diff options
Diffstat (limited to 'cpukit/sapi/include/confdefs.h')
| -rw-r--r-- | cpukit/sapi/include/confdefs.h | 2342 |
1 files changed, 2342 insertions, 0 deletions
diff --git a/cpukit/sapi/include/confdefs.h b/cpukit/sapi/include/confdefs.h new file mode 100644 index 0000000000..ad81403430 --- /dev/null +++ b/cpukit/sapi/include/confdefs.h @@ -0,0 +1,2342 @@ +/** + * @file rtems/confdefs.h + * + * This include file contains the configuration table template that will + * be instantiated by an application based on the setting of a number + * of macros. The macros are documented in the Configuring a System + * chapter of the Classic API User's Guide + * + * The model is to estimate the memory required for each configured item + * and sum those estimates. The estimate can be too high or too low for + * a variety of reasons: + * + * Reasons estimate is too high: + * + FP contexts (not all tasks are FP) + * + * Reasons estimate is too low: + * + stacks greater than minimum size + * + messages + * + application must account for device driver resources + * + application must account for add-on library resource requirements + * + * NOTE: Eventually this may be able to take into account some of + * the above. This procedure has evolved from just enough to + * support the RTEMS Test Suites into something that can be + * used remarkably reliably by most applications. + */ + +/* + * COPYRIGHT (c) 1989-2011. + * On-Line Applications Research Corporation (OAR). + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rtems.com/license/LICENSE. + * + * $Id$ + */ + +#ifndef __CONFIGURATION_TEMPLATE_h +#define __CONFIGURATION_TEMPLATE_h + +/* + * Include the executive's configuration + */ +#include <rtems.h> +#include <rtems/score/apimutex.h> + +#ifdef __cplusplus +extern "C" { +#endif + +extern rtems_initialization_tasks_table Initialization_tasks[]; +extern rtems_driver_address_table Device_drivers[]; +extern rtems_configuration_table Configuration; +#if defined(RTEMS_MULTIPROCESSING) + extern rtems_multiprocessing_table Multiprocessing_configuration; +#endif +#ifdef RTEMS_POSIX_API + extern posix_api_configuration_table Configuration_POSIX_API; +#endif + +/** + * This macro determines whether the RTEMS reentrancy support for + * the Newlib C Library is enabled. + */ +#ifdef RTEMS_SCHEDSIM + #undef RTEMS_NEWLIB +#endif + +#if (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)) + #define CONFIGURE_NEWLIB_EXTENSION 1 +#else + #define CONFIGURE_NEWLIB_EXTENSION 0 +#endif + +#ifndef RTEMS_SCHEDSIM +#include <rtems/libio.h> + +#ifdef CONFIGURE_INIT +rtems_libio_init_functions_t rtems_libio_init_helper = + #ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM + NULL; + #else + rtems_libio_init; + #endif + +rtems_libio_supp_functions_t rtems_libio_supp_helper = + #ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM + NULL; + #else + open_dev_console; + #endif + +rtems_fs_init_functions_t rtems_fs_init_helper = + #ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM + NULL; + #else + rtems_filesystem_initialize; + #endif +#endif +#endif + +/* + * If the application disables the filesystem, they will not need + * a mount table, so do not produce one. + */ +#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM + #define CONFIGURE_HAS_OWN_MOUNT_TABLE +#endif + +/** + * This macro defines the number of POSIX file descriptors allocated + * and managed by libio. These are the "integer" file descriptors that + * are used by calls like open(2) and read(2). + */ +#ifndef CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS + #define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 3 +#endif + +/** + * From the number of file descriptors, we can determine how many + * semaphores the implementation will require. + */ +#define CONFIGURE_LIBIO_SEMAPHORES \ + (CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS + 1) + +#ifdef CONFIGURE_INIT + /** + * When instantiating the configuration tables, this variable is + * initialized to specify the maximum number of file descriptors. + */ + uint32_t rtems_libio_number_iops = CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS; +#endif + +/** + * This macro determines if termios is disabled by this application. + * This only means that resources will not be reserved. If you end + * up using termios, it will fail. + */ +#ifdef CONFIGURE_TERMIOS_DISABLED + #define CONFIGURE_TERMIOS_SEMAPHORES 0 +#else + /** + * This macro specifies the number of serial or PTY ports that will + * use termios. + */ + #ifndef CONFIGURE_NUMBER_OF_TERMIOS_PORTS + #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 1 + #endif + + /** + * This macro reserves the number of semaphores required by termios + * based upon the number of communication ports that will use it. + */ + #define CONFIGURE_TERMIOS_SEMAPHORES \ + ((CONFIGURE_NUMBER_OF_TERMIOS_PORTS * 4) + 1) +#endif + +/** + * This macro specifies the number of PTYs that can be concurrently + * active. + */ +#ifndef CONFIGURE_MAXIMUM_PTYS + #define CONFIGURE_MAXIMUM_PTYS 0 +#endif + +/** + * This variable contains the maximum number of PTYs that can be + * concurrently active. + */ +#ifdef CONFIGURE_INIT + int rtems_telnetd_maximum_ptys = CONFIGURE_MAXIMUM_PTYS; +#else + extern int rtems_telnetd_maximum_ptys; +#endif + +#if defined(RTEMS_SMP) + /* + * If configured for SMP, then we need to know the maximum CPU cores. + */ + #if !defined(CONFIGURE_SMP_APPLICATION) + #if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS) + #define CONFIGURE_SMP_MAXIMUM_PROCESSORS 1 + #endif + #else + #if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS) + #error "CONFIGURE_SMP_MAXIMUM_PROCESSORS not specified for SMP Application" + #endif + #endif +#endif + +/* + * Filesystems and Mount Table Configuration. + * + * Defines to control the file system: + * + * CONFIGURE_APPLICATION_DISABLE_FILESYSTEM: + * Disable the RTEMS filesystems. You get an empty DEVFS. + * + * CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM: + * Use the DEVFS as the root file system. Limited functions are + * provided when this is used. + * + * CONFIGURE_FILESYSTEM_ALL: + * Add file filesystems to the default filesystem table. + * + * List of available file systems. You can define as many as you like: + * CONFIGURE_FILESYSTEM_MINIIMFS - MiniIMFS, use DEVFS now + * CONFIGURE_FILESYSTEM_IMFS - In Memory File System (IMFS) + * CONFIGURE_FILESYSTEM_DEVFS - Device File System (DSVFS) + * CONFIGURE_FILESYSTEM_TFTPFS - TFTP File System, networking enabled + * CONFIGURE_FILESYSTEM_FTPFS - FTP File System, networking enabled + * CONFIGURE_FILESYSTEM_NFS - Network File System, networking enabled + * CONFIGURE_FILESYSTEM_DOSFS - DOS File System, uses libblock + * CONFIGURE_FILESYSTEM_RFS - RTEMS File System (RFS), uses libblock + * + * Combinations: + * + * - If nothing is defined the base file system is the IMFS. + * + * - If CONFIGURE_APPLICATION_DISABLE_FILESYSTEM is defined all filesystem + * are disabled by force and an empty DEVFS is created. + * + * - If CONFIGURE_USE_DEV_AS_BASE_FILESYSTEM is defined all filesystem + * are disabled by force and DEVFS is defined. + */ + +#ifdef CONFIGURE_INIT + + /* + * Include all file systems. Do this before checking if the filesystem has + * been disabled. + */ + #ifdef CONFIGURE_FILESYSTEM_ALL + #define CONFIGURE_FILESYSTEM_MINIIMFS + #define CONFIGURE_FILESYSTEM_IMFS + #define CONFIGURE_FILESYSTEM_DEVFS + #define CONFIGURE_FILESYSTEM_TFTPFS + #define CONFIGURE_FILESYSTEM_FTPFS + #define CONFIGURE_FILESYSTEM_NFS + #define CONFIGURE_FILESYSTEM_DOSFS + #define CONFIGURE_FILESYSTEM_RFS + #endif + + /* + * If disabling the file system, give a compile error if the user has + * configured other filesystem parameters. + */ + #if defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM) + #if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM) || \ + defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM) + #error "Filesystem disabled but a base filesystem configured." + #endif + + #if defined(CONFIGURE_FILESYSTEM_MINIIMFS) || \ + defined(CONFIGURE_FILESYSTEM_IMFS) || \ + defined(CONFIGURE_FILESYSTEM_DEVFS) || \ + defined(CONFIGURE_FILESYSTEM_TFTPFS) || \ + defined(CONFIGURE_FILESYSTEM_FTPFS) || \ + defined(CONFIGURE_FILESYSTEM_NFS) || \ + defined(CONFIGURE_FILESYSTEM_DOSFS) || \ + defined(CONFIGURE_FILESYSTEM_RFS) + #error "Configured filesystems but root filesystem was not IMFS!" + #error "Filesystems could be disabled, DEVFS is root, or" + #error " miniIMFS is root!" + #endif + #endif + + /* + * If the base filesystem is DEVFS define it else define IMFS. + * We will have either DEVFS or IMFS defined after this. + */ + #if !defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM) + #if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM) + #define CONFIGURE_FILESYSTEM_DEVFS + #elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM) + #define CONFIGURE_FILESYSTEM_MINIIMFS + #elif !defined(CONFIGURE_FILESYSTEM_IMFS) + #define CONFIGURE_FILESYSTEM_IMFS + #endif + #endif + +#endif + +#ifndef RTEMS_SCHEDSIM +/** + * IMFS + */ +#include <rtems/imfs.h> + +/** + * This specifies the number of bytes per block for files within the IMFS. + * There are a maximum number of blocks per file so this dictates the maximum + * size of a file. This has to be balanced with the unused portion of each + * block that might be wasted. + */ +#ifndef CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK + #define CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK \ + IMFS_MEMFILE_DEFAULT_BYTES_PER_BLOCK +#endif + +/** + * This defines the miniIMFS file system table entry. + */ +#if !defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS) && \ + defined(CONFIGURE_FILESYSTEM_MINIIMFS) + #define CONFIGURE_FILESYSTEM_ENTRY_miniIMFS \ + { RTEMS_FILESYSTEM_TYPE_MINIIMFS, miniIMFS_initialize } +#endif +#endif + +/** + * Internall it is called FIFOs not pipes + */ +#if defined(CONFIGURE_PIPES_ENABLED) + #define CONFIGURE_FIFOS_ENABLED +#endif + +#ifndef RTEMS_SCHEDSIM +/** + * This defines the IMFS file system table entry. + */ +#if !defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS) && \ + defined(CONFIGURE_FILESYSTEM_IMFS) + #if defined(CONFIGURE_FIFOS_ENABLED) + #define CONFIGURE_FILESYSTEM_ENTRY_IMFS \ + { RTEMS_FILESYSTEM_TYPE_IMFS, fifoIMFS_initialize } + #else + #define CONFIGURE_FILESYSTEM_ENTRY_IMFS \ + { RTEMS_FILESYSTEM_TYPE_IMFS, IMFS_initialize } + #endif +#endif +#endif + +/** + * This sets up the resources for the PIPES/FIFOs + */ +#if defined(CONFIGURE_FIFOS_ENABLED) + #if !defined(CONFIGURE_MAXIMUM_FIFOS) && !defined(CONFIGURE_MAXIMUM_PIPES) + #error "No FIFOs or PIPES configured" + #endif + #if !defined(CONFIGURE_MAXIMUM_FIFOS) + #define CONFIGURE_MAXIMUM_FIFOS 0 + #endif + #if !defined(CONFIGURE_MAXIMUM_PIPES) + #define CONFIGURE_MAXIMUM_PIPES 0 + #endif + #define CONFIGURE_BARRIERS_FOR_FIFOS \ + (2 * (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES)) + #define CONFIGURE_SEMAPHORES_FOR_FIFOS \ + (1 + (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES)) +#else + #define CONFIGURE_BARRIERS_FOR_FIFOS 0 + #define CONFIGURE_SEMAPHORES_FOR_FIFOS 0 +#endif + +/** + * DEVFS + */ +#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS) && \ + defined(CONFIGURE_FILESYSTEM_DEVFS) +#include <rtems/devfs.h> + #define CONFIGURE_FILESYSTEM_ENTRY_DEVFS \ + { RTEMS_FILESYSTEM_TYPE_DEVFS, devFS_initialize } +#endif + +#ifdef RTEMS_NETWORKING + /** + * FTPFS + */ + #if !defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS) && \ + defined(CONFIGURE_FILESYSTEM_FTPFS) + #include <rtems/ftpfs.h> + #define CONFIGURE_FILESYSTEM_ENTRY_FTPFS \ + { RTEMS_FILESYSTEM_TYPE_FTPFS, rtems_ftpfs_initialize } + #endif + + /** + * TFTPFS + */ + #if !defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS) && \ + defined(CONFIGURE_FILESYSTEM_TFTPFS) + #include <rtems/tftp.h> + #define CONFIGURE_FILESYSTEM_ENTRY_TFTPFS \ + { RTEMS_FILESYSTEM_TYPE_TFTPFS, rtems_tftpfs_initialize } + #endif + + /** + * NFS + */ + #if !defined(CONFIGURE_FILESYSTEM_ENTRY_NFS) && \ + defined(CONFIGURE_FILESYSTEM_NFS) + #include <librtemsNfs.h> + #define CONFIGURE_FILESYSTEM_ENTRY_NFS \ + { RTEMS_FILESYSTEM_TYPE_NFS, rtems_nfs_initialize } + #endif +#endif + +/** + * DOSFS + */ +#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS) && \ + defined(CONFIGURE_FILESYSTEM_DOSFS) + #include <rtems/dosfs.h> + #define CONFIGURE_FILESYSTEM_ENTRY_DOSFS \ + { RTEMS_FILESYSTEM_TYPE_DOSFS, rtems_dosfs_initialize } +#endif + +/** + * RFS + */ +#if !defined(CONFIGURE_FILESYSTEM_ENTRY_RFS) && \ + defined(CONFIGURE_FILESYSTEM_RFS) + #include <rtems/rtems-rfs.h> + #define CONFIGURE_FILESYSTEM_ENTRY_RFS \ + { RTEMS_FILESYSTEM_TYPE_RFS, rtems_rfs_rtems_initialise } +#endif + +#ifdef CONFIGURE_INIT + + /* + * DEVFS variables. + */ + #if defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM) + #define CONFIGURE_MEMORY_FOR_DEVFS 0 + #elif defined(CONFIGURE_FILESYSTEM_DEVFS) + #ifndef CONFIGURE_MAXIMUM_DEVICES + #define CONFIGURE_MAXIMUM_DEVICES 4 + #endif + #include <rtems/devfs.h> + uint32_t rtems_device_table_size = CONFIGURE_MAXIMUM_DEVICES; + #define CONFIGURE_MEMORY_FOR_DEVFS \ + _Configure_Object_RAM(CONFIGURE_MAXIMUM_DEVICES, \ + sizeof (rtems_device_name_t)) + #else + #define CONFIGURE_MEMORY_FOR_DEVFS 0 + #endif + +#ifndef RTEMS_SCHEDSIM + #if defined(CONFIGURE_FILESYSTEM_IMFS) || \ + defined(CONFIGURE_FILESYSTEM_MINIIMFS) + int imfs_rq_memfile_bytes_per_block = CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK; + #endif +#endif + + /** + * Table termination record. + */ + #define CONFIGURE_FILESYSTEM_NULL { NULL, NULL } + +#ifndef RTEMS_SCHEDSIM + /** + * The default file system table. Must be terminated with the NULL entry if + * you provide your own. + */ + #ifndef CONFIGURE_HAS_OWN_FILESYSTEM_TABLE + const rtems_filesystem_table_t rtems_filesystem_table[] = { + #if defined(CONFIGURE_FILESYSTEM_MINIIMFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS) + CONFIGURE_FILESYSTEM_ENTRY_miniIMFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_IMFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS) + CONFIGURE_FILESYSTEM_ENTRY_IMFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_DEVFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS) + CONFIGURE_FILESYSTEM_ENTRY_DEVFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_TFTPFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS) + CONFIGURE_FILESYSTEM_ENTRY_TFTPFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_FTPFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS) + CONFIGURE_FILESYSTEM_ENTRY_FTPFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_NFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_NFS) + CONFIGURE_FILESYSTEM_ENTRY_NFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_DOSFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS) + CONFIGURE_FILESYSTEM_ENTRY_DOSFS, + #endif + #if defined(CONFIGURE_FILESYSTEM_RFS) && \ + defined(CONFIGURE_FILESYSTEM_ENTRY_RFS) + CONFIGURE_FILESYSTEM_ENTRY_RFS, + #endif + CONFIGURE_FILESYSTEM_NULL + }; + #endif + + #ifndef CONFIGURE_HAS_OWN_MOUNT_TABLE + const rtems_filesystem_mount_table_t configuration_mount_table = { + #if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM) + RTEMS_FILESYSTEM_TYPE_DEVFS, + #elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM) + RTEMS_FILESYSTEM_TYPE_MINIIMFS, + #else /* using IMFS as base filesystem */ + RTEMS_FILESYSTEM_TYPE_IMFS, + #endif + RTEMS_FILESYSTEM_READ_WRITE, + NULL, + NULL + }; + + const rtems_filesystem_mount_table_t + *rtems_filesystem_mount_table = &configuration_mount_table; + const int rtems_filesystem_mount_table_size = 1; + #endif + +#endif +#endif + +/* + * STACK_CHECKER_ON was still available in 4.9 so give a warning for now. + */ +#if defined(STACK_CHECKER_ON) + #define CONFIGURE_STACK_CHECKER_ENABLED + #warning "STACK_CHECKER_ON deprecated -- use CONFIGURE_STACK_CHECKER_ENABLED" +#endif + +/** + * This configures the stack checker user extension. + */ +#ifdef CONFIGURE_STACK_CHECKER_ENABLED + #define CONFIGURE_STACK_CHECKER_EXTENSION 1 +#else + #define CONFIGURE_STACK_CHECKER_EXTENSION 0 +#endif + +/** + * @brief Maximum Priority configuration + * + * This configures the maximum priority value that + * a task may have. + * + * The following applies to the data space requirements + * of the Priority Scheduler. + * + * By reducing the number of priorities in a system, + * the amount of RAM required by RTEMS can be significantly + * reduced. RTEMS allocates a Chain_Control structure per + * priority and this structure contains 3 pointers. So + * the default is (256 * 12) = 3K on 32-bit architectures. + * + * This must be one less than a power of 2 between + * 4 and 256. Valid values along with the application + * priority levels and memory saved when pointers are + * 32-bits in size are: + * + * + 3, 2 application priorities, 3024 bytes saved + * + 7, 5 application priorities, 2976 bytes saved + * + 15, 13 application priorities, 2880 bytes saved + * + 31, 29 application priorities, 2688 bytes saved + * + 63, 61 application priorities, 2304 bytes saved + * + 127, 125 application priorities, 1536 bytes saved + * + 255, 253 application priorities, 0 bytes saved + * + * It is specified in terms of Classic API priority values. + */ +#ifndef CONFIGURE_MAXIMUM_PRIORITY + #define CONFIGURE_MAXIMUM_PRIORITY PRIORITY_DEFAULT_MAXIMUM +#endif + +/* + * Scheduler configuration. + * + * The scheduler configuration allows an application to select the + * scheduling policy to use. The supported configurations are: + * CONFIGURE_SCHEDULER_USER - user provided scheduler + * CONFIGURE_SCHEDULER_PRIORITY - Deterministic Priority Scheduler + * CONFIGURE_SCHEDULER_SIMPLE - Light-weight Priority Scheduler + * + * If no configuration is specified by the application, then + * CONFIGURE_SCHEDULER_PRIORITY is assumed to be the default. + * + * An application can define its own scheduling policy by defining + * CONFIGURE_SCHEDULER_USER and the following: + * - CONFIGURE_SCHEDULER_ENTRY_POINTS + * - CONFIGURE_MEMORY_FOR_SCHEDULER - base memory + * - CONFIGURE_MEMORY_PER_TASK_FOR_SCHEDULER - per task memory + */ +#include <rtems/score/scheduler.h> + +#if defined(CONFIGURE_SCHEDULER_USER) && \ + !defined(CONFIGURE_SCHEDULER_USER_ENTRY_POINTS) + #error "CONFIGURE_ERROR: CONFIGURE_SCHEDULER_USER requires CONFIGURE_SCHEDULER_USER_ENTRY_POINTS" +#endif + +/* If no scheduler is specified, the priority scheduler is default. */ +#if !defined(CONFIGURE_SCHEDULER_USER) && \ + !defined(CONFIGURE_SCHEDULER_PRIORITY) && \ + !defined(CONFIGURE_SCHEDULER_SIMPLE) + #define CONFIGURE_SCHEDULER_PRIORITY +#endif + +/* + * If the Priority Scheduler is selected, then configure for it. + */ +#if defined(CONFIGURE_SCHEDULER_PRIORITY) + #include <rtems/score/schedulerpriority.h> + #define SCHEDULER_ENTRY_POINTS SCHEDULER_PRIORITY_ENTRY_POINTS + + /** + * This defines the memory used by the priority scheduler. + */ + #define CONFIGURE_MEMORY_FOR_SCHEDULER ( \ + _Configure_From_workspace( \ + ((CONFIGURE_MAXIMUM_PRIORITY+1) * sizeof(Chain_Control)) ) \ + ) + #define CONFIGURE_MEMORY_PER_TASK_FOR_SCHEDULER ( \ + _Configure_From_workspace(sizeof(Scheduler_priority_Per_thread)) ) +#endif + +/* + * If the Simple Priority Scheduler is selected, then configure for it. + */ +#if defined(CONFIGURE_SCHEDULER_SIMPLE) + #include <rtems/score/schedulersimple.h> + #define SCHEDULER_ENTRY_POINTS SCHEDULER_SIMPLE_ENTRY_POINTS + + /** + * define the memory used by the simple scheduler + */ + #define CONFIGURE_MEMORY_FOR_SCHEDULER ( \ + _Configure_From_workspace( sizeof(Chain_Control) ) \ + ) + #define CONFIGURE_MEMORY_PER_TASK_FOR_SCHEDULER (0) +#endif + +/* + * Set up the scheduler entry points table. The scheduling code uses + * this code to know which scheduler is configured by the user. + */ +#ifdef CONFIGURE_INIT + Scheduler_Control _Scheduler = { + NULL, /* Scheduler Specific Data Pointer */ + SCHEDULER_ENTRY_POINTS /* Scheduler Operations */ + }; +#endif + +/* + * If you said the IDLE task was going to do application initialization + * and didn't override the IDLE body, then something is amiss. + */ +#if (defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) && \ + !defined(CONFIGURE_IDLE_TASK_BODY)) + #error "CONFIGURE_ERROR: You did not override the IDLE task body." +#endif + +/** + * @brief Idle task body configuration + * + * There is a default IDLE thread body provided by RTEMS which + * has the possibility of being CPU specific. There may be a + * BSP specific override of the RTEMS default body and in turn, + * the application may override and provide its own. + */ +#ifndef CONFIGURE_IDLE_TASK_BODY + #if defined(BSP_IDLE_TASK_BODY) + #define CONFIGURE_IDLE_TASK_BODY BSP_IDLE_TASK_BODY + #elif (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) + #define CONFIGURE_IDLE_TASK_BODY _CPU_Thread_Idle_body + #else + /* only instantiate and compile if used */ + #ifdef CONFIGURE_INIT + void *_Thread_Idle_body(uintptr_t ignored) + { + for( ; ; ) ; + return 0; /* to avoid warning */ + } + #endif + #define CONFIGURE_IDLE_TASK_BODY _Thread_Idle_body + #endif +#endif + +/** + * By default, use the minimum stack size requested by this port. + */ +#ifndef CONFIGURE_MINIMUM_TASK_STACK_SIZE + #define CONFIGURE_MINIMUM_TASK_STACK_SIZE CPU_STACK_MINIMUM_SIZE +#endif + +/** + * @brief Idle task stack size configuration + * + * By default, the IDLE task will have a stack of minimum size. + * The BSP or application may override this value. + */ +#ifndef CONFIGURE_IDLE_TASK_STACK_SIZE + #ifdef BSP_IDLE_TASK_STACK_SIZE + #define CONFIGURE_IDLE_TASK_STACK_SIZE BSP_IDLE_TASK_STACK_SIZE + #else + #define CONFIGURE_IDLE_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE + #endif +#endif + +/** + * @brief Interrupt stack size configuration + * + * By default, the interrupt stack will be of minimum size. + * The BSP or application may override this value. + */ +#ifndef CONFIGURE_INTERRUPT_STACK_SIZE + #ifdef BSP_INTERRUPT_STACK_SIZE + #define CONFIGURE_INTERRUPT_STACK_SIZE BSP_INTERRUPT_STACK_SIZE + #else + #define CONFIGURE_INTERRUPT_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE + #endif +#endif + +/** + * This reserves memory for the interrupt stack if it is to be allocated + * by RTEMS rather than the BSP. + * + * @todo Try to get to the point where all BSPs support allocating the + * memory from the Workspace. + */ +#if (CPU_ALLOCATE_INTERRUPT_STACK == 0) + #define CONFIGURE_INTERRUPT_STACK_MEMORY 0 +#else + #define CONFIGURE_INTERRUPT_STACK_MEMORY \ + _Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE ) +#endif + +/** + * Configure the very much optional task stack allocator + */ +#ifndef CONFIGURE_TASK_STACK_ALLOCATOR + #define CONFIGURE_TASK_STACK_ALLOCATOR NULL +#endif + +/** + * Configure the very much optional task stack deallocator + */ +#ifndef CONFIGURE_TASK_STACK_DEALLOCATOR + #define CONFIGURE_TASK_STACK_DEALLOCATOR NULL +#endif + +/** + * Should the RTEMS Workspace and C Program Heap be cleared automatically + * at system start up? + */ +#ifndef CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY + #ifdef BSP_ZERO_WORKSPACE_AUTOMATICALLY + #define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY \ + BSP_ZERO_WORKSPACE_AUTOMATICALLY + #else + #define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY FALSE + #endif +#endif + +/* + * RTEMS Malloc configuration + */ + +#include <rtems/malloc.h> + +#ifdef CONFIGURE_INIT + /** + * By default, RTEMS uses separate heaps for the RTEMS Workspace and + * the C Program Heap. On many BSPs, these can be optionally + * combined provided one larger memory pool. This is particularly + * useful in combination with the unlimited objects configuration. + */ + #ifdef CONFIGURE_UNIFIED_WORK_AREAS + #include <rtems/score/wkspace.h> + Heap_Control *RTEMS_Malloc_Heap = &_Workspace_Area; + bool rtems_unified_work_area = true; + #else + Heap_Control RTEMS_Malloc_Area; + Heap_Control *RTEMS_Malloc_Heap = &RTEMS_Malloc_Area; + bool rtems_unified_work_area = false; + #endif +#endif + +#ifdef CONFIGURE_INIT + /** + * This configures the malloc family statistics to be available. + * By default only function call counts are kept. + */ + rtems_malloc_statistics_functions_t *rtems_malloc_statistics_helpers = + #ifndef CONFIGURE_MALLOC_STATISTICS + NULL; + #else + &rtems_malloc_statistics_helpers_table; + #endif +#endif + +#ifdef CONFIGURE_INIT + /** + * This configures the sbrk() support for the malloc family. + * By default it is assumed that the BSP provides all available + * RAM to the malloc family implementation so sbrk()'ing to get + * more memory would always fail anyway. + */ + rtems_malloc_sbrk_functions_t *rtems_malloc_sbrk_helpers = + #ifndef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK + NULL; + #else + &rtems_malloc_sbrk_helpers_table; + #endif +#endif + +#ifdef CONFIGURE_INIT + /** + * This configures the malloc family plugin which dirties memory + * allocated. This is helpful for finding unitialized data structure + * problems. + */ + rtems_malloc_dirtier_t rtems_malloc_dirty_helper = + #if defined(CONFIGURE_MALLOC_DIRTY) + rtems_malloc_dirty_memory; + #else + NULL; + #endif +#endif + +/** + * This is a helper macro used in calculations in this file. It is used + * to noted when an element is allocated from the RTEMS Workspace and adds + * a factor to account for heap overhead plus an alignment factor that + * may be applied. + */ +#define _Configure_From_workspace(_size) \ + (ssize_t)((_size) + (2 * sizeof(uint32_t)) + CPU_ALIGNMENT) + +/** + * Do not use the unlimited bit as part of the multiplication + * for memory usage. + */ +#define _Configure_Max_Objects(_max) \ + ((_max) & ~RTEMS_UNLIMITED_OBJECTS) + +/** + * This macro accounts for how memory for a set of configured objects is + * allocated from the Executive Workspace. + * + * NOTE: It does NOT attempt to address the more complex case of unlimited + * objects. + */ +#define _Configure_Object_RAM(_number, _size) \ + ( _Configure_From_workspace(_Configure_Max_Objects(_number) * (_size)) + \ + _Configure_From_workspace( \ + ((_Configure_Max_Objects(_number) + 1) * sizeof(Objects_Control *)) + \ + (sizeof(void *) + sizeof(uint32_t) + sizeof(Objects_Name *)) \ + ) \ + ) + +/* + * Default User Initialization Task Table. This table guarantees that + * one user initialization table is defined. + */ + +#ifdef CONFIGURE_RTEMS_INIT_TASKS_TABLE + +#ifdef CONFIGURE_HAS_OWN_INIT_TASK_TABLE + +/* + * The user is defining their own table information and setting the + * appropriate variables. + */ + +#else + +#ifndef CONFIGURE_INIT_TASK_NAME + #define CONFIGURE_INIT_TASK_NAME rtems_build_name('U', 'I', '1', ' ') +#endif + +#ifndef CONFIGURE_INIT_TASK_STACK_SIZE + #define CONFIGURE_INIT_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE +#endif + +#ifndef CONFIGURE_INIT_TASK_PRIORITY + #define CONFIGURE_INIT_TASK_PRIORITY 1 +#endif + +#ifndef CONFIGURE_INIT_TASK_ATTRIBUTES + #define CONFIGURE_INIT_TASK_ATTRIBUTES RTEMS_DEFAULT_ATTRIBUTES +#endif + +#ifndef CONFIGURE_INIT_TASK_ENTRY_POINT + #ifdef __cplusplus + extern "C" { + #endif + rtems_task Init (rtems_task_argument ); + #ifdef __cplusplus + } + #endif + #define CONFIGURE_INIT_TASK_ENTRY_POINT Init + extern const char* bsp_boot_cmdline; + #define CONFIGURE_INIT_TASK_ARGUMENTS ((rtems_task_argument) &bsp_boot_cmdline) +#endif + +#ifndef CONFIGURE_INIT_TASK_INITIAL_MODES + #define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_NO_PREEMPT +#endif + +#ifndef CONFIGURE_INIT_TASK_ARGUMENTS + #define CONFIGURE_INIT_TASK_ARGUMENTS 0 +#endif + +#ifdef CONFIGURE_INIT + rtems_initialization_tasks_table Initialization_tasks[] = { + { CONFIGURE_INIT_TASK_NAME, + CONFIGURE_INIT_TASK_STACK_SIZE, + CONFIGURE_INIT_TASK_PRIORITY, + CONFIGURE_INIT_TASK_ATTRIBUTES, + CONFIGURE_INIT_TASK_ENTRY_POINT, + CONFIGURE_INIT_TASK_INITIAL_MODES, + CONFIGURE_INIT_TASK_ARGUMENTS + } + }; +#endif + +#define CONFIGURE_INIT_TASK_TABLE Initialization_tasks + +#define CONFIGURE_INIT_TASK_TABLE_SIZE \ + sizeof(CONFIGURE_INIT_TASK_TABLE) / sizeof(rtems_initialization_tasks_table) + +#endif /* CONFIGURE_HAS_OWN_INIT_TASK_TABLE */ + +#else /* CONFIGURE_RTEMS_INIT_TASKS_TABLE */ + +#define CONFIGURE_INIT_TASK_TABLE NULL +#define CONFIGURE_INIT_TASK_TABLE_SIZE 0 +#define CONFIGURE_INIT_TASK_STACK_SIZE 0 + +#endif + +/* + * Default Device Driver Table. Each driver needed by the test is explicitly + * choosen by that test. There is always a null driver entry. + */ + +#define NULL_DRIVER_TABLE_ENTRY \ + { NULL, NULL, NULL, NULL, NULL, NULL } + +#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER + #include <rtems/console.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER + #include <rtems/clockdrv.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER + #include <rtems/timerdrv.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER + #include <rtems/rtc.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER + #include <rtems/watchdogdrv.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER + #include <rtems/framebuffer.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER + #include <rtems/devnull.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER + /* the ide driver needs the ATA driver */ + #ifndef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER + #define CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER + #endif + #include <libchip/ide_ctrl.h> +#endif + +#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER + #include <libchip/ata.h> +#endif + +#ifndef CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE + +#ifdef CONFIGURE_INIT + rtems_driver_address_table Device_drivers[] = { + #ifdef CONFIGURE_BSP_PREREQUISITE_DRIVERS + CONFIGURE_BSP_PREREQUISITE_DRIVERS, + #endif + #ifdef CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS + CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER + CONSOLE_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER + CLOCK_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER + RTC_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER + WATCHDOG_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER + DEVNULL_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER + IDE_CONTROLLER_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER + ATA_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER + FRAME_BUFFER_DRIVER_TABLE_ENTRY, + #endif + #ifdef CONFIGURE_APPLICATION_EXTRA_DRIVERS + CONFIGURE_APPLICATION_EXTRA_DRIVERS, + #endif + #ifdef CONFIGURE_APPLICATION_NEEDS_NULL_DRIVER + NULL_DRIVER_TABLE_ENTRY + #elif !defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_EXTRA_DRIVERS) + NULL_DRIVER_TABLE_ENTRY + #endif + }; +#endif + +#endif /* CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE */ + +/* + * Default the number of drivers per node. This value may be + * overridden by the user. + */ + +#define CONFIGURE_NUMBER_OF_DRIVERS \ + ((sizeof(Device_drivers) / sizeof(rtems_driver_address_table))) + +/** + * This specifies the maximum number of device drivers that + * can be installed in the system at one time. It must account + * for both the statically and dynamically installed drivers. + */ +#ifndef CONFIGURE_MAXIMUM_DRIVERS + #define CONFIGURE_MAXIMUM_DRIVERS CONFIGURE_NUMBER_OF_DRIVERS +#endif + + +#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER + /* + * configure the priority of the ATA driver task + */ + #ifndef CONFIGURE_ATA_DRIVER_TASK_PRIORITY + #define CONFIGURE_ATA_DRIVER_TASK_PRIORITY ATA_DRIVER_TASK_DEFAULT_PRIORITY + #endif + #ifdef CONFIGURE_INIT + rtems_task_priority rtems_ata_driver_task_priority + = CONFIGURE_ATA_DRIVER_TASK_PRIORITY; + #endif /* CONFIGURE_INIT */ +#endif + +/* + * add bdbuf configuration and values for swapout task priority + */ +#ifdef CONFIGURE_APPLICATION_NEEDS_LIBBLOCK + #include <rtems/bdbuf.h> + /* + * configure the bdbuf cache parameters + */ + #ifndef CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS + #define CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS \ + RTEMS_BDBUF_MAX_READ_AHEAD_BLOCKS_DEFAULT + #endif + #ifndef CONFIGURE_BDBUF_MAX_WRITE_BLOCKS + #define CONFIGURE_BDBUF_MAX_WRITE_BLOCKS \ + RTEMS_BDBUF_MAX_WRITE_BLOCKS_DEFAULT + #endif + #ifndef CONFIGURE_SWAPOUT_TASK_PRIORITY + #define CONFIGURE_SWAPOUT_TASK_PRIORITY \ + RTEMS_BDBUF_SWAPOUT_TASK_PRIORITY_DEFAULT + #endif + #ifndef CONFIGURE_SWAPOUT_SWAP_PERIOD + #define CONFIGURE_SWAPOUT_SWAP_PERIOD \ + RTEMS_BDBUF_SWAPOUT_TASK_SWAP_PERIOD_DEFAULT + #endif + #ifndef CONFIGURE_SWAPOUT_BLOCK_HOLD + #define CONFIGURE_SWAPOUT_BLOCK_HOLD \ + RTEMS_BDBUF_SWAPOUT_TASK_BLOCK_HOLD_DEFAULT + #endif + #ifndef CONFIGURE_SWAPOUT_WORKER_TASKS + #define CONFIGURE_SWAPOUT_WORKER_TASKS \ + RTEMS_BDBUF_SWAPOUT_WORKER_TASKS_DEFAULT + #endif + #ifndef CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY + #define CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY \ + RTEMS_BDBUF_SWAPOUT_WORKER_TASK_PRIORITY_DEFAULT + #endif + #ifndef CONFIGURE_BDBUF_CACHE_MEMORY_SIZE + #define CONFIGURE_BDBUF_CACHE_MEMORY_SIZE \ + RTEMS_BDBUF_CACHE_MEMORY_SIZE_DEFAULT + #endif + #ifndef CONFIGURE_BDBUF_BUFFER_MIN_SIZE + #define CONFIGURE_BDBUF_BUFFER_MIN_SIZE \ + RTEMS_BDBUF_BUFFER_MIN_SIZE_DEFAULT + #endif + #ifndef CONFIGURE_BDBUF_BUFFER_MAX_SIZE + #define CONFIGURE_BDBUF_BUFFER_MAX_SIZE \ + RTEMS_BDBUF_BUFFER_MAX_SIZE_DEFAULT + #endif + #ifdef CONFIGURE_INIT + const rtems_bdbuf_config rtems_bdbuf_configuration = { + CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS, + CONFIGURE_BDBUF_MAX_WRITE_BLOCKS, + CONFIGURE_SWAPOUT_TASK_PRIORITY, + CONFIGURE_SWAPOUT_SWAP_PERIOD, + CONFIGURE_SWAPOUT_BLOCK_HOLD, + CONFIGURE_SWAPOUT_WORKER_TASKS, + CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY, + CONFIGURE_BDBUF_CACHE_MEMORY_SIZE, + CONFIGURE_BDBUF_BUFFER_MIN_SIZE, + CONFIGURE_BDBUF_BUFFER_MAX_SIZE + }; + #endif + + /* + * Semaphores: + * o disk lock + * o bdbuf lock + * o bdbuf sync lock + * o bdbuf access condition + * o bdbuf transfer condition + * o bdbuf buffer condition + */ + #define CONFIGURE_LIBBLOCK_SEMAPHORES 6 + + #if defined(CONFIGURE_HAS_OWN_BDBUF_TABLE) || \ + defined(CONFIGURE_BDBUF_BUFFER_SIZE) || \ + defined(CONFIGURE_BDBUF_BUFFER_COUNT) + #error BDBUF Cache does not use a buffer configuration table. Please remove. + #endif +#else + #define CONFIGURE_LIBBLOCK_SEMAPHORES 0 +#endif /* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK */ + +#if defined(RTEMS_MULTIPROCESSING) + /* + * Default Multiprocessing Configuration Table. The defaults are + * appropriate for most of the RTEMS Multiprocessor Test Suite. Each + * value may be overridden within each test to customize the environment. + */ + + #ifdef CONFIGURE_MP_APPLICATION + #define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 1 + + #ifndef CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE + + #ifndef CONFIGURE_MP_NODE_NUMBER + #define CONFIGURE_MP_NODE_NUMBER NODE_NUMBER + #endif + + #ifndef CONFIGURE_MP_MAXIMUM_NODES + #define CONFIGURE_MP_MAXIMUM_NODES 2 + #endif + + #ifndef CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS + #define CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS 32 + #endif + #define CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS(_global_objects) \ + _Configure_Object_RAM((_global_objects), sizeof(Objects_MP_Control)) + + #ifndef CONFIGURE_MP_MAXIMUM_PROXIES + #define CONFIGURE_MP_MAXIMUM_PROXIES 32 + #endif + #define CONFIGURE_MEMORY_FOR_PROXIES(_proxies) \ + _Configure_Object_RAM((_proxies) + 1, sizeof(Thread_Proxy_control) ) + + #ifndef CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK + #define CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK 0 + #endif + + #ifndef CONFIGURE_MP_MPCI_TABLE_POINTER + #include <mpci.h> + #define CONFIGURE_MP_MPCI_TABLE_POINTER &MPCI_table + #endif + + #ifdef CONFIGURE_INIT + rtems_multiprocessing_table Multiprocessing_configuration = { + CONFIGURE_MP_NODE_NUMBER, /* local node number */ + CONFIGURE_MP_MAXIMUM_NODES, /* maximum # nodes */ + CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS, /* maximum # global objects */ + CONFIGURE_MP_MAXIMUM_PROXIES, /* maximum # proxies */ + CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK, /* MPCI stack > minimum */ + CONFIGURE_MP_MPCI_TABLE_POINTER /* ptr to MPCI config table */ + }; + #endif + + #define CONFIGURE_MULTIPROCESSING_TABLE &Multiprocessing_configuration + + #endif /* CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE */ + + #else + + #define CONFIGURE_MULTIPROCESSING_TABLE NULL + + #endif /* CONFIGURE_MP_APPLICATION */ +#endif /* RTEMS_MULTIPROCESSING */ + +#ifndef CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER + #define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 0 +#endif + + +/* + * Default Configuration Table. + */ + +#ifndef CONFIGURE_HAS_OWN_CONFIGURATION_TABLE + + #ifndef CONFIGURE_MAXIMUM_TASKS + #define CONFIGURE_MAXIMUM_TASKS 0 + #endif + + #ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS + #define CONFIGURE_NOTEPADS_ENABLED TRUE + #else + #define CONFIGURE_NOTEPADS_ENABLED FALSE + #endif + + #ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS + #define CONFIGURE_MEMORY_PER_TASK_FOR_CLASSIC_API \ + _Configure_From_workspace( sizeof(RTEMS_API_Control) ) + #else + #define CONFIGURE_MEMORY_PER_TASK_FOR_CLASSIC_API \ + _Configure_From_workspace( sizeof(RTEMS_API_Control) - \ + (RTEMS_NUMBER_NOTEPADS * sizeof(uint32_t))) + #endif + + /** + * This macro calculates the memory required for task variables. + * + * @note Each task variable is individually allocated from the Workspace. + * Hence, we do the multiplication on the configured size. + */ + #ifndef CONFIGURE_MAXIMUM_TASK_VARIABLES + #define CONFIGURE_MAXIMUM_TASK_VARIABLES 0 + #define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) 0 + #else + #define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) \ + (_task_variables) * \ + _Configure_From_workspace(sizeof(rtems_task_variable_t)) + #endif + + #ifndef CONFIGURE_MAXIMUM_TIMERS + #define CONFIGURE_MAXIMUM_TIMERS 0 + #define CONFIGURE_MEMORY_FOR_TIMERS(_timers) 0 + #else + #define CONFIGURE_MEMORY_FOR_TIMERS(_timers) \ + _Configure_Object_RAM(_timers, sizeof(Timer_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_SEMAPHORES + #define CONFIGURE_MAXIMUM_SEMAPHORES 0 + #endif + + #define CONFIGURE_SEMAPHORES \ + (CONFIGURE_MAXIMUM_SEMAPHORES + CONFIGURE_LIBIO_SEMAPHORES + \ + CONFIGURE_TERMIOS_SEMAPHORES + CONFIGURE_LIBBLOCK_SEMAPHORES + \ + CONFIGURE_SEMAPHORES_FOR_FIFOS) + + /* + * If there are no user or support semaphores defined, then we can assume + * that no memory need be allocated at all for semaphores. + */ + #if CONFIGURE_SEMAPHORES == 0 + #define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) 0 + #else + #define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) \ + _Configure_Object_RAM(_semaphores, sizeof(Semaphore_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_MESSAGE_QUEUES + #define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 0 + #define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) 0 + #else + #define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) \ + _Configure_Object_RAM(_queues, sizeof(Message_queue_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_PARTITIONS + #define CONFIGURE_MAXIMUM_PARTITIONS 0 + #define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) 0 + #else + #define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) \ + _Configure_Object_RAM(_partitions, sizeof(Partition_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_REGIONS + #define CONFIGURE_MAXIMUM_REGIONS 0 + #define CONFIGURE_MEMORY_FOR_REGIONS(_regions) 0 + #else + #define CONFIGURE_MEMORY_FOR_REGIONS(_regions) \ + _Configure_Object_RAM(_regions, sizeof(Region_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_PORTS + #define CONFIGURE_MAXIMUM_PORTS 0 + #define CONFIGURE_MEMORY_FOR_PORTS(_ports) 0 + #else + #define CONFIGURE_MEMORY_FOR_PORTS(_ports) \ + _Configure_Object_RAM(_ports, sizeof(Dual_ported_memory_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_PERIODS + #define CONFIGURE_MAXIMUM_PERIODS 0 + #define CONFIGURE_MEMORY_FOR_PERIODS(_periods) 0 + #else + #define CONFIGURE_MEMORY_FOR_PERIODS(_periods) \ + _Configure_Object_RAM(_periods, sizeof(Rate_monotonic_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_BARRIERS + #define CONFIGURE_MAXIMUM_BARRIERS 0 + #endif + + #define CONFIGURE_BARRIERS \ + (CONFIGURE_MAXIMUM_BARRIERS + CONFIGURE_BARRIERS_FOR_FIFOS) + + #if CONFIGURE_BARRIERS == 0 + #define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) 0 + #else + #define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) \ + _Configure_Object_RAM(_barriers, sizeof(Barrier_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_USER_EXTENSIONS + #define CONFIGURE_MAXIMUM_USER_EXTENSIONS 0 + #define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) 0 + #else + #define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) \ + _Configure_Object_RAM(_extensions, sizeof(Extension_Control) ) + #endif + + #ifndef CONFIGURE_MICROSECONDS_PER_TICK + #define CONFIGURE_MICROSECONDS_PER_TICK \ + RTEMS_MILLISECONDS_TO_MICROSECONDS(10) + #endif + + #ifndef CONFIGURE_TICKS_PER_TIMESLICE + #define CONFIGURE_TICKS_PER_TIMESLICE 50 + #endif + +/* + * Initial Extension Set + */ + +#ifdef CONFIGURE_INIT +#ifdef CONFIGURE_STACK_CHECKER_ENABLED +#include <rtems/stackchk.h> +#endif +#include <rtems/libcsupport.h> + +#if defined(CONFIGURE_INITIAL_EXTENSIONS) || \ + defined(CONFIGURE_STACK_CHECKER_ENABLED) || \ + (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)) + rtems_extensions_table Configuration_Initial_Extensions[] = { + #if !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY) + RTEMS_NEWLIB_EXTENSION, + #endif + #if defined(CONFIGURE_STACK_CHECKER_ENABLED) + RTEMS_STACK_CHECKER_EXTENSION, + #endif + #if defined(CONFIGURE_INITIAL_EXTENSIONS) + CONFIGURE_INITIAL_EXTENSIONS, + #endif + }; + + #define CONFIGURE_INITIAL_EXTENSION_TABLE Configuration_Initial_Extensions + #define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \ + ((sizeof(Configuration_Initial_Extensions) / \ + sizeof(rtems_extensions_table))) +#else + #define CONFIGURE_INITIAL_EXTENSION_TABLE NULL + #define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS 0 +#endif + + +#endif + +/* + * POSIX API Configuration Parameters + */ + +#ifdef RTEMS_POSIX_API + + #include <sys/types.h> + #include <signal.h> + #include <limits.h> + #include <mqueue.h> + #include <rtems/posix/barrier.h> + #include <rtems/posix/cond.h> + #include <rtems/posix/mqueue.h> + #include <rtems/posix/mutex.h> + #include <rtems/posix/key.h> + #include <rtems/posix/psignal.h> + #include <rtems/posix/rwlock.h> + #include <rtems/posix/semaphore.h> + #include <rtems/posix/spinlock.h> + #include <rtems/posix/threadsup.h> + #include <rtems/posix/timer.h> + + /** + * Account for the object control structures plus the name + * of the object to be duplicated. + */ + #define _Configure_POSIX_Named_Object_RAM(_number, _size) \ + _Configure_Object_RAM( (_number), _size ) + \ + ((_number) + _Configure_From_workspace(NAME_MAX) ) + + #ifndef CONFIGURE_MAXIMUM_POSIX_THREADS + #define CONFIGURE_MAXIMUM_POSIX_THREADS 0 + #endif + + #define CONFIGURE_MEMORY_PER_TASK_FOR_POSIX_API \ + _Configure_From_workspace( \ + CONFIGURE_MINIMUM_TASK_STACK_SIZE + \ + sizeof (POSIX_API_Control) + \ + (sizeof (void *) * (CONFIGURE_MAXIMUM_POSIX_KEYS)) \ + ) + + #ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES + #define CONFIGURE_MAXIMUM_POSIX_MUTEXES 0 + #define CONFIGURE_MEMORY_FOR_POSIX_MUTEXES(_mutexes) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_MUTEXES(_mutexes) \ + _Configure_Object_RAM(_mutexes, sizeof(POSIX_Mutex_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + #define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES 0 + #define CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(_condvars) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(_condvars) \ + _Configure_Object_RAM(_condvars, \ + sizeof(POSIX_Condition_variables_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_KEYS + #define CONFIGURE_MAXIMUM_POSIX_KEYS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_KEYS(_keys) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_KEYS(_keys) \ + _Configure_Object_RAM(_keys, sizeof(POSIX_Keys_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_TIMERS + #define CONFIGURE_MAXIMUM_POSIX_TIMERS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_TIMERS(_timers) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_TIMERS(_timers) \ + _Configure_Object_RAM(_timers, sizeof(POSIX_Timer_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS + #define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(_queued_signals) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(_queued_signals) \ + _Configure_From_workspace( \ + (_queued_signals) * (sizeof(POSIX_signals_Siginfo_node)) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES + #define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES 0 + #define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(_message_queues) 0 + #define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS(_fds) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(_message_queues) \ + _Configure_POSIX_Named_Object_RAM( \ + _message_queues, sizeof(POSIX_Message_queue_Control) ) + + /* default to same number */ + #ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS + #define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS \ + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES + #endif + + #define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS(_mqueue_fds) \ + _Configure_POSIX_Named_Object_RAM( \ + _mqueue_fds, sizeof(POSIX_Message_queue_Control_fd) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_SEMAPHORES + #define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES 0 + #define CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES(_semaphores) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES(_semaphores) \ + _Configure_POSIX_Named_Object_RAM( \ + _semaphores, sizeof(POSIX_Semaphore_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_BARRIERS + #define CONFIGURE_MAXIMUM_POSIX_BARRIERS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(_barriers) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(_barriers) \ + _Configure_Object_RAM(_barriers, sizeof(POSIX_Barrier_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_SPINLOCKS + #define CONFIGURE_MAXIMUM_POSIX_SPINLOCKS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS(_spinlocks) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS(_spinlocks) \ + _Configure_Object_RAM(_spinlocks, sizeof(POSIX_Spinlock_Control) ) + #endif + + #ifndef CONFIGURE_MAXIMUM_POSIX_RWLOCKS + #define CONFIGURE_MAXIMUM_POSIX_RWLOCKS 0 + #define CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS(_rwlocks) 0 + #else + #define CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS(_rwlocks) \ + _Configure_Object_RAM(_rwlocks, sizeof(POSIX_RWLock_Control) ) + #endif + + #ifdef CONFIGURE_POSIX_INIT_THREAD_TABLE + + #ifdef CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE + + /* + * The user is defining their own table information and setting the + * appropriate variables for the POSIX Initialization Thread Table. + */ + + #else + + #ifndef CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT + #define CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT POSIX_Init + #endif + + #ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE + #define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE \ + (CONFIGURE_MINIMUM_TASK_STACK_SIZE * 2) + #endif + + #ifdef CONFIGURE_INIT + posix_initialization_threads_table POSIX_Initialization_threads[] = { + { CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT, \ + CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE } + }; + #endif + + #define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME \ + POSIX_Initialization_threads + + #define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE \ + sizeof(CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME) / \ + sizeof(posix_initialization_threads_table) + + #endif /* CONFIGURE_POSIX_HAS_OWN_INIT_TASK_TABLE */ + + #else /* CONFIGURE_POSIX_INIT_THREAD_TABLE */ + + #define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME NULL + #define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE 0 + + #endif + + #define CONFIGURE_MEMORY_FOR_POSIX \ + ( CONFIGURE_MEMORY_FOR_POSIX_MUTEXES( CONFIGURE_MAXIMUM_POSIX_MUTEXES + \ + CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_MUTEXES) + \ + CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES( \ + CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + \ + CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_CONDITION_VARIABLES) + \ + CONFIGURE_MEMORY_FOR_POSIX_KEYS( CONFIGURE_MAXIMUM_POSIX_KEYS ) + \ + CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS( \ + CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ) + \ + CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES( \ + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ) + \ + CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS( \ + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS ) + \ + CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( \ + CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ) + \ + CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(CONFIGURE_MAXIMUM_POSIX_BARRIERS) + \ + CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( \ + CONFIGURE_MAXIMUM_POSIX_SPINLOCKS ) + \ + CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( \ + CONFIGURE_MAXIMUM_POSIX_RWLOCKS ) + \ + CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ) + \ + (CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE) \ + ) +#else + + #define CONFIGURE_MAXIMUM_POSIX_THREADS 0 + #define CONFIGURE_MEMORY_PER_TASK_FOR_POSIX_API 0 + #define CONFIGURE_MEMORY_FOR_POSIX 0 + +#endif /* RTEMS_POSIX_API */ + +#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE + #define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE 0 +#endif + +/* + * This block of defines are for applications which use GNAT/RTEMS. + * GNAT implements each Ada task as a POSIX thread. + */ +#ifdef CONFIGURE_GNAT_RTEMS + + /** + * The GNAT run-time needs something less than (10) POSIX mutexes. + * We may be able to get by with less but why bother. + */ + #define CONFIGURE_GNAT_MUTEXES 10 + + /** + * This is the maximum number of Ada tasks which can be concurrently + * in existence. Twenty (20) are required to run all tests in the + * ACATS (formerly ACVC). + */ + #ifndef CONFIGURE_MAXIMUM_ADA_TASKS + #define CONFIGURE_MAXIMUM_ADA_TASKS 20 + #endif + + /** + * This is the number of non-Ada tasks which invoked Ada code. + */ + #ifndef CONFIGURE_MAXIMUM_FAKE_ADA_TASKS + #define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0 + #endif + + /** + * Ada tasks are allocated twice the minimum stack space. + */ + #define CONFIGURE_ADA_TASKS_STACK \ + (CONFIGURE_MAXIMUM_ADA_TASKS * \ + (CONFIGURE_MINIMUM_TASK_STACK_SIZE + (6 * 1024))) + +#else + #define CONFIGURE_GNAT_MUTEXES 0 + #define CONFIGURE_MAXIMUM_ADA_TASKS 0 + #define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0 + #define CONFIGURE_ADA_TASKS_STACK 0 +#endif + +#ifdef CONFIGURE_ENABLE_GO + + #ifndef CONFIGURE_MAXIMUM_POSIX_THREADS + #define CONFIGURE_MAXIMUM_POSIX_THREADS 1 + #endif + #ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES + #define CONFIGURE_MAXIMUM_POSIX_MUTEXES 1 + #endif + #ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + #define CONFIGURE_MAXIMUM_CONDITION_VARIABLES 1 + #endif + + #define CONFIGURE_GO_INIT_MUTEXES 77 + #define CONFIGURE_GO_INIT_CONDITION_VARIABLES 4 + + #ifndef CONFIGURE_MAXIMUM_GOROUTINES + #define CONFIGURE_MAXIMUM_GOROUTINES 400 + #endif + + #define CONFIGURE_GOROUTINES_TASK_VARIABLES \ + (2 * CONFIGURE_MAXIMUM_GOROUTINES) + + #ifndef CONFIGURE_MAXIMUM_GO_CHANNELS + #define CONFIGURE_MAXIMUM_GO_CHANNELS 500 + #endif + +#else + #define CONFIGURE_GO_INIT_MUTEXES 0 + #define CONFIGURE_GO_INIT_CONDITION_VARIABLES 0 + #define CONFIGURE_MAXIMUM_GOROUTINES 0 + #define CONFIGURE_GOROUTINES_TASK_VARIABLES 0 + #define CONFIGURE_MAXIMUM_GO_CHANNELS 0 +#endif + +#ifndef RTEMS_SCHEDSIM +/** + * This macro specifies the amount of memory to be reserved for the + * Newlib C Library reentrancy structure -- if we are using newlib. + */ + +#if (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)) + #include <reent.h> + + #define CONFIGURE_MEMORY_PER_TASK_FOR_NEWLIB \ + _Configure_From_workspace(sizeof(struct _reent)) +#else + #define CONFIGURE_MEMORY_PER_TASK_FOR_NEWLIB 0 +#endif + +#else + #define CONFIGURE_MEMORY_PER_TASK_FOR_NEWLIB 0 +#endif + + +/* + * Calculate the RAM size based on the maximum number of objects configured. + */ + +#ifndef CONFIGURE_EXECUTIVE_RAM_SIZE + +/** + * Account for allocating the following per object + * + array of object control structures + * + local pointer table -- pointer per object plus a zero'th + * entry in the local pointer table. + */ + +#define CONFIGURE_MEMORY_FOR_TASKS(_tasks, _number_FP_tasks) \ + ( \ + _Configure_Object_RAM(_tasks, sizeof(Thread_Control)) + \ + (_Configure_Max_Objects(_tasks) * \ + (_Configure_From_workspace(CONFIGURE_MINIMUM_TASK_STACK_SIZE) + \ + CONFIGURE_MEMORY_PER_TASK_FOR_CLASSIC_API + \ + CONFIGURE_MEMORY_PER_TASK_FOR_NEWLIB + \ + CONFIGURE_MEMORY_PER_TASK_FOR_POSIX_API + \ + CONFIGURE_MEMORY_PER_TASK_FOR_SCHEDULER)) + \ + _Configure_From_workspace( \ + _Configure_Max_Objects(_number_FP_tasks) * CONTEXT_FP_SIZE) + \ + _Configure_From_workspace( \ + (CONFIGURE_MAXIMUM_USER_EXTENSIONS + 1) * sizeof(void *)) \ + ) + +/** + * This defines the amount of memory configured for the multiprocessing + * support required by this application. + */ +#ifdef CONFIGURE_MP_APPLICATION + #define CONFIGURE_MEMORY_FOR_MP \ + (CONFIGURE_MEMORY_FOR_PROXIES(CONFIGURE_MP_MAXIMUM_PROXIES) + \ + CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS( \ + CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS) + \ + CONFIGURE_MEMORY_FOR_TASKS(1, 1) + \ + CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK \ + ) +#else + #define CONFIGURE_MEMORY_FOR_MP 0 +#endif + +/** + * This is so we can account for tasks with stacks greater than minimum + * size. This is in bytes. + */ +#ifndef CONFIGURE_EXTRA_TASK_STACKS + #define CONFIGURE_EXTRA_TASK_STACKS 0 +#endif + +/** + * The following macro is used to calculate the memory allocated by RTEMS + * for the message buffers associated with a particular message queue. + * There is a fixed amount of overhead per message. + */ +#define CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE(_messages, _size) \ + _Configure_From_workspace( \ + (_messages) * ((_size) + sizeof(CORE_message_queue_Buffer_control))) + +/** + * This macros is set to the amount of memory required for pending message + * buffers in bytes. It should be constructed by adding together a + * set of values determined by CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE. + */ +#ifndef CONFIGURE_MESSAGE_BUFFER_MEMORY + #define CONFIGURE_MESSAGE_BUFFER_MEMORY 0 +#endif + +/** + * This macro is available just in case the confdefs.h file underallocates + * memory for a particular application. This lets the user add some extra + * memory in case something broken and underestimates. + * + * It is also possible for cases where confdefs.h overallocates memory, + * you could substract memory from the allocated. The estimate is just + * that, an estimate, and assumes worst case alignment and padding on + * each allocated element. So in some cases it could be too conservative. + * + * @note Historically this was used for message buffers. + */ +#ifndef CONFIGURE_MEMORY_OVERHEAD + #define CONFIGURE_MEMORY_OVERHEAD 0 +#endif + +/** + * On architectures that use Simple Vectored Interrupts, it is RTEMS + * responsibility to allocate the vector table. This avoids reserving + * the memory on architectures that use the Programmable Interrupt + * Controller Vectored Interrupts. + */ +#if (CPU_SIMPLE_VECTORED_INTERRUPTS == TRUE) + /* + * This is a (hopefully) temporary hack. On the mips, the number of + * vectors is NOT statically defined. But it has to be statically + * defined for this to work. This is an issue looking for a nice + * solution. + */ + #if defined(__mips__) + #define CONFIGURE_INTERRUPT_VECTOR_TABLE \ + _Configure_From_workspace( (sizeof(ISR_Handler_entry) * 256)) + #else + #define CONFIGURE_INTERRUPT_VECTOR_TABLE \ + _Configure_From_workspace( \ + (sizeof(ISR_Handler_entry) * ISR_NUMBER_OF_VECTORS)) + #endif +#else + #define CONFIGURE_INTERRUPT_VECTOR_TABLE 0 +#endif + +/** + * RTEMS uses one instance of an internal mutex class. This accounts + * for that mutex + */ +#define CONFIGURE_API_MUTEX_MEMORY \ + _Configure_Object_RAM(1, sizeof(API_Mutex_Control)) + +/** + * This defines the formula used to compute the amount of memory + * reserved for IDLE task control structures and stacks. + */ +#define CONFIGURE_IDLE_TASKS(_count) \ + (CONFIGURE_MEMORY_FOR_TASKS(_count, 0) + \ + _count * _Configure_From_workspace( \ + (CONFIGURE_IDLE_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE))) + +/** + * This calculates the amount of memory reserved for the IDLE tasks. + * In an SMP system, each CPU core has its own idle task. + */ +#if defined(RTEMS_SMP) + #define CONFIGURE_MEMORY_FOR_IDLE_TASK \ + CONFIGURE_IDLE_TASKS(CONFIGURE_SMP_MAXIMUM_PROCESSORS) +#else + #define CONFIGURE_MEMORY_FOR_IDLE_TASK \ + CONFIGURE_IDLE_TASKS(1) +#endif + +/** + * This macro accounts for general RTEMS system overhead. + */ +#define CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD \ + ( CONFIGURE_MEMORY_FOR_IDLE_TASK + /* IDLE and stack */ \ + CONFIGURE_MEMORY_FOR_SCHEDULER + /* Scheduler */ \ + CONFIGURE_INTERRUPT_VECTOR_TABLE + /* interrupt vectors */ \ + CONFIGURE_INTERRUPT_STACK_MEMORY + /* interrupt stack */ \ + CONFIGURE_API_MUTEX_MEMORY /* allocation mutex */ \ + ) + +/* + * Now account for any extra memory that initialization tasks or threads + * may have requested. + */ + +/** + * This accounts for any extra memory required by the Classic API + * Initialization Task. + */ +#if (CONFIGURE_INIT_TASK_STACK_SIZE > CONFIGURE_MINIMUM_TASK_STACK_SIZE) + #define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART \ + (CONFIGURE_INIT_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE) +#else + #define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART 0 +#endif + +/** + * This accounts for any extra memory required by the POSIX API + * Initialization Thread. + */ +#if defined(RTEMS_POSIX_API) && \ + (CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE > CONFIGURE_MINIMUM_TASK_STACK_SIZE) + #define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART \ + (CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE) +#else + #define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART 0 +#endif + +/** + * This macro provides a summation of the various initialization task + * and thread stack requirements. + */ +#define CONFIGURE_INITIALIZATION_THREADS_STACKS \ + (CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART + \ + CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART) + +/** + * This macro provides a summation of the various task and thread + * requirements. + */ +#define CONFIGURE_TOTAL_TASKS_AND_THREADS \ + (CONFIGURE_MAXIMUM_TASKS + \ + CONFIGURE_MAXIMUM_POSIX_THREADS + CONFIGURE_MAXIMUM_ADA_TASKS + \ + CONFIGURE_MAXIMUM_GOROUTINES) + +/** + * This macro reserves the memory required by the statically configured + * user extensions. + */ +#define CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS \ + ((CONFIGURE_NEWLIB_EXTENSION * \ + _Configure_From_workspace( sizeof(User_extensions_Control))) + \ + (CONFIGURE_STACK_CHECKER_EXTENSION * \ + _Configure_From_workspace( sizeof(User_extensions_Control))) \ + ) + +/** + * This macro provides a summation of the memory required by the + * Classic API as configured. + */ +#define CONFIGURE_MEMORY_FOR_CLASSIC \ + (CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES + \ + CONFIGURE_GOROUTINES_TASK_VARIABLES) + \ + CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS + \ + CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER ) + \ + CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES) + \ + CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES) + \ + CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS) + \ + CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ) + \ + CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS) + \ + CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS) + \ + CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS) + \ + CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS) \ + ) + +#if defined(RTEMS_SMP) + #define CONFIGURE_MEMORY_FOR_SMP \ + (CONFIGURE_SMP_MAXIMUM_PROCESSORS * \ + _Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE ) \ + ) +#else + #define CONFIGURE_MEMORY_FOR_SMP 0 +#endif + +#if defined(CONFIGURE_CONFDEFS_DEBUG) && defined(CONFIGURE_INIT) + /** + * This is a debug mechanism, so if you need to, the executable will + * have a structure with various partial values. Add to this as you + * need to. Viewing this structure in gdb combined with dumping + * the Configuration structures generated should help a lot in tracing + * down errors and analyzing where over and under allocations are. + */ + typedef struct { + uint32_t SYSTEM_OVERHEAD; + uint32_t STATIC_EXTENSIONS; + uint32_t INITIALIZATION_THREADS_STACKS; + + uint32_t PER_INTEGER_TASK; + uint32_t FP_OVERHEAD; + uint32_t CLASSIC; + uint32_t POSIX; + + /* System overhead pieces */ + uint32_t INTERRUPT_VECTOR_TABLE; + uint32_t INTERRUPT_STACK_MEMORY; + uint32_t THREAD_READY_CHAINS; + uint32_t MEMORY_FOR_IDLE_TASK; + + /* Classic API Pieces */ + uint32_t CLASSIC_TASKS; + uint32_t TASK_VARIABLES; + uint32_t TIMERS; + uint32_t SEMAPHORES; + uint32_t MESSAGE_QUEUES; + uint32_t PARTITIONS; + uint32_t REGIONS; + uint32_t PORTS; + uint32_t PERIODS; + uint32_t BARRIERS; + uint32_t USER_EXTENSIONS; +#ifdef RTEMS_POSIX_API + /* POSIX API Pieces */ + uint32_t POSIX_MUTEXES; + uint32_t POSIX_CONDITION_VARIABLES; + uint32_t POSIX_KEYS; + uint32_t POSIX_TIMERS; + uint32_t POSIX_QUEUED_SIGNALS; + uint32_t POSIX_MESSAGE_QUEUES; + uint32_t POSIX_SEMAPHORES; + uint32_t POSIX_BARRIERS; + uint32_t POSIX_SPINLOCKS; + uint32_t POSIX_RWLOCKS; +#endif + } Configuration_Debug_t; + + Configuration_Debug_t Configuration_Memory_Debug = { + /* General Information */ + CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD, + CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS, + CONFIGURE_INITIALIZATION_THREADS_STACKS, + CONFIGURE_MEMORY_FOR_TASKS(1, 0), + CONFIGURE_MEMORY_FOR_TASKS(0, 1), + CONFIGURE_MEMORY_FOR_CLASSIC, + CONFIGURE_MEMORY_FOR_POSIX, + + /* System overhead pieces */ + CONFIGURE_INTERRUPT_VECTOR_TABLE, + CONFIGURE_INTERRUPT_STACK_MEMORY, + CONFIGURE_MEMORY_FOR_THREAD_READY_CHAINS, + CONFIGURE_MEMORY_FOR_IDLE_TASK, + + /* Classic API Pieces */ + CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_MAXIMUM_TASKS, 0), + CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES + + CONFIGURE_GOROUTINES_TASK_VARIABLES), + CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS), + CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES), + CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES), + CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS), + CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ), + CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS), + CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS), + CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS), + CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS), + +#ifdef RTEMS_POSIX_API + /* POSIX API Pieces */ + CONFIGURE_MEMORY_FOR_POSIX_MUTEXES( CONFIGURE_MAXIMUM_POSIX_MUTEXES + + CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_MUTEXES), + CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES( + CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + + CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_CONDITION_VARIABLES), + CONFIGURE_MEMORY_FOR_POSIX_KEYS( CONFIGURE_MAXIMUM_POSIX_KEYS ), + CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS( + CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ), + CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES( + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ), + CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ), + CONFIGURE_MEMORY_FOR_POSIX_BARRIERS( CONFIGURE_MAXIMUM_POSIX_BARRIERS ), + CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( CONFIGURE_MAXIMUM_POSIX_SPINLOCKS ), + CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( CONFIGURE_MAXIMUM_POSIX_RWLOCKS ), + CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ), +#endif + }; +#endif + +/** + * This calculates the memory required for the executive workspace. + */ +#define CONFIGURE_EXECUTIVE_RAM_SIZE \ +(( \ + CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD + \ + CONFIGURE_MEMORY_FOR_DEVFS + \ + CONFIGURE_MEMORY_FOR_TASKS( \ + CONFIGURE_TOTAL_TASKS_AND_THREADS, CONFIGURE_TOTAL_TASKS_AND_THREADS) + \ + CONFIGURE_MEMORY_FOR_CLASSIC + \ + CONFIGURE_MEMORY_FOR_POSIX + \ + (CONFIGURE_MAXIMUM_POSIX_THREADS * CONFIGURE_MINIMUM_TASK_STACK_SIZE ) + \ + (CONFIGURE_MAXIMUM_GOROUTINES * CONFIGURE_MINIMUM_TASK_STACK_SIZE) + \ + CONFIGURE_INITIALIZATION_THREADS_STACKS + \ + CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS + \ + CONFIGURE_MEMORY_FOR_MP + \ + CONFIGURE_MEMORY_FOR_SMP + \ + CONFIGURE_MESSAGE_BUFFER_MEMORY + \ + (CONFIGURE_MEMORY_OVERHEAD * 1024) + \ + (CONFIGURE_EXTRA_TASK_STACKS) + (CONFIGURE_ADA_TASKS_STACK) \ +) & ~0x7) +#endif + +#ifdef CONFIGURE_INIT + /** + * This is the Classic API Configuration Table. + */ + rtems_api_configuration_table Configuration_RTEMS_API = { + CONFIGURE_MAXIMUM_TASKS, + CONFIGURE_NOTEPADS_ENABLED, + CONFIGURE_MAXIMUM_TIMERS + CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER, + CONFIGURE_SEMAPHORES, + CONFIGURE_MAXIMUM_MESSAGE_QUEUES, + CONFIGURE_MAXIMUM_PARTITIONS, + CONFIGURE_MAXIMUM_REGIONS, + CONFIGURE_MAXIMUM_PORTS, + CONFIGURE_MAXIMUM_PERIODS, + CONFIGURE_BARRIERS, + CONFIGURE_INIT_TASK_TABLE_SIZE, + CONFIGURE_INIT_TASK_TABLE + }; + + #ifdef RTEMS_POSIX_API + /** + * This is the POSIX API Configuration Table. + */ + posix_api_configuration_table Configuration_POSIX_API = { + CONFIGURE_MAXIMUM_POSIX_THREADS + CONFIGURE_MAXIMUM_ADA_TASKS + + CONFIGURE_MAXIMUM_GOROUTINES, + CONFIGURE_MAXIMUM_POSIX_MUTEXES + CONFIGURE_GNAT_MUTEXES + + CONFIGURE_MAXIMUM_ADA_TASKS + CONFIGURE_MAXIMUM_FAKE_ADA_TASKS + + CONFIGURE_GO_INIT_MUTEXES + CONFIGURE_MAXIMUM_GO_CHANNELS, + CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + + CONFIGURE_MAXIMUM_ADA_TASKS + CONFIGURE_MAXIMUM_FAKE_ADA_TASKS + + CONFIGURE_GO_INIT_CONDITION_VARIABLES + CONFIGURE_MAXIMUM_GO_CHANNELS, + CONFIGURE_MAXIMUM_POSIX_KEYS, + CONFIGURE_MAXIMUM_POSIX_TIMERS, + CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS, + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES, + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS, + CONFIGURE_MAXIMUM_POSIX_SEMAPHORES, + CONFIGURE_MAXIMUM_POSIX_BARRIERS, + CONFIGURE_MAXIMUM_POSIX_RWLOCKS, + CONFIGURE_MAXIMUM_POSIX_SPINLOCKS, + CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE, + CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME + }; + #endif + + /** This variable specifies the minimum stack size for tasks in an RTEMS + * application. + * + * @note This is left as a simple uint32_t so it can be externed as + * needed without requring being high enough logical to + * include the full configuration table. + */ + uint32_t rtems_minimum_stack_size = + CONFIGURE_MINIMUM_TASK_STACK_SIZE; + + /** This variable specifies the maximum priority value that + * a task may have. This must be a power of 2 between 4 + * and 256 and is specified in terms of Classic API + * priority values. + * + * @note This is left as a simple uint8_t so it can be externed as + * needed without requring being high enough logical to + * include the full configuration table. + */ + uint8_t rtems_maximum_priority = CONFIGURE_MAXIMUM_PRIORITY; + + /** + * This is the primary Configuration Table for this application. + */ + rtems_configuration_table Configuration = { + NULL, /* filled in by BSP */ + CONFIGURE_EXECUTIVE_RAM_SIZE, /* required RTEMS workspace */ + CONFIGURE_MAXIMUM_USER_EXTENSIONS, /* maximum dynamic extensions */ + CONFIGURE_MICROSECONDS_PER_TICK, /* microseconds per clock tick */ + CONFIGURE_TICKS_PER_TIMESLICE, /* ticks per timeslice quantum */ + CONFIGURE_IDLE_TASK_BODY, /* user's IDLE task */ + CONFIGURE_IDLE_TASK_STACK_SIZE, /* IDLE task stack size */ + CONFIGURE_INTERRUPT_STACK_SIZE, /* interrupt stack size */ + CONFIGURE_TASK_STACK_ALLOCATOR, /* stack allocator */ + CONFIGURE_TASK_STACK_DEALLOCATOR, /* stack deallocator */ + CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY, /* true to clear memory */ + CONFIGURE_MAXIMUM_DRIVERS, /* maximum device drivers */ + CONFIGURE_NUMBER_OF_DRIVERS, /* static device drivers */ + Device_drivers, /* pointer to driver table */ + CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS, /* number of static extensions */ + CONFIGURE_INITIAL_EXTENSION_TABLE, /* pointer to static extensions */ + #if defined(RTEMS_MULTIPROCESSING) + CONFIGURE_MULTIPROCESSING_TABLE, /* pointer to MP config table */ + #endif + }; +#endif + +#endif /* CONFIGURE_HAS_OWN_CONFIGURATION_TABLE */ + +#if defined(RTEMS_SMP) + /** + * Instantiate the variable which specifies the number of CPUs + * in an SMP configuration. + */ + #if defined(CONFIGURE_INIT) + uint32_t rtems_smp_maximum_processors = CONFIGURE_SMP_MAXIMUM_PROCESSORS; + #else + extern uint32_t rtems_smp_maximum_processors; + #endif + /* + * Instantiate the Per CPU information based upon the user configuration. + */ + #if defined(CONFIGURE_INIT) + Per_CPU_Control _Per_CPU_Information[CONFIGURE_SMP_MAXIMUM_PROCESSORS]; + Per_CPU_Control *_Per_CPU_Information_p[CONFIGURE_SMP_MAXIMUM_PROCESSORS]; + #endif + +#endif + +/* + * If the user has configured a set of Classic API Initialization Tasks, + * then we need to install the code that runs that loop. + */ +#ifdef CONFIGURE_INIT + #if defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) || \ + defined(CONFIGURE_HAS_OWN_INIT_TASK_TABLE) + void (_RTEMS_tasks_Initialize_user_tasks_body)(void); + void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) = + _RTEMS_tasks_Initialize_user_tasks_body; + #else + void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) = NULL; + #endif +#endif + +/* + * If the user has configured a set of POSIX Initialization Threads, + * then we need to install the code that runs that loop. + */ +#ifdef RTEMS_POSIX_API + #ifdef CONFIGURE_INIT + #if defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) || \ + defined(CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE) + void _POSIX_Threads_Initialize_user_threads_body(void); + void (*_POSIX_Threads_Initialize_user_threads_p)(void) = + _POSIX_Threads_Initialize_user_threads_body; + #else + void (*_POSIX_Threads_Initialize_user_threads_p)(void) = NULL; + #endif + #endif +#endif + +#ifdef __cplusplus +} +#endif + +/****************************************************************** + ****************************************************************** + ****************************************************************** + * CONFIGURATION WARNINGS AND ERROR CHECKING * + ****************************************************************** + ****************************************************************** + ****************************************************************** + */ + +/* + * Make sure a task/thread of some sort is configured. + * + * When analyzing RTEMS to find the smallest possible of memory + * that must be allocated, you probably do want to configure 0 + * tasks/threads so there is a smaller set of calls to _Workspace_Allocate + * to analyze. + */ +#if !defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) + #if (CONFIGURE_MAXIMUM_TASKS == 0) && \ + (CONFIGURE_MAXIMUM_POSIX_THREADS == 0) && \ + (CONFIGURE_MAXIMUM_ADA_TASKS == 0) && \ + (CONFIGURE_MAXIMUM_GOROUTINES == 0) + #error "CONFIGURATION ERROR: No tasks or threads configured!!" + #endif +#endif + +#ifndef RTEMS_SCHEDSIM +/* + * Make sure at least one of the initialization task/thread + * tables was defined. + */ +#if !defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) && \ + !defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) && \ + !defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) +#error "CONFIGURATION ERROR: No initialization tasks or threads configured!!" +#endif +#endif + +/* + * If the user is trying to configure a multiprocessing application and + * RTEMS was not configured and built multiprocessing, then error out. + */ +#if defined(CONFIGURE_MP_APPLICATION) && \ + !defined(RTEMS_MULTIPROCESSING) +#error "CONFIGURATION ERROR: RTEMS not configured for multiprocessing!!" +#endif + +/* + * If an attempt was made to configure POSIX objects and + * the POSIX API was not configured into RTEMS, error out. + */ +#if !defined(RTEMS_POSIX_API) + #if ((CONFIGURE_MAXIMUM_POSIX_THREADS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_MUTEXES != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_KEYS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_TIMERS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_SEMAPHORES != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_BARRIERS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_SPINLOCKS != 0) || \ + (CONFIGURE_MAXIMUM_POSIX_RWLOCKS != 0) || \ + defined(CONFIGURE_POSIX_INIT_THREAD_TABLE)) + #error "CONFIGURATION ERROR: POSIX API support not configured!!" + #endif +#endif + +#ifndef RTEMS_SCHEDSIM +/* + * You must either explicity include or exclude the clock driver. + * It is such a common newbie error to leave it out. Maybe this + * will put an end to it. + * + * NOTE: If you are using the timer driver, it is considered + * mutually exclusive with the clock driver because the + * drivers are assumed to use the same "timer" hardware + * on many boards. + */ +#if !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE) + #if !defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER) && \ + !defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER) + #error "CONFIGURATION ERROR: Do you want the clock driver or not?!?" + #endif +#endif +#endif + +/* + * These names have been obsoleted so make the user application stop compiling + */ +#if defined(CONFIGURE_TEST_NEEDS_TIMER_DRIVER) || \ + defined(CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER) || \ + defined(CONFIGURE_TEST_NEEDS_CLOCK_DRIVER) || \ + defined(CONFIGURE_TEST_NEEDS_RTC_DRIVER) || \ + defined(CONFIGURE_TEST_NEEDS_STUB_DRIVER) +#error "CONFIGURATION ERROR: CONFIGURE_TEST_XXX constants are obsolete" +#endif + +/* + * Validate the configured maximum priority + */ +#if ((CONFIGURE_MAXIMUM_PRIORITY != 3) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 7) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 15) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 31) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 63) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 127) && \ + (CONFIGURE_MAXIMUM_PRIORITY != 255)) + #error "Maximum priority is not 1 less than a power of 2 between 4 and 256" +#endif + +#if (CONFIGURE_MAXIMUM_PRIORITY > PRIORITY_DEFAULT_MAXIMUM) + #error "Maximum priority configured higher than supported by target." +#endif + +/* + * If you have fewer POSIX Message Queue Descriptors than actual + * POSIX Message Queues, then you will not be able to open all the + * queues. + */ +#if (CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS < \ + CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES) + #error "Fewer POSIX Message Queue descriptors than Queues!" +#endif + +#endif +/* end of include file */ |