
@end ifset
@end example
-@subheading @value{RTEMS-VERSION}
+@subheading @value{RTEMSVERSION}
@example
- FTP Site: @value{RTEMS-FTPSITE}
- Directory: @value{RTEMS-FTPDIR}
- File: @value{RTEMS-TAR}
+ FTP Site: @value{RTEMSFTPSITE}
+ Directory: @value{RTEMSFTPDIR}
+ File: @value{RTEMSTAR}
@ifset use-html
-@c URL: @uref{ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}, Download RTEMS components}
- URL: ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}
+@c URL: @uref{ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}, Download RTEMS components}
+ URL: ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}
@end ifset
@end example
@subheading RTEMS Hello World
@example
- FTP Site: @value{RTEMS-FTPSITE}
- Directory: @value{RTEMS-FTPDIR}
+ FTP Site: @value{RTEMSFTPSITE}
+ Directory: @value{RTEMSFTPDIR}
File: hello_world_ada.tgz
@ifset use-html
-@c URL: @uref{ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}/ada_tools/hello_world_ada.tgz, Download RTEMS Hello World}
- URL: ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}/ada_tools/hello_world_ada.tgz
+@c URL: @uref{ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}/ada_tools/hello_world_ada.tgz, Download RTEMS Hello World}
+ URL: ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}/ada_tools/hello_world_ada.tgz
@end ifset
@end example
@subheading RTEMS Specific Tool Patches and Scripts
@example
- FTP Site: @value{RTEMS-FTPSITE}
- Directory: @value{RTEMS-FTPDIR}/ada_tools/source
- File: @value{BUILDTOOLS-TAR}
-@ifset BINUTILS-RTEMSPATCH
- File: @value{BINUTILS-RTEMSPATCH}
+ FTP Site: @value{RTEMSFTPSITE}
+ Directory: @value{RTEMSFTPDIR}/ada_tools/source
+ File: @value{BUILDTOOLSTAR}
+@ifset BINUTILSRTEMSPATCH
+ File: @value{BINUTILSRTEMSPATCH}
@end ifset
-@ifset NEWLIB-RTEMSPATCH
- File: @value{NEWLIB-RTEMSPATCH}
+@ifset NEWLIBRTEMSPATCH
+ File: @value{NEWLIBRTEMSPATCH}
@end ifset
-@ifset GCC-RTEMSPATCH
- File: @value{GCC-RTEMSPATCH}
+@ifset GCCRTEMSPATCH
+ File: @value{GCCRTEMSPATCH}
@end ifset
@ifset GNAT-RTEMSPATCH
File: @value{GNAT-RTEMSPATCH}
@end ifset
@ifset use-html
-@c URL: @uref{ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}/ada_tools/source, Download RTEMS patches}
- URL: ftp://@value{RTEMS-FTPSITE}@value{RTEMS-FTPDIR}/ada_tools/source
+@c URL: @uref{ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}/ada_tools/source, Download RTEMS patches}
+ URL: ftp://@value{RTEMSFTPSITE}@value{RTEMSFTPDIR}/ada_tools/source
@end ifset
@end example
@@ -146,21 +146,21 @@ tar files using the following command sequence:
@example
cd tools
-tar xzf ../archive/@value{GCC-TAR}
+tar xzf ../archive/@value{GCCTAR}
tar xzf ../archive/@value{GNAT-TAR}
-tar xzf ../archive/@value{BINUTILS-TAR}
-tar xzf ../archive/@value{NEWLIB-TAR}
-tar xzf ../archive/@value{BUILDTOOLS-TAR}
+tar xzf ../archive/@value{BINUTILSTAR}
+tar xzf ../archive/@value{NEWLIBTAR}
+tar xzf ../archive/@value{BUILDTOOLSTAR}
@end example
After the compressed tar files have been unpacked, the following
directories will have been created under tools.
@itemize @bullet
-@item @value{BINUTILS-UNTAR}
-@item @value{GCC-UNTAR}
+@item @value{BINUTILSUNTAR}
+@item @value{GCCUNTAR}
@item @value{GNAT-UNTAR}
-@item @value{NEWLIB-UNTAR}
+@item @value{NEWLIBUNTAR}
@end itemize
There will also be a set of scripts in the current directory
@@ -193,20 +193,20 @@ The directory tree should look something like the following figure:
@group
/whatever/prefix/you/choose/
archive/
- @value{GCC-TAR}
+ @value{GCCTAR}
@value{GNAT-TAR}
- @value{BINUTILS-TAR}
- @value{NEWLIB-TAR}
- @value{RTEMS-TAR}
- @value{BUILDTOOLS-TAR}
-@ifset GCC-RTEMSPATCH
- @value{GCC-RTEMSPATCH}
+ @value{BINUTILSTAR}
+ @value{NEWLIBTAR}
+ @value{RTEMSTAR}
+ @value{BUILDTOOLSTAR}
+@ifset GCCRTEMSPATCH
+ @value{GCCRTEMSPATCH}
@end ifset
-@ifset BINUTILS-RTEMSPATCH
- @value{BINUTILS-RTEMSPATCH}
+@ifset BINUTILSRTEMSPATCH
+ @value{BINUTILSRTEMSPATCH}
@end ifset
-@ifset NEWLIB-RTEMSPATCH
- @value{NEWLIB-RTEMSPATCH}
+@ifset NEWLIBRTEMSPATCH
+ @value{NEWLIBRTEMSPATCH}
@end ifset
@ifset GNAT-RTEMSPATCH
@value{GNAT-RTEMSPATCH}
@@ -214,10 +214,10 @@ The directory tree should look something like the following figure:
hello_world_ada.tgz
bit_ada
tools/
- @value{BINUTILS-UNTAR}/
- @value{GCC-UNTAR}/
+ @value{BINUTILSUNTAR}/
+ @value{GCCUNTAR}/
@value{GNAT-UNTAR}/
- @value{NEWLIB-UNTAR}/
+ @value{NEWLIBUNTAR}/
bit_ada
bit_gdb
bit_rtems
@@ -263,25 +263,25 @@ documentation before posting a problem to a mailing list or news group.
@section Apply RTEMS Patch to GCC
-@ifclear GCC-RTEMSPATCH
-No RTEMS specific patches are required for @value{GCC-VERSION} to
-support @value{RTEMS-VERSION}.
+@ifclear GCCRTEMSPATCH
+No RTEMS specific patches are required for @value{GCCVERSION} to
+support @value{RTEMSVERSION}.
@end ifclear
-@ifset GCC-RTEMSPATCH
+@ifset GCCRTEMSPATCH
Apply the patch using the following command sequence:
@example
-cd tools/@value{GCC-UNTAR}
-zcat ../../archive/@value{GCC-RTEMSPATCH} | patch -p1
+cd tools/@value{GCCUNTAR}
+zcat ../../archive/@value{GCCRTEMSPATCH} | patch -p1
@end example
Check to see if any of these patches have been rejected using the following
sequence:
@example
-cd tools/@value{GCC-UNTAR}
+cd tools/@value{GCCUNTAR}
find . -name "*.rej" -print
@end example
@@ -296,24 +296,24 @@ This should not happen with a good patch file which is properly applied.
@section Apply RTEMS Patch to binutils
-@ifclear BINUTILS-RTEMSPATCH
-No RTEMS specific patches are required for @value{BINUTILS-VERSION} to
-support @value{RTEMS-VERSION}.
+@ifclear BINUTILSRTEMSPATCH
+No RTEMS specific patches are required for @value{BINUTILSVERSION} to
+support @value{RTEMSVERSION}.
@end ifclear
-@ifset BINUTILS-RTEMSPATCH
+@ifset BINUTILSRTEMSPATCH
Apply the patch using the following command sequence:
@example
-cd tools/@value{BINUTILS-UNTAR}
-zcat ../../archive/@value{BINUTILS-RTEMSPATCH} | patch -p1
+cd tools/@value{BINUTILSUNTAR}
+zcat ../../archive/@value{BINUTILSRTEMSPATCH} | patch -p1
@end example
Check to see if any of these patches have been rejected using the following
sequence:
@example
-cd tools/@value{BINUTILS-UNTAR}
+cd tools/@value{BINUTILSUNTAR}
find . -name "*.rej" -print
@end example
@@ -328,25 +328,25 @@ This should not happen with a good patch file which is properly applied.
@section Apply RTEMS Patch to newlib
-@ifclear NEWLIB-RTEMSPATCH
-No RTEMS specific patches are required for @value{NEWLIB-VERSION} to
-support @value{RTEMS-VERSION}.
+@ifclear NEWLIBRTEMSPATCH
+No RTEMS specific patches are required for @value{NEWLIBVERSION} to
+support @value{RTEMSVERSION}.
@end ifclear
-@ifset NEWLIB-RTEMSPATCH
+@ifset NEWLIBRTEMSPATCH
Apply the patch using the following command sequence:
@example
-cd tools/@value{NEWLIB-UNTAR}
-zcat ../../archive/@value{NEWLIB-RTEMSPATCH} | patch -p1
+cd tools/@value{NEWLIBUNTAR}
+zcat ../../archive/@value{NEWLIBRTEMSPATCH} | patch -p1
@end example
Check to see if any of these patches have been rejected using the following
sequence:
@example
-cd tools/@value{NEWLIB-UNTAR}
+cd tools/@value{NEWLIBUNTAR}
find . -name "*.rej" -print
@end example
@@ -363,7 +363,7 @@ This should not happen with a good patch file which is properly applied.
@ifclear GNAT-RTEMSPATCH
No RTEMS specific patches are required for @value{GNAT-VERSION} to
-support @value{RTEMS-VERSION}.
+support @value{RTEMSVERSION}.
@end ifclear
@ifset GNAT-RTEMSPATCH
@@ -397,11 +397,11 @@ This should not happen with a good patch file which is properly applied.
Copy the ada subtree in the patched subtree of
tools/@value{GNAT-UNTAR}/src to the
-tools/@value{GCC-UNTAR} directory:
+tools/@value{GCCUNTAR} directory:
@example
cd tools/@value{GNAT-UNTAR}/src
-cp -r ada ../../@value{GCC-UNTAR}
+cp -r ada ../../@value{GCCUNTAR}
@end example
@@ -428,30 +428,30 @@ under the build directory. The build directory will be removed
automatically upon successful completion of the build procedure.
@item BINUTILS
-is the directory under tools that contains @value{BINUTILS-UNTAR}.
+is the directory under tools that contains @value{BINUTILSUNTAR}.
For example:
@example
-BINUTILS=@value{BINUTILS-UNTAR}
+BINUTILS=@value{BINUTILSUNTAR}
@end example
@item GCC
-is the directory under tools that contains @value{GCC-UNTAR}.
+is the directory under tools that contains @value{GCCUNTAR}.
For example,
@example
-GCC=@value{GCC-UNTAR}
+GCC=@value{GCCUNTAR}
@end example
Note that the gnat version is not needed because the gnat source
is built as part of building gcc.
@item NEWLIB
-is the directory under tools that contains @value{NEWLIB-UNTAR}.
+is the directory under tools that contains @value{NEWLIBUNTAR}.
For example:
@example
-NEWLIB=@value{NEWLIB-UNTAR}
+NEWLIB=@value{NEWLIBUNTAR}
@end example
@item BUILD_DOCS
@@ -483,7 +483,7 @@ executable code in these libraries will be for the default compiler settings
and not necessarily be correct for your CPU model.
@item RTEMS
-is the directory under tools that contails @value{RTEMS-UNTAR}.
+is the directory under tools that contails @value{RTEMSUNTAR}.
@item ENABLE_RTEMS_POSIX
is set to "yes" if you want to enable the RTEMS POSIX API support.
@@ -674,7 +674,7 @@ in the various tool source trees. The following command
does this for the binutils source:
@example
-find @value{BINUTILS-UNTAR} -name config.status -print
+find @value{BINUTILSUNTAR} -name config.status -print
@end example
The solution for this is to execute the command
@@ -691,7 +691,7 @@ configuration. The include path used is something like
this:
@example
--I../../@value{BINUTILS-UNTAR}/gcc -I/@value{BINUTILS-UNTAR}/gcc/include -I.
+-I../../@value{BINUTILSUNTAR}/gcc -I/@value{BINUTILSUNTAR}/gcc/include -I.
@end example
Note that the tool source directory is searched before the
diff --git a/doc/started_ada/gdb.t b/doc/started_ada/gdb.t
index 668ab9535f..01094bf384 100644
--- a/doc/started_ada/gdb.t
+++ b/doc/started_ada/gdb.t
@@ -26,10 +26,10 @@ Use the following commands to unarchive the gdb distribution:
@example
cd tools
-tar xzf ../archive/@value{GDB-TAR}
+tar xzf ../archive/@value{GDBTAR}
@end example
-The directory @value{GDB-UNTAR} is created under the tools directory.
+The directory @value{GDBUNTAR} is created under the tools directory.
@c
@c GDB GNAT Patch
@@ -38,8 +38,8 @@ The directory @value{GDB-UNTAR} is created under the tools directory.
@section Apply GNAT Patch to GDB
@ifclear GDB-GNATPATCH
-No GNAT specific patches are required for @value{GDB-VERSION} to
-support @value{RTEMS-VERSION} and @value{GNAT-VERSION}.
+No GNAT specific patches are required for @value{GDBVERSION} to
+support @value{RTEMSVERSION} and @value{GNAT-VERSION}.
@end ifclear
@ifset GDB-GNATPATCH
@@ -47,7 +47,7 @@ support @value{RTEMS-VERSION} and @value{GNAT-VERSION}.
Apply the patch using the following command sequence:
@example
-cd tools/@value{GDB-UNTAR}
+cd tools/@value{GDBUNTAR}
zcat archive/@value{GDB-GNATPATCH} | patch -p1
@end example
@@ -55,7 +55,7 @@ Check to see if any of these patches have been rejected using the following
sequence:
@example
-cd tools/@value{GDB-UNTAR}
+cd tools/@value{GDBUNTAR}
find . -name "*.rej" -print
@end example
@@ -65,7 +65,7 @@ This should not happen with a good patch file.
To see the files that have been modified use the sequence:
@example
-cd tools/@value{GDB-UNTAR}
+cd tools/@value{GDBUNTAR}
find . -name "*.orig" -print
@end example
@@ -79,25 +79,25 @@ The files that are found, have been modified by the patch file.
@section Apply RTEMS Patch to GDB
-@ifclear GDB-RTEMSPATCH
-No RTEMS specific patches are required for @value{GDB-VERSION} to
-support @value{RTEMS-VERSION}.
+@ifclear GDBRTEMSPATCH
+No RTEMS specific patches are required for @value{GDBVERSION} to
+support @value{RTEMSVERSION}.
@end ifclear
-@ifset GDB-RTEMSPATCH
+@ifset GDBRTEMSPATCH
Apply the patch using the following command sequence:
@example
-cd tools/@value{GDB-UNTAR}
-zcat archive/@value{GDB-RTEMSPATCH} | patch -p1
+cd tools/@value{GDBUNTAR}
+zcat archive/@value{GDBRTEMSPATCH} | patch -p1
@end example
Check to see if any of these patches have been rejected using the following
sequence:
@example
-cd tools/@value{GDB-UNTAR}
+cd tools/@value{GDBUNTAR}
find . -name "*.rej" -print
@end example
@@ -107,7 +107,7 @@ This should not happen with a good patch file.
To see the files that have been modified use the sequence:
@example
-cd tools/@value{GDB-UNTAR}
+cd tools/@value{GDBUNTAR}
find . -name "*.orig" -print
@end example
@@ -134,7 +134,7 @@ Sparc Instruction Simulator (SIS):
@example
cd tools/build-sis
-../@value{GDB-UNTAR}/configure --target-sparc-erc32-aout \
+../@value{GDBUNTAR}/configure --target-sparc-erc32-aout \
--program-prefix=sparc-rtems- \
--disable-gdbtk \
--enable-targets=all \
@@ -172,7 +172,7 @@ Instruction Simulator (PSIM):
@example
cd tools/build-ppc
-../@value{GDB-UNTAR}/configure \
+../@value{GDBUNTAR}/configure \
--target=powerpc-unknown-eabi \
--program-prefix=powerpc-rtems- \
--enable-sim-powerpc \
@@ -215,7 +215,7 @@ the DINK32 ROM monitor:
@example
cd tools/build-dink32
-../@value{GDB-UNTAR}/configure --target-powerpc-elf \
+../@value{GDBUNTAR}/configure --target-powerpc-elf \
--program-prefix=powerpc-rtems- \
--enable-targets=all \
--prefix=<INSTALL_POINT_FOR_DINK32>
diff --git a/doc/started_ada/tversions.texi b/doc/started_ada/tversions.texi
index 6c5a82e0a0..aa7d626bcf 100644
--- a/doc/started_ada/tversions.texi
+++ b/doc/started_ada/tversions.texi
@@ -21,12 +21,12 @@
@c GCC Version
@c
-@set GCC-VERSION gcc 2.8.1
-@set GCC-TAR gcc-2.8.1.tar.gz
-@set GCC-UNTAR gcc-2.8.1
-@set GCC-FTPSITE ftp.gnu.org
-@set GCC-FTPDIR /pub/gnu/gcc
-@set GCC-RTEMSPATCH gcc-2.8.1-rtems-gnat-3.13p-20000429.diff.gz
+@set GCCVERSION gcc 2.8.1
+@set GCCTAR gcc-2.8.1.tar.gz
+@set GCCUNTAR gcc-2.8.1
+@set GCCFTPSITE ftp.gnu.org
+@set GCCFTPDIR /pub/gnu/gcc
+@set GCCRTEMSPATCH gcc-2.8.1-rtems-gnat-3.13p-20000429.diff.gz
@c
@c GNAT Version
@@ -44,53 +44,53 @@
@c
@c The "official" binutils
-@set BINUTILS-VERSION binutils 2.10
-@set BINUTILS-TAR binutils-2.10.tar.gz
-@set BINUTILS-UNTAR binutils-2.10
-@set BINUTILS-FTPSITE ftp.gnu.org
-@set BINUTILS-FTPDIR /pub/gnu/binutils
-@set BINUTILS-RTEMSPATCH binutils-2.10-rtems-gnat-3.13p-20001107.diff
+@set BINUTILSVERSION binutils 2.10
+@set BINUTILSTAR binutils-2.10.tar.gz
+@set BINUTILSUNTAR binutils-2.10
+@set BINUTILSFTPSITE ftp.gnu.org
+@set BINUTILSFTPDIR /pub/gnu/binutils
+@set BINUTILSRTEMSPATCH binutils-2.10-rtems-gnat-3.13p-20001107.diff
@c When forced to use a snapshot
-@c @set BINUTILS-VERSION gas 980314
-@c @set BINUTILS-TAR gas-980314.tgz
-@c @set BINUTILS-UNTAR gas-980314
-@c @set BINUTILS-FTPSITE ftp.OARcorp.com
-@c @set BINUTILS-FTPDIR /oarcorp/private/beta3/ada_tools
-@c @set BINUTILS-RTEMSPATCH binutils-2.8.1-rtems-diff-980321.gz
+@c @set BINUTILSVERSION gas 980314
+@c @set BINUTILSTAR gas-980314.tgz
+@c @set BINUTILSUNTAR gas-980314
+@c @set BINUTILSFTPSITE ftp.OARcorp.com
+@c @set BINUTILSFTPDIR /oarcorp/private/beta3/ada_tools
+@c @set BINUTILSRTEMSPATCH binutils-2.8.1-rtems-diff-980321.gz
@c
@c NEWLIB Version
@c
-@set NEWLIB-VERSION newlib 1.8.2
-@set NEWLIB-TAR newlib-1.8.2.tar.gz
-@set NEWLIB-UNTAR newlib-1.8.2
-@set NEWLIB-FTPSITE sources.redhat.com
-@set NEWLIB-FTPDIR /pub/newlib
-@set NEWLIB-RTEMSPATCH newlib-1.8.2-rtems-20000606.diff.gz
+@set NEWLIBVERSION newlib 1.8.2
+@set NEWLIBTAR newlib-1.8.2.tar.gz
+@set NEWLIBUNTAR newlib-1.8.2
+@set NEWLIBFTPSITE sources.redhat.com
+@set NEWLIBFTPDIR /pub/newlib
+@set NEWLIBRTEMSPATCH newlib-1.8.2-rtems-20000606.diff.gz
@c
@c GDB Version
@c
-@set GDB-VERSION gdb 4.17
-@set GDB-TAR gdb-4.17.tar.gz
-@set GDB-UNTAR gdb-4.17
-@set GDB-FTPSITE ftp.gnu.org
-@set GDB-FTPDIR /pub/gnu/gdb/
-@set GDB-RTEMSPATCH gdb-4.17-rtems-gnat-3.13p-20000918.diff
+@set GDBVERSION gdb 4.17
+@set GDBTAR gdb-4.17.tar.gz
+@set GDBUNTAR gdb-4.17
+@set GDBFTPSITE ftp.gnu.org
+@set GDBFTPDIR /pub/gnu/gdb/
+@set GDBRTEMSPATCH gdb-4.17-rtems-gnat-3.13p-20000918.diff
@c @set GDB-GNATPATCH gdb-ada-patch-1.17.8.gz
@c
@c RTEMS Version
@c
-@set RTEMS-VERSION RTEMS 4.5.1
-@set RTEMS-TAR rtems-4.5.1.tgz
-@set RTEMS-UNTAR rtems-4.5.1
-@set RTEMS-FTPSITE ftp.OARcorp.com
-@set RTEMS-FTPDIR /pub/rtems/releases/4.5.1
-@set BUILDTOOLS-TAR c_build_scripts-4.5.1.tgz
+@set RTEMSVERSION RTEMS 4.5.1
+@set RTEMSTAR rtems-4.5.1.tgz
+@set RTEMSUNTAR rtems-4.5.1
+@set RTEMSFTPSITE ftp.OARcorp.com
+@set RTEMSFTPDIR /pub/rtems/releases/4.5.1
+@set BUILDTOOLSTAR c_build_scripts-4.5.1.tgz