diff options
Diffstat (limited to 'cpukit/rtems')
77 files changed, 0 insertions, 14180 deletions
diff --git a/cpukit/rtems/include/rtems.h b/cpukit/rtems/include/rtems.h deleted file mode 100644 index d0ab705f57..0000000000 --- a/cpukit/rtems/include/rtems.h +++ /dev/null @@ -1,79 +0,0 @@ -/* rtems.h - * - * This include file contains information about RTEMS executive that - * is required by the application and is CPU independent. It includes - * two (2) CPU dependent files to tailor its data structures for a - * particular processor. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_RTEMS_GENERIC_h -#define __RTEMS_RTEMS_GENERIC_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/system.h> -#include <rtems/init.h> -#include <rtems/tasks.h> -#include <rtems/intr.h> -#include <rtems/clock.h> -#include <rtems/extension.h> -#include <rtems/timer.h> -#include <rtems/sem.h> -#include <rtems/message.h> -#include <rtems/event.h> -#include <rtems/signal.h> -#include <rtems/event.h> -#include <rtems/part.h> -#include <rtems/region.h> -#include <rtems/dpmem.h> -#include <rtems/io.h> -#include <rtems/fatal.h> -#include <rtems/ratemon.h> -#include <rtems/mp.h> - -/* - * RTEMS basic type definitions - */ - -typedef unsigned8 rtems_unsigned8; /* unsigned 8-bit value */ -typedef unsigned16 rtems_unsigned16; /* unsigned 16-bit value */ -typedef unsigned32 rtems_unsigned32; /* unsigned 32-bit value */ -typedef unsigned64 rtems_unsigned64; /* unsigned 64-bit value */ - -typedef signed8 rtems_signed8; /* signed 8-bit value */ -typedef signed16 rtems_signed16; /* signed 16-bit value */ -typedef signed32 rtems_signed32; /* signed 32-bit value */ -typedef signed64 rtems_signed64; /* signed 64-bit value */ - -typedef single_precision rtems_single; /* single precision float */ -typedef double_precision rtems_double; /* double precision float */ - -typedef boolean rtems_boolean; - -typedef Objects_Name rtems_name; -typedef Objects_Id rtems_id; - -typedef Context_Control rtems_context; -typedef Context_Control_fp rtems_context_fp; -typedef CPU_Interrupt_frame rtems_interrupt_frame; - -#define RTEMS_HAS_HARDWARE_FP CPU_HARDWARE_FP - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/asr.h b/cpukit/rtems/include/rtems/rtems/asr.h deleted file mode 100644 index 44d03f2802..0000000000 --- a/cpukit/rtems/include/rtems/rtems/asr.h +++ /dev/null @@ -1,177 +0,0 @@ -/* asr.h - * - * This include file contains all the constants and structures associated - * with the Asynchronous Signal Handler. This Handler provides the low-level - * support required by the Signal Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_ASR_h -#define __RTEMS_ASR_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/modes.h> - -/* - * - * The following type defines the control block used to manage - * each signal set. - */ - -typedef unsigned32 rtems_signal_set; - -/* - * Return type for ASR Handler - */ - -typedef void rtems_asr; - -/* - * The following type corresponds to the applications asynchronous - * signal processing routine. - */ - -typedef rtems_asr ( *rtems_asr_entry )( - rtems_signal_set - ); - -/* - * - * The following defines the control structure used to manage - * signals. Each thread has a copy of this record. - */ - -typedef struct { - rtems_asr_entry handler; /* address of RTEMS_ASR */ - rtems_mode mode_set; /* RTEMS_ASR mode */ - rtems_signal_set signals_posted; /* signal set */ - rtems_signal_set signals_pending; /* pending signal set */ - unsigned32 nest_level; /* nest level of RTEMS_ASR */ -} ASR_Information; - -/* - * The following constants define the individual signals which may - * be used to compose a signal set. - */ - -#define RTEMS_SIGNAL_0 0x00000001 -#define RTEMS_SIGNAL_1 0x00000002 -#define RTEMS_SIGNAL_2 0x00000004 -#define RTEMS_SIGNAL_3 0x00000008 -#define RTEMS_SIGNAL_4 0x00000010 -#define RTEMS_SIGNAL_5 0x00000020 -#define RTEMS_SIGNAL_6 0x00000040 -#define RTEMS_SIGNAL_7 0x00000080 -#define RTEMS_SIGNAL_8 0x00000100 -#define RTEMS_SIGNAL_9 0x00000200 -#define RTEMS_SIGNAL_10 0x00000400 -#define RTEMS_SIGNAL_11 0x00000800 -#define RTEMS_SIGNAL_12 0x00001000 -#define RTEMS_SIGNAL_13 0x00002000 -#define RTEMS_SIGNAL_14 0x00004000 -#define RTEMS_SIGNAL_15 0x00008000 -#define RTEMS_SIGNAL_16 0x00010000 -#define RTEMS_SIGNAL_17 0x00020000 -#define RTEMS_SIGNAL_18 0x00040000 -#define RTEMS_SIGNAL_19 0x00080000 -#define RTEMS_SIGNAL_20 0x00100000 -#define RTEMS_SIGNAL_21 0x00200000 -#define RTEMS_SIGNAL_22 0x00400000 -#define RTEMS_SIGNAL_23 0x00800000 -#define RTEMS_SIGNAL_24 0x01000000 -#define RTEMS_SIGNAL_25 0x02000000 -#define RTEMS_SIGNAL_26 0x04000000 -#define RTEMS_SIGNAL_27 0x08000000 -#define RTEMS_SIGNAL_28 0x10000000 -#define RTEMS_SIGNAL_29 0x20000000 -#define RTEMS_SIGNAL_30 0x40000000 -#define RTEMS_SIGNAL_31 0x80000000 - -/* - * _ASR_Initialize - * - * DESCRIPTION: - * - * This routine initializes the given RTEMS_ASR information record. - */ - -STATIC INLINE void _ASR_Initialize ( - ASR_Information *information -); - -/* - * _ASR_Swap_signals - * - * DESCRIPTION: - * - * This routine atomically swaps the pending and posted signal - * sets. This is done when the thread alters its mode in such a - * way that the RTEMS_ASR disable/enable flag changes. - */ - -STATIC INLINE void _ASR_Swap_signals ( - ASR_Information *information -); - -/* - * _ASR_Is_null_handler - * - * DESCRIPTION: - * - * This function returns TRUE if the given asr_handler is NULL and - * FALSE otherwise. - */ - -STATIC INLINE boolean _ASR_Is_null_handler ( - rtems_asr_entry asr_handler -); - -/* - * _ASR_Are_signals_pending - * - * DESCRIPTION: - * - * This function returns TRUE if there are signals pending in the - * given RTEMS_ASR information record and FALSE otherwise. - */ - -STATIC INLINE boolean _ASR_Are_signals_pending ( - ASR_Information *information -); - -/* - * _ASR_Post_signals - * - * DESCRIPTION: - * - * This routine posts the given signals into the signal_set - * passed in. The result is returned to the user in signal_set. - * - * NOTE: This must be implemented as a macro. - */ - -STATIC INLINE void _ASR_Post_signals( - rtems_signal_set signals, - rtems_signal_set *signal_set -); - -#include <rtems/asr.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/attr.h b/cpukit/rtems/include/rtems/rtems/attr.h deleted file mode 100644 index 1c59c98dcd..0000000000 --- a/cpukit/rtems/include/rtems/rtems/attr.h +++ /dev/null @@ -1,188 +0,0 @@ -/* attr.h - * - * This include file contains all information about the Object Attributes - * Handler. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_ATTRIBUTES_h -#define __RTEMS_ATTRIBUTES_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* types */ - -typedef unsigned32 rtems_attribute; - -/* constants */ - -#define RTEMS_DEFAULT_ATTRIBUTES 0x00000000 - -#define RTEMS_NO_FLOATING_POINT 0x00000000 /* don't use FP HW */ -#define RTEMS_FLOATING_POINT 0x00000001 /* utilize coprocessor */ - -#define RTEMS_LOCAL 0x00000000 /* local resource */ -#define RTEMS_GLOBAL 0x00000002 /* global resource */ - -#define RTEMS_FIFO 0x00000000 /* process RTEMS_FIFO */ -#define RTEMS_PRIORITY 0x00000004 /* process by priority */ - -#define RTEMS_NO_LIMIT 0x00000000 /* unlimited Q entries */ -#define RTEMS_LIMIT 0x00000008 /* limit Q entries */ - -#define RTEMS_COUNTING_SEMAPHORE 0x00000000 -#define RTEMS_BINARY_SEMAPHORE 0x00000010 - -#define RTEMS_NO_INHERIT_PRIORITY 0x00000000 -#define RTEMS_INHERIT_PRIORITY 0x00000020 - -#if ( CPU_HARDWARE_FP == TRUE ) -#define ATTRIBUTES_NOT_SUPPORTED 0 -#else -#define ATTRIBUTES_NOT_SUPPORTED RTEMS_FLOATING_POINT -#endif - -#if ( CPU_ALL_TASKS_ARE_FP == TRUE ) -#define ATTRIBUTES_REQUIRED RTEMS_FLOATING_POINT -#else -#define ATTRIBUTES_REQUIRED 0 -#endif - -/* - * _Attributes_Handler_initialization - * - * DESCRIPTION: - * - * This routine performs initialization for this handler. - * - * NOTE: There is no initialization required in C. Conditional compilation - * takes care of this in C. - */ - -#define _Attributes_Handler_initialization() - -/* - * _Attributes_Set - * - * DESCRIPTION: - * - * This function sets the requested new_attributes in the attribute_set - * passed in. The result is returned to the user. - */ - -STATIC INLINE rtems_attribute _Attributes_Set ( - rtems_attribute new_attributes, - rtems_attribute attribute_set -); - -/* - * _Attributes_Clear - * - * DESCRIPTION: - * - * This function clears the requested new_attributes in the attribute_set - * passed in. The result is returned to the user. - */ - -STATIC INLINE rtems_attribute _Attributes_Clear ( - rtems_attribute attribute_set, - rtems_attribute mask -); - -/* - * _Attributes_Is_floating_point - * - * DESCRIPTION: - * - * This function returns TRUE if the floating point attribute is - * enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_floating_point( - rtems_attribute attribute_set -); - -/* - * _Attributes_Is_global - * - * DESCRIPTION: - * - * This function returns TRUE if the global object attribute is - * enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_global( - rtems_attribute attribute_set -); - -/* - * _Attributes_Is_priority - * - * DESCRIPTION: - * - * This function returns TRUE if the priority attribute is - * enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_priority( - rtems_attribute attribute_set -); - -/* - * _Attributes_Is_limit - * - * DESCRIPTION: - * - * This function returns TRUE if the limited attribute is - * enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_limit( - rtems_attribute attribute_set -); - -/* - * _Attributes_Is_binary_semaphore - * - * DESCRIPTION: - * - * This function returns TRUE if the binary semaphore attribute is - * enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_binary_semaphore( - rtems_attribute attribute_set -); - -/* - * _Attributes_Is_inherit_priority - * - * DESCRIPTION: - * - * This function returns TRUE if the priority inheritance attribute - * is enabled in the attribute_set and FALSE otherwise. - */ - -STATIC INLINE boolean _Attributes_Is_inherit_priority( - rtems_attribute attribute_set -); - -#include <rtems/attr.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/clock.h b/cpukit/rtems/include/rtems/rtems/clock.h deleted file mode 100644 index e849ab4f40..0000000000 --- a/cpukit/rtems/include/rtems/rtems/clock.h +++ /dev/null @@ -1,102 +0,0 @@ -/* clock.h - * - * This include file contains all the constants and structures associated - * with the Clock Manager. This manager provides facilities to set, obtain, - * and continually update the current date and time. - * - * This manager provides directives to: - * - * + set the current date and time - * + obtain the current date and time - * + announce a clock tick - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_CLOCK_h -#define __RTEMS_CLOCK_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/tod.h> - -/* - * List of things which can be returned by the rtems_clock_get directive. - */ - -typedef enum { - RTEMS_CLOCK_GET_TOD, - RTEMS_CLOCK_GET_SECONDS_SINCE_EPOCH, - RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, - RTEMS_CLOCK_GET_TICKS_PER_SECOND, - RTEMS_CLOCK_GET_TIME_VALUE -} rtems_clock_get_options; - -/* - * Standard flavor style to return TOD in for a rtems_clock_get option. - */ - -typedef struct { - unsigned32 seconds; - unsigned32 microseconds; -} rtems_clock_time_value; - -/* - * rtems_clock_get - * - * DESCRIPTION: - * - * This routine implements the rtems_clock_get directive. It returns - * one of the following: - * + current time of day - * + seconds since epoch - * + ticks since boot - * + ticks per second - */ - -rtems_status_code rtems_clock_get( - rtems_clock_get_options option, - void *time_buffer -); - -/* - * rtems_clock_set - * - * DESCRIPTION: - * - * This routine implements the rtems_clock_set directive. It sets - * the current time of day to that in the time_buffer record. - */ - -rtems_status_code rtems_clock_set( - rtems_time_of_day *time_buffer -); - -/* - * rtems_clock_tick - * - * DESCRIPTION: - * - * This routine implements the rtems_clock_tick directive. It is invoked - * to inform RTEMS of the occurrence of a clock tick. - */ - -rtems_status_code rtems_clock_tick( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/dpmem.h b/cpukit/rtems/include/rtems/rtems/dpmem.h deleted file mode 100644 index 669eb394d8..0000000000 --- a/cpukit/rtems/include/rtems/rtems/dpmem.h +++ /dev/null @@ -1,210 +0,0 @@ -/* dpmem.h - * - * This include file contains all the constants and structures associated - * with the Dual Ported Memory Manager. This manager provides a mechanism - * for converting addresses between internal and external representations - * for multiple dual-ported memory areas. - * - * Directives provided are: - * - * + create a port - * + get ID of a port - * + delete a port - * + convert external to internal address - * + convert internal to external address - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_DUAL_PORTED_MEMORY_h -#define __RTEMS_DUAL_PORTED_MEMORY_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/object.h> - -/* - * The following structure defines the port control block. Each port - * has a control block associated with it. This control block contains - * all information required to support the port related operations. - */ - -typedef struct { - Objects_Control Object; - void *internal_base; /* base internal address */ - void *external_base; /* base external address */ - unsigned32 length; /* length of dual-ported area */ -} Dual_ported_memory_Control; - -/* - * The following define the internal Dual Ported Memory information. - */ - -EXTERN Objects_Information _Dual_ported_memory_Information; - -/* - * _Dual_ported_memory_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Dual_ported_memory_Manager_initialization( - unsigned32 maximum_ports -); - -/* - * rtems_port_create - * - * DESCRIPTION: - * - * This routine implements the rtems_port_create directive. The port - * will have the name name. The port maps onto an area of dual ported - * memory of length bytes which has internal_start and external_start - * as the internal and external starting addresses, respectively. - * It returns the id of the created port in ID. - */ - -rtems_status_code rtems_port_create( - Objects_Name name, - void *internal_start, - void *external_start, - unsigned32 length, - Objects_Id *id -); - -/* - * rtems_port_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_port_ident directive. This directive - * returns the port ID associated with name. If more than one port is - * named name, then the port to which the ID belongs is arbitrary. - */ - -rtems_status_code rtems_port_ident( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_port_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_port_delete directive. It deletes - * the port associated with ID. - */ - -rtems_status_code rtems_port_delete( - Objects_Id id -); - -/* - * rtems_port_external_to_internal - * - * DESCRIPTION: - * - * This routine implements the rtems_port_external_to_internal directive. - * It returns the internal port address which maps to the provided - * external port address for the specified port ID. - */ - -rtems_status_code rtems_port_external_to_internal( - Objects_Id id, - void *external, - void **internal -); - -/* - * rtems_port_internal_to_external - * - * DESCRIPTION: - * - * This routine implements the Port_internal_to_external directive. - * It returns the external port address which maps to the provided - * internal port address for the specified port ID. - */ - -rtems_status_code rtems_port_internal_to_external( - Objects_Id id, - void *internal, - void **external -); - -/* - * _Dual_ported_memory_Allocate - * - * DESCRIPTION: - * - * This routine allocates a port control block from the inactive chain - * of free port control blocks. - */ - -STATIC INLINE Dual_ported_memory_Control - *_Dual_ported_memory_Allocate ( void ); - -/* - * _Dual_ported_memory_Free - * - * DESCRIPTION: - * - * This routine frees a port control block to the inactive chain - * of free port control blocks. - */ - -STATIC INLINE void _Dual_ported_memory_Free ( - Dual_ported_memory_Control *the_port -); - -/* - * _Dual_ported_memory_Get - * - * DESCRIPTION: - * - * This function maps port IDs to port control blocks. If ID - * corresponds to a local port, then it returns the_port control - * pointer which maps to ID and location is set to OBJECTS_LOCAL. - * Global ports are not supported, thus if ID does not map to a - * local port, location is set to OBJECTS_ERROR and the_port is - * undefined. - */ - -STATIC INLINE Dual_ported_memory_Control *_Dual_ported_memory_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Dual_ported_memory_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_port is NULL and FALSE otherwise. - */ - -STATIC INLINE boolean _Dual_ported_memory_Is_null( - Dual_ported_memory_Control *the_port -); - -#include <rtems/dpmem.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/event.h b/cpukit/rtems/include/rtems/rtems/event.h deleted file mode 100644 index aeb71b2abd..0000000000 --- a/cpukit/rtems/include/rtems/rtems/event.h +++ /dev/null @@ -1,158 +0,0 @@ -/* event.h - * - * This include file contains the information pertaining to the Event - * Manager. This manager provides a high performance method of communication - * and synchronization. - * - * Directives provided are: - * - * + send an event set to a task - * + receive event condition - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_EVENT_h -#define __RTEMS_EVENT_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> -#include <rtems/eventset.h> - -/* - * This constant is passed as the event_in to the - * rtems_event_receive directive to determine which events are pending. - */ - -#define EVENT_CURRENT 0 - -/* - * _Event_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -STATIC INLINE void _Event_Manager_initialization( void ); - -/* - * rtems_event_send - * - * DESCRIPTION: - * - * This routine implements the rtems_event_send directive. It sends - * event_in to the task specified by ID. If the task is blocked - * waiting to receive events and the posting of event_in satisfies - * the task's event condition, then it is unblocked. - */ - -rtems_status_code rtems_event_send ( - Objects_Id id, - rtems_event_set event_in -); - -/* - * rtems_event_receive - * - * DESCRIPTION: - * - * This routine implements the rtems_event_receive directive. This - * directive is invoked when the calling task wishes to receive - * the event_in event condition. One of the fields in the option_set - * parameter determines whether the receive request is satisfied if - * any or all of the events are pending. If the event condition - * is not satisfied immediately, then the task may block with an - * optional timeout of TICKS clock ticks or return immediately. - * This determination is based on another field in the option_set - * parameter. This directive returns the events received in the - * event_out parameter. - */ - -rtems_status_code rtems_event_receive ( - rtems_event_set event_in, - rtems_option option_set, - rtems_interval ticks, - rtems_event_set *event_out -); - -/* - * _Event_Seize - * - * DESCRIPTION: - * - * This routine determines if the event condition event_in is - * satisfied. If so or if the no_wait option is enabled in option_set, - * then the procedure returns immediately. If neither of these - * conditions is true, then the calling task is blocked with an - * optional timeout of ticks clock ticks. - */ - -void _Event_Seize ( - rtems_event_set event_in, - rtems_option option_set, - rtems_interval ticks -); - -/* - * _Event_Surrender - * - * DESCRIPTION: - * - * This routine determines if the event condition of the_thread - * has been satisfied. If so, it unblocks the_thread. - */ - -void _Event_Surrender ( - Thread_Control *the_thread -); - -/* - * _Event_Timeout - * - * DESCRIPTION: - * - * This routine is invoked when a task's event receive request - * has not been satisfied after the specified timeout interval. - * The task represented by ID will be unblocked and its status - * code will be set in it's control block to indicate that a timeout - * has occurred. - */ - -void _Event_Timeout ( - Objects_Id id, - void *ignored -); - -/* - * The following defines the synchronization flag used by the - * Event Manager to insure that signals sent to the currently - * executing thread are received properly. - */ - -EXTERN boolean _Event_Sync; /* event manager sync flag */ - -#include <rtems/event.inl> -#include <rtems/eventmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/eventmp.h b/cpukit/rtems/include/rtems/rtems/eventmp.h deleted file mode 100644 index 9df2ef1e22..0000000000 --- a/cpukit/rtems/include/rtems/rtems/eventmp.h +++ /dev/null @@ -1,147 +0,0 @@ -/* eventmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Event Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_EVENT_MP_h -#define __RTEMS_EVENT_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/event.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type defines the list of - * remote event operations. - */ - -typedef enum { - EVENT_MP_SEND_REQUEST = 0, - EVENT_MP_SEND_RESPONSE = 1, -} Event_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote event operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Event_MP_Remote_operations operation; - rtems_event_set event_in; -} Event_MP_Packet; - -/* - * _Event_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - * - * This routine is not needed since there are no process - * packets to be sent by this manager. - */ - -/* - * _Event_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Event_MP_Send_request_packet ( - Event_MP_Remote_operations operation, - Objects_Id event_id, - rtems_event_set event_in -); - -/* - * _Event_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Event_MP_Send_response_packet ( - Event_MP_Remote_operations operation, - Thread_Control *the_thread -); - -/* - * - * _Event_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Event_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Event_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - * - * This routine is not needed since there are no objects - * deleted by this manager. - */ - -/* - * _Event_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - * - * This routine is not needed since there are no objects - * deleted by this manager. - */ - -/* - * _Event_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a event mp packet. - */ - -Event_MP_Packet *_Event_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/eventset.h b/cpukit/rtems/include/rtems/rtems/eventset.h deleted file mode 100644 index a25dabe58b..0000000000 --- a/cpukit/rtems/include/rtems/rtems/eventset.h +++ /dev/null @@ -1,142 +0,0 @@ -/* eventset.h - * - * This include file contains the information pertaining to the - * Event Sets Handler. This handler provides methods for the manipulation - * of event sets which will be sent and received by tasks. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_EVENT_SET_h -#define __RTEMS_EVENT_SET_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * The following defines the type used to control event sets. - */ - -typedef unsigned32 rtems_event_set; - -/* - * The following constants define the individual events which may - * be used to compose an event set. - */ - -#define RTEMS_PENDING_EVENTS 0 /* receive pending events */ -#define RTEMS_ALL_EVENTS 0xFFFFFFFF - -#define RTEMS_EVENT_0 0x00000001 -#define RTEMS_EVENT_1 0x00000002 -#define RTEMS_EVENT_2 0x00000004 -#define RTEMS_EVENT_3 0x00000008 -#define RTEMS_EVENT_4 0x00000010 -#define RTEMS_EVENT_5 0x00000020 -#define RTEMS_EVENT_6 0x00000040 -#define RTEMS_EVENT_7 0x00000080 -#define RTEMS_EVENT_8 0x00000100 -#define RTEMS_EVENT_9 0x00000200 -#define RTEMS_EVENT_10 0x00000400 -#define RTEMS_EVENT_11 0x00000800 -#define RTEMS_EVENT_12 0x00001000 -#define RTEMS_EVENT_13 0x00002000 -#define RTEMS_EVENT_14 0x00004000 -#define RTEMS_EVENT_15 0x00008000 -#define RTEMS_EVENT_16 0x00010000 -#define RTEMS_EVENT_17 0x00020000 -#define RTEMS_EVENT_18 0x00040000 -#define RTEMS_EVENT_19 0x00080000 -#define RTEMS_EVENT_20 0x00100000 -#define RTEMS_EVENT_21 0x00200000 -#define RTEMS_EVENT_22 0x00400000 -#define RTEMS_EVENT_23 0x00800000 -#define RTEMS_EVENT_24 0x01000000 -#define RTEMS_EVENT_25 0x02000000 -#define RTEMS_EVENT_26 0x04000000 -#define RTEMS_EVENT_27 0x08000000 -#define RTEMS_EVENT_28 0x10000000 -#define RTEMS_EVENT_29 0x20000000 -#define RTEMS_EVENT_30 0x40000000 -#define RTEMS_EVENT_31 0x80000000 - - -/* - * The following constant is the value of an event set which - * has no events pending. - */ - -#define EVENT_SETS_NONE_PENDING 0 - -/* - * _Event_sets_Is_empty - * - * DESCRIPTION: - * - * This function returns TRUE if on events are posted in the event_set, - * and FALSE otherwise. - */ - -STATIC INLINE boolean _Event_sets_Is_empty( - rtems_event_set the_event_set -); - -/* - * _Event_sets_Post - * - * DESCRIPTION: - * - * This routine posts the given new_events into the event_set - * passed in. The result is returned to the user in event_set. - */ - -STATIC INLINE void _Event_sets_Post( - rtems_event_set the_new_events, - rtems_event_set *the_event_set -); - -/* - * _Event_sets_Get - * - * DESCRIPTION: - * - * This function returns the events in event_condition which are - * set in event_set. - */ - -STATIC INLINE rtems_event_set _Event_sets_Get( - rtems_event_set the_event_set, - rtems_event_set the_event_condition -); - -/* - * _Event_sets_Clear - * - * DESCRIPTION: - * - * This function removes the events in mask from the event_set - * passed in. The result is returned to the user in event_set. - */ - -STATIC INLINE rtems_event_set _Event_sets_Clear( - rtems_event_set the_event_set, - rtems_event_set the_mask -); - -#include <rtems/eventset.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/intr.h b/cpukit/rtems/include/rtems/rtems/intr.h deleted file mode 100644 index 3669af1ccc..0000000000 --- a/cpukit/rtems/include/rtems/rtems/intr.h +++ /dev/null @@ -1,125 +0,0 @@ -/* intr.h - * - * This include file contains all the constants and structures associated - * with the Interrupt Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_INTERRUPT_h -#define __RTEMS_INTERRUPT_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/isr.h> - -/* - * Interrupt level type - */ - -typedef ISR_Level rtems_interrupt_level; - -/* - * _Interrupt_Manager_initialization - * - * DESCRIPTION: - * - * This routine initializes the interrupt manager. - * - */ - -void _Interrupt_Manager_initialization( void ); - -/* - * rtems_interrupt_catch - * - * DESCRIPTION: - * - * This routine implements the rtems_interrupt_catch directive. This - * directive installs new_isr_handler as the RTEMS interrupt service - * routine for vector. The previous RTEMS interrupt service - * routine is returned in old_isr_handler. - */ - -rtems_status_code rtems_interrupt_catch( - rtems_isr_entry new_isr_handler, - rtems_vector_number vector, - rtems_isr_entry *old_isr_handler -); - -/* - * rtems_interrupt_disable - * - * DESCRIPTION: - * - * This routine disables all maskable interrupts and returns the - * previous level in _isr_cookie. - */ - -#define rtems_interrupt_disable( _isr_cookie ) \ - _ISR_Disable(_isr_cookie) - -/* - * rtems_interrupt_enable - * - * DESCRIPTION: - * - * This routine enables maskable interrupts to the level indicated - * _isr_cookie. - */ - -#define rtems_interrupt_enable( _isr_cookie ) \ - _ISR_Enable(_isr_cookie) - -/* - * rtems_interrupt_flash - * - * DESCRIPTION: - * - * This routine temporarily enables maskable interrupts to the - * level in _isr_cookie before redisabling them. - */ - -#define rtems_interrupt_flash( _isr_cookie ) \ - _ISR_Flash(_isr_cookie) - -/* - * rtems_interrupt_cause - * - * DESCRIPTION: - * - * This routine generates an interrupt. - * - * NOTE: No implementation. - */ - -#define rtems_interrupt_cause( _interrupt_to_cause ) - -/* - * rtems_interrupt_cause - * - * DESCRIPTION: - * - * This routine clears the specified interrupt. - * - * NOTE: No implementation. - */ - -#define rtems_interrupt_clear( _interrupt_to_clear ) - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/message.h b/cpukit/rtems/include/rtems/rtems/message.h deleted file mode 100644 index aefcea3c36..0000000000 --- a/cpukit/rtems/include/rtems/rtems/message.h +++ /dev/null @@ -1,461 +0,0 @@ -/* message.h - * - * This include file contains all the constants and structures associated - * with the Message Queue Manager. This manager provides a mechanism for - * communication and synchronization between tasks using messages. - * - * Directives provided are: - * - * + create a queue - * + get ID of a queue - * + delete a queue - * + put a message at the rear of a queue - * + put a message at the front of a queue - * + broadcast N messages to a queue - * + receive message from a queue - * + flush all messages on a queue - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_MESSAGE_QUEUE_h -#define __RTEMS_MESSAGE_QUEUE_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/chain.h> -#include <rtems/object.h> -#include <rtems/threadq.h> - -/* - * The following defines the data types needed to manipulate - * the contents of message buffers. - */ - -typedef struct { - unsigned32 field1; - unsigned32 field2; - unsigned32 field3; - unsigned32 field4; -} Message_queue_Buffer; - -/* - * The following records define the organization of a message - * buffer. - */ - -typedef struct { - Chain_Node Node; - Message_queue_Buffer Contents; -} Message_queue_Buffer_control; - -/* - * The following records define the control block used to manage - * each message queue. - */ - -typedef struct { - Objects_Control Object; - Thread_queue_Control Wait_queue; - rtems_attribute attribute_set; - unsigned32 maximum_pending_messages; - unsigned32 number_of_pending_messages; - Chain_Control Pending_messages; -} Message_queue_Control; - -/* - * The following defines the information control block used to - * manage this class of objects. - */ - -EXTERN Objects_Information _Message_queue_Information; - -/* - * The following defines the data structures used to - * manage the pool of inactive message buffers. - */ - -EXTERN Chain_Control _Message_queue_Inactive_messages; - -/* - * The following enumerated type details the modes in which a message - * may be submitted to a message queue. The message may be posted - * in a send or urgent fashion. - */ - -typedef enum { - MESSAGE_QUEUE_SEND_REQUEST = 0, - MESSAGE_QUEUE_URGENT_REQUEST = 1 -} Message_queue_Submit_types; - -/* - * _Message_queue_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Message_queue_Manager_initialization( - unsigned32 maximum_message_queues, - unsigned32 maximum_messages -); - -/* - * rtems_message_queue_create - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_create directive. The - * message queue will have the name name. If the attribute_set indicates - * that the message queue is to be limited in the number of messages - * that can be outstanding, then count indicates the maximum number of - * messages that will be held. It returns the id of the created - * message queue in ID. - */ - -rtems_status_code rtems_message_queue_create( - Objects_Name name, - unsigned32 count, - rtems_attribute attribute_set, - Objects_Id *id -); - -/* - * rtems_message_queue_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_ident directive. - * This directive returns the message queue ID associated with NAME. - * If more than one message queue is named name, then the message - * queue to which the ID belongs is arbitrary. node indicates the - * extent of the search for the ID of the message queue named name. - * The search can be limited to a particular node or allowed to - * encompass all nodes. - */ - -rtems_status_code rtems_message_queue_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -); - -/* - * rtems_message_queue_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_delete directive. The - * message queue indicated by ID is deleted. - */ - -rtems_status_code rtems_message_queue_delete( - Objects_Id id -); - -/* - * rtems_message_queue_send - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_send directive. - * This directive sends the message buffer to the message queue - * indicated by ID. If one or more tasks is blocked waiting - * to receive a message from this message queue, then one will - * receive the message. The task selected to receive the - * message is based on the task queue discipline algorithm in - * use by this particular message queue. If no tasks are waiting, - * then the message buffer will be placed at the rear of the - * chain of pending messages for this message queue. - */ - -rtems_status_code rtems_message_queue_send( - Objects_Id id, - void *buffer -); - -/* - * rtems_message_queue_urgent - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_send directive. - * This directive sends the message buffer to the message queue - * indicated by ID. If one or more tasks is blocked waiting - * to receive a message from this message queue, then one will - * receive the message. The task selected to receive the - * message is based on the task queue discipline algorithm in - * use by this particular message queue. If no tasks are waiting, - * then the message buffer will be placed at the rear of the - * chain of pending messages for this message queue. - */ - -rtems_status_code rtems_message_queue_urgent( - Objects_Id id, - void *buffer -); - -/* - * rtems_message_queue_broadcast - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_send directive. - * This directive sends the message buffer to the message queue - * indicated by ID. If one or more tasks is blocked waiting - * to receive a message from this message queue, then one will - * receive the message. The task selected to receive the - * message is based on the task queue discipline algorithm in - * use by this particular message queue. If no tasks are waiting, - * then the message buffer will be placed at the rear of the - * chain of pending messages for this message queue. - */ - -rtems_status_code rtems_message_queue_broadcast( - Objects_Id id, - void *buffer, - unsigned32 *count -); - -/* - * rtems_message_queue_receive - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_receive directive. - * This directive is invoked when the calling task wishes to receive - * a message from the message queue indicated by ID. The received - * message is to be placed in buffer. If no messages are outstanding - * and the option_set indicates that the task is willing to block, - * then the task will be blocked until a message arrives or until, - * optionally, timeout clock ticks have passed. - */ - -rtems_status_code rtems_message_queue_receive( - Objects_Id id, - void *buffer, - unsigned32 option_set, - rtems_interval timeout -); - -/* - * rtems_message_queue_flush - * - * DESCRIPTION: - * - * This routine implements the rtems_message_queue_flush directive. - * This directive takes all outstanding messages for the message - * queue indicated by ID and returns them to the inactive message - * chain. The number of messages flushed is returned in COUNT. - */ - -rtems_status_code rtems_message_queue_flush( - Objects_Id id, - unsigned32 *count -); - -/* - * _Message_queue_Copy_buffer - * - * DESCRIPTION: - * - * This routine copies the contents of the source message buffer - * to the destination message buffer. - */ - -STATIC INLINE void _Message_queue_Copy_buffer ( - Message_queue_Buffer *source, - Message_queue_Buffer *destination -); - -/* - * _Message_queue_Seize - * - * DESCRIPTION: - * - * This routine attempts to receive a message from the_message_queue. - * If a message is available or if the RTEMS_NO_WAIT option is enabled in - * option_set, then the routine returns. Otherwise, the calling task - * is blocked until a message is available. If a message is returned - * to the task, then buffer will contain its contents. - */ - -boolean _Message_queue_Seize( - Message_queue_Control *the_message_queue, - unsigned32 option_set, - Message_queue_Buffer *buffer -); - -/* - * _Message_queue_Flush_support - * - * DESCRIPTION: - * - * This routine flushes all outstanding messages and returns - * them to the inactive message chain. - */ - -unsigned32 _Message_queue_Flush_support( - Message_queue_Control *the_message_queue -); - -/* - * _Message_queue_Submit - * - * DESCRIPTION: - * - * This routine provides the common foundation for the - * rtems_message_queue_send and rtems_message_queue_urgent directives. - */ - -rtems_status_code _Message_queue_Submit( - Objects_Id id, - Message_queue_Buffer *buffer, - Message_queue_Submit_types submit_type -); - -/* - * _Message_queue_Allocate_message_buffer - * - * DESCRIPTION: - * - * This function allocates a message buffer from the inactive - * message buffer chain. - */ - -STATIC INLINE Message_queue_Buffer_control * - _Message_queue_Allocate_message_buffer ( void ); - -/* - * _Message_queue_Free_message_buffer - * - * DESCRIPTION: - * - * This routine frees a message buffer to the inactive - * message buffer chain. - */ - -STATIC INLINE void _Message_queue_Free_message_buffer ( - Message_queue_Buffer_control *the_message -); - -/* - * _Message_queue_Get_pending_message - * - * DESCRIPTION: - * - * This function removes the first message from the_message_queue - * and returns a pointer to it. - */ - -STATIC INLINE - Message_queue_Buffer_control *_Message_queue_Get_pending_message ( - Message_queue_Control *the_message_queue -); - -/* - * _Message_queue_Append - * - * DESCRIPTION: - * - * This routine places the_message at the rear of the outstanding - * messages on the_message_queue. - */ - -STATIC INLINE void _Message_queue_Append ( - Message_queue_Control *the_message_queue, - Message_queue_Buffer_control *the_message -); - -/* - * _Message_queue_Prepend - * - * DESCRIPTION: - * - * This routine places the_message at the rear of the outstanding - * messages on the_message_queue. - */ - -STATIC INLINE void _Message_queue_Prepend ( - Message_queue_Control *the_message_queue, - Message_queue_Buffer_control *the_message -); - -/* - * _Message_queue_Is_null - * - * DESCRIPTION: - * - * This function places the_message at the rear of the outstanding - * messages on the_message_queue. - */ - -STATIC INLINE boolean _Message_queue_Is_null ( - Message_queue_Control *the_message_queue -); - -/* - * _Message_queue_Allocate - * - * DESCRIPTION: - * - * This function allocates a message queue control block from - * the inactive chain of free message queue control blocks. - */ - -STATIC INLINE Message_queue_Control *_Message_queue_Allocate ( void ); - -/* - * _Message_queue_Free - * - * DESCRIPTION: - * - * This routine allocates a message queue control block from - * the inactive chain of free message queue control blocks. - */ - -STATIC INLINE void _Message_queue_Free ( - Message_queue_Control *the_message_queue -); - -/* - * _Message_queue_Get - * - * DESCRIPTION: - * - * This function maps message queue IDs to message queue control - * blocks. If ID corresponds to a local message queue, then it - * returns the_message_queue control pointer which maps to ID - * and location is set to OBJECTS_LOCAL. If the message queue ID is - * global and resides on a remote node, then location is set - * to OBJECTS_REMOTE, and the_message_queue is undefined. - * Otherwise, location is set to OBJECTS_ERROR and - * the_message_queue is undefined. - */ - -STATIC INLINE Message_queue_Control *_Message_queue_Get ( - Objects_Id id, - Objects_Locations *location -); - -#include <rtems/message.inl> -#include <rtems/msgmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/modes.h b/cpukit/rtems/include/rtems/rtems/modes.h deleted file mode 100644 index 9e714591ab..0000000000 --- a/cpukit/rtems/include/rtems/rtems/modes.h +++ /dev/null @@ -1,183 +0,0 @@ -/* modes.h - * - * This include file contains all constants and structures associated - * with the RTEMS thread and RTEMS_ASR modes. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_MODES_h -#define __RTEMS_MODES_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/isr.h> - -/* - * The following type defines the control block used to manage - * each a mode set. - */ - -typedef unsigned32 rtems_mode; - -/* - * The following constants define the individual modes and masks - * which may be used to compose a mode set and to alter modes. - */ - -#define RTEMS_ALL_MODE_MASKS 0x0000ffff - -#define RTEMS_DEFAULT_MODES 0x00000000 -#define RTEMS_CURRENT_MODE 0 - -#define RTEMS_PREEMPT_MASK 0x00000100 /* preemption bit */ -#define RTEMS_TIMESLICE_MASK 0x00000200 /* timeslice bit */ -#define RTEMS_ASR_MASK 0x00000400 /* RTEMS_ASR enable bit */ -#define RTEMS_INTERRUPT_MASK CPU_MODES_INTERRUPT_MASK - -#define RTEMS_PREEMPT 0x00000000 /* enable preemption */ -#define RTEMS_NO_PREEMPT 0x00000100 /* disable preemption */ - -#define RTEMS_NO_TIMESLICE 0x00000000 /* disable timeslicing */ -#define RTEMS_TIMESLICE 0x00000200 /* enable timeslicing */ - -#define RTEMS_ASR 0x00000000 /* enable RTEMS_ASR */ -#define RTEMS_NO_ASR 0x00000400 /* disable RTEMS_ASR */ - -/* - * The number of bits for interrupt levels is CPU dependent. - * RTEMS supports 0 to 256 levels in bits 0-7 of the mode. - */ - -/* - * RTEMS_INTERRUPT_LEVEL - * - * DESCRIPTION: - * - * This function returns the processor dependent interrupt - * level which corresponds to the requested interrupt level. - * - * NOTE: RTEMS supports 256 interrupt levels using the least - * significant eight bits of MODES.CONTROL. On any - * particular CPU, fewer than 256 levels may be supported. - */ - -STATIC INLINE unsigned32 RTEMS_INTERRUPT_LEVEL ( - rtems_mode mode_set -); - -/* - * _Modes_Mask_changed - * - * DESCRIPTION: - * - * This function returns TRUE if any of the mode flags in mask - * are set in mode_set, and FALSE otherwise. - */ - -STATIC INLINE boolean _Modes_Mask_changed ( - rtems_mode mode_set, - rtems_mode masks -); - -/* - * _Modes_Is_asr_disabled - * - * DESCRIPTION: - * - * This function returns TRUE if mode_set indicates that Asynchronous - * Signal Processing is disabled, and FALSE otherwise. - */ - -STATIC INLINE boolean _Modes_Is_asr_disabled ( - rtems_mode mode_set -); - -/* - * _Modes_Is_preempt - * - * DESCRIPTION: - * - * This function returns TRUE if mode_set indicates that preemption - * is enabled, and FALSE otherwise. - */ - -STATIC INLINE boolean _Modes_Is_preempt ( - rtems_mode mode_set -); - -/* - * _Modes_Is_timeslice - * - * DESCRIPTION: - * - * This function returns TRUE if mode_set indicates that timeslicing - * is enabled, and FALSE otherwise. - */ - -STATIC INLINE boolean _Modes_Is_timeslice ( - rtems_mode mode_set -); - -/* - * _Modes_Get_interrupt_level - * - * DESCRIPTION: - * - * This function returns the interrupt level portion of the mode_set. - */ - -STATIC INLINE ISR_Level _Modes_Get_interrupt_level ( - rtems_mode mode_set -); - -/* - * _Modes_Set_interrupt_level - * - * DESCRIPTION: - * - * This routine sets the current interrupt level to that specified - * in the mode_set. - */ - -STATIC INLINE void _Modes_Set_interrupt_level ( - rtems_mode mode_set -); - -/* - * _Modes_Change - * - * DESCRIPTION: - * - * This routine changes the modes in old_mode_set indicated by - * mask to the requested values in new_mode_set. The resulting - * mode set is returned in out_mode_set and the modes that changed - * is returned in changed. - */ - -STATIC INLINE void _Modes_Change ( - rtems_mode old_mode_set, - rtems_mode new_mode_set, - rtems_mode mask, - rtems_mode *out_mode_set, - rtems_mode *changed -); - -#include <rtems/modes.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/mp.h b/cpukit/rtems/include/rtems/rtems/mp.h deleted file mode 100644 index 96147d3b44..0000000000 --- a/cpukit/rtems/include/rtems/rtems/mp.h +++ /dev/null @@ -1,67 +0,0 @@ -/* mp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_MP_h -#define __RTEMS_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * - * _Multiprocessing_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Multiprocessing_Manager_initialization ( void ); - -/* - * - * rtems_multiprocessing_announce - * - * DESCRIPTION: - * - * This routine implements the MULTIPROCESSING_ANNOUNCE directive. - * It is invoked by the MPCI layer to indicate that an MPCI packet - * has been received. - */ - -void rtems_multiprocessing_announce ( void ); - -/* - * - * _Multiprocessing_Receive_server - * - * DESCRIPTION: - * - * This routine is a server thread which processes remote requests - * from other nodes. - */ - -Thread _Multiprocessing_Receive_server ( - Thread_Argument ignored -); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/msgmp.h b/cpukit/rtems/include/rtems/rtems/msgmp.h deleted file mode 100644 index 486bf00002..0000000000 --- a/cpukit/rtems/include/rtems/rtems/msgmp.h +++ /dev/null @@ -1,175 +0,0 @@ -/* msgmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Message Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_MESSAGE_QUEUE_MP_h -#define __RTEMS_MESSAGE_QUEUE_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/message.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type defines the list of - * remote message queue operations. - */ - -typedef enum { - MESSAGE_QUEUE_MP_ANNOUNCE_CREATE = 0, - MESSAGE_QUEUE_MP_ANNOUNCE_DELETE = 1, - MESSAGE_QUEUE_MP_EXTRACT_PROXY = 2, - MESSAGE_QUEUE_MP_RECEIVE_REQUEST = 3, - MESSAGE_QUEUE_MP_RECEIVE_RESPONSE = 4, - MESSAGE_QUEUE_MP_SEND_REQUEST = 5, - MESSAGE_QUEUE_MP_SEND_RESPONSE = 6, - MESSAGE_QUEUE_MP_URGENT_REQUEST = 7, - MESSAGE_QUEUE_MP_URGENT_RESPONSE = 8, - MESSAGE_QUEUE_MP_BROADCAST_REQUEST = 9, - MESSAGE_QUEUE_MP_BROADCAST_RESPONSE = 10, - MESSAGE_QUEUE_MP_FLUSH_REQUEST = 11, - MESSAGE_QUEUE_MP_FLUSH_RESPONSE = 12 -} Message_queue_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote message queue operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Message_queue_MP_Remote_operations operation; - Objects_Name name; - rtems_option option_set; - Objects_Id proxy_id; - unsigned32 count; - unsigned32 pad0; - unsigned32 pad1; - unsigned32 pad2; - Message_queue_Buffer Buffer; -} Message_queue_MP_Packet; - -/* - * _Message_queue_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - */ - -void _Message_queue_MP_Send_process_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Objects_Name name, - Objects_Id proxy_id -); - -/* - * _Message_queue_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Message_queue_MP_Send_request_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Message_queue_Buffer *buffer, - rtems_option option_set, - rtems_interval timeout -); - -/* - * _Message_queue_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Message_queue_MP_Send_response_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Thread_Control *the_thread -); - -/* - * - * _Message_queue_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Message_queue_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Message_queue_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - */ - -void _Message_queue_MP_Send_object_was_deleted ( - Thread_Control *the_proxy -); - -/* - * _Message_queue_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - */ - -void _Message_queue_MP_Send_extract_proxy ( - Thread_Control *the_thread -); - -/* - * _Message_queue_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a message queue mp packet. - */ - -Message_queue_MP_Packet *_Message_queue_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/options.h b/cpukit/rtems/include/rtems/rtems/options.h deleted file mode 100644 index b318aad8c9..0000000000 --- a/cpukit/rtems/include/rtems/rtems/options.h +++ /dev/null @@ -1,79 +0,0 @@ -/* options.h - * - * This include file contains information which defines the - * options available on many directives. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_OPTIONS_h -#define __RTEMS_OPTIONS_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * The following type defines the control block used to manage - * option sets. - */ - -typedef unsigned32 rtems_option; - -/* - * The following constants define the individual options which may - * be used to compose an option set. - */ - -#define RTEMS_DEFAULT_OPTIONS 0x00000000 - -#define RTEMS_WAIT 0x00000000 /* wait on resource */ -#define RTEMS_NO_WAIT 0x00000001 /* do not wait on resource */ - -#define RTEMS_EVENT_ALL 0x00000000 /* wait for all events */ -#define RTEMS_EVENT_ANY 0x00000002 /* wait on any event */ - -/* - * _Options_Is_no_wait - * - * DESCRIPTION: - * - * This function returns TRUE if the RTEMS_NO_WAIT option is enabled in - * option_set, and FALSE otherwise. - * - */ - -STATIC INLINE boolean _Options_Is_no_wait ( - rtems_option option_set -); - -/* - * _Options_Is_any - * - * DESCRIPTION: - * - * This function returns TRUE if the RTEMS_EVENT_ANY option is enabled in - * OPTION_SET, and FALSE otherwise. - * - */ - -STATIC INLINE boolean _Options_Is_any ( - rtems_option option_set -); - -#include <rtems/options.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/part.h b/cpukit/rtems/include/rtems/rtems/part.h deleted file mode 100644 index e639029dc8..0000000000 --- a/cpukit/rtems/include/rtems/rtems/part.h +++ /dev/null @@ -1,290 +0,0 @@ -/* partition.h - * - * This include file contains all the constants and structures associated - * with the Partition Manager. This manager provides facilities to - * dynamically allocate memory in fixed-sized units which are returned - * as buffers. - * - * Directives provided are: - * - * + create a partition - * + get an ID of a partition - * + delete a partition - * + get a buffer from a partition - * + return a buffer to a partition - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_PARTITION_h -#define __RTEMS_PARTITION_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/address.h> -#include <rtems/attr.h> -#include <rtems/object.h> - -/* - * The following defines the control block used to manage each partition. - */ - -typedef struct { - Objects_Control Object; - void *starting_address; /* physical address */ - unsigned32 length; /* in bytes */ - unsigned32 buffer_size; /* in bytes */ - rtems_attribute attribute_set; /* attributes */ - unsigned32 number_of_used_blocks; /* or allocated buffers */ - Chain_Control Memory; /* buffer chain */ -} Partition_Control; - -/* - * The following defines the information control block used to - * manage this class of objects. - */ - -EXTERN Objects_Information _Partition_Information; - -/* - * _Partition_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Partition_Manager_initialization( - unsigned32 maximum_partitions -); - -/* - * rtems_partition_create - * - * DESCRIPTION: - * - * This routine implements the rtems_partition_create directive. The - * partition will have the name name. The memory area managed by - * the partition is of length bytes and starts at starting_address. - * The memory area will be divided into as many buffers of - * buffer_size bytes as possible. The attribute_set determines if - * the partition is global or local. It returns the id of the - * created partition in ID. - */ - -rtems_status_code rtems_partition_create( - Objects_Name name, - void *starting_address, - unsigned32 length, - unsigned32 buffer_size, - rtems_attribute attribute_set, - Objects_Id *id -); - -/* - * rtems_partition_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_partition_ident directive. - * This directive returns the partition ID associated with name. - * If more than one partition is named name, then the partition - * to which the ID belongs is arbitrary. node indicates the - * extent of the search for the ID of the partition named name. - * The search can be limited to a particular node or allowed to - * encompass all nodes. - */ - -rtems_status_code rtems_partition_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -); - -/* - * rtems_partition_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_partition_delete directive. The - * partition indicated by ID is deleted. - */ - -rtems_status_code rtems_partition_delete( - Objects_Id id -); - -/* - * rtems_partition_get_buffer - * - * DESCRIPTION: - * - * This routine implements the rtems_partition_get_buffer directive. It - * attempts to allocate a buffer from the partition associated with ID. - * If a buffer is allocated, its address is returned in buffer. - */ - -rtems_status_code rtems_partition_get_buffer( - Objects_Id id, - void **buffer -); - -/* - * rtems_partition_return_buffer - * - * DESCRIPTION: - * - * This routine implements the rtems_partition_return_buffer directive. It - * frees the buffer to the partition associated with ID. The buffer must - * have been previously allocated from the same partition. - */ - -rtems_status_code rtems_partition_return_buffer( - Objects_Id id, - void *buffer -); - -/* - * _Partition_Allocate_buffer - * - * DESCRIPTION: - * - * This function attempts to allocate a buffer from the_partition. - * If successful, it returns the address of the allocated buffer. - * Otherwise, it returns NULL. - */ - -STATIC INLINE void *_Partition_Allocate_buffer ( - Partition_Control *the_partition -); - -/* - * _Partition_Free_buffer - * - * DESCRIPTION: - * - * This routine frees the_buffer to the_partition. - */ - -STATIC INLINE void _Partition_Free_buffer ( - Partition_Control *the_partition, - Chain_Node *the_buffer -); - -/* - * _Partition_Is_buffer_on_boundary - * - * DESCRIPTION: - * - * This function returns TRUE if the_buffer is on a valid buffer - * boundary for the_partition, and FALSE otherwise. - */ - -STATIC INLINE boolean _Partition_Is_buffer_on_boundary ( - void *the_buffer, - Partition_Control *the_partition -); - -/* - * _Partition_Is_buffer_valid - * - * DESCRIPTION: - * - * This function returns TRUE if the_buffer is a valid buffer from - * the_partition, otherwise FALSE is returned. - */ - -STATIC INLINE boolean _Partition_Is_buffer_valid ( - Chain_Node *the_buffer, - Partition_Control *the_partition -); - -/* - * _Partition_Is_buffer_size_aligned - * - * DESCRIPTION: - * - * This function returns TRUE if the use of the specified buffer_size - * will result in the allocation of buffers whose first byte is - * properly aligned, and FALSE otherwise. - */ - -STATIC INLINE boolean _Partition_Is_buffer_size_aligned ( - unsigned32 buffer_size -); - -/* - * _Partition_Allocate - * - * DESCRIPTION: - * - * This function allocates a partition control block from - * the inactive chain of free partition control blocks. - */ - -STATIC INLINE Partition_Control *_Partition_Allocate ( void ); - -/* - * _Partition_Free - * - * DESCRIPTION: - * - * This routine frees a partition control block to the - * inactive chain of free partition control blocks. - */ - -STATIC INLINE void _Partition_Free ( - Partition_Control *the_partition -); - -/* - * _Partition_Get - * - * DESCRIPTION: - * - * This function maps partition IDs to partition control blocks. - * If ID corresponds to a local partition, then it returns - * the_partition control pointer which maps to ID and location - * is set to OBJECTS_LOCAL. If the partition ID is global and - * resides on a remote node, then location is set to OBJECTS_REMOTE, - * and the_partition is undefined. Otherwise, location is set - * to OBJECTS_ERROR and the_partition is undefined. - */ - -STATIC INLINE Partition_Control *_Partition_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Partition_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_partition is NULL - * and FALSE otherwise. - */ - -STATIC INLINE boolean _Partition_Is_null ( - Partition_Control *the_partition -); - -#include <rtems/part.inl> -#include <rtems/partmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/partmp.h b/cpukit/rtems/include/rtems/rtems/partmp.h deleted file mode 100644 index deacaf7bd1..0000000000 --- a/cpukit/rtems/include/rtems/rtems/partmp.h +++ /dev/null @@ -1,160 +0,0 @@ -/* partmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Partition Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_PARTITION_MP_h -#define __RTEMS_PARTITION_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/part.h> -#include <rtems/thread.h> - -/* - * The following enumerated type defines the list of - * remote partition operations. - */ - -typedef enum { - PARTITION_MP_ANNOUNCE_CREATE = 0, - PARTITION_MP_ANNOUNCE_DELETE = 1, - PARTITION_MP_EXTRACT_PROXY = 2, - PARTITION_MP_GET_BUFFER_REQUEST = 3, - PARTITION_MP_GET_BUFFER_RESPONSE = 4, - PARTITION_MP_RETURN_BUFFER_REQUEST = 5, - PARTITION_MP_RETURN_BUFFER_RESPONSE = 6, -} Partition_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote partition operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Partition_MP_Remote_operations operation; - Objects_Name name; - void *buffer; - Objects_Id proxy_id; -} Partition_MP_Packet; - -/* - * _Partition_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - */ - -void _Partition_MP_Send_process_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - Objects_Name name, - Objects_Id proxy_id -); - -/* - * _Partition_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Partition_MP_Send_request_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - void *buffer -); - -/* - * _Partition_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Partition_MP_Send_response_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - Thread_Control *the_thread -); - -/* - * - * _Partition_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Partition_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Partition_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - * - * This routine is not needed by the Partition since a partition - * cannot be deleted when buffers are in use. - */ - -/* - * _Partition_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - */ - -void _Partition_MP_Send_extract_proxy ( - Thread_Control *the_thread -); - -/* - * _Partition_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a partition mp packet. - */ - -Partition_MP_Packet *_Partition_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/ratemon.h b/cpukit/rtems/include/rtems/rtems/ratemon.h deleted file mode 100644 index 86acfb9a38..0000000000 --- a/cpukit/rtems/include/rtems/rtems/ratemon.h +++ /dev/null @@ -1,285 +0,0 @@ -/* ratemon.h - * - * This include file contains all the constants, structures, and - * prototypes associated with the Rate Monotonic Manager. This manager - * provides facilities to implement tasks which execute in a periodic fashion. - * - * Directives provided are: - * - * + create a rate monotonic timer - * + cancel a period - * + delete a rate monotonic timer - * + conclude current and start the next period - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_RATE_MONOTONIC_h -#define __RTEMS_RATE_MONOTONIC_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/object.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type defines the states in which a - * period may be. - */ - -typedef enum { - RATE_MONOTONIC_INACTIVE, /* off chain, never initialized */ - RATE_MONOTONIC_ACTIVE, /* on chain, running continuously */ - RATE_MONOTONIC_EXPIRED /* off chain, will be reset by next rm_period */ -} Rate_Monotonic_Period_states; - -/* - * The following constant is the interval passed to the rate_monontonic_period - * directive to obtain status information. - */ - -#define RTEMS_PERIOD_STATUS RTEMS_NO_TIMEOUT - -/* - * The following structure defines the control block used to manage - * each period. - */ - -typedef struct { - Objects_Control Object; - Watchdog_Control Timer; - Rate_Monotonic_Period_states state; - Thread_Control *owner; -} Rate_monotonic_Control; - -EXTERN Objects_Information _Rate_monotonic_Information; - -/* - * _Rate_monotonic_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Rate_monotonic_Manager_initialization( - unsigned32 maximum_periods -); - -/* - * rtems_rate_monotonic_create - * - * DESCRIPTION: - * - * This routine implements the rate_monotonic_create directive. The - * period will have the name name. It returns the id of the - * created period in ID. - */ - -rtems_status_code rtems_rate_monotonic_create( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_rate_monotonic_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_rate_monotonic_ident directive. - * This directive returns the period ID associated with name. - * If more than one period is named name, then the period - * to which the ID belongs is arbitrary. - */ - -rtems_status_code rtems_rate_monotonic_ident( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_rate_monotonic_cancel - * - * DESCRIPTION: - * - * This routine implements the rtems_rate_monotonic_cancel directive. This - * directive stops the period associated with ID from continuing to - * run. - */ - -rtems_status_code rtems_rate_monotonic_cancel( - Objects_Id id -); - -/* - * rtems_rate_monotonic_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_rate_monotonic_delete directive. The - * period indicated by ID is deleted. - */ - -rtems_status_code rtems_rate_monotonic_delete( - Objects_Id id -); - -/* - * rtems_rate_monotonic_period - * - * DESCRIPTION: - * - * This routine implements the rtems_rate_monotonic_period directive. When - * length is non-zero, this directive initiates the period associated with - * ID from continuing for a period of length. If length is zero, then - * result is set to indicate the current state of the period. - */ - -rtems_status_code rtems_rate_monotonic_period( - Objects_Id id, - rtems_interval length -); - -/* - * _Rate_monotonic_Allocate - * - * DESCRIPTION: - * - * This function allocates a period control block from - * the inactive chain of free period control blocks. - */ - -STATIC INLINE Rate_monotonic_Control *_Rate_monotonic_Allocate( void ); - -/* - * _Rate_monotonic_Free - * - * DESCRIPTION: - * - * This routine allocates a period control block from - * the inactive chain of free period control blocks. - */ - -STATIC INLINE void _Rate_monotonic_Free ( - Rate_monotonic_Control *the_period -); - -/* - * _Rate_monotonic_Get - * - * DESCRIPTION: - * - * This function maps period IDs to period control blocks. - * If ID corresponds to a local period, then it returns - * the_period control pointer which maps to ID and location - * is set to OBJECTS_LOCAL. Otherwise, location is set - * to OBJECTS_ERROR and the_period is undefined. - */ - -STATIC INLINE Rate_monotonic_Control *_Rate_monotonic_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Rate_monotonic_Set_state - * - * DESCRIPTION: - * - * This function blocks the calling task so that it is waiting for - * a period to expire. It returns TRUE if the task was successfully - * blocked, and FALSE otherwise. - */ - -boolean _Rate_monotonic_Set_state( - Rate_monotonic_Control *the_period -); - -/* - * _Rate_monotonic_Timeout - * - * DESCRIPTION: - * - * This routine is invoked when the period represented - * by ID expires. If the task which owns this period is blocked - * waiting for the period to expire, then it is readied and the - * period is restarted. If the owning task is not waiting for the - * period to expire, then the period is placed in the EXPIRED - * state and not restarted. - */ - -void _Rate_monotonic_Timeout ( - Objects_Id id, - void *ignored -); - -/* - * _Rate_monotonic_Is_active - * - * DESCRIPTION: - * - * This function returns TRUE if the_period is in the ACTIVE state, - * and FALSE otherwise. - */ - -STATIC INLINE boolean _Rate_monotonic_Is_active ( - Rate_monotonic_Control *the_period -); - -/* - * _Rate_monotonic_Is_inactive - * - * DESCRIPTION: - * - * This function returns TRUE if the_period is in the ACTIVE state, - * and FALSE otherwise. - */ - -STATIC INLINE boolean _Rate_monotonic_Is_inactive ( - Rate_monotonic_Control *the_period -); - -/* - * _Rate_monotonic_Is_expired - * - * DESCRIPTION: - * - * This function returns TRUE if the_period is in the EXPIRED state, - * and FALSE otherwise. - */ - -STATIC INLINE boolean _Rate_monotonic_Is_expired ( - Rate_monotonic_Control *the_period -); - -/* - * _Rate_monotonic_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_period is NULL and FALSE otherwise. - */ - -STATIC INLINE boolean _Rate_monotonic_Is_null ( - Rate_monotonic_Control *the_period -); - -#include <rtems/ratemon.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/region.h b/cpukit/rtems/include/rtems/rtems/region.h deleted file mode 100644 index c31e193c33..0000000000 --- a/cpukit/rtems/include/rtems/rtems/region.h +++ /dev/null @@ -1,311 +0,0 @@ -/* region.h - * - * This include file contains all the constants and structures associated - * with the Region Manager. This manager provides facilities to dynamically - * allocate memory in variable sized units which are returned as segments. - * - * Directives provided are: - * - * + create a region - * + get an ID of a region - * + delete a region - * + get a segment from a region - * + return a segment to a region - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_REGION_h -#define __RTEMS_REGION_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/object.h> -#include <rtems/threadq.h> -#include <rtems/heap.h> -#include <rtems/debug.h> - -/* - * The following records define the control block used to manage - * each region. - */ - -typedef struct { - Objects_Control Object; - Thread_queue_Control Wait_queue; /* waiting threads */ - void *starting_address; /* physical start addr */ - unsigned32 length; /* physical length(bytes) */ - unsigned32 page_size; /* in bytes */ - unsigned32 maximum_segment_size; /* in bytes */ - rtems_attribute attribute_set; - unsigned32 number_of_used_blocks; /* blocks allocated */ - Heap_Control Memory; -} Region_Control; - -/* - * The following defines the information control block used to - * manage this class of objects. - */ - -EXTERN Objects_Information _Region_Information; - -/* - * _Region_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Region_Manager_initialization( - unsigned32 maximum_regions -); - -/* - * rtems_region_create - * - * DESCRIPTION: - * - * This routine implements the rtems_region_create directive. The - * region will have the name name. The memory area managed by - * the region is of length bytes and starts at starting_address. - * The memory area will be divided into as many allocatable units of - * page_size bytes as possible. The attribute_set determines which - * thread queue discipline is used by the region. It returns the - * id of the created region in ID. - */ - -rtems_status_code rtems_region_create( - Objects_Name name, - void *starting_address, - unsigned32 length, - unsigned32 page_size, - rtems_attribute attribute_set, - Objects_Id *id -); - -/* - * rtems_region_extend - * - * DESCRIPTION: - * - * This routine implements the rtems_region_extend directive. The - * region will have the name name. The memory area managed by - * the region will be attempted to be grown by length bytes using - * the memory starting at starting_address. - */ - -rtems_status_code rtems_region_extend( - Objects_Id id, - void *starting_address, - unsigned32 length -); - -/* - * rtems_region_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_region_ident directive. - * This directive returns the region ID associated with name. - * If more than one region is named name, then the region - * to which the ID belongs is arbitrary. - */ - -rtems_status_code rtems_region_ident( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_region_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_region_delete directive. The - * region indicated by ID is deleted. - */ - -rtems_status_code rtems_region_delete( - Objects_Id id -); - -/* - * rtems_region_get_segment - * - * DESCRIPTION: - * - * This routine implements the rtems_region_get_segment directive. It - * attempts to allocate a segment from the region associated with ID. - * If a segment of the requested size can be allocated, its address - * is returned in segment. If no segment is available, then the task - * may return immediately or block waiting for a segment with an optional - * timeout of timeout clock ticks. Whether the task blocks or returns - * immediately is based on the no_wait option in the option_set. - */ - -rtems_status_code rtems_region_get_segment( - Objects_Id id, - unsigned32 size, - rtems_option option_set, - rtems_interval timeout, - void **segment -); - -/* - * rtems_region_get_segment_size - * - * DESCRIPTION: - * - * This routine implements the rtems_region_get_segment_size directive. It - * returns the size in bytes of the specified user memory area. - */ - -rtems_status_code rtems_region_get_segment_size( - Objects_Id id, - void *segment, - unsigned32 *size -); - -/* - * rtems_region_return_segment - * - * DESCRIPTION: - * - * This routine implements the rtems_region_return_segment directive. It - * frees the segment to the region associated with ID. The segment must - * have been previously allocated from the same region. If freeing the - * segment results in enough memory being available to satisfy the - * rtems_region_get_segment of the first blocked task, then that task and as - * many subsequent tasks as possible will be unblocked with their requests - * satisfied. - */ - -rtems_status_code rtems_region_return_segment( - Objects_Id id, - void *segment -); - -/* - * _Region_Allocate - * - * DESCRIPTION: - * - * This function allocates a region control block from - * the inactive chain of free region control blocks. - */ - -STATIC INLINE Region_Control *_Region_Allocate( void ); - -/* - * _Region_Free - * - * DESCRIPTION: - * - * This routine frees a region control block to the - * inactive chain of free region control blocks. - */ - -STATIC INLINE void _Region_Free ( - Region_Control *the_region -); - -/* - * _Region_Get - * - * DESCRIPTION: - * - * This function maps region IDs to region control blocks. - * If ID corresponds to a local region, then it returns - * the_region control pointer which maps to ID and location - * is set to OBJECTS_LOCAL. Otherwise, location is set - * to OBJECTS_ERROR and the_region is undefined. - */ - -STATIC INLINE Region_Control *_Region_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Region_Allocate_segment - * - * DESCRIPTION: - * - * This function attempts to allocate a segment from the_region. - * If successful, it returns the address of the allocated segment. - * Otherwise, it returns NULL. - */ - -STATIC INLINE void *_Region_Allocate_segment ( - Region_Control *the_region, - unsigned32 size -); - -/* - * _Region_Free_segment - * - * DESCRIPTION: - * - * This function frees the_segment to the_region. - */ - -STATIC INLINE boolean _Region_Free_segment ( - Region_Control *the_region, - void *the_segment -); - -/* - * _Region_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_region is NULL and FALSE otherwise. - */ - -STATIC INLINE boolean _Region_Is_null ( - Region_Control *the_region -); - -#include <rtems/region.inl> -#include <rtems/regionmp.h> - -/* - * _Region_Debug_Walk - * - * DESCRIPTION: - * - * This routine is invoked to verify the integrity of a heap associated - * with the_region. - */ - -#ifdef RTEMS_DEBUG - -#define _Region_Debug_Walk( _the_region, _source ) \ - do { \ - if ( _Debug_Is_enabled( RTEMS_DEBUG_REGION ) ) \ - _Heap_Walk( &(_the_region)->Memory, _source, FALSE ); \ - } while ( 0 ) - -#else - -#define _Region_Debug_Walk( _the_region, _source ) - -#endif - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/regionmp.h b/cpukit/rtems/include/rtems/rtems/regionmp.h deleted file mode 100644 index 2810656078..0000000000 --- a/cpukit/rtems/include/rtems/rtems/regionmp.h +++ /dev/null @@ -1,165 +0,0 @@ -/* regionmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Region Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_REGION_MP_h -#define __RTEMS_REGION_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/region.h> -#include <rtems/thread.h> - -/* - * The following enumerated type defines the list of - * remote region operations. - */ - -typedef enum { - REGION_MP_ANNOUNCE_CREATE = 0, - REGION_MP_ANNOUNCE_DELETE = 1, - REGION_MP_EXTRACT_PROXY = 2, - REGION_MP_GET_SEGMENT_REQUEST = 3, - REGION_MP_GET_SEGMENT_RESPONSE = 4, - REGION_MP_RETURN_SEGMENT_REQUEST = 5, - REGION_MP_RETURN_SEGMENT_RESPONSE = 6, -} Region_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote region operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Region_MP_Remote_operations operation; - Objects_Name name; - rtems_option option_set; - unsigned32 size; - Objects_Id proxy_id; - void *segment; -} Region_MP_Packet; - -/* - * _Region_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - */ - -void _Region_MP_Send_process_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - Objects_Name name, - Objects_Id proxy_id -); - -/* - * _Region_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Region_MP_Send_request_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - void *segment, - unsigned32 size, - rtems_option option_set, - rtems_interval timeout -); - -/* - * _Region_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Region_MP_Send_response_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - Thread_Control *the_thread -); - -/* - * - * _Region_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Region_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Region_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - * - * This routine is not needed by the Region since a region - * cannot be deleted when segments are in use. - */ - -/* - * _Region_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - */ - -void _Region_MP_Send_extract_proxy ( - Thread_Control *the_thread -); - -/* - * _Region_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a region mp packet. - */ - -Region_MP_Packet *_Region_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/sem.h b/cpukit/rtems/include/rtems/rtems/sem.h deleted file mode 100644 index 66f5ab82b8..0000000000 --- a/cpukit/rtems/include/rtems/rtems/sem.h +++ /dev/null @@ -1,238 +0,0 @@ -/* semaphore.h - * - * This include file contains all the constants and structures associated - * with the Semaphore Manager. This manager utilizes standard Dijkstra - * counting semaphores to provide synchronization and mutual exclusion - * capabilities. - * - * Directives provided are: - * - * + create a semaphore - * + get an ID of a semaphore - * + delete a semaphore - * + acquire a semaphore - * + release a semaphore - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_SEMAPHORE_h -#define __RTEMS_SEMAPHORE_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/attr.h> -#include <rtems/object.h> -#include <rtems/threadq.h> - -/* - * The following defines the control block used to manage each semaphore. - */ - -typedef struct { - Objects_Control Object; - Thread_queue_Control Wait_queue; - rtems_attribute attribute_set; - unsigned32 count; - unsigned32 nest_count; - Thread_Control *holder; - Objects_Id holder_id; -} Semaphore_Control; - -/* - * The following defines the information control block used to manage - * this class of objects. - */ - -EXTERN Objects_Information _Semaphore_Information; - -/* - * _Semaphore_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Semaphore_Manager_initialization( - unsigned32 maximum_semaphores -); - -/* - * rtems_semaphore_create - * - * DESCRIPTION: - * - * This routine implements the rtems_semaphore_create directive. The - * semaphore will have the name name. The starting count for - * the semaphore is count. The attribute_set determines if - * the semaphore is global or local and the thread queue - * discipline. It returns the id of the created semaphore in ID. - */ - -rtems_status_code rtems_semaphore_create( - Objects_Name name, - unsigned32 count, - rtems_attribute attribute_set, - Objects_Id *id -); - -/* - * rtems_semaphore_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_semaphore_ident directive. - * This directive returns the semaphore ID associated with name. - * If more than one semaphore is named name, then the semaphore - * to which the ID belongs is arbitrary. node indicates the - * extent of the search for the ID of the semaphore named name. - * The search can be limited to a particular node or allowed to - * encompass all nodes. - */ - -rtems_status_code rtems_semaphore_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -); - -/* - * rtems_semaphore_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_semaphore_delete directive. The - * semaphore indicated by ID is deleted. - */ - -rtems_status_code rtems_semaphore_delete( - Objects_Id id -); - -/* - * rtems_semaphore_obtain - * - * DESCRIPTION: - * - * This routine implements the rtems_semaphore_obtain directive. It - * attempts to obtain a unit from the semaphore associated with ID. - * If a unit can be allocated, the calling task will return immediately. - * If no unit is available, then the task may return immediately or - * block waiting for a unit with an optional timeout of timeout - * clock ticks. Whether the task blocks or returns immediately - * is based on the RTEMS_NO_WAIT option in the option_set. - */ - -rtems_status_code rtems_semaphore_obtain( - Objects_Id id, - unsigned32 option_set, - rtems_interval timeout -); - -/* - * rtems_semaphore_release - * - * DESCRIPTION: - * - * This routine implements the rtems_semaphore_release directive. It - * frees a unit to the semaphore associated with ID. If a task was - * blocked waiting for a unit from this semaphore, then that task will - * be readied and the unit given to that task. Otherwise, the unit - * will be returned to the semaphore. - */ - -rtems_status_code rtems_semaphore_release( - Objects_Id id -); - -/* - * _Semaphore_Seize - * - * DESCRIPTION: - * - * This routine attempts to receive a unit from the_semaphore. - * If a unit is available or if the RTEMS_NO_WAIT option is enabled in - * option_set, then the routine returns. Otherwise, the calling task - * is blocked until a unit becomes available. - */ - -boolean _Semaphore_Seize( - Semaphore_Control *the_semaphore, - unsigned32 option_set -); - -/* - * _Semaphore_Allocate - * - * DESCRIPTION: - * - * This function allocates a semaphore control block from - * the inactive chain of free semaphore control blocks. - */ - -STATIC INLINE Semaphore_Control *_Semaphore_Allocate( void ); - -/* - * _Semaphore_Free - * - * DESCRIPTION: - * - * This routine frees a semaphore control block to the - * inactive chain of free semaphore control blocks. - */ - -STATIC INLINE void _Semaphore_Free ( - Semaphore_Control *the_semaphore -); - -/* - * _Semaphore_Get - * - * DESCRIPTION: - * - * This function maps semaphore IDs to semaphore control blocks. - * If ID corresponds to a local semaphore, then it returns - * the_semaphore control pointer which maps to ID and location - * is set to OBJECTS_LOCAL. if the semaphore ID is global and - * resides on a remote node, then location is set to OBJECTS_REMOTE, - * and the_semaphore is undefined. Otherwise, location is set - * to OBJECTS_ERROR and the_semaphore is undefined. - */ - -STATIC INLINE Semaphore_Control *_Semaphore_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Semaphore_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_semaphore is NULL and FALSE otherwise. - */ - -STATIC INLINE boolean _Semaphore_Is_null ( - Semaphore_Control *the_semaphore -); - -#include <rtems/sem.inl> -#include <rtems/semmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/semmp.h b/cpukit/rtems/include/rtems/rtems/semmp.h deleted file mode 100644 index 2d0554c8cc..0000000000 --- a/cpukit/rtems/include/rtems/rtems/semmp.h +++ /dev/null @@ -1,163 +0,0 @@ -/* semmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Semaphore Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_SEMAPHORE_MP_h -#define __RTEMS_SEMAPHORE_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/sem.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type defines the list of - * remote semaphore operations. - */ - -typedef enum { - SEMAPHORE_MP_ANNOUNCE_CREATE = 0, - SEMAPHORE_MP_ANNOUNCE_DELETE = 1, - SEMAPHORE_MP_EXTRACT_PROXY = 2, - SEMAPHORE_MP_OBTAIN_REQUEST = 3, - SEMAPHORE_MP_OBTAIN_RESPONSE = 4, - SEMAPHORE_MP_RELEASE_REQUEST = 5, - SEMAPHORE_MP_RELEASE_RESPONSE = 6, -} Semaphore_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote semaphore operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Semaphore_MP_Remote_operations operation; - Objects_Name name; - rtems_option option_set; - Objects_Id proxy_id; -} Semaphore_MP_Packet; - -/* - * _Semaphore_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - */ - -void _Semaphore_MP_Send_process_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - Objects_Name name, - Objects_Id proxy_id -); - -/* - * _Semaphore_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Semaphore_MP_Send_request_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - rtems_option option_set, - rtems_interval timeout -); - -/* - * _Semaphore_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Semaphore_MP_Send_response_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - Thread_Control *the_thread -); - -/* - * - * _Semaphore_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Semaphore_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Semaphore_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - */ - -void _Semaphore_MP_Send_object_was_deleted ( - Thread_Control *the_proxy -); - -/* - * _Semaphore_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - */ - -void _Semaphore_MP_Send_extract_proxy ( - Thread_Control *the_thread -); - -/* - * _Semaphore_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a semaphore mp packet. - */ - -Semaphore_MP_Packet *_Semaphore_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/signal.h b/cpukit/rtems/include/rtems/rtems/signal.h deleted file mode 100644 index 2466a8f931..0000000000 --- a/cpukit/rtems/include/rtems/rtems/signal.h +++ /dev/null @@ -1,72 +0,0 @@ -/* signal.h - * - * This include file contains all the constants and structures associated - * with the Signal Manager. This manager provides capabilities required - * for asynchronous communication between tasks via signal sets. - * - * Directives provided are: - * - * + establish an asynchronous signal routine - * + send a signal set to a task - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_SIGNAL_h -#define __RTEMS_SIGNAL_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/asr.h> -#include <rtems/modes.h> -#include <rtems/object.h> -#include <rtems/status.h> - -/* - * rtems_signal_catch - * - * DESCRIPTION: - * - * This routine implements the rtems_signal_catch directive. This directive - * is used to establish asr_handler as the Asynchronous Signal Routine - * (RTEMS_ASR) for the calling task. The asr_handler will execute with a - * mode of mode_set. - */ - -rtems_status_code rtems_signal_catch( - rtems_asr_entry asr_handler, - rtems_mode mode_set -); - -/* - * rtems_signal_send - * - * DESCRIPTION: - * - * This routine implements the rtems_signal_send directive. This directive - * sends the signal_set to the task specified by ID. - */ - -rtems_status_code rtems_signal_send( - Objects_Id id, - rtems_signal_set signal_set -); - -#include <rtems/signalmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/signalmp.h b/cpukit/rtems/include/rtems/rtems/signalmp.h deleted file mode 100644 index 36a2d81594..0000000000 --- a/cpukit/rtems/include/rtems/rtems/signalmp.h +++ /dev/null @@ -1,147 +0,0 @@ -/* signalmp.h - * - * This include file contains all the constants and structures associated - * with the Multiprocessing Support in the Signal Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_SIGNAL_MP_h -#define __RTEMS_SIGNAL_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/asr.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type defines the list of - * remote signal operations. - */ - -typedef enum { - SIGNAL_MP_SEND_REQUEST = 0, - SIGNAL_MP_SEND_RESPONSE = 1, -} Signal_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote signal operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - Signal_MP_Remote_operations operation; - rtems_signal_set signal_in; -} Signal_MP_Packet; - -/* - * _Signal_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - * - * This routine is not needed since there are no process - * packets to be sent by this manager. - */ - -/* - * _Signal_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _Signal_MP_Send_request_packet ( - Signal_MP_Remote_operations operation, - Objects_Id task_id, - rtems_signal_set signal_in -); - -/* - * _Signal_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _Signal_MP_Send_response_packet ( - Signal_MP_Remote_operations operation, - Thread_Control *the_thread -); - -/* - * - * _Signal_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _Signal_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _Signal_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - * - * This routine is not needed since there are no objects - * deleted by this manager. - */ - -/* - * _Signal_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - * - * This routine is not needed since there are no objects - * deleted by this manager. - */ - -/* - * _Signal_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a signal mp packet. - */ - -Signal_MP_Packet *_Signal_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/status.h b/cpukit/rtems/include/rtems/rtems/status.h deleted file mode 100644 index 42b8754780..0000000000 --- a/cpukit/rtems/include/rtems/rtems/status.h +++ /dev/null @@ -1,109 +0,0 @@ -/* status.h - * - * This include file contains the status codes returned from the - * executive directives. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_STATUS_h -#define __RTEMS_STATUS_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* types */ - -/* enumerated constants */ - -typedef enum { - RTEMS_SUCCESSFUL = 0, /* successful completion */ - RTEMS_TASK_EXITTED = 1, /* returned from a thread */ - RTEMS_MP_NOT_CONFIGURED = 2, /* multiprocessing not configured */ - RTEMS_INVALID_NAME = 3, /* invalid object name */ - RTEMS_INVALID_ID = 4, /* invalid object id */ - RTEMS_TOO_MANY = 5, /* too many */ - RTEMS_TIMEOUT = 6, /* timed out waiting */ - RTEMS_OBJECT_WAS_DELETED = 7, /* object deleted while waiting */ - RTEMS_INVALID_SIZE = 8, /* specified size was invalid */ - RTEMS_INVALID_ADDRESS = 9, /* address specified is invalid */ - RTEMS_INVALID_NUMBER = 10, /* number was invalid */ - RTEMS_NOT_DEFINED = 11, /* item has not been initialized */ - RTEMS_RESOURCE_IN_USE = 12, /* resources still outstanding */ - RTEMS_UNSATISFIED = 13, /* request not satisfied */ - RTEMS_INCORRECT_STATE = 14, /* thread is in wrong state */ - RTEMS_ALREADY_SUSPENDED = 15, /* thread already in state */ - RTEMS_ILLEGAL_ON_SELF = 16, /* illegal on calling thread */ - RTEMS_ILLEGAL_ON_REMOTE_OBJECT = 17, /* illegal for remote object */ - RTEMS_CALLED_FROM_ISR = 18, /* called from wrong environment */ - RTEMS_INVALID_PRIORITY = 19, /* invalid thread priority */ - RTEMS_INVALID_CLOCK = 20, /* invalid date/time */ - RTEMS_INVALID_NODE = 21, /* invalid node id */ - RTEMS_NOT_CONFIGURED = 22, /* directive not configured */ - RTEMS_NOT_OWNER_OF_RESOURCE = 23, /* not owner of resource */ - RTEMS_NOT_IMPLEMENTED = 24, /* directive not implemented */ - RTEMS_INTERNAL_ERROR = 25, /* RTEMS inconsistency detected */ - RTEMS_PROXY_BLOCKING = 26, /* internal multiprocessing only */ - RTEMS_NO_MEMORY = 27 /* could not get enough memory */ -} rtems_status_code; - -#define RTEMS_STATUS_CODES_FIRST RTEMS_SUCCESSFUL -#define RTEMS_STATUS_CODES_LAST RTEMS_NO_MEMORY - -/* - * rtems_is_status_successful - * - * DESCRIPTION: - * - * This function returns TRUE if the status code is equal to RTEMS_SUCCESSFUL, - * and FALSE otherwise. - */ - -STATIC INLINE boolean rtems_is_status_successful ( - rtems_status_code code -); - -/* - * rtems_are_statuses_equal - * - * DESCRIPTION: - * - * This function returns TRUE if the status code1 is equal to code2, - * and FALSE otherwise. - */ - -STATIC INLINE boolean rtems_are_statuses_equal ( - rtems_status_code code1, - rtems_status_code code2 -); - -/* - * _Status_Is_proxy_blocking - * - * DESCRIPTION: - * - * This function returns TRUE if the status code is equal to the - * status which indicates that a proxy is blocking, and FALSE otherwise. - */ - -STATIC INLINE boolean _Status_Is_proxy_blocking ( - rtems_status_code code -); - -#include <rtems/status.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/taskmp.h b/cpukit/rtems/include/rtems/rtems/taskmp.h deleted file mode 100644 index 57ab50c630..0000000000 --- a/cpukit/rtems/include/rtems/rtems/taskmp.h +++ /dev/null @@ -1,167 +0,0 @@ -/* taskmp.h - * - * This include file contains all the constants and structures associated - * with the multiprocessing support in the task manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_RTEMS_TASKS_MP_h -#define __RTEMS_RTEMS_TASKS_MP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/priority.h> -#include <rtems/tasks.h> -#include <rtems/thread.h> - -/* - * The following enumerated type defines the list of - * remote task operations. - */ - -typedef enum { - RTEMS_TASKS_MP_ANNOUNCE_CREATE = 0, - RTEMS_TASKS_MP_ANNOUNCE_DELETE = 1, - RTEMS_TASKS_MP_SUSPEND_REQUEST = 2, - RTEMS_TASKS_MP_SUSPEND_RESPONSE = 3, - RTEMS_TASKS_MP_RESUME_REQUEST = 4, - RTEMS_TASKS_MP_RESUME_RESPONSE = 5, - RTEMS_TASKS_MP_SET_PRIORITY_REQUEST = 6, - RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE = 7, - RTEMS_TASKS_MP_GET_NOTE_REQUEST = 8, - RTEMS_TASKS_MP_GET_NOTE_RESPONSE = 9, - RTEMS_TASKS_MP_SET_NOTE_REQUEST = 10, - RTEMS_TASKS_MP_SET_NOTE_RESPONSE = 11, -} RTEMS_tasks_MP_Remote_operations; - -/* - * The following data structure defines the packet used to perform - * remote task operations. - */ - -typedef struct { - rtems_packet_prefix Prefix; - RTEMS_tasks_MP_Remote_operations operation; - Objects_Name name; - rtems_task_priority the_priority; - unsigned32 notepad; - unsigned32 note; -} RTEMS_tasks_MP_Packet; - -/* - * _RTEMS_tasks_MP_Send_process_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * process operation can be performed on another node. - */ - -void _RTEMS_tasks_MP_Send_process_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Objects_Id task_id, - Objects_Name name -); - -/* - * _RTEMS_tasks_MP_Send_request_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive operation can be initiated on another node. - */ - -rtems_status_code _RTEMS_tasks_MP_Send_request_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Objects_Id task_id, - rtems_task_priority the_priority, - unsigned32 notepad, - unsigned32 note -); - -/* - * _RTEMS_tasks_MP_Send_response_packet - * - * DESCRIPTION: - * - * This routine performs a remote procedure call so that a - * directive can be performed on another node. - */ - -void _RTEMS_tasks_MP_Send_response_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Thread_Control *the_thread -); - -/* - * - * _RTEMS_tasks_MP_Process_packet - * - * DESCRIPTION: - * - * This routine performs the actions specific to this package for - * the request from another node. - */ - -void _RTEMS_tasks_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -); - -/* - * _RTEMS_tasks_MP_Send_object_was_deleted - * - * DESCRIPTION: - * - * This routine is invoked indirectly by the thread queue - * when a proxy has been removed from the thread queue and - * the remote node must be informed of this. - * - * This routine is not needed by RTEMS_tasks since a task - * cannot be deleted when segments are in use. - */ - -/* - * _RTEMS_tasks_MP_Send_extract_proxy - * - * DESCRIPTION: - * - * This routine is invoked when a task is deleted and it - * has a proxy which must be removed from a thread queue and - * the remote node must be informed of this. - * - * This routine is not needed since there are no objects - * deleted by this manager. - * - */ - -/* - * _RTEMS_tasks_MP_Get_packet - * - * DESCRIPTION: - * - * This function is used to obtain a task mp packet. - */ - -RTEMS_tasks_MP_Packet *_RTEMS_tasks_MP_Get_packet ( void ); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of file */ diff --git a/cpukit/rtems/include/rtems/rtems/tasks.h b/cpukit/rtems/include/rtems/rtems/tasks.h deleted file mode 100644 index d92913548e..0000000000 --- a/cpukit/rtems/include/rtems/rtems/tasks.h +++ /dev/null @@ -1,315 +0,0 @@ -/* tasks.h - * - * This include file contains all constants and structures associated - * with RTEMS tasks. This manager provides a comprehensive set of directives - * to create, delete, and administer tasks. - * - * Directives provided are: - * - * + create a task - * + get an ID of a task - * + start a task - * + restart a task - * + delete a task - * + suspend a task - * + resume a task - * + set a task's priority - * + change the current task's mode - * + get a task notepad entry - * + set a task notepad entry - * + wake up after interval - * + wake up when specified - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_RTEMS_TASKS_h -#define __RTEMS_RTEMS_TASKS_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/message.h> -#include <rtems/object.h> -#include <rtems/part.h> -#include <rtems/region.h> -#include <rtems/sem.h> -#include <rtems/states.h> -#include <rtems/thread.h> -#include <rtems/threadq.h> - -/* - * Constant to be used as the ID of current task - */ - -#define RTEMS_SELF OBJECTS_ID_OF_SELF - -/* - * This constant is passed to the rtems_task_wake_after directive as the - * interval when a task wishes to yield the CPU. - */ - -#define RTEMS_YIELD_PROCESSOR RTEMS_NO_TIMEOUT - -/* - * rtems_task_create - * - * DESCRIPTION: - * - * This routine implements the rtems_task_create directive. The task - * will have the name name. The attribute_set can be used to indicate - * that the task will be globally accessible or utilize floating point. - * The task's stack will be stack_size bytes. The task will begin - * execution with initial_priority and initial_modes. It returns the - * id of the created task in ID. - */ - -rtems_status_code rtems_task_create( - Objects_Name name, - rtems_task_priority initial_priority, - unsigned32 stack_size, - rtems_mode initial_modes, - rtems_attribute attribute_set, - Objects_Id *id -); - -/* - * rtems_task_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_task_ident directive. - * This directive returns the task ID associated with name. - * If more than one task is named name, then the task to - * which the ID belongs is arbitrary. node indicates the - * extent of the search for the ID of the task named name. - * The search can be limited to a particular node or allowed to - * encompass all nodes. - */ - -rtems_status_code rtems_task_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -); - -/* - * rtems_task_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_task_delete directive. The - * task indicated by ID is deleted. - */ - -rtems_status_code rtems_task_delete( - Objects_Id id -); - -/* - * rtems_task_get_note - * - * DESCRIPTION: - * - * This routine implements the rtems_task_get_note directive. The - * value of the indicated notepad for the task associated with ID - * is returned in note. - */ - -rtems_status_code rtems_task_get_note( - Objects_Id id, - unsigned32 notepad, - unsigned32 *note -); - -/* - * rtems_task_set_note - * - * DESCRIPTION: - * - * This routine implements the rtems_task_set_note directive. The - * value of the indicated notepad for the task associated with ID - * is returned in note. - */ - -rtems_status_code rtems_task_set_note( - Objects_Id id, - unsigned32 notepad, - unsigned32 note -); - -/* - * rtems_task_mode - * - * DESCRIPTION: - * - * This routine implements the rtems_task_mode directive. The current - * values of the modes indicated by mask of the calling task are changed - * to that indicated in mode_set. The former mode of the task is - * returned in mode_set. - */ - -rtems_status_code rtems_task_mode( - rtems_mode mode_set, - rtems_mode mask, - rtems_mode *previous_mode_set -); - -/* - * rtems_task_restart - * - * DESCRIPTION: - * - * This routine implements the rtems_task_restart directive. The - * task associated with ID is restarted at its initial entry - * point with the new argument. - */ - -rtems_status_code rtems_task_restart( - Objects_Id id, - unsigned32 arg -); - -/* - * rtems_task_suspend - * - * DESCRIPTION: - * - * This routine implements the rtems_task_suspend directive. The - * SUSPENDED state is set for task associated with ID. - */ - -rtems_status_code rtems_task_suspend( - Objects_Id id -); - -/* - * rtems_task_resume - * - * DESCRIPTION: - * - * This routine implements the rtems_task_resume Directive. The - * SUSPENDED state is cleared for task associated with ID. - */ - -rtems_status_code rtems_task_resume( - Objects_Id id -); - -/* - * rtems_task_set_priority - * - * DESCRIPTION: - * - * This routine implements the rtems_task_set_priority directive. The - * current priority of the task associated with ID is set to - * new_priority. The former priority of that task is returned - * in old_priority. - */ - -rtems_status_code rtems_task_set_priority( - Objects_Id id, - rtems_task_priority new_priority, - rtems_task_priority *old_priority -); - -/* - * rtems_task_start - * - * DESCRIPTION: - * - * This routine implements the rtems_task_start directive. The - * starting execution point of the task associated with ID is - * set to entry_point with the initial argument. - */ - -rtems_status_code rtems_task_start( - Objects_Id id, - rtems_task_entry entry_point, - unsigned32 argument -); - -/* - * rtems_task_wake_when - * - * DESCRIPTION: - * - * This routine implements the rtems_task_wake_when directive. The - * calling task is blocked until the current time of day is - * equal to that indicated by time_buffer. - */ - -rtems_status_code rtems_task_wake_when( - rtems_time_of_day *time_buffer -); - -/* - * rtems_task_wake_after - * - * DESCRIPTION: - * - * This routine implements the rtems_task_wake_after directive. The - * calling task is blocked until the indicated number of clock - * ticks have occurred. - */ - -rtems_status_code rtems_task_wake_after( - rtems_interval ticks -); - -/* - * _RTEMS_tasks_Allocate - * - * DESCRIPTION: - * - * This function allocates a task control block from - * the inactive chain of free task control blocks. - */ - -STATIC INLINE Thread_Control *_RTEMS_tasks_Allocate( void ); - -/* - * _RTEMS_tasks_Free - * - * DESCRIPTION: - * - * This routine frees a task control block to the - * inactive chain of free task control blocks. - - */ - -STATIC INLINE void _RTEMS_tasks_Free ( - Thread_Control *the_task -); - -/* - * _RTEMS_tasks_Cancel_wait - * - * DESCRIPTION: - * - * This routine unblocks the_thread and cancels any timers - * which the_thread has active. - */ - -STATIC INLINE void _RTEMS_tasks_Cancel_wait( - Thread_Control *the_thread -); - -#include <rtems/tasks.inl> -#include <rtems/taskmp.h> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/include/rtems/rtems/timer.h b/cpukit/rtems/include/rtems/rtems/timer.h deleted file mode 100644 index f6ccb5f4a1..0000000000 --- a/cpukit/rtems/include/rtems/rtems/timer.h +++ /dev/null @@ -1,292 +0,0 @@ -/* timer.h - * - * This include file contains all the constants, structures, and - * prototypes associated with the Timer Manager. This manager provides - * facilities to configure, initiate, cancel, and delete timers which will - * fire at specified intervals of time. - * - * Directives provided are: - * - * + create a timer - * + get an ID of a timer - * + delete a timer - * + set a timer to fire after a number of ticks have passed - * + set a timer to fire when a specified date and time has been reached - * + reset a timer - * + cancel a time - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_TIMER_h -#define __RTEMS_TIMER_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/object.h> -#include <rtems/tod.h> -#include <rtems/watchdog.h> - -/* - * The following enumerated type details the classes to which a timer - * may belong. - */ - -typedef enum { - TIMER_INTERVAL, - TIMER_TIME_OF_DAY, - TIMER_DORMANT -} Timer_Classes; - -/* - * The following defines the type of a Timer Service Routine. - */ - -typedef rtems_timer_service_routine_entry Timer_Service; - -/* - * The following defines the information control block used to manage - * this class of objects. - */ - -EXTERN Objects_Information _Timer_Information; - -/* - * The following records define the control block used to manage - * each timer. - */ - -typedef struct { - Objects_Control Object; - Watchdog_Control Ticker; - Timer_Classes the_class; -} Timer_Control; - -/* - * _Timer_Manager_initialization - * - * DESCRIPTION: - * - * This routine performs the initialization necessary for this manager. - */ - -void _Timer_Manager_initialization( - unsigned32 maximum_timers -); - -/* - * rtems_timer_create - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_create directive. The - * timer will have the name name. It returns the id of the - * created timer in ID. - */ - -rtems_status_code rtems_timer_create( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_timer_ident - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_ident directive. - * This directive returns the timer ID associated with name. - * If more than one timer is named name, then the timer - * to which the ID belongs is arbitrary. - */ - -rtems_status_code rtems_timer_ident( - Objects_Name name, - Objects_Id *id -); - -/* - * rtems_timer_cancel - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_cancel directive. It is used - * to stop the timer associated with ID from firing. - */ - -rtems_status_code rtems_timer_cancel( - Objects_Id id -); - -/* - * rtems_timer_delete - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_delete directive. The - * timer indicated by ID is deleted. - */ - -rtems_status_code rtems_timer_delete( - Objects_Id id -); - -/* - * rtems_timer_fire_after - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_fire_after directive. It - * initiates the timer associated with ID to fire in ticks clock - * ticks. When the timer fires, the routine will be invoked. - */ - -rtems_status_code rtems_timer_fire_after( - Objects_Id id, - rtems_interval ticks, - Timer_Service routine, - void *user_data -); - -/* - * rtems_timer_fire_when - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_fire_when directive. It - * initiates the timer associated with ID to fire at wall_time - * When the timer fires, the routine will be invoked. - */ - -rtems_status_code rtems_timer_fire_when( - Objects_Id id, - rtems_time_of_day *wall_time, - Timer_Service routine, - void *user_data -); - -/* - * rtems_timer_reset - * - * DESCRIPTION: - * - * This routine implements the rtems_timer_reset directive. It is used - * to reinitialize the interval timer associated with ID just as if - * rtems_timer_fire_after were re-invoked with the same arguments that - * were used to initiate this timer. - */ - -rtems_status_code rtems_timer_reset( - Objects_Id id -); - -/* - * _Timer_Allocate - * - * DESCRIPTION: - * - * This function allocates a timer control block from - * the inactive chain of free timer control blocks. - */ - -STATIC INLINE Timer_Control *_Timer_Allocate( void ); - -/* - * _Timer_Free - * - * DESCRIPTION: - * - * This routine frees a timer control block to the - * inactive chain of free timer control blocks. - */ - -STATIC INLINE void _Timer_Free ( - Timer_Control *the_timer -); - -/* - * _Timer_Get - * - * DESCRIPTION: - * - * This function maps timer IDs to timer control blocks. - * If ID corresponds to a local timer, then it returns - * the timer control pointer which maps to ID and location - * is set to OBJECTS_LOCAL. Otherwise, location is set - * to OBJECTS_ERROR and the returned value is undefined. - */ - -STATIC INLINE Timer_Control *_Timer_Get ( - Objects_Id id, - Objects_Locations *location -); - -/* - * _Timer_Is_interval_class - * - * DESCRIPTION: - * - * This function returns TRUE if the class is that of an INTERVAL - * timer, and FALSE otherwise. - */ - -STATIC INLINE boolean _Timer_Is_interval_class ( - Timer_Classes the_class -); - -/* - * _Timer_Is_time_of_day_class - * - * DESCRIPTION: - * - * This function returns TRUE if the class is that of an INTERVAL - * timer, and FALSE otherwise. - */ - -STATIC INLINE boolean _Timer_Is_timer_of_day_class ( - Timer_Classes the_class -); - -/* - * _Timer_Is_dormant_class - * - * DESCRIPTION: - * - * This function returns TRUE if the class is that of a DORMANT - * timer, and FALSE otherwise. - */ - -STATIC INLINE boolean _Timer_Is_dormant_class ( - Timer_Classes the_class -); - -/* - * _Timer_Is_null - * - * DESCRIPTION: - * - * This function returns TRUE if the_timer is NULL and FALSE otherwise. - */ - -STATIC INLINE boolean _Timer_Is_null ( - Timer_Control *the_timer -); - -#include <rtems/timer.inl> - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/asr.inl b/cpukit/rtems/inline/rtems/rtems/asr.inl deleted file mode 100644 index a2da1ae311..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/asr.inl +++ /dev/null @@ -1,105 +0,0 @@ -/* inline/asr.inl - * - * This include file contains the implemenation of all routines - * associated with the asynchronous signal handler which are inlined. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_ASR_inl -#define __INLINE_ASR_inl - -#include <rtems/isr.h> - -/*PAGE - * - * _ASR_Initialize - * - */ - -STATIC INLINE void _ASR_Initialize ( - ASR_Information *information -) -{ - information->handler = NULL; - information->mode_set = RTEMS_DEFAULT_MODES; - information->signals_posted = 0; - information->signals_pending = 0; - information->nest_level = 0; -} - -/*PAGE - * - * _ASR_Swap_signals - * - */ - -STATIC INLINE void _ASR_Swap_signals ( - ASR_Information *information -) -{ - rtems_signal_set _signals; - ISR_Level _level; - - _ISR_Disable( _level ); - _signals = information->signals_pending; - information->signals_pending = information->signals_posted; - information->signals_posted = _signals; - _ISR_Enable( _level ); -} - -/*PAGE - * - * _ASR_Is_null_handler - * - */ - -STATIC INLINE boolean _ASR_Is_null_handler ( - rtems_asr_entry asr_handler -) -{ - return asr_handler == NULL; -} - -/*PAGE - * - * _ASR_Are_signals_pending - * - */ - -STATIC INLINE boolean _ASR_Are_signals_pending ( - ASR_Information *information -) -{ - return information->signals_posted != 0; -} - -/*PAGE - * - * _ASR_Post_signals - * - */ - -STATIC INLINE void _ASR_Post_signals( - rtems_signal_set signals, - rtems_signal_set *signal_set -) -{ - ISR_Level _level; - - _ISR_Disable( _level ); - *signal_set |= signals; - _ISR_Enable( _level ); -} - - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/attr.inl b/cpukit/rtems/inline/rtems/rtems/attr.inl deleted file mode 100644 index c657a08211..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/attr.inl +++ /dev/null @@ -1,125 +0,0 @@ -/* inline/attr.inl - * - * This include file contains all of the inlined routines associated - * with attributes. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_ATTRIBUTES_inl -#define __INLINE_ATTRIBUTES_inl - -/*PAGE - * - * _Attributes_Set - */ - -STATIC INLINE rtems_attribute _Attributes_Set ( - rtems_attribute new_attributes, - rtems_attribute attribute_set -) -{ - return attribute_set | new_attributes; -} - -/*PAGE - * - * _Attributes_Clear - */ - -STATIC INLINE rtems_attribute _Attributes_Clear ( - rtems_attribute attribute_set, - rtems_attribute mask -) -{ - return attribute_set & ~mask; -} - -/*PAGE - * - * _Attributes_Is_floating_point - * - */ - -STATIC INLINE boolean _Attributes_Is_floating_point( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_FLOATING_POINT ); -} - -/*PAGE - * - * _Attributes_Is_global - * - */ - -STATIC INLINE boolean _Attributes_Is_global( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_GLOBAL ); -} - -/*PAGE - * - * _Attributes_Is_priority - * - */ - -STATIC INLINE boolean _Attributes_Is_priority( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_PRIORITY ); -} - -/*PAGE - * - * _Attributes_Is_limit - * - */ - -STATIC INLINE boolean _Attributes_Is_limit( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_LIMIT ); -} - -/*PAGE - * - * _Attributes_Is_binary_semaphore - * - */ - -STATIC INLINE boolean _Attributes_Is_binary_semaphore( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_BINARY_SEMAPHORE ); -} - -/*PAGE - * - * _Attributes_Is_inherit_priority - * - */ - -STATIC INLINE boolean _Attributes_Is_inherit_priority( - rtems_attribute attribute_set -) -{ - return ( attribute_set & RTEMS_INHERIT_PRIORITY ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/dpmem.inl b/cpukit/rtems/inline/rtems/rtems/dpmem.inl deleted file mode 100644 index 829ec5ab07..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/dpmem.inl +++ /dev/null @@ -1,75 +0,0 @@ -/* inline/dpmem.inl - * - * This include file contains the inline routine used in conjunction - * with the Dual Ported Memory Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_DPMEM_inl -#define __INLINE_DPMEM_inl - - -/*PAGE - * - * _Dual_ported_memory_Allocate - * - */ - -STATIC INLINE Dual_ported_memory_Control - *_Dual_ported_memory_Allocate ( void ) -{ - return (Dual_ported_memory_Control *) - _Objects_Allocate( &_Dual_ported_memory_Information ); -} - -/*PAGE - * - * _Dual_ported_memory_Free - * - */ - -STATIC INLINE void _Dual_ported_memory_Free ( - Dual_ported_memory_Control *the_port -) -{ - _Objects_Free( &_Dual_ported_memory_Information, &the_port->Object ); -} - -/*PAGE - * - * _Dual_ported_memory_Get - * - */ - -STATIC INLINE Dual_ported_memory_Control *_Dual_ported_memory_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Dual_ported_memory_Control *) - _Objects_Get( &_Dual_ported_memory_Information, id, location ); -} - -/*PAGE - * - * _Dual_ported_memory_Is_null - */ - -STATIC INLINE boolean _Dual_ported_memory_Is_null( - Dual_ported_memory_Control *the_port -) -{ - return ( the_port == NULL ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/event.inl b/cpukit/rtems/inline/rtems/rtems/event.inl deleted file mode 100644 index 2f2f480001..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/event.inl +++ /dev/null @@ -1,30 +0,0 @@ -/* inline/event.inl - * - * This include file contains the static inline implementation of - * macros for the Event Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MACROS_EVENT_inl -#define __MACROS_EVENT_inl - -/* - * Event_Manager_initialization - */ - -STATIC INLINE void _Event_Manager_initialization( void ) -{ - _Event_Sync = FALSE; -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/eventset.inl b/cpukit/rtems/inline/rtems/rtems/eventset.inl deleted file mode 100644 index b38c61de1a..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/eventset.inl +++ /dev/null @@ -1,71 +0,0 @@ -/* inline/eventset.inl - * - * This include file contains the information pertaining to event sets. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_EVENT_SET_inl -#define __INLINE_EVENT_SET_inl - -/*PAGE - * - * _Event_sets_Is_empty - */ - -STATIC INLINE boolean _Event_sets_Is_empty( - rtems_event_set the_event_set -) -{ - return ( the_event_set == 0 ); -} - -/*PAGE - * - * _Event_sets_Post - */ - -STATIC INLINE void _Event_sets_Post( - rtems_event_set the_new_events, - rtems_event_set *the_event_set -) -{ - *the_event_set |= the_new_events; -} - -/*PAGE - * - * _Event_sets_Get - */ - -STATIC INLINE rtems_event_set _Event_sets_Get( - rtems_event_set the_event_set, - rtems_event_set the_event_condition -) -{ - return ( the_event_set & the_event_condition ); -} - -/*PAGE - * - * _Event_sets_Clear - */ - -STATIC INLINE rtems_event_set _Event_sets_Clear( - rtems_event_set the_event_set, - rtems_event_set the_mask -) -{ - return ( the_event_set & ~(the_mask) ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/message.inl b/cpukit/rtems/inline/rtems/rtems/message.inl deleted file mode 100644 index ee8d5f6cb1..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/message.inl +++ /dev/null @@ -1,160 +0,0 @@ -/* message.inl - * - * This include file contains the static inline implementation of all - * inlined routines in the Message Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MESSAGE_QUEUE_inl -#define __MESSAGE_QUEUE_inl - -/*PAGE - * - * _Message_queue_Copy_buffer - * - */ - -STATIC INLINE void _Message_queue_Copy_buffer ( - Message_queue_Buffer *source, - Message_queue_Buffer *destination -) -{ - *destination = *source; -} - -/*PAGE - * - * _Message_queue_Allocate_message_buffer - * - */ - -STATIC INLINE Message_queue_Buffer_control * - _Message_queue_Allocate_message_buffer ( void ) -{ - return (Message_queue_Buffer_control *) - _Chain_Get( &_Message_queue_Inactive_messages ); -} - -/*PAGE - * - * _Message_queue_Free_message_buffer - * - */ - -STATIC INLINE void _Message_queue_Free_message_buffer ( - Message_queue_Buffer_control *the_message -) -{ - _Chain_Append( &_Message_queue_Inactive_messages, &the_message->Node ); -} - -/*PAGE - * - * _Message_queue_Get_pending_message - * - */ - -STATIC INLINE - Message_queue_Buffer_control *_Message_queue_Get_pending_message ( - Message_queue_Control *the_message_queue -) -{ - return (Message_queue_Buffer_control *) - _Chain_Get_unprotected( &the_message_queue->Pending_messages ); -} - -/*PAGE - * - * _Message_queue_Append - * - */ - -STATIC INLINE void _Message_queue_Append ( - Message_queue_Control *the_message_queue, - Message_queue_Buffer_control *the_message -) -{ - _Chain_Append( &the_message_queue->Pending_messages, &the_message->Node ); -} - -/*PAGE - * - * _Message_queue_Prepend - * - */ - -STATIC INLINE void _Message_queue_Prepend ( - Message_queue_Control *the_message_queue, - Message_queue_Buffer_control *the_message -) -{ - _Chain_Prepend( - &the_message_queue->Pending_messages, - &the_message->Node - ); -} - -/*PAGE - * - * _Message_queue_Is_null - * - */ - -STATIC INLINE boolean _Message_queue_Is_null ( - Message_queue_Control *the_message_queue -) -{ - return ( the_message_queue == NULL ); -} - -/*PAGE - * - * _Message_queue_Allocate - * - */ - -STATIC INLINE Message_queue_Control *_Message_queue_Allocate ( void ) -{ - return (Message_queue_Control *) - _Objects_Allocate( &_Message_queue_Information ); -} - -/*PAGE - * - * _Message_queue_Free - * - */ - -STATIC INLINE void _Message_queue_Free ( - Message_queue_Control *the_message_queue -) -{ - _Objects_Free( &_Message_queue_Information, &the_message_queue->Object ); -} - -/*PAGE - * - * _Message_queue_Get - * - */ - -STATIC INLINE Message_queue_Control *_Message_queue_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Message_queue_Control *) - _Objects_Get( &_Message_queue_Information, id, location ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/modes.inl b/cpukit/rtems/inline/rtems/rtems/modes.inl deleted file mode 100644 index 6331a18a3a..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/modes.inl +++ /dev/null @@ -1,136 +0,0 @@ -/* modes.inl - * - * This include file contains the static inline implementation of the - * inlined routines in the Mode Handler - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MODES_inl -#define __MODES_inl - -/*PAGE - * - * RTEMS_INTERRUPT_LEVEL - */ - -STATIC INLINE unsigned32 RTEMS_INTERRUPT_LEVEL ( - rtems_mode mode_set -) -{ - return mode_set & RTEMS_INTERRUPT_MASK; -} - -/*PAGE - * - * _Modes_Mask_changed - * - */ - -STATIC INLINE boolean _Modes_Mask_changed ( - rtems_mode mode_set, - rtems_mode masks -) -{ - return ( mode_set & masks ); -} - -/*PAGE - * - * _Modes_Is_asr_disabled - * - */ - -STATIC INLINE boolean _Modes_Is_asr_disabled ( - rtems_mode mode_set -) -{ - return ( mode_set & RTEMS_ASR_MASK ); -} - -/*PAGE - * - * _Modes_Is_preempt - * - */ - -STATIC INLINE boolean _Modes_Is_preempt ( - rtems_mode mode_set -) -{ - return ( ( mode_set & RTEMS_PREEMPT_MASK ) == RTEMS_PREEMPT ); -} - -/*PAGE - * - * _Modes_Is_timeslice - * - */ - -STATIC INLINE boolean _Modes_Is_timeslice ( - rtems_mode mode_set -) -{ - return ((mode_set & (RTEMS_TIMESLICE_MASK|RTEMS_PREEMPT_MASK)) == - (RTEMS_TIMESLICE|RTEMS_PREEMPT) ); -} - -/*PAGE - * - * _Modes_Get_interrupt_level - * - */ - -STATIC INLINE ISR_Level _Modes_Get_interrupt_level ( - rtems_mode mode_set -) -{ - return ( mode_set & RTEMS_INTERRUPT_MASK ); -} - -/*PAGE - * - * _Modes_Set_interrupt_level - * - */ - -STATIC INLINE void _Modes_Set_interrupt_level ( - rtems_mode mode_set -) -{ - _ISR_Set_level( _Modes_Get_interrupt_level( mode_set ) ); -} - -/*PAGE - * - * _Modes_Change - * - */ - -STATIC INLINE void _Modes_Change ( - rtems_mode old_mode_set, - rtems_mode new_mode_set, - rtems_mode mask, - rtems_mode *out_mode_set, - rtems_mode *changed -) -{ - rtems_mode _out_mode; - - _out_mode = old_mode_set; - _out_mode &= ~mask; - _out_mode |= new_mode_set & mask; - *changed = _out_mode ^ old_mode_set; - *out_mode_set = _out_mode; -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/options.inl b/cpukit/rtems/inline/rtems/rtems/options.inl deleted file mode 100644 index b3c7312010..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/options.inl +++ /dev/null @@ -1,47 +0,0 @@ -/* options.inl - * - * This file contains the static inline implementation of the inlined - * routines from the Options Handler. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __OPTIONS_inl -#define __OPTIONS_inl - -/*PAGE - * - * _Options_Is_no_wait - * - */ - -STATIC INLINE boolean _Options_Is_no_wait ( - rtems_option option_set -) -{ - return (option_set & RTEMS_NO_WAIT); -} - -/*PAGE - * - * _Options_Is_any - * - */ - -STATIC INLINE boolean _Options_Is_any ( - rtems_option option_set -) -{ - return (option_set & RTEMS_EVENT_ANY); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/part.inl b/cpukit/rtems/inline/rtems/rtems/part.inl deleted file mode 100644 index 78f86dcefc..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/part.inl +++ /dev/null @@ -1,157 +0,0 @@ -/* part.inl - * - * This file contains the macro implementation of all inlined routines - * in the Partition Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __PARTITION_inl -#define __PARTITION_inl - -/*PAGE - * - * _Partition_Allocate_buffer - * - */ - -STATIC INLINE void *_Partition_Allocate_buffer ( - Partition_Control *the_partition -) -{ - return _Chain_Get( &the_partition->Memory ); -} - -/*PAGE - * - * _Partition_Free_buffer - * - */ - -STATIC INLINE void _Partition_Free_buffer ( - Partition_Control *the_partition, - Chain_Node *the_buffer -) -{ - _Chain_Append( &the_partition->Memory, the_buffer ); -} - -/*PAGE - * - * _Partition_Is_buffer_on_boundary - * - */ - -STATIC INLINE boolean _Partition_Is_buffer_on_boundary ( - void *the_buffer, - Partition_Control *the_partition -) -{ - unsigned32 offset; - - offset = (unsigned32) _Addresses_Subtract( - the_buffer, - the_partition->starting_address - ); - - return ((offset % the_partition->buffer_size) == 0); -} - -/*PAGE - * - * _Partition_Is_buffer_valid - * - */ - -STATIC INLINE boolean _Partition_Is_buffer_valid ( - Chain_Node *the_buffer, - Partition_Control *the_partition -) -{ - void *starting; - void *ending; - - starting = the_partition->starting_address; - ending = _Addresses_Add_offset( starting, the_partition->length ); - - return ( - _Addresses_Is_in_range( the_buffer, starting, ending ) && - _Partition_Is_buffer_on_boundary( the_buffer, the_partition ) - ); -} - -/*PAGE - * - * _Partition_Is_buffer_size_aligned - * - */ - -STATIC INLINE boolean _Partition_Is_buffer_size_aligned ( - unsigned32 buffer_size -) -{ - return ((buffer_size % CPU_PARTITION_ALIGNMENT) == 0); -} - -/*PAGE - * - * _Partition_Allocate - * - */ - -STATIC INLINE Partition_Control *_Partition_Allocate ( void ) -{ - return (Partition_Control *) _Objects_Allocate( &_Partition_Information ); -} - -/*PAGE - * - * _Partition_Free - * - */ - -STATIC INLINE void _Partition_Free ( - Partition_Control *the_partition -) -{ - _Objects_Free( &_Partition_Information, &the_partition->Object ); -} - -/*PAGE - * - * _Partition_Get - * - */ - -STATIC INLINE Partition_Control *_Partition_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Partition_Control *) - _Objects_Get( &_Partition_Information, id, location ); -} - -/*PAGE - * - * _Partition_Is_null - * - */ - -STATIC INLINE boolean _Partition_Is_null ( - Partition_Control *the_partition -) -{ - return ( the_partition == NULL ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/ratemon.inl b/cpukit/rtems/inline/rtems/rtems/ratemon.inl deleted file mode 100644 index b748f919b3..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/ratemon.inl +++ /dev/null @@ -1,113 +0,0 @@ -/* ratemon.inl - * - * This file contains the static inline implementation of the inlined - * routines in the Rate Monotonic Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RATE_MONOTONIC_inl -#define __RATE_MONOTONIC_inl - -/*PAGE - * - * _Rate_monotonic_Allocate - * - */ - -STATIC INLINE Rate_monotonic_Control *_Rate_monotonic_Allocate( void ) -{ - return (Rate_monotonic_Control *) - _Objects_Allocate( &_Rate_monotonic_Information ); -} - -/*PAGE - * - * _Rate_monotonic_Free - * - */ - -STATIC INLINE void _Rate_monotonic_Free ( - Rate_monotonic_Control *the_period -) -{ - _Objects_Free( &_Rate_monotonic_Information, &the_period->Object ); -} - -/*PAGE - * - * _Rate_monotonic_Get - * - */ - -STATIC INLINE Rate_monotonic_Control *_Rate_monotonic_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Rate_monotonic_Control *) - _Objects_Get( &_Rate_monotonic_Information, id, location ); -} - -/*PAGE - * - * _Rate_monotonic_Is_active - * - */ - -STATIC INLINE boolean _Rate_monotonic_Is_active ( - Rate_monotonic_Control *the_period -) -{ - return (the_period->state == RATE_MONOTONIC_ACTIVE); -} - -/*PAGE - * - * _Rate_monotonic_Is_inactive - * - */ - -STATIC INLINE boolean _Rate_monotonic_Is_inactive ( - Rate_monotonic_Control *the_period -) -{ - return (the_period->state == RATE_MONOTONIC_INACTIVE); -} - -/*PAGE - * - * _Rate_monotonic_Is_expired - * - */ - -STATIC INLINE boolean _Rate_monotonic_Is_expired ( - Rate_monotonic_Control *the_period -) -{ - return (the_period->state == RATE_MONOTONIC_EXPIRED); -} - -/*PAGE - * - * _Rate_monotonic_Is_null - * - */ - -STATIC INLINE boolean _Rate_monotonic_Is_null ( - Rate_monotonic_Control *the_period -) -{ - return (the_period == NULL); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/region.inl b/cpukit/rtems/inline/rtems/rtems/region.inl deleted file mode 100644 index 5a0e4da1bf..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/region.inl +++ /dev/null @@ -1,101 +0,0 @@ -/* region.inl - * - * This file contains the macro implementation of the inlined - * routines from the Region Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __REGION_inl -#define __REGION_inl - -/*PAGE - * - * _Region_Allocate - * - */ - -STATIC INLINE Region_Control *_Region_Allocate( void ) -{ - return (Region_Control *) _Objects_Allocate( &_Region_Information ); -} - -/*PAGE - * - * _Region_Free - * - */ - -STATIC INLINE void _Region_Free ( - Region_Control *the_region -) -{ - _Objects_Free( &_Region_Information, &the_region->Object ); -} - -/*PAGE - * - * _Region_Get - * - */ - -STATIC INLINE Region_Control *_Region_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Region_Control *) - _Objects_Get( &_Region_Information, id, location ); -} - -/*PAGE - * - * _Region_Allocate_segment - * - */ - -STATIC INLINE void *_Region_Allocate_segment ( - Region_Control *the_region, - unsigned32 size -) -{ - return _Heap_Allocate( &the_region->Memory, size ); -} - -/*PAGE - * - * _Region_Free_segment - * - */ - -STATIC INLINE boolean _Region_Free_segment ( - Region_Control *the_region, - void *the_segment -) -{ - return _Heap_Free( &the_region->Memory, the_segment ); -} - -/*PAGE - * - * _Region_Is_null - * - */ - -STATIC INLINE boolean _Region_Is_null ( - Region_Control *the_region -) -{ - return ( the_region == NULL ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/sem.inl b/cpukit/rtems/inline/rtems/rtems/sem.inl deleted file mode 100644 index 518684a97a..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/sem.inl +++ /dev/null @@ -1,73 +0,0 @@ -/* sem.inl - * - * This file contains the static inlin implementation of the inlined - * routines from the Semaphore Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __SEMAPHORE_inl -#define __SEMAPHORE_inl - -/*PAGE - * - * _Semaphore_Allocate - * - */ - -STATIC INLINE Semaphore_Control *_Semaphore_Allocate( void ) -{ - return (Semaphore_Control *) _Objects_Allocate( &_Semaphore_Information ); -} - -/*PAGE - * - * _Semaphore_Free - * - */ - -STATIC INLINE void _Semaphore_Free ( - Semaphore_Control *the_semaphore -) -{ - _Objects_Free( &_Semaphore_Information, &the_semaphore->Object ); -} - -/*PAGE - * - * _Semaphore_Get - * - */ - -STATIC INLINE Semaphore_Control *_Semaphore_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Semaphore_Control *) - _Objects_Get( &_Semaphore_Information, id, location ); -} - -/*PAGE - * - * _Semaphore_Is_null - * - */ - -STATIC INLINE boolean _Semaphore_Is_null ( - Semaphore_Control *the_semaphore -) -{ - return ( the_semaphore == NULL ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/status.inl b/cpukit/rtems/inline/rtems/rtems/status.inl deleted file mode 100644 index bd158e535b..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/status.inl +++ /dev/null @@ -1,60 +0,0 @@ -/* inline/status.inl - * - * This include file contains the implementations of the inlined - * routines for the status package. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_STATUS_inl -#define __INLINE_STATUS_inl - -/*PAGE - * - * rtems_is_status_successful - * - */ - -STATIC INLINE boolean rtems_is_status_successful( - rtems_status_code code -) -{ - return (code == RTEMS_SUCCESSFUL); -} - -/*PAGE - * - * rtems_are_statuses_equal - * - */ - -STATIC INLINE boolean rtems_are_statuses_equal( - rtems_status_code code1, - rtems_status_code code2 -) -{ - return (code1 == code2); -} - -/* - * _Status_Is_proxy_blocking - * - */ - -STATIC INLINE boolean _Status_Is_proxy_blocking ( - rtems_status_code code -) -{ - return (code == RTEMS_PROXY_BLOCKING); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/tasks.inl b/cpukit/rtems/inline/rtems/rtems/tasks.inl deleted file mode 100644 index d5df18831a..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/tasks.inl +++ /dev/null @@ -1,90 +0,0 @@ -/* tasks.inl - * - * This file contains the static inline implementation of all inlined - * routines in the with RTEMS Tasks Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_TASKS_inl -#define __RTEMS_TASKS_inl - -/*PAGE - * - * _RTEMS_tasks_Allocate - * - */ - -STATIC INLINE Thread_Control *_RTEMS_tasks_Allocate( void ) -{ - return (Thread_Control *) _Objects_Allocate( &_Thread_Information ); -} - -/*PAGE - * - * _RTEMS_tasks_Free - * - */ - -STATIC INLINE void _RTEMS_tasks_Free ( - Thread_Control *the_task -) -{ - _Objects_Free( &_Thread_Information, &the_task->Object ); -} - -/*PAGE - * - * _RTEMS_tasks_Cancel_wait - * - */ - -STATIC INLINE void _RTEMS_tasks_Cancel_wait( - Thread_Control *the_thread -) -{ - States_Control state; - States_Control remote_state; - - state = the_thread->current_state; - - if ( _States_Is_waiting_on_thread_queue( state ) ) { - if ( _States_Is_waiting_for_rpc_reply( state ) && - _States_Is_locally_blocked( state ) ) { - remote_state = _States_Clear( - STATES_WAITING_FOR_RPC_REPLY | STATES_TRANSIENT, - state - ); - - switch ( remote_state ) { - - case STATES_WAITING_FOR_BUFFER: - _Partition_MP_Send_extract_proxy( the_thread ); - break; - case STATES_WAITING_FOR_SEGMENT: - _Region_MP_Send_extract_proxy( the_thread ); - break; - case STATES_WAITING_FOR_SEMAPHORE: - _Semaphore_MP_Send_extract_proxy( the_thread ); - break; - case STATES_WAITING_FOR_MESSAGE: - _Message_queue_MP_Send_extract_proxy( the_thread ); - break; - } - } - _Thread_queue_Extract( the_thread->Wait.queue, the_thread ); - } - else if ( _Watchdog_Is_active( &the_thread->Timer ) ) - (void) _Watchdog_Remove( &the_thread->Timer ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/inline/rtems/rtems/timer.inl b/cpukit/rtems/inline/rtems/rtems/timer.inl deleted file mode 100644 index 7af3b9fa3d..0000000000 --- a/cpukit/rtems/inline/rtems/rtems/timer.inl +++ /dev/null @@ -1,112 +0,0 @@ -/* timer.inl - * - * This file contains the static inline implementation of the inlined routines - * from the Timer Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __TIMER_inl -#define __TIMER_inl - -/*PAGE - * - * _Timer_Allocate - * - */ - -STATIC INLINE Timer_Control *_Timer_Allocate( void ) -{ - return (Timer_Control *) _Objects_Allocate( &_Timer_Information ); -} - -/*PAGE - * - * _Timer_Free - * - */ - -STATIC INLINE void _Timer_Free ( - Timer_Control *the_timer -) -{ - _Objects_Free( &_Timer_Information, &the_timer->Object ); -} - -/*PAGE - * - * _Timer_Get - * - */ - -STATIC INLINE Timer_Control *_Timer_Get ( - Objects_Id id, - Objects_Locations *location -) -{ - return (Timer_Control *) - _Objects_Get( &_Timer_Information, id, location ); -} - -/*PAGE - * - * _Timer_Is_interval_class - * - */ - -STATIC INLINE boolean _Timer_Is_interval_class ( - Timer_Classes the_class -) -{ - return ( the_class == TIMER_INTERVAL ); -} - -/*PAGE - * - * _Timer_Is_time_of_day_class - * - */ - -STATIC INLINE boolean _Timer_Is_timer_of_day_class ( - Timer_Classes the_class -) -{ - return ( the_class == TIMER_TIME_OF_DAY ); -} - -/*PAGE - * - * _Timer_Is_dormant_class - * - */ - -STATIC INLINE boolean _Timer_Is_dormant_class ( - Timer_Classes the_class -) -{ - return ( the_class == TIMER_DORMANT ); -} - -/*PAGE - * - * _Timer_Is_null - * - */ - -STATIC INLINE boolean _Timer_Is_null ( - Timer_Control *the_timer -) -{ - return ( the_timer == NULL ); -} - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/asr.inl b/cpukit/rtems/macros/rtems/rtems/asr.inl deleted file mode 100644 index 421755879b..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/asr.inl +++ /dev/null @@ -1,89 +0,0 @@ -/* macros/asr.h - * - * This include file contains the implemenation of all routines - * associated with the asynchronous signal handler which are inlined. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __INLINE_ASR_h -#define __INLINE_ASR_h - -#include <rtems/isr.h> - -/*PAGE - * - * _ASR_Initialize - * - */ - -#define _ASR_Initialize( _information ) \ -{ \ - (_information)->handler = NULL; \ - (_information)->mode_set = RTEMS_DEFAULT_MODES; \ - (_information)->signals_posted = 0; \ - (_information)->signals_pending = 0; \ - (_information)->nest_level = 0; \ -} - -/*PAGE - * - * _ASR_Swap_signals - * - */ - -#define _ASR_Swap_signals( _information ) \ -{ \ - rtems_signal_set _signals; \ - ISR_Level _level; \ - \ - _ISR_Disable( _level ); \ - _signals = (_information)->signals_pending; \ - (_information)->signals_pending = (_information)->signals_posted; \ - (_information)->signals_posted = _signals; \ - _ISR_Enable( _level ); \ -} - -/*PAGE - * - * _ASR_Is_null_handler - * - */ - -#define _ASR_Is_null_handler( _asr_handler ) \ - ( (_asr_handler) == NULL ) - -/*PAGE - * - * _ASR_Are_signals_pending - * - */ - -#define _ASR_Are_signals_pending( _information ) \ - ( (_information)->signals_posted != 0 ) - -/*PAGE - * - * _ASR_Post_signals - * - */ - -#define _ASR_Post_signals( _signals, _signal_set ) \ - do { \ - ISR_Level _level; \ - \ - _ISR_Disable( _level ); \ - *(_signal_set) |= (_signals); \ - _ISR_Enable( _level ); \ - } while ( 0 ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/attr.inl b/cpukit/rtems/macros/rtems/rtems/attr.inl deleted file mode 100644 index 602622ca35..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/attr.inl +++ /dev/null @@ -1,91 +0,0 @@ -/* macros/attr.h - * - * This include file contains all of the inlined routines associated - * with attributes. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MACROS_ATTRIBUTES_h -#define __MACROS_ATTRIBUTES_h - -/*PAGE - * - * _Attributes_Set - */ - -#define _Attributes_Set( _new_attributes, _attribute_set ) \ - ( (_attribute_set) | (_new_attributes) ) - -/*PAGE - * - * _Attributes_Clear - */ - -#define _Attributes_Clear( _attribute_set, _mask ) \ - ( (_attribute_set) & ~(_mask) ) - -/*PAGE - * - * _Attributes_Is_floating_point - * - */ - -#define _Attributes_Is_floating_point( _attribute_set ) \ - ( (_attribute_set) & RTEMS_FLOATING_POINT ) - -/*PAGE - * - * _Attributes_Is_global - * - */ - -#define _Attributes_Is_global( _attribute_set ) \ - ( (_attribute_set) & RTEMS_GLOBAL ) - -/*PAGE - * - * _Attributes_Is_priority - * - */ - -#define _Attributes_Is_priority( _attribute_set ) \ - ( (_attribute_set) & RTEMS_PRIORITY ) - -/*PAGE - * - * _Attributes_Is_limit - * - */ - -#define _Attributes_Is_limit( _attribute_set ) \ - ( (_attribute_set) & RTEMS_LIMIT ) - -/*PAGE - * - * _Attributes_Is_binary_semaphore - * - */ - -#define _Attributes_Is_binary_semaphore( _attribute_set ) \ - ( (_attribute_set) & RTEMS_BINARY_SEMAPHORE ) - -/*PAGE - * - * _Attributes_Is_inherit_priority - * - */ - -#define _Attributes_Is_inherit_priority( _attribute_set ) \ - ( (_attribute_set) & RTEMS_INHERIT_PRIORITY ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/dpmem.inl b/cpukit/rtems/macros/rtems/rtems/dpmem.inl deleted file mode 100644 index 3e1d7bce95..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/dpmem.inl +++ /dev/null @@ -1,59 +0,0 @@ -/* macros/dpmem.h - * - * This include file contains the inline routine used in conjunction - * with the Dual Ported Memory Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MACROS_DPMEM_h -#define __MACROS_DPMEM_h - -/*PAGE - * - * _Dual_ported_memory_Allocate - * - */ - -#define _Dual_ported_memory_Allocate() \ - (Dual_ported_memory_Control *) \ - _Objects_Allocate( &_Dual_ported_memory_Information ) - -/*PAGE - * - * _Dual_ported_memory_Free - * - */ - -#define _Dual_ported_memory_Free( _the_port ) \ - _Objects_Free( &_Dual_ported_memory_Information, &(_the_port)->Object ) - -/*PAGE - * - * _Dual_ported_memory_Get - * - */ - -#define _Dual_ported_memory_Get( _id, _location ) \ - (Dual_ported_memory_Control *) \ - _Objects_Get( &_Dual_ported_memory_Information, (_id), (_location) ) - - -/*PAGE - * - * _Dual_ported_memory_Is_null - */ - -#define _Dual_ported_memory_Is_null( _the_port ) \ - ( (_the_port) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/event.inl b/cpukit/rtems/macros/rtems/rtems/event.inl deleted file mode 100644 index 1d4cb78237..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/event.inl +++ /dev/null @@ -1,28 +0,0 @@ -/* macros/event.h - * - * This include file contains the implementation of macros for - * the Event Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MACROS_EVENT_h -#define __MACROS_EVENT_h - -/* - * Event_Manager_initialization - */ - -#define _Event_Manager_initialization() \ - _Event_Sync = FALSE - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/eventset.inl b/cpukit/rtems/macros/rtems/rtems/eventset.inl deleted file mode 100644 index 1803d18637..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/eventset.inl +++ /dev/null @@ -1,53 +0,0 @@ -/* eventset.inl - * - * This include file contains the macro implementation of inlined - * routines in the event set object. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __EVENT_SET_inl -#define __EVENT_SET_inl - -/*PAGE - * - * _Event_sets_Is_empty - */ - -#define _Event_sets_Is_empty( _the_event_set ) \ - ((_the_event_set) == 0 ) - -/*PAGE - * - * _Event_sets_Is_empty - */ - -#define _Event_sets_Post( _the_new_events, _the_event_set ) \ - *(_the_event_set) |= (_the_new_events) - -/*PAGE - * - * _Event_sets_Is_empty - */ - -#define _Event_sets_Get( _the_event_set, _the_event_condition ) \ - ((_the_event_set) & (_the_event_condition)) - -/*PAGE - * - * _Event_sets_Clear - */ - -#define _Event_sets_Clear( _the_event_set, _the_mask ) \ - ((_the_event_set) & ~(_the_mask)) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/message.inl b/cpukit/rtems/macros/rtems/rtems/message.inl deleted file mode 100644 index 5415708ac5..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/message.inl +++ /dev/null @@ -1,118 +0,0 @@ -/* message.inl - * - * This include file contains the macro implementation of all - * inlined routines in the Message Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MESSAGE_QUEUE_inl -#define __MESSAGE_QUEUE_inl - -/*PAGE - * - * _Message_queue_Copy_buffer - */ - -#define _Message_queue_Copy_buffer( _source, _destination ) \ - *(Message_queue_Buffer *)(_destination) = \ - *(Message_queue_Buffer *)(_source) - -/*PAGE - * - * _Message_queue_Allocate_message_buffer - * - */ - -#define _Message_queue_Allocate_message_buffer() \ - (Message_queue_Buffer_control *) \ - _Chain_Get( &_Message_queue_Inactive_messages ) - -/*PAGE - * - * _Message_queue_Free_message_buffer - * - */ - -#define _Message_queue_Free_message_buffer( _the_message ) \ - _Chain_Append( &_Message_queue_Inactive_messages, &(_the_message)->Node ) - -/*PAGE - * - * _Message_queue_Get_pending_message - * - */ - -#define _Message_queue_Get_pending_message( _the_message_queue ) \ - (Message_queue_Buffer_control *) \ - _Chain_Get_unprotected( &(_the_message_queue)->Pending_messages ) - -/*PAGE - * - * _Message_queue_Append - * - */ - -#define _Message_queue_Append( _the_message_queue, _the_message ) \ - _Chain_Append( &(_the_message_queue)->Pending_messages, \ - &(_the_message)->Node ) - -/*PAGE - * - * _Message_queue_Prepend - * - */ - -#define _Message_queue_Prepend( _the_message_queue, _the_message ) \ - _Chain_Prepend( &(_the_message_queue)->Pending_messages, \ - &(_the_message)->Node ) - -/*PAGE - * - * _Message_queue_Is_null - * - */ - -#define _Message_queue_Is_null( _the_message_queue ) \ - ( (_the_message_queue) == NULL ) - -/*PAGE - * - * _Message_queue_Allocate - * - */ - -#define _Message_queue_Allocate() \ - (Message_queue_Control *) \ - _Objects_Allocate( &_Message_queue_Information ) - -/*PAGE - * - * _Message_queue_Free - * - */ - -#define _Message_queue_Free( _the_message_queue ) \ - _Objects_Free( &_Message_queue_Information, \ - &(_the_message_queue)->Object ) - -/*PAGE - * - * _Message_queue_Get - * - */ - -#define _Message_queue_Get( _id, _location ) \ - (Message_queue_Control *) \ - _Objects_Get( &_Message_queue_Information, (_id), (_location) ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/modes.inl b/cpukit/rtems/macros/rtems/rtems/modes.inl deleted file mode 100644 index f8ac061dce..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/modes.inl +++ /dev/null @@ -1,101 +0,0 @@ -/* modes.inl - * - * This include file contains the macro implementation of the - * inlined routines in the Mode Handler. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MODES_inl -#define __MODES_inl - -/*PAGE - * - * RTEMS_INTERRUPT_LEVEL - */ - -#define RTEMS_INTERRUPT_LEVEL( _mode_set ) \ - ( (_mode_set) & RTEMS_INTERRUPT_MASK ) - -/*PAGE - * - * _Modes_Mask_changed - * - */ - -#define _Modes_Mask_changed( _mode_set, _masks ) \ - ( (_mode_set) & (_masks) ) - -/*PAGE - * - * _Modes_Is_asr_disabled - * - */ - -#define _Modes_Is_asr_disabled( _mode_set ) \ - ( (_mode_set) & RTEMS_ASR_MASK ) - -/*PAGE - * - * _Modes_Is_preempt - * - */ - -#define _Modes_Is_preempt( _mode_set ) \ - ( ( (_mode_set) & RTEMS_PREEMPT_MASK ) == RTEMS_PREEMPT ) - -/*PAGE - * - * _Modes_Is_timeslice - * - */ - -#define _Modes_Is_timeslice( _mode_set ) \ - (((_mode_set) & (RTEMS_TIMESLICE_MASK|RTEMS_PREEMPT_MASK)) == \ - (RTEMS_TIMESLICE|RTEMS_PREEMPT) ) - -/*PAGE - * - * _Modes_Get_interrupt_level - * - */ - -#define _Modes_Get_interrupt_level( _mode_set ) \ - ( (_mode_set) & RTEMS_INTERRUPT_MASK ) - -/*PAGE - * - * _Modes_Set_interrupt_level - * - */ - -#define _Modes_Set_interrupt_level( _mode_set ) \ - _ISR_Set_level( _Modes_Get_interrupt_level( (_mode_set) ) ) - -/*PAGE - * - * _Modes_Change - * - */ - -#define _Modes_Change( _old_mode_set, _new_mode_set, \ - _mask, _out_mode_set, _changed ) \ - { rtems_mode _out_mode; \ - \ - _out_mode = (_old_mode_set); \ - _out_mode &= ~(_mask); \ - _out_mode |= (_new_mode_set) & (_mask); \ - *(_changed) = _out_mode ^ (_old_mode_set); \ - *(_out_mode_set) = _out_mode; \ - } - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/options.inl b/cpukit/rtems/macros/rtems/rtems/options.inl deleted file mode 100644 index 7c14e4fe4f..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/options.inl +++ /dev/null @@ -1,39 +0,0 @@ -/* options.inl - * - * This file contains the macro implementation of the inlined - * routines from the Options Handler. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __OPTIONS_inl -#define __OPTIONS_inl - -/*PAGE - * - * _Options_Is_no_wait - * - */ - -#define _Options_Is_no_wait( _option_set ) \ - ( (_option_set) & RTEMS_NO_WAIT ) - -/*PAGE - * - * _Options_Is_any - * - */ - -#define _Options_Is_any( _option_set ) \ - ( (_option_set) & RTEMS_EVENT_ANY ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/part.inl b/cpukit/rtems/macros/rtems/rtems/part.inl deleted file mode 100644 index 55c188b210..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/part.inl +++ /dev/null @@ -1,117 +0,0 @@ -/* part.inl - * - * This file contains the macro implementation of all inlined routines - * in the Partition Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __PARTITION_inl -#define __PARTITION_inl - -/*PAGE - * - * _Partition_Allocate_buffer - * - */ - -#define _Partition_Allocate_buffer( _the_partition ) \ - _Chain_Get( &(_the_partition)->Memory ) - -/*PAGE - * - * _Partition_Free_buffer - * - */ - -#define _Partition_Free_buffer( _the_partition, _the_buffer ) \ - _Chain_Append( &(_the_partition)->Memory, (_the_buffer) ) - -/*PAGE - * - * _Partition_Is_buffer_on_boundary - * - */ - -#define _Partition_Is_buffer_on_boundary( _the_buffer, _the_partition ) \ - ((((unsigned32) _Addresses_Subtract( \ - (_the_buffer), \ - (_the_partition)->starting_address ) \ - ) % \ - (_the_partition)->buffer_size) == 0) - -/*PAGE - * - * _Partition_Is_buffer_valid - * - */ - -#define _Partition_Is_buffer_valid( _the_buffer, _the_partition ) \ - ( \ - _Addresses_Is_in_range( \ - (_the_buffer), \ - (_the_partition)->starting_address, \ - _Addresses_Add_offset( \ - (_the_partition)->starting_address, \ - (_the_partition)->length \ - ) \ - ) && \ - _Partition_Is_buffer_on_boundary( (_the_buffer), (_the_partition) ) \ - ) - -/*PAGE - * - * _Partition_Is_buffer_size_aligned - * - */ - -#define _Partition_Is_buffer_size_aligned( _buffer_size ) \ - ((_buffer_size) % CPU_PARTITION_ALIGNMENT == 0) - -/*PAGE - * - * _Partition_Allocate - * - */ - -#define _Partition_Allocate() \ - (Partition_Control *) _Objects_Allocate( &_Partition_Information ) - -/*PAGE - * - * _Partition_Free - * - */ - -#define _Partition_Free( _the_partition ) \ - _Objects_Free( &_Partition_Information, &(_the_partition)->Object ) - -/*PAGE - * - * _Partition_Get - * - */ - -#define _Partition_Get( _id, _location ) \ - (Partition_Control *) \ - _Objects_Get( &_Partition_Information, (_id), (_location) ) - -/*PAGE - * - * _Partition_Is_null - * - */ - -#define _Partition_Is_null( _the_partition ) \ - ( (_the_partition) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/ratemon.inl b/cpukit/rtems/macros/rtems/rtems/ratemon.inl deleted file mode 100644 index ebb182e6f1..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/ratemon.inl +++ /dev/null @@ -1,85 +0,0 @@ -/* ratemon.inl - * - * This file contains the macro implementation of the inlined - * routines in the Rate Monotonic Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RATE_MONOTONIC_inl -#define __RATE_MONOTONIC_inl - -/*PAGE - * - * _Rate_monotonic_Allocate - * - */ - -#define _Rate_monotonic_Allocate() \ - (Rate_monotonic_Control *) \ - _Objects_Allocate( &_Rate_monotonic_Information ) - -/*PAGE - * - * _Rate_monotonic_Free - * - */ - -#define _Rate_monotonic_Free( _the_period ) \ - _Objects_Free( &_Rate_monotonic_Information, &(_the_period)->Object ) - -/*PAGE - * - * _Rate_monotonic_Get - * - */ - -#define _Rate_monotonic_Get( _id, _location ) \ - (Rate_monotonic_Control *) \ - _Objects_Get( &_Rate_monotonic_Information, (_id), (_location) ) - -/*PAGE - * - * _Rate_monotonic_Is_active - * - */ - -#define _Rate_monotonic_Is_active( _the_period ) \ - ((_the_period)->state == RATE_MONOTONIC_ACTIVE) - -/*PAGE - * - * _Rate_monotonic_Is_inactive - * - */ - -#define _Rate_monotonic_Is_inactive( _the_period ) \ - ((_the_period)->state == RATE_MONOTONIC_INACTIVE) - -/*PAGE - * - * _Rate_monotonic_Is_expired - * - */ - -#define _Rate_monotonic_Is_expired( _the_period ) \ - ((_the_period)->state == RATE_MONOTONIC_EXPIRED) - -/*PAGE - * - * _Rate_monotonic_Is_null - * - */ - -#define _Rate_monotonic_Is_null( _the_period ) ( (_the_period) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/region.inl b/cpukit/rtems/macros/rtems/rtems/region.inl deleted file mode 100644 index 667d77e307..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/region.inl +++ /dev/null @@ -1,75 +0,0 @@ -/* region.inl - * - * This file contains the macro implementation of the inlined - * routines from the Region Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __REGION_inl -#define __REGION_inl - -/*PAGE - * - * _Region_Allocate - * - */ - -#define _Region_Allocate() \ - (Region_Control *) _Objects_Allocate( &_Region_Information ) - -/*PAGE - * - * _Region_Free - * - */ - -#define _Region_Free( _the_region ) \ - _Objects_Free( &_Region_Information, &(_the_region)->Object ) - -/*PAGE - * - * _Region_Get - * - */ - -#define _Region_Get( _id, _location ) \ - (Region_Control *) \ - _Objects_Get( &_Region_Information, (_id), (_location) ) - -/*PAGE - * - * _Region_Allocate_segment - * - */ - -#define _Region_Allocate_segment( _the_region, _size ) \ - _Heap_Allocate( &(_the_region)->Memory, (_size) ) - -/*PAGE - * - * _Region_Free_segment - * - */ - -#define _Region_Free_segment( _the_region, _the_segment ) \ - _Heap_Free( &(_the_region)->Memory, (_the_segment) ) - -/*PAGE - * - * _Region_Is_null - * - */ - -#define _Region_Is_null( _the_region ) ( (_the_region) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/sem.inl b/cpukit/rtems/macros/rtems/rtems/sem.inl deleted file mode 100644 index 7e94069009..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/sem.inl +++ /dev/null @@ -1,58 +0,0 @@ -/* sem.inl - * - * This file contains the macro implementation of the inlined - * routines from the Semaphore Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __SEMAPHORE_inl -#define __SEMAPHORE_inl - -/*PAGE - * - * _Semaphore_Allocate - * - */ - -#define _Semaphore_Allocate() \ - (Semaphore_Control *) _Objects_Allocate( &_Semaphore_Information ) - -/*PAGE - * - * _Semaphore_Free - * - */ - -#define _Semaphore_Free( _the_semaphore ) \ - _Objects_Free( &_Semaphore_Information, &(_the_semaphore)->Object ) - -/*PAGE - * - * _Semaphore_Get - * - */ - -#define _Semaphore_Get( _id, _location ) \ - (Semaphore_Control *) \ - _Objects_Get( &_Semaphore_Information, (_id), (_location) ) - -/*PAGE - * - * _Semaphore_Is_null - * - */ - -#define _Semaphore_Is_null( _the_semaphore ) \ - ( (_the_semaphore) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/status.inl b/cpukit/rtems/macros/rtems/rtems/status.inl deleted file mode 100644 index c4f8a523df..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/status.inl +++ /dev/null @@ -1,47 +0,0 @@ -/* macros/status.h - * - * This include file contains the implementations of the inlined - * routines for the status package. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __MACROS_STATUS_h -#define __MACROS_STATUS_h - -/*PAGE - * - * rtems_is_status_successful - * - */ - -#define rtems_is_status_successful( _code ) \ - ( (_code) == RTEMS_SUCCESSFUL ) - -/*PAGE - * - * rtems_are_statuses_equal - * - */ - -#define rtems_are_statuses_equal( _code1, _code2 ) \ - ((_code1) == (_code2)) - -/* - * _Status_Is_proxy_blocking - * - */ - -#define _Status_Is_proxy_blocking( _code ) \ - ( (_code) == RTEMS_PROXY_BLOCKING ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/tasks.inl b/cpukit/rtems/macros/rtems/rtems/tasks.inl deleted file mode 100644 index 7b40cbf7fd..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/tasks.inl +++ /dev/null @@ -1,82 +0,0 @@ -/* tasks.inl - * - * This file contains the macro implementation of all inlined - * routines in the with RTEMS Tasks Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __RTEMS_TASKS_inl -#define __RTEMS_TASKS_inl - -/*PAGE - * - * _RTEMS_tasks_Allocate - * - */ - -#define _RTEMS_tasks_Allocate() \ - (Thread_Control *) _Objects_Allocate( &_Thread_Information ) - -/*PAGE - * - * _RTEMS_tasks_Free - * - */ - -#define _RTEMS_tasks_Free( _the_task ) \ - _Objects_Free( &_Thread_Information, &(_the_task)->Object ) - -/*PAGE - * - * _RTEMS_tasks_Cancel_wait - * - */ - -#define _RTEMS_tasks_Cancel_wait( _the_thread ) \ - { \ - States_Control _state; \ - States_Control _remote_state; \ - \ - _state = (_the_thread)->current_state; \ - \ - if ( _States_Is_waiting_on_thread_queue( _state ) ) { \ - if ( _States_Is_waiting_for_rpc_reply( _state ) && \ - _States_Is_locally_blocked( _state ) ) { \ - _remote_state = _States_Clear( \ - STATES_WAITING_FOR_RPC_REPLY + STATES_TRANSIENT, \ - _state \ - ); \ - \ - switch ( _remote_state ) { \ - \ - case STATES_WAITING_FOR_BUFFER: \ - _Partition_MP_Send_extract_proxy( (_the_thread) ); \ - break; \ - case STATES_WAITING_FOR_SEGMENT: \ - _Region_MP_Send_extract_proxy( (_the_thread) ); \ - break; \ - case STATES_WAITING_FOR_SEMAPHORE: \ - _Semaphore_MP_Send_extract_proxy( (_the_thread) ); \ - break; \ - case STATES_WAITING_FOR_MESSAGE: \ - _Message_queue_MP_Send_extract_proxy( (_the_thread) ); \ - break; \ - } \ - } \ - _Thread_queue_Extract( (_the_thread)->Wait.queue, (_the_thread) ); \ - } \ - else if ( _Watchdog_Is_active( &(_the_thread)->Timer ) ) \ - (void) _Watchdog_Remove( &(_the_thread)->Timer ); \ - } - -#endif -/* end of include file */ diff --git a/cpukit/rtems/macros/rtems/rtems/timer.inl b/cpukit/rtems/macros/rtems/rtems/timer.inl deleted file mode 100644 index 9026bed570..0000000000 --- a/cpukit/rtems/macros/rtems/rtems/timer.inl +++ /dev/null @@ -1,85 +0,0 @@ -/* timer.inl - * - * This file contains the macro implementation of the inlined routines - * from the Timer Manager. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __TIMER_inl -#define __TIMER_inl - -/*PAGE - * - * _Timer_Allocate - * - */ - -#define _Timer_Allocate() \ - (Timer_Control *) _Objects_Allocate( &_Timer_Information ) - -/*PAGE - * - * _Timer_Free - * - */ - -#define _Timer_Free( _the_timer ) \ - _Objects_Free( &_Timer_Information, &(_the_timer)->Object ) - -/*PAGE - * - * _Timer_Get - * - */ - -#define _Timer_Get( _id, _location ) \ - (Timer_Control *) \ - _Objects_Get( &_Timer_Information, (_id), (_location) ) - -/*PAGE - * - * _Timer_Is_interval_class - * - */ - -#define _Timer_Is_interval_class( _the_class ) \ - ( (_the_class) == TIMER_INTERVAL ) - -/*PAGE - * - * _Timer_Is_time_of_day_class - * - */ - -#define _Timer_Is_time_of_day_class( _the_class ) \ - ( (_the_class) == TIMER_TIME_OF_DAY ) - -/*PAGE - * - * _Timer_Is_dormant_class - * - */ - -#define _Timer_Is_dormant_class( _the_class ) \ - ( (_the_class) == TIMER_DORMANT ) - -/*PAGE - * - * _Timer_Is_null - * - */ - -#define _Timer_Is_null( _the_timer ) \ - ( (_the_timer) == NULL ) - -#endif -/* end of include file */ diff --git a/cpukit/rtems/src/dpmem.c b/cpukit/rtems/src/dpmem.c deleted file mode 100644 index 0aacecec5b..0000000000 --- a/cpukit/rtems/src/dpmem.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Dual Port Memory Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/address.h> -#include <rtems/dpmem.h> -#include <rtems/object.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Dual_ported_memory_Manager_initialization - * - * This routine initializes all dual-ported memory manager related - * data structures. - * - * Input parameters: - * maximum_ports - number of ports to initialize - * - * Output parameters: NONE - */ - -void _Dual_ported_memory_Manager_initialization( - unsigned32 maximum_ports -) -{ - _Objects_Initialize_information( - &_Dual_ported_memory_Information, - FALSE, - maximum_ports, - sizeof( Dual_ported_memory_Control ) - ); -} - -/*PAGE - * - * rtems_port_create - * - * This directive creates a port into a dual-ported memory area. - * - * Input parameters: - * name - user defined port name - * internal_start - internal start address of port - * external_start - external start address of port - * length - physical length in bytes - * id - address of port id to set - * - * Output parameters: - * id - port id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_port_create( - Objects_Name name, - void *internal_start, - void *external_start, - unsigned32 length, - Objects_Id *id -) -{ - register Dual_ported_memory_Control *the_port; - - if ( !_Objects_Is_name_valid( name) ) - return ( RTEMS_INVALID_NAME ); - - if ( !_Addresses_Is_aligned( internal_start ) || - !_Addresses_Is_aligned( external_start ) ) - return( RTEMS_INVALID_ADDRESS ); - - _Thread_Disable_dispatch(); /* to prevent deletion */ - - the_port = _Dual_ported_memory_Allocate(); - - if ( !the_port ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_port->internal_base = internal_start; - the_port->external_base = external_start; - the_port->length = length - 1; - - _Objects_Open( &_Dual_ported_memory_Information, - &the_port->Object, name ); - *id = the_port->Object.id; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_port_ident - * - * This directive returns the system ID associated with - * the port name. - * - * Input parameters: - * name - user defined port name - * id - pointer to port id - * - * Output parameters: - * *id - port id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_port_ident( - Objects_Name name, - Objects_Id *id -) -{ - return( - _Objects_Name_to_id( - &_Dual_ported_memory_Information, - name, - RTEMS_SEARCH_ALL_NODES, - id - ) - ); -} - -/*PAGE - * - * rtems_port_delete - * - * This directive allows a thread to delete a dual-ported memory area - * specified by the dual-ported memory identifier. - * - * Input parameters: - * id - dual-ported memory area id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_port_delete( - Objects_Id id -) -{ - register Dual_ported_memory_Control *the_port; - Objects_Locations location; - - the_port = _Dual_ported_memory_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - _Objects_Close( &_Dual_ported_memory_Information, &the_port->Object ); - _Dual_ported_memory_Free( the_port ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_port_internal_to_external - * - * This directive converts an internal dual-ported memory address to an - * external dual-ported memory address. If the given internal address - * is an invalid dual-ported address, then the external address is set - * to the given internal address. - * - * Input parameters: - * id - id of dual-ported memory object - * internal - internal address to set - * external - pointer to external address - * - * Output parameters: - * external - external address - * RTEMS_SUCCESSFUL - always succeeds - */ - -rtems_status_code rtems_port_internal_to_external( - Objects_Id id, - void *internal, - void **external -) -{ - register Dual_ported_memory_Control *the_port; - Objects_Locations location; - unsigned32 ending; - - the_port = _Dual_ported_memory_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - ending = _Addresses_Subtract( internal, the_port->internal_base ); - if ( ending > the_port->length ) - *external = internal; - else - *external = _Addresses_Add_offset( the_port->external_base, - ending ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_port_external_to_internal - * - * This directive converts an external dual-ported memory address to an - * internal dual-ported memory address. If the given external address - * is an invalid dual-ported address, then the internal address is set - * to the given external address. - * - * Input parameters: - * id - id of dp memory object - * external - external address - * internal - pointer of internal address to set - * - * Output parameters: - * internal - internal address - * RTEMS_SUCCESSFUL - always succeeds - */ - -rtems_status_code rtems_port_external_to_internal( - Objects_Id id, - void *external, - void **internal -) -{ - register Dual_ported_memory_Control *the_port; - Objects_Locations location; - unsigned32 ending; - - the_port = _Dual_ported_memory_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - ending = _Addresses_Subtract( external, the_port->external_base ); - if ( ending > the_port->length ) - *internal = external; - else - *internal = _Addresses_Add_offset( the_port->internal_base, - ending ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/event.c b/cpukit/rtems/src/event.c deleted file mode 100644 index 6a25ae81c3..0000000000 --- a/cpukit/rtems/src/event.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Event Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/event.h> -#include <rtems/isr.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/states.h> -#include <rtems/thread.h> - -/*PAGE - * - * rtems_event_send - * - * This directive allows a thread send an event set to another thread. - * - * Input parameters: - * id - thread id - * event - event set - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_event_send( - Objects_Id id, - rtems_event_set event_in -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return( - _Event_MP_Send_request_packet( - EVENT_MP_SEND_REQUEST, - id, - event_in - ) - ); - case OBJECTS_LOCAL: - _Event_sets_Post( event_in, &the_thread->pending_events ); - _Event_Surrender( the_thread ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_event_receive - * - * This directive allows a thread to receive a set of events. - * - * Input parameters: - * event_in - input event condition - * option_set - options - * ticks - number of ticks to wait (0 means wait forever) - * event_out - pointer to output event set - * - * Output parameters: - * event out - event set - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_event_receive( - rtems_event_set event_in, - rtems_option option_set, - rtems_interval ticks, - rtems_event_set *event_out -) -{ - if ( _Event_sets_Is_empty( event_in ) ) { - *event_out = _Thread_Executing->pending_events; - return( RTEMS_SUCCESSFUL ); - } - - _Thread_Disable_dispatch(); - _Event_Seize( event_in, option_set, ticks ); - _Thread_Enable_dispatch(); - *event_out = _Thread_Executing->events_out; - return( _Thread_Executing->Wait.return_code ); -} - -/*PAGE - * - * _Event_Seize - * - * This routine attempts to satisfy the requested event condition - * for the running thread. - * - * Input parameters: - * event_in - the event condition to satisfy - * option_set - acquire event options - * ticks - interval to wait - * - * Output parameters: NONE - * - * INTERRUPT LATENCY: - * available - * wait - * check sync - */ - -void _Event_Seize( - rtems_event_set event_in, - rtems_option option_set, - rtems_interval ticks -) -{ - Thread_Control *executing; - rtems_event_set seized_events; - rtems_event_set pending_events; - ISR_Level level; - - executing = _Thread_Executing; - executing->Wait.return_code = RTEMS_SUCCESSFUL; - - _ISR_Disable( level ); - pending_events = executing->pending_events; - seized_events = _Event_sets_Get( pending_events, event_in ); - - if ( !_Event_sets_Is_empty( seized_events ) && - (seized_events == event_in || _Options_Is_any( option_set )) ) { - executing->pending_events = - _Event_sets_Clear( pending_events, seized_events ); - _ISR_Enable( level ); - executing->events_out = seized_events; - return; - } - - if ( _Options_Is_no_wait( option_set ) ) { - _ISR_Enable( level ); - executing->Wait.return_code = RTEMS_UNSATISFIED; - executing->events_out = seized_events; - return; - } - - _Event_Sync = TRUE; - executing->Wait.option_set = option_set; - executing->Wait.Extra.event_condition = event_in; - - _ISR_Enable( level ); - _Thread_Set_state( executing, STATES_WAITING_FOR_EVENT ); - - if ( ticks ) { - _Watchdog_Initialize( - &executing->Timer, - _Event_Timeout, - executing->Object.id, - NULL - ); - _Watchdog_Insert_ticks( - &executing->Timer, - ticks, - WATCHDOG_NO_ACTIVATE - ); - } - - _ISR_Disable( level ); - if ( _Event_Sync == TRUE ) { - _Event_Sync = FALSE; - if ( ticks ) - _Watchdog_Activate( &executing->Timer ); - _ISR_Enable( level ); - return; - } - _ISR_Enable( level ); - (void) _Watchdog_Remove( &executing->Timer ); - _Thread_Unblock( executing ); - return; -} - -/*PAGE - * - * _Event_Surrender - * - * This routines remove a thread from the specified threadq. - * - * Input parameters: - * the_thread - pointer to thread to be dequeued - * - * Output parameters: NONE - * - * INTERRUPT LATENCY: - * before flash - * after flash - * check sync - */ - -void _Event_Surrender( - Thread_Control *the_thread -) -{ - ISR_Level level; - rtems_event_set pending_events; - rtems_event_set event_condition; - rtems_event_set seized_events; - - _ISR_Disable( level ); - pending_events = the_thread->pending_events; - event_condition = the_thread->Wait.Extra.event_condition; - - seized_events = _Event_sets_Get( pending_events, event_condition ); - - if ( !_Event_sets_Is_empty( seized_events ) ) { - if ( _States_Is_waiting_for_event( the_thread->current_state ) ) { - if ( seized_events == event_condition || - _Options_Is_any( the_thread->Wait.option_set ) ) { - the_thread->pending_events = - _Event_sets_Clear( pending_events, seized_events ); - (rtems_event_set *)the_thread->events_out = seized_events; - - _ISR_Flash( level ); - - if ( !_Watchdog_Is_active( &the_thread->Timer ) ) { - _ISR_Enable( level ); - _Thread_Unblock( the_thread ); - } - else { - _Watchdog_Deactivate( &the_thread->Timer ); - _ISR_Enable( level ); - (void) _Watchdog_Remove( &the_thread->Timer ); - _Thread_Unblock( the_thread ); - } - return; - } - } - else if ( _Thread_Is_executing( the_thread ) && _Event_Sync == TRUE ) { - if ( seized_events == event_condition || - _Options_Is_any( the_thread->Wait.option_set ) ) { - the_thread->pending_events = - _Event_sets_Clear( pending_events,seized_events ); - (rtems_event_set *)the_thread->events_out = seized_events; - _Event_Sync = FALSE; - } - } - } - _ISR_Enable( level ); -} - -/*PAGE - * - * _Event_Timeout - * - * This routine processes a thread which timeouts while waiting to - * receive an event_set. It is called by the watchdog handler. - * - * Input parameters: - * id - thread id - * - * Output parameters: NONE - */ - -void _Event_Timeout( - Objects_Id id, - void *ignored -) -{ - Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - case OBJECTS_REMOTE: /* impossible */ - break; - case OBJECTS_LOCAL: - the_thread->Wait.return_code = RTEMS_TIMEOUT; - _Thread_Unblock( the_thread ); - _Thread_Unnest_dispatch(); - break; - } -} diff --git a/cpukit/rtems/src/eventmp.c b/cpukit/rtems/src/eventmp.c deleted file mode 100644 index 4bc5925c2a..0000000000 --- a/cpukit/rtems/src/eventmp.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Multiprocessing Support for the Event Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/event.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/states.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Event_MP_Send_process_packet - * - * This subprogram is not needed since there are no process - * packets to be sent by this manager. - * - */ - -/*PAGE - * - * _Event_MP_Send_request_packet - * - */ - -rtems_status_code _Event_MP_Send_request_packet ( - Event_MP_Remote_operations operation, - Objects_Id event_id, - rtems_event_set event_in -) -{ - Event_MP_Packet *the_packet; - - switch ( operation ) { - - case EVENT_MP_SEND_REQUEST: - - the_packet = _Event_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_EVENT; - the_packet->Prefix.length = sizeof ( Event_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Event_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = event_id; - the_packet->event_in = event_in; - - return - _MPCI_Send_request_packet( - rtems_get_node( event_id ), - &the_packet->Prefix, - STATES_READY - ); - - break; - - case EVENT_MP_SEND_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_SUCCESSFUL; -} - -/*PAGE - * - * _Event_MP_Send_response_packet - * - */ - -void _Event_MP_Send_response_packet ( - Event_MP_Remote_operations operation, - Thread_Control *the_thread -) -{ - Event_MP_Packet *the_packet; - - switch ( operation ) { - - case EVENT_MP_SEND_RESPONSE: - - the_packet = ( Event_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case EVENT_MP_SEND_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Event_MP_Process_packet - * - */ - -void _Event_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Event_MP_Packet *the_packet; - Thread_Control *the_thread; - - the_packet = (Event_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case EVENT_MP_SEND_REQUEST: - - the_packet->Prefix.return_code = rtems_event_send( - the_packet->Prefix.id, - the_packet->event_in - ); - - _Event_MP_Send_response_packet( - EVENT_MP_SEND_RESPONSE, - _Thread_Executing - ); - break; - - case EVENT_MP_SEND_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - - break; - - } -} - -/*PAGE - * - * _Event_MP_Send_object_was_deleted - * - * This subprogram is not needed since there are no objects - * deleted by this manager. - * - */ - -/*PAGE - * - * _Event_MP_Send_extract_proxy - * - * This subprogram is not needed since there are no objects - * deleted by this manager. - * - */ - -/*PAGE - * - * _Event_MP_Get_packet - * - */ - -Event_MP_Packet *_Event_MP_Get_packet ( void ) -{ - return ( (Event_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/intr.c b/cpukit/rtems/src/intr.c deleted file mode 100644 index 25f5176967..0000000000 --- a/cpukit/rtems/src/intr.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Interrupt Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/isr.h> -#include <rtems/stack.h> -#include <rtems/intr.h> -#include <rtems/wkspace.h> - -/* _Interrupt_Manager_initialization - * - * This routine initializes the interrupt manager. - * - * Input parameters: NONE - * - * Output parameters: NONE - */ - -void _Interrupt_Manager_initialization( void ) -{ -#if ( CPU_ALLOCATE_INTERRUPT_STACK == TRUE ) - - if ( _CPU_Table.interrupt_stack_size < RTEMS_MINIMUM_STACK_SIZE ) - rtems_fatal_error_occurred( RTEMS_INVALID_SIZE ); - - _CPU_Interrupt_stack_low = - _Workspace_Allocate_or_fatal_error( _CPU_Table.interrupt_stack_size ); - - _CPU_Interrupt_stack_high = _Addresses_Add_offset( - _CPU_Interrupt_stack_low, - _CPU_Table.interrupt_stack_size - ); - -#endif - -#if ( CPU_HAS_HARDWARE_INTERRUPT_STACK == TRUE ) - _CPU_Install_interrupt_stack(); -#endif - -} - -/* rtems_interrupt_catch - * - * This directive allows a thread to specify what action to take when - * catching signals. - * - * Input parameters: - * new_isr_handler - address of interrupt service routine (isr) - * vector - interrupt vector number - * old_isr_handler - address at which to store previous ISR address - * - * Output parameters: - * RTEMS_SUCCESSFUL - always succeeds - * *old_isr_handler - previous ISR address - */ - -rtems_status_code rtems_interrupt_catch( - rtems_isr_entry new_isr_handler, - rtems_vector_number vector, - rtems_isr_entry *old_isr_handler -) -{ - if ( !_ISR_Is_vector_number_valid( vector ) ) - return( RTEMS_INVALID_NUMBER ); - - if ( !_ISR_Is_valid_user_handler( new_isr_handler ) ) - return( RTEMS_INVALID_ADDRESS ); - - _ISR_Install_vector( - vector, (proc_ptr)new_isr_handler, (proc_ptr *)old_isr_handler ); - - return( RTEMS_SUCCESSFUL ); -} diff --git a/cpukit/rtems/src/mp.c b/cpukit/rtems/src/mp.c deleted file mode 100644 index f9522b2296..0000000000 --- a/cpukit/rtems/src/mp.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Multiprocessing Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/config.h> -#include <rtems/cpu.h> -#include <rtems/event.h> -#include <rtems/fatal.h> -#include <rtems/intthrd.h> -#include <rtems/message.h> -#include <rtems/mp.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/part.h> -#include <rtems/sem.h> -#include <rtems/signal.h> -#include <rtems/states.h> -#include <rtems/tasks.h> -#include <rtems/thread.h> -#include <rtems/threadq.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _Multiprocessing_Manager_initialization - * - */ - -void _Multiprocessing_Manager_initialization ( void ) -{ - if ( _Configuration_MP_table->node < 1 || - _Configuration_MP_table->node > _Configuration_MP_table->maximum_nodes ) - rtems_fatal_error_occurred( RTEMS_INVALID_NODE ); - - _Internal_threads_Set_MP_receive_server( _Multiprocessing_Receive_server ); -} - -/*PAGE - * - * rtems_multiprocessing_announce - * - */ - -void rtems_multiprocessing_announce ( void ) -{ - _Thread_MP_Ready(); -} - -/*PAGE - * - * _Multiprocessing_Receive_server - * - */ - -Thread _Multiprocessing_Receive_server ( - Thread_Argument ignored -) -{ - - rtems_packet_prefix *the_packet; - - _Thread_Dispatch_disable_level = 1; - - for ( ; ; ) { - - _Internal_threads_System_initialization_thread->Notepads[ 0 ] = 1; - - the_packet = _MPCI_Receive_packet(); - - if ( ! the_packet ) { - _Thread_MP_Block(); - _Thread_Dispatch_disable_level = 1; - } - else { - - _Thread_Executing->receive_packet = the_packet; - - switch ( the_packet->the_class ) { - - case RTEMS_MP_PACKET_INTERNAL_THREADS: - _Internal_threads_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_TASKS: - _RTEMS_tasks_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_MESSAGE_QUEUE: - _Message_queue_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_SEMAPHORE: - _Semaphore_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_PARTITION: - _Partition_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_REGION: - /* Global regions are unsupported at this time */ - break; - - case RTEMS_MP_PACKET_EVENT: - _Event_MP_Process_packet( the_packet ); - break; - - case RTEMS_MP_PACKET_SIGNAL: - _Signal_MP_Process_packet( the_packet ); - break; - } - } - } -} - -/* end of file */ diff --git a/cpukit/rtems/src/msg.c b/cpukit/rtems/src/msg.c deleted file mode 100644 index 7cfe683ce5..0000000000 --- a/cpukit/rtems/src/msg.c +++ /dev/null @@ -1,708 +0,0 @@ -/* - * Message Queue Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/attr.h> -#include <rtems/chain.h> -#include <rtems/config.h> -#include <rtems/isr.h> -#include <rtems/message.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/states.h> -#include <rtems/thread.h> -#include <rtems/wkspace.h> -#include <rtems/mpci.h> - -/*PAGE - * - * _Message_queue_Manager_initialization - * - * This routine initializes all message queue manager related - * data structures. - * - * Input parameters: - * maximum_message_queues - number of message queues to initialize - * maximum_message - number of messages per queue - * - * Output parameters: NONE - */ - -void _Message_queue_Manager_initialization( - unsigned32 maximum_message_queues, - unsigned32 maximum_messages -) -{ - - _Objects_Initialize_information( - &_Message_queue_Information, - TRUE, - maximum_message_queues, - sizeof( Message_queue_Control ) - ); - - if ( maximum_messages == 0 ) { - - _Chain_Initialize_empty( &_Message_queue_Inactive_messages ); - - } else { - - - _Chain_Initialize( - &_Message_queue_Inactive_messages, - _Workspace_Allocate_or_fatal_error( - maximum_messages * sizeof( Message_queue_Buffer_control ) - ), - maximum_messages, - sizeof( Message_queue_Buffer_control ) - ); - - } -} - -/*PAGE - * - * rtems_message_queue_create - * - * This directive creates a message queue by allocating and initializing - * a message queue data structure. - * - * Input parameters: - * name - user defined queue name - * count - maximum message and reserved buffer count - * attribute_set - process method - * id - pointer to queue - * - * Output parameters: - * id - queue id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_create( - Objects_Name name, - unsigned32 count, - rtems_attribute attribute_set, - Objects_Id *id -) -{ - register Message_queue_Control *the_message_queue; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - - if ( _Attributes_Is_global( attribute_set ) && - !_Configuration_Is_multiprocessing() ) - return( RTEMS_MP_NOT_CONFIGURED ); - - _Thread_Disable_dispatch(); /* protects object pointer */ - - the_message_queue = _Message_queue_Allocate(); - - if ( !the_message_queue ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - if ( _Attributes_Is_global( attribute_set ) && - !( _Objects_MP_Open( &_Message_queue_Information, name, - the_message_queue->Object.id, FALSE ) ) ) { - _Message_queue_Free( the_message_queue ); - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - if ( _Attributes_Is_limit( attribute_set ) ) - the_message_queue->maximum_pending_messages = count; - else - the_message_queue->maximum_pending_messages = 0xffffffff; - - the_message_queue->attribute_set = attribute_set; - the_message_queue->number_of_pending_messages = 0; - - _Chain_Initialize_empty( &the_message_queue->Pending_messages ); - - _Thread_queue_Initialize( &the_message_queue->Wait_queue, attribute_set, - STATES_WAITING_FOR_MESSAGE ); - - _Objects_Open( &_Message_queue_Information, - &the_message_queue->Object, name ); - - *id = the_message_queue->Object.id; - - if ( _Attributes_Is_global( attribute_set ) ) - _Message_queue_MP_Send_process_packet( - MESSAGE_QUEUE_MP_ANNOUNCE_CREATE, - the_message_queue->Object.id, - name, - 0 - ); - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_message_queue_ident - * - * This directive returns the system ID associated with - * the message queue name. - * - * Input parameters: - * name - user defined message queue name - * node - node(s) to be searched - * id - pointer to message queue id - * - * Output parameters: - * *id - message queue id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -) -{ - return( _Objects_Name_to_id( &_Message_queue_Information, name, - node, id ) ); -} - -/*PAGE - * - * rtems_message_queue_delete - * - * This directive allows a thread to delete the message queue specified - * by the given queue identifier. - * - * Input parameters: - * id - queue id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_delete( - Objects_Id id -) -{ - register Message_queue_Control *the_message_queue; - Objects_Locations location; - - the_message_queue = _Message_queue_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - _Objects_Close( &_Message_queue_Information, - &the_message_queue->Object ); - - if ( the_message_queue->number_of_pending_messages != 0 ) - (void) _Message_queue_Flush_support( the_message_queue ); - else - _Thread_queue_Flush( - &the_message_queue->Wait_queue, - _Message_queue_MP_Send_object_was_deleted - ); - - _Message_queue_Free( the_message_queue ); - - if ( _Attributes_Is_global( the_message_queue->attribute_set ) ) { - _Objects_MP_Close( - &_Message_queue_Information, - the_message_queue->Object.id - ); - - _Message_queue_MP_Send_process_packet( - MESSAGE_QUEUE_MP_ANNOUNCE_DELETE, - the_message_queue->Object.id, - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ); - } - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_message_queue_send - * - * This routine implements the directives q_send. It sends a - * message to the specified message queue. - * - * Input parameters: - * id - pointer to message queue - * buffer - pointer to message buffer - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_send( - Objects_Id id, - void *buffer -) -{ - return( _Message_queue_Submit( - id, - (Message_queue_Buffer *) buffer, - MESSAGE_QUEUE_SEND_REQUEST - ) - ); -} - -/*PAGE - * - * rtems_message_queue_urgent - * - * This routine implements the directives q_urgent. It urgents a - * message to the specified message queue. - * - * Input parameters: - * id - pointer to message queue - * buffer - pointer to message buffer - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_urgent( - Objects_Id id, - void *buffer -) -{ - return( _Message_queue_Submit( - id, - (Message_queue_Buffer *) buffer, - MESSAGE_QUEUE_URGENT_REQUEST - ) - ); -} - -/*PAGE - * - * rtems_message_queue_broadcast - * - * This directive sends a message for every thread waiting on the queue - * designated by id. - * - * Input parameters: - * id - pointer to message queue - * buffer - pointer to message buffer - * count - pointer to area to store number of threads made ready - * - * Output parameters: - * count - number of threads made ready - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_broadcast( - Objects_Id id, - void *buffer, - unsigned32 *count -) -{ - register Message_queue_Control *the_message_queue; - Objects_Locations location; - Thread_Control *the_thread; - unsigned32 number_broadcasted; - - the_message_queue = _Message_queue_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = count; - - return - _Message_queue_MP_Send_request_packet( - MESSAGE_QUEUE_MP_BROADCAST_REQUEST, - id, - (Message_queue_Buffer *) buffer, - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ); - - case OBJECTS_LOCAL: - number_broadcasted = 0; - while ( (the_thread = - _Thread_queue_Dequeue(&the_message_queue->Wait_queue)) ) { - number_broadcasted += 1; - _Message_queue_Copy_buffer( - (Message_queue_Buffer *) buffer, - the_thread->Wait.return_argument - ); - - if ( !_Objects_Is_local_id( the_thread->Object.id ) ) { - the_thread->receive_packet->return_code = RTEMS_SUCCESSFUL; - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_RECEIVE_RESPONSE, - id, - the_thread - ); - } - } - _Thread_Enable_dispatch(); - *count = number_broadcasted; - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_message_queue_receive - * - * This directive dequeues a message from the designated message queue - * and copies it into the requesting thread's buffer. - * - * Input parameters: - * id - queue id - * buffer - pointer to message buffer - * option_set - options on receive - * timeout - number of ticks to wait - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_receive( - Objects_Id id, - void *buffer, - unsigned32 option_set, - rtems_interval timeout -) -{ - register Message_queue_Control *the_message_queue; - Objects_Locations location; - - the_message_queue = _Message_queue_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = buffer; - return - _Message_queue_MP_Send_request_packet( - MESSAGE_QUEUE_MP_RECEIVE_REQUEST, - id, - buffer, - option_set, - timeout - ); - - case OBJECTS_LOCAL: - if ( !_Message_queue_Seize( the_message_queue, option_set, buffer ) ) - _Thread_queue_Enqueue( &the_message_queue->Wait_queue, timeout ); - _Thread_Enable_dispatch(); - return( _Thread_Executing->Wait.return_code ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_message_queue_flush - * - * This directive removes all pending messages from a queue and returns - * the number of messages removed. If no messages were present then - * a count of zero is returned. - * - * Input parameters: - * id - queue id - * count - return area for count - * - * Output parameters: - * count - number of messages removed ( 0 = empty queue ) - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_message_queue_flush( - Objects_Id id, - unsigned32 *count -) -{ - register Message_queue_Control *the_message_queue; - Objects_Locations location; - - the_message_queue = _Message_queue_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = count; - - return - _Message_queue_MP_Send_request_packet( - MESSAGE_QUEUE_MP_FLUSH_REQUEST, - id, - 0, /* Not used */ - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ); - - case OBJECTS_LOCAL: - if ( the_message_queue->number_of_pending_messages != 0 ) - *count = _Message_queue_Flush_support( the_message_queue ); - else - *count = 0; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * _Message_queue_Seize - * - * This kernel routine dequeues a message, copies the message buffer to - * a given destination buffer, and frees the message buffer to the - * inactive message pool. - * - * Input parameters: - * the_message_queue - pointer to message queue - * option_set - options on receive - * the_buffer - pointer to message buffer to be filled - * - * Output parameters: - * TRUE - if message received or RTEMS_NO_WAIT and no message - * FALSE - if thread is to block - * - * NOTE: Dependent on BUFFER_LENGTH - * - * INTERRUPT LATENCY: - * available - * wait - */ - -boolean _Message_queue_Seize( - Message_queue_Control *the_message_queue, - rtems_option option_set, - Message_queue_Buffer *buffer -) -{ - ISR_Level level; - Message_queue_Buffer_control *the_message; - Thread_Control *executing; - - executing = _Thread_Executing; - executing->Wait.return_code = RTEMS_SUCCESSFUL; - _ISR_Disable( level ); - if ( the_message_queue->number_of_pending_messages != 0 ) { - the_message_queue->number_of_pending_messages -= 1; - - the_message = _Message_queue_Get_pending_message( the_message_queue ); - _ISR_Enable( level ); - _Message_queue_Copy_buffer( &the_message->Contents, buffer ); - _Message_queue_Free_message_buffer( the_message ); - return( TRUE ); - } - - if ( _Options_Is_no_wait( option_set ) ) { - _ISR_Enable( level ); - executing->Wait.return_code = RTEMS_UNSATISFIED; - return( TRUE ); - } - - the_message_queue->Wait_queue.sync = TRUE; - executing->Wait.queue = &the_message_queue->Wait_queue; - executing->Wait.id = the_message_queue->Object.id; - executing->Wait.option_set = option_set; - executing->Wait.return_argument = (unsigned32 *)buffer; - _ISR_Enable( level ); - return( FALSE ); -} - -/*PAGE - * - * _Message_queue_Flush_support - * - * This message manager routine removes all messages from a message queue - * and returns them to the inactive message pool. - * - * Input parameters: - * the_message_queue - pointer to message queue - * - * Output parameters: - * returns - number of messages placed on inactive chain - * - * INTERRUPT LATENCY: - * only case - */ - -unsigned32 _Message_queue_Flush_support( - Message_queue_Control *the_message_queue -) -{ - ISR_Level level; - Chain_Node *inactive_first; - Chain_Node *message_queue_first; - Chain_Node *message_queue_last; - unsigned32 count; - - _ISR_Disable( level ); - inactive_first = _Message_queue_Inactive_messages.first; - message_queue_first = the_message_queue->Pending_messages.first; - message_queue_last = the_message_queue->Pending_messages.last; - - _Message_queue_Inactive_messages.first = message_queue_first; - message_queue_last->next = inactive_first; - inactive_first->previous = message_queue_last; - message_queue_first->previous = - _Chain_Head( &_Message_queue_Inactive_messages ); - - _Chain_Initialize_empty( &the_message_queue->Pending_messages ); - - count = the_message_queue->number_of_pending_messages; - the_message_queue->number_of_pending_messages = 0; - _ISR_Enable( level ); - return( count ); -} - -/*PAGE - * - * _Message_queue_Submit - * - * This routine implements the directives q_send and q_urgent. It - * processes a message that is to be submitted to the designated - * message queue. The message will either be processed as a send - * send message which it will be inserted at the rear of the queue - * or it will be processed as an urgent message which will be inserted - * at the front of the queue. - * - * Input parameters: - * id - pointer to message queue - * the_buffer - pointer to message buffer - * submit_type - send or urgent message - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code _Message_queue_Submit( - Objects_Id id, - Message_queue_Buffer *buffer, - Message_queue_Submit_types submit_type -) -{ - register Message_queue_Control *the_message_queue; - Objects_Locations location; - Thread_Control *the_thread; - Message_queue_Buffer_control *the_message; - - the_message_queue = _Message_queue_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - switch ( submit_type ) { - case MESSAGE_QUEUE_SEND_REQUEST: - return - _Message_queue_MP_Send_request_packet( - MESSAGE_QUEUE_MP_SEND_REQUEST, - id, - buffer, - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ); - - case MESSAGE_QUEUE_URGENT_REQUEST: - return - _Message_queue_MP_Send_request_packet( - MESSAGE_QUEUE_MP_URGENT_REQUEST, - id, - buffer, - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ); - } - case OBJECTS_LOCAL: - the_thread = _Thread_queue_Dequeue( &the_message_queue->Wait_queue ); - - if ( the_thread ) { - - _Message_queue_Copy_buffer( - buffer, - the_thread->Wait.return_argument - ); - - if ( !_Objects_Is_local_id( the_thread->Object.id ) ) { - the_thread->receive_packet->return_code = RTEMS_SUCCESSFUL; - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_RECEIVE_RESPONSE, - id, - the_thread - ); - - } - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - if ( the_message_queue->number_of_pending_messages == - the_message_queue->maximum_pending_messages ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_message = _Message_queue_Allocate_message_buffer(); - - if ( !the_message ) { - _Thread_Enable_dispatch(); - return( RTEMS_UNSATISFIED ); - } - - _Message_queue_Copy_buffer( buffer, &the_message->Contents ); - - the_message_queue->number_of_pending_messages += 1; - - switch ( submit_type ) { - case MESSAGE_QUEUE_SEND_REQUEST: - _Message_queue_Append( the_message_queue, the_message ); - break; - case MESSAGE_QUEUE_URGENT_REQUEST: - _Message_queue_Prepend( the_message_queue, the_message ); - break; - } - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/msgmp.c b/cpukit/rtems/src/msgmp.c deleted file mode 100644 index d3a1a02f33..0000000000 --- a/cpukit/rtems/src/msgmp.c +++ /dev/null @@ -1,397 +0,0 @@ -/* - * Multiprocessing Support for the Message Queue Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/message.h> -#include <rtems/mpci.h> -#include <rtems/msgmp.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _Message_queue_MP_Send_process_packet - * - */ - -void _Message_queue_MP_Send_process_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Objects_Name name, - Objects_Id proxy_id -) -{ - Message_queue_MP_Packet *the_packet; - unsigned32 node; - - switch ( operation ) { - - case MESSAGE_QUEUE_MP_ANNOUNCE_CREATE: - case MESSAGE_QUEUE_MP_ANNOUNCE_DELETE: - case MESSAGE_QUEUE_MP_EXTRACT_PROXY: - - the_packet = _Message_queue_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_MESSAGE_QUEUE; - the_packet->Prefix.length = sizeof ( Message_queue_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Message_queue_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = message_queue_id; - the_packet->name = name; - the_packet->proxy_id = proxy_id; - - if ( operation == MESSAGE_QUEUE_MP_EXTRACT_PROXY ) - node = rtems_get_node( message_queue_id ); - else - node = MPCI_ALL_NODES; - - _MPCI_Send_process_packet( node, &the_packet->Prefix ); - break; - - case MESSAGE_QUEUE_MP_RECEIVE_REQUEST: - case MESSAGE_QUEUE_MP_RECEIVE_RESPONSE: - case MESSAGE_QUEUE_MP_SEND_REQUEST: - case MESSAGE_QUEUE_MP_SEND_RESPONSE: - case MESSAGE_QUEUE_MP_URGENT_REQUEST: - case MESSAGE_QUEUE_MP_URGENT_RESPONSE: - case MESSAGE_QUEUE_MP_BROADCAST_REQUEST: - case MESSAGE_QUEUE_MP_BROADCAST_RESPONSE: - case MESSAGE_QUEUE_MP_FLUSH_REQUEST: - case MESSAGE_QUEUE_MP_FLUSH_RESPONSE: - break; - - } -} - -/*PAGE - * - * _Message_queue_MP_Send_request_packet - * - */ - -rtems_status_code _Message_queue_MP_Send_request_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Message_queue_Buffer *buffer, - rtems_option option_set, - rtems_interval timeout -) -{ - Message_queue_MP_Packet *the_packet; - - switch ( operation ) { - - case MESSAGE_QUEUE_MP_RECEIVE_REQUEST: - case MESSAGE_QUEUE_MP_SEND_REQUEST: - case MESSAGE_QUEUE_MP_URGENT_REQUEST: - case MESSAGE_QUEUE_MP_BROADCAST_REQUEST: - case MESSAGE_QUEUE_MP_FLUSH_REQUEST: - - the_packet = _Message_queue_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_MESSAGE_QUEUE; - the_packet->Prefix.length = sizeof ( Message_queue_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Message_queue_MP_Packet ) - - sizeof ( Message_queue_Buffer ); - if ( ! _Options_Is_no_wait(option_set)) - the_packet->Prefix.timeout = timeout; - - the_packet->operation = operation; - the_packet->Prefix.id = message_queue_id; - the_packet->option_set = option_set; - - if ( buffer ) - _Message_queue_Copy_buffer( buffer, &the_packet->Buffer ); - - return - _MPCI_Send_request_packet( - rtems_get_node( message_queue_id ), - &the_packet->Prefix, - STATES_WAITING_FOR_MESSAGE - ); - break; - - case MESSAGE_QUEUE_MP_ANNOUNCE_CREATE: - case MESSAGE_QUEUE_MP_ANNOUNCE_DELETE: - case MESSAGE_QUEUE_MP_EXTRACT_PROXY: - case MESSAGE_QUEUE_MP_RECEIVE_RESPONSE: - case MESSAGE_QUEUE_MP_SEND_RESPONSE: - case MESSAGE_QUEUE_MP_URGENT_RESPONSE: - case MESSAGE_QUEUE_MP_BROADCAST_RESPONSE: - case MESSAGE_QUEUE_MP_FLUSH_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_SUCCESSFUL; -} - -/*PAGE - * - * _Message_queue_MP_Send_response_packet - * - */ - -void _Message_queue_MP_Send_response_packet ( - Message_queue_MP_Remote_operations operation, - Objects_Id message_queue_id, - Thread_Control *the_thread -) -{ - Message_queue_MP_Packet *the_packet; - - switch ( operation ) { - - case MESSAGE_QUEUE_MP_RECEIVE_RESPONSE: - case MESSAGE_QUEUE_MP_SEND_RESPONSE: - case MESSAGE_QUEUE_MP_URGENT_RESPONSE: - case MESSAGE_QUEUE_MP_BROADCAST_RESPONSE: - case MESSAGE_QUEUE_MP_FLUSH_RESPONSE: - - the_packet = ( Message_queue_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case MESSAGE_QUEUE_MP_ANNOUNCE_CREATE: - case MESSAGE_QUEUE_MP_ANNOUNCE_DELETE: - case MESSAGE_QUEUE_MP_EXTRACT_PROXY: - case MESSAGE_QUEUE_MP_RECEIVE_REQUEST: - case MESSAGE_QUEUE_MP_SEND_REQUEST: - case MESSAGE_QUEUE_MP_URGENT_REQUEST: - case MESSAGE_QUEUE_MP_BROADCAST_REQUEST: - case MESSAGE_QUEUE_MP_FLUSH_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Message_queue_MP_Process_packet - * - */ - -void _Message_queue_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Message_queue_MP_Packet *the_packet; - Thread_Control *the_thread; - boolean ignored; - - the_packet = (Message_queue_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case MESSAGE_QUEUE_MP_ANNOUNCE_CREATE: - - ignored = _Objects_MP_Open( - &_Message_queue_Information, - the_packet->name, - the_packet->Prefix.id, - TRUE - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_ANNOUNCE_DELETE: - - _Objects_MP_Close( &_Message_queue_Information, the_packet->Prefix.id ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_EXTRACT_PROXY: - - the_thread = _Thread_MP_Find_proxy( the_packet->proxy_id ); - - if ( ! _Thread_Is_null( the_thread ) ) - _Thread_queue_Extract( the_thread->Wait.queue, the_thread ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_RECEIVE_REQUEST: - - the_packet->Prefix.return_code = rtems_message_queue_receive( - the_packet->Prefix.id, - &the_packet->Buffer, - the_packet->option_set, - the_packet->Prefix.timeout - ); - - if ( ! _Status_Is_proxy_blocking( the_packet->Prefix.return_code ) ) - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_RECEIVE_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case MESSAGE_QUEUE_MP_RECEIVE_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _Message_queue_Copy_buffer( - &the_packet->Buffer, - (Message_queue_Buffer *) the_thread->Wait.return_argument - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_SEND_REQUEST: - - the_packet->Prefix.return_code = rtems_message_queue_send( - the_packet->Prefix.id, - &the_packet->Buffer - ); - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_SEND_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case MESSAGE_QUEUE_MP_SEND_RESPONSE: - case MESSAGE_QUEUE_MP_URGENT_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_URGENT_REQUEST: - - the_packet->Prefix.return_code = rtems_message_queue_urgent( - the_packet->Prefix.id, - &the_packet->Buffer - ); - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_URGENT_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case MESSAGE_QUEUE_MP_BROADCAST_REQUEST: - - the_packet->Prefix.return_code = rtems_message_queue_broadcast( - the_packet->Prefix.id, - &the_packet->Buffer, - &the_packet->count - ); - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_BROADCAST_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case MESSAGE_QUEUE_MP_BROADCAST_RESPONSE: - case MESSAGE_QUEUE_MP_FLUSH_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - *(unsigned32 *)the_thread->Wait.return_argument = the_packet->count; - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case MESSAGE_QUEUE_MP_FLUSH_REQUEST: - - the_packet->Prefix.return_code = rtems_message_queue_flush( - the_packet->Prefix.id, - &the_packet->count - ); - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_FLUSH_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - } -} - -/*PAGE - * - * _Message_queue_MP_Send_object_was_deleted - * - */ - -void _Message_queue_MP_Send_object_was_deleted ( - Thread_Control *the_proxy -) -{ - the_proxy->receive_packet->return_code = RTEMS_OBJECT_WAS_DELETED; - - _Message_queue_MP_Send_response_packet( - MESSAGE_QUEUE_MP_RECEIVE_RESPONSE, - the_proxy->Wait.id, - the_proxy - ); -} - -/*PAGE - * - * _Message_queue_MP_Send_extract_proxy - * - */ - -void _Message_queue_MP_Send_extract_proxy ( - Thread_Control *the_thread -) -{ - _Message_queue_MP_Send_process_packet( - MESSAGE_QUEUE_MP_EXTRACT_PROXY, - the_thread->Wait.id, - (Objects_Name) 0, - the_thread->Object.id - ); -} - -/*PAGE - * - * _Message_queue_MP_Get_packet - * - */ - -Message_queue_MP_Packet *_Message_queue_MP_Get_packet ( void ) -{ - return ( (Message_queue_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/part.c b/cpukit/rtems/src/part.c deleted file mode 100644 index 1fa2e0e716..0000000000 --- a/cpukit/rtems/src/part.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Partition Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/address.h> -#include <rtems/config.h> -#include <rtems/object.h> -#include <rtems/part.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Partition_Manager_initialization - * - * This routine initializes all partition manager related - * data structures. - * - * Input parameters: - * maximum_partitions - number of partitions to initialize - * - * Output parameters: NONE - */ - -void _Partition_Manager_initialization( - unsigned32 maximum_partitions -) -{ - _Objects_Initialize_information( - &_Partition_Information, - TRUE, - maximum_partitions, - sizeof( Partition_Control ) - ); - -} - -/*PAGE - * - * rtems_partition_create - * - * This directive creates a partiton of fixed sized buffers from the - * given contiguous memory area. - * - * Input parameters: - * name - user defined partition name - * starting_address - physical start address of partition - * length - physical length in bytes - * buffer_size - size of buffers in bytes - * attribute_set - partition attributes - * id - pointer to partition id - * - * Output parameters: - * id - partition id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_partition_create( - Objects_Name name, - void *starting_address, - unsigned32 length, - unsigned32 buffer_size, - rtems_attribute attribute_set, - Objects_Id *id -) -{ - register Partition_Control *the_partition; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - - if ( length == 0 || buffer_size == 0 || length < buffer_size || - !_Partition_Is_buffer_size_aligned( buffer_size ) ) - return ( RTEMS_INVALID_SIZE ); - - if ( !_Addresses_Is_aligned( starting_address ) ) - return( RTEMS_INVALID_ADDRESS ); - - if ( _Attributes_Is_global( attribute_set ) && - !_Configuration_Is_multiprocessing() ) - return( RTEMS_MP_NOT_CONFIGURED ); - - _Thread_Disable_dispatch(); /* prevents deletion */ - - the_partition = _Partition_Allocate(); - - if ( !the_partition ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - if ( _Attributes_Is_global( attribute_set ) && - !( _Objects_MP_Open( &_Partition_Information, name, - the_partition->Object.id, FALSE ) ) ) { - _Partition_Free( the_partition ); - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - the_partition->starting_address = starting_address; - the_partition->length = length; - the_partition->buffer_size = buffer_size; - the_partition->attribute_set = attribute_set; - the_partition->number_of_used_blocks = 0; - - _Chain_Initialize( &the_partition->Memory, starting_address, - length / buffer_size, buffer_size ); - - _Objects_Open( &_Partition_Information, &the_partition->Object, name ); - - *id = the_partition->Object.id; - if ( _Attributes_Is_global( attribute_set ) ) - _Partition_MP_Send_process_packet( - PARTITION_MP_ANNOUNCE_CREATE, - the_partition->Object.id, - name, - 0 /* Not used */ - ); - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_partition_ident - * - * This directive returns the system ID associated with - * the partition name. - * - * Input parameters: - * name - user defined partition name - * node - node(s) to be searched - * id - pointer to partition id - * - * Output parameters: - * *id - partition id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_partition_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -) -{ - return( _Objects_Name_to_id( &_Partition_Information, name, node, id ) ); -} - -/*PAGE - * - * rtems_partition_delete - * - * This directive allows a thread to delete a partition specified by - * the partition identifier, provided that none of its buffers are - * still allocated. - * - * Input parameters: - * id - partition id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_partition_delete( - Objects_Id id -) -{ - register Partition_Control *the_partition; - Objects_Locations location; - - the_partition = _Partition_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - if ( the_partition->number_of_used_blocks == 0 ) { - _Objects_Close( &_Partition_Information, &the_partition->Object ); - _Partition_Free( the_partition ); - if ( _Attributes_Is_global( the_partition->attribute_set ) ) { - - _Objects_MP_Close( - &_Partition_Information, - the_partition->Object.id - ); - - _Partition_MP_Send_process_packet( - PARTITION_MP_ANNOUNCE_DELETE, - the_partition->Object.id, - 0, /* Not used */ - 0 /* Not used */ - ); - } - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_RESOURCE_IN_USE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_partition_get_buffer - * - * This directive will obtain a buffer from a buffer partition. - * - * Input parameters: - * id - partition id - * buffer - pointer to buffer address - * - * Output parameters: - * buffer - pointer to buffer address filled in - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_partition_get_buffer( - Objects_Id id, - void **buffer -) -{ - register Partition_Control *the_partition; - Objects_Locations location; - void *the_buffer; - - the_partition = _Partition_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = buffer; - return( - _Partition_MP_Send_request_packet( - PARTITION_MP_GET_BUFFER_REQUEST, - id, - 0 /* Not used */ - ) - ); - case OBJECTS_LOCAL: - the_buffer = _Partition_Allocate_buffer( the_partition ); - if ( the_buffer ) { - the_partition->number_of_used_blocks += 1; - _Thread_Enable_dispatch(); - *buffer = the_buffer; - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_UNSATISFIED ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_partition_return_buffer - * - * This directive will return the given buffer to the specified - * buffer partition. - * - * Input parameters: - * id - partition id - * buffer - pointer to buffer address - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_partition_return_buffer( - Objects_Id id, - void *buffer -) -{ - register Partition_Control *the_partition; - Objects_Locations location; - - the_partition = _Partition_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return( - _Partition_MP_Send_request_packet( - PARTITION_MP_RETURN_BUFFER_REQUEST, - id, - buffer - ) - ); - case OBJECTS_LOCAL: - if ( _Partition_Is_buffer_valid( buffer, the_partition ) ) { - _Partition_Free_buffer( the_partition, buffer ); - the_partition->number_of_used_blocks -= 1; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INVALID_ADDRESS ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/partmp.c b/cpukit/rtems/src/partmp.c deleted file mode 100644 index 9cc1723106..0000000000 --- a/cpukit/rtems/src/partmp.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Multiprocessing Support for the Partition Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/part.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Partition_MP_Send_process_packet - * - */ - -void _Partition_MP_Send_process_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - Objects_Name name, - Objects_Id proxy_id -) -{ - Partition_MP_Packet *the_packet; - unsigned32 node; - - switch ( operation ) { - - case PARTITION_MP_ANNOUNCE_CREATE: - case PARTITION_MP_ANNOUNCE_DELETE: - case PARTITION_MP_EXTRACT_PROXY: - - the_packet = _Partition_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_PARTITION; - the_packet->Prefix.length = sizeof ( Partition_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Partition_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = partition_id; - the_packet->name = name; - the_packet->proxy_id = proxy_id; - - if ( operation == PARTITION_MP_EXTRACT_PROXY ) - node = rtems_get_node( partition_id ); - else - node = MPCI_ALL_NODES; - - _MPCI_Send_process_packet( node, &the_packet->Prefix ); - break; - - case PARTITION_MP_GET_BUFFER_REQUEST: - case PARTITION_MP_GET_BUFFER_RESPONSE: - case PARTITION_MP_RETURN_BUFFER_REQUEST: - case PARTITION_MP_RETURN_BUFFER_RESPONSE: - break; - } -} - -/*PAGE - * - * _Partition_MP_Send_request_packet - * - */ - -rtems_status_code _Partition_MP_Send_request_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - void *buffer -) -{ - Partition_MP_Packet *the_packet; - - switch ( operation ) { - - case PARTITION_MP_GET_BUFFER_REQUEST: - case PARTITION_MP_RETURN_BUFFER_REQUEST: - - the_packet = _Partition_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_PARTITION; - the_packet->Prefix.length = sizeof ( Partition_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Partition_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = partition_id; - the_packet->buffer = buffer; - - return - _MPCI_Send_request_packet( - rtems_get_node( partition_id ), - &the_packet->Prefix, - STATES_READY /* Not used */ - ); - - break; - - case PARTITION_MP_ANNOUNCE_CREATE: - case PARTITION_MP_ANNOUNCE_DELETE: - case PARTITION_MP_EXTRACT_PROXY: - case PARTITION_MP_GET_BUFFER_RESPONSE: - case PARTITION_MP_RETURN_BUFFER_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_SUCCESSFUL; -} - -/*PAGE - * - * _Partition_MP_Send_response_packet - * - */ - -void _Partition_MP_Send_response_packet ( - Partition_MP_Remote_operations operation, - Objects_Id partition_id, - Thread_Control *the_thread -) -{ - Partition_MP_Packet *the_packet; - - switch ( operation ) { - - case PARTITION_MP_GET_BUFFER_RESPONSE: - case PARTITION_MP_RETURN_BUFFER_RESPONSE: - - the_packet = ( Partition_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case PARTITION_MP_ANNOUNCE_CREATE: - case PARTITION_MP_ANNOUNCE_DELETE: - case PARTITION_MP_EXTRACT_PROXY: - case PARTITION_MP_GET_BUFFER_REQUEST: - case PARTITION_MP_RETURN_BUFFER_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Partition_MP_Process_packet - * - */ - -void _Partition_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Partition_MP_Packet *the_packet; - Thread_Control *the_thread; - boolean ignored; - - the_packet = (Partition_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case PARTITION_MP_ANNOUNCE_CREATE: - - ignored = _Objects_MP_Open( - &_Partition_Information, - the_packet->name, - the_packet->Prefix.id, - TRUE - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case PARTITION_MP_ANNOUNCE_DELETE: - - _Objects_MP_Close( &_Partition_Information, the_packet->Prefix.id ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case PARTITION_MP_EXTRACT_PROXY: - - the_thread = _Thread_MP_Find_proxy( the_packet->proxy_id ); - - if ( ! _Thread_Is_null( the_thread ) ) - _Thread_queue_Extract( the_thread->Wait.queue, the_thread ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case PARTITION_MP_GET_BUFFER_REQUEST: - - the_packet->Prefix.return_code = rtems_partition_get_buffer( - the_packet->Prefix.id, - &the_packet->buffer - ); - - _Partition_MP_Send_response_packet( - PARTITION_MP_GET_BUFFER_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case PARTITION_MP_GET_BUFFER_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - *(void **)the_thread->Wait.return_argument = the_packet->buffer; - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case PARTITION_MP_RETURN_BUFFER_REQUEST: - - the_packet->Prefix.return_code = rtems_partition_return_buffer( - the_packet->Prefix.id, - the_packet->buffer - ); - - _Partition_MP_Send_response_packet( - PARTITION_MP_RETURN_BUFFER_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case PARTITION_MP_RETURN_BUFFER_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - } -} - -/*PAGE - * - * _Partition_MP_Send_object_was_deleted - * - * This routine is not needed by the Partition since a partition - * cannot be deleted when buffers are in use. - * - */ - -/*PAGE - * - * _Partition_MP_Send_extract_proxy - * - */ - -void _Partition_MP_Send_extract_proxy ( - Thread_Control *the_thread -) -{ - _Partition_MP_Send_process_packet( - PARTITION_MP_EXTRACT_PROXY, - the_thread->Wait.id, - (Objects_Name) 0, - the_thread->Object.id - ); - -} - -/*PAGE - * - * _Partition_MP_Get_packet - * - */ - -Partition_MP_Packet *_Partition_MP_Get_packet ( void ) -{ - return ( (Partition_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/ratemon.c b/cpukit/rtems/src/ratemon.c deleted file mode 100644 index 3c0733a3ab..0000000000 --- a/cpukit/rtems/src/ratemon.c +++ /dev/null @@ -1,401 +0,0 @@ -/* - * Rate Monotonic Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/isr.h> -#include <rtems/object.h> -#include <rtems/ratemon.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Rate_monotonic_Manager_initialization - * - * This routine initializes all Rate Monotonic Manager related - * data structures. - * - * Input parameters: - * maximum_periods - number of periods timers to initialize - * - * Output parameters: NONE - * - * NOTE: The Rate Monotonic Manager is built on top of the Watchdog - * Handler. - */ - -void _Rate_monotonic_Manager_initialization( - unsigned32 maximum_periods -) -{ - _Objects_Initialize_information( - &_Rate_monotonic_Information, - FALSE, - maximum_periods, - sizeof( Rate_monotonic_Control ) - ); -} - -/*PAGE - * - * rtems_rate_monotonic_create - * - * This directive creates a rate monotonic timer and performs - * some initialization. - * - * Input parameters: - * name - name of period - * id - pointer to rate monotonic id - * - * Output parameters: - * id - rate monotonic id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_rate_monotonic_create( - Objects_Name name, - Objects_Id *id -) -{ - Rate_monotonic_Control *the_period; - - if ( !_Objects_Is_name_valid( name ) ) - return( RTEMS_INVALID_NAME ); - - _Thread_Disable_dispatch(); /* to prevent deletion */ - - the_period = _Rate_monotonic_Allocate(); - - if ( !the_period ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_period->owner = _Thread_Executing; - the_period->state = RATE_MONOTONIC_INACTIVE; - - _Objects_Open( &_Rate_monotonic_Information, &the_period->Object, name ); - - *id = the_period->Object.id; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_rate_monotonic_ident - * - * This directive returns the system ID associated with - * the rate monotonic period name. - * - * Input parameters: - * name - user defined period name - * id - pointer to period id - * - * Output parameters: - * *id - region id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_rate_monotonic_ident( - Objects_Name name, - Objects_Id *id -) -{ - return _Objects_Name_to_id( - &_Rate_monotonic_Information, - name, - RTEMS_SEARCH_LOCAL_NODE, - id - ); -} - -/*PAGE - * - * rtems_rate_monotonic_cancel - * - * This directive allows a thread to cancel a rate monotonic timer. - * - * Input parameters: - * id - rate monotonic id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful and caller is not the owning thread - * error code - if unsuccessful - */ - -rtems_status_code rtems_rate_monotonic_cancel( - Objects_Id id -) -{ - Rate_monotonic_Control *the_period; - Objects_Locations location; - - the_period = _Rate_monotonic_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - if ( !_Thread_Is_executing( the_period->owner ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_NOT_OWNER_OF_RESOURCE ); - } - (void) _Watchdog_Remove( &the_period->Timer ); - the_period->state = RATE_MONOTONIC_INACTIVE; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_rate_monotonic_delete - * - * This directive allows a thread to delete a rate monotonic timer. - * - * Input parameters: - * id - rate monotonic id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_rate_monotonic_delete( - Objects_Id id -) -{ - Rate_monotonic_Control *the_period; - Objects_Locations location; - - the_period = _Rate_monotonic_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - _Objects_Close( &_Rate_monotonic_Information, &the_period->Object ); - (void) _Watchdog_Remove( &the_period->Timer ); - the_period->state = RATE_MONOTONIC_INACTIVE; - _Rate_monotonic_Free( the_period ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_rate_monotonic_period - * - * This directive allows a thread to manipulate a rate monotonic timer. - * - * Input parameters: - * id - rate monotonic id - * length - length of period (in ticks) - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_rate_monotonic_period( - Objects_Id id, - rtems_interval length -) -{ - Rate_monotonic_Control *the_period; - Objects_Locations location; - rtems_status_code return_value; - - the_period = _Rate_monotonic_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - if ( !_Thread_Is_executing( the_period->owner ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_NOT_OWNER_OF_RESOURCE ); - } - - if ( length == RTEMS_PERIOD_STATUS ) { - switch ( the_period->state ) { - case RATE_MONOTONIC_INACTIVE: - return_value = RTEMS_NOT_DEFINED; - break; - case RATE_MONOTONIC_ACTIVE: - return_value = RTEMS_SUCCESSFUL; - break; - case RATE_MONOTONIC_EXPIRED: - return_value = RTEMS_TIMEOUT; - break; - default: /* unreached -- only to remove warnings */ - return_value = RTEMS_INTERNAL_ERROR; - break; - } - _Thread_Enable_dispatch(); - return( return_value ); - } - - switch ( the_period->state ) { - case RATE_MONOTONIC_INACTIVE: - the_period->state = RATE_MONOTONIC_ACTIVE; - _Watchdog_Initialize( - &the_period->Timer, - _Rate_monotonic_Timeout, - id, - NULL - ); - _Watchdog_Insert_ticks( - &the_period->Timer, length, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - - case RATE_MONOTONIC_ACTIVE: -/* following is and could be a critical section problem */ - _Thread_Executing->Wait.id = the_period->Object.id; - if ( _Rate_monotonic_Set_state( the_period ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - /* has expired -- fall into next case */ - case RATE_MONOTONIC_EXPIRED: - the_period->state = RATE_MONOTONIC_ACTIVE; - _Watchdog_Insert_ticks( - &the_period->Timer, length, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - return( RTEMS_TIMEOUT ); - } - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * _Rate_monotonic_Set_state - * - * This kernel routine sets the STATES_WAITING_FOR_PERIOD state in - * the running thread's tcb if the specified period has not expired. - * The ready chain is adjusted if necessary. - * - * Input parameters: - * the_period - pointer to period control block - * - * Output parameters: - * TRUE - if blocked successfully for period - * FALSE - if period has expired - * - * INTERRUPT LATENCY: - * delete node - * priority map - * select heir - */ - -boolean _Rate_monotonic_Set_state( -Rate_monotonic_Control *the_period -) -{ - Thread_Control *executing; - Chain_Control *ready; - ISR_Level level; - States_Control old_state; - - executing = _Thread_Executing; - ready = executing->ready; - _ISR_Disable( level ); - - old_state = executing->current_state; - - if ( _Rate_monotonic_Is_expired( the_period ) ) { - _ISR_Enable( level ); - return( FALSE ); - } - - executing->current_state = - _States_Set( STATES_WAITING_FOR_PERIOD, old_state ); - - if ( _States_Is_ready( old_state ) ) { - if ( _Chain_Has_only_one_node( ready ) ) { - _Chain_Initialize_empty( ready ); - _Priority_Remove_from_bit_map( &executing->Priority_map ); - _ISR_Flash( level ); - } else { - _Chain_Extract_unprotected( &executing->Object.Node ); - _ISR_Flash( level ); - } - - if ( _Thread_Is_heir( executing ) ) - _Thread_Calculate_heir(); - - _Context_Switch_necessary = TRUE; - } - - _ISR_Enable( level ); - return( TRUE ); -} - -/*PAGE - * - * _Rate_monotonic_Timeout - * - * This routine processes a period ending. If the owning thread - * is waiting for the period, that thread is unblocked and the - * period reinitiated. Otherwise, the period is expired. - * This routine is called by the watchdog handler. - * - * Input parameters: - * id - period id - * - * Output parameters: NONE - */ - -void _Rate_monotonic_Timeout( - Objects_Id id, - void *ignored -) -{ - Rate_monotonic_Control *the_period; - Objects_Locations location; - Thread_Control *the_thread; - - the_period = _Rate_monotonic_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - case OBJECTS_REMOTE: /* impossible */ - break; - case OBJECTS_LOCAL: - the_thread = the_period->owner; - if ( _States_Is_waiting_for_period( the_thread->current_state ) && - the_thread->Wait.id == the_period->Object.id ) { - _Thread_Unblock( the_thread ); - _Watchdog_Reset( &the_period->Timer ); - } - else - the_period->state = RATE_MONOTONIC_EXPIRED; - _Thread_Unnest_dispatch(); - break; - } -} - diff --git a/cpukit/rtems/src/region.c b/cpukit/rtems/src/region.c deleted file mode 100644 index c62214eaf6..0000000000 --- a/cpukit/rtems/src/region.c +++ /dev/null @@ -1,456 +0,0 @@ -/* - * Region Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/config.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/region.h> -#include <rtems/states.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Region_Manager_initialization - * - * This routine initializes all region manager related data structures. - * - * Input parameters: - * maximum_regions - number of regions to initialize - * - * Output parameters: NONE - */ - -void _Region_Manager_initialization( - unsigned32 maximum_regions -) -{ - _Objects_Initialize_information( - &_Region_Information, - FALSE, - maximum_regions, - sizeof( Region_Control ) - ); -} - -/*PAGE - * - * rtems_region_create - * - * This directive creates a region of physical contiguous memory area - * from which variable sized segments can be allocated. - * - * Input parameters: - * name - user defined region name - * starting_address - physical start address of region - * length - physical length in bytes - * page_size - page size in bytes - * attribute_set - region attributes - * id - address of region id to set - * - * Output parameters: - * id - region id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_create( - Objects_Name name, - void *starting_address, - unsigned32 length, - unsigned32 page_size, - rtems_attribute attribute_set, - Objects_Id *id -) -{ - Region_Control *the_region; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - - if ( !_Addresses_Is_aligned( starting_address ) ) - return( RTEMS_INVALID_ADDRESS ); - - _Thread_Disable_dispatch(); /* to prevent deletion */ - - the_region = _Region_Allocate(); - - if ( !the_region ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_region->maximum_segment_size = - _Heap_Initialize(&the_region->Memory, starting_address, length, page_size); - - if ( !the_region->maximum_segment_size ) { - _Region_Free( the_region ); - _Thread_Enable_dispatch(); - return( RTEMS_INVALID_SIZE ); - } - - the_region->starting_address = starting_address; - the_region->length = length; - the_region->page_size = page_size; - the_region->attribute_set = attribute_set; - the_region->number_of_used_blocks = 0; - - _Thread_queue_Initialize( - &the_region->Wait_queue, attribute_set, STATES_WAITING_FOR_SEGMENT ); - - _Objects_Open( &_Region_Information, &the_region->Object, name ); - - *id = the_region->Object.id; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_region_ident - * - * This directive returns the system ID associated with - * the region name. - * - * Input parameters: - * name - user defined region name - * id - pointer to region id - * - * Output parameters: - * *id - region id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_ident( - Objects_Name name, - Objects_Id *id -) -{ - return _Objects_Name_to_id( - &_Region_Information, - name, - RTEMS_SEARCH_LOCAL_NODE, - id - ); -} - -/*PAGE - * - * rtems_region_delete - * - * This directive allows a thread to delete a region specified by - * the region identifier, provided that none of its segments are - * still allocated. - * - * Input parameters: - * id - region id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_delete( - Objects_Id id -) -{ - register Region_Control *the_region; - Objects_Locations location; - - the_region = _Region_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - _Region_Debug_Walk( the_region, 5 ); - if ( the_region->number_of_used_blocks == 0 ) { - _Objects_Close( &_Region_Information, &the_region->Object ); - _Region_Free( the_region ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_RESOURCE_IN_USE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_region_extend - * - * This directive attempts to grow a region of physical contiguous memory area - * from which variable sized segments can be allocated. - * - * Input parameters: - * id - id of region to grow - * start - starting address of memory area for extension - * length - physical length in bytes to grow the region - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_extend( - Objects_Id id, - void *starting_address, - unsigned32 length -) -{ - Region_Control *the_region; - Objects_Locations location; - unsigned32 amount_extended; - Heap_Extend_status heap_status; - rtems_status_code status; - - status = RTEMS_SUCCESSFUL; - - the_region = _Region_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - - heap_status = _Heap_Extend( - &the_region->Memory, - starting_address, - length, - &amount_extended - ); - - switch ( heap_status ) { - case HEAP_EXTEND_SUCCESSFUL: - the_region->length += amount_extended; - the_region->maximum_segment_size += amount_extended; - break; - case HEAP_EXTEND_ERROR: - status = RTEMS_INVALID_ADDRESS; - break; - case HEAP_EXTEND_NOT_IMPLEMENTED: - status = RTEMS_NOT_IMPLEMENTED; - break; - } - _Thread_Enable_dispatch(); - return( status ); - } - - return( RTEMS_INTERNAL_ERROR ); -} - -/*PAGE - * - * rtems_region_get_segment - * - * This directive will obtain a segment from the given region. - * - * Input parameters: - * id - region id - * size - segment size in bytes - * option_set - wait option - * timeout - number of ticks to wait (0 means wait forever) - * segment - pointer to segment address - * - * Output parameters: - * segment - pointer to segment address filled in - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_get_segment( - Objects_Id id, - unsigned32 size, - rtems_option option_set, - rtems_interval timeout, - void **segment -) -{ - register Region_Control *the_region; - Objects_Locations location; - Thread_Control *executing; - void *the_segment; - - if ( size == 0 ) - return( RTEMS_INVALID_SIZE ); - - executing = _Thread_Executing; - the_region = _Region_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - if ( size > the_region->maximum_segment_size ) { - _Thread_Enable_dispatch(); - return( RTEMS_INVALID_SIZE ); - } - - _Region_Debug_Walk( the_region, 1 ); - - the_segment = _Region_Allocate_segment( the_region, size ); - - _Region_Debug_Walk( the_region, 2 ); - - if ( the_segment ) { - the_region->number_of_used_blocks += 1; - _Thread_Enable_dispatch(); - *segment = the_segment; - return( RTEMS_SUCCESSFUL ); - } - - if ( _Options_Is_no_wait( option_set ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_UNSATISFIED ); - } - - executing->Wait.queue = &the_region->Wait_queue; - executing->Wait.id = id; - executing->Wait.Extra.segment_size = size; - executing->Wait.return_argument = (unsigned32 *) segment; - - the_region->Wait_queue.sync = TRUE; - - _Thread_queue_Enqueue( &the_region->Wait_queue, timeout ); - - _Thread_Enable_dispatch(); - return( executing->Wait.return_code ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} -/*PAGE - * - * rtems_region_get_segment_size - * - * This directive will return the size of the segment indicated - * - * Input parameters: - * id - region id - * segment - segment address - * size - pointer to segment size in bytes - * - * Output parameters: - * size - segment size in bytes filled in - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_get_segment_size( - Objects_Id id, - void *segment, - unsigned32 *size -) -{ - register Region_Control *the_region; - Objects_Locations location; - Thread_Control *executing; - - executing = _Thread_Executing; - the_region = _Region_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - - if ( _Heap_Size_of_user_area( &the_region->Memory, segment, size ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INVALID_ADDRESS ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_region_return_segment - * - * This directive will return a segment to its region. - * - * Input parameters: - * id - region id - * segment - pointer to segment address - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_region_return_segment( - Objects_Id id, - void *segment -) -{ - register Region_Control *the_region; - Thread_Control *the_thread; - Objects_Locations location; - void **the_segment; - int status; - - the_region = _Region_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* this error cannot be returned */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - - _Region_Debug_Walk( the_region, 3 ); - - status = _Region_Free_segment( the_region, segment ); - - _Region_Debug_Walk( the_region, 4 ); - - if ( !status ) { - _Thread_Enable_dispatch(); - return( RTEMS_INVALID_ADDRESS ); - } - - the_region->number_of_used_blocks -= 1; - for ( ; ; ) { - the_thread = _Thread_queue_First( &the_region->Wait_queue ); - - if ( the_thread == NULL ) - break; - - the_segment = _Region_Allocate_segment( - the_region, the_thread->Wait.Extra.segment_size ); - - if ( the_segment == NULL ) - break; - - *(void **)the_thread->Wait.return_argument = the_segment; - the_region->number_of_used_blocks += 1; - _Thread_queue_Extract( &the_region->Wait_queue, the_thread ); - the_thread->Wait.return_code = RTEMS_SUCCESSFUL; - } - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/regionmp.c b/cpukit/rtems/src/regionmp.c deleted file mode 100644 index 558ae1639a..0000000000 --- a/cpukit/rtems/src/regionmp.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * Multiprocessing Support for the Region Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/region.h> -#include <rtems/thread.h> - -/*PAGE - * - * _Region_MP_Send_process_packet - * - */ - -void _Region_MP_Send_process_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - Objects_Name name, - Objects_Id proxy_id -) -{ - Region_MP_Packet *the_packet; - unsigned32 node; - - switch ( operation ) { - - case REGION_MP_ANNOUNCE_CREATE: - case REGION_MP_ANNOUNCE_DELETE: - case REGION_MP_EXTRACT_PROXY: - - the_packet = _Region_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_REGION; - the_packet->Prefix.length = sizeof ( Region_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Region_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = region_id; - the_packet->name = name; - the_packet->proxy_id = proxy_id; - - if ( operation == REGION_MP_EXTRACT_PROXY ) - node = rtems_get_node( region_id ); - else - node = MPCI_ALL_NODES; - - _MPCI_Send_process_packet( node, &the_packet->Prefix ); - break; - - case REGION_MP_GET_SEGMENT_REQUEST: - case REGION_MP_GET_SEGMENT_RESPONSE: - case REGION_MP_RETURN_SEGMENT_REQUEST: - case REGION_MP_RETURN_SEGMENT_RESPONSE: - break; - } -} - -/*PAGE - * - * _Region_MP_Send_request_packet - * - */ - -rtems_status_code _Region_MP_Send_request_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - void *segment, - unsigned32 size, - rtems_option option_set, - rtems_interval timeout -) -{ - Region_MP_Packet *the_packet; - - switch ( operation ) { - - case REGION_MP_GET_SEGMENT_REQUEST: - case REGION_MP_RETURN_SEGMENT_REQUEST: - - the_packet = _Region_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_REGION; - the_packet->Prefix.length = sizeof ( Region_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Region_MP_Packet ); - if ( ! _Options_Is_no_wait(option_set)) - the_packet->Prefix.timeout = timeout; - - the_packet->operation = operation; - the_packet->Prefix.id = region_id; - the_packet->segment = segment; - the_packet->size = size; - the_packet->option_set = option_set; - - return _MPCI_Send_request_packet( - rtems_get_node( region_id ), - &the_packet->Prefix, - STATES_READY /* Not used */ - ); - break; - - case REGION_MP_ANNOUNCE_CREATE: - case REGION_MP_ANNOUNCE_DELETE: - case REGION_MP_EXTRACT_PROXY: - case REGION_MP_GET_SEGMENT_RESPONSE: - case REGION_MP_RETURN_SEGMENT_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_INTERNAL_ERROR; -} - -/*PAGE - * - * _Region_MP_Send_response_packet - * - */ - -void _Region_MP_Send_response_packet ( - Region_MP_Remote_operations operation, - Objects_Id region_id, - Thread_Control *the_thread -) -{ - Region_MP_Packet *the_packet; - - switch ( operation ) { - - case REGION_MP_GET_SEGMENT_RESPONSE: - case REGION_MP_RETURN_SEGMENT_RESPONSE: - - the_packet = ( Region_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case REGION_MP_ANNOUNCE_CREATE: - case REGION_MP_ANNOUNCE_DELETE: - case REGION_MP_EXTRACT_PROXY: - case REGION_MP_GET_SEGMENT_REQUEST: - case REGION_MP_RETURN_SEGMENT_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Region_MP_Process_packet - * - */ - -void _Region_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Region_MP_Packet *the_packet; - Thread_Control *the_thread; - boolean ignored; - - the_packet = (Region_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case REGION_MP_ANNOUNCE_CREATE: - - ignored = _Objects_MP_Open( - &_Region_Information, - the_packet->name, - the_packet->Prefix.id, - TRUE - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case REGION_MP_ANNOUNCE_DELETE: - - _Objects_MP_Close( &_Region_Information, the_packet->Prefix.id ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case REGION_MP_EXTRACT_PROXY: - - the_thread = _Thread_MP_Find_proxy( the_packet->proxy_id ); - - if ( ! _Thread_Is_null( the_thread ) ) - _Thread_queue_Extract( the_thread->Wait.queue, the_thread ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case REGION_MP_GET_SEGMENT_REQUEST: - - the_packet->Prefix.return_code = rtems_region_get_segment( - the_packet->Prefix.id, - the_packet->size, - the_packet->option_set, - the_packet->Prefix.timeout, - &the_packet->segment - ); - - _Region_MP_Send_response_packet( - REGION_MP_GET_SEGMENT_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case REGION_MP_GET_SEGMENT_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - *(void **)the_thread->Wait.return_argument = the_packet->segment; - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case REGION_MP_RETURN_SEGMENT_REQUEST: - - the_packet->Prefix.return_code = rtems_region_return_segment( - the_packet->Prefix.id, - the_packet->segment - ); - - _Region_MP_Send_response_packet( - REGION_MP_RETURN_SEGMENT_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case REGION_MP_RETURN_SEGMENT_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - } -} - -/*PAGE - * - * _Region_MP_Send_object_was_deleted - * - * This routine is not needed by the Region since a region - * cannot be deleted when segments are in use. - * - */ - -/*PAGE - * - * _Region_MP_Send_extract_proxy - * - */ - -void _Region_MP_Send_extract_proxy ( - Thread_Control *the_thread -) -{ - _Region_MP_Send_process_packet( - REGION_MP_EXTRACT_PROXY, - the_thread->Wait.id, - (Objects_Name) 0, - the_thread->Object.id - ); -} - -/*PAGE - * - * _Region_MP_Get_packet - * - */ - -Region_MP_Packet *_Region_MP_Get_packet ( void ) -{ - return ( (Region_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/rtclock.c b/cpukit/rtems/src/rtclock.c deleted file mode 100644 index f82baa6337..0000000000 --- a/cpukit/rtems/src/rtclock.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Clock Manager - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/clock.h> -#include <rtems/config.h> -#include <rtems/isr.h> -#include <rtems/thread.h> -#include <rtems/tod.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * rtems_clock_get - * - * This directive returns the current date and time. If the time has - * not been set by a tm_set then an error is returned. - * - * Input parameters: - * option - which value to return - * time_buffer - pointer to output buffer (a time and date structure - * or an interval) - * - * Output parameters: - * time_buffer - output filled in - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_clock_get( - rtems_clock_get_options option, - void *time_buffer -) -{ - ISR_Level level; - rtems_interval tmp; - - switch ( option ) { - case RTEMS_CLOCK_GET_TOD: - if ( !_TOD_Is_set() ) - return( RTEMS_NOT_DEFINED ); - - *(rtems_time_of_day *)time_buffer = _TOD_Current; - return( RTEMS_SUCCESSFUL ); - - case RTEMS_CLOCK_GET_SECONDS_SINCE_EPOCH: - if ( !_TOD_Is_set() ) - return( RTEMS_NOT_DEFINED ); - - *(rtems_interval *)time_buffer = _TOD_Seconds_since_epoch; - return( RTEMS_SUCCESSFUL ); - - case RTEMS_CLOCK_GET_TICKS_SINCE_BOOT: - *(rtems_interval *)time_buffer = _TOD_Ticks_since_boot; - return( RTEMS_SUCCESSFUL ); - - case RTEMS_CLOCK_GET_TICKS_PER_SECOND: - *(rtems_interval *)time_buffer = _TOD_Ticks_per_second; - return( RTEMS_SUCCESSFUL ); - - case RTEMS_CLOCK_GET_TIME_VALUE: - if ( !_TOD_Is_set() ) - return( RTEMS_NOT_DEFINED ); - - _ISR_Disable( level ); - ((rtems_clock_time_value *)time_buffer)->seconds = - _TOD_Seconds_since_epoch; - tmp = _TOD_Current.ticks; - _ISR_Enable( level ); - - tmp *= _Configuration_Table->microseconds_per_tick; - ((rtems_clock_time_value *)time_buffer)->microseconds = tmp; - - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_SUCCESSFUL ); /* should never get here */ - -} - -/*PAGE - * - * rtems_clock_set - * - * This directive sets the date and time for this node. - * - * Input parameters: - * time_buffer - pointer to the time and date structure - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_clock_set( - rtems_time_of_day *time_buffer -) -{ - rtems_status_code local_result; - rtems_interval seconds; - - local_result = _TOD_Validate( time_buffer ); - if ( rtems_is_status_successful( local_result ) ) { - seconds = _TOD_To_seconds( time_buffer ); - _Thread_Disable_dispatch(); - _TOD_Set( time_buffer, seconds ); - _Thread_Enable_dispatch(); - - } - return( local_result ); -} - -/*PAGE - * - * rtems_clock_tick - * - * This directive notifies the executve that a tick has occurred. - * When the tick occurs the time manager updates and maintains - * the calendar time, timeslicing, and any timeout delays. - * - * Input parameters: NONE - * - * Output parameters: - * RTEMS_SUCCESSFUL - always succeeds - * - * NOTE: This routine only works for leap-years through 2099. - */ - -rtems_status_code rtems_clock_tick( void ) -{ - _TOD_Tickle_ticks(); - - _Watchdog_Tickle_ticks(); - - _Thread_Tickle_timeslice(); - - if ( _Thread_Is_context_switch_necessary() && - _Thread_Is_dispatching_enabled() ) - _Thread_Dispatch(); - - return( RTEMS_SUCCESSFUL ); -} diff --git a/cpukit/rtems/src/rtemstimer.c b/cpukit/rtems/src/rtemstimer.c deleted file mode 100644 index 076091bee4..0000000000 --- a/cpukit/rtems/src/rtemstimer.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * Timer Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/object.h> -#include <rtems/thread.h> -#include <rtems/timer.h> -#include <rtems/tod.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _Timer_Manager_initialization - * - * This routine initializes all timer manager related data structures. - * - * Input parameters: - * maximum_timers - number of timers to initialize - * - * Output parameters: NONE - */ - -void _Timer_Manager_initialization( - unsigned32 maximum_timers -) -{ - _Objects_Initialize_information( - &_Timer_Information, - FALSE, - maximum_timers, - sizeof( Timer_Control ) - ); -} - -/*PAGE - * - * rtems_timer_create - * - * This directive creates a timer and performs some initialization. - * - * Input parameters: - * name - timer name - * id - pointer to timer id - * - * Output parameters: - * id - timer id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_create( - Objects_Name name, - Objects_Id *id -) -{ - Timer_Control *the_timer; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - - _Thread_Disable_dispatch(); /* to prevent deletion */ - - the_timer = _Timer_Allocate(); - - if ( !the_timer ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_timer->the_class = TIMER_DORMANT; - - _Objects_Open( &_Timer_Information, &the_timer->Object, name ); - - *id = the_timer->Object.id; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_timer_ident - * - * This directive returns the system ID associated with - * the timer name. - * - * Input parameters: - * name - user defined message queue name - * id - pointer to timer id - * - * Output parameters: - * *id - message queue id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_ident( - Objects_Name name, - Objects_Id *id -) -{ - return _Objects_Name_to_id( - &_Timer_Information, - name, - RTEMS_SEARCH_LOCAL_NODE, - id - ); -} - -/*PAGE - * - * rtems_timer_cancel - * - * This directive allows a thread to cancel a timer. - * - * Input parameters: - * id - timer id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_cancel( - Objects_Id id -) -{ - Timer_Control *the_timer; - Objects_Locations location; - - the_timer = _Timer_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - if ( !_Timer_Is_dormant_class( the_timer->the_class ) ) { - (void) _Watchdog_Remove( &the_timer->Ticker ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INCORRECT_STATE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_timer_delete - * - * This directive allows a thread to delete a timer. - * - * Input parameters: - * id - timer id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_delete( - Objects_Id id -) -{ - Timer_Control *the_timer; - Objects_Locations location; - - the_timer = _Timer_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - _Objects_Close( &_Timer_Information, &the_timer->Object ); - (void) _Watchdog_Remove( &the_timer->Ticker ); - _Timer_Free( the_timer ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_timer_fire_after - * - * This directive allows a thread to start a timer. - * - * Input parameters: - * id - timer id - * ticks - interval until routine is fired - * routine - routine to schedule - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_fire_after( - Objects_Id id, - rtems_interval ticks, - Timer_Service routine, - void *user_data -) -{ - Timer_Control *the_timer; - Objects_Locations location; - - if ( ticks == 0 ) - return( RTEMS_INVALID_NUMBER ); - - the_timer = _Timer_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - (void) _Watchdog_Remove( &the_timer->Ticker ); - the_timer->the_class = TIMER_INTERVAL; - _Watchdog_Initialize( &the_timer->Ticker, routine, id, user_data ); - _Watchdog_Insert_ticks( &the_timer->Ticker, - ticks, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_timer_fire_when - * - * This directive allows a thread to start a timer. - * - * Input parameters: - * id - timer id - * wall_time - time of day to fire timer - * routine - routine to schedule - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_fire_when( - Objects_Id id, - rtems_time_of_day *wall_time, - Timer_Service routine, - void *user_data -) -{ - Timer_Control *the_timer; - Objects_Locations location; - rtems_status_code validate_status; - rtems_interval seconds; - - if ( !_TOD_Is_set() ) - return( RTEMS_NOT_DEFINED ); - - validate_status = _TOD_Validate( wall_time ); - if ( !rtems_is_status_successful( validate_status ) ) - return( validate_status ); - - seconds = _TOD_To_seconds( wall_time ); - if ( seconds <= _TOD_Seconds_since_epoch ) - return( RTEMS_INVALID_CLOCK ); - - the_timer = _Timer_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - (void) _Watchdog_Remove( &the_timer->Ticker ); - the_timer->the_class = TIMER_TIME_OF_DAY; - _Watchdog_Initialize( &the_timer->Ticker, routine, id, user_data ); - _Watchdog_Insert_seconds( &the_timer->Ticker, - seconds - _TOD_Seconds_since_epoch, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_timer_reset - * - * This directive allows a thread to reset a timer. - * - * Input parameters: - * id - timer id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_timer_reset( - Objects_Id id -) -{ - Timer_Control *the_timer; - Objects_Locations location; - - the_timer = _Timer_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: /* should never return this */ - return( RTEMS_INTERNAL_ERROR ); - case OBJECTS_LOCAL: - if ( _Timer_Is_interval_class( the_timer->the_class ) ) { - _Watchdog_Reset( &the_timer->Ticker ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_NOT_DEFINED ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/sem.c b/cpukit/rtems/src/sem.c deleted file mode 100644 index 19410c62f1..0000000000 --- a/cpukit/rtems/src/sem.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * Semaphore Manager - * - * DESCRIPTION: - * - * This package is the implementation of the Semaphore Manager. - * This manager utilizes standard Dijkstra counting semaphores to provide - * synchronization and mutual exclusion capabilities. - * - * Directives provided are: - * - * + create a semaphore - * + get an ID of a semaphore - * + delete a semaphore - * + acquire a semaphore - * + release a semaphore - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/attr.h> -#include <rtems/config.h> -#include <rtems/isr.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/sem.h> -#include <rtems/states.h> -#include <rtems/thread.h> -#include <rtems/threadq.h> -#include <rtems/mpci.h> - -/*PAGE - * - * _Semaphore_Manager_initialization - * - * This routine initializes all semaphore manager related data structures. - * - * Input parameters: - * maximum_semaphores - maximum configured semaphores - * - * Output parameters: NONE - */ - -void _Semaphore_Manager_initialization( - unsigned32 maximum_semaphores -) -{ - _Objects_Initialize_information( - &_Semaphore_Information, - TRUE, - maximum_semaphores, - sizeof( Semaphore_Control ) - ); -} - -/*PAGE - * - * rtems_semaphore_create - * - * This directive creates a semaphore and sets the initial value based - * on the given count. A semaphore id is returned. - * - * Input parameters: - * name - user defined semaphore name - * count - initial count of semaphore - * attribute_set - semaphore attributes - * id - pointer to semaphore id - * - * Output parameters: - * id - semaphore id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_semaphore_create( - Objects_Name name, - unsigned32 count, - rtems_attribute attribute_set, - Objects_Id *id -) -{ - register Semaphore_Control *the_semaphore; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - - if ( _Attributes_Is_global( attribute_set ) ) { - - if ( !_Configuration_Is_multiprocessing() ) - return( RTEMS_MP_NOT_CONFIGURED ); - - if ( _Attributes_Is_inherit_priority( attribute_set ) ) - return( RTEMS_NOT_DEFINED ); - - } else if ( _Attributes_Is_inherit_priority( attribute_set ) ) { - - if ( ! ( _Attributes_Is_binary_semaphore( attribute_set ) && - _Attributes_Is_priority( attribute_set ) ) ) - return( RTEMS_NOT_DEFINED ); - - } - - if ( _Attributes_Is_binary_semaphore( attribute_set ) && ( count > 1 ) ) - return( RTEMS_INVALID_NUMBER ); - - _Thread_Disable_dispatch(); /* prevents deletion */ - - the_semaphore = _Semaphore_Allocate(); - - if ( !the_semaphore ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - if ( _Attributes_Is_global( attribute_set ) && - !( _Objects_MP_Open( &_Semaphore_Information, name, - the_semaphore->Object.id, FALSE ) ) ) { - _Semaphore_Free( the_semaphore ); - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_semaphore->attribute_set = attribute_set; - the_semaphore->count = count; - - if ( _Attributes_Is_binary_semaphore( attribute_set ) && count == 0 ) { - the_semaphore->nest_count = 1; - the_semaphore->holder = _Thread_Executing; - the_semaphore->holder_id = _Thread_Executing->Object.id; - _Thread_Executing->resource_count++; - } else { - the_semaphore->nest_count = 0; - the_semaphore->holder = NULL; - the_semaphore->holder_id = 0; - } - - _Thread_queue_Initialize( &the_semaphore->Wait_queue, - attribute_set, STATES_WAITING_FOR_SEMAPHORE ); - - _Objects_Open( &_Semaphore_Information, &the_semaphore->Object, name ); - - *id = the_semaphore->Object.id; - - if ( _Attributes_Is_global( attribute_set ) ) - _Semaphore_MP_Send_process_packet( - SEMAPHORE_MP_ANNOUNCE_CREATE, - the_semaphore->Object.id, - name, - 0 /* Not used */ - ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_semaphore_ident - * - * This directive returns the system ID associated with - * the semaphore name. - * - * Input parameters: - * name - user defined semaphore name - * node - node(s) to be searched - * id - pointer to semaphore id - * - * Output parameters: - * *id - semaphore id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_semaphore_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -) -{ - return( _Objects_Name_to_id( &_Semaphore_Information, name, node, id ) ); -} - -/*PAGE - * - * rtems_semaphore_delete - * - * This directive allows a thread to delete a semaphore specified by - * the semaphore id. The semaphore is freed back to the inactive - * semaphore chain. - * - * Input parameters: - * id - semaphore id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_semaphore_delete( - Objects_Id id -) -{ - register Semaphore_Control *the_semaphore; - Objects_Locations location; - - the_semaphore = _Semaphore_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - if ( _Attributes_Is_binary_semaphore( the_semaphore->attribute_set) && - ( the_semaphore->count == 0 ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_RESOURCE_IN_USE ); - } - - _Objects_Close( &_Semaphore_Information, &the_semaphore->Object ); - - _Thread_queue_Flush( - &the_semaphore->Wait_queue, - _Semaphore_MP_Send_object_was_deleted - ); - - _Semaphore_Free( the_semaphore ); - - if ( _Attributes_Is_global( the_semaphore->attribute_set ) ) { - - _Objects_MP_Close( &_Semaphore_Information, the_semaphore->Object.id ); - - _Semaphore_MP_Send_process_packet( - SEMAPHORE_MP_ANNOUNCE_DELETE, - the_semaphore->Object.id, - 0, /* Not used */ - 0 /* Not used */ - ); - } - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_semaphore_obtain - * - * This directive allows a thread to acquire a semaphore. - * - * Input parameters: - * id - semaphore id - * option_set - wait option - * timeout - number of ticks to wait (0 means wait forever) - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_semaphore_obtain( - Objects_Id id, - unsigned32 option_set, - rtems_interval timeout -) -{ - register Semaphore_Control *the_semaphore; - Objects_Locations location; - - the_semaphore = _Semaphore_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return _Semaphore_MP_Send_request_packet( - SEMAPHORE_MP_OBTAIN_REQUEST, - id, - option_set, - timeout - ); - case OBJECTS_LOCAL: - if ( !_Semaphore_Seize( the_semaphore, option_set ) ) { - if ( _Attributes_Is_inherit_priority( the_semaphore->attribute_set ) && - the_semaphore->holder->current_priority > - _Thread_Executing->current_priority ) { - _Thread_Change_priority( - the_semaphore->holder, _Thread_Executing->current_priority ); - } - _Thread_queue_Enqueue( &the_semaphore->Wait_queue, timeout ); - } - _Thread_Enable_dispatch(); - return( _Thread_Executing->Wait.return_code ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_semaphore_release - * - * This directive allows a thread to release a semaphore. - * - * Input parameters: - * id - semaphore id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_semaphore_release( - Objects_Id id -) -{ - register Semaphore_Control *the_semaphore; - Objects_Locations location; - Thread_Control *the_thread; - - the_semaphore = _Semaphore_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return( - _Semaphore_MP_Send_request_packet( - SEMAPHORE_MP_RELEASE_REQUEST, - id, - 0, /* Not used */ - MPCI_DEFAULT_TIMEOUT - ) - ); - case OBJECTS_LOCAL: - if ( _Attributes_Is_binary_semaphore( the_semaphore->attribute_set)) { - - if ( !_Objects_Are_ids_equal( - _Thread_Executing->Object.id, the_semaphore->holder_id ) ) { - _Thread_Enable_dispatch(); - return( RTEMS_NOT_OWNER_OF_RESOURCE ); - } - - the_semaphore->nest_count--; - - if ( the_semaphore->nest_count != 0 ) { - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - _Thread_Executing->resource_count--; - the_semaphore->holder = NULL; - the_semaphore->holder_id = 0; - - /* - * Whether or not someone is waiting for the semaphore, an - * inherited priority must be lowered if this is the last - * semaphore (i.e. resource) this task has. - */ - - if ( _Attributes_Is_inherit_priority(the_semaphore->attribute_set) && - _Thread_Executing->resource_count == 0 && - _Thread_Executing->real_priority != - _Thread_Executing->current_priority ) { - _Thread_Change_priority( - _Thread_Executing, _Thread_Executing->real_priority ); - } - - } - - if ( (the_thread = _Thread_queue_Dequeue(&the_semaphore->Wait_queue)) ) { - - if ( !_Objects_Is_local_id( the_thread->Object.id ) ) { - the_thread->receive_packet->return_code = RTEMS_SUCCESSFUL; - - if ( _Attributes_Is_binary_semaphore(the_semaphore->attribute_set) ) { - the_semaphore->holder = NULL; - the_semaphore->holder_id = the_thread->Object.id; - the_semaphore->nest_count = 1; - } - - _Semaphore_MP_Send_response_packet( - SEMAPHORE_MP_OBTAIN_RESPONSE, - id, - the_thread - ); - } else { - - if ( _Attributes_Is_binary_semaphore(the_semaphore->attribute_set) ) { - the_semaphore->holder = the_thread; - the_semaphore->holder_id = the_thread->Object.id; - the_thread->resource_count++; - the_semaphore->nest_count = 1; - } - - /* - * No special action for priority inheritance because the_thread - * is guaranteed to be the highest priority thread waiting for - * the semaphore. - */ - } - } else - the_semaphore->count += 1; - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * _Semaphore_Seize - * - * This routine attempts to allocate a semaphore to the calling thread. - * - * Input parameters: - * the_semaphore - pointer to semaphore control block - * option_set - acquire semaphore options - * - * Output parameters: - * TRUE - if semaphore allocated - * FALSE - if semaphore NOT allocated - * - * INTERRUPT LATENCY: - * available - * wait - */ - -boolean _Semaphore_Seize( - Semaphore_Control *the_semaphore, - rtems_option option_set -) -{ - Thread_Control *executing; - ISR_Level level; - - executing = _Thread_Executing; - executing->Wait.return_code = RTEMS_SUCCESSFUL; - _ISR_Disable( level ); - if ( the_semaphore->count != 0 ) { - the_semaphore->count -= 1; - if ( _Attributes_Is_binary_semaphore( the_semaphore->attribute_set ) ) { - the_semaphore->holder = executing; - the_semaphore->holder_id = executing->Object.id; - the_semaphore->nest_count = 1; - executing->resource_count++; - } - _ISR_Enable( level ); - return( TRUE ); - } - - if ( _Options_Is_no_wait( option_set ) ) { - _ISR_Enable( level ); - executing->Wait.return_code = RTEMS_UNSATISFIED; - return( TRUE ); - } - - if ( _Attributes_Is_binary_semaphore( the_semaphore->attribute_set ) ) { - if ( _Objects_Are_ids_equal( - _Thread_Executing->Object.id, the_semaphore->holder_id ) ) { - the_semaphore->nest_count++; - _ISR_Enable( level ); - return( TRUE ); - } - } - - the_semaphore->Wait_queue.sync = TRUE; - executing->Wait.queue = &the_semaphore->Wait_queue; - executing->Wait.id = the_semaphore->Object.id; - executing->Wait.option_set = option_set; - _ISR_Enable( level ); - return( FALSE ); -} diff --git a/cpukit/rtems/src/semmp.c b/cpukit/rtems/src/semmp.c deleted file mode 100644 index d131d48150..0000000000 --- a/cpukit/rtems/src/semmp.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Multiprocessing Support for the Semaphore Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/sem.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _Semaphore_MP_Send_process_packet - * - */ - -void _Semaphore_MP_Send_process_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - Objects_Name name, - Objects_Id proxy_id -) -{ - Semaphore_MP_Packet *the_packet; - unsigned32 node; - - switch ( operation ) { - - case SEMAPHORE_MP_ANNOUNCE_CREATE: - case SEMAPHORE_MP_ANNOUNCE_DELETE: - case SEMAPHORE_MP_EXTRACT_PROXY: - - the_packet = _Semaphore_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_SEMAPHORE; - the_packet->Prefix.length = sizeof ( Semaphore_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Semaphore_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = semaphore_id; - the_packet->name = name; - the_packet->proxy_id = proxy_id; - - if ( operation == SEMAPHORE_MP_EXTRACT_PROXY ) - node = rtems_get_node( semaphore_id ); - else - node = MPCI_ALL_NODES; - - _MPCI_Send_process_packet( node, &the_packet->Prefix ); - break; - - case SEMAPHORE_MP_OBTAIN_REQUEST: - case SEMAPHORE_MP_OBTAIN_RESPONSE: - case SEMAPHORE_MP_RELEASE_REQUEST: - case SEMAPHORE_MP_RELEASE_RESPONSE: - break; - } -} - -/*PAGE - * - * _Semaphore_MP_Send_request_packet - * - */ - -rtems_status_code _Semaphore_MP_Send_request_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - rtems_option option_set, - rtems_interval timeout -) -{ - Semaphore_MP_Packet *the_packet; - - switch ( operation ) { - - case SEMAPHORE_MP_OBTAIN_REQUEST: - case SEMAPHORE_MP_RELEASE_REQUEST: - - the_packet = _Semaphore_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_SEMAPHORE; - the_packet->Prefix.length = sizeof ( Semaphore_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Semaphore_MP_Packet ); - if ( ! _Options_Is_no_wait(option_set)) - the_packet->Prefix.timeout = timeout; - - the_packet->operation = operation; - the_packet->Prefix.id = semaphore_id; - the_packet->option_set = option_set; - - return _MPCI_Send_request_packet( - rtems_get_node( semaphore_id ), - &the_packet->Prefix, - STATES_WAITING_FOR_SEMAPHORE - ); - break; - - case SEMAPHORE_MP_ANNOUNCE_CREATE: - case SEMAPHORE_MP_ANNOUNCE_DELETE: - case SEMAPHORE_MP_EXTRACT_PROXY: - case SEMAPHORE_MP_OBTAIN_RESPONSE: - case SEMAPHORE_MP_RELEASE_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_SUCCESSFUL; -} - -/*PAGE - * - * _Semaphore_MP_Send_response_packet - * - */ - -void _Semaphore_MP_Send_response_packet ( - Semaphore_MP_Remote_operations operation, - Objects_Id semaphore_id, - Thread_Control *the_thread -) -{ - Semaphore_MP_Packet *the_packet; - - switch ( operation ) { - - case SEMAPHORE_MP_OBTAIN_RESPONSE: - case SEMAPHORE_MP_RELEASE_RESPONSE: - - the_packet = ( Semaphore_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case SEMAPHORE_MP_ANNOUNCE_CREATE: - case SEMAPHORE_MP_ANNOUNCE_DELETE: - case SEMAPHORE_MP_EXTRACT_PROXY: - case SEMAPHORE_MP_OBTAIN_REQUEST: - case SEMAPHORE_MP_RELEASE_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Semaphore_MP_Process_packet - * - */ - -void _Semaphore_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Semaphore_MP_Packet *the_packet; - Thread_Control *the_thread; - boolean ignored; - - the_packet = (Semaphore_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case SEMAPHORE_MP_ANNOUNCE_CREATE: - - ignored = _Objects_MP_Open( - &_Semaphore_Information, - the_packet->name, - the_packet->Prefix.id, - TRUE - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case SEMAPHORE_MP_ANNOUNCE_DELETE: - - _Objects_MP_Close( &_Semaphore_Information, the_packet->Prefix.id ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case SEMAPHORE_MP_EXTRACT_PROXY: - - the_thread = _Thread_MP_Find_proxy( the_packet->proxy_id ); - - if ( ! _Thread_Is_null( the_thread ) ) - _Thread_queue_Extract( the_thread->Wait.queue, the_thread ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case SEMAPHORE_MP_OBTAIN_REQUEST: - - the_packet->Prefix.return_code = rtems_semaphore_obtain( - the_packet->Prefix.id, - the_packet->option_set, - the_packet->Prefix.timeout - ); - - if ( ! _Status_Is_proxy_blocking( the_packet->Prefix.return_code ) ) - _Semaphore_MP_Send_response_packet( - SEMAPHORE_MP_OBTAIN_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - - case SEMAPHORE_MP_OBTAIN_RESPONSE: - case SEMAPHORE_MP_RELEASE_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case SEMAPHORE_MP_RELEASE_REQUEST: - - the_packet->Prefix.return_code = rtems_semaphore_release( - the_packet->Prefix.id - ); - - _Semaphore_MP_Send_response_packet( - SEMAPHORE_MP_RELEASE_RESPONSE, - the_packet->Prefix.id, - _Thread_Executing - ); - break; - } -} - -/*PAGE - * - * _Semaphore_MP_Send_object_was_deleted - * - */ - -void _Semaphore_MP_Send_object_was_deleted ( - Thread_Control *the_proxy -) -{ - the_proxy->receive_packet->return_code = RTEMS_OBJECT_WAS_DELETED; - - _Semaphore_MP_Send_response_packet( - SEMAPHORE_MP_OBTAIN_RESPONSE, - the_proxy->Wait.id, - the_proxy - ); - -} - -/*PAGE - * - * _Semaphore_MP_Send_extract_proxy - * - */ - -void _Semaphore_MP_Send_extract_proxy ( - Thread_Control *the_thread -) -{ - _Semaphore_MP_Send_process_packet( - SEMAPHORE_MP_EXTRACT_PROXY, - the_thread->Wait.id, - (Objects_Name) 0, - the_thread->Object.id - ); - -} - -/*PAGE - * - * _Semaphore_MP_Get_packet - * - */ - -Semaphore_MP_Packet *_Semaphore_MP_Get_packet ( void ) -{ - return ( (Semaphore_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/signal.c b/cpukit/rtems/src/signal.c deleted file mode 100644 index 411df5d86c..0000000000 --- a/cpukit/rtems/src/signal.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Signal Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/asr.h> -#include <rtems/isr.h> -#include <rtems/modes.h> -#include <rtems/signal.h> -#include <rtems/thread.h> - -/*PAGE - * - * rtems_signal_catch - * - * This directive allows a thread to specify what action to take when - * catching signals. - * - * Input parameters: - * handler - address of asynchronous signal routine (asr) - * ( NULL indicates asr is invalid ) - * mode_set - mode value for asr - * - * Output parameters: - * RTEMS_SUCCESSFUL - always succeeds - */ - -rtems_status_code rtems_signal_catch( - rtems_asr_entry handler, - rtems_mode mode_set -) -{ - Thread_Control *executing; - - executing = _Thread_Executing; - _Thread_Disable_dispatch(); /* cannot reschedule while */ - /* the thread is inconsistent */ - - if ( ! _ASR_Is_null_handler( handler ) ) { - executing->Signal.mode_set = mode_set; - executing->Signal.handler = handler; - } - else - _ASR_Initialize( &executing->Signal ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_signal_send - * - * This directive allows a thread to send signals to a thread. - * - * Input parameters: - * id - thread id - * signal_set - signal set - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_signal_send( - Objects_Id id, - rtems_signal_set signal_set -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return _Signal_MP_Send_request_packet( - SIGNAL_MP_SEND_REQUEST, - id, - signal_set - ); - case OBJECTS_LOCAL: - if ( ! _ASR_Is_null_handler( the_thread->Signal.handler ) ) { - if ( _Modes_Is_asr_disabled( the_thread->current_modes ) ) - _ASR_Post_signals( signal_set, &the_thread->Signal.signals_pending ); - else { - _ASR_Post_signals( signal_set, &the_thread->Signal.signals_posted ); - if ( _ISR_Is_in_progress() && _Thread_Is_executing( the_thread ) ) - _ISR_Signals_to_thread_executing = TRUE; - } - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_NOT_DEFINED ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} diff --git a/cpukit/rtems/src/signalmp.c b/cpukit/rtems/src/signalmp.c deleted file mode 100644 index 4ac8123766..0000000000 --- a/cpukit/rtems/src/signalmp.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Multiprocessing Support for the Signal Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/signal.h> -#include <rtems/states.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _Signal_MP_Send_process_packet - * - * This subprogram is not needed since there are no process - * packets to be sent by this manager. - * - */ - -/*PAGE - * - * _Signal_MP_Send_request_packet - * - */ - -rtems_status_code _Signal_MP_Send_request_packet ( - Signal_MP_Remote_operations operation, - Objects_Id task_id, - rtems_signal_set signal_in -) -{ - Signal_MP_Packet *the_packet; - - switch ( operation ) { - - case SIGNAL_MP_SEND_REQUEST: - - the_packet = _Signal_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_SIGNAL; - the_packet->Prefix.length = sizeof ( Signal_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( Signal_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = task_id; - the_packet->signal_in = signal_in; - - return _MPCI_Send_request_packet( - rtems_get_node( task_id ), - &the_packet->Prefix, - STATES_READY /* Not used */ - ); - break; - - case SIGNAL_MP_SEND_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_INTERNAL_ERROR; -} - -/*PAGE - * - * _Signal_MP_Send_response_packet - * - */ - -void _Signal_MP_Send_response_packet ( - Signal_MP_Remote_operations operation, - Thread_Control *the_thread -) -{ - Signal_MP_Packet *the_packet; - - switch ( operation ) { - - case SIGNAL_MP_SEND_RESPONSE: - - the_packet = ( Signal_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case SIGNAL_MP_SEND_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _Signal_MP_Process_packet - * - */ - -void _Signal_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - Signal_MP_Packet *the_packet; - Thread_Control *the_thread; - - the_packet = (Signal_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case SIGNAL_MP_SEND_REQUEST: - - the_packet->Prefix.return_code = rtems_signal_send( - the_packet->Prefix.id, - the_packet->signal_in - ); - - _Signal_MP_Send_response_packet( - SIGNAL_MP_SEND_RESPONSE, - _Thread_Executing - ); - break; - - case SIGNAL_MP_SEND_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - } -} - -/*PAGE - * - * _Signal_MP_Send_object_was_deleted - * - * This subprogram is not needed since there are no objects - * deleted by this manager. - * - */ - -/*PAGE - * - * _Signal_MP_Send_extract_proxy - * - * This subprogram is not needed since there are no objects - * deleted by this manager. - * - */ - -/*PAGE - * - * _Signal_MP_Get_packet - * - */ - -Signal_MP_Packet *_Signal_MP_Get_packet ( void ) -{ - return ( (Signal_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/taskmp.c b/cpukit/rtems/src/taskmp.c deleted file mode 100644 index b938c60c53..0000000000 --- a/cpukit/rtems/src/taskmp.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * Multiprocessing Support for the RTEMS Task Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/mpci.h> -#include <rtems/mppkt.h> -#include <rtems/object.h> -#include <rtems/options.h> -#include <rtems/tasks.h> -#include <rtems/thread.h> -#include <rtems/watchdog.h> - -/*PAGE - * - * _RTEMS_tasks_MP_Send_process_packet - * - */ - -void _RTEMS_tasks_MP_Send_process_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Objects_Id task_id, - Objects_Name name -) -{ - RTEMS_tasks_MP_Packet *the_packet; - - switch ( operation ) { - - case RTEMS_TASKS_MP_ANNOUNCE_CREATE: - case RTEMS_TASKS_MP_ANNOUNCE_DELETE: - - the_packet = _RTEMS_tasks_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_TASKS; - the_packet->Prefix.length = sizeof ( RTEMS_tasks_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( RTEMS_tasks_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = task_id; - the_packet->name = name; - - _MPCI_Send_process_packet( MPCI_ALL_NODES, &the_packet->Prefix ); - break; - - case RTEMS_TASKS_MP_SUSPEND_REQUEST: - case RTEMS_TASKS_MP_SUSPEND_RESPONSE: - case RTEMS_TASKS_MP_RESUME_REQUEST: - case RTEMS_TASKS_MP_RESUME_RESPONSE: - case RTEMS_TASKS_MP_SET_PRIORITY_REQUEST: - case RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE: - case RTEMS_TASKS_MP_GET_NOTE_REQUEST: - case RTEMS_TASKS_MP_GET_NOTE_RESPONSE: - case RTEMS_TASKS_MP_SET_NOTE_REQUEST: - case RTEMS_TASKS_MP_SET_NOTE_RESPONSE: - break; - } -} - -/*PAGE - * - * _RTEMS_tasks_MP_Send_request_packet - * - */ - -rtems_status_code _RTEMS_tasks_MP_Send_request_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Objects_Id task_id, - rtems_task_priority new_priority, - unsigned32 notepad, - unsigned32 note -) -{ - RTEMS_tasks_MP_Packet *the_packet; - - switch ( operation ) { - - case RTEMS_TASKS_MP_SUSPEND_REQUEST: - case RTEMS_TASKS_MP_RESUME_REQUEST: - case RTEMS_TASKS_MP_SET_PRIORITY_REQUEST: - case RTEMS_TASKS_MP_GET_NOTE_REQUEST: - case RTEMS_TASKS_MP_SET_NOTE_REQUEST: - - the_packet = _RTEMS_tasks_MP_Get_packet(); - the_packet->Prefix.the_class = RTEMS_MP_PACKET_TASKS; - the_packet->Prefix.length = sizeof ( RTEMS_tasks_MP_Packet ); - the_packet->Prefix.to_convert = sizeof ( RTEMS_tasks_MP_Packet ); - the_packet->operation = operation; - the_packet->Prefix.id = task_id; - the_packet->the_priority = new_priority; - the_packet->notepad = notepad; - the_packet->note = note; - - return _MPCI_Send_request_packet( - rtems_get_node( task_id ), - &the_packet->Prefix, - STATES_READY /* Not used */ - ); - break; - - case RTEMS_TASKS_MP_ANNOUNCE_CREATE: - case RTEMS_TASKS_MP_ANNOUNCE_DELETE: - case RTEMS_TASKS_MP_SUSPEND_RESPONSE: - case RTEMS_TASKS_MP_RESUME_RESPONSE: - case RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE: - case RTEMS_TASKS_MP_GET_NOTE_RESPONSE: - case RTEMS_TASKS_MP_SET_NOTE_RESPONSE: - break; - - } - /* - * The following line is included to satisfy compilers which - * produce warnings when a function does not end with a return. - */ - return RTEMS_SUCCESSFUL; -} - -/*PAGE - * - * _RTEMS_tasks_MP_Send_response_packet - * - */ - -void _RTEMS_tasks_MP_Send_response_packet ( - RTEMS_tasks_MP_Remote_operations operation, - Thread_Control *the_thread -) -{ - RTEMS_tasks_MP_Packet *the_packet; - - switch ( operation ) { - - case RTEMS_TASKS_MP_SUSPEND_RESPONSE: - case RTEMS_TASKS_MP_RESUME_RESPONSE: - case RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE: - case RTEMS_TASKS_MP_GET_NOTE_RESPONSE: - case RTEMS_TASKS_MP_SET_NOTE_RESPONSE: - - the_packet = (RTEMS_tasks_MP_Packet *) the_thread->receive_packet; - -/* - * The packet being returned already contains the class, length, and - * to_convert fields, therefore they are not set in this routine. - */ - the_packet->operation = operation; - the_packet->Prefix.id = the_packet->Prefix.source_tid; - - _MPCI_Send_response_packet( - rtems_get_node( the_packet->Prefix.source_tid ), - &the_packet->Prefix - ); - break; - - case RTEMS_TASKS_MP_ANNOUNCE_CREATE: - case RTEMS_TASKS_MP_ANNOUNCE_DELETE: - case RTEMS_TASKS_MP_SUSPEND_REQUEST: - case RTEMS_TASKS_MP_RESUME_REQUEST: - case RTEMS_TASKS_MP_SET_PRIORITY_REQUEST: - case RTEMS_TASKS_MP_GET_NOTE_REQUEST: - case RTEMS_TASKS_MP_SET_NOTE_REQUEST: - break; - - } -} - -/*PAGE - * - * - * _RTEMS_tasks_MP_Process_packet - * - */ - -void _RTEMS_tasks_MP_Process_packet ( - rtems_packet_prefix *the_packet_prefix -) -{ - RTEMS_tasks_MP_Packet *the_packet; - Thread_Control *the_thread; - boolean ignored; - - the_packet = (RTEMS_tasks_MP_Packet *) the_packet_prefix; - - switch ( the_packet->operation ) { - - case RTEMS_TASKS_MP_ANNOUNCE_CREATE: - - ignored = _Objects_MP_Open( - &_Thread_Information, - the_packet->name, - the_packet->Prefix.id, - TRUE - ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case RTEMS_TASKS_MP_ANNOUNCE_DELETE: - - _Objects_MP_Close( &_Thread_Information, the_packet->Prefix.id ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case RTEMS_TASKS_MP_SUSPEND_REQUEST: - - the_packet->Prefix.return_code = rtems_task_suspend( - the_packet->Prefix.id - ); - - _RTEMS_tasks_MP_Send_response_packet( - RTEMS_TASKS_MP_SUSPEND_RESPONSE, - _Thread_Executing - ); - break; - - case RTEMS_TASKS_MP_SUSPEND_RESPONSE: - case RTEMS_TASKS_MP_RESUME_RESPONSE: - case RTEMS_TASKS_MP_SET_NOTE_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case RTEMS_TASKS_MP_RESUME_REQUEST: - - the_packet->Prefix.return_code = rtems_task_resume( - the_packet->Prefix.id - ); - - _RTEMS_tasks_MP_Send_response_packet( - RTEMS_TASKS_MP_RESUME_RESPONSE, - _Thread_Executing - ); - break; - - case RTEMS_TASKS_MP_SET_PRIORITY_REQUEST: - - the_packet->Prefix.return_code = rtems_task_set_priority( - the_packet->Prefix.id, - the_packet->the_priority, - &the_packet->the_priority - ); - - _RTEMS_tasks_MP_Send_response_packet( - RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE, - _Thread_Executing - ); - break; - - case RTEMS_TASKS_MP_SET_PRIORITY_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - *(rtems_task_priority *)the_thread->Wait.return_argument = - the_packet->the_priority; - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case RTEMS_TASKS_MP_GET_NOTE_REQUEST: - - the_packet->Prefix.return_code = rtems_task_get_note( - the_packet->Prefix.id, - the_packet->notepad, - &the_packet->note - ); - - _RTEMS_tasks_MP_Send_response_packet( - RTEMS_TASKS_MP_GET_NOTE_RESPONSE, - _Thread_Executing - ); - break; - - case RTEMS_TASKS_MP_GET_NOTE_RESPONSE: - - the_thread = _MPCI_Process_response( the_packet_prefix ); - - *(unsigned32 *)the_thread->Wait.return_argument = the_packet->note; - - _MPCI_Return_packet( the_packet_prefix ); - break; - - case RTEMS_TASKS_MP_SET_NOTE_REQUEST: - - the_packet->Prefix.return_code = rtems_task_set_note( - the_packet->Prefix.id, - the_packet->notepad, - the_packet->note - ); - - _RTEMS_tasks_MP_Send_response_packet( - RTEMS_TASKS_MP_SET_NOTE_RESPONSE, - _Thread_Executing - ); - break; - } -} - -/*PAGE - * - * _RTEMS_tasks_MP_Send_object_was_deleted - * - * This routine is not neededby the Tasks since a task - * cannot be globally deleted. - * - */ - -/*PAGE - * - * _RTEMS_tasks_MP_Send_extract_proxy - * - * This routine is not neededby the Tasks since a task - * cannot be globally deleted. - * - */ - -/*PAGE - * - * _RTEMS_tasks_MP_Get_packet - * - */ - -RTEMS_tasks_MP_Packet *_RTEMS_tasks_MP_Get_packet ( void ) -{ - return ( (RTEMS_tasks_MP_Packet *) _MPCI_Get_packet() ); -} - -/* end of file */ diff --git a/cpukit/rtems/src/tasks.c b/cpukit/rtems/src/tasks.c deleted file mode 100644 index edba524d94..0000000000 --- a/cpukit/rtems/src/tasks.c +++ /dev/null @@ -1,816 +0,0 @@ -/* - * RTEMS Task Manager - * - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/modes.h> -#include <rtems/object.h> -#include <rtems/stack.h> -#include <rtems/states.h> -#include <rtems/tasks.h> -#include <rtems/thread.h> -#include <rtems/threadq.h> -#include <rtems/tod.h> -#include <rtems/userext.h> -#include <rtems/wkspace.h> - -/*PAGE - * - * rtems_task_create - * - * This directive creates a thread by allocating and initializing a - * thread control block and a stack. The newly created thread is - * placed in the dormant state. - * - * Input parameters: - * name - user defined thread name - * initial_priority - thread priority - * stack_size - stack size in bytes - * initial_modes - initial thread mode - * attribute_set - thread attributes - * id - pointer to thread id - * - * Output parameters: - * id - thread id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_create( - Objects_Name name, - rtems_task_priority initial_priority, - unsigned32 stack_size, - rtems_mode initial_modes, - rtems_attribute attribute_set, - Objects_Id *id -) -{ - register Thread_Control *the_thread; - unsigned32 actual_stack_size; - unsigned32 memory_needed; - void *memory; - rtems_attribute the_attribute_set; - - if ( !_Objects_Is_name_valid( name ) ) - return ( RTEMS_INVALID_NAME ); - -#if 0 - if ( !_Stack_Is_enough( stack_size ) ) - return( RTEMS_INVALID_SIZE ); -#endif - - if ( !_Stack_Is_enough( stack_size ) ) - actual_stack_size = RTEMS_MINIMUM_STACK_SIZE; - else - actual_stack_size = stack_size; - - if ( !_Priority_Is_valid( initial_priority ) ) - return( RTEMS_INVALID_PRIORITY ); - - /* - * Fix the attribute set to match the attributes which - * this processor (1) requires and (2) is able to support. - * First add in the required flags for attribute_set - * Typically this might include FP if the platform - * or application required all tasks to be fp aware. - * Then turn off the requested bits which are not supported. - */ - - the_attribute_set = _Attributes_Set( attribute_set, ATTRIBUTES_REQUIRED ); - the_attribute_set = - _Attributes_Clear( the_attribute_set, ATTRIBUTES_NOT_SUPPORTED ); - - if ( _Attributes_Is_global( the_attribute_set ) && - !_Configuration_Is_multiprocessing() ) - return( RTEMS_MP_NOT_CONFIGURED ); - - _Thread_Disable_dispatch(); /* to prevent deletion */ - - the_thread = _RTEMS_tasks_Allocate(); - - if ( !the_thread ) { - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - actual_stack_size = _Stack_Adjust_size( actual_stack_size ); - memory_needed = actual_stack_size; - - if ( _Attributes_Is_floating_point( the_attribute_set ) ) - memory_needed += CONTEXT_FP_SIZE; - - memory = _Workspace_Allocate( memory_needed ); - - if ( !memory ) { - _RTEMS_tasks_Free( the_thread ); - _Thread_Enable_dispatch(); - return( RTEMS_UNSATISFIED ); - } - - /* - * Stack is put in the lower address regions of the allocated memory. - * The optional floating point context area goes into the higher part - * of the allocated memory. - */ - - _Stack_Initialize( - &the_thread->Start.Initial_stack, memory, actual_stack_size ); - - if ( _Attributes_Is_floating_point( the_attribute_set ) ) - the_thread->fp_context = _Context_Fp_start( memory, actual_stack_size ); - else - the_thread->fp_context = NULL; - - the_thread->Start.fp_context = the_thread->fp_context; - - if ( _Attributes_Is_global( the_attribute_set ) && - !( _Objects_MP_Open( &_Thread_Information, name, - the_thread->Object.id, FALSE ) ) ) { - _RTEMS_tasks_Free( the_thread ); - (void) _Workspace_Free( memory ); - _Thread_Enable_dispatch(); - return( RTEMS_TOO_MANY ); - } - - the_thread->name = name; - the_thread->attribute_set = the_attribute_set; - the_thread->current_state = STATES_DORMANT; - the_thread->current_modes = initial_modes; - the_thread->pending_events = EVENT_SETS_NONE_PENDING; - the_thread->resource_count = 0; - the_thread->real_priority = initial_priority; - the_thread->Start.initial_priority = initial_priority; - the_thread->Start.initial_modes = initial_modes; - - _Thread_Set_priority( the_thread, initial_priority ); - - _ASR_Initialize( &the_thread->Signal ); - - _Objects_Open( &_Thread_Information, &the_thread->Object, name ); - - *id = the_thread->Object.id; - - _User_extensions_Task_create( the_thread ); - - if ( _Attributes_Is_global( the_attribute_set ) ) - _RTEMS_tasks_MP_Send_process_packet( - RTEMS_TASKS_MP_ANNOUNCE_CREATE, - the_thread->Object.id, - name - ); - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_task_ident - * - * This directive returns the system ID associated with - * the thread name. - * - * Input parameters: - * name - user defined thread name - * node - node(s) to be searched - * id - pointer to thread id - * - * Output parameters: - * *id - thread id - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_ident( - Objects_Name name, - unsigned32 node, - Objects_Id *id -) -{ - if ( name != OBJECTS_ID_OF_SELF ) - return( _Objects_Name_to_id( &_Thread_Information, name, node, id ) ); - - *id = _Thread_Executing->Object.id; - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_task_start - * - * This directive readies the thread identified by the "id" - * based on its current priorty, to await execution. A thread - * can be started only from the dormant state. - * - * Input parameters: - * id - thread id - * entry_point - start execution address of thread - * argument - thread argument - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_start( - Objects_Id id, - rtems_task_entry entry_point, - unsigned32 argument -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - if ( entry_point == NULL ) - return( RTEMS_INVALID_ADDRESS ); - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - if ( _States_Is_dormant( the_thread->current_state ) ) { - - the_thread->Start.entry_point = entry_point; - the_thread->Start.initial_argument = argument; - - _Thread_Load_environment( the_thread ); - - _Thread_Ready( the_thread ); - - _User_extensions_Task_start( the_thread ); - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INCORRECT_STATE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_restart - * - * This directive readies the specified thread. It restores - * the thread environment to the original values established - * at thread creation and start time. A thread can be restarted - * from any state except the dormant state. - * - * Input parameters: - * id - thread id - * argument - thread argument - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_restart( - Objects_Id id, - unsigned32 argument -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - if ( !_States_Is_dormant( the_thread->current_state ) ) { - - _Thread_Set_transient( the_thread ); - _ASR_Initialize( &the_thread->Signal ); - the_thread->pending_events = EVENT_SETS_NONE_PENDING; - the_thread->resource_count = 0; - the_thread->current_modes = the_thread->Start.initial_modes; - the_thread->Start.initial_argument = argument; - - _RTEMS_tasks_Cancel_wait( the_thread ); - - if ( the_thread->current_priority != - the_thread->Start.initial_priority ) { - the_thread->real_priority = the_thread->Start.initial_priority; - _Thread_Set_priority( the_thread, - the_thread->Start.initial_priority ); - } - - _Thread_Load_environment( the_thread ); - - _Thread_Ready( the_thread ); - - _User_extensions_Task_restart( the_thread ); - - if ( _Thread_Is_executing ( the_thread ) ) - _Thread_Restart_self(); - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INCORRECT_STATE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_delete - * - * This directive allows a thread to delete itself or the thread - * identified in the id field. The executive halts execution - * of the thread and frees the thread control block. - * - * Input parameters: - * id - thread id - * - * Output parameters: - * nothing - if id is the requesting thread (always succeeds) - * RTEMS_SUCCESSFUL - if successful and id is - * not the requesting thread - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_delete( - Objects_Id id -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Dispatch(); - return( RTEMS_ILLEGAL_ON_REMOTE_OBJECT ); - case OBJECTS_LOCAL: - _Objects_Close( &_Thread_Information, &the_thread->Object ); - - _Thread_Set_state( the_thread, STATES_TRANSIENT ); - - _User_extensions_Task_delete( the_thread ); - -#if ( CPU_USE_DEFERRED_FP_SWITCH == TRUE ) - if ( _Thread_Is_allocated_fp( the_thread ) ) - _Thread_Deallocate_fp(); -#endif - the_thread->fp_context = NULL; - - _RTEMS_tasks_Cancel_wait( the_thread ); - - (void) _Workspace_Free( the_thread->Start.Initial_stack.area ); - - _RTEMS_tasks_Free( the_thread ); - - if ( _Attributes_Is_global( the_thread->attribute_set ) ) { - - _Objects_MP_Close( &_Thread_Information, the_thread->Object.id ); - - _RTEMS_tasks_MP_Send_process_packet( - RTEMS_TASKS_MP_ANNOUNCE_DELETE, - the_thread->Object.id, - 0 /* Not used */ - ); - } - - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_suspend - * - * This directive will place the specified thread in the "suspended" - * state. Note that the suspended state can be in addition to - * other waiting states. - * - * Input parameters: - * id - thread id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_suspend( - Objects_Id id -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return( - _RTEMS_tasks_MP_Send_request_packet( - RTEMS_TASKS_MP_SUSPEND_REQUEST, - id, - 0, /* Not used */ - 0, /* Not used */ - 0 /* Not used */ - ) - ); - case OBJECTS_LOCAL: - if ( !_States_Is_suspended( the_thread->current_state ) ) { - _Thread_Set_state( the_thread, STATES_SUSPENDED ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_ALREADY_SUSPENDED ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_resume - * - * This directive will remove the specified thread - * from the suspended state. - * - * Input parameters: - * id - thread id - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_resume( - Objects_Id id -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return( - _RTEMS_tasks_MP_Send_request_packet( - RTEMS_TASKS_MP_RESUME_REQUEST, - id, - 0, /* Not used */ - 0, /* Not used */ - 0 /* Not used */ - ) - ); - case OBJECTS_LOCAL: - if ( _States_Is_suspended( the_thread->current_state ) ) { - _Thread_Resume( the_thread ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - _Thread_Enable_dispatch(); - return( RTEMS_INCORRECT_STATE ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_set_priority - * - * This directive changes the priority of the specified thread. - * The specified thread can be any thread in the system including - * the requesting thread. - * - * Input parameters: - * id - thread id (0 indicates requesting thread) - * new_priority - thread priority (0 indicates current priority) - * old_priority - pointer to previous priority - * - * Output parameters: - * old_priority - previous priority - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_set_priority( - Objects_Id id, - rtems_task_priority new_priority, - rtems_task_priority *old_priority -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - if ( new_priority != RTEMS_CURRENT_PRIORITY && - !_Priority_Is_valid( new_priority ) ) - return( RTEMS_INVALID_PRIORITY ); - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = old_priority; - return( - _RTEMS_tasks_MP_Send_request_packet( - RTEMS_TASKS_MP_SET_PRIORITY_REQUEST, - id, - new_priority, - 0, /* Not used */ - 0 /* Not used */ - ) - ); - case OBJECTS_LOCAL: - *old_priority = the_thread->current_priority; - if ( new_priority != RTEMS_CURRENT_PRIORITY ) { - the_thread->real_priority = new_priority; - if ( the_thread->resource_count == 0 || - the_thread->current_priority > new_priority ) - _Thread_Change_priority( the_thread, new_priority ); - } - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_mode - * - * This directive enables and disables several modes of - * execution for the requesting thread. - * - * Input parameters: - * mode_set - new mode - * mask - mask - * previous_mode_set - address of previous mode set - * - * Output: - * *previous_mode_set - previous mode set - * always returns RTEMS_SUCCESSFUL - */ - -rtems_status_code rtems_task_mode( - rtems_mode mode_set, - rtems_mode mask, - rtems_mode *previous_mode_set -) -{ - if ( _Thread_Change_mode( mode_set, mask, previous_mode_set ) ) - _Thread_Dispatch(); - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_task_get_note - * - * This directive obtains the note from the specified notepad - * of the specified thread. - * - * Input parameters: - * id - thread id - * notepad - notepad number - * note - pointer to note - * - * Output parameters: - * note - filled in if successful - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_get_note( - Objects_Id id, - unsigned32 notepad, - unsigned32 *note -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - /* - * NOTE: There is no check for < RTEMS_NOTEPAD_FIRST because that would - * be checking an unsigned number for being negative. - */ - - if ( notepad > RTEMS_NOTEPAD_LAST ) - return( RTEMS_INVALID_NUMBER ); - - /* - * Optimize the most likely case to avoid the Thread_Dispatch. - */ - - if ( _Objects_Are_ids_equal( id, OBJECTS_ID_OF_SELF ) || - _Objects_Are_ids_equal( id, _Thread_Executing->Object.id ) ) { - *note = _Thread_Executing->Notepads[ notepad ]; - return( RTEMS_SUCCESSFUL ); - } - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - _Thread_Executing->Wait.return_argument = note; - - return _RTEMS_tasks_MP_Send_request_packet( - RTEMS_TASKS_MP_GET_NOTE_REQUEST, - id, - 0, /* Not used */ - notepad, - 0 /* Not used */ - ); - case OBJECTS_LOCAL: - *note= the_thread->Notepads[ notepad ]; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_set_note - * - * This directive sets the specified notepad contents to the given - * note. - * - * Input parameters: - * id - thread id - * notepad - notepad number - * note - note value - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_set_note( - Objects_Id id, - unsigned32 notepad, - unsigned32 note -) -{ - register Thread_Control *the_thread; - Objects_Locations location; - - /* - * NOTE: There is no check for < RTEMS_NOTEPAD_FIRST because that would - * be checking an unsigned number for being negative. - */ - - if ( notepad > RTEMS_NOTEPAD_LAST ) - return( RTEMS_INVALID_NUMBER ); - - /* - * Optimize the most likely case to avoid the Thread_Dispatch. - */ - - if ( _Objects_Are_ids_equal( id, OBJECTS_ID_OF_SELF ) || - _Objects_Are_ids_equal( id, _Thread_Executing->Object.id ) ) { - _Thread_Executing->Notepads[ notepad ] = note; - return( RTEMS_SUCCESSFUL ); - } - - the_thread = _Thread_Get( id, &location ); - switch ( location ) { - case OBJECTS_ERROR: - return( RTEMS_INVALID_ID ); - case OBJECTS_REMOTE: - return _RTEMS_tasks_MP_Send_request_packet( - RTEMS_TASKS_MP_SET_NOTE_REQUEST, - id, - 0, /* Not used */ - notepad, - note - ); - - case OBJECTS_LOCAL: - the_thread->Notepads[ notepad ] = note; - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); - } - - return( RTEMS_INTERNAL_ERROR ); /* unreached - only to remove warnings */ -} - -/*PAGE - * - * rtems_task_wake_after - * - * This directive suspends the requesting thread for the given amount - * of ticks. - * - * Input parameters: - * ticks - number of ticks to wait - * - * Output parameters: - * RTEMS_SUCCESSFUL - always successful - */ - -rtems_status_code rtems_task_wake_after( - rtems_interval ticks -) -{ - if ( ticks == 0 ) { - _Thread_Yield_processor(); - _Thread_Dispatch(); - } else { - _Thread_Disable_dispatch(); - _Thread_Set_state( _Thread_Executing, STATES_DELAYING ); - _Watchdog_Initialize( - &_Thread_Executing->Timer, - _Thread_Delay_ended, - _Thread_Executing->Object.id, - NULL - ); - _Watchdog_Insert_ticks( &_Thread_Executing->Timer, - ticks, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - } - return( RTEMS_SUCCESSFUL ); -} - -/*PAGE - * - * rtems_task_wake_when - * - * This directive blocks the requesting thread until the given date and - * time is reached. - * - * Input parameters: - * time_buffer - pointer to the time and date structure - * - * Output parameters: - * RTEMS_SUCCESSFUL - if successful - * error code - if unsuccessful - */ - -rtems_status_code rtems_task_wake_when( -rtems_time_of_day *time_buffer -) -{ - rtems_interval seconds; - rtems_status_code local_result; - - if ( !_TOD_Is_set() ) - return( RTEMS_NOT_DEFINED ); - - time_buffer->ticks = 0; - - local_result = _TOD_Validate( time_buffer ); - - if ( !rtems_is_status_successful( local_result ) ) - return( local_result ); - - seconds = _TOD_To_seconds( time_buffer ); - - if ( seconds <= _TOD_Seconds_since_epoch ) - return( RTEMS_INVALID_CLOCK ); - - _Thread_Disable_dispatch(); - _Thread_Set_state( _Thread_Executing, STATES_WAITING_FOR_TIME ); - _Watchdog_Initialize( - &_Thread_Executing->Timer, - _Thread_Delay_ended, - _Thread_Executing->Object.id, - NULL - ); - _Watchdog_Insert_seconds( &_Thread_Executing->Timer, - seconds - _TOD_Seconds_since_epoch, WATCHDOG_ACTIVATE_NOW ); - _Thread_Enable_dispatch(); - return( RTEMS_SUCCESSFUL ); -} |