diff options
Diffstat (limited to 'cpukit/score/cpu/mips/rtems/asm.h')
-rw-r--r-- | cpukit/score/cpu/mips/rtems/asm.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/cpukit/score/cpu/mips/rtems/asm.h b/cpukit/score/cpu/mips/rtems/asm.h new file mode 100644 index 0000000000..0ef10f8baa --- /dev/null +++ b/cpukit/score/cpu/mips/rtems/asm.h @@ -0,0 +1,159 @@ +/** + * @file rtems/asm.h + * + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. + */ + +/* + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. + * + * COPYRIGHT: + * + * This file is based on similar code found in newlib available + * from ftp.cygnus.com. The file which was used had no copyright + * notice. This file is freely distributable as long as the source + * of the file is noted. This file is: + * + * COPYRIGHT (c) 1994-1997. + * On-Line Applications Research Corporation (OAR). + * + * $Id$ + */ +/* @(#)asm.h 03/15/96 1.1 */ + +#ifndef _RTEMS_ASM_H +#define _RTEMS_ASM_H + +/* + * Indicate we are in an assembly file and get the basic CPU definitions. + */ + +#ifndef ASM +#define ASM +#endif +#include <rtems/system.h> +#include <rtems/score/cpuopts.h> +#include <rtems/score/mips.h> + +/* + * Recent versions of GNU cpp define variables which indicate the + * need for underscores and percents. If not using GNU cpp or + * the version does not support this, then you will obviously + * have to define these as appropriate. + */ + +#ifndef __USER_LABEL_PREFIX__ +#define __USER_LABEL_PREFIX__ _ +#endif + +#ifndef __REGISTER_PREFIX__ +#define __REGISTER_PREFIX__ +#endif + +#include <rtems/concat.h> + +/* Use the right prefix for global labels. */ + +#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) + +/* Use the right prefix for registers. */ + +#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) + +/* + * define macros for all of the registers on this CPU + * + * EXAMPLE: #define d0 REG (d0) + */ + +/* + * Define macros to handle section beginning and ends. + */ + + +#define BEGIN_CODE_DCL .text +#define END_CODE_DCL +#define BEGIN_DATA_DCL .data +#define END_DATA_DCL +#define BEGIN_CODE .text +#define END_CODE +#define BEGIN_DATA +#define END_DATA +#define BEGIN_BSS +#define END_BSS +#define END + +/* + * Following must be tailor for a particular flavor of the C compiler. + * They may need to put underscores in front of the symbols. + */ + +#define PUBLIC(sym) .globl SYM (sym) +#define EXTERN(sym) .globl SYM (sym) + +/* + * Debugger macros for assembly language routines. Allows the + * programmer to set up the necessary stack frame info + * required by debuggers to do stack traces. + */ + +#ifndef XDS +#define FRAME(name,frm_reg,offset,ret_reg) \ + .globl name; \ + .ent name; \ +name:; \ + .frame frm_reg,offset,ret_reg +#define ENDFRAME(name) \ + .end name +#else +#define FRAME(name,frm_reg,offset,ret_reg) \ + .globl _##name;\ +_##name: +#define ENDFRAME(name) +#endif /* XDS */ + +/* + * Hardware Floating Point Registers + */ + +#define R_FP0 0 +#define R_FP1 1 +#define R_FP2 2 +#define R_FP3 3 +#define R_FP4 4 +#define R_FP5 5 +#define R_FP6 6 +#define R_FP7 7 +#define R_FP8 8 +#define R_FP9 9 +#define R_FP10 10 +#define R_FP11 11 +#define R_FP12 12 +#define R_FP13 13 +#define R_FP14 14 +#define R_FP15 15 +#define R_FP16 16 +#define R_FP17 17 +#define R_FP18 18 +#define R_FP19 19 +#define R_FP20 20 +#define R_FP21 21 +#define R_FP22 22 +#define R_FP23 23 +#define R_FP24 24 +#define R_FP25 25 +#define R_FP26 26 +#define R_FP27 27 +#define R_FP28 28 +#define R_FP29 29 +#define R_FP30 30 +#define R_FP31 31 + +#endif +/* end of include file */ + |