diff options
Diffstat (limited to 'doc/texinfo/texinfo.tex')
| -rw-r--r-- | doc/texinfo/texinfo.tex | 4426 |
1 files changed, 4426 insertions, 0 deletions
diff --git a/doc/texinfo/texinfo.tex b/doc/texinfo/texinfo.tex new file mode 100644 index 0000000000..8fcde98a03 --- /dev/null +++ b/doc/texinfo/texinfo.tex @@ -0,0 +1,4426 @@ +%% TeX macros to handle texinfo files + +% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 1994 Free Software Foundation, Inc. + +%This texinfo.tex file is free software; you can redistribute it and/or +%modify it under the terms of the GNU General Public License as +%published by the Free Software Foundation; either version 2, or (at +%your option) any later version. + +%This texinfo.tex file is distributed in the hope that it will be +%useful, but WITHOUT ANY WARRANTY; without even the implied warranty +%of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +%General Public License for more details. + +%You should have received a copy of the GNU General Public License +%along with this texinfo.tex file; see the file COPYING. If not, write +%to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, +%USA. + + +%In other words, you are welcome to use, share and improve this program. +%You are forbidden to forbid anyone else to use, share and improve +%what you give them. Help stamp out software-hoarding! + + +% Send bug reports to bug-texinfo@prep.ai.mit.edu. +% Please include a *precise* test case in each bug report. + + +% Make it possible to create a .fmt file just by loading this file: +% if the underlying format is not loaded, start by loading it now. +% Added by gildea November 1993. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi + +% This automatically updates the version number based on RCS. +\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} +\deftexinfoversion$Revision$ +\message{Loading texinfo package [Version \texinfoversion]:} + +% If in a .fmt file, print the version number +% and turn on active characters that we couldn't do earlier because +% they might have appeared in the input file name. +\everyjob{\message{[Texinfo version \texinfoversion]}\message{} + \catcode`+=\active \catcode`\_=\active} + +% Save some parts of plain tex whose names we will redefine. + +\let\ptextilde=\~ +\let\ptexlbrace=\{ +\let\ptexrbrace=\} +\let\ptexdots=\dots +\let\ptexdot=\. +\let\ptexstar=\* +\let\ptexend=\end +\let\ptexbullet=\bullet +\let\ptexb=\b +\let\ptexc=\c +\let\ptexi=\i +\let\ptext=\t +\let\ptexl=\l +\let\ptexL=\L + +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} +\let\~ = \tie % And make it available as @~. + +\message{Basics,} +\chardef\other=12 + +% If this character appears in an error message or help string, it +% starts a new line in the output. +\newlinechar = `^^J + +% Set up fixed words for English. +\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi% +\def\putwordInfo{Info}% +\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi% +\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi% +\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi% +\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi% +\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi% +\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi% +\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi% +\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi% +\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi% + +% Ignore a token. +% +\def\gobble#1{} + +\hyphenation{ap-pen-dix} +\hyphenation{mini-buf-fer mini-buf-fers} +\hyphenation{eshell} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen \bindingoffset \bindingoffset=0pt +\newdimen \normaloffset \normaloffset=\hoffset +\newdimen\pagewidth \newdimen\pageheight +\pagewidth=\hsize \pageheight=\vsize + +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{\tracingcommands2 \tracingstats2 + \tracingpages1 \tracingoutput1 \tracinglostchars1 + \tracingmacros2 \tracingparagraphs1 \tracingrestores1 + \showboxbreadth\maxdimen\showboxdepth\maxdimen +}% + +%---------------------Begin change----------------------- +% +%%%% For @cropmarks command. +% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\cornerlong \newdimen\cornerthick +\newdimen \topandbottommargin +\newdimen \outerhsize \newdimen \outervsize +\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks +\outerhsize=7in +%\outervsize=9.5in +% Alternative @smallbook page size is 9.25in +\outervsize=9.25in +\topandbottommargin=.75in +% +%---------------------End change----------------------- + +% \onepageout takes a vbox as an argument. Note that \pagecontents +% does insertions itself, but you have to call it yourself. +\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}} +\def\onepageout#1{\hoffset=\normaloffset +\ifodd\pageno \advance\hoffset by \bindingoffset +\else \advance\hoffset by -\bindingoffset\fi +{\escapechar=`\\\relax % makes sure backslash is used in output files. +\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}% +{\let\hsize=\pagewidth \makefootline}}}% +\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi} + +%%%% For @cropmarks command %%%% + +% Here is a modification of the main output routine for Near East Publications +% This provides right-angle cropmarks at all four corners. +% The contents of the page are centerlined into the cropmarks, +% and any desired binding offset is added as an \hskip on either +% site of the centerlined box. (P. A. MacKay, 12 November, 1986) +% +\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up +{\escapechar=`\\\relax % makes sure backslash is used in output files. + \shipout + \vbox to \outervsize{\hsize=\outerhsize + \vbox{\line{\ewtop\hfill\ewtop}} + \nointerlineskip + \line{\vbox{\moveleft\cornerthick\nstop} + \hfill + \vbox{\moveright\cornerthick\nstop}} + \vskip \topandbottommargin + \centerline{\ifodd\pageno\hskip\bindingoffset\fi + \vbox{ + {\let\hsize=\pagewidth \makeheadline} + \pagebody{#1} + {\let\hsize=\pagewidth \makefootline}} + \ifodd\pageno\else\hskip\bindingoffset\fi} + \vskip \topandbottommargin plus1fill minus1fill + \boxmaxdepth\cornerthick + \line{\vbox{\moveleft\cornerthick\nsbot} + \hfill + \vbox{\moveright\cornerthick\nsbot}} + \nointerlineskip + \vbox{\line{\ewbot\hfill\ewbot}} + }} + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi} +% +% Do @cropmarks to get crop marks +\def\cropmarks{\let\onepageout=\croppageout } + +\newinsert\margin \dimen\margin=\maxdimen + +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +% marginal hacks, juha@viisa.uucp (Juha Takala) +\ifvoid\margin\else % marginal info is present + \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi +\dimen@=\dp#1 \unvbox#1 +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Parse an argument, then pass it to #1. The argument is the rest of +% the input line (except we remove a trailing comment). #1 should be a +% macro which expects an ordinary undelimited TeX argument. +% +\def\parsearg#1{% + \let\next = #1% + \begingroup + \obeylines + \futurelet\temp\parseargx +} + +% If the next token is an obeyed space (from an @example environment or +% the like), remove it and recurse. Otherwise, we're done. +\def\parseargx{% + % \obeyedspace is defined far below, after the definition of \sepspaces. + \ifx\obeyedspace\temp + \expandafter\parseargdiscardspace + \else + \expandafter\parseargline + \fi +} + +% Remove a single space (as the delimiter token to the macro call). +{\obeyspaces % + \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} + +{\obeylines % + \gdef\parseargline#1^^M{% + \endgroup % End of the group started in \parsearg. + % + % First remove any @c comment, then any @comment. + % Result of each macro is put in \toks0. + \argremovec #1\c\relax % + \expandafter\argremovecomment \the\toks0 \comment\relax % + % + % Call the caller's macro, saved as \next in \parsearg. + \expandafter\next\expandafter{\the\toks0}% + }% +} + +% Since all \c{,omment} does is throw away the argument, we can let TeX +% do that for us. The \relax here is matched by the \relax in the call +% in \parseargline; it could be more or less anything, its purpose is +% just to delimit the argument to the \c. +\def\argremovec#1\c#2\relax{\toks0 = {#1}} +\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} + +% \argremovec{,omment} might leave us with trailing spaces, though; e.g., +% @end itemize @c foo +% will have two active spaces as part of the argument with the +% `itemize'. Here we remove all active spaces from #1, and assign the +% result to \toks0. +% +% This loses if there are any *other* active characters besides spaces +% in the argument -- _ ^ +, for example -- since they get expanded. +% Fortunately, Texinfo does not define any such commands. (If it ever +% does, the catcode of the characters in questionwill have to be changed +% here.) But this means we cannot call \removeactivespaces as part of +% \argremovec{,omment}, since @c uses \parsearg, and thus the argument +% that \parsearg gets might well have any character at all in it. +% +\def\removeactivespaces#1{% + \begingroup + \ignoreactivespaces + \edef\temp{#1}% + \global\toks0 = \expandafter{\temp}% + \endgroup +} + +% Change the active space to expand to nothing. +% +\begingroup + \obeyspaces + \gdef\ignoreactivespaces{\obeyspaces\let =\empty} +\endgroup + + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +%% These are used to keep @begin/@end levels from running away +%% Call \inENV within environments (after a \begingroup) +\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} +\def\ENVcheck{% +\ifENV\errmessage{Still within an environment. Type Return to continue.} +\endgroup\fi} % This is not perfect, but it should reduce lossage + +% @begin foo is the same as @foo, for now. +\newhelp\EMsimple{Type <Return> to continue.} + +\outer\def\begin{\parsearg\beginxxx} + +\def\beginxxx #1{% +\expandafter\ifx\csname #1\endcsname\relax +{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else +\csname #1\endcsname\fi} + +% @end foo executes the definition of \Efoo. +% +\def\end{\parsearg\endxxx} +\def\endxxx #1{% + \removeactivespaces{#1}% + \edef\endthing{\the\toks0}% + % + \expandafter\ifx\csname E\endthing\endcsname\relax + \expandafter\ifx\csname \endthing\endcsname\relax + % There's no \foo, i.e., no ``environment'' foo. + \errhelp = \EMsimple + \errmessage{Undefined command `@end \endthing'}% + \else + \unmatchedenderror\endthing + \fi + \else + % Everything's ok; the right environment has been started. + \csname E\endthing\endcsname + \fi +} + +% There is an environment #1, but it hasn't been started. Give an error. +% +\def\unmatchedenderror#1{% + \errhelp = \EMsimple + \errmessage{This `@end #1' doesn't have a matching `@#1'}% +} + +% Define the control sequence \E#1 to give an unmatched @end error. +% +\def\defineunmatchedend#1{% + \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% +} + + +% Single-spacing is done by various environments (specifically, in +% \nonfillstart and \quotations). +\newskip\singlespaceskip \singlespaceskip = 12.5pt +\def\singlespace{% + % Why was this kern here? It messes up equalizing space above and below + % environments. --karl, 6may93 + %{\advance \baselineskip by -\singlespaceskip + %\kern \baselineskip}% + \setleading \singlespaceskip +} + +%% Simple single-character @ commands + +% @@ prints an @ +% Kludge this until the fonts are right (grr). +\def\@{{\tt \char '100}} + +% This is turned off because it was never documented +% and you can use @w{...} around a quote to suppress ligatures. +%% Define @` and @' to be the same as ` and ' +%% but suppressing ligatures. +%\def\`{{`}} +%\def\'{{'}} + +% Used to generate quoted braces. + +\def\mylbrace {{\tt \char '173}} +\def\myrbrace {{\tt \char '175}} +\let\{=\mylbrace +\let\}=\myrbrace + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\hfil\break\hbox{}\ignorespaces} + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=3000 } + +% @enddots{} is an end-of-sentence ellipsis. +\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000} + +% @! is an end-of-sentence bang. +\gdef\!{!\spacefactor=3000 } + +% @? is an end-of-sentence query. +\gdef\?{?\spacefactor=3000 } + +% @w prevents a word break. Without the \leavevmode, @w at the +% beginning of a paragraph, when TeX is still in vertical mode, would +% produce a whole line of output instead of starting the paragraph. +\def\w#1{\leavevmode\hbox{#1}} + +% @group ... @end group forces ... to be all on one page, by enclosing +% it in a TeX vbox. We use \vtop instead of \vbox to construct the box +% to keep its height that of a normal line. According to the rules for +% \topskip (p.114 of the TeXbook), the glue inserted is +% max (\topskip - \ht (first item), 0). If that height is large, +% therefore, no glue is inserted, and the space between the headline and +% the text is small, which looks bad. +% +\def\group{\begingroup + \ifnum\catcode13=\active \else + \errhelp = \groupinvalidhelp + \errmessage{@group invalid in context where filling is enabled}% + \fi + % + % The \vtop we start below produces a box with normal height and large + % depth; thus, TeX puts \baselineskip glue before it, and (when the + % next line of text is done) \lineskip glue after it. (See p.82 of + % the TeXbook.) Thus, space below is not quite equal to space + % above. But it's pretty close. + \def\Egroup{% + \egroup % End the \vtop. + \endgroup % End the \group. + }% + % + \vtop\bgroup + % We have to put a strut on the last line in case the @group is in + % the midst of an example, rather than completely enclosing it. + % Otherwise, the interline space between the last line of the group + % and the first line afterwards is too small. But we can't put the + % strut in \Egroup, since there it would be on a line by itself. + % Hence this just inserts a strut at the beginning of each line. + \everypar = {\strut}% + % + % Since we have a strut on every line, we don't need any of TeX's + % normal interline spacing. + \offinterlineskip + % + % OK, but now we have to do something about blank + % lines in the input in @example-like environments, which normally + % just turn into \lisppar, which will insert no space now that we've + % turned off the interline space. Simplest is to make them be an + % empty paragraph. + \ifx\par\lisppar + \edef\par{\leavevmode \par}% + % + % Reset ^^M's definition to new definition of \par. + \obeylines + \fi + % + % Do @comment since we are called inside an environment such as + % @example, where each end-of-line in the input causes an + % end-of-line in the output. We don't want the end-of-line after + % the `@group' to put extra space in the output. Since @group + % should appear on a line by itself (according to the Texinfo + % manual), we don't worry about eating any user text. + \comment +} +% +% TeX puts in an \escapechar (i.e., `@') at the beginning of the help +% message, so this ends up printing `@group can only ...'. +% +\newhelp\groupinvalidhelp{% +group can only be used in environments such as @example,^^J% +where each line of input produces a line of output.} + +% @need space-in-mils +% forces a page break if there is not space-in-mils remaining. + +\newdimen\mil \mil=0.001in + +\def\need{\parsearg\needx} + +% Old definition--didn't work. +%\def\needx #1{\par % +%% This method tries to make TeX break the page naturally +%% if the depth of the box does not fit. +%{\baselineskip=0pt% +%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000 +%\prevdepth=-1000pt +%}} + +\def\needx#1{% + % Go into vertical mode, so we don't make a big box in the middle of a + % paragraph. + \par + % + % Don't add any leading before our big empty box, but allow a page + % break, since the best break might be right here. + \allowbreak + \nointerlineskip + \vtop to #1\mil{\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak +} + +% @br forces paragraph break + +\let\br = \par + +% @dots{} output some dots + +\def\dots{$\ldots$} + +% @page forces the start of a new page + +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +% This records the amount of indent in the innermost environment. +% That's how much \exdent should take out. +\newskip\exdentamount + +% This defn is used inside fill environments such as @defun. +\def\exdent{\parsearg\exdentyyy} +\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} + +% This defn is used inside nofill environments such as @example. +\def\nofillexdent{\parsearg\nofillexdentyyy} +\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount +\leftline{\hskip\leftskip{\rm#1}}}} + +%\hbox{{\rm#1}}\hfil\break}} + +% @include file insert text of that file as input. + +\def\include{\parsearg\includezzz} +%Use \input\thisfile to avoid blank after \input, which may be an active +%char (in which case the blank would become the \input argument). +%The grouping keeps the value of \thisfile correct even when @include +%is nested. +\def\includezzz #1{\begingroup +\def\thisfile{#1}\input\thisfile +\endgroup} + +\def\thisfile{} + +% @center line outputs that line, centered + +\def\center{\parsearg\centerzzz} +\def\centerzzz #1{{\advance\hsize by -\leftskip +\advance\hsize by -\rightskip +\centerline{#1}}} + +% @sp n outputs n lines of vertical space + +\def\sp{\parsearg\spxxx} +\def\spxxx #1{\par \vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment + +\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other% +\parsearg \commentxxx} + +\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 } + +\let\c=\comment + +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% +\let\chapter=\relax +\let\unnumbered=\relax +\let\top=\relax +\let\unnumberedsec=\relax +\let\unnumberedsection=\relax +\let\unnumberedsubsec=\relax +\let\unnumberedsubsection=\relax +\let\unnumberedsubsubsec=\relax +\let\unnumberedsubsubsection=\relax +\let\section=\relax +\let\subsec=\relax +\let\subsubsec=\relax +\let\subsection=\relax +\let\subsubsection=\relax +\let\appendix=\relax +\let\appendixsec=\relax +\let\appendixsection=\relax +\let\appendixsubsec=\relax +\let\appendixsubsection=\relax +\let\appendixsubsubsec=\relax +\let\appendixsubsubsection=\relax +\let\contents=\relax +\let\smallbook=\relax +\let\titlepage=\relax +} + +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. +% +\def\ignoremorecommands{% + \let\defcv = \relax + \let\deffn = \relax + \let\deffnx = \relax + \let\defindex = \relax + \let\defivar = \relax + \let\defmac = \relax + \let\defmethod = \relax + \let\defop = \relax + \let\defopt = \relax + \let\defspec = \relax + \let\deftp = \relax + \let\deftypefn = \relax + \let\deftypefun = \relax + \let\deftypevar = \relax + \let\deftypevr = \relax + \let\defun = \relax + \let\defvar = \relax + \let\defvr = \relax + \let\ref = \relax + \let\xref = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\settitle = \relax + \let\include = \relax + \let\lowersections = \relax + \let\down = \relax + \let\raisesections = \relax + \let\up = \relax + \let\set = \relax + \let\clear = \relax + \let\item = \relax + \let\message = \relax +} + +% Ignore @ignore ... @end ignore. +% +\def\ignore{\doignore{ignore}} + +% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text. +% +\def\ifinfo{\doignore{ifinfo}} +\def\ifhtml{\doignore{ifhtml}} +\def\html{\doignore{html}} +\def\menu{\doignore{menu}} +\def\direntry{\doignore{direntry}} + +% Ignore text until a line `@end #1'. +% +\def\doignore#1{\begingroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + \long\def\doignoretext##1\end #1{\enddoignore}% + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \catcode32 = 10 + % + % And now expand that command. + \doignoretext +} + +% What we do to finish off ignored text. +% +\def\enddoignore{\endgroup\ignorespaces}% + +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{***WARNING*** for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \warnedobstrue + \fi +} + +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax + +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. +% +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the change of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook: make the current font be a dummy font. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because not all sites + % might have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont + \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont + \let\tensf = \nullfont + % Similarly for index fonts (mostly for their use in + % smallexample) + \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont + \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont + \let\indsf = \nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex + \def\tex{\doignore{tex}} +} + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. +% +\def\set{\parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi +} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} + +% @value{foo} gets the text saved in variable foo. +% +\def\value#1{\expandafter + \ifx\csname SET#1\endcsname\relax + {\{No value for ``#1''\}} + \else \csname SET#1\endcsname \fi} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +\def\ifset{\parsearg\ifsetxxx} +\def\ifsetxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifsetfail + \else + \expandafter\ifsetsucceed + \fi +} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} + +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +\def\ifclear{\parsearg\ifclearxxx} +\def\ifclearxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifclearsucceed + \else + \expandafter\ifclearfail + \fi +} +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} + +% @iftex always succeeds; we read the text following, through @end +% iftex). But `@end iftex' should be valid only after an @iftex. +% +\def\iftex{\conditionalsucceed{iftex}} +\defineunmatchedend{iftex} + +% We can't just want to start a group at @iftex (for example) and end it +% at @end iftex, since then @set commands inside the conditional have no +% effect (they'd get reverted at the end of the group). So we must +% define \Eiftex to redefine itself to be its previous value. (We can't +% just define it to fail again with an ``unmatched end'' error, since +% the @ifset might be nested.) +% +\def\conditionalsucceed#1{% + \edef\temp{% + % Remember the current value of \E#1. + \let\nece{prevE#1} = \nece{E#1}% + % + % At the `@end #1', redefine \E#1 to be its previous value. + \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% + }% + \temp +} + +% We need to expand lots of \csname's, but we don't want to expand the +% control sequences after we've constructed them. +% +\def\nece#1{\expandafter\noexpand\csname#1\endcsname} + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math means output in math mode. +% We don't use $'s directly in the definition of \math because control +% sequences like \math are expanded when the toc file is written. Then, +% we read the toc file back, the $'s will be normal characters (as they +% should be, according to the definition of Texinfo). So we must use a +% control sequence to switch into and out of math mode. +% +% This isn't quite enough for @math to work properly in indices, but it +% seems unlikely it will ever be needed there. +% +\let\implicitmath = $ +\def\math#1{\implicitmath #1\implicitmath} + +% @bullet and @minus need the same treatment as @math, just above. +\def\bullet{\implicitmath\ptexbullet\implicitmath} +\def\minus{\implicitmath-\implicitmath} + +\def\node{\ENVcheck\parsearg\nodezzz} +\def\nodezzz#1{\nodexxx [#1,]} +\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} +\let\nwnode=\node +\let\lastnode=\relax + +\def\donoderef{\ifx\lastnode\relax\else +\expandafter\expandafter\expandafter\setref{\lastnode}\fi +\global\let\lastnode=\relax} + +\def\unnumbnoderef{\ifx\lastnode\relax\else +\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi +\global\let\lastnode=\relax} + +\def\appendixnoderef{\ifx\lastnode\relax\else +\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi +\global\let\lastnode=\relax} + +\let\refill=\relax + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \readauxfile + \opencontents + \openindices + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \global\let\setfilename=\comment % Ignore extra @setfilename cmds. + \comment % Ignore the actual filename. +} + +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, + node \samp{\ignorespaces#1{}}} + +\message{fonts,} + +% Font-change commands. + +% Texinfo supports the sans serif font style, which plain TeX does not. +% So we set up a \sf analogous to plain's \rm, etc. +\newfam\sffam +\def\sf{\fam=\sffam \tensf} +\let\li = \sf % Sometimes we call it \li, not \sf. + +%% Try out Computer Modern fonts at \magstephalf +\let\mainmagstep=\magstephalf + +% Set the font macro #1 to the font named #2, adding on the +% specified font prefix (normally `cm'). +\def\setfont#1#2{\font#1=\fontprefix#2} + +% Use cm as the default font prefix. +% To specify the font prefix, you must define \fontprefix +% before you read in texinfo.tex. +\ifx\fontprefix\undefined +\def\fontprefix{cm} +\fi + +\ifx\bigger\relax +\let\mainmagstep=\magstep1 +\setfont\textrm{r12} +\setfont\texttt{tt12} +\else +\setfont\textrm{r10 scaled \mainmagstep} +\setfont\texttt{tt10 scaled \mainmagstep} +\fi +% Instead of cmb10, you many want to use cmbx10. +% cmbx10 is a prettier font on its own, but cmb10 +% looks better when embedded in a line with cmr10. +\setfont\textbf{b10 scaled \mainmagstep} +\setfont\textit{ti10 scaled \mainmagstep} +\setfont\textsl{sl10 scaled \mainmagstep} +\setfont\textsf{ss10 scaled \mainmagstep} +\setfont\textsc{csc10 scaled \mainmagstep} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep + +% A few fonts for @defun, etc. +\setfont\defbf{bx10 scaled \magstep1} %was 1314 +\setfont\deftt{tt10 scaled \magstep1} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} + +% Fonts for indices and small examples. +% We actually use the slanted font rather than the italic, +% because texinfo normally uses the slanted fonts for that. +% Do not make many font distinctions in general in the index, since they +% aren't very useful. +\setfont\ninett{tt9} +\setfont\indrm{r9} +\setfont\indit{sl9} +\let\indsl=\indit +\let\indtt=\ninett +\let\indsf=\indrm +\let\indbf=\indrm +\setfont\indsc{csc10 at 9pt} +\font\indi=cmmi9 +\font\indsy=cmsy9 + +% Fonts for headings +\setfont\chaprm{bx12 scaled \magstep2} +\setfont\chapit{ti12 scaled \magstep2} +\setfont\chapsl{sl12 scaled \magstep2} +\setfont\chaptt{tt12 scaled \magstep2} +\setfont\chapsf{ss12 scaled \magstep2} +\let\chapbf=\chaprm +\setfont\chapsc{csc10 scaled\magstep3} +\font\chapi=cmmi12 scaled \magstep2 +\font\chapsy=cmsy10 scaled \magstep3 + +\setfont\secrm{bx12 scaled \magstep1} +\setfont\secit{ti12 scaled \magstep1} +\setfont\secsl{sl12 scaled \magstep1} +\setfont\sectt{tt12 scaled \magstep1} +\setfont\secsf{ss12 scaled \magstep1} +\setfont\secbf{bx12 scaled \magstep1} +\setfont\secsc{csc10 scaled\magstep2} +\font\seci=cmmi12 scaled \magstep1 +\font\secsy=cmsy10 scaled \magstep2 + +% \setfont\ssecrm{bx10 scaled \magstep1} % This size an font looked bad. +% \setfont\ssecit{cmti10 scaled \magstep1} % The letters were too crowded. +% \setfont\ssecsl{sl10 scaled \magstep1} +% \setfont\ssectt{tt10 scaled \magstep1} +% \setfont\ssecsf{ss10 scaled \magstep1} + +%\setfont\ssecrm{b10 scaled 1315} % Note the use of cmb rather than cmbx. +%\setfont\ssecit{ti10 scaled 1315} % Also, the size is a little larger than +%\setfont\ssecsl{sl10 scaled 1315} % being scaled magstep1. +%\setfont\ssectt{tt10 scaled 1315} +%\setfont\ssecsf{ss10 scaled 1315} + +%\let\ssecbf=\ssecrm + +\setfont\ssecrm{bx12 scaled \magstephalf} +\setfont\ssecit{ti12 scaled \magstephalf} +\setfont\ssecsl{sl12 scaled \magstephalf} +\setfont\ssectt{tt12 scaled \magstephalf} +\setfont\ssecsf{ss12 scaled \magstephalf} +\setfont\ssecbf{bx12 scaled \magstephalf} +\setfont\ssecsc{csc10 scaled \magstep1} +\font\sseci=cmmi12 scaled \magstephalf +\font\ssecsy=cmsy10 scaled \magstep1 +% The smallcaps and symbol fonts should actually be scaled \magstep1.5, +% but that is not a standard magnification. + +% Fonts for title page: +\setfont\titlerm{bx12 scaled \magstep3} +\let\authorrm = \secrm + +% In order for the font changes to affect most math symbols and letters, +% we have to define the \textfont of the standard families. Since +% texinfo doesn't allow for producing subscripts and superscripts, we +% don't bother to reset \scriptfont and \scriptscriptfont (which would +% also require loading a lot more fonts). +% +\def\resetmathfonts{% + \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy + \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf + \textfont\ttfam = \tentt \textfont\sffam = \tensf +} + + +% The font-changing commands redefine the meanings of \tenSTYLE, instead +% of just \STYLE. We do this so that font changes will continue to work +% in math mode, where it is the current \fam that is relevant in most +% cases, not the current. Plain TeX does, for example, +% \def\bf{\fam=\bffam \tenbf} By redefining \tenbf, we obviate the need +% to redefine \bf itself. +\def\textfonts{% + \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl + \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \resetmathfonts} +\def\chapfonts{% + \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl + \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \resetmathfonts} +\def\secfonts{% + \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl + \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \resetmathfonts} +\def\subsecfonts{% + \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl + \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \resetmathfonts} +\def\indexfonts{% + \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl + \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc + \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy + \resetmathfonts} + +% Set up the default fonts, so we can use them for creating boxes. +% +\textfonts + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Fonts for short table of contents. +\setfont\shortcontrm{r12} +\setfont\shortcontbf{bx12} +\setfont\shortcontsl{sl12} + +%% Add scribe-like font environments, plus @l for inline lisp (usually sans +%% serif) and @ii for TeX italic + +% \smartitalic{ARG} outputs arg in italics, followed by an italic correction +% unless the following character is such as not to need one. +\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} +\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx} + +\let\i=\smartitalic +\let\var=\smartitalic +\let\dfn=\smartitalic +\let\emph=\smartitalic +\let\cite=\smartitalic + +\def\b#1{{\bf #1}} +\let\strong=\b + +% We can't just use \exhyphenpenalty, because that only has effect at +% the end of a paragraph. Restore normal hyphenation at the end of the +% group within which \nohyphenation is presumably called. +% +\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} +\def\restorehyphenation{\hyphenchar\font = `- } + +\def\t#1{% + {\tt \rawbackslash \frenchspacing #1}% + \null +} +\let\ttfont=\t +\def\samp #1{`\tclose{#1}'\null} +\def\key #1{{\tt \nohyphenation \uppercase{#1}}\null} +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +\let\file=\samp + +% @code is a modification of @t, +% which makes spaces the same size as normal in the surrounding text. +\def\tclose#1{% + {% + % Change normal interword space to be same as for the current font. + \spaceskip = \fontdimen2\font + % + % Switch to typewriter. + \tt + % + % But `\ ' produces the large typewriter interword space. + \def\ {{\spaceskip = 0pt{} }}% + % + % Turn off hyphenation. + \nohyphenation + % + \rawbackslash + \frenchspacing + #1% + }% + \null +} + +% We *must* turn on hyphenation at `-' and `_' in \code. +% Otherwise, it is too hard to avoid overful hboxes +% in the Emacs manual, the Library manual, etc. + +% Unfortunately, TeX uses one parameter (\hyphenchar) to control +% both hyphenation at - and hyphenation within words. +% We must therefore turn them both off (\tclose does that) +% and arrange explicitly to hyphenate an a dash. +% -- rms. +{ +\catcode`\-=\active +\catcode`\_=\active +\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex} +% The following is used by \doprintindex to insure that long function names +% wrap around. It is necessary for - and _ to be active before the index is +% read from the file, as \entry parses the arguments long before \code is +% ever called. -- mycroft +\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder} +} + +\def\realdash{-} +\def\realunder{_} +\def\codedash{-\discretionary{}{}{}} +\def\codeunder{\normalunderscore\discretionary{}{}{}} +\def\codex #1{\tclose{#1}\endgroup} + +%\let\exp=\tclose %Was temporary + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. + +\def\xkey{\key} +\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% +\ifx\one\xkey\ifx\threex\three \key{#2}% +\else\tclose{\look}\fi +\else\tclose{\look}\fi} + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of +% @dmn{}pt. +% +\def\dmn#1{\thinspace #1} + +\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} + +\def\l#1{{\li #1}\null} % + +\def\r#1{{\rm #1}} % roman font +% Use of \lowercase was suggested. +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\def\titlefont#1{{\titlerm #1}} + +\newif\ifseenauthor +\newif\iffinishedtitlepage + +\def\shorttitlepage{\parsearg\shorttitlepagezzz} +\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} + +\def\titlepage{\begingroup \parindent=0pt \textfonts + \let\subtitlerm=\tenrm +% I deinstalled the following change because \cmr12 is undefined. +% This change was not in the ChangeLog anyway. --rms. +% \let\subtitlerm=\cmr12 + \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% + % + \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% + % + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % + % Now you can print the title using @title. + \def\title{\parsearg\titlezzz}% + \def\titlezzz##1{\leftline{\titlefont{##1}} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Now you can put text using @subtitle. + \def\subtitle{\parsearg\subtitlezzz}% + \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% + % + % @author should come last, but may come many times. + \def\author{\parsearg\authorzzz}% + \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi + {\authorfont \leftline{##1}}}% + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + \oldpage + \let\page = \oldpage + \hbox{}}% +% \def\page{\oldpage \hbox{}} +} + +\def\Etitlepage{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + \HEADINGSon +} + +\def\finishtitlepage{% + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +%%% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks \evenheadline % Token sequence for heading line of even pages +\newtoks \oddheadline % Token sequence for heading line of odd pages +\newtoks \evenfootline % Token sequence for footing line of even pages +\newtoks \oddfootline % Token sequence for footing line of odd pages + +% Now make Tex use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline + \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline + \else \the\evenfootline \fi}\HEADINGShook} +\let\HEADINGShook=\relax + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + +\def\evenheading{\parsearg\evenheadingxxx} +\def\oddheading{\parsearg\oddheadingxxx} +\def\everyheading{\parsearg\everyheadingxxx} + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\oddfooting{\parsearg\oddfootingxxx} +\def\everyfooting{\parsearg\everyfootingxxx} + +{\catcode`\@=0 % + +\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} +\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} +\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish} +\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} +\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} +\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish} +\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} +% +}% unbind the catcode of @. + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. +% @headings singleafter turns on single-sided headings after this page. +% By default, they are off. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\HEADINGSoff{ +\global\evenheadline={\hfil} \global\evenfootline={\hfil} +\global\oddheadline={\hfil} \global\oddfootline={\hfil}} +\HEADINGSoff +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{ +%\pagealignmacro +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{ +%\pagealignmacro +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} +\def\HEADINGSon{\HEADINGSdouble} + +\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} +\let\HEADINGSdoubleafter=\HEADINGSafter +\def\HEADINGSdoublex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} + +\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} +\def\HEADINGSsinglex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +} + +% Subroutines used in generating headings +% Produces Day Month Year style of output. +\def\today{\number\day\space +\ifcase\month\or +January\or February\or March\or April\or May\or June\or +July\or August\or September\or October\or November\or December\fi +\space\number\year} + +% Use this if you want the Month Day, Year style of output. +%\def\today{\ifcase\month\or +%January\or February\or March\or April\or May\or June\or +%July\or August\or September\or October\or November\or December\fi +%\space\number\day, \number\year} + +% @settitle line... specifies the title of the document, for headings +% It generates no output of its own + +\def\thistitle{No Title} +\def\settitle{\parsearg\settitlezzz} +\def\settitlezzz #1{\gdef\thistitle{#1}} + +\message{tables,} + +% @tabs -- simple alignment + +% These don't work. For one thing, \+ is defined as outer. +% So these macros cannot even be defined. + +%\def\tabs{\parsearg\tabszzz} +%\def\tabszzz #1{\settabs\+#1\cr} +%\def\tabline{\parsearg\tablinezzz} +%\def\tablinezzz #1{\+#1\cr} +%\def\&{&} + +% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table, @vtable, and @vtable define @item, @itemx, etc., with +% these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\newif\ifitemxneedsnegativevskip + +\def\itemxpar{\par\ifitemxneedsnegativevskip\vskip-\parskip\nobreak\fi} + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\itemxpar \parsearg\itemzzz} + +\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} +\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} + +\def\internalBkitem{\smallbreak \parsearg\kitemzzz} +\def\internalBkitemx{\itemxpar \parsearg\kitemzzz} + +\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% + \itemzzz {#1}} + +\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% + \itemzzz {#1}} + +\def\itemzzz #1{\begingroup % + \advance\hsize by -\rightskip + \advance\hsize by -\tableindent + \setbox0=\hbox{\itemfont{#1}}% + \itemindex{#1}% + \nobreak % This prevents a break before @itemx. + % + % Be sure we are not still in the middle of a paragraph. + %{\parskip = 0in + %\par + %}% + % + % If the item text does not fit in the space we have, put it on a line + % by itself, and do not allow a page break either before or after that + % line. We do not start a paragraph here because then if the next + % command is, e.g., @kindex, the whatsit would get put into the + % horizontal list on a line by itself, resulting in extra blank space. + \ifdim \wd0>\itemmax + % + % Make this a paragraph so we get the \parskip glue and wrapping, + % but leave it ragged-right. + \begingroup + \advance\leftskip by-\tableindent + \advance\hsize by\tableindent + \advance\rightskip by0pt plus1fil + \leavevmode\unhbox0\par + \endgroup + % + % We're going to be starting a paragraph, but we don't want the + % \parskip glue -- logically it's part of the @item we just started. + \nobreak \vskip-\parskip + % + % Stop a page break at the \parskip glue coming up. Unfortunately + % we can't prevent a possible page break at the following + % \baselineskip glue. + \nobreak + \endgroup + \itemxneedsnegativevskipfalse + \else + % The item text fits into the space. Start a paragraph, so that the + % following text (if any) will end up on the same line. Since that + % text will be indented by \tableindent, we make the item text be in + % a zero-width box. + \noindent + \rlap{\hskip -\tableindent\box0}\ignorespaces% + \endgroup% + \itemxneedsnegativevskiptrue% + \fi +} + +\def\item{\errmessage{@item while not in a table}} +\def\itemx{\errmessage{@itemx while not in a table}} +\def\kitem{\errmessage{@kitem while not in a table}} +\def\kitemx{\errmessage{@kitemx while not in a table}} +\def\xitem{\errmessage{@xitem while not in a table}} +\def\xitemx{\errmessage{@xitemx while not in a table}} + +%% Contains a kludge to get @end[description] to work +\def\description{\tablez{\dontindex}{1}{}{}{}{}} + +\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} +{\obeylines\obeyspaces% +\gdef\tablex #1^^M{% +\tabley\dontindex#1 \endtabley}} + +\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} +{\obeylines\obeyspaces% +\gdef\ftablex #1^^M{% +\tabley\fnitemindex#1 \endtabley +\def\Eftable{\endgraf\afterenvbreak\endgroup}% +\let\Etable=\relax}} + +\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} +{\obeylines\obeyspaces% +\gdef\vtablex #1^^M{% +\tabley\vritemindex#1 \endtabley +\def\Evtable{\endgraf\afterenvbreak\endgroup}% +\let\Etable=\relax}} + +\def\dontindex #1{} +\def\fnitemindex #1{\doind {fn}{\code{#1}}}% +\def\vritemindex #1{\doind {vr}{\code{#1}}}% + +{\obeyspaces % +\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% +\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} + +\def\tablez #1#2#3#4#5#6{% +\aboveenvbreak % +\begingroup % +\def\Edescription{\Etable}% Necessary kludge. +\let\itemindex=#1% +\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % +\ifnum 0#4>0 \tableindent=#4\mil \fi % +\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % +\def\itemfont{#2}% +\itemmax=\tableindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \tableindent % +\exdentamount=\tableindent +\parindent = 0pt +\parskip = \smallskipamount +\ifdim \parskip=0pt \parskip=2pt \fi% +\def\Etable{\endgraf\afterenvbreak\endgroup}% +\let\item = \internalBitem % +\let\itemx = \internalBitemx % +\let\kitem = \internalBkitem % +\let\kitemx = \internalBkitemx % +\let\xitem = \internalBxitem % +\let\xitemx = \internalBxitemx % +} + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\def\itemize{\parsearg\itemizezzz} + +\def\itemizezzz #1{% + \begingroup % ended by the @end itemsize + \itemizey {#1}{\Eitemize} +} + +\def\itemizey #1#2{% +\aboveenvbreak % +\itemmax=\itemindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \itemindent % +\exdentamount=\itemindent +\parindent = 0pt % +\parskip = \smallskipamount % +\ifdim \parskip=0pt \parskip=2pt \fi% +\def#2{\endgraf\afterenvbreak\endgroup}% +\def\itemcontents{#1}% +\let\item=\itemizeitem} + +% Set sfcode to normal for the chars that usually have another value. +% These are `.?!:;,' +\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 + \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\def\enumerate{\parsearg\enumeratezzz} +\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + \begingroup % ended by the @end enumerate + % + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a <number>. + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call itemizey, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \itemizey{#1.}\Eenumerate\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + +% Definition of @item while inside @itemize. + +\def\itemizeitem{% +\advance\itemno by 1 +{\let\par=\endgraf \smallbreak}% +\ifhmode \errmessage{\in hmode at itemizeitem}\fi +{\parskip=0in \hskip 0pt +\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% +\vadjust{\penalty 1200}}% +\flushcr} + +% @multitable macros +% Amy Hendrickson, 8/18/94 +% +% @multitable ... @endmultitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @percentofhsize .2 .3 .5 +% @item ... +% +% Numbers following @percentofhsize are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. + + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab, @multicolumn or @endmulticolumn do not need to be on their +% own lines, but it will not hurt if they are. + +% Sample multitable: + +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @endmultitable + +% Default dimensions may be reset by user. +% @intableparskip will set vertical space between paragraphs in table. +% @intableparindent will set paragraph indent in table. +% @spacebetweencols will set horizontal space to be left between columns. +% @spacebetweenlines will set vertical space to be left between lines. + +%%%% +% Dimensions + +\newdimen\intableparskip +\newdimen\intableparindent +\newdimen\spacebetweencols +\newdimen\spacebetweenlines +\intableparskip=0pt +\intableparindent=6pt +\spacebetweencols=12pt +\spacebetweenlines=12pt + +%%%% +% Macros used to set up halign preamble: +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\percentofhsize\relax +\def\xpercentofhsize{\percentofhsize} +\newif\ifsetpercent + +\newcount\colcount +\def\setuptable#1{\def\firstarg{#1}% +\ifx\firstarg\xendsetuptable\let\go\relax% +\else + \ifx\firstarg\xpercentofhsize\global\setpercenttrue% + \else + \ifsetpercent + \if#1.\else% + \global\advance\colcount by1 % + \expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}% + \fi + \else + \global\advance\colcount by1 + \setbox0=\hbox{#1}% + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi% + \fi% + \let\go\setuptable% +\fi\go} +%%%% +% multitable syntax +\def\tab{&} + +%%%% +% @multitable ... @endmultitable definitions: + +\def\multitable#1\item{\bgroup +\let\item\cr +\tolerance=9500 +\hbadness=9500 +\parskip=\intableparskip +\parindent=\intableparindent +\overfullrule=0pt +\global\colcount=0\relax% +\def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}% + % To parse everything between @multitable and @item : +\def\one{#1}\expandafter\setuptable\one\endsetuptable + % Need to reset this to 0 after \setuptable. +\global\colcount=0\relax% + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. +\halign\bgroup&\global\advance\colcount by 1\relax% +\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname + % In order to keep entries from bumping into each other + % we will add a \leftskip of \spacebetweencols to all columns after + % the first one. + % If a template has been used, we will add \spacebetweencols + % to the width of each template entry. + % If user has set preamble in terms of percent of \hsize + % we will use that dimension as the width of the column, and + % the \leftskip will keep entries from bumping into each other. + % Table will start at left margin and final column will justify at + % right margin. +\ifnum\colcount=1 +\else + \ifsetpercent + \else + % If user has <not> set preamble in terms of percent of \hsize + % we will advance \hsize by \spacebetweencols + \advance\hsize by \spacebetweencols + \fi + % In either case we will make \leftskip=\spacebetweencols: +\leftskip=\spacebetweencols +\fi +\noindent##}\cr% + % \everycr will reset column counter, \colcount, at the end of + % each line. Every column entry will cause \colcount to advance by one. + % The table preamble + % looks at the current \colcount to find the correct column width. +\global\everycr{\noalign{\nointerlineskip\vskip\spacebetweenlines +\filbreak%% keeps underfull box messages off when table breaks over pages. +\global\colcount=0\relax}}} + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within \newindex. +{\catcode`\@=11 +\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} + +% \newindex {foo} defines an index named foo. +% It automatically defines \fooindex such that +% \fooindex ...rest of line... puts an entry in the index foo. +% It also defines \fooindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is foo. +% The name of an index should be no more than 2 characters long +% for the sake of vms. + +\def\newindex #1{ +\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\doindex {#1}} +} + +% @defindex foo == \newindex{foo} + +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. + +\def\newcodeindex #1{ +\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\docodeindex {#1}} +} + +\def\defcodeindex{\parsearg\newcodeindex} + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +\def\synindex #1 #2 {% +\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname +\expandafter\let\csname#1indfile\endcsname=\synindexfoo +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\doindex {#2}}% +} + +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +\def\syncodeindex #1 #2 {% +\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname +\expandafter\let\csname#1indfile\endcsname=\synindexfoo +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\noexpand\docodeindex {#2}}% +} + +% Define \doindex, the driver for all \fooindex macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it is "foo", the name of the index. + +% \doindex just uses \parsearg; it calls \doind for the actual work. +% This is because \doind is more useful to call from other macros. + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} +\def\singleindexer #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} +\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} + +\def\indexdummies{% +% Take care of the plain tex accent commands. +\def\"{\realbackslash "}% +\def\`{\realbackslash `}% +\def\'{\realbackslash '}% +\def\^{\realbackslash ^}% +\def\~{\realbackslash ~}% +\def\={\realbackslash =}% +\def\b{\realbackslash b}% +\def\c{\realbackslash c}% +\def\d{\realbackslash d}% +\def\u{\realbackslash u}% +\def\v{\realbackslash v}% +\def\H{\realbackslash H}% +% Take care of the plain tex special European modified letters. +\def\oe{\realbackslash oe}% +\def\ae{\realbackslash ae}% +\def\aa{\realbackslash aa}% +\def\OE{\realbackslash OE}% +\def\AE{\realbackslash AE}% +\def\AA{\realbackslash AA}% +\def\o{\realbackslash o}% +\def\O{\realbackslash O}% +\def\l{\realbackslash l}% +\def\L{\realbackslash L}% +\def\ss{\realbackslash ss}% +% Take care of texinfo commands likely to appear in an index entry. +\def\_{{\realbackslash _}}% +\def\w{\realbackslash w }% +\def\bf{\realbackslash bf }% +\def\rm{\realbackslash rm }% +\def\sl{\realbackslash sl }% +\def\sf{\realbackslash sf}% +\def\tt{\realbackslash tt}% +\def\gtr{\realbackslash gtr}% +\def\less{\realbackslash less}% +\def\hat{\realbackslash hat}% +\def\char{\realbackslash char}% +\def\TeX{\realbackslash TeX}% +\def\dots{\realbackslash dots }% +\def\copyright{\realbackslash copyright }% +\def\tclose##1{\realbackslash tclose {##1}}% +\def\code##1{\realbackslash code {##1}}% +\def\samp##1{\realbackslash samp {##1}}% +\def\t##1{\realbackslash r {##1}}% +\def\r##1{\realbackslash r {##1}}% +\def\i##1{\realbackslash i {##1}}% +\def\b##1{\realbackslash b {##1}}% +\def\cite##1{\realbackslash cite {##1}}% +\def\key##1{\realbackslash key {##1}}% +\def\file##1{\realbackslash file {##1}}% +\def\var##1{\realbackslash var {##1}}% +\def\kbd##1{\realbackslash kbd {##1}}% +\def\dfn##1{\realbackslash dfn {##1}}% +\def\emph##1{\realbackslash emph {##1}}% +\unsepspaces +} + +% If an index command is used in an @example environment, any spaces +% therein should become regular spaces in the raw index file, not the +% expansion of \tie (\\leavevmode \penalty \@M \ ). +{\obeyspaces + \gdef\unsepspaces{\obeyspaces\let =\space}} + +% \indexnofonts no-ops all font-change commands. +% This is used when outputting the strings to sort the index by. +\def\indexdummyfont#1{#1} +\def\indexdummytex{TeX} +\def\indexdummydots{...} + +\def\indexnofonts{% +% Just ignore accents. +\let\"=\indexdummyfont +\let\`=\indexdummyfont +\let\'=\indexdummyfont +\let\^=\indexdummyfont +\let\~=\indexdummyfont +\let\==\indexdummyfont +\let\b=\indexdummyfont +\let\c=\indexdummyfont +\let\d=\indexdummyfont +\let\u=\indexdummyfont +\let\v=\indexdummyfont +\let\H=\indexdummyfont +% Take care of the plain tex special European modified letters. +\def\oe{oe}% +\def\ae{ae}% +\def\aa{aa}% +\def\OE{OE}% +\def\AE{AE}% +\def\AA{AA}% +\def\o{o}% +\def\O{O}% +\def\l{l}% +\def\L{L}% +\def\ss{ss}% +\let\w=\indexdummyfont +\let\t=\indexdummyfont +\let\r=\indexdummyfont +\let\i=\indexdummyfont +\let\b=\indexdummyfont +\let\emph=\indexdummyfont +\let\strong=\indexdummyfont +\let\cite=\indexdummyfont +\let\sc=\indexdummyfont +%Don't no-op \tt, since it isn't a user-level command +% and is used in the definitions of the active chars like <, >, |... +%\let\tt=\indexdummyfont +\let\tclose=\indexdummyfont +\let\code=\indexdummyfont +\let\file=\indexdummyfont +\let\samp=\indexdummyfont +\let\kbd=\indexdummyfont +\let\key=\indexdummyfont +\let\var=\indexdummyfont +\let\TeX=\indexdummytex +\let\dots=\indexdummydots +} + +% To define \realbackslash, we must make \ not be an escape. +% We must first make another character (@) an escape +% so we do not become unable to do a definition. + +{\catcode`\@=0 \catcode`\\=\other +@gdef@realbackslash{\}} + +\let\indexbackslash=0 %overridden during \printindex. + +\let\SETmarginindex=\relax %initialize! +% workhorse for all \fooindexes +% #1 is name of index, #2 is stuff to put there +\def\doind #1#2{% +% Put the index entry in the margin if desired. +\ifx\SETmarginindex\relax\else% +\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% +\fi% +{\count10=\lastpenalty % +{\indexdummies % Must do this here, since \bf, etc expand at this stage +\escapechar=`\\% +{\let\folio=0% Expand all macros now EXCEPT \folio +\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now +% so it will be output as is; and it will print as backslash in the indx. +% +% Now process the index-string once, with all font commands turned off, +% to get the string to sort the index by. +{\indexnofonts +\xdef\temp1{#2}% +}% +% Now produce the complete index entry. We process the index-string again, +% this time with font commands expanded, to get what to print in the index. +\edef\temp{% +\write \csname#1indfile\endcsname{% +\realbackslash entry {\temp1}{\folio}{#2}}}% +\temp }% +}\penalty\count10}} + +\def\dosubind #1#2#3{% +{\count10=\lastpenalty % +{\indexdummies % Must do this here, since \bf, etc expand at this stage +\escapechar=`\\% +{\let\folio=0% +\def\rawbackslashxx{\indexbackslash}% +% +% Now process the index-string once, with all font commands turned off, +% to get the string to sort the index by. +{\indexnofonts +\xdef\temp1{#2 #3}% +}% +% Now produce the complete index entry. We process the index-string again, +% this time with font commands expanded, to get what to print in the index. +\edef\temp{% +\write \csname#1indfile\endcsname{% +\realbackslash entry {\temp1}{\folio}{#2}{#3}}}% +\temp }% +}\penalty\count10}} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% This is what you call to cause a particular index to get printed. +% Write +% @unnumbered Function Index +% @printindex fn + +\def\printindex{\parsearg\doprintindex} + +\def\doprintindex#1{% + \tex + \dobreak \chapheadingskip {10000} + \catcode`\%=\other\catcode`\&=\other\catcode`\#=\other + \catcode`\$=\other + \catcode`\~=\other + \indexbreaks + % + % The following don't help, since the chars were translated + % when the raw index was written, and their fonts were discarded + % due to \indexnofonts. + %\catcode`\"=\active + %\catcode`\^=\active + %\catcode`\_=\active + %\catcode`\|=\active + %\catcode`\<=\active + %\catcode`\>=\active + % % + \def\indexbackslash{\rawbackslashxx} + \indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt + \begindoublecolumns + % + % See if the index file exists and is nonempty. + \openin 1 \jobname.#1s + \ifeof 1 + % \enddoublecolumns gets confused if there is no text in the index, + % and it loses the chapter title and the aux file entries for the + % index. The easiest way to prevent this problem is to make sure + % there is some text. + (Index is nonexistent) + \else + % + % If the index file exists but is empty, then \openin leaves \ifeof + % false. We have to make TeX try to read something from the file, so + % it can discover if there is anything in it. + \read 1 to \temp + \ifeof 1 + (Index is empty) + \else + \input \jobname.#1s + \fi + \fi + \closein 1 + \enddoublecolumns + \Etex +} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +% Same as \bigskipamount except no shrink. +% \balancecolumns gets confused if there is any shrink. +\newskip\initialskipamount \initialskipamount 12pt plus4pt + +\def\initial #1{% +{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt +\ifdim\lastskip<\initialskipamount +\removelastskip \penalty-200 \vskip \initialskipamount\fi +\line{\secbf#1\hfill}\kern 2pt\penalty10000}} + +% This typesets a paragraph consisting of #1, dot leaders, and then #2 +% flush to the right margin. It is used for index and table of contents +% entries. The paragraph is indented by \leftskip. +% +\def\entry #1#2{\begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent=2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % Start a ``paragraph'' for the index entry so the line breaking + % parameters we've set above will have an effect. + \noindent + % + % Insert the text of the index entry. TeX will do line-breaking on it. + #1% + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \def\tempa{{\rm }}% + \def\tempb{#2}% + \edef\tempc{\tempa}% + \edef\tempd{\tempb}% + \ifx\tempc\tempd\ \else% + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ #2% The page number ends the paragraph. + \fi% + \par +\endgroup} + +% Like \dotfill except takes at least 1 em. +\def\indexdotfill{\cleaders + \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm + +\def\secondary #1#2{ +{\parfillskip=0in \parskip=0in +\hangindent =1in \hangafter=1 +\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par +}} + +%% Define two-column mode, which is used in indexes. +%% Adapted from the TeXbook, page 416. +\catcode `\@=11 + +\newbox\partialpage + +\newdimen\doublecolumnhsize + +\def\begindoublecolumns{\begingroup + % Grab any single-column material above us. + \output = {\global\setbox\partialpage + =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}% + \eject + % + % Now switch to the double-column output routine. + \output={\doublecolumnout}% + % + % Change the page size parameters. We could do this once outside this + % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 + % format, but then we repeat the same computation. Repeating a couple + % of assignments once per index is clearly meaningless for the + % execution time, so we may as well do it once. + % + % First we halve the line length, less a little for the gutter between + % the columns. We compute the gutter based on the line length, so it + % changes automatically with the paper format. The magic constant + % below is chosen so that the gutter has the same value (well, +- < + % 1pt) as it did when we hard-coded it. + % + % We put the result in a separate register, \doublecolumhsize, so we + % can restore it in \pagesofar, after \hsize itself has (potentially) + % been clobbered. + % + \doublecolumnhsize = \hsize + \advance\doublecolumnhsize by -.04154\hsize + \divide\doublecolumnhsize by 2 + \hsize = \doublecolumnhsize + % + % Double the \vsize as well. (We don't need a separate register here, + % since nobody clobbers \vsize.) + \vsize = 2\vsize + \doublecolumnpagegoal +} + +\def\enddoublecolumns{\eject \endgroup \pagegoal=\vsize \unvbox\partialpage} + +\def\doublecolumnsplit{\splittopskip=\topskip \splitmaxdepth=\maxdepth + \global\dimen@=\pageheight \global\advance\dimen@ by-\ht\partialpage + \global\setbox1=\vsplit255 to\dimen@ \global\setbox0=\vbox{\unvbox1} + \global\setbox3=\vsplit255 to\dimen@ \global\setbox2=\vbox{\unvbox3} + \ifdim\ht0>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi + \ifdim\ht2>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi +} +\def\doublecolumnpagegoal{% + \dimen@=\vsize \advance\dimen@ by-2\ht\partialpage \global\pagegoal=\dimen@ +} +\def\pagesofar{\unvbox\partialpage % + \hsize=\doublecolumnhsize % have to restore this since output routine + \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}} +\def\doublecolumnout{% + \setbox5=\copy255 + {\vbadness=10000 \doublecolumnsplit} + \ifvbox255 + \setbox0=\vtop to\dimen@{\unvbox0} + \setbox2=\vtop to\dimen@{\unvbox2} + \onepageout\pagesofar \unvbox255 \penalty\outputpenalty + \else + \setbox0=\vbox{\unvbox5} + \ifvbox0 + \dimen@=\ht0 \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip + \divide\dimen@ by2 \splittopskip=\topskip \splitmaxdepth=\maxdepth + {\vbadness=10000 + \loop \global\setbox5=\copy0 + \setbox1=\vsplit5 to\dimen@ + \setbox3=\vsplit5 to\dimen@ + \ifvbox5 \global\advance\dimen@ by1pt \repeat + \setbox0=\vbox to\dimen@{\unvbox1} + \setbox2=\vbox to\dimen@{\unvbox3} + \global\setbox\partialpage=\vbox{\pagesofar} + \doublecolumnpagegoal + } + \fi + \fi +} + +\catcode `\@=\other +\message{sectioning,} +% Define chapters, sections, etc. + +\newcount \chapno +\newcount \secno \secno=0 +\newcount \subsecno \subsecno=0 +\newcount \subsubsecno \subsubsecno=0 + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount \appendixno \appendixno = `\@ +\def\appendixletter{\char\the\appendixno} + +\newwrite \contentsfile +% This is called from \setfilename. +\def\opencontents{\openout \contentsfile = \jobname.toc} + +% Each @chapter defines this as the name of the chapter. +% page headings and footings can use it. @section does likewise + +\def\thischapter{} \def\thissection{} +\def\seccheck#1{\if \pageno<0 % +\errmessage{@#1 not allowed after generating table of contents}\fi +% +} + +\def\chapternofonts{% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\def\result{\realbackslash result} +\def\equiv{\realbackslash equiv} +\def\expansion{\realbackslash expansion} +\def\print{\realbackslash print} +\def\TeX{\realbackslash TeX} +\def\dots{\realbackslash dots} +\def\copyright{\realbackslash copyright} +\def\tt{\realbackslash tt} +\def\bf{\realbackslash bf } +\def\w{\realbackslash w} +\def\less{\realbackslash less} +\def\gtr{\realbackslash gtr} +\def\hat{\realbackslash hat} +\def\char{\realbackslash char} +\def\tclose##1{\realbackslash tclose {##1}} +\def\code##1{\realbackslash code {##1}} +\def\samp##1{\realbackslash samp {##1}} +\def\r##1{\realbackslash r {##1}} +\def\b##1{\realbackslash b {##1}} +\def\key##1{\realbackslash key {##1}} +\def\file##1{\realbackslash file {##1}} +\def\kbd##1{\realbackslash kbd {##1}} +% These are redefined because @smartitalic wouldn't work inside xdef. +\def\i##1{\realbackslash i {##1}} +\def\cite##1{\realbackslash cite {##1}} +\def\var##1{\realbackslash var {##1}} +\def\emph##1{\realbackslash emph {##1}} +\def\dfn##1{\realbackslash dfn {##1}} +} + +\newcount\absseclevel % used to calculate proper heading level +\newcount\secbase\secbase=0 % @raise/lowersections modify this count + +% @raisesections: treat @section as chapter, @subsection as section, etc. +\def\raisesections{\global\advance\secbase by -1} +\let\up=\raisesections % original BFox name + +% @lowersections: treat @chapter as section, @section as subsection, etc. +\def\lowersections{\global\advance\secbase by 1} +\let\down=\lowersections % original BFox name + +% Choose a numbered-heading macro +% #1 is heading level if unmodified by @raisesections or @lowersections +% #2 is text for heading +\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \chapterzzz{#2} +\or + \seczzz{#2} +\or + \numberedsubseczzz{#2} +\or + \numberedsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \chapterzzz{#2} + \else + \numberedsubsubseczzz{#2} + \fi +\fi +} + +% like \numhead, but chooses appendix heading levels +\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \appendixzzz{#2} +\or + \appendixsectionzzz{#2} +\or + \appendixsubseczzz{#2} +\or + \appendixsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \appendixzzz{#2} + \else + \appendixsubsubseczzz{#2} + \fi +\fi +} + +% like \numhead, but chooses numberless heading levels +\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \unnumberedzzz{#2} +\or + \unnumberedseczzz{#2} +\or + \unnumberedsubseczzz{#2} +\or + \unnumberedsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \unnumberedzzz{#2} + \else + \unnumberedsubsubseczzz{#2} + \fi +\fi +} + + +\def\thischaptername{No Chapter Title} +\outer\def\chapter{\parsearg\chapteryyy} +\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz #1{\seccheck{chapter}% +\secno=0 \subsecno=0 \subsubsecno=0 +\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}% +\chapmacro {#1}{\the\chapno}% +\gdef\thissection{#1}% +\gdef\thischaptername{#1}% +% We don't substitute the actual chapter name into \thischapter +% because we don't want its macros evaluated now. +\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% +{\chapternofonts% +\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\global\let\section = \numberedsec +\global\let\subsection = \numberedsubsec +\global\let\subsubsection = \numberedsubsubsec +}} + +\outer\def\appendix{\parsearg\appendixyyy} +\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz +\def\appendixzzz #1{\seccheck{appendix}% +\secno=0 \subsecno=0 \subsubsecno=0 +\global\advance \appendixno by 1 \message{Appendix \appendixletter}% +\chapmacro {#1}{\putwordAppendix{} \appendixletter}% +\gdef\thissection{#1}% +\gdef\thischaptername{#1}% +\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% +{\chapternofonts% +\edef\temp{{\realbackslash chapentry + {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\appendixnoderef % +\global\let\section = \appendixsec +\global\let\subsection = \appendixsubsec +\global\let\subsubsection = \appendixsubsubsec +}} + +\outer\def\top{\parsearg\unnumberedyyy} +\outer\def\unnumbered{\parsearg\unnumberedyyy} +\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz #1{\seccheck{unnumbered}% +\secno=0 \subsecno=0 \subsubsecno=0 +% +% This used to be simply \message{#1}, but TeX fully expands the +% argument to \message. Therefore, if #1 contained @-commands, TeX +% expanded them. For example, in `@unnumbered The @cite{Book}', TeX +% expanded @cite (which turns out to cause errors because \cite is meant +% to be executed, not expanded). +% +% Anyway, we don't want the fully-expanded definition of @cite to appear +% as a result of the \message, we just want `@cite' itself. We use +% \the<toks register> to achieve this: TeX expands \the<toks> only once, +% simply yielding the contents of the <toks register>. +\toks0 = {#1}\message{(\the\toks0)}% +% +\unnumbchapmacro {#1}% +\gdef\thischapter{#1}\gdef\thissection{#1}% +{\chapternofonts% +\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\global\let\section = \unnumberedsec +\global\let\subsection = \unnumberedsubsec +\global\let\subsubsection = \unnumberedsubsubsec +}} + +\outer\def\numberedsec{\parsearg\secyyy} +\def\secyyy #1{\numhead1{#1}} % normally calls seczzz +\def\seczzz #1{\seccheck{section}% +\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % +\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% +{\chapternofonts% +\edef\temp{{\realbackslash secentry % +{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +}} + +\outer\def\appendixsection{\parsearg\appendixsecyyy} +\outer\def\appendixsec{\parsearg\appendixsecyyy} +\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz #1{\seccheck{appendixsection}% +\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % +\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% +{\chapternofonts% +\edef\temp{{\realbackslash secentry % +{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\appendixnoderef % +\penalty 10000 % +}} + +\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} +\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz #1{\seccheck{unnumberedsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +{\chapternofonts% +\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +}} + +\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} +\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz #1{\seccheck{subsection}% +\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % +\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% +{\chapternofonts% +\edef\temp{{\realbackslash subsecentry % +{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +}} + +\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} +\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz #1{\seccheck{appendixsubsec}% +\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % +\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% +{\chapternofonts% +\edef\temp{{\realbackslash subsecentry % +{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\appendixnoderef % +\penalty 10000 % +}} + +\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} +\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +{\chapternofonts% +\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +}} + +\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} +\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz #1{\seccheck{subsubsection}% +\gdef\thissection{#1}\global\advance \subsubsecno by 1 % +\subsubsecheading {#1} + {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% +{\chapternofonts% +\edef\temp{{\realbackslash subsubsecentry % + {#1} + {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno} + {\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\donoderef % +\penalty 10000 % +}} + +\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} +\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}% +\gdef\thissection{#1}\global\advance \subsubsecno by 1 % +\subsubsecheading {#1} + {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% +{\chapternofonts% +\edef\temp{{\realbackslash subsubsecentry{#1}% + {\appendixletter} + {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\appendixnoderef % +\penalty 10000 % +}} + +\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} +\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}% +\plainsecheading {#1}\gdef\thissection{#1}% +{\chapternofonts% +\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}% +\escapechar=`\\% +\write \contentsfile \temp % +\unnumbnoderef % +\penalty 10000 % +}} + +% These are variants which are not "outer", so they can appear in @ifinfo. +% Actually, they should now be obsolete; ordinary section commands should work. +\def\infotop{\parsearg\unnumberedzzz} +\def\infounnumbered{\parsearg\unnumberedzzz} +\def\infounnumberedsec{\parsearg\unnumberedseczzz} +\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} +\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} + +\def\infoappendix{\parsearg\appendixzzz} +\def\infoappendixsec{\parsearg\appendixseczzz} +\def\infoappendixsubsec{\parsearg\appendixsubseczzz} +\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} + +\def\infochapter{\parsearg\chapterzzz} +\def\infosection{\parsearg\sectionzzz} +\def\infosubsection{\parsearg\subsectionzzz} +\def\infosubsubsection{\parsearg\subsubsectionzzz} + +% These macros control what the section commands do, according +% to what kind of chapter we are in (ordinary, appendix, or unnumbered). +% Define them by default for a numbered chapter. +\global\let\section = \numberedsec +\global\let\subsection = \numberedsubsec +\global\let\subsubsection = \numberedsubsubsec + +% Define @majorheading, @heading and @subheading + +% NOTE on use of \vbox for chapter headings, section headings, and +% such: +% 1) We use \vbox rather than the earlier \line to permit +% overlong headings to fold. +% 2) \hyphenpenalty is set to 10000 because hyphenation in a +% heading is obnoxious; this forbids it. +% 3) Likewise, headings look best if no \parindent is used, and +% if justification is not attempted. Hence \raggedright. + + +\def\majorheading{\parsearg\majorheadingzzz} +\def\majorheadingzzz #1{% +{\advance\chapheadingskip by 10pt \chapbreak }% +{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\penalty 200} + +\def\chapheading{\parsearg\chapheadingzzz} +\def\chapheadingzzz #1{\chapbreak % +{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\penalty 200} + +\def\heading{\parsearg\secheadingi} + +\def\subheading{\parsearg\subsecheadingi} + +\def\subsubheading{\parsearg\subsubsecheadingi} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +%%% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} + +%%% Define plain chapter starts, and page on/off switching for it +% Parameter controlling skip before chapter headings (if needed) + +\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt + +\def\chapbreak{\dobreak \chapheadingskip {-4000}} +\def\chappager{\par\vfill\supereject} +\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{ +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{ +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{ +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +\def\CHAPFplain{ +\global\let\chapmacro=\chfplain +\global\let\unnumbchapmacro=\unnchfplain} + +\def\chfplain #1#2{% + \pchapsepmacro + {% + \chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #2\enspace #1}% + }% + \bigskip + \penalty5000 +} + +\def\unnchfplain #1{% +\pchapsepmacro % +{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\penalty 10000 % +} +\CHAPFplain % The default + +\def\unnchfopen #1{% +\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\penalty 10000 % +} + +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} + +\def\CHAPFopen{ +\global\let\chapmacro=\chfopen +\global\let\unnumbchapmacro=\unnchfopen} + +% Parameter controlling skip before section headings. + +\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt +\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} + +\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt +\def\secheadingbreak{\dobreak \secheadingskip {-1000}} + +% @paragraphindent is defined for the Info formatting commands only. +\let\paragraphindent=\comment + +% Section fonts are the base font at magstep2, which produces +% a size a bit more than 14 points in the default situation. + +\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}} +\def\plainsecheading #1{\secheadingi {#1}} +\def\secheadingi #1{{\advance \secheadingskip by \parskip % +\secheadingbreak}% +{\secfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } + + +% Subsection fonts are the base font at magstep1, +% which produces a size of 12 points. + +\def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}} +\def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip % +\subsecheadingbreak}% +{\subsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } + +\def\subsubsecfonts{\subsecfonts} % Maybe this should change: + % Perhaps make sssec fonts scaled + % magstep half +\def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}} +\def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip % +\subsecheadingbreak}% +{\subsubsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}% +\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000} + + +\message{toc printing,} + +% Finish up the main text and prepare to read what we've written +% to \contentsfile. + +\newskip\contentsrightmargin \contentsrightmargin=1in +\def\startcontents#1{% + \pagealignmacro + \immediate\closeout \contentsfile + \ifnum \pageno>0 + \pageno = -1 % Request roman numbered pages. + \fi + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \unnumbchapmacro{#1}\def\thischapter{}% + \begingroup % Set up to handle contents files properly. + \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 + \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. +} + + +% Normal (long) toc. +\outer\def\contents{% + \startcontents{\putwordTableofContents}% + \input \jobname.toc + \endgroup + \vfill \eject +} + +% And just the chapters. +\outer\def\summarycontents{% + \startcontents{\putwordShortContents}% + % + \let\chapentry = \shortchapentry + \let\unnumbchapentry = \shortunnumberedentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl + \rm + \advance\baselineskip by 1pt % Open it up a little. + \def\secentry ##1##2##3##4{} + \def\unnumbsecentry ##1##2{} + \def\subsecentry ##1##2##3##4##5{} + \def\unnumbsubsecentry ##1##2{} + \def\subsubsecentry ##1##2##3##4##5##6{} + \def\unnumbsubsubsecentry ##1##2{} + \input \jobname.toc + \endgroup + \vfill \eject +} +\let\shortcontents = \summarycontents + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Chapter-level things, for both the long and short contents. +\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} + +% See comments in \dochapentry re vbox and related settings +\def\shortchapentry#1#2#3{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}% +} + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter. +% We could simplify the code here by writing out an \appendixentry +% command in the toc file for appendices, instead of using \chapentry +% for both, but it doesn't seem worth it. +\setbox0 = \hbox{\shortcontrm \putwordAppendix } +\newdimen\shortappendixwidth \shortappendixwidth = \wd0 + +\def\shortchaplabel#1{% + % We typeset #1 in a box of constant width, regardless of the text of + % #1, so the chapter titles will come out aligned. + \setbox0 = \hbox{#1}% + \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi + % + % This space should be plenty, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in in \shortchapentry above.) + \advance\dimen0 by 1.1em + \hbox to \dimen0{#1\hfil}% +} + +\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} +\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}} + +% Sections. +\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} +\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} + +% Subsections. +\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} +\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} + +% And subsubsections. +\def\subsubsecentry#1#2#3#4#5#6{% + \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} +\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} + + +% This parameter controls the indentation of the various levels. +\newdimen\tocindent \tocindent = 3pc + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we would want to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip\baselineskip + \begingroup + \chapentryfonts + \tocentry{#1}{\dopageno{#2}}% + \endgroup + \nobreak\vskip .25\baselineskip +} + +\def\dosecentry#1#2{\begingroup + \secentryfonts \leftskip=\tocindent + \tocentry{#1}{\dopageno{#2}}% +\endgroup} + +\def\dosubsecentry#1#2{\begingroup + \subsecentryfonts \leftskip=2\tocindent + \tocentry{#1}{\dopageno{#2}}% +\endgroup} + +\def\dosubsubsecentry#1#2{\begingroup + \subsubsecentryfonts \leftskip=3\tocindent + \tocentry{#1}{\dopageno{#2}}% +\endgroup} + +% Final typesetting of a toc entry; we use the same \entry macro as for +% the index entries, but we want to suppress hyphenation here. (We +% can't do that in the \entry macro, since index entries might consist +% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) +% +% \turnoffactive is for the sake of @" used for umlauts. +\def\tocentry#1#2{\begingroup + \hyphenpenalty = 10000 + \entry{\turnoffactive #1}{\turnoffactive #2}% +\endgroup} + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\let\subsecentryfonts = \textfonts +\let\subsubsecentryfonts = \textfonts + + +\message{environments,} + +% Since these characters are used in examples, it should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% Furthermore, these definitions must come after we define our fonts. +\newbox\dblarrowbox \newbox\longdblarrowbox +\newbox\pushcharbox \newbox\bullbox +\newbox\equivbox \newbox\errorbox + +\let\ptexequiv = \equiv + +%{\tentt +%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil} +%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil} +%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil} +%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil} +% Adapted from the manmac format (p.420 of TeXbook) +%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex +% depth .1ex\hfil} +%} + +\def\point{$\star$} + +\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} + +\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% Adapted from the TeXbook's \boxit. +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} + +\global\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{ + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} + +% The @error{} command. +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @tex ... @end tex escapes into raw Tex temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain tex @ character. + +\def\tex{\begingroup +\catcode `\\=0 \catcode `\{=1 \catcode `\}=2 +\catcode `\$=3 \catcode `\&=4 \catcode `\#=6 +\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie +\catcode `\%=14 +\catcode 43=12 +\catcode`\"=12 +\catcode`\==12 +\catcode`\|=12 +\catcode`\<=12 +\catcode`\>=12 +\escapechar=`\\ +% +\let\~=\ptextilde +\let\{=\ptexlbrace +\let\}=\ptexrbrace +\let\.=\ptexdot +\let\*=\ptexstar +\let\dots=\ptexdots +\def\@{@}% +\let\bullet=\ptexbullet +\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl +\let\L=\ptexL +% +\let\Etex=\endgroup} + +% Define @lisp ... @endlisp. +% @lisp does a \begingroup so it can rebind things, +% including the definition of @endlisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^^M gets inside @lisp, @example, and other +% such environments. \null is better than a space, since it doesn't +% have any width. +\def\lisppar{\null\endgraf} + +% Make each space character in the input produce a normal interword +% space in the output. Don't allow a line break at this space, as this +% is used only in environments like @example, where each line of input +% should produce a line of output anyway. +% +{\obeyspaces % +\gdef\sepspaces{\obeyspaces\let =\tie}} + +% Define \obeyedspace to be our active space, whatever it is. This is +% for use in \parsearg. +{\sepspaces% +\global\let\obeyedspace= } + +% This space is always present above and below environments. +\newskip\envskipamount \envskipamount = 0pt + +% Make spacing and below environment symmetrical. We use \parskip here +% to help in doing that, since in @example-like environments \parskip +% is reset to zero; thus the \afterenvbreak inserts no space -- but the +% start of the next paragraph will insert \parskip +% +\def\aboveenvbreak{{\advance\envskipamount by \parskip +\endgraf \ifdim\lastskip<\envskipamount +\removelastskip \penalty-50 \vskip\envskipamount \fi}} + +\let\afterenvbreak = \aboveenvbreak + +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. +\let\nonarrowing=\relax + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \cartouche: draw rectangle w/rounded corners around argument +\font\circle=lcircle10 +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip +\circthick=\fontdimen8\circle +% +\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth +\def\ctr{{\hskip 6pt\circle\char'010}} +\def\cbl{{\circle\char'012\hskip -6pt}} +\def\cbr{{\hskip 6pt\circle\char'011}} +\def\carttop{\hbox to \cartouter{\hskip\lskip + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} +\def\cartbot{\hbox to \cartouter{\hskip\lskip + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} +% +\newskip\lskip\newskip\rskip + +\long\def\cartouche{% +\begingroup + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt %we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18pt % allow for 3pt kerns on either +% side, and for 6pt waste from +% each corner char + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing=\comment + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \hsize=\cartinner + \kern3pt + \begingroup + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip +\def\Ecartouche{% + \endgroup + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup +\endgroup +}} + + +% This macro is called at the beginning of all the @example variants, +% inside a group. +\def\nonfillstart{% + \aboveenvbreak + \inENV % This group ends at the end of the body + \hfuzz = 12pt % Don't be fussy + \sepspaces % Make spaces be word-separators rather than space tokens. + \singlespace + \let\par = \lisppar % don't ignore blank lines + \obeylines % each line of input is a line of output + \parskip = 0pt + \parindent = 0pt + \emergencystretch = 0pt % don't try to avoid overfull boxes + % @cartouche defines \nonarrowing to inhibit narrowing + % at next level down. + \ifx\nonarrowing\relax + \advance \leftskip by \lispnarrowing + \exdentamount=\lispnarrowing + \let\exdent=\nofillexdent + \let\nonarrowing=\relax + \fi +} + +% To ending an @example-like environment, we first end the paragraph +% (via \afterenvbreak's vertical glue), and then the group. That way we +% keep the zero \parskip that the environments set -- \parskip glue +% will be inserted at the beginning of the next paragraph in the +% document, after the environment. +% +\def\nonfillfinish{\afterenvbreak\endgroup}% + +% This macro is +\def\lisp{\begingroup + \nonfillstart + \let\Elisp = \nonfillfinish + \tt + \rawbackslash % have \ input char produce \ char from current font + \gobble +} + +% Define the \E... control sequence only if we are inside the +% environment, so the error checking in \end will work. +% +% We must call \lisp last in the definition, since it reads the +% return following the @example (or whatever) command. +% +\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} +\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp} +\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp} + +% @smallexample and @smalllisp. This is not used unless the @smallbook +% command is given. Originally contributed by Pavel@xerox. +% +\def\smalllispx{\begingroup + \nonfillstart + \let\Esmalllisp = \nonfillfinish + \let\Esmallexample = \nonfillfinish + % + % Smaller interline space and fonts for small examples. + \setleading{10pt}% + \indexfonts \tt + \rawbackslash % make \ output the \ character from the current font (tt) + \gobble +} + +% This is @display; same as @lisp except use roman font. +% +\def\display{\begingroup + \nonfillstart + \let\Edisplay = \nonfillfinish + \gobble +} + +% This is @format; same as @display except don't narrow margins. +% +\def\format{\begingroup + \let\nonarrowing = t + \nonfillstart + \let\Eformat = \nonfillfinish + \gobble +} + +% @flushleft (same as @format) and @flushright. +% +\def\flushleft{\begingroup + \let\nonarrowing = t + \nonfillstart + \let\Eflushleft = \nonfillfinish + \gobble +} +\def\flushright{\begingroup + \let\nonarrowing = t + \nonfillstart + \let\Eflushright = \nonfillfinish + \advance\leftskip by 0pt plus 1fill + \gobble} + +% @quotation does normal linebreaking (hence we can't use \nonfillstart) +% and narrows the margins. +% +\def\quotation{% + \begingroup\inENV %This group ends at the end of the @quotation body + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \singlespace + \parindent=0pt + % We have retained a nonzero parskip for the environment, since we're + % doing normal filling. So to avoid extra space below the environment... + \def\Equotation{\parskip = 0pt \nonfillfinish}% + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \advance\rightskip by \lispnarrowing + \exdentamount = \lispnarrowing + \let\nonarrowing = \relax + \fi +} + +\message{defuns,} +% Define formatter for defuns +% First, allow user to change definition object font (\df) internally +\def\setdeffont #1 {\csname DEF#1\endcsname} + +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deftypemargin \deftypemargin=12pt +\newskip\deflastargmargin \deflastargmargin=18pt + +\newcount\parencount +% define \functionparens, which makes ( and ) and & do special things. +% \functionparens affects the group it is contained in. +\def\activeparens{% +\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active +\catcode`\[=\active \catcode`\]=\active} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +\global\let(=\lparen \global\let)=\rparen +\global\let[=\lbrack \global\let]=\rbrack + +\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } +\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} +% This is used to turn on special parens +% but make & act ordinary (given that it's active). +\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} + +% Definitions of (, ) and & used in args for functions. +% This is the definition of ( outside of all parentheses. +\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested % +\global\advance\parencount by 1 } +% +% This is the definition of ( when already inside a level of parens. +\gdef\opnested{\char`\(\global\advance\parencount by 1 } +% +\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. +% also in that case restore the outer-level definition of (. +\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi +\global\advance \parencount by -1 } +% If we encounter &foo, then turn on ()-hacking afterwards +\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } +% +\gdef\normalparens{\boldbrax\let&=\ampnr} +} % End of definition inside \activeparens +%% These parens (in \boldbrax) actually are a little bolder than the +%% contained text. This is especially needed for [ and ] +\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&} +\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}} + +% First, defname, which formats the header line itself. +% #1 should be the function name. +% #2 should be the type of definition, such as "Function". + +\def\defname #1#2{% +% Get the values of \leftskip and \rightskip as they were +% outside the @def... +\dimen2=\leftskip +\advance\dimen2 by -\defbodyindent +\dimen3=\rightskip +\advance\dimen3 by -\defbodyindent +\noindent % +\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% +\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line +\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations +\parshape 2 0in \dimen0 \defargsindent \dimen1 % +% Now output arg 2 ("Function" or some such) +% ending at \deftypemargin from the right margin, +% but stuck inside a box of width 0 so it does not interfere with linebreaking +{% Adjust \hsize to exclude the ambient margins, +% so that \rightline will obey them. +\advance \hsize by -\dimen2 \advance \hsize by -\dimen3 +\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}% +% Make all lines underfull and no complaints: +\tolerance=10000 \hbadness=10000 +\advance\leftskip by -\defbodyindent +\exdentamount=\defbodyindent +{\df #1}\enskip % Generate function name +} + +% Actually process the body of a definition +% #1 should be the terminating control sequence, such as \Edefun. +% #2 should be the "another name" control sequence, such as \defunx. +% #3 should be the control sequence that actually processes the header, +% such as \defunheader. + +\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% +\parindent=0in +\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\exdentamount=\defbodyindent +\begingroup % +\catcode 61=\active % 61 is `=' +\obeylines\activeparens\spacesplit#3} + +\def\defmethparsebody #1#2#3#4 {\begingroup\inENV % +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% +\parindent=0in +\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\exdentamount=\defbodyindent +\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} + +\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2##1 ##2 {\def#4{##1}% +\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% +\parindent=0in +\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\exdentamount=\defbodyindent +\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} + +% These parsing functions are similar to the preceding ones +% except that they do not make parens into active characters. +% These are used for "variables" since they have no arguments. + +\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2{\begingroup\obeylines\spacesplit#3}% +\parindent=0in +\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\exdentamount=\defbodyindent +\begingroup % +\catcode 61=\active % +\obeylines\spacesplit#3} + +% This is used for \def{tp,vr}parsebody. It could probably be used for +% some of the others, too, with some judicious conditionals. +% +\def\parsebodycommon#1#2#3{% + \begingroup\inENV % + \medbreak % + % Define the end token that this defining construct specifies + % so that it will exit this group. + \def#1{\endgraf\endgroup\medbreak}% + \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% + \parindent=0in + \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent + \exdentamount=\defbodyindent + \begingroup\obeylines +} + +\def\defvrparsebody#1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \spacesplit{#3{#4}}% +} + +% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the +% type is just `struct', because we lose the braces in `{struct +% termios}' when \spacesplit reads its undelimited argument. Sigh. +% \let\deftpparsebody=\defvrparsebody +% +% So, to get around this, we put \empty in with the type name. That +% way, TeX won't find exactly `{...}' as an undelimited argument, and +% won't strip off the braces. +% +\def\deftpparsebody #1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \spacesplit{\parsetpheaderline{#3{#4}}}\empty +} + +% Fine, but then we have to eventually remove the \empty *and* the +% braces (if any). That's what this does, putting the result in \tptemp. +% +\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}% + +% After \spacesplit has done its work, this is called -- #1 is the final +% thing to call, #2 the type name (which starts with \empty), and #3 +% (which might be empty) the arguments. +% +\def\parsetpheaderline#1#2#3{% + \removeemptybraces#2\relax + #1{\tptemp}{#3}% +}% + +\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % +\medbreak % +% Define the end token that this defining construct specifies +% so that it will exit this group. +\def#1{\endgraf\endgroup\medbreak}% +\def#2##1 ##2 {\def#4{##1}% +\begingroup\obeylines\spacesplit{#3{##2}}}% +\parindent=0in +\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\exdentamount=\defbodyindent +\begingroup\obeylines\spacesplit{#3{#5}}} + +% Split up #2 at the first space token. +% call #1 with two arguments: +% the first is all of #2 before the space token, +% the second is all of #2 after that space token. +% If #2 contains no space token, all of it is passed as the first arg +% and the second is passed as empty. + +{\obeylines +\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% +\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% +\ifx\relax #3% +#1{#2}{}\else #1{#2}{#3#4}\fi}} + +% So much for the things common to all kinds of definitions. + +% Define @defun. + +% First, define the processing that is wanted for arguments of \defun +% Use this to expand the args and terminate the paragraph they make up + +\def\defunargs #1{\functionparens \sl +% Expand, preventing hyphenation at `-' chars. +% Note that groups don't affect changes in \hyphenchar. +\hyphenchar\tensl=0 +#1% +\hyphenchar\tensl=45 +\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi% +\interlinepenalty=10000 +\advance\rightskip by 0pt plus 1fil +\endgraf\penalty 10000\vskip -\parskip\penalty 10000% +} + +\def\deftypefunargs #1{% +% Expand, preventing hyphenation at `-' chars. +% Note that groups don't affect changes in \hyphenchar. +% Use \boldbraxnoamp, not \functionparens, so that & is not special. +\boldbraxnoamp +\tclose{#1}% avoid \code because of side effects on active chars +\interlinepenalty=10000 +\advance\rightskip by 0pt plus 1fil +\endgraf\penalty 10000\vskip -\parskip\penalty 10000% +} + +% Do complete processing of one @defun or @defunx line already parsed. + +% @deffn Command forward-char nchars + +\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} + +\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% +\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% @defun == @deffn Function + +\def\defun{\defparsebody\Edefun\defunx\defunheader} + +\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Function}% +\defunargs {#2}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% @deftypefun int foobar (int @var{foo}, float @var{bar}) + +\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} + +% #1 is the data type. #2 is the name and args. +\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} +% #1 is the data type, #2 the name, #3 the args. +\def\deftypefunheaderx #1#2 #3\relax{% +\doind {fn}{\code{#2}}% Make entry in function index +\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}% +\deftypefunargs {#3}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) + +\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} + +% \defheaderxcond#1\relax$$$ +% puts #1 in @code, followed by a space, but does nothing if #1 is null. +\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi} + +% #1 is the classification. #2 is the data type. #3 is the name and args. +\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} +% #1 is the classification, #2 the data type, #3 the name, #4 the args. +\def\deftypefnheaderx #1#2#3 #4\relax{% +\doind {fn}{\code{#3}}% Make entry in function index +\begingroup +\normalparens % notably, turn off `&' magic, which prevents +% at least some C++ text from working +\defname {\defheaderxcond#2\relax$$$#3}{#1}% +\deftypefunargs {#4}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% @defmac == @deffn Macro + +\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} + +\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Macro}% +\defunargs {#2}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% @defspec == @deffn Special Form + +\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} + +\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{Special Form}% +\defunargs {#2}\endgroup % +\catcode 61=\other % Turn off change made in \defparsebody +} + +% This definition is run if you use @defunx +% anywhere other than immediately after a @defun or @defunx. + +\def\deffnx #1 {\errmessage{@deffnx in invalid context}} +\def\defunx #1 {\errmessage{@defunx in invalid context}} +\def\defmacx #1 {\errmessage{@defmacx in invalid context}} +\def\defspecx #1 {\errmessage{@defspecx in invalid context}} +\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} +\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}} + +% @defmethod, and so on + +% @defop {Funny Method} foo-class frobnicate argument + +\def\defop #1 {\def\defoptype{#1}% +\defopparsebody\Edefop\defopx\defopheader\defoptype} + +\def\defopheader #1#2#3{% +\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index +\begingroup\defname {#2}{\defoptype{} on #1}% +\defunargs {#3}\endgroup % +} + +% @defmethod == @defop Method + +\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} + +\def\defmethodheader #1#2#3{% +\dosubind {fn}{\code{#2}}{on #1}% entry in function index +\begingroup\defname {#2}{Method on #1}% +\defunargs {#3}\endgroup % +} + +% @defcv {Class Option} foo-class foo-flag + +\def\defcv #1 {\def\defcvtype{#1}% +\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} + +\def\defcvarheader #1#2#3{% +\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index +\begingroup\defname {#2}{\defcvtype{} of #1}% +\defvarargs {#3}\endgroup % +} + +% @defivar == @defcv {Instance Variable} + +\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} + +\def\defivarheader #1#2#3{% +\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index +\begingroup\defname {#2}{Instance Variable of #1}% +\defvarargs {#3}\endgroup % +} + +% These definitions are run if you use @defmethodx, etc., +% anywhere other than immediately after a @defmethod, etc. + +\def\defopx #1 {\errmessage{@defopx in invalid context}} +\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} +\def\defcvx #1 {\errmessage{@defcvx in invalid context}} +\def\defivarx #1 {\errmessage{@defivarx in invalid context}} + +% Now @defvar + +% First, define the processing that is wanted for arguments of @defvar. +% This is actually simple: just print them in roman. +% This must expand the args and terminate the paragraph they make up +\def\defvarargs #1{\normalparens #1% +\interlinepenalty=10000 +\endgraf\penalty 10000\vskip -\parskip\penalty 10000} + +% @defvr Counter foo-count + +\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} + +\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% +\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} + +% @defvar == @defvr Variable + +\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} + +\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{Variable}% +\defvarargs {#2}\endgroup % +} + +% @defopt == @defvr {User Option} + +\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} + +\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{User Option}% +\defvarargs {#2}\endgroup % +} + +% @deftypevar int foobar + +\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} + +% #1 is the data type. #2 is the name. +\def\deftypevarheader #1#2{% +\doind {vr}{\code{#2}}% Make entry in variables index +\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}% +\interlinepenalty=10000 +\endgraf\penalty 10000\vskip -\parskip\penalty 10000 +\endgroup} + +% @deftypevr {Global Flag} int enable + +\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} + +\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}% +\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} +\interlinepenalty=10000 +\endgraf\penalty 10000\vskip -\parskip\penalty 10000 +\endgroup} + +% This definition is run if you use @defvarx +% anywhere other than immediately after a @defvar or @defvarx. + +\def\defvrx #1 {\errmessage{@defvrx in invalid context}} +\def\defvarx #1 {\errmessage{@defvarx in invalid context}} +\def\defoptx #1 {\errmessage{@defoptx in invalid context}} +\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}} +\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}} + +% Now define @deftp +% Args are printed in bold, a slight difference from @defvar. + +\def\deftpargs #1{\bf \defvarargs{#1}} + +% @deftp Class window height width ... + +\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} + +\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% +\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} + +% This definition is run if you use @deftpx, etc +% anywhere other than immediately after a @deftp, etc. + +\def\deftpx #1 {\errmessage{@deftpx in invalid context}} + +\message{cross reference,} +% Define cross-reference macros +\newwrite \auxfile + +\newif\ifhavexrefs % True if xref values are known. +\newif\ifwarnedxrefs % True if we warned once that they aren't known. + +% \setref{foo} defines a cross-reference point named foo. + +\def\setref#1{% +\dosetq{#1-title}{Ytitle}% +\dosetq{#1-pg}{Ypagenumber}% +\dosetq{#1-snt}{Ysectionnumberandtype}} + +\def\unnumbsetref#1{% +\dosetq{#1-title}{Ytitle}% +\dosetq{#1-pg}{Ypagenumber}% +\dosetq{#1-snt}{Ynothing}} + +\def\appendixsetref#1{% +\dosetq{#1-title}{Ytitle}% +\dosetq{#1-pg}{Ypagenumber}% +\dosetq{#1-snt}{Yappendixletterandtype}} + +% \xref, \pxref, and \ref generate cross-references to specified points. +% For \xrefX, #1 is the node name, #2 the name of the Info +% cross-reference, #3 the printed node name, #4 the name of the Info +% file, #5 the name of the printed manual. All but the node name can be +% omitted. +% +\def\href#1{\hrefX[#1,,,]} +\def\hrefX[#1,#2,#3,#4]{#1} +\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} +\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} +\def\ref#1{\xrefX[#1,,,,,,,]} +\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \def\printedmanual{\ignorespaces #5}% + \def\printednodename{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual}% + \setbox0=\hbox{\printednodename}% + \ifdim \wd0 = 0pt + % No printed node name was explicitly given. + \ifx\SETxref-automatic-section-title\thisisundefined + % Use the node name inside the square brackets. + \def\printednodename{\ignorespaces #1}% + \else + % Use the actual chapter/section title appear inside + % the square brackets. Use the real section title if we have it. + \ifdim \wd1>0pt% + % It is in another manual, so we don't have it. + \def\printednodename{\ignorespaces #1}% + \else + \ifhavexrefs + % We know the real title if we have the xref values. + \def\printednodename{\refx{#1-title}{}}% + \else + % Otherwise just copy the Info node name. + \def\printednodename{\ignorespaces #1}% + \fi% + \fi + \fi + \fi + % + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. + \ifdim \wd1 > 0pt + \putwordsection{} ``\printednodename'' in \cite{\printedmanual}% + \else + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive \refx{#1-snt}{}}% + \space [\printednodename],\space + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \fi +\endgroup} + +% \dosetq is the interface for calls from other macros + +% Use \turnoffactive so that punctuation chars such as underscore +% work in node names. +\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat% +\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% +\next}} + +% \internalsetq {foo}{page} expands into +% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} +% When the aux file is read, ' is the escape character + +\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} + +% Things to be expanded by \internalsetq + +\def\Ypagenumber{\folio} + +\def\Ytitle{\thissection} + +\def\Ynothing{} + +\def\Ysectionnumberandtype{% +\ifnum\secno=0 \putwordChapter\xreftie\the\chapno % +\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno % +\else \ifnum \subsubsecno=0 % +\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno % +\else % +\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % +\fi \fi \fi } + +\def\Yappendixletterandtype{% +\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}% +\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno % +\else \ifnum \subsubsecno=0 % +\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno % +\else % +\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % +\fi \fi \fi } + +\gdef\xreftie{'tie} + +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Non-3.0. +\else + \def\linenumber{\the\inputlineno:\space} +\fi + +% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. +% If its value is nonempty, SUFFIX is output afterward. + +\def\refx#1#2{% + \expandafter\ifx\csname X#1\endcsname\relax + % If not defined, say something at least. + $\langle$un\-de\-fined$\rangle$% + \ifhavexrefs + \message{\linenumber Undefined cross reference `#1'.}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi + \fi + \else + % It's defined, so just use it. + \csname X#1\endcsname + \fi + #2% Output the suffix in any case. +} + +% Read the last existing aux file, if any. No error if none exists. + +% This is the macro invoked by entries in the aux file. +\def\xrdef #1#2{ +{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}} + +\def\readauxfile{% +\begingroup +\catcode `\^^@=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\^^C=\other +\catcode `\^^D=\other +\catcode `\^^E=\other +\catcode `\^^F=\other +\catcode `\^^G=\other +\catcode `\^^H=\other +\catcode `\ =\other +\catcode `\^^L=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode 26=\other +\catcode `\^^[=\other +\catcode `\^^\=\other +\catcode `\^^]=\other +\catcode `\^^^=\other +\catcode `\^^_=\other +\catcode `\@=\other +\catcode `\^=\other +\catcode `\~=\other +\catcode `\[=\other +\catcode `\]=\other +\catcode`\"=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode `\$=\other +\catcode `\#=\other +\catcode `\&=\other +% `\+ does not work, so use 43. +\catcode 43=\other +% Make the characters 128-255 be printing characters +{% + \count 1=128 + \def\loop{% + \catcode\count 1=\other + \advance\count 1 by 1 + \ifnum \count 1<256 \loop \fi + }% +}% +% the aux file uses ' as the escape. +% Turn off \ as an escape so we do not lose on +% entries which were dumped with control sequences in their names. +% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ +% Reference to such entries still does not work the way one would wish, +% but at least they do not bomb out when the aux file is read in. +\catcode `\{=1 \catcode `\}=2 +\catcode `\%=\other +\catcode `\'=0 +\catcode`\^=7 % to make ^^e4 etc usable in xref tags +\catcode `\\=\other +\openin 1 \jobname.aux +\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue +\global\warnedobstrue +\fi +% Open the new aux file. Tex will close it automatically at exit. +\openout \auxfile=\jobname.aux +\endgroup} + + +% Footnotes. + +\newcount \footnoteno + +% The trailing space in the following definition for supereject is +% vital for proper filling; pages come out unaligned when you do a +% pagealignmacro call if that space before the closing brace is +% removed. +\def\supereject{\par\penalty -20000\footnoteno =0 } + +% @footnotestyle is meaningful for info output only.. +\let\footnotestyle=\comment + +\let\ptexfootnote=\footnote + +{\catcode `\@=11 +% +% Auto-number footnotes. Otherwise like plain. +\gdef\footnote{% + \global\advance\footnoteno by \@ne + \edef\thisfootno{$^{\the\footnoteno}$}% + % + % In case the footnote comes at the end of a sentence, preserve the + % extra spacing after we do the footnote number. + \let\@sf\empty + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi + % + % Remove inadvertent blank space before typesetting the footnote number. + \unskip + \thisfootno\@sf + \footnotezzz +}% + +% Don't bother with the trickery in plain.tex to not require the +% footnote text as a parameter. Our footnotes don't need to be so general. +% +\long\gdef\footnotezzz#1{\insert\footins{% + % We want to typeset this text as a normal paragraph, even if the + % footnote reference occurs in (for example) a display environment. + % So reset some parameters. + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip + \rightskip\z@skip + \spaceskip\z@skip + \xspaceskip\z@skip + \parindent\defaultparindent + % + % Hang the footnote text off the number. + \hang + \textindent{\thisfootno}% + % + % Don't crash into the line above the footnote text. Since this + % expands into a box, it must come within the paragraph, lest it + % provide a place where TeX can split the footnote. + \footstrut + #1\strut}% +} + +}%end \catcode `\@=11 + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +\def\setleading#1{% + \normalbaselineskip = #1\relax + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt} + + +% End of control word definitions. + +\message{and turning on texinfo input format.} + +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + +% Set some numeric style parameters, for 8.5 x 11 format. + +%\hsize = 6.5in +\newdimen\defaultparindent \defaultparindent = 15pt +\parindent = \defaultparindent +\parskip 18pt plus 1pt +\setleading{15pt} +\advance\topskip by 1.2cm + +% Prevent underfull vbox error messages. +\vbadness=10000 + +% Following George Bush, just get rid of widows and orphans. +\widowpenalty=10000 +\clubpenalty=10000 + +% Use TeX 3.0's \emergencystretch to help line breaking, but if we're +% using an old version of TeX, don't do anything. We want the amount of +% stretch added to depend on the line length, hence the dependence on +% \hsize. This makes it come to about 9pt for the 8.5x11 format. +% +\ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% +\else + \emergencystretch = \hsize + \divide\emergencystretch by 45 +\fi + +% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25) +\def\smallbook{ + +% These values for secheadingskip and subsecheadingskip are +% experiments. RJC 7 Aug 1992 +\global\secheadingskip = 17pt plus 6pt minus 3pt +\global\subsecheadingskip = 14pt plus 6pt minus 3pt + +\global\lispnarrowing = 0.3in +\setleading{12pt} +\advance\topskip by -1cm +\global\parskip 3pt plus 1pt +\global\hsize = 5in +\global\vsize=7.5in +\global\tolerance=700 +\global\hfuzz=1pt +\global\contentsrightmargin=0pt +\global\deftypemargin=0pt +\global\defbodyindent=.5cm + +\global\pagewidth=\hsize +\global\pageheight=\vsize + +\global\let\smalllisp=\smalllispx +\global\let\smallexample=\smalllispx +\global\def\Esmallexample{\Esmalllisp} +} + +% Use @afourpaper to print on European A4 paper. +\def\afourpaper{ +\global\tolerance=700 +\global\hfuzz=1pt +\setleading{12pt} +\global\parskip 15pt plus 1pt + +\global\vsize= 53\baselineskip +\advance\vsize by \topskip +%\global\hsize= 5.85in % A4 wide 10pt +\global\hsize= 6.5in +\global\outerhsize=\hsize +\global\advance\outerhsize by 0.5in +\global\outervsize=\vsize +\global\advance\outervsize by 0.6in + +\global\pagewidth=\hsize +\global\pageheight=\vsize +} + +% Allow control of the text dimensions. Parameters in order: textheight; +% textwidth; \voffset; \hoffset (!); binding offset. All require a dimension; +% header is additional; added length extends the bottom of the page. + +\def\changepagesizes#1#2#3#4#5{ + \global\vsize= #1 + \advance\vsize by \topskip + \global\voffset= #3 + \global\hsize= #2 + \global\outerhsize=\hsize + \global\advance\outerhsize by 0.5in + \global\outervsize=\vsize + \global\advance\outervsize by 0.6in + \global\pagewidth=\hsize + \global\pageheight=\vsize + \global\normaloffset= #4 + \global\bindingoffset= #5} + +% This layout is compatible with Latex on A4 paper. + +\def\afourlatex{\changepagesizes{22cm}{15cm}{7mm}{4.6mm}{5mm}} + +% Use @afourwide to print on European A4 paper in wide format. +\def\afourwide{\afourpaper +\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}} + +% Define macros to output various characters with catcode for normal text. +\catcode`\"=\other +\catcode`\~=\other +\catcode`\^=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode`\+=\other +\def\normaldoublequote{"} +\def\normaltilde{~} +\def\normalcaret{^} +\def\normalunderscore{_} +\def\normalverticalbar{|} +\def\normalless{<} +\def\normalgreater{>} +\def\normalplus{+} + +% This macro is used to make a character print one way in ttfont +% where it can probably just be output, and another way in other fonts, +% where something hairier probably needs to be done. +% +% #1 is what to print if we are indeed using \tt; #2 is what to print +% otherwise. Since all the Computer Modern typewriter fonts have zero +% interword stretch (and shrink), and it is reasonable to expect all +% typewriter fonts to have this, we can check that font parameter. +% +\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary). +% Most of these we simply print from the \tt font, but for some, we can +% use math or other variants that look better in normal text. + +\catcode`\"=\active +\def\activedoublequote{{\tt \char '042}} +\let"=\activedoublequote +\catcode`\~=\active +\def~{{\tt \char '176}} +\chardef\hat=`\^ +\catcode`\^=\active +\def\auxhat{\def^{'hat}} +\def^{{\tt \hat}} + +\catcode`\_=\active +\def_{\ifusingtt\normalunderscore\_} +% Subroutine for the previous macro. +\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}} + +\catcode`\|=\active +\def|{{\tt \char '174}} +\chardef \less=`\< +\catcode`\<=\active +\def<{{\tt \less}} +\chardef \gtr=`\> +\catcode`\>=\active +\def>{{\tt \gtr}} +\catcode`\+=\active +\def+{{\tt \char 43}} +%\catcode 27=\active +%\def^^[{$\diamondsuit$} + +% Set up an active definition for =, but don't enable it most of the time. +{\catcode`\==\active +\global\def={{\tt \char 61}}} + +\catcode`+=\active +\catcode`\_=\active + +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have \everyjob (or @setfilename) turn them on. +% \otherifyactive is called near the end of this file. +\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} + +\catcode`\@=0 + +% \rawbackslashxx output one backslash character in current font +\global\chardef\rawbackslashxx=`\\ +%{\catcode`\\=\other +%@gdef@rawbackslashxx{\}} + +% \rawbackslash redefines \ as input to do \rawbackslashxx. +{\catcode`\\=\active +@gdef@rawbackslash{@let\=@rawbackslashxx }} + +% \normalbackslash outputs one backslash in fixed width font. +\def\normalbackslash{{\tt\rawbackslashxx}} + +% Say @foo, not \foo, in error messages. +\escapechar=`\@ + +% \catcode 17=0 % Define control-q +\catcode`\\=\active + +% Used sometimes to turn off (effectively) the active characters +% even after parsing them. +@def@turnoffactive{@let"=@normaldoublequote +@let\=@realbackslash +@let~=@normaltilde +@let^=@normalcaret +@let_=@normalunderscore +@let|=@normalverticalbar +@let<=@normalless +@let>=@normalgreater +@let+=@normalplus} + +@def@normalturnoffactive{@let"=@normaldoublequote +@let\=@normalbackslash +@let~=@normaltilde +@let^=@normalcaret +@let_=@normalunderscore +@let|=@normalverticalbar +@let<=@normalless +@let>=@normalgreater +@let+=@normalplus} + +% Make _ and + \other characters, temporarily. +% This is canceled by @fixbackslash. +@otherifyactive + +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% +@gdef@eatinput input texinfo{@fixbackslash} +@global@let\ = @eatinput + +% On the other hand, perhaps the file did not have a `\input texinfo'. Then +% the first `\{ in the file would cause an error. This macro tries to fix +% that, assuming it is called before the first `\' could plausibly occur. +% Also back turn on active characters that might appear in the input +% file name, in case not using a pre-dumped format. +% +@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active @catcode`@_=@active} + +%% These look ok in all fonts, so just make them not special. The @rm below +%% makes sure that the current font starts out as the newly loaded cmr10 +@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other + +@textfonts +@rm + +@c Local variables: +@c page-delimiter: "^\\\\message" +@c End: |