diff options
Diffstat (limited to '')
-rw-r--r-- | doc/supplements/i386/cputable.texi | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/doc/supplements/i386/cputable.texi b/doc/supplements/i386/cputable.texi deleted file mode 100644 index 25ae4db63a..0000000000 --- a/doc/supplements/i386/cputable.texi +++ /dev/null @@ -1,136 +0,0 @@ -@c -@c COPYRIGHT (c) 1988-1998. -@c On-Line Applications Research Corporation (OAR). -@c All rights reserved. -@c -@c $Id$ -@c - -@ifinfo -@node Processor Dependent Information Table, Processor Dependent Information Table Introduction, Board Support Packages Processor Initialization, Top -@end ifinfo -@chapter Processor Dependent Information Table -@ifinfo -@menu -* Processor Dependent Information Table Introduction:: -* Processor Dependent Information Table CPU Dependent Information Table:: -@end menu -@end ifinfo - -@ifinfo -@node Processor Dependent Information Table Introduction, Processor Dependent Information Table CPU Dependent Information Table, Processor Dependent Information Table, Processor Dependent Information Table -@end ifinfo -@section Introduction - -Any highly processor dependent information required -to describe a processor to RTEMS is provided in the CPU -Dependent Information Table. This table is not required for all -processors supported by RTEMS. This chapter describes the -contents, if any, for a particular processor type. - -@ifinfo -@node Processor Dependent Information Table CPU Dependent Information Table, Memory Requirements, Processor Dependent Information Table Introduction, Processor Dependent Information Table -@end ifinfo -@section CPU Dependent Information Table - -The i386 version of the RTEMS CPU Dependent -Information Table contains the information required to interface -a Board Support Package and RTEMS on the i386. This information -is provided to allow RTEMS to interoperate effectively with the -BSP. The C structure definition is given here: - -@example -@group -typedef struct @{ - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - unsigned32 interrupt_segment; - void *interrupt_vector_table; -@} rtems_cpu_table; -@end group -@end example - -@table @code -@item pretasking_hook -is the address of the -user provided routine which is invoked once RTEMS initialization -is complete but before interrupts and tasking are enabled. This -field may be NULL to indicate that the hook is not utilized. - -@item predriver_hook -is the address of the user provided -routine which is invoked with tasking enabled immediately before -the MPCI and device drivers are initialized. RTEMS -initialization is complete, interrupts and tasking are enabled, -but no device drivers are initialized. This field may be NULL to -indicate that the hook is not utilized. - -@item postdriver_hook -is the address of the user provided -routine which is invoked with tasking enabled immediately after -the MPCI and device drivers are initialized. RTEMS -initialization is complete, interrupts and tasking are enabled, -and the device drivers are initialized. This field may be NULL -to indicate that the hook is not utilized. - -@item idle_task -is the address of the optional user -provided routine which is used as the system's IDLE task. If -this field is not NULL, then the RTEMS default IDLE task is not -used. This field may be NULL to indicate that the default IDLE -is to be used. - -@item do_zero_of_workspace -indicates whether RTEMS should -zero the Workspace as part of its initialization. If set to -TRUE, the Workspace is zeroed. Otherwise, it is not. - -@item idle_task_stack_size -is the size of the RTEMS idle task stack in bytes. -If this number is less than MINIMUM_STACK_SIZE, then the -idle task's stack will be MINIMUM_STACK_SIZE in byte. - -@item interrupt_stack_size -is the size of the RTEMS -allocated interrupt stack in bytes. This value must be at least -as large as MINIMUM_STACK_SIZE. - -@item extra_mpci_receive_server_stack -is the extra stack space allocated for the RTEMS MPCI receive server task -in bytes. The MPCI receive server may invoke nearly all directives and -may require extra stack space on some targets. - -@item stack_allocate_hook -is the address of the optional user provided routine which allocates -memory for task stacks. If this hook is not NULL, then a stack_free_hook -must be provided as well. - -@item stack_free_hook -is the address of the optional user provided routine which frees -memory for task stacks. If this hook is not NULL, then a stack_allocate_hook -must be provided as well. - -@item interrupt_segment -is the value of the selector which should be placed in a segment -register to access the Interrupt Descriptor Table. - -@item interrupt_vector_table -is the base address of the Interrupt Descriptor Table relative to the -interrupt_segment. - -@end table - -The contents of the i386 Interrupt Descriptor Table -are discussed in Intel's i386 User's Manual. Structure -definitions for the i386 IDT is provided by including the file -rtems.h. - |