summaryrefslogtreecommitdiffstats
path: root/cpukit/score/cpu/m68k/rtems/m68k/m68302.h
diff options
context:
space:
mode:
Diffstat (limited to 'cpukit/score/cpu/m68k/rtems/m68k/m68302.h')
-rw-r--r--cpukit/score/cpu/m68k/rtems/m68k/m68302.h661
1 files changed, 0 insertions, 661 deletions
diff --git a/cpukit/score/cpu/m68k/rtems/m68k/m68302.h b/cpukit/score/cpu/m68k/rtems/m68k/m68302.h
deleted file mode 100644
index 084ceac034..0000000000
--- a/cpukit/score/cpu/m68k/rtems/m68k/m68302.h
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- *------------------------------------------------------------------
- *
- * m68302.h - Definitions for Motorola MC68302 processor.
- *
- * Section references in this file refer to revision 2 of Motorola's
- * "MC68302 Integrated Multiprotocol Processor User's Manual".
- * (Motorola document MC68302UM/AD REV 2.)
- *
- * Based on Don Meyer's cpu68302.h that was posted in comp.sys.m68k
- * on 17 February, 1993.
- *
- * Copyright 1995 David W. Glessner.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the following conditions are met:
- * 1. Redistribution of source code and documentation must retain
- * the above copyright notice, this list of conditions and the
- * following disclaimer.
- * 2. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * This software is provided "AS IS" without warranty of any kind,
- * either expressed or implied, including, but not limited to, the
- * implied warranties of merchantability, title and fitness for a
- * particular purpose.
- *
- *
- * $Id$
- *
- *------------------------------------------------------------------
- */
-
-#ifndef __MOTOROLA_MC68302_DEFINITIONS_h
-#define __MOTOROLA_MC68302_DEFINITIONS_h
-
-/*
- * BAR - Base Address Register
- * Section 2.7
- */
-#define M302_BAR (*((volatile rtems_unsigned16 *) 0xf2))
-
-/*
- * SCR - System Control Register
- * Section 3.8.1
- */
-#define M302_SCR (*((volatile rtems_unsigned32 *) 0xf4))
-/*
- * SCR bits
- */
-#define RBIT_SCR_IPA 0x08000000
-#define RBIT_SCR_HWT 0x04000000
-#define RBIT_SCR_WPV 0x02000000
-#define RBIT_SCR_ADC 0x01000000
-
-#define RBIT_SCR_ERRE 0x00400000
-#define RBIT_SCR_VGE 0x00200000
-#define RBIT_SCR_WPVE 0x00100000
-#define RBIT_SCR_RMCST 0x00080000
-#define RBIT_SCR_EMWS 0x00040000
-#define RBIT_SCR_ADCE 0x00020000
-#define RBIT_SCR_BCLM 0x00010000
-
-#define RBIT_SCR_FRZW 0x00008000
-#define RBIT_SCR_FRZ2 0x00004000
-#define RBIT_SCR_FRZ1 0x00002000
-#define RBIT_SCR_SAM 0x00001000
-#define RBIT_SCR_HWDEN 0x00000800
-#define RBIT_SCR_HWDCN2 0x00000400
-#define RBIT_SCR_HWDCN1 0x00000200 /* 512 clocks */
-#define RBIT_SCR_HWDCN0 0x00000100 /* 128 clocks */
-
-#define RBIT_SCR_LPREC 0x00000080
-#define RBIT_SCR_LPP16 0x00000040
-#define RBIT_SCR_LPEN 0x00000020
-#define RBIT_SCR_LPCLKDIV 0x0000001f
-
-
-/*
- * 68000 interrupt and trap vector numbers
- */
-#define M68K_IVEC_BUS_ERROR 2
-#define M68K_IVEC_ADDRESS_ERROR 3
-#define M68K_IVEC_ILLEGAL_OPCODE 4
-#define M68K_IVEC_ZERO_DIVIDE 5
-#define M68K_IVEC_CHK 6
-#define M68K_IVEC_TRAPV 7
-#define M68K_IVEC_PRIVILEGE 8
-#define M68K_IVEC_TRACE 9
-#define M68K_IVEC_LINE_A 10
-#define M68K_IVEC_LINE_F 11
-/* Unassigned, Reserved 12-14 */
-#define M68K_IVEC_UNINITIALIZED_INT 15
-/* Unassigned, Reserved 16-23 */
-#define M68K_IVEC_SPURIOUS_INT 24
-
-#define M68K_IVEC_LEVEL1_AUTOVECTOR 25
-#define M68K_IVEC_LEVEL2_AUTOVECTOR 26
-#define M68K_IVEC_LEVEL3_AUTOVECTOR 27
-#define M68K_IVEC_LEVEL4_AUTOVECTOR 28
-#define M68K_IVEC_LEVEL5_AUTOVECTOR 29
-#define M68K_IVEC_LEVEL6_AUTOVECTOR 30
-#define M68K_IVEC_LEVEL7_AUTOVECTOR 31
-
-#define M68K_IVEC_TRAP0 32
-#define M68K_IVEC_TRAP1 33
-#define M68K_IVEC_TRAP2 34
-#define M68K_IVEC_TRAP3 35
-#define M68K_IVEC_TRAP4 36
-#define M68K_IVEC_TRAP5 37
-#define M68K_IVEC_TRAP6 38
-#define M68K_IVEC_TRAP7 39
-#define M68K_IVEC_TRAP8 40
-#define M68K_IVEC_TRAP9 41
-#define M68K_IVEC_TRAP10 42
-#define M68K_IVEC_TRAP11 43
-#define M68K_IVEC_TRAP12 44
-#define M68K_IVEC_TRAP13 45
-#define M68K_IVEC_TRAP14 46
-#define M68K_IVEC_TRAP15 47
-/*
- * Unassigned, Reserved 48-59
- *
- * Note: Vectors 60-63 are used by the MC68302 (e.g. BAR, SCR).
- */
-
-/*
- * MC68302 Interrupt Vectors
- * Section 3.2
- */
-enum m68302_ivec_e {
- M302_IVEC_ERR =0,
- M302_IVEC_PB8 =1, /* General-Purpose Interrupt 0 */
- M302_IVEC_SMC2 =2,
- M302_IVEC_SMC1 =3,
- M302_IVEC_TIMER3 =4,
- M302_IVEC_SCP =5,
- M302_IVEC_TIMER2 =6,
- M302_IVEC_PB9 =7, /* General-Purpose Interrupt 1 */
- M302_IVEC_SCC3 =8,
- M302_IVEC_TIMER1 =9,
- M302_IVEC_SCC2 =10,
- M302_IVEC_IDMA =11,
- M302_IVEC_SDMA =12, /* SDMA Channels Bus Error */
- M302_IVEC_SCC1 =13,
- M302_IVEC_PB10 =14, /* General-Purpose Interrupt 2 */
- M302_IVEC_PB11 =15, /* General-Purpose Interrupt 3 */
- M302_IVEC_IRQ1 =17, /* External Device */
- M302_IVEC_IRQ6 =22, /* External Device */
- M302_IVEC_IRQ7 =23 /* External Device */
-};
-
-
-/*
- * GIMR - Global Interrupt Mode Register
- * Section 3.2.5.1
- */
-#define RBIT_GIMR_MOD (1<<15)
-#define RBIT_GIMR_IV7 (1<<14)
-#define RBIT_GIMR_IV6 (1<<13)
-#define RBIT_GIMR_IV1 (1<<12)
-#define RBIT_GIMR_ET7 (1<<10)
-#define RBIT_GIMR_ET6 (1<<9)
-#define RBIT_GIMR_ET1 (1<<8)
-#define RBIT_GIMR_VECTOR (7<<5)
-
-/*
- * IPR - Interrupt Pending Register (Section 3.2.5.2)
- * IMR - Interrupt Mask Register (Section 3.2.5.3)
- * ISR - Interrupt In-Service Register (Section 3.2.5.4)
- */
-#define RBIT_IPR_PB11 (1<<15)
-#define RBIT_IPR_PB10 (1<<14)
-#define RBIT_IPR_SCC1 (1<<13)
-#define RBIT_IPR_SDMA (1<<12)
-#define RBIT_IPR_IDMA (1<<11)
-#define RBIT_IPR_SCC2 (1<<10)
-#define RBIT_IPR_TIMER1 (1<<9)
-#define RBIT_IPR_SCC3 (1<<8)
-#define RBIT_IPR_PB9 (1<<7)
-#define RBIT_IPR_TIMER2 (1<<6)
-#define RBIT_IPR_SCP (1<<5)
-#define RBIT_IPR_TIMER3 (1<<4)
-#define RBIT_IPR_SMC1 (1<<3)
-#define RBIT_IPR_SMC2 (1<<2)
-#define RBIT_IPR_PB8 (1<<1)
-#define RBIT_IPR_ERR (1<<0)
-
-#define RBIT_ISR_PB11 (1<<15)
-#define RBIT_ISR_PB10 (1<<14)
-#define RBIT_ISR_SCC1 (1<<13)
-#define RBIT_ISR_SDMA (1<<12)
-#define RBIT_ISR_IDMA (1<<11)
-#define RBIT_ISR_SCC2 (1<<10)
-#define RBIT_ISR_TIMER1 (1<<9)
-#define RBIT_ISR_SCC3 (1<<8)
-#define RBIT_ISR_PB9 (1<<7)
-#define RBIT_ISR_TIMER2 (1<<6)
-#define RBIT_ISR_SCP (1<<5)
-#define RBIT_ISR_TIMER3 (1<<4)
-#define RBIT_ISR_SMC1 (1<<3)
-#define RBIT_ISR_SMC2 (1<<2)
-#define RBIT_ISR_PB8 (1<<1)
-
-#define RBIT_IMR_PB11 (1<<15) /* PB11 Interrupt Mask */
-#define RBIT_IMR_PB10 (1<<14) /* PB10 Interrupt Mask */
-#define RBIT_IMR_SCC1 (1<<13) /* SCC1 Interrupt Mask */
-#define RBIT_IMR_SDMA (1<<12) /* SDMA Interrupt Mask */
-#define RBIT_IMR_IDMA (1<<11) /* IDMA Interrupt Mask */
-#define RBIT_IMR_SCC2 (1<<10) /* SCC2 Interrupt Mask */
-#define RBIT_IMR_TIMER1 (1<<9) /* TIMER1 Interrupt Mask */
-#define RBIT_IMR_SCC3 (1<<8) /* SCC3 Interrupt Mask */
-#define RBIT_IMR_PB9 (1<<7) /* PB9 Interrupt Mask */
-#define RBIT_IMR_TIMER2 (1<<6) /* TIMER2 Interrupt Mask */
-#define RBIT_IMR_SCP (1<<5) /* SCP Interrupt Mask */
-#define RBIT_IMR_TIMER3 (1<<4) /* TIMER3 Interrupt Mask */
-#define RBIT_IMR_SMC1 (1<<3) /* SMC1 Interrupt Mask */
-#define RBIT_IMR_SMC2 (1<<2) /* SMC2 Interrupt Mask */
-#define RBIT_IMR_PB8 (1<<1) /* PB8 Interrupt Mask */
-
-
-/*
- * DRAM Refresh
- * Section 3.9
- *
- * The DRAM refresh memory map replaces the SCC2 Tx BD 6 and Tx BD 7
- * structures in the parameter RAM.
- *
- * Access to the DRAM registers can be accomplished by
- * the following approach:
- *
- * volatile m302_DRAM_refresh_t *dram;
- * dram = (volatile m302_DRAM_refresh_t *) &m302.scc2.bd.tx[6];
- *
- * Then simply use pointer references (e.g. dram->count = 3).
- */
-typedef struct {
- rtems_unsigned16 dram_high; /* DRAM high address and FC */
- rtems_unsigned16 dram_low; /* DRAM low address */
- rtems_unsigned16 increment; /* increment step (bytes/row) */
- rtems_unsigned16 count; /* RAM refresh cycle count (#rows) */
- rtems_unsigned16 t_ptr_h; /* temporary refresh high addr & FC */
- rtems_unsigned16 t_ptr_l; /* temporary refresh low address */
- rtems_unsigned16 t_count; /* temporary refresh cycles count */
- rtems_unsigned16 res; /* reserved */
-} m302_DRAM_refresh_t;
-
-
-/*
- * TMR - Timer Mode Register (for timers 1 and 2)
- * Section 3.5.2.1
- */
-#define RBIT_TMR_ICLK_STOP (0<<1)
-#define RBIT_TMR_ICLK_MASTER (1<<1)
-#define RBIT_TMR_ICLK_MASTER16 (2<<1)
-#define RBIT_TMR_ICLK_TIN (3<<1)
-
-#define RBIT_TMR_OM (1<<5)
-#define RBIT_TMR_ORI (1<<4)
-#define RBIT_TMR_FRR (1<<3)
-#define RBIT_TMR_RST (1<<0)
-
-
-/*
- * TER - Timer Event Register (for timers 1 and 2)
- * Section 3.5.2.5
- */
-#define RBIT_TER_REF (1<<1) /* Output Reference Event */
-#define RBIT_TER_CAP (1<<0) /* Capture Event */
-
-
-/*
- * SCC Buffer Descriptors and Buffer Descriptors Table
- * Section 4.5.5
- */
-typedef struct m302_SCC_bd {
- rtems_unsigned16 status; /* status and control */
- rtems_unsigned16 length; /* data length */
- rtems_unsigned8 *buffer; /* data buffer pointer */
-} m302_SCC_bd_t;
-
-typedef struct {
- m302_SCC_bd_t rx[8]; /* receive buffer descriptors */
- m302_SCC_bd_t tx[8]; /* transmit buffer descriptors */
-} m302_SCC_bd_table_t;
-
-
-/*
- * SCC Parameter RAM (offset 0x080 from an SCC Base)
- * Section 4.5.6
- *
- * Each SCC parameter RAM area begins at offset 0x80 from each SCC base
- * area (0x400, 0x500, or 0x600 from the dual-port RAM base).
- *
- * Offsets 0x9c-0xbf from each SCC base area compose the protocol-specific
- * portion of the SCC parameter RAM.
- */
-typedef struct {
- rtems_unsigned8 rfcr; /* Rx Function Code */
- rtems_unsigned8 tfcr; /* Tx Function Code */
- rtems_unsigned16 mrblr; /* Maximum Rx Buffer Length */
- rtems_unsigned16 _rstate; /* Rx Internal State */
- rtems_unsigned8 res2;
- rtems_unsigned8 rbd; /* Rx Internal Buffer Number */
- rtems_unsigned32 _rdptr; /* Rx Internal Data Pointer */
- rtems_unsigned16 _rcount; /* Rx Internal Byte Count */
- rtems_unsigned16 _rtmp; /* Rx Temp */
- rtems_unsigned16 _tstate; /* Tx Internal State */
- rtems_unsigned8 res7;
- rtems_unsigned8 tbd; /* Tx Internal Buffer Number */
- rtems_unsigned32 _tdptr; /* Tx Internal Data Pointer */
- rtems_unsigned16 _tcount; /* Tx Internal Byte Count */
- rtems_unsigned16 _ttmp; /* Tx Temp */
-} m302_SCC_parameters_t;
-
-/*
- * UART-Specific SCC Parameter RAM
- * Section 4.5.11.3
- */
-typedef struct {
- rtems_unsigned16 max_idl; /* Maximum IDLE Characters (rx) */
- rtems_unsigned16 idlc; /* Temporary rx IDLE counter */
- rtems_unsigned16 brkcr; /* Break Count Register (tx) */
- rtems_unsigned16 parec; /* Receive Parity Error Counter */
- rtems_unsigned16 frmec; /* Receive Framing Error Counter */
- rtems_unsigned16 nosec; /* Receive Noise Counter */
- rtems_unsigned16 brkec; /* Receive Break Condition Counter */
- rtems_unsigned16 uaddr1; /* UART ADDRESS Character 1 */
- rtems_unsigned16 uaddr2; /* UART ADDRESS Character 2 */
- rtems_unsigned16 rccr; /* Receive Control Character Register */
- rtems_unsigned16 character[8]; /* Control Characters 1 through 8*/
-} m302_SCC_UartSpecific_t;
-/*
- * This definition allows for the checking of receive buffers
- * for errors.
- */
-
-#define RCV_ERR 0x003F
-
-/*
- * UART receive buffer descriptor bit definitions.
- * Section 4.5.11.14
- */
-#define RBIT_UART_CTRL (1<<11) /* buffer contains a control char */
-#define RBIT_UART_ADDR (1<<10) /* first byte contains an address */
-#define RBIT_UART_MATCH (1<<9) /* indicates which addr char matched */
-#define RBIT_UART_IDLE (1<<8) /* buffer closed due to IDLE sequence */
-#define RBIT_UART_BR (1<<5) /* break sequence was received */
-#define RBIT_UART_FR (1<<4) /* framing error was received */
-#define RBIT_UART_PR (1<<3) /* parity error was received */
-#define RBIT_UART_OV (1<<1) /* receiver overrun occurred */
-#define RBIT_UART_CD (1<<0) /* carrier detect lost */
-#define RBIT_UART_STATUS 0x003B /* all status bits */
-
-/*
- * UART transmit buffer descriptor bit definitions.
- * Section 4.5.11.15
- */
-#define RBIT_UART_CR (1<<11) /* clear-to-send report
- * this results in two idle bits
- * between back-to-back frames
- */
-#define RBIT_UART_A (1<<10) /* buffer contains address characters
- * only valid in multidrop mode (UM0=1)
- */
-#define RBIT_UART_PREAMBLE (1<<9) /* send preamble before data */
-#define RBIT_UART_CTS_LOST (1<<0) /* CTS lost */
-
-/*
- * UART event register
- * Section 4.5.11.16
- */
-#define M302_UART_EV_CTS (1<<7) /* CTS status changed */
-#define M302_UART_EV_CD (1<<6) /* carrier detect status changed */
-#define M302_UART_EV_IDL (1<<5) /* IDLE sequence status changed */
-#define M302_UART_EV_BRK (1<<4) /* break character was received */
-#define M302_UART_EV_CCR (1<<3) /* control character received */
-#define M302_UART_EV_TX (1<<1) /* buffer has been transmitted */
-#define M302_UART_EV_RX (1<<0) /* buffer has been received */
-
-
-/*
- * HDLC-Specific SCC Parameter RAM
- * Section 4.5.12.3
- *
- * c_mask_l should be 0xF0B8 for 16-bit CRC, 0xdebb for 32-bit CRC
- * c_mask_h is a don't care for 16-bit CRC, 0x20E2 for 32-bit CRC
- */
-typedef struct {
- rtems_unsigned16 rcrc_l; /* Temp Receive CRC Low */
- rtems_unsigned16 rcrc_h; /* Temp Receive CRC High */
- rtems_unsigned16 c_mask_l; /* CRC Mask Low */
- rtems_unsigned16 c_mask_h; /* CRC Mask High */
- rtems_unsigned16 tcrc_l; /* Temp Transmit CRC Low */
- rtems_unsigned16 tcrc_h; /* Temp Transmit CRC High */
-
- rtems_unsigned16 disfc; /* Discard Frame Counter */
- rtems_unsigned16 crcec; /* CRC Error Counter */
- rtems_unsigned16 abtsc; /* Abort Sequence Counter */
- rtems_unsigned16 nmarc; /* Nonmatching Address Received Cntr */
- rtems_unsigned16 retrc; /* Frame Retransmission Counter */
-
- rtems_unsigned16 mflr; /* Maximum Frame Length Register */
- rtems_unsigned16 max_cnt; /* Maximum_Length Counter */
-
- rtems_unsigned16 hmask; /* User Defined Frame Address Mask */
- rtems_unsigned16 haddr1; /* User Defined Frame Address */
- rtems_unsigned16 haddr2; /* " */
- rtems_unsigned16 haddr3; /* " */
- rtems_unsigned16 haddr4; /* " */
-} m302_SCC_HdlcSpecific_t;
-/*
- * HDLC receiver buffer descriptor bit definitions
- * Section 4.5.12.10
- */
-#define RBIT_HDLC_EMPTY_BIT 0x8000 /* buffer associated with BD is empty */
-#define RBIT_HDLC_LAST_BIT 0x0800 /* buffer is last in a frame */
-#define RBIT_HDLC_FIRST_BIT 0x0400 /* buffer is first in a frame */
-#define RBIT_HDLC_FRAME_LEN 0x0020 /* receiver frame length violation */
-#define RBIT_HDLC_NONOCT_Rx 0x0010 /* received non-octet aligned frame */
-#define RBIT_HDLC_ABORT_SEQ 0x0008 /* received abort sequence */
-#define RBIT_HDLC_CRC_ERROR 0x0004 /* frame contains a CRC error */
-#define RBIT_HDLC_OVERRUN 0x0002 /* receiver overrun occurred */
-#define RBIT_HDLC_CD_LOST 0x0001 /* carrier detect lost */
-
-/*
- * HDLC transmit buffer descriptor bit definitions
- * Section 4.5.12.11
- */
-#define RBIT_HDLC_READY_BIT 0x8000 /* buffer is ready to transmit */
-#define RBIT_HDLC_EXT_BUFFER 0x4000 /* buffer is in external memory */
-#define RBIT_HDLC_WRAP_BIT 0x2000 /* last buffer in bd table, so wrap */
-#define RBIT_HDLC_WAKE_UP 0x1000 /* interrupt when buffer serviced */
-#define RBIT_HDLC_LAST_BIT 0x0800 /* buffer is last in the frame */
-#define RBIT_HDLC_TxCRC_BIT 0x0400 /* transmit a CRC sequence */
-#define RBIT_HDLC_UNDERRUN 0x0002 /* transmitter underrun */
-#define RBIT_HDLC_CTS_LOST 0x0001 /* CTS lost */
-
-/*
- * HDLC event register bit definitions
- * Section 4.5.12.12
- */
-#define RBIT_HDLC_CTS 0x80 /* CTS status changed */
-#define RBIT_HDLC_CD 0x40 /* carrier detect status changed */
-#define RBIT_HDLC_IDL 0x20 /* IDLE sequence status changed */
-#define RBIT_HDLC_TXE 0x10 /* transmit error */
-#define RBIT_HDLC_RXF 0x08 /* received frame */
-#define RBIT_HDLC_BSY 0x04 /* frame rcvd and discarded due to
- * lack of buffers
- */
-#define RBIT_HDLC_TXB 0x02 /* buffer has been transmitted */
-#define RBIT_HDLC_RXB 0x01 /* received buffer */
-
-
-
-typedef struct {
- m302_SCC_bd_table_t bd; /* +000 Buffer Descriptor Table */
- m302_SCC_parameters_t parm; /* +080 Common Parameter RAM */
- union { /* +09C Protocol-Specific Parm RAM */
- m302_SCC_UartSpecific_t uart;
- m302_SCC_HdlcSpecific_t hdlc;
- } prot;
- rtems_unsigned8 res[0x040]; /* +0C0 reserved, (not implemented) */
-} m302_SCC_t;
-
-
-/*
- * Common SCC Registers
- */
-typedef struct {
- rtems_unsigned16 res1;
- rtems_unsigned16 scon; /* SCC Configuration Register 4.5.2 */
- rtems_unsigned16 scm; /* SCC Mode Register 4.5.3 */
- rtems_unsigned16 dsr; /* SCC Data Synchronization Register 4.5.4 */
- rtems_unsigned8 scce; /* SCC Event Register 4.5.8.1 */
- rtems_unsigned8 res2;
- rtems_unsigned8 sccm; /* SCC Mask Register 4.5.8.2 */
- rtems_unsigned8 res3;
- rtems_unsigned8 sccs; /* SCC Status Register 4.5.8.3 */
- rtems_unsigned8 res4;
- rtems_unsigned16 res5;
-} m302_SCC_Registers_t;
-
-/*
- * SCON - SCC Configuration Register
- * Section 4.5.2
- */
-#define RBIT_SCON_WOMS (1<<15) /* Wired-OR Mode Select (NMSI mode only)
- * When set, the TXD driver is an
- * open-drain output */
-#define RBIT_SCON_EXTC (1<<14) /* External Clock Source */
-#define RBIT_SCON_TCS (1<<13) /* Transmit Clock Source */
-#define RBIT_SCON_RCS (1<<12) /* Receive Clock Source */
-
-/*
- * SCM - SCC Mode Register bit definitions
- * Section 4.5.3
- * The parameter-specific mode bits occupy bits 15 through 6.
- */
-#define RBIT_SCM_ENR (1<<3) /* Enable receiver */
-#define RBIT_SCM_ENT (1<<2) /* Enable transmitter */
-
-
-/*
- * Internal MC68302 Registers
- * starts at offset 0x800 from dual-port RAM base
- * Section 2.8
- */
-typedef struct {
- /* offset +800 */
- rtems_unsigned16 res0;
- rtems_unsigned16 cmr; /* IDMA Channel Mode Register */
- rtems_unsigned32 sapr; /* IDMA Source Address Pointer */
- rtems_unsigned32 dapr; /* IDMA Destination Address Pointer */
- rtems_unsigned16 bcr; /* IDMA Byte Count Register */
- rtems_unsigned8 csr; /* IDMA Channel Status Register */
- rtems_unsigned8 res1;
- rtems_unsigned8 fcr; /* IDMA Function Code Register */
- rtems_unsigned8 res2;
-
- /* offset +812 */
- rtems_unsigned16 gimr; /* Global Interrupt Mode Register */
- rtems_unsigned16 ipr; /* Interrupt Pending Register */
- rtems_unsigned16 imr; /* Interrupt Mask Register */
- rtems_unsigned16 isr; /* Interrupt In-Service Register */
- rtems_unsigned16 res3;
- rtems_unsigned16 res4;
-
- /* offset +81e */
- rtems_unsigned16 pacnt; /* Port A Control Register */
- rtems_unsigned16 paddr; /* Port A Data Direction Register */
- rtems_unsigned16 padat; /* Port A Data Register */
- rtems_unsigned16 pbcnt; /* Port B Control Register */
- rtems_unsigned16 pbddr; /* Port B Data Direction Register */
- rtems_unsigned16 pbdat; /* Port B Data Register */
- rtems_unsigned16 res5;
-
- /* offset +82c */
- rtems_unsigned16 res6;
- rtems_unsigned16 res7;
-
- rtems_unsigned16 br0; /* Base Register (CS0) */
- rtems_unsigned16 or0; /* Option Register (CS0) */
- rtems_unsigned16 br1; /* Base Register (CS1) */
- rtems_unsigned16 or1; /* Option Register (CS1) */
- rtems_unsigned16 br2; /* Base Register (CS2) */
- rtems_unsigned16 or2; /* Option Register (CS2) */
- rtems_unsigned16 br3; /* Base Register (CS3) */
- rtems_unsigned16 or3; /* Option Register (CS3) */
-
- /* offset +840 */
- rtems_unsigned16 tmr1; /* Timer Unit 1 Mode Register */
- rtems_unsigned16 trr1; /* Timer Unit 1 Reference Register */
- rtems_unsigned16 tcr1; /* Timer Unit 1 Capture Register */
- rtems_unsigned16 tcn1; /* Timer Unit 1 Counter */
- rtems_unsigned8 res8;
- rtems_unsigned8 ter1; /* Timer Unit 1 Event Register */
- rtems_unsigned16 wrr; /* Watchdog Reference Register */
- rtems_unsigned16 wcn; /* Watchdog Counter */
- rtems_unsigned16 res9;
- rtems_unsigned16 tmr2; /* Timer Unit 2 Mode Register */
- rtems_unsigned16 trr2; /* Timer Unit 2 Reference Register */
- rtems_unsigned16 tcr2; /* Timer Unit 2 Capture Register */
- rtems_unsigned16 tcn2; /* Timer Unit 2 Counter */
- rtems_unsigned8 resa;
- rtems_unsigned8 ter2; /* Timer Unit 2 Event Register */
- rtems_unsigned16 resb;
- rtems_unsigned16 resc;
- rtems_unsigned16 resd;
-
- /* offset +860 */
- rtems_unsigned8 cr; /* Command Register */
- rtems_unsigned8 rese[0x1f];
-
- /* offset +880, +890, +8a0 */
- m302_SCC_Registers_t scc[3]; /* SCC1, SCC2, SCC3 Registers */
-
- /* offset +8b0 */
- rtems_unsigned16 spmode; /* SCP,SMC Mode and Clock Cntrl Reg */
- rtems_unsigned16 simask; /* Serial Interface Mask Register */
- rtems_unsigned16 simode; /* Serial Interface Mode Register */
-} m302_internalReg_t ;
-
-
-/*
- * MC68302 dual-port RAM structure.
- * (Includes System RAM, Parameter RAM, and Internal Registers).
- * Section 2.8
- */
-typedef struct {
- rtems_unsigned8 mem[0x240]; /* +000 User Data Memory */
- rtems_unsigned8 res1[0x1c0]; /* +240 reserved, (not implemented) */
- m302_SCC_t scc1; /* +400 SCC1 */
- m302_SCC_t scc2; /* +500 SCC2 */
- m302_SCC_t scc3; /* +600 SCC3 */
- rtems_unsigned8 res2[0x100]; /* +700 reserved, (not implemented) */
- m302_internalReg_t reg; /* +800 68302 Internal Registers */
-} m302_dualPortRAM_t;
-
-/* some useful defines the some of the registers above */
-
-
-/* ----
- MC68302 Chip Select Registers
- p3-46 2nd Edition
-
- */
-#define BR_ENABLED 1
-#define BR_DISABLED 0
-#define BR_FC_NULL 0
-#define BR_READ_ONLY 0
-#define BR_READ_WRITE 2
-#define OR_DTACK_0 0x0000
-#define OR_DTACK_1 0x2000
-#define OR_DTACK_2 0x4000
-#define OR_DTACK_3 0x6000
-#define OR_DTACK_4 0x8000
-#define OR_DTACK_5 0xA000
-#define OR_DTACK_6 0xC000
-#define OR_DTACK_EXT 0xE000
-#define OR_SIZE_64K 0x1FE0
-#define OR_SIZE_128K 0x1FC0
-#define OR_SIZE_256K 0x1F80
-#define OR_SIZE_512K 0x1F00
-#define OR_SIZE_1M 0x1E00
-#define OR_SIZE_2M 0x1C00
-#define OR_MASK_RW 0x0000
-#define OR_NO_MASK_RW 0x0002
-#define OR_MASK_FC 0x0000
-#define OR_NO_MASK_FC 0x0001
-
-#define MAKE_BR(base_address, enable, rw, fc) \
- ((base_address >> 11) | fc | rw | enable)
-
-#define MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask) \
- (DtAck | ((~(bsize - 1) & 0x00FFFFFF) >> 11) | FC_Mask | RW_Mask)
-
-#define __REG_CAT(r, n) r ## n
-#define WRITE_BR(csel, base_address, enable, rw, fc) \
- __REG_CAT(m302.reg.br, csel) = MAKE_BR(base_address, enable, rw, fc)
-#define WRITE_OR(csel, bsize, DtAck, RW_Mask, FC_Mask) \
- __REG_CAT(m302.reg.or, csel) = MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask)
-
-/* ----
- MC68302 Watchdog Timer Enable Bit
-
- */
-#define WATCHDOG_ENABLE (1)
-#define WATCHDOG_TRIGGER() (m302.reg.wrr = 0x10 | WATCHDOG_ENABLE, m302.reg.wcn = 0)
-#define WATCHDOG_TOGGLE() (m302.reg.wcn = WATCHDOG_TIMEOUT_PERIOD)
-#define DISABLE_WATCHDOG() (m302.reg.wrr = 0)
-
-/*
- * Declare the variable that's used to reference the variables in
- * the dual-port RAM.
- */
-extern volatile m302_dualPortRAM_t m302;
-
-#endif
-/* end of include file */