diff options
Diffstat (limited to 'cpukit/score/cpu/i960/rtems/score/i960.h')
| -rw-r--r-- | cpukit/score/cpu/i960/rtems/score/i960.h | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/cpukit/score/cpu/i960/rtems/score/i960.h b/cpukit/score/cpu/i960/rtems/score/i960.h deleted file mode 100644 index 42991c968b..0000000000 --- a/cpukit/score/cpu/i960/rtems/score/i960.h +++ /dev/null @@ -1,194 +0,0 @@ -/* i960.h - * - * This include file contains information pertaining to the Intel - * i960 processor family. - * - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#ifndef __i960_h -#define __i960_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the Intel i960 - * family. It does this by setting variables to indicate - * which implementation dependent features are present - * in a particular member of the family. - * - * NOTE: For now i960 support is for models without an FPU. - * The stubs for FP routines are in place so only need to be filled in. - * - * NOTE: RTEMS defines a canonical name for each cpu model. - */ - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "Intel i960" - -/* - * This should work since most i960 models do not have FPUs. The logic is: - * - * + If the user specifically asks for soft-float, give it to them - * regardless of hardware availability. - * + If the CPU has hardware FPU, then use it. - * + Otherwise, we have to use soft float. - */ - -#if defined(_SOFT_FLOAT) -#define I960_HAS_FPU 0 -#elif defined(_i960_KB__) || defined(_i960_SB__) || defined(_i960_SB__) || \ - defined(_i960_JF__) || defined(_i960_MC__) || defined(_i960_CC__) -#define I960_HAS_FPU 1 -#else -#define I960_HAS_FPU 0 -#endif - -/* - * Some of the CPU models may have better performance with - * alignment of 8 or 16 but we don't know what model we are - * being compiled for based solely on the information provided - * when multilibbing. - */ - -#define I960_CPU_ALIGNMENT 4 - -/* - * This is not the perfect CPU model name but it is adequate and - * reflects what we know from multilib. - */ - -#if I960_HAS_FPU -#define CPU_MODEL_NAME "w/FPU" -#else -#define CPU_MODEL_NAME "w/soft-float" -#endif -#ifndef ASM - - -/* - * Miscellaneous Support Routines - */ - -#define i960_reload_ctl_group( group ) \ - { register int _cmd = ((group)|0x400) ; \ - asm volatile( "sysctl %0,%0,%0" : "=d" (_cmd) : "0" (_cmd) ); \ - } - -#define i960_atomic_modify( mask, addr, prev ) \ - { register unsigned int _mask = (mask); \ - register unsigned int *_addr = (unsigned int *)(addr); \ - asm volatile( "atmod %0,%1,%1" \ - : "=d" (_addr), "=d" (_mask) \ - : "0" (_addr), "1" (_mask) ); \ - (prev) = _mask; \ - } - -#define atomic_modify( _mask, _address, _previous ) \ - i960_atomic_modify( _mask, _address, _previous ) - -#define i960_enable_tracing() \ - { register unsigned int _pc = 0x1; \ - asm volatile( "modpc 0,%0,%0" : "=d" (_pc) : "0" (_pc) ); \ - } - -/* - * Interrupt Level Routines - */ - -#define i960_disable_interrupts( oldlevel ) \ - { (oldlevel) = 0x1f0000; \ - asm volatile ( "modpc 0,%1,%1" \ - : "=d" ((oldlevel)) \ - : "0" ((oldlevel)) ); \ - } - -#define i960_enable_interrupts( oldlevel ) \ - { unsigned int _mask = 0x1f0000; \ - asm volatile ( "modpc 0,%0,%1" \ - : "=d" (_mask), "=d" ((oldlevel)) \ - : "0" (_mask), "1" ((oldlevel)) ); \ - } - -#define i960_flash_interrupts( oldlevel ) \ - { unsigned int _mask = 0x1f0000; \ - asm volatile ( "modpc 0,%0,%1 ; \ - mov %0,%1 ; \ - modpc 0,%0,%1" \ - : "=d" (_mask), "=d" ((oldlevel)) \ - : "0" (_mask), "1" ((oldlevel)) ); \ - } - -#define i960_get_interrupt_level( _level ) \ - { \ - i960_disable_interrupts( _level ); \ - i960_enable_interrupts( _level ); \ - (_level) = ((_level) & 0x1f0000) >> 16; \ - } while ( 0 ) - -#define i960_cause_intr( intr ) \ - { register int _intr = (intr); \ - asm volatile( "sysctl %0,%0,%0" : "=d" (_intr) : "0" (_intr) ); \ - } - -/* - * Interrupt Masking Routines - */ - -static inline unsigned int i960_get_fp() -{ register unsigned int _fp=0; - asm volatile( "mov fp,%0" : "=d" (_fp) : "0" (_fp) ); - return ( _fp ); -} - -/* - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version is based on code presented in Vol. 4, No. 4 of - * Insight 960. It is certainly something you wouldn't think - * of on your own. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - register unsigned int to_swap = value; - register unsigned int temp = 0xFF00FF00; - register unsigned int swapped = 0; - - /* to_swap swapped */ - asm volatile ( "rotate 16,%0,%2 ;" /* 0x12345678 0x56781234 */ - "modify %1,%0,%2 ;" /* 0x12345678 0x12785634 */ - "rotate 8,%2,%2" /* 0x12345678 0x78563412 */ - : "=r" (to_swap), "=r" (temp), "=r" (swapped) - : "0" (to_swap), "1" (temp), "2" (swapped) - ); - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ |