summaryrefslogtreecommitdiffstats
path: root/doc/supplements/template/cputable.t
diff options
context:
space:
mode:
Diffstat (limited to 'doc/supplements/template/cputable.t')
-rw-r--r--doc/supplements/template/cputable.t111
1 files changed, 111 insertions, 0 deletions
diff --git a/doc/supplements/template/cputable.t b/doc/supplements/template/cputable.t
new file mode 100644
index 0000000000..a2164335aa
--- /dev/null
+++ b/doc/supplements/template/cputable.t
@@ -0,0 +1,111 @@
+@c
+@c COPYRIGHT (c) 1988-1998.
+@c On-Line Applications Research Corporation (OAR).
+@c All rights reserved.
+@c
+@c $Id$
+@c
+
+@chapter Processor Dependent Information Table
+
+@section Introduction
+
+Any highly processor dependent information required
+to describe a processor to RTEMS is provided in the CPU
+Dependent Information Table. This table is not required for all
+processors supported by RTEMS. This chapter describes the
+contents, if any, for a particular processor type.
+
+@section CPU Dependent Information Table
+
+The XXX version of the RTEMS CPU Dependent
+Information Table contains the information required to interface
+a Board Support Package and RTEMS on the XXX. This
+information is provided to allow RTEMS to interoperate
+effectively with the BSP. The C structure definition is given
+here:
+
+@example
+@group
+typedef struct @{
+ void (*pretasking_hook)( void );
+ void (*predriver_hook)( void );
+ void (*postdriver_hook)( void );
+ void (*idle_task)( void );
+ boolean do_zero_of_workspace;
+ unsigned32 idle_task_stack_size;
+ unsigned32 interrupt_stack_size;
+ unsigned32 extra_mpci_receive_server_stack;
+ void * (*stack_allocate_hook)( unsigned32 );
+ void (*stack_free_hook)( void* );
+ /* end of fields required on all CPUs */
+
+ /* XXX CPU family dependent stuff */
+@} rtems_cpu_table;
+@end group
+@end example
+
+@table @code
+@item pretasking_hook
+is the address of the
+user provided routine which is invoked once RTEMS initialization
+is complete but before interrupts and tasking are enabled. This
+field may be NULL to indicate that the hook is not utilized.
+
+@item predriver_hook
+is the address of the user provided
+routine which is invoked with tasking enabled immediately before
+the MPCI and device drivers are initialized. RTEMS
+initialization is complete, interrupts and tasking are enabled,
+but no device drivers are initialized. This field may be NULL to
+indicate that the hook is not utilized.
+
+@item postdriver_hook
+is the address of the user provided
+routine which is invoked with tasking enabled immediately after
+the MPCI and device drivers are initialized. RTEMS
+initialization is complete, interrupts and tasking are enabled,
+and the device drivers are initialized. This field may be NULL
+to indicate that the hook is not utilized.
+
+@item idle_task
+is the address of the optional user
+provided routine which is used as the system's IDLE task. If
+this field is not NULL, then the RTEMS default IDLE task is not
+used. This field may be NULL to indicate that the default IDLE
+is to be used.
+
+@item do_zero_of_workspace
+indicates whether RTEMS should
+zero the Workspace as part of its initialization. If set to
+TRUE, the Workspace is zeroed. Otherwise, it is not.
+
+@item idle_task_stack_size
+is the size of the RTEMS idle task stack in bytes.
+If this number is less than MINIMUM_STACK_SIZE, then the
+idle task's stack will be MINIMUM_STACK_SIZE in byte.
+
+@item interrupt_stack_size
+is the size of the RTEMS
+allocated interrupt stack in bytes. This value must be at least
+as large as MINIMUM_STACK_SIZE.
+
+@item extra_mpci_receive_server_stack
+is the extra stack space allocated for the RTEMS MPCI receive server task
+in bytes. The MPCI receive server may invoke nearly all directives and
+may require extra stack space on some targets.
+
+@item stack_allocate_hook
+is the address of the optional user provided routine which allocates
+memory for task stacks. If this hook is not NULL, then a stack_free_hook
+must be provided as well.
+
+@item stack_free_hook
+is the address of the optional user provided routine which frees
+memory for task stacks. If this hook is not NULL, then a stack_allocate_hook
+must be provided as well.
+
+@item XXX
+is where the CPU family dependent stuff goes.
+
+@end table