diff options
Diffstat (limited to 'doc/supplements/i386')
-rw-r--r-- | doc/supplements/i386/FORCE386_TIMES | 244 | ||||
-rw-r--r-- | doc/supplements/i386/Makefile | 88 | ||||
-rw-r--r-- | doc/supplements/i386/bsp.t | 110 | ||||
-rw-r--r-- | doc/supplements/i386/bsp.texi | 110 | ||||
-rw-r--r-- | doc/supplements/i386/callconv.t | 119 | ||||
-rw-r--r-- | doc/supplements/i386/callconv.texi | 119 | ||||
-rw-r--r-- | doc/supplements/i386/cpumodel.t | 81 | ||||
-rw-r--r-- | doc/supplements/i386/cpumodel.texi | 81 | ||||
-rw-r--r-- | doc/supplements/i386/cputable.t | 126 | ||||
-rw-r--r-- | doc/supplements/i386/cputable.texi | 126 | ||||
-rw-r--r-- | doc/supplements/i386/fatalerr.t | 44 | ||||
-rw-r--r-- | doc/supplements/i386/fatalerr.texi | 44 | ||||
-rw-r--r-- | doc/supplements/i386/i386.texi | 123 | ||||
-rw-r--r-- | doc/supplements/i386/intr.t | 191 | ||||
-rw-r--r-- | doc/supplements/i386/intr_NOTIMES.t | 191 | ||||
-rw-r--r-- | doc/supplements/i386/memmodel.t | 85 | ||||
-rw-r--r-- | doc/supplements/i386/memmodel.texi | 85 | ||||
-rw-r--r-- | doc/supplements/i386/preface.texi | 39 | ||||
-rw-r--r-- | doc/supplements/i386/timeFORCE386.t | 135 | ||||
-rw-r--r-- | doc/supplements/i386/timedata.t | 135 |
20 files changed, 2276 insertions, 0 deletions
diff --git a/doc/supplements/i386/FORCE386_TIMES b/doc/supplements/i386/FORCE386_TIMES new file mode 100644 index 0000000000..19959db3aa --- /dev/null +++ b/doc/supplements/i386/FORCE386_TIMES @@ -0,0 +1,244 @@ +# +# Intel i386/Force CPU-386 Timing and Size Information +# + +# +# CPU Model Information +# +RTEMS_CPU_MODEL i386 +# +# Interrupt Latency +# +# NOTE: In general, the text says it is hand-calculated to be +# RTEMS_MAXIMUM_DISABLE_PERIOD at RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ +# Mhz and this was last calculated for Release +# RTEMS_VERSION_FOR_MAXIMUM_DISABLE_PERIOD. +# +RTEMS_MAXIMUM_DISABLE_PERIOD 13.0 +RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ 16 +RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD 3.1.0 +# +# Context Switch Times +# +RTEMS_NO_FP_CONTEXTS 34 +RTEMS_RESTORE_1ST_FP_TASK 57 +RTEMS_SAVE_INIT_RESTORE_INIT 59 +RTEMS_SAVE_IDLE_RESTORE_INIT 59 +RTEMS_SAVE_IDLE_RESTORE_IDLE 83 +# +# Task Manager Times +# +RTEMS_TASK_CREATE_ONLY 157 +RTEMS_TASK_IDENT_ONLY 748 +RTEMS_TASK_START_ONLY 86 +RTEMS_TASK_RESTART_CALLING_TASK 118 +RTEMS_TASK_RESTART_SUSPENDED_RETURNS_TO_CALLER 45 +RTEMS_TASK_RESTART_BLOCKED_RETURNS_TO_CALLER 138 +RTEMS_TASK_RESTART_READY_RETURNS_TO_CALLER 105 +RTEMS_TASK_RESTART_SUSPENDED_PREEMPTS_CALLER 149 +RTEMS_TASK_RESTART_BLOCKED_PREEMPTS_CALLER 162 +RTEMS_TASK_RESTART_READY_PREEMPTS_CALLER 156 +RTEMS_TASK_DELETE_CALLING_TASK 187 +RTEMS_TASK_DELETE_SUSPENDED_TASK 147 +RTEMS_TASK_DELETE_BLOCKED_TASK 153 +RTEMS_TASK_DELETE_READY_TASK 157 +RTEMS_TASK_SUSPEND_CALLING_TASK 81 +RTEMS_TASK_SUSPEND_RETURNS_TO_CALLER 45 +RTEMS_TASK_RESUME_TASK_READIED_RETURNS_TO_CALLER 46 +RTEMS_TASK_RESUME_TASK_READIED_PREEMPTS_CALLER 71 +RTEMS_TASK_SET_PRIORITY_OBTAIN_CURRENT_PRIORITY 30 +RTEMS_TASK_SET_PRIORITY_RETURNS_TO_CALLER 67 +RTEMS_TASK_SET_PRIORITY_PREEMPTS_CALLER 115 +RTEMS_TASK_MODE_OBTAIN_CURRENT_MODE 19 +RTEMS_TASK_MODE_NO_RESCHEDULE 21 +RTEMS_TASK_MODE_RESCHEDULE_RETURNS_TO_CALLER 27 +RTEMS_TASK_MODE_RESCHEDULE_PREEMPTS_CALLER 66 +RTEMS_TASK_GET_NOTE_ONLY 32 +RTEMS_TASK_SET_NOTE_ONLY 32 +RTEMS_TASK_WAKE_AFTER_YIELD_RETURNS_TO_CALLER 18 +RTEMS_TASK_WAKE_AFTER_YIELD_PREEMPTS_CALLER 63 +RTEMS_TASK_WAKE_WHEN_ONLY 128 +# +# Interrupt Manager +# +RTEMS_INTR_ENTRY_RETURNS_TO_NESTED 12 +RTEMS_INTR_ENTRY_RETURNS_TO_INTERRUPTED_TASK 13 +RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK 12 +RTEMS_INTR_EXIT_RETURNS_TO_NESTED 10 +RTEMS_INTR_EXIT_RETURNS_TO_INTERRUPTED_TASK 13 +RTEMS_INTR_EXIT_RETURNS_TO_PREEMPTING_TASK 58 +# +# Clock Manager +# +RTEMS_CLOCK_SET_ONLY 85 +RTEMS_CLOCK_GET_ONLY 2 +RTEMS_CLOCK_TICK_ONLY 16 +# +# Timer Manager +# +RTEMS_TIMER_CREATE_ONLY 34 +RTEMS_TIMER_IDENT_ONLY 729 +RTEMS_TIMER_DELETE_INACTIVE 48 +RTEMS_TIMER_DELETE_ACTIVE 52 +RTEMS_TIMER_FIRE_AFTER_INACTIVE 65 +RTEMS_TIMER_FIRE_AFTER_ACTIVE 69 +RTEMS_TIMER_FIRE_WHEN_INACTIVE 92 +RTEMS_TIMER_FIRE_WHEN_ACTIVE 92 +RTEMS_TIMER_RESET_INACTIVE 58 +RTEMS_TIMER_RESET_ACTIVE 63 +RTEMS_TIMER_CANCEL_INACTIVE 32 +RTEMS_TIMER_CANCEL_ACTIVE 37 +# +# Semaphore Manager +# +RTEMS_SEMAPHORE_CREATE_ONLY 64 +RTEMS_SEMAPHORE_IDENT_ONLY 787 +RTEMS_SEMAPHORE_DELETE_ONLY 60 +RTEMS_SEMAPHORE_OBTAIN_AVAILABLE 41 +RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_NO_WAIT 40 +RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_CALLER_BLOCKS 123 +RTEMS_SEMAPHORE_RELEASE_NO_WAITING_TASKS 47 +RTEMS_SEMAPHORE_RELEASE_TASK_READIED_RETURNS_TO_CALLER 70 +RTEMS_SEMAPHORE_RELEASE_TASK_READIED_PREEMPTS_CALLER 95 +# +# Message Manager +# +RTEMS_MESSAGE_QUEUE_CREATE_ONLY 294 +RTEMS_MESSAGE_QUEUE_IDENT_ONLY 730 +RTEMS_MESSAGE_QUEUE_DELETE_ONLY 81 +RTEMS_MESSAGE_QUEUE_SEND_NO_WAITING_TASKS 117 +RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_RETURNS_TO_CALLER 118 +RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_PREEMPTS_CALLER 144 +RTEMS_MESSAGE_QUEUE_URGENT_NO_WAITING_TASKS 117 +RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_RETURNS_TO_CALLER 116 +RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_PREEMPTS_CALLER 144 +RTEMS_MESSAGE_QUEUE_BROADCAST_NO_WAITING_TASKS 53 +RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_RETURNS_TO_CALLER 122 +RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_PREEMPTS_CALLER 146 +RTEMS_MESSAGE_QUEUE_RECEIVE_AVAILABLE 93 +RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_NO_WAIT 45 +RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS 127 +RTEMS_MESSAGE_QUEUE_FLUSH_NO_MESSAGES_FLUSHED 29 +RTEMS_MESSAGE_QUEUE_FLUSH_MESSAGES_FLUSHED 41 +# +# Event Manager +# +RTEMS_EVENT_SEND_NO_TASK_READIED 26 +RTEMS_EVENT_SEND_TASK_READIED_RETURNS_TO_CALLER 60 +RTEMS_EVENT_SEND_TASK_READIED_PREEMPTS_CALLER 89 +RTEMS_EVENT_RECEIVE_OBTAIN_CURRENT_EVENTS <1 +RTEMS_EVENT_RECEIVE_AVAILABLE 27 +RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_NO_WAIT 25 +RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS 94 +# +# Signal Manager +# +RTEMS_SIGNAL_CATCH_ONLY 13 +RTEMS_SIGNAL_SEND_RETURNS_TO_CALLER 34 +RTEMS_SIGNAL_SEND_SIGNAL_TO_SELF 59 +RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_CALLING_TASK 39 +RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_PREEMPTING_TASK 60 +# +# Partition Manager +# +RTEMS_PARTITION_CREATE_ONLY 83 +RTEMS_PARTITION_IDENT_ONLY 730 +RTEMS_PARTITION_DELETE_ONLY 40 +RTEMS_PARTITION_GET_BUFFER_AVAILABLE 34 +RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE 33 +RTEMS_PARTITION_RETURN_BUFFER_ONLY 40 +# +# Region Manager +# +RTEMS_REGION_CREATE_ONLY 68 +RTEMS_REGION_IDENT_ONLY 739 +RTEMS_REGION_DELETE_ONLY 39 +RTEMS_REGION_GET_SEGMENT_AVAILABLE 49 +RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_NO_WAIT 45 +RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_CALLER_BLOCKS 127 +RTEMS_REGION_RETURN_SEGMENT_NO_WAITING_TASKS 52 +RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_RETURNS_TO_CALLER 113 +RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_PREEMPTS_CALLER 138 +# +# Dual-Ported Memory Manager +# +RTEMS_PORT_CREATE_ONLY 39 +RTEMS_PORT_IDENT_ONLY 728 +RTEMS_PORT_DELETE_ONLY 39 +RTEMS_PORT_INTERNAL_TO_EXTERNAL_ONLY 26 +RTEMS_PORT_EXTERNAL_TO_INTERNAL_ONLY 26 +# +# IO Manager +# +RTEMS_IO_INITIALIZE_ONLY 4 +RTEMS_IO_OPEN_ONLY 1 +RTEMS_IO_CLOSE_ONLY 1 +RTEMS_IO_READ_ONLY <1 +RTEMS_IO_WRITE_ONLY 1 +RTEMS_IO_CONTROL_ONLY 1 +# +# Rate Monotonic Manager +# +RTEMS_RATE_MONOTONIC_CREATE_ONLY 36 +RTEMS_RATE_MONOTONIC_IDENT_ONLY 725 +RTEMS_RATE_MONOTONIC_CANCEL_ONLY 39 +RTEMS_RATE_MONOTONIC_DELETE_ACTIVE 53 +RTEMS_RATE_MONOTONIC_DELETE_INACTIVE 49 +RTEMS_RATE_MONOTONIC_PERIOD_INITIATE_PERIOD_RETURNS_TO_CALLER 53 +RTEMS_RATE_MONOTONIC_PERIOD_CONCLUDE_PERIOD_CALLER_BLOCKS 82 +RTEMS_RATE_MONOTONIC_PERIOD_OBTAIN_STATUS 30 +# +# Size Information +# +# +# xxx alloted for numbers +# +RTEMS_DATA_SPACE 833 +RTEMS_MINIMUM_CONFIGURATION 22,660 +RTEMS_MAXIMUM_CONFIGURATION 39,592 +# x,xxx alloted for numbers +RTEMS_CORE_CODE_SIZE 16,948 +RTEMS_INITIALIZATION_CODE_SIZE 916 +RTEMS_TASK_CODE_SIZE 3,436 +RTEMS_INTERRUPT_CODE_SIZE 52 +RTEMS_CLOCK_CODE_SIZE 296 +RTEMS_TIMER_CODE_SIZE 1,084 +RTEMS_SEMAPHORE_CODE_SIZE 1,500 +RTEMS_MESSAGE_CODE_SIZE 1,596 +RTEMS_EVENT_CODE_SIZE 1,036 +RTEMS_SIGNAL_CODE_SIZE 396 +RTEMS_PARTITION_CODE_SIZE 1,052 +RTEMS_REGION_CODE_SIZE 1,392 +RTEMS_DPMEM_CODE_SIZE 664 +RTEMS_IO_CODE_SIZE 676 +RTEMS_FATAL_ERROR_CODE_SIZE 20 +RTEMS_RATE_MONOTONIC_CODE_SIZE 1,132 +RTEMS_MULTIPROCESSING_CODE_SIZE 6,840 +# xxx alloted for numbers +RTEMS_TIMER_CODE_OPTSIZE 144 +RTEMS_SEMAPHORE_CODE_OPTSIZE 136 +RTEMS_MESSAGE_CODE_OPTSIZE 224 +RTEMS_EVENT_CODE_OPTSIZE 44 +RTEMS_SIGNAL_CODE_OPTSIZE 44 +RTEMS_PARTITION_CODE_OPTSIZE 104 +RTEMS_REGION_CODE_OPTSIZE 124 +RTEMS_DPMEM_CODE_OPTSIZE 104 +RTEMS_IO_CODE_OPTSIZE 0 +RTEMS_RATE_MONOTONIC_CODE_OPTSIZE 136 +RTEMS_MULTIPROCESSING_CODE_OPTSIZE 228 +# xxx alloted for numbers +RTEMS_BYTES_PER_TASK 372 +RTEMS_BYTES_PER_TIMER 68 +RTEMS_BYTES_PER_SEMAPHORE 124 +RTEMS_BYTES_PER_MESSAGE_QUEUE 148 +RTEMS_BYTES_PER_REGION 144 +RTEMS_BYTES_PER_PARTITION 56 +RTEMS_BYTES_PER_PORT 36 +RTEMS_BYTES_PER_PERIOD 36 +RTEMS_BYTES_PER_EXTENSION 64 +RTEMS_BYTES_PER_FP_TASK 108 +RTEMS_BYTES_PER_NODE 48 +RTEMS_BYTES_PER_GLOBAL_OBJECT 20 +RTEMS_BYTES_PER_PROXY 124 +# x,xxx alloted for numbers +RTEMS_BYTES_OF_FIXED_SYSTEM_REQUIREMENTS 6,768 diff --git a/doc/supplements/i386/Makefile b/doc/supplements/i386/Makefile new file mode 100644 index 0000000000..e24c227cd5 --- /dev/null +++ b/doc/supplements/i386/Makefile @@ -0,0 +1,88 @@ +# +# COPYRIGHT (c) 1996. +# On-Line Applications Research Corporation (OAR). +# All rights reserved. +# + +include ../Make.config + +PROJECT=i386 +REPLACE=../tools/word-replace + +all: + +COMMON_FILES=../common/cpright.texi ../common/setup.texi \ + ../common/timing.texi + +FILES= $(PROJECT).texi \ + bsp.texi callconv.texi cpumodel.texi cputable.texi fatalerr.texi \ + intr.texi memmodel.texi preface.texi timetbl.texi timedata.texi wksheets.texi + +all: + +info: c_i386 + cp c_$(PROJECT) c_$(PROJECT)-* $(INFO_INSTALL) + +c_i386: $(FILES) + $(MAKEINFO) $(PROJECT).texi + +vinfo: info + $(INFO) -f c_i386 + +dvi: $(PROJECT).dvi +ps: $(PROJECT).ps + +$(PROJECT).ps: $(PROJECT).dvi + dvips -o $(PROJECT).ps $(PROJECT).dvi + cp $(PROJECT).ps $(PS_INSTALL) + +dv: dvi + $(XDVI) $(PROJECT).dvi + +view: ps + $(GHOSTVIEW) $(PROJECT).ps + +$(PROJECT).dvi: $(FILES) + $(TEXI2DVI) $(PROJECT).texi + +replace: timedata.texi + +intr.texi: intr.t FORCE386_TIMES + ${REPLACE} -p FORCE386_TIMES intr.t + mv intr.t.fixed intr.texi + +timetbl.t: ../common/timetbl.t + sed -e 's/TIMETABLE_NEXT_LINK/Command and Variable Index/' \ + <../common/timetbl.t >timetbl.t + +timetbl.texi: timetbl.t FORCE386_TIMES + ${REPLACE} -p FORCE386_TIMES timetbl.t + mv timetbl.t.fixed timetbl.texi + +timedata.texi: timedata.t FORCE386_TIMES + ${REPLACE} -p FORCE386_TIMES timedata.t + mv timedata.t.fixed timedata.texi + +wksheets.t: ../common/wksheets.t + sed -e 's/WORKSHEETS_PREVIOUS_LINK/Processor Dependent Information Table CPU Dependent Information Table/' \ + -e 's/WORKSHEETS_NEXT_LINK/i386 Timing Data/' \ + <../common/wksheets.t >wksheets.t + +wksheets.texi: wksheets.t FORCE386_TIMES + ${REPLACE} -p FORCE386_TIMES wksheets.t + mv wksheets.t.fixed wksheets.texi + +html: $(FILES) + -mkdir $(WWW_INSTALL)/c_i386 + $(TEXI2WWW) $(TEXI2WWW_ARGS) -dir $(WWW_INSTALL)/c_$(PROJECT) \ + $(PROJECT).texi + +clean: + rm -f *.o $(PROG) *.txt core + rm -f *.dvi *.ps *.log *.aux *.cp *.fn *.ky *.pg *.toc *.tp *.vr $(BASE) + rm -f $(PROJECT) $(PROJECT)-* + rm -f c_i386 c_i386-* + rm -f timedata.texi timetbl.texi intr.texi wksheets.texi + rm -f timetbl.t wksheets.t + rm -f *.fixed _* + diff --git a/doc/supplements/i386/bsp.t b/doc/supplements/i386/bsp.t new file mode 100644 index 0000000000..110d155154 --- /dev/null +++ b/doc/supplements/i386/bsp.t @@ -0,0 +1,110 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Board Support Packages, Board Support Packages Introduction, Default Fatal Error Processing Default Fatal Error Handler Operations, Top +@end ifinfo +@chapter Board Support Packages +@ifinfo +@menu +* Board Support Packages Introduction:: +* Board Support Packages System Reset:: +* Board Support Packages Processor Initialization:: +@end menu +@end ifinfo + +@ifinfo +@node Board Support Packages Introduction, Board Support Packages System Reset, Board Support Packages, Board Support Packages +@end ifinfo +@section Introduction + +An RTEMS Board Support Package (BSP) must be designed +to support a particular processor and target board combination. +This chapter presents a discussion of i386 specific BSP issues. +For more information on developing a BSP, refer to the chapter +titled Board Support Packages in the RTEMS C Applications User's +Guide. + +@ifinfo +@node Board Support Packages System Reset, Board Support Packages Processor Initialization, Board Support Packages Introduction, Board Support Packages +@end ifinfo +@section System Reset + +An RTEMS based application is initiated when the i386 +processor is reset. When the i386 is reset, + +@itemize @bullet +@item The EAX register is set to indicate the results of the +processor's power-up self test. If the self-test was not +executed, the contents of this register are undefined. +Otherwise, a non-zero value indicates the processor is faulty +and a zero value indicates a successful self-test. + +@item The DX register holds a component identifier and +revision level. DH contains 3 to indicate an i386 component and +DL contains a unique revision level indicator. + +@item Control register zero (CR0) is set such that the +processor is in real mode with paging disabled. Other portions +of CR0 are used to indicate the presence of a numeric +coprocessor. + +@item All bits in the extended flags register (EFLAG) which +are not permanently set are cleared. This inhibits all maskable +interrupts. + +@item The Interrupt Descriptor Register (IDTR) is set to point +at address zero. + +@item All segment registers are set to zero. + +@item The instruction pointer is set to 0x0000FFF0. The +first instruction executed after a reset is actually at +0xFFFFFFF0 because the i386 asserts the upper twelve address +until the first intersegment (FAR) JMP or CALL instruction. +When a JMP or CALL is executed, the upper twelve address lines +are lowered and the processor begins executing in the first +megabyte of memory. +@end itemize + +Typically, an intersegment JMP to the application's +initialization code is placed at address 0xFFFFFFF0. + +@ifinfo +@node Board Support Packages Processor Initialization, Processor Dependent Information Table, Board Support Packages System Reset, Board Support Packages +@end ifinfo +@section Processor Initialization + +This initialization code is responsible for +initializing all data structures required by the i386 in +protected mode and for actually entering protected mode. The +i386 must be placed in protected mode and the segment registers +and associated selectors must be initialized before the +initialize_executive directive is invoked. + +The initialization code is responsible for +initializing the Global Descriptor Table such that the i386 is +in the thirty-two bit flat memory model with paging disabled. +In this mode, the i386 automatically converts every address from +a logical to a physical address each time it is used. For more +information on the memory model used by RTEMS, please refer to +the Memory Model chapter in this document. + +If the application requires that the IDTR be some +value besides zero, then it should set it to the required value +at this point. All tasks share the same i386 IDTR value. +Because interrupts are enabled automatically by RTEMS as part of +the initialize_executive directive, the IDTR MUST be set +properly before this directive is invoked to insure correct +interrupt vectoring. If processor caching is to be utilized, +then it should be enabled during the reset application +initialization code. The reset code which is executed before +the call to initialize_executive has the following requirements: + +For more information regarding the i386s data +structures and their contents, refer to Intel's 386 +Programmer's Reference Manual. + diff --git a/doc/supplements/i386/bsp.texi b/doc/supplements/i386/bsp.texi new file mode 100644 index 0000000000..110d155154 --- /dev/null +++ b/doc/supplements/i386/bsp.texi @@ -0,0 +1,110 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Board Support Packages, Board Support Packages Introduction, Default Fatal Error Processing Default Fatal Error Handler Operations, Top +@end ifinfo +@chapter Board Support Packages +@ifinfo +@menu +* Board Support Packages Introduction:: +* Board Support Packages System Reset:: +* Board Support Packages Processor Initialization:: +@end menu +@end ifinfo + +@ifinfo +@node Board Support Packages Introduction, Board Support Packages System Reset, Board Support Packages, Board Support Packages +@end ifinfo +@section Introduction + +An RTEMS Board Support Package (BSP) must be designed +to support a particular processor and target board combination. +This chapter presents a discussion of i386 specific BSP issues. +For more information on developing a BSP, refer to the chapter +titled Board Support Packages in the RTEMS C Applications User's +Guide. + +@ifinfo +@node Board Support Packages System Reset, Board Support Packages Processor Initialization, Board Support Packages Introduction, Board Support Packages +@end ifinfo +@section System Reset + +An RTEMS based application is initiated when the i386 +processor is reset. When the i386 is reset, + +@itemize @bullet +@item The EAX register is set to indicate the results of the +processor's power-up self test. If the self-test was not +executed, the contents of this register are undefined. +Otherwise, a non-zero value indicates the processor is faulty +and a zero value indicates a successful self-test. + +@item The DX register holds a component identifier and +revision level. DH contains 3 to indicate an i386 component and +DL contains a unique revision level indicator. + +@item Control register zero (CR0) is set such that the +processor is in real mode with paging disabled. Other portions +of CR0 are used to indicate the presence of a numeric +coprocessor. + +@item All bits in the extended flags register (EFLAG) which +are not permanently set are cleared. This inhibits all maskable +interrupts. + +@item The Interrupt Descriptor Register (IDTR) is set to point +at address zero. + +@item All segment registers are set to zero. + +@item The instruction pointer is set to 0x0000FFF0. The +first instruction executed after a reset is actually at +0xFFFFFFF0 because the i386 asserts the upper twelve address +until the first intersegment (FAR) JMP or CALL instruction. +When a JMP or CALL is executed, the upper twelve address lines +are lowered and the processor begins executing in the first +megabyte of memory. +@end itemize + +Typically, an intersegment JMP to the application's +initialization code is placed at address 0xFFFFFFF0. + +@ifinfo +@node Board Support Packages Processor Initialization, Processor Dependent Information Table, Board Support Packages System Reset, Board Support Packages +@end ifinfo +@section Processor Initialization + +This initialization code is responsible for +initializing all data structures required by the i386 in +protected mode and for actually entering protected mode. The +i386 must be placed in protected mode and the segment registers +and associated selectors must be initialized before the +initialize_executive directive is invoked. + +The initialization code is responsible for +initializing the Global Descriptor Table such that the i386 is +in the thirty-two bit flat memory model with paging disabled. +In this mode, the i386 automatically converts every address from +a logical to a physical address each time it is used. For more +information on the memory model used by RTEMS, please refer to +the Memory Model chapter in this document. + +If the application requires that the IDTR be some +value besides zero, then it should set it to the required value +at this point. All tasks share the same i386 IDTR value. +Because interrupts are enabled automatically by RTEMS as part of +the initialize_executive directive, the IDTR MUST be set +properly before this directive is invoked to insure correct +interrupt vectoring. If processor caching is to be utilized, +then it should be enabled during the reset application +initialization code. The reset code which is executed before +the call to initialize_executive has the following requirements: + +For more information regarding the i386s data +structures and their contents, refer to Intel's 386 +Programmer's Reference Manual. + diff --git a/doc/supplements/i386/callconv.t b/doc/supplements/i386/callconv.t new file mode 100644 index 0000000000..6d58ba2f7b --- /dev/null +++ b/doc/supplements/i386/callconv.t @@ -0,0 +1,119 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Calling Conventions, Calling Conventions Introduction, CPU Model Dependent Features Floating Point Unit, Top +@end ifinfo +@chapter Calling Conventions +@ifinfo +@menu +* Calling Conventions Introduction:: +* Calling Conventions Processor Background:: +* Calling Conventions Calling Mechanism:: +* Calling Conventions Register Usage:: +* Calling Conventions Parameter Passing:: +* Calling Conventions User-Provided Routines:: +@end menu +@end ifinfo + +@ifinfo +@node Calling Conventions Introduction, Calling Conventions Processor Background, Calling Conventions, Calling Conventions +@end ifinfo +@section Introduction + +Each high-level language compiler generates +subroutine entry and exit code based upon a set of rules known +as the compiler's calling convention. These rules address the +following issues: + +@itemize @bullet +@item register preservation and usage + +@item parameter passing + +@item call and return mechanism +@end itemize + +A compiler's calling convention is of importance when +interfacing to subroutines written in another language either +assembly or high-level. Even when the high-level language and +target processor are the same, different compilers may use +different calling conventions. As a result, calling conventions +are both processor and compiler dependent. + +@ifinfo +@node Calling Conventions Processor Background, Calling Conventions Calling Mechanism, Calling Conventions Introduction, Calling Conventions +@end ifinfo +@section Processor Background + +The i386 architecture supports a simple yet effective +call and return mechanism. A subroutine is invoked via the call +(call) instruction. This instruction pushes the return address +on the stack. The return from subroutine (ret) instruction pops +the return address off the current stack and transfers control +to that instruction. It is is important to note that the i386 +call and return mechanism does not automatically save or restore +any registers. It is the responsibility of the high-level +language compiler to define the register preservation and usage +convention. + +@ifinfo +@node Calling Conventions Calling Mechanism, Calling Conventions Register Usage, Calling Conventions Processor Background, Calling Conventions +@end ifinfo +@section Calling Mechanism + +All RTEMS directives are invoked using a call +instruction and return to the user application via the ret +instruction. + +@ifinfo +@node Calling Conventions Register Usage, Calling Conventions Parameter Passing, Calling Conventions Calling Mechanism, Calling Conventions +@end ifinfo +@section Register Usage + +As discussed above, the call instruction does not +automatically save any registers. RTEMS uses the registers EAX, +ECX, and EDX as scratch registers. These registers are not +preserved by RTEMS directives therefore, the contents of these +registers should not be assumed upon return from any RTEMS +directive. + +@ifinfo +@node Calling Conventions Parameter Passing, Calling Conventions User-Provided Routines, Calling Conventions Register Usage, Calling Conventions +@end ifinfo +@section Parameter Passing + +RTEMS assumes that arguments are placed on the +current stack before the directive is invoked via the call +instruction. The first argument is assumed to be closest to the +return address on the stack. This means that the first argument +of the C calling sequence is pushed last. The following +pseudo-code illustrates the typical sequence used to call a +RTEMS directive with three (3) arguments: + +@example +push third argument +push second argument +push first argument +invoke directive +remove arguments from the stack +@end example + +The arguments to RTEMS are typically pushed onto the +stack using a push instruction. These arguments must be removed +from the stack after control is returned to the caller. This +removal is typically accomplished by adding the size of the +argument list in bytes to the stack pointer. + +@ifinfo +@node Calling Conventions User-Provided Routines, Memory Model, Calling Conventions Parameter Passing, Calling Conventions +@end ifinfo +@section User-Provided Routines + +All user-provided routines invoked by RTEMS, such as +user extensions, device drivers, and MPCI routines, must also +adhere to these calling conventions. + diff --git a/doc/supplements/i386/callconv.texi b/doc/supplements/i386/callconv.texi new file mode 100644 index 0000000000..6d58ba2f7b --- /dev/null +++ b/doc/supplements/i386/callconv.texi @@ -0,0 +1,119 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Calling Conventions, Calling Conventions Introduction, CPU Model Dependent Features Floating Point Unit, Top +@end ifinfo +@chapter Calling Conventions +@ifinfo +@menu +* Calling Conventions Introduction:: +* Calling Conventions Processor Background:: +* Calling Conventions Calling Mechanism:: +* Calling Conventions Register Usage:: +* Calling Conventions Parameter Passing:: +* Calling Conventions User-Provided Routines:: +@end menu +@end ifinfo + +@ifinfo +@node Calling Conventions Introduction, Calling Conventions Processor Background, Calling Conventions, Calling Conventions +@end ifinfo +@section Introduction + +Each high-level language compiler generates +subroutine entry and exit code based upon a set of rules known +as the compiler's calling convention. These rules address the +following issues: + +@itemize @bullet +@item register preservation and usage + +@item parameter passing + +@item call and return mechanism +@end itemize + +A compiler's calling convention is of importance when +interfacing to subroutines written in another language either +assembly or high-level. Even when the high-level language and +target processor are the same, different compilers may use +different calling conventions. As a result, calling conventions +are both processor and compiler dependent. + +@ifinfo +@node Calling Conventions Processor Background, Calling Conventions Calling Mechanism, Calling Conventions Introduction, Calling Conventions +@end ifinfo +@section Processor Background + +The i386 architecture supports a simple yet effective +call and return mechanism. A subroutine is invoked via the call +(call) instruction. This instruction pushes the return address +on the stack. The return from subroutine (ret) instruction pops +the return address off the current stack and transfers control +to that instruction. It is is important to note that the i386 +call and return mechanism does not automatically save or restore +any registers. It is the responsibility of the high-level +language compiler to define the register preservation and usage +convention. + +@ifinfo +@node Calling Conventions Calling Mechanism, Calling Conventions Register Usage, Calling Conventions Processor Background, Calling Conventions +@end ifinfo +@section Calling Mechanism + +All RTEMS directives are invoked using a call +instruction and return to the user application via the ret +instruction. + +@ifinfo +@node Calling Conventions Register Usage, Calling Conventions Parameter Passing, Calling Conventions Calling Mechanism, Calling Conventions +@end ifinfo +@section Register Usage + +As discussed above, the call instruction does not +automatically save any registers. RTEMS uses the registers EAX, +ECX, and EDX as scratch registers. These registers are not +preserved by RTEMS directives therefore, the contents of these +registers should not be assumed upon return from any RTEMS +directive. + +@ifinfo +@node Calling Conventions Parameter Passing, Calling Conventions User-Provided Routines, Calling Conventions Register Usage, Calling Conventions +@end ifinfo +@section Parameter Passing + +RTEMS assumes that arguments are placed on the +current stack before the directive is invoked via the call +instruction. The first argument is assumed to be closest to the +return address on the stack. This means that the first argument +of the C calling sequence is pushed last. The following +pseudo-code illustrates the typical sequence used to call a +RTEMS directive with three (3) arguments: + +@example +push third argument +push second argument +push first argument +invoke directive +remove arguments from the stack +@end example + +The arguments to RTEMS are typically pushed onto the +stack using a push instruction. These arguments must be removed +from the stack after control is returned to the caller. This +removal is typically accomplished by adding the size of the +argument list in bytes to the stack pointer. + +@ifinfo +@node Calling Conventions User-Provided Routines, Memory Model, Calling Conventions Parameter Passing, Calling Conventions +@end ifinfo +@section User-Provided Routines + +All user-provided routines invoked by RTEMS, such as +user extensions, device drivers, and MPCI routines, must also +adhere to these calling conventions. + diff --git a/doc/supplements/i386/cpumodel.t b/doc/supplements/i386/cpumodel.t new file mode 100644 index 0000000000..4504572dca --- /dev/null +++ b/doc/supplements/i386/cpumodel.t @@ -0,0 +1,81 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node CPU Model Dependent Features, CPU Model Dependent Features Introduction, Preface, Top +@end ifinfo +@chapter CPU Model Dependent Features +@ifinfo +@menu +* CPU Model Dependent Features Introduction:: +* CPU Model Dependent Features CPU Model Name:: +* CPU Model Dependent Features Floating Point Unit:: +@end menu +@end ifinfo + +@ifinfo +@node CPU Model Dependent Features Introduction, CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features, CPU Model Dependent Features +@end ifinfo +@section Introduction + +Microprocessors are generally classified into +families with a variety of CPU models or implementations within +that family. Within a processor family, there is a high level +of binary compatibility. This family may be based on either an +architectural specification or on maintaining compatibility with +a popular processor. Recent microprocessor families such as the +SPARC or PA-RISC are based on an architectural specification +which is independent or any particular CPU model or +implementation. Older families such as the M68xxx and the iX86 +evolved as the manufacturer strived to produce higher +performance processor models which maintained binary +compatibility with older models. + +RTEMS takes advantage of the similarity of the +various models within a CPU family. Although the models do vary +in significant ways, the high level of compatibility makes it +possible to share the bulk of the CPU dependent executive code +across the entire family. Each processor family supported by +RTEMS has a list of features which vary between CPU models +within a family. For example, the most common model dependent +feature regardless of CPU family is the presence or absence of a +floating point unit or coprocessor. When defining the list of +features present on a particular CPU model, one simply notes +that floating point hardware is or is not present and defines a +single constant appropriately. Conditional compilation is +utilized to include the appropriate source code for this CPU +model's feature set. It is important to note that this means +that RTEMS is thus compiled using the appropriate feature set +and compilation flags optimal for this CPU model used. The +alternative would be to generate a binary which would execute on +all family members using only the features which were always +present. + +This chapter presents the set of features which vary +across i386 implementations and are of importance to RTEMS. +The set of CPU model feature macros are defined in the file +c/src/exec/score/cpu/i386/i386.h based upon the particular CPU +model defined on the compilation command line. + +@ifinfo +@node CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features Floating Point Unit, CPU Model Dependent Features Introduction, CPU Model Dependent Features +@end ifinfo +@section CPU Model Name + +The macro CPU_MODEL_NAME is a string which designates +the name of this CPU model. For example, for the Intel i386 without an +i387 coprocessor, this macro is set to the string "i386 with i387". + +@ifinfo +@node CPU Model Dependent Features Floating Point Unit, Calling Conventions, CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features +@end ifinfo +@section Floating Point Unit + +The macro I386_HAS_FPU is set to 1 to indicate that +this CPU model has a hardware floating point unit and 0 +otherwise. The hardware floating point may be on-chip (as in the +case of an i486DX or Pentium) or as a coprocessor (as in the case of +an i386/i387 combination). diff --git a/doc/supplements/i386/cpumodel.texi b/doc/supplements/i386/cpumodel.texi new file mode 100644 index 0000000000..4504572dca --- /dev/null +++ b/doc/supplements/i386/cpumodel.texi @@ -0,0 +1,81 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node CPU Model Dependent Features, CPU Model Dependent Features Introduction, Preface, Top +@end ifinfo +@chapter CPU Model Dependent Features +@ifinfo +@menu +* CPU Model Dependent Features Introduction:: +* CPU Model Dependent Features CPU Model Name:: +* CPU Model Dependent Features Floating Point Unit:: +@end menu +@end ifinfo + +@ifinfo +@node CPU Model Dependent Features Introduction, CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features, CPU Model Dependent Features +@end ifinfo +@section Introduction + +Microprocessors are generally classified into +families with a variety of CPU models or implementations within +that family. Within a processor family, there is a high level +of binary compatibility. This family may be based on either an +architectural specification or on maintaining compatibility with +a popular processor. Recent microprocessor families such as the +SPARC or PA-RISC are based on an architectural specification +which is independent or any particular CPU model or +implementation. Older families such as the M68xxx and the iX86 +evolved as the manufacturer strived to produce higher +performance processor models which maintained binary +compatibility with older models. + +RTEMS takes advantage of the similarity of the +various models within a CPU family. Although the models do vary +in significant ways, the high level of compatibility makes it +possible to share the bulk of the CPU dependent executive code +across the entire family. Each processor family supported by +RTEMS has a list of features which vary between CPU models +within a family. For example, the most common model dependent +feature regardless of CPU family is the presence or absence of a +floating point unit or coprocessor. When defining the list of +features present on a particular CPU model, one simply notes +that floating point hardware is or is not present and defines a +single constant appropriately. Conditional compilation is +utilized to include the appropriate source code for this CPU +model's feature set. It is important to note that this means +that RTEMS is thus compiled using the appropriate feature set +and compilation flags optimal for this CPU model used. The +alternative would be to generate a binary which would execute on +all family members using only the features which were always +present. + +This chapter presents the set of features which vary +across i386 implementations and are of importance to RTEMS. +The set of CPU model feature macros are defined in the file +c/src/exec/score/cpu/i386/i386.h based upon the particular CPU +model defined on the compilation command line. + +@ifinfo +@node CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features Floating Point Unit, CPU Model Dependent Features Introduction, CPU Model Dependent Features +@end ifinfo +@section CPU Model Name + +The macro CPU_MODEL_NAME is a string which designates +the name of this CPU model. For example, for the Intel i386 without an +i387 coprocessor, this macro is set to the string "i386 with i387". + +@ifinfo +@node CPU Model Dependent Features Floating Point Unit, Calling Conventions, CPU Model Dependent Features CPU Model Name, CPU Model Dependent Features +@end ifinfo +@section Floating Point Unit + +The macro I386_HAS_FPU is set to 1 to indicate that +this CPU model has a hardware floating point unit and 0 +otherwise. The hardware floating point may be on-chip (as in the +case of an i486DX or Pentium) or as a coprocessor (as in the case of +an i386/i387 combination). diff --git a/doc/supplements/i386/cputable.t b/doc/supplements/i386/cputable.t new file mode 100644 index 0000000000..aea8db223e --- /dev/null +++ b/doc/supplements/i386/cputable.t @@ -0,0 +1,126 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Processor Dependent Information Table, Processor Dependent Information Table Introduction, Board Support Packages Processor Initialization, Top +@end ifinfo +@chapter Processor Dependent Information Table +@ifinfo +@menu +* Processor Dependent Information Table Introduction:: +* Processor Dependent Information Table CPU Dependent Information Table:: +@end menu +@end ifinfo + +@ifinfo +@node Processor Dependent Information Table Introduction, Processor Dependent Information Table CPU Dependent Information Table, Processor Dependent Information Table, Processor Dependent Information Table +@end ifinfo +@section Introduction + +Any highly processor dependent information required +to describe a processor to RTEMS is provided in the CPU +Dependent Information Table. This table is not required for all +processors supported by RTEMS. This chapter describes the +contents, if any, for a particular processor type. + +@ifinfo +@node Processor Dependent Information Table CPU Dependent Information Table, Memory Requirements, Processor Dependent Information Table Introduction, Processor Dependent Information Table +@end ifinfo +@section CPU Dependent Information Table + +The i386 version of the RTEMS CPU Dependent +Information Table contains the information required to interface +a Board Support Package and RTEMS on the i386. This information +is provided to allow RTEMS to interoperate effectively with the +BSP. The C structure definition is given here: + +@example +struct cpu_configuration_table @{ + void (*pretasking_hook)( void ); + void (*predriver_hook)( void ); + void (*idle_task)( void ); + boolean do_zero_of_workspace; + unsigned32 interrupt_stack_size; + unsigned32 extra_mpci_receive_server_stack; + void * (*stack_allocate_hook)( unsigned32 ); + void (*stack_free_hook)( void* ); + /* end of fields required on all CPUs */ + + unsigned32 interrupt_segment; + void *interrupt_vector_table; +@}; +@end example + +@table @code +@item pretasking_hook +is the address of the +user provided routine which is invoked once RTEMS initialization +is complete but before interrupts and tasking are enabled. This +field may be NULL to indicate that the hook is not utilized. + +@item predriver_hook +is the address of the user provided +routine which is invoked with tasking enabled immediately before +the MPCI and device drivers are initialized. RTEMS +initialization is complete, interrupts and tasking are enabled, +but no device drivers are initialized. This field may be NULL to +indicate that the hook is not utilized. + +@item postdriver_hook +is the address of the user provided +routine which is invoked with tasking enabled immediately after +the MPCI and device drivers are initialized. RTEMS +initialization is complete, interrupts and tasking are enabled, +and the device drivers are initialized. This field may be NULL +to indicate that the hook is not utilized. + +@item idle_task +is the address of the optional user +provided routine which is used as the system's IDLE task. If +this field is not NULL, then the RTEMS default IDLE task is not +used. This field may be NULL to indicate that the default IDLE +is to be used. + +@item do_zero_of_workspace +indicates whether RTEMS should +zero the Workspace as part of its initialization. If set to +TRUE, the Workspace is zeroed. Otherwise, it is not. + +@item interrupt_stack_size +is the size of the RTEMS +allocated interrupt stack in bytes. This value must be at least +as large as MINIMUM_STACK_SIZE. + +@item extra_mpci_receive_server_stack +is the extra stack space allocated for the RTEMS MPCI receive server task +in bytes. The MPCI receive server may invoke nearly all directives and +may require extra stack space on some targets. + +@item stack_allocate_hook +is the address of the optional user provided routine which allocates +memory for task stacks. If this hook is not NULL, then a stack_free_hook +must be provided as well. + +@item stack_free_hook +is the address of the optional user provided routine which frees +memory for task stacks. If this hook is not NULL, then a stack_allocate_hook +must be provided as well. + +@item interrupt_segment +is the value of the selector which should be placed in a segment +register to access the Interrupt Descriptor Table. + +@item interrupt_vector_table +is the base address of the Interrupt Descriptor Table relative to the +interrupt_segment. + +@end table + +The contents of the i386 Interrupt Descriptor Table +are discussed in Intel's i386 User's Manual. Structure +definitions for the i386 IDT is provided by including the file +rtems.h. + diff --git a/doc/supplements/i386/cputable.texi b/doc/supplements/i386/cputable.texi new file mode 100644 index 0000000000..aea8db223e --- /dev/null +++ b/doc/supplements/i386/cputable.texi @@ -0,0 +1,126 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Processor Dependent Information Table, Processor Dependent Information Table Introduction, Board Support Packages Processor Initialization, Top +@end ifinfo +@chapter Processor Dependent Information Table +@ifinfo +@menu +* Processor Dependent Information Table Introduction:: +* Processor Dependent Information Table CPU Dependent Information Table:: +@end menu +@end ifinfo + +@ifinfo +@node Processor Dependent Information Table Introduction, Processor Dependent Information Table CPU Dependent Information Table, Processor Dependent Information Table, Processor Dependent Information Table +@end ifinfo +@section Introduction + +Any highly processor dependent information required +to describe a processor to RTEMS is provided in the CPU +Dependent Information Table. This table is not required for all +processors supported by RTEMS. This chapter describes the +contents, if any, for a particular processor type. + +@ifinfo +@node Processor Dependent Information Table CPU Dependent Information Table, Memory Requirements, Processor Dependent Information Table Introduction, Processor Dependent Information Table +@end ifinfo +@section CPU Dependent Information Table + +The i386 version of the RTEMS CPU Dependent +Information Table contains the information required to interface +a Board Support Package and RTEMS on the i386. This information +is provided to allow RTEMS to interoperate effectively with the +BSP. The C structure definition is given here: + +@example +struct cpu_configuration_table @{ + void (*pretasking_hook)( void ); + void (*predriver_hook)( void ); + void (*idle_task)( void ); + boolean do_zero_of_workspace; + unsigned32 interrupt_stack_size; + unsigned32 extra_mpci_receive_server_stack; + void * (*stack_allocate_hook)( unsigned32 ); + void (*stack_free_hook)( void* ); + /* end of fields required on all CPUs */ + + unsigned32 interrupt_segment; + void *interrupt_vector_table; +@}; +@end example + +@table @code +@item pretasking_hook +is the address of the +user provided routine which is invoked once RTEMS initialization +is complete but before interrupts and tasking are enabled. This +field may be NULL to indicate that the hook is not utilized. + +@item predriver_hook +is the address of the user provided +routine which is invoked with tasking enabled immediately before +the MPCI and device drivers are initialized. RTEMS +initialization is complete, interrupts and tasking are enabled, +but no device drivers are initialized. This field may be NULL to +indicate that the hook is not utilized. + +@item postdriver_hook +is the address of the user provided +routine which is invoked with tasking enabled immediately after +the MPCI and device drivers are initialized. RTEMS +initialization is complete, interrupts and tasking are enabled, +and the device drivers are initialized. This field may be NULL +to indicate that the hook is not utilized. + +@item idle_task +is the address of the optional user +provided routine which is used as the system's IDLE task. If +this field is not NULL, then the RTEMS default IDLE task is not +used. This field may be NULL to indicate that the default IDLE +is to be used. + +@item do_zero_of_workspace +indicates whether RTEMS should +zero the Workspace as part of its initialization. If set to +TRUE, the Workspace is zeroed. Otherwise, it is not. + +@item interrupt_stack_size +is the size of the RTEMS +allocated interrupt stack in bytes. This value must be at least +as large as MINIMUM_STACK_SIZE. + +@item extra_mpci_receive_server_stack +is the extra stack space allocated for the RTEMS MPCI receive server task +in bytes. The MPCI receive server may invoke nearly all directives and +may require extra stack space on some targets. + +@item stack_allocate_hook +is the address of the optional user provided routine which allocates +memory for task stacks. If this hook is not NULL, then a stack_free_hook +must be provided as well. + +@item stack_free_hook +is the address of the optional user provided routine which frees +memory for task stacks. If this hook is not NULL, then a stack_allocate_hook +must be provided as well. + +@item interrupt_segment +is the value of the selector which should be placed in a segment +register to access the Interrupt Descriptor Table. + +@item interrupt_vector_table +is the base address of the Interrupt Descriptor Table relative to the +interrupt_segment. + +@end table + +The contents of the i386 Interrupt Descriptor Table +are discussed in Intel's i386 User's Manual. Structure +definitions for the i386 IDT is provided by including the file +rtems.h. + diff --git a/doc/supplements/i386/fatalerr.t b/doc/supplements/i386/fatalerr.t new file mode 100644 index 0000000000..2743eb9a05 --- /dev/null +++ b/doc/supplements/i386/fatalerr.t @@ -0,0 +1,44 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Default Fatal Error Processing, Default Fatal Error Processing Introduction, Interrupt Processing Interrupt Stack, Top +@end ifinfo +@chapter Default Fatal Error Processing +@ifinfo +@menu +* Default Fatal Error Processing Introduction:: +* Default Fatal Error Processing Default Fatal Error Handler Operations:: +@end menu +@end ifinfo + +@ifinfo +@node Default Fatal Error Processing Introduction, Default Fatal Error Processing Default Fatal Error Handler Operations, Default Fatal Error Processing, Default Fatal Error Processing +@end ifinfo +@section Introduction + +Upon detection of a fatal error by either the +application or RTEMS the fatal error manager is invoked. The +fatal error manager will invoke the user-supplied fatal error +handlers. If no user-supplied handlers are configured, the +RTEMS provided default fatal error handler is invoked. If the +user-supplied fatal error handlers return to the executive the +default fatal error handler is then invoked. This chapter +describes the precise operations of the default fatal error +handler. + +@ifinfo +@node Default Fatal Error Processing Default Fatal Error Handler Operations, Board Support Packages, Default Fatal Error Processing Introduction, Default Fatal Error Processing +@end ifinfo +@section Default Fatal Error Handler Operations + +The default fatal error handler which is invoked by +the fatal_error_occurred directive when there is no user handler +configured or the user handler returns control to RTEMS. The +default fatal error handler disables processor interrupts, +places the error code in EAX, and executes a HLT instruction to +halt the processor. + diff --git a/doc/supplements/i386/fatalerr.texi b/doc/supplements/i386/fatalerr.texi new file mode 100644 index 0000000000..2743eb9a05 --- /dev/null +++ b/doc/supplements/i386/fatalerr.texi @@ -0,0 +1,44 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Default Fatal Error Processing, Default Fatal Error Processing Introduction, Interrupt Processing Interrupt Stack, Top +@end ifinfo +@chapter Default Fatal Error Processing +@ifinfo +@menu +* Default Fatal Error Processing Introduction:: +* Default Fatal Error Processing Default Fatal Error Handler Operations:: +@end menu +@end ifinfo + +@ifinfo +@node Default Fatal Error Processing Introduction, Default Fatal Error Processing Default Fatal Error Handler Operations, Default Fatal Error Processing, Default Fatal Error Processing +@end ifinfo +@section Introduction + +Upon detection of a fatal error by either the +application or RTEMS the fatal error manager is invoked. The +fatal error manager will invoke the user-supplied fatal error +handlers. If no user-supplied handlers are configured, the +RTEMS provided default fatal error handler is invoked. If the +user-supplied fatal error handlers return to the executive the +default fatal error handler is then invoked. This chapter +describes the precise operations of the default fatal error +handler. + +@ifinfo +@node Default Fatal Error Processing Default Fatal Error Handler Operations, Board Support Packages, Default Fatal Error Processing Introduction, Default Fatal Error Processing +@end ifinfo +@section Default Fatal Error Handler Operations + +The default fatal error handler which is invoked by +the fatal_error_occurred directive when there is no user handler +configured or the user handler returns control to RTEMS. The +default fatal error handler disables processor interrupts, +places the error code in EAX, and executes a HLT instruction to +halt the processor. + diff --git a/doc/supplements/i386/i386.texi b/doc/supplements/i386/i386.texi new file mode 100644 index 0000000000..8f0be73fda --- /dev/null +++ b/doc/supplements/i386/i386.texi @@ -0,0 +1,123 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +\input ../texinfo/texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename c_i386 +@syncodeindex vr fn +@synindex ky cp +@paragraphindent 0 +@c @smallbook +@c %**end of header + +@c +@c COPYRIGHT (c) 1988-1996. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@c +@c Master file for the Intel i386 C Applications Supplement +@c + +@include ../common/setup.texi + +@ignore +@ifinfo +@format +START-INFO-DIR-ENTRY +* RTEMS Intel i386 C Applications Supplement (i386): +END-INFO-DIR-ENTRY +@end format +@end ifinfo +@end ignore + +@c +@c Title Page Stuff +@c + +@set edition 4.0.0a +@set update-date 25 April 1997 +@set update-month April 1997 + +@c +@c I don't really like having a short title page. --joel +@c +@c @shorttitlepage RTEMS Intel i386 C Applications Supplement + +@setchapternewpage odd +@settitle RTEMS Intel i386 C Applications Supplement +@titlepage +@finalout + +@title RTEMS Intel i386 C Supplement +@subtitle Edition @value{edition}, for RTEMS 4.0.0 +@sp 1 +@subtitle @value{update-month} +@author On-Line Applications Research Corporation +@page +@include ../common/cpright.texi +@end titlepage + +@c This prevents a black box from being printed on "overflow" lines. +@c The alternative is to rework a sentence to avoid this problem. + +@include preface.texi +@include cpumodel.texi +@include callconv.texi +@include memmodel.texi +@include intr.texi +@include fatalerr.texi +@include bsp.texi +@include cputable.texi +@include wksheets.texi +@include ../common/timing.texi +@include timedata.texi +@ifinfo +@node Top, Preface, (dir), (dir) +@top c_i386 + +This is the online version of the RTEMS Intel i386 C +Applications Supplement. + +@menu +* Preface:: +* CPU Model Dependent Features:: +* Calling Conventions:: +* Memory Model:: +* Interrupt Processing:: +* Default Fatal Error Processing:: +* Board Support Packages:: +* Processor Dependent Information Table:: +* Memory Requirements:: +* Timing Specification:: +* i386 Timing Data:: +* Command and Variable Index:: +* Concept Index:: +@end menu + +@end ifinfo +@c +@c +@c Need to copy the emacs stuff and "trailer stuff" (index, toc) into here +@c + +@node Command and Variable Index, Concept Index, i386 Timing Data Rate Monotonic Manager, Top +@unnumbered Command and Variable Index + +There are currently no Command and Variable Index entries. + +@c @printindex fn + +@node Concept Index, , Command and Variable Index, Top +@unnumbered Concept Index + +There are currently no Concept Index entries. +@c @printindex cp + +@c @contents +@bye + diff --git a/doc/supplements/i386/intr.t b/doc/supplements/i386/intr.t new file mode 100644 index 0000000000..5c36183970 --- /dev/null +++ b/doc/supplements/i386/intr.t @@ -0,0 +1,191 @@ +@ifinfo +@node Interrupt Processing, Interrupt Processing Introduction, Memory Model Flat Memory Model, Top +@end ifinfo +@chapter Interrupt Processing +@ifinfo +@menu +* Interrupt Processing Introduction:: +* Interrupt Processing Vectoring of Interrupt Handler:: +* Interrupt Processing Interrupt Stack Frame:: +* Interrupt Processing Interrupt Levels:: +* Interrupt Processing Disabling of Interrupts by RTEMS:: +* Interrupt Processing Interrupt Stack:: +@end menu +@end ifinfo + +@ifinfo +@node Interrupt Processing Introduction, Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing, Interrupt Processing +@end ifinfo +@section Introduction + +Different types of processors respond to the +occurrence of an interrupt in their own unique fashion. In +addition, each processor type provides a control mechanism to +allow the proper handling of an interrupt. The processor +dependent response to the interrupt modifies the execution state +and results in the modification of the execution stream. This +modification usually requires that an interrupt handler utilize +the provided control mechanisms to return to the normal +processing stream. Although RTEMS hides many of the processor +dependent details of interrupt processing, it is important to +understand how the RTEMS interrupt manager is mapped onto the +processor's unique architecture. Discussed in this chapter are +the the processor's response and control mechanisms as they +pertain to RTEMS. + +@ifinfo +@node Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing Interrupt Stack Frame, Interrupt Processing Introduction, Interrupt Processing +@end ifinfo +@section Vectoring of Interrupt Handler + +Although the i386 supports multiple privilege levels, +RTEMS and all user software executes at privilege level 0. This +decision was made by the RTEMS designers to enhance +compatibility with processors which do not provide sophisticated +protection facilities like those of the i386. This decision +greatly simplifies the discussion of i386 processing, as one +need only consider interrupts without privilege transitions. + +Upon receipt of an interrupt the i386 automatically +performs the following actions: + +@itemize @bullet +@item pushes the EFLAGS register + +@item pushes the far address of the interrupted instruction + +@item vectors to the interrupt service routine (ISR). +@end itemize + +A nested interrupt is processed similarly by the +i386. + +@ifinfo +@node Interrupt Processing Interrupt Stack Frame, Interrupt Processing Interrupt Levels, Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing +@end ifinfo +@section Interrupt Stack Frame + +The structure of the Interrupt Stack Frame for the +i386 which is placed on the interrupt stack by the processor in +response to an interrupt is as follows: + +@ifset use-ascii +@example +@group + +----------------------+ + | Old EFLAGS Register | ESP+8 + +----------+-----------+ + | UNUSED | Old CS | ESP+4 + +----------+-----------+ + | Old EIP | ESP + +----------------------+ +@end group +@end example +@end ifset + +@ifset use-tex +@sp 1 +@tex +\centerline{\vbox{\offinterlineskip\halign{ +\strut\vrule#& +\hbox to 1.00in{\enskip\hfil#\hfil}& +\vrule#& +\hbox to 1.00in{\enskip\hfil#\hfil}& +\vrule#& +\hbox to 0.75in{\enskip\hfil#\hfil} +\cr +\multispan{4}\hrulefill\cr +& \multispan{3} Old EFLAGS Register\quad&&ESP+8\cr +\multispan{4}\hrulefill\cr +&UNUSED &&Old CS &&ESP+4\cr +\multispan{4}\hrulefill\cr +& \multispan{3} Old EIP && ESP\cr +\multispan{4}\hrulefill\cr +}}\hfil} +@end tex +@end ifset + +@ifset use-html +@html +<CENTER> + <TABLE COLS=3 WIDTH="40%" BORDER=2> +<TR><TD ALIGN=center COLSPAN=2><STRONG>Old EFLAGS Register</STRONG></TD> + <TD ALIGN=center>0x0</TD></TR> +<TR><TD ALIGN=center><STRONG>UNUSED</STRONG></TD> + <TD ALIGN=center><STRONG>Old CS</STRONG></TD> + <TD ALIGN=center>0x2</TD></TR> +<TR><TD ALIGN=center COLSPAN=2><STRONG>Old EIP</STRONG></TD> + <TD ALIGN=center>0x4</TD></TR> + </TABLE> +</CENTER> +@end html +@end ifset + +@ifinfo +@node Interrupt Processing Interrupt Levels, Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing Interrupt Stack Frame, Interrupt Processing +@end ifinfo +@section Interrupt Levels + +Although RTEMS supports 256 interrupt levels, the +i386 only supports two -- enabled and disabled. Interrupts are +enabled when the interrupt-enable flag (IF) in the extended +flags (EFLAGS) is set. Conversely, interrupt processing is +inhibited when the IF is cleared. During a non-maskable +interrupt, all other interrupts, including other non-maskable +ones, are inhibited. + +RTEMS interrupt levels 0 and 1 such that level zero +(0) indicates that interrupts are fully enabled and level one +that interrupts are disabled. All other RTEMS interrupt levels +are undefined and their behavior is unpredictable. + +@ifinfo +@node Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing Interrupt Stack, Interrupt Processing Interrupt Levels, Interrupt Processing +@end ifinfo +@section Disabling of Interrupts by RTEMS + +During the execution of directive calls, critical +sections of code may be executed. When these sections are +encountered, RTEMS disables interrupts before the execution of +this section and restores them to the previous level upon +completion of the section. RTEMS has been optimized to insure +that interrupts are disabled for less than RTEMS_MAXIMUM_DISABLE_PERIOD +microseconds on a RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ Mhz i386 with zero +wait states. These numbers will vary based the number of wait states +and processor speed present on the target board. [NOTE: The maximum +period with interrupts disabled within RTEMS was last calculated for +Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.] + +Non-maskable interrupts (NMI) cannot be disabled, and +ISRs which execute at this level MUST NEVER issue RTEMS system +calls. If a directive is invoked, unpredictable results may +occur due to the inability of RTEMS to protect its critical +sections. However, ISRs that make no system calls may safely +execute as non-maskable interrupts. + +@ifinfo +@node Interrupt Processing Interrupt Stack, Default Fatal Error Processing, Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing +@end ifinfo +@section Interrupt Stack + +The i386 family does not support a dedicated hardware +interrupt stack. On this processor, RTEMS allocates and manages +a dedicated interrupt stack. As part of vectoring a non-nested +interrupt service routine, RTEMS switches from the stack of the +interrupted task to a dedicated interrupt stack. When a +non-nested interrupt returns, RTEMS switches back to the stack +of the interrupted stack. The current stack pointer is not +altered by RTEMS on nested interrupt. + +Without a dedicated interrupt stack, every task in +the system MUST have enough stack space to accommodate the worst +case stack usage of that particular task and the interrupt +service routines COMBINED. By supporting a dedicated interrupt +stack, RTEMS significantly lowers the stack requirements for +each task. + +RTEMS allocates the dedicated interrupt stack from +the Workspace Area. The amount of memory allocated for the +interrupt stack is determined by the interrupt_stack_size field +in the CPU Configuration Table. + diff --git a/doc/supplements/i386/intr_NOTIMES.t b/doc/supplements/i386/intr_NOTIMES.t new file mode 100644 index 0000000000..5c36183970 --- /dev/null +++ b/doc/supplements/i386/intr_NOTIMES.t @@ -0,0 +1,191 @@ +@ifinfo +@node Interrupt Processing, Interrupt Processing Introduction, Memory Model Flat Memory Model, Top +@end ifinfo +@chapter Interrupt Processing +@ifinfo +@menu +* Interrupt Processing Introduction:: +* Interrupt Processing Vectoring of Interrupt Handler:: +* Interrupt Processing Interrupt Stack Frame:: +* Interrupt Processing Interrupt Levels:: +* Interrupt Processing Disabling of Interrupts by RTEMS:: +* Interrupt Processing Interrupt Stack:: +@end menu +@end ifinfo + +@ifinfo +@node Interrupt Processing Introduction, Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing, Interrupt Processing +@end ifinfo +@section Introduction + +Different types of processors respond to the +occurrence of an interrupt in their own unique fashion. In +addition, each processor type provides a control mechanism to +allow the proper handling of an interrupt. The processor +dependent response to the interrupt modifies the execution state +and results in the modification of the execution stream. This +modification usually requires that an interrupt handler utilize +the provided control mechanisms to return to the normal +processing stream. Although RTEMS hides many of the processor +dependent details of interrupt processing, it is important to +understand how the RTEMS interrupt manager is mapped onto the +processor's unique architecture. Discussed in this chapter are +the the processor's response and control mechanisms as they +pertain to RTEMS. + +@ifinfo +@node Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing Interrupt Stack Frame, Interrupt Processing Introduction, Interrupt Processing +@end ifinfo +@section Vectoring of Interrupt Handler + +Although the i386 supports multiple privilege levels, +RTEMS and all user software executes at privilege level 0. This +decision was made by the RTEMS designers to enhance +compatibility with processors which do not provide sophisticated +protection facilities like those of the i386. This decision +greatly simplifies the discussion of i386 processing, as one +need only consider interrupts without privilege transitions. + +Upon receipt of an interrupt the i386 automatically +performs the following actions: + +@itemize @bullet +@item pushes the EFLAGS register + +@item pushes the far address of the interrupted instruction + +@item vectors to the interrupt service routine (ISR). +@end itemize + +A nested interrupt is processed similarly by the +i386. + +@ifinfo +@node Interrupt Processing Interrupt Stack Frame, Interrupt Processing Interrupt Levels, Interrupt Processing Vectoring of Interrupt Handler, Interrupt Processing +@end ifinfo +@section Interrupt Stack Frame + +The structure of the Interrupt Stack Frame for the +i386 which is placed on the interrupt stack by the processor in +response to an interrupt is as follows: + +@ifset use-ascii +@example +@group + +----------------------+ + | Old EFLAGS Register | ESP+8 + +----------+-----------+ + | UNUSED | Old CS | ESP+4 + +----------+-----------+ + | Old EIP | ESP + +----------------------+ +@end group +@end example +@end ifset + +@ifset use-tex +@sp 1 +@tex +\centerline{\vbox{\offinterlineskip\halign{ +\strut\vrule#& +\hbox to 1.00in{\enskip\hfil#\hfil}& +\vrule#& +\hbox to 1.00in{\enskip\hfil#\hfil}& +\vrule#& +\hbox to 0.75in{\enskip\hfil#\hfil} +\cr +\multispan{4}\hrulefill\cr +& \multispan{3} Old EFLAGS Register\quad&&ESP+8\cr +\multispan{4}\hrulefill\cr +&UNUSED &&Old CS &&ESP+4\cr +\multispan{4}\hrulefill\cr +& \multispan{3} Old EIP && ESP\cr +\multispan{4}\hrulefill\cr +}}\hfil} +@end tex +@end ifset + +@ifset use-html +@html +<CENTER> + <TABLE COLS=3 WIDTH="40%" BORDER=2> +<TR><TD ALIGN=center COLSPAN=2><STRONG>Old EFLAGS Register</STRONG></TD> + <TD ALIGN=center>0x0</TD></TR> +<TR><TD ALIGN=center><STRONG>UNUSED</STRONG></TD> + <TD ALIGN=center><STRONG>Old CS</STRONG></TD> + <TD ALIGN=center>0x2</TD></TR> +<TR><TD ALIGN=center COLSPAN=2><STRONG>Old EIP</STRONG></TD> + <TD ALIGN=center>0x4</TD></TR> + </TABLE> +</CENTER> +@end html +@end ifset + +@ifinfo +@node Interrupt Processing Interrupt Levels, Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing Interrupt Stack Frame, Interrupt Processing +@end ifinfo +@section Interrupt Levels + +Although RTEMS supports 256 interrupt levels, the +i386 only supports two -- enabled and disabled. Interrupts are +enabled when the interrupt-enable flag (IF) in the extended +flags (EFLAGS) is set. Conversely, interrupt processing is +inhibited when the IF is cleared. During a non-maskable +interrupt, all other interrupts, including other non-maskable +ones, are inhibited. + +RTEMS interrupt levels 0 and 1 such that level zero +(0) indicates that interrupts are fully enabled and level one +that interrupts are disabled. All other RTEMS interrupt levels +are undefined and their behavior is unpredictable. + +@ifinfo +@node Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing Interrupt Stack, Interrupt Processing Interrupt Levels, Interrupt Processing +@end ifinfo +@section Disabling of Interrupts by RTEMS + +During the execution of directive calls, critical +sections of code may be executed. When these sections are +encountered, RTEMS disables interrupts before the execution of +this section and restores them to the previous level upon +completion of the section. RTEMS has been optimized to insure +that interrupts are disabled for less than RTEMS_MAXIMUM_DISABLE_PERIOD +microseconds on a RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ Mhz i386 with zero +wait states. These numbers will vary based the number of wait states +and processor speed present on the target board. [NOTE: The maximum +period with interrupts disabled within RTEMS was last calculated for +Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.] + +Non-maskable interrupts (NMI) cannot be disabled, and +ISRs which execute at this level MUST NEVER issue RTEMS system +calls. If a directive is invoked, unpredictable results may +occur due to the inability of RTEMS to protect its critical +sections. However, ISRs that make no system calls may safely +execute as non-maskable interrupts. + +@ifinfo +@node Interrupt Processing Interrupt Stack, Default Fatal Error Processing, Interrupt Processing Disabling of Interrupts by RTEMS, Interrupt Processing +@end ifinfo +@section Interrupt Stack + +The i386 family does not support a dedicated hardware +interrupt stack. On this processor, RTEMS allocates and manages +a dedicated interrupt stack. As part of vectoring a non-nested +interrupt service routine, RTEMS switches from the stack of the +interrupted task to a dedicated interrupt stack. When a +non-nested interrupt returns, RTEMS switches back to the stack +of the interrupted stack. The current stack pointer is not +altered by RTEMS on nested interrupt. + +Without a dedicated interrupt stack, every task in +the system MUST have enough stack space to accommodate the worst +case stack usage of that particular task and the interrupt +service routines COMBINED. By supporting a dedicated interrupt +stack, RTEMS significantly lowers the stack requirements for +each task. + +RTEMS allocates the dedicated interrupt stack from +the Workspace Area. The amount of memory allocated for the +interrupt stack is determined by the interrupt_stack_size field +in the CPU Configuration Table. + diff --git a/doc/supplements/i386/memmodel.t b/doc/supplements/i386/memmodel.t new file mode 100644 index 0000000000..3d4ca55410 --- /dev/null +++ b/doc/supplements/i386/memmodel.t @@ -0,0 +1,85 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Memory Model, Memory Model Introduction, Calling Conventions User-Provided Routines, Top +@end ifinfo +@chapter Memory Model +@ifinfo +@menu +* Memory Model Introduction:: +* Memory Model Flat Memory Model:: +@end menu +@end ifinfo + +@ifinfo +@node Memory Model Introduction, Memory Model Flat Memory Model, Memory Model, Memory Model +@end ifinfo +@section Introduction + +A processor may support any combination of memory +models ranging from pure physical addressing to complex demand +paged virtual memory systems. RTEMS supports a flat memory +model which ranges contiguously over the processor's allowable +address space. RTEMS does not support segmentation or virtual +memory of any kind. The appropriate memory model for RTEMS +provided by the targeted processor and related characteristics +of that model are described in this chapter. + +@ifinfo +@node Memory Model Flat Memory Model, Interrupt Processing, Memory Model Introduction, Memory Model +@end ifinfo +@section Flat Memory Model + +RTEMS supports the i386 protected mode, flat memory +model with paging disabled. In this mode, the i386 +automatically converts every address from a logical to a +physical address each time it is used. The i386 uses +information provided in the segment registers and the Global +Descriptor Table to convert these addresses. RTEMS assumes the +existence of the following segments: + +@itemize @bullet +@item a single code segment at protection level (0) which +contains all application and executive code. + +@item a single data segment at protection level zero (0) which +contains all application and executive data. +@end itemize + +The i386 segment registers and associated selectors +must be initialized when the initialize_executive directive is +invoked. RTEMS treats the segment registers as system registers +and does not modify or context switch them. + +This i386 memory model supports a flat 32-bit address +space with addresses ranging from 0x00000000 to 0xFFFFFFFF (4 +gigabytes). Each address is represented by a 32-bit value and +is byte addressable. The address may be used to reference a +single byte, half-word (2-bytes), or word (4 bytes). + +RTEMS does not require that logical addresses map +directly to physical addresses, although it is desirable in many +applications to do so. If logical and physical addresses are +not the same, then an additional selector will be required so +RTEMS can access the Interrupt Descriptor Table to install +interrupt service routines. The selector number of this segment +is provided to RTEMS in the CPU Dependent Information Table. + +By not requiring that logical addresses map directly +to physical addresses, the memory space of an RTEMS application +can be separated from that of a ROM monitor. For example, on +the Force Computers CPU386, the ROM monitor loads application +programs into a logical address space where logical address +0x00000000 corresponds to physical address 0x0002000. On this +board, RTEMS and the application use virtual addresses which do +not map to physical addresses. + +RTEMS assumes that the DS and ES registers contain +the selector for the single data segment when a directive is +invoked. This assumption is especially important when +developing interrupt service routines. + diff --git a/doc/supplements/i386/memmodel.texi b/doc/supplements/i386/memmodel.texi new file mode 100644 index 0000000000..3d4ca55410 --- /dev/null +++ b/doc/supplements/i386/memmodel.texi @@ -0,0 +1,85 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Memory Model, Memory Model Introduction, Calling Conventions User-Provided Routines, Top +@end ifinfo +@chapter Memory Model +@ifinfo +@menu +* Memory Model Introduction:: +* Memory Model Flat Memory Model:: +@end menu +@end ifinfo + +@ifinfo +@node Memory Model Introduction, Memory Model Flat Memory Model, Memory Model, Memory Model +@end ifinfo +@section Introduction + +A processor may support any combination of memory +models ranging from pure physical addressing to complex demand +paged virtual memory systems. RTEMS supports a flat memory +model which ranges contiguously over the processor's allowable +address space. RTEMS does not support segmentation or virtual +memory of any kind. The appropriate memory model for RTEMS +provided by the targeted processor and related characteristics +of that model are described in this chapter. + +@ifinfo +@node Memory Model Flat Memory Model, Interrupt Processing, Memory Model Introduction, Memory Model +@end ifinfo +@section Flat Memory Model + +RTEMS supports the i386 protected mode, flat memory +model with paging disabled. In this mode, the i386 +automatically converts every address from a logical to a +physical address each time it is used. The i386 uses +information provided in the segment registers and the Global +Descriptor Table to convert these addresses. RTEMS assumes the +existence of the following segments: + +@itemize @bullet +@item a single code segment at protection level (0) which +contains all application and executive code. + +@item a single data segment at protection level zero (0) which +contains all application and executive data. +@end itemize + +The i386 segment registers and associated selectors +must be initialized when the initialize_executive directive is +invoked. RTEMS treats the segment registers as system registers +and does not modify or context switch them. + +This i386 memory model supports a flat 32-bit address +space with addresses ranging from 0x00000000 to 0xFFFFFFFF (4 +gigabytes). Each address is represented by a 32-bit value and +is byte addressable. The address may be used to reference a +single byte, half-word (2-bytes), or word (4 bytes). + +RTEMS does not require that logical addresses map +directly to physical addresses, although it is desirable in many +applications to do so. If logical and physical addresses are +not the same, then an additional selector will be required so +RTEMS can access the Interrupt Descriptor Table to install +interrupt service routines. The selector number of this segment +is provided to RTEMS in the CPU Dependent Information Table. + +By not requiring that logical addresses map directly +to physical addresses, the memory space of an RTEMS application +can be separated from that of a ROM monitor. For example, on +the Force Computers CPU386, the ROM monitor loads application +programs into a logical address space where logical address +0x00000000 corresponds to physical address 0x0002000. On this +board, RTEMS and the application use virtual addresses which do +not map to physical addresses. + +RTEMS assumes that the DS and ES registers contain +the selector for the single data segment when a directive is +invoked. This assumption is especially important when +developing interrupt service routines. + diff --git a/doc/supplements/i386/preface.texi b/doc/supplements/i386/preface.texi new file mode 100644 index 0000000000..ce96fe2ea4 --- /dev/null +++ b/doc/supplements/i386/preface.texi @@ -0,0 +1,39 @@ +@c +@c COPYRIGHT (c) 1988-1997. +@c On-Line Applications Research Corporation (OAR). +@c All rights reserved. +@c + +@ifinfo +@node Preface, CPU Model Dependent Features, Top, Top +@end ifinfo +@unnumbered Preface + +The Real Time Executive for Multiprocessor Systems +(RTEMS) is designed to be portable across multiple processor +architectures. However, the nature of real-time systems makes +it essential that the application designer understand certain +processor dependent implementation details. These processor +dependencies include calling convention, board support package +issues, interrupt processing, exact RTEMS memory requirements, +performance data, header files, and the assembly language +interface to the executive. + +For information on the i386 processor, refer to the +following documents: + +@itemize @bullet +@item @cite{386 Programmer's Reference Manual, Intel, Order No. 230985-002}. + +@item @cite{386 Microprocessor Hardware Reference Manual, Intel, +Order No. 231732-003}. + +@item @cite{80386 System Software Writer's Guide, Intel, Order No. 231499-001}. + +@item @cite{80387 Programmer's Reference Manual, Intel, Order No. 231917-001}. +@end itemize + +It is highly recommended that the i386 RTEMS +application developer obtain and become familiar with Intel's +386 Programmer's Reference Manual. + diff --git a/doc/supplements/i386/timeFORCE386.t b/doc/supplements/i386/timeFORCE386.t new file mode 100644 index 0000000000..03362e3c88 --- /dev/null +++ b/doc/supplements/i386/timeFORCE386.t @@ -0,0 +1,135 @@ +@include ../common/timemac.texi +@tex +\global\advance \smallskipamount by -4pt +@end tex + +@ifinfo +@node i386 Timing Data, i386 Timing Data Introduction, Memory Requirements RTEMS RAM Workspace Worksheet, Top +@end ifinfo +@chapter i386 Timing Data +@ifinfo +@menu +* i386 Timing Data Introduction:: +* i386 Timing Data Hardware Platform:: +* i386 Timing Data Interrupt Latency:: +* i386 Timing Data Context Switch:: +* i386 Timing Data Directive Times:: +* i386 Timing Data Task Manager:: +* i386 Timing Data Interrupt Manager:: +* i386 Timing Data Clock Manager:: +* i386 Timing Data Timer Manager:: +* i386 Timing Data Semaphore Manager:: +* i386 Timing Data Message Manager:: +* i386 Timing Data Event Manager:: +* i386 Timing Data Signal Manager:: +* i386 Timing Data Partition Manager:: +* i386 Timing Data Region Manager:: +* i386 Timing Data Dual-Ported Memory Manager:: +* i386 Timing Data I/O Manager:: +* i386 Timing Data Rate Monotonic Manager:: +@end menu +@end ifinfo + +@ifinfo +@node i386 Timing Data Introduction, i386 Timing Data Hardware Platform, i386 Timing Data, i386 Timing Data +@end ifinfo +@section Introduction + +The timing data for the i386 version of RTEMS is +provided along with the target dependent aspects concerning the +gathering of the timing data. The hardware platform used to +gather the times is described to give the reader a better +understanding of each directive time provided. Also, provided +is a description of the interrupt latency and the context +switch times as they pertain to the i386 version of RTEMS. + +@ifinfo +@node i386 Timing Data Hardware Platform, i386 Timing Data Interrupt Latency, i386 Timing Data Introduction, i386 Timing Data +@end ifinfo +@section Hardware Platform + +All times reported except for the maximum period +interrupts are disabled by RTEMS were measured using a Force +Computers CPU386 board. The CPU386 is a 16 Mhz board with zero +wait state dynamic memory and an i80387 numeric coprocessor. +One of the count-down timers provided by a Motorola MC68901 was +used to measure elapsed time with one microsecond resolution. +All sources of hardware interrupts are disabled, although the +interrupt level of the i386 allows all interrupts. + +The maximum period interrupts are disabled was +measured by summing the number of CPU cycles required by each +assembly language instruction executed while interrupts were +disabled. Zero wait state memory was assumed. The total CPU +cycles executed with interrupts disabled, including the +instructions to disable and enable interrupts, was divided by 16 +to simulate a i386 executing at 16 Mhz. + +@ifinfo +@node i386 Timing Data Interrupt Latency, i386 Timing Data Context Switch, i386 Timing Data Hardware Platform, i386 Timing Data +@end ifinfo +@section Interrupt Latency + +The maximum period with interrupts disabled within +RTEMS is less than RTEMS_MAXIMUM_DISABLE_PERIOD microseconds +including the instructions +which disable and re-enable interrupts. The time required for +the i386 to generate an interrupt using the int instruction, +vectoring to an interrupt handler, and for the RTEMS entry +overhead before invoking the user's interrupt handler are a +total of 12 microseconds. These combine to yield a worst case +interrupt latency of less +RTEMS_MAXIMUM_DISABLE_PERIOD + RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK +microseconds. [NOTE: The +maximum period with interrupts disabled within RTEMS was last +calculated for Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.] + +It should be noted again that the maximum period with +interrupts disabled within RTEMS is hand-timed. The interrupt +vector and entry overhead time was generated on the Force +Computers CPU386 benchmark platform using the int instruction as +the interrupt source. + +@ifinfo +@node i386 Timing Data Context Switch, i386 Timing Data Directive Times, i386 Timing Data Interrupt Latency, i386 Timing Data +@end ifinfo +@section Context Switch + +The RTEMS processor context switch time is RTEMS_NO_FP_CONTEXTS +microseconds on the Force Computers CPU386 benchmark platform. +This time represents the raw context switch time with no user +extensions configured. Additional execution time is required +when a TASK_SWITCH user extension is configured. The use of the +TASK_SWITCH extension is application dependent. Thus, its +execution time is not considered part of the base context switch +time. + +Since RTEMS was designed specifically for embedded +missile applications which are floating point intensive, the +executive is optimized to avoid unnecessarily saving and +restoring the state of the numeric coprocessor. The state of +the numeric coprocessor is only saved when a FLOATING_POINT task +is dispatched and that task was not the last task to utilize the +coprocessor. In a system with only one FLOATING_POINT task, the +state of the numeric coprocessor will never be saved or +restored. When the first FLOATING_POINT task is dispatched, +RTEMS does not need to save the current state of the numeric +coprocessor. + +The exact amount of time required to save and restore +floating point context is dependent on the state of the numeric +coprocessor. RTEMS places the coprocessor in the initialized +state when a task is started or restarted. Once the task has +utilized the coprocessor, it is in the idle state when floating +point instructions are not executing and the busy state when +floating point instructions are executing. The state of the +coprocessor is task specific. + +The following table summarizes the context switch +times for the Force Computers CPU386 benchmark platform: + +@include timetbl.texi + +@tex +\global\advance \smallskipamount by 4pt +@end tex diff --git a/doc/supplements/i386/timedata.t b/doc/supplements/i386/timedata.t new file mode 100644 index 0000000000..03362e3c88 --- /dev/null +++ b/doc/supplements/i386/timedata.t @@ -0,0 +1,135 @@ +@include ../common/timemac.texi +@tex +\global\advance \smallskipamount by -4pt +@end tex + +@ifinfo +@node i386 Timing Data, i386 Timing Data Introduction, Memory Requirements RTEMS RAM Workspace Worksheet, Top +@end ifinfo +@chapter i386 Timing Data +@ifinfo +@menu +* i386 Timing Data Introduction:: +* i386 Timing Data Hardware Platform:: +* i386 Timing Data Interrupt Latency:: +* i386 Timing Data Context Switch:: +* i386 Timing Data Directive Times:: +* i386 Timing Data Task Manager:: +* i386 Timing Data Interrupt Manager:: +* i386 Timing Data Clock Manager:: +* i386 Timing Data Timer Manager:: +* i386 Timing Data Semaphore Manager:: +* i386 Timing Data Message Manager:: +* i386 Timing Data Event Manager:: +* i386 Timing Data Signal Manager:: +* i386 Timing Data Partition Manager:: +* i386 Timing Data Region Manager:: +* i386 Timing Data Dual-Ported Memory Manager:: +* i386 Timing Data I/O Manager:: +* i386 Timing Data Rate Monotonic Manager:: +@end menu +@end ifinfo + +@ifinfo +@node i386 Timing Data Introduction, i386 Timing Data Hardware Platform, i386 Timing Data, i386 Timing Data +@end ifinfo +@section Introduction + +The timing data for the i386 version of RTEMS is +provided along with the target dependent aspects concerning the +gathering of the timing data. The hardware platform used to +gather the times is described to give the reader a better +understanding of each directive time provided. Also, provided +is a description of the interrupt latency and the context +switch times as they pertain to the i386 version of RTEMS. + +@ifinfo +@node i386 Timing Data Hardware Platform, i386 Timing Data Interrupt Latency, i386 Timing Data Introduction, i386 Timing Data +@end ifinfo +@section Hardware Platform + +All times reported except for the maximum period +interrupts are disabled by RTEMS were measured using a Force +Computers CPU386 board. The CPU386 is a 16 Mhz board with zero +wait state dynamic memory and an i80387 numeric coprocessor. +One of the count-down timers provided by a Motorola MC68901 was +used to measure elapsed time with one microsecond resolution. +All sources of hardware interrupts are disabled, although the +interrupt level of the i386 allows all interrupts. + +The maximum period interrupts are disabled was +measured by summing the number of CPU cycles required by each +assembly language instruction executed while interrupts were +disabled. Zero wait state memory was assumed. The total CPU +cycles executed with interrupts disabled, including the +instructions to disable and enable interrupts, was divided by 16 +to simulate a i386 executing at 16 Mhz. + +@ifinfo +@node i386 Timing Data Interrupt Latency, i386 Timing Data Context Switch, i386 Timing Data Hardware Platform, i386 Timing Data +@end ifinfo +@section Interrupt Latency + +The maximum period with interrupts disabled within +RTEMS is less than RTEMS_MAXIMUM_DISABLE_PERIOD microseconds +including the instructions +which disable and re-enable interrupts. The time required for +the i386 to generate an interrupt using the int instruction, +vectoring to an interrupt handler, and for the RTEMS entry +overhead before invoking the user's interrupt handler are a +total of 12 microseconds. These combine to yield a worst case +interrupt latency of less +RTEMS_MAXIMUM_DISABLE_PERIOD + RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK +microseconds. [NOTE: The +maximum period with interrupts disabled within RTEMS was last +calculated for Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.] + +It should be noted again that the maximum period with +interrupts disabled within RTEMS is hand-timed. The interrupt +vector and entry overhead time was generated on the Force +Computers CPU386 benchmark platform using the int instruction as +the interrupt source. + +@ifinfo +@node i386 Timing Data Context Switch, i386 Timing Data Directive Times, i386 Timing Data Interrupt Latency, i386 Timing Data +@end ifinfo +@section Context Switch + +The RTEMS processor context switch time is RTEMS_NO_FP_CONTEXTS +microseconds on the Force Computers CPU386 benchmark platform. +This time represents the raw context switch time with no user +extensions configured. Additional execution time is required +when a TASK_SWITCH user extension is configured. The use of the +TASK_SWITCH extension is application dependent. Thus, its +execution time is not considered part of the base context switch +time. + +Since RTEMS was designed specifically for embedded +missile applications which are floating point intensive, the +executive is optimized to avoid unnecessarily saving and +restoring the state of the numeric coprocessor. The state of +the numeric coprocessor is only saved when a FLOATING_POINT task +is dispatched and that task was not the last task to utilize the +coprocessor. In a system with only one FLOATING_POINT task, the +state of the numeric coprocessor will never be saved or +restored. When the first FLOATING_POINT task is dispatched, +RTEMS does not need to save the current state of the numeric +coprocessor. + +The exact amount of time required to save and restore +floating point context is dependent on the state of the numeric +coprocessor. RTEMS places the coprocessor in the initialized +state when a task is started or restarted. Once the task has +utilized the coprocessor, it is in the idle state when floating +point instructions are not executing and the busy state when +floating point instructions are executing. The state of the +coprocessor is task specific. + +The following table summarizes the context switch +times for the Force Computers CPU386 benchmark platform: + +@include timetbl.texi + +@tex +\global\advance \smallskipamount by 4pt +@end tex |