diff options
Diffstat (limited to 'contrib')
-rw-r--r-- | contrib/crossrpms/patches/gcc-core-4.4.2-rtems4.10-20091015.diff | 24280 |
1 files changed, 56 insertions, 24224 deletions
diff --git a/contrib/crossrpms/patches/gcc-core-4.4.2-rtems4.10-20091015.diff b/contrib/crossrpms/patches/gcc-core-4.4.2-rtems4.10-20091015.diff index 5bf09dc051..03af678728 100644 --- a/contrib/crossrpms/patches/gcc-core-4.4.2-rtems4.10-20091015.diff +++ b/contrib/crossrpms/patches/gcc-core-4.4.2-rtems4.10-20091015.diff @@ -1,6 +1,6 @@ -diff -Naur gcc-4.4.2.orig/configure gcc-4.4.2-rtems4.10-20091015/configure +diff -Naur gcc-4.4.2.orig/configure gcc-4.4.2/configure --- gcc-4.4.2.orig/configure 2009-04-25 06:10:29.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/configure 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/configure 2009-10-15 18:36:00.000000000 +0200 @@ -2267,6 +2267,7 @@ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap" ;; @@ -18,9 +18,9 @@ diff -Naur gcc-4.4.2.orig/configure gcc-4.4.2-rtems4.10-20091015/configure # Someone might think of using the pre-installed headers on # Canadian crosses, in case the installed compiler is not fully -diff -Naur gcc-4.4.2.orig/configure.ac gcc-4.4.2-rtems4.10-20091015/configure.ac +diff -Naur gcc-4.4.2.orig/configure.ac gcc-4.4.2/configure.ac --- gcc-4.4.2.orig/configure.ac 2009-04-25 06:10:29.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/configure.ac 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/configure.ac 2009-10-15 18:36:00.000000000 +0200 @@ -502,6 +502,7 @@ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap" ;; @@ -38,18 +38,18 @@ diff -Naur gcc-4.4.2.orig/configure.ac gcc-4.4.2-rtems4.10-20091015/configure.ac # Someone might think of using the pre-installed headers on # Canadian crosses, in case the installed compiler is not fully -diff -Naur gcc-4.4.2.orig/gcc/config/avr/t-rtems gcc-4.4.2-rtems4.10-20091015/gcc/config/avr/t-rtems +diff -Naur gcc-4.4.2.orig/gcc/config/avr/t-rtems gcc-4.4.2/gcc/config/avr/t-rtems --- gcc-4.4.2.orig/gcc/config/avr/t-rtems 2004-11-23 04:44:03.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/avr/t-rtems 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/avr/t-rtems 2009-10-15 18:36:00.000000000 +0200 @@ -1,3 +1,4 @@ # Multilibs for avr RTEMS targets. -# ATM, this is just a stub +# RTEMS uses _exit from newlib +LIB1ASMFUNCS := $(filter-out _exit,$(LIB1ASMFUNCS)) -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/arithmetic.c gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/arithmetic.c +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/arithmetic.c gcc-4.4.2/gcc/config/lm32/arithmetic.c --- gcc-4.4.2.orig/gcc/config/lm32/arithmetic.c 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/arithmetic.c 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/arithmetic.c 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,305 @@ +/* Fixed-point arithmetic for Lattice Mico32. + Contributed by Jon Beniston <jon@beniston.com> @@ -356,9 +356,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/arithmetic.c gcc-4.4.2-rtems4.10-20091 +#endif + +#endif -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crti.S gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/crti.S +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crti.S gcc-4.4.2/gcc/config/lm32/crti.S --- gcc-4.4.2.orig/gcc/config/lm32/crti.S 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/crti.S 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/crti.S 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,45 @@ +# crti.S for Lattice Mico32 +# Contributed by Jon Beniston <jon@beniston.com> @@ -405,9 +405,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crti.S gcc-4.4.2-rtems4.10-20091015/gc +_fini: + addi sp, sp, -4 + sw (sp+4), ra -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crtn.S gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/crtn.S +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crtn.S gcc-4.4.2/gcc/config/lm32/crtn.S --- gcc-4.4.2.orig/gcc/config/lm32/crtn.S 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/crtn.S 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/crtn.S 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,42 @@ +# crtn.S for Lattice Mico32 +# Contributed by Jon Beniston <jon@beniston.com> @@ -451,9 +451,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/crtn.S gcc-4.4.2-rtems4.10-20091015/gc + addi sp, sp, 4 + ret + -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lib1funcs.S gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lib1funcs.S +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lib1funcs.S gcc-4.4.2/gcc/config/lm32/lib1funcs.S --- gcc-4.4.2.orig/gcc/config/lm32/lib1funcs.S 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lib1funcs.S 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lib1funcs.S 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,429 @@ +# lib1funcs.S for Lattice Mico32 +# Contributed by Jon Beniston <jon@beniston.com> @@ -884,9 +884,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lib1funcs.S gcc-4.4.2-rtems4.10-200910 + .word __ashrsi3_30 + .word __ashrsi3_31 + -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.c gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.c +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.c gcc-4.4.2/gcc/config/lm32/lm32.c --- gcc-4.4.2.orig/gcc/config/lm32/lm32.c 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.c 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lm32.c 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,869 @@ +/* Subroutines used for code generation on the Lattice Mico32 architecture. + Contributed by Jon Beniston <jon@beniston.com> @@ -1757,9 +1757,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.c gcc-4.4.2-rtems4.10-20091015/gc + + return 0; +} -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.h gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.h +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.h gcc-4.4.2/gcc/config/lm32/lm32.h --- gcc-4.4.2.orig/gcc/config/lm32/lm32.h 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lm32.h 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,657 @@ +/* Definitions of target machine for GNU compiler, Lattice Mico32 architecture. + Contributed by Jon Beniston <jon@beniston.com> @@ -2418,9 +2418,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.h gcc-4.4.2-rtems4.10-20091015/gc +#endif + +#define STORE_FLAG_VALUE 1 -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.md gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.md +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.md gcc-4.4.2/gcc/config/lm32/lm32.md --- gcc-4.4.2.orig/gcc/config/lm32/lm32.md 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.md 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lm32.md 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,1233 @@ +;; Machine description of the Lattice Mico32 architecture for GNU C compiler. +;; Contributed by Jon Beniston <jon@beniston.com> @@ -3655,9 +3655,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.md gcc-4.4.2-rtems4.10-20091015/g + [(set_attr "length" "0")] +) + -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.opt gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.opt +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.opt gcc-4.4.2/gcc/config/lm32/lm32.opt --- gcc-4.4.2.orig/gcc/config/lm32/lm32.opt 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32.opt 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lm32.opt 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,40 @@ +; Options for the Lattice Mico32 port of the compiler. +; Contributed by Jon Beniston <jon@beniston.com> @@ -3699,9 +3699,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32.opt gcc-4.4.2-rtems4.10-20091015/ +muser-enabled +Target Report Mask(USER_ENABLED) +Enable user-defined instructions -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32-protos.h gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32-protos.h +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32-protos.h gcc-4.4.2/gcc/config/lm32/lm32-protos.h --- gcc-4.4.2.orig/gcc/config/lm32/lm32-protos.h 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/lm32-protos.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/lm32-protos.h 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,52 @@ +/* Prototypes of target machine functions, Lattice Mico32 architecture. + Contributed by Jon Beniston <jon@beniston.com> @@ -3755,9 +3755,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/lm32-protos.h gcc-4.4.2-rtems4.10-2009 +extern int lm32_expand_block_move (rtx *); +extern int nonpic_symbol_mentioned_p (rtx); +extern rtx lm32_legitimize_pic_address (rtx, enum machine_mode, rtx); -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/predicates.md gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/predicates.md +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/predicates.md gcc-4.4.2/gcc/config/lm32/predicates.md --- gcc-4.4.2.orig/gcc/config/lm32/predicates.md 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/predicates.md 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/predicates.md 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,58 @@ +;; Predicate definitions for Lattice Mico32. +;; Contributed by Jon Beniston <jon@beniston.com> @@ -3817,9 +3817,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/predicates.md gcc-4.4.2-rtems4.10-2009 + (ior (match_code "label_ref") + (match_code "symbol_ref"))) + -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/rtems.h gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/rtems.h +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/rtems.h gcc-4.4.2/gcc/config/lm32/rtems.h --- gcc-4.4.2.orig/gcc/config/lm32/rtems.h 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/rtems.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/rtems.h 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,32 @@ +/* Definitions for rtems targeting a lm32 using ELF. + Copyright (C) 2009, Free Software Foundation, Inc. @@ -3853,9 +3853,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/rtems.h gcc-4.4.2-rtems4.10-20091015/g + +/* Use the default */ +#undef LINK_GCC_C_SEQUENCE_SPEC -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/sfp-machine.h gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/sfp-machine.h +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/sfp-machine.h gcc-4.4.2/gcc/config/lm32/sfp-machine.h --- gcc-4.4.2.orig/gcc/config/lm32/sfp-machine.h 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/sfp-machine.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/sfp-machine.h 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,51 @@ +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long @@ -3908,18 +3908,18 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/sfp-machine.h gcc-4.4.2-rtems4.10-2009 +# define strong_alias(name, aliasname) _strong_alias(name, aliasname) +# define _strong_alias(name, aliasname) \ + extern __typeof (name) aliasname __attribute__ ((alias (#name))); -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/t-fprules-softfp gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/t-fprules-softfp +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/t-fprules-softfp gcc-4.4.2/gcc/config/lm32/t-fprules-softfp --- gcc-4.4.2.orig/gcc/config/lm32/t-fprules-softfp 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/t-fprules-softfp 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/t-fprules-softfp 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,5 @@ +softfp_float_modes := sf df +softfp_int_modes := si di +softfp_extensions := sfdf +softfp_truncations := dfsf +softfp_machine_header := lm32/sfp-machine.h -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/t-lm32 gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/t-lm32 +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/t-lm32 gcc-4.4.2/gcc/config/lm32/t-lm32 --- gcc-4.4.2.orig/gcc/config/lm32/t-lm32 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/t-lm32 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/t-lm32 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,19 @@ +LIB1ASMSRC = lm32/lib1funcs.S +LIB1ASMFUNCS = _ashlsi3 _ashrsi3 _lshrsi3 @@ -3940,9 +3940,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/t-lm32 gcc-4.4.2-rtems4.10-20091015/gc + +MULTILIB_OPTIONS = mmultiply-enabled mbarrel-shift-enabled +# Don't bother building multilib with mdivide-enabled, not much of a gain -diff -Naur gcc-4.4.2.orig/gcc/config/lm32/uclinux-elf.h gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/uclinux-elf.h +diff -Naur gcc-4.4.2.orig/gcc/config/lm32/uclinux-elf.h gcc-4.4.2/gcc/config/lm32/uclinux-elf.h --- gcc-4.4.2.orig/gcc/config/lm32/uclinux-elf.h 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/lm32/uclinux-elf.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/lm32/uclinux-elf.h 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,85 @@ +/* Definitions for LM32 running Linux-based GNU systems using ELF + Copyright (C) 1993, 1994, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, @@ -4029,9 +4029,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/lm32/uclinux-elf.h gcc-4.4.2-rtems4.10-2009 +#undef CC1_SPEC +#define CC1_SPEC "%{G*} %{!fno-PIC:-fPIC}" + -diff -Naur gcc-4.4.2.orig/gcc/config/mips/elf.h gcc-4.4.2-rtems4.10-20091015/gcc/config/mips/elf.h +diff -Naur gcc-4.4.2.orig/gcc/config/mips/elf.h gcc-4.4.2/gcc/config/mips/elf.h --- gcc-4.4.2.orig/gcc/config/mips/elf.h 2007-08-02 12:49:31.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/mips/elf.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/mips/elf.h 2009-10-15 18:36:00.000000000 +0200 @@ -48,6 +48,4 @@ #undef ENDFILE_SPEC #define ENDFILE_SPEC "crtend%O%s crtn%O%s" @@ -4039,9 +4039,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/mips/elf.h gcc-4.4.2-rtems4.10-20091015/gcc -#define NO_IMPLICIT_EXTERN_C 1 - #define HANDLE_PRAGMA_PACK_PUSH_POP 1 -diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/rtems.h gcc-4.4.2-rtems4.10-20091015/gcc/config/rs6000/rtems.h +diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/rtems.h gcc-4.4.2/gcc/config/rs6000/rtems.h --- gcc-4.4.2.orig/gcc/config/rs6000/rtems.h 2007-08-02 12:49:31.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/rs6000/rtems.h 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/rs6000/rtems.h 2009-10-15 18:36:00.000000000 +0200 @@ -49,8 +49,18 @@ %{mcpu=604: %{!Dppc*: %{!Dmpc*: -Dmpc604} } } \ %{mcpu=750: %{!Dppc*: %{!Dmpc*: -Dmpc750} } } \ @@ -4062,9 +4062,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/rtems.h gcc-4.4.2-rtems4.10-20091015 + rs6000_float_gprs = 1; \ + } \ + } while(0) -diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/t-rtems gcc-4.4.2-rtems4.10-20091015/gcc/config/rs6000/t-rtems +diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/t-rtems gcc-4.4.2/gcc/config/rs6000/t-rtems --- gcc-4.4.2.orig/gcc/config/rs6000/t-rtems 2009-03-25 13:54:16.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config/rs6000/t-rtems 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config/rs6000/t-rtems 2009-10-15 18:36:00.000000000 +0200 @@ -1,12 +1,12 @@ # Multilibs for powerpc RTEMS targets. @@ -4096,9 +4096,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config/rs6000/t-rtems gcc-4.4.2-rtems4.10-20091015 MULTILIB_EXCEPTIONS += *mcpu=860/Dmpc* MULTILIB_EXCEPTIONS += *mcpu=7400/Dmpc* +MULTILIB_EXCEPTIONS += *mcpu=8540/Dmpc* -diff -Naur gcc-4.4.2.orig/gcc/config.gcc gcc-4.4.2-rtems4.10-20091015/gcc/config.gcc +diff -Naur gcc-4.4.2.orig/gcc/config.gcc gcc-4.4.2/gcc/config.gcc --- gcc-4.4.2.orig/gcc/config.gcc 2009-09-13 15:01:13.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config.gcc 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/config.gcc 2009-10-15 18:36:00.000000000 +0200 @@ -1364,6 +1364,23 @@ out_file=iq2000/iq2000.c md_file=iq2000/iq2000.md @@ -4123,3196 +4123,9 @@ diff -Naur gcc-4.4.2.orig/gcc/config.gcc gcc-4.4.2-rtems4.10-20091015/gcc/config m32r-*-elf*) tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" extra_parts="crtinit.o crtfini.o" -diff -Naur gcc-4.4.2.orig/gcc/config.gcc.orig gcc-4.4.2-rtems4.10-20091015/gcc/config.gcc.orig ---- gcc-4.4.2.orig/gcc/config.gcc.orig 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/config.gcc.orig 2009-10-15 18:36:00.000000000 +0200 -@@ -0,0 +1,3183 @@ -+# GCC target-specific configuration file. -+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, -+# 2008, 2009 Free Software Foundation, Inc. -+ -+#This file is part of GCC. -+ -+#GCC is free software; you can redistribute it and/or modify it under -+#the terms of the GNU General Public License as published by the Free -+#Software Foundation; either version 3, or (at your option) any later -+#version. -+ -+#GCC is distributed in the hope that it will be useful, but WITHOUT -+#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+#for more details. -+ -+#You should have received a copy of the GNU General Public License -+#along with GCC; see the file COPYING3. If not see -+#<http://www.gnu.org/licenses/>. -+ -+# This is the GCC target-specific configuration file -+# where a configuration type is mapped to different system-specific -+# definitions and files. This is invoked by the autoconf-generated -+# configure script. Putting it in a separate shell file lets us skip -+# running autoconf when modifying target-specific information. -+ -+# When you change the cases in the OS or target switches, consider -+# updating ../libgcc/config.host also. -+ -+# This file switches on the shell variable ${target}, and also uses the -+# following shell variables: -+# -+# with_* Various variables as set by configure. -+# -+# enable_threads Either the name, yes or no depending on whether -+# threads support was requested. -+# -+# default_use_cxa_atexit -+# The default value for the $enable___cxa_atexit -+# variable. enable___cxa_atexit needs to be set to -+# "yes" for the correct operation of C++ destructors -+# but it relies upon the presence of a non-standard C -+# library function called __cxa_atexit. -+# Since not all C libraries provide __cxa_atexit the -+# default value of $default_use_cxa_atexit is set to -+# "no" except for targets which are known to be OK. -+# -+# gas_flag Either yes or no depending on whether GNU as was -+# requested. -+# -+# gnu_ld_flag Either yes or no depending on whether GNU ld was -+# requested. -+ -+# This file sets the following shell variables for use by the -+# autoconf-generated configure script: -+# -+# cpu_type The name of the cpu, if different from the first -+# chunk of the canonical target name. -+# -+# tm_defines List of target macros to define for all compilations. -+# -+# tm_file A list of target macro files, if different from -+# "$cpu_type/$cpu_type.h". Usually it's constructed -+# per target in a way like this: -+# tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h" -+# Note that the preferred order is: -+# - specific target header "${cpu_type}/${cpu_type.h}" -+# - generic headers like dbxelf.h elfos.h, etc. -+# - specializing target headers like ${cpu_type.h}/elf.h -+# This helps to keep OS specific stuff out of the CPU -+# defining header ${cpu_type}/${cpu_type.h}. -+# -+# It is possible to include automatically-generated -+# build-directory files by prefixing them with "./". -+# All other files should relative to $srcdir/config. -+# -+# tm_p_file Location of file with declarations for functions -+# in $out_file. -+# -+# out_file The name of the machine description C support -+# file, if different from "$cpu_type/$cpu_type.c". -+# -+# md_file The name of the machine-description file, if -+# different from "$cpu_type/$cpu_type.md". -+# -+# tmake_file A list of machine-description-specific -+# makefile-fragments, if different from -+# "$cpu_type/t-$cpu_type". -+# -+# extra_modes The name of the file containing a list of extra -+# machine modes, if necessary and different from -+# "$cpu_type/$cpu_type-modes.def". -+# -+# extra_objs List of extra objects that should be linked into -+# the compiler proper (cc1, cc1obj, cc1plus) -+# depending on target. -+# -+# extra_gcc_objs List of extra objects that should be linked into -+# the compiler driver (gcc) depending on target. -+# -+# extra_headers List of used header files from the directory -+# config/${cpu_type}. -+# -+# use_gcc_tgmath If set, add tgmath.h to the list of used header -+# files. -+# -+# extra_passes List of extra executables compiled for this target -+# machine, used for compiling from source to object. -+# -+# extra_parts List of extra object files that should be compiled -+# for this target machine. -+# -+# extra_programs Like extra_passes, but these are used when linking. -+# -+# extra_options List of target-dependent .opt files. -+# -+# c_target_objs List of extra target-dependent objects that be -+# linked into the C compiler only. -+# -+# cxx_target_objs List of extra target-dependent objects that be -+# linked into the C++ compiler only. -+# -+# fortran_target_objs List of extra target-dependent objects that be -+# linked into the fortran compiler only. -+# -+# target_gtfiles List of extra source files with type information. -+# -+# xm_defines List of macros to define when compiling for the -+# target machine. -+# -+# xm_file List of files to include when compiling for the -+# target machine. -+# -+# use_collect2 Set to yes or no, depending on whether collect2 -+# will be used. -+# -+# target_cpu_default Set to override the default target model. -+# -+# gdb_needs_out_file_path -+# Set to yes if gdb needs a dir command with -+# `dirname $out_file`. -+# -+# thread_file Set to control which thread package to use. -+# -+# gas Set to yes or no depending on whether the target -+# system normally uses GNU as. -+# -+# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide -+# for this target. This is true if this target -+# supports "long" or "wchar_t" wider than 32 bits, -+# or BITS_PER_WORD is wider than 32 bits. -+# The setting made here must match the one made in -+# other locations such as libcpp/configure.ac -+# -+# configure_default_options -+# Set to an initializer for configure_default_options -+# in configargs.h, based on --with-cpu et cetera. -+# -+# use_fixproto Set to "yes" if fixproto should be run normally, -+# "no" if fixproto should never be run. -+ -+# The following variables are used in each case-construct to build up the -+# outgoing variables: -+# -+# gnu_ld Set to yes or no depending on whether the target -+# system normally uses GNU ld. -+ -+out_file= -+tmake_file= -+extra_headers= -+use_gcc_tgmath=yes -+extra_passes= -+extra_parts= -+extra_programs= -+extra_objs= -+extra_gcc_objs= -+extra_options= -+c_target_objs= -+cxx_target_objs= -+fortran_target_objs= -+tm_defines= -+xm_defines= -+# Set this to force installation and use of collect2. -+use_collect2= -+# Set this to override the default target model. -+target_cpu_default= -+# Set this if gdb needs a dir command with `dirname $out_file` -+gdb_needs_out_file_path= -+# Set this to control which thread package will be used. -+thread_file= -+# Reinitialize these from the flag values every loop pass, since some -+# configure entries modify them. -+gas="$gas_flag" -+gnu_ld="$gnu_ld_flag" -+default_use_cxa_atexit=no -+target_gtfiles= -+need_64bit_hwint= -+ -+# Default to not using fixproto. Targets which need fixproto should -+# specifically set this to 'yes'. -+use_fixproto=no -+ -+# Don't carry these over build->host->target. Please. -+xm_file= -+md_file= -+ -+# Obsolete configurations. -+case ${target} in -+# Avoid generic cases below matching. -+ h8300-*-rtems* | h8300-*-elf* \ -+ | sh-*-elf* | sh-*-symbianelf* | sh-*-linux* | sh-*-netbsdelf* \ -+ | sh-*-rtems* | sh-wrs-vxworks) ;; -+ arm-*-coff* \ -+ | armel-*-coff* \ -+ | h8300-*-* \ -+ | i[34567]86-*-aout* \ -+ | i[34567]86-*-coff* \ -+ | m68k-*-aout* \ -+ | m68k-*-coff* \ -+ | sh-*-* \ -+ | pdp11-*-bsd \ -+ | rs6000-ibm-aix4.[12]* \ -+ | powerpc-ibm-aix4.[12]* \ -+ ) -+ if test "x$enable_obsolete" != xyes; then -+ echo "*** Configuration ${target} is obsolete." >&2 -+ echo "*** Specify --enable-obsolete to build it anyway." >&2 -+ echo "*** Support will be REMOVED in the next major release of GCC," >&2 -+ echo "*** unless a maintainer comes forward." >&2 -+ exit 1 -+ fi;; -+esac -+ -+# Unsupported targets list. Do not put an entry in this list unless -+# it would otherwise be caught by a more permissive pattern. The list -+# should be in alphabetical order. -+case ${target} in -+ i[34567]86-go32-* \ -+ | i[34567]86-*-go32* \ -+ | mips64orion*-*-rtems* \ -+ | sparc-hal-solaris2* \ -+ | thumb-*-* \ -+ | *-*-linux*aout* \ -+ | *-*-linux*coff* \ -+ | *-*-linux*libc1* \ -+ | *-*-linux*oldld* \ -+ | *-*-rtemsaout* \ -+ | *-*-rtemscoff* \ -+ | *-*-solaris2.[0-6] \ -+ | *-*-solaris2.[0-6].* \ -+ | *-*-sysv* \ -+ | vax-*-vms* \ -+ ) -+ echo "*** Configuration ${target} not supported" 1>&2 -+ exit 1 -+ ;; -+esac -+ -+# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be -+# updated in each machine entry. Also set default extra_headers for some -+# machines. -+tm_p_file= -+cpu_type=`echo ${target} | sed 's/-.*$//'` -+cpu_is_64bit= -+case ${target} in -+m32c*-*-*) -+ cpu_type=m32c -+ tmake_file=m32c/t-m32c -+ ;; -+alpha*-*-*) -+ cpu_type=alpha -+ need_64bit_hwint=yes -+ ;; -+am33_2.0-*-linux*) -+ cpu_type=mn10300 -+ ;; -+arm*-*-*) -+ cpu_type=arm -+ extra_headers="mmintrin.h arm_neon.h" -+ c_target_objs="arm-c.o" -+ cxx_target_objs="arm-c.o" -+ ;; -+bfin*-*) -+ cpu_type=bfin -+ ;; -+crisv32-*) -+ cpu_type=cris -+ ;; -+frv*) cpu_type=frv -+ ;; -+fido-*-*) -+ cpu_type=m68k -+ extra_headers=math-68881.h -+ ;; -+i[34567]86-*-*) -+ cpu_type=i386 -+ c_target_objs="i386-c.o" -+ cxx_target_objs="i386-c.o" -+ extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h -+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h -+ nmmintrin.h bmmintrin.h mmintrin-common.h -+ wmmintrin.h immintrin.h x86intrin.h avxintrin.h -+ cross-stdarg.h" -+ ;; -+x86_64-*-*) -+ cpu_type=i386 -+ c_target_objs="i386-c.o" -+ cxx_target_objs="i386-c.o" -+ extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h -+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h -+ nmmintrin.h bmmintrin.h mmintrin-common.h -+ wmmintrin.h immintrin.h x86intrin.h avxintrin.h -+ cross-stdarg.h" -+ need_64bit_hwint=yes -+ ;; -+ia64-*-*) -+ extra_headers=ia64intrin.h -+ need_64bit_hwint=yes -+ ;; -+hppa*-*-*) -+ cpu_type=pa -+ ;; -+m32r*-*-*) -+ cpu_type=m32r -+ ;; -+m68k-*-*) -+ extra_headers=math-68881.h -+ ;; -+mips*-*-*) -+ cpu_type=mips -+ need_64bit_hwint=yes -+ extra_headers="loongson.h" -+ ;; -+picochip-*-*) -+ cpu_type=picochip -+ ;; -+powerpc*-*-*) -+ cpu_type=rs6000 -+ extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h" -+ need_64bit_hwint=yes -+ case x$with_cpu in -+ xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell) -+ cpu_is_64bit=yes -+ ;; -+ esac -+ ;; -+rs6000*-*-*) -+ need_64bit_hwint=yes -+ ;; -+score*-*-*) -+ cpu_type=score -+ ;; -+sparc*-*-*) -+ cpu_type=sparc -+ need_64bit_hwint=yes -+ ;; -+spu*-*-*) -+ cpu_type=spu -+ need_64bit_hwint=yes -+ ;; -+s390*-*-*) -+ cpu_type=s390 -+ need_64bit_hwint=yes -+ ;; -+# Note the 'l'; we need to be able to match e.g. "shle" or "shl". -+sh[123456789lbe]*-*-* | sh-*-*) -+ cpu_type=sh -+ need_64bit_hwint=yes -+ ;; -+esac -+ -+tm_file=${cpu_type}/${cpu_type}.h -+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h -+then -+ tm_p_file=${cpu_type}/${cpu_type}-protos.h -+fi -+extra_modes= -+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def -+then -+ extra_modes=${cpu_type}/${cpu_type}-modes.def -+fi -+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt -+then -+ extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" -+fi -+ -+case ${target} in -+i[34567]86-*-*) -+ if test "x$enable_cld" = xyes; then -+ tm_defines="${tm_defines} USE_IX86_CLD=1" -+ fi -+ ;; -+x86_64-*-*) -+ tm_file="i386/biarch64.h ${tm_file}" -+ if test "x$enable_cld" = xyes; then -+ tm_defines="${tm_defines} USE_IX86_CLD=1" -+ fi -+ ;; -+esac -+ -+# On a.out targets, we need to use collect2. -+case ${target} in -+*-*-*aout*) -+ use_collect2=yes -+ ;; -+esac -+ -+# Common parts for widely ported systems. -+case ${target} in -+*-*-darwin*) -+ tm_file="${tm_file} darwin.h" -+ case ${target} in -+ *-*-darwin[912]*) -+ tm_file="${tm_file} darwin9.h" -+ ;; -+ esac -+ tm_file="${tm_file} ${cpu_type}/darwin.h" -+ tm_p_file="${tm_p_file} darwin-protos.h" -+ tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin" -+ target_gtfiles="\$(srcdir)/config/darwin.c" -+ extra_options="${extra_options} darwin.opt" -+ c_target_objs="${c_target_objs} darwin-c.o" -+ cxx_target_objs="${cxx_target_objs} darwin-c.o" -+ fortran_target_objs="darwin-f.o" -+ extra_objs="darwin.o" -+ extra_gcc_objs="darwin-driver.o" -+ default_use_cxa_atexit=yes -+ case ${enable_threads} in -+ "" | yes | posix) thread_file='posix' ;; -+ esac -+ ;; -+*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) -+ # This is the place-holder for the generic a.out configuration -+ # of FreeBSD. No actual configuration resides here since -+ # there was only ever a bare-bones ix86 configuration for -+ # a.out and it exists solely in the machine-specific section. -+ # This place-holder must exist to avoid dropping into -+ # the generic ELF configuration of FreeBSD (i.e. it must be -+ # ordered before that section). -+ ;; -+*-*-freebsd*) -+ # This is the generic ELF configuration of FreeBSD. Later -+ # machine-specific sections may refine and add to this -+ # configuration. -+ # -+ # Due to tm_file entry ordering issues that vary between cpu -+ # architectures, we only define fbsd_tm_file to allow the -+ # machine-specific section to dictate the final order of all -+ # entries of tm_file with the minor exception that components -+ # of the tm_file set here will always be of the form: -+ # -+ # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h -+ # -+ # The machine-specific section should not tamper with this -+ # ordering but may order all other entries of tm_file as it -+ # pleases around the provided core setting. -+ gas=yes -+ gnu_ld=yes -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" -+ fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'` -+ tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}" -+ tmake_file="t-slibgcc-elf-ver t-freebsd" -+ case ${enable_threads} in -+ no) -+ fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" -+ ;; -+ "" | yes | posix) -+ thread_file='posix' -+ tmake_file="${tmake_file} t-freebsd-thread" -+ # Before 5.0, FreeBSD can't bind shared libraries to -lc -+ # when "optionally" threaded via weak pthread_* checks. -+ case ${target} in -+ *-*-freebsd[34] | *-*-freebsd[34].*) -+ tmake_file="${tmake_file} t-slibgcc-nolc-override" -+ ;; -+ esac -+ ;; -+ *) -+ echo 'Unknown thread configuration for FreeBSD' -+ exit 1 -+ ;; -+ esac -+ fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h" -+ ;; -+*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu) -+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" -+ gas=yes -+ gnu_ld=yes -+ case ${enable_threads} in -+ "" | yes | posix) thread_file='posix' ;; -+ esac -+ tmake_file="t-slibgcc-elf-ver t-linux" -+ case $target in -+ *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu) -+ :;; -+ *-*-gnu*) -+ tmake_file="$tmake_file t-gnu";; -+ esac -+ # glibc / uclibc switch. uclibc isn't usable for GNU/Hurd and neither for -+ # GNU/k*BSD. -+ case $target in -+ *linux*) -+ extra_options="$extra_options linux.opt";; -+ *) -+ tm_defines="$tm_defines OPTION_GLIBC=1";; -+ esac -+ case ${target} in -+ *-*-*uclibc*) -+ tm_defines="${tm_defines} UCLIBC_DEFAULT=1" -+ ;; -+ *) -+ tm_defines="${tm_defines} UCLIBC_DEFAULT=0" -+ ;; -+ esac -+ # Assume that glibc or uClibc are being used and so __cxa_atexit is provided. -+ default_use_cxa_atexit=yes -+ use_gcc_tgmath=no -+ ;; -+*-*-netbsd*) -+ tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic" -+ gas=yes -+ gnu_ld=yes -+ -+ # NetBSD 2.0 and later get POSIX threads enabled by default. -+ # Allow them to be explicitly enabled on any other version. -+ case ${enable_threads} in -+ "") -+ case ${target} in -+ *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) -+ thread_file='posix' -+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" -+ ;; -+ esac -+ ;; -+ yes | posix) -+ thread_file='posix' -+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" -+ ;; -+ esac -+ -+ # NetBSD 1.7 and later are set up to use GCC's crtstuff for -+ # ELF configurations. We will clear extra_parts in the -+ # a.out configurations. -+ case ${target} in -+ *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" -+ ;; -+ esac -+ -+ # NetBSD 2.0 and later provide __cxa_atexit(), which we use by -+ # default (unless overridden by --disable-__cxa_atexit). -+ case ${target} in -+ *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) -+ default_use_cxa_atexit=yes -+ ;; -+ esac -+ ;; -+*-*-openbsd*) -+ tmake_file="t-libc-ok t-openbsd t-libgcc-pic" -+ case ${enable_threads} in -+ yes) -+ thread_file='posix' -+ tmake_file="${tmake_file} t-openbsd-thread" -+ ;; -+ esac -+ case ${target} in -+ *-*-openbsd2.*|*-*-openbsd3.[012]) -+ tm_defines="${tm_defines} HAS_LIBC_R=1" ;; -+ esac -+ ;; -+*-*-rtems*) -+ case ${enable_threads} in -+ yes) thread_file='rtems' ;; -+ esac -+ ;; -+*-*-vxworks*) -+ tmake_file=t-vxworks -+ xm_defines=POSIX -+ extra_options="${extra_options} vxworks.opt" -+ extra_objs=vxworks.o -+ case ${enable_threads} in -+ no) ;; -+ "" | yes | vxworks) thread_file='vxworks' ;; -+ *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; -+ esac -+ ;; -+*-*-elf) -+ # Assume that newlib is being used and so __cxa_atexit is provided. -+ default_use_cxa_atexit=yes -+ ;; -+esac -+ -+case ${target} in -+# Support site-specific machine types. -+*local*) -+ rest=`echo ${target} | sed -e "s/$cpu_type-//"` -+ tm_file=${cpu_type}/$rest.h -+ if test -f $srcdir/config/${cpu_type}/xm-$rest.h -+ then xm_file=${cpu_type}/xm-$rest.h -+ fi -+ if test -f $srcdir/config/${cpu_type}/t-$rest -+ then tmake_file=${cpu_type}/t-$rest -+ fi -+ ;; -+alpha*-*-linux*) -+ tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" -+ target_cpu_default="MASK_GAS" -+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux" -+ ;; -+alpha*-*-gnu*) -+ tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h alpha/gnu.h" -+ target_cpu_default="MASK_GAS" -+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" -+ ;; -+alpha*-*-freebsd*) -+ tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" -+ target_cpu_default="MASK_GAS" -+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" -+ ;; -+alpha*-*-netbsd*) -+ tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" -+ target_cpu_default="MASK_GAS" -+ tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee" -+ ;; -+alpha*-*-openbsd*) -+ tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" -+ tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h" -+ # default x-alpha is only appropriate for dec-osf. -+ target_cpu_default="MASK_GAS" -+ tmake_file="alpha/t-alpha alpha/t-ieee" -+ ;; -+alpha*-dec-osf[45]*) -+ if test x$stabs = xyes -+ then -+ tm_file="${tm_file} dbx.h" -+ fi -+ if test x$gas != xyes -+ then -+ extra_passes="mips-tfile mips-tdump" -+ fi -+ use_collect2=yes -+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4" -+ tm_file="${tm_file} alpha/osf.h" -+ extra_headers=va_list.h -+ case ${target} in -+ *-*-osf4*) -+ # Define TARGET_SUPPORT_ARCH except on 4.0a. -+ case ${target} in -+ *-*-osf4.0a) ;; -+ *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" -+ esac -+ ;; -+ *-*-osf5*) -+ tm_file="${tm_file} alpha/osf5.h" -+ tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" -+ ;; -+ esac -+ case ${enable_threads} in -+ "" | yes | posix) -+ thread_file='posix' -+ tmake_file="${tmake_file} alpha/t-osf-pthread" -+ ;; -+ esac -+ ;; -+alpha64-dec-*vms*) -+ tm_file="${tm_file} alpha/vms.h alpha/vms64.h" -+ xm_file="alpha/xm-vms.h" -+ tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee" -+ prefix=/gnu -+ local_prefix=/gnu -+ ;; -+alpha*-dec-*vms*) -+ tm_file="${tm_file} alpha/vms.h" -+ xm_file=alpha/xm-vms.h -+ tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee" -+ prefix=/gnu -+ local_prefix=/gnu -+ ;; -+arc-*-elf*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ extra_parts="crtinit.o crtfini.o" -+ ;; -+arm-*-coff* | armel-*-coff*) -+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h" -+ tmake_file="arm/t-arm arm/t-arm-coff" -+ ;; -+arm-wrs-vxworks) -+ tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h" -+ tmake_file="${tmake_file} arm/t-arm arm/t-vxworks" -+ ;; -+arm*-*-freebsd*) -+ tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h" -+ tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf" -+ ;; -+arm*-*-netbsdelf*) -+ tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h" -+ tmake_file="${tmake_file} arm/t-arm arm/t-netbsd" -+ ;; -+arm*-*-netbsd*) -+ tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h" -+ tmake_file="t-netbsd arm/t-arm arm/t-netbsd" -+ extra_parts="" -+ use_collect2=yes -+ ;; -+arm*-*-linux*) # ARM GNU/Linux with ELF -+ tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" -+ case $target in -+ arm*b-*) -+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" -+ ;; -+ esac -+ tmake_file="${tmake_file} t-linux arm/t-arm" -+ case ${target} in -+ arm*-*-linux-*eabi) -+ tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h" -+ tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" -+ # The BPABI long long divmod functions return a 128-bit value in -+ # registers r0-r3. Correctly modeling that requires the use of -+ # TImode. -+ need_64bit_hwint=yes -+ # The EABI requires the use of __cxa_atexit. -+ default_use_cxa_atexit=yes -+ ;; -+ *) -+ tmake_file="$tmake_file arm/t-linux" -+ ;; -+ esac -+ tm_file="$tm_file arm/aout.h arm/arm.h" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-*-uclinux*) # ARM ucLinux -+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h" -+ tmake_file="arm/t-arm arm/t-arm-elf" -+ case ${target} in -+ arm*-*-uclinux*eabi) -+ tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h" -+ tmake_file="$tmake_file arm/t-bpabi" -+ # The BPABI long long divmod functions return a 128-bit value in -+ # registers r0-r3. Correctly modeling that requires the use of -+ # TImode. -+ need_64bit_hwint=yes -+ # The EABI requires the use of __cxa_atexit. -+ default_use_cxa_atexit=yes -+ esac -+ tm_file="$tm_file arm/aout.h arm/arm.h" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-*-ecos-elf) -+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h" -+ tmake_file="arm/t-arm arm/t-arm-elf" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-*-eabi* | arm*-*-symbianelf* ) -+ # The BPABI long long divmod functions return a 128-bit value in -+ # registers r0-r3. Correctly modeling that requires the use of -+ # TImode. -+ need_64bit_hwint=yes -+ default_use_cxa_atexit=yes -+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" -+ tmake_file="arm/t-arm arm/t-arm-elf" -+ case ${target} in -+ arm*-*-eabi*) -+ tm_file="$tm_file arm/eabi.h" -+ tmake_file="${tmake_file} arm/t-bpabi" -+ extra_options="${extra_options} arm/eabi.opt" -+ ;; -+ arm*-*-symbianelf*) -+ tm_file="${tm_file} arm/symbian.h" -+ # We do not include t-bpabi for Symbian OS because the system -+ # provides its own implementation of the BPABI functions. -+ tmake_file="${tmake_file} arm/t-symbian" -+ ;; -+ esac -+ tm_file="${tm_file} arm/aout.h arm/arm.h" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-*-rtems*) -+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h" -+ tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-*-elf) -+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" -+ tmake_file="arm/t-arm arm/t-arm-elf" -+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp" -+ ;; -+arm*-wince-pe*) -+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h" -+ tmake_file="arm/t-arm arm/t-wince-pe" -+ extra_options="${extra_options} arm/pe.opt" -+ extra_objs="pe.o" -+ ;; -+arm-*-pe*) -+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h" -+ tmake_file="arm/t-arm arm/t-pe" -+ extra_options="${extra_options} arm/pe.opt" -+ extra_objs="pe.o" -+ ;; -+avr-*-rtems*) -+ tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h" -+ tmake_file="avr/t-avr t-rtems avr/t-rtems" -+ ;; -+avr-*-*) -+ tm_file="avr/avr.h dbxelf.h" -+ ;; -+bfin*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" -+ tmake_file=bfin/t-bfin-elf -+ use_collect2=no -+ ;; -+bfin*-uclinux*) -+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/uclinux.h" -+ tmake_file=bfin/t-bfin-uclinux -+ tm_defines="${tm_defines} UCLIBC_DEFAULT=1" -+ extra_options="${extra_options} linux.opt" -+ use_collect2=no -+ ;; -+bfin*-linux-uclibc*) -+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h ./linux-sysroot-suffix.h" -+ tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux" -+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" -+ use_collect2=no -+ ;; -+bfin*-rtems*) -+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h" -+ tmake_file="bfin/t-bfin t-rtems bfin/t-rtems" -+ ;; -+bfin*-*) -+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" -+ tmake_file=bfin/t-bfin -+ use_collect2=no -+ ;; -+crisv32-*-elf | crisv32-*-none) -+ tm_file="dbxelf.h elfos.h ${tm_file}" -+ tmake_file="cris/t-cris" -+ target_cpu_default=32 -+ gas=yes -+ extra_options="${extra_options} cris/elf.opt" -+ ;; -+cris-*-elf | cris-*-none) -+ tm_file="dbxelf.h elfos.h ${tm_file}" -+ tmake_file="cris/t-cris cris/t-elfmulti" -+ gas=yes -+ extra_options="${extra_options} cris/elf.opt" -+ ;; -+crisv32-*-linux* | cris-*-linux*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h" -+ # We need to avoid using t-linux, so override default tmake_file -+ tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux" -+ extra_options="${extra_options} cris/linux.opt" -+ case $target in -+ cris-*-*) -+ target_cpu_default=10 -+ ;; -+ crisv32-*-*) -+ target_cpu_default=32 -+ ;; -+ esac -+ ;; -+crx-*-elf) -+ tm_file="elfos.h ${tm_file}" -+ extra_parts="crtbegin.o crtend.o" -+ use_collect2=no -+ ;; -+fr30-*-elf) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ tmake_file=fr30/t-fr30 -+ extra_parts="crti.o crtn.o crtbegin.o crtend.o" -+ ;; -+frv-*-elf) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h" -+ tmake_file=frv/t-frv -+ ;; -+frv-*-*linux*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \ -+ linux.h frv/linux.h frv/frv-abi.h" -+ tmake_file="${tmake_file} frv/t-frv frv/t-linux" -+ ;; -+h8300-*-rtems*) -+ tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems" -+ tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h" -+ ;; -+h8300-*-elf*) -+ tmake_file="h8300/t-h8300 h8300/t-elf" -+ tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h" -+ ;; -+h8300-*-*) -+ tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h" -+ ;; -+hppa*64*-*-linux*) -+ target_cpu_default="MASK_PA_11|MASK_PA_20" -+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \ -+ pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h" -+ tmake_file="${tmake_file} pa/t-linux64" -+ gas=yes gnu_ld=yes -+ need_64bit_hwint=yes -+ ;; -+hppa*-*-linux*) -+ target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS" -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \ -+ pa/pa32-regs.h pa/pa32-linux.h" -+ tmake_file="${tmake_file} pa/t-linux" -+ # Set the libgcc version number -+ if test x$sjlj = x1; then -+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" -+ else -+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" -+ fi -+ ;; -+# port not yet contributed. -+#hppa*-*-openbsd*) -+# target_cpu_default="MASK_PA_11" -+# ;; -+hppa[12]*-*-hpux10*) -+ case ${target} in -+ hppa1.1-*-* | hppa2*-*-*) -+ target_cpu_default="MASK_PA_11" -+ ;; -+ esac -+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ -+ pa/pa-hpux.h pa/pa-hpux10.h" -+ extra_options="${extra_options} pa/pa-hpux.opt" -+ case ${target} in -+ *-*-hpux10.[1-9]*) -+ tm_file="${tm_file} pa/pa-hpux1010.h" -+ extra_options="${extra_options} pa/pa-hpux1010.opt" -+ ;; -+ esac -+ tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib" -+ case ${enable_threads} in -+ "") -+ if test x$have_pthread_h = xyes ; then -+ tmake_file="${tmake_file} pa/t-dce-thr" -+ fi -+ ;; -+ yes | dce) -+ tmake_file="${tmake_file} pa/t-dce-thr" -+ ;; -+ esac -+ # Set the libgcc version number -+ if test x$sjlj = x1; then -+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" -+ else -+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" -+ fi -+ use_collect2=yes -+ gas=yes -+ ;; -+hppa*64*-*-hpux11*) -+ target_cpu_default="MASK_PA_11|MASK_PA_20" -+ if test x$gnu_ld = xyes -+ then -+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD" -+ fi -+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ -+ pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ -+ pa/pa-hpux11.h" -+ case ${target} in -+ *-*-hpux11.[1-9]*) -+ tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" -+ extra_options="${extra_options} pa/pa-hpux1111.opt" -+ ;; -+ *) -+ tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" -+ ;; -+ esac -+ extra_options="${extra_options} pa/pa-hpux.opt \ -+ pa/pa-hpux1010.opt pa/pa64-hpux.opt" -+ need_64bit_hwint=yes -+ tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib" -+ # Set the libgcc version number -+ if test x$sjlj = x1; then -+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" -+ else -+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" -+ fi -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \ -+ libgcc_stub.a" -+ case x${enable_threads} in -+ x | xyes | xposix ) -+ thread_file=posix -+ ;; -+ esac -+ gas=yes -+ ;; -+hppa[12]*-*-hpux11*) -+ case ${target} in -+ hppa1.1-*-* | hppa2*-*-*) -+ target_cpu_default="MASK_PA_11" -+ ;; -+ esac -+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ -+ pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" -+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt" -+ case ${target} in -+ *-*-hpux11.[1-9]*) -+ tm_file="${tm_file} pa/pa-hpux1111.h" -+ extra_options="${extra_options} pa/pa-hpux1111.opt" -+ ;; -+ esac -+ tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib" -+ # Set the libgcc version number -+ if test x$sjlj = x1; then -+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" -+ else -+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" -+ fi -+ case x${enable_threads} in -+ x | xyes | xposix ) -+ thread_file=posix -+ ;; -+ esac -+ use_collect2=yes -+ gas=yes -+ ;; -+i[34567]86-*-darwin*) -+ need_64bit_hwint=yes -+ -+ # This is so that '.../configure && make' doesn't fail due to -+ # config.guess deciding that the configuration is i386-*-darwin* and -+ # then this file using that to set --with-cpu=i386 which has no -m64 -+ # support. -+ with_cpu=${with_cpu:-generic} -+ tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm" -+ ;; -+x86_64-*-darwin*) -+ with_cpu=${with_cpu:-generic} -+ tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm" -+ tm_file="${tm_file} ${cpu_type}/darwin64.h" -+ ;; -+i[34567]86-*-elf*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h" -+ tmake_file="${tmake_file} i386/t-i386elf t-svr4" -+ ;; -+x86_64-*-elf*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/x86-64.h" -+ tmake_file="${tmake_file} i386/t-i386elf t-svr4" -+ ;; -+i[34567]86-*-aout*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h" -+ ;; -+i[34567]86-*-freebsd*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" -+ ;; -+x86_64-*-freebsd*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" -+ tmake_file="${tmake_file} i386/t-crtstuff" -+ ;; -+i[34567]86-*-netbsdelf*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" -+ ;; -+i[34567]86-*-netbsd*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h" -+ tmake_file="${tmake_file} t-netbsd" -+ extra_parts="" -+ use_collect2=yes -+ ;; -+x86_64-*-netbsd*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" -+ tmake_file="${tmake_file} i386/t-crtstuff" -+ ;; -+i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123]) -+ tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h" -+ # needed to unconfuse gdb -+ tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd" -+ # we need collect2 until our bug is fixed... -+ use_collect2=yes -+ ;; -+i[34567]86-*-openbsd*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" -+ tm_file="${tm_file} openbsd.h i386/openbsdelf.h" -+ gas=yes -+ gnu_ld=yes -+ ;; -+i[34567]86-*-coff*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h" -+ ;; -+i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu) -+ # Intel 80386's running GNU/* -+ # with ELF format using glibc 2 -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h" -+ case ${target} in -+ i[34567]86-*-linux*) -+ if test x$enable_targets = xall; then -+ tm_file="${tm_file} i386/x86-64.h i386/linux64.h" -+ tm_defines="${tm_defines} TARGET_BI_ARCH=1" -+ tmake_file="${tmake_file} i386/t-linux64" -+ need_64bit_hwint=yes -+ case X"${with_cpu}" in -+ Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx) -+ ;; -+ X) -+ if test x$with_cpu_64 = x; then -+ with_cpu_64=generic -+ fi -+ ;; -+ *) -+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 -+ echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2 -+ exit 1 -+ ;; -+ esac -+ else -+ tm_file="${tm_file} i386/linux.h" -+ fi -+ ;; -+ i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;; -+ i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;; -+ i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;; -+ i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";; -+ esac -+ tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules" -+ ;; -+x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \ -+ i386/x86-64.h i386/linux64.h" -+ case ${target} in -+ x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;; -+ x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;; -+ esac -+ tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules" -+ ;; -+i[34567]86-pc-msdosdjgpp*) -+ xm_file=i386/xm-djgpp.h -+ tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h" -+ tmake_file="${tmake_file} i386/t-djgpp" -+ extra_options="${extra_options} i386/djgpp.opt" -+ gnu_ld=yes -+ gas=yes -+ ;; -+i[34567]86-*-lynxos*) -+ xm_defines=POSIX -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" -+ tmake_file="${tmake_file} i386/t-crtstuff t-lynx" -+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" -+ extra_options="${extra_options} lynx.opt" -+ thread_file=lynx -+ gnu_ld=yes -+ gas=yes -+ ;; -+i[3456x]86-*-netware*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h" -+ tmake_file="${tmake_file} i386/t-netware" -+ extra_objs=netware.o -+ case /${with_ld} in -+ */nwld) -+ extra_objs="$extra_objs nwld.o" -+ tm_file="${tm_file} i386/nwld.h" -+ tmake_file="${tmake_file} i386/t-nwld" -+ extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def" -+ ;; -+ esac -+ case x${enable_threads} in -+ x | xyes | xposix) thread_file='posix';; -+ xnks) thread_file='nks';; -+ xno) ;; -+ *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;; -+ esac -+ ;; -+i[34567]86-*-nto-qnx*) -+ tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h" -+ tmake_file="${tmake_file} i386/t-nto" -+ gnu_ld=yes -+ gas=yes -+ ;; -+i[34567]86-*-rtems*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h" -+ extra_parts="crtbegin.o crtend.o crti.o crtn.o" -+ tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems" -+ ;; -+i[34567]86-*-solaris2*) -+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h" -+ case ${target} in -+ *-*-solaris2.1[0-9]*) -+ tm_file="${tm_file} sol2-10.h" -+ ;; -+ esac -+ tm_file="${tm_file} i386/sol2.h" -+ tmake_file="${tmake_file} t-sol2 t-svr4" -+ c_target_objs="${c_target_objs} sol2-c.o" -+ cxx_target_objs="${cxx_target_objs} sol2-c.o" -+ extra_objs="sol2.o" -+ tm_p_file="${tm_p_file} sol2-protos.h" -+ if test x$gnu_ld = xyes; then -+ tmake_file="$tmake_file t-slibgcc-elf-ver" -+ tm_defines="${tm_defines} TARGET_GNU_LD=1" -+ else -+ tmake_file="$tmake_file t-slibgcc-sld" -+ fi -+ if test x$gas = xyes; then -+ tm_file="usegas.h ${tm_file}" -+ fi -+ tm_file="$tm_file tm-dwarf2.h" -+ case ${target} in -+ *-*-solaris2.1[0-9]*) -+ tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h" -+ tm_defines="${tm_defines} TARGET_BI_ARCH=1" -+ tmake_file="$tmake_file i386/t-sol2-10" -+ # i386/t-crtstuff only affects libgcc. Its inclusion -+ # depends on a runtime test and is thus performed in -+ # libgcc/configure.ac instead. -+ need_64bit_hwint=yes -+ case X"${with_cpu}" in -+ Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx) -+ ;; -+ X) -+ if test x$with_cpu_64 = x; then -+ with_cpu_64=generic -+ fi -+ ;; -+ *) -+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 -+ echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ esac -+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in -+ "":yes:* | yes:yes:* ) -+ thread_file=posix -+ ;; -+ "":*:yes | yes:*:yes ) -+ thread_file=solaris -+ ;; -+ esac -+ ;; -+i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae) -+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h" -+ case ${target} in -+ *-vxworksae*) -+ tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h" -+ tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" -+ ;; -+ *) -+ tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h" -+ tmake_file="${tmake_file} i386/t-vxworks" -+ ;; -+ esac -+ ;; -+i[34567]86-*-pe | i[34567]86-*-cygwin*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h" -+ xm_file=i386/xm-cygwin.h -+ # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h -+ if test x$sjlj = x0; then -+ tmake_eh_file="i386/t-dw2-eh" -+ else -+ tmake_eh_file="i386/t-sjlj-eh" -+ fi -+ tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin" -+ target_gtfiles="\$(srcdir)/config/i386/winnt.c" -+ extra_options="${extra_options} i386/cygming.opt" -+ extra_objs="winnt.o winnt-stubs.o" -+ c_target_objs="${c_target_objs} cygwin2.o msformat-c.o" -+ cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o" -+ extra_gcc_objs=cygwin1.o -+ if test x$enable_threads = xyes; then -+ thread_file='posix' -+ fi -+ ;; -+i[34567]86-*-mingw* | x86_64-*-mingw*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h" -+ xm_file=i386/xm-mingw32.h -+ case ${target} in -+ x86_64-*-*) -+ need_64bit_hwint=yes -+ ;; -+ *) -+ ;; -+ esac -+ # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h -+ if test x$sjlj = x0; then -+ tmake_eh_file="i386/t-dw2-eh" -+ else -+ tmake_eh_file="i386/t-sjlj-eh" -+ fi -+ tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-mingw32" -+ target_gtfiles="\$(srcdir)/config/i386/winnt.c" -+ extra_options="${extra_options} i386/cygming.opt i386/mingw.opt" -+ extra_objs="winnt.o winnt-stubs.o" -+ c_target_objs="${c_target_objs} msformat-c.o" -+ cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" -+ default_use_cxa_atexit=yes -+ case ${enable_threads} in -+ "" | yes | win32) -+ thread_file='win32' -+ tmake_file="${tmake_file} i386/t-gthr-win32" -+ ;; -+ esac -+ case ${target} in -+ x86_64-*-mingw*) -+ tmake_file="${tmake_file} i386/t-crtfm" -+ ;; -+ *) -+ ;; -+ esac -+ case ${target} in -+ *mingw32crt*) -+ tm_file="${tm_file} i386/crtdll.h" -+ ;; -+ *mingw32msv* | *mingw*) -+ ;; -+ esac -+ ;; -+i[34567]86-*-interix3*) -+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h" -+ tmake_file="${tmake_file} i386/t-interix" -+ extra_objs=winnt.o -+ target_gtfiles="\$(srcdir)/config/i386/winnt.c" -+ if test x$enable_threads = xyes ; then -+ thread_file='posix' -+ fi -+ if test x$stabs = xyes ; then -+ tm_file="${tm_file} dbxcoff.h" -+ fi -+ ;; -+ia64*-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h" -+ tmake_file="ia64/t-ia64" -+ target_cpu_default="0" -+ if test x$gas = xyes -+ then -+ target_cpu_default="${target_cpu_default}|MASK_GNU_AS" -+ fi -+ if test x$gnu_ld = xyes -+ then -+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD" -+ fi -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" -+ ;; -+ia64*-*-freebsd*) -+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" -+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" -+ tmake_file="${tmake_file} ia64/t-ia64" -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" -+ ;; -+ia64*-*-linux*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h" -+ tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc" -+ if test x$with_system_libunwind != xyes ; then -+ tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind" -+ fi -+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" -+ ;; -+ia64*-*-hpux*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h" -+ tmake_file="ia64/t-ia64 ia64/t-hpux" -+ target_cpu_default="MASK_GNU_AS" -+ case x$enable_threads in -+ x | xyes | xposix ) -+ thread_file=posix -+ ;; -+ esac -+ use_collect2=no -+ c_target_objs="ia64-c.o" -+ cxx_target_objs="ia64-c.o" -+ extra_options="${extra_options} ia64/ilp32.opt" -+ ;; -+iq2000*-*-elf*) -+ tm_file="svr4.h elfos.h iq2000/iq2000.h" -+ tmake_file=iq2000/t-iq2000 -+ out_file=iq2000/iq2000.c -+ md_file=iq2000/iq2000.md -+ ;; -+m32r-*-elf*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ extra_parts="crtinit.o crtfini.o" -+ ;; -+m32rle-*-elf*) -+ tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}" -+ extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o" -+ ;; -+m32r-*-rtems*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h" -+ tmake_file="m32r/t-m32r t-rtems" -+ extra_parts="crtinit.o crtfini.o" -+ ;; -+m32r-*-linux*) -+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h" -+ # We override the tmake_file for linux -- why? -+ tmake_file="t-slibgcc-elf-ver m32r/t-linux" -+ gnu_ld=yes -+ if test x$enable_threads = xyes; then -+ thread_file='posix' -+ fi -+ ;; -+m32rle-*-linux*) -+ tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h" -+ # We override the tmake_file for linux -- why? -+ tmake_file="t-slibgcc-elf-ver m32r/t-linux" -+ gnu_ld=yes -+ if test x$enable_threads = xyes; then -+ thread_file='posix' -+ fi -+ ;; -+# m68hc11 and m68hc12 share the same machine description. -+m68hc11-*-*|m6811-*-*) -+ tm_file="dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h" -+ tm_p_file="m68hc11/m68hc11-protos.h" -+ md_file="m68hc11/m68hc11.md" -+ out_file="m68hc11/m68hc11.c" -+ tmake_file="m68hc11/t-m68hc11" -+ ;; -+m68hc12-*-*|m6812-*-*) -+ tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h" -+ tm_p_file="m68hc11/m68hc11-protos.h" -+ md_file="m68hc11/m68hc11.md" -+ out_file="m68hc11/m68hc11.c" -+ tmake_file="m68hc11/t-m68hc11" -+ extra_options="${extra_options} m68hc11/m68hc11.opt" -+ ;; -+m68k-*-aout*) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs" -+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h" -+ ;; -+m68k-*-coff*) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h" -+ ;; -+m68k-*-elf* | fido-*-elf*) -+ case ${target} in -+ fido-*-elf*) -+ # Check that $with_cpu makes sense. -+ case $with_cpu in -+ "" | "fidoa") -+ ;; -+ *) -+ echo "Cannot accept --with-cpu=$with_cpu" -+ exit 1 -+ ;; -+ esac -+ with_cpu=fidoa -+ ;; -+ *) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ ;; -+ esac -+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf" -+ # Add multilibs for targets other than fido. -+ case ${target} in -+ fido-*-elf*) -+ ;; -+ *) -+ tmake_file="$tmake_file m68k/t-mlibs" -+ ;; -+ esac -+ extra_parts="crtbegin.o crtend.o" -+ ;; -+m68k*-*-netbsdelf*) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5475 -+ tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ ;; -+m68k*-*-openbsd*) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5475 -+ # needed to unconfuse gdb -+ tm_defines="${tm_defines} OBSD_OLD_GAS" -+ tm_file="${tm_file} openbsd.h m68k/openbsd.h" -+ tmake_file="t-libc-ok t-openbsd m68k/t-openbsd" -+ # we need collect2 until our bug is fixed... -+ use_collect2=yes -+ ;; -+m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux -+ # with uClibc, using the original -+ # m68k-elf-based ABI -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ tmake_file="m68k/t-floatlib m68k/t-uclinux" -+ ;; -+m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux -+ # with uClibc, using the new GNU/Linux-style -+ # ABI. -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h" -+ tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1" -+ extra_options="${extra_options} linux.opt" -+ tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs" -+ ;; -+m68k-*-linux*) # Motorola m68k's running GNU/Linux -+ # with ELF format using glibc 2 -+ # aka the GNU/Linux C library 6. -+ default_m68k_cpu=68020 -+ default_cf_cpu=5475 -+ with_arch=${with_arch:-m68k} -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h ./sysroot-suffix.h" -+ extra_options="${extra_options} m68k/ieee.opt" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs" -+ # if not configured with --enable-sjlj-exceptions, bump the -+ # libgcc version number -+ if test x$sjlj != x1; then -+ tmake_file="$tmake_file m68k/t-slibgcc-elf-ver" -+ fi -+ ;; -+m68k-*-rtems*) -+ default_m68k_cpu=68020 -+ default_cf_cpu=5206 -+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs" -+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h" -+ tm_defines="${tm_defines} MOTOROLA=1" -+ extra_parts="crtbegin.o crtend.o" -+ ;; -+mcore-*-elf) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h" -+ tmake_file=mcore/t-mcore -+ inhibit_libc=true -+ ;; -+mcore-*-pe*) -+ tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h" -+ tmake_file=mcore/t-mcore-pe -+ inhibit_libc=true -+ ;; -+mips-sgi-irix[56]*) -+ tm_file="elfos.h ${tm_file} mips/iris.h" -+ tmake_file="mips/t-iris mips/t-slibgcc-irix" -+ target_cpu_default="MASK_ABICALLS" -+ case ${target} in -+ *-*-irix5*) -+ tm_file="${tm_file} mips/iris5.h" -+ ;; -+ -+ *-*-irix6*) -+ tm_file="${tm_file} mips/iris6.h" -+ tmake_file="${tmake_file} mips/t-iris6" -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" -+ ;; -+ esac -+ if test "x$stabs" = xyes -+ then -+ tm_file="${tm_file} dbx.h mips/dbxmdebug.h" -+ fi -+ if test "x$gnu_ld" = xyes -+ then -+ tm_defines="${tm_defines} IRIX_USING_GNU_LD" -+ fi -+ case ${enable_threads}:${have_pthread_h} in -+ "":yes | yes:yes ) thread_file=posix ;; -+ esac -+ ;; -+mips*-*-netbsd*) # NetBSD/mips, either endian. -+ target_cpu_default="MASK_ABICALLS" -+ tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h" -+ ;; -+mips64*-*-linux* | mipsisa64*-*-linux*) -+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h" -+ tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16" -+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32" -+ case ${target} in -+ mips64el-st-linux-gnu) -+ tm_file="${tm_file} mips/st.h" -+ tmake_file="${tmake_file} mips/t-st" -+ ;; -+ mips64octeon*-*-linux*) -+ tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\"" -+ target_cpu_default=MASK_SOFT_FLOAT_ABI -+ ;; -+ mipsisa64r2*-*-linux*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65" -+ ;; -+ esac -+ gnu_ld=yes -+ gas=yes -+ test x$with_llsc != x || with_llsc=yes -+ ;; -+mips*-*-linux*) # Linux MIPS, either endian. -+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h" -+ tmake_file="${tmake_file} mips/t-libgcc-mips16" -+ case ${target} in -+ mipsisa32r2*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33" -+ ;; -+ mipsisa32*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" -+ esac -+ test x$with_llsc != x || with_llsc=yes -+ ;; -+mips*-*-openbsd*) -+ tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS" -+ target_cpu_default="MASK_ABICALLS" -+ tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h" -+ case ${target} in -+ mips*el-*-openbsd*) -+ tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";; -+ *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";; -+ esac -+ ;; -+mips*-sde-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h mips/sde.h" -+ tmake_file="mips/t-sde mips/t-libgcc-mips16" -+ case "${with_newlib}" in -+ yes) -+ # newlib / libgloss. -+ ;; -+ *) -+ # MIPS toolkit libraries. -+ tm_file="$tm_file mips/sdemtk.h" -+ tmake_file="$tmake_file mips/t-sdemtk" -+ extra_options="$extra_options mips/sdemtk.opt" -+ case ${enable_threads} in -+ "" | yes | mipssde) -+ thread_file='mipssde' -+ ;; -+ esac -+ ;; -+ esac -+ case ${target} in -+ mipsisa32r2*) -+ tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" -+ ;; -+ mipsisa32*) -+ tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32" -+ ;; -+ mipsisa64r2*) -+ tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32" -+ ;; -+ mipsisa64*) -+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32" -+ ;; -+ esac -+ ;; -+mipsisa32-*-elf* | mipsisa32el-*-elf* | \ -+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \ -+mipsisa64-*-elf* | mipsisa64el-*-elf* | \ -+mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h" -+ tmake_file="mips/t-isa3264 mips/t-libgcc-mips16" -+ case ${target} in -+ mipsisa32r2*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33" -+ ;; -+ mipsisa32*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" -+ ;; -+ mipsisa64r2*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65" -+ ;; -+ mipsisa64*) -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64" -+ ;; -+ esac -+ case ${target} in -+ mipsisa32*-*-elfoabi*) -+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32" -+ tm_file="${tm_file} mips/elfoabi.h" -+ ;; -+ mipsisa64*-*-elfoabi*) -+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64" -+ tm_file="${tm_file} mips/elfoabi.h" -+ ;; -+ *-*-elf*) -+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" -+ ;; -+ esac -+ ;; -+mipsisa64sr71k-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h" -+ tmake_file=mips/t-sr71k -+ target_cpu_default="MASK_64BIT|MASK_FLOAT64" -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" -+ ;; -+mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h" -+ tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1" -+ target_cpu_default="MASK_64BIT|MASK_FLOAT64" -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" -+ ;; -+mips-*-elf* | mipsel-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h" -+ tmake_file="mips/t-elf mips/t-libgcc-mips16" -+ ;; -+mips64-*-elf* | mips64el-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elf.h" -+ tmake_file="mips/t-elf mips/t-libgcc-mips16" -+ target_cpu_default="MASK_64BIT|MASK_FLOAT64" -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" -+ ;; -+mips64vr-*-elf* | mips64vrel-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/vr.h mips/elf.h" -+ tmake_file=mips/t-vr -+ ;; -+mips64orion-*-elf* | mips64orionel-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h" -+ tmake_file="mips/t-elf mips/t-libgcc-mips16" -+ target_cpu_default="MASK_64BIT|MASK_FLOAT64" -+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" -+ ;; -+mips*-*-rtems*) -+ tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" -+ tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems" -+ ;; -+mips-wrs-vxworks) -+ tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h" -+ tmake_file="${tmake_file} mips/t-vxworks" -+ ;; -+mipstx39-*-elf* | mipstx39el-*-elf*) -+ tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h" -+ tmake_file="mips/t-r3900 mips/t-libgcc-mips16" -+ ;; -+mmix-knuth-mmixware) -+ need_64bit_hwint=yes -+ ;; -+mn10300-*-*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ if test x$stabs = xyes -+ then -+ tm_file="${tm_file} dbx.h" -+ fi -+ use_collect2=no -+ ;; -+pdp11-*-bsd) -+ tm_file="${tm_file} pdp11/2bsd.h" -+ use_fixproto=yes -+ ;; -+pdp11-*-*) -+ ;; -+picochip-*) -+ # Nothing special -+ ;; -+# port not yet contributed -+#powerpc-*-openbsd*) -+# tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit " -+# extra_headers= -+# ;; -+powerpc64-*-linux*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" -+ test x$with_cpu != x || cpu_is_64bit=yes -+ test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h" -+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h" -+ if test x${enable_secureplt} = xyes; then -+ tm_file="rs6000/secureplt.h ${tm_file}" -+ fi -+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" -+ tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" -+ ;; -+powerpc64-*-gnu*) -+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h" -+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" -+ tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" -+ ;; -+powerpc-*-darwin*) -+ extra_options="${extra_options} rs6000/darwin.opt" -+ extra_parts="crt2.o" -+ case ${target} in -+ *-darwin1[0-9]* | *-darwin[8-9]*) -+ tmake_file="${tmake_file} rs6000/t-darwin8" -+ tm_file="${tm_file} rs6000/darwin8.h" -+ ;; -+ *-darwin7*) -+ tm_file="${tm_file} rs6000/darwin7.h" -+ ;; -+ *-darwin[0-6]*) -+ ;; -+ esac -+ extra_headers=altivec.h -+ ;; -+powerpc64-*-darwin*) -+ tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h" -+ extra_options="${extra_options} ${cpu_type}/darwin.opt" -+ # We're omitting t-darwin8 to avoid building any multilibs -+ extra_headers=altivec.h -+ ;; -+powerpc*-*-freebsd*) -+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ ;; -+powerpc-*-netbsd*) -+ tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" -+ tmake_file="${tmake_file} rs6000/t-netbsd" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ ;; -+powerpc-*-eabispe*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-spe rs6000/t-ppccomm" -+ ;; -+powerpc-*-eabisimaltivec*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" -+ ;; -+powerpc-*-eabisim*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ ;; -+powerpc-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ ;; -+powerpc-*-eabialtivec*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" -+ ;; -+powerpc-xilinx-eabi*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ ;; -+powerpc-*-eabi*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ ;; -+powerpc-*-rtems*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm" -+ ;; -+powerpc-*-linux*altivec*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" -+ ;; -+powerpc-*-linux*spe*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" -+ ;; -+powerpc-*-linux*paired*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/750cl.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" -+ ;; -+powerpc-*-linux*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" -+ case ${enable_targets}:${cpu_is_64bit} in -+ *powerpc64* | all:* | *:yes) -+ if test x$cpu_is_64bit = xyes; then -+ tm_file="${tm_file} rs6000/default64.h" -+ fi -+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h" -+ tmake_file="$tmake_file rs6000/t-linux64" -+ extra_options="${extra_options} rs6000/linux64.opt" -+ ;; -+ *) -+ tm_file="${tm_file} rs6000/linux.h" -+ ;; -+ esac -+ tmake_file="${tmake_file} rs6000/t-fprules-softfp soft-fp/t-softfp" -+ if test x${enable_secureplt} = xyes; then -+ tm_file="rs6000/secureplt.h ${tm_file}" -+ fi -+ ;; -+powerpc-*-gnu-gnualtivec*) -+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" -+ if test x$enable_threads = xyes; then -+ thread_file='posix' -+ fi -+ ;; -+powerpc-*-gnu*) -+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ if test x$enable_threads = xyes; then -+ thread_file='posix' -+ fi -+ ;; -+powerpc-wrs-vxworks|powerpc-wrs-vxworksae) -+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" -+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ extra_headers=ppc-asm.h -+ case ${target} in -+ *-vxworksae*) -+ tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h" -+ tmake_file="${tmake_file} rs6000/t-vxworksae" -+ ;; -+ *-vxworks*) -+ tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h" -+ ;; -+ esac -+ ;; -+powerpc-*-lynxos*) -+ xm_defines=POSIX -+ tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h" -+ tmake_file="t-lynx rs6000/t-lynx" -+ extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" -+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" -+ extra_options="${extra_options} lynx.opt" -+ thread_file=lynx -+ gnu_ld=yes -+ gas=yes -+ ;; -+powerpcle-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ ;; -+powerpcle-*-eabisim*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ ;; -+powerpcle-*-eabi*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ ;; -+powerpc-xilinx-eabi*) -+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h" -+ extra_options="${extra_options} rs6000/sysv4.opt" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" -+ ;; -+rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*) -+ tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h" -+ tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas" -+ extra_options="${extra_options} rs6000/aix41.opt" -+ use_collect2=yes -+ extra_headers= -+ use_fixproto=yes -+ ;; -+rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) -+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h" -+ tmake_file=rs6000/t-aix43 -+ extra_options="${extra_options} rs6000/aix64.opt" -+ use_collect2=yes -+ thread_file='aix' -+ extra_headers= -+ ;; -+rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) -+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h" -+ extra_options="${extra_options} rs6000/aix64.opt" -+ tmake_file=rs6000/t-aix43 -+ use_collect2=yes -+ thread_file='aix' -+ extra_headers= -+ ;; -+rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*) -+ tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h" -+ tmake_file=rs6000/t-aix52 -+ extra_options="${extra_options} rs6000/aix64.opt" -+ use_collect2=yes -+ thread_file='aix' -+ extra_headers= -+ ;; -+rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*) -+ tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h" -+ tmake_file=rs6000/t-aix52 -+ extra_options="${extra_options} rs6000/aix64.opt" -+ use_collect2=yes -+ thread_file='aix' -+ extra_headers=altivec.h -+ ;; -+rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*) -+ tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h" -+ tmake_file=rs6000/t-aix52 -+ extra_options="${extra_options} rs6000/aix64.opt" -+ use_collect2=yes -+ thread_file='aix' -+ extra_headers=altivec.h -+ ;; -+s390-*-linux*) -+ tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" -+ tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux" -+ ;; -+s390x-*-linux*) -+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" -+ tm_p_file=s390/s390-protos.h -+ md_file=s390/s390.md -+ extra_modes=s390/s390-modes.def -+ out_file=s390/s390.c -+ tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64" -+ ;; -+s390x-ibm-tpf*) -+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h" -+ tm_p_file=s390/s390-protos.h -+ md_file=s390/s390.md -+ extra_modes=s390/s390-modes.def -+ out_file=s390/s390.c -+ extra_parts="crtbeginS.o crtendS.o" -+ tmake_file="s390/t-crtstuff s390/t-tpf" -+ thread_file='tpf' -+ extra_options="${extra_options} s390/tpf.opt" -+ ;; -+score-*-elf) -+ tm_file="dbxelf.h elfos.h score/elf.h score/score.h" -+ tmake_file=score/t-score-elf -+ extra_objs="score7.o score3.o" -+ ;; -+sh-*-elf* | sh[12346l]*-*-elf* | \ -+sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \ -+ sh-*-linux* | sh[2346lbe]*-*-linux* | \ -+ sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ -+ sh64-*-netbsd* | sh64l*-*-netbsd*) -+ tmake_file="${tmake_file} sh/t-sh sh/t-elf" -+ if test x${with_endian} = x; then -+ case ${target} in -+ sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; -+ shbe-*-* | sheb-*-*) with_endian=big,little ;; -+ sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; -+ shl* | sh64l* | sh*-*-linux* | \ -+ sh5l* | sh-superh-elf) with_endian=little,big ;; -+ sh[1234]*-*-*) with_endian=big ;; -+ *) with_endian=big,little ;; -+ esac -+ fi -+ case ${with_endian} in -+ big|little) tmake_file="${tmake_file} sh/t-1e" ;; -+ big,little|little,big) ;; -+ *) echo "with_endian=${with_endian} not supported."; exit 1 ;; -+ esac -+ case ${with_endian} in -+ little*) tm_file="sh/little.h ${tm_file}" ;; -+ esac -+ tm_file="${tm_file} dbxelf.h elfos.h" -+ case ${target} in -+ sh*-*-netbsd*) ;; -+ *) tm_file="${tm_file} svr4.h" ;; -+ esac -+ tm_file="${tm_file} sh/elf.h" -+ case ${target} in -+ sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" -+ tm_file="${tm_file} linux.h sh/linux.h" ;; -+ sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;; -+ sh*-superh-elf) if test x$with_libgloss != xno; then -+ with_libgloss=yes -+ tm_file="${tm_file} sh/newlib.h" -+ fi -+ tm_file="${tm_file} sh/embed-elf.h sh/superh.h" -+ tmake_file="${tmake_file} sh/t-superh" -+ extra_options="${extra_options} sh/superh.opt" ;; -+ *) if test x$with_newlib = xyes \ -+ && test x$with_libgloss = xyes; then -+ tm_file="${tm_file} sh/newlib.h" -+ fi -+ tm_file="${tm_file} sh/embed-elf.h" ;; -+ esac -+ case ${target} in -+ sh5*-*-netbsd*) -+ # SHmedia, 32-bit ABI -+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd" -+ ;; -+ sh64*-netbsd*) -+ # SHmedia, 64-bit ABI -+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64" -+ ;; -+ *-*-netbsd) -+ tmake_file="${tmake_file} sh/t-netbsd" -+ ;; -+ sh64*-*-linux*) -+ tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64" -+ tm_file="${tm_file} sh/sh64.h" -+ extra_headers="shmedia.h ushmedia.h sshmedia.h" -+ ;; -+ sh64*) -+ tmake_file="${tmake_file} sh/t-sh64" -+ tm_file="${tm_file} sh/sh64.h" -+ extra_headers="shmedia.h ushmedia.h sshmedia.h" -+ ;; -+ *-*-symbianelf*) -+ tmake_file="sh/t-symbian" -+ tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h" -+ extra_objs="symbian.o" -+ extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o" -+ ;; -+ esac -+ # sed el/eb endian suffixes away to avoid confusion with sh[23]e -+ case `echo ${target} | sed 's/e[lb]-/-/'` in -+ sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;; -+ sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;; -+ sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; -+ sh4a_single*) sh_cpu_target=sh4a-single ;; -+ sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; -+ sh4al) sh_cpu_target=sh4al ;; -+ sh4a*) sh_cpu_target=sh4a ;; -+ sh4_single_only*) sh_cpu_target=sh4-single-only ;; -+ sh4_single*) sh_cpu_target=sh4-single ;; -+ sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; -+ sh4* | sh-superh-*) sh_cpu_target=sh4 ;; -+ sh3e*) sh_cpu_target=sh3e ;; -+ sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; -+ sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; -+ sh2a_single*) sh_cpu_target=sh2a-single ;; -+ sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; -+ sh2a*) sh_cpu_target=sh2a ;; -+ sh2e*) sh_cpu_target=sh2e ;; -+ sh2*) sh_cpu_target=sh2 ;; -+ *) sh_cpu_target=sh1 ;; -+ esac -+ # did the user say --without-fp ? -+ if test x$with_fp = xno; then -+ case ${sh_cpu_target} in -+ sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;; -+ sh4al | sh1) ;; -+ sh4a* ) sh_cpu_target=sh4a-nofpu ;; -+ sh4*) sh_cpu_target=sh4-nofpu ;; -+ sh3*) sh_cpu_target=sh3 ;; -+ sh2a*) sh_cpu_target=sh2a-nofpu ;; -+ sh2*) sh_cpu_target=sh2 ;; -+ *) echo --without-fp not available for $target: ignored -+ esac -+ tm_defines="$tm_defines STRICT_NOFPU=1" -+ fi -+ sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" -+ case $sh_cpu_default in -+ sh5-64media-nofpu | sh5-64media | \ -+ sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \ -+ sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ -+ sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ -+ sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \ -+ sh3e | sh3 | sh2e | sh2 | sh1) ;; -+ "") sh_cpu_default=${sh_cpu_target} ;; -+ *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; -+ esac -+ sh_multilibs=${with_multilib_list} -+ if test x${sh_multilibs} = x ; then -+ case ${target} in -+ sh64-superh-linux* | \ -+ sh[1234]*) sh_multilibs=${sh_cpu_target} ;; -+ sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;; -+ sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; -+ sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;; -+ sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; -+ *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; -+ esac -+ if test x$with_fp = xno; then -+ sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" -+ fi -+ fi -+ target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` -+ tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' -+ sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` -+ for sh_multilib in ${sh_multilibs}; do -+ case ${sh_multilib} in -+ sh1 | sh2 | sh2e | sh3 | sh3e | \ -+ sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\ -+ sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \ -+ sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \ -+ sh5-64media | sh5-64media-nofpu | \ -+ sh5-32media | sh5-32media-nofpu | \ -+ sh5-compact | sh5-compact-nofpu) -+ tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}" -+ tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" -+ ;; -+ *) -+ echo "with_multilib_list=${sh_multilib} not supported." -+ exit 1 -+ ;; -+ esac -+ done -+ if test x${enable_incomplete_targets} = xyes ; then -+ tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1" -+ fi -+ ;; -+sh-*-rtems*) -+ tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems" -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h" -+ ;; -+sh-wrs-vxworks) -+ tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks" -+ tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h" -+ ;; -+sh-*-*) -+ tm_file="${tm_file} dbxcoff.h sh/coff.h" -+ ;; -+sparc-*-netbsdelf*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" -+ extra_options="${extra_options} sparc/long-double-switch.opt" -+ ;; -+sparc64-*-openbsd*) -+ tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h" -+ extra_options="${extra_options} sparc/little-endian.opt" -+ gas=yes gnu_ld=yes -+ with_cpu=ultrasparc -+ ;; -+sparc-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h" -+ tmake_file="sparc/t-elf sparc/t-crtfm" -+ extra_parts="crti.o crtn.o crtbegin.o crtend.o" -+ ;; -+sparc-*-linux*) # SPARC's running GNU/Linux, libc6 -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h" -+ extra_options="${extra_options} sparc/long-double-switch.opt" -+ tmake_file="${tmake_file} sparc/t-linux" -+ if test x$enable_targets = xall; then -+ tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h" -+ tmake_file="${tmake_file} sparc/t-linux64" -+ else -+ tm_file="${tm_file} sparc/linux.h" -+ fi -+ tmake_file="${tmake_file} sparc/t-crtfm" -+ ;; -+sparc-*-rtems*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h" -+ tmake_file="sparc/t-elf sparc/t-crtfm t-rtems" -+ extra_parts="crti.o crtn.o crtbegin.o crtend.o" -+ ;; -+sparc64-*-solaris2* | sparcv9-*-solaris2*) -+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" -+ case ${target} in -+ *-*-solaris2.1[0-9]*) -+ tm_file="${tm_file} sol2-10.h" -+ ;; -+ esac -+ tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h" -+ if test x$gnu_ld = xyes; then -+ tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h" -+ fi -+ if test x$gas = xyes; then -+ tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h" -+ fi -+ tm_file="${tm_file} tm-dwarf2.h" -+ tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm" -+ if test x$gnu_ld = xyes; then -+ tmake_file="$tmake_file t-slibgcc-elf-ver" -+ else -+ tmake_file="$tmake_file t-slibgcc-sld" -+ fi -+ c_target_objs="sol2-c.o" -+ cxx_target_objs="sol2-c.o" -+ extra_objs="sol2.o" -+ tm_p_file="${tm_p_file} sol2-protos.h" -+ extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o" -+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in -+ "":yes:* | yes:yes:* ) thread_file=posix ;; -+ "":*:yes | yes:*:yes ) thread_file=solaris ;; -+ esac -+ ;; -+sparc-*-solaris2*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" -+ case ${target} in -+ *-*-solaris2.1[0-9]*) -+ tm_file="${tm_file} sol2-10.h" -+ ;; -+ esac -+ tm_file="${tm_file} sparc/sol2.h" -+ if test x$gnu_ld = xyes; then -+ tm_file="${tm_file} sparc/sol2-gld.h" -+ fi -+ if test x$gas = xyes; then -+ tm_file="${tm_file} sparc/sol2-gas.h" -+ fi -+ tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm" -+ if test x$gnu_ld = xyes; then -+ tmake_file="$tmake_file t-slibgcc-elf-ver" -+ else -+ tmake_file="$tmake_file t-slibgcc-sld" -+ fi -+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h" -+ if test x$gnu_ld = xyes; then -+ tm_file="${tm_file} sparc/sol2-gld-bi.h" -+ fi -+ if test x$gas = xyes; then -+ tm_file="${tm_file} sparc/sol2-gas-bi.h" -+ fi -+ tm_file="${tm_file} tm-dwarf2.h" -+ tmake_file="$tmake_file sparc/t-sol2-64" -+ test x$with_cpu != x || with_cpu=v9 -+ c_target_objs="sol2-c.o" -+ cxx_target_objs="sol2-c.o" -+ extra_objs="sol2.o" -+ tm_p_file="${tm_p_file} sol2-protos.h" -+ extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" -+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in -+ "":yes:* | yes:yes:* ) -+ thread_file=posix -+ ;; -+ "":*:yes | yes:*:yes ) -+ thread_file=solaris -+ ;; -+ esac -+ ;; -+sparc-wrs-vxworks) -+ tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h" -+ tmake_file="${tmake_file} sparc/t-vxworks" -+ ;; -+sparc64-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h" -+ extra_options="${extra_options} sparc/little-endian.opt" -+ tmake_file="${tmake_file} sparc/t-crtfm" -+ extra_parts="crtbegin.o crtend.o" -+ ;; -+sparc64-*-freebsd*|ultrasparc-*-freebsd*) -+ tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" -+ extra_options="${extra_options} sparc/long-double-switch.opt" -+ tmake_file="${tmake_file} sparc/t-crtfm" -+ case "x$with_cpu" in -+ xultrasparc) ;; -+ x) with_cpu=ultrasparc ;; -+ *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; -+ esac -+ ;; -+sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux -+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h sparc/linux64.h" -+ extra_options="${extra_options} sparc/long-double-switch.opt" -+ tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm" -+ ;; -+sparc64-*-netbsd*) -+ tm_file="sparc/biarch64.h ${tm_file}" -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" -+ extra_options="${extra_options} sparc/long-double-switch.opt" -+ tmake_file="${tmake_file} sparc/t-netbsd64" -+ ;; -+spu-*-elf*) -+ tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h" -+ tmake_file="spu/t-spu-elf" -+ extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h" -+ extra_modes=spu/spu-modes.def -+ c_target_objs="${c_target_objs} spu-c.o" -+ cxx_target_objs="${cxx_target_objs} spu-c.o" -+ ;; -+v850e1-*-*) -+ target_cpu_default="TARGET_CPU_v850e1" -+ tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" -+ tm_p_file=v850/v850-protos.h -+ tmake_file=v850/t-v850e -+ md_file=v850/v850.md -+ out_file=v850/v850.c -+ extra_options="${extra_options} v850/v850.opt" -+ if test x$stabs = xyes -+ then -+ tm_file="${tm_file} dbx.h" -+ fi -+ use_collect2=no -+ c_target_objs="v850-c.o" -+ cxx_target_objs="v850-c.o" -+ ;; -+v850e-*-*) -+ target_cpu_default="TARGET_CPU_v850e" -+ tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" -+ tm_p_file=v850/v850-protos.h -+ tmake_file=v850/t-v850e -+ md_file=v850/v850.md -+ out_file=v850/v850.c -+ extra_options="${extra_options} v850/v850.opt" -+ if test x$stabs = xyes -+ then -+ tm_file="${tm_file} dbx.h" -+ fi -+ use_collect2=no -+ c_target_objs="v850-c.o" -+ cxx_target_objs="v850-c.o" -+ ;; -+v850-*-*) -+ target_cpu_default="TARGET_CPU_generic" -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ tmake_file=v850/t-v850 -+ if test x$stabs = xyes -+ then -+ tm_file="${tm_file} dbx.h" -+ fi -+ use_collect2=no -+ c_target_objs="v850-c.o" -+ cxx_target_objs="v850-c.o" -+ ;; -+vax-*-netbsdelf*) -+ tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" -+ ;; -+vax-*-netbsd*) -+ tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h" -+ tmake_file=t-netbsd -+ extra_parts="" -+ use_collect2=yes -+ ;; -+vax-*-openbsd*) -+ tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h" -+ use_collect2=yes -+ ;; -+xstormy16-*-elf) -+ # For historical reasons, the target files omit the 'x'. -+ tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h" -+ tm_p_file=stormy16/stormy16-protos.h -+ md_file=stormy16/stormy16.md -+ out_file=stormy16/stormy16.c -+ extra_options=stormy16/stormy16.opt -+ tmake_file="stormy16/t-stormy16" -+ extra_parts="crtbegin.o crtend.o" -+ ;; -+xtensa*-*-elf*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h" -+ tmake_file="xtensa/t-xtensa xtensa/t-elf" -+ ;; -+xtensa*-*-linux*) -+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h" -+ tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux" -+ ;; -+am33_2.0-*-linux*) -+ tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h" -+ tmake_file="${tmake_file} mn10300/t-linux" -+ gas=yes gnu_ld=yes -+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" -+ use_collect2=no -+ ;; -+m32c-*-rtems*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h" -+ tmake_file="${tmake_file} t-rtems" -+ c_target_objs="m32c-pragma.o" -+ cxx_target_objs="m32c-pragma.o" -+ ;; -+m32c-*-elf*) -+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" -+ c_target_objs="m32c-pragma.o" -+ cxx_target_objs="m32c-pragma.o" -+ ;; -+*) -+ echo "*** Configuration ${target} not supported" 1>&2 -+ exit 1 -+ ;; -+esac -+ -+case ${target} in -+i[34567]86-*-linux* | x86_64-*-linux*) -+ tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386" -+ ;; -+i[34567]86-*-* | x86_64-*-*) -+ tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386" -+ ;; -+esac -+ -+# Support for --with-cpu and related options (and a few unrelated options, -+# too). -+case ${with_cpu} in -+ yes | no) -+ echo "--with-cpu must be passed a value" 1>&2 -+ exit 1 -+ ;; -+esac -+ -+# If there is no $with_cpu option, try to infer one from ${target}. -+# This block sets nothing except for with_cpu. -+if test x$with_cpu = x ; then -+ case ${target} in -+ i386-*-*) -+ with_cpu=i386 -+ ;; -+ i486-*-*) -+ with_cpu=i486 -+ ;; -+ i586-*-*) -+ case ${target_noncanonical} in -+ k6_2-*) -+ with_cpu=k6-2 -+ ;; -+ k6_3-*) -+ with_cpu=k6-3 -+ ;; -+ k6-*) -+ with_cpu=k6 -+ ;; -+ pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) -+ with_cpu=pentium-mmx -+ ;; -+ *) -+ with_cpu=pentium -+ ;; -+ esac -+ ;; -+ i686-*-* | i786-*-*) -+ case ${target_noncanonical} in -+ amdfam10-*|barcelona-*) -+ with_cpu=amdfam10 -+ ;; -+ k8-*|opteron-*|athlon_64-*) -+ with_cpu=k8 -+ ;; -+ athlon_xp-*|athlon_mp-*|athlon_4-*) -+ with_cpu=athlon-4 -+ ;; -+ athlon_tbird-*|athlon-*) -+ with_cpu=athlon -+ ;; -+ geode-*) -+ with_cpu=geode -+ ;; -+ pentium2-*) -+ with_cpu=pentium2 -+ ;; -+ pentium3-*|pentium3m-*) -+ with_cpu=pentium3 -+ ;; -+ pentium4-*|pentium4m-*) -+ with_cpu=pentium4 -+ ;; -+ prescott-*) -+ with_cpu=prescott -+ ;; -+ nocona-*) -+ with_cpu=nocona -+ ;; -+ core2-*) -+ with_cpu=core2 -+ ;; -+ pentium_m-*) -+ with_cpu=pentium-m -+ ;; -+ pentiumpro-*) -+ with_cpu=pentiumpro -+ ;; -+ *) -+ with_cpu=generic -+ ;; -+ esac -+ ;; -+ x86_64-*-*) -+ case ${target_noncanonical} in -+ amdfam10-*|barcelona-*) -+ with_cpu=amdfam10 -+ ;; -+ k8-*|opteron-*|athlon_64-*) -+ with_cpu=k8 -+ ;; -+ nocona-*) -+ with_cpu=nocona -+ ;; -+ core2-*) -+ with_cpu=core2 -+ ;; -+ *) -+ with_cpu=generic -+ ;; -+ esac -+ ;; -+ alphaev6[78]*-*-*) -+ with_cpu=ev67 -+ ;; -+ alphaev6*-*-*) -+ with_cpu=ev6 -+ ;; -+ alphapca56*-*-*) -+ with_cpu=pca56 -+ ;; -+ alphaev56*-*-*) -+ with_cpu=ev56 -+ ;; -+ alphaev5*-*-*) -+ with_cpu=ev5 -+ ;; -+ frv-*-*linux* | frv400-*-*linux*) -+ with_cpu=fr400 -+ ;; -+ frv550-*-*linux*) -+ with_cpu=fr550 -+ ;; -+ m68k*-*-*) -+ case "$with_arch" in -+ "cf") -+ with_cpu=${default_cf_cpu} -+ ;; -+ "" | "m68k") -+ with_cpu=m${default_m68k_cpu} -+ ;; -+ esac -+ ;; -+ mips*-*-vxworks) -+ with_arch=mips2 -+ ;; -+ sparc*-*-*) -+ with_cpu="`echo ${target} | sed 's/-.*$//'`" -+ ;; -+ esac -+ -+ # Avoid overriding --with-cpu-32 and --with-cpu-64 values. -+ case ${target} in -+ i[34567]86-*-*|x86_64-*-*) -+ if test x$with_cpu != x; then -+ if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then -+ if test x$with_cpu_32 = x; then -+ with_cpu_32=$with_cpu -+ fi -+ if test x$with_cpu_64 = x; then -+ with_cpu_64=$with_cpu -+ fi -+ with_cpu= -+ fi -+ fi -+ ;; -+ esac -+fi -+ -+# Similarly for --with-schedule. -+if test x$with_schedule = x; then -+ case ${target} in -+ hppa1*) -+ # Override default PA8000 scheduling model. -+ with_schedule=7100LC -+ ;; -+ esac -+fi -+ -+# Validate and mark as valid any --with options supported -+# by this target. In order to use a particular --with option -+# you must list it in supported_defaults; validating the value -+# is optional. This case statement should set nothing besides -+# supported_defaults. -+ -+supported_defaults= -+case "${target}" in -+ alpha*-*-*) -+ supported_defaults="cpu tune" -+ for which in cpu tune; do -+ eval "val=\$with_$which" -+ case "$val" in -+ "" \ -+ | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ -+ | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ -+ | 21264a) -+ ;; -+ *) -+ echo "Unknown CPU used in --with-$which=$val" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ -+ arm*-*-*) -+ supported_defaults="arch cpu float tune fpu abi mode" -+ for which in cpu tune; do -+ # See if it matches any of the entries in arm-cores.def -+ eval "val=\$with_$which" -+ if [ x"$val" = x ] \ -+ || grep "^ARM_CORE(\"$val\"," \ -+ ${srcdir}/config/arm/arm-cores.def \ -+ > /dev/null; then -+ # Ok -+ new_val=`grep "^ARM_CORE(\"$val\"," \ -+ ${srcdir}/config/arm/arm-cores.def | \ -+ sed -e 's/^[^,]*,[ ]*//' | \ -+ sed -e 's/,.*$//'` -+ eval "target_${which}_cname=$new_val" -+ echo "For $val real value is $new_val" -+ true -+ else -+ echo "Unknown CPU used in --with-$which=$val" 1>&2 -+ exit 1 -+ fi -+ done -+ -+ case "$with_arch" in -+ "" \ -+ | armv[23456] | armv2a | armv3m | armv4t | armv5t \ -+ | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \ -+ | armv7 | armv7-a | armv7-r | armv7-m \ -+ | iwmmxt | ep9312) -+ # OK -+ ;; -+ *) -+ echo "Unknown arch used in --with-arch=$with_arch" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case "$with_float" in -+ "" \ -+ | soft | hard | softfp) -+ # OK -+ ;; -+ *) -+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case "$with_fpu" in -+ "" \ -+ | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon ) -+ # OK -+ ;; -+ *) -+ echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1 -+ exit 1 -+ ;; -+ esac -+ -+ case "$with_abi" in -+ "" \ -+ | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux ) -+ #OK -+ ;; -+ *) -+ echo "Unknown ABI used in --with-abi=$with_abi" -+ exit 1 -+ ;; -+ esac -+ -+ case "$with_mode" in -+ "" \ -+ | arm | thumb ) -+ #OK -+ ;; -+ *) -+ echo "Unknown mode used in --with-mode=$with_mode" -+ exit 1 -+ ;; -+ esac -+ -+ if test "x$with_arch" != x && test "x$with_cpu" != x; then -+ echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2 -+ fi -+ ;; -+ -+ fr*-*-*linux*) -+ supported_defaults=cpu -+ case "$with_cpu" in -+ fr400) ;; -+ fr550) ;; -+ *) -+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ -+ fido-*-* | m68k*-*-*) -+ supported_defaults="arch cpu" -+ case "$with_arch" in -+ "" | "m68k"| "cf") -+ m68k_arch_family="$with_arch" -+ ;; -+ *) -+ echo "Invalid --with-arch=$with_arch" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ # We always have a $with_cpu setting here. -+ case "$with_cpu" in -+ "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060") -+ m68k_cpu_ident=$with_cpu -+ ;; -+ "m68020-40") -+ m68k_cpu_ident=m68020 -+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40" -+ ;; -+ "m68020-60") -+ m68k_cpu_ident=m68020 -+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60" -+ ;; -+ *) -+ # We need the C identifier rather than the string. -+ m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \ -+ 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \ -+ $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \ -+ ${srcdir}/config/m68k/m68k-devices.def` -+ if [ x"$m68k_cpu_ident" = x ] ; then -+ echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2 -+ exit 1 -+ fi -+ with_cpu="mcpu=$with_cpu" -+ ;; -+ esac -+ ;; -+ -+ hppa*-*-*) -+ supported_defaults="arch schedule" -+ -+ case "$with_arch" in -+ "" | 1.0 | 1.1 | 2.0) -+ # OK -+ ;; -+ *) -+ echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case "$with_schedule" in -+ "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) -+ # OK -+ ;; -+ *) -+ echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ -+ i[34567]86-*-* | x86_64-*-*) -+ supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64" -+ for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do -+ eval "val=\$with_$which" -+ case ${val} in -+ i386 | i486 \ -+ | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \ -+ | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \ -+ | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \ -+ | athlon-4 | athlon-xp | athlon-mp | geode \ -+ | prescott | pentium-m | pentium4m | pentium3m) -+ case "${target}" in -+ x86_64-*-*) -+ case "x$which" in -+ *_32) -+ ;; -+ *) -+ echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ esac -+ # OK -+ ;; -+ "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic) -+ # OK -+ ;; -+ *) -+ echo "Unknown CPU given in --with-$which=$val." 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ -+ mips*-*-*) -+ supported_defaults="abi arch float tune divide llsc mips-plt" -+ -+ case ${with_float} in -+ "" | soft | hard) -+ # OK -+ ;; -+ *) -+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case ${with_abi} in -+ "" | 32 | o64 | n32 | 64 | eabi) -+ # OK -+ ;; -+ *) -+ echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case ${with_divide} in -+ "" | breaks | traps) -+ # OK -+ ;; -+ *) -+ echo "Unknown division check type use in --with-divide=$with_divide" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case ${with_llsc} in -+ yes) -+ with_llsc=llsc -+ ;; -+ no) -+ with_llsc="no-llsc" -+ ;; -+ "") -+ # OK -+ ;; -+ *) -+ echo "Unknown llsc type used in --with-llsc" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case ${with_mips_plt} in -+ yes) -+ with_mips_plt=plt -+ ;; -+ no) -+ with_mips_plt=no-plt -+ ;; -+ "") -+ ;; -+ *) -+ echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ -+ powerpc*-*-* | rs6000-*-*) -+ supported_defaults="cpu float tune" -+ -+ for which in cpu tune; do -+ eval "val=\$with_$which" -+ case ${val} in -+ default32 | default64) -+ with_which="with_$which" -+ eval $with_which= -+ ;; -+ 405cr) -+ tm_defines="${tm_defines} CONFIG_PPC405CR" -+ eval "with_$which=405" -+ ;; -+ "" | common \ -+ | power | power[234567] | power6x | powerpc | powerpc64 \ -+ | rios | rios1 | rios2 | rsc | rsc1 | rs64a \ -+ | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \ -+ | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \ -+ | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ -+ | e300c[23] | 854[08] | e500mc \ -+ | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell) -+ # OK -+ ;; -+ *) -+ echo "Unknown cpu used in --with-$which=$val." 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ -+ s390*-*-*) -+ supported_defaults="arch mode tune" -+ -+ for which in arch tune; do -+ eval "val=\$with_$which" -+ case ${val} in -+ "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10) -+ # OK -+ ;; -+ *) -+ echo "Unknown cpu used in --with-$which=$val." 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ -+ case ${with_mode} in -+ "" | esa | zarch) -+ # OK -+ ;; -+ *) -+ echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ -+ sh[123456ble]-*-* | sh-*-*) -+ supported_defaults="cpu" -+ case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in -+ "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu ) -+ # OK -+ ;; -+ m2a | m2a-single | m2a-single-only | m2a-nofpu) -+ ;; -+ m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) -+ ;; -+ *) -+ echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 -+ echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 -+ echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2 -+ echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ sparc*-*-*) -+ supported_defaults="cpu float tune" -+ -+ for which in cpu tune; do -+ eval "val=\$with_$which" -+ case ${val} in -+ "" | sparc | sparcv9 | sparc64 | sparc86x \ -+ | v7 | cypress | v8 | supersparc | sparclite | f930 \ -+ | f934 | hypersparc | sparclite86x | sparclet | tsc701 \ -+ | v9 | ultrasparc | ultrasparc3 | niagara | niagara2) -+ # OK -+ ;; -+ *) -+ echo "Unknown cpu used in --with-$which=$val" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ -+ case ${with_float} in -+ "" | soft | hard) -+ # OK -+ ;; -+ *) -+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+ -+ spu-*-*) -+ supported_defaults="arch tune" -+ -+ for which in arch tune; do -+ eval "val=\$with_$which" -+ case ${val} in -+ "" | cell | celledp) -+ # OK -+ ;; -+ *) -+ echo "Unknown cpu used in --with-$which=$val." 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ -+ v850*-*-*) -+ supported_defaults=cpu -+ case ${with_cpu} in -+ "" | v850e | v850e1) -+ # OK -+ ;; -+ *) -+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 -+ exit 1 -+ ;; -+ esac -+ ;; -+esac -+ -+# Set some miscellaneous flags for particular targets. -+target_cpu_default2= -+case ${target} in -+ alpha*-*-*) -+ if test x$gas = xyes -+ then -+ target_cpu_default2="MASK_GAS" -+ fi -+ ;; -+ -+ arm*-*-*) -+ if test x$target_cpu_cname = x -+ then -+ target_cpu_default2=TARGET_CPU_generic -+ else -+ target_cpu_default2=TARGET_CPU_$target_cpu_cname -+ fi -+ ;; -+ -+ hppa*-*-*) -+ target_cpu_default2="MASK_BIG_SWITCH" -+ if test x$gas = xyes -+ then -+ target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY" -+ fi -+ ;; -+ -+ fido*-*-* | m68k*-*-*) -+ target_cpu_default2=$m68k_cpu_ident -+ if [ x"$m68k_arch_family" != x ]; then -+ tmake_file="m68k/t-$m68k_arch_family $tmake_file" -+ fi -+ ;; -+ -+ i[34567]86-*-darwin* | x86_64-*-darwin*) -+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp" -+ ;; -+ i[34567]86-*-linux* | x86_64-*-linux* | i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu) -+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux" -+ ;; -+ ia64*-*-linux*) -+ tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp" -+ ;; -+ -+ mips*-*-*) -+ if test x$gnu_ld = xyes -+ then -+ target_cpu_default2="MASK_SPLIT_ADDRESSES" -+ fi -+ case ${target} in -+ mips*el-*-*) -+ tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" -+ ;; -+ esac -+ if test "x$enable_gofast" = xyes -+ then -+ tm_defines="US_SOFTWARE_GOFAST $tm_defines" -+ tmake_file="mips/t-gofast $tmake_file" -+ else -+ tmake_file="mips/t-mips $tmake_file" -+ fi -+ ;; -+ -+ powerpc*-*-* | rs6000-*-*) -+ # FIXME: The PowerPC port uses the value set at compile time, -+ # although it's only cosmetic. -+ if test "x$with_cpu" != x -+ then -+ target_cpu_default2="\\\"$with_cpu\\\"" -+ fi -+ out_file=rs6000/rs6000.c -+ c_target_objs="${c_target_objs} rs6000-c.o" -+ cxx_target_objs="${cxx_target_objs} rs6000-c.o" -+ tmake_file="rs6000/t-rs6000 ${tmake_file}" -+ -+ if test x$enable_e500_double = xyes -+ then -+ tm_file="$tm_file rs6000/e500-double.h" -+ fi -+ ;; -+ -+ sh[123456ble]*-*-* | sh-*-*) -+ c_target_objs="${c_target_objs} sh-c.o" -+ cxx_target_objs="${cxx_target_objs} sh-c.o" -+ ;; -+ -+ sparc*-*-*) -+ # Some standard aliases. -+ case x$with_cpu in -+ xsparc) -+ with_cpu=v7 -+ ;; -+ xsparcv9 | xsparc64) -+ with_cpu=v9 -+ ;; -+ esac -+ -+ # The SPARC port checks this value at compile-time. -+ target_cpu_default2="TARGET_CPU_$with_cpu" -+ ;; -+ v850*-*-*) -+ # FIXME: The v850 is "special" in that it does not support -+ # runtime CPU selection, only --with-cpu. -+ case "x$with_cpu" in -+ x) -+ ;; -+ xv850e) -+ target_cpu_default2="TARGET_CPU_$with_cpu" -+ ;; -+ esac -+ ;; -+esac -+ -+t= -+all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt" -+for option in $all_defaults -+do -+ eval "val=\$with_"`echo $option | sed s/-/_/g` -+ if test -n "$val"; then -+ case " $supported_defaults " in -+ *" $option "*) -+ ;; -+ *) -+ echo "This target does not support --with-$option." 2>&1 -+ echo "Valid --with options are: $supported_defaults" 2>&1 -+ exit 1 -+ ;; -+ esac -+ -+ if test "x$t" = x -+ then -+ t="{ \"$option\", \"$val\" }" -+ else -+ t="${t}, { \"$option\", \"$val\" }" -+ fi -+ fi -+done -+ -+if test "x$t" = x -+then -+ configure_default_options="{ { NULL, NULL} }" -+else -+ configure_default_options="{ ${t} }" -+fi -+ -+if test "$target_cpu_default2" != "" -+then -+ if test "$target_cpu_default" != "" -+ then -+ target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" -+ else -+ target_cpu_default=$target_cpu_default2 -+ fi -+fi -diff -Naur gcc-4.4.2.orig/gcc/doc/contrib.texi gcc-4.4.2-rtems4.10-20091015/gcc/doc/contrib.texi +diff -Naur gcc-4.4.2.orig/gcc/doc/contrib.texi gcc-4.4.2/gcc/doc/contrib.texi --- gcc-4.4.2.orig/gcc/doc/contrib.texi 2009-02-20 16:20:38.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/doc/contrib.texi 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/doc/contrib.texi 2009-10-15 18:36:00.000000000 +0200 @@ -55,7 +55,7 @@ Wolfgang Bangerth for processing tons of bug reports. @@ -7322,9 +4135,9 @@ diff -Naur gcc-4.4.2.orig/gcc/doc/contrib.texi gcc-4.4.2-rtems4.10-20091015/gcc/ @item Daniel Berlin for better DWARF2 support, faster/better optimizations, -diff -Naur gcc-4.4.2.orig/gcc/doc/install.texi gcc-4.4.2-rtems4.10-20091015/gcc/doc/install.texi +diff -Naur gcc-4.4.2.orig/gcc/doc/install.texi gcc-4.4.2/gcc/doc/install.texi --- gcc-4.4.2.orig/gcc/doc/install.texi 2009-09-12 20:57:06.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/doc/install.texi 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/doc/install.texi 2009-10-15 18:36:00.000000000 +0200 @@ -2658,6 +2658,10 @@ @item @uref{#iq2000-x-elf,,iq2000-*-elf} @@ -7357,4337 +4170,9 @@ diff -Naur gcc-4.4.2.orig/gcc/doc/install.texi gcc-4.4.2-rtems4.10-20091015/gcc/ @heading @anchor{m32c-x-elf}m32c-*-elf Renesas M32C processor. This configuration is intended for embedded systems. -diff -Naur gcc-4.4.2.orig/gcc/doc/install.texi.orig gcc-4.4.2-rtems4.10-20091015/gcc/doc/install.texi.orig ---- gcc-4.4.2.orig/gcc/doc/install.texi.orig 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/doc/install.texi.orig 2009-10-15 18:36:00.000000000 +0200 -@@ -0,0 +1,4324 @@ -+\input texinfo.tex @c -*-texinfo-*- -+@c @ifnothtml -+@c %**start of header -+@setfilename gccinstall.info -+@settitle Installing GCC -+@setchapternewpage odd -+@c %**end of header -+@c @end ifnothtml -+ -+@include gcc-common.texi -+ -+@c Specify title for specific html page -+@ifset indexhtml -+@settitle Installing GCC -+@end ifset -+@ifset specifichtml -+@settitle Host/Target specific installation notes for GCC -+@end ifset -+@ifset prerequisiteshtml -+@settitle Prerequisites for GCC -+@end ifset -+@ifset downloadhtml -+@settitle Downloading GCC -+@end ifset -+@ifset configurehtml -+@settitle Installing GCC: Configuration -+@end ifset -+@ifset buildhtml -+@settitle Installing GCC: Building -+@end ifset -+@ifset testhtml -+@settitle Installing GCC: Testing -+@end ifset -+@ifset finalinstallhtml -+@settitle Installing GCC: Final installation -+@end ifset -+@ifset binarieshtml -+@settitle Installing GCC: Binaries -+@end ifset -+@ifset oldhtml -+@settitle Installing GCC: Old documentation -+@end ifset -+@ifset gfdlhtml -+@settitle Installing GCC: GNU Free Documentation License -+@end ifset -+ -+@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, -+@c 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -+@c *** Converted to texinfo by Dean Wakerley, dean@wakerley.com -+ -+@c IMPORTANT: whenever you modify this file, run `install.texi2html' to -+@c test the generation of HTML documents for the gcc.gnu.org web pages. -+@c -+@c Do not use @footnote{} in this file as it breaks install.texi2html! -+ -+@c Include everything if we're not making html -+@ifnothtml -+@set indexhtml -+@set specifichtml -+@set prerequisiteshtml -+@set downloadhtml -+@set configurehtml -+@set buildhtml -+@set testhtml -+@set finalinstallhtml -+@set binarieshtml -+@set oldhtml -+@set gfdlhtml -+@end ifnothtml -+ -+@c Part 2 Summary Description and Copyright -+@copying -+Copyright @copyright{} 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, -+1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, -+2008 Free Software Foundation, Inc. -+@sp 1 -+Permission is granted to copy, distribute and/or modify this document -+under the terms of the GNU Free Documentation License, Version 1.2 or -+any later version published by the Free Software Foundation; with no -+Invariant Sections, the Front-Cover texts being (a) (see below), and -+with the Back-Cover Texts being (b) (see below). A copy of the -+license is included in the section entitled ``@uref{./gfdl.html,,GNU -+Free Documentation License}''. -+ -+(a) The FSF's Front-Cover Text is: -+ -+ A GNU Manual -+ -+(b) The FSF's Back-Cover Text is: -+ -+ You have freedom to copy and modify this GNU Manual, like GNU -+ software. Copies published by the Free Software Foundation raise -+ funds for GNU development. -+@end copying -+@ifinfo -+@insertcopying -+@end ifinfo -+@dircategory Software development -+@direntry -+* gccinstall: (gccinstall). Installing the GNU Compiler Collection. -+@end direntry -+ -+@c Part 3 Titlepage and Copyright -+@titlepage -+@title Installing GCC -+@versionsubtitle -+ -+@c The following two commands start the copyright page. -+@page -+@vskip 0pt plus 1filll -+@insertcopying -+@end titlepage -+ -+@c Part 4 Top node, Master Menu, and/or Table of Contents -+@ifinfo -+@node Top, , , (dir) -+@comment node-name, next, Previous, up -+ -+@menu -+* Installing GCC:: This document describes the generic installation -+ procedure for GCC as well as detailing some target -+ specific installation instructions. -+ -+* Specific:: Host/target specific installation notes for GCC. -+* Binaries:: Where to get pre-compiled binaries. -+ -+* Old:: Old installation documentation. -+ -+* GNU Free Documentation License:: How you can copy and share this manual. -+* Concept Index:: This index has two entries. -+@end menu -+@end ifinfo -+ -+@iftex -+@contents -+@end iftex -+ -+@c Part 5 The Body of the Document -+@c ***Installing GCC********************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Installing GCC, Binaries, , Top -+@end ifnothtml -+@ifset indexhtml -+@ifnothtml -+@chapter Installing GCC -+@end ifnothtml -+ -+The latest version of this document is always available at -+@uref{http://gcc.gnu.org/install/,,http://gcc.gnu.org/install/}. -+ -+This document describes the generic installation procedure for GCC as well -+as detailing some target specific installation instructions. -+ -+GCC includes several components that previously were separate distributions -+with their own installation instructions. This document supersedes all -+package specific installation instructions. -+ -+@emph{Before} starting the build/install procedure please check the -+@ifnothtml -+@ref{Specific, host/target specific installation notes}. -+@end ifnothtml -+@ifhtml -+@uref{specific.html,,host/target specific installation notes}. -+@end ifhtml -+We recommend you browse the entire generic installation instructions before -+you proceed. -+ -+Lists of successful builds for released versions of GCC are -+available at @uref{http://gcc.gnu.org/buildstat.html}. -+These lists are updated as new information becomes available. -+ -+The installation procedure itself is broken into five steps. -+ -+@ifinfo -+@menu -+* Prerequisites:: -+* Downloading the source:: -+* Configuration:: -+* Building:: -+* Testing:: (optional) -+* Final install:: -+@end menu -+@end ifinfo -+@ifhtml -+@enumerate -+@item -+@uref{prerequisites.html,,Prerequisites} -+@item -+@uref{download.html,,Downloading the source} -+@item -+@uref{configure.html,,Configuration} -+@item -+@uref{build.html,,Building} -+@item -+@uref{test.html,,Testing} (optional) -+@item -+@uref{finalinstall.html,,Final install} -+@end enumerate -+@end ifhtml -+ -+Please note that GCC does not support @samp{make uninstall} and probably -+won't do so in the near future as this would open a can of worms. Instead, -+we suggest that you install GCC into a directory of its own and simply -+remove that directory when you do not need that specific version of GCC -+any longer, and, if shared libraries are installed there as well, no -+more binaries exist that use them. -+ -+@ifhtml -+There are also some @uref{old.html,,old installation instructions}, -+which are mostly obsolete but still contain some information which has -+not yet been merged into the main part of this manual. -+@end ifhtml -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+ -+@insertcopying -+@end ifhtml -+@end ifset -+ -+@c ***Prerequisites************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Prerequisites, Downloading the source, , Installing GCC -+@end ifnothtml -+@ifset prerequisiteshtml -+@ifnothtml -+@chapter Prerequisites -+@end ifnothtml -+@cindex Prerequisites -+ -+GCC requires that various tools and packages be available for use in the -+build procedure. Modifying GCC sources requires additional tools -+described below. -+ -+@heading Tools/packages necessary for building GCC -+@table @asis -+@item ISO C90 compiler -+Necessary to bootstrap GCC, although versions of GCC prior -+to 3.4 also allow bootstrapping with a traditional (K&R) C compiler. -+ -+To build all languages in a cross-compiler or other configuration where -+3-stage bootstrap is not performed, you need to start with an existing -+GCC binary (version 2.95 or later) because source code for language -+frontends other than C might use GCC extensions. -+ -+@item GNAT -+ -+In order to build the Ada compiler (GNAT) you must already have GNAT -+installed because portions of the Ada frontend are written in Ada (with -+GNAT extensions.) Refer to the Ada installation instructions for more -+specific information. -+ -+@item A ``working'' POSIX compatible shell, or GNU bash -+ -+Necessary when running @command{configure} because some -+@command{/bin/sh} shells have bugs and may crash when configuring the -+target libraries. In other cases, @command{/bin/sh} or @command{ksh} -+have disastrous corner-case performance problems. This -+can cause target @command{configure} runs to literally take days to -+complete in some cases. -+ -+So on some platforms @command{/bin/ksh} is sufficient, on others it -+isn't. See the host/target specific instructions for your platform, or -+use @command{bash} to be sure. Then set @env{CONFIG_SHELL} in your -+environment to your ``good'' shell prior to running -+@command{configure}/@command{make}. -+ -+@command{zsh} is not a fully compliant POSIX shell and will not -+work when configuring GCC@. -+ -+@item A POSIX or SVR4 awk -+ -+Necessary for creating some of the generated source files for GCC@. -+If in doubt, use a recent GNU awk version, as some of the older ones -+are broken. GNU awk version 3.1.5 is known to work. -+ -+@item GNU binutils -+ -+Necessary in some circumstances, optional in others. See the -+host/target specific instructions for your platform for the exact -+requirements. -+ -+@item gzip version 1.2.4 (or later) or -+@itemx bzip2 version 1.0.2 (or later) -+ -+Necessary to uncompress GCC @command{tar} files when source code is -+obtained via FTP mirror sites. -+ -+@item GNU make version 3.80 (or later) -+ -+You must have GNU make installed to build GCC@. -+ -+@item GNU tar version 1.14 (or later) -+ -+Necessary (only on some platforms) to untar the source code. Many -+systems' @command{tar} programs will also work, only try GNU -+@command{tar} if you have problems. -+ -+@item GNU Multiple Precision Library (GMP) version 4.1 (or later) -+ -+Necessary to build GCC@. If you do not have it installed in your -+library search path, you will have to configure with the -+@option{--with-gmp} configure option. See also @option{--with-gmp-lib} -+and @option{--with-gmp-include}. Alternatively, if a GMP source -+distribution is found in a subdirectory of your GCC sources named -+@file{gmp}, it will be built together with GCC@. -+ -+@item MPFR Library version 2.3.2 (or later) -+ -+Necessary to build GCC@. It can be downloaded from -+@uref{http://www.mpfr.org/}. The version of MPFR that is bundled with -+GMP 4.1.x contains numerous bugs. Although GCC may appear to function -+with the buggy versions of MPFR, there are a few bugs that will not be -+fixed when using this version. It is strongly recommended to upgrade -+to the recommended version of MPFR. -+ -+The @option{--with-mpfr} configure option should be used if your MPFR -+Library is not installed in your default library search path. See also -+@option{--with-mpfr-lib} and @option{--with-mpfr-include}. -+Alternatively, if a MPFR source distribution is found in a subdirectory -+of your GCC sources named @file{mpfr}, it will be built together with -+GCC@. -+ -+@item Parma Polyhedra Library (PPL) version 0.10 -+ -+Necessary to build GCC with the Graphite loop optimizations. -+It can be downloaded from @uref{http://www.cs.unipr.it/ppl/Download/}. -+ -+The @option{--with-ppl} configure option should be used if PPL is not -+installed in your default library search path. -+ -+@item CLooG-PPL version 0.15 -+ -+Necessary to build GCC with the Graphite loop optimizations. It can -+be downloaded from @uref{ftp://gcc.gnu.org/pub/gcc/infrastructure/}. -+The code in @file{cloog-ppl-0.15.tar.gz} comes from a branch of CLooG -+available from @uref{http://repo.or.cz/w/cloog-ppl.git}. CLooG-PPL -+should be configured with @option{--with-ppl}. -+ -+The @option{--with-cloog} configure option should be used if CLooG is -+not installed in your default library search path. -+ -+@item @command{jar}, or InfoZIP (@command{zip} and @command{unzip}) -+ -+Necessary to build libgcj, the GCJ runtime. -+ -+@end table -+ -+ -+@heading Tools/packages necessary for modifying GCC -+@table @asis -+@item autoconf version 2.59 -+@itemx GNU m4 version 1.4 (or later) -+ -+Necessary when modifying @file{configure.ac}, @file{aclocal.m4}, etc.@: -+to regenerate @file{configure} and @file{config.in} files. -+ -+@item automake version 1.9.6 -+ -+Necessary when modifying a @file{Makefile.am} file to regenerate its -+associated @file{Makefile.in}. -+ -+Much of GCC does not use automake, so directly edit the @file{Makefile.in} -+file. Specifically this applies to the @file{gcc}, @file{intl}, -+@file{libcpp}, @file{libiberty}, @file{libobjc} directories as well -+as any of their subdirectories. -+ -+For directories that use automake, GCC requires the latest release in -+the 1.9.x series, which is currently 1.9.6. When regenerating a directory -+to a newer version, please update all the directories using an older 1.9.x -+to the latest released version. -+ -+@item gettext version 0.14.5 (or later) -+ -+Needed to regenerate @file{gcc.pot}. -+ -+@item gperf version 2.7.2 (or later) -+ -+Necessary when modifying @command{gperf} input files, e.g.@: -+@file{gcc/cp/cfns.gperf} to regenerate its associated header file, e.g.@: -+@file{gcc/cp/cfns.h}. -+ -+@item DejaGnu 1.4.4 -+@itemx Expect -+@itemx Tcl -+ -+Necessary to run the GCC testsuite; see the section on testing for details. -+ -+@item autogen version 5.5.4 (or later) and -+@itemx guile version 1.4.1 (or later) -+ -+Necessary to regenerate @file{fixinc/fixincl.x} from -+@file{fixinc/inclhack.def} and @file{fixinc/*.tpl}. -+ -+Necessary to run @samp{make check} for @file{fixinc}. -+ -+Necessary to regenerate the top level @file{Makefile.in} file from -+@file{Makefile.tpl} and @file{Makefile.def}. -+ -+@item Flex version 2.5.4 (or later) -+ -+Necessary when modifying @file{*.l} files. -+ -+Necessary to build GCC during development because the generated output -+files are not included in the SVN repository. They are included in -+releases. -+ -+@item Texinfo version 4.7 (or later) -+ -+Necessary for running @command{makeinfo} when modifying @file{*.texi} -+files to test your changes. -+ -+Necessary for running @command{make dvi} or @command{make pdf} to -+create printable documentation in DVI or PDF format. Texinfo version -+4.8 or later is required for @command{make pdf}. -+ -+Necessary to build GCC documentation during development because the -+generated output files are not included in the SVN repository. They are -+included in releases. -+ -+@item @TeX{} (any working version) -+ -+Necessary for running @command{texi2dvi} and @command{texi2pdf}, which -+are used when running @command{make dvi} or @command{make pdf} to create -+DVI or PDF files, respectively. -+ -+@item SVN (any version) -+@itemx SSH (any version) -+ -+Necessary to access the SVN repository. Public releases and weekly -+snapshots of the development sources are also available via FTP@. -+ -+@item Perl version 5.6.1 (or later) -+ -+Necessary when regenerating @file{Makefile} dependencies in libiberty. -+Necessary when regenerating @file{libiberty/functions.texi}. -+Necessary when generating manpages from Texinfo manuals. -+Necessary when targetting Darwin, building libstdc++, -+and not using @option{--disable-symvers}. -+Used by various scripts to generate some files included in SVN (mainly -+Unicode-related and rarely changing) from source tables. -+ -+@item GNU diffutils version 2.7 (or later) -+ -+Useful when submitting patches for the GCC source code. -+ -+@item patch version 2.5.4 (or later) -+ -+Necessary when applying patches, created with @command{diff}, to one's -+own sources. -+ -+@item ecj1 -+@itemx gjavah -+ -+If you wish to modify @file{.java} files in libjava, you will need to -+configure with @option{--enable-java-maintainer-mode}, and you will need -+to have executables named @command{ecj1} and @command{gjavah} in your path. -+The @command{ecj1} executable should run the Eclipse Java compiler via -+the GCC-specific entry point. You can download a suitable jar from -+@uref{ftp://sourceware.org/pub/java/}, or by running the script -+@command{contrib/download_ecj}. -+ -+@item antlr.jar version 2.7.1 (or later) -+@itemx antlr binary -+ -+If you wish to build the @command{gjdoc} binary in libjava, you will -+need to have a @file{antlr.jar} library available. The library is -+searched in system locations but can be configured with -+@option{--with-antlr-jar=} instead. When configuring with -+@option{--enable-java-maintainer-mode}, you will need to have one of -+the executables named @command{cantlr}, @command{runantlr} or -+@command{antlr} in your path. -+ -+@end table -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Downloading the source************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Downloading the source, Configuration, Prerequisites, Installing GCC -+@end ifnothtml -+@ifset downloadhtml -+@ifnothtml -+@chapter Downloading GCC -+@end ifnothtml -+@cindex Downloading GCC -+@cindex Downloading the Source -+ -+GCC is distributed via @uref{http://gcc.gnu.org/svn.html,,SVN} and FTP -+tarballs compressed with @command{gzip} or -+@command{bzip2}. It is possible to download a full distribution or specific -+components. -+ -+Please refer to the @uref{http://gcc.gnu.org/releases.html,,releases web page} -+for information on how to obtain GCC@. -+ -+The full distribution includes the C, C++, Objective-C, Fortran, Java, -+and Ada (in the case of GCC 3.1 and later) compilers. The full -+distribution also includes runtime libraries for C++, Objective-C, -+Fortran, and Java. In GCC 3.0 and later versions, the GNU compiler -+testsuites are also included in the full distribution. -+ -+If you choose to download specific components, you must download the core -+GCC distribution plus any language specific distributions you wish to -+use. The core distribution includes the C language front end as well as the -+shared components. Each language has a tarball which includes the language -+front end as well as the language runtime (when appropriate). -+ -+Unpack the core distribution as well as any language specific -+distributions in the same directory. -+ -+If you also intend to build binutils (either to upgrade an existing -+installation or for use in place of the corresponding tools of your -+OS), unpack the binutils distribution either in the same directory or -+a separate one. In the latter case, add symbolic links to any -+components of the binutils you intend to build alongside the compiler -+(@file{bfd}, @file{binutils}, @file{gas}, @file{gprof}, @file{ld}, -+@file{opcodes}, @dots{}) to the directory containing the GCC sources. -+ -+Likewise, the GMP and MPFR libraries can be automatically built together -+with GCC. Unpack the GMP and/or MPFR source distributions in the -+directory containing the GCC sources and rename their directories to -+@file{gmp} and @file{mpfr}, respectively (or use symbolic links with the -+same name). -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Configuration*********************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Configuration, Building, Downloading the source, Installing GCC -+@end ifnothtml -+@ifset configurehtml -+@ifnothtml -+@chapter Installing GCC: Configuration -+@end ifnothtml -+@cindex Configuration -+@cindex Installing GCC: Configuration -+ -+Like most GNU software, GCC must be configured before it can be built. -+This document describes the recommended configuration procedure -+for both native and cross targets. -+ -+We use @var{srcdir} to refer to the toplevel source directory for -+GCC; we use @var{objdir} to refer to the toplevel build/object directory. -+ -+If you obtained the sources via SVN, @var{srcdir} must refer to the top -+@file{gcc} directory, the one where the @file{MAINTAINERS} can be found, -+and not its @file{gcc} subdirectory, otherwise the build will fail. -+ -+If either @var{srcdir} or @var{objdir} is located on an automounted NFS -+file system, the shell's built-in @command{pwd} command will return -+temporary pathnames. Using these can lead to various sorts of build -+problems. To avoid this issue, set the @env{PWDCMD} environment -+variable to an automounter-aware @command{pwd} command, e.g., -+@command{pawd} or @samp{amq -w}, during the configuration and build -+phases. -+ -+First, we @strong{highly} recommend that GCC be built into a -+separate directory than the sources which does @strong{not} reside -+within the source tree. This is how we generally build GCC; building -+where @var{srcdir} == @var{objdir} should still work, but doesn't -+get extensive testing; building where @var{objdir} is a subdirectory -+of @var{srcdir} is unsupported. -+ -+If you have previously built GCC in the same directory for a -+different target machine, do @samp{make distclean} to delete all files -+that might be invalid. One of the files this deletes is @file{Makefile}; -+if @samp{make distclean} complains that @file{Makefile} does not exist -+or issues a message like ``don't know how to make distclean'' it probably -+means that the directory is already suitably clean. However, with the -+recommended method of building in a separate @var{objdir}, you should -+simply use a different @var{objdir} for each target. -+ -+Second, when configuring a native system, either @command{cc} or -+@command{gcc} must be in your path or you must set @env{CC} in -+your environment before running configure. Otherwise the configuration -+scripts may fail. -+ -+@ignore -+Note that the bootstrap compiler and the resulting GCC must be link -+compatible, else the bootstrap will fail with linker errors about -+incompatible object file formats. Several multilibed targets are -+affected by this requirement, see -+@ifnothtml -+@ref{Specific, host/target specific installation notes}. -+@end ifnothtml -+@ifhtml -+@uref{specific.html,,host/target specific installation notes}. -+@end ifhtml -+@end ignore -+ -+To configure GCC: -+ -+@smallexample -+ % mkdir @var{objdir} -+ % cd @var{objdir} -+ % @var{srcdir}/configure [@var{options}] [@var{target}] -+@end smallexample -+ -+@heading Distributor options -+ -+If you will be distributing binary versions of GCC, with modifications -+to the source code, you should use the options described in this -+section to make clear that your version contains modifications. -+ -+@table @code -+@item --with-pkgversion=@var{version} -+Specify a string that identifies your package. You may wish -+to include a build number or build date. This version string will be -+included in the output of @command{gcc --version}. This suffix does -+not replace the default version string, only the @samp{GCC} part. -+ -+The default value is @samp{GCC}. -+ -+@item --with-bugurl=@var{url} -+Specify the URL that users should visit if they wish to report a bug. -+You are of course welcome to forward bugs reported to you to the FSF, -+if you determine that they are not bugs in your modifications. -+ -+The default value refers to the FSF's GCC bug tracker. -+ -+@end table -+ -+@heading Target specification -+@itemize @bullet -+@item -+GCC has code to correctly determine the correct value for @var{target} -+for nearly all native systems. Therefore, we highly recommend you not -+provide a configure target when configuring a native compiler. -+ -+@item -+@var{target} must be specified as @option{--target=@var{target}} -+when configuring a cross compiler; examples of valid targets would be -+m68k-coff, sh-elf, etc. -+ -+@item -+Specifying just @var{target} instead of @option{--target=@var{target}} -+implies that the host defaults to @var{target}. -+@end itemize -+ -+ -+@heading Options specification -+ -+Use @var{options} to override several configure time options for -+GCC@. A list of supported @var{options} follows; @samp{configure -+--help} may list other options, but those not listed below may not -+work and should not normally be used. -+ -+Note that each @option{--enable} option has a corresponding -+@option{--disable} option and that each @option{--with} option has a -+corresponding @option{--without} option. -+ -+@table @code -+@item --prefix=@var{dirname} -+Specify the toplevel installation -+directory. This is the recommended way to install the tools into a directory -+other than the default. The toplevel installation directory defaults to -+@file{/usr/local}. -+ -+We @strong{highly} recommend against @var{dirname} being the same or a -+subdirectory of @var{objdir} or vice versa. If specifying a directory -+beneath a user's home directory tree, some shells will not expand -+@var{dirname} correctly if it contains the @samp{~} metacharacter; use -+@env{$HOME} instead. -+ -+The following standard @command{autoconf} options are supported. Normally you -+should not need to use these options. -+@table @code -+@item --exec-prefix=@var{dirname} -+Specify the toplevel installation directory for architecture-dependent -+files. The default is @file{@var{prefix}}. -+ -+@item --bindir=@var{dirname} -+Specify the installation directory for the executables called by users -+(such as @command{gcc} and @command{g++}). The default is -+@file{@var{exec-prefix}/bin}. -+ -+@item --libdir=@var{dirname} -+Specify the installation directory for object code libraries and -+internal data files of GCC@. The default is @file{@var{exec-prefix}/lib}. -+ -+@item --libexecdir=@var{dirname} -+Specify the installation directory for internal executables of GCC@. -+The default is @file{@var{exec-prefix}/libexec}. -+ -+@item --with-slibdir=@var{dirname} -+Specify the installation directory for the shared libgcc library. The -+default is @file{@var{libdir}}. -+ -+@item --infodir=@var{dirname} -+Specify the installation directory for documentation in info format. -+The default is @file{@var{prefix}/info}. -+ -+@item --datadir=@var{dirname} -+Specify the installation directory for some architecture-independent -+data files referenced by GCC@. The default is @file{@var{prefix}/share}. -+ -+@item --mandir=@var{dirname} -+Specify the installation directory for manual pages. The default is -+@file{@var{prefix}/man}. (Note that the manual pages are only extracts from -+the full GCC manuals, which are provided in Texinfo format. The manpages -+are derived by an automatic conversion process from parts of the full -+manual.) -+ -+@item --with-gxx-include-dir=@var{dirname} -+Specify -+the installation directory for G++ header files. The default is -+@file{@var{prefix}/include/c++/@var{version}}. -+ -+@end table -+ -+@item --program-prefix=@var{prefix} -+GCC supports some transformations of the names of its programs when -+installing them. This option prepends @var{prefix} to the names of -+programs to install in @var{bindir} (see above). For example, specifying -+@option{--program-prefix=foo-} would result in @samp{gcc} -+being installed as @file{/usr/local/bin/foo-gcc}. -+ -+@item --program-suffix=@var{suffix} -+Appends @var{suffix} to the names of programs to install in @var{bindir} -+(see above). For example, specifying @option{--program-suffix=-3.1} -+would result in @samp{gcc} being installed as -+@file{/usr/local/bin/gcc-3.1}. -+ -+@item --program-transform-name=@var{pattern} -+Applies the @samp{sed} script @var{pattern} to be applied to the names -+of programs to install in @var{bindir} (see above). @var{pattern} has to -+consist of one or more basic @samp{sed} editing commands, separated by -+semicolons. For example, if you want the @samp{gcc} program name to be -+transformed to the installed program @file{/usr/local/bin/myowngcc} and -+the @samp{g++} program name to be transformed to -+@file{/usr/local/bin/gspecial++} without changing other program names, -+you could use the pattern -+@option{--program-transform-name='s/^gcc$/myowngcc/; s/^g++$/gspecial++/'} -+to achieve this effect. -+ -+All three options can be combined and used together, resulting in more -+complex conversion patterns. As a basic rule, @var{prefix} (and -+@var{suffix}) are prepended (appended) before further transformations -+can happen with a special transformation script @var{pattern}. -+ -+As currently implemented, this option only takes effect for native -+builds; cross compiler binaries' names are not transformed even when a -+transformation is explicitly asked for by one of these options. -+ -+For native builds, some of the installed programs are also installed -+with the target alias in front of their name, as in -+@samp{i686-pc-linux-gnu-gcc}. All of the above transformations happen -+before the target alias is prepended to the name---so, specifying -+@option{--program-prefix=foo-} and @option{program-suffix=-3.1}, the -+resulting binary would be installed as -+@file{/usr/local/bin/i686-pc-linux-gnu-foo-gcc-3.1}. -+ -+As a last shortcoming, none of the installed Ada programs are -+transformed yet, which will be fixed in some time. -+ -+@item --with-local-prefix=@var{dirname} -+Specify the -+installation directory for local include files. The default is -+@file{/usr/local}. Specify this option if you want the compiler to -+search directory @file{@var{dirname}/include} for locally installed -+header files @emph{instead} of @file{/usr/local/include}. -+ -+You should specify @option{--with-local-prefix} @strong{only} if your -+site has a different convention (not @file{/usr/local}) for where to put -+site-specific files. -+ -+The default value for @option{--with-local-prefix} is @file{/usr/local} -+regardless of the value of @option{--prefix}. Specifying -+@option{--prefix} has no effect on which directory GCC searches for -+local header files. This may seem counterintuitive, but actually it is -+logical. -+ -+The purpose of @option{--prefix} is to specify where to @emph{install -+GCC}. The local header files in @file{/usr/local/include}---if you put -+any in that directory---are not part of GCC@. They are part of other -+programs---perhaps many others. (GCC installs its own header files in -+another directory which is based on the @option{--prefix} value.) -+ -+Both the local-prefix include directory and the GCC-prefix include -+directory are part of GCC's ``system include'' directories. Although these -+two directories are not fixed, they need to be searched in the proper -+order for the correct processing of the include_next directive. The -+local-prefix include directory is searched before the GCC-prefix -+include directory. Another characteristic of system include directories -+is that pedantic warnings are turned off for headers in these directories. -+ -+Some autoconf macros add @option{-I @var{directory}} options to the -+compiler command line, to ensure that directories containing installed -+packages' headers are searched. When @var{directory} is one of GCC's -+system include directories, GCC will ignore the option so that system -+directories continue to be processed in the correct order. This -+may result in a search order different from what was specified but the -+directory will still be searched. -+ -+GCC automatically searches for ordinary libraries using -+@env{GCC_EXEC_PREFIX}. Thus, when the same installation prefix is -+used for both GCC and packages, GCC will automatically search for -+both headers and libraries. This provides a configuration that is -+easy to use. GCC behaves in a manner similar to that when it is -+installed as a system compiler in @file{/usr}. -+ -+Sites that need to install multiple versions of GCC may not want to -+use the above simple configuration. It is possible to use the -+@option{--program-prefix}, @option{--program-suffix} and -+@option{--program-transform-name} options to install multiple versions -+into a single directory, but it may be simpler to use different prefixes -+and the @option{--with-local-prefix} option to specify the location of the -+site-specific files for each version. It will then be necessary for -+users to specify explicitly the location of local site libraries -+(e.g., with @env{LIBRARY_PATH}). -+ -+The same value can be used for both @option{--with-local-prefix} and -+@option{--prefix} provided it is not @file{/usr}. This can be used -+to avoid the default search of @file{/usr/local/include}. -+ -+@strong{Do not} specify @file{/usr} as the @option{--with-local-prefix}! -+The directory you use for @option{--with-local-prefix} @strong{must not} -+contain any of the system's standard header files. If it did contain -+them, certain programs would be miscompiled (including GNU Emacs, on -+certain targets), because this would override and nullify the header -+file corrections made by the @command{fixincludes} script. -+ -+Indications are that people who use this option use it based on mistaken -+ideas of what it is for. People use it as if it specified where to -+install part of GCC@. Perhaps they make this assumption because -+installing GCC creates the directory. -+ -+@item --enable-shared[=@var{package}[,@dots{}]] -+Build shared versions of libraries, if shared libraries are supported on -+the target platform. Unlike GCC 2.95.x and earlier, shared libraries -+are enabled by default on all platforms that support shared libraries. -+ -+If a list of packages is given as an argument, build shared libraries -+only for the listed packages. For other packages, only static libraries -+will be built. Package names currently recognized in the GCC tree are -+@samp{libgcc} (also known as @samp{gcc}), @samp{libstdc++} (not -+@samp{libstdc++-v3}), @samp{libffi}, @samp{zlib}, @samp{boehm-gc}, -+@samp{ada}, @samp{libada}, @samp{libjava} and @samp{libobjc}. -+Note @samp{libiberty} does not support shared libraries at all. -+ -+Use @option{--disable-shared} to build only static libraries. Note that -+@option{--disable-shared} does not accept a list of package names as -+argument, only @option{--enable-shared} does. -+ -+@item @anchor{with-gnu-as}--with-gnu-as -+Specify that the compiler should assume that the -+assembler it finds is the GNU assembler. However, this does not modify -+the rules to find an assembler and will result in confusion if the -+assembler found is not actually the GNU assembler. (Confusion may also -+result if the compiler finds the GNU assembler but has not been -+configured with @option{--with-gnu-as}.) If you have more than one -+assembler installed on your system, you may want to use this option in -+connection with @option{--with-as=@var{pathname}} or -+@option{--with-build-time-tools=@var{pathname}}. -+ -+The following systems are the only ones where it makes a difference -+whether you use the GNU assembler. On any other system, -+@option{--with-gnu-as} has no effect. -+ -+@itemize @bullet -+@item @samp{hppa1.0-@var{any}-@var{any}} -+@item @samp{hppa1.1-@var{any}-@var{any}} -+@item @samp{sparc-sun-solaris2.@var{any}} -+@item @samp{sparc64-@var{any}-solaris2.@var{any}} -+@end itemize -+ -+@item @anchor{with-as}--with-as=@var{pathname} -+Specify that the compiler should use the assembler pointed to by -+@var{pathname}, rather than the one found by the standard rules to find -+an assembler, which are: -+@itemize @bullet -+@item -+Unless GCC is being built with a cross compiler, check the -+@file{@var{libexec}/gcc/@var{target}/@var{version}} directory. -+@var{libexec} defaults to @file{@var{exec-prefix}/libexec}; -+@var{exec-prefix} defaults to @var{prefix}, which -+defaults to @file{/usr/local} unless overridden by the -+@option{--prefix=@var{pathname}} switch described above. @var{target} -+is the target system triple, such as @samp{sparc-sun-solaris2.7}, and -+@var{version} denotes the GCC version, such as 3.0. -+ -+@item -+If the target system is the same that you are building on, check -+operating system specific directories (e.g.@: @file{/usr/ccs/bin} on -+Sun Solaris 2). -+ -+@item -+Check in the @env{PATH} for a tool whose name is prefixed by the -+target system triple. -+ -+@item -+Check in the @env{PATH} for a tool whose name is not prefixed by the -+target system triple, if the host and target system triple are -+the same (in other words, we use a host tool if it can be used for -+the target as well). -+@end itemize -+ -+You may want to use @option{--with-as} if no assembler -+is installed in the directories listed above, or if you have multiple -+assemblers installed and want to choose one that is not found by the -+above rules. -+ -+@item @anchor{with-gnu-ld}--with-gnu-ld -+Same as @uref{#with-gnu-as,,@option{--with-gnu-as}} -+but for the linker. -+ -+@item --with-ld=@var{pathname} -+Same as @uref{#with-as,,@option{--with-as}} -+but for the linker. -+ -+@item --with-stabs -+Specify that stabs debugging -+information should be used instead of whatever format the host normally -+uses. Normally GCC uses the same debug format as the host system. -+ -+On MIPS based systems and on Alphas, you must specify whether you want -+GCC to create the normal ECOFF debugging format, or to use BSD-style -+stabs passed through the ECOFF symbol table. The normal ECOFF debug -+format cannot fully handle languages other than C@. BSD stabs format can -+handle other languages, but it only works with the GNU debugger GDB@. -+ -+Normally, GCC uses the ECOFF debugging format by default; if you -+prefer BSD stabs, specify @option{--with-stabs} when you configure GCC@. -+ -+No matter which default you choose when you configure GCC, the user -+can use the @option{-gcoff} and @option{-gstabs+} options to specify explicitly -+the debug format for a particular compilation. -+ -+@option{--with-stabs} is meaningful on the ISC system on the 386, also, if -+@option{--with-gas} is used. It selects use of stabs debugging -+information embedded in COFF output. This kind of debugging information -+supports C++ well; ordinary COFF debugging information does not. -+ -+@option{--with-stabs} is also meaningful on 386 systems running SVR4. It -+selects use of stabs debugging information embedded in ELF output. The -+C++ compiler currently (2.6.0) does not support the DWARF debugging -+information normally used on 386 SVR4 platforms; stabs provide a -+workable alternative. This requires gas and gdb, as the normal SVR4 -+tools can not generate or interpret stabs. -+ -+@item --disable-multilib -+Specify that multiple target -+libraries to support different target variants, calling -+conventions, etc.@: should not be built. The default is to build a -+predefined set of them. -+ -+Some targets provide finer-grained control over which multilibs are built -+(e.g., @option{--disable-softfloat}): -+@table @code -+@item arc-*-elf* -+biendian. -+ -+@item arm-*-* -+fpu, 26bit, underscore, interwork, biendian, nofmult. -+ -+@item m68*-*-* -+softfloat, m68881, m68000, m68020. -+ -+@item mips*-*-* -+single-float, biendian, softfloat. -+ -+@item powerpc*-*-*, rs6000*-*-* -+aix64, pthread, softfloat, powercpu, powerpccpu, powerpcos, biendian, -+sysv, aix. -+ -+@end table -+ -+@item --enable-threads -+Specify that the target -+supports threads. This affects the Objective-C compiler and runtime -+library, and exception handling for other languages like C++ and Java. -+On some systems, this is the default. -+ -+In general, the best (and, in many cases, the only known) threading -+model available will be configured for use. Beware that on some -+systems, GCC has not been taught what threading models are generally -+available for the system. In this case, @option{--enable-threads} is an -+alias for @option{--enable-threads=single}. -+ -+@item --disable-threads -+Specify that threading support should be disabled for the system. -+This is an alias for @option{--enable-threads=single}. -+ -+@item --enable-threads=@var{lib} -+Specify that -+@var{lib} is the thread support library. This affects the Objective-C -+compiler and runtime library, and exception handling for other languages -+like C++ and Java. The possibilities for @var{lib} are: -+ -+@table @code -+@item aix -+AIX thread support. -+@item dce -+DCE thread support. -+@item gnat -+Ada tasking support. For non-Ada programs, this setting is equivalent -+to @samp{single}. When used in conjunction with the Ada run time, it -+causes GCC to use the same thread primitives as Ada uses. This option -+is necessary when using both Ada and the back end exception handling, -+which is the default for most Ada targets. -+@item mach -+Generic MACH thread support, known to work on NeXTSTEP@. (Please note -+that the file needed to support this configuration, @file{gthr-mach.h}, is -+missing and thus this setting will cause a known bootstrap failure.) -+@item no -+This is an alias for @samp{single}. -+@item posix -+Generic POSIX/Unix98 thread support. -+@item posix95 -+Generic POSIX/Unix95 thread support. -+@item rtems -+RTEMS thread support. -+@item single -+Disable thread support, should work for all platforms. -+@item solaris -+Sun Solaris 2 thread support. -+@item vxworks -+VxWorks thread support. -+@item win32 -+Microsoft Win32 API thread support. -+@item nks -+Novell Kernel Services thread support. -+@end table -+ -+@item --enable-tls -+Specify that the target supports TLS (Thread Local Storage). Usually -+configure can correctly determine if TLS is supported. In cases where -+it guesses incorrectly, TLS can be explicitly enabled or disabled with -+@option{--enable-tls} or @option{--disable-tls}. This can happen if -+the assembler supports TLS but the C library does not, or if the -+assumptions made by the configure test are incorrect. -+ -+@item --disable-tls -+Specify that the target does not support TLS. -+This is an alias for @option{--enable-tls=no}. -+ -+@item --with-cpu=@var{cpu} -+@itemx --with-cpu-32=@var{cpu} -+@itemx --with-cpu-64=@var{cpu} -+Specify which cpu variant the compiler should generate code for by default. -+@var{cpu} will be used as the default value of the @option{-mcpu=} switch. -+This option is only supported on some targets, including ARM, i386, M68k, -+PowerPC, and SPARC@. The @option{--with-cpu-32} and -+@option{--with-cpu-64} options specify separate default CPUs for -+32-bit and 64-bit modes; these options are only supported for i386 and -+x86-64. -+ -+@item --with-schedule=@var{cpu} -+@itemx --with-arch=@var{cpu} -+@itemx --with-arch-32=@var{cpu} -+@itemx --with-arch-64=@var{cpu} -+@itemx --with-tune=@var{cpu} -+@itemx --with-tune-32=@var{cpu} -+@itemx --with-tune-64=@var{cpu} -+@itemx --with-abi=@var{abi} -+@itemx --with-fpu=@var{type} -+@itemx --with-float=@var{type} -+These configure options provide default values for the @option{-mschedule=}, -+@option{-march=}, @option{-mtune=}, @option{-mabi=}, and @option{-mfpu=} -+options and for @option{-mhard-float} or @option{-msoft-float}. As with -+@option{--with-cpu}, which switches will be accepted and acceptable values -+of the arguments depend on the target. -+ -+@item --with-mode=@var{mode} -+Specify if the compiler should default to @option{-marm} or @option{-mthumb}. -+This option is only supported on ARM targets. -+ -+@item --with-divide=@var{type} -+Specify how the compiler should generate code for checking for -+division by zero. This option is only supported on the MIPS target. -+The possibilities for @var{type} are: -+@table @code -+@item traps -+Division by zero checks use conditional traps (this is the default on -+systems that support conditional traps). -+@item breaks -+Division by zero checks use the break instruction. -+@end table -+ -+@c If you make --with-llsc the default for additional targets, -+@c update the --with-llsc description in the MIPS section below. -+ -+@item --with-llsc -+On MIPS targets, make @option{-mllsc} the default when no -+@option{-mno-lsc} option is passed. This is the default for -+Linux-based targets, as the kernel will emulate them if the ISA does -+not provide them. -+ -+@item --without-llsc -+On MIPS targets, make @option{-mno-llsc} the default when no -+@option{-mllsc} option is passed. -+ -+@item --with-mips-plt -+On MIPS targets, make use of copy relocations and PLTs. -+These features are extensions to the traditional -+SVR4-based MIPS ABIs and require support from GNU binutils -+and the runtime C library. -+ -+@item --enable-__cxa_atexit -+Define if you want to use __cxa_atexit, rather than atexit, to -+register C++ destructors for local statics and global objects. -+This is essential for fully standards-compliant handling of -+destructors, but requires __cxa_atexit in libc. This option is currently -+only available on systems with GNU libc. When enabled, this will cause -+@option{-fuse-cxa-atexit} to be passed by default. -+ -+@item --enable-target-optspace -+Specify that target -+libraries should be optimized for code space instead of code speed. -+This is the default for the m32r platform. -+ -+@item --disable-cpp -+Specify that a user visible @command{cpp} program should not be installed. -+ -+@item --with-cpp-install-dir=@var{dirname} -+Specify that the user visible @command{cpp} program should be installed -+in @file{@var{prefix}/@var{dirname}/cpp}, in addition to @var{bindir}. -+ -+@item --enable-initfini-array -+Force the use of sections @code{.init_array} and @code{.fini_array} -+(instead of @code{.init} and @code{.fini}) for constructors and -+destructors. Option @option{--disable-initfini-array} has the -+opposite effect. If neither option is specified, the configure script -+will try to guess whether the @code{.init_array} and -+@code{.fini_array} sections are supported and, if they are, use them. -+ -+@item --enable-maintainer-mode -+The build rules that -+regenerate the GCC master message catalog @file{gcc.pot} are normally -+disabled. This is because it can only be rebuilt if the complete source -+tree is present. If you have changed the sources and want to rebuild the -+catalog, configuring with @option{--enable-maintainer-mode} will enable -+this. Note that you need a recent version of the @code{gettext} tools -+to do so. -+ -+@item --disable-bootstrap -+For a native build, the default configuration is to perform -+a 3-stage bootstrap of the compiler when @samp{make} is invoked, -+testing that GCC can compile itself correctly. If you want to disable -+this process, you can configure with @option{--disable-bootstrap}. -+ -+@item --enable-bootstrap -+In special cases, you may want to perform a 3-stage build -+even if the target and host triplets are different. -+This could happen when the host can run code compiled for -+the target (e.g.@: host is i686-linux, target is i486-linux). -+Starting from GCC 4.2, to do this you have to configure explicitly -+with @option{--enable-bootstrap}. -+ -+@item --enable-generated-files-in-srcdir -+Neither the .c and .h files that are generated from Bison and flex nor the -+info manuals and man pages that are built from the .texi files are present -+in the SVN development tree. When building GCC from that development tree, -+or from one of our snapshots, those generated files are placed in your -+build directory, which allows for the source to be in a readonly -+directory. -+ -+If you configure with @option{--enable-generated-files-in-srcdir} then those -+generated files will go into the source directory. This is mainly intended -+for generating release or prerelease tarballs of the GCC sources, since it -+is not a requirement that the users of source releases to have flex, Bison, -+or makeinfo. -+ -+@item --enable-version-specific-runtime-libs -+Specify -+that runtime libraries should be installed in the compiler specific -+subdirectory (@file{@var{libdir}/gcc}) rather than the usual places. In -+addition, @samp{libstdc++}'s include files will be installed into -+@file{@var{libdir}} unless you overruled it by using -+@option{--with-gxx-include-dir=@var{dirname}}. Using this option is -+particularly useful if you intend to use several versions of GCC in -+parallel. This is currently supported by @samp{libgfortran}, -+@samp{libjava}, @samp{libmudflap}, @samp{libstdc++}, and @samp{libobjc}. -+ -+@item --enable-languages=@var{lang1},@var{lang2},@dots{} -+Specify that only a particular subset of compilers and -+their runtime libraries should be built. For a list of valid values for -+@var{langN} you can issue the following command in the -+@file{gcc} directory of your GCC source tree:@* -+@smallexample -+grep language= */config-lang.in -+@end smallexample -+Currently, you can use any of the following: -+@code{all}, @code{ada}, @code{c}, @code{c++}, @code{fortran}, @code{java}, -+@code{objc}, @code{obj-c++}. -+Building the Ada compiler has special requirements, see below. -+If you do not pass this flag, or specify the option @code{all}, then all -+default languages available in the @file{gcc} sub-tree will be configured. -+Ada and Objective-C++ are not default languages; the rest are. -+Re-defining @code{LANGUAGES} when calling @samp{make} @strong{does not} -+work anymore, as those language sub-directories might not have been -+configured! -+ -+@item --enable-stage1-languages=@var{lang1},@var{lang2},@dots{} -+Specify that a particular subset of compilers and their runtime -+libraries should be built with the system C compiler during stage 1 of -+the bootstrap process, rather than only in later stages with the -+bootstrapped C compiler. The list of valid values is the same as for -+@option{--enable-languages}, and the option @code{all} will select all -+of the languages enabled by @option{--enable-languages}. This option is -+primarily useful for GCC development; for instance, when a development -+version of the compiler cannot bootstrap due to compiler bugs, or when -+one is debugging front ends other than the C front end. When this -+option is used, one can then build the target libraries for the -+specified languages with the stage-1 compiler by using @command{make -+stage1-bubble all-target}, or run the testsuite on the stage-1 compiler -+for the specified languages using @command{make stage1-start check-gcc}. -+ -+@item --disable-libada -+Specify that the run-time libraries and tools used by GNAT should not -+be built. This can be useful for debugging, or for compatibility with -+previous Ada build procedures, when it was required to explicitly -+do a @samp{make -C gcc gnatlib_and_tools}. -+ -+@item --disable-libssp -+Specify that the run-time libraries for stack smashing protection -+should not be built. -+ -+@item --disable-libgomp -+Specify that the run-time libraries used by GOMP should not be built. -+ -+@item --with-dwarf2 -+Specify that the compiler should -+use DWARF 2 debugging information as the default. -+ -+@item --enable-targets=all -+@itemx --enable-targets=@var{target_list} -+Some GCC targets, e.g.@: powerpc64-linux, build bi-arch compilers. -+These are compilers that are able to generate either 64-bit or 32-bit -+code. Typically, the corresponding 32-bit target, e.g.@: -+powerpc-linux for powerpc64-linux, only generates 32-bit code. This -+option enables the 32-bit target to be a bi-arch compiler, which is -+useful when you want a bi-arch compiler that defaults to 32-bit, and -+you are building a bi-arch or multi-arch binutils in a combined tree. -+Currently, this option only affects sparc-linux, powerpc-linux and -+x86-linux. -+ -+@item --enable-secureplt -+This option enables @option{-msecure-plt} by default for powerpc-linux. -+@ifnothtml -+@xref{RS/6000 and PowerPC Options,, RS/6000 and PowerPC Options, gcc, -+Using the GNU Compiler Collection (GCC)}, -+@end ifnothtml -+@ifhtml -+See ``RS/6000 and PowerPC Options'' in the main manual -+@end ifhtml -+ -+@item --enable-cld -+This option enables @option{-mcld} by default for 32-bit x86 targets. -+@ifnothtml -+@xref{i386 and x86-64 Options,, i386 and x86-64 Options, gcc, -+Using the GNU Compiler Collection (GCC)}, -+@end ifnothtml -+@ifhtml -+See ``i386 and x86-64 Options'' in the main manual -+@end ifhtml -+ -+@item --enable-win32-registry -+@itemx --enable-win32-registry=@var{key} -+@itemx --disable-win32-registry -+The @option{--enable-win32-registry} option enables Microsoft Windows-hosted GCC -+to look up installations paths in the registry using the following key: -+ -+@smallexample -+@code{HKEY_LOCAL_MACHINE\SOFTWARE\Free Software Foundation\@var{key}} -+@end smallexample -+ -+@var{key} defaults to GCC version number, and can be overridden by the -+@option{--enable-win32-registry=@var{key}} option. Vendors and distributors -+who use custom installers are encouraged to provide a different key, -+perhaps one comprised of vendor name and GCC version number, to -+avoid conflict with existing installations. This feature is enabled -+by default, and can be disabled by @option{--disable-win32-registry} -+option. This option has no effect on the other hosts. -+ -+@item --nfp -+Specify that the machine does not have a floating point unit. This -+option only applies to @samp{m68k-sun-sunos@var{n}}. On any other -+system, @option{--nfp} has no effect. -+ -+@item --enable-werror -+@itemx --disable-werror -+@itemx --enable-werror=yes -+@itemx --enable-werror=no -+When you specify this option, it controls whether certain files in the -+compiler are built with @option{-Werror} in bootstrap stage2 and later. -+If you don't specify it, @option{-Werror} is turned on for the main -+development trunk. However it defaults to off for release branches and -+final releases. The specific files which get @option{-Werror} are -+controlled by the Makefiles. -+ -+@item --enable-checking -+@itemx --enable-checking=@var{list} -+When you specify this option, the compiler is built to perform internal -+consistency checks of the requested complexity. This does not change the -+generated code, but adds error checking within the compiler. This will -+slow down the compiler and may only work properly if you are building -+the compiler with GCC@. This is @samp{yes} by default when building -+from SVN or snapshots, but @samp{release} for releases. The default -+for building the stage1 compiler is @samp{yes}. More control -+over the checks may be had by specifying @var{list}. The categories of -+checks available are @samp{yes} (most common checks -+@samp{assert,misc,tree,gc,rtlflag,runtime}), @samp{no} (no checks at -+all), @samp{all} (all but @samp{valgrind}), @samp{release} (cheapest -+checks @samp{assert,runtime}) or @samp{none} (same as @samp{no}). -+Individual checks can be enabled with these flags @samp{assert}, -+@samp{df}, @samp{fold}, @samp{gc}, @samp{gcac} @samp{misc}, @samp{rtl}, -+@samp{rtlflag}, @samp{runtime}, @samp{tree}, and @samp{valgrind}. -+ -+The @samp{valgrind} check requires the external @command{valgrind} -+simulator, available from @uref{http://valgrind.org/}. The -+@samp{df}, @samp{rtl}, @samp{gcac} and @samp{valgrind} checks are very expensive. -+To disable all checking, @samp{--disable-checking} or -+@samp{--enable-checking=none} must be explicitly requested. Disabling -+assertions will make the compiler and runtime slightly faster but -+increase the risk of undetected internal errors causing wrong code to be -+generated. -+ -+@item --disable-stage1-checking -+@item --enable-stage1-checking -+@itemx --enable-stage1-checking=@var{list} -+If no @option{--enable-checking} option is specified the stage1 -+compiler will be built with @samp{yes} checking enabled, otherwise -+the stage1 checking flags are the same as specified by -+@option{--enable-checking}. To build the stage1 compiler with -+different checking options use @option{--enable-stage1-checking}. -+The list of checking options is the same as for @option{--enable-checking}. -+If your system is too slow or too small to bootstrap a released compiler -+with checking for stage1 enabled, you can use @samp{--disable-stage1-checking} -+to disable checking for the stage1 compiler. -+ -+@item --enable-coverage -+@itemx --enable-coverage=@var{level} -+With this option, the compiler is built to collect self coverage -+information, every time it is run. This is for internal development -+purposes, and only works when the compiler is being built with gcc. The -+@var{level} argument controls whether the compiler is built optimized or -+not, values are @samp{opt} and @samp{noopt}. For coverage analysis you -+want to disable optimization, for performance analysis you want to -+enable optimization. When coverage is enabled, the default level is -+without optimization. -+ -+@item --enable-gather-detailed-mem-stats -+When this option is specified more detailed information on memory -+allocation is gathered. This information is printed when using -+@option{-fmem-report}. -+ -+@item --with-gc -+@itemx --with-gc=@var{choice} -+With this option you can specify the garbage collector implementation -+used during the compilation process. @var{choice} can be one of -+@samp{page} and @samp{zone}, where @samp{page} is the default. -+ -+@item --enable-nls -+@itemx --disable-nls -+The @option{--enable-nls} option enables Native Language Support (NLS), -+which lets GCC output diagnostics in languages other than American -+English. Native Language Support is enabled by default if not doing a -+canadian cross build. The @option{--disable-nls} option disables NLS@. -+ -+@item --with-included-gettext -+If NLS is enabled, the @option{--with-included-gettext} option causes the build -+procedure to prefer its copy of GNU @command{gettext}. -+ -+@item --with-catgets -+If NLS is enabled, and if the host lacks @code{gettext} but has the -+inferior @code{catgets} interface, the GCC build procedure normally -+ignores @code{catgets} and instead uses GCC's copy of the GNU -+@code{gettext} library. The @option{--with-catgets} option causes the -+build procedure to use the host's @code{catgets} in this situation. -+ -+@item --with-libiconv-prefix=@var{dir} -+Search for libiconv header files in @file{@var{dir}/include} and -+libiconv library files in @file{@var{dir}/lib}. -+ -+@item --enable-obsolete -+Enable configuration for an obsoleted system. If you attempt to -+configure GCC for a system (build, host, or target) which has been -+obsoleted, and you do not specify this flag, configure will halt with an -+error message. -+ -+All support for systems which have been obsoleted in one release of GCC -+is removed entirely in the next major release, unless someone steps -+forward to maintain the port. -+ -+@item --enable-decimal-float -+@itemx --enable-decimal-float=yes -+@itemx --enable-decimal-float=no -+@itemx --enable-decimal-float=bid -+@itemx --enable-decimal-float=dpd -+@itemx --disable-decimal-float -+Enable (or disable) support for the C decimal floating point extension -+that is in the IEEE 754-2008 standard. This is enabled by default only -+on PowerPC, i386, and x86_64 GNU/Linux systems. Other systems may also -+support it, but require the user to specifically enable it. You can -+optionally control which decimal floating point format is used (either -+@samp{bid} or @samp{dpd}). The @samp{bid} (binary integer decimal) -+format is default on i386 and x86_64 systems, and the @samp{dpd} -+(densely packed decimal) format is default on PowerPC systems. -+ -+@item --enable-fixed-point -+@itemx --disable-fixed-point -+Enable (or disable) support for C fixed-point arithmetic. -+This option is enabled by default for some targets (such as MIPS) which -+have hardware-support for fixed-point operations. On other targets, you -+may enable this option manually. -+ -+@item --with-long-double-128 -+Specify if @code{long double} type should be 128-bit by default on selected -+GNU/Linux architectures. If using @code{--without-long-double-128}, -+@code{long double} will be by default 64-bit, the same as @code{double} type. -+When neither of these configure options are used, the default will be -+128-bit @code{long double} when built against GNU C Library 2.4 and later, -+64-bit @code{long double} otherwise. -+ -+@item --with-gmp=@var{pathname} -+@itemx --with-gmp-include=@var{pathname} -+@itemx --with-gmp-lib=@var{pathname} -+@itemx --with-mpfr=@var{pathname} -+@itemx --with-mpfr-include=@var{pathname} -+@itemx --with-mpfr-lib=@var{pathname} -+If you do not have GMP (the GNU Multiple Precision library) and the -+MPFR Libraries installed in a standard location and you want to build -+GCC, you can explicitly specify the directory where they are installed -+(@samp{--with-gmp=@var{gmpinstalldir}}, -+@samp{--with-mpfr=@var{mpfrinstalldir}}). The -+@option{--with-gmp=@var{gmpinstalldir}} option is shorthand for -+@option{--with-gmp-lib=@var{gmpinstalldir}/lib} and -+@option{--with-gmp-include=@var{gmpinstalldir}/include}. Likewise the -+@option{--with-mpfr=@var{mpfrinstalldir}} option is shorthand for -+@option{--with-mpfr-lib=@var{mpfrinstalldir}/lib} and -+@option{--with-mpfr-include=@var{mpfrinstalldir}/include}. If these -+shorthand assumptions are not correct, you can use the explicit -+include and lib options directly. -+ -+@item --with-ppl=@var{pathname} -+@itemx --with-ppl-include=@var{pathname} -+@itemx --with-ppl-lib=@var{pathname} -+@itemx --with-cloog=@var{pathname} -+@itemx --with-cloog-include=@var{pathname} -+@itemx --with-cloog-lib=@var{pathname} -+If you do not have PPL (the Parma Polyhedra Library) and the CLooG -+libraries installed in a standard location and you want to build GCC, -+you can explicitly specify the directory where they are installed -+(@samp{--with-ppl=@var{pplinstalldir}}, -+@samp{--with-cloog=@var{clooginstalldir}}). The -+@option{--with-ppl=@var{pplinstalldir}} option is shorthand for -+@option{--with-ppl-lib=@var{pplinstalldir}/lib} and -+@option{--with-ppl-include=@var{pplinstalldir}/include}. Likewise the -+@option{--with-cloog=@var{clooginstalldir}} option is shorthand for -+@option{--with-cloog-lib=@var{clooginstalldir}/lib} and -+@option{--with-cloog-include=@var{clooginstalldir}/include}. If these -+shorthand assumptions are not correct, you can use the explicit -+include and lib options directly. -+ -+@item --with-host-libstdcxx=@var{linker-args} -+If you are linking with a static copy of PPL, you can use this option -+to specify how the linker should find the standard C++ library used -+internally by PPL. Typical values of @var{linker-args} might be -+@samp{-lstdc++} or @samp{-Wl,-Bstatic,-lstdc++,-Bdynamic -lm}. If you are -+linking with a shared copy of PPL, you probably do not need this -+option; shared library dependencies will cause the linker to search -+for the standard C++ library automatically. -+ -+@item --with-debug-prefix-map=@var{map} -+Convert source directory names using @option{-fdebug-prefix-map} when -+building runtime libraries. @samp{@var{map}} is a space-separated -+list of maps of the form @samp{@var{old}=@var{new}}. -+ -+@end table -+ -+@subheading Cross-Compiler-Specific Options -+The following options only apply to building cross compilers. -+@table @code -+@item --with-sysroot -+@itemx --with-sysroot=@var{dir} -+Tells GCC to consider @var{dir} as the root of a tree that contains a -+(subset of) the root filesystem of the target operating system. -+Target system headers, libraries and run-time object files will be -+searched in there. The specified directory is not copied into the -+install tree, unlike the options @option{--with-headers} and -+@option{--with-libs} that this option obsoletes. The default value, -+in case @option{--with-sysroot} is not given an argument, is -+@option{$@{gcc_tooldir@}/sys-root}. If the specified directory is a -+subdirectory of @option{$@{exec_prefix@}}, then it will be found relative to -+the GCC binaries if the installation tree is moved. -+ -+@item --with-build-sysroot -+@itemx --with-build-sysroot=@var{dir} -+Tells GCC to consider @var{dir} as the system root (see -+@option{--with-sysroot}) while building target libraries, instead of -+the directory specified with @option{--with-sysroot}. This option is -+only useful when you are already using @option{--with-sysroot}. You -+can use @option{--with-build-sysroot} when you are configuring with -+@option{--prefix} set to a directory that is different from the one in -+which you are installing GCC and your target libraries. -+ -+This option affects the system root for the compiler used to build -+target libraries (which runs on the build system); it does not affect -+the compiler which is used to build GCC itself. -+ -+@item --with-headers -+@itemx --with-headers=@var{dir} -+Deprecated in favor of @option{--with-sysroot}. -+Specifies that target headers are available when building a cross compiler. -+The @var{dir} argument specifies a directory which has the target include -+files. These include files will be copied into the @file{gcc} install -+directory. @emph{This option with the @var{dir} argument is required} when -+building a cross compiler, if @file{@var{prefix}/@var{target}/sys-include} -+doesn't pre-exist. If @file{@var{prefix}/@var{target}/sys-include} does -+pre-exist, the @var{dir} argument may be omitted. @command{fixincludes} -+will be run on these files to make them compatible with GCC@. -+ -+@item --without-headers -+Tells GCC not use any target headers from a libc when building a cross -+compiler. When crossing to GNU/Linux, you need the headers so GCC -+can build the exception handling for libgcc. -+ -+@item --with-libs -+@itemx --with-libs=``@var{dir1} @var{dir2} @dots{} @var{dirN}'' -+Deprecated in favor of @option{--with-sysroot}. -+Specifies a list of directories which contain the target runtime -+libraries. These libraries will be copied into the @file{gcc} install -+directory. If the directory list is omitted, this option has no -+effect. -+ -+@item --with-newlib -+Specifies that @samp{newlib} is -+being used as the target C library. This causes @code{__eprintf} to be -+omitted from @file{libgcc.a} on the assumption that it will be provided by -+@samp{newlib}. -+ -+@item --with-build-time-tools=@var{dir} -+Specifies where to find the set of target tools (assembler, linker, etc.) -+that will be used while building GCC itself. This option can be useful -+if the directory layouts are different between the system you are building -+GCC on, and the system where you will deploy it. -+ -+For example, on a @option{ia64-hp-hpux} system, you may have the GNU -+assembler and linker in @file{/usr/bin}, and the native tools in a -+different path, and build a toolchain that expects to find the -+native tools in @file{/usr/bin}. -+ -+When you use this option, you should ensure that @var{dir} includes -+@command{ar}, @command{as}, @command{ld}, @command{nm}, -+@command{ranlib} and @command{strip} if necessary, and possibly -+@command{objdump}. Otherwise, GCC may use an inconsistent set of -+tools. -+@end table -+ -+@subheading Java-Specific Options -+ -+The following option applies to the build of the Java front end. -+ -+@table @code -+@item --disable-libgcj -+Specify that the run-time libraries -+used by GCJ should not be built. This is useful in case you intend -+to use GCJ with some other run-time, or you're going to install it -+separately, or it just happens not to build on your particular -+machine. In general, if the Java front end is enabled, the GCJ -+libraries will be enabled too, unless they're known to not work on -+the target platform. If GCJ is enabled but @samp{libgcj} isn't built, you -+may need to port it; in this case, before modifying the top-level -+@file{configure.in} so that @samp{libgcj} is enabled by default on this platform, -+you may use @option{--enable-libgcj} to override the default. -+ -+@end table -+ -+The following options apply to building @samp{libgcj}. -+ -+@subsubheading General Options -+ -+@table @code -+@item --enable-java-maintainer-mode -+By default the @samp{libjava} build will not attempt to compile the -+@file{.java} source files to @file{.class}. Instead, it will use the -+@file{.class} files from the source tree. If you use this option you -+must have executables named @command{ecj1} and @command{gjavah} in your path -+for use by the build. You must use this option if you intend to -+modify any @file{.java} files in @file{libjava}. -+ -+@item --with-java-home=@var{dirname} -+This @samp{libjava} option overrides the default value of the -+@samp{java.home} system property. It is also used to set -+@samp{sun.boot.class.path} to @file{@var{dirname}/lib/rt.jar}. By -+default @samp{java.home} is set to @file{@var{prefix}} and -+@samp{sun.boot.class.path} to -+@file{@var{datadir}/java/libgcj-@var{version}.jar}. -+ -+@item --with-ecj-jar=@var{filename} -+This option can be used to specify the location of an external jar -+file containing the Eclipse Java compiler. A specially modified -+version of this compiler is used by @command{gcj} to parse -+@file{.java} source files. If this option is given, the -+@samp{libjava} build will create and install an @file{ecj1} executable -+which uses this jar file at runtime. -+ -+If this option is not given, but an @file{ecj.jar} file is found in -+the topmost source tree at configure time, then the @samp{libgcj} -+build will create and install @file{ecj1}, and will also install the -+discovered @file{ecj.jar} into a suitable place in the install tree. -+ -+If @file{ecj1} is not installed, then the user will have to supply one -+on his path in order for @command{gcj} to properly parse @file{.java} -+source files. A suitable jar is available from -+@uref{ftp://sourceware.org/pub/java/}. -+ -+@item --disable-getenv-properties -+Don't set system properties from @env{GCJ_PROPERTIES}. -+ -+@item --enable-hash-synchronization -+Use a global hash table for monitor locks. Ordinarily, -+@samp{libgcj}'s @samp{configure} script automatically makes -+the correct choice for this option for your platform. Only use -+this if you know you need the library to be configured differently. -+ -+@item --enable-interpreter -+Enable the Java interpreter. The interpreter is automatically -+enabled by default on all platforms that support it. This option -+is really only useful if you want to disable the interpreter -+(using @option{--disable-interpreter}). -+ -+@item --disable-java-net -+Disable java.net. This disables the native part of java.net only, -+using non-functional stubs for native method implementations. -+ -+@item --disable-jvmpi -+Disable JVMPI support. -+ -+@item --disable-libgcj-bc -+Disable BC ABI compilation of certain parts of libgcj. By default, -+some portions of libgcj are compiled with @option{-findirect-dispatch} -+and @option{-fno-indirect-classes}, allowing them to be overridden at -+run-time. -+ -+If @option{--disable-libgcj-bc} is specified, libgcj is built without -+these options. This allows the compile-time linker to resolve -+dependencies when statically linking to libgcj. However it makes it -+impossible to override the affected portions of libgcj at run-time. -+ -+@item --enable-reduced-reflection -+Build most of libgcj with @option{-freduced-reflection}. This reduces -+the size of libgcj at the expense of not being able to do accurate -+reflection on the classes it contains. This option is safe if you -+know that code using libgcj will never use reflection on the standard -+runtime classes in libgcj (including using serialization, RMI or CORBA). -+ -+@item --with-ecos -+Enable runtime eCos target support. -+ -+@item --without-libffi -+Don't use @samp{libffi}. This will disable the interpreter and JNI -+support as well, as these require @samp{libffi} to work. -+ -+@item --enable-libgcj-debug -+Enable runtime debugging code. -+ -+@item --enable-libgcj-multifile -+If specified, causes all @file{.java} source files to be -+compiled into @file{.class} files in one invocation of -+@samp{gcj}. This can speed up build time, but is more -+resource-intensive. If this option is unspecified or -+disabled, @samp{gcj} is invoked once for each @file{.java} -+file to compile into a @file{.class} file. -+ -+@item --with-libiconv-prefix=DIR -+Search for libiconv in @file{DIR/include} and @file{DIR/lib}. -+ -+@item --enable-sjlj-exceptions -+Force use of the @code{setjmp}/@code{longjmp}-based scheme for exceptions. -+@samp{configure} ordinarily picks the correct value based on the platform. -+Only use this option if you are sure you need a different setting. -+ -+@item --with-system-zlib -+Use installed @samp{zlib} rather than that included with GCC@. -+ -+@item --with-win32-nlsapi=ansi, unicows or unicode -+Indicates how MinGW @samp{libgcj} translates between UNICODE -+characters and the Win32 API@. -+ -+@item --enable-java-home -+If enabled, this creates a JPackage compatible SDK environment during install. -+Note that if --enable-java-home is used, --with-arch-directory=ARCH must also -+be specified. -+ -+@item --with-arch-directory=ARCH -+Specifies the name to use for the @file{jre/lib/ARCH} directory in the SDK -+environment created when --enable-java-home is passed. Typical names for this -+directory include i386, amd64, ia64, etc. -+ -+@item --with-os-directory=DIR -+Specifies the OS directory for the SDK include directory. This is set to auto -+detect, and is typically 'linux'. -+ -+@item --with-origin-name=NAME -+Specifies the JPackage origin name. This defaults to the 'gcj' in -+java-1.5.0-gcj. -+ -+@item --with-arch-suffix=SUFFIX -+Specifies the suffix for the sdk directory. Defaults to the empty string. -+Examples include '.x86_64' in 'java-1.5.0-gcj-1.5.0.0.x86_64'. -+ -+@item --with-jvm-root-dir=DIR -+Specifies where to install the SDK. Default is $(prefix)/lib/jvm. -+ -+@item --with-jvm-jar-dir=DIR -+Specifies where to install jars. Default is $(prefix)/lib/jvm-exports. -+ -+@item --with-python-dir=DIR -+Specifies where to install the Python modules used for aot-compile. DIR should -+not include the prefix used in installation. For example, if the Python modules -+are to be installed in /usr/lib/python2.5/site-packages, then -+--with-python-dir=/lib/python2.5/site-packages should be passed. If this is -+not specified, then the Python modules are installed in $(prefix)/share/python. -+ -+@item --enable-aot-compile-rpm -+Adds aot-compile-rpm to the list of installed scripts. -+ -+@table @code -+@item ansi -+Use the single-byte @code{char} and the Win32 A functions natively, -+translating to and from UNICODE when using these functions. If -+unspecified, this is the default. -+ -+@item unicows -+Use the @code{WCHAR} and Win32 W functions natively. Adds -+@code{-lunicows} to @file{libgcj.spec} to link with @samp{libunicows}. -+@file{unicows.dll} needs to be deployed on Microsoft Windows 9X machines -+running built executables. @file{libunicows.a}, an open-source -+import library around Microsoft's @code{unicows.dll}, is obtained from -+@uref{http://libunicows.sourceforge.net/}, which also gives details -+on getting @file{unicows.dll} from Microsoft. -+ -+@item unicode -+Use the @code{WCHAR} and Win32 W functions natively. Does @emph{not} -+add @code{-lunicows} to @file{libgcj.spec}. The built executables will -+only run on Microsoft Windows NT and above. -+@end table -+@end table -+ -+@subsubheading AWT-Specific Options -+ -+@table @code -+@item --with-x -+Use the X Window System. -+ -+@item --enable-java-awt=PEER(S) -+Specifies the AWT peer library or libraries to build alongside -+@samp{libgcj}. If this option is unspecified or disabled, AWT -+will be non-functional. Current valid values are @option{gtk} and -+@option{xlib}. Multiple libraries should be separated by a -+comma (i.e.@: @option{--enable-java-awt=gtk,xlib}). -+ -+@item --enable-gtk-cairo -+Build the cairo Graphics2D implementation on GTK@. -+ -+@item --enable-java-gc=TYPE -+Choose garbage collector. Defaults to @option{boehm} if unspecified. -+ -+@item --disable-gtktest -+Do not try to compile and run a test GTK+ program. -+ -+@item --disable-glibtest -+Do not try to compile and run a test GLIB program. -+ -+@item --with-libart-prefix=PFX -+Prefix where libart is installed (optional). -+ -+@item --with-libart-exec-prefix=PFX -+Exec prefix where libart is installed (optional). -+ -+@item --disable-libarttest -+Do not try to compile and run a test libart program. -+ -+@end table -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Building**************************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Building, Testing, Configuration, Installing GCC -+@end ifnothtml -+@ifset buildhtml -+@ifnothtml -+@chapter Building -+@end ifnothtml -+@cindex Installing GCC: Building -+ -+Now that GCC is configured, you are ready to build the compiler and -+runtime libraries. -+ -+Some commands executed when making the compiler may fail (return a -+nonzero status) and be ignored by @command{make}. These failures, which -+are often due to files that were not found, are expected, and can safely -+be ignored. -+ -+It is normal to have compiler warnings when compiling certain files. -+Unless you are a GCC developer, you can generally ignore these warnings -+unless they cause compilation to fail. Developers should attempt to fix -+any warnings encountered, however they can temporarily continue past -+warnings-as-errors by specifying the configure flag -+@option{--disable-werror}. -+ -+On certain old systems, defining certain environment variables such as -+@env{CC} can interfere with the functioning of @command{make}. -+ -+If you encounter seemingly strange errors when trying to build the -+compiler in a directory other than the source directory, it could be -+because you have previously configured the compiler in the source -+directory. Make sure you have done all the necessary preparations. -+ -+If you build GCC on a BSD system using a directory stored in an old System -+V file system, problems may occur in running @command{fixincludes} if the -+System V file system doesn't support symbolic links. These problems -+result in a failure to fix the declaration of @code{size_t} in -+@file{sys/types.h}. If you find that @code{size_t} is a signed type and -+that type mismatches occur, this could be the cause. -+ -+The solution is not to use such a directory for building GCC@. -+ -+Similarly, when building from SVN or snapshots, or if you modify -+@file{*.l} files, you need the Flex lexical analyzer generator -+installed. If you do not modify @file{*.l} files, releases contain -+the Flex-generated files and you do not need Flex installed to build -+them. There is still one Flex-based lexical analyzer (part of the -+build machinery, not of GCC itself) that is used even if you only -+build the C front end. -+ -+When building from SVN or snapshots, or if you modify Texinfo -+documentation, you need version 4.7 or later of Texinfo installed if you -+want Info documentation to be regenerated. Releases contain Info -+documentation pre-built for the unmodified documentation in the release. -+ -+@section Building a native compiler -+ -+For a native build, the default configuration is to perform -+a 3-stage bootstrap of the compiler when @samp{make} is invoked. -+This will build the entire GCC system and ensure that it compiles -+itself correctly. It can be disabled with the @option{--disable-bootstrap} -+parameter to @samp{configure}, but bootstrapping is suggested because -+the compiler will be tested more completely and could also have -+better performance. -+ -+The bootstrapping process will complete the following steps: -+ -+@itemize @bullet -+@item -+Build tools necessary to build the compiler. -+ -+@item -+Perform a 3-stage bootstrap of the compiler. This includes building -+three times the target tools for use by the compiler such as binutils -+(bfd, binutils, gas, gprof, ld, and opcodes) if they have been -+individually linked or moved into the top level GCC source tree before -+configuring. -+ -+@item -+Perform a comparison test of the stage2 and stage3 compilers. -+ -+@item -+Build runtime libraries using the stage3 compiler from the previous step. -+ -+@end itemize -+ -+If you are short on disk space you might consider @samp{make -+bootstrap-lean} instead. The sequence of compilation is the -+same described above, but object files from the stage1 and -+stage2 of the 3-stage bootstrap of the compiler are deleted as -+soon as they are no longer needed. -+ -+If you wish to use non-default GCC flags when compiling the stage2 -+and stage3 compilers, set @code{BOOT_CFLAGS} on the command line when -+doing @samp{make}. For example, if you want to save additional space -+during the bootstrap and in the final installation as well, you can -+build the compiler binaries without debugging information as in the -+following example. This will save roughly 40% of disk space both for -+the bootstrap and the final installation. (Libraries will still contain -+debugging information.) -+ -+@smallexample -+ make BOOT_CFLAGS='-O' bootstrap -+@end smallexample -+ -+You can place non-default optimization flags into @code{BOOT_CFLAGS}; they -+are less well tested here than the default of @samp{-g -O2}, but should -+still work. In a few cases, you may find that you need to specify special -+flags such as @option{-msoft-float} here to complete the bootstrap; or, -+if the native compiler miscompiles the stage1 compiler, you may need -+to work around this, by choosing @code{BOOT_CFLAGS} to avoid the parts -+of the stage1 compiler that were miscompiled, or by using @samp{make -+bootstrap4} to increase the number of stages of bootstrap. -+ -+@code{BOOT_CFLAGS} does not apply to bootstrapped target libraries. -+Since these are always compiled with the compiler currently being -+bootstrapped, you can use @code{CFLAGS_FOR_TARGET} to modify their -+compilation flags, as for non-bootstrapped target libraries. -+Again, if the native compiler miscompiles the stage1 compiler, you may -+need to work around this by avoiding non-working parts of the stage1 -+compiler. Use @code{STAGE1_LIBCFLAGS} to this end. -+ -+If you used the flag @option{--enable-languages=@dots{}} to restrict -+the compilers to be built, only those you've actually enabled will be -+built. This will of course only build those runtime libraries, for -+which the particular compiler has been built. Please note, -+that re-defining @env{LANGUAGES} when calling @samp{make} -+@strong{does not} work anymore! -+ -+If the comparison of stage2 and stage3 fails, this normally indicates -+that the stage2 compiler has compiled GCC incorrectly, and is therefore -+a potentially serious bug which you should investigate and report. (On -+a few systems, meaningful comparison of object files is impossible; they -+always appear ``different''. If you encounter this problem, you will -+need to disable comparison in the @file{Makefile}.) -+ -+If you do not want to bootstrap your compiler, you can configure with -+@option{--disable-bootstrap}. In particular cases, you may want to -+bootstrap your compiler even if the target system is not the same as -+the one you are building on: for example, you could build a -+@code{powerpc-unknown-linux-gnu} toolchain on a -+@code{powerpc64-unknown-linux-gnu} host. In this case, pass -+@option{--enable-bootstrap} to the configure script. -+ -+ -+@section Building a cross compiler -+ -+When building a cross compiler, it is not generally possible to do a -+3-stage bootstrap of the compiler. This makes for an interesting problem -+as parts of GCC can only be built with GCC@. -+ -+To build a cross compiler, we first recommend building and installing a -+native compiler. You can then use the native GCC compiler to build the -+cross compiler. The installed native compiler needs to be GCC version -+2.95 or later. -+ -+If the cross compiler is to be built with support for the Java -+programming language and the ability to compile .java source files is -+desired, the installed native compiler used to build the cross -+compiler needs to be the same GCC version as the cross compiler. In -+addition the cross compiler needs to be configured with -+@option{--with-ecj-jar=@dots{}}. -+ -+Assuming you have already installed a native copy of GCC and configured -+your cross compiler, issue the command @command{make}, which performs the -+following steps: -+ -+@itemize @bullet -+@item -+Build host tools necessary to build the compiler. -+ -+@item -+Build target tools for use by the compiler such as binutils (bfd, -+binutils, gas, gprof, ld, and opcodes) -+if they have been individually linked or moved into the top level GCC source -+tree before configuring. -+ -+@item -+Build the compiler (single stage only). -+ -+@item -+Build runtime libraries using the compiler from the previous step. -+@end itemize -+ -+Note that if an error occurs in any step the make process will exit. -+ -+If you are not building GNU binutils in the same source tree as GCC, -+you will need a cross-assembler and cross-linker installed before -+configuring GCC@. Put them in the directory -+@file{@var{prefix}/@var{target}/bin}. Here is a table of the tools -+you should put in this directory: -+ -+@table @file -+@item as -+This should be the cross-assembler. -+ -+@item ld -+This should be the cross-linker. -+ -+@item ar -+This should be the cross-archiver: a program which can manipulate -+archive files (linker libraries) in the target machine's format. -+ -+@item ranlib -+This should be a program to construct a symbol table in an archive file. -+@end table -+ -+The installation of GCC will find these programs in that directory, -+and copy or link them to the proper place to for the cross-compiler to -+find them when run later. -+ -+The easiest way to provide these files is to build the Binutils package. -+Configure it with the same @option{--host} and @option{--target} -+options that you use for configuring GCC, then build and install -+them. They install their executables automatically into the proper -+directory. Alas, they do not support all the targets that GCC -+supports. -+ -+If you are not building a C library in the same source tree as GCC, -+you should also provide the target libraries and headers before -+configuring GCC, specifying the directories with -+@option{--with-sysroot} or @option{--with-headers} and -+@option{--with-libs}. Many targets also require ``start files'' such -+as @file{crt0.o} and -+@file{crtn.o} which are linked into each executable. There may be several -+alternatives for @file{crt0.o}, for use with profiling or other -+compilation options. Check your target's definition of -+@code{STARTFILE_SPEC} to find out what start files it uses. -+ -+@section Building in parallel -+ -+GNU Make 3.79 and above, which is necessary to build GCC, support -+building in parallel. To activate this, you can use @samp{make -j 2} -+instead of @samp{make}. You can also specify a bigger number, and -+in most cases using a value greater than the number of processors in -+your machine will result in fewer and shorter I/O latency hits, thus -+improving overall throughput; this is especially true for slow drives -+and network filesystems. -+ -+@section Building the Ada compiler -+ -+In order to build GNAT, the Ada compiler, you need a working GNAT -+compiler (GCC version 3.4 or later). -+This includes GNAT tools such as @command{gnatmake} and -+@command{gnatlink}, since the Ada front end is written in Ada and -+uses some GNAT-specific extensions. -+ -+In order to build a cross compiler, it is suggested to install -+the new compiler as native first, and then use it to build the cross -+compiler. -+ -+@command{configure} does not test whether the GNAT installation works -+and has a sufficiently recent version; if too old a GNAT version is -+installed, the build will fail unless @option{--enable-languages} is -+used to disable building the Ada front end. -+ -+@env{ADA_INCLUDE_PATH} and @env{ADA_OBJECT_PATH} environment variables -+must not be set when building the Ada compiler, the Ada tools, or the -+Ada runtime libraries. You can check that your build environment is clean -+by verifying that @samp{gnatls -v} lists only one explicit path in each -+section. -+ -+@section Building with profile feedback -+ -+It is possible to use profile feedback to optimize the compiler itself. This -+should result in a faster compiler binary. Experiments done on x86 using gcc -+3.3 showed approximately 7 percent speedup on compiling C programs. To -+bootstrap the compiler with profile feedback, use @code{make profiledbootstrap}. -+ -+When @samp{make profiledbootstrap} is run, it will first build a @code{stage1} -+compiler. This compiler is used to build a @code{stageprofile} compiler -+instrumented to collect execution counts of instruction and branch -+probabilities. Then runtime libraries are compiled with profile collected. -+Finally a @code{stagefeedback} compiler is built using the information collected. -+ -+Unlike standard bootstrap, several additional restrictions apply. The -+compiler used to build @code{stage1} needs to support a 64-bit integral type. -+It is recommended to only use GCC for this. Also parallel make is currently -+not supported since collisions in profile collecting may occur. -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Testing***************************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Testing, Final install, Building, Installing GCC -+@end ifnothtml -+@ifset testhtml -+@ifnothtml -+@chapter Installing GCC: Testing -+@end ifnothtml -+@cindex Testing -+@cindex Installing GCC: Testing -+@cindex Testsuite -+ -+Before you install GCC, we encourage you to run the testsuites and to -+compare your results with results from a similar configuration that have -+been submitted to the -+@uref{http://gcc.gnu.org/ml/gcc-testresults/,,gcc-testresults mailing list}. -+Some of these archived results are linked from the build status lists -+at @uref{http://gcc.gnu.org/buildstat.html}, although not everyone who -+reports a successful build runs the testsuites and submits the results. -+This step is optional and may require you to download additional software, -+but it can give you confidence in your new GCC installation or point out -+problems before you install and start using your new GCC@. -+ -+First, you must have @uref{download.html,,downloaded the testsuites}. -+These are part of the full distribution, but if you downloaded the -+``core'' compiler plus any front ends, you must download the testsuites -+separately. -+ -+Second, you must have the testing tools installed. This includes -+@uref{http://www.gnu.org/software/dejagnu/,,DejaGnu}, Tcl, and Expect; -+the DejaGnu site has links to these. -+ -+If the directories where @command{runtest} and @command{expect} were -+installed are not in the @env{PATH}, you may need to set the following -+environment variables appropriately, as in the following example (which -+assumes that DejaGnu has been installed under @file{/usr/local}): -+ -+@smallexample -+ TCL_LIBRARY = /usr/local/share/tcl8.0 -+ DEJAGNULIBS = /usr/local/share/dejagnu -+@end smallexample -+ -+(On systems such as Cygwin, these paths are required to be actual -+paths, not mounts or links; presumably this is due to some lack of -+portability in the DejaGnu code.) -+ -+ -+Finally, you can run the testsuite (which may take a long time): -+@smallexample -+ cd @var{objdir}; make -k check -+@end smallexample -+ -+This will test various components of GCC, such as compiler -+front ends and runtime libraries. While running the testsuite, DejaGnu -+might emit some harmless messages resembling -+@samp{WARNING: Couldn't find the global config file.} or -+@samp{WARNING: Couldn't find tool init file} that can be ignored. -+ -+If you are testing a cross-compiler, you may want to run the testsuite -+on a simulator as described at @uref{http://gcc.gnu.org/simtest-howto.html}. -+ -+@section How can you run the testsuite on selected tests? -+ -+In order to run sets of tests selectively, there are targets -+@samp{make check-gcc} and @samp{make check-g++} -+in the @file{gcc} subdirectory of the object directory. You can also -+just run @samp{make check} in a subdirectory of the object directory. -+ -+ -+A more selective way to just run all @command{gcc} execute tests in the -+testsuite is to use -+ -+@smallexample -+ make check-gcc RUNTESTFLAGS="execute.exp @var{other-options}" -+@end smallexample -+ -+Likewise, in order to run only the @command{g++} ``old-deja'' tests in -+the testsuite with filenames matching @samp{9805*}, you would use -+ -+@smallexample -+ make check-g++ RUNTESTFLAGS="old-deja.exp=9805* @var{other-options}" -+@end smallexample -+ -+The @file{*.exp} files are located in the testsuite directories of the GCC -+source, the most important ones being @file{compile.exp}, -+@file{execute.exp}, @file{dg.exp} and @file{old-deja.exp}. -+To get a list of the possible @file{*.exp} files, pipe the -+output of @samp{make check} into a file and look at the -+@samp{Running @dots{} .exp} lines. -+ -+@section Passing options and running multiple testsuites -+ -+You can pass multiple options to the testsuite using the -+@samp{--target_board} option of DejaGNU, either passed as part of -+@samp{RUNTESTFLAGS}, or directly to @command{runtest} if you prefer to -+work outside the makefiles. For example, -+ -+@smallexample -+ make check-g++ RUNTESTFLAGS="--target_board=unix/-O3/-fmerge-constants" -+@end smallexample -+ -+will run the standard @command{g++} testsuites (``unix'' is the target name -+for a standard native testsuite situation), passing -+@samp{-O3 -fmerge-constants} to the compiler on every test, i.e., -+slashes separate options. -+ -+You can run the testsuites multiple times using combinations of options -+with a syntax similar to the brace expansion of popular shells: -+ -+@smallexample -+ @dots{}"--target_board=arm-sim\@{-mhard-float,-msoft-float\@}\@{-O1,-O2,-O3,\@}" -+@end smallexample -+ -+(Note the empty option caused by the trailing comma in the final group.) -+The following will run each testsuite eight times using the @samp{arm-sim} -+target, as if you had specified all possible combinations yourself: -+ -+@smallexample -+ --target_board=arm-sim/-mhard-float/-O1 -+ --target_board=arm-sim/-mhard-float/-O2 -+ --target_board=arm-sim/-mhard-float/-O3 -+ --target_board=arm-sim/-mhard-float -+ --target_board=arm-sim/-msoft-float/-O1 -+ --target_board=arm-sim/-msoft-float/-O2 -+ --target_board=arm-sim/-msoft-float/-O3 -+ --target_board=arm-sim/-msoft-float -+@end smallexample -+ -+They can be combined as many times as you wish, in arbitrary ways. This -+list: -+ -+@smallexample -+ @dots{}"--target_board=unix/-Wextra\@{-O3,-fno-strength\@}\@{-fomit-frame,\@}" -+@end smallexample -+ -+will generate four combinations, all involving @samp{-Wextra}. -+ -+The disadvantage to this method is that the testsuites are run in serial, -+which is a waste on multiprocessor systems. For users with GNU Make and -+a shell which performs brace expansion, you can run the testsuites in -+parallel by having the shell perform the combinations and @command{make} -+do the parallel runs. Instead of using @samp{--target_board}, use a -+special makefile target: -+ -+@smallexample -+ make -j@var{N} check-@var{testsuite}//@var{test-target}/@var{option1}/@var{option2}/@dots{} -+@end smallexample -+ -+For example, -+ -+@smallexample -+ make -j3 check-gcc//sh-hms-sim/@{-m1,-m2,-m3,-m3e,-m4@}/@{,-nofpu@} -+@end smallexample -+ -+will run three concurrent ``make-gcc'' testsuites, eventually testing all -+ten combinations as described above. Note that this is currently only -+supported in the @file{gcc} subdirectory. (To see how this works, try -+typing @command{echo} before the example given here.) -+ -+ -+@section Additional testing for Java Class Libraries -+ -+The Java runtime tests can be executed via @samp{make check} -+in the @file{@var{target}/libjava/testsuite} directory in -+the build tree. -+ -+The @uref{http://sourceware.org/mauve/,,Mauve Project} provides -+a suite of tests for the Java Class Libraries. This suite can be run -+as part of libgcj testing by placing the Mauve tree within the libjava -+testsuite at @file{libjava/testsuite/libjava.mauve/mauve}, or by -+specifying the location of that tree when invoking @samp{make}, as in -+@samp{make MAUVEDIR=~/mauve check}. -+ -+@section How to interpret test results -+ -+The result of running the testsuite are various @file{*.sum} and @file{*.log} -+files in the testsuite subdirectories. The @file{*.log} files contain a -+detailed log of the compiler invocations and the corresponding -+results, the @file{*.sum} files summarize the results. These summaries -+contain status codes for all tests: -+ -+@itemize @bullet -+@item -+PASS: the test passed as expected -+@item -+XPASS: the test unexpectedly passed -+@item -+FAIL: the test unexpectedly failed -+@item -+XFAIL: the test failed as expected -+@item -+UNSUPPORTED: the test is not supported on this platform -+@item -+ERROR: the testsuite detected an error -+@item -+WARNING: the testsuite detected a possible problem -+@end itemize -+ -+It is normal for some tests to report unexpected failures. At the -+current time the testing harness does not allow fine grained control -+over whether or not a test is expected to fail. This problem should -+be fixed in future releases. -+ -+ -+@section Submitting test results -+ -+If you want to report the results to the GCC project, use the -+@file{contrib/test_summary} shell script. Start it in the @var{objdir} with -+ -+@smallexample -+ @var{srcdir}/contrib/test_summary -p your_commentary.txt \ -+ -m gcc-testresults@@gcc.gnu.org |sh -+@end smallexample -+ -+This script uses the @command{Mail} program to send the results, so -+make sure it is in your @env{PATH}. The file @file{your_commentary.txt} is -+prepended to the testsuite summary and should contain any special -+remarks you have on your results or your build environment. Please -+do not edit the testsuite result block or the subject line, as these -+messages may be automatically processed. -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Final install*********************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Final install, , Testing, Installing GCC -+@end ifnothtml -+@ifset finalinstallhtml -+@ifnothtml -+@chapter Installing GCC: Final installation -+@end ifnothtml -+ -+Now that GCC has been built (and optionally tested), you can install it with -+@smallexample -+cd @var{objdir}; make install -+@end smallexample -+ -+We strongly recommend to install into a target directory where there is -+no previous version of GCC present. Also, the GNAT runtime should not -+be stripped, as this would break certain features of the debugger that -+depend on this debugging information (catching Ada exceptions for -+instance). -+ -+That step completes the installation of GCC; user level binaries can -+be found in @file{@var{prefix}/bin} where @var{prefix} is the value -+you specified with the @option{--prefix} to configure (or -+@file{/usr/local} by default). (If you specified @option{--bindir}, -+that directory will be used instead; otherwise, if you specified -+@option{--exec-prefix}, @file{@var{exec-prefix}/bin} will be used.) -+Headers for the C++ and Java libraries are installed in -+@file{@var{prefix}/include}; libraries in @file{@var{libdir}} -+(normally @file{@var{prefix}/lib}); internal parts of the compiler in -+@file{@var{libdir}/gcc} and @file{@var{libexecdir}/gcc}; documentation -+in info format in @file{@var{infodir}} (normally -+@file{@var{prefix}/info}). -+ -+When installing cross-compilers, GCC's executables -+are not only installed into @file{@var{bindir}}, that -+is, @file{@var{exec-prefix}/bin}, but additionally into -+@file{@var{exec-prefix}/@var{target-alias}/bin}, if that directory -+exists. Typically, such @dfn{tooldirs} hold target-specific -+binutils, including assembler and linker. -+ -+Installation into a temporary staging area or into a @command{chroot} -+jail can be achieved with the command -+ -+@smallexample -+make DESTDIR=@var{path-to-rootdir} install -+@end smallexample -+ -+@noindent where @var{path-to-rootdir} is the absolute path of -+a directory relative to which all installation paths will be -+interpreted. Note that the directory specified by @code{DESTDIR} -+need not exist yet; it will be created if necessary. -+ -+There is a subtle point with tooldirs and @code{DESTDIR}: -+If you relocate a cross-compiler installation with -+e.g.@: @samp{DESTDIR=@var{rootdir}}, then the directory -+@file{@var{rootdir}/@var{exec-prefix}/@var{target-alias}/bin} will -+be filled with duplicated GCC executables only if it already exists, -+it will not be created otherwise. This is regarded as a feature, -+not as a bug, because it gives slightly more control to the packagers -+using the @code{DESTDIR} feature. -+ -+If you are bootstrapping a released version of GCC then please -+quickly review the build status page for your release, available from -+@uref{http://gcc.gnu.org/buildstat.html}. -+If your system is not listed for the version of GCC that you built, -+send a note to -+@email{gcc@@gcc.gnu.org} indicating -+that you successfully built and installed GCC@. -+Include the following information: -+ -+@itemize @bullet -+@item -+Output from running @file{@var{srcdir}/config.guess}. Do not send -+that file itself, just the one-line output from running it. -+ -+@item -+The output of @samp{gcc -v} for your newly installed @command{gcc}. -+This tells us which version of GCC you built and the options you passed to -+configure. -+ -+@item -+Whether you enabled all languages or a subset of them. If you used a -+full distribution then this information is part of the configure -+options in the output of @samp{gcc -v}, but if you downloaded the -+``core'' compiler plus additional front ends then it isn't apparent -+which ones you built unless you tell us about it. -+ -+@item -+If the build was for GNU/Linux, also include: -+@itemize @bullet -+@item -+The distribution name and version (e.g., Red Hat 7.1 or Debian 2.2.3); -+this information should be available from @file{/etc/issue}. -+ -+@item -+The version of the Linux kernel, available from @samp{uname --version} -+or @samp{uname -a}. -+ -+@item -+The version of glibc you used; for RPM-based systems like Red Hat, -+Mandrake, and SuSE type @samp{rpm -q glibc} to get the glibc version, -+and on systems like Debian and Progeny use @samp{dpkg -l libc6}. -+@end itemize -+For other systems, you can include similar information if you think it is -+relevant. -+ -+@item -+Any other information that you think would be useful to people building -+GCC on the same configuration. The new entry in the build status list -+will include a link to the archived copy of your message. -+@end itemize -+ -+We'd also like to know if the -+@ifnothtml -+@ref{Specific, host/target specific installation notes} -+@end ifnothtml -+@ifhtml -+@uref{specific.html,,host/target specific installation notes} -+@end ifhtml -+didn't include your host/target information or if that information is -+incomplete or out of date. Send a note to -+@email{gcc@@gcc.gnu.org} detailing how the information should be changed. -+ -+If you find a bug, please report it following the -+@uref{../bugs.html,,bug reporting guidelines}. -+ -+If you want to print the GCC manuals, do @samp{cd @var{objdir}; make -+dvi}. You will need to have @command{texi2dvi} (version at least 4.7) -+and @TeX{} installed. This creates a number of @file{.dvi} files in -+subdirectories of @file{@var{objdir}}; these may be converted for -+printing with programs such as @command{dvips}. Alternately, by using -+@samp{make pdf} in place of @samp{make dvi}, you can create documentation -+in the form of @file{.pdf} files; this requires @command{texi2pdf}, which -+is included with Texinfo version 4.8 and later. You can also -+@uref{http://shop.fsf.org/,,buy printed manuals from the -+Free Software Foundation}, though such manuals may not be for the most -+recent version of GCC@. -+ -+If you would like to generate online HTML documentation, do @samp{cd -+@var{objdir}; make html} and HTML will be generated for the gcc manuals in -+@file{@var{objdir}/gcc/HTML}. -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Binaries**************************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Binaries, Specific, Installing GCC, Top -+@end ifnothtml -+@ifset binarieshtml -+@ifnothtml -+@chapter Installing GCC: Binaries -+@end ifnothtml -+@cindex Binaries -+@cindex Installing GCC: Binaries -+ -+We are often asked about pre-compiled versions of GCC@. While we cannot -+provide these for all platforms, below you'll find links to binaries for -+various platforms where creating them by yourself is not easy due to various -+reasons. -+ -+Please note that we did not create these binaries, nor do we -+support them. If you have any problems installing them, please -+contact their makers. -+ -+@itemize -+@item -+AIX: -+@itemize -+@item -+@uref{http://www.bullfreeware.com,,Bull's Freeware and Shareware Archive for AIX}; -+ -+@item -+@uref{http://pware.hvcc.edu,,Hudson Valley Community College Open Source Software for IBM System p}; -+ -+@item -+@uref{http://www.perzl.org/aix/,,AIX 5L and 6 Open Source Packages}. -+@end itemize -+ -+@item -+DOS---@uref{http://www.delorie.com/djgpp/,,DJGPP}. -+ -+@item -+Renesas H8/300[HS]---@uref{http://h8300-hms.sourceforge.net/,,GNU -+Development Tools for the Renesas H8/300[HS] Series}. -+ -+@item -+HP-UX: -+@itemize -+@item -+@uref{http://hpux.cs.utah.edu/,,HP-UX Porting Center}; -+ -+@item -+@uref{ftp://sunsite.informatik.rwth-aachen.de/pub/packages/gcc_hpux/,,Binaries for HP-UX 11.00 at Aachen University of Technology}. -+@end itemize -+ -+@item -+Motorola 68HC11/68HC12---@uref{http://www.gnu-m68hc11.org,,GNU -+Development Tools for the Motorola 68HC11/68HC12}. -+ -+@item -+@uref{http://www.sco.com/skunkware/devtools/index.html#gcc,,SCO -+OpenServer/Unixware}. -+ -+@item -+Solaris 2 (SPARC, Intel)---@uref{http://www.sunfreeware.com/,,Sunfreeware}. -+ -+@item -+SGI---@uref{http://freeware.sgi.com/,,SGI Freeware}. -+ -+@item -+Microsoft Windows: -+@itemize -+@item -+The @uref{http://sourceware.org/cygwin/,,Cygwin} project; -+@item -+The @uref{http://www.mingw.org/,,MinGW} project. -+@end itemize -+ -+@item -+@uref{ftp://ftp.thewrittenword.com/packages/by-name/,,The -+Written Word} offers binaries for -+AIX 4.3.3, 5.1 and 5.2, -+IRIX 6.5, -+Tru64 UNIX 4.0D and 5.1, -+GNU/Linux (i386), -+HP-UX 10.20, 11.00, and 11.11, and -+Solaris/SPARC 2.5.1, 2.6, 7, 8, 9 and 10. -+ -+@item -+@uref{http://www.openpkg.org/,,OpenPKG} offers binaries for quite a -+number of platforms. -+ -+@item -+The @uref{http://gcc.gnu.org/wiki/GFortranBinaries,,GFortran Wiki} has -+links to GNU Fortran binaries for several platforms. -+@end itemize -+ -+In addition to those specific offerings, you can get a binary -+distribution CD-ROM from the -+@uref{http://www.gnu.org/order/order.html,,Free Software Foundation}. -+It contains binaries for a number of platforms, and -+includes not only GCC, but other stuff as well. The current CD does -+not contain the latest version of GCC, but it should allow -+bootstrapping the compiler. An updated version of that disk is in the -+works. -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Specific**************************************************************** -+@ifnothtml -+@comment node-name, next, previous, up -+@node Specific, Old, Binaries, Top -+@end ifnothtml -+@ifset specifichtml -+@ifnothtml -+@chapter Host/target specific installation notes for GCC -+@end ifnothtml -+@cindex Specific -+@cindex Specific installation notes -+@cindex Target specific installation -+@cindex Host specific installation -+@cindex Target specific installation notes -+ -+Please read this document carefully @emph{before} installing the -+GNU Compiler Collection on your machine. -+ -+Note that this list of install notes is @emph{not} a list of supported -+hosts or targets. Not all supported hosts and targets are listed -+here, only the ones that require host-specific or target-specific -+information are. -+ -+@ifhtml -+@itemize -+@item -+@uref{#alpha-x-x,,alpha*-*-*} -+@item -+@uref{#alpha-dec-osf,,alpha*-dec-osf*} -+@item -+@uref{#arc-x-elf,,arc-*-elf} -+@item -+@uref{#arm-x-elf,,arm-*-elf} -+@uref{#arm-x-coff,,arm-*-coff} -+@uref{#arm-x-aout,,arm-*-aout} -+@item -+@uref{#avr,,avr} -+@item -+@uref{#bfin,,Blackfin} -+@item -+@uref{#dos,,DOS} -+@item -+@uref{#x-x-freebsd,,*-*-freebsd*} -+@item -+@uref{#h8300-hms,,h8300-hms} -+@item -+@uref{#hppa-hp-hpux,,hppa*-hp-hpux*} -+@item -+@uref{#hppa-hp-hpux10,,hppa*-hp-hpux10} -+@item -+@uref{#hppa-hp-hpux11,,hppa*-hp-hpux11} -+@item -+@uref{#x-x-linux-gnu,,*-*-linux-gnu} -+@item -+@uref{#ix86-x-linux,,i?86-*-linux*} -+@item -+@uref{#ix86-x-solaris210,,i?86-*-solaris2.10} -+@item -+@uref{#ia64-x-linux,,ia64-*-linux} -+@item -+@uref{#ia64-x-hpux,,ia64-*-hpux*} -+@item -+@uref{#x-ibm-aix,,*-ibm-aix*} -+@item -+@uref{#iq2000-x-elf,,iq2000-*-elf} -+@item -+@uref{#m32c-x-elf,,m32c-*-elf} -+@item -+@uref{#m32r-x-elf,,m32r-*-elf} -+@item -+@uref{#m6811-elf,,m6811-elf} -+@item -+@uref{#m6812-elf,,m6812-elf} -+@item -+@uref{#m68k-x-x,,m68k-*-*} -+@item -+@uref{#m68k-uclinux,,m68k-uclinux} -+@item -+@uref{#mips-x-x,,mips-*-*} -+@item -+@uref{#mips-sgi-irix5,,mips-sgi-irix5} -+@item -+@uref{#mips-sgi-irix6,,mips-sgi-irix6} -+@item -+@uref{#powerpc-x-x,,powerpc*-*-*} -+@item -+@uref{#powerpc-x-darwin,,powerpc-*-darwin*} -+@item -+@uref{#powerpc-x-elf,,powerpc-*-elf} -+@item -+@uref{#powerpc-x-linux-gnu,,powerpc*-*-linux-gnu*} -+@item -+@uref{#powerpc-x-netbsd,,powerpc-*-netbsd*} -+@item -+@uref{#powerpc-x-eabisim,,powerpc-*-eabisim} -+@item -+@uref{#powerpc-x-eabi,,powerpc-*-eabi} -+@item -+@uref{#powerpcle-x-elf,,powerpcle-*-elf} -+@item -+@uref{#powerpcle-x-eabisim,,powerpcle-*-eabisim} -+@item -+@uref{#powerpcle-x-eabi,,powerpcle-*-eabi} -+@item -+@uref{#s390-x-linux,,s390-*-linux*} -+@item -+@uref{#s390x-x-linux,,s390x-*-linux*} -+@item -+@uref{#s390x-ibm-tpf,,s390x-ibm-tpf*} -+@item -+@uref{#x-x-solaris2,,*-*-solaris2*} -+@item -+@uref{#sparc-sun-solaris2,,sparc-sun-solaris2*} -+@item -+@uref{#sparc-sun-solaris27,,sparc-sun-solaris2.7} -+@item -+@uref{#sparc-x-linux,,sparc-*-linux*} -+@item -+@uref{#sparc64-x-solaris2,,sparc64-*-solaris2*} -+@item -+@uref{#sparcv9-x-solaris2,,sparcv9-*-solaris2*} -+@item -+@uref{#x-x-vxworks,,*-*-vxworks*} -+@item -+@uref{#x86-64-x-x,,x86_64-*-*, amd64-*-*} -+@item -+@uref{#xtensa-x-elf,,xtensa*-*-elf} -+@item -+@uref{#xtensa-x-linux,,xtensa*-*-linux*} -+@item -+@uref{#windows,,Microsoft Windows} -+@item -+@uref{#x-x-cygwin,,*-*-cygwin} -+@item -+@uref{#x-x-interix,,*-*-interix} -+@item -+@uref{#x-x-mingw,,*-*-mingw} -+@item -+@uref{#os2,,OS/2} -+@item -+@uref{#older,,Older systems} -+@end itemize -+ -+@itemize -+@item -+@uref{#elf,,all ELF targets} (SVR4, Solaris 2, etc.) -+@end itemize -+@end ifhtml -+ -+ -+@html -+<!-- -------- host/target specific issues start here ---------------- --> -+<hr /> -+@end html -+@heading @anchor{alpha-x-x}alpha*-*-* -+ -+This section contains general configuration information for all -+alpha-based platforms using ELF (in particular, ignore this section for -+DEC OSF/1, Digital UNIX and Tru64 UNIX)@. In addition to reading this -+section, please read all other sections that match your target. -+ -+We require binutils 2.11.2 or newer. -+Previous binutils releases had a number of problems with DWARF 2 -+debugging information, not the least of which is incorrect linking of -+shared libraries. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{alpha-dec-osf}alpha*-dec-osf* -+Systems using processors that implement the DEC Alpha architecture and -+are running the DEC/Compaq Unix (DEC OSF/1, Digital UNIX, or Compaq -+Tru64 UNIX) operating system, for example the DEC Alpha AXP systems. -+ -+As of GCC 3.2, versions before @code{alpha*-dec-osf4} are no longer -+supported. (These are the versions which identify themselves as DEC -+OSF/1.) -+ -+In Digital Unix V4.0, virtual memory exhausted bootstrap failures -+may be fixed by configuring with @option{--with-gc=simple}, -+reconfiguring Kernel Virtual Memory and Swap parameters -+per the @command{/usr/sbin/sys_check} Tuning Suggestions, -+or applying the patch in -+@uref{http://gcc.gnu.org/ml/gcc/2002-08/msg00822.html}. -+ -+In Tru64 UNIX V5.1, Compaq introduced a new assembler that does not -+currently (2001-06-13) work with @command{mips-tfile}. As a workaround, -+we need to use the old assembler, invoked via the barely documented -+@option{-oldas} option. To bootstrap GCC, you either need to use the -+Compaq C Compiler: -+ -+@smallexample -+ % CC=cc @var{srcdir}/configure [@var{options}] [@var{target}] -+@end smallexample -+ -+or you can use a copy of GCC 2.95.3 or higher built on Tru64 UNIX V4.0: -+ -+@smallexample -+ % CC=gcc -Wa,-oldas @var{srcdir}/configure [@var{options}] [@var{target}] -+@end smallexample -+ -+As of GNU binutils 2.11.2, neither GNU @command{as} nor GNU @command{ld} -+are supported on Tru64 UNIX, so you must not configure GCC with -+@option{--with-gnu-as} or @option{--with-gnu-ld}. -+ -+GCC writes a @samp{.verstamp} directive to the assembler output file -+unless it is built as a cross-compiler. It gets the version to use from -+the system header file @file{/usr/include/stamp.h}. If you install a -+new version of DEC Unix, you should rebuild GCC to pick up the new version -+stamp. -+ -+@samp{make compare} may fail on old versions of DEC Unix unless you add -+@option{-save-temps} to @code{BOOT_CFLAGS}. On these systems, the name -+of the assembler input file is stored in the object file, and that makes -+comparison fail if it differs between the @code{stage1} and -+@code{stage2} compilations. The option @option{-save-temps} forces a -+fixed name to be used for the assembler input file, instead of a -+randomly chosen name in @file{/tmp}. Do not add @option{-save-temps} -+unless the comparisons fail without that option. If you add -+@option{-save-temps}, you will have to manually delete the @samp{.i} and -+@samp{.s} files after each series of compilations. -+ -+GCC now supports both the native (ECOFF) debugging format used by DBX -+and GDB and an encapsulated STABS format for use only with GDB@. See the -+discussion of the @option{--with-stabs} option of @file{configure} above -+for more information on these formats and how to select them. -+ -+There is a bug in DEC's assembler that produces incorrect line numbers -+for ECOFF format when the @samp{.align} directive is used. To work -+around this problem, GCC will not emit such alignment directives -+while writing ECOFF format debugging information even if optimization is -+being performed. Unfortunately, this has the very undesirable -+side-effect that code addresses when @option{-O} is specified are -+different depending on whether or not @option{-g} is also specified. -+ -+To avoid this behavior, specify @option{-gstabs+} and use GDB instead of -+DBX@. DEC is now aware of this problem with the assembler and hopes to -+provide a fix shortly. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{arc-x-elf}arc-*-elf -+Argonaut ARC processor. -+This configuration is intended for embedded systems. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{arm-x-elf}arm-*-elf -+ARM-family processors. Subtargets that use the ELF object format -+require GNU binutils 2.13 or newer. Such subtargets include: -+@code{arm-*-freebsd}, @code{arm-*-netbsdelf}, @code{arm-*-*linux} -+and @code{arm-*-rtems}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{arm-x-coff}arm-*-coff -+ARM-family processors. Note that there are two different varieties -+of PE format subtarget supported: @code{arm-wince-pe} and -+@code{arm-pe} as well as a standard COFF target @code{arm-*-coff}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{arm-x-aout}arm-*-aout -+ARM-family processors. These targets support the AOUT file format: -+@code{arm-*-aout}, @code{arm-*-netbsd}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{avr}avr -+ -+ATMEL AVR-family micro controllers. These are used in embedded -+applications. There are no standard Unix configurations. -+@ifnothtml -+@xref{AVR Options,, AVR Options, gcc, Using the GNU Compiler -+Collection (GCC)}, -+@end ifnothtml -+@ifhtml -+See ``AVR Options'' in the main manual -+@end ifhtml -+for the list of supported MCU types. -+ -+Use @samp{configure --target=avr --enable-languages="c"} to configure GCC@. -+ -+Further installation notes and other useful information about AVR tools -+can also be obtained from: -+ -+@itemize @bullet -+@item -+@uref{http://www.nongnu.org/avr/,,http://www.nongnu.org/avr/} -+@item -+@uref{http://www.amelek.gda.pl/avr/,,http://www.amelek.gda.pl/avr/} -+@end itemize -+ -+We @emph{strongly} recommend using binutils 2.13 or newer. -+ -+The following error: -+@smallexample -+ Error: register required -+@end smallexample -+ -+indicates that you should upgrade to a newer version of the binutils. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{bfin}Blackfin -+ -+The Blackfin processor, an Analog Devices DSP. -+@ifnothtml -+@xref{Blackfin Options,, Blackfin Options, gcc, Using the GNU Compiler -+Collection (GCC)}, -+@end ifnothtml -+@ifhtml -+See ``Blackfin Options'' in the main manual -+@end ifhtml -+ -+More information, and a version of binutils with support for this processor, -+is available at @uref{http://blackfin.uclinux.org} -+ -+@html -+<hr /> -+@end html -+@heading @anchor{cris}CRIS -+ -+CRIS is the CPU architecture in Axis Communications ETRAX system-on-a-chip -+series. These are used in embedded applications. -+ -+@ifnothtml -+@xref{CRIS Options,, CRIS Options, gcc, Using the GNU Compiler -+Collection (GCC)}, -+@end ifnothtml -+@ifhtml -+See ``CRIS Options'' in the main manual -+@end ifhtml -+for a list of CRIS-specific options. -+ -+There are a few different CRIS targets: -+@table @code -+@item cris-axis-elf -+Mainly for monolithic embedded systems. Includes a multilib for the -+@samp{v10} core used in @samp{ETRAX 100 LX}. -+@item cris-axis-linux-gnu -+A GNU/Linux port for the CRIS architecture, currently targeting -+@samp{ETRAX 100 LX} by default. -+@end table -+ -+For @code{cris-axis-elf} you need binutils 2.11 -+or newer. For @code{cris-axis-linux-gnu} you need binutils 2.12 or newer. -+ -+Pre-packaged tools can be obtained from -+@uref{ftp://ftp.axis.com/pub/axis/tools/cris/compiler-kit/}. More -+information about this platform is available at -+@uref{http://developer.axis.com/}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{crx}CRX -+ -+The CRX CompactRISC architecture is a low-power 32-bit architecture with -+fast context switching and architectural extensibility features. -+ -+@ifnothtml -+@xref{CRX Options,, CRX Options, gcc, Using and Porting the GNU Compiler -+Collection (GCC)}, -+@end ifnothtml -+ -+@ifhtml -+See ``CRX Options'' in the main manual for a list of CRX-specific options. -+@end ifhtml -+ -+Use @samp{configure --target=crx-elf --enable-languages=c,c++} to configure -+GCC@ for building a CRX cross-compiler. The option @samp{--target=crx-elf} -+is also used to build the @samp{newlib} C library for CRX. -+ -+It is also possible to build libstdc++-v3 for the CRX architecture. This -+needs to be done in a separate step with the following configure settings: -+@samp{gcc/libstdc++-v3/configure --host=crx-elf --with-newlib -+--enable-sjlj-exceptions --enable-cxx-flags='-fexceptions -frtti'} -+ -+@html -+<hr /> -+@end html -+@heading @anchor{dos}DOS -+ -+Please have a look at the @uref{binaries.html,,binaries page}. -+ -+You cannot install GCC by itself on MSDOS; it will not compile under -+any MSDOS compiler except itself. You need to get the complete -+compilation package DJGPP, which includes binaries as well as sources, -+and includes all the necessary compilation tools and libraries. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-freebsd}*-*-freebsd* -+ -+The version of binutils installed in @file{/usr/bin} probably works with -+this release of GCC@. However, on FreeBSD 4, bootstrapping against the -+latest FSF binutils is known to improve overall testsuite results; and, -+on FreeBSD/alpha, using binutils 2.14 or later is required to build libjava. -+ -+Support for FreeBSD 1 was discontinued in GCC 3.2. -+ -+Support for FreeBSD 2 will be discontinued after GCC 3.4. The -+following was true for GCC 3.1 but the current status is unknown. -+For FreeBSD 2 or any mutant a.out versions of FreeBSD 3: All -+configuration support and files as shipped with GCC 2.95 are still in -+place. FreeBSD 2.2.7 has been known to bootstrap completely; however, -+it is unknown which version of binutils was used (it is assumed that it -+was the system copy in @file{/usr/bin}) and C++ EH failures were noted. -+ -+For FreeBSD using the ELF file format: DWARF 2 debugging is now the -+default for all CPU architectures. It had been the default on -+FreeBSD/alpha since its inception. You may use @option{-gstabs} instead -+of @option{-g}, if you really want the old debugging format. There are -+no known issues with mixing object files and libraries with different -+debugging formats. Otherwise, this release of GCC should now match more -+of the configuration used in the stock FreeBSD configuration of GCC@. In -+particular, @option{--enable-threads} is now configured by default. -+However, as a general user, do not attempt to replace the system -+compiler with this release. Known to bootstrap and check with good -+results on FreeBSD 4.9-STABLE and 5-CURRENT@. In the past, known to -+bootstrap and check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2, -+4.3, 4.4, 4.5, 4.8-STABLE@. -+ -+In principle, @option{--enable-threads} is now compatible with -+@option{--enable-libgcj} on FreeBSD@. However, it has only been built -+and tested on @samp{i386-*-freebsd[45]} and @samp{alpha-*-freebsd[45]}. -+The static -+library may be incorrectly built (symbols are missing at link time). -+There is a rare timing-based startup hang (probably involves an -+assumption about the thread library). Multi-threaded boehm-gc (required for -+libjava) exposes severe threaded signal-handling bugs on FreeBSD before -+4.5-RELEASE@. Other CPU architectures -+supported by FreeBSD will require additional configuration tuning in, at -+the very least, both boehm-gc and libffi. -+ -+Shared @file{libgcc_s.so} is now built and installed by default. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{h8300-hms}h8300-hms -+Renesas H8/300 series of processors. -+ -+Please have a look at the @uref{binaries.html,,binaries page}. -+ -+The calling convention and structure layout has changed in release 2.6. -+All code must be recompiled. The calling convention now passes the -+first three arguments in function calls in registers. Structures are no -+longer a multiple of 2 bytes. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{hppa-hp-hpux}hppa*-hp-hpux* -+Support for HP-UX version 9 and older was discontinued in GCC 3.4. -+ -+We require using gas/binutils on all hppa platforms. Version 2.19 or -+later is recommended. -+ -+It may be helpful to configure GCC with the -+@uref{./configure.html#with-gnu-as,,@option{--with-gnu-as}} and -+@option{--with-as=@dots{}} options to ensure that GCC can find GAS@. -+ -+The HP assembler should not be used with GCC. It is rarely tested and may -+not work. It shouldn't be used with any languages other than C due to its -+many limitations. -+ -+Specifically, @option{-g} does not work (HP-UX uses a peculiar debugging -+format which GCC does not know about). It also inserts timestamps -+into each object file it creates, causing the 3-stage comparison test to -+fail during a bootstrap. You should be able to continue by saying -+@samp{make all-host all-target} after getting the failure from @samp{make}. -+ -+Various GCC features are not supported. For example, it does not support weak -+symbols or alias definitions. As a result, explicit template instantiations -+are required when using C++. This makes it difficult if not impossible to -+build many C++ applications. -+ -+There are two default scheduling models for instructions. These are -+PROCESSOR_7100LC and PROCESSOR_8000. They are selected from the pa-risc -+architecture specified for the target machine when configuring. -+PROCESSOR_8000 is the default. PROCESSOR_7100LC is selected when -+the target is a @samp{hppa1*} machine. -+ -+The PROCESSOR_8000 model is not well suited to older processors. Thus, -+it is important to completely specify the machine architecture when -+configuring if you want a model other than PROCESSOR_8000. The macro -+TARGET_SCHED_DEFAULT can be defined in BOOT_CFLAGS if a different -+default scheduling model is desired. -+ -+As of GCC 4.0, GCC uses the UNIX 95 namespace for HP-UX 10.10 -+through 11.00, and the UNIX 98 namespace for HP-UX 11.11 and later. -+This namespace change might cause problems when bootstrapping with -+an earlier version of GCC or the HP compiler as essentially the same -+namespace is required for an entire build. This problem can be avoided -+in a number of ways. With HP cc, @env{UNIX_STD} can be set to @samp{95} -+or @samp{98}. Another way is to add an appropriate set of predefines -+to @env{CC}. The description for the @option{munix=} option contains -+a list of the predefines used with each standard. -+ -+More specific information to @samp{hppa*-hp-hpux*} targets follows. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{hppa-hp-hpux10}hppa*-hp-hpux10 -+ -+For hpux10.20, we @emph{highly} recommend you pick up the latest sed patch -+@code{PHCO_19798} from HP@. HP has two sites which provide patches free of -+charge: -+ -+@itemize @bullet -+@item -+@html -+<a href="http://us.itrc.hp.com/service/home/home.do">US, Canada, Asia-Pacific, and -+Latin-America</a> -+@end html -+@ifnothtml -+@uref{http://us.itrc.hp.com/service/home/home.do,,} US, Canada, Asia-Pacific, -+and Latin-America. -+@end ifnothtml -+@item -+@uref{http://europe.itrc.hp.com/service/home/home.do,,} Europe. -+@end itemize -+ -+The C++ ABI has changed incompatibly in GCC 4.0. COMDAT subspaces are -+used for one-only code and data. This resolves many of the previous -+problems in using C++ on this target. However, the ABI is not compatible -+with the one implemented under HP-UX 11 using secondary definitions. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{hppa-hp-hpux11}hppa*-hp-hpux11 -+ -+GCC 3.0 and up support HP-UX 11. GCC 2.95.x is not supported and cannot -+be used to compile GCC 3.0 and up. -+ -+The libffi and libjava libraries haven't been ported to 64-bit HP-UX@ -+and don't build. -+ -+Refer to @uref{binaries.html,,binaries} for information about obtaining -+precompiled GCC binaries for HP-UX@. Precompiled binaries must be obtained -+to build the Ada language as it can't be bootstrapped using C@. Ada is -+only available for the 32-bit PA-RISC runtime. -+ -+Starting with GCC 3.4 an ISO C compiler is required to bootstrap. The -+bundled compiler supports only traditional C; you will need either HP's -+unbundled compiler, or a binary distribution of GCC@. -+ -+It is possible to build GCC 3.3 starting with the bundled HP compiler, -+but the process requires several steps. GCC 3.3 can then be used to -+build later versions. The fastjar program contains ISO C code and -+can't be built with the HP bundled compiler. This problem can be -+avoided by not building the Java language. For example, use the -+@option{--enable-languages="c,c++,f77,objc"} option in your configure -+command. -+ -+There are several possible approaches to building the distribution. -+Binutils can be built first using the HP tools. Then, the GCC -+distribution can be built. The second approach is to build GCC -+first using the HP tools, then build binutils, then rebuild GCC@. -+There have been problems with various binary distributions, so it -+is best not to start from a binary distribution. -+ -+On 64-bit capable systems, there are two distinct targets. Different -+installation prefixes must be used if both are to be installed on -+the same system. The @samp{hppa[1-2]*-hp-hpux11*} target generates code -+for the 32-bit PA-RISC runtime architecture and uses the HP linker. -+The @samp{hppa64-hp-hpux11*} target generates 64-bit code for the -+PA-RISC 2.0 architecture. -+ -+The script config.guess now selects the target type based on the compiler -+detected during configuration. You must define @env{PATH} or @env{CC} so -+that configure finds an appropriate compiler for the initial bootstrap. -+When @env{CC} is used, the definition should contain the options that are -+needed whenever @env{CC} is used. -+ -+Specifically, options that determine the runtime architecture must be -+in @env{CC} to correctly select the target for the build. It is also -+convenient to place many other compiler options in @env{CC}. For example, -+@env{CC="cc -Ac +DA2.0W -Wp,-H16376 -D_CLASSIC_TYPES -D_HPUX_SOURCE"} -+can be used to bootstrap the GCC 3.3 branch with the HP compiler in -+64-bit K&R/bundled mode. The @option{+DA2.0W} option will result in -+the automatic selection of the @samp{hppa64-hp-hpux11*} target. The -+macro definition table of cpp needs to be increased for a successful -+build with the HP compiler. _CLASSIC_TYPES and _HPUX_SOURCE need to -+be defined when building with the bundled compiler, or when using the -+@option{-Ac} option. These defines aren't necessary with @option{-Ae}. -+ -+It is best to explicitly configure the @samp{hppa64-hp-hpux11*} target -+with the @option{--with-ld=@dots{}} option. This overrides the standard -+search for ld. The two linkers supported on this target require different -+commands. The default linker is determined during configuration. As a -+result, it's not possible to switch linkers in the middle of a GCC build. -+This has been reported to sometimes occur in unified builds of binutils -+and GCC@. -+ -+A recent linker patch must be installed for the correct operation of -+GCC 3.3 and later. @code{PHSS_26559} and @code{PHSS_24304} are the -+oldest linker patches that are known to work. They are for HP-UX -+11.00 and 11.11, respectively. @code{PHSS_24303}, the companion to -+@code{PHSS_24304}, might be usable but it hasn't been tested. These -+patches have been superseded. Consult the HP patch database to obtain -+the currently recommended linker patch for your system. -+ -+The patches are necessary for the support of weak symbols on the -+32-bit port, and for the running of initializers and finalizers. Weak -+symbols are implemented using SOM secondary definition symbols. Prior -+to HP-UX 11, there are bugs in the linker support for secondary symbols. -+The patches correct a problem of linker core dumps creating shared -+libraries containing secondary symbols, as well as various other -+linking issues involving secondary symbols. -+ -+GCC 3.3 uses the ELF DT_INIT_ARRAY and DT_FINI_ARRAY capabilities to -+run initializers and finalizers on the 64-bit port. The 32-bit port -+uses the linker @option{+init} and @option{+fini} options for the same -+purpose. The patches correct various problems with the +init/+fini -+options, including program core dumps. Binutils 2.14 corrects a -+problem on the 64-bit port resulting from HP's non-standard use of -+the .init and .fini sections for array initializers and finalizers. -+ -+Although the HP and GNU linkers are both supported for the -+@samp{hppa64-hp-hpux11*} target, it is strongly recommended that the -+HP linker be used for link editing on this target. -+ -+At this time, the GNU linker does not support the creation of long -+branch stubs. As a result, it can't successfully link binaries -+containing branch offsets larger than 8 megabytes. In addition, -+there are problems linking shared libraries, linking executables -+with @option{-static}, and with dwarf2 unwind and exception support. -+It also doesn't provide stubs for internal calls to global functions -+in shared libraries, so these calls can't be overloaded. -+ -+The HP dynamic loader does not support GNU symbol versioning, so symbol -+versioning is not supported. It may be necessary to disable symbol -+versioning with @option{--disable-symvers} when using GNU ld. -+ -+POSIX threads are the default. The optional DCE thread library is not -+supported, so @option{--enable-threads=dce} does not work. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-linux-gnu}*-*-linux-gnu -+ -+Versions of libstdc++-v3 starting with 3.2.1 require bug fixes present -+in glibc 2.2.5 and later. More information is available in the -+libstdc++-v3 documentation. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{ix86-x-linux}i?86-*-linux* -+ -+As of GCC 3.3, binutils 2.13.1 or later is required for this platform. -+See @uref{http://gcc.gnu.org/PR10877,,bug 10877} for more information. -+ -+If you receive Signal 11 errors when building on GNU/Linux, then it is -+possible you have a hardware problem. Further information on this can be -+found on @uref{http://www.bitwizard.nl/sig11/,,www.bitwizard.nl}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{ix86-x-solaris210}i?86-*-solaris2.10 -+Use this for Solaris 10 or later on x86 and x86-64 systems. This -+configuration is supported by GCC 4.0 and later versions only. -+ -+It is recommended that you configure GCC to use the GNU assembler in -+@file{/usr/sfw/bin/gas} but the Sun linker, using the options -+@option{--with-gnu-as --with-as=/usr/sfw/bin/gas --without-gnu-ld -+--with-ld=/usr/ccs/bin/ld}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{ia64-x-linux}ia64-*-linux -+IA-64 processor (also known as IPF, or Itanium Processor Family) -+running GNU/Linux. -+ -+If you are using the installed system libunwind library with -+@option{--with-system-libunwind}, then you must use libunwind 0.98 or -+later. -+ -+None of the following versions of GCC has an ABI that is compatible -+with any of the other versions in this list, with the exception that -+Red Hat 2.96 and Trillian 000171 are compatible with each other: -+3.1, 3.0.2, 3.0.1, 3.0, Red Hat 2.96, and Trillian 000717. -+This primarily affects C++ programs and programs that create shared libraries. -+GCC 3.1 or later is recommended for compiling linux, the kernel. -+As of version 3.1 GCC is believed to be fully ABI compliant, and hence no -+more major ABI changes are expected. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{ia64-x-hpux}ia64-*-hpux* -+Building GCC on this target requires the GNU Assembler. The bundled HP -+assembler will not work. To prevent GCC from using the wrong assembler, -+the option @option{--with-gnu-as} may be necessary. -+ -+The GCC libunwind library has not been ported to HPUX@. This means that for -+GCC versions 3.2.3 and earlier, @option{--enable-libunwind-exceptions} -+is required to build GCC@. For GCC 3.3 and later, this is the default. -+For gcc 3.4.3 and later, @option{--enable-libunwind-exceptions} is -+removed and the system libunwind library will always be used. -+ -+@html -+<hr /> -+<!-- rs6000-ibm-aix*, powerpc-ibm-aix* --> -+@end html -+@heading @anchor{x-ibm-aix}*-ibm-aix* -+Support for AIX version 3 and older was discontinued in GCC 3.4. -+ -+``out of memory'' bootstrap failures may indicate a problem with -+process resource limits (ulimit). Hard limits are configured in the -+@file{/etc/security/limits} system configuration file. -+ -+To speed up the configuration phases of bootstrapping and installing GCC, -+one may use GNU Bash instead of AIX @command{/bin/sh}, e.g., -+ -+@smallexample -+ % CONFIG_SHELL=/opt/freeware/bin/bash -+ % export CONFIG_SHELL -+@end smallexample -+ -+and then proceed as described in @uref{build.html,,the build -+instructions}, where we strongly recommend specifying an absolute path -+to invoke @var{srcdir}/configure. -+ -+Because GCC on AIX is built as a 32-bit executable by default, -+(although it can generate 64-bit programs) the GMP and MPFR libraries -+required by gfortran must be 32-bit libraries. Building GMP and MPFR -+as static archive libraries works better than shared libraries. -+ -+Errors involving @code{alloca} when building GCC generally are due -+to an incorrect definition of @code{CC} in the Makefile or mixing files -+compiled with the native C compiler and GCC@. During the stage1 phase of -+the build, the native AIX compiler @strong{must} be invoked as @command{cc} -+(not @command{xlc}). Once @command{configure} has been informed of -+@command{xlc}, one needs to use @samp{make distclean} to remove the -+configure cache files and ensure that @env{CC} environment variable -+does not provide a definition that will confuse @command{configure}. -+If this error occurs during stage2 or later, then the problem most likely -+is the version of Make (see above). -+ -+The native @command{as} and @command{ld} are recommended for bootstrapping -+on AIX 4 and required for bootstrapping on AIX 5L@. The GNU Assembler -+reports that it supports WEAK symbols on AIX 4, which causes GCC to try to -+utilize weak symbol functionality although it is not supported. The GNU -+Assembler and Linker do not support AIX 5L sufficiently to bootstrap GCC@. -+The native AIX tools do interoperate with GCC@. -+ -+Building @file{libstdc++.a} requires a fix for an AIX Assembler bug -+APAR IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1). It also requires a -+fix for another AIX Assembler bug and a co-dependent AIX Archiver fix -+referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1) -+ -+@samp{libstdc++} in GCC 3.4 increments the major version number of the -+shared object and GCC installation places the @file{libstdc++.a} -+shared library in a common location which will overwrite the and GCC -+3.3 version of the shared library. Applications either need to be -+re-linked against the new shared library or the GCC 3.1 and GCC 3.3 -+versions of the @samp{libstdc++} shared object needs to be available -+to the AIX runtime loader. The GCC 3.1 @samp{libstdc++.so.4}, if -+present, and GCC 3.3 @samp{libstdc++.so.5} shared objects can be -+installed for runtime dynamic loading using the following steps to set -+the @samp{F_LOADONLY} flag in the shared object for @emph{each} -+multilib @file{libstdc++.a} installed: -+ -+Extract the shared objects from the currently installed -+@file{libstdc++.a} archive: -+@smallexample -+ % ar -x libstdc++.a libstdc++.so.4 libstdc++.so.5 -+@end smallexample -+ -+Enable the @samp{F_LOADONLY} flag so that the shared object will be -+available for runtime dynamic loading, but not linking: -+@smallexample -+ % strip -e libstdc++.so.4 libstdc++.so.5 -+@end smallexample -+ -+Archive the runtime-only shared object in the GCC 3.4 -+@file{libstdc++.a} archive: -+@smallexample -+ % ar -q libstdc++.a libstdc++.so.4 libstdc++.so.5 -+@end smallexample -+ -+Linking executables and shared libraries may produce warnings of -+duplicate symbols. The assembly files generated by GCC for AIX always -+have included multiple symbol definitions for certain global variable -+and function declarations in the original program. The warnings should -+not prevent the linker from producing a correct library or runnable -+executable. -+ -+AIX 4.3 utilizes a ``large format'' archive to support both 32-bit and -+64-bit object modules. The routines provided in AIX 4.3.0 and AIX 4.3.1 -+to parse archive libraries did not handle the new format correctly. -+These routines are used by GCC and result in error messages during -+linking such as ``not a COFF file''. The version of the routines shipped -+with AIX 4.3.1 should work for a 32-bit environment. The @option{-g} -+option of the archive command may be used to create archives of 32-bit -+objects using the original ``small format''. A correct version of the -+routines is shipped with AIX 4.3.2 and above. -+ -+Some versions of the AIX binder (linker) can fail with a relocation -+overflow severe error when the @option{-bbigtoc} option is used to link -+GCC-produced object files into an executable that overflows the TOC@. A fix -+for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is -+available from IBM Customer Support and from its -+@uref{http://techsupport.services.ibm.com/,,techsupport.services.ibm.com} -+website as PTF U455193. -+ -+The AIX 4.3.2.1 linker (bos.rte.bind_cmds Level 4.3.2.1) will dump core -+with a segmentation fault when invoked by any version of GCC@. A fix for -+APAR IX87327 is available from IBM Customer Support and from its -+@uref{http://techsupport.services.ibm.com/,,techsupport.services.ibm.com} -+website as PTF U461879. This fix is incorporated in AIX 4.3.3 and above. -+ -+The initial assembler shipped with AIX 4.3.0 generates incorrect object -+files. A fix for APAR IX74254 (64BIT DISASSEMBLED OUTPUT FROM COMPILER FAILS -+TO ASSEMBLE/BIND) is available from IBM Customer Support and from its -+@uref{http://techsupport.services.ibm.com/,,techsupport.services.ibm.com} -+website as PTF U453956. This fix is incorporated in AIX 4.3.1 and above. -+ -+AIX provides National Language Support (NLS)@. Compilers and assemblers -+use NLS to support locale-specific representations of various data -+formats including floating-point numbers (e.g., @samp{.} vs @samp{,} for -+separating decimal fractions). There have been problems reported where -+GCC does not produce the same floating-point formats that the assembler -+expects. If one encounters this problem, set the @env{LANG} -+environment variable to @samp{C} or @samp{En_US}. -+ -+By default, GCC for AIX 4.1 and above produces code that can be used on -+both Power or PowerPC processors. -+ -+A default can be specified with the @option{-mcpu=@var{cpu_type}} -+switch and using the configure option @option{--with-cpu-@var{cpu_type}}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{iq2000-x-elf}iq2000-*-elf -+Vitesse IQ2000 processors. These are used in embedded -+applications. There are no standard Unix configurations. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m32c-x-elf}m32c-*-elf -+Renesas M32C processor. -+This configuration is intended for embedded systems. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m32r-x-elf}m32r-*-elf -+Renesas M32R processor. -+This configuration is intended for embedded systems. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m6811-elf}m6811-elf -+Motorola 68HC11 family micro controllers. These are used in embedded -+applications. There are no standard Unix configurations. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m6812-elf}m6812-elf -+Motorola 68HC12 family micro controllers. These are used in embedded -+applications. There are no standard Unix configurations. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m68k-x-x}m68k-*-* -+By default, @samp{m68k-*-aout}, @samp{m68k-*-coff*}, -+@samp{m68k-*-elf*}, @samp{m68k-*-rtems}, @samp{m68k-*-uclinux} and -+@samp{m68k-*-linux} -+build libraries for both M680x0 and ColdFire processors. If you only -+need the M680x0 libraries, you can omit the ColdFire ones by passing -+@option{--with-arch=m68k} to @command{configure}. Alternatively, you -+can omit the M680x0 libraries by passing @option{--with-arch=cf} to -+@command{configure}. These targets default to 5206 or 5475 code as -+appropriate for the target system when -+configured with @option{--with-arch=cf} and 68020 code otherwise. -+ -+The @samp{m68k-*-netbsd} and -+@samp{m68k-*-openbsd} targets also support the @option{--with-arch} -+option. They will generate ColdFire CFV4e code when configured with -+@option{--with-arch=cf} and 68020 code otherwise. -+ -+You can override the default processors listed above by configuring -+with @option{--with-cpu=@var{target}}. This @var{target} can either -+be a @option{-mcpu} argument or one of the following values: -+@samp{m68000}, @samp{m68010}, @samp{m68020}, @samp{m68030}, -+@samp{m68040}, @samp{m68060}, @samp{m68020-40} and @samp{m68020-60}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{m68k-x-uclinux}m68k-*-uclinux -+GCC 4.3 changed the uClinux configuration so that it uses the -+@samp{m68k-linux-gnu} ABI rather than the @samp{m68k-elf} ABI. -+It also added improved support for C++ and flat shared libraries, -+both of which were ABI changes. However, you can still use the -+original ABI by configuring for @samp{m68k-uclinuxoldabi} or -+@samp{m68k-@var{vendor}-uclinuxoldabi}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{mips-x-x}mips-*-* -+If on a MIPS system you get an error message saying ``does not have gp -+sections for all it's [sic] sectons [sic]'', don't worry about it. This -+happens whenever you use GAS with the MIPS linker, but there is not -+really anything wrong, and it is okay to use the output file. You can -+stop such warnings by installing the GNU linker. -+ -+It would be nice to extend GAS to produce the gp tables, but they are -+optional, and there should not be a warning about their absence. -+ -+The libstdc++ atomic locking routines for MIPS targets requires MIPS II -+and later. A patch went in just after the GCC 3.3 release to -+make @samp{mips*-*-*} use the generic implementation instead. You can also -+configure for @samp{mipsel-elf} as a workaround. The -+@samp{mips*-*-linux*} target continues to use the MIPS II routines. More -+work on this is expected in future releases. -+ -+@c If you make --with-llsc the default for another target, please also -+@c update the description of the --with-llsc option. -+ -+The built-in @code{__sync_*} functions are available on MIPS II and -+later systems and others that support the @samp{ll}, @samp{sc} and -+@samp{sync} instructions. This can be overridden by passing -+@option{--with-llsc} or @option{--without-llsc} when configuring GCC. -+Since the Linux kernel emulates these instructions if they are -+missing, the default for @samp{mips*-*-linux*} targets is -+@option{--with-llsc}. The @option{--with-llsc} and -+@option{--without-llsc} configure options may be overridden at compile -+time by passing the @option{-mllsc} or @option{-mno-llsc} options to -+the compiler. -+ -+MIPS systems check for division by zero (unless -+@option{-mno-check-zero-division} is passed to the compiler) by -+generating either a conditional trap or a break instruction. Using -+trap results in smaller code, but is only supported on MIPS II and -+later. Also, some versions of the Linux kernel have a bug that -+prevents trap from generating the proper signal (@code{SIGFPE}). To enable -+the use of break, use the @option{--with-divide=breaks} -+@command{configure} option when configuring GCC@. The default is to -+use traps on systems that support them. -+ -+Cross-compilers for the MIPS as target using the MIPS assembler -+currently do not work, because the auxiliary programs -+@file{mips-tdump.c} and @file{mips-tfile.c} can't be compiled on -+anything but a MIPS@. It does work to cross compile for a MIPS -+if you use the GNU assembler and linker. -+ -+The assembler from GNU binutils 2.17 and earlier has a bug in the way -+it sorts relocations for REL targets (o32, o64, EABI). This can cause -+bad code to be generated for simple C++ programs. Also the linker -+from GNU binutils versions prior to 2.17 has a bug which causes the -+runtime linker stubs in very large programs, like @file{libgcj.so}, to -+be incorrectly generated. GNU Binutils 2.18 and later (and snapshots -+made after Nov. 9, 2006) should be free from both of these problems. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{mips-sgi-irix5}mips-sgi-irix5 -+ -+In order to compile GCC on an SGI running IRIX 5, the @samp{compiler_dev.hdr} -+subsystem must be installed from the IDO CD-ROM supplied by SGI@. -+It is also available for download from -+@uref{ftp://ftp.sgi.com/sgi/IRIX5.3/iris-development-option-5.3.tardist}. -+ -+If you use the MIPS C compiler to bootstrap, it may be necessary -+to increase its table size for switch statements with the -+@option{-Wf,-XNg1500} option. If you use the @option{-O2} -+optimization option, you also need to use @option{-Olimit 3000}. -+ -+To enable debugging under IRIX 5, you must use GNU binutils 2.15 or -+later, and use the @option{--with-gnu-ld} @command{configure} option -+when configuring GCC@. You need to use GNU @command{ar} and @command{nm}, -+also distributed with GNU binutils. -+ -+Some users have reported that @command{/bin/sh} will hang during bootstrap. -+This problem can be avoided by running the commands: -+ -+@smallexample -+ % CONFIG_SHELL=/bin/ksh -+ % export CONFIG_SHELL -+@end smallexample -+ -+before starting the build. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{mips-sgi-irix6}mips-sgi-irix6 -+ -+If you are using SGI's MIPSpro @command{cc} as your bootstrap compiler, you must -+ensure that the N32 ABI is in use. To test this, compile a simple C -+file with @command{cc} and then run @command{file} on the -+resulting object file. The output should look like: -+ -+@smallexample -+test.o: ELF N32 MSB @dots{} -+@end smallexample -+ -+If you see: -+ -+@smallexample -+test.o: ELF 32-bit MSB @dots{} -+@end smallexample -+ -+or -+ -+@smallexample -+test.o: ELF 64-bit MSB @dots{} -+@end smallexample -+ -+then your version of @command{cc} uses the O32 or N64 ABI by default. You -+should set the environment variable @env{CC} to @samp{cc -n32} -+before configuring GCC@. -+ -+If you want the resulting @command{gcc} to run on old 32-bit systems -+with the MIPS R4400 CPU, you need to ensure that only code for the @samp{mips3} -+instruction set architecture (ISA) is generated. While GCC 3.x does -+this correctly, both GCC 2.95 and SGI's MIPSpro @command{cc} may change -+the ISA depending on the machine where GCC is built. Using one of them -+as the bootstrap compiler may result in @samp{mips4} code, which won't run at -+all on @samp{mips3}-only systems. For the test program above, you should see: -+ -+@smallexample -+test.o: ELF N32 MSB mips-3 @dots{} -+@end smallexample -+ -+If you get: -+ -+@smallexample -+test.o: ELF N32 MSB mips-4 @dots{} -+@end smallexample -+ -+instead, you should set the environment variable @env{CC} to @samp{cc -+-n32 -mips3} or @samp{gcc -mips3} respectively before configuring GCC@. -+ -+MIPSpro C 7.4 may cause bootstrap failures, due to a bug when inlining -+@code{memcmp}. Either add @code{-U__INLINE_INTRINSICS} to the @env{CC} -+environment variable as a workaround or upgrade to MIPSpro C 7.4.1m. -+ -+GCC on IRIX 6 is usually built to support the N32, O32 and N64 ABIs. If -+you build GCC on a system that doesn't have the N64 libraries installed -+or cannot run 64-bit binaries, -+you need to configure with @option{--disable-multilib} so GCC doesn't -+try to use them. This will disable building the O32 libraries, too. -+Look for @file{/usr/lib64/libc.so.1} to see if you -+have the 64-bit libraries installed. -+ -+To enable debugging for the O32 ABI, you must use GNU @command{as} from -+GNU binutils 2.15 or later. You may also use GNU @command{ld}, but -+this is not required and currently causes some problems with Ada. -+ -+The @option{--enable-libgcj} -+option is disabled by default: IRIX 6 uses a very low default limit -+(20480) for the command line length. Although @command{libtool} contains a -+workaround for this problem, at least the N64 @samp{libgcj} is known not -+to build despite this, running into an internal error of the native -+@command{ld}. A sure fix is to increase this limit (@samp{ncargs}) to -+its maximum of 262144 bytes. If you have root access, you can use the -+@command{systune} command to do this. -+ -+@code{wchar_t} support in @samp{libstdc++} is not available for old -+IRIX 6.5.x releases, @math{x < 19}. The problem cannot be autodetected -+and in order to build GCC for such targets you need to configure with -+@option{--disable-wchar_t}. -+ -+See @uref{http://freeware.sgi.com/} for more -+information about using GCC on IRIX platforms. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-x}powerpc-*-* -+ -+You can specify a default version for the @option{-mcpu=@var{cpu_type}} -+switch by using the configure option @option{--with-cpu-@var{cpu_type}}. -+ -+You will need -+@uref{ftp://ftp.kernel.org/pub/linux/devel/binutils,,binutils 2.15} -+or newer for a working GCC@. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-darwin}powerpc-*-darwin* -+PowerPC running Darwin (Mac OS X kernel). -+ -+Pre-installed versions of Mac OS X may not include any developer tools, -+meaning that you will not be able to build GCC from source. Tool -+binaries are available at -+@uref{http://developer.apple.com/darwin/projects/compiler/} (free -+registration required). -+ -+This version of GCC requires at least cctools-590.36. The -+cctools-590.36 package referenced from -+@uref{http://gcc.gnu.org/ml/gcc/2006-03/msg00507.html} will not work -+on systems older than 10.3.9 (aka darwin7.9.0). -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-elf}powerpc-*-elf -+PowerPC system in big endian mode, running System V.4. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-linux-gnu}powerpc*-*-linux-gnu* -+ -+PowerPC system in big endian mode running Linux. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-netbsd}powerpc-*-netbsd* -+PowerPC system in big endian mode running NetBSD@. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-eabisim}powerpc-*-eabisim -+Embedded PowerPC system in big endian mode for use in running under the -+PSIM simulator. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpc-x-eabi}powerpc-*-eabi -+Embedded PowerPC system in big endian mode. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpcle-x-elf}powerpcle-*-elf -+PowerPC system in little endian mode, running System V.4. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpcle-x-eabisim}powerpcle-*-eabisim -+Embedded PowerPC system in little endian mode for use in running under -+the PSIM simulator. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{powerpcle-x-eabi}powerpcle-*-eabi -+Embedded PowerPC system in little endian mode. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{s390-x-linux}s390-*-linux* -+S/390 system running GNU/Linux for S/390@. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{s390x-x-linux}s390x-*-linux* -+zSeries system (64-bit) running GNU/Linux for zSeries@. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{s390x-ibm-tpf}s390x-ibm-tpf* -+zSeries system (64-bit) running TPF@. This platform is -+supported as cross-compilation target only. -+ -+@html -+<hr /> -+@end html -+@c Please use Solaris 2 to refer to all release of Solaris, starting -+@c with 2.0 until 2.6, 7, 8, etc. Solaris 1 was a marketing name for -+@c SunOS 4 releases which we don't use to avoid confusion. Solaris -+@c alone is too unspecific and must be avoided. -+@heading @anchor{x-x-solaris2}*-*-solaris2* -+ -+Sun does not ship a C compiler with Solaris 2. To bootstrap and install -+GCC you first have to install a pre-built compiler, see the -+@uref{binaries.html,,binaries page} for details. -+ -+The Solaris 2 @command{/bin/sh} will often fail to configure -+@file{libstdc++-v3}, @file{boehm-gc} or @file{libjava}. We therefore -+recommend using the following initial sequence of commands -+ -+@smallexample -+ % CONFIG_SHELL=/bin/ksh -+ % export CONFIG_SHELL -+@end smallexample -+ -+and proceed as described in @uref{configure.html,,the configure instructions}. -+In addition we strongly recommend specifying an absolute path to invoke -+@var{srcdir}/configure. -+ -+Solaris 2 comes with a number of optional OS packages. Some of these -+are needed to use GCC fully, namely @code{SUNWarc}, -+@code{SUNWbtool}, @code{SUNWesu}, @code{SUNWhea}, @code{SUNWlibm}, -+@code{SUNWsprot}, and @code{SUNWtoo}. If you did not install all -+optional packages when installing Solaris 2, you will need to verify that -+the packages that GCC needs are installed. -+ -+To check whether an optional package is installed, use -+the @command{pkginfo} command. To add an optional package, use the -+@command{pkgadd} command. For further details, see the Solaris 2 -+documentation. -+ -+Trying to use the linker and other tools in -+@file{/usr/ucb} to install GCC has been observed to cause trouble. -+For example, the linker may hang indefinitely. The fix is to remove -+@file{/usr/ucb} from your @env{PATH}. -+ -+The build process works more smoothly with the legacy Sun tools so, if you -+have @file{/usr/xpg4/bin} in your @env{PATH}, we recommend that you place -+@file{/usr/bin} before @file{/usr/xpg4/bin} for the duration of the build. -+ -+We recommend the use of GNU binutils 2.14 or later, or the vendor tools -+(Sun @command{as}, Sun @command{ld}). Note that your mileage may vary -+if you use a combination of the GNU tools and the Sun tools: while the -+combination GNU @command{as} + Sun @command{ld} should reasonably work, -+the reverse combination Sun @command{as} + GNU @command{ld} is known to -+cause memory corruption at runtime in some cases for C++ programs. -+ -+The stock GNU binutils 2.15 release is broken on this platform because of a -+single bug. It has been fixed on the 2.15 branch in the CVS repository. -+You can obtain a working version by checking out the binutils-2_15-branch -+from the CVS repository or applying the patch -+@uref{http://sourceware.org/ml/binutils-cvs/2004-09/msg00036.html} to the -+release. -+ -+We recommend the use of GNU binutils 2.16 or later in conjunction with GCC -+4.x, or the vendor tools (Sun @command{as}, Sun @command{ld}). However, -+for Solaris 10 and above, an additional patch is required in order for the -+GNU linker to be able to cope with a new flavor of shared libraries. You -+can obtain a working version by checking out the binutils-2_16-branch from -+the CVS repository or applying the patch -+@uref{http://sourceware.org/ml/binutils-cvs/2005-07/msg00122.html} to the -+release. -+ -+Sun bug 4296832 turns up when compiling X11 headers with GCC 2.95 or -+newer: @command{g++} will complain that types are missing. These headers -+assume that omitting the type means @code{int}; this assumption worked for -+C89 but is wrong for C++, and is now wrong for C99 also. -+ -+@command{g++} accepts such (invalid) constructs with the option -+@option{-fpermissive}; it will assume that any missing type is @code{int} -+(as defined by C89). -+ -+There are patches for Solaris 7 (108376-21 or newer for SPARC, -+108377-20 for Intel), and Solaris 8 (108652-24 or newer for SPARC, -+108653-22 for Intel) that fix this bug. -+ -+Sun bug 4927647 sometimes causes random spurious testsuite failures -+related to missing diagnostic output. This bug doesn't affect GCC -+itself, rather it is a kernel bug triggered by the @command{expect} -+program which is used only by the GCC testsuite driver. When the bug -+causes the @command{expect} program to miss anticipated output, extra -+testsuite failures appear. -+ -+There are patches for Solaris 8 (117350-12 or newer for SPARC, -+117351-12 or newer for Intel) and Solaris 9 (117171-11 or newer for -+SPARC, 117172-11 or newer for Intel) that address this problem. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{sparc-sun-solaris2}sparc-sun-solaris2* -+ -+When GCC is configured to use binutils 2.14 or later the binaries -+produced are smaller than the ones produced using Sun's native tools; -+this difference is quite significant for binaries containing debugging -+information. -+ -+Starting with Solaris 7, the operating system is capable of executing -+64-bit SPARC V9 binaries. GCC 3.1 and later properly supports -+this; the @option{-m64} option enables 64-bit code generation. -+However, if all you want is code tuned for the UltraSPARC CPU, you -+should try the @option{-mtune=ultrasparc} option instead, which produces -+code that, unlike full 64-bit code, can still run on non-UltraSPARC -+machines. -+ -+When configuring on a Solaris 7 or later system that is running a kernel -+that supports only 32-bit binaries, one must configure with -+@option{--disable-multilib}, since we will not be able to build the -+64-bit target libraries. -+ -+GCC 3.3 and GCC 3.4 trigger code generation bugs in earlier versions of -+the GNU compiler (especially GCC 3.0.x versions), which lead to the -+miscompilation of the stage1 compiler and the subsequent failure of the -+bootstrap process. A workaround is to use GCC 3.2.3 as an intermediary -+stage, i.e.@: to bootstrap that compiler with the base compiler and then -+use it to bootstrap the final compiler. -+ -+GCC 3.4 triggers a code generation bug in versions 5.4 (Sun ONE Studio 7) -+and 5.5 (Sun ONE Studio 8) of the Sun compiler, which causes a bootstrap -+failure in form of a miscompilation of the stage1 compiler by the Sun -+compiler. This is Sun bug 4974440. This is fixed with patch 112760-07. -+ -+GCC 3.4 changed the default debugging format from STABS to DWARF-2 for -+32-bit code on Solaris 7 and later. If you use the Sun assembler, this -+change apparently runs afoul of Sun bug 4910101 (which is referenced as -+a x86-only problem by Sun, probably because they do not use DWARF-2). -+A symptom of the problem is that you cannot compile C++ programs like -+@command{groff} 1.19.1 without getting messages similar to the following: -+ -+@smallexample -+ld: warning: relocation error: R_SPARC_UA32: @dots{} -+ external symbolic relocation against non-allocatable section -+ .debug_info cannot be processed at runtime: relocation ignored. -+@end smallexample -+ -+To work around this problem, compile with @option{-gstabs+} instead of -+plain @option{-g}. -+ -+When configuring the GNU Multiple Precision Library (GMP) or the MPFR -+library on a Solaris 7 or later system, the canonical target triplet -+must be specified as the @command{build} parameter on the configure -+line. This triplet can be obtained by invoking ./config.guess in -+the toplevel source directory of GCC (and not that of GMP or MPFR). -+For example on a Solaris 7 system: -+ -+@smallexample -+ % ./configure --build=sparc-sun-solaris2.7 --prefix=xxx -+@end smallexample -+ -+@html -+<hr /> -+@end html -+@heading @anchor{sparc-sun-solaris27}sparc-sun-solaris2.7 -+ -+Sun patch 107058-01 (1999-01-13) for Solaris 7/SPARC triggers a bug in -+the dynamic linker. This problem (Sun bug 4210064) affects GCC 2.8 -+and later, including all EGCS releases. Sun formerly recommended -+107058-01 for all Solaris 7 users, but around 1999-09-01 it started to -+recommend it only for people who use Sun's compilers. -+ -+Here are some workarounds to this problem: -+@itemize @bullet -+@item -+Do not install Sun patch 107058-01 until after Sun releases a -+complete patch for bug 4210064. This is the simplest course to take, -+unless you must also use Sun's C compiler. Unfortunately 107058-01 -+is preinstalled on some new Solaris 7-based hosts, so you may have to -+back it out. -+ -+@item -+Copy the original, unpatched Solaris 7 -+@command{/usr/ccs/bin/as} into -+@command{/usr/local/libexec/gcc/sparc-sun-solaris2.7/3.4/as}, -+adjusting the latter name to fit your local conventions and software -+version numbers. -+ -+@item -+Install Sun patch 106950-03 (1999-05-25) or later. Nobody with -+both 107058-01 and 106950-03 installed has reported the bug with GCC -+and Sun's dynamic linker. This last course of action is riskiest, -+for two reasons. First, you must install 106950 on all hosts that -+run code generated by GCC; it doesn't suffice to install it only on -+the hosts that run GCC itself. Second, Sun says that 106950-03 is -+only a partial fix for bug 4210064, but Sun doesn't know whether the -+partial fix is adequate for GCC@. Revision -08 or later should fix -+the bug. The current (as of 2004-05-23) revision is -24, and is included in -+the Solaris 7 Recommended Patch Cluster. -+@end itemize -+ -+GCC 3.3 triggers a bug in version 5.0 Alpha 03/27/98 of the Sun assembler, -+which causes a bootstrap failure when linking the 64-bit shared version of -+libgcc. A typical error message is: -+ -+@smallexample -+ld: fatal: relocation error: R_SPARC_32: file libgcc/sparcv9/_muldi3.o: -+ symbol <unknown>: offset 0xffffffff7ec133e7 is non-aligned. -+@end smallexample -+ -+This bug has been fixed in the final 5.0 version of the assembler. -+ -+A similar problem was reported for version Sun WorkShop 6 99/08/18 of the -+Sun assembler, which causes a bootstrap failure with GCC 4.0.0: -+ -+@smallexample -+ld: fatal: relocation error: R_SPARC_DISP32: -+ file .libs/libstdc++.lax/libsupc++convenience.a/vterminate.o: -+ symbol <unknown>: offset 0xfccd33ad is non-aligned -+@end smallexample -+ -+This bug has been fixed in more recent revisions of the assembler. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{sparc-x-linux}sparc-*-linux* -+ -+GCC versions 3.0 and higher require binutils 2.11.2 and glibc 2.2.4 -+or newer on this platform. All earlier binutils and glibc -+releases mishandled unaligned relocations on @code{sparc-*-*} targets. -+ -+ -+@html -+<hr /> -+@end html -+@heading @anchor{sparc64-x-solaris2}sparc64-*-solaris2* -+ -+When configuring the GNU Multiple Precision Library (GMP) or the -+MPFR library, the canonical target triplet must be specified as -+the @command{build} parameter on the configure line. For example -+on a Solaris 7 system: -+ -+@smallexample -+ % ./configure --build=sparc64-sun-solaris2.7 --prefix=xxx -+@end smallexample -+ -+The following compiler flags must be specified in the configure -+step in order to bootstrap this target with the Sun compiler: -+ -+@smallexample -+ % CC="cc -xarch=v9 -xildoff" @var{srcdir}/configure [@var{options}] [@var{target}] -+@end smallexample -+ -+@option{-xarch=v9} specifies the SPARC-V9 architecture to the Sun toolchain -+and @option{-xildoff} turns off the incremental linker. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{sparcv9-x-solaris2}sparcv9-*-solaris2* -+ -+This is a synonym for sparc64-*-solaris2*. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-vxworks}*-*-vxworks* -+Support for VxWorks is in flux. At present GCC supports @emph{only} the -+very recent VxWorks 5.5 (aka Tornado 2.2) release, and only on PowerPC@. -+We welcome patches for other architectures supported by VxWorks 5.5. -+Support for VxWorks AE would also be welcome; we believe this is merely -+a matter of writing an appropriate ``configlette'' (see below). We are -+not interested in supporting older, a.out or COFF-based, versions of -+VxWorks in GCC 3. -+ -+VxWorks comes with an older version of GCC installed in -+@file{@var{$WIND_BASE}/host}; we recommend you do not overwrite it. -+Choose an installation @var{prefix} entirely outside @var{$WIND_BASE}. -+Before running @command{configure}, create the directories @file{@var{prefix}} -+and @file{@var{prefix}/bin}. Link or copy the appropriate assembler, -+linker, etc.@: into @file{@var{prefix}/bin}, and set your @var{PATH} to -+include that directory while running both @command{configure} and -+@command{make}. -+ -+You must give @command{configure} the -+@option{--with-headers=@var{$WIND_BASE}/target/h} switch so that it can -+find the VxWorks system headers. Since VxWorks is a cross compilation -+target only, you must also specify @option{--target=@var{target}}. -+@command{configure} will attempt to create the directory -+@file{@var{prefix}/@var{target}/sys-include} and copy files into it; -+make sure the user running @command{configure} has sufficient privilege -+to do so. -+ -+GCC's exception handling runtime requires a special ``configlette'' -+module, @file{contrib/gthr_supp_vxw_5x.c}. Follow the instructions in -+that file to add the module to your kernel build. (Future versions of -+VxWorks will incorporate this module.) -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x86-64-x-x}x86_64-*-*, amd64-*-* -+ -+GCC supports the x86-64 architecture implemented by the AMD64 processor -+(amd64-*-* is an alias for x86_64-*-*) on GNU/Linux, FreeBSD and NetBSD@. -+On GNU/Linux the default is a bi-arch compiler which is able to generate -+both 64-bit x86-64 and 32-bit x86 code (via the @option{-m32} switch). -+ -+@html -+<hr /> -+@end html -+@heading @anchor{xtensa-x-elf}xtensa*-*-elf -+ -+This target is intended for embedded Xtensa systems using the -+@samp{newlib} C library. It uses ELF but does not support shared -+objects. Designed-defined instructions specified via the -+Tensilica Instruction Extension (TIE) language are only supported -+through inline assembly. -+ -+The Xtensa configuration information must be specified prior to -+building GCC@. The @file{include/xtensa-config.h} header -+file contains the configuration information. If you created your -+own Xtensa configuration with the Xtensa Processor Generator, the -+downloaded files include a customized copy of this header file, -+which you can use to replace the default header file. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{xtensa-x-linux}xtensa*-*-linux* -+ -+This target is for Xtensa systems running GNU/Linux. It supports ELF -+shared objects and the GNU C library (glibc). It also generates -+position-independent code (PIC) regardless of whether the -+@option{-fpic} or @option{-fPIC} options are used. In other -+respects, this target is the same as the -+@uref{#xtensa*-*-elf,,@samp{xtensa*-*-elf}} target. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{windows}Microsoft Windows -+ -+@subheading Intel 16-bit versions -+The 16-bit versions of Microsoft Windows, such as Windows 3.1, are not -+supported. -+ -+However, the 32-bit port has limited support for Microsoft -+Windows 3.11 in the Win32s environment, as a target only. See below. -+ -+@subheading Intel 32-bit versions -+ -+The 32-bit versions of Windows, including Windows 95, Windows NT, Windows -+XP, and Windows Vista, are supported by several different target -+platforms. These targets differ in which Windows subsystem they target -+and which C libraries are used. -+ -+@itemize -+@item Cygwin @uref{#x-x-cygwin,,*-*-cygwin}: Cygwin provides a user-space -+Linux API emulation layer in the Win32 subsystem. -+@item Interix @uref{#x-x-interix,,*-*-interix}: The Interix subsystem -+provides native support for POSIX. -+@item MinGW @uref{#x-x-mingw,,*-*-mingw}: MinGW is a native GCC port for -+the Win32 subsystem that provides a subset of POSIX. -+@item MKS i386-pc-mks: NuTCracker from MKS. See -+@uref{http://www.mkssoftware.com/} for more information. -+@end itemize -+ -+@subheading Intel 64-bit versions -+ -+GCC contains support for x86-64 using the mingw-w64 -+runtime library, available from @uref{http://mingw-w64.sourceforge.net/}. -+This library should be used with the target triple x86_64-pc-mingw32. -+ -+Presently Windows for Itanium is not supported. -+ -+@subheading Windows CE -+ -+Windows CE is supported as a target only on ARM (arm-wince-pe), Hitachi -+SuperH (sh-wince-pe), and MIPS (mips-wince-pe). -+ -+@subheading Other Windows Platforms -+ -+GCC no longer supports Windows NT on the Alpha or PowerPC. -+ -+GCC no longer supports the Windows POSIX subsystem. However, it does -+support the Interix subsystem. See above. -+ -+Old target names including *-*-winnt and *-*-windowsnt are no longer used. -+ -+PW32 (i386-pc-pw32) support was never completed, and the project seems to -+be inactive. See @uref{http://pw32.sourceforge.net/} for more information. -+ -+UWIN support has been removed due to a lack of maintenance. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-cygwin}*-*-cygwin -+ -+Ports of GCC are included with the -+@uref{http://www.cygwin.com/,,Cygwin environment}. -+ -+GCC will build under Cygwin without modification; it does not build -+with Microsoft's C++ compiler and there are no plans to make it do so. -+ -+Cygwin can be compiled with i?86-pc-cygwin. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-interix}*-*-interix -+ -+The Interix target is used by OpenNT, Interix, Services For UNIX (SFU), -+and Subsystem for UNIX-based Applications (SUA). Applications compiled -+with this target run in the Interix subsystem, which is separate from -+the Win32 subsystem. This target was last known to work in GCC 3.3. -+ -+For more information, see @uref{http://www.interix.com/}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{x-x-mingw32}*-*-mingw32 -+ -+GCC will build with and support only MinGW runtime 3.12 and later. -+Earlier versions of headers are incompatible with the new default semantics -+of @code{extern inline} in @code{-std=c99} and @code{-std=gnu99} modes. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{os2}OS/2 -+ -+GCC does not currently support OS/2. However, Andrew Zabolotny has been -+working on a generic OS/2 port with pgcc. The current code can be found -+at @uref{http://www.goof.com/pcg/os2/,,http://www.goof.com/pcg/os2/}. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{older}Older systems -+ -+GCC contains support files for many older (1980s and early -+1990s) Unix variants. For the most part, support for these systems -+has not been deliberately removed, but it has not been maintained for -+several years and may suffer from bitrot. -+ -+Starting with GCC 3.1, each release has a list of ``obsoleted'' systems. -+Support for these systems is still present in that release, but -+@command{configure} will fail unless the @option{--enable-obsolete} -+option is given. Unless a maintainer steps forward, support for these -+systems will be removed from the next release of GCC@. -+ -+Support for old systems as hosts for GCC can cause problems if the -+workarounds for compiler, library and operating system bugs affect the -+cleanliness or maintainability of the rest of GCC@. In some cases, to -+bring GCC up on such a system, if still possible with current GCC, may -+require first installing an old version of GCC which did work on that -+system, and using it to compile a more recent GCC, to avoid bugs in the -+vendor compiler. Old releases of GCC 1 and GCC 2 are available in the -+@file{old-releases} directory on the @uref{../mirrors.html,,GCC mirror -+sites}. Header bugs may generally be avoided using -+@command{fixincludes}, but bugs or deficiencies in libraries and the -+operating system may still cause problems. -+ -+Support for older systems as targets for cross-compilation is less -+problematic than support for them as hosts for GCC; if an enthusiast -+wishes to make such a target work again (including resurrecting any of -+the targets that never worked with GCC 2, starting from the last -+version before they were removed), patches -+@uref{../contribute.html,,following the usual requirements} would be -+likely to be accepted, since they should not affect the support for more -+modern targets. -+ -+For some systems, old versions of GNU binutils may also be useful, -+and are available from @file{pub/binutils/old-releases} on -+@uref{http://sourceware.org/mirrors.html,,sourceware.org mirror sites}. -+ -+Some of the information on specific systems above relates to -+such older systems, but much of the information -+about GCC on such systems (which may no longer be applicable to -+current GCC) is to be found in the GCC texinfo manual. -+ -+@html -+<hr /> -+@end html -+@heading @anchor{elf}all ELF targets (SVR4, Solaris 2, etc.) -+ -+C++ support is significantly better on ELF targets if you use the -+@uref{./configure.html#with-gnu-ld,,GNU linker}; duplicate copies of -+inlines, vtables and template instantiations will be discarded -+automatically. -+ -+ -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***Old documentation****************************************************** -+@ifset oldhtml -+@include install-old.texi -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c ***GFDL******************************************************************** -+@ifset gfdlhtml -+@include fdl.texi -+@html -+<hr /> -+<p> -+@end html -+@ifhtml -+@uref{./index.html,,Return to the GCC Installation page} -+@end ifhtml -+@end ifset -+ -+@c *************************************************************************** -+@c Part 6 The End of the Document -+@ifinfo -+@comment node-name, next, previous, up -+@node Concept Index, , GNU Free Documentation License, Top -+@end ifinfo -+ -+@ifinfo -+@unnumbered Concept Index -+ -+@printindex cp -+ -+@contents -+@end ifinfo -+@bye -diff -Naur gcc-4.4.2.orig/gcc/doc/invoke.texi gcc-4.4.2-rtems4.10-20091015/gcc/doc/invoke.texi +diff -Naur gcc-4.4.2.orig/gcc/doc/invoke.texi gcc-4.4.2/gcc/doc/invoke.texi --- gcc-4.4.2.orig/gcc/doc/invoke.texi 2009-09-18 23:53:23.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/doc/invoke.texi 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/gcc/doc/invoke.texi 2009-10-15 18:36:00.000000000 +0200 @@ -606,6 +606,10 @@ -mno-sched-prefer-non-control-spec-insns @gol -mno-sched-count-spec-in-critical-path} @@ -11743,16662 +4228,9 @@ diff -Naur gcc-4.4.2.orig/gcc/doc/invoke.texi gcc-4.4.2-rtems4.10-20091015/gcc/d @node M32R/D Options @subsection M32R/D Options @cindex M32R/D options -diff -Naur gcc-4.4.2.orig/gcc/doc/invoke.texi.orig gcc-4.4.2-rtems4.10-20091015/gcc/doc/invoke.texi.orig ---- gcc-4.4.2.orig/gcc/doc/invoke.texi.orig 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/gcc/doc/invoke.texi.orig 2009-10-15 18:36:00.000000000 +0200 -@@ -0,0 +1,16649 @@ -+@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -+@c 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 -+@c Free Software Foundation, Inc. -+@c This is part of the GCC manual. -+@c For copying conditions, see the file gcc.texi. -+ -+@ignore -+@c man begin INCLUDE -+@include gcc-vers.texi -+@c man end -+ -+@c man begin COPYRIGHT -+Copyright @copyright{} 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, -+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 -+Free Software Foundation, Inc. -+ -+Permission is granted to copy, distribute and/or modify this document -+under the terms of the GNU Free Documentation License, Version 1.2 or -+any later version published by the Free Software Foundation; with the -+Invariant Sections being ``GNU General Public License'' and ``Funding -+Free Software'', the Front-Cover texts being (a) (see below), and with -+the Back-Cover Texts being (b) (see below). A copy of the license is -+included in the gfdl(7) man page. -+ -+(a) The FSF's Front-Cover Text is: -+ -+ A GNU Manual -+ -+(b) The FSF's Back-Cover Text is: -+ -+ You have freedom to copy and modify this GNU Manual, like GNU -+ software. Copies published by the Free Software Foundation raise -+ funds for GNU development. -+@c man end -+@c Set file name and title for the man page. -+@setfilename gcc -+@settitle GNU project C and C++ compiler -+@c man begin SYNOPSIS -+gcc [@option{-c}|@option{-S}|@option{-E}] [@option{-std=}@var{standard}] -+ [@option{-g}] [@option{-pg}] [@option{-O}@var{level}] -+ [@option{-W}@var{warn}@dots{}] [@option{-pedantic}] -+ [@option{-I}@var{dir}@dots{}] [@option{-L}@var{dir}@dots{}] -+ [@option{-D}@var{macro}[=@var{defn}]@dots{}] [@option{-U}@var{macro}] -+ [@option{-f}@var{option}@dots{}] [@option{-m}@var{machine-option}@dots{}] -+ [@option{-o} @var{outfile}] [@@@var{file}] @var{infile}@dots{} -+ -+Only the most useful options are listed here; see below for the -+remainder. @samp{g++} accepts mostly the same options as @samp{gcc}. -+@c man end -+@c man begin SEEALSO -+gpl(7), gfdl(7), fsf-funding(7), -+cpp(1), gcov(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1) -+and the Info entries for @file{gcc}, @file{cpp}, @file{as}, -+@file{ld}, @file{binutils} and @file{gdb}. -+@c man end -+@c man begin BUGS -+For instructions on reporting bugs, see -+@w{@value{BUGURL}}. -+@c man end -+@c man begin AUTHOR -+See the Info entry for @command{gcc}, or -+@w{@uref{http://gcc.gnu.org/onlinedocs/gcc/Contributors.html}}, -+for contributors to GCC@. -+@c man end -+@end ignore -+ -+@node Invoking GCC -+@chapter GCC Command Options -+@cindex GCC command options -+@cindex command options -+@cindex options, GCC command -+ -+@c man begin DESCRIPTION -+When you invoke GCC, it normally does preprocessing, compilation, -+assembly and linking. The ``overall options'' allow you to stop this -+process at an intermediate stage. For example, the @option{-c} option -+says not to run the linker. Then the output consists of object files -+output by the assembler. -+ -+Other options are passed on to one stage of processing. Some options -+control the preprocessor and others the compiler itself. Yet other -+options control the assembler and linker; most of these are not -+documented here, since you rarely need to use any of them. -+ -+@cindex C compilation options -+Most of the command line options that you can use with GCC are useful -+for C programs; when an option is only useful with another language -+(usually C++), the explanation says so explicitly. If the description -+for a particular option does not mention a source language, you can use -+that option with all supported languages. -+ -+@cindex C++ compilation options -+@xref{Invoking G++,,Compiling C++ Programs}, for a summary of special -+options for compiling C++ programs. -+ -+@cindex grouping options -+@cindex options, grouping -+The @command{gcc} program accepts options and file names as operands. Many -+options have multi-letter names; therefore multiple single-letter options -+may @emph{not} be grouped: @option{-dv} is very different from @w{@samp{-d -+-v}}. -+ -+@cindex order of options -+@cindex options, order -+You can mix options and other arguments. For the most part, the order -+you use doesn't matter. Order does matter when you use several -+options of the same kind; for example, if you specify @option{-L} more -+than once, the directories are searched in the order specified. Also, -+the placement of the @option{-l} option is significant. -+ -+Many options have long names starting with @samp{-f} or with -+@samp{-W}---for example, -+@option{-fmove-loop-invariants}, @option{-Wformat} and so on. Most of -+these have both positive and negative forms; the negative form of -+@option{-ffoo} would be @option{-fno-foo}. This manual documents -+only one of these two forms, whichever one is not the default. -+ -+@c man end -+ -+@xref{Option Index}, for an index to GCC's options. -+ -+@menu -+* Option Summary:: Brief list of all options, without explanations. -+* Overall Options:: Controlling the kind of output: -+ an executable, object files, assembler files, -+ or preprocessed source. -+* Invoking G++:: Compiling C++ programs. -+* C Dialect Options:: Controlling the variant of C language compiled. -+* C++ Dialect Options:: Variations on C++. -+* Objective-C and Objective-C++ Dialect Options:: Variations on Objective-C -+ and Objective-C++. -+* Language Independent Options:: Controlling how diagnostics should be -+ formatted. -+* Warning Options:: How picky should the compiler be? -+* Debugging Options:: Symbol tables, measurements, and debugging dumps. -+* Optimize Options:: How much optimization? -+* Preprocessor Options:: Controlling header files and macro definitions. -+ Also, getting dependency information for Make. -+* Assembler Options:: Passing options to the assembler. -+* Link Options:: Specifying libraries and so on. -+* Directory Options:: Where to find header files and libraries. -+ Where to find the compiler executable files. -+* Spec Files:: How to pass switches to sub-processes. -+* Target Options:: Running a cross-compiler, or an old version of GCC. -+* Submodel Options:: Specifying minor hardware or convention variations, -+ such as 68010 vs 68020. -+* Code Gen Options:: Specifying conventions for function calls, data layout -+ and register usage. -+* Environment Variables:: Env vars that affect GCC. -+* Precompiled Headers:: Compiling a header once, and using it many times. -+* Running Protoize:: Automatically adding or removing function prototypes. -+@end menu -+ -+@c man begin OPTIONS -+ -+@node Option Summary -+@section Option Summary -+ -+Here is a summary of all the options, grouped by type. Explanations are -+in the following sections. -+ -+@table @emph -+@item Overall Options -+@xref{Overall Options,,Options Controlling the Kind of Output}. -+@gccoptlist{-c -S -E -o @var{file} -combine -pipe -pass-exit-codes @gol -+-x @var{language} -v -### --help@r{[}=@var{class}@r{[},@dots{}@r{]]} --target-help @gol -+--version -wrapper@@@var{file}} -+ -+@item C Language Options -+@xref{C Dialect Options,,Options Controlling C Dialect}. -+@gccoptlist{-ansi -std=@var{standard} -fgnu89-inline @gol -+-aux-info @var{filename} @gol -+-fno-asm -fno-builtin -fno-builtin-@var{function} @gol -+-fhosted -ffreestanding -fopenmp -fms-extensions @gol -+-trigraphs -no-integrated-cpp -traditional -traditional-cpp @gol -+-fallow-single-precision -fcond-mismatch -flax-vector-conversions @gol -+-fsigned-bitfields -fsigned-char @gol -+-funsigned-bitfields -funsigned-char} -+ -+@item C++ Language Options -+@xref{C++ Dialect Options,,Options Controlling C++ Dialect}. -+@gccoptlist{-fabi-version=@var{n} -fno-access-control -fcheck-new @gol -+-fconserve-space -ffriend-injection @gol -+-fno-elide-constructors @gol -+-fno-enforce-eh-specs @gol -+-ffor-scope -fno-for-scope -fno-gnu-keywords @gol -+-fno-implicit-templates @gol -+-fno-implicit-inline-templates @gol -+-fno-implement-inlines -fms-extensions @gol -+-fno-nonansi-builtins -fno-operator-names @gol -+-fno-optional-diags -fpermissive @gol -+-frepo -fno-rtti -fstats -ftemplate-depth-@var{n} @gol -+-fno-threadsafe-statics -fuse-cxa-atexit -fno-weak -nostdinc++ @gol -+-fno-default-inline -fvisibility-inlines-hidden @gol -+-fvisibility-ms-compat @gol -+-Wabi -Wctor-dtor-privacy @gol -+-Wnon-virtual-dtor -Wreorder @gol -+-Weffc++ -Wstrict-null-sentinel @gol -+-Wno-non-template-friend -Wold-style-cast @gol -+-Woverloaded-virtual -Wno-pmf-conversions @gol -+-Wsign-promo} -+ -+@item Objective-C and Objective-C++ Language Options -+@xref{Objective-C and Objective-C++ Dialect Options,,Options Controlling -+Objective-C and Objective-C++ Dialects}. -+@gccoptlist{-fconstant-string-class=@var{class-name} @gol -+-fgnu-runtime -fnext-runtime @gol -+-fno-nil-receivers @gol -+-fobjc-call-cxx-cdtors @gol -+-fobjc-direct-dispatch @gol -+-fobjc-exceptions @gol -+-fobjc-gc @gol -+-freplace-objc-classes @gol -+-fzero-link @gol -+-gen-decls @gol -+-Wassign-intercept @gol -+-Wno-protocol -Wselector @gol -+-Wstrict-selector-match @gol -+-Wundeclared-selector} -+ -+@item Language Independent Options -+@xref{Language Independent Options,,Options to Control Diagnostic Messages Formatting}. -+@gccoptlist{-fmessage-length=@var{n} @gol -+-fdiagnostics-show-location=@r{[}once@r{|}every-line@r{]} @gol -+-fdiagnostics-show-option} -+ -+@item Warning Options -+@xref{Warning Options,,Options to Request or Suppress Warnings}. -+@gccoptlist{-fsyntax-only -pedantic -pedantic-errors @gol -+-w -Wextra -Wall -Waddress -Waggregate-return -Warray-bounds @gol -+-Wno-attributes -Wno-builtin-macro-redefined @gol -+-Wc++-compat -Wc++0x-compat -Wcast-align -Wcast-qual @gol -+-Wchar-subscripts -Wclobbered -Wcomment @gol -+-Wconversion -Wcoverage-mismatch -Wno-deprecated @gol -+-Wno-deprecated-declarations -Wdisabled-optimization @gol -+-Wno-div-by-zero -Wempty-body -Wenum-compare -Wno-endif-labels @gol -+-Werror -Werror=* @gol -+-Wfatal-errors -Wfloat-equal -Wformat -Wformat=2 @gol -+-Wno-format-contains-nul -Wno-format-extra-args -Wformat-nonliteral @gol -+-Wformat-security -Wformat-y2k @gol -+-Wframe-larger-than=@var{len} -Wignored-qualifiers @gol -+-Wimplicit -Wimplicit-function-declaration -Wimplicit-int @gol -+-Winit-self -Winline @gol -+-Wno-int-to-pointer-cast -Wno-invalid-offsetof @gol -+-Winvalid-pch -Wlarger-than=@var{len} -Wunsafe-loop-optimizations @gol -+-Wlogical-op -Wlong-long @gol -+-Wmain -Wmissing-braces -Wmissing-field-initializers @gol -+-Wmissing-format-attribute -Wmissing-include-dirs @gol -+-Wmissing-noreturn -Wno-mudflap @gol -+-Wno-multichar -Wnonnull -Wno-overflow @gol -+-Woverlength-strings -Wpacked -Wpacked-bitfield-compat -Wpadded @gol -+-Wparentheses -Wpedantic-ms-format -Wno-pedantic-ms-format @gol -+-Wpointer-arith -Wno-pointer-to-int-cast @gol -+-Wredundant-decls @gol -+-Wreturn-type -Wsequence-point -Wshadow @gol -+-Wsign-compare -Wsign-conversion -Wstack-protector @gol -+-Wstrict-aliasing -Wstrict-aliasing=n @gol -+-Wstrict-overflow -Wstrict-overflow=@var{n} @gol -+-Wswitch -Wswitch-default -Wswitch-enum -Wsync-nand @gol -+-Wsystem-headers -Wtrigraphs -Wtype-limits -Wundef -Wuninitialized @gol -+-Wunknown-pragmas -Wno-pragmas -Wunreachable-code @gol -+-Wunused -Wunused-function -Wunused-label -Wunused-parameter @gol -+-Wunused-value -Wunused-variable @gol -+-Wvariadic-macros -Wvla @gol -+-Wvolatile-register-var -Wwrite-strings} -+ -+@item C and Objective-C-only Warning Options -+@gccoptlist{-Wbad-function-cast -Wmissing-declarations @gol -+-Wmissing-parameter-type -Wmissing-prototypes -Wnested-externs @gol -+-Wold-style-declaration -Wold-style-definition @gol -+-Wstrict-prototypes -Wtraditional -Wtraditional-conversion @gol -+-Wdeclaration-after-statement -Wpointer-sign} -+ -+@item Debugging Options -+@xref{Debugging Options,,Options for Debugging Your Program or GCC}. -+@gccoptlist{-d@var{letters} -dumpspecs -dumpmachine -dumpversion @gol -+-fdbg-cnt-list -fdbg-cnt=@var{counter-value-list} @gol -+-fdump-noaddr -fdump-unnumbered @gol -+-fdump-translation-unit@r{[}-@var{n}@r{]} @gol -+-fdump-class-hierarchy@r{[}-@var{n}@r{]} @gol -+-fdump-ipa-all -fdump-ipa-cgraph -fdump-ipa-inline @gol -+-fdump-statistics @gol -+-fdump-tree-all @gol -+-fdump-tree-original@r{[}-@var{n}@r{]} @gol -+-fdump-tree-optimized@r{[}-@var{n}@r{]} @gol -+-fdump-tree-cfg -fdump-tree-vcg -fdump-tree-alias @gol -+-fdump-tree-ch @gol -+-fdump-tree-ssa@r{[}-@var{n}@r{]} -fdump-tree-pre@r{[}-@var{n}@r{]} @gol -+-fdump-tree-ccp@r{[}-@var{n}@r{]} -fdump-tree-dce@r{[}-@var{n}@r{]} @gol -+-fdump-tree-gimple@r{[}-raw@r{]} -fdump-tree-mudflap@r{[}-@var{n}@r{]} @gol -+-fdump-tree-dom@r{[}-@var{n}@r{]} @gol -+-fdump-tree-dse@r{[}-@var{n}@r{]} @gol -+-fdump-tree-phiopt@r{[}-@var{n}@r{]} @gol -+-fdump-tree-forwprop@r{[}-@var{n}@r{]} @gol -+-fdump-tree-copyrename@r{[}-@var{n}@r{]} @gol -+-fdump-tree-nrv -fdump-tree-vect @gol -+-fdump-tree-sink @gol -+-fdump-tree-sra@r{[}-@var{n}@r{]} @gol -+-fdump-tree-fre@r{[}-@var{n}@r{]} @gol -+-fdump-tree-vrp@r{[}-@var{n}@r{]} @gol -+-ftree-vectorizer-verbose=@var{n} @gol -+-fdump-tree-storeccp@r{[}-@var{n}@r{]} @gol -+-feliminate-dwarf2-dups -feliminate-unused-debug-types @gol -+-feliminate-unused-debug-symbols -femit-class-debug-always @gol -+-fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fprofile-arcs @gol -+-frandom-seed=@var{string} -fsched-verbose=@var{n} @gol -+-fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose @gol -+-ftest-coverage -ftime-report -fvar-tracking @gol -+-g -g@var{level} -gcoff -gdwarf-2 @gol -+-ggdb -gstabs -gstabs+ -gvms -gxcoff -gxcoff+ @gol -+-fno-merge-debug-strings -fno-dwarf2-cfi-asm @gol -+-fdebug-prefix-map=@var{old}=@var{new} @gol -+-femit-struct-debug-baseonly -femit-struct-debug-reduced @gol -+-femit-struct-debug-detailed@r{[}=@var{spec-list}@r{]} @gol -+-p -pg -print-file-name=@var{library} -print-libgcc-file-name @gol -+-print-multi-directory -print-multi-lib @gol -+-print-prog-name=@var{program} -print-search-dirs -Q @gol -+-print-sysroot -print-sysroot-headers-suffix @gol -+-save-temps -time} -+ -+@item Optimization Options -+@xref{Optimize Options,,Options that Control Optimization}. -+@gccoptlist{ -+-falign-functions[=@var{n}] -falign-jumps[=@var{n}] @gol -+-falign-labels[=@var{n}] -falign-loops[=@var{n}] -fassociative-math @gol -+-fauto-inc-dec -fbranch-probabilities -fbranch-target-load-optimize @gol -+-fbranch-target-load-optimize2 -fbtr-bb-exclusive -fcaller-saves @gol -+-fcheck-data-deps -fconserve-stack -fcprop-registers -fcrossjumping @gol -+-fcse-follow-jumps -fcse-skip-blocks -fcx-fortran-rules -fcx-limited-range @gol -+-fdata-sections -fdce -fdce @gol -+-fdelayed-branch -fdelete-null-pointer-checks -fdse -fdse @gol -+-fearly-inlining -fexpensive-optimizations -ffast-math @gol -+-ffinite-math-only -ffloat-store -fforward-propagate @gol -+-ffunction-sections -fgcse -fgcse-after-reload -fgcse-las -fgcse-lm @gol -+-fgcse-sm -fif-conversion -fif-conversion2 -findirect-inlining @gol -+-finline-functions -finline-functions-called-once -finline-limit=@var{n} @gol -+-finline-small-functions -fipa-cp -fipa-cp-clone -fipa-matrix-reorg -fipa-pta @gol -+-fipa-pure-const -fipa-reference -fipa-struct-reorg @gol -+-fipa-type-escape -fira-algorithm=@var{algorithm} @gol -+-fira-region=@var{region} -fira-coalesce -fno-ira-share-save-slots @gol -+-fno-ira-share-spill-slots -fira-verbose=@var{n} @gol -+-fivopts -fkeep-inline-functions -fkeep-static-consts @gol -+-floop-block -floop-interchange -floop-strip-mine @gol -+-fmerge-all-constants -fmerge-constants -fmodulo-sched @gol -+-fmodulo-sched-allow-regmoves -fmove-loop-invariants -fmudflap @gol -+-fmudflapir -fmudflapth -fno-branch-count-reg -fno-default-inline @gol -+-fno-defer-pop -fno-function-cse -fno-guess-branch-probability @gol -+-fno-inline -fno-math-errno -fno-peephole -fno-peephole2 @gol -+-fno-sched-interblock -fno-sched-spec -fno-signed-zeros @gol -+-fno-toplevel-reorder -fno-trapping-math -fno-zero-initialized-in-bss @gol -+-fomit-frame-pointer -foptimize-register-move -foptimize-sibling-calls @gol -+-fpeel-loops -fpredictive-commoning -fprefetch-loop-arrays @gol -+-fprofile-correction -fprofile-dir=@var{path} -fprofile-generate @gol -+-fprofile-generate=@var{path} @gol -+-fprofile-use -fprofile-use=@var{path} -fprofile-values @gol -+-freciprocal-math -fregmove -frename-registers -freorder-blocks @gol -+-freorder-blocks-and-partition -freorder-functions @gol -+-frerun-cse-after-loop -freschedule-modulo-scheduled-loops @gol -+-frounding-math -frtl-abstract-sequences -fsched2-use-superblocks @gol -+-fsched2-use-traces -fsched-spec-load -fsched-spec-load-dangerous @gol -+-fsched-stalled-insns-dep[=@var{n}] -fsched-stalled-insns[=@var{n}] @gol -+-fschedule-insns -fschedule-insns2 -fsection-anchors -fsee @gol -+-fselective-scheduling -fselective-scheduling2 @gol -+-fsel-sched-pipelining -fsel-sched-pipelining-outer-loops @gol -+-fsignaling-nans -fsingle-precision-constant -fsplit-ivs-in-unroller @gol -+-fsplit-wide-types -fstack-protector -fstack-protector-all @gol -+-fstrict-aliasing -fstrict-overflow -fthread-jumps -ftracer @gol -+-ftree-builtin-call-dce -ftree-ccp -ftree-ch -ftree-copy-prop @gol -+-ftree-copyrename -ftree-dce @gol -+-ftree-dominator-opts -ftree-dse -ftree-fre -ftree-loop-im @gol -+-ftree-loop-distribution @gol -+-ftree-loop-ivcanon -ftree-loop-linear -ftree-loop-optimize @gol -+-ftree-parallelize-loops=@var{n} -ftree-pre -ftree-reassoc @gol -+-ftree-sink -ftree-sra -ftree-switch-conversion @gol -+-ftree-ter -ftree-vect-loop-version -ftree-vectorize -ftree-vrp @gol -+-funit-at-a-time -funroll-all-loops -funroll-loops @gol -+-funsafe-loop-optimizations -funsafe-math-optimizations -funswitch-loops @gol -+-fvariable-expansion-in-unroller -fvect-cost-model -fvpt -fweb @gol -+-fwhole-program @gol -+--param @var{name}=@var{value} -+-O -O0 -O1 -O2 -O3 -Os} -+ -+@item Preprocessor Options -+@xref{Preprocessor Options,,Options Controlling the Preprocessor}. -+@gccoptlist{-A@var{question}=@var{answer} @gol -+-A-@var{question}@r{[}=@var{answer}@r{]} @gol -+-C -dD -dI -dM -dN @gol -+-D@var{macro}@r{[}=@var{defn}@r{]} -E -H @gol -+-idirafter @var{dir} @gol -+-include @var{file} -imacros @var{file} @gol -+-iprefix @var{file} -iwithprefix @var{dir} @gol -+-iwithprefixbefore @var{dir} -isystem @var{dir} @gol -+-imultilib @var{dir} -isysroot @var{dir} @gol -+-M -MM -MF -MG -MP -MQ -MT -nostdinc @gol -+-P -fworking-directory -remap @gol -+-trigraphs -undef -U@var{macro} -Wp,@var{option} @gol -+-Xpreprocessor @var{option}} -+ -+@item Assembler Option -+@xref{Assembler Options,,Passing Options to the Assembler}. -+@gccoptlist{-Wa,@var{option} -Xassembler @var{option}} -+ -+@item Linker Options -+@xref{Link Options,,Options for Linking}. -+@gccoptlist{@var{object-file-name} -l@var{library} @gol -+-nostartfiles -nodefaultlibs -nostdlib -pie -rdynamic @gol -+-s -static -static-libgcc -shared -shared-libgcc -symbolic @gol -+-T @var{script} -Wl,@var{option} -Xlinker @var{option} @gol -+-u @var{symbol}} -+ -+@item Directory Options -+@xref{Directory Options,,Options for Directory Search}. -+@gccoptlist{-B@var{prefix} -I@var{dir} -iquote@var{dir} -L@var{dir} -+-specs=@var{file} -I- --sysroot=@var{dir}} -+ -+@item Target Options -+@c I wrote this xref this way to avoid overfull hbox. -- rms -+@xref{Target Options}. -+@gccoptlist{-V @var{version} -b @var{machine}} -+ -+@item Machine Dependent Options -+@xref{Submodel Options,,Hardware Models and Configurations}. -+@c This list is ordered alphanumerically by subsection name. -+@c Try and put the significant identifier (CPU or system) first, -+@c so users have a clue at guessing where the ones they want will be. -+ -+@emph{ARC Options} -+@gccoptlist{-EB -EL @gol -+-mmangle-cpu -mcpu=@var{cpu} -mtext=@var{text-section} @gol -+-mdata=@var{data-section} -mrodata=@var{readonly-data-section}} -+ -+@emph{ARM Options} -+@gccoptlist{-mapcs-frame -mno-apcs-frame @gol -+-mabi=@var{name} @gol -+-mapcs-stack-check -mno-apcs-stack-check @gol -+-mapcs-float -mno-apcs-float @gol -+-mapcs-reentrant -mno-apcs-reentrant @gol -+-msched-prolog -mno-sched-prolog @gol -+-mlittle-endian -mbig-endian -mwords-little-endian @gol -+-mfloat-abi=@var{name} -msoft-float -mhard-float -mfpe @gol -+-mthumb-interwork -mno-thumb-interwork @gol -+-mcpu=@var{name} -march=@var{name} -mfpu=@var{name} @gol -+-mstructure-size-boundary=@var{n} @gol -+-mabort-on-noreturn @gol -+-mlong-calls -mno-long-calls @gol -+-msingle-pic-base -mno-single-pic-base @gol -+-mpic-register=@var{reg} @gol -+-mnop-fun-dllimport @gol -+-mcirrus-fix-invalid-insns -mno-cirrus-fix-invalid-insns @gol -+-mpoke-function-name @gol -+-mthumb -marm @gol -+-mtpcs-frame -mtpcs-leaf-frame @gol -+-mcaller-super-interworking -mcallee-super-interworking @gol -+-mtp=@var{name} @gol -+-mword-relocations @gol -+-mfix-cortex-m3-ldrd} -+ -+@emph{AVR Options} -+@gccoptlist{-mmcu=@var{mcu} -msize -mno-interrupts @gol -+-mcall-prologues -mno-tablejump -mtiny-stack -mint8} -+ -+@emph{Blackfin Options} -+@gccoptlist{-mcpu=@var{cpu}@r{[}-@var{sirevision}@r{]} @gol -+-msim -momit-leaf-frame-pointer -mno-omit-leaf-frame-pointer @gol -+-mspecld-anomaly -mno-specld-anomaly -mcsync-anomaly -mno-csync-anomaly @gol -+-mlow-64k -mno-low64k -mstack-check-l1 -mid-shared-library @gol -+-mno-id-shared-library -mshared-library-id=@var{n} @gol -+-mleaf-id-shared-library -mno-leaf-id-shared-library @gol -+-msep-data -mno-sep-data -mlong-calls -mno-long-calls @gol -+-mfast-fp -minline-plt -mmulticore -mcorea -mcoreb -msdram @gol -+-micplb} -+ -+@emph{CRIS Options} -+@gccoptlist{-mcpu=@var{cpu} -march=@var{cpu} -mtune=@var{cpu} @gol -+-mmax-stack-frame=@var{n} -melinux-stacksize=@var{n} @gol -+-metrax4 -metrax100 -mpdebug -mcc-init -mno-side-effects @gol -+-mstack-align -mdata-align -mconst-align @gol -+-m32-bit -m16-bit -m8-bit -mno-prologue-epilogue -mno-gotplt @gol -+-melf -maout -melinux -mlinux -sim -sim2 @gol -+-mmul-bug-workaround -mno-mul-bug-workaround} -+ -+@emph{CRX Options} -+@gccoptlist{-mmac -mpush-args} -+ -+@emph{Darwin Options} -+@gccoptlist{-all_load -allowable_client -arch -arch_errors_fatal @gol -+-arch_only -bind_at_load -bundle -bundle_loader @gol -+-client_name -compatibility_version -current_version @gol -+-dead_strip @gol -+-dependency-file -dylib_file -dylinker_install_name @gol -+-dynamic -dynamiclib -exported_symbols_list @gol -+-filelist -flat_namespace -force_cpusubtype_ALL @gol -+-force_flat_namespace -headerpad_max_install_names @gol -+-iframework @gol -+-image_base -init -install_name -keep_private_externs @gol -+-multi_module -multiply_defined -multiply_defined_unused @gol -+-noall_load -no_dead_strip_inits_and_terms @gol -+-nofixprebinding -nomultidefs -noprebind -noseglinkedit @gol -+-pagezero_size -prebind -prebind_all_twolevel_modules @gol -+-private_bundle -read_only_relocs -sectalign @gol -+-sectobjectsymbols -whyload -seg1addr @gol -+-sectcreate -sectobjectsymbols -sectorder @gol -+-segaddr -segs_read_only_addr -segs_read_write_addr @gol -+-seg_addr_table -seg_addr_table_filename -seglinkedit @gol -+-segprot -segs_read_only_addr -segs_read_write_addr @gol -+-single_module -static -sub_library -sub_umbrella @gol -+-twolevel_namespace -umbrella -undefined @gol -+-unexported_symbols_list -weak_reference_mismatches @gol -+-whatsloaded -F -gused -gfull -mmacosx-version-min=@var{version} @gol -+-mkernel -mone-byte-bool} -+ -+@emph{DEC Alpha Options} -+@gccoptlist{-mno-fp-regs -msoft-float -malpha-as -mgas @gol -+-mieee -mieee-with-inexact -mieee-conformant @gol -+-mfp-trap-mode=@var{mode} -mfp-rounding-mode=@var{mode} @gol -+-mtrap-precision=@var{mode} -mbuild-constants @gol -+-mcpu=@var{cpu-type} -mtune=@var{cpu-type} @gol -+-mbwx -mmax -mfix -mcix @gol -+-mfloat-vax -mfloat-ieee @gol -+-mexplicit-relocs -msmall-data -mlarge-data @gol -+-msmall-text -mlarge-text @gol -+-mmemory-latency=@var{time}} -+ -+@emph{DEC Alpha/VMS Options} -+@gccoptlist{-mvms-return-codes} -+ -+@emph{FR30 Options} -+@gccoptlist{-msmall-model -mno-lsim} -+ -+@emph{FRV Options} -+@gccoptlist{-mgpr-32 -mgpr-64 -mfpr-32 -mfpr-64 @gol -+-mhard-float -msoft-float @gol -+-malloc-cc -mfixed-cc -mdword -mno-dword @gol -+-mdouble -mno-double @gol -+-mmedia -mno-media -mmuladd -mno-muladd @gol -+-mfdpic -minline-plt -mgprel-ro -multilib-library-pic @gol -+-mlinked-fp -mlong-calls -malign-labels @gol -+-mlibrary-pic -macc-4 -macc-8 @gol -+-mpack -mno-pack -mno-eflags -mcond-move -mno-cond-move @gol -+-moptimize-membar -mno-optimize-membar @gol -+-mscc -mno-scc -mcond-exec -mno-cond-exec @gol -+-mvliw-branch -mno-vliw-branch @gol -+-mmulti-cond-exec -mno-multi-cond-exec -mnested-cond-exec @gol -+-mno-nested-cond-exec -mtomcat-stats @gol -+-mTLS -mtls @gol -+-mcpu=@var{cpu}} -+ -+@emph{GNU/Linux Options} -+@gccoptlist{-muclibc} -+ -+@emph{H8/300 Options} -+@gccoptlist{-mrelax -mh -ms -mn -mint32 -malign-300} -+ -+@emph{HPPA Options} -+@gccoptlist{-march=@var{architecture-type} @gol -+-mbig-switch -mdisable-fpregs -mdisable-indexing @gol -+-mfast-indirect-calls -mgas -mgnu-ld -mhp-ld @gol -+-mfixed-range=@var{register-range} @gol -+-mjump-in-delay -mlinker-opt -mlong-calls @gol -+-mlong-load-store -mno-big-switch -mno-disable-fpregs @gol -+-mno-disable-indexing -mno-fast-indirect-calls -mno-gas @gol -+-mno-jump-in-delay -mno-long-load-store @gol -+-mno-portable-runtime -mno-soft-float @gol -+-mno-space-regs -msoft-float -mpa-risc-1-0 @gol -+-mpa-risc-1-1 -mpa-risc-2-0 -mportable-runtime @gol -+-mschedule=@var{cpu-type} -mspace-regs -msio -mwsio @gol -+-munix=@var{unix-std} -nolibdld -static -threads} -+ -+@emph{i386 and x86-64 Options} -+@gccoptlist{-mtune=@var{cpu-type} -march=@var{cpu-type} @gol -+-mfpmath=@var{unit} @gol -+-masm=@var{dialect} -mno-fancy-math-387 @gol -+-mno-fp-ret-in-387 -msoft-float @gol -+-mno-wide-multiply -mrtd -malign-double @gol -+-mpreferred-stack-boundary=@var{num} -+-mincoming-stack-boundary=@var{num} -+-mcld -mcx16 -msahf -mrecip @gol -+-mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -msse4 -mavx @gol -+-maes -mpclmul @gol -+-msse4a -m3dnow -mpopcnt -mabm -msse5 @gol -+-mthreads -mno-align-stringops -minline-all-stringops @gol -+-minline-stringops-dynamically -mstringop-strategy=@var{alg} @gol -+-mpush-args -maccumulate-outgoing-args -m128bit-long-double @gol -+-m96bit-long-double -mregparm=@var{num} -msseregparm @gol -+-mveclibabi=@var{type} -mpc32 -mpc64 -mpc80 -mstackrealign @gol -+-momit-leaf-frame-pointer -mno-red-zone -mno-tls-direct-seg-refs @gol -+-mcmodel=@var{code-model} @gol -+-m32 -m64 -mlarge-data-threshold=@var{num} @gol -+-mfused-madd -mno-fused-madd -msse2avx} -+ -+@emph{IA-64 Options} -+@gccoptlist{-mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic @gol -+-mvolatile-asm-stop -mregister-names -mno-sdata @gol -+-mconstant-gp -mauto-pic -minline-float-divide-min-latency @gol -+-minline-float-divide-max-throughput @gol -+-minline-int-divide-min-latency @gol -+-minline-int-divide-max-throughput @gol -+-minline-sqrt-min-latency -minline-sqrt-max-throughput @gol -+-mno-dwarf2-asm -mearly-stop-bits @gol -+-mfixed-range=@var{register-range} -mtls-size=@var{tls-size} @gol -+-mtune=@var{cpu-type} -mt -pthread -milp32 -mlp64 @gol -+-mno-sched-br-data-spec -msched-ar-data-spec -mno-sched-control-spec @gol -+-msched-br-in-data-spec -msched-ar-in-data-spec -msched-in-control-spec @gol -+-msched-ldc -mno-sched-control-ldc -mno-sched-spec-verbose @gol -+-mno-sched-prefer-non-data-spec-insns @gol -+-mno-sched-prefer-non-control-spec-insns @gol -+-mno-sched-count-spec-in-critical-path} -+ -+@emph{M32R/D Options} -+@gccoptlist{-m32r2 -m32rx -m32r @gol -+-mdebug @gol -+-malign-loops -mno-align-loops @gol -+-missue-rate=@var{number} @gol -+-mbranch-cost=@var{number} @gol -+-mmodel=@var{code-size-model-type} @gol -+-msdata=@var{sdata-type} @gol -+-mno-flush-func -mflush-func=@var{name} @gol -+-mno-flush-trap -mflush-trap=@var{number} @gol -+-G @var{num}} -+ -+@emph{M32C Options} -+@gccoptlist{-mcpu=@var{cpu} -msim -memregs=@var{number}} -+ -+@emph{M680x0 Options} -+@gccoptlist{-march=@var{arch} -mcpu=@var{cpu} -mtune=@var{tune} -+-m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 @gol -+-m68060 -mcpu32 -m5200 -m5206e -m528x -m5307 -m5407 @gol -+-mcfv4e -mbitfield -mno-bitfield -mc68000 -mc68020 @gol -+-mnobitfield -mrtd -mno-rtd -mdiv -mno-div -mshort @gol -+-mno-short -mhard-float -m68881 -msoft-float -mpcrel @gol -+-malign-int -mstrict-align -msep-data -mno-sep-data @gol -+-mshared-library-id=n -mid-shared-library -mno-id-shared-library @gol -+-mxgot -mno-xgot} -+ -+@emph{M68hc1x Options} -+@gccoptlist{-m6811 -m6812 -m68hc11 -m68hc12 -m68hcs12 @gol -+-mauto-incdec -minmax -mlong-calls -mshort @gol -+-msoft-reg-count=@var{count}} -+ -+@emph{MCore Options} -+@gccoptlist{-mhardlit -mno-hardlit -mdiv -mno-div -mrelax-immediates @gol -+-mno-relax-immediates -mwide-bitfields -mno-wide-bitfields @gol -+-m4byte-functions -mno-4byte-functions -mcallgraph-data @gol -+-mno-callgraph-data -mslow-bytes -mno-slow-bytes -mno-lsim @gol -+-mlittle-endian -mbig-endian -m210 -m340 -mstack-increment} -+ -+@emph{MIPS Options} -+@gccoptlist{-EL -EB -march=@var{arch} -mtune=@var{arch} @gol -+-mips1 -mips2 -mips3 -mips4 -mips32 -mips32r2 @gol -+-mips64 -mips64r2 @gol -+-mips16 -mno-mips16 -mflip-mips16 @gol -+-minterlink-mips16 -mno-interlink-mips16 @gol -+-mabi=@var{abi} -mabicalls -mno-abicalls @gol -+-mshared -mno-shared -mplt -mno-plt -mxgot -mno-xgot @gol -+-mgp32 -mgp64 -mfp32 -mfp64 -mhard-float -msoft-float @gol -+-msingle-float -mdouble-float -mdsp -mno-dsp -mdspr2 -mno-dspr2 @gol -+-mfpu=@var{fpu-type} @gol -+-msmartmips -mno-smartmips @gol -+-mpaired-single -mno-paired-single -mdmx -mno-mdmx @gol -+-mips3d -mno-mips3d -mmt -mno-mt -mllsc -mno-llsc @gol -+-mlong64 -mlong32 -msym32 -mno-sym32 @gol -+-G@var{num} -mlocal-sdata -mno-local-sdata @gol -+-mextern-sdata -mno-extern-sdata -mgpopt -mno-gopt @gol -+-membedded-data -mno-embedded-data @gol -+-muninit-const-in-rodata -mno-uninit-const-in-rodata @gol -+-mcode-readable=@var{setting} @gol -+-msplit-addresses -mno-split-addresses @gol -+-mexplicit-relocs -mno-explicit-relocs @gol -+-mcheck-zero-division -mno-check-zero-division @gol -+-mdivide-traps -mdivide-breaks @gol -+-mmemcpy -mno-memcpy -mlong-calls -mno-long-calls @gol -+-mmad -mno-mad -mfused-madd -mno-fused-madd -nocpp @gol -+-mfix-r4000 -mno-fix-r4000 -mfix-r4400 -mno-fix-r4400 @gol -+-mfix-r10000 -mno-fix-r10000 -mfix-vr4120 -mno-fix-vr4120 @gol -+-mfix-vr4130 -mno-fix-vr4130 -mfix-sb1 -mno-fix-sb1 @gol -+-mflush-func=@var{func} -mno-flush-func @gol -+-mbranch-cost=@var{num} -mbranch-likely -mno-branch-likely @gol -+-mfp-exceptions -mno-fp-exceptions @gol -+-mvr4130-align -mno-vr4130-align} -+ -+@emph{MMIX Options} -+@gccoptlist{-mlibfuncs -mno-libfuncs -mepsilon -mno-epsilon -mabi=gnu @gol -+-mabi=mmixware -mzero-extend -mknuthdiv -mtoplevel-symbols @gol -+-melf -mbranch-predict -mno-branch-predict -mbase-addresses @gol -+-mno-base-addresses -msingle-exit -mno-single-exit} -+ -+@emph{MN10300 Options} -+@gccoptlist{-mmult-bug -mno-mult-bug @gol -+-mam33 -mno-am33 @gol -+-mam33-2 -mno-am33-2 @gol -+-mreturn-pointer-on-d0 @gol -+-mno-crt0 -mrelax} -+ -+@emph{PDP-11 Options} -+@gccoptlist{-mfpu -msoft-float -mac0 -mno-ac0 -m40 -m45 -m10 @gol -+-mbcopy -mbcopy-builtin -mint32 -mno-int16 @gol -+-mint16 -mno-int32 -mfloat32 -mno-float64 @gol -+-mfloat64 -mno-float32 -mabshi -mno-abshi @gol -+-mbranch-expensive -mbranch-cheap @gol -+-msplit -mno-split -munix-asm -mdec-asm} -+ -+@emph{picoChip Options} -+@gccoptlist{-mae=@var{ae_type} -mvliw-lookahead=@var{N} -+-msymbol-as-address -mno-inefficient-warnings} -+ -+@emph{PowerPC Options} -+See RS/6000 and PowerPC Options. -+ -+@emph{RS/6000 and PowerPC Options} -+@gccoptlist{-mcpu=@var{cpu-type} @gol -+-mtune=@var{cpu-type} @gol -+-mpower -mno-power -mpower2 -mno-power2 @gol -+-mpowerpc -mpowerpc64 -mno-powerpc @gol -+-maltivec -mno-altivec @gol -+-mpowerpc-gpopt -mno-powerpc-gpopt @gol -+-mpowerpc-gfxopt -mno-powerpc-gfxopt @gol -+-mmfcrf -mno-mfcrf -mpopcntb -mno-popcntb -mfprnd -mno-fprnd @gol -+-mcmpb -mno-cmpb -mmfpgpr -mno-mfpgpr -mhard-dfp -mno-hard-dfp @gol -+-mnew-mnemonics -mold-mnemonics @gol -+-mfull-toc -mminimal-toc -mno-fp-in-toc -mno-sum-in-toc @gol -+-m64 -m32 -mxl-compat -mno-xl-compat -mpe @gol -+-malign-power -malign-natural @gol -+-msoft-float -mhard-float -mmultiple -mno-multiple @gol -+-msingle-float -mdouble-float -msimple-fpu @gol -+-mstring -mno-string -mupdate -mno-update @gol -+-mavoid-indexed-addresses -mno-avoid-indexed-addresses @gol -+-mfused-madd -mno-fused-madd -mbit-align -mno-bit-align @gol -+-mstrict-align -mno-strict-align -mrelocatable @gol -+-mno-relocatable -mrelocatable-lib -mno-relocatable-lib @gol -+-mtoc -mno-toc -mlittle -mlittle-endian -mbig -mbig-endian @gol -+-mdynamic-no-pic -maltivec -mswdiv @gol -+-mprioritize-restricted-insns=@var{priority} @gol -+-msched-costly-dep=@var{dependence_type} @gol -+-minsert-sched-nops=@var{scheme} @gol -+-mcall-sysv -mcall-netbsd @gol -+-maix-struct-return -msvr4-struct-return @gol -+-mabi=@var{abi-type} -msecure-plt -mbss-plt @gol -+-misel -mno-isel @gol -+-misel=yes -misel=no @gol -+-mspe -mno-spe @gol -+-mspe=yes -mspe=no @gol -+-mpaired @gol -+-mgen-cell-microcode -mwarn-cell-microcode @gol -+-mvrsave -mno-vrsave @gol -+-mmulhw -mno-mulhw @gol -+-mdlmzb -mno-dlmzb @gol -+-mfloat-gprs=yes -mfloat-gprs=no -mfloat-gprs=single -mfloat-gprs=double @gol -+-mprototype -mno-prototype @gol -+-msim -mmvme -mads -myellowknife -memb -msdata @gol -+-msdata=@var{opt} -mvxworks -G @var{num} -pthread} -+ -+@emph{S/390 and zSeries Options} -+@gccoptlist{-mtune=@var{cpu-type} -march=@var{cpu-type} @gol -+-mhard-float -msoft-float -mhard-dfp -mno-hard-dfp @gol -+-mlong-double-64 -mlong-double-128 @gol -+-mbackchain -mno-backchain -mpacked-stack -mno-packed-stack @gol -+-msmall-exec -mno-small-exec -mmvcle -mno-mvcle @gol -+-m64 -m31 -mdebug -mno-debug -mesa -mzarch @gol -+-mtpf-trace -mno-tpf-trace -mfused-madd -mno-fused-madd @gol -+-mwarn-framesize -mwarn-dynamicstack -mstack-size -mstack-guard} -+ -+@emph{Score Options} -+@gccoptlist{-meb -mel @gol -+-mnhwloop @gol -+-muls @gol -+-mmac @gol -+-mscore5 -mscore5u -mscore7 -mscore7d} -+ -+@emph{SH Options} -+@gccoptlist{-m1 -m2 -m2e -m3 -m3e @gol -+-m4-nofpu -m4-single-only -m4-single -m4 @gol -+-m4a-nofpu -m4a-single-only -m4a-single -m4a -m4al @gol -+-m5-64media -m5-64media-nofpu @gol -+-m5-32media -m5-32media-nofpu @gol -+-m5-compact -m5-compact-nofpu @gol -+-mb -ml -mdalign -mrelax @gol -+-mbigtable -mfmovd -mhitachi -mrenesas -mno-renesas -mnomacsave @gol -+-mieee -mbitops -misize -minline-ic_invalidate -mpadstruct -mspace @gol -+-mprefergot -musermode -multcost=@var{number} -mdiv=@var{strategy} @gol -+-mdivsi3_libfunc=@var{name} -mfixed-range=@var{register-range} @gol -+-madjust-unroll -mindexed-addressing -mgettrcost=@var{number} -mpt-fixed @gol -+-minvalid-symbols} -+ -+@emph{SPARC Options} -+@gccoptlist{-mcpu=@var{cpu-type} @gol -+-mtune=@var{cpu-type} @gol -+-mcmodel=@var{code-model} @gol -+-m32 -m64 -mapp-regs -mno-app-regs @gol -+-mfaster-structs -mno-faster-structs @gol -+-mfpu -mno-fpu -mhard-float -msoft-float @gol -+-mhard-quad-float -msoft-quad-float @gol -+-mimpure-text -mno-impure-text -mlittle-endian @gol -+-mstack-bias -mno-stack-bias @gol -+-munaligned-doubles -mno-unaligned-doubles @gol -+-mv8plus -mno-v8plus -mvis -mno-vis -+-threads -pthreads -pthread} -+ -+@emph{SPU Options} -+@gccoptlist{-mwarn-reloc -merror-reloc @gol -+-msafe-dma -munsafe-dma @gol -+-mbranch-hints @gol -+-msmall-mem -mlarge-mem -mstdmain @gol -+-mfixed-range=@var{register-range}} -+ -+@emph{System V Options} -+@gccoptlist{-Qy -Qn -YP,@var{paths} -Ym,@var{dir}} -+ -+@emph{V850 Options} -+@gccoptlist{-mlong-calls -mno-long-calls -mep -mno-ep @gol -+-mprolog-function -mno-prolog-function -mspace @gol -+-mtda=@var{n} -msda=@var{n} -mzda=@var{n} @gol -+-mapp-regs -mno-app-regs @gol -+-mdisable-callt -mno-disable-callt @gol -+-mv850e1 @gol -+-mv850e @gol -+-mv850 -mbig-switch} -+ -+@emph{VAX Options} -+@gccoptlist{-mg -mgnu -munix} -+ -+@emph{VxWorks Options} -+@gccoptlist{-mrtp -non-static -Bstatic -Bdynamic @gol -+-Xbind-lazy -Xbind-now} -+ -+@emph{x86-64 Options} -+See i386 and x86-64 Options. -+ -+@emph{i386 and x86-64 Windows Options} -+@gccoptlist{-mconsole -mcygwin -mno-cygwin -mdll -+-mnop-fun-dllimport -mthread -mwin32 -mwindows} -+ -+@emph{Xstormy16 Options} -+@gccoptlist{-msim} -+ -+@emph{Xtensa Options} -+@gccoptlist{-mconst16 -mno-const16 @gol -+-mfused-madd -mno-fused-madd @gol -+-mserialize-volatile -mno-serialize-volatile @gol -+-mtext-section-literals -mno-text-section-literals @gol -+-mtarget-align -mno-target-align @gol -+-mlongcalls -mno-longcalls} -+ -+@emph{zSeries Options} -+See S/390 and zSeries Options. -+ -+@item Code Generation Options -+@xref{Code Gen Options,,Options for Code Generation Conventions}. -+@gccoptlist{-fcall-saved-@var{reg} -fcall-used-@var{reg} @gol -+-ffixed-@var{reg} -fexceptions @gol -+-fnon-call-exceptions -funwind-tables @gol -+-fasynchronous-unwind-tables @gol -+-finhibit-size-directive -finstrument-functions @gol -+-finstrument-functions-exclude-function-list=@var{sym},@var{sym},@dots{} @gol -+-finstrument-functions-exclude-file-list=@var{file},@var{file},@dots{} @gol -+-fno-common -fno-ident @gol -+-fpcc-struct-return -fpic -fPIC -fpie -fPIE @gol -+-fno-jump-tables @gol -+-frecord-gcc-switches @gol -+-freg-struct-return -fshort-enums @gol -+-fshort-double -fshort-wchar @gol -+-fverbose-asm -fpack-struct[=@var{n}] -fstack-check @gol -+-fstack-limit-register=@var{reg} -fstack-limit-symbol=@var{sym} @gol -+-fno-stack-limit -fargument-alias -fargument-noalias @gol -+-fargument-noalias-global -fargument-noalias-anything @gol -+-fleading-underscore -ftls-model=@var{model} @gol -+-ftrapv -fwrapv -fbounds-check @gol -+-fvisibility} -+@end table -+ -+@menu -+* Overall Options:: Controlling the kind of output: -+ an executable, object files, assembler files, -+ or preprocessed source. -+* C Dialect Options:: Controlling the variant of C language compiled. -+* C++ Dialect Options:: Variations on C++. -+* Objective-C and Objective-C++ Dialect Options:: Variations on Objective-C -+ and Objective-C++. -+* Language Independent Options:: Controlling how diagnostics should be -+ formatted. -+* Warning Options:: How picky should the compiler be? -+* Debugging Options:: Symbol tables, measurements, and debugging dumps. -+* Optimize Options:: How much optimization? -+* Preprocessor Options:: Controlling header files and macro definitions. -+ Also, getting dependency information for Make. -+* Assembler Options:: Passing options to the assembler. -+* Link Options:: Specifying libraries and so on. -+* Directory Options:: Where to find header files and libraries. -+ Where to find the compiler executable files. -+* Spec Files:: How to pass switches to sub-processes. -+* Target Options:: Running a cross-compiler, or an old version of GCC. -+@end menu -+ -+@node Overall Options -+@section Options Controlling the Kind of Output -+ -+Compilation can involve up to four stages: preprocessing, compilation -+proper, assembly and linking, always in that order. GCC is capable of -+preprocessing and compiling several files either into several -+assembler input files, or into one assembler input file; then each -+assembler input file produces an object file, and linking combines all -+the object files (those newly compiled, and those specified as input) -+into an executable file. -+ -+@cindex file name suffix -+For any given input file, the file name suffix determines what kind of -+compilation is done: -+ -+@table @gcctabopt -+@item @var{file}.c -+C source code which must be preprocessed. -+ -+@item @var{file}.i -+C source code which should not be preprocessed. -+ -+@item @var{file}.ii -+C++ source code which should not be preprocessed. -+ -+@item @var{file}.m -+Objective-C source code. Note that you must link with the @file{libobjc} -+library to make an Objective-C program work. -+ -+@item @var{file}.mi -+Objective-C source code which should not be preprocessed. -+ -+@item @var{file}.mm -+@itemx @var{file}.M -+Objective-C++ source code. Note that you must link with the @file{libobjc} -+library to make an Objective-C++ program work. Note that @samp{.M} refers -+to a literal capital M@. -+ -+@item @var{file}.mii -+Objective-C++ source code which should not be preprocessed. -+ -+@item @var{file}.h -+C, C++, Objective-C or Objective-C++ header file to be turned into a -+precompiled header. -+ -+@item @var{file}.cc -+@itemx @var{file}.cp -+@itemx @var{file}.cxx -+@itemx @var{file}.cpp -+@itemx @var{file}.CPP -+@itemx @var{file}.c++ -+@itemx @var{file}.C -+C++ source code which must be preprocessed. Note that in @samp{.cxx}, -+the last two letters must both be literally @samp{x}. Likewise, -+@samp{.C} refers to a literal capital C@. -+ -+@item @var{file}.mm -+@itemx @var{file}.M -+Objective-C++ source code which must be preprocessed. -+ -+@item @var{file}.mii -+Objective-C++ source code which should not be preprocessed. -+ -+@item @var{file}.hh -+@itemx @var{file}.H -+@itemx @var{file}.hp -+@itemx @var{file}.hxx -+@itemx @var{file}.hpp -+@itemx @var{file}.HPP -+@itemx @var{file}.h++ -+@itemx @var{file}.tcc -+C++ header file to be turned into a precompiled header. -+ -+@item @var{file}.f -+@itemx @var{file}.for -+@itemx @var{file}.ftn -+Fixed form Fortran source code which should not be preprocessed. -+ -+@item @var{file}.F -+@itemx @var{file}.FOR -+@itemx @var{file}.fpp -+@itemx @var{file}.FPP -+@itemx @var{file}.FTN -+Fixed form Fortran source code which must be preprocessed (with the traditional -+preprocessor). -+ -+@item @var{file}.f90 -+@itemx @var{file}.f95 -+@itemx @var{file}.f03 -+@itemx @var{file}.f08 -+Free form Fortran source code which should not be preprocessed. -+ -+@item @var{file}.F90 -+@itemx @var{file}.F95 -+@itemx @var{file}.F03 -+@itemx @var{file}.F08 -+Free form Fortran source code which must be preprocessed (with the -+traditional preprocessor). -+ -+@c FIXME: Descriptions of Java file types. -+@c @var{file}.java -+@c @var{file}.class -+@c @var{file}.zip -+@c @var{file}.jar -+ -+@item @var{file}.ads -+Ada source code file which contains a library unit declaration (a -+declaration of a package, subprogram, or generic, or a generic -+instantiation), or a library unit renaming declaration (a package, -+generic, or subprogram renaming declaration). Such files are also -+called @dfn{specs}. -+ -+@item @var{file}.adb -+Ada source code file containing a library unit body (a subprogram or -+package body). Such files are also called @dfn{bodies}. -+ -+@c GCC also knows about some suffixes for languages not yet included: -+@c Pascal: -+@c @var{file}.p -+@c @var{file}.pas -+@c Ratfor: -+@c @var{file}.r -+ -+@item @var{file}.s -+Assembler code. -+ -+@item @var{file}.S -+@itemx @var{file}.sx -+Assembler code which must be preprocessed. -+ -+@item @var{other} -+An object file to be fed straight into linking. -+Any file name with no recognized suffix is treated this way. -+@end table -+ -+@opindex x -+You can specify the input language explicitly with the @option{-x} option: -+ -+@table @gcctabopt -+@item -x @var{language} -+Specify explicitly the @var{language} for the following input files -+(rather than letting the compiler choose a default based on the file -+name suffix). This option applies to all following input files until -+the next @option{-x} option. Possible values for @var{language} are: -+@smallexample -+c c-header c-cpp-output -+c++ c++-header c++-cpp-output -+objective-c objective-c-header objective-c-cpp-output -+objective-c++ objective-c++-header objective-c++-cpp-output -+assembler assembler-with-cpp -+ada -+f77 f77-cpp-input f95 f95-cpp-input -+java -+@end smallexample -+ -+@item -x none -+Turn off any specification of a language, so that subsequent files are -+handled according to their file name suffixes (as they are if @option{-x} -+has not been used at all). -+ -+@item -pass-exit-codes -+@opindex pass-exit-codes -+Normally the @command{gcc} program will exit with the code of 1 if any -+phase of the compiler returns a non-success return code. If you specify -+@option{-pass-exit-codes}, the @command{gcc} program will instead return with -+numerically highest error produced by any phase that returned an error -+indication. The C, C++, and Fortran frontends return 4, if an internal -+compiler error is encountered. -+@end table -+ -+If you only want some of the stages of compilation, you can use -+@option{-x} (or filename suffixes) to tell @command{gcc} where to start, and -+one of the options @option{-c}, @option{-S}, or @option{-E} to say where -+@command{gcc} is to stop. Note that some combinations (for example, -+@samp{-x cpp-output -E}) instruct @command{gcc} to do nothing at all. -+ -+@table @gcctabopt -+@item -c -+@opindex c -+Compile or assemble the source files, but do not link. The linking -+stage simply is not done. The ultimate output is in the form of an -+object file for each source file. -+ -+By default, the object file name for a source file is made by replacing -+the suffix @samp{.c}, @samp{.i}, @samp{.s}, etc., with @samp{.o}. -+ -+Unrecognized input files, not requiring compilation or assembly, are -+ignored. -+ -+@item -S -+@opindex S -+Stop after the stage of compilation proper; do not assemble. The output -+is in the form of an assembler code file for each non-assembler input -+file specified. -+ -+By default, the assembler file name for a source file is made by -+replacing the suffix @samp{.c}, @samp{.i}, etc., with @samp{.s}. -+ -+Input files that don't require compilation are ignored. -+ -+@item -E -+@opindex E -+Stop after the preprocessing stage; do not run the compiler proper. The -+output is in the form of preprocessed source code, which is sent to the -+standard output. -+ -+Input files which don't require preprocessing are ignored. -+ -+@cindex output file option -+@item -o @var{file} -+@opindex o -+Place output in file @var{file}. This applies regardless to whatever -+sort of output is being produced, whether it be an executable file, -+an object file, an assembler file or preprocessed C code. -+ -+If @option{-o} is not specified, the default is to put an executable -+file in @file{a.out}, the object file for -+@file{@var{source}.@var{suffix}} in @file{@var{source}.o}, its -+assembler file in @file{@var{source}.s}, a precompiled header file in -+@file{@var{source}.@var{suffix}.gch}, and all preprocessed C source on -+standard output. -+ -+@item -v -+@opindex v -+Print (on standard error output) the commands executed to run the stages -+of compilation. Also print the version number of the compiler driver -+program and of the preprocessor and the compiler proper. -+ -+@item -### -+@opindex ### -+Like @option{-v} except the commands are not executed and all command -+arguments are quoted. This is useful for shell scripts to capture the -+driver-generated command lines. -+ -+@item -pipe -+@opindex pipe -+Use pipes rather than temporary files for communication between the -+various stages of compilation. This fails to work on some systems where -+the assembler is unable to read from a pipe; but the GNU assembler has -+no trouble. -+ -+@item -combine -+@opindex combine -+If you are compiling multiple source files, this option tells the driver -+to pass all the source files to the compiler at once (for those -+languages for which the compiler can handle this). This will allow -+intermodule analysis (IMA) to be performed by the compiler. Currently the only -+language for which this is supported is C@. If you pass source files for -+multiple languages to the driver, using this option, the driver will invoke -+the compiler(s) that support IMA once each, passing each compiler all the -+source files appropriate for it. For those languages that do not support -+IMA this option will be ignored, and the compiler will be invoked once for -+each source file in that language. If you use this option in conjunction -+with @option{-save-temps}, the compiler will generate multiple -+pre-processed files -+(one for each source file), but only one (combined) @file{.o} or -+@file{.s} file. -+ -+@item --help -+@opindex help -+Print (on the standard output) a description of the command line options -+understood by @command{gcc}. If the @option{-v} option is also specified -+then @option{--help} will also be passed on to the various processes -+invoked by @command{gcc}, so that they can display the command line options -+they accept. If the @option{-Wextra} option has also been specified -+(prior to the @option{--help} option), then command line options which -+have no documentation associated with them will also be displayed. -+ -+@item --target-help -+@opindex target-help -+Print (on the standard output) a description of target-specific command -+line options for each tool. For some targets extra target-specific -+information may also be printed. -+ -+@item --help=@{@var{class}@r{|[}^@r{]}@var{qualifier}@}@r{[},@dots{}@r{]} -+Print (on the standard output) a description of the command line -+options understood by the compiler that fit into all specified classes -+and qualifiers. These are the supported classes: -+ -+@table @asis -+@item @samp{optimizers} -+This will display all of the optimization options supported by the -+compiler. -+ -+@item @samp{warnings} -+This will display all of the options controlling warning messages -+produced by the compiler. -+ -+@item @samp{target} -+This will display target-specific options. Unlike the -+@option{--target-help} option however, target-specific options of the -+linker and assembler will not be displayed. This is because those -+tools do not currently support the extended @option{--help=} syntax. -+ -+@item @samp{params} -+This will display the values recognized by the @option{--param} -+option. -+ -+@item @var{language} -+This will display the options supported for @var{language}, where -+@var{language} is the name of one of the languages supported in this -+version of GCC. -+ -+@item @samp{common} -+This will display the options that are common to all languages. -+@end table -+ -+These are the supported qualifiers: -+ -+@table @asis -+@item @samp{undocumented} -+Display only those options which are undocumented. -+ -+@item @samp{joined} -+Display options which take an argument that appears after an equal -+sign in the same continuous piece of text, such as: -+@samp{--help=target}. -+ -+@item @samp{separate} -+Display options which take an argument that appears as a separate word -+following the original option, such as: @samp{-o output-file}. -+@end table -+ -+Thus for example to display all the undocumented target-specific -+switches supported by the compiler the following can be used: -+ -+@smallexample -+--help=target,undocumented -+@end smallexample -+ -+The sense of a qualifier can be inverted by prefixing it with the -+@samp{^} character, so for example to display all binary warning -+options (i.e., ones that are either on or off and that do not take an -+argument), which have a description the following can be used: -+ -+@smallexample -+--help=warnings,^joined,^undocumented -+@end smallexample -+ -+The argument to @option{--help=} should not consist solely of inverted -+qualifiers. -+ -+Combining several classes is possible, although this usually -+restricts the output by so much that there is nothing to display. One -+case where it does work however is when one of the classes is -+@var{target}. So for example to display all the target-specific -+optimization options the following can be used: -+ -+@smallexample -+--help=target,optimizers -+@end smallexample -+ -+The @option{--help=} option can be repeated on the command line. Each -+successive use will display its requested class of options, skipping -+those that have already been displayed. -+ -+If the @option{-Q} option appears on the command line before the -+@option{--help=} option, then the descriptive text displayed by -+@option{--help=} is changed. Instead of describing the displayed -+options, an indication is given as to whether the option is enabled, -+disabled or set to a specific value (assuming that the compiler -+knows this at the point where the @option{--help=} option is used). -+ -+Here is a truncated example from the ARM port of @command{gcc}: -+ -+@smallexample -+ % gcc -Q -mabi=2 --help=target -c -+ The following options are target specific: -+ -mabi= 2 -+ -mabort-on-noreturn [disabled] -+ -mapcs [disabled] -+@end smallexample -+ -+The output is sensitive to the effects of previous command line -+options, so for example it is possible to find out which optimizations -+are enabled at @option{-O2} by using: -+ -+@smallexample -+-Q -O2 --help=optimizers -+@end smallexample -+ -+Alternatively you can discover which binary optimizations are enabled -+by @option{-O3} by using: -+ -+@smallexample -+gcc -c -Q -O3 --help=optimizers > /tmp/O3-opts -+gcc -c -Q -O2 --help=optimizers > /tmp/O2-opts -+diff /tmp/O2-opts /tmp/O3-opts | grep enabled -+@end smallexample -+ -+@item --version -+@opindex version -+Display the version number and copyrights of the invoked GCC@. -+ -+@item -wrapper -+@opindex wrapper -+Invoke all subcommands under a wrapper program. It takes a single -+comma separated list as an argument, which will be used to invoke -+the wrapper: -+ -+@smallexample -+gcc -c t.c -wrapper gdb,--args -+@end smallexample -+ -+This will invoke all subprograms of gcc under "gdb --args", -+thus cc1 invocation will be "gdb --args cc1 ...". -+ -+@include @value{srcdir}/../libiberty/at-file.texi -+@end table -+ -+@node Invoking G++ -+@section Compiling C++ Programs -+ -+@cindex suffixes for C++ source -+@cindex C++ source file suffixes -+C++ source files conventionally use one of the suffixes @samp{.C}, -+@samp{.cc}, @samp{.cpp}, @samp{.CPP}, @samp{.c++}, @samp{.cp}, or -+@samp{.cxx}; C++ header files often use @samp{.hh}, @samp{.hpp}, -+@samp{.H}, or (for shared template code) @samp{.tcc}; and -+preprocessed C++ files use the suffix @samp{.ii}. GCC recognizes -+files with these names and compiles them as C++ programs even if you -+call the compiler the same way as for compiling C programs (usually -+with the name @command{gcc}). -+ -+@findex g++ -+@findex c++ -+However, the use of @command{gcc} does not add the C++ library. -+@command{g++} is a program that calls GCC and treats @samp{.c}, -+@samp{.h} and @samp{.i} files as C++ source files instead of C source -+files unless @option{-x} is used, and automatically specifies linking -+against the C++ library. This program is also useful when -+precompiling a C header file with a @samp{.h} extension for use in C++ -+compilations. On many systems, @command{g++} is also installed with -+the name @command{c++}. -+ -+@cindex invoking @command{g++} -+When you compile C++ programs, you may specify many of the same -+command-line options that you use for compiling programs in any -+language; or command-line options meaningful for C and related -+languages; or options that are meaningful only for C++ programs. -+@xref{C Dialect Options,,Options Controlling C Dialect}, for -+explanations of options for languages related to C@. -+@xref{C++ Dialect Options,,Options Controlling C++ Dialect}, for -+explanations of options that are meaningful only for C++ programs. -+ -+@node C Dialect Options -+@section Options Controlling C Dialect -+@cindex dialect options -+@cindex language dialect options -+@cindex options, dialect -+ -+The following options control the dialect of C (or languages derived -+from C, such as C++, Objective-C and Objective-C++) that the compiler -+accepts: -+ -+@table @gcctabopt -+@cindex ANSI support -+@cindex ISO support -+@item -ansi -+@opindex ansi -+In C mode, this is equivalent to @samp{-std=c89}. In C++ mode, it is -+equivalent to @samp{-std=c++98}. -+ -+This turns off certain features of GCC that are incompatible with ISO -+C90 (when compiling C code), or of standard C++ (when compiling C++ code), -+such as the @code{asm} and @code{typeof} keywords, and -+predefined macros such as @code{unix} and @code{vax} that identify the -+type of system you are using. It also enables the undesirable and -+rarely used ISO trigraph feature. For the C compiler, -+it disables recognition of C++ style @samp{//} comments as well as -+the @code{inline} keyword. -+ -+The alternate keywords @code{__asm__}, @code{__extension__}, -+@code{__inline__} and @code{__typeof__} continue to work despite -+@option{-ansi}. You would not want to use them in an ISO C program, of -+course, but it is useful to put them in header files that might be included -+in compilations done with @option{-ansi}. Alternate predefined macros -+such as @code{__unix__} and @code{__vax__} are also available, with or -+without @option{-ansi}. -+ -+The @option{-ansi} option does not cause non-ISO programs to be -+rejected gratuitously. For that, @option{-pedantic} is required in -+addition to @option{-ansi}. @xref{Warning Options}. -+ -+The macro @code{__STRICT_ANSI__} is predefined when the @option{-ansi} -+option is used. Some header files may notice this macro and refrain -+from declaring certain functions or defining certain macros that the -+ISO standard doesn't call for; this is to avoid interfering with any -+programs that might use these names for other things. -+ -+Functions that would normally be built in but do not have semantics -+defined by ISO C (such as @code{alloca} and @code{ffs}) are not built-in -+functions when @option{-ansi} is used. @xref{Other Builtins,,Other -+built-in functions provided by GCC}, for details of the functions -+affected. -+ -+@item -std= -+@opindex std -+Determine the language standard. @xref{Standards,,Language Standards -+Supported by GCC}, for details of these standard versions. This option -+is currently only supported when compiling C or C++. -+ -+The compiler can accept several base standards, such as @samp{c89} or -+@samp{c++98}, and GNU dialects of those standards, such as -+@samp{gnu89} or @samp{gnu++98}. By specifying a base standard, the -+compiler will accept all programs following that standard and those -+using GNU extensions that do not contradict it. For example, -+@samp{-std=c89} turns off certain features of GCC that are -+incompatible with ISO C90, such as the @code{asm} and @code{typeof} -+keywords, but not other GNU extensions that do not have a meaning in -+ISO C90, such as omitting the middle term of a @code{?:} -+expression. On the other hand, by specifying a GNU dialect of a -+standard, all features the compiler support are enabled, even when -+those features change the meaning of the base standard and some -+strict-conforming programs may be rejected. The particular standard -+is used by @option{-pedantic} to identify which features are GNU -+extensions given that version of the standard. For example -+@samp{-std=gnu89 -pedantic} would warn about C++ style @samp{//} -+comments, while @samp{-std=gnu99 -pedantic} would not. -+ -+A value for this option must be provided; possible values are -+ -+@table @samp -+@item c89 -+@itemx iso9899:1990 -+Support all ISO C90 programs (certain GNU extensions that conflict -+with ISO C90 are disabled). Same as @option{-ansi} for C code. -+ -+@item iso9899:199409 -+ISO C90 as modified in amendment 1. -+ -+@item c99 -+@itemx c9x -+@itemx iso9899:1999 -+@itemx iso9899:199x -+ISO C99. Note that this standard is not yet fully supported; see -+@w{@uref{http://gcc.gnu.org/gcc-4.4/c99status.html}} for more information. The -+names @samp{c9x} and @samp{iso9899:199x} are deprecated. -+ -+@item gnu89 -+GNU dialect of ISO C90 (including some C99 features). This -+is the default for C code. -+ -+@item gnu99 -+@itemx gnu9x -+GNU dialect of ISO C99. When ISO C99 is fully implemented in GCC, -+this will become the default. The name @samp{gnu9x} is deprecated. -+ -+@item c++98 -+The 1998 ISO C++ standard plus amendments. Same as @option{-ansi} for -+C++ code. -+ -+@item gnu++98 -+GNU dialect of @option{-std=c++98}. This is the default for -+C++ code. -+ -+@item c++0x -+The working draft of the upcoming ISO C++0x standard. This option -+enables experimental features that are likely to be included in -+C++0x. The working draft is constantly changing, and any feature that is -+enabled by this flag may be removed from future versions of GCC if it is -+not part of the C++0x standard. -+ -+@item gnu++0x -+GNU dialect of @option{-std=c++0x}. This option enables -+experimental features that may be removed in future versions of GCC. -+@end table -+ -+@item -fgnu89-inline -+@opindex fgnu89-inline -+The option @option{-fgnu89-inline} tells GCC to use the traditional -+GNU semantics for @code{inline} functions when in C99 mode. -+@xref{Inline,,An Inline Function is As Fast As a Macro}. This option -+is accepted and ignored by GCC versions 4.1.3 up to but not including -+4.3. In GCC versions 4.3 and later it changes the behavior of GCC in -+C99 mode. Using this option is roughly equivalent to adding the -+@code{gnu_inline} function attribute to all inline functions -+(@pxref{Function Attributes}). -+ -+The option @option{-fno-gnu89-inline} explicitly tells GCC to use the -+C99 semantics for @code{inline} when in C99 or gnu99 mode (i.e., it -+specifies the default behavior). This option was first supported in -+GCC 4.3. This option is not supported in C89 or gnu89 mode. -+ -+The preprocessor macros @code{__GNUC_GNU_INLINE__} and -+@code{__GNUC_STDC_INLINE__} may be used to check which semantics are -+in effect for @code{inline} functions. @xref{Common Predefined -+Macros,,,cpp,The C Preprocessor}. -+ -+@item -aux-info @var{filename} -+@opindex aux-info -+Output to the given filename prototyped declarations for all functions -+declared and/or defined in a translation unit, including those in header -+files. This option is silently ignored in any language other than C@. -+ -+Besides declarations, the file indicates, in comments, the origin of -+each declaration (source file and line), whether the declaration was -+implicit, prototyped or unprototyped (@samp{I}, @samp{N} for new or -+@samp{O} for old, respectively, in the first character after the line -+number and the colon), and whether it came from a declaration or a -+definition (@samp{C} or @samp{F}, respectively, in the following -+character). In the case of function definitions, a K&R-style list of -+arguments followed by their declarations is also provided, inside -+comments, after the declaration. -+ -+@item -fno-asm -+@opindex fno-asm -+Do not recognize @code{asm}, @code{inline} or @code{typeof} as a -+keyword, so that code can use these words as identifiers. You can use -+the keywords @code{__asm__}, @code{__inline__} and @code{__typeof__} -+instead. @option{-ansi} implies @option{-fno-asm}. -+ -+In C++, this switch only affects the @code{typeof} keyword, since -+@code{asm} and @code{inline} are standard keywords. You may want to -+use the @option{-fno-gnu-keywords} flag instead, which has the same -+effect. In C99 mode (@option{-std=c99} or @option{-std=gnu99}), this -+switch only affects the @code{asm} and @code{typeof} keywords, since -+@code{inline} is a standard keyword in ISO C99. -+ -+@item -fno-builtin -+@itemx -fno-builtin-@var{function} -+@opindex fno-builtin -+@cindex built-in functions -+Don't recognize built-in functions that do not begin with -+@samp{__builtin_} as prefix. @xref{Other Builtins,,Other built-in -+functions provided by GCC}, for details of the functions affected, -+including those which are not built-in functions when @option{-ansi} or -+@option{-std} options for strict ISO C conformance are used because they -+do not have an ISO standard meaning. -+ -+GCC normally generates special code to handle certain built-in functions -+more efficiently; for instance, calls to @code{alloca} may become single -+instructions that adjust the stack directly, and calls to @code{memcpy} -+may become inline copy loops. The resulting code is often both smaller -+and faster, but since the function calls no longer appear as such, you -+cannot set a breakpoint on those calls, nor can you change the behavior -+of the functions by linking with a different library. In addition, -+when a function is recognized as a built-in function, GCC may use -+information about that function to warn about problems with calls to -+that function, or to generate more efficient code, even if the -+resulting code still contains calls to that function. For example, -+warnings are given with @option{-Wformat} for bad calls to -+@code{printf}, when @code{printf} is built in, and @code{strlen} is -+known not to modify global memory. -+ -+With the @option{-fno-builtin-@var{function}} option -+only the built-in function @var{function} is -+disabled. @var{function} must not begin with @samp{__builtin_}. If a -+function is named that is not built-in in this version of GCC, this -+option is ignored. There is no corresponding -+@option{-fbuiltin-@var{function}} option; if you wish to enable -+built-in functions selectively when using @option{-fno-builtin} or -+@option{-ffreestanding}, you may define macros such as: -+ -+@smallexample -+#define abs(n) __builtin_abs ((n)) -+#define strcpy(d, s) __builtin_strcpy ((d), (s)) -+@end smallexample -+ -+@item -fhosted -+@opindex fhosted -+@cindex hosted environment -+ -+Assert that compilation takes place in a hosted environment. This implies -+@option{-fbuiltin}. A hosted environment is one in which the -+entire standard library is available, and in which @code{main} has a return -+type of @code{int}. Examples are nearly everything except a kernel. -+This is equivalent to @option{-fno-freestanding}. -+ -+@item -ffreestanding -+@opindex ffreestanding -+@cindex hosted environment -+ -+Assert that compilation takes place in a freestanding environment. This -+implies @option{-fno-builtin}. A freestanding environment -+is one in which the standard library may not exist, and program startup may -+not necessarily be at @code{main}. The most obvious example is an OS kernel. -+This is equivalent to @option{-fno-hosted}. -+ -+@xref{Standards,,Language Standards Supported by GCC}, for details of -+freestanding and hosted environments. -+ -+@item -fopenmp -+@opindex fopenmp -+@cindex openmp parallel -+Enable handling of OpenMP directives @code{#pragma omp} in C/C++ and -+@code{!$omp} in Fortran. When @option{-fopenmp} is specified, the -+compiler generates parallel code according to the OpenMP Application -+Program Interface v2.5 @w{@uref{http://www.openmp.org/}}. This option -+implies @option{-pthread}, and thus is only supported on targets that -+have support for @option{-pthread}. -+ -+@item -fms-extensions -+@opindex fms-extensions -+Accept some non-standard constructs used in Microsoft header files. -+ -+Some cases of unnamed fields in structures and unions are only -+accepted with this option. @xref{Unnamed Fields,,Unnamed struct/union -+fields within structs/unions}, for details. -+ -+@item -trigraphs -+@opindex trigraphs -+Support ISO C trigraphs. The @option{-ansi} option (and @option{-std} -+options for strict ISO C conformance) implies @option{-trigraphs}. -+ -+@item -no-integrated-cpp -+@opindex no-integrated-cpp -+Performs a compilation in two passes: preprocessing and compiling. This -+option allows a user supplied "cc1", "cc1plus", or "cc1obj" via the -+@option{-B} option. The user supplied compilation step can then add in -+an additional preprocessing step after normal preprocessing but before -+compiling. The default is to use the integrated cpp (internal cpp) -+ -+The semantics of this option will change if "cc1", "cc1plus", and -+"cc1obj" are merged. -+ -+@cindex traditional C language -+@cindex C language, traditional -+@item -traditional -+@itemx -traditional-cpp -+@opindex traditional-cpp -+@opindex traditional -+Formerly, these options caused GCC to attempt to emulate a pre-standard -+C compiler. They are now only supported with the @option{-E} switch. -+The preprocessor continues to support a pre-standard mode. See the GNU -+CPP manual for details. -+ -+@item -fcond-mismatch -+@opindex fcond-mismatch -+Allow conditional expressions with mismatched types in the second and -+third arguments. The value of such an expression is void. This option -+is not supported for C++. -+ -+@item -flax-vector-conversions -+@opindex flax-vector-conversions -+Allow implicit conversions between vectors with differing numbers of -+elements and/or incompatible element types. This option should not be -+used for new code. -+ -+@item -funsigned-char -+@opindex funsigned-char -+Let the type @code{char} be unsigned, like @code{unsigned char}. -+ -+Each kind of machine has a default for what @code{char} should -+be. It is either like @code{unsigned char} by default or like -+@code{signed char} by default. -+ -+Ideally, a portable program should always use @code{signed char} or -+@code{unsigned char} when it depends on the signedness of an object. -+But many programs have been written to use plain @code{char} and -+expect it to be signed, or expect it to be unsigned, depending on the -+machines they were written for. This option, and its inverse, let you -+make such a program work with the opposite default. -+ -+The type @code{char} is always a distinct type from each of -+@code{signed char} or @code{unsigned char}, even though its behavior -+is always just like one of those two. -+ -+@item -fsigned-char -+@opindex fsigned-char -+Let the type @code{char} be signed, like @code{signed char}. -+ -+Note that this is equivalent to @option{-fno-unsigned-char}, which is -+the negative form of @option{-funsigned-char}. Likewise, the option -+@option{-fno-signed-char} is equivalent to @option{-funsigned-char}. -+ -+@item -fsigned-bitfields -+@itemx -funsigned-bitfields -+@itemx -fno-signed-bitfields -+@itemx -fno-unsigned-bitfields -+@opindex fsigned-bitfields -+@opindex funsigned-bitfields -+@opindex fno-signed-bitfields -+@opindex fno-unsigned-bitfields -+These options control whether a bit-field is signed or unsigned, when the -+declaration does not use either @code{signed} or @code{unsigned}. By -+default, such a bit-field is signed, because this is consistent: the -+basic integer types such as @code{int} are signed types. -+@end table -+ -+@node C++ Dialect Options -+@section Options Controlling C++ Dialect -+ -+@cindex compiler options, C++ -+@cindex C++ options, command line -+@cindex options, C++ -+This section describes the command-line options that are only meaningful -+for C++ programs; but you can also use most of the GNU compiler options -+regardless of what language your program is in. For example, you -+might compile a file @code{firstClass.C} like this: -+ -+@smallexample -+g++ -g -frepo -O -c firstClass.C -+@end smallexample -+ -+@noindent -+In this example, only @option{-frepo} is an option meant -+only for C++ programs; you can use the other options with any -+language supported by GCC@. -+ -+Here is a list of options that are @emph{only} for compiling C++ programs: -+ -+@table @gcctabopt -+ -+@item -fabi-version=@var{n} -+@opindex fabi-version -+Use version @var{n} of the C++ ABI@. Version 2 is the version of the -+C++ ABI that first appeared in G++ 3.4. Version 1 is the version of -+the C++ ABI that first appeared in G++ 3.2. Version 0 will always be -+the version that conforms most closely to the C++ ABI specification. -+Therefore, the ABI obtained using version 0 will change as ABI bugs -+are fixed. -+ -+The default is version 2. -+ -+@item -fno-access-control -+@opindex fno-access-control -+Turn off all access checking. This switch is mainly useful for working -+around bugs in the access control code. -+ -+@item -fcheck-new -+@opindex fcheck-new -+Check that the pointer returned by @code{operator new} is non-null -+before attempting to modify the storage allocated. This check is -+normally unnecessary because the C++ standard specifies that -+@code{operator new} will only return @code{0} if it is declared -+@samp{throw()}, in which case the compiler will always check the -+return value even without this option. In all other cases, when -+@code{operator new} has a non-empty exception specification, memory -+exhaustion is signalled by throwing @code{std::bad_alloc}. See also -+@samp{new (nothrow)}. -+ -+@item -fconserve-space -+@opindex fconserve-space -+Put uninitialized or runtime-initialized global variables into the -+common segment, as C does. This saves space in the executable at the -+cost of not diagnosing duplicate definitions. If you compile with this -+flag and your program mysteriously crashes after @code{main()} has -+completed, you may have an object that is being destroyed twice because -+two definitions were merged. -+ -+This option is no longer useful on most targets, now that support has -+been added for putting variables into BSS without making them common. -+ -+@item -fno-deduce-init-list -+@opindex fno-deduce-init-list -+Disable deduction of a template type parameter as -+std::initializer_list from a brace-enclosed initializer list, i.e. -+ -+@smallexample -+template <class T> auto forward(T t) -> decltype (realfn (t)) -+@{ -+ return realfn (t); -+@} -+ -+void f() -+@{ -+ forward(@{1,2@}); // call forward<std::initializer_list<int>> -+@} -+@end smallexample -+ -+This option is present because this deduction is an extension to the -+current specification in the C++0x working draft, and there was -+some concern about potential overload resolution problems. -+ -+@item -ffriend-injection -+@opindex ffriend-injection -+Inject friend functions into the enclosing namespace, so that they are -+visible outside the scope of the class in which they are declared. -+Friend functions were documented to work this way in the old Annotated -+C++ Reference Manual, and versions of G++ before 4.1 always worked -+that way. However, in ISO C++ a friend function which is not declared -+in an enclosing scope can only be found using argument dependent -+lookup. This option causes friends to be injected as they were in -+earlier releases. -+ -+This option is for compatibility, and may be removed in a future -+release of G++. -+ -+@item -fno-elide-constructors -+@opindex fno-elide-constructors -+The C++ standard allows an implementation to omit creating a temporary -+which is only used to initialize another object of the same type. -+Specifying this option disables that optimization, and forces G++ to -+call the copy constructor in all cases. -+ -+@item -fno-enforce-eh-specs -+@opindex fno-enforce-eh-specs -+Don't generate code to check for violation of exception specifications -+at runtime. This option violates the C++ standard, but may be useful -+for reducing code size in production builds, much like defining -+@samp{NDEBUG}. This does not give user code permission to throw -+exceptions in violation of the exception specifications; the compiler -+will still optimize based on the specifications, so throwing an -+unexpected exception will result in undefined behavior. -+ -+@item -ffor-scope -+@itemx -fno-for-scope -+@opindex ffor-scope -+@opindex fno-for-scope -+If @option{-ffor-scope} is specified, the scope of variables declared in -+a @i{for-init-statement} is limited to the @samp{for} loop itself, -+as specified by the C++ standard. -+If @option{-fno-for-scope} is specified, the scope of variables declared in -+a @i{for-init-statement} extends to the end of the enclosing scope, -+as was the case in old versions of G++, and other (traditional) -+implementations of C++. -+ -+The default if neither flag is given to follow the standard, -+but to allow and give a warning for old-style code that would -+otherwise be invalid, or have different behavior. -+ -+@item -fno-gnu-keywords -+@opindex fno-gnu-keywords -+Do not recognize @code{typeof} as a keyword, so that code can use this -+word as an identifier. You can use the keyword @code{__typeof__} instead. -+@option{-ansi} implies @option{-fno-gnu-keywords}. -+ -+@item -fno-implicit-templates -+@opindex fno-implicit-templates -+Never emit code for non-inline templates which are instantiated -+implicitly (i.e.@: by use); only emit code for explicit instantiations. -+@xref{Template Instantiation}, for more information. -+ -+@item -fno-implicit-inline-templates -+@opindex fno-implicit-inline-templates -+Don't emit code for implicit instantiations of inline templates, either. -+The default is to handle inlines differently so that compiles with and -+without optimization will need the same set of explicit instantiations. -+ -+@item -fno-implement-inlines -+@opindex fno-implement-inlines -+To save space, do not emit out-of-line copies of inline functions -+controlled by @samp{#pragma implementation}. This will cause linker -+errors if these functions are not inlined everywhere they are called. -+ -+@item -fms-extensions -+@opindex fms-extensions -+Disable pedantic warnings about constructs used in MFC, such as implicit -+int and getting a pointer to member function via non-standard syntax. -+ -+@item -fno-nonansi-builtins -+@opindex fno-nonansi-builtins -+Disable built-in declarations of functions that are not mandated by -+ANSI/ISO C@. These include @code{ffs}, @code{alloca}, @code{_exit}, -+@code{index}, @code{bzero}, @code{conjf}, and other related functions. -+ -+@item -fno-operator-names -+@opindex fno-operator-names -+Do not treat the operator name keywords @code{and}, @code{bitand}, -+@code{bitor}, @code{compl}, @code{not}, @code{or} and @code{xor} as -+synonyms as keywords. -+ -+@item -fno-optional-diags -+@opindex fno-optional-diags -+Disable diagnostics that the standard says a compiler does not need to -+issue. Currently, the only such diagnostic issued by G++ is the one for -+a name having multiple meanings within a class. -+ -+@item -fpermissive -+@opindex fpermissive -+Downgrade some diagnostics about nonconformant code from errors to -+warnings. Thus, using @option{-fpermissive} will allow some -+nonconforming code to compile. -+ -+@item -frepo -+@opindex frepo -+Enable automatic template instantiation at link time. This option also -+implies @option{-fno-implicit-templates}. @xref{Template -+Instantiation}, for more information. -+ -+@item -fno-rtti -+@opindex fno-rtti -+Disable generation of information about every class with virtual -+functions for use by the C++ runtime type identification features -+(@samp{dynamic_cast} and @samp{typeid}). If you don't use those parts -+of the language, you can save some space by using this flag. Note that -+exception handling uses the same information, but it will generate it as -+needed. The @samp{dynamic_cast} operator can still be used for casts that -+do not require runtime type information, i.e.@: casts to @code{void *} or to -+unambiguous base classes. -+ -+@item -fstats -+@opindex fstats -+Emit statistics about front-end processing at the end of the compilation. -+This information is generally only useful to the G++ development team. -+ -+@item -ftemplate-depth-@var{n} -+@opindex ftemplate-depth -+Set the maximum instantiation depth for template classes to @var{n}. -+A limit on the template instantiation depth is needed to detect -+endless recursions during template class instantiation. ANSI/ISO C++ -+conforming programs must not rely on a maximum depth greater than 17. -+ -+@item -fno-threadsafe-statics -+@opindex fno-threadsafe-statics -+Do not emit the extra code to use the routines specified in the C++ -+ABI for thread-safe initialization of local statics. You can use this -+option to reduce code size slightly in code that doesn't need to be -+thread-safe. -+ -+@item -fuse-cxa-atexit -+@opindex fuse-cxa-atexit -+Register destructors for objects with static storage duration with the -+@code{__cxa_atexit} function rather than the @code{atexit} function. -+This option is required for fully standards-compliant handling of static -+destructors, but will only work if your C library supports -+@code{__cxa_atexit}. -+ -+@item -fno-use-cxa-get-exception-ptr -+@opindex fno-use-cxa-get-exception-ptr -+Don't use the @code{__cxa_get_exception_ptr} runtime routine. This -+will cause @code{std::uncaught_exception} to be incorrect, but is necessary -+if the runtime routine is not available. -+ -+@item -fvisibility-inlines-hidden -+@opindex fvisibility-inlines-hidden -+This switch declares that the user does not attempt to compare -+pointers to inline methods where the addresses of the two functions -+were taken in different shared objects. -+ -+The effect of this is that GCC may, effectively, mark inline methods with -+@code{__attribute__ ((visibility ("hidden")))} so that they do not -+appear in the export table of a DSO and do not require a PLT indirection -+when used within the DSO@. Enabling this option can have a dramatic effect -+on load and link times of a DSO as it massively reduces the size of the -+dynamic export table when the library makes heavy use of templates. -+ -+The behavior of this switch is not quite the same as marking the -+methods as hidden directly, because it does not affect static variables -+local to the function or cause the compiler to deduce that -+the function is defined in only one shared object. -+ -+You may mark a method as having a visibility explicitly to negate the -+effect of the switch for that method. For example, if you do want to -+compare pointers to a particular inline method, you might mark it as -+having default visibility. Marking the enclosing class with explicit -+visibility will have no effect. -+ -+Explicitly instantiated inline methods are unaffected by this option -+as their linkage might otherwise cross a shared library boundary. -+@xref{Template Instantiation}. -+ -+@item -fvisibility-ms-compat -+@opindex fvisibility-ms-compat -+This flag attempts to use visibility settings to make GCC's C++ -+linkage model compatible with that of Microsoft Visual Studio. -+ -+The flag makes these changes to GCC's linkage model: -+ -+@enumerate -+@item -+It sets the default visibility to @code{hidden}, like -+@option{-fvisibility=hidden}. -+ -+@item -+Types, but not their members, are not hidden by default. -+ -+@item -+The One Definition Rule is relaxed for types without explicit -+visibility specifications which are defined in more than one different -+shared object: those declarations are permitted if they would have -+been permitted when this option was not used. -+@end enumerate -+ -+In new code it is better to use @option{-fvisibility=hidden} and -+export those classes which are intended to be externally visible. -+Unfortunately it is possible for code to rely, perhaps accidentally, -+on the Visual Studio behavior. -+ -+Among the consequences of these changes are that static data members -+of the same type with the same name but defined in different shared -+objects will be different, so changing one will not change the other; -+and that pointers to function members defined in different shared -+objects may not compare equal. When this flag is given, it is a -+violation of the ODR to define types with the same name differently. -+ -+@item -fno-weak -+@opindex fno-weak -+Do not use weak symbol support, even if it is provided by the linker. -+By default, G++ will use weak symbols if they are available. This -+option exists only for testing, and should not be used by end-users; -+it will result in inferior code and has no benefits. This option may -+be removed in a future release of G++. -+ -+@item -nostdinc++ -+@opindex nostdinc++ -+Do not search for header files in the standard directories specific to -+C++, but do still search the other standard directories. (This option -+is used when building the C++ library.) -+@end table -+ -+In addition, these optimization, warning, and code generation options -+have meanings only for C++ programs: -+ -+@table @gcctabopt -+@item -fno-default-inline -+@opindex fno-default-inline -+Do not assume @samp{inline} for functions defined inside a class scope. -+@xref{Optimize Options,,Options That Control Optimization}. Note that these -+functions will have linkage like inline functions; they just won't be -+inlined by default. -+ -+@item -Wabi @r{(C, Objective-C, C++ and Objective-C++ only)} -+@opindex Wabi -+@opindex Wno-abi -+Warn when G++ generates code that is probably not compatible with the -+vendor-neutral C++ ABI@. Although an effort has been made to warn about -+all such cases, there are probably some cases that are not warned about, -+even though G++ is generating incompatible code. There may also be -+cases where warnings are emitted even though the code that is generated -+will be compatible. -+ -+You should rewrite your code to avoid these warnings if you are -+concerned about the fact that code generated by G++ may not be binary -+compatible with code generated by other compilers. -+ -+The known incompatibilities at this point include: -+ -+@itemize @bullet -+ -+@item -+Incorrect handling of tail-padding for bit-fields. G++ may attempt to -+pack data into the same byte as a base class. For example: -+ -+@smallexample -+struct A @{ virtual void f(); int f1 : 1; @}; -+struct B : public A @{ int f2 : 1; @}; -+@end smallexample -+ -+@noindent -+In this case, G++ will place @code{B::f2} into the same byte -+as@code{A::f1}; other compilers will not. You can avoid this problem -+by explicitly padding @code{A} so that its size is a multiple of the -+byte size on your platform; that will cause G++ and other compilers to -+layout @code{B} identically. -+ -+@item -+Incorrect handling of tail-padding for virtual bases. G++ does not use -+tail padding when laying out virtual bases. For example: -+ -+@smallexample -+struct A @{ virtual void f(); char c1; @}; -+struct B @{ B(); char c2; @}; -+struct C : public A, public virtual B @{@}; -+@end smallexample -+ -+@noindent -+In this case, G++ will not place @code{B} into the tail-padding for -+@code{A}; other compilers will. You can avoid this problem by -+explicitly padding @code{A} so that its size is a multiple of its -+alignment (ignoring virtual base classes); that will cause G++ and other -+compilers to layout @code{C} identically. -+ -+@item -+Incorrect handling of bit-fields with declared widths greater than that -+of their underlying types, when the bit-fields appear in a union. For -+example: -+ -+@smallexample -+union U @{ int i : 4096; @}; -+@end smallexample -+ -+@noindent -+Assuming that an @code{int} does not have 4096 bits, G++ will make the -+union too small by the number of bits in an @code{int}. -+ -+@item -+Empty classes can be placed at incorrect offsets. For example: -+ -+@smallexample -+struct A @{@}; -+ -+struct B @{ -+ A a; -+ virtual void f (); -+@}; -+ -+struct C : public B, public A @{@}; -+@end smallexample -+ -+@noindent -+G++ will place the @code{A} base class of @code{C} at a nonzero offset; -+it should be placed at offset zero. G++ mistakenly believes that the -+@code{A} data member of @code{B} is already at offset zero. -+ -+@item -+Names of template functions whose types involve @code{typename} or -+template template parameters can be mangled incorrectly. -+ -+@smallexample -+template <typename Q> -+void f(typename Q::X) @{@} -+ -+template <template <typename> class Q> -+void f(typename Q<int>::X) @{@} -+@end smallexample -+ -+@noindent -+Instantiations of these templates may be mangled incorrectly. -+ -+@end itemize -+ -+It also warns psABI related changes. The known psABI changes at this -+point include: -+ -+@itemize @bullet -+ -+@item -+For SYSV/x86-64, when passing union with long double, it is changed to -+pass in memory as specified in psABI. For example: -+ -+@smallexample -+union U @{ -+ long double ld; -+ int i; -+@}; -+@end smallexample -+ -+@noindent -+@code{union U} will always be passed in memory. -+ -+@end itemize -+ -+@item -Wctor-dtor-privacy @r{(C++ and Objective-C++ only)} -+@opindex Wctor-dtor-privacy -+@opindex Wno-ctor-dtor-privacy -+Warn when a class seems unusable because all the constructors or -+destructors in that class are private, and it has neither friends nor -+public static member functions. -+ -+@item -Wnon-virtual-dtor @r{(C++ and Objective-C++ only)} -+@opindex Wnon-virtual-dtor -+@opindex Wno-non-virtual-dtor -+Warn when a class has virtual functions and accessible non-virtual -+destructor, in which case it would be possible but unsafe to delete -+an instance of a derived class through a pointer to the base class. -+This warning is also enabled if -Weffc++ is specified. -+ -+@item -Wreorder @r{(C++ and Objective-C++ only)} -+@opindex Wreorder -+@opindex Wno-reorder -+@cindex reordering, warning -+@cindex warning for reordering of member initializers -+Warn when the order of member initializers given in the code does not -+match the order in which they must be executed. For instance: -+ -+@smallexample -+struct A @{ -+ int i; -+ int j; -+ A(): j (0), i (1) @{ @} -+@}; -+@end smallexample -+ -+The compiler will rearrange the member initializers for @samp{i} -+and @samp{j} to match the declaration order of the members, emitting -+a warning to that effect. This warning is enabled by @option{-Wall}. -+@end table -+ -+The following @option{-W@dots{}} options are not affected by @option{-Wall}. -+ -+@table @gcctabopt -+@item -Weffc++ @r{(C++ and Objective-C++ only)} -+@opindex Weffc++ -+@opindex Wno-effc++ -+Warn about violations of the following style guidelines from Scott Meyers' -+@cite{Effective C++} book: -+ -+@itemize @bullet -+@item -+Item 11: Define a copy constructor and an assignment operator for classes -+with dynamically allocated memory. -+ -+@item -+Item 12: Prefer initialization to assignment in constructors. -+ -+@item -+Item 14: Make destructors virtual in base classes. -+ -+@item -+Item 15: Have @code{operator=} return a reference to @code{*this}. -+ -+@item -+Item 23: Don't try to return a reference when you must return an object. -+ -+@end itemize -+ -+Also warn about violations of the following style guidelines from -+Scott Meyers' @cite{More Effective C++} book: -+ -+@itemize @bullet -+@item -+Item 6: Distinguish between prefix and postfix forms of increment and -+decrement operators. -+ -+@item -+Item 7: Never overload @code{&&}, @code{||}, or @code{,}. -+ -+@end itemize -+ -+When selecting this option, be aware that the standard library -+headers do not obey all of these guidelines; use @samp{grep -v} -+to filter out those warnings. -+ -+@item -Wstrict-null-sentinel @r{(C++ and Objective-C++ only)} -+@opindex Wstrict-null-sentinel -+@opindex Wno-strict-null-sentinel -+Warn also about the use of an uncasted @code{NULL} as sentinel. When -+compiling only with GCC this is a valid sentinel, as @code{NULL} is defined -+to @code{__null}. Although it is a null pointer constant not a null pointer, -+it is guaranteed to be of the same size as a pointer. But this use is -+not portable across different compilers. -+ -+@item -Wno-non-template-friend @r{(C++ and Objective-C++ only)} -+@opindex Wno-non-template-friend -+@opindex Wnon-template-friend -+Disable warnings when non-templatized friend functions are declared -+within a template. Since the advent of explicit template specification -+support in G++, if the name of the friend is an unqualified-id (i.e., -+@samp{friend foo(int)}), the C++ language specification demands that the -+friend declare or define an ordinary, nontemplate function. (Section -+14.5.3). Before G++ implemented explicit specification, unqualified-ids -+could be interpreted as a particular specialization of a templatized -+function. Because this non-conforming behavior is no longer the default -+behavior for G++, @option{-Wnon-template-friend} allows the compiler to -+check existing code for potential trouble spots and is on by default. -+This new compiler behavior can be turned off with -+@option{-Wno-non-template-friend} which keeps the conformant compiler code -+but disables the helpful warning. -+ -+@item -Wold-style-cast @r{(C++ and Objective-C++ only)} -+@opindex Wold-style-cast -+@opindex Wno-old-style-cast -+Warn if an old-style (C-style) cast to a non-void type is used within -+a C++ program. The new-style casts (@samp{dynamic_cast}, -+@samp{static_cast}, @samp{reinterpret_cast}, and @samp{const_cast}) are -+less vulnerable to unintended effects and much easier to search for. -+ -+@item -Woverloaded-virtual @r{(C++ and Objective-C++ only)} -+@opindex Woverloaded-virtual -+@opindex Wno-overloaded-virtual -+@cindex overloaded virtual fn, warning -+@cindex warning for overloaded virtual fn -+Warn when a function declaration hides virtual functions from a -+base class. For example, in: -+ -+@smallexample -+struct A @{ -+ virtual void f(); -+@}; -+ -+struct B: public A @{ -+ void f(int); -+@}; -+@end smallexample -+ -+the @code{A} class version of @code{f} is hidden in @code{B}, and code -+like: -+ -+@smallexample -+B* b; -+b->f(); -+@end smallexample -+ -+will fail to compile. -+ -+@item -Wno-pmf-conversions @r{(C++ and Objective-C++ only)} -+@opindex Wno-pmf-conversions -+@opindex Wpmf-conversions -+Disable the diagnostic for converting a bound pointer to member function -+to a plain pointer. -+ -+@item -Wsign-promo @r{(C++ and Objective-C++ only)} -+@opindex Wsign-promo -+@opindex Wno-sign-promo -+Warn when overload resolution chooses a promotion from unsigned or -+enumerated type to a signed type, over a conversion to an unsigned type of -+the same size. Previous versions of G++ would try to preserve -+unsignedness, but the standard mandates the current behavior. -+ -+@smallexample -+struct A @{ -+ operator int (); -+ A& operator = (int); -+@}; -+ -+main () -+@{ -+ A a,b; -+ a = b; -+@} -+@end smallexample -+ -+In this example, G++ will synthesize a default @samp{A& operator = -+(const A&);}, while cfront will use the user-defined @samp{operator =}. -+@end table -+ -+@node Objective-C and Objective-C++ Dialect Options -+@section Options Controlling Objective-C and Objective-C++ Dialects -+ -+@cindex compiler options, Objective-C and Objective-C++ -+@cindex Objective-C and Objective-C++ options, command line -+@cindex options, Objective-C and Objective-C++ -+(NOTE: This manual does not describe the Objective-C and Objective-C++ -+languages themselves. See @xref{Standards,,Language Standards -+Supported by GCC}, for references.) -+ -+This section describes the command-line options that are only meaningful -+for Objective-C and Objective-C++ programs, but you can also use most of -+the language-independent GNU compiler options. -+For example, you might compile a file @code{some_class.m} like this: -+ -+@smallexample -+gcc -g -fgnu-runtime -O -c some_class.m -+@end smallexample -+ -+@noindent -+In this example, @option{-fgnu-runtime} is an option meant only for -+Objective-C and Objective-C++ programs; you can use the other options with -+any language supported by GCC@. -+ -+Note that since Objective-C is an extension of the C language, Objective-C -+compilations may also use options specific to the C front-end (e.g., -+@option{-Wtraditional}). Similarly, Objective-C++ compilations may use -+C++-specific options (e.g., @option{-Wabi}). -+ -+Here is a list of options that are @emph{only} for compiling Objective-C -+and Objective-C++ programs: -+ -+@table @gcctabopt -+@item -fconstant-string-class=@var{class-name} -+@opindex fconstant-string-class -+Use @var{class-name} as the name of the class to instantiate for each -+literal string specified with the syntax @code{@@"@dots{}"}. The default -+class name is @code{NXConstantString} if the GNU runtime is being used, and -+@code{NSConstantString} if the NeXT runtime is being used (see below). The -+@option{-fconstant-cfstrings} option, if also present, will override the -+@option{-fconstant-string-class} setting and cause @code{@@"@dots{}"} literals -+to be laid out as constant CoreFoundation strings. -+ -+@item -fgnu-runtime -+@opindex fgnu-runtime -+Generate object code compatible with the standard GNU Objective-C -+runtime. This is the default for most types of systems. -+ -+@item -fnext-runtime -+@opindex fnext-runtime -+Generate output compatible with the NeXT runtime. This is the default -+for NeXT-based systems, including Darwin and Mac OS X@. The macro -+@code{__NEXT_RUNTIME__} is predefined if (and only if) this option is -+used. -+ -+@item -fno-nil-receivers -+@opindex fno-nil-receivers -+Assume that all Objective-C message dispatches (e.g., -+@code{[receiver message:arg]}) in this translation unit ensure that the receiver -+is not @code{nil}. This allows for more efficient entry points in the runtime -+to be used. Currently, this option is only available in conjunction with -+the NeXT runtime on Mac OS X 10.3 and later. -+ -+@item -fobjc-call-cxx-cdtors -+@opindex fobjc-call-cxx-cdtors -+For each Objective-C class, check if any of its instance variables is a -+C++ object with a non-trivial default constructor. If so, synthesize a -+special @code{- (id) .cxx_construct} instance method that will run -+non-trivial default constructors on any such instance variables, in order, -+and then return @code{self}. Similarly, check if any instance variable -+is a C++ object with a non-trivial destructor, and if so, synthesize a -+special @code{- (void) .cxx_destruct} method that will run -+all such default destructors, in reverse order. -+ -+The @code{- (id) .cxx_construct} and/or @code{- (void) .cxx_destruct} methods -+thusly generated will only operate on instance variables declared in the -+current Objective-C class, and not those inherited from superclasses. It -+is the responsibility of the Objective-C runtime to invoke all such methods -+in an object's inheritance hierarchy. The @code{- (id) .cxx_construct} methods -+will be invoked by the runtime immediately after a new object -+instance is allocated; the @code{- (void) .cxx_destruct} methods will -+be invoked immediately before the runtime deallocates an object instance. -+ -+As of this writing, only the NeXT runtime on Mac OS X 10.4 and later has -+support for invoking the @code{- (id) .cxx_construct} and -+@code{- (void) .cxx_destruct} methods. -+ -+@item -fobjc-direct-dispatch -+@opindex fobjc-direct-dispatch -+Allow fast jumps to the message dispatcher. On Darwin this is -+accomplished via the comm page. -+ -+@item -fobjc-exceptions -+@opindex fobjc-exceptions -+Enable syntactic support for structured exception handling in Objective-C, -+similar to what is offered by C++ and Java. This option is -+unavailable in conjunction with the NeXT runtime on Mac OS X 10.2 and -+earlier. -+ -+@smallexample -+ @@try @{ -+ @dots{} -+ @@throw expr; -+ @dots{} -+ @} -+ @@catch (AnObjCClass *exc) @{ -+ @dots{} -+ @@throw expr; -+ @dots{} -+ @@throw; -+ @dots{} -+ @} -+ @@catch (AnotherClass *exc) @{ -+ @dots{} -+ @} -+ @@catch (id allOthers) @{ -+ @dots{} -+ @} -+ @@finally @{ -+ @dots{} -+ @@throw expr; -+ @dots{} -+ @} -+@end smallexample -+ -+The @code{@@throw} statement may appear anywhere in an Objective-C or -+Objective-C++ program; when used inside of a @code{@@catch} block, the -+@code{@@throw} may appear without an argument (as shown above), in which case -+the object caught by the @code{@@catch} will be rethrown. -+ -+Note that only (pointers to) Objective-C objects may be thrown and -+caught using this scheme. When an object is thrown, it will be caught -+by the nearest @code{@@catch} clause capable of handling objects of that type, -+analogously to how @code{catch} blocks work in C++ and Java. A -+@code{@@catch(id @dots{})} clause (as shown above) may also be provided to catch -+any and all Objective-C exceptions not caught by previous @code{@@catch} -+clauses (if any). -+ -+The @code{@@finally} clause, if present, will be executed upon exit from the -+immediately preceding @code{@@try @dots{} @@catch} section. This will happen -+regardless of whether any exceptions are thrown, caught or rethrown -+inside the @code{@@try @dots{} @@catch} section, analogously to the behavior -+of the @code{finally} clause in Java. -+ -+There are several caveats to using the new exception mechanism: -+ -+@itemize @bullet -+@item -+Although currently designed to be binary compatible with @code{NS_HANDLER}-style -+idioms provided by the @code{NSException} class, the new -+exceptions can only be used on Mac OS X 10.3 (Panther) and later -+systems, due to additional functionality needed in the (NeXT) Objective-C -+runtime. -+ -+@item -+As mentioned above, the new exceptions do not support handling -+types other than Objective-C objects. Furthermore, when used from -+Objective-C++, the Objective-C exception model does not interoperate with C++ -+exceptions at this time. This means you cannot @code{@@throw} an exception -+from Objective-C and @code{catch} it in C++, or vice versa -+(i.e., @code{throw @dots{} @@catch}). -+@end itemize -+ -+The @option{-fobjc-exceptions} switch also enables the use of synchronization -+blocks for thread-safe execution: -+ -+@smallexample -+ @@synchronized (ObjCClass *guard) @{ -+ @dots{} -+ @} -+@end smallexample -+ -+Upon entering the @code{@@synchronized} block, a thread of execution shall -+first check whether a lock has been placed on the corresponding @code{guard} -+object by another thread. If it has, the current thread shall wait until -+the other thread relinquishes its lock. Once @code{guard} becomes available, -+the current thread will place its own lock on it, execute the code contained in -+the @code{@@synchronized} block, and finally relinquish the lock (thereby -+making @code{guard} available to other threads). -+ -+Unlike Java, Objective-C does not allow for entire methods to be marked -+@code{@@synchronized}. Note that throwing exceptions out of -+@code{@@synchronized} blocks is allowed, and will cause the guarding object -+to be unlocked properly. -+ -+@item -fobjc-gc -+@opindex fobjc-gc -+Enable garbage collection (GC) in Objective-C and Objective-C++ programs. -+ -+@item -freplace-objc-classes -+@opindex freplace-objc-classes -+Emit a special marker instructing @command{ld(1)} not to statically link in -+the resulting object file, and allow @command{dyld(1)} to load it in at -+run time instead. This is used in conjunction with the Fix-and-Continue -+debugging mode, where the object file in question may be recompiled and -+dynamically reloaded in the course of program execution, without the need -+to restart the program itself. Currently, Fix-and-Continue functionality -+is only available in conjunction with the NeXT runtime on Mac OS X 10.3 -+and later. -+ -+@item -fzero-link -+@opindex fzero-link -+When compiling for the NeXT runtime, the compiler ordinarily replaces calls -+to @code{objc_getClass("@dots{}")} (when the name of the class is known at -+compile time) with static class references that get initialized at load time, -+which improves run-time performance. Specifying the @option{-fzero-link} flag -+suppresses this behavior and causes calls to @code{objc_getClass("@dots{}")} -+to be retained. This is useful in Zero-Link debugging mode, since it allows -+for individual class implementations to be modified during program execution. -+ -+@item -gen-decls -+@opindex gen-decls -+Dump interface declarations for all classes seen in the source file to a -+file named @file{@var{sourcename}.decl}. -+ -+@item -Wassign-intercept @r{(Objective-C and Objective-C++ only)} -+@opindex Wassign-intercept -+@opindex Wno-assign-intercept -+Warn whenever an Objective-C assignment is being intercepted by the -+garbage collector. -+ -+@item -Wno-protocol @r{(Objective-C and Objective-C++ only)} -+@opindex Wno-protocol -+@opindex Wprotocol -+If a class is declared to implement a protocol, a warning is issued for -+every method in the protocol that is not implemented by the class. The -+default behavior is to issue a warning for every method not explicitly -+implemented in the class, even if a method implementation is inherited -+from the superclass. If you use the @option{-Wno-protocol} option, then -+methods inherited from the superclass are considered to be implemented, -+and no warning is issued for them. -+ -+@item -Wselector @r{(Objective-C and Objective-C++ only)} -+@opindex Wselector -+@opindex Wno-selector -+Warn if multiple methods of different types for the same selector are -+found during compilation. The check is performed on the list of methods -+in the final stage of compilation. Additionally, a check is performed -+for each selector appearing in a @code{@@selector(@dots{})} -+expression, and a corresponding method for that selector has been found -+during compilation. Because these checks scan the method table only at -+the end of compilation, these warnings are not produced if the final -+stage of compilation is not reached, for example because an error is -+found during compilation, or because the @option{-fsyntax-only} option is -+being used. -+ -+@item -Wstrict-selector-match @r{(Objective-C and Objective-C++ only)} -+@opindex Wstrict-selector-match -+@opindex Wno-strict-selector-match -+Warn if multiple methods with differing argument and/or return types are -+found for a given selector when attempting to send a message using this -+selector to a receiver of type @code{id} or @code{Class}. When this flag -+is off (which is the default behavior), the compiler will omit such warnings -+if any differences found are confined to types which share the same size -+and alignment. -+ -+@item -Wundeclared-selector @r{(Objective-C and Objective-C++ only)} -+@opindex Wundeclared-selector -+@opindex Wno-undeclared-selector -+Warn if a @code{@@selector(@dots{})} expression referring to an -+undeclared selector is found. A selector is considered undeclared if no -+method with that name has been declared before the -+@code{@@selector(@dots{})} expression, either explicitly in an -+@code{@@interface} or @code{@@protocol} declaration, or implicitly in -+an @code{@@implementation} section. This option always performs its -+checks as soon as a @code{@@selector(@dots{})} expression is found, -+while @option{-Wselector} only performs its checks in the final stage of -+compilation. This also enforces the coding style convention -+that methods and selectors must be declared before being used. -+ -+@item -print-objc-runtime-info -+@opindex print-objc-runtime-info -+Generate C header describing the largest structure that is passed by -+value, if any. -+ -+@end table -+ -+@node Language Independent Options -+@section Options to Control Diagnostic Messages Formatting -+@cindex options to control diagnostics formatting -+@cindex diagnostic messages -+@cindex message formatting -+ -+Traditionally, diagnostic messages have been formatted irrespective of -+the output device's aspect (e.g.@: its width, @dots{}). The options described -+below can be used to control the diagnostic messages formatting -+algorithm, e.g.@: how many characters per line, how often source location -+information should be reported. Right now, only the C++ front end can -+honor these options. However it is expected, in the near future, that -+the remaining front ends would be able to digest them correctly. -+ -+@table @gcctabopt -+@item -fmessage-length=@var{n} -+@opindex fmessage-length -+Try to format error messages so that they fit on lines of about @var{n} -+characters. The default is 72 characters for @command{g++} and 0 for the rest of -+the front ends supported by GCC@. If @var{n} is zero, then no -+line-wrapping will be done; each error message will appear on a single -+line. -+ -+@opindex fdiagnostics-show-location -+@item -fdiagnostics-show-location=once -+Only meaningful in line-wrapping mode. Instructs the diagnostic messages -+reporter to emit @emph{once} source location information; that is, in -+case the message is too long to fit on a single physical line and has to -+be wrapped, the source location won't be emitted (as prefix) again, -+over and over, in subsequent continuation lines. This is the default -+behavior. -+ -+@item -fdiagnostics-show-location=every-line -+Only meaningful in line-wrapping mode. Instructs the diagnostic -+messages reporter to emit the same source location information (as -+prefix) for physical lines that result from the process of breaking -+a message which is too long to fit on a single line. -+ -+@item -fdiagnostics-show-option -+@opindex fdiagnostics-show-option -+This option instructs the diagnostic machinery to add text to each -+diagnostic emitted, which indicates which command line option directly -+controls that diagnostic, when such an option is known to the -+diagnostic machinery. -+ -+@item -Wcoverage-mismatch -+@opindex Wcoverage-mismatch -+Warn if feedback profiles do not match when using the -+@option{-fprofile-use} option. -+If a source file was changed between @option{-fprofile-gen} and -+@option{-fprofile-use}, the files with the profile feedback can fail -+to match the source file and GCC can not use the profile feedback -+information. By default, GCC emits an error message in this case. -+The option @option{-Wcoverage-mismatch} emits a warning instead of an -+error. GCC does not use appropriate feedback profiles, so using this -+option can result in poorly optimized code. This option is useful -+only in the case of very minor changes such as bug fixes to an -+existing code-base. -+ -+@end table -+ -+@node Warning Options -+@section Options to Request or Suppress Warnings -+@cindex options to control warnings -+@cindex warning messages -+@cindex messages, warning -+@cindex suppressing warnings -+ -+Warnings are diagnostic messages that report constructions which -+are not inherently erroneous but which are risky or suggest there -+may have been an error. -+ -+The following language-independent options do not enable specific -+warnings but control the kinds of diagnostics produced by GCC. -+ -+@table @gcctabopt -+@cindex syntax checking -+@item -fsyntax-only -+@opindex fsyntax-only -+Check the code for syntax errors, but don't do anything beyond that. -+ -+@item -w -+@opindex w -+Inhibit all warning messages. -+ -+@item -Werror -+@opindex Werror -+@opindex Wno-error -+Make all warnings into errors. -+ -+@item -Werror= -+@opindex Werror= -+@opindex Wno-error= -+Make the specified warning into an error. The specifier for a warning -+is appended, for example @option{-Werror=switch} turns the warnings -+controlled by @option{-Wswitch} into errors. This switch takes a -+negative form, to be used to negate @option{-Werror} for specific -+warnings, for example @option{-Wno-error=switch} makes -+@option{-Wswitch} warnings not be errors, even when @option{-Werror} -+is in effect. You can use the @option{-fdiagnostics-show-option} -+option to have each controllable warning amended with the option which -+controls it, to determine what to use with this option. -+ -+Note that specifying @option{-Werror=}@var{foo} automatically implies -+@option{-W}@var{foo}. However, @option{-Wno-error=}@var{foo} does not -+imply anything. -+ -+@item -Wfatal-errors -+@opindex Wfatal-errors -+@opindex Wno-fatal-errors -+This option causes the compiler to abort compilation on the first error -+occurred rather than trying to keep going and printing further error -+messages. -+ -+@end table -+ -+You can request many specific warnings with options beginning -+@samp{-W}, for example @option{-Wimplicit} to request warnings on -+implicit declarations. Each of these specific warning options also -+has a negative form beginning @samp{-Wno-} to turn off warnings; for -+example, @option{-Wno-implicit}. This manual lists only one of the -+two forms, whichever is not the default. For further, -+language-specific options also refer to @ref{C++ Dialect Options} and -+@ref{Objective-C and Objective-C++ Dialect Options}. -+ -+@table @gcctabopt -+@item -pedantic -+@opindex pedantic -+Issue all the warnings demanded by strict ISO C and ISO C++; -+reject all programs that use forbidden extensions, and some other -+programs that do not follow ISO C and ISO C++. For ISO C, follows the -+version of the ISO C standard specified by any @option{-std} option used. -+ -+Valid ISO C and ISO C++ programs should compile properly with or without -+this option (though a rare few will require @option{-ansi} or a -+@option{-std} option specifying the required version of ISO C)@. However, -+without this option, certain GNU extensions and traditional C and C++ -+features are supported as well. With this option, they are rejected. -+ -+@option{-pedantic} does not cause warning messages for use of the -+alternate keywords whose names begin and end with @samp{__}. Pedantic -+warnings are also disabled in the expression that follows -+@code{__extension__}. However, only system header files should use -+these escape routes; application programs should avoid them. -+@xref{Alternate Keywords}. -+ -+Some users try to use @option{-pedantic} to check programs for strict ISO -+C conformance. They soon find that it does not do quite what they want: -+it finds some non-ISO practices, but not all---only those for which -+ISO C @emph{requires} a diagnostic, and some others for which -+diagnostics have been added. -+ -+A feature to report any failure to conform to ISO C might be useful in -+some instances, but would require considerable additional work and would -+be quite different from @option{-pedantic}. We don't have plans to -+support such a feature in the near future. -+ -+Where the standard specified with @option{-std} represents a GNU -+extended dialect of C, such as @samp{gnu89} or @samp{gnu99}, there is a -+corresponding @dfn{base standard}, the version of ISO C on which the GNU -+extended dialect is based. Warnings from @option{-pedantic} are given -+where they are required by the base standard. (It would not make sense -+for such warnings to be given only for features not in the specified GNU -+C dialect, since by definition the GNU dialects of C include all -+features the compiler supports with the given option, and there would be -+nothing to warn about.) -+ -+@item -pedantic-errors -+@opindex pedantic-errors -+Like @option{-pedantic}, except that errors are produced rather than -+warnings. -+ -+@item -Wall -+@opindex Wall -+@opindex Wno-all -+This enables all the warnings about constructions that some users -+consider questionable, and that are easy to avoid (or modify to -+prevent the warning), even in conjunction with macros. This also -+enables some language-specific warnings described in @ref{C++ Dialect -+Options} and @ref{Objective-C and Objective-C++ Dialect Options}. -+ -+@option{-Wall} turns on the following warning flags: -+ -+@gccoptlist{-Waddress @gol -+-Warray-bounds @r{(only with} @option{-O2}@r{)} @gol -+-Wc++0x-compat @gol -+-Wchar-subscripts @gol -+-Wimplicit-int @gol -+-Wimplicit-function-declaration @gol -+-Wcomment @gol -+-Wformat @gol -+-Wmain @r{(only for C/ObjC and unless} @option{-ffreestanding}@r{)} @gol -+-Wmissing-braces @gol -+-Wnonnull @gol -+-Wparentheses @gol -+-Wpointer-sign @gol -+-Wreorder @gol -+-Wreturn-type @gol -+-Wsequence-point @gol -+-Wsign-compare @r{(only in C++)} @gol -+-Wstrict-aliasing @gol -+-Wstrict-overflow=1 @gol -+-Wswitch @gol -+-Wtrigraphs @gol -+-Wuninitialized @gol -+-Wunknown-pragmas @gol -+-Wunused-function @gol -+-Wunused-label @gol -+-Wunused-value @gol -+-Wunused-variable @gol -+-Wvolatile-register-var @gol -+} -+ -+Note that some warning flags are not implied by @option{-Wall}. Some of -+them warn about constructions that users generally do not consider -+questionable, but which occasionally you might wish to check for; -+others warn about constructions that are necessary or hard to avoid in -+some cases, and there is no simple way to modify the code to suppress -+the warning. Some of them are enabled by @option{-Wextra} but many of -+them must be enabled individually. -+ -+@item -Wextra -+@opindex W -+@opindex Wextra -+@opindex Wno-extra -+This enables some extra warning flags that are not enabled by -+@option{-Wall}. (This option used to be called @option{-W}. The older -+name is still supported, but the newer name is more descriptive.) -+ -+@gccoptlist{-Wclobbered @gol -+-Wempty-body @gol -+-Wignored-qualifiers @gol -+-Wmissing-field-initializers @gol -+-Wmissing-parameter-type @r{(C only)} @gol -+-Wold-style-declaration @r{(C only)} @gol -+-Woverride-init @gol -+-Wsign-compare @gol -+-Wtype-limits @gol -+-Wuninitialized @gol -+-Wunused-parameter @r{(only with} @option{-Wunused} @r{or} @option{-Wall}@r{)} @gol -+} -+ -+The option @option{-Wextra} also prints warning messages for the -+following cases: -+ -+@itemize @bullet -+ -+@item -+A pointer is compared against integer zero with @samp{<}, @samp{<=}, -+@samp{>}, or @samp{>=}. -+ -+@item -+(C++ only) An enumerator and a non-enumerator both appear in a -+conditional expression. -+ -+@item -+(C++ only) Ambiguous virtual bases. -+ -+@item -+(C++ only) Subscripting an array which has been declared @samp{register}. -+ -+@item -+(C++ only) Taking the address of a variable which has been declared -+@samp{register}. -+ -+@item -+(C++ only) A base class is not initialized in a derived class' copy -+constructor. -+ -+@end itemize -+ -+@item -Wchar-subscripts -+@opindex Wchar-subscripts -+@opindex Wno-char-subscripts -+Warn if an array subscript has type @code{char}. This is a common cause -+of error, as programmers often forget that this type is signed on some -+machines. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wcomment -+@opindex Wcomment -+@opindex Wno-comment -+Warn whenever a comment-start sequence @samp{/*} appears in a @samp{/*} -+comment, or whenever a Backslash-Newline appears in a @samp{//} comment. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wformat -+@opindex Wformat -+@opindex Wno-format -+@opindex ffreestanding -+@opindex fno-builtin -+Check calls to @code{printf} and @code{scanf}, etc., to make sure that -+the arguments supplied have types appropriate to the format string -+specified, and that the conversions specified in the format string make -+sense. This includes standard functions, and others specified by format -+attributes (@pxref{Function Attributes}), in the @code{printf}, -+@code{scanf}, @code{strftime} and @code{strfmon} (an X/Open extension, -+not in the C standard) families (or other target-specific families). -+Which functions are checked without format attributes having been -+specified depends on the standard version selected, and such checks of -+functions without the attribute specified are disabled by -+@option{-ffreestanding} or @option{-fno-builtin}. -+ -+The formats are checked against the format features supported by GNU -+libc version 2.2. These include all ISO C90 and C99 features, as well -+as features from the Single Unix Specification and some BSD and GNU -+extensions. Other library implementations may not support all these -+features; GCC does not support warning about features that go beyond a -+particular library's limitations. However, if @option{-pedantic} is used -+with @option{-Wformat}, warnings will be given about format features not -+in the selected standard version (but not for @code{strfmon} formats, -+since those are not in any version of the C standard). @xref{C Dialect -+Options,,Options Controlling C Dialect}. -+ -+Since @option{-Wformat} also checks for null format arguments for -+several functions, @option{-Wformat} also implies @option{-Wnonnull}. -+ -+@option{-Wformat} is included in @option{-Wall}. For more control over some -+aspects of format checking, the options @option{-Wformat-y2k}, -+@option{-Wno-format-extra-args}, @option{-Wno-format-zero-length}, -+@option{-Wformat-nonliteral}, @option{-Wformat-security}, and -+@option{-Wformat=2} are available, but are not included in @option{-Wall}. -+ -+@item -Wformat-y2k -+@opindex Wformat-y2k -+@opindex Wno-format-y2k -+If @option{-Wformat} is specified, also warn about @code{strftime} -+formats which may yield only a two-digit year. -+ -+@item -Wno-format-contains-nul -+@opindex Wno-format-contains-nul -+@opindex Wformat-contains-nul -+If @option{-Wformat} is specified, do not warn about format strings that -+contain NUL bytes. -+ -+@item -Wno-format-extra-args -+@opindex Wno-format-extra-args -+@opindex Wformat-extra-args -+If @option{-Wformat} is specified, do not warn about excess arguments to a -+@code{printf} or @code{scanf} format function. The C standard specifies -+that such arguments are ignored. -+ -+Where the unused arguments lie between used arguments that are -+specified with @samp{$} operand number specifications, normally -+warnings are still given, since the implementation could not know what -+type to pass to @code{va_arg} to skip the unused arguments. However, -+in the case of @code{scanf} formats, this option will suppress the -+warning if the unused arguments are all pointers, since the Single -+Unix Specification says that such unused arguments are allowed. -+ -+@item -Wno-format-zero-length @r{(C and Objective-C only)} -+@opindex Wno-format-zero-length -+@opindex Wformat-zero-length -+If @option{-Wformat} is specified, do not warn about zero-length formats. -+The C standard specifies that zero-length formats are allowed. -+ -+@item -Wformat-nonliteral -+@opindex Wformat-nonliteral -+@opindex Wno-format-nonliteral -+If @option{-Wformat} is specified, also warn if the format string is not a -+string literal and so cannot be checked, unless the format function -+takes its format arguments as a @code{va_list}. -+ -+@item -Wformat-security -+@opindex Wformat-security -+@opindex Wno-format-security -+If @option{-Wformat} is specified, also warn about uses of format -+functions that represent possible security problems. At present, this -+warns about calls to @code{printf} and @code{scanf} functions where the -+format string is not a string literal and there are no format arguments, -+as in @code{printf (foo);}. This may be a security hole if the format -+string came from untrusted input and contains @samp{%n}. (This is -+currently a subset of what @option{-Wformat-nonliteral} warns about, but -+in future warnings may be added to @option{-Wformat-security} that are not -+included in @option{-Wformat-nonliteral}.) -+ -+@item -Wformat=2 -+@opindex Wformat=2 -+@opindex Wno-format=2 -+Enable @option{-Wformat} plus format checks not included in -+@option{-Wformat}. Currently equivalent to @samp{-Wformat -+-Wformat-nonliteral -Wformat-security -Wformat-y2k}. -+ -+@item -Wnonnull @r{(C and Objective-C only)} -+@opindex Wnonnull -+@opindex Wno-nonnull -+Warn about passing a null pointer for arguments marked as -+requiring a non-null value by the @code{nonnull} function attribute. -+ -+@option{-Wnonnull} is included in @option{-Wall} and @option{-Wformat}. It -+can be disabled with the @option{-Wno-nonnull} option. -+ -+@item -Winit-self @r{(C, C++, Objective-C and Objective-C++ only)} -+@opindex Winit-self -+@opindex Wno-init-self -+Warn about uninitialized variables which are initialized with themselves. -+Note this option can only be used with the @option{-Wuninitialized} option. -+ -+For example, GCC will warn about @code{i} being uninitialized in the -+following snippet only when @option{-Winit-self} has been specified: -+@smallexample -+@group -+int f() -+@{ -+ int i = i; -+ return i; -+@} -+@end group -+@end smallexample -+ -+@item -Wimplicit-int @r{(C and Objective-C only)} -+@opindex Wimplicit-int -+@opindex Wno-implicit-int -+Warn when a declaration does not specify a type. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wimplicit-function-declaration @r{(C and Objective-C only)} -+@opindex Wimplicit-function-declaration -+@opindex Wno-implicit-function-declaration -+Give a warning whenever a function is used before being declared. In -+C99 mode (@option{-std=c99} or @option{-std=gnu99}), this warning is -+enabled by default and it is made into an error by -+@option{-pedantic-errors}. This warning is also enabled by -+@option{-Wall}. -+ -+@item -Wimplicit -+@opindex Wimplicit -+@opindex Wno-implicit -+Same as @option{-Wimplicit-int} and @option{-Wimplicit-function-declaration}. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wignored-qualifiers @r{(C and C++ only)} -+@opindex Wignored-qualifiers -+@opindex Wno-ignored-qualifiers -+Warn if the return type of a function has a type qualifier -+such as @code{const}. For ISO C such a type qualifier has no effect, -+since the value returned by a function is not an lvalue. -+For C++, the warning is only emitted for scalar types or @code{void}. -+ISO C prohibits qualified @code{void} return types on function -+definitions, so such return types always receive a warning -+even without this option. -+ -+This warning is also enabled by @option{-Wextra}. -+ -+@item -Wmain -+@opindex Wmain -+@opindex Wno-main -+Warn if the type of @samp{main} is suspicious. @samp{main} should be -+a function with external linkage, returning int, taking either zero -+arguments, two, or three arguments of appropriate types. This warning -+is enabled by default in C++ and is enabled by either @option{-Wall} -+or @option{-pedantic}. -+ -+@item -Wmissing-braces -+@opindex Wmissing-braces -+@opindex Wno-missing-braces -+Warn if an aggregate or union initializer is not fully bracketed. In -+the following example, the initializer for @samp{a} is not fully -+bracketed, but that for @samp{b} is fully bracketed. -+ -+@smallexample -+int a[2][2] = @{ 0, 1, 2, 3 @}; -+int b[2][2] = @{ @{ 0, 1 @}, @{ 2, 3 @} @}; -+@end smallexample -+ -+This warning is enabled by @option{-Wall}. -+ -+@item -Wmissing-include-dirs @r{(C, C++, Objective-C and Objective-C++ only)} -+@opindex Wmissing-include-dirs -+@opindex Wno-missing-include-dirs -+Warn if a user-supplied include directory does not exist. -+ -+@item -Wparentheses -+@opindex Wparentheses -+@opindex Wno-parentheses -+Warn if parentheses are omitted in certain contexts, such -+as when there is an assignment in a context where a truth value -+is expected, or when operators are nested whose precedence people -+often get confused about. -+ -+Also warn if a comparison like @samp{x<=y<=z} appears; this is -+equivalent to @samp{(x<=y ? 1 : 0) <= z}, which is a different -+interpretation from that of ordinary mathematical notation. -+ -+Also warn about constructions where there may be confusion to which -+@code{if} statement an @code{else} branch belongs. Here is an example of -+such a case: -+ -+@smallexample -+@group -+@{ -+ if (a) -+ if (b) -+ foo (); -+ else -+ bar (); -+@} -+@end group -+@end smallexample -+ -+In C/C++, every @code{else} branch belongs to the innermost possible -+@code{if} statement, which in this example is @code{if (b)}. This is -+often not what the programmer expected, as illustrated in the above -+example by indentation the programmer chose. When there is the -+potential for this confusion, GCC will issue a warning when this flag -+is specified. To eliminate the warning, add explicit braces around -+the innermost @code{if} statement so there is no way the @code{else} -+could belong to the enclosing @code{if}. The resulting code would -+look like this: -+ -+@smallexample -+@group -+@{ -+ if (a) -+ @{ -+ if (b) -+ foo (); -+ else -+ bar (); -+ @} -+@} -+@end group -+@end smallexample -+ -+This warning is enabled by @option{-Wall}. -+ -+@item -Wsequence-point -+@opindex Wsequence-point -+@opindex Wno-sequence-point -+Warn about code that may have undefined semantics because of violations -+of sequence point rules in the C and C++ standards. -+ -+The C and C++ standards defines the order in which expressions in a C/C++ -+program are evaluated in terms of @dfn{sequence points}, which represent -+a partial ordering between the execution of parts of the program: those -+executed before the sequence point, and those executed after it. These -+occur after the evaluation of a full expression (one which is not part -+of a larger expression), after the evaluation of the first operand of a -+@code{&&}, @code{||}, @code{? :} or @code{,} (comma) operator, before a -+function is called (but after the evaluation of its arguments and the -+expression denoting the called function), and in certain other places. -+Other than as expressed by the sequence point rules, the order of -+evaluation of subexpressions of an expression is not specified. All -+these rules describe only a partial order rather than a total order, -+since, for example, if two functions are called within one expression -+with no sequence point between them, the order in which the functions -+are called is not specified. However, the standards committee have -+ruled that function calls do not overlap. -+ -+It is not specified when between sequence points modifications to the -+values of objects take effect. Programs whose behavior depends on this -+have undefined behavior; the C and C++ standards specify that ``Between -+the previous and next sequence point an object shall have its stored -+value modified at most once by the evaluation of an expression. -+Furthermore, the prior value shall be read only to determine the value -+to be stored.''. If a program breaks these rules, the results on any -+particular implementation are entirely unpredictable. -+ -+Examples of code with undefined behavior are @code{a = a++;}, @code{a[n] -+= b[n++]} and @code{a[i++] = i;}. Some more complicated cases are not -+diagnosed by this option, and it may give an occasional false positive -+result, but in general it has been found fairly effective at detecting -+this sort of problem in programs. -+ -+The standard is worded confusingly, therefore there is some debate -+over the precise meaning of the sequence point rules in subtle cases. -+Links to discussions of the problem, including proposed formal -+definitions, may be found on the GCC readings page, at -+@w{@uref{http://gcc.gnu.org/readings.html}}. -+ -+This warning is enabled by @option{-Wall} for C and C++. -+ -+@item -Wreturn-type -+@opindex Wreturn-type -+@opindex Wno-return-type -+Warn whenever a function is defined with a return-type that defaults -+to @code{int}. Also warn about any @code{return} statement with no -+return-value in a function whose return-type is not @code{void} -+(falling off the end of the function body is considered returning -+without a value), and about a @code{return} statement with a -+expression in a function whose return-type is @code{void}. -+ -+For C++, a function without return type always produces a diagnostic -+message, even when @option{-Wno-return-type} is specified. The only -+exceptions are @samp{main} and functions defined in system headers. -+ -+This warning is enabled by @option{-Wall}. -+ -+@item -Wswitch -+@opindex Wswitch -+@opindex Wno-switch -+Warn whenever a @code{switch} statement has an index of enumerated type -+and lacks a @code{case} for one or more of the named codes of that -+enumeration. (The presence of a @code{default} label prevents this -+warning.) @code{case} labels outside the enumeration range also -+provoke warnings when this option is used. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wswitch-default -+@opindex Wswitch-default -+@opindex Wno-switch-default -+Warn whenever a @code{switch} statement does not have a @code{default} -+case. -+ -+@item -Wswitch-enum -+@opindex Wswitch-enum -+@opindex Wno-switch-enum -+Warn whenever a @code{switch} statement has an index of enumerated type -+and lacks a @code{case} for one or more of the named codes of that -+enumeration. @code{case} labels outside the enumeration range also -+provoke warnings when this option is used. -+ -+@item -Wsync-nand @r{(C and C++ only)} -+@opindex Wsync-nand -+@opindex Wno-sync-nand -+Warn when @code{__sync_fetch_and_nand} and @code{__sync_nand_and_fetch} -+built-in functions are used. These functions changed semantics in GCC 4.4. -+ -+@item -Wtrigraphs -+@opindex Wtrigraphs -+@opindex Wno-trigraphs -+Warn if any trigraphs are encountered that might change the meaning of -+the program (trigraphs within comments are not warned about). -+This warning is enabled by @option{-Wall}. -+ -+@item -Wunused-function -+@opindex Wunused-function -+@opindex Wno-unused-function -+Warn whenever a static function is declared but not defined or a -+non-inline static function is unused. -+This warning is enabled by @option{-Wall}. -+ -+@item -Wunused-label -+@opindex Wunused-label -+@opindex Wno-unused-label -+Warn whenever a label is declared but not used. -+This warning is enabled by @option{-Wall}. -+ -+To suppress this warning use the @samp{unused} attribute -+(@pxref{Variable Attributes}). -+ -+@item -Wunused-parameter -+@opindex Wunused-parameter -+@opindex Wno-unused-parameter -+Warn whenever a function parameter is unused aside from its declaration. -+ -+To suppress this warning use the @samp{unused} attribute -+(@pxref{Variable Attributes}). -+ -+@item -Wunused-variable -+@opindex Wunused-variable -+@opindex Wno-unused-variable -+Warn whenever a local variable or non-constant static variable is unused -+aside from its declaration. -+This warning is enabled by @option{-Wall}. -+ -+To suppress this warning use the @samp{unused} attribute -+(@pxref{Variable Attributes}). -+ -+@item -Wunused-value -+@opindex Wunused-value -+@opindex Wno-unused-value -+Warn whenever a statement computes a result that is explicitly not -+used. To suppress this warning cast the unused expression to -+@samp{void}. This includes an expression-statement or the left-hand -+side of a comma expression that contains no side effects. For example, -+an expression such as @samp{x[i,j]} will cause a warning, while -+@samp{x[(void)i,j]} will not. -+ -+This warning is enabled by @option{-Wall}. -+ -+@item -Wunused -+@opindex Wunused -+@opindex Wno-unused -+All the above @option{-Wunused} options combined. -+ -+In order to get a warning about an unused function parameter, you must -+either specify @samp{-Wextra -Wunused} (note that @samp{-Wall} implies -+@samp{-Wunused}), or separately specify @option{-Wunused-parameter}. -+ -+@item -Wuninitialized -+@opindex Wuninitialized -+@opindex Wno-uninitialized -+Warn if an automatic variable is used without first being initialized -+or if a variable may be clobbered by a @code{setjmp} call. In C++, -+warn if a non-static reference or non-static @samp{const} member -+appears in a class without constructors. -+ -+If you want to warn about code which uses the uninitialized value of the -+variable in its own initializer, use the @option{-Winit-self} option. -+ -+These warnings occur for individual uninitialized or clobbered -+elements of structure, union or array variables as well as for -+variables which are uninitialized or clobbered as a whole. They do -+not occur for variables or elements declared @code{volatile}. Because -+these warnings depend on optimization, the exact variables or elements -+for which there are warnings will depend on the precise optimization -+options and version of GCC used. -+ -+Note that there may be no warning about a variable that is used only -+to compute a value that itself is never used, because such -+computations may be deleted by data flow analysis before the warnings -+are printed. -+ -+These warnings are made optional because GCC is not smart -+enough to see all the reasons why the code might be correct -+despite appearing to have an error. Here is one example of how -+this can happen: -+ -+@smallexample -+@group -+@{ -+ int x; -+ switch (y) -+ @{ -+ case 1: x = 1; -+ break; -+ case 2: x = 4; -+ break; -+ case 3: x = 5; -+ @} -+ foo (x); -+@} -+@end group -+@end smallexample -+ -+@noindent -+If the value of @code{y} is always 1, 2 or 3, then @code{x} is -+always initialized, but GCC doesn't know this. Here is -+another common case: -+ -+@smallexample -+@{ -+ int save_y; -+ if (change_y) save_y = y, y = new_y; -+ @dots{} -+ if (change_y) y = save_y; -+@} -+@end smallexample -+ -+@noindent -+This has no bug because @code{save_y} is used only if it is set. -+ -+@cindex @code{longjmp} warnings -+This option also warns when a non-volatile automatic variable might be -+changed by a call to @code{longjmp}. These warnings as well are possible -+only in optimizing compilation. -+ -+The compiler sees only the calls to @code{setjmp}. It cannot know -+where @code{longjmp} will be called; in fact, a signal handler could -+call it at any point in the code. As a result, you may get a warning -+even when there is in fact no problem because @code{longjmp} cannot -+in fact be called at the place which would cause a problem. -+ -+Some spurious warnings can be avoided if you declare all the functions -+you use that never return as @code{noreturn}. @xref{Function -+Attributes}. -+ -+This warning is enabled by @option{-Wall} or @option{-Wextra}. -+ -+@item -Wunknown-pragmas -+@opindex Wunknown-pragmas -+@opindex Wno-unknown-pragmas -+@cindex warning for unknown pragmas -+@cindex unknown pragmas, warning -+@cindex pragmas, warning of unknown -+Warn when a #pragma directive is encountered which is not understood by -+GCC@. If this command line option is used, warnings will even be issued -+for unknown pragmas in system header files. This is not the case if -+the warnings were only enabled by the @option{-Wall} command line option. -+ -+@item -Wno-pragmas -+@opindex Wno-pragmas -+@opindex Wpragmas -+Do not warn about misuses of pragmas, such as incorrect parameters, -+invalid syntax, or conflicts between pragmas. See also -+@samp{-Wunknown-pragmas}. -+ -+@item -Wstrict-aliasing -+@opindex Wstrict-aliasing -+@opindex Wno-strict-aliasing -+This option is only active when @option{-fstrict-aliasing} is active. -+It warns about code which might break the strict aliasing rules that the -+compiler is using for optimization. The warning does not catch all -+cases, but does attempt to catch the more common pitfalls. It is -+included in @option{-Wall}. -+It is equivalent to @option{-Wstrict-aliasing=3} -+ -+@item -Wstrict-aliasing=n -+@opindex Wstrict-aliasing=n -+@opindex Wno-strict-aliasing=n -+This option is only active when @option{-fstrict-aliasing} is active. -+It warns about code which might break the strict aliasing rules that the -+compiler is using for optimization. -+Higher levels correspond to higher accuracy (fewer false positives). -+Higher levels also correspond to more effort, similar to the way -O works. -+@option{-Wstrict-aliasing} is equivalent to @option{-Wstrict-aliasing=n}, -+with n=3. -+ -+Level 1: Most aggressive, quick, least accurate. -+Possibly useful when higher levels -+do not warn but -fstrict-aliasing still breaks the code, as it has very few -+false negatives. However, it has many false positives. -+Warns for all pointer conversions between possibly incompatible types, -+even if never dereferenced. Runs in the frontend only. -+ -+Level 2: Aggressive, quick, not too precise. -+May still have many false positives (not as many as level 1 though), -+and few false negatives (but possibly more than level 1). -+Unlike level 1, it only warns when an address is taken. Warns about -+incomplete types. Runs in the frontend only. -+ -+Level 3 (default for @option{-Wstrict-aliasing}): -+Should have very few false positives and few false -+negatives. Slightly slower than levels 1 or 2 when optimization is enabled. -+Takes care of the common punn+dereference pattern in the frontend: -+@code{*(int*)&some_float}. -+If optimization is enabled, it also runs in the backend, where it deals -+with multiple statement cases using flow-sensitive points-to information. -+Only warns when the converted pointer is dereferenced. -+Does not warn about incomplete types. -+ -+@item -Wstrict-overflow -+@itemx -Wstrict-overflow=@var{n} -+@opindex Wstrict-overflow -+@opindex Wno-strict-overflow -+This option is only active when @option{-fstrict-overflow} is active. -+It warns about cases where the compiler optimizes based on the -+assumption that signed overflow does not occur. Note that it does not -+warn about all cases where the code might overflow: it only warns -+about cases where the compiler implements some optimization. Thus -+this warning depends on the optimization level. -+ -+An optimization which assumes that signed overflow does not occur is -+perfectly safe if the values of the variables involved are such that -+overflow never does, in fact, occur. Therefore this warning can -+easily give a false positive: a warning about code which is not -+actually a problem. To help focus on important issues, several -+warning levels are defined. No warnings are issued for the use of -+undefined signed overflow when estimating how many iterations a loop -+will require, in particular when determining whether a loop will be -+executed at all. -+ -+@table @gcctabopt -+@item -Wstrict-overflow=1 -+Warn about cases which are both questionable and easy to avoid. For -+example: @code{x + 1 > x}; with @option{-fstrict-overflow}, the -+compiler will simplify this to @code{1}. This level of -+@option{-Wstrict-overflow} is enabled by @option{-Wall}; higher levels -+are not, and must be explicitly requested. -+ -+@item -Wstrict-overflow=2 -+Also warn about other cases where a comparison is simplified to a -+constant. For example: @code{abs (x) >= 0}. This can only be -+simplified when @option{-fstrict-overflow} is in effect, because -+@code{abs (INT_MIN)} overflows to @code{INT_MIN}, which is less than -+zero. @option{-Wstrict-overflow} (with no level) is the same as -+@option{-Wstrict-overflow=2}. -+ -+@item -Wstrict-overflow=3 -+Also warn about other cases where a comparison is simplified. For -+example: @code{x + 1 > 1} will be simplified to @code{x > 0}. -+ -+@item -Wstrict-overflow=4 -+Also warn about other simplifications not covered by the above cases. -+For example: @code{(x * 10) / 5} will be simplified to @code{x * 2}. -+ -+@item -Wstrict-overflow=5 -+Also warn about cases where the compiler reduces the magnitude of a -+constant involved in a comparison. For example: @code{x + 2 > y} will -+be simplified to @code{x + 1 >= y}. This is reported only at the -+highest warning level because this simplification applies to many -+comparisons, so this warning level will give a very large number of -+false positives. -+@end table -+ -+@item -Warray-bounds -+@opindex Wno-array-bounds -+@opindex Warray-bounds -+This option is only active when @option{-ftree-vrp} is active -+(default for -O2 and above). It warns about subscripts to arrays -+that are always out of bounds. This warning is enabled by @option{-Wall}. -+ -+@item -Wno-div-by-zero -+@opindex Wno-div-by-zero -+@opindex Wdiv-by-zero -+Do not warn about compile-time integer division by zero. Floating point -+division by zero is not warned about, as it can be a legitimate way of -+obtaining infinities and NaNs. -+ -+@item -Wsystem-headers -+@opindex Wsystem-headers -+@opindex Wno-system-headers -+@cindex warnings from system headers -+@cindex system headers, warnings from -+Print warning messages for constructs found in system header files. -+Warnings from system headers are normally suppressed, on the assumption -+that they usually do not indicate real problems and would only make the -+compiler output harder to read. Using this command line option tells -+GCC to emit warnings from system headers as if they occurred in user -+code. However, note that using @option{-Wall} in conjunction with this -+option will @emph{not} warn about unknown pragmas in system -+headers---for that, @option{-Wunknown-pragmas} must also be used. -+ -+@item -Wfloat-equal -+@opindex Wfloat-equal -+@opindex Wno-float-equal -+Warn if floating point values are used in equality comparisons. -+ -+The idea behind this is that sometimes it is convenient (for the -+programmer) to consider floating-point values as approximations to -+infinitely precise real numbers. If you are doing this, then you need -+to compute (by analyzing the code, or in some other way) the maximum or -+likely maximum error that the computation introduces, and allow for it -+when performing comparisons (and when producing output, but that's a -+different problem). In particular, instead of testing for equality, you -+would check to see whether the two values have ranges that overlap; and -+this is done with the relational operators, so equality comparisons are -+probably mistaken. -+ -+@item -Wtraditional @r{(C and Objective-C only)} -+@opindex Wtraditional -+@opindex Wno-traditional -+Warn about certain constructs that behave differently in traditional and -+ISO C@. Also warn about ISO C constructs that have no traditional C -+equivalent, and/or problematic constructs which should be avoided. -+ -+@itemize @bullet -+@item -+Macro parameters that appear within string literals in the macro body. -+In traditional C macro replacement takes place within string literals, -+but does not in ISO C@. -+ -+@item -+In traditional C, some preprocessor directives did not exist. -+Traditional preprocessors would only consider a line to be a directive -+if the @samp{#} appeared in column 1 on the line. Therefore -+@option{-Wtraditional} warns about directives that traditional C -+understands but would ignore because the @samp{#} does not appear as the -+first character on the line. It also suggests you hide directives like -+@samp{#pragma} not understood by traditional C by indenting them. Some -+traditional implementations would not recognize @samp{#elif}, so it -+suggests avoiding it altogether. -+ -+@item -+A function-like macro that appears without arguments. -+ -+@item -+The unary plus operator. -+ -+@item -+The @samp{U} integer constant suffix, or the @samp{F} or @samp{L} floating point -+constant suffixes. (Traditional C does support the @samp{L} suffix on integer -+constants.) Note, these suffixes appear in macros defined in the system -+headers of most modern systems, e.g.@: the @samp{_MIN}/@samp{_MAX} macros in @code{<limits.h>}. -+Use of these macros in user code might normally lead to spurious -+warnings, however GCC's integrated preprocessor has enough context to -+avoid warning in these cases. -+ -+@item -+A function declared external in one block and then used after the end of -+the block. -+ -+@item -+A @code{switch} statement has an operand of type @code{long}. -+ -+@item -+A non-@code{static} function declaration follows a @code{static} one. -+This construct is not accepted by some traditional C compilers. -+ -+@item -+The ISO type of an integer constant has a different width or -+signedness from its traditional type. This warning is only issued if -+the base of the constant is ten. I.e.@: hexadecimal or octal values, which -+typically represent bit patterns, are not warned about. -+ -+@item -+Usage of ISO string concatenation is detected. -+ -+@item -+Initialization of automatic aggregates. -+ -+@item -+Identifier conflicts with labels. Traditional C lacks a separate -+namespace for labels. -+ -+@item -+Initialization of unions. If the initializer is zero, the warning is -+omitted. This is done under the assumption that the zero initializer in -+user code appears conditioned on e.g.@: @code{__STDC__} to avoid missing -+initializer warnings and relies on default initialization to zero in the -+traditional C case. -+ -+@item -+Conversions by prototypes between fixed/floating point values and vice -+versa. The absence of these prototypes when compiling with traditional -+C would cause serious problems. This is a subset of the possible -+conversion warnings, for the full set use @option{-Wtraditional-conversion}. -+ -+@item -+Use of ISO C style function definitions. This warning intentionally is -+@emph{not} issued for prototype declarations or variadic functions -+because these ISO C features will appear in your code when using -+libiberty's traditional C compatibility macros, @code{PARAMS} and -+@code{VPARAMS}. This warning is also bypassed for nested functions -+because that feature is already a GCC extension and thus not relevant to -+traditional C compatibility. -+@end itemize -+ -+@item -Wtraditional-conversion @r{(C and Objective-C only)} -+@opindex Wtraditional-conversion -+@opindex Wno-traditional-conversion -+Warn if a prototype causes a type conversion that is different from what -+would happen to the same argument in the absence of a prototype. This -+includes conversions of fixed point to floating and vice versa, and -+conversions changing the width or signedness of a fixed point argument -+except when the same as the default promotion. -+ -+@item -Wdeclaration-after-statement @r{(C and Objective-C only)} -+@opindex Wdeclaration-after-statement -+@opindex Wno-declaration-after-statement -+Warn when a declaration is found after a statement in a block. This -+construct, known from C++, was introduced with ISO C99 and is by default -+allowed in GCC@. It is not supported by ISO C90 and was not supported by -+GCC versions before GCC 3.0. @xref{Mixed Declarations}. -+ -+@item -Wundef -+@opindex Wundef -+@opindex Wno-undef -+Warn if an undefined identifier is evaluated in an @samp{#if} directive. -+ -+@item -Wno-endif-labels -+@opindex Wno-endif-labels -+@opindex Wendif-labels -+Do not warn whenever an @samp{#else} or an @samp{#endif} are followed by text. -+ -+@item -Wshadow -+@opindex Wshadow -+@opindex Wno-shadow -+Warn whenever a local variable shadows another local variable, parameter or -+global variable or whenever a built-in function is shadowed. -+ -+@item -Wlarger-than=@var{len} -+@opindex Wlarger-than=@var{len} -+@opindex Wlarger-than-@var{len} -+Warn whenever an object of larger than @var{len} bytes is defined. -+ -+@item -Wframe-larger-than=@var{len} -+@opindex Wframe-larger-than -+Warn if the size of a function frame is larger than @var{len} bytes. -+The computation done to determine the stack frame size is approximate -+and not conservative. -+The actual requirements may be somewhat greater than @var{len} -+even if you do not get a warning. In addition, any space allocated -+via @code{alloca}, variable-length arrays, or related constructs -+is not included by the compiler when determining -+whether or not to issue a warning. -+ -+@item -Wunsafe-loop-optimizations -+@opindex Wunsafe-loop-optimizations -+@opindex Wno-unsafe-loop-optimizations -+Warn if the loop cannot be optimized because the compiler could not -+assume anything on the bounds of the loop indices. With -+@option{-funsafe-loop-optimizations} warn if the compiler made -+such assumptions. -+ -+@item -Wno-pedantic-ms-format @r{(MinGW targets only)} -+@opindex Wno-pedantic-ms-format -+@opindex Wpedantic-ms-format -+Disables the warnings about non-ISO @code{printf} / @code{scanf} format -+width specifiers @code{I32}, @code{I64}, and @code{I} used on Windows targets -+depending on the MS runtime, when you are using the options @option{-Wformat} -+and @option{-pedantic} without gnu-extensions. -+ -+@item -Wpointer-arith -+@opindex Wpointer-arith -+@opindex Wno-pointer-arith -+Warn about anything that depends on the ``size of'' a function type or -+of @code{void}. GNU C assigns these types a size of 1, for -+convenience in calculations with @code{void *} pointers and pointers -+to functions. In C++, warn also when an arithmetic operation involves -+@code{NULL}. This warning is also enabled by @option{-pedantic}. -+ -+@item -Wtype-limits -+@opindex Wtype-limits -+@opindex Wno-type-limits -+Warn if a comparison is always true or always false due to the limited -+range of the data type, but do not warn for constant expressions. For -+example, warn if an unsigned variable is compared against zero with -+@samp{<} or @samp{>=}. This warning is also enabled by -+@option{-Wextra}. -+ -+@item -Wbad-function-cast @r{(C and Objective-C only)} -+@opindex Wbad-function-cast -+@opindex Wno-bad-function-cast -+Warn whenever a function call is cast to a non-matching type. -+For example, warn if @code{int malloc()} is cast to @code{anything *}. -+ -+@item -Wc++-compat @r{(C and Objective-C only)} -+Warn about ISO C constructs that are outside of the common subset of -+ISO C and ISO C++, e.g.@: request for implicit conversion from -+@code{void *} to a pointer to non-@code{void} type. -+ -+@item -Wc++0x-compat @r{(C++ and Objective-C++ only)} -+Warn about C++ constructs whose meaning differs between ISO C++ 1998 and -+ISO C++ 200x, e.g., identifiers in ISO C++ 1998 that will become keywords -+in ISO C++ 200x. This warning is enabled by @option{-Wall}. -+ -+@item -Wcast-qual -+@opindex Wcast-qual -+@opindex Wno-cast-qual -+Warn whenever a pointer is cast so as to remove a type qualifier from -+the target type. For example, warn if a @code{const char *} is cast -+to an ordinary @code{char *}. -+ -+@item -Wcast-align -+@opindex Wcast-align -+@opindex Wno-cast-align -+Warn whenever a pointer is cast such that the required alignment of the -+target is increased. For example, warn if a @code{char *} is cast to -+an @code{int *} on machines where integers can only be accessed at -+two- or four-byte boundaries. -+ -+@item -Wwrite-strings -+@opindex Wwrite-strings -+@opindex Wno-write-strings -+When compiling C, give string constants the type @code{const -+char[@var{length}]} so that copying the address of one into a -+non-@code{const} @code{char *} pointer will get a warning. These -+warnings will help you find at compile time code that can try to write -+into a string constant, but only if you have been very careful about -+using @code{const} in declarations and prototypes. Otherwise, it will -+just be a nuisance. This is why we did not make @option{-Wall} request -+these warnings. -+ -+When compiling C++, warn about the deprecated conversion from string -+literals to @code{char *}. This warning is enabled by default for C++ -+programs. -+ -+@item -Wclobbered -+@opindex Wclobbered -+@opindex Wno-clobbered -+Warn for variables that might be changed by @samp{longjmp} or -+@samp{vfork}. This warning is also enabled by @option{-Wextra}. -+ -+@item -Wconversion -+@opindex Wconversion -+@opindex Wno-conversion -+Warn for implicit conversions that may alter a value. This includes -+conversions between real and integer, like @code{abs (x)} when -+@code{x} is @code{double}; conversions between signed and unsigned, -+like @code{unsigned ui = -1}; and conversions to smaller types, like -+@code{sqrtf (M_PI)}. Do not warn for explicit casts like @code{abs -+((int) x)} and @code{ui = (unsigned) -1}, or if the value is not -+changed by the conversion like in @code{abs (2.0)}. Warnings about -+conversions between signed and unsigned integers can be disabled by -+using @option{-Wno-sign-conversion}. -+ -+For C++, also warn for conversions between @code{NULL} and non-pointer -+types; confusing overload resolution for user-defined conversions; and -+conversions that will never use a type conversion operator: -+conversions to @code{void}, the same type, a base class or a reference -+to them. Warnings about conversions between signed and unsigned -+integers are disabled by default in C++ unless -+@option{-Wsign-conversion} is explicitly enabled. -+ -+@item -Wempty-body -+@opindex Wempty-body -+@opindex Wno-empty-body -+Warn if an empty body occurs in an @samp{if}, @samp{else} or @samp{do -+while} statement. This warning is also enabled by @option{-Wextra}. -+ -+@item -Wenum-compare @r{(C++ and Objective-C++ only)} -+@opindex Wenum-compare -+@opindex Wno-enum-compare -+Warn about a comparison between values of different enum types. This -+warning is enabled by default. -+ -+@item -Wsign-compare -+@opindex Wsign-compare -+@opindex Wno-sign-compare -+@cindex warning for comparison of signed and unsigned values -+@cindex comparison of signed and unsigned values, warning -+@cindex signed and unsigned values, comparison warning -+Warn when a comparison between signed and unsigned values could produce -+an incorrect result when the signed value is converted to unsigned. -+This warning is also enabled by @option{-Wextra}; to get the other warnings -+of @option{-Wextra} without this warning, use @samp{-Wextra -Wno-sign-compare}. -+ -+@item -Wsign-conversion -+@opindex Wsign-conversion -+@opindex Wno-sign-conversion -+Warn for implicit conversions that may change the sign of an integer -+value, like assigning a signed integer expression to an unsigned -+integer variable. An explicit cast silences the warning. In C, this -+option is enabled also by @option{-Wconversion}. -+ -+@item -Waddress -+@opindex Waddress -+@opindex Wno-address -+Warn about suspicious uses of memory addresses. These include using -+the address of a function in a conditional expression, such as -+@code{void func(void); if (func)}, and comparisons against the memory -+address of a string literal, such as @code{if (x == "abc")}. Such -+uses typically indicate a programmer error: the address of a function -+always evaluates to true, so their use in a conditional usually -+indicate that the programmer forgot the parentheses in a function -+call; and comparisons against string literals result in unspecified -+behavior and are not portable in C, so they usually indicate that the -+programmer intended to use @code{strcmp}. This warning is enabled by -+@option{-Wall}. -+ -+@item -Wlogical-op -+@opindex Wlogical-op -+@opindex Wno-logical-op -+Warn about suspicious uses of logical operators in expressions. -+This includes using logical operators in contexts where a -+bit-wise operator is likely to be expected. -+ -+@item -Waggregate-return -+@opindex Waggregate-return -+@opindex Wno-aggregate-return -+Warn if any functions that return structures or unions are defined or -+called. (In languages where you can return an array, this also elicits -+a warning.) -+ -+@item -Wno-attributes -+@opindex Wno-attributes -+@opindex Wattributes -+Do not warn if an unexpected @code{__attribute__} is used, such as -+unrecognized attributes, function attributes applied to variables, -+etc. This will not stop errors for incorrect use of supported -+attributes. -+ -+@item -Wno-builtin-macro-redefined -+@opindex Wno-builtin-macro-redefined -+@opindex Wbuiltin-macro-redefined -+Do not warn if certain built-in macros are redefined. This suppresses -+warnings for redefinition of @code{__TIMESTAMP__}, @code{__TIME__}, -+@code{__DATE__}, @code{__FILE__}, and @code{__BASE_FILE__}. -+ -+@item -Wstrict-prototypes @r{(C and Objective-C only)} -+@opindex Wstrict-prototypes -+@opindex Wno-strict-prototypes -+Warn if a function is declared or defined without specifying the -+argument types. (An old-style function definition is permitted without -+a warning if preceded by a declaration which specifies the argument -+types.) -+ -+@item -Wold-style-declaration @r{(C and Objective-C only)} -+@opindex Wold-style-declaration -+@opindex Wno-old-style-declaration -+Warn for obsolescent usages, according to the C Standard, in a -+declaration. For example, warn if storage-class specifiers like -+@code{static} are not the first things in a declaration. This warning -+is also enabled by @option{-Wextra}. -+ -+@item -Wold-style-definition @r{(C and Objective-C only)} -+@opindex Wold-style-definition -+@opindex Wno-old-style-definition -+Warn if an old-style function definition is used. A warning is given -+even if there is a previous prototype. -+ -+@item -Wmissing-parameter-type @r{(C and Objective-C only)} -+@opindex Wmissing-parameter-type -+@opindex Wno-missing-parameter-type -+A function parameter is declared without a type specifier in K&R-style -+functions: -+ -+@smallexample -+void foo(bar) @{ @} -+@end smallexample -+ -+This warning is also enabled by @option{-Wextra}. -+ -+@item -Wmissing-prototypes @r{(C and Objective-C only)} -+@opindex Wmissing-prototypes -+@opindex Wno-missing-prototypes -+Warn if a global function is defined without a previous prototype -+declaration. This warning is issued even if the definition itself -+provides a prototype. The aim is to detect global functions that fail -+to be declared in header files. -+ -+@item -Wmissing-declarations -+@opindex Wmissing-declarations -+@opindex Wno-missing-declarations -+Warn if a global function is defined without a previous declaration. -+Do so even if the definition itself provides a prototype. -+Use this option to detect global functions that are not declared in -+header files. In C++, no warnings are issued for function templates, -+or for inline functions, or for functions in anonymous namespaces. -+ -+@item -Wmissing-field-initializers -+@opindex Wmissing-field-initializers -+@opindex Wno-missing-field-initializers -+@opindex W -+@opindex Wextra -+@opindex Wno-extra -+Warn if a structure's initializer has some fields missing. For -+example, the following code would cause such a warning, because -+@code{x.h} is implicitly zero: -+ -+@smallexample -+struct s @{ int f, g, h; @}; -+struct s x = @{ 3, 4 @}; -+@end smallexample -+ -+This option does not warn about designated initializers, so the following -+modification would not trigger a warning: -+ -+@smallexample -+struct s @{ int f, g, h; @}; -+struct s x = @{ .f = 3, .g = 4 @}; -+@end smallexample -+ -+This warning is included in @option{-Wextra}. To get other @option{-Wextra} -+warnings without this one, use @samp{-Wextra -Wno-missing-field-initializers}. -+ -+@item -Wmissing-noreturn -+@opindex Wmissing-noreturn -+@opindex Wno-missing-noreturn -+Warn about functions which might be candidates for attribute @code{noreturn}. -+Note these are only possible candidates, not absolute ones. Care should -+be taken to manually verify functions actually do not ever return before -+adding the @code{noreturn} attribute, otherwise subtle code generation -+bugs could be introduced. You will not get a warning for @code{main} in -+hosted C environments. -+ -+@item -Wmissing-format-attribute -+@opindex Wmissing-format-attribute -+@opindex Wno-missing-format-attribute -+@opindex Wformat -+@opindex Wno-format -+Warn about function pointers which might be candidates for @code{format} -+attributes. Note these are only possible candidates, not absolute ones. -+GCC will guess that function pointers with @code{format} attributes that -+are used in assignment, initialization, parameter passing or return -+statements should have a corresponding @code{format} attribute in the -+resulting type. I.e.@: the left-hand side of the assignment or -+initialization, the type of the parameter variable, or the return type -+of the containing function respectively should also have a @code{format} -+attribute to avoid the warning. -+ -+GCC will also warn about function definitions which might be -+candidates for @code{format} attributes. Again, these are only -+possible candidates. GCC will guess that @code{format} attributes -+might be appropriate for any function that calls a function like -+@code{vprintf} or @code{vscanf}, but this might not always be the -+case, and some functions for which @code{format} attributes are -+appropriate may not be detected. -+ -+@item -Wno-multichar -+@opindex Wno-multichar -+@opindex Wmultichar -+Do not warn if a multicharacter constant (@samp{'FOOF'}) is used. -+Usually they indicate a typo in the user's code, as they have -+implementation-defined values, and should not be used in portable code. -+ -+@item -Wnormalized=<none|id|nfc|nfkc> -+@opindex Wnormalized= -+@cindex NFC -+@cindex NFKC -+@cindex character set, input normalization -+In ISO C and ISO C++, two identifiers are different if they are -+different sequences of characters. However, sometimes when characters -+outside the basic ASCII character set are used, you can have two -+different character sequences that look the same. To avoid confusion, -+the ISO 10646 standard sets out some @dfn{normalization rules} which -+when applied ensure that two sequences that look the same are turned into -+the same sequence. GCC can warn you if you are using identifiers which -+have not been normalized; this option controls that warning. -+ -+There are four levels of warning that GCC supports. The default is -+@option{-Wnormalized=nfc}, which warns about any identifier which is -+not in the ISO 10646 ``C'' normalized form, @dfn{NFC}. NFC is the -+recommended form for most uses. -+ -+Unfortunately, there are some characters which ISO C and ISO C++ allow -+in identifiers that when turned into NFC aren't allowable as -+identifiers. That is, there's no way to use these symbols in portable -+ISO C or C++ and have all your identifiers in NFC@. -+@option{-Wnormalized=id} suppresses the warning for these characters. -+It is hoped that future versions of the standards involved will correct -+this, which is why this option is not the default. -+ -+You can switch the warning off for all characters by writing -+@option{-Wnormalized=none}. You would only want to do this if you -+were using some other normalization scheme (like ``D''), because -+otherwise you can easily create bugs that are literally impossible to see. -+ -+Some characters in ISO 10646 have distinct meanings but look identical -+in some fonts or display methodologies, especially once formatting has -+been applied. For instance @code{\u207F}, ``SUPERSCRIPT LATIN SMALL -+LETTER N'', will display just like a regular @code{n} which has been -+placed in a superscript. ISO 10646 defines the @dfn{NFKC} -+normalization scheme to convert all these into a standard form as -+well, and GCC will warn if your code is not in NFKC if you use -+@option{-Wnormalized=nfkc}. This warning is comparable to warning -+about every identifier that contains the letter O because it might be -+confused with the digit 0, and so is not the default, but may be -+useful as a local coding convention if the programming environment is -+unable to be fixed to display these characters distinctly. -+ -+@item -Wno-deprecated -+@opindex Wno-deprecated -+@opindex Wdeprecated -+Do not warn about usage of deprecated features. @xref{Deprecated Features}. -+ -+@item -Wno-deprecated-declarations -+@opindex Wno-deprecated-declarations -+@opindex Wdeprecated-declarations -+Do not warn about uses of functions (@pxref{Function Attributes}), -+variables (@pxref{Variable Attributes}), and types (@pxref{Type -+Attributes}) marked as deprecated by using the @code{deprecated} -+attribute. -+ -+@item -Wno-overflow -+@opindex Wno-overflow -+@opindex Woverflow -+Do not warn about compile-time overflow in constant expressions. -+ -+@item -Woverride-init @r{(C and Objective-C only)} -+@opindex Woverride-init -+@opindex Wno-override-init -+@opindex W -+@opindex Wextra -+@opindex Wno-extra -+Warn if an initialized field without side effects is overridden when -+using designated initializers (@pxref{Designated Inits, , Designated -+Initializers}). -+ -+This warning is included in @option{-Wextra}. To get other -+@option{-Wextra} warnings without this one, use @samp{-Wextra -+-Wno-override-init}. -+ -+@item -Wpacked -+@opindex Wpacked -+@opindex Wno-packed -+Warn if a structure is given the packed attribute, but the packed -+attribute has no effect on the layout or size of the structure. -+Such structures may be mis-aligned for little benefit. For -+instance, in this code, the variable @code{f.x} in @code{struct bar} -+will be misaligned even though @code{struct bar} does not itself -+have the packed attribute: -+ -+@smallexample -+@group -+struct foo @{ -+ int x; -+ char a, b, c, d; -+@} __attribute__((packed)); -+struct bar @{ -+ char z; -+ struct foo f; -+@}; -+@end group -+@end smallexample -+ -+@item -Wpacked-bitfield-compat -+@opindex Wpacked-bitfield-compat -+@opindex Wno-packed-bitfield-compat -+The 4.1, 4.2 and 4.3 series of GCC ignore the @code{packed} attribute -+on bit-fields of type @code{char}. This has been fixed in GCC 4.4 but -+the change can lead to differences in the structure layout. GCC -+informs you when the offset of such a field has changed in GCC 4.4. -+For example there is no longer a 4-bit padding between field @code{a} -+and @code{b} in this structure: -+ -+@smallexample -+struct foo -+@{ -+ char a:4; -+ char b:8; -+@} __attribute__ ((packed)); -+@end smallexample -+ -+This warning is enabled by default. Use -+@option{-Wno-packed-bitfield-compat} to disable this warning. -+ -+@item -Wpadded -+@opindex Wpadded -+@opindex Wno-padded -+Warn if padding is included in a structure, either to align an element -+of the structure or to align the whole structure. Sometimes when this -+happens it is possible to rearrange the fields of the structure to -+reduce the padding and so make the structure smaller. -+ -+@item -Wredundant-decls -+@opindex Wredundant-decls -+@opindex Wno-redundant-decls -+Warn if anything is declared more than once in the same scope, even in -+cases where multiple declaration is valid and changes nothing. -+ -+@item -Wnested-externs @r{(C and Objective-C only)} -+@opindex Wnested-externs -+@opindex Wno-nested-externs -+Warn if an @code{extern} declaration is encountered within a function. -+ -+@item -Wunreachable-code -+@opindex Wunreachable-code -+@opindex Wno-unreachable-code -+Warn if the compiler detects that code will never be executed. -+ -+This option is intended to warn when the compiler detects that at -+least a whole line of source code will never be executed, because -+some condition is never satisfied or because it is after a -+procedure that never returns. -+ -+It is possible for this option to produce a warning even though there -+are circumstances under which part of the affected line can be executed, -+so care should be taken when removing apparently-unreachable code. -+ -+For instance, when a function is inlined, a warning may mean that the -+line is unreachable in only one inlined copy of the function. -+ -+This option is not made part of @option{-Wall} because in a debugging -+version of a program there is often substantial code which checks -+correct functioning of the program and is, hopefully, unreachable -+because the program does work. Another common use of unreachable -+code is to provide behavior which is selectable at compile-time. -+ -+@item -Winline -+@opindex Winline -+@opindex Wno-inline -+Warn if a function can not be inlined and it was declared as inline. -+Even with this option, the compiler will not warn about failures to -+inline functions declared in system headers. -+ -+The compiler uses a variety of heuristics to determine whether or not -+to inline a function. For example, the compiler takes into account -+the size of the function being inlined and the amount of inlining -+that has already been done in the current function. Therefore, -+seemingly insignificant changes in the source program can cause the -+warnings produced by @option{-Winline} to appear or disappear. -+ -+@item -Wno-invalid-offsetof @r{(C++ and Objective-C++ only)} -+@opindex Wno-invalid-offsetof -+@opindex Winvalid-offsetof -+Suppress warnings from applying the @samp{offsetof} macro to a non-POD -+type. According to the 1998 ISO C++ standard, applying @samp{offsetof} -+to a non-POD type is undefined. In existing C++ implementations, -+however, @samp{offsetof} typically gives meaningful results even when -+applied to certain kinds of non-POD types. (Such as a simple -+@samp{struct} that fails to be a POD type only by virtue of having a -+constructor.) This flag is for users who are aware that they are -+writing nonportable code and who have deliberately chosen to ignore the -+warning about it. -+ -+The restrictions on @samp{offsetof} may be relaxed in a future version -+of the C++ standard. -+ -+@item -Wno-int-to-pointer-cast @r{(C and Objective-C only)} -+@opindex Wno-int-to-pointer-cast -+@opindex Wint-to-pointer-cast -+Suppress warnings from casts to pointer type of an integer of a -+different size. -+ -+@item -Wno-pointer-to-int-cast @r{(C and Objective-C only)} -+@opindex Wno-pointer-to-int-cast -+@opindex Wpointer-to-int-cast -+Suppress warnings from casts from a pointer to an integer type of a -+different size. -+ -+@item -Winvalid-pch -+@opindex Winvalid-pch -+@opindex Wno-invalid-pch -+Warn if a precompiled header (@pxref{Precompiled Headers}) is found in -+the search path but can't be used. -+ -+@item -Wlong-long -+@opindex Wlong-long -+@opindex Wno-long-long -+Warn if @samp{long long} type is used. This is default. To inhibit -+the warning messages, use @option{-Wno-long-long}. Flags -+@option{-Wlong-long} and @option{-Wno-long-long} are taken into account -+only when @option{-pedantic} flag is used. -+ -+@item -Wvariadic-macros -+@opindex Wvariadic-macros -+@opindex Wno-variadic-macros -+Warn if variadic macros are used in pedantic ISO C90 mode, or the GNU -+alternate syntax when in pedantic ISO C99 mode. This is default. -+To inhibit the warning messages, use @option{-Wno-variadic-macros}. -+ -+@item -Wvla -+@opindex Wvla -+@opindex Wno-vla -+Warn if variable length array is used in the code. -+@option{-Wno-vla} will prevent the @option{-pedantic} warning of -+the variable length array. -+ -+@item -Wvolatile-register-var -+@opindex Wvolatile-register-var -+@opindex Wno-volatile-register-var -+Warn if a register variable is declared volatile. The volatile -+modifier does not inhibit all optimizations that may eliminate reads -+and/or writes to register variables. This warning is enabled by -+@option{-Wall}. -+ -+@item -Wdisabled-optimization -+@opindex Wdisabled-optimization -+@opindex Wno-disabled-optimization -+Warn if a requested optimization pass is disabled. This warning does -+not generally indicate that there is anything wrong with your code; it -+merely indicates that GCC's optimizers were unable to handle the code -+effectively. Often, the problem is that your code is too big or too -+complex; GCC will refuse to optimize programs when the optimization -+itself is likely to take inordinate amounts of time. -+ -+@item -Wpointer-sign @r{(C and Objective-C only)} -+@opindex Wpointer-sign -+@opindex Wno-pointer-sign -+Warn for pointer argument passing or assignment with different signedness. -+This option is only supported for C and Objective-C@. It is implied by -+@option{-Wall} and by @option{-pedantic}, which can be disabled with -+@option{-Wno-pointer-sign}. -+ -+@item -Wstack-protector -+@opindex Wstack-protector -+@opindex Wno-stack-protector -+This option is only active when @option{-fstack-protector} is active. It -+warns about functions that will not be protected against stack smashing. -+ -+@item -Wno-mudflap -+@opindex Wno-mudflap -+Suppress warnings about constructs that cannot be instrumented by -+@option{-fmudflap}. -+ -+@item -Woverlength-strings -+@opindex Woverlength-strings -+@opindex Wno-overlength-strings -+Warn about string constants which are longer than the ``minimum -+maximum'' length specified in the C standard. Modern compilers -+generally allow string constants which are much longer than the -+standard's minimum limit, but very portable programs should avoid -+using longer strings. -+ -+The limit applies @emph{after} string constant concatenation, and does -+not count the trailing NUL@. In C89, the limit was 509 characters; in -+C99, it was raised to 4095. C++98 does not specify a normative -+minimum maximum, so we do not diagnose overlength strings in C++@. -+ -+This option is implied by @option{-pedantic}, and can be disabled with -+@option{-Wno-overlength-strings}. -+@end table -+ -+@node Debugging Options -+@section Options for Debugging Your Program or GCC -+@cindex options, debugging -+@cindex debugging information options -+ -+GCC has various special options that are used for debugging -+either your program or GCC: -+ -+@table @gcctabopt -+@item -g -+@opindex g -+Produce debugging information in the operating system's native format -+(stabs, COFF, XCOFF, or DWARF 2)@. GDB can work with this debugging -+information. -+ -+On most systems that use stabs format, @option{-g} enables use of extra -+debugging information that only GDB can use; this extra information -+makes debugging work better in GDB but will probably make other debuggers -+crash or -+refuse to read the program. If you want to control for certain whether -+to generate the extra information, use @option{-gstabs+}, @option{-gstabs}, -+@option{-gxcoff+}, @option{-gxcoff}, or @option{-gvms} (see below). -+ -+GCC allows you to use @option{-g} with -+@option{-O}. The shortcuts taken by optimized code may occasionally -+produce surprising results: some variables you declared may not exist -+at all; flow of control may briefly move where you did not expect it; -+some statements may not be executed because they compute constant -+results or their values were already at hand; some statements may -+execute in different places because they were moved out of loops. -+ -+Nevertheless it proves possible to debug optimized output. This makes -+it reasonable to use the optimizer for programs that might have bugs. -+ -+The following options are useful when GCC is generated with the -+capability for more than one debugging format. -+ -+@item -ggdb -+@opindex ggdb -+Produce debugging information for use by GDB@. This means to use the -+most expressive format available (DWARF 2, stabs, or the native format -+if neither of those are supported), including GDB extensions if at all -+possible. -+ -+@item -gstabs -+@opindex gstabs -+Produce debugging information in stabs format (if that is supported), -+without GDB extensions. This is the format used by DBX on most BSD -+systems. On MIPS, Alpha and System V Release 4 systems this option -+produces stabs debugging output which is not understood by DBX or SDB@. -+On System V Release 4 systems this option requires the GNU assembler. -+ -+@item -feliminate-unused-debug-symbols -+@opindex feliminate-unused-debug-symbols -+Produce debugging information in stabs format (if that is supported), -+for only symbols that are actually used. -+ -+@item -femit-class-debug-always -+Instead of emitting debugging information for a C++ class in only one -+object file, emit it in all object files using the class. This option -+should be used only with debuggers that are unable to handle the way GCC -+normally emits debugging information for classes because using this -+option will increase the size of debugging information by as much as a -+factor of two. -+ -+@item -gstabs+ -+@opindex gstabs+ -+Produce debugging information in stabs format (if that is supported), -+using GNU extensions understood only by the GNU debugger (GDB)@. The -+use of these extensions is likely to make other debuggers crash or -+refuse to read the program. -+ -+@item -gcoff -+@opindex gcoff -+Produce debugging information in COFF format (if that is supported). -+This is the format used by SDB on most System V systems prior to -+System V Release 4. -+ -+@item -gxcoff -+@opindex gxcoff -+Produce debugging information in XCOFF format (if that is supported). -+This is the format used by the DBX debugger on IBM RS/6000 systems. -+ -+@item -gxcoff+ -+@opindex gxcoff+ -+Produce debugging information in XCOFF format (if that is supported), -+using GNU extensions understood only by the GNU debugger (GDB)@. The -+use of these extensions is likely to make other debuggers crash or -+refuse to read the program, and may cause assemblers other than the GNU -+assembler (GAS) to fail with an error. -+ -+@item -gdwarf-2 -+@opindex gdwarf-2 -+Produce debugging information in DWARF version 2 format (if that is -+supported). This is the format used by DBX on IRIX 6. With this -+option, GCC uses features of DWARF version 3 when they are useful; -+version 3 is upward compatible with version 2, but may still cause -+problems for older debuggers. -+ -+@item -gvms -+@opindex gvms -+Produce debugging information in VMS debug format (if that is -+supported). This is the format used by DEBUG on VMS systems. -+ -+@item -g@var{level} -+@itemx -ggdb@var{level} -+@itemx -gstabs@var{level} -+@itemx -gcoff@var{level} -+@itemx -gxcoff@var{level} -+@itemx -gvms@var{level} -+Request debugging information and also use @var{level} to specify how -+much information. The default level is 2. -+ -+Level 0 produces no debug information at all. Thus, @option{-g0} negates -+@option{-g}. -+ -+Level 1 produces minimal information, enough for making backtraces in -+parts of the program that you don't plan to debug. This includes -+descriptions of functions and external variables, but no information -+about local variables and no line numbers. -+ -+Level 3 includes extra information, such as all the macro definitions -+present in the program. Some debuggers support macro expansion when -+you use @option{-g3}. -+ -+@option{-gdwarf-2} does not accept a concatenated debug level, because -+GCC used to support an option @option{-gdwarf} that meant to generate -+debug information in version 1 of the DWARF format (which is very -+different from version 2), and it would have been too confusing. That -+debug format is long obsolete, but the option cannot be changed now. -+Instead use an additional @option{-g@var{level}} option to change the -+debug level for DWARF2. -+ -+@item -feliminate-dwarf2-dups -+@opindex feliminate-dwarf2-dups -+Compress DWARF2 debugging information by eliminating duplicated -+information about each symbol. This option only makes sense when -+generating DWARF2 debugging information with @option{-gdwarf-2}. -+ -+@item -femit-struct-debug-baseonly -+Emit debug information for struct-like types -+only when the base name of the compilation source file -+matches the base name of file in which the struct was defined. -+ -+This option substantially reduces the size of debugging information, -+but at significant potential loss in type information to the debugger. -+See @option{-femit-struct-debug-reduced} for a less aggressive option. -+See @option{-femit-struct-debug-detailed} for more detailed control. -+ -+This option works only with DWARF 2. -+ -+@item -femit-struct-debug-reduced -+Emit debug information for struct-like types -+only when the base name of the compilation source file -+matches the base name of file in which the type was defined, -+unless the struct is a template or defined in a system header. -+ -+This option significantly reduces the size of debugging information, -+with some potential loss in type information to the debugger. -+See @option{-femit-struct-debug-baseonly} for a more aggressive option. -+See @option{-femit-struct-debug-detailed} for more detailed control. -+ -+This option works only with DWARF 2. -+ -+@item -femit-struct-debug-detailed@r{[}=@var{spec-list}@r{]} -+Specify the struct-like types -+for which the compiler will generate debug information. -+The intent is to reduce duplicate struct debug information -+between different object files within the same program. -+ -+This option is a detailed version of -+@option{-femit-struct-debug-reduced} and @option{-femit-struct-debug-baseonly}, -+which will serve for most needs. -+ -+A specification has the syntax -+[@samp{dir:}|@samp{ind:}][@samp{ord:}|@samp{gen:}](@samp{any}|@samp{sys}|@samp{base}|@samp{none}) -+ -+The optional first word limits the specification to -+structs that are used directly (@samp{dir:}) or used indirectly (@samp{ind:}). -+A struct type is used directly when it is the type of a variable, member. -+Indirect uses arise through pointers to structs. -+That is, when use of an incomplete struct would be legal, the use is indirect. -+An example is -+@samp{struct one direct; struct two * indirect;}. -+ -+The optional second word limits the specification to -+ordinary structs (@samp{ord:}) or generic structs (@samp{gen:}). -+Generic structs are a bit complicated to explain. -+For C++, these are non-explicit specializations of template classes, -+or non-template classes within the above. -+Other programming languages have generics, -+but @samp{-femit-struct-debug-detailed} does not yet implement them. -+ -+The third word specifies the source files for those -+structs for which the compiler will emit debug information. -+The values @samp{none} and @samp{any} have the normal meaning. -+The value @samp{base} means that -+the base of name of the file in which the type declaration appears -+must match the base of the name of the main compilation file. -+In practice, this means that -+types declared in @file{foo.c} and @file{foo.h} will have debug information, -+but types declared in other header will not. -+The value @samp{sys} means those types satisfying @samp{base} -+or declared in system or compiler headers. -+ -+You may need to experiment to determine the best settings for your application. -+ -+The default is @samp{-femit-struct-debug-detailed=all}. -+ -+This option works only with DWARF 2. -+ -+@item -fno-merge-debug-strings -+@opindex fmerge-debug-strings -+@opindex fno-merge-debug-strings -+Direct the linker to not merge together strings in the debugging -+information which are identical in different object files. Merging is -+not supported by all assemblers or linkers. Merging decreases the size -+of the debug information in the output file at the cost of increasing -+link processing time. Merging is enabled by default. -+ -+@item -fdebug-prefix-map=@var{old}=@var{new} -+@opindex fdebug-prefix-map -+When compiling files in directory @file{@var{old}}, record debugging -+information describing them as in @file{@var{new}} instead. -+ -+@item -fno-dwarf2-cfi-asm -+@opindex fdwarf2-cfi-asm -+@opindex fno-dwarf2-cfi-asm -+Emit DWARF 2 unwind info as compiler generated @code{.eh_frame} section -+instead of using GAS @code{.cfi_*} directives. -+ -+@cindex @command{prof} -+@item -p -+@opindex p -+Generate extra code to write profile information suitable for the -+analysis program @command{prof}. You must use this option when compiling -+the source files you want data about, and you must also use it when -+linking. -+ -+@cindex @command{gprof} -+@item -pg -+@opindex pg -+Generate extra code to write profile information suitable for the -+analysis program @command{gprof}. You must use this option when compiling -+the source files you want data about, and you must also use it when -+linking. -+ -+@item -Q -+@opindex Q -+Makes the compiler print out each function name as it is compiled, and -+print some statistics about each pass when it finishes. -+ -+@item -ftime-report -+@opindex ftime-report -+Makes the compiler print some statistics about the time consumed by each -+pass when it finishes. -+ -+@item -fmem-report -+@opindex fmem-report -+Makes the compiler print some statistics about permanent memory -+allocation when it finishes. -+ -+@item -fpre-ipa-mem-report -+@opindex fpre-ipa-mem-report -+@item -fpost-ipa-mem-report -+@opindex fpost-ipa-mem-report -+Makes the compiler print some statistics about permanent memory -+allocation before or after interprocedural optimization. -+ -+@item -fprofile-arcs -+@opindex fprofile-arcs -+Add code so that program flow @dfn{arcs} are instrumented. During -+execution the program records how many times each branch and call is -+executed and how many times it is taken or returns. When the compiled -+program exits it saves this data to a file called -+@file{@var{auxname}.gcda} for each source file. The data may be used for -+profile-directed optimizations (@option{-fbranch-probabilities}), or for -+test coverage analysis (@option{-ftest-coverage}). Each object file's -+@var{auxname} is generated from the name of the output file, if -+explicitly specified and it is not the final executable, otherwise it is -+the basename of the source file. In both cases any suffix is removed -+(e.g.@: @file{foo.gcda} for input file @file{dir/foo.c}, or -+@file{dir/foo.gcda} for output file specified as @option{-o dir/foo.o}). -+@xref{Cross-profiling}. -+ -+@cindex @command{gcov} -+@item --coverage -+@opindex coverage -+ -+This option is used to compile and link code instrumented for coverage -+analysis. The option is a synonym for @option{-fprofile-arcs} -+@option{-ftest-coverage} (when compiling) and @option{-lgcov} (when -+linking). See the documentation for those options for more details. -+ -+@itemize -+ -+@item -+Compile the source files with @option{-fprofile-arcs} plus optimization -+and code generation options. For test coverage analysis, use the -+additional @option{-ftest-coverage} option. You do not need to profile -+every source file in a program. -+ -+@item -+Link your object files with @option{-lgcov} or @option{-fprofile-arcs} -+(the latter implies the former). -+ -+@item -+Run the program on a representative workload to generate the arc profile -+information. This may be repeated any number of times. You can run -+concurrent instances of your program, and provided that the file system -+supports locking, the data files will be correctly updated. Also -+@code{fork} calls are detected and correctly handled (double counting -+will not happen). -+ -+@item -+For profile-directed optimizations, compile the source files again with -+the same optimization and code generation options plus -+@option{-fbranch-probabilities} (@pxref{Optimize Options,,Options that -+Control Optimization}). -+ -+@item -+For test coverage analysis, use @command{gcov} to produce human readable -+information from the @file{.gcno} and @file{.gcda} files. Refer to the -+@command{gcov} documentation for further information. -+ -+@end itemize -+ -+With @option{-fprofile-arcs}, for each function of your program GCC -+creates a program flow graph, then finds a spanning tree for the graph. -+Only arcs that are not on the spanning tree have to be instrumented: the -+compiler adds code to count the number of times that these arcs are -+executed. When an arc is the only exit or only entrance to a block, the -+instrumentation code can be added to the block; otherwise, a new basic -+block must be created to hold the instrumentation code. -+ -+@need 2000 -+@item -ftest-coverage -+@opindex ftest-coverage -+Produce a notes file that the @command{gcov} code-coverage utility -+(@pxref{Gcov,, @command{gcov}---a Test Coverage Program}) can use to -+show program coverage. Each source file's note file is called -+@file{@var{auxname}.gcno}. Refer to the @option{-fprofile-arcs} option -+above for a description of @var{auxname} and instructions on how to -+generate test coverage data. Coverage data will match the source files -+more closely, if you do not optimize. -+ -+@item -fdbg-cnt-list -+@opindex fdbg-cnt-list -+Print the name and the counter upperbound for all debug counters. -+ -+@item -fdbg-cnt=@var{counter-value-list} -+@opindex fdbg-cnt -+Set the internal debug counter upperbound. @var{counter-value-list} -+is a comma-separated list of @var{name}:@var{value} pairs -+which sets the upperbound of each debug counter @var{name} to @var{value}. -+All debug counters have the initial upperbound of @var{UINT_MAX}, -+thus dbg_cnt() returns true always unless the upperbound is set by this option. -+e.g. With -fdbg-cnt=dce:10,tail_call:0 -+dbg_cnt(dce) will return true only for first 10 invocations -+and dbg_cnt(tail_call) will return false always. -+ -+@item -d@var{letters} -+@itemx -fdump-rtl-@var{pass} -+@opindex d -+Says to make debugging dumps during compilation at times specified by -+@var{letters}. This is used for debugging the RTL-based passes of the -+compiler. The file names for most of the dumps are made by appending a -+pass number and a word to the @var{dumpname}. @var{dumpname} is generated -+from the name of the output file, if explicitly specified and it is not -+an executable, otherwise it is the basename of the source file. These -+switches may have different effects when @option{-E} is used for -+preprocessing. -+ -+Debug dumps can be enabled with a @option{-fdump-rtl} switch or some -+@option{-d} option @var{letters}. Here are the possible -+letters for use in @var{pass} and @var{letters}, and their meanings: -+ -+@table @gcctabopt -+ -+@item -fdump-rtl-alignments -+@opindex fdump-rtl-alignments -+Dump after branch alignments have been computed. -+ -+@item -fdump-rtl-asmcons -+@opindex fdump-rtl-asmcons -+Dump after fixing rtl statements that have unsatisfied in/out constraints. -+ -+@item -fdump-rtl-auto_inc_dec -+@opindex fdump-rtl-auto_inc_dec -+Dump after auto-inc-dec discovery. This pass is only run on -+architectures that have auto inc or auto dec instructions. -+ -+@item -fdump-rtl-barriers -+@opindex fdump-rtl-barriers -+Dump after cleaning up the barrier instructions. -+ -+@item -fdump-rtl-bbpart -+@opindex fdump-rtl-bbpart -+Dump after partitioning hot and cold basic blocks. -+ -+@item -fdump-rtl-bbro -+@opindex fdump-rtl-bbro -+Dump after block reordering. -+ -+@item -fdump-rtl-btl1 -+@itemx -fdump-rtl-btl2 -+@opindex fdump-rtl-btl2 -+@opindex fdump-rtl-btl2 -+@option{-fdump-rtl-btl1} and @option{-fdump-rtl-btl2} enable dumping -+after the two branch -+target load optimization passes. -+ -+@item -fdump-rtl-bypass -+@opindex fdump-rtl-bypass -+Dump after jump bypassing and control flow optimizations. -+ -+@item -fdump-rtl-combine -+@opindex fdump-rtl-combine -+Dump after the RTL instruction combination pass. -+ -+@item -fdump-rtl-compgotos -+@opindex fdump-rtl-compgotos -+Dump after duplicating the computed gotos. -+ -+@item -fdump-rtl-ce1 -+@itemx -fdump-rtl-ce2 -+@itemx -fdump-rtl-ce3 -+@opindex fdump-rtl-ce1 -+@opindex fdump-rtl-ce2 -+@opindex fdump-rtl-ce3 -+@option{-fdump-rtl-ce1}, @option{-fdump-rtl-ce2}, and -+@option{-fdump-rtl-ce3} enable dumping after the three -+if conversion passes. -+ -+@itemx -fdump-rtl-cprop_hardreg -+@opindex fdump-rtl-cprop_hardreg -+Dump after hard register copy propagation. -+ -+@itemx -fdump-rtl-csa -+@opindex fdump-rtl-csa -+Dump after combining stack adjustments. -+ -+@item -fdump-rtl-cse1 -+@itemx -fdump-rtl-cse2 -+@opindex fdump-rtl-cse1 -+@opindex fdump-rtl-cse2 -+@option{-fdump-rtl-cse1} and @option{-fdump-rtl-cse2} enable dumping after -+the two common sub-expression elimination passes. -+ -+@itemx -fdump-rtl-dce -+@opindex fdump-rtl-dce -+Dump after the standalone dead code elimination passes. -+ -+@itemx -fdump-rtl-dbr -+@opindex fdump-rtl-dbr -+Dump after delayed branch scheduling. -+ -+@item -fdump-rtl-dce1 -+@itemx -fdump-rtl-dce2 -+@opindex fdump-rtl-dce1 -+@opindex fdump-rtl-dce2 -+@option{-fdump-rtl-dce1} and @option{-fdump-rtl-dce2} enable dumping after -+the two dead store elimination passes. -+ -+@item -fdump-rtl-eh -+@opindex fdump-rtl-eh -+Dump after finalization of EH handling code. -+ -+@item -fdump-rtl-eh_ranges -+@opindex fdump-rtl-eh_ranges -+Dump after conversion of EH handling range regions. -+ -+@item -fdump-rtl-expand -+@opindex fdump-rtl-expand -+Dump after RTL generation. -+ -+@item -fdump-rtl-fwprop1 -+@itemx -fdump-rtl-fwprop2 -+@opindex fdump-rtl-fwprop1 -+@opindex fdump-rtl-fwprop2 -+@option{-fdump-rtl-fwprop1} and @option{-fdump-rtl-fwprop2} enable -+dumping after the two forward propagation passes. -+ -+@item -fdump-rtl-gcse1 -+@itemx -fdump-rtl-gcse2 -+@opindex fdump-rtl-gcse1 -+@opindex fdump-rtl-gcse2 -+@option{-fdump-rtl-gcse1} and @option{-fdump-rtl-gcse2} enable dumping -+after global common subexpression elimination. -+ -+@item -fdump-rtl-init-regs -+@opindex fdump-rtl-init-regs -+Dump after the initialization of the registers. -+ -+@item -fdump-rtl-initvals -+@opindex fdump-rtl-initvals -+Dump after the computation of the initial value sets. -+ -+@itemx -fdump-rtl-into_cfglayout -+@opindex fdump-rtl-into_cfglayout -+Dump after converting to cfglayout mode. -+ -+@item -fdump-rtl-ira -+@opindex fdump-rtl-ira -+Dump after iterated register allocation. -+ -+@item -fdump-rtl-jump -+@opindex fdump-rtl-jump -+Dump after the second jump optimization. -+ -+@item -fdump-rtl-loop2 -+@opindex fdump-rtl-loop2 -+@option{-fdump-rtl-loop2} enables dumping after the rtl -+loop optimization passes. -+ -+@item -fdump-rtl-mach -+@opindex fdump-rtl-mach -+Dump after performing the machine dependent reorganization pass, if that -+pass exists. -+ -+@item -fdump-rtl-mode_sw -+@opindex fdump-rtl-mode_sw -+Dump after removing redundant mode switches. -+ -+@item -fdump-rtl-rnreg -+@opindex fdump-rtl-rnreg -+Dump after register renumbering. -+ -+@itemx -fdump-rtl-outof_cfglayout -+@opindex fdump-rtl-outof_cfglayout -+Dump after converting from cfglayout mode. -+ -+@item -fdump-rtl-peephole2 -+@opindex fdump-rtl-peephole2 -+Dump after the peephole pass. -+ -+@item -fdump-rtl-postreload -+@opindex fdump-rtl-postreload -+Dump after post-reload optimizations. -+ -+@itemx -fdump-rtl-pro_and_epilogue -+@opindex fdump-rtl-pro_and_epilogue -+Dump after generating the function pro and epilogues. -+ -+@item -fdump-rtl-regmove -+@opindex fdump-rtl-regmove -+Dump after the register move pass. -+ -+@item -fdump-rtl-sched1 -+@itemx -fdump-rtl-sched2 -+@opindex fdump-rtl-sched1 -+@opindex fdump-rtl-sched2 -+@option{-fdump-rtl-sched1} and @option{-fdump-rtl-sched2} enable dumping -+after the basic block scheduling passes. -+ -+@item -fdump-rtl-see -+@opindex fdump-rtl-see -+Dump after sign extension elimination. -+ -+@item -fdump-rtl-seqabstr -+@opindex fdump-rtl-seqabstr -+Dump after common sequence discovery. -+ -+@item -fdump-rtl-shorten -+@opindex fdump-rtl-shorten -+Dump after shortening branches. -+ -+@item -fdump-rtl-sibling -+@opindex fdump-rtl-sibling -+Dump after sibling call optimizations. -+ -+@item -fdump-rtl-split1 -+@itemx -fdump-rtl-split2 -+@itemx -fdump-rtl-split3 -+@itemx -fdump-rtl-split4 -+@itemx -fdump-rtl-split5 -+@opindex fdump-rtl-split1 -+@opindex fdump-rtl-split2 -+@opindex fdump-rtl-split3 -+@opindex fdump-rtl-split4 -+@opindex fdump-rtl-split5 -+@option{-fdump-rtl-split1}, @option{-fdump-rtl-split2}, -+@option{-fdump-rtl-split3}, @option{-fdump-rtl-split4} and -+@option{-fdump-rtl-split5} enable dumping after five rounds of -+instruction splitting. -+ -+@item -fdump-rtl-sms -+@opindex fdump-rtl-sms -+Dump after modulo scheduling. This pass is only run on some -+architectures. -+ -+@item -fdump-rtl-stack -+@opindex fdump-rtl-stack -+Dump after conversion from GCC's "flat register file" registers to the -+x87's stack-like registers. This pass is only run on x86 variants. -+ -+@item -fdump-rtl-subreg1 -+@itemx -fdump-rtl-subreg2 -+@opindex fdump-rtl-subreg1 -+@opindex fdump-rtl-subreg2 -+@option{-fdump-rtl-subreg1} and @option{-fdump-rtl-subreg2} enable dumping after -+the two subreg expansion passes. -+ -+@item -fdump-rtl-unshare -+@opindex fdump-rtl-unshare -+Dump after all rtl has been unshared. -+ -+@item -fdump-rtl-vartrack -+@opindex fdump-rtl-vartrack -+Dump after variable tracking. -+ -+@item -fdump-rtl-vregs -+@opindex fdump-rtl-vregs -+Dump after converting virtual registers to hard registers. -+ -+@item -fdump-rtl-web -+@opindex fdump-rtl-web -+Dump after live range splitting. -+ -+@item -fdump-rtl-regclass -+@itemx -fdump-rtl-subregs_of_mode_init -+@itemx -fdump-rtl-subregs_of_mode_finish -+@itemx -fdump-rtl-dfinit -+@itemx -fdump-rtl-dfinish -+@opindex fdump-rtl-regclass -+@opindex fdump-rtl-subregs_of_mode_init -+@opindex fdump-rtl-subregs_of_mode_finish -+@opindex fdump-rtl-dfinit -+@opindex fdump-rtl-dfinish -+These dumps are defined but always produce empty files. -+ -+@item -fdump-rtl-all -+@opindex fdump-rtl-all -+Produce all the dumps listed above. -+ -+@item -dA -+@opindex dA -+Annotate the assembler output with miscellaneous debugging information. -+ -+@item -dD -+@opindex dD -+Dump all macro definitions, at the end of preprocessing, in addition to -+normal output. -+ -+@item -dH -+@opindex dH -+Produce a core dump whenever an error occurs. -+ -+@item -dm -+@opindex dm -+Print statistics on memory usage, at the end of the run, to -+standard error. -+ -+@item -dp -+@opindex dp -+Annotate the assembler output with a comment indicating which -+pattern and alternative was used. The length of each instruction is -+also printed. -+ -+@item -dP -+@opindex dP -+Dump the RTL in the assembler output as a comment before each instruction. -+Also turns on @option{-dp} annotation. -+ -+@item -dv -+@opindex dv -+For each of the other indicated dump files (@option{-fdump-rtl-@var{pass}}), -+dump a representation of the control flow graph suitable for viewing with VCG -+to @file{@var{file}.@var{pass}.vcg}. -+ -+@item -dx -+@opindex dx -+Just generate RTL for a function instead of compiling it. Usually used -+with @option{-fdump-rtl-expand}. -+ -+@item -dy -+@opindex dy -+Dump debugging information during parsing, to standard error. -+@end table -+ -+@item -fdump-noaddr -+@opindex fdump-noaddr -+When doing debugging dumps, suppress address output. This makes it more -+feasible to use diff on debugging dumps for compiler invocations with -+different compiler binaries and/or different -+text / bss / data / heap / stack / dso start locations. -+ -+@item -fdump-unnumbered -+@opindex fdump-unnumbered -+When doing debugging dumps, suppress instruction numbers and address output. -+This makes it more feasible to use diff on debugging dumps for compiler -+invocations with different options, in particular with and without -+@option{-g}. -+ -+@item -fdump-translation-unit @r{(C++ only)} -+@itemx -fdump-translation-unit-@var{options} @r{(C++ only)} -+@opindex fdump-translation-unit -+Dump a representation of the tree structure for the entire translation -+unit to a file. The file name is made by appending @file{.tu} to the -+source file name. If the @samp{-@var{options}} form is used, @var{options} -+controls the details of the dump as described for the -+@option{-fdump-tree} options. -+ -+@item -fdump-class-hierarchy @r{(C++ only)} -+@itemx -fdump-class-hierarchy-@var{options} @r{(C++ only)} -+@opindex fdump-class-hierarchy -+Dump a representation of each class's hierarchy and virtual function -+table layout to a file. The file name is made by appending @file{.class} -+to the source file name. If the @samp{-@var{options}} form is used, -+@var{options} controls the details of the dump as described for the -+@option{-fdump-tree} options. -+ -+@item -fdump-ipa-@var{switch} -+@opindex fdump-ipa -+Control the dumping at various stages of inter-procedural analysis -+language tree to a file. The file name is generated by appending a switch -+specific suffix to the source file name. The following dumps are possible: -+ -+@table @samp -+@item all -+Enables all inter-procedural analysis dumps. -+ -+@item cgraph -+Dumps information about call-graph optimization, unused function removal, -+and inlining decisions. -+ -+@item inline -+Dump after function inlining. -+ -+@end table -+ -+@item -fdump-statistics-@var{option} -+@opindex -fdump-statistics -+Enable and control dumping of pass statistics in a separate file. The -+file name is generated by appending a suffix ending in @samp{.statistics} -+to the source file name. If the @samp{-@var{option}} form is used, -+@samp{-stats} will cause counters to be summed over the whole compilation unit -+while @samp{-details} will dump every event as the passes generate them. -+The default with no option is to sum counters for each function compiled. -+ -+@item -fdump-tree-@var{switch} -+@itemx -fdump-tree-@var{switch}-@var{options} -+@opindex fdump-tree -+Control the dumping at various stages of processing the intermediate -+language tree to a file. The file name is generated by appending a switch -+specific suffix to the source file name. If the @samp{-@var{options}} -+form is used, @var{options} is a list of @samp{-} separated options that -+control the details of the dump. Not all options are applicable to all -+dumps, those which are not meaningful will be ignored. The following -+options are available -+ -+@table @samp -+@item address -+Print the address of each node. Usually this is not meaningful as it -+changes according to the environment and source file. Its primary use -+is for tying up a dump file with a debug environment. -+@item slim -+Inhibit dumping of members of a scope or body of a function merely -+because that scope has been reached. Only dump such items when they -+are directly reachable by some other path. When dumping pretty-printed -+trees, this option inhibits dumping the bodies of control structures. -+@item raw -+Print a raw representation of the tree. By default, trees are -+pretty-printed into a C-like representation. -+@item details -+Enable more detailed dumps (not honored by every dump option). -+@item stats -+Enable dumping various statistics about the pass (not honored by every dump -+option). -+@item blocks -+Enable showing basic block boundaries (disabled in raw dumps). -+@item vops -+Enable showing virtual operands for every statement. -+@item lineno -+Enable showing line numbers for statements. -+@item uid -+Enable showing the unique ID (@code{DECL_UID}) for each variable. -+@item verbose -+Enable showing the tree dump for each statement. -+@item all -+Turn on all options, except @option{raw}, @option{slim}, @option{verbose} -+and @option{lineno}. -+@end table -+ -+The following tree dumps are possible: -+@table @samp -+ -+@item original -+Dump before any tree based optimization, to @file{@var{file}.original}. -+ -+@item optimized -+Dump after all tree based optimization, to @file{@var{file}.optimized}. -+ -+@item gimple -+@opindex fdump-tree-gimple -+Dump each function before and after the gimplification pass to a file. The -+file name is made by appending @file{.gimple} to the source file name. -+ -+@item cfg -+@opindex fdump-tree-cfg -+Dump the control flow graph of each function to a file. The file name is -+made by appending @file{.cfg} to the source file name. -+ -+@item vcg -+@opindex fdump-tree-vcg -+Dump the control flow graph of each function to a file in VCG format. The -+file name is made by appending @file{.vcg} to the source file name. Note -+that if the file contains more than one function, the generated file cannot -+be used directly by VCG@. You will need to cut and paste each function's -+graph into its own separate file first. -+ -+@item ch -+@opindex fdump-tree-ch -+Dump each function after copying loop headers. The file name is made by -+appending @file{.ch} to the source file name. -+ -+@item ssa -+@opindex fdump-tree-ssa -+Dump SSA related information to a file. The file name is made by appending -+@file{.ssa} to the source file name. -+ -+@item alias -+@opindex fdump-tree-alias -+Dump aliasing information for each function. The file name is made by -+appending @file{.alias} to the source file name. -+ -+@item ccp -+@opindex fdump-tree-ccp -+Dump each function after CCP@. The file name is made by appending -+@file{.ccp} to the source file name. -+ -+@item storeccp -+@opindex fdump-tree-storeccp -+Dump each function after STORE-CCP@. The file name is made by appending -+@file{.storeccp} to the source file name. -+ -+@item pre -+@opindex fdump-tree-pre -+Dump trees after partial redundancy elimination. The file name is made -+by appending @file{.pre} to the source file name. -+ -+@item fre -+@opindex fdump-tree-fre -+Dump trees after full redundancy elimination. The file name is made -+by appending @file{.fre} to the source file name. -+ -+@item copyprop -+@opindex fdump-tree-copyprop -+Dump trees after copy propagation. The file name is made -+by appending @file{.copyprop} to the source file name. -+ -+@item store_copyprop -+@opindex fdump-tree-store_copyprop -+Dump trees after store copy-propagation. The file name is made -+by appending @file{.store_copyprop} to the source file name. -+ -+@item dce -+@opindex fdump-tree-dce -+Dump each function after dead code elimination. The file name is made by -+appending @file{.dce} to the source file name. -+ -+@item mudflap -+@opindex fdump-tree-mudflap -+Dump each function after adding mudflap instrumentation. The file name is -+made by appending @file{.mudflap} to the source file name. -+ -+@item sra -+@opindex fdump-tree-sra -+Dump each function after performing scalar replacement of aggregates. The -+file name is made by appending @file{.sra} to the source file name. -+ -+@item sink -+@opindex fdump-tree-sink -+Dump each function after performing code sinking. The file name is made -+by appending @file{.sink} to the source file name. -+ -+@item dom -+@opindex fdump-tree-dom -+Dump each function after applying dominator tree optimizations. The file -+name is made by appending @file{.dom} to the source file name. -+ -+@item dse -+@opindex fdump-tree-dse -+Dump each function after applying dead store elimination. The file -+name is made by appending @file{.dse} to the source file name. -+ -+@item phiopt -+@opindex fdump-tree-phiopt -+Dump each function after optimizing PHI nodes into straightline code. The file -+name is made by appending @file{.phiopt} to the source file name. -+ -+@item forwprop -+@opindex fdump-tree-forwprop -+Dump each function after forward propagating single use variables. The file -+name is made by appending @file{.forwprop} to the source file name. -+ -+@item copyrename -+@opindex fdump-tree-copyrename -+Dump each function after applying the copy rename optimization. The file -+name is made by appending @file{.copyrename} to the source file name. -+ -+@item nrv -+@opindex fdump-tree-nrv -+Dump each function after applying the named return value optimization on -+generic trees. The file name is made by appending @file{.nrv} to the source -+file name. -+ -+@item vect -+@opindex fdump-tree-vect -+Dump each function after applying vectorization of loops. The file name is -+made by appending @file{.vect} to the source file name. -+ -+@item vrp -+@opindex fdump-tree-vrp -+Dump each function after Value Range Propagation (VRP). The file name -+is made by appending @file{.vrp} to the source file name. -+ -+@item all -+@opindex fdump-tree-all -+Enable all the available tree dumps with the flags provided in this option. -+@end table -+ -+@item -ftree-vectorizer-verbose=@var{n} -+@opindex ftree-vectorizer-verbose -+This option controls the amount of debugging output the vectorizer prints. -+This information is written to standard error, unless -+@option{-fdump-tree-all} or @option{-fdump-tree-vect} is specified, -+in which case it is output to the usual dump listing file, @file{.vect}. -+For @var{n}=0 no diagnostic information is reported. -+If @var{n}=1 the vectorizer reports each loop that got vectorized, -+and the total number of loops that got vectorized. -+If @var{n}=2 the vectorizer also reports non-vectorized loops that passed -+the first analysis phase (vect_analyze_loop_form) - i.e.@: countable, -+inner-most, single-bb, single-entry/exit loops. This is the same verbosity -+level that @option{-fdump-tree-vect-stats} uses. -+Higher verbosity levels mean either more information dumped for each -+reported loop, or same amount of information reported for more loops: -+If @var{n}=3, alignment related information is added to the reports. -+If @var{n}=4, data-references related information (e.g.@: memory dependences, -+memory access-patterns) is added to the reports. -+If @var{n}=5, the vectorizer reports also non-vectorized inner-most loops -+that did not pass the first analysis phase (i.e., may not be countable, or -+may have complicated control-flow). -+If @var{n}=6, the vectorizer reports also non-vectorized nested loops. -+For @var{n}=7, all the information the vectorizer generates during its -+analysis and transformation is reported. This is the same verbosity level -+that @option{-fdump-tree-vect-details} uses. -+ -+@item -frandom-seed=@var{string} -+@opindex frandom-string -+This option provides a seed that GCC uses when it would otherwise use -+random numbers. It is used to generate certain symbol names -+that have to be different in every compiled file. It is also used to -+place unique stamps in coverage data files and the object files that -+produce them. You can use the @option{-frandom-seed} option to produce -+reproducibly identical object files. -+ -+The @var{string} should be different for every file you compile. -+ -+@item -fsched-verbose=@var{n} -+@opindex fsched-verbose -+On targets that use instruction scheduling, this option controls the -+amount of debugging output the scheduler prints. This information is -+written to standard error, unless @option{-fdump-rtl-sched1} or -+@option{-fdump-rtl-sched2} is specified, in which case it is output -+to the usual dump listing file, @file{.sched} or @file{.sched2} -+respectively. However for @var{n} greater than nine, the output is -+always printed to standard error. -+ -+For @var{n} greater than zero, @option{-fsched-verbose} outputs the -+same information as @option{-fdump-rtl-sched1} and @option{-fdump-rtl-sched2}. -+For @var{n} greater than one, it also output basic block probabilities, -+detailed ready list information and unit/insn info. For @var{n} greater -+than two, it includes RTL at abort point, control-flow and regions info. -+And for @var{n} over four, @option{-fsched-verbose} also includes -+dependence info. -+ -+@item -save-temps -+@opindex save-temps -+Store the usual ``temporary'' intermediate files permanently; place them -+in the current directory and name them based on the source file. Thus, -+compiling @file{foo.c} with @samp{-c -save-temps} would produce files -+@file{foo.i} and @file{foo.s}, as well as @file{foo.o}. This creates a -+preprocessed @file{foo.i} output file even though the compiler now -+normally uses an integrated preprocessor. -+ -+When used in combination with the @option{-x} command line option, -+@option{-save-temps} is sensible enough to avoid over writing an -+input source file with the same extension as an intermediate file. -+The corresponding intermediate file may be obtained by renaming the -+source file before using @option{-save-temps}. -+ -+@item -time -+@opindex time -+Report the CPU time taken by each subprocess in the compilation -+sequence. For C source files, this is the compiler proper and assembler -+(plus the linker if linking is done). The output looks like this: -+ -+@smallexample -+# cc1 0.12 0.01 -+# as 0.00 0.01 -+@end smallexample -+ -+The first number on each line is the ``user time'', that is time spent -+executing the program itself. The second number is ``system time'', -+time spent executing operating system routines on behalf of the program. -+Both numbers are in seconds. -+ -+@item -fvar-tracking -+@opindex fvar-tracking -+Run variable tracking pass. It computes where variables are stored at each -+position in code. Better debugging information is then generated -+(if the debugging information format supports this information). -+ -+It is enabled by default when compiling with optimization (@option{-Os}, -+@option{-O}, @option{-O2}, @dots{}), debugging information (@option{-g}) and -+the debug info format supports it. -+ -+@item -print-file-name=@var{library} -+@opindex print-file-name -+Print the full absolute name of the library file @var{library} that -+would be used when linking---and don't do anything else. With this -+option, GCC does not compile or link anything; it just prints the -+file name. -+ -+@item -print-multi-directory -+@opindex print-multi-directory -+Print the directory name corresponding to the multilib selected by any -+other switches present in the command line. This directory is supposed -+to exist in @env{GCC_EXEC_PREFIX}. -+ -+@item -print-multi-lib -+@opindex print-multi-lib -+Print the mapping from multilib directory names to compiler switches -+that enable them. The directory name is separated from the switches by -+@samp{;}, and each switch starts with an @samp{@@} instead of the -+@samp{-}, without spaces between multiple switches. This is supposed to -+ease shell-processing. -+ -+@item -print-prog-name=@var{program} -+@opindex print-prog-name -+Like @option{-print-file-name}, but searches for a program such as @samp{cpp}. -+ -+@item -print-libgcc-file-name -+@opindex print-libgcc-file-name -+Same as @option{-print-file-name=libgcc.a}. -+ -+This is useful when you use @option{-nostdlib} or @option{-nodefaultlibs} -+but you do want to link with @file{libgcc.a}. You can do -+ -+@smallexample -+gcc -nostdlib @var{files}@dots{} `gcc -print-libgcc-file-name` -+@end smallexample -+ -+@item -print-search-dirs -+@opindex print-search-dirs -+Print the name of the configured installation directory and a list of -+program and library directories @command{gcc} will search---and don't do anything else. -+ -+This is useful when @command{gcc} prints the error message -+@samp{installation problem, cannot exec cpp0: No such file or directory}. -+To resolve this you either need to put @file{cpp0} and the other compiler -+components where @command{gcc} expects to find them, or you can set the environment -+variable @env{GCC_EXEC_PREFIX} to the directory where you installed them. -+Don't forget the trailing @samp{/}. -+@xref{Environment Variables}. -+ -+@item -print-sysroot -+@opindex print-sysroot -+Print the target sysroot directory that will be used during -+compilation. This is the target sysroot specified either at configure -+time or using the @option{--sysroot} option, possibly with an extra -+suffix that depends on compilation options. If no target sysroot is -+specified, the option prints nothing. -+ -+@item -print-sysroot-headers-suffix -+@opindex print-sysroot-headers-suffix -+Print the suffix added to the target sysroot when searching for -+headers, or give an error if the compiler is not configured with such -+a suffix---and don't do anything else. -+ -+@item -dumpmachine -+@opindex dumpmachine -+Print the compiler's target machine (for example, -+@samp{i686-pc-linux-gnu})---and don't do anything else. -+ -+@item -dumpversion -+@opindex dumpversion -+Print the compiler version (for example, @samp{3.0})---and don't do -+anything else. -+ -+@item -dumpspecs -+@opindex dumpspecs -+Print the compiler's built-in specs---and don't do anything else. (This -+is used when GCC itself is being built.) @xref{Spec Files}. -+ -+@item -feliminate-unused-debug-types -+@opindex feliminate-unused-debug-types -+Normally, when producing DWARF2 output, GCC will emit debugging -+information for all types declared in a compilation -+unit, regardless of whether or not they are actually used -+in that compilation unit. Sometimes this is useful, such as -+if, in the debugger, you want to cast a value to a type that is -+not actually used in your program (but is declared). More often, -+however, this results in a significant amount of wasted space. -+With this option, GCC will avoid producing debug symbol output -+for types that are nowhere used in the source file being compiled. -+@end table -+ -+@node Optimize Options -+@section Options That Control Optimization -+@cindex optimize options -+@cindex options, optimization -+ -+These options control various sorts of optimizations. -+ -+Without any optimization option, the compiler's goal is to reduce the -+cost of compilation and to make debugging produce the expected -+results. Statements are independent: if you stop the program with a -+breakpoint between statements, you can then assign a new value to any -+variable or change the program counter to any other statement in the -+function and get exactly the results you would expect from the source -+code. -+ -+Turning on optimization flags makes the compiler attempt to improve -+the performance and/or code size at the expense of compilation time -+and possibly the ability to debug the program. -+ -+The compiler performs optimization based on the knowledge it has of the -+program. Compiling multiple files at once to a single output file mode allows -+the compiler to use information gained from all of the files when compiling -+each of them. -+ -+Not all optimizations are controlled directly by a flag. Only -+optimizations that have a flag are listed. -+ -+@table @gcctabopt -+@item -O -+@itemx -O1 -+@opindex O -+@opindex O1 -+Optimize. Optimizing compilation takes somewhat more time, and a lot -+more memory for a large function. -+ -+With @option{-O}, the compiler tries to reduce code size and execution -+time, without performing any optimizations that take a great deal of -+compilation time. -+ -+@option{-O} turns on the following optimization flags: -+@gccoptlist{ -+-fauto-inc-dec @gol -+-fcprop-registers @gol -+-fdce @gol -+-fdefer-pop @gol -+-fdelayed-branch @gol -+-fdse @gol -+-fguess-branch-probability @gol -+-fif-conversion2 @gol -+-fif-conversion @gol -+-finline-small-functions @gol -+-fipa-pure-const @gol -+-fipa-reference @gol -+-fmerge-constants -+-fsplit-wide-types @gol -+-ftree-builtin-call-dce @gol -+-ftree-ccp @gol -+-ftree-ch @gol -+-ftree-copyrename @gol -+-ftree-dce @gol -+-ftree-dominator-opts @gol -+-ftree-dse @gol -+-ftree-fre @gol -+-ftree-sra @gol -+-ftree-ter @gol -+-funit-at-a-time} -+ -+@option{-O} also turns on @option{-fomit-frame-pointer} on machines -+where doing so does not interfere with debugging. -+ -+@item -O2 -+@opindex O2 -+Optimize even more. GCC performs nearly all supported optimizations -+that do not involve a space-speed tradeoff. -+As compared to @option{-O}, this option increases both compilation time -+and the performance of the generated code. -+ -+@option{-O2} turns on all optimization flags specified by @option{-O}. It -+also turns on the following optimization flags: -+@gccoptlist{-fthread-jumps @gol -+-falign-functions -falign-jumps @gol -+-falign-loops -falign-labels @gol -+-fcaller-saves @gol -+-fcrossjumping @gol -+-fcse-follow-jumps -fcse-skip-blocks @gol -+-fdelete-null-pointer-checks @gol -+-fexpensive-optimizations @gol -+-fgcse -fgcse-lm @gol -+-findirect-inlining @gol -+-foptimize-sibling-calls @gol -+-fpeephole2 @gol -+-fregmove @gol -+-freorder-blocks -freorder-functions @gol -+-frerun-cse-after-loop @gol -+-fsched-interblock -fsched-spec @gol -+-fschedule-insns -fschedule-insns2 @gol -+-fstrict-aliasing -fstrict-overflow @gol -+-ftree-switch-conversion @gol -+-ftree-pre @gol -+-ftree-vrp} -+ -+Please note the warning under @option{-fgcse} about -+invoking @option{-O2} on programs that use computed gotos. -+ -+@item -O3 -+@opindex O3 -+Optimize yet more. @option{-O3} turns on all optimizations specified -+by @option{-O2} and also turns on the @option{-finline-functions}, -+@option{-funswitch-loops}, @option{-fpredictive-commoning}, -+@option{-fgcse-after-reload} and @option{-ftree-vectorize} options. -+ -+@item -O0 -+@opindex O0 -+Reduce compilation time and make debugging produce the expected -+results. This is the default. -+ -+@item -Os -+@opindex Os -+Optimize for size. @option{-Os} enables all @option{-O2} optimizations that -+do not typically increase code size. It also performs further -+optimizations designed to reduce code size. -+ -+@option{-Os} disables the following optimization flags: -+@gccoptlist{-falign-functions -falign-jumps -falign-loops @gol -+-falign-labels -freorder-blocks -freorder-blocks-and-partition @gol -+-fprefetch-loop-arrays -ftree-vect-loop-version} -+ -+If you use multiple @option{-O} options, with or without level numbers, -+the last such option is the one that is effective. -+@end table -+ -+Options of the form @option{-f@var{flag}} specify machine-independent -+flags. Most flags have both positive and negative forms; the negative -+form of @option{-ffoo} would be @option{-fno-foo}. In the table -+below, only one of the forms is listed---the one you typically will -+use. You can figure out the other form by either removing @samp{no-} -+or adding it. -+ -+The following options control specific optimizations. They are either -+activated by @option{-O} options or are related to ones that are. You -+can use the following flags in the rare cases when ``fine-tuning'' of -+optimizations to be performed is desired. -+ -+@table @gcctabopt -+@item -fno-default-inline -+@opindex fno-default-inline -+Do not make member functions inline by default merely because they are -+defined inside the class scope (C++ only). Otherwise, when you specify -+@w{@option{-O}}, member functions defined inside class scope are compiled -+inline by default; i.e., you don't need to add @samp{inline} in front of -+the member function name. -+ -+@item -fno-defer-pop -+@opindex fno-defer-pop -+Always pop the arguments to each function call as soon as that function -+returns. For machines which must pop arguments after a function call, -+the compiler normally lets arguments accumulate on the stack for several -+function calls and pops them all at once. -+ -+Disabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fforward-propagate -+@opindex fforward-propagate -+Perform a forward propagation pass on RTL@. The pass tries to combine two -+instructions and checks if the result can be simplified. If loop unrolling -+is active, two passes are performed and the second is scheduled after -+loop unrolling. -+ -+This option is enabled by default at optimization levels @option{-O2}, -+@option{-O3}, @option{-Os}. -+ -+@item -fomit-frame-pointer -+@opindex fomit-frame-pointer -+Don't keep the frame pointer in a register for functions that -+don't need one. This avoids the instructions to save, set up and -+restore frame pointers; it also makes an extra register available -+in many functions. @strong{It also makes debugging impossible on -+some machines.} -+ -+On some machines, such as the VAX, this flag has no effect, because -+the standard calling sequence automatically handles the frame pointer -+and nothing is saved by pretending it doesn't exist. The -+machine-description macro @code{FRAME_POINTER_REQUIRED} controls -+whether a target machine supports this flag. @xref{Registers,,Register -+Usage, gccint, GNU Compiler Collection (GCC) Internals}. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -foptimize-sibling-calls -+@opindex foptimize-sibling-calls -+Optimize sibling and tail recursive calls. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fno-inline -+@opindex fno-inline -+Don't pay attention to the @code{inline} keyword. Normally this option -+is used to keep the compiler from expanding any functions inline. -+Note that if you are not optimizing, no functions can be expanded inline. -+ -+@item -finline-small-functions -+@opindex finline-small-functions -+Integrate functions into their callers when their body is smaller than expected -+function call code (so overall size of program gets smaller). The compiler -+heuristically decides which functions are simple enough to be worth integrating -+in this way. -+ -+Enabled at level @option{-O2}. -+ -+@item -findirect-inlining -+@opindex findirect-inlining -+Inline also indirect calls that are discovered to be known at compile -+time thanks to previous inlining. This option has any effect only -+when inlining itself is turned on by the @option{-finline-functions} -+or @option{-finline-small-functions} options. -+ -+Enabled at level @option{-O2}. -+ -+@item -finline-functions -+@opindex finline-functions -+Integrate all simple functions into their callers. The compiler -+heuristically decides which functions are simple enough to be worth -+integrating in this way. -+ -+If all calls to a given function are integrated, and the function is -+declared @code{static}, then the function is normally not output as -+assembler code in its own right. -+ -+Enabled at level @option{-O3}. -+ -+@item -finline-functions-called-once -+@opindex finline-functions-called-once -+Consider all @code{static} functions called once for inlining into their -+caller even if they are not marked @code{inline}. If a call to a given -+function is integrated, then the function is not output as assembler code -+in its own right. -+ -+Enabled at levels @option{-O1}, @option{-O2}, @option{-O3} and @option{-Os}. -+ -+@item -fearly-inlining -+@opindex fearly-inlining -+Inline functions marked by @code{always_inline} and functions whose body seems -+smaller than the function call overhead early before doing -+@option{-fprofile-generate} instrumentation and real inlining pass. Doing so -+makes profiling significantly cheaper and usually inlining faster on programs -+having large chains of nested wrapper functions. -+ -+Enabled by default. -+ -+@item -finline-limit=@var{n} -+@opindex finline-limit -+By default, GCC limits the size of functions that can be inlined. This flag -+allows coarse control of this limit. @var{n} is the size of functions that -+can be inlined in number of pseudo instructions. -+ -+Inlining is actually controlled by a number of parameters, which may be -+specified individually by using @option{--param @var{name}=@var{value}}. -+The @option{-finline-limit=@var{n}} option sets some of these parameters -+as follows: -+ -+@table @gcctabopt -+@item max-inline-insns-single -+is set to @var{n}/2. -+@item max-inline-insns-auto -+is set to @var{n}/2. -+@end table -+ -+See below for a documentation of the individual -+parameters controlling inlining and for the defaults of these parameters. -+ -+@emph{Note:} there may be no value to @option{-finline-limit} that results -+in default behavior. -+ -+@emph{Note:} pseudo instruction represents, in this particular context, an -+abstract measurement of function's size. In no way does it represent a count -+of assembly instructions and as such its exact meaning might change from one -+release to an another. -+ -+@item -fkeep-inline-functions -+@opindex fkeep-inline-functions -+In C, emit @code{static} functions that are declared @code{inline} -+into the object file, even if the function has been inlined into all -+of its callers. This switch does not affect functions using the -+@code{extern inline} extension in GNU C89@. In C++, emit any and all -+inline functions into the object file. -+ -+@item -fkeep-static-consts -+@opindex fkeep-static-consts -+Emit variables declared @code{static const} when optimization isn't turned -+on, even if the variables aren't referenced. -+ -+GCC enables this option by default. If you want to force the compiler to -+check if the variable was referenced, regardless of whether or not -+optimization is turned on, use the @option{-fno-keep-static-consts} option. -+ -+@item -fmerge-constants -+@opindex fmerge-constants -+Attempt to merge identical constants (string constants and floating point -+constants) across compilation units. -+ -+This option is the default for optimized compilation if the assembler and -+linker support it. Use @option{-fno-merge-constants} to inhibit this -+behavior. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fmerge-all-constants -+@opindex fmerge-all-constants -+Attempt to merge identical constants and identical variables. -+ -+This option implies @option{-fmerge-constants}. In addition to -+@option{-fmerge-constants} this considers e.g.@: even constant initialized -+arrays or initialized constant variables with integral or floating point -+types. Languages like C or C++ require each variable, including multiple -+instances of the same variable in recursive calls, to have distinct locations, -+so using this option will result in non-conforming -+behavior. -+ -+@item -fmodulo-sched -+@opindex fmodulo-sched -+Perform swing modulo scheduling immediately before the first scheduling -+pass. This pass looks at innermost loops and reorders their -+instructions by overlapping different iterations. -+ -+@item -fmodulo-sched-allow-regmoves -+@opindex fmodulo-sched-allow-regmoves -+Perform more aggressive SMS based modulo scheduling with register moves -+allowed. By setting this flag certain anti-dependences edges will be -+deleted which will trigger the generation of reg-moves based on the -+life-range analysis. This option is effective only with -+@option{-fmodulo-sched} enabled. -+ -+@item -fno-branch-count-reg -+@opindex fno-branch-count-reg -+Do not use ``decrement and branch'' instructions on a count register, -+but instead generate a sequence of instructions that decrement a -+register, compare it against zero, then branch based upon the result. -+This option is only meaningful on architectures that support such -+instructions, which include x86, PowerPC, IA-64 and S/390. -+ -+The default is @option{-fbranch-count-reg}. -+ -+@item -fno-function-cse -+@opindex fno-function-cse -+Do not put function addresses in registers; make each instruction that -+calls a constant function contain the function's address explicitly. -+ -+This option results in less efficient code, but some strange hacks -+that alter the assembler output may be confused by the optimizations -+performed when this option is not used. -+ -+The default is @option{-ffunction-cse} -+ -+@item -fno-zero-initialized-in-bss -+@opindex fno-zero-initialized-in-bss -+If the target supports a BSS section, GCC by default puts variables that -+are initialized to zero into BSS@. This can save space in the resulting -+code. -+ -+This option turns off this behavior because some programs explicitly -+rely on variables going to the data section. E.g., so that the -+resulting executable can find the beginning of that section and/or make -+assumptions based on that. -+ -+The default is @option{-fzero-initialized-in-bss}. -+ -+@item -fmudflap -fmudflapth -fmudflapir -+@opindex fmudflap -+@opindex fmudflapth -+@opindex fmudflapir -+@cindex bounds checking -+@cindex mudflap -+For front-ends that support it (C and C++), instrument all risky -+pointer/array dereferencing operations, some standard library -+string/heap functions, and some other associated constructs with -+range/validity tests. Modules so instrumented should be immune to -+buffer overflows, invalid heap use, and some other classes of C/C++ -+programming errors. The instrumentation relies on a separate runtime -+library (@file{libmudflap}), which will be linked into a program if -+@option{-fmudflap} is given at link time. Run-time behavior of the -+instrumented program is controlled by the @env{MUDFLAP_OPTIONS} -+environment variable. See @code{env MUDFLAP_OPTIONS=-help a.out} -+for its options. -+ -+Use @option{-fmudflapth} instead of @option{-fmudflap} to compile and to -+link if your program is multi-threaded. Use @option{-fmudflapir}, in -+addition to @option{-fmudflap} or @option{-fmudflapth}, if -+instrumentation should ignore pointer reads. This produces less -+instrumentation (and therefore faster execution) and still provides -+some protection against outright memory corrupting writes, but allows -+erroneously read data to propagate within a program. -+ -+@item -fthread-jumps -+@opindex fthread-jumps -+Perform optimizations where we check to see if a jump branches to a -+location where another comparison subsumed by the first is found. If -+so, the first branch is redirected to either the destination of the -+second branch or a point immediately following it, depending on whether -+the condition is known to be true or false. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fsplit-wide-types -+@opindex fsplit-wide-types -+When using a type that occupies multiple registers, such as @code{long -+long} on a 32-bit system, split the registers apart and allocate them -+independently. This normally generates better code for those types, -+but may make debugging more difficult. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, -+@option{-Os}. -+ -+@item -fcse-follow-jumps -+@opindex fcse-follow-jumps -+In common subexpression elimination (CSE), scan through jump instructions -+when the target of the jump is not reached by any other path. For -+example, when CSE encounters an @code{if} statement with an -+@code{else} clause, CSE will follow the jump when the condition -+tested is false. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fcse-skip-blocks -+@opindex fcse-skip-blocks -+This is similar to @option{-fcse-follow-jumps}, but causes CSE to -+follow jumps which conditionally skip over blocks. When CSE -+encounters a simple @code{if} statement with no else clause, -+@option{-fcse-skip-blocks} causes CSE to follow the jump around the -+body of the @code{if}. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -frerun-cse-after-loop -+@opindex frerun-cse-after-loop -+Re-run common subexpression elimination after loop optimizations has been -+performed. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fgcse -+@opindex fgcse -+Perform a global common subexpression elimination pass. -+This pass also performs global constant and copy propagation. -+ -+@emph{Note:} When compiling a program using computed gotos, a GCC -+extension, you may get better runtime performance if you disable -+the global common subexpression elimination pass by adding -+@option{-fno-gcse} to the command line. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fgcse-lm -+@opindex fgcse-lm -+When @option{-fgcse-lm} is enabled, global common subexpression elimination will -+attempt to move loads which are only killed by stores into themselves. This -+allows a loop containing a load/store sequence to be changed to a load outside -+the loop, and a copy/store within the loop. -+ -+Enabled by default when gcse is enabled. -+ -+@item -fgcse-sm -+@opindex fgcse-sm -+When @option{-fgcse-sm} is enabled, a store motion pass is run after -+global common subexpression elimination. This pass will attempt to move -+stores out of loops. When used in conjunction with @option{-fgcse-lm}, -+loops containing a load/store sequence can be changed to a load before -+the loop and a store after the loop. -+ -+Not enabled at any optimization level. -+ -+@item -fgcse-las -+@opindex fgcse-las -+When @option{-fgcse-las} is enabled, the global common subexpression -+elimination pass eliminates redundant loads that come after stores to the -+same memory location (both partial and full redundancies). -+ -+Not enabled at any optimization level. -+ -+@item -fgcse-after-reload -+@opindex fgcse-after-reload -+When @option{-fgcse-after-reload} is enabled, a redundant load elimination -+pass is performed after reload. The purpose of this pass is to cleanup -+redundant spilling. -+ -+@item -funsafe-loop-optimizations -+@opindex funsafe-loop-optimizations -+If given, the loop optimizer will assume that loop indices do not -+overflow, and that the loops with nontrivial exit condition are not -+infinite. This enables a wider range of loop optimizations even if -+the loop optimizer itself cannot prove that these assumptions are valid. -+Using @option{-Wunsafe-loop-optimizations}, the compiler will warn you -+if it finds this kind of loop. -+ -+@item -fcrossjumping -+@opindex fcrossjumping -+Perform cross-jumping transformation. This transformation unifies equivalent code and save code size. The -+resulting code may or may not perform better than without cross-jumping. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fauto-inc-dec -+@opindex fauto-inc-dec -+Combine increments or decrements of addresses with memory accesses. -+This pass is always skipped on architectures that do not have -+instructions to support this. Enabled by default at @option{-O} and -+higher on architectures that support this. -+ -+@item -fdce -+@opindex fdce -+Perform dead code elimination (DCE) on RTL@. -+Enabled by default at @option{-O} and higher. -+ -+@item -fdse -+@opindex fdse -+Perform dead store elimination (DSE) on RTL@. -+Enabled by default at @option{-O} and higher. -+ -+@item -fif-conversion -+@opindex fif-conversion -+Attempt to transform conditional jumps into branch-less equivalents. This -+include use of conditional moves, min, max, set flags and abs instructions, and -+some tricks doable by standard arithmetics. The use of conditional execution -+on chips where it is available is controlled by @code{if-conversion2}. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fif-conversion2 -+@opindex fif-conversion2 -+Use conditional execution (where available) to transform conditional jumps into -+branch-less equivalents. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fdelete-null-pointer-checks -+@opindex fdelete-null-pointer-checks -+Use global dataflow analysis to identify and eliminate useless checks -+for null pointers. The compiler assumes that dereferencing a null -+pointer would have halted the program. If a pointer is checked after -+it has already been dereferenced, it cannot be null. -+ -+In some environments, this assumption is not true, and programs can -+safely dereference null pointers. Use -+@option{-fno-delete-null-pointer-checks} to disable this optimization -+for programs which depend on that behavior. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fexpensive-optimizations -+@opindex fexpensive-optimizations -+Perform a number of minor optimizations that are relatively expensive. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -foptimize-register-move -+@itemx -fregmove -+@opindex foptimize-register-move -+@opindex fregmove -+Attempt to reassign register numbers in move instructions and as -+operands of other simple instructions in order to maximize the amount of -+register tying. This is especially helpful on machines with two-operand -+instructions. -+ -+Note @option{-fregmove} and @option{-foptimize-register-move} are the same -+optimization. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fira-algorithm=@var{algorithm} -+Use specified coloring algorithm for the integrated register -+allocator. The @var{algorithm} argument should be @code{priority} or -+@code{CB}. The first algorithm specifies Chow's priority coloring, -+the second one specifies Chaitin-Briggs coloring. The second -+algorithm can be unimplemented for some architectures. If it is -+implemented, it is the default because Chaitin-Briggs coloring as a -+rule generates a better code. -+ -+@item -fira-region=@var{region} -+Use specified regions for the integrated register allocator. The -+@var{region} argument should be one of @code{all}, @code{mixed}, or -+@code{one}. The first value means using all loops as register -+allocation regions, the second value which is the default means using -+all loops except for loops with small register pressure as the -+regions, and third one means using all function as a single region. -+The first value can give best result for machines with small size and -+irregular register set, the third one results in faster and generates -+decent code and the smallest size code, and the default value usually -+give the best results in most cases and for most architectures. -+ -+@item -fira-coalesce -+@opindex fira-coalesce -+Do optimistic register coalescing. This option might be profitable for -+architectures with big regular register files. -+ -+@item -fno-ira-share-save-slots -+@opindex fno-ira-share-save-slots -+Switch off sharing stack slots used for saving call used hard -+registers living through a call. Each hard register will get a -+separate stack slot and as a result function stack frame will be -+bigger. -+ -+@item -fno-ira-share-spill-slots -+@opindex fno-ira-share-spill-slots -+Switch off sharing stack slots allocated for pseudo-registers. Each -+pseudo-register which did not get a hard register will get a separate -+stack slot and as a result function stack frame will be bigger. -+ -+@item -fira-verbose=@var{n} -+@opindex fira-verbose -+Set up how verbose dump file for the integrated register allocator -+will be. Default value is 5. If the value is greater or equal to 10, -+the dump file will be stderr as if the value were @var{n} minus 10. -+ -+@item -fdelayed-branch -+@opindex fdelayed-branch -+If supported for the target machine, attempt to reorder instructions -+to exploit instruction slots available after delayed branch -+instructions. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fschedule-insns -+@opindex fschedule-insns -+If supported for the target machine, attempt to reorder instructions to -+eliminate execution stalls due to required data being unavailable. This -+helps machines that have slow floating point or memory load instructions -+by allowing other instructions to be issued until the result of the load -+or floating point instruction is required. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fschedule-insns2 -+@opindex fschedule-insns2 -+Similar to @option{-fschedule-insns}, but requests an additional pass of -+instruction scheduling after register allocation has been done. This is -+especially useful on machines with a relatively small number of -+registers and where memory load instructions take more than one cycle. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fno-sched-interblock -+@opindex fno-sched-interblock -+Don't schedule instructions across basic blocks. This is normally -+enabled by default when scheduling before register allocation, i.e.@: -+with @option{-fschedule-insns} or at @option{-O2} or higher. -+ -+@item -fno-sched-spec -+@opindex fno-sched-spec -+Don't allow speculative motion of non-load instructions. This is normally -+enabled by default when scheduling before register allocation, i.e.@: -+with @option{-fschedule-insns} or at @option{-O2} or higher. -+ -+@item -fsched-spec-load -+@opindex fsched-spec-load -+Allow speculative motion of some load instructions. This only makes -+sense when scheduling before register allocation, i.e.@: with -+@option{-fschedule-insns} or at @option{-O2} or higher. -+ -+@item -fsched-spec-load-dangerous -+@opindex fsched-spec-load-dangerous -+Allow speculative motion of more load instructions. This only makes -+sense when scheduling before register allocation, i.e.@: with -+@option{-fschedule-insns} or at @option{-O2} or higher. -+ -+@item -fsched-stalled-insns -+@itemx -fsched-stalled-insns=@var{n} -+@opindex fsched-stalled-insns -+Define how many insns (if any) can be moved prematurely from the queue -+of stalled insns into the ready list, during the second scheduling pass. -+@option{-fno-sched-stalled-insns} means that no insns will be moved -+prematurely, @option{-fsched-stalled-insns=0} means there is no limit -+on how many queued insns can be moved prematurely. -+@option{-fsched-stalled-insns} without a value is equivalent to -+@option{-fsched-stalled-insns=1}. -+ -+@item -fsched-stalled-insns-dep -+@itemx -fsched-stalled-insns-dep=@var{n} -+@opindex fsched-stalled-insns-dep -+Define how many insn groups (cycles) will be examined for a dependency -+on a stalled insn that is candidate for premature removal from the queue -+of stalled insns. This has an effect only during the second scheduling pass, -+and only if @option{-fsched-stalled-insns} is used. -+@option{-fno-sched-stalled-insns-dep} is equivalent to -+@option{-fsched-stalled-insns-dep=0}. -+@option{-fsched-stalled-insns-dep} without a value is equivalent to -+@option{-fsched-stalled-insns-dep=1}. -+ -+@item -fsched2-use-superblocks -+@opindex fsched2-use-superblocks -+When scheduling after register allocation, do use superblock scheduling -+algorithm. Superblock scheduling allows motion across basic block boundaries -+resulting on faster schedules. This option is experimental, as not all machine -+descriptions used by GCC model the CPU closely enough to avoid unreliable -+results from the algorithm. -+ -+This only makes sense when scheduling after register allocation, i.e.@: with -+@option{-fschedule-insns2} or at @option{-O2} or higher. -+ -+@item -fsched2-use-traces -+@opindex fsched2-use-traces -+Use @option{-fsched2-use-superblocks} algorithm when scheduling after register -+allocation and additionally perform code duplication in order to increase the -+size of superblocks using tracer pass. See @option{-ftracer} for details on -+trace formation. -+ -+This mode should produce faster but significantly longer programs. Also -+without @option{-fbranch-probabilities} the traces constructed may not -+match the reality and hurt the performance. This only makes -+sense when scheduling after register allocation, i.e.@: with -+@option{-fschedule-insns2} or at @option{-O2} or higher. -+ -+@item -fsee -+@opindex fsee -+Eliminate redundant sign extension instructions and move the non-redundant -+ones to optimal placement using lazy code motion (LCM). -+ -+@item -freschedule-modulo-scheduled-loops -+@opindex freschedule-modulo-scheduled-loops -+The modulo scheduling comes before the traditional scheduling, if a loop -+was modulo scheduled we may want to prevent the later scheduling passes -+from changing its schedule, we use this option to control that. -+ -+@item -fselective-scheduling -+@opindex fselective-scheduling -+Schedule instructions using selective scheduling algorithm. Selective -+scheduling runs instead of the first scheduler pass. -+ -+@item -fselective-scheduling2 -+@opindex fselective-scheduling2 -+Schedule instructions using selective scheduling algorithm. Selective -+scheduling runs instead of the second scheduler pass. -+ -+@item -fsel-sched-pipelining -+@opindex fsel-sched-pipelining -+Enable software pipelining of innermost loops during selective scheduling. -+This option has no effect until one of @option{-fselective-scheduling} or -+@option{-fselective-scheduling2} is turned on. -+ -+@item -fsel-sched-pipelining-outer-loops -+@opindex fsel-sched-pipelining-outer-loops -+When pipelining loops during selective scheduling, also pipeline outer loops. -+This option has no effect until @option{-fsel-sched-pipelining} is turned on. -+ -+@item -fcaller-saves -+@opindex fcaller-saves -+Enable values to be allocated in registers that will be clobbered by -+function calls, by emitting extra instructions to save and restore the -+registers around such calls. Such allocation is done only when it -+seems to result in better code than would otherwise be produced. -+ -+This option is always enabled by default on certain machines, usually -+those which have no call-preserved registers to use instead. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fconserve-stack -+@opindex fconserve-stack -+Attempt to minimize stack usage. The compiler will attempt to use less -+stack space, even if that makes the program slower. This option -+implies setting the @option{large-stack-frame} parameter to 100 -+and the @option{large-stack-frame-growth} parameter to 400. -+ -+@item -ftree-reassoc -+@opindex ftree-reassoc -+Perform reassociation on trees. This flag is enabled by default -+at @option{-O} and higher. -+ -+@item -ftree-pre -+@opindex ftree-pre -+Perform partial redundancy elimination (PRE) on trees. This flag is -+enabled by default at @option{-O2} and @option{-O3}. -+ -+@item -ftree-fre -+@opindex ftree-fre -+Perform full redundancy elimination (FRE) on trees. The difference -+between FRE and PRE is that FRE only considers expressions -+that are computed on all paths leading to the redundant computation. -+This analysis is faster than PRE, though it exposes fewer redundancies. -+This flag is enabled by default at @option{-O} and higher. -+ -+@item -ftree-copy-prop -+@opindex ftree-copy-prop -+Perform copy propagation on trees. This pass eliminates unnecessary -+copy operations. This flag is enabled by default at @option{-O} and -+higher. -+ -+@item -fipa-pure-const -+@opindex fipa-pure-const -+Discover which functions are pure or constant. -+Enabled by default at @option{-O} and higher. -+ -+@item -fipa-reference -+@opindex fipa-reference -+Discover which static variables do not escape cannot escape the -+compilation unit. -+Enabled by default at @option{-O} and higher. -+ -+@item -fipa-struct-reorg -+@opindex fipa-struct-reorg -+Perform structure reorganization optimization, that change C-like structures -+layout in order to better utilize spatial locality. This transformation is -+affective for programs containing arrays of structures. Available in two -+compilation modes: profile-based (enabled with @option{-fprofile-generate}) -+or static (which uses built-in heuristics). Require @option{-fipa-type-escape} -+to provide the safety of this transformation. It works only in whole program -+mode, so it requires @option{-fwhole-program} and @option{-combine} to be -+enabled. Structures considered @samp{cold} by this transformation are not -+affected (see @option{--param struct-reorg-cold-struct-ratio=@var{value}}). -+ -+With this flag, the program debug info reflects a new structure layout. -+ -+@item -fipa-pta -+@opindex fipa-pta -+Perform interprocedural pointer analysis. This option is experimental -+and does not affect generated code. -+ -+@item -fipa-cp -+@opindex fipa-cp -+Perform interprocedural constant propagation. -+This optimization analyzes the program to determine when values passed -+to functions are constants and then optimizes accordingly. -+This optimization can substantially increase performance -+if the application has constants passed to functions. -+This flag is enabled by default at @option{-O2}, @option{-Os} and @option{-O3}. -+ -+@item -fipa-cp-clone -+@opindex fipa-cp-clone -+Perform function cloning to make interprocedural constant propagation stronger. -+When enabled, interprocedural constant propagation will perform function cloning -+when externally visible function can be called with constant arguments. -+Because this optimization can create multiple copies of functions, -+it may significantly increase code size -+(see @option{--param ipcp-unit-growth=@var{value}}). -+This flag is enabled by default at @option{-O3}. -+ -+@item -fipa-matrix-reorg -+@opindex fipa-matrix-reorg -+Perform matrix flattening and transposing. -+Matrix flattening tries to replace a m-dimensional matrix -+with its equivalent n-dimensional matrix, where n < m. -+This reduces the level of indirection needed for accessing the elements -+of the matrix. The second optimization is matrix transposing that -+attempts to change the order of the matrix's dimensions in order to -+improve cache locality. -+Both optimizations need the @option{-fwhole-program} flag. -+Transposing is enabled only if profiling information is available. -+ -+ -+@item -ftree-sink -+@opindex ftree-sink -+Perform forward store motion on trees. This flag is -+enabled by default at @option{-O} and higher. -+ -+@item -ftree-ccp -+@opindex ftree-ccp -+Perform sparse conditional constant propagation (CCP) on trees. This -+pass only operates on local scalar variables and is enabled by default -+at @option{-O} and higher. -+ -+@item -ftree-switch-conversion -+Perform conversion of simple initializations in a switch to -+initializations from a scalar array. This flag is enabled by default -+at @option{-O2} and higher. -+ -+@item -ftree-dce -+@opindex ftree-dce -+Perform dead code elimination (DCE) on trees. This flag is enabled by -+default at @option{-O} and higher. -+ -+@item -ftree-builtin-call-dce -+@opindex ftree-builtin-call-dce -+Perform conditional dead code elimination (DCE) for calls to builtin functions -+that may set @code{errno} but are otherwise side-effect free. This flag is -+enabled by default at @option{-O2} and higher if @option{-Os} is not also -+specified. -+ -+@item -ftree-dominator-opts -+@opindex ftree-dominator-opts -+Perform a variety of simple scalar cleanups (constant/copy -+propagation, redundancy elimination, range propagation and expression -+simplification) based on a dominator tree traversal. This also -+performs jump threading (to reduce jumps to jumps). This flag is -+enabled by default at @option{-O} and higher. -+ -+@item -ftree-dse -+@opindex ftree-dse -+Perform dead store elimination (DSE) on trees. A dead store is a store into -+a memory location which will later be overwritten by another store without -+any intervening loads. In this case the earlier store can be deleted. This -+flag is enabled by default at @option{-O} and higher. -+ -+@item -ftree-ch -+@opindex ftree-ch -+Perform loop header copying on trees. This is beneficial since it increases -+effectiveness of code motion optimizations. It also saves one jump. This flag -+is enabled by default at @option{-O} and higher. It is not enabled -+for @option{-Os}, since it usually increases code size. -+ -+@item -ftree-loop-optimize -+@opindex ftree-loop-optimize -+Perform loop optimizations on trees. This flag is enabled by default -+at @option{-O} and higher. -+ -+@item -ftree-loop-linear -+@opindex ftree-loop-linear -+Perform linear loop transformations on tree. This flag can improve cache -+performance and allow further loop optimizations to take place. -+ -+@item -floop-interchange -+Perform loop interchange transformations on loops. Interchanging two -+nested loops switches the inner and outer loops. For example, given a -+loop like: -+@smallexample -+DO J = 1, M -+ DO I = 1, N -+ A(J, I) = A(J, I) * C -+ ENDDO -+ENDDO -+@end smallexample -+loop interchange will transform the loop as if the user had written: -+@smallexample -+DO I = 1, N -+ DO J = 1, M -+ A(J, I) = A(J, I) * C -+ ENDDO -+ENDDO -+@end smallexample -+which can be beneficial when @code{N} is larger than the caches, -+because in Fortran, the elements of an array are stored in memory -+contiguously by column, and the original loop iterates over rows, -+potentially creating at each access a cache miss. This optimization -+applies to all the languages supported by GCC and is not limited to -+Fortran. To use this code transformation, GCC has to be configured -+with @option{--with-ppl} and @option{--with-cloog} to enable the -+Graphite loop transformation infrastructure. -+ -+@item -floop-strip-mine -+Perform loop strip mining transformations on loops. Strip mining -+splits a loop into two nested loops. The outer loop has strides -+equal to the strip size and the inner loop has strides of the -+original loop within a strip. For example, given a loop like: -+@smallexample -+DO I = 1, N -+ A(I) = A(I) + C -+ENDDO -+@end smallexample -+loop strip mining will transform the loop as if the user had written: -+@smallexample -+DO II = 1, N, 4 -+ DO I = II, min (II + 3, N) -+ A(I) = A(I) + C -+ ENDDO -+ENDDO -+@end smallexample -+This optimization applies to all the languages supported by GCC and is -+not limited to Fortran. To use this code transformation, GCC has to -+be configured with @option{--with-ppl} and @option{--with-cloog} to -+enable the Graphite loop transformation infrastructure. -+ -+@item -floop-block -+Perform loop blocking transformations on loops. Blocking strip mines -+each loop in the loop nest such that the memory accesses of the -+element loops fit inside caches. For example, given a loop like: -+@smallexample -+DO I = 1, N -+ DO J = 1, M -+ A(J, I) = B(I) + C(J) -+ ENDDO -+ENDDO -+@end smallexample -+loop blocking will transform the loop as if the user had written: -+@smallexample -+DO II = 1, N, 64 -+ DO JJ = 1, M, 64 -+ DO I = II, min (II + 63, N) -+ DO J = JJ, min (JJ + 63, M) -+ A(J, I) = B(I) + C(J) -+ ENDDO -+ ENDDO -+ ENDDO -+ENDDO -+@end smallexample -+which can be beneficial when @code{M} is larger than the caches, -+because the innermost loop will iterate over a smaller amount of data -+that can be kept in the caches. This optimization applies to all the -+languages supported by GCC and is not limited to Fortran. To use this -+code transformation, GCC has to be configured with @option{--with-ppl} -+and @option{--with-cloog} to enable the Graphite loop transformation -+infrastructure. -+ -+@item -fcheck-data-deps -+@opindex fcheck-data-deps -+Compare the results of several data dependence analyzers. This option -+is used for debugging the data dependence analyzers. -+ -+@item -ftree-loop-distribution -+Perform loop distribution. This flag can improve cache performance on -+big loop bodies and allow further loop optimizations, like -+parallelization or vectorization, to take place. For example, the loop -+@smallexample -+DO I = 1, N -+ A(I) = B(I) + C -+ D(I) = E(I) * F -+ENDDO -+@end smallexample -+is transformed to -+@smallexample -+DO I = 1, N -+ A(I) = B(I) + C -+ENDDO -+DO I = 1, N -+ D(I) = E(I) * F -+ENDDO -+@end smallexample -+ -+@item -ftree-loop-im -+@opindex ftree-loop-im -+Perform loop invariant motion on trees. This pass moves only invariants that -+would be hard to handle at RTL level (function calls, operations that expand to -+nontrivial sequences of insns). With @option{-funswitch-loops} it also moves -+operands of conditions that are invariant out of the loop, so that we can use -+just trivial invariantness analysis in loop unswitching. The pass also includes -+store motion. -+ -+@item -ftree-loop-ivcanon -+@opindex ftree-loop-ivcanon -+Create a canonical counter for number of iterations in the loop for that -+determining number of iterations requires complicated analysis. Later -+optimizations then may determine the number easily. Useful especially -+in connection with unrolling. -+ -+@item -fivopts -+@opindex fivopts -+Perform induction variable optimizations (strength reduction, induction -+variable merging and induction variable elimination) on trees. -+ -+@item -ftree-parallelize-loops=n -+@opindex ftree-parallelize-loops -+Parallelize loops, i.e., split their iteration space to run in n threads. -+This is only possible for loops whose iterations are independent -+and can be arbitrarily reordered. The optimization is only -+profitable on multiprocessor machines, for loops that are CPU-intensive, -+rather than constrained e.g.@: by memory bandwidth. This option -+implies @option{-pthread}, and thus is only supported on targets -+that have support for @option{-pthread}. -+ -+@item -ftree-sra -+@opindex ftree-sra -+Perform scalar replacement of aggregates. This pass replaces structure -+references with scalars to prevent committing structures to memory too -+early. This flag is enabled by default at @option{-O} and higher. -+ -+@item -ftree-copyrename -+@opindex ftree-copyrename -+Perform copy renaming on trees. This pass attempts to rename compiler -+temporaries to other variables at copy locations, usually resulting in -+variable names which more closely resemble the original variables. This flag -+is enabled by default at @option{-O} and higher. -+ -+@item -ftree-ter -+@opindex ftree-ter -+Perform temporary expression replacement during the SSA->normal phase. Single -+use/single def temporaries are replaced at their use location with their -+defining expression. This results in non-GIMPLE code, but gives the expanders -+much more complex trees to work on resulting in better RTL generation. This is -+enabled by default at @option{-O} and higher. -+ -+@item -ftree-vectorize -+@opindex ftree-vectorize -+Perform loop vectorization on trees. This flag is enabled by default at -+@option{-O3}. -+ -+@item -ftree-vect-loop-version -+@opindex ftree-vect-loop-version -+Perform loop versioning when doing loop vectorization on trees. When a loop -+appears to be vectorizable except that data alignment or data dependence cannot -+be determined at compile time then vectorized and non-vectorized versions of -+the loop are generated along with runtime checks for alignment or dependence -+to control which version is executed. This option is enabled by default -+except at level @option{-Os} where it is disabled. -+ -+@item -fvect-cost-model -+@opindex fvect-cost-model -+Enable cost model for vectorization. -+ -+@item -ftree-vrp -+@opindex ftree-vrp -+Perform Value Range Propagation on trees. This is similar to the -+constant propagation pass, but instead of values, ranges of values are -+propagated. This allows the optimizers to remove unnecessary range -+checks like array bound checks and null pointer checks. This is -+enabled by default at @option{-O2} and higher. Null pointer check -+elimination is only done if @option{-fdelete-null-pointer-checks} is -+enabled. -+ -+@item -ftracer -+@opindex ftracer -+Perform tail duplication to enlarge superblock size. This transformation -+simplifies the control flow of the function allowing other optimizations to do -+better job. -+ -+@item -funroll-loops -+@opindex funroll-loops -+Unroll loops whose number of iterations can be determined at compile -+time or upon entry to the loop. @option{-funroll-loops} implies -+@option{-frerun-cse-after-loop}. This option makes code larger, -+and may or may not make it run faster. -+ -+@item -funroll-all-loops -+@opindex funroll-all-loops -+Unroll all loops, even if their number of iterations is uncertain when -+the loop is entered. This usually makes programs run more slowly. -+@option{-funroll-all-loops} implies the same options as -+@option{-funroll-loops}, -+ -+@item -fsplit-ivs-in-unroller -+@opindex fsplit-ivs-in-unroller -+Enables expressing of values of induction variables in later iterations -+of the unrolled loop using the value in the first iteration. This breaks -+long dependency chains, thus improving efficiency of the scheduling passes. -+ -+Combination of @option{-fweb} and CSE is often sufficient to obtain the -+same effect. However in cases the loop body is more complicated than -+a single basic block, this is not reliable. It also does not work at all -+on some of the architectures due to restrictions in the CSE pass. -+ -+This optimization is enabled by default. -+ -+@item -fvariable-expansion-in-unroller -+@opindex fvariable-expansion-in-unroller -+With this option, the compiler will create multiple copies of some -+local variables when unrolling a loop which can result in superior code. -+ -+@item -fpredictive-commoning -+@opindex fpredictive-commoning -+Perform predictive commoning optimization, i.e., reusing computations -+(especially memory loads and stores) performed in previous -+iterations of loops. -+ -+This option is enabled at level @option{-O3}. -+ -+@item -fprefetch-loop-arrays -+@opindex fprefetch-loop-arrays -+If supported by the target machine, generate instructions to prefetch -+memory to improve the performance of loops that access large arrays. -+ -+This option may generate better or worse code; results are highly -+dependent on the structure of loops within the source code. -+ -+Disabled at level @option{-Os}. -+ -+@item -fno-peephole -+@itemx -fno-peephole2 -+@opindex fno-peephole -+@opindex fno-peephole2 -+Disable any machine-specific peephole optimizations. The difference -+between @option{-fno-peephole} and @option{-fno-peephole2} is in how they -+are implemented in the compiler; some targets use one, some use the -+other, a few use both. -+ -+@option{-fpeephole} is enabled by default. -+@option{-fpeephole2} enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fno-guess-branch-probability -+@opindex fno-guess-branch-probability -+Do not guess branch probabilities using heuristics. -+ -+GCC will use heuristics to guess branch probabilities if they are -+not provided by profiling feedback (@option{-fprofile-arcs}). These -+heuristics are based on the control flow graph. If some branch probabilities -+are specified by @samp{__builtin_expect}, then the heuristics will be -+used to guess branch probabilities for the rest of the control flow graph, -+taking the @samp{__builtin_expect} info into account. The interactions -+between the heuristics and @samp{__builtin_expect} can be complex, and in -+some cases, it may be useful to disable the heuristics so that the effects -+of @samp{__builtin_expect} are easier to understand. -+ -+The default is @option{-fguess-branch-probability} at levels -+@option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -freorder-blocks -+@opindex freorder-blocks -+Reorder basic blocks in the compiled function in order to reduce number of -+taken branches and improve code locality. -+ -+Enabled at levels @option{-O2}, @option{-O3}. -+ -+@item -freorder-blocks-and-partition -+@opindex freorder-blocks-and-partition -+In addition to reordering basic blocks in the compiled function, in order -+to reduce number of taken branches, partitions hot and cold basic blocks -+into separate sections of the assembly and .o files, to improve -+paging and cache locality performance. -+ -+This optimization is automatically turned off in the presence of -+exception handling, for linkonce sections, for functions with a user-defined -+section attribute and on any architecture that does not support named -+sections. -+ -+@item -freorder-functions -+@opindex freorder-functions -+Reorder functions in the object file in order to -+improve code locality. This is implemented by using special -+subsections @code{.text.hot} for most frequently executed functions and -+@code{.text.unlikely} for unlikely executed functions. Reordering is done by -+the linker so object file format must support named sections and linker must -+place them in a reasonable way. -+ -+Also profile feedback must be available in to make this option effective. See -+@option{-fprofile-arcs} for details. -+ -+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fstrict-aliasing -+@opindex fstrict-aliasing -+Allow the compiler to assume the strictest aliasing rules applicable to -+the language being compiled. For C (and C++), this activates -+optimizations based on the type of expressions. In particular, an -+object of one type is assumed never to reside at the same address as an -+object of a different type, unless the types are almost the same. For -+example, an @code{unsigned int} can alias an @code{int}, but not a -+@code{void*} or a @code{double}. A character type may alias any other -+type. -+ -+@anchor{Type-punning}Pay special attention to code like this: -+@smallexample -+union a_union @{ -+ int i; -+ double d; -+@}; -+ -+int f() @{ -+ union a_union t; -+ t.d = 3.0; -+ return t.i; -+@} -+@end smallexample -+The practice of reading from a different union member than the one most -+recently written to (called ``type-punning'') is common. Even with -+@option{-fstrict-aliasing}, type-punning is allowed, provided the memory -+is accessed through the union type. So, the code above will work as -+expected. @xref{Structures unions enumerations and bit-fields -+implementation}. However, this code might not: -+@smallexample -+int f() @{ -+ union a_union t; -+ int* ip; -+ t.d = 3.0; -+ ip = &t.i; -+ return *ip; -+@} -+@end smallexample -+ -+Similarly, access by taking the address, casting the resulting pointer -+and dereferencing the result has undefined behavior, even if the cast -+uses a union type, e.g.: -+@smallexample -+int f() @{ -+ double d = 3.0; -+ return ((union a_union *) &d)->i; -+@} -+@end smallexample -+ -+The @option{-fstrict-aliasing} option is enabled at levels -+@option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fstrict-overflow -+@opindex fstrict-overflow -+Allow the compiler to assume strict signed overflow rules, depending -+on the language being compiled. For C (and C++) this means that -+overflow when doing arithmetic with signed numbers is undefined, which -+means that the compiler may assume that it will not happen. This -+permits various optimizations. For example, the compiler will assume -+that an expression like @code{i + 10 > i} will always be true for -+signed @code{i}. This assumption is only valid if signed overflow is -+undefined, as the expression is false if @code{i + 10} overflows when -+using twos complement arithmetic. When this option is in effect any -+attempt to determine whether an operation on signed numbers will -+overflow must be written carefully to not actually involve overflow. -+ -+This option also allows the compiler to assume strict pointer -+semantics: given a pointer to an object, if adding an offset to that -+pointer does not produce a pointer to the same object, the addition is -+undefined. This permits the compiler to conclude that @code{p + u > -+p} is always true for a pointer @code{p} and unsigned integer -+@code{u}. This assumption is only valid because pointer wraparound is -+undefined, as the expression is false if @code{p + u} overflows using -+twos complement arithmetic. -+ -+See also the @option{-fwrapv} option. Using @option{-fwrapv} means -+that integer signed overflow is fully defined: it wraps. When -+@option{-fwrapv} is used, there is no difference between -+@option{-fstrict-overflow} and @option{-fno-strict-overflow} for -+integers. With @option{-fwrapv} certain types of overflow are -+permitted. For example, if the compiler gets an overflow when doing -+arithmetic on constants, the overflowed value can still be used with -+@option{-fwrapv}, but not otherwise. -+ -+The @option{-fstrict-overflow} option is enabled at levels -+@option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -falign-functions -+@itemx -falign-functions=@var{n} -+@opindex falign-functions -+Align the start of functions to the next power-of-two greater than -+@var{n}, skipping up to @var{n} bytes. For instance, -+@option{-falign-functions=32} aligns functions to the next 32-byte -+boundary, but @option{-falign-functions=24} would align to the next -+32-byte boundary only if this can be done by skipping 23 bytes or less. -+ -+@option{-fno-align-functions} and @option{-falign-functions=1} are -+equivalent and mean that functions will not be aligned. -+ -+Some assemblers only support this flag when @var{n} is a power of two; -+in that case, it is rounded up. -+ -+If @var{n} is not specified or is zero, use a machine-dependent default. -+ -+Enabled at levels @option{-O2}, @option{-O3}. -+ -+@item -falign-labels -+@itemx -falign-labels=@var{n} -+@opindex falign-labels -+Align all branch targets to a power-of-two boundary, skipping up to -+@var{n} bytes like @option{-falign-functions}. This option can easily -+make code slower, because it must insert dummy operations for when the -+branch target is reached in the usual flow of the code. -+ -+@option{-fno-align-labels} and @option{-falign-labels=1} are -+equivalent and mean that labels will not be aligned. -+ -+If @option{-falign-loops} or @option{-falign-jumps} are applicable and -+are greater than this value, then their values are used instead. -+ -+If @var{n} is not specified or is zero, use a machine-dependent default -+which is very likely to be @samp{1}, meaning no alignment. -+ -+Enabled at levels @option{-O2}, @option{-O3}. -+ -+@item -falign-loops -+@itemx -falign-loops=@var{n} -+@opindex falign-loops -+Align loops to a power-of-two boundary, skipping up to @var{n} bytes -+like @option{-falign-functions}. The hope is that the loop will be -+executed many times, which will make up for any execution of the dummy -+operations. -+ -+@option{-fno-align-loops} and @option{-falign-loops=1} are -+equivalent and mean that loops will not be aligned. -+ -+If @var{n} is not specified or is zero, use a machine-dependent default. -+ -+Enabled at levels @option{-O2}, @option{-O3}. -+ -+@item -falign-jumps -+@itemx -falign-jumps=@var{n} -+@opindex falign-jumps -+Align branch targets to a power-of-two boundary, for branch targets -+where the targets can only be reached by jumping, skipping up to @var{n} -+bytes like @option{-falign-functions}. In this case, no dummy operations -+need be executed. -+ -+@option{-fno-align-jumps} and @option{-falign-jumps=1} are -+equivalent and mean that loops will not be aligned. -+ -+If @var{n} is not specified or is zero, use a machine-dependent default. -+ -+Enabled at levels @option{-O2}, @option{-O3}. -+ -+@item -funit-at-a-time -+@opindex funit-at-a-time -+This option is left for compatibility reasons. @option{-funit-at-a-time} -+has no effect, while @option{-fno-unit-at-a-time} implies -+@option{-fno-toplevel-reorder} and @option{-fno-section-anchors}. -+ -+Enabled by default. -+ -+@item -fno-toplevel-reorder -+@opindex fno-toplevel-reorder -+Do not reorder top-level functions, variables, and @code{asm} -+statements. Output them in the same order that they appear in the -+input file. When this option is used, unreferenced static variables -+will not be removed. This option is intended to support existing code -+which relies on a particular ordering. For new code, it is better to -+use attributes. -+ -+Enabled at level @option{-O0}. When disabled explicitly, it also imply -+@option{-fno-section-anchors} that is otherwise enabled at @option{-O0} on some -+targets. -+ -+@item -fweb -+@opindex fweb -+Constructs webs as commonly used for register allocation purposes and assign -+each web individual pseudo register. This allows the register allocation pass -+to operate on pseudos directly, but also strengthens several other optimization -+passes, such as CSE, loop optimizer and trivial dead code remover. It can, -+however, make debugging impossible, since variables will no longer stay in a -+``home register''. -+ -+Enabled by default with @option{-funroll-loops}. -+ -+@item -fwhole-program -+@opindex fwhole-program -+Assume that the current compilation unit represents whole program being -+compiled. All public functions and variables with the exception of @code{main} -+and those merged by attribute @code{externally_visible} become static functions -+and in a affect gets more aggressively optimized by interprocedural optimizers. -+While this option is equivalent to proper use of @code{static} keyword for -+programs consisting of single file, in combination with option -+@option{--combine} this flag can be used to compile most of smaller scale C -+programs since the functions and variables become local for the whole combined -+compilation unit, not for the single source file itself. -+ -+This option is not supported for Fortran programs. -+ -+@item -fcprop-registers -+@opindex fcprop-registers -+After register allocation and post-register allocation instruction splitting, -+we perform a copy-propagation pass to try to reduce scheduling dependencies -+and occasionally eliminate the copy. -+ -+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}. -+ -+@item -fprofile-correction -+@opindex fprofile-correction -+Profiles collected using an instrumented binary for multi-threaded programs may -+be inconsistent due to missed counter updates. When this option is specified, -+GCC will use heuristics to correct or smooth out such inconsistencies. By -+default, GCC will emit an error message when an inconsistent profile is detected. -+ -+@item -fprofile-dir=@var{path} -+@opindex fprofile-dir -+ -+Set the directory to search the profile data files in to @var{path}. -+This option affects only the profile data generated by -+@option{-fprofile-generate}, @option{-ftest-coverage}, @option{-fprofile-arcs} -+and used by @option{-fprofile-use} and @option{-fbranch-probabilities} -+and its related options. -+By default, GCC will use the current directory as @var{path} -+thus the profile data file will appear in the same directory as the object file. -+ -+@item -fprofile-generate -+@itemx -fprofile-generate=@var{path} -+@opindex fprofile-generate -+ -+Enable options usually used for instrumenting application to produce -+profile useful for later recompilation with profile feedback based -+optimization. You must use @option{-fprofile-generate} both when -+compiling and when linking your program. -+ -+The following options are enabled: @code{-fprofile-arcs}, @code{-fprofile-values}, @code{-fvpt}. -+ -+If @var{path} is specified, GCC will look at the @var{path} to find -+the profile feedback data files. See @option{-fprofile-dir}. -+ -+@item -fprofile-use -+@itemx -fprofile-use=@var{path} -+@opindex fprofile-use -+Enable profile feedback directed optimizations, and optimizations -+generally profitable only with profile feedback available. -+ -+The following options are enabled: @code{-fbranch-probabilities}, @code{-fvpt}, -+@code{-funroll-loops}, @code{-fpeel-loops}, @code{-ftracer} -+ -+By default, GCC emits an error message if the feedback profiles do not -+match the source code. This error can be turned into a warning by using -+@option{-Wcoverage-mismatch}. Note this may result in poorly optimized -+code. -+ -+If @var{path} is specified, GCC will look at the @var{path} to find -+the profile feedback data files. See @option{-fprofile-dir}. -+@end table -+ -+The following options control compiler behavior regarding floating -+point arithmetic. These options trade off between speed and -+correctness. All must be specifically enabled. -+ -+@table @gcctabopt -+@item -ffloat-store -+@opindex ffloat-store -+Do not store floating point variables in registers, and inhibit other -+options that might change whether a floating point value is taken from a -+register or memory. -+ -+@cindex floating point precision -+This option prevents undesirable excess precision on machines such as -+the 68000 where the floating registers (of the 68881) keep more -+precision than a @code{double} is supposed to have. Similarly for the -+x86 architecture. For most programs, the excess precision does only -+good, but a few programs rely on the precise definition of IEEE floating -+point. Use @option{-ffloat-store} for such programs, after modifying -+them to store all pertinent intermediate computations into variables. -+ -+@item -ffast-math -+@opindex ffast-math -+Sets @option{-fno-math-errno}, @option{-funsafe-math-optimizations}, -+@option{-ffinite-math-only}, @option{-fno-rounding-math}, -+@option{-fno-signaling-nans} and @option{-fcx-limited-range}. -+ -+This option causes the preprocessor macro @code{__FAST_MATH__} to be defined. -+ -+This option is not turned on by any @option{-O} option since -+it can result in incorrect output for programs which depend on -+an exact implementation of IEEE or ISO rules/specifications for -+math functions. It may, however, yield faster code for programs -+that do not require the guarantees of these specifications. -+ -+@item -fno-math-errno -+@opindex fno-math-errno -+Do not set ERRNO after calling math functions that are executed -+with a single instruction, e.g., sqrt. A program that relies on -+IEEE exceptions for math error handling may want to use this flag -+for speed while maintaining IEEE arithmetic compatibility. -+ -+This option is not turned on by any @option{-O} option since -+it can result in incorrect output for programs which depend on -+an exact implementation of IEEE or ISO rules/specifications for -+math functions. It may, however, yield faster code for programs -+that do not require the guarantees of these specifications. -+ -+The default is @option{-fmath-errno}. -+ -+On Darwin systems, the math library never sets @code{errno}. There is -+therefore no reason for the compiler to consider the possibility that -+it might, and @option{-fno-math-errno} is the default. -+ -+@item -funsafe-math-optimizations -+@opindex funsafe-math-optimizations -+ -+Allow optimizations for floating-point arithmetic that (a) assume -+that arguments and results are valid and (b) may violate IEEE or -+ANSI standards. When used at link-time, it may include libraries -+or startup files that change the default FPU control word or other -+similar optimizations. -+ -+This option is not turned on by any @option{-O} option since -+it can result in incorrect output for programs which depend on -+an exact implementation of IEEE or ISO rules/specifications for -+math functions. It may, however, yield faster code for programs -+that do not require the guarantees of these specifications. -+Enables @option{-fno-signed-zeros}, @option{-fno-trapping-math}, -+@option{-fassociative-math} and @option{-freciprocal-math}. -+ -+The default is @option{-fno-unsafe-math-optimizations}. -+ -+@item -fassociative-math -+@opindex fassociative-math -+ -+Allow re-association of operands in series of floating-point operations. -+This violates the ISO C and C++ language standard by possibly changing -+computation result. NOTE: re-ordering may change the sign of zero as -+well as ignore NaNs and inhibit or create underflow or overflow (and -+thus cannot be used on a code which relies on rounding behavior like -+@code{(x + 2**52) - 2**52)}. May also reorder floating-point comparisons -+and thus may not be used when ordered comparisons are required. -+This option requires that both @option{-fno-signed-zeros} and -+@option{-fno-trapping-math} be in effect. Moreover, it doesn't make -+much sense with @option{-frounding-math}. -+ -+The default is @option{-fno-associative-math}. -+ -+@item -freciprocal-math -+@opindex freciprocal-math -+ -+Allow the reciprocal of a value to be used instead of dividing by -+the value if this enables optimizations. For example @code{x / y} -+can be replaced with @code{x * (1/y)} which is useful if @code{(1/y)} -+is subject to common subexpression elimination. Note that this loses -+precision and increases the number of flops operating on the value. -+ -+The default is @option{-fno-reciprocal-math}. -+ -+@item -ffinite-math-only -+@opindex ffinite-math-only -+Allow optimizations for floating-point arithmetic that assume -+that arguments and results are not NaNs or +-Infs. -+ -+This option is not turned on by any @option{-O} option since -+it can result in incorrect output for programs which depend on -+an exact implementation of IEEE or ISO rules/specifications for -+math functions. It may, however, yield faster code for programs -+that do not require the guarantees of these specifications. -+ -+The default is @option{-fno-finite-math-only}. -+ -+@item -fno-signed-zeros -+@opindex fno-signed-zeros -+Allow optimizations for floating point arithmetic that ignore the -+signedness of zero. IEEE arithmetic specifies the behavior of -+distinct +0.0 and @minus{}0.0 values, which then prohibits simplification -+of expressions such as x+0.0 or 0.0*x (even with @option{-ffinite-math-only}). -+This option implies that the sign of a zero result isn't significant. -+ -+The default is @option{-fsigned-zeros}. -+ -+@item -fno-trapping-math -+@opindex fno-trapping-math -+Compile code assuming that floating-point operations cannot generate -+user-visible traps. These traps include division by zero, overflow, -+underflow, inexact result and invalid operation. This option requires -+that @option{-fno-signaling-nans} be in effect. Setting this option may -+allow faster code if one relies on ``non-stop'' IEEE arithmetic, for example. -+ -+This option should never be turned on by any @option{-O} option since -+it can result in incorrect output for programs which depend on -+an exact implementation of IEEE or ISO rules/specifications for -+math functions. -+ -+The default is @option{-ftrapping-math}. -+ -+@item -frounding-math -+@opindex frounding-math -+Disable transformations and optimizations that assume default floating -+point rounding behavior. This is round-to-zero for all floating point -+to integer conversions, and round-to-nearest for all other arithmetic -+truncations. This option should be specified for programs that change -+the FP rounding mode dynamically, or that may be executed with a -+non-default rounding mode. This option disables constant folding of -+floating point expressions at compile-time (which may be affected by -+rounding mode) and arithmetic transformations that are unsafe in the -+presence of sign-dependent rounding modes. -+ -+The default is @option{-fno-rounding-math}. -+ -+This option is experimental and does not currently guarantee to -+disable all GCC optimizations that are affected by rounding mode. -+Future versions of GCC may provide finer control of this setting -+using C99's @code{FENV_ACCESS} pragma. This command line option -+will be used to specify the default state for @code{FENV_ACCESS}. -+ -+@item -frtl-abstract-sequences -+@opindex frtl-abstract-sequences -+It is a size optimization method. This option is to find identical -+sequences of code, which can be turned into pseudo-procedures and -+then replace all occurrences with calls to the newly created -+subroutine. It is kind of an opposite of @option{-finline-functions}. -+This optimization runs at RTL level. -+ -+@item -fsignaling-nans -+@opindex fsignaling-nans -+Compile code assuming that IEEE signaling NaNs may generate user-visible -+traps during floating-point operations. Setting this option disables -+optimizations that may change the number of exceptions visible with -+signaling NaNs. This option implies @option{-ftrapping-math}. -+ -+This option causes the preprocessor macro @code{__SUPPORT_SNAN__} to -+be defined. -+ -+The default is @option{-fno-signaling-nans}. -+ -+This option is experimental and does not currently guarantee to -+disable all GCC optimizations that affect signaling NaN behavior. -+ -+@item -fsingle-precision-constant -+@opindex fsingle-precision-constant -+Treat floating point constant as single precision constant instead of -+implicitly converting it to double precision constant. -+ -+@item -fcx-limited-range -+@opindex fcx-limited-range -+When enabled, this option states that a range reduction step is not -+needed when performing complex division. Also, there is no checking -+whether the result of a complex multiplication or division is @code{NaN -++ I*NaN}, with an attempt to rescue the situation in that case. The -+default is @option{-fno-cx-limited-range}, but is enabled by -+@option{-ffast-math}. -+ -+This option controls the default setting of the ISO C99 -+@code{CX_LIMITED_RANGE} pragma. Nevertheless, the option applies to -+all languages. -+ -+@item -fcx-fortran-rules -+@opindex fcx-fortran-rules -+Complex multiplication and division follow Fortran rules. Range -+reduction is done as part of complex division, but there is no checking -+whether the result of a complex multiplication or division is @code{NaN -++ I*NaN}, with an attempt to rescue the situation in that case. -+ -+The default is @option{-fno-cx-fortran-rules}. -+ -+@end table -+ -+The following options control optimizations that may improve -+performance, but are not enabled by any @option{-O} options. This -+section includes experimental options that may produce broken code. -+ -+@table @gcctabopt -+@item -fbranch-probabilities -+@opindex fbranch-probabilities -+After running a program compiled with @option{-fprofile-arcs} -+(@pxref{Debugging Options,, Options for Debugging Your Program or -+@command{gcc}}), you can compile it a second time using -+@option{-fbranch-probabilities}, to improve optimizations based on -+the number of times each branch was taken. When the program -+compiled with @option{-fprofile-arcs} exits it saves arc execution -+counts to a file called @file{@var{sourcename}.gcda} for each source -+file. The information in this data file is very dependent on the -+structure of the generated code, so you must use the same source code -+and the same optimization options for both compilations. -+ -+With @option{-fbranch-probabilities}, GCC puts a -+@samp{REG_BR_PROB} note on each @samp{JUMP_INSN} and @samp{CALL_INSN}. -+These can be used to improve optimization. Currently, they are only -+used in one place: in @file{reorg.c}, instead of guessing which path a -+branch is mostly to take, the @samp{REG_BR_PROB} values are used to -+exactly determine which path is taken more often. -+ -+@item -fprofile-values -+@opindex fprofile-values -+If combined with @option{-fprofile-arcs}, it adds code so that some -+data about values of expressions in the program is gathered. -+ -+With @option{-fbranch-probabilities}, it reads back the data gathered -+from profiling values of expressions and adds @samp{REG_VALUE_PROFILE} -+notes to instructions for their later usage in optimizations. -+ -+Enabled with @option{-fprofile-generate} and @option{-fprofile-use}. -+ -+@item -fvpt -+@opindex fvpt -+If combined with @option{-fprofile-arcs}, it instructs the compiler to add -+a code to gather information about values of expressions. -+ -+With @option{-fbranch-probabilities}, it reads back the data gathered -+and actually performs the optimizations based on them. -+Currently the optimizations include specialization of division operation -+using the knowledge about the value of the denominator. -+ -+@item -frename-registers -+@opindex frename-registers -+Attempt to avoid false dependencies in scheduled code by making use -+of registers left over after register allocation. This optimization -+will most benefit processors with lots of registers. Depending on the -+debug information format adopted by the target, however, it can -+make debugging impossible, since variables will no longer stay in -+a ``home register''. -+ -+Enabled by default with @option{-funroll-loops}. -+ -+@item -ftracer -+@opindex ftracer -+Perform tail duplication to enlarge superblock size. This transformation -+simplifies the control flow of the function allowing other optimizations to do -+better job. -+ -+Enabled with @option{-fprofile-use}. -+ -+@item -funroll-loops -+@opindex funroll-loops -+Unroll loops whose number of iterations can be determined at compile time or -+upon entry to the loop. @option{-funroll-loops} implies -+@option{-frerun-cse-after-loop}, @option{-fweb} and @option{-frename-registers}. -+It also turns on complete loop peeling (i.e.@: complete removal of loops with -+small constant number of iterations). This option makes code larger, and may -+or may not make it run faster. -+ -+Enabled with @option{-fprofile-use}. -+ -+@item -funroll-all-loops -+@opindex funroll-all-loops -+Unroll all loops, even if their number of iterations is uncertain when -+the loop is entered. This usually makes programs run more slowly. -+@option{-funroll-all-loops} implies the same options as -+@option{-funroll-loops}. -+ -+@item -fpeel-loops -+@opindex fpeel-loops -+Peels the loops for that there is enough information that they do not -+roll much (from profile feedback). It also turns on complete loop peeling -+(i.e.@: complete removal of loops with small constant number of iterations). -+ -+Enabled with @option{-fprofile-use}. -+ -+@item -fmove-loop-invariants -+@opindex fmove-loop-invariants -+Enables the loop invariant motion pass in the RTL loop optimizer. Enabled -+at level @option{-O1} -+ -+@item -funswitch-loops -+@opindex funswitch-loops -+Move branches with loop invariant conditions out of the loop, with duplicates -+of the loop on both branches (modified according to result of the condition). -+ -+@item -ffunction-sections -+@itemx -fdata-sections -+@opindex ffunction-sections -+@opindex fdata-sections -+Place each function or data item into its own section in the output -+file if the target supports arbitrary sections. The name of the -+function or the name of the data item determines the section's name -+in the output file. -+ -+Use these options on systems where the linker can perform optimizations -+to improve locality of reference in the instruction space. Most systems -+using the ELF object format and SPARC processors running Solaris 2 have -+linkers with such optimizations. AIX may have these optimizations in -+the future. -+ -+Only use these options when there are significant benefits from doing -+so. When you specify these options, the assembler and linker will -+create larger object and executable files and will also be slower. -+You will not be able to use @code{gprof} on all systems if you -+specify this option and you may have problems with debugging if -+you specify both this option and @option{-g}. -+ -+@item -fbranch-target-load-optimize -+@opindex fbranch-target-load-optimize -+Perform branch target register load optimization before prologue / epilogue -+threading. -+The use of target registers can typically be exposed only during reload, -+thus hoisting loads out of loops and doing inter-block scheduling needs -+a separate optimization pass. -+ -+@item -fbranch-target-load-optimize2 -+@opindex fbranch-target-load-optimize2 -+Perform branch target register load optimization after prologue / epilogue -+threading. -+ -+@item -fbtr-bb-exclusive -+@opindex fbtr-bb-exclusive -+When performing branch target register load optimization, don't reuse -+branch target registers in within any basic block. -+ -+@item -fstack-protector -+@opindex fstack-protector -+Emit extra code to check for buffer overflows, such as stack smashing -+attacks. This is done by adding a guard variable to functions with -+vulnerable objects. This includes functions that call alloca, and -+functions with buffers larger than 8 bytes. The guards are initialized -+when a function is entered and then checked when the function exits. -+If a guard check fails, an error message is printed and the program exits. -+ -+@item -fstack-protector-all -+@opindex fstack-protector-all -+Like @option{-fstack-protector} except that all functions are protected. -+ -+@item -fsection-anchors -+@opindex fsection-anchors -+Try to reduce the number of symbolic address calculations by using -+shared ``anchor'' symbols to address nearby objects. This transformation -+can help to reduce the number of GOT entries and GOT accesses on some -+targets. -+ -+For example, the implementation of the following function @code{foo}: -+ -+@smallexample -+static int a, b, c; -+int foo (void) @{ return a + b + c; @} -+@end smallexample -+ -+would usually calculate the addresses of all three variables, but if you -+compile it with @option{-fsection-anchors}, it will access the variables -+from a common anchor point instead. The effect is similar to the -+following pseudocode (which isn't valid C): -+ -+@smallexample -+int foo (void) -+@{ -+ register int *xr = &x; -+ return xr[&a - &x] + xr[&b - &x] + xr[&c - &x]; -+@} -+@end smallexample -+ -+Not all targets support this option. -+ -+@item --param @var{name}=@var{value} -+@opindex param -+In some places, GCC uses various constants to control the amount of -+optimization that is done. For example, GCC will not inline functions -+that contain more that a certain number of instructions. You can -+control some of these constants on the command-line using the -+@option{--param} option. -+ -+The names of specific parameters, and the meaning of the values, are -+tied to the internals of the compiler, and are subject to change -+without notice in future releases. -+ -+In each case, the @var{value} is an integer. The allowable choices for -+@var{name} are given in the following table: -+ -+@table @gcctabopt -+@item sra-max-structure-size -+The maximum structure size, in bytes, at which the scalar replacement -+of aggregates (SRA) optimization will perform block copies. The -+default value, 0, implies that GCC will select the most appropriate -+size itself. -+ -+@item sra-field-structure-ratio -+The threshold ratio (as a percentage) between instantiated fields and -+the complete structure size. We say that if the ratio of the number -+of bytes in instantiated fields to the number of bytes in the complete -+structure exceeds this parameter, then block copies are not used. The -+default is 75. -+ -+@item struct-reorg-cold-struct-ratio -+The threshold ratio (as a percentage) between a structure frequency -+and the frequency of the hottest structure in the program. This parameter -+is used by struct-reorg optimization enabled by @option{-fipa-struct-reorg}. -+We say that if the ratio of a structure frequency, calculated by profiling, -+to the hottest structure frequency in the program is less than this -+parameter, then structure reorganization is not applied to this structure. -+The default is 10. -+ -+@item predictable-branch-cost-outcome -+When branch is predicted to be taken with probability lower than this threshold -+(in percent), then it is considered well predictable. The default is 10. -+ -+@item max-crossjump-edges -+The maximum number of incoming edges to consider for crossjumping. -+The algorithm used by @option{-fcrossjumping} is @math{O(N^2)} in -+the number of edges incoming to each block. Increasing values mean -+more aggressive optimization, making the compile time increase with -+probably small improvement in executable size. -+ -+@item min-crossjump-insns -+The minimum number of instructions which must be matched at the end -+of two blocks before crossjumping will be performed on them. This -+value is ignored in the case where all instructions in the block being -+crossjumped from are matched. The default value is 5. -+ -+@item max-grow-copy-bb-insns -+The maximum code size expansion factor when copying basic blocks -+instead of jumping. The expansion is relative to a jump instruction. -+The default value is 8. -+ -+@item max-goto-duplication-insns -+The maximum number of instructions to duplicate to a block that jumps -+to a computed goto. To avoid @math{O(N^2)} behavior in a number of -+passes, GCC factors computed gotos early in the compilation process, -+and unfactors them as late as possible. Only computed jumps at the -+end of a basic blocks with no more than max-goto-duplication-insns are -+unfactored. The default value is 8. -+ -+@item max-delay-slot-insn-search -+The maximum number of instructions to consider when looking for an -+instruction to fill a delay slot. If more than this arbitrary number of -+instructions is searched, the time savings from filling the delay slot -+will be minimal so stop searching. Increasing values mean more -+aggressive optimization, making the compile time increase with probably -+small improvement in executable run time. -+ -+@item max-delay-slot-live-search -+When trying to fill delay slots, the maximum number of instructions to -+consider when searching for a block with valid live register -+information. Increasing this arbitrarily chosen value means more -+aggressive optimization, increasing the compile time. This parameter -+should be removed when the delay slot code is rewritten to maintain the -+control-flow graph. -+ -+@item max-gcse-memory -+The approximate maximum amount of memory that will be allocated in -+order to perform the global common subexpression elimination -+optimization. If more memory than specified is required, the -+optimization will not be done. -+ -+@item max-gcse-passes -+The maximum number of passes of GCSE to run. The default is 1. -+ -+@item max-pending-list-length -+The maximum number of pending dependencies scheduling will allow -+before flushing the current state and starting over. Large functions -+with few branches or calls can create excessively large lists which -+needlessly consume memory and resources. -+ -+@item max-inline-insns-single -+Several parameters control the tree inliner used in gcc. -+This number sets the maximum number of instructions (counted in GCC's -+internal representation) in a single function that the tree inliner -+will consider for inlining. This only affects functions declared -+inline and methods implemented in a class declaration (C++). -+The default value is 450. -+ -+@item max-inline-insns-auto -+When you use @option{-finline-functions} (included in @option{-O3}), -+a lot of functions that would otherwise not be considered for inlining -+by the compiler will be investigated. To those functions, a different -+(more restrictive) limit compared to functions declared inline can -+be applied. -+The default value is 90. -+ -+@item large-function-insns -+The limit specifying really large functions. For functions larger than this -+limit after inlining, inlining is constrained by -+@option{--param large-function-growth}. This parameter is useful primarily -+to avoid extreme compilation time caused by non-linear algorithms used by the -+backend. -+The default value is 2700. -+ -+@item large-function-growth -+Specifies maximal growth of large function caused by inlining in percents. -+The default value is 100 which limits large function growth to 2.0 times -+the original size. -+ -+@item large-unit-insns -+The limit specifying large translation unit. Growth caused by inlining of -+units larger than this limit is limited by @option{--param inline-unit-growth}. -+For small units this might be too tight (consider unit consisting of function A -+that is inline and B that just calls A three time. If B is small relative to -+A, the growth of unit is 300\% and yet such inlining is very sane. For very -+large units consisting of small inlineable functions however the overall unit -+growth limit is needed to avoid exponential explosion of code size. Thus for -+smaller units, the size is increased to @option{--param large-unit-insns} -+before applying @option{--param inline-unit-growth}. The default is 10000 -+ -+@item inline-unit-growth -+Specifies maximal overall growth of the compilation unit caused by inlining. -+The default value is 30 which limits unit growth to 1.3 times the original -+size. -+ -+@item ipcp-unit-growth -+Specifies maximal overall growth of the compilation unit caused by -+interprocedural constant propagation. The default value is 10 which limits -+unit growth to 1.1 times the original size. -+ -+@item large-stack-frame -+The limit specifying large stack frames. While inlining the algorithm is trying -+to not grow past this limit too much. Default value is 256 bytes. -+ -+@item large-stack-frame-growth -+Specifies maximal growth of large stack frames caused by inlining in percents. -+The default value is 1000 which limits large stack frame growth to 11 times -+the original size. -+ -+@item max-inline-insns-recursive -+@itemx max-inline-insns-recursive-auto -+Specifies maximum number of instructions out-of-line copy of self recursive inline -+function can grow into by performing recursive inlining. -+ -+For functions declared inline @option{--param max-inline-insns-recursive} is -+taken into account. For function not declared inline, recursive inlining -+happens only when @option{-finline-functions} (included in @option{-O3}) is -+enabled and @option{--param max-inline-insns-recursive-auto} is used. The -+default value is 450. -+ -+@item max-inline-recursive-depth -+@itemx max-inline-recursive-depth-auto -+Specifies maximum recursion depth used by the recursive inlining. -+ -+For functions declared inline @option{--param max-inline-recursive-depth} is -+taken into account. For function not declared inline, recursive inlining -+happens only when @option{-finline-functions} (included in @option{-O3}) is -+enabled and @option{--param max-inline-recursive-depth-auto} is used. The -+default value is 8. -+ -+@item min-inline-recursive-probability -+Recursive inlining is profitable only for function having deep recursion -+in average and can hurt for function having little recursion depth by -+increasing the prologue size or complexity of function body to other -+optimizers. -+ -+When profile feedback is available (see @option{-fprofile-generate}) the actual -+recursion depth can be guessed from probability that function will recurse via -+given call expression. This parameter limits inlining only to call expression -+whose probability exceeds given threshold (in percents). The default value is -+10. -+ -+@item inline-call-cost -+Specify cost of call instruction relative to simple arithmetics operations -+(having cost of 1). Increasing this cost disqualifies inlining of non-leaf -+functions and at the same time increases size of leaf function that is believed to -+reduce function size by being inlined. In effect it increases amount of -+inlining for code having large abstraction penalty (many functions that just -+pass the arguments to other functions) and decrease inlining for code with low -+abstraction penalty. The default value is 12. -+ -+@item min-vect-loop-bound -+The minimum number of iterations under which a loop will not get vectorized -+when @option{-ftree-vectorize} is used. The number of iterations after -+vectorization needs to be greater than the value specified by this option -+to allow vectorization. The default value is 0. -+ -+@item max-unrolled-insns -+The maximum number of instructions that a loop should have if that loop -+is unrolled, and if the loop is unrolled, it determines how many times -+the loop code is unrolled. -+ -+@item max-average-unrolled-insns -+The maximum number of instructions biased by probabilities of their execution -+that a loop should have if that loop is unrolled, and if the loop is unrolled, -+it determines how many times the loop code is unrolled. -+ -+@item max-unroll-times -+The maximum number of unrollings of a single loop. -+ -+@item max-peeled-insns -+The maximum number of instructions that a loop should have if that loop -+is peeled, and if the loop is peeled, it determines how many times -+the loop code is peeled. -+ -+@item max-peel-times -+The maximum number of peelings of a single loop. -+ -+@item max-completely-peeled-insns -+The maximum number of insns of a completely peeled loop. -+ -+@item max-completely-peel-times -+The maximum number of iterations of a loop to be suitable for complete peeling. -+ -+@item max-unswitch-insns -+The maximum number of insns of an unswitched loop. -+ -+@item max-unswitch-level -+The maximum number of branches unswitched in a single loop. -+ -+@item lim-expensive -+The minimum cost of an expensive expression in the loop invariant motion. -+ -+@item iv-consider-all-candidates-bound -+Bound on number of candidates for induction variables below that -+all candidates are considered for each use in induction variable -+optimizations. Only the most relevant candidates are considered -+if there are more candidates, to avoid quadratic time complexity. -+ -+@item iv-max-considered-uses -+The induction variable optimizations give up on loops that contain more -+induction variable uses. -+ -+@item iv-always-prune-cand-set-bound -+If number of candidates in the set is smaller than this value, -+we always try to remove unnecessary ivs from the set during its -+optimization when a new iv is added to the set. -+ -+@item scev-max-expr-size -+Bound on size of expressions used in the scalar evolutions analyzer. -+Large expressions slow the analyzer. -+ -+@item omega-max-vars -+The maximum number of variables in an Omega constraint system. -+The default value is 128. -+ -+@item omega-max-geqs -+The maximum number of inequalities in an Omega constraint system. -+The default value is 256. -+ -+@item omega-max-eqs -+The maximum number of equalities in an Omega constraint system. -+The default value is 128. -+ -+@item omega-max-wild-cards -+The maximum number of wildcard variables that the Omega solver will -+be able to insert. The default value is 18. -+ -+@item omega-hash-table-size -+The size of the hash table in the Omega solver. The default value is -+550. -+ -+@item omega-max-keys -+The maximal number of keys used by the Omega solver. The default -+value is 500. -+ -+@item omega-eliminate-redundant-constraints -+When set to 1, use expensive methods to eliminate all redundant -+constraints. The default value is 0. -+ -+@item vect-max-version-for-alignment-checks -+The maximum number of runtime checks that can be performed when -+doing loop versioning for alignment in the vectorizer. See option -+ftree-vect-loop-version for more information. -+ -+@item vect-max-version-for-alias-checks -+The maximum number of runtime checks that can be performed when -+doing loop versioning for alias in the vectorizer. See option -+ftree-vect-loop-version for more information. -+ -+@item max-iterations-to-track -+ -+The maximum number of iterations of a loop the brute force algorithm -+for analysis of # of iterations of the loop tries to evaluate. -+ -+@item hot-bb-count-fraction -+Select fraction of the maximal count of repetitions of basic block in program -+given basic block needs to have to be considered hot. -+ -+@item hot-bb-frequency-fraction -+Select fraction of the maximal frequency of executions of basic block in -+function given basic block needs to have to be considered hot -+ -+@item max-predicted-iterations -+The maximum number of loop iterations we predict statically. This is useful -+in cases where function contain single loop with known bound and other loop -+with unknown. We predict the known number of iterations correctly, while -+the unknown number of iterations average to roughly 10. This means that the -+loop without bounds would appear artificially cold relative to the other one. -+ -+@item align-threshold -+ -+Select fraction of the maximal frequency of executions of basic block in -+function given basic block will get aligned. -+ -+@item align-loop-iterations -+ -+A loop expected to iterate at lest the selected number of iterations will get -+aligned. -+ -+@item tracer-dynamic-coverage -+@itemx tracer-dynamic-coverage-feedback -+ -+This value is used to limit superblock formation once the given percentage of -+executed instructions is covered. This limits unnecessary code size -+expansion. -+ -+The @option{tracer-dynamic-coverage-feedback} is used only when profile -+feedback is available. The real profiles (as opposed to statically estimated -+ones) are much less balanced allowing the threshold to be larger value. -+ -+@item tracer-max-code-growth -+Stop tail duplication once code growth has reached given percentage. This is -+rather hokey argument, as most of the duplicates will be eliminated later in -+cross jumping, so it may be set to much higher values than is the desired code -+growth. -+ -+@item tracer-min-branch-ratio -+ -+Stop reverse growth when the reverse probability of best edge is less than this -+threshold (in percent). -+ -+@item tracer-min-branch-ratio -+@itemx tracer-min-branch-ratio-feedback -+ -+Stop forward growth if the best edge do have probability lower than this -+threshold. -+ -+Similarly to @option{tracer-dynamic-coverage} two values are present, one for -+compilation for profile feedback and one for compilation without. The value -+for compilation with profile feedback needs to be more conservative (higher) in -+order to make tracer effective. -+ -+@item max-cse-path-length -+ -+Maximum number of basic blocks on path that cse considers. The default is 10. -+ -+@item max-cse-insns -+The maximum instructions CSE process before flushing. The default is 1000. -+ -+@item max-aliased-vops -+ -+Maximum number of virtual operands per function allowed to represent -+aliases before triggering the alias partitioning heuristic. Alias -+partitioning reduces compile times and memory consumption needed for -+aliasing at the expense of precision loss in alias information. The -+default value for this parameter is 100 for -O1, 500 for -O2 and 1000 -+for -O3. -+ -+Notice that if a function contains more memory statements than the -+value of this parameter, it is not really possible to achieve this -+reduction. In this case, the compiler will use the number of memory -+statements as the value for @option{max-aliased-vops}. -+ -+@item avg-aliased-vops -+ -+Average number of virtual operands per statement allowed to represent -+aliases before triggering the alias partitioning heuristic. This -+works in conjunction with @option{max-aliased-vops}. If a function -+contains more than @option{max-aliased-vops} virtual operators, then -+memory symbols will be grouped into memory partitions until either the -+total number of virtual operators is below @option{max-aliased-vops} -+or the average number of virtual operators per memory statement is -+below @option{avg-aliased-vops}. The default value for this parameter -+is 1 for -O1 and -O2, and 3 for -O3. -+ -+@item ggc-min-expand -+ -+GCC uses a garbage collector to manage its own memory allocation. This -+parameter specifies the minimum percentage by which the garbage -+collector's heap should be allowed to expand between collections. -+Tuning this may improve compilation speed; it has no effect on code -+generation. -+ -+The default is 30% + 70% * (RAM/1GB) with an upper bound of 100% when -+RAM >= 1GB@. If @code{getrlimit} is available, the notion of "RAM" is -+the smallest of actual RAM and @code{RLIMIT_DATA} or @code{RLIMIT_AS}. If -+GCC is not able to calculate RAM on a particular platform, the lower -+bound of 30% is used. Setting this parameter and -+@option{ggc-min-heapsize} to zero causes a full collection to occur at -+every opportunity. This is extremely slow, but can be useful for -+debugging. -+ -+@item ggc-min-heapsize -+ -+Minimum size of the garbage collector's heap before it begins bothering -+to collect garbage. The first collection occurs after the heap expands -+by @option{ggc-min-expand}% beyond @option{ggc-min-heapsize}. Again, -+tuning this may improve compilation speed, and has no effect on code -+generation. -+ -+The default is the smaller of RAM/8, RLIMIT_RSS, or a limit which -+tries to ensure that RLIMIT_DATA or RLIMIT_AS are not exceeded, but -+with a lower bound of 4096 (four megabytes) and an upper bound of -+131072 (128 megabytes). If GCC is not able to calculate RAM on a -+particular platform, the lower bound is used. Setting this parameter -+very large effectively disables garbage collection. Setting this -+parameter and @option{ggc-min-expand} to zero causes a full collection -+to occur at every opportunity. -+ -+@item max-reload-search-insns -+The maximum number of instruction reload should look backward for equivalent -+register. Increasing values mean more aggressive optimization, making the -+compile time increase with probably slightly better performance. The default -+value is 100. -+ -+@item max-cselib-memory-locations -+The maximum number of memory locations cselib should take into account. -+Increasing values mean more aggressive optimization, making the compile time -+increase with probably slightly better performance. The default value is 500. -+ -+@item reorder-blocks-duplicate -+@itemx reorder-blocks-duplicate-feedback -+ -+Used by basic block reordering pass to decide whether to use unconditional -+branch or duplicate the code on its destination. Code is duplicated when its -+estimated size is smaller than this value multiplied by the estimated size of -+unconditional jump in the hot spots of the program. -+ -+The @option{reorder-block-duplicate-feedback} is used only when profile -+feedback is available and may be set to higher values than -+@option{reorder-block-duplicate} since information about the hot spots is more -+accurate. -+ -+@item max-sched-ready-insns -+The maximum number of instructions ready to be issued the scheduler should -+consider at any given time during the first scheduling pass. Increasing -+values mean more thorough searches, making the compilation time increase -+with probably little benefit. The default value is 100. -+ -+@item max-sched-region-blocks -+The maximum number of blocks in a region to be considered for -+interblock scheduling. The default value is 10. -+ -+@item max-pipeline-region-blocks -+The maximum number of blocks in a region to be considered for -+pipelining in the selective scheduler. The default value is 15. -+ -+@item max-sched-region-insns -+The maximum number of insns in a region to be considered for -+interblock scheduling. The default value is 100. -+ -+@item max-pipeline-region-insns -+The maximum number of insns in a region to be considered for -+pipelining in the selective scheduler. The default value is 200. -+ -+@item min-spec-prob -+The minimum probability (in percents) of reaching a source block -+for interblock speculative scheduling. The default value is 40. -+ -+@item max-sched-extend-regions-iters -+The maximum number of iterations through CFG to extend regions. -+0 - disable region extension, -+N - do at most N iterations. -+The default value is 0. -+ -+@item max-sched-insn-conflict-delay -+The maximum conflict delay for an insn to be considered for speculative motion. -+The default value is 3. -+ -+@item sched-spec-prob-cutoff -+The minimal probability of speculation success (in percents), so that -+speculative insn will be scheduled. -+The default value is 40. -+ -+@item sched-mem-true-dep-cost -+Minimal distance (in CPU cycles) between store and load targeting same -+memory locations. The default value is 1. -+ -+@item selsched-max-lookahead -+The maximum size of the lookahead window of selective scheduling. It is a -+depth of search for available instructions. -+The default value is 50. -+ -+@item selsched-max-sched-times -+The maximum number of times that an instruction will be scheduled during -+selective scheduling. This is the limit on the number of iterations -+through which the instruction may be pipelined. The default value is 2. -+ -+@item selsched-max-insns-to-rename -+The maximum number of best instructions in the ready list that are considered -+for renaming in the selective scheduler. The default value is 2. -+ -+@item max-last-value-rtl -+The maximum size measured as number of RTLs that can be recorded in an expression -+in combiner for a pseudo register as last known value of that register. The default -+is 10000. -+ -+@item integer-share-limit -+Small integer constants can use a shared data structure, reducing the -+compiler's memory usage and increasing its speed. This sets the maximum -+value of a shared integer constant. The default value is 256. -+ -+@item min-virtual-mappings -+Specifies the minimum number of virtual mappings in the incremental -+SSA updater that should be registered to trigger the virtual mappings -+heuristic defined by virtual-mappings-ratio. The default value is -+100. -+ -+@item virtual-mappings-ratio -+If the number of virtual mappings is virtual-mappings-ratio bigger -+than the number of virtual symbols to be updated, then the incremental -+SSA updater switches to a full update for those symbols. The default -+ratio is 3. -+ -+@item ssp-buffer-size -+The minimum size of buffers (i.e.@: arrays) that will receive stack smashing -+protection when @option{-fstack-protection} is used. -+ -+@item max-jump-thread-duplication-stmts -+Maximum number of statements allowed in a block that needs to be -+duplicated when threading jumps. -+ -+@item max-fields-for-field-sensitive -+Maximum number of fields in a structure we will treat in -+a field sensitive manner during pointer analysis. The default is zero -+for -O0, and -O1 and 100 for -Os, -O2, and -O3. -+ -+@item prefetch-latency -+Estimate on average number of instructions that are executed before -+prefetch finishes. The distance we prefetch ahead is proportional -+to this constant. Increasing this number may also lead to less -+streams being prefetched (see @option{simultaneous-prefetches}). -+ -+@item simultaneous-prefetches -+Maximum number of prefetches that can run at the same time. -+ -+@item l1-cache-line-size -+The size of cache line in L1 cache, in bytes. -+ -+@item l1-cache-size -+The size of L1 cache, in kilobytes. -+ -+@item l2-cache-size -+The size of L2 cache, in kilobytes. -+ -+@item use-canonical-types -+Whether the compiler should use the ``canonical'' type system. By -+default, this should always be 1, which uses a more efficient internal -+mechanism for comparing types in C++ and Objective-C++. However, if -+bugs in the canonical type system are causing compilation failures, -+set this value to 0 to disable canonical types. -+ -+@item switch-conversion-max-branch-ratio -+Switch initialization conversion will refuse to create arrays that are -+bigger than @option{switch-conversion-max-branch-ratio} times the number of -+branches in the switch. -+ -+@item max-partial-antic-length -+Maximum length of the partial antic set computed during the tree -+partial redundancy elimination optimization (@option{-ftree-pre}) when -+optimizing at @option{-O3} and above. For some sorts of source code -+the enhanced partial redundancy elimination optimization can run away, -+consuming all of the memory available on the host machine. This -+parameter sets a limit on the length of the sets that are computed, -+which prevents the runaway behavior. Setting a value of 0 for -+this parameter will allow an unlimited set length. -+ -+@item sccvn-max-scc-size -+Maximum size of a strongly connected component (SCC) during SCCVN -+processing. If this limit is hit, SCCVN processing for the whole -+function will not be done and optimizations depending on it will -+be disabled. The default maximum SCC size is 10000. -+ -+@item ira-max-loops-num -+IRA uses a regional register allocation by default. If a function -+contains loops more than number given by the parameter, only at most -+given number of the most frequently executed loops will form regions -+for the regional register allocation. The default value of the -+parameter is 100. -+ -+@item ira-max-conflict-table-size -+Although IRA uses a sophisticated algorithm of compression conflict -+table, the table can be still big for huge functions. If the conflict -+table for a function could be more than size in MB given by the -+parameter, the conflict table is not built and faster, simpler, and -+lower quality register allocation algorithm will be used. The -+algorithm do not use pseudo-register conflicts. The default value of -+the parameter is 2000. -+ -+@item loop-invariant-max-bbs-in-loop -+Loop invariant motion can be very expensive, both in compile time and -+in amount of needed compile time memory, with very large loops. Loops -+with more basic blocks than this parameter won't have loop invariant -+motion optimization performed on them. The default value of the -+parameter is 1000 for -O1 and 10000 for -O2 and above. -+ -+@end table -+@end table -+ -+@node Preprocessor Options -+@section Options Controlling the Preprocessor -+@cindex preprocessor options -+@cindex options, preprocessor -+ -+These options control the C preprocessor, which is run on each C source -+file before actual compilation. -+ -+If you use the @option{-E} option, nothing is done except preprocessing. -+Some of these options make sense only together with @option{-E} because -+they cause the preprocessor output to be unsuitable for actual -+compilation. -+ -+@table @gcctabopt -+@opindex Wp -+You can use @option{-Wp,@var{option}} to bypass the compiler driver -+and pass @var{option} directly through to the preprocessor. If -+@var{option} contains commas, it is split into multiple options at the -+commas. However, many options are modified, translated or interpreted -+by the compiler driver before being passed to the preprocessor, and -+@option{-Wp} forcibly bypasses this phase. The preprocessor's direct -+interface is undocumented and subject to change, so whenever possible -+you should avoid using @option{-Wp} and let the driver handle the -+options instead. -+ -+@item -Xpreprocessor @var{option} -+@opindex preprocessor -+Pass @var{option} as an option to the preprocessor. You can use this to -+supply system-specific preprocessor options which GCC does not know how to -+recognize. -+ -+If you want to pass an option that takes an argument, you must use -+@option{-Xpreprocessor} twice, once for the option and once for the argument. -+@end table -+ -+@include cppopts.texi -+ -+@node Assembler Options -+@section Passing Options to the Assembler -+ -+@c prevent bad page break with this line -+You can pass options to the assembler. -+ -+@table @gcctabopt -+@item -Wa,@var{option} -+@opindex Wa -+Pass @var{option} as an option to the assembler. If @var{option} -+contains commas, it is split into multiple options at the commas. -+ -+@item -Xassembler @var{option} -+@opindex Xassembler -+Pass @var{option} as an option to the assembler. You can use this to -+supply system-specific assembler options which GCC does not know how to -+recognize. -+ -+If you want to pass an option that takes an argument, you must use -+@option{-Xassembler} twice, once for the option and once for the argument. -+ -+@end table -+ -+@node Link Options -+@section Options for Linking -+@cindex link options -+@cindex options, linking -+ -+These options come into play when the compiler links object files into -+an executable output file. They are meaningless if the compiler is -+not doing a link step. -+ -+@table @gcctabopt -+@cindex file names -+@item @var{object-file-name} -+A file name that does not end in a special recognized suffix is -+considered to name an object file or library. (Object files are -+distinguished from libraries by the linker according to the file -+contents.) If linking is done, these object files are used as input -+to the linker. -+ -+@item -c -+@itemx -S -+@itemx -E -+@opindex c -+@opindex S -+@opindex E -+If any of these options is used, then the linker is not run, and -+object file names should not be used as arguments. @xref{Overall -+Options}. -+ -+@cindex Libraries -+@item -l@var{library} -+@itemx -l @var{library} -+@opindex l -+Search the library named @var{library} when linking. (The second -+alternative with the library as a separate argument is only for -+POSIX compliance and is not recommended.) -+ -+It makes a difference where in the command you write this option; the -+linker searches and processes libraries and object files in the order they -+are specified. Thus, @samp{foo.o -lz bar.o} searches library @samp{z} -+after file @file{foo.o} but before @file{bar.o}. If @file{bar.o} refers -+to functions in @samp{z}, those functions may not be loaded. -+ -+The linker searches a standard list of directories for the library, -+which is actually a file named @file{lib@var{library}.a}. The linker -+then uses this file as if it had been specified precisely by name. -+ -+The directories searched include several standard system directories -+plus any that you specify with @option{-L}. -+ -+Normally the files found this way are library files---archive files -+whose members are object files. The linker handles an archive file by -+scanning through it for members which define symbols that have so far -+been referenced but not defined. But if the file that is found is an -+ordinary object file, it is linked in the usual fashion. The only -+difference between using an @option{-l} option and specifying a file name -+is that @option{-l} surrounds @var{library} with @samp{lib} and @samp{.a} -+and searches several directories. -+ -+@item -lobjc -+@opindex lobjc -+You need this special case of the @option{-l} option in order to -+link an Objective-C or Objective-C++ program. -+ -+@item -nostartfiles -+@opindex nostartfiles -+Do not use the standard system startup files when linking. -+The standard system libraries are used normally, unless @option{-nostdlib} -+or @option{-nodefaultlibs} is used. -+ -+@item -nodefaultlibs -+@opindex nodefaultlibs -+Do not use the standard system libraries when linking. -+Only the libraries you specify will be passed to the linker. -+The standard startup files are used normally, unless @option{-nostartfiles} -+is used. The compiler may generate calls to @code{memcmp}, -+@code{memset}, @code{memcpy} and @code{memmove}. -+These entries are usually resolved by entries in -+libc. These entry points should be supplied through some other -+mechanism when this option is specified. -+ -+@item -nostdlib -+@opindex nostdlib -+Do not use the standard system startup files or libraries when linking. -+No startup files and only the libraries you specify will be passed to -+the linker. The compiler may generate calls to @code{memcmp}, @code{memset}, -+@code{memcpy} and @code{memmove}. -+These entries are usually resolved by entries in -+libc. These entry points should be supplied through some other -+mechanism when this option is specified. -+ -+@cindex @option{-lgcc}, use with @option{-nostdlib} -+@cindex @option{-nostdlib} and unresolved references -+@cindex unresolved references and @option{-nostdlib} -+@cindex @option{-lgcc}, use with @option{-nodefaultlibs} -+@cindex @option{-nodefaultlibs} and unresolved references -+@cindex unresolved references and @option{-nodefaultlibs} -+One of the standard libraries bypassed by @option{-nostdlib} and -+@option{-nodefaultlibs} is @file{libgcc.a}, a library of internal subroutines -+that GCC uses to overcome shortcomings of particular machines, or special -+needs for some languages. -+(@xref{Interface,,Interfacing to GCC Output,gccint,GNU Compiler -+Collection (GCC) Internals}, -+for more discussion of @file{libgcc.a}.) -+In most cases, you need @file{libgcc.a} even when you want to avoid -+other standard libraries. In other words, when you specify @option{-nostdlib} -+or @option{-nodefaultlibs} you should usually specify @option{-lgcc} as well. -+This ensures that you have no unresolved references to internal GCC -+library subroutines. (For example, @samp{__main}, used to ensure C++ -+constructors will be called; @pxref{Collect2,,@code{collect2}, gccint, -+GNU Compiler Collection (GCC) Internals}.) -+ -+@item -pie -+@opindex pie -+Produce a position independent executable on targets which support it. -+For predictable results, you must also specify the same set of options -+that were used to generate code (@option{-fpie}, @option{-fPIE}, -+or model suboptions) when you specify this option. -+ -+@item -rdynamic -+@opindex rdynamic -+Pass the flag @option{-export-dynamic} to the ELF linker, on targets -+that support it. This instructs the linker to add all symbols, not -+only used ones, to the dynamic symbol table. This option is needed -+for some uses of @code{dlopen} or to allow obtaining backtraces -+from within a program. -+ -+@item -s -+@opindex s -+Remove all symbol table and relocation information from the executable. -+ -+@item -static -+@opindex static -+On systems that support dynamic linking, this prevents linking with the shared -+libraries. On other systems, this option has no effect. -+ -+@item -shared -+@opindex shared -+Produce a shared object which can then be linked with other objects to -+form an executable. Not all systems support this option. For predictable -+results, you must also specify the same set of options that were used to -+generate code (@option{-fpic}, @option{-fPIC}, or model suboptions) -+when you specify this option.@footnote{On some systems, @samp{gcc -shared} -+needs to build supplementary stub code for constructors to work. On -+multi-libbed systems, @samp{gcc -shared} must select the correct support -+libraries to link against. Failing to supply the correct flags may lead -+to subtle defects. Supplying them in cases where they are not necessary -+is innocuous.} -+ -+@item -shared-libgcc -+@itemx -static-libgcc -+@opindex shared-libgcc -+@opindex static-libgcc -+On systems that provide @file{libgcc} as a shared library, these options -+force the use of either the shared or static version respectively. -+If no shared version of @file{libgcc} was built when the compiler was -+configured, these options have no effect. -+ -+There are several situations in which an application should use the -+shared @file{libgcc} instead of the static version. The most common -+of these is when the application wishes to throw and catch exceptions -+across different shared libraries. In that case, each of the libraries -+as well as the application itself should use the shared @file{libgcc}. -+ -+Therefore, the G++ and GCJ drivers automatically add -+@option{-shared-libgcc} whenever you build a shared library or a main -+executable, because C++ and Java programs typically use exceptions, so -+this is the right thing to do. -+ -+If, instead, you use the GCC driver to create shared libraries, you may -+find that they will not always be linked with the shared @file{libgcc}. -+If GCC finds, at its configuration time, that you have a non-GNU linker -+or a GNU linker that does not support option @option{--eh-frame-hdr}, -+it will link the shared version of @file{libgcc} into shared libraries -+by default. Otherwise, it will take advantage of the linker and optimize -+away the linking with the shared version of @file{libgcc}, linking with -+the static version of libgcc by default. This allows exceptions to -+propagate through such shared libraries, without incurring relocation -+costs at library load time. -+ -+However, if a library or main executable is supposed to throw or catch -+exceptions, you must link it using the G++ or GCJ driver, as appropriate -+for the languages used in the program, or using the option -+@option{-shared-libgcc}, such that it is linked with the shared -+@file{libgcc}. -+ -+@item -symbolic -+@opindex symbolic -+Bind references to global symbols when building a shared object. Warn -+about any unresolved references (unless overridden by the link editor -+option @samp{-Xlinker -z -Xlinker defs}). Only a few systems support -+this option. -+ -+@item -T @var{script} -+@opindex T -+@cindex linker script -+Use @var{script} as the linker script. This option is supported by most -+systems using the GNU linker. On some targets, such as bare-board -+targets without an operating system, the @option{-T} option may be required -+when linking to avoid references to undefined symbols. -+ -+@item -Xlinker @var{option} -+@opindex Xlinker -+Pass @var{option} as an option to the linker. You can use this to -+supply system-specific linker options which GCC does not know how to -+recognize. -+ -+If you want to pass an option that takes a separate argument, you must use -+@option{-Xlinker} twice, once for the option and once for the argument. -+For example, to pass @option{-assert definitions}, you must write -+@samp{-Xlinker -assert -Xlinker definitions}. It does not work to write -+@option{-Xlinker "-assert definitions"}, because this passes the entire -+string as a single argument, which is not what the linker expects. -+ -+When using the GNU linker, it is usually more convenient to pass -+arguments to linker options using the @option{@var{option}=@var{value}} -+syntax than as separate arguments. For example, you can specify -+@samp{-Xlinker -Map=output.map} rather than -+@samp{-Xlinker -Map -Xlinker output.map}. Other linkers may not support -+this syntax for command-line options. -+ -+@item -Wl,@var{option} -+@opindex Wl -+Pass @var{option} as an option to the linker. If @var{option} contains -+commas, it is split into multiple options at the commas. You can use this -+syntax to pass an argument to the option. -+For example, @samp{-Wl,-Map,output.map} passes @samp{-Map output.map} to the -+linker. When using the GNU linker, you can also get the same effect with -+@samp{-Wl,-Map=output.map}. -+ -+@item -u @var{symbol} -+@opindex u -+Pretend the symbol @var{symbol} is undefined, to force linking of -+library modules to define it. You can use @option{-u} multiple times with -+different symbols to force loading of additional library modules. -+@end table -+ -+@node Directory Options -+@section Options for Directory Search -+@cindex directory options -+@cindex options, directory search -+@cindex search path -+ -+These options specify directories to search for header files, for -+libraries and for parts of the compiler: -+ -+@table @gcctabopt -+@item -I@var{dir} -+@opindex I -+Add the directory @var{dir} to the head of the list of directories to be -+searched for header files. This can be used to override a system header -+file, substituting your own version, since these directories are -+searched before the system header file directories. However, you should -+not use this option to add directories that contain vendor-supplied -+system header files (use @option{-isystem} for that). If you use more than -+one @option{-I} option, the directories are scanned in left-to-right -+order; the standard system directories come after. -+ -+If a standard system include directory, or a directory specified with -+@option{-isystem}, is also specified with @option{-I}, the @option{-I} -+option will be ignored. The directory will still be searched but as a -+system directory at its normal position in the system include chain. -+This is to ensure that GCC's procedure to fix buggy system headers and -+the ordering for the include_next directive are not inadvertently changed. -+If you really need to change the search order for system directories, -+use the @option{-nostdinc} and/or @option{-isystem} options. -+ -+@item -iquote@var{dir} -+@opindex iquote -+Add the directory @var{dir} to the head of the list of directories to -+be searched for header files only for the case of @samp{#include -+"@var{file}"}; they are not searched for @samp{#include <@var{file}>}, -+otherwise just like @option{-I}. -+ -+@item -L@var{dir} -+@opindex L -+Add directory @var{dir} to the list of directories to be searched -+for @option{-l}. -+ -+@item -B@var{prefix} -+@opindex B -+This option specifies where to find the executables, libraries, -+include files, and data files of the compiler itself. -+ -+The compiler driver program runs one or more of the subprograms -+@file{cpp}, @file{cc1}, @file{as} and @file{ld}. It tries -+@var{prefix} as a prefix for each program it tries to run, both with and -+without @samp{@var{machine}/@var{version}/} (@pxref{Target Options}). -+ -+For each subprogram to be run, the compiler driver first tries the -+@option{-B} prefix, if any. If that name is not found, or if @option{-B} -+was not specified, the driver tries two standard prefixes, which are -+@file{/usr/lib/gcc/} and @file{/usr/local/lib/gcc/}. If neither of -+those results in a file name that is found, the unmodified program -+name is searched for using the directories specified in your -+@env{PATH} environment variable. -+ -+The compiler will check to see if the path provided by the @option{-B} -+refers to a directory, and if necessary it will add a directory -+separator character at the end of the path. -+ -+@option{-B} prefixes that effectively specify directory names also apply -+to libraries in the linker, because the compiler translates these -+options into @option{-L} options for the linker. They also apply to -+includes files in the preprocessor, because the compiler translates these -+options into @option{-isystem} options for the preprocessor. In this case, -+the compiler appends @samp{include} to the prefix. -+ -+The run-time support file @file{libgcc.a} can also be searched for using -+the @option{-B} prefix, if needed. If it is not found there, the two -+standard prefixes above are tried, and that is all. The file is left -+out of the link if it is not found by those means. -+ -+Another way to specify a prefix much like the @option{-B} prefix is to use -+the environment variable @env{GCC_EXEC_PREFIX}. @xref{Environment -+Variables}. -+ -+As a special kludge, if the path provided by @option{-B} is -+@file{[dir/]stage@var{N}/}, where @var{N} is a number in the range 0 to -+9, then it will be replaced by @file{[dir/]include}. This is to help -+with boot-strapping the compiler. -+ -+@item -specs=@var{file} -+@opindex specs -+Process @var{file} after the compiler reads in the standard @file{specs} -+file, in order to override the defaults that the @file{gcc} driver -+program uses when determining what switches to pass to @file{cc1}, -+@file{cc1plus}, @file{as}, @file{ld}, etc. More than one -+@option{-specs=@var{file}} can be specified on the command line, and they -+are processed in order, from left to right. -+ -+@item --sysroot=@var{dir} -+@opindex sysroot -+Use @var{dir} as the logical root directory for headers and libraries. -+For example, if the compiler would normally search for headers in -+@file{/usr/include} and libraries in @file{/usr/lib}, it will instead -+search @file{@var{dir}/usr/include} and @file{@var{dir}/usr/lib}. -+ -+If you use both this option and the @option{-isysroot} option, then -+the @option{--sysroot} option will apply to libraries, but the -+@option{-isysroot} option will apply to header files. -+ -+The GNU linker (beginning with version 2.16) has the necessary support -+for this option. If your linker does not support this option, the -+header file aspect of @option{--sysroot} will still work, but the -+library aspect will not. -+ -+@item -I- -+@opindex I- -+This option has been deprecated. Please use @option{-iquote} instead for -+@option{-I} directories before the @option{-I-} and remove the @option{-I-}. -+Any directories you specify with @option{-I} options before the @option{-I-} -+option are searched only for the case of @samp{#include "@var{file}"}; -+they are not searched for @samp{#include <@var{file}>}. -+ -+If additional directories are specified with @option{-I} options after -+the @option{-I-}, these directories are searched for all @samp{#include} -+directives. (Ordinarily @emph{all} @option{-I} directories are used -+this way.) -+ -+In addition, the @option{-I-} option inhibits the use of the current -+directory (where the current input file came from) as the first search -+directory for @samp{#include "@var{file}"}. There is no way to -+override this effect of @option{-I-}. With @option{-I.} you can specify -+searching the directory which was current when the compiler was -+invoked. That is not exactly the same as what the preprocessor does -+by default, but it is often satisfactory. -+ -+@option{-I-} does not inhibit the use of the standard system directories -+for header files. Thus, @option{-I-} and @option{-nostdinc} are -+independent. -+@end table -+ -+@c man end -+ -+@node Spec Files -+@section Specifying subprocesses and the switches to pass to them -+@cindex Spec Files -+ -+@command{gcc} is a driver program. It performs its job by invoking a -+sequence of other programs to do the work of compiling, assembling and -+linking. GCC interprets its command-line parameters and uses these to -+deduce which programs it should invoke, and which command-line options -+it ought to place on their command lines. This behavior is controlled -+by @dfn{spec strings}. In most cases there is one spec string for each -+program that GCC can invoke, but a few programs have multiple spec -+strings to control their behavior. The spec strings built into GCC can -+be overridden by using the @option{-specs=} command-line switch to specify -+a spec file. -+ -+@dfn{Spec files} are plaintext files that are used to construct spec -+strings. They consist of a sequence of directives separated by blank -+lines. The type of directive is determined by the first non-whitespace -+character on the line and it can be one of the following: -+ -+@table @code -+@item %@var{command} -+Issues a @var{command} to the spec file processor. The commands that can -+appear here are: -+ -+@table @code -+@item %include <@var{file}> -+@cindex %include -+Search for @var{file} and insert its text at the current point in the -+specs file. -+ -+@item %include_noerr <@var{file}> -+@cindex %include_noerr -+Just like @samp{%include}, but do not generate an error message if the include -+file cannot be found. -+ -+@item %rename @var{old_name} @var{new_name} -+@cindex %rename -+Rename the spec string @var{old_name} to @var{new_name}. -+ -+@end table -+ -+@item *[@var{spec_name}]: -+This tells the compiler to create, override or delete the named spec -+string. All lines after this directive up to the next directive or -+blank line are considered to be the text for the spec string. If this -+results in an empty string then the spec will be deleted. (Or, if the -+spec did not exist, then nothing will happened.) Otherwise, if the spec -+does not currently exist a new spec will be created. If the spec does -+exist then its contents will be overridden by the text of this -+directive, unless the first character of that text is the @samp{+} -+character, in which case the text will be appended to the spec. -+ -+@item [@var{suffix}]: -+Creates a new @samp{[@var{suffix}] spec} pair. All lines after this directive -+and up to the next directive or blank line are considered to make up the -+spec string for the indicated suffix. When the compiler encounters an -+input file with the named suffix, it will processes the spec string in -+order to work out how to compile that file. For example: -+ -+@smallexample -+.ZZ: -+z-compile -input %i -+@end smallexample -+ -+This says that any input file whose name ends in @samp{.ZZ} should be -+passed to the program @samp{z-compile}, which should be invoked with the -+command-line switch @option{-input} and with the result of performing the -+@samp{%i} substitution. (See below.) -+ -+As an alternative to providing a spec string, the text that follows a -+suffix directive can be one of the following: -+ -+@table @code -+@item @@@var{language} -+This says that the suffix is an alias for a known @var{language}. This is -+similar to using the @option{-x} command-line switch to GCC to specify a -+language explicitly. For example: -+ -+@smallexample -+.ZZ: -+@@c++ -+@end smallexample -+ -+Says that .ZZ files are, in fact, C++ source files. -+ -+@item #@var{name} -+This causes an error messages saying: -+ -+@smallexample -+@var{name} compiler not installed on this system. -+@end smallexample -+@end table -+ -+GCC already has an extensive list of suffixes built into it. -+This directive will add an entry to the end of the list of suffixes, but -+since the list is searched from the end backwards, it is effectively -+possible to override earlier entries using this technique. -+ -+@end table -+ -+GCC has the following spec strings built into it. Spec files can -+override these strings or create their own. Note that individual -+targets can also add their own spec strings to this list. -+ -+@smallexample -+asm Options to pass to the assembler -+asm_final Options to pass to the assembler post-processor -+cpp Options to pass to the C preprocessor -+cc1 Options to pass to the C compiler -+cc1plus Options to pass to the C++ compiler -+endfile Object files to include at the end of the link -+link Options to pass to the linker -+lib Libraries to include on the command line to the linker -+libgcc Decides which GCC support library to pass to the linker -+linker Sets the name of the linker -+predefines Defines to be passed to the C preprocessor -+signed_char Defines to pass to CPP to say whether @code{char} is signed -+ by default -+startfile Object files to include at the start of the link -+@end smallexample -+ -+Here is a small example of a spec file: -+ -+@smallexample -+%rename lib old_lib -+ -+*lib: -+--start-group -lgcc -lc -leval1 --end-group %(old_lib) -+@end smallexample -+ -+This example renames the spec called @samp{lib} to @samp{old_lib} and -+then overrides the previous definition of @samp{lib} with a new one. -+The new definition adds in some extra command-line options before -+including the text of the old definition. -+ -+@dfn{Spec strings} are a list of command-line options to be passed to their -+corresponding program. In addition, the spec strings can contain -+@samp{%}-prefixed sequences to substitute variable text or to -+conditionally insert text into the command line. Using these constructs -+it is possible to generate quite complex command lines. -+ -+Here is a table of all defined @samp{%}-sequences for spec -+strings. Note that spaces are not generated automatically around the -+results of expanding these sequences. Therefore you can concatenate them -+together or combine them with constant text in a single argument. -+ -+@table @code -+@item %% -+Substitute one @samp{%} into the program name or argument. -+ -+@item %i -+Substitute the name of the input file being processed. -+ -+@item %b -+Substitute the basename of the input file being processed. -+This is the substring up to (and not including) the last period -+and not including the directory. -+ -+@item %B -+This is the same as @samp{%b}, but include the file suffix (text after -+the last period). -+ -+@item %d -+Marks the argument containing or following the @samp{%d} as a -+temporary file name, so that that file will be deleted if GCC exits -+successfully. Unlike @samp{%g}, this contributes no text to the -+argument. -+ -+@item %g@var{suffix} -+Substitute a file name that has suffix @var{suffix} and is chosen -+once per compilation, and mark the argument in the same way as -+@samp{%d}. To reduce exposure to denial-of-service attacks, the file -+name is now chosen in a way that is hard to predict even when previously -+chosen file names are known. For example, @samp{%g.s @dots{} %g.o @dots{} %g.s} -+might turn into @samp{ccUVUUAU.s ccXYAXZ12.o ccUVUUAU.s}. @var{suffix} matches -+the regexp @samp{[.A-Za-z]*} or the special string @samp{%O}, which is -+treated exactly as if @samp{%O} had been preprocessed. Previously, @samp{%g} -+was simply substituted with a file name chosen once per compilation, -+without regard to any appended suffix (which was therefore treated -+just like ordinary text), making such attacks more likely to succeed. -+ -+@item %u@var{suffix} -+Like @samp{%g}, but generates a new temporary file name even if -+@samp{%u@var{suffix}} was already seen. -+ -+@item %U@var{suffix} -+Substitutes the last file name generated with @samp{%u@var{suffix}}, generating a -+new one if there is no such last file name. In the absence of any -+@samp{%u@var{suffix}}, this is just like @samp{%g@var{suffix}}, except they don't share -+the same suffix @emph{space}, so @samp{%g.s @dots{} %U.s @dots{} %g.s @dots{} %U.s} -+would involve the generation of two distinct file names, one -+for each @samp{%g.s} and another for each @samp{%U.s}. Previously, @samp{%U} was -+simply substituted with a file name chosen for the previous @samp{%u}, -+without regard to any appended suffix. -+ -+@item %j@var{suffix} -+Substitutes the name of the @code{HOST_BIT_BUCKET}, if any, and if it is -+writable, and if save-temps is off; otherwise, substitute the name -+of a temporary file, just like @samp{%u}. This temporary file is not -+meant for communication between processes, but rather as a junk -+disposal mechanism. -+ -+@item %|@var{suffix} -+@itemx %m@var{suffix} -+Like @samp{%g}, except if @option{-pipe} is in effect. In that case -+@samp{%|} substitutes a single dash and @samp{%m} substitutes nothing at -+all. These are the two most common ways to instruct a program that it -+should read from standard input or write to standard output. If you -+need something more elaborate you can use an @samp{%@{pipe:@code{X}@}} -+construct: see for example @file{f/lang-specs.h}. -+ -+@item %.@var{SUFFIX} -+Substitutes @var{.SUFFIX} for the suffixes of a matched switch's args -+when it is subsequently output with @samp{%*}. @var{SUFFIX} is -+terminated by the next space or %. -+ -+@item %w -+Marks the argument containing or following the @samp{%w} as the -+designated output file of this compilation. This puts the argument -+into the sequence of arguments that @samp{%o} will substitute later. -+ -+@item %o -+Substitutes the names of all the output files, with spaces -+automatically placed around them. You should write spaces -+around the @samp{%o} as well or the results are undefined. -+@samp{%o} is for use in the specs for running the linker. -+Input files whose names have no recognized suffix are not compiled -+at all, but they are included among the output files, so they will -+be linked. -+ -+@item %O -+Substitutes the suffix for object files. Note that this is -+handled specially when it immediately follows @samp{%g, %u, or %U}, -+because of the need for those to form complete file names. The -+handling is such that @samp{%O} is treated exactly as if it had already -+been substituted, except that @samp{%g, %u, and %U} do not currently -+support additional @var{suffix} characters following @samp{%O} as they would -+following, for example, @samp{.o}. -+ -+@item %p -+Substitutes the standard macro predefinitions for the -+current target machine. Use this when running @code{cpp}. -+ -+@item %P -+Like @samp{%p}, but puts @samp{__} before and after the name of each -+predefined macro, except for macros that start with @samp{__} or with -+@samp{_@var{L}}, where @var{L} is an uppercase letter. This is for ISO -+C@. -+ -+@item %I -+Substitute any of @option{-iprefix} (made from @env{GCC_EXEC_PREFIX}), -+@option{-isysroot} (made from @env{TARGET_SYSTEM_ROOT}), -+@option{-isystem} (made from @env{COMPILER_PATH} and @option{-B} options) -+and @option{-imultilib} as necessary. -+ -+@item %s -+Current argument is the name of a library or startup file of some sort. -+Search for that file in a standard list of directories and substitute -+the full name found. -+ -+@item %e@var{str} -+Print @var{str} as an error message. @var{str} is terminated by a newline. -+Use this when inconsistent options are detected. -+ -+@item %(@var{name}) -+Substitute the contents of spec string @var{name} at this point. -+ -+@item %[@var{name}] -+Like @samp{%(@dots{})} but put @samp{__} around @option{-D} arguments. -+ -+@item %x@{@var{option}@} -+Accumulate an option for @samp{%X}. -+ -+@item %X -+Output the accumulated linker options specified by @option{-Wl} or a @samp{%x} -+spec string. -+ -+@item %Y -+Output the accumulated assembler options specified by @option{-Wa}. -+ -+@item %Z -+Output the accumulated preprocessor options specified by @option{-Wp}. -+ -+@item %a -+Process the @code{asm} spec. This is used to compute the -+switches to be passed to the assembler. -+ -+@item %A -+Process the @code{asm_final} spec. This is a spec string for -+passing switches to an assembler post-processor, if such a program is -+needed. -+ -+@item %l -+Process the @code{link} spec. This is the spec for computing the -+command line passed to the linker. Typically it will make use of the -+@samp{%L %G %S %D and %E} sequences. -+ -+@item %D -+Dump out a @option{-L} option for each directory that GCC believes might -+contain startup files. If the target supports multilibs then the -+current multilib directory will be prepended to each of these paths. -+ -+@item %L -+Process the @code{lib} spec. This is a spec string for deciding which -+libraries should be included on the command line to the linker. -+ -+@item %G -+Process the @code{libgcc} spec. This is a spec string for deciding -+which GCC support library should be included on the command line to the linker. -+ -+@item %S -+Process the @code{startfile} spec. This is a spec for deciding which -+object files should be the first ones passed to the linker. Typically -+this might be a file named @file{crt0.o}. -+ -+@item %E -+Process the @code{endfile} spec. This is a spec string that specifies -+the last object files that will be passed to the linker. -+ -+@item %C -+Process the @code{cpp} spec. This is used to construct the arguments -+to be passed to the C preprocessor. -+ -+@item %1 -+Process the @code{cc1} spec. This is used to construct the options to be -+passed to the actual C compiler (@samp{cc1}). -+ -+@item %2 -+Process the @code{cc1plus} spec. This is used to construct the options to be -+passed to the actual C++ compiler (@samp{cc1plus}). -+ -+@item %* -+Substitute the variable part of a matched option. See below. -+Note that each comma in the substituted string is replaced by -+a single space. -+ -+@item %<@code{S} -+Remove all occurrences of @code{-S} from the command line. Note---this -+command is position dependent. @samp{%} commands in the spec string -+before this one will see @code{-S}, @samp{%} commands in the spec string -+after this one will not. -+ -+@item %:@var{function}(@var{args}) -+Call the named function @var{function}, passing it @var{args}. -+@var{args} is first processed as a nested spec string, then split -+into an argument vector in the usual fashion. The function returns -+a string which is processed as if it had appeared literally as part -+of the current spec. -+ -+The following built-in spec functions are provided: -+ -+@table @code -+@item @code{getenv} -+The @code{getenv} spec function takes two arguments: an environment -+variable name and a string. If the environment variable is not -+defined, a fatal error is issued. Otherwise, the return value is the -+value of the environment variable concatenated with the string. For -+example, if @env{TOPDIR} is defined as @file{/path/to/top}, then: -+ -+@smallexample -+%:getenv(TOPDIR /include) -+@end smallexample -+ -+expands to @file{/path/to/top/include}. -+ -+@item @code{if-exists} -+The @code{if-exists} spec function takes one argument, an absolute -+pathname to a file. If the file exists, @code{if-exists} returns the -+pathname. Here is a small example of its usage: -+ -+@smallexample -+*startfile: -+crt0%O%s %:if-exists(crti%O%s) crtbegin%O%s -+@end smallexample -+ -+@item @code{if-exists-else} -+The @code{if-exists-else} spec function is similar to the @code{if-exists} -+spec function, except that it takes two arguments. The first argument is -+an absolute pathname to a file. If the file exists, @code{if-exists-else} -+returns the pathname. If it does not exist, it returns the second argument. -+This way, @code{if-exists-else} can be used to select one file or another, -+based on the existence of the first. Here is a small example of its usage: -+ -+@smallexample -+*startfile: -+crt0%O%s %:if-exists(crti%O%s) \ -+%:if-exists-else(crtbeginT%O%s crtbegin%O%s) -+@end smallexample -+ -+@item @code{replace-outfile} -+The @code{replace-outfile} spec function takes two arguments. It looks for the -+first argument in the outfiles array and replaces it with the second argument. Here -+is a small example of its usage: -+ -+@smallexample -+%@{fgnu-runtime:%:replace-outfile(-lobjc -lobjc-gnu)@} -+@end smallexample -+ -+@item @code{print-asm-header} -+The @code{print-asm-header} function takes no arguments and simply -+prints a banner like: -+ -+@smallexample -+Assembler options -+================= -+ -+Use "-Wa,OPTION" to pass "OPTION" to the assembler. -+@end smallexample -+ -+It is used to separate compiler options from assembler options -+in the @option{--target-help} output. -+@end table -+ -+@item %@{@code{S}@} -+Substitutes the @code{-S} switch, if that switch was given to GCC@. -+If that switch was not specified, this substitutes nothing. Note that -+the leading dash is omitted when specifying this option, and it is -+automatically inserted if the substitution is performed. Thus the spec -+string @samp{%@{foo@}} would match the command-line option @option{-foo} -+and would output the command line option @option{-foo}. -+ -+@item %W@{@code{S}@} -+Like %@{@code{S}@} but mark last argument supplied within as a file to be -+deleted on failure. -+ -+@item %@{@code{S}*@} -+Substitutes all the switches specified to GCC whose names start -+with @code{-S}, but which also take an argument. This is used for -+switches like @option{-o}, @option{-D}, @option{-I}, etc. -+GCC considers @option{-o foo} as being -+one switch whose names starts with @samp{o}. %@{o*@} would substitute this -+text, including the space. Thus two arguments would be generated. -+ -+@item %@{@code{S}*&@code{T}*@} -+Like %@{@code{S}*@}, but preserve order of @code{S} and @code{T} options -+(the order of @code{S} and @code{T} in the spec is not significant). -+There can be any number of ampersand-separated variables; for each the -+wild card is optional. Useful for CPP as @samp{%@{D*&U*&A*@}}. -+ -+@item %@{@code{S}:@code{X}@} -+Substitutes @code{X}, if the @samp{-S} switch was given to GCC@. -+ -+@item %@{!@code{S}:@code{X}@} -+Substitutes @code{X}, if the @samp{-S} switch was @emph{not} given to GCC@. -+ -+@item %@{@code{S}*:@code{X}@} -+Substitutes @code{X} if one or more switches whose names start with -+@code{-S} are specified to GCC@. Normally @code{X} is substituted only -+once, no matter how many such switches appeared. However, if @code{%*} -+appears somewhere in @code{X}, then @code{X} will be substituted once -+for each matching switch, with the @code{%*} replaced by the part of -+that switch that matched the @code{*}. -+ -+@item %@{.@code{S}:@code{X}@} -+Substitutes @code{X}, if processing a file with suffix @code{S}. -+ -+@item %@{!.@code{S}:@code{X}@} -+Substitutes @code{X}, if @emph{not} processing a file with suffix @code{S}. -+ -+@item %@{,@code{S}:@code{X}@} -+Substitutes @code{X}, if processing a file for language @code{S}. -+ -+@item %@{!,@code{S}:@code{X}@} -+Substitutes @code{X}, if not processing a file for language @code{S}. -+ -+@item %@{@code{S}|@code{P}:@code{X}@} -+Substitutes @code{X} if either @code{-S} or @code{-P} was given to -+GCC@. This may be combined with @samp{!}, @samp{.}, @samp{,}, and -+@code{*} sequences as well, although they have a stronger binding than -+the @samp{|}. If @code{%*} appears in @code{X}, all of the -+alternatives must be starred, and only the first matching alternative -+is substituted. -+ -+For example, a spec string like this: -+ -+@smallexample -+%@{.c:-foo@} %@{!.c:-bar@} %@{.c|d:-baz@} %@{!.c|d:-boggle@} -+@end smallexample -+ -+will output the following command-line options from the following input -+command-line options: -+ -+@smallexample -+fred.c -foo -baz -+jim.d -bar -boggle -+-d fred.c -foo -baz -boggle -+-d jim.d -bar -baz -boggle -+@end smallexample -+ -+@item %@{S:X; T:Y; :D@} -+ -+If @code{S} was given to GCC, substitutes @code{X}; else if @code{T} was -+given to GCC, substitutes @code{Y}; else substitutes @code{D}. There can -+be as many clauses as you need. This may be combined with @code{.}, -+@code{,}, @code{!}, @code{|}, and @code{*} as needed. -+ -+ -+@end table -+ -+The conditional text @code{X} in a %@{@code{S}:@code{X}@} or similar -+construct may contain other nested @samp{%} constructs or spaces, or -+even newlines. They are processed as usual, as described above. -+Trailing white space in @code{X} is ignored. White space may also -+appear anywhere on the left side of the colon in these constructs, -+except between @code{.} or @code{*} and the corresponding word. -+ -+The @option{-O}, @option{-f}, @option{-m}, and @option{-W} switches are -+handled specifically in these constructs. If another value of -+@option{-O} or the negated form of a @option{-f}, @option{-m}, or -+@option{-W} switch is found later in the command line, the earlier -+switch value is ignored, except with @{@code{S}*@} where @code{S} is -+just one letter, which passes all matching options. -+ -+The character @samp{|} at the beginning of the predicate text is used to -+indicate that a command should be piped to the following command, but -+only if @option{-pipe} is specified. -+ -+It is built into GCC which switches take arguments and which do not. -+(You might think it would be useful to generalize this to allow each -+compiler's spec to say which switches take arguments. But this cannot -+be done in a consistent fashion. GCC cannot even decide which input -+files have been specified without knowing which switches take arguments, -+and it must know which input files to compile in order to tell which -+compilers to run). -+ -+GCC also knows implicitly that arguments starting in @option{-l} are to be -+treated as compiler output files, and passed to the linker in their -+proper position among the other output files. -+ -+@c man begin OPTIONS -+ -+@node Target Options -+@section Specifying Target Machine and Compiler Version -+@cindex target options -+@cindex cross compiling -+@cindex specifying machine version -+@cindex specifying compiler version and target machine -+@cindex compiler version, specifying -+@cindex target machine, specifying -+ -+The usual way to run GCC is to run the executable called @file{gcc}, or -+@file{<machine>-gcc} when cross-compiling, or -+@file{<machine>-gcc-<version>} to run a version other than the one that -+was installed last. Sometimes this is inconvenient, so GCC provides -+options that will switch to another cross-compiler or version. -+ -+@table @gcctabopt -+@item -b @var{machine} -+@opindex b -+The argument @var{machine} specifies the target machine for compilation. -+ -+The value to use for @var{machine} is the same as was specified as the -+machine type when configuring GCC as a cross-compiler. For -+example, if a cross-compiler was configured with @samp{configure -+arm-elf}, meaning to compile for an arm processor with elf binaries, -+then you would specify @option{-b arm-elf} to run that cross compiler. -+Because there are other options beginning with @option{-b}, the -+configuration must contain a hyphen, or @option{-b} alone should be one -+argument followed by the configuration in the next argument. -+ -+@item -V @var{version} -+@opindex V -+The argument @var{version} specifies which version of GCC to run. -+This is useful when multiple versions are installed. For example, -+@var{version} might be @samp{4.0}, meaning to run GCC version 4.0. -+@end table -+ -+The @option{-V} and @option{-b} options work by running the -+@file{<machine>-gcc-<version>} executable, so there's no real reason to -+use them if you can just run that directly. -+ -+@node Submodel Options -+@section Hardware Models and Configurations -+@cindex submodel options -+@cindex specifying hardware config -+@cindex hardware models and configurations, specifying -+@cindex machine dependent options -+ -+Earlier we discussed the standard option @option{-b} which chooses among -+different installed compilers for completely different target -+machines, such as VAX vs.@: 68000 vs.@: 80386. -+ -+In addition, each of these target machine types can have its own -+special options, starting with @samp{-m}, to choose among various -+hardware models or configurations---for example, 68010 vs 68020, -+floating coprocessor or none. A single installed version of the -+compiler can compile for any model or configuration, according to the -+options specified. -+ -+Some configurations of the compiler also support additional special -+options, usually for compatibility with other compilers on the same -+platform. -+ -+@c This list is ordered alphanumerically by subsection name. -+@c It should be the same order and spelling as these options are listed -+@c in Machine Dependent Options -+ -+@menu -+* ARC Options:: -+* ARM Options:: -+* AVR Options:: -+* Blackfin Options:: -+* CRIS Options:: -+* CRX Options:: -+* Darwin Options:: -+* DEC Alpha Options:: -+* DEC Alpha/VMS Options:: -+* FR30 Options:: -+* FRV Options:: -+* GNU/Linux Options:: -+* H8/300 Options:: -+* HPPA Options:: -+* i386 and x86-64 Options:: -+* i386 and x86-64 Windows Options:: -+* IA-64 Options:: -+* M32C Options:: -+* M32R/D Options:: -+* M680x0 Options:: -+* M68hc1x Options:: -+* MCore Options:: -+* MIPS Options:: -+* MMIX Options:: -+* MN10300 Options:: -+* PDP-11 Options:: -+* picoChip Options:: -+* PowerPC Options:: -+* RS/6000 and PowerPC Options:: -+* S/390 and zSeries Options:: -+* Score Options:: -+* SH Options:: -+* SPARC Options:: -+* SPU Options:: -+* System V Options:: -+* V850 Options:: -+* VAX Options:: -+* VxWorks Options:: -+* x86-64 Options:: -+* Xstormy16 Options:: -+* Xtensa Options:: -+* zSeries Options:: -+@end menu -+ -+@node ARC Options -+@subsection ARC Options -+@cindex ARC Options -+ -+These options are defined for ARC implementations: -+ -+@table @gcctabopt -+@item -EL -+@opindex EL -+Compile code for little endian mode. This is the default. -+ -+@item -EB -+@opindex EB -+Compile code for big endian mode. -+ -+@item -mmangle-cpu -+@opindex mmangle-cpu -+Prepend the name of the cpu to all public symbol names. -+In multiple-processor systems, there are many ARC variants with different -+instruction and register set characteristics. This flag prevents code -+compiled for one cpu to be linked with code compiled for another. -+No facility exists for handling variants that are ``almost identical''. -+This is an all or nothing option. -+ -+@item -mcpu=@var{cpu} -+@opindex mcpu -+Compile code for ARC variant @var{cpu}. -+Which variants are supported depend on the configuration. -+All variants support @option{-mcpu=base}, this is the default. -+ -+@item -mtext=@var{text-section} -+@itemx -mdata=@var{data-section} -+@itemx -mrodata=@var{readonly-data-section} -+@opindex mtext -+@opindex mdata -+@opindex mrodata -+Put functions, data, and readonly data in @var{text-section}, -+@var{data-section}, and @var{readonly-data-section} respectively -+by default. This can be overridden with the @code{section} attribute. -+@xref{Variable Attributes}. -+ -+@item -mfix-cortex-m3-ldrd -+@opindex mfix-cortex-m3-ldrd -+Some Cortex-M3 cores can cause data corruption when @code{ldrd} instructions -+with overlapping destination and base registers are used. This option avoids -+generating these instructions. This option is enabled by default when -+@option{-mcpu=cortex-m3} is specified. -+ -+@end table -+ -+@node ARM Options -+@subsection ARM Options -+@cindex ARM options -+ -+These @samp{-m} options are defined for Advanced RISC Machines (ARM) -+architectures: -+ -+@table @gcctabopt -+@item -mabi=@var{name} -+@opindex mabi -+Generate code for the specified ABI@. Permissible values are: @samp{apcs-gnu}, -+@samp{atpcs}, @samp{aapcs}, @samp{aapcs-linux} and @samp{iwmmxt}. -+ -+@item -mapcs-frame -+@opindex mapcs-frame -+Generate a stack frame that is compliant with the ARM Procedure Call -+Standard for all functions, even if this is not strictly necessary for -+correct execution of the code. Specifying @option{-fomit-frame-pointer} -+with this option will cause the stack frames not to be generated for -+leaf functions. The default is @option{-mno-apcs-frame}. -+ -+@item -mapcs -+@opindex mapcs -+This is a synonym for @option{-mapcs-frame}. -+ -+@ignore -+@c not currently implemented -+@item -mapcs-stack-check -+@opindex mapcs-stack-check -+Generate code to check the amount of stack space available upon entry to -+every function (that actually uses some stack space). If there is -+insufficient space available then either the function -+@samp{__rt_stkovf_split_small} or @samp{__rt_stkovf_split_big} will be -+called, depending upon the amount of stack space required. The run time -+system is required to provide these functions. The default is -+@option{-mno-apcs-stack-check}, since this produces smaller code. -+ -+@c not currently implemented -+@item -mapcs-float -+@opindex mapcs-float -+Pass floating point arguments using the float point registers. This is -+one of the variants of the APCS@. This option is recommended if the -+target hardware has a floating point unit or if a lot of floating point -+arithmetic is going to be performed by the code. The default is -+@option{-mno-apcs-float}, since integer only code is slightly increased in -+size if @option{-mapcs-float} is used. -+ -+@c not currently implemented -+@item -mapcs-reentrant -+@opindex mapcs-reentrant -+Generate reentrant, position independent code. The default is -+@option{-mno-apcs-reentrant}. -+@end ignore -+ -+@item -mthumb-interwork -+@opindex mthumb-interwork -+Generate code which supports calling between the ARM and Thumb -+instruction sets. Without this option the two instruction sets cannot -+be reliably used inside one program. The default is -+@option{-mno-thumb-interwork}, since slightly larger code is generated -+when @option{-mthumb-interwork} is specified. -+ -+@item -mno-sched-prolog -+@opindex mno-sched-prolog -+Prevent the reordering of instructions in the function prolog, or the -+merging of those instruction with the instructions in the function's -+body. This means that all functions will start with a recognizable set -+of instructions (or in fact one of a choice from a small set of -+different function prologues), and this information can be used to -+locate the start if functions inside an executable piece of code. The -+default is @option{-msched-prolog}. -+ -+@item -mfloat-abi=@var{name} -+@opindex mfloat-abi -+Specifies which floating-point ABI to use. Permissible values -+are: @samp{soft}, @samp{softfp} and @samp{hard}. -+ -+Specifying @samp{soft} causes GCC to generate output containing -+library calls for floating-point operations. -+@samp{softfp} allows the generation of code using hardware floating-point -+instructions, but still uses the soft-float calling conventions. -+@samp{hard} allows generation of floating-point instructions -+and uses FPU-specific calling conventions. -+ -+Using @option{-mfloat-abi=hard} with VFP coprocessors is not supported. -+Use @option{-mfloat-abi=softfp} with the appropriate @option{-mfpu} option -+to allow the compiler to generate code that makes use of the hardware -+floating-point capabilities for these CPUs. -+ -+The default depends on the specific target configuration. Note that -+the hard-float and soft-float ABIs are not link-compatible; you must -+compile your entire program with the same ABI, and link with a -+compatible set of libraries. -+ -+@item -mhard-float -+@opindex mhard-float -+Equivalent to @option{-mfloat-abi=hard}. -+ -+@item -msoft-float -+@opindex msoft-float -+Equivalent to @option{-mfloat-abi=soft}. -+ -+@item -mlittle-endian -+@opindex mlittle-endian -+Generate code for a processor running in little-endian mode. This is -+the default for all standard configurations. -+ -+@item -mbig-endian -+@opindex mbig-endian -+Generate code for a processor running in big-endian mode; the default is -+to compile code for a little-endian processor. -+ -+@item -mwords-little-endian -+@opindex mwords-little-endian -+This option only applies when generating code for big-endian processors. -+Generate code for a little-endian word order but a big-endian byte -+order. That is, a byte order of the form @samp{32107654}. Note: this -+option should only be used if you require compatibility with code for -+big-endian ARM processors generated by versions of the compiler prior to -+2.8. -+ -+@item -mcpu=@var{name} -+@opindex mcpu -+This specifies the name of the target ARM processor. GCC uses this name -+to determine what kind of instructions it can emit when generating -+assembly code. Permissible names are: @samp{arm2}, @samp{arm250}, -+@samp{arm3}, @samp{arm6}, @samp{arm60}, @samp{arm600}, @samp{arm610}, -+@samp{arm620}, @samp{arm7}, @samp{arm7m}, @samp{arm7d}, @samp{arm7dm}, -+@samp{arm7di}, @samp{arm7dmi}, @samp{arm70}, @samp{arm700}, -+@samp{arm700i}, @samp{arm710}, @samp{arm710c}, @samp{arm7100}, -+@samp{arm720}, -+@samp{arm7500}, @samp{arm7500fe}, @samp{arm7tdmi}, @samp{arm7tdmi-s}, -+@samp{arm710t}, @samp{arm720t}, @samp{arm740t}, -+@samp{strongarm}, @samp{strongarm110}, @samp{strongarm1100}, -+@samp{strongarm1110}, -+@samp{arm8}, @samp{arm810}, @samp{arm9}, @samp{arm9e}, @samp{arm920}, -+@samp{arm920t}, @samp{arm922t}, @samp{arm946e-s}, @samp{arm966e-s}, -+@samp{arm968e-s}, @samp{arm926ej-s}, @samp{arm940t}, @samp{arm9tdmi}, -+@samp{arm10tdmi}, @samp{arm1020t}, @samp{arm1026ej-s}, -+@samp{arm10e}, @samp{arm1020e}, @samp{arm1022e}, -+@samp{arm1136j-s}, @samp{arm1136jf-s}, @samp{mpcore}, @samp{mpcorenovfp}, -+@samp{arm1156t2-s}, @samp{arm1176jz-s}, @samp{arm1176jzf-s}, -+@samp{cortex-a8}, @samp{cortex-a9}, -+@samp{cortex-r4}, @samp{cortex-r4f}, @samp{cortex-m3}, -+@samp{cortex-m1}, -+@samp{xscale}, @samp{iwmmxt}, @samp{iwmmxt2}, @samp{ep9312}. -+ -+@item -mtune=@var{name} -+@opindex mtune -+This option is very similar to the @option{-mcpu=} option, except that -+instead of specifying the actual target processor type, and hence -+restricting which instructions can be used, it specifies that GCC should -+tune the performance of the code as if the target were of the type -+specified in this option, but still choosing the instructions that it -+will generate based on the cpu specified by a @option{-mcpu=} option. -+For some ARM implementations better performance can be obtained by using -+this option. -+ -+@item -march=@var{name} -+@opindex march -+This specifies the name of the target ARM architecture. GCC uses this -+name to determine what kind of instructions it can emit when generating -+assembly code. This option can be used in conjunction with or instead -+of the @option{-mcpu=} option. Permissible names are: @samp{armv2}, -+@samp{armv2a}, @samp{armv3}, @samp{armv3m}, @samp{armv4}, @samp{armv4t}, -+@samp{armv5}, @samp{armv5t}, @samp{armv5e}, @samp{armv5te}, -+@samp{armv6}, @samp{armv6j}, -+@samp{armv6t2}, @samp{armv6z}, @samp{armv6zk}, @samp{armv6-m}, -+@samp{armv7}, @samp{armv7-a}, @samp{armv7-r}, @samp{armv7-m}, -+@samp{iwmmxt}, @samp{iwmmxt2}, @samp{ep9312}. -+ -+@item -mfpu=@var{name} -+@itemx -mfpe=@var{number} -+@itemx -mfp=@var{number} -+@opindex mfpu -+@opindex mfpe -+@opindex mfp -+This specifies what floating point hardware (or hardware emulation) is -+available on the target. Permissible names are: @samp{fpa}, @samp{fpe2}, -+@samp{fpe3}, @samp{maverick}, @samp{vfp}, @samp{vfpv3}, @samp{vfpv3-d16} and -+@samp{neon}. @option{-mfp} and @option{-mfpe} -+are synonyms for @option{-mfpu}=@samp{fpe}@var{number}, for compatibility -+with older versions of GCC@. -+ -+If @option{-msoft-float} is specified this specifies the format of -+floating point values. -+ -+@item -mstructure-size-boundary=@var{n} -+@opindex mstructure-size-boundary -+The size of all structures and unions will be rounded up to a multiple -+of the number of bits set by this option. Permissible values are 8, 32 -+and 64. The default value varies for different toolchains. For the COFF -+targeted toolchain the default value is 8. A value of 64 is only allowed -+if the underlying ABI supports it. -+ -+Specifying the larger number can produce faster, more efficient code, but -+can also increase the size of the program. Different values are potentially -+incompatible. Code compiled with one value cannot necessarily expect to -+work with code or libraries compiled with another value, if they exchange -+information using structures or unions. -+ -+@item -mabort-on-noreturn -+@opindex mabort-on-noreturn -+Generate a call to the function @code{abort} at the end of a -+@code{noreturn} function. It will be executed if the function tries to -+return. -+ -+@item -mlong-calls -+@itemx -mno-long-calls -+@opindex mlong-calls -+@opindex mno-long-calls -+Tells the compiler to perform function calls by first loading the -+address of the function into a register and then performing a subroutine -+call on this register. This switch is needed if the target function -+will lie outside of the 64 megabyte addressing range of the offset based -+version of subroutine call instruction. -+ -+Even if this switch is enabled, not all function calls will be turned -+into long calls. The heuristic is that static functions, functions -+which have the @samp{short-call} attribute, functions that are inside -+the scope of a @samp{#pragma no_long_calls} directive and functions whose -+definitions have already been compiled within the current compilation -+unit, will not be turned into long calls. The exception to this rule is -+that weak function definitions, functions with the @samp{long-call} -+attribute or the @samp{section} attribute, and functions that are within -+the scope of a @samp{#pragma long_calls} directive, will always be -+turned into long calls. -+ -+This feature is not enabled by default. Specifying -+@option{-mno-long-calls} will restore the default behavior, as will -+placing the function calls within the scope of a @samp{#pragma -+long_calls_off} directive. Note these switches have no effect on how -+the compiler generates code to handle function calls via function -+pointers. -+ -+@item -msingle-pic-base -+@opindex msingle-pic-base -+Treat the register used for PIC addressing as read-only, rather than -+loading it in the prologue for each function. The run-time system is -+responsible for initializing this register with an appropriate value -+before execution begins. -+ -+@item -mpic-register=@var{reg} -+@opindex mpic-register -+Specify the register to be used for PIC addressing. The default is R10 -+unless stack-checking is enabled, when R9 is used. -+ -+@item -mcirrus-fix-invalid-insns -+@opindex mcirrus-fix-invalid-insns -+@opindex mno-cirrus-fix-invalid-insns -+Insert NOPs into the instruction stream to in order to work around -+problems with invalid Maverick instruction combinations. This option -+is only valid if the @option{-mcpu=ep9312} option has been used to -+enable generation of instructions for the Cirrus Maverick floating -+point co-processor. This option is not enabled by default, since the -+problem is only present in older Maverick implementations. The default -+can be re-enabled by use of the @option{-mno-cirrus-fix-invalid-insns} -+switch. -+ -+@item -mpoke-function-name -+@opindex mpoke-function-name -+Write the name of each function into the text section, directly -+preceding the function prologue. The generated code is similar to this: -+ -+@smallexample -+ t0 -+ .ascii "arm_poke_function_name", 0 -+ .align -+ t1 -+ .word 0xff000000 + (t1 - t0) -+ arm_poke_function_name -+ mov ip, sp -+ stmfd sp!, @{fp, ip, lr, pc@} -+ sub fp, ip, #4 -+@end smallexample -+ -+When performing a stack backtrace, code can inspect the value of -+@code{pc} stored at @code{fp + 0}. If the trace function then looks at -+location @code{pc - 12} and the top 8 bits are set, then we know that -+there is a function name embedded immediately preceding this location -+and has length @code{((pc[-3]) & 0xff000000)}. -+ -+@item -mthumb -+@opindex mthumb -+Generate code for the Thumb instruction set. The default is to -+use the 32-bit ARM instruction set. -+This option automatically enables either 16-bit Thumb-1 or -+mixed 16/32-bit Thumb-2 instructions based on the @option{-mcpu=@var{name}} -+and @option{-march=@var{name}} options. -+ -+@item -mtpcs-frame -+@opindex mtpcs-frame -+Generate a stack frame that is compliant with the Thumb Procedure Call -+Standard for all non-leaf functions. (A leaf function is one that does -+not call any other functions.) The default is @option{-mno-tpcs-frame}. -+ -+@item -mtpcs-leaf-frame -+@opindex mtpcs-leaf-frame -+Generate a stack frame that is compliant with the Thumb Procedure Call -+Standard for all leaf functions. (A leaf function is one that does -+not call any other functions.) The default is @option{-mno-apcs-leaf-frame}. -+ -+@item -mcallee-super-interworking -+@opindex mcallee-super-interworking -+Gives all externally visible functions in the file being compiled an ARM -+instruction set header which switches to Thumb mode before executing the -+rest of the function. This allows these functions to be called from -+non-interworking code. -+ -+@item -mcaller-super-interworking -+@opindex mcaller-super-interworking -+Allows calls via function pointers (including virtual functions) to -+execute correctly regardless of whether the target code has been -+compiled for interworking or not. There is a small overhead in the cost -+of executing a function pointer if this option is enabled. -+ -+@item -mtp=@var{name} -+@opindex mtp -+Specify the access model for the thread local storage pointer. The valid -+models are @option{soft}, which generates calls to @code{__aeabi_read_tp}, -+@option{cp15}, which fetches the thread pointer from @code{cp15} directly -+(supported in the arm6k architecture), and @option{auto}, which uses the -+best available method for the selected processor. The default setting is -+@option{auto}. -+ -+@item -mword-relocations -+@opindex mword-relocations -+Only generate absolute relocations on word sized values (i.e. R_ARM_ABS32). -+This is enabled by default on targets (uClinux, SymbianOS) where the runtime -+loader imposes this restriction, and when @option{-fpic} or @option{-fPIC} -+is specified. -+ -+@end table -+ -+@node AVR Options -+@subsection AVR Options -+@cindex AVR Options -+ -+These options are defined for AVR implementations: -+ -+@table @gcctabopt -+@item -mmcu=@var{mcu} -+@opindex mmcu -+Specify ATMEL AVR instruction set or MCU type. -+ -+Instruction set avr1 is for the minimal AVR core, not supported by the C -+compiler, only for assembler programs (MCU types: at90s1200, attiny10, -+attiny11, attiny12, attiny15, attiny28). -+ -+Instruction set avr2 (default) is for the classic AVR core with up to -+8K program memory space (MCU types: at90s2313, at90s2323, attiny22, -+at90s2333, at90s2343, at90s4414, at90s4433, at90s4434, at90s8515, -+at90c8534, at90s8535). -+ -+Instruction set avr3 is for the classic AVR core with up to 128K program -+memory space (MCU types: atmega103, atmega603, at43usb320, at76c711). -+ -+Instruction set avr4 is for the enhanced AVR core with up to 8K program -+memory space (MCU types: atmega8, atmega83, atmega85). -+ -+Instruction set avr5 is for the enhanced AVR core with up to 128K program -+memory space (MCU types: atmega16, atmega161, atmega163, atmega32, atmega323, -+atmega64, atmega128, at43usb355, at94k). -+ -+@item -msize -+@opindex msize -+Output instruction sizes to the asm file. -+ -+@item -mno-interrupts -+@opindex mno-interrupts -+Generated code is not compatible with hardware interrupts. -+Code size will be smaller. -+ -+@item -mcall-prologues -+@opindex mcall-prologues -+Functions prologues/epilogues expanded as call to appropriate -+subroutines. Code size will be smaller. -+ -+@item -mno-tablejump -+@opindex mno-tablejump -+Do not generate tablejump insns which sometimes increase code size. -+The option is now deprecated in favor of the equivalent -+@option{-fno-jump-tables} -+ -+@item -mtiny-stack -+@opindex mtiny-stack -+Change only the low 8 bits of the stack pointer. -+ -+@item -mint8 -+@opindex mint8 -+Assume int to be 8 bit integer. This affects the sizes of all types: A -+char will be 1 byte, an int will be 1 byte, an long will be 2 bytes -+and long long will be 4 bytes. Please note that this option does not -+comply to the C standards, but it will provide you with smaller code -+size. -+@end table -+ -+@node Blackfin Options -+@subsection Blackfin Options -+@cindex Blackfin Options -+ -+@table @gcctabopt -+@item -mcpu=@var{cpu}@r{[}-@var{sirevision}@r{]} -+@opindex mcpu= -+Specifies the name of the target Blackfin processor. Currently, @var{cpu} -+can be one of @samp{bf512}, @samp{bf514}, @samp{bf516}, @samp{bf518}, -+@samp{bf522}, @samp{bf523}, @samp{bf524}, @samp{bf525}, @samp{bf526}, -+@samp{bf527}, @samp{bf531}, @samp{bf532}, @samp{bf533}, -+@samp{bf534}, @samp{bf536}, @samp{bf537}, @samp{bf538}, @samp{bf539}, -+@samp{bf542}, @samp{bf544}, @samp{bf547}, @samp{bf548}, @samp{bf549}, -+@samp{bf561}. -+The optional @var{sirevision} specifies the silicon revision of the target -+Blackfin processor. Any workarounds available for the targeted silicon revision -+will be enabled. If @var{sirevision} is @samp{none}, no workarounds are enabled. -+If @var{sirevision} is @samp{any}, all workarounds for the targeted processor -+will be enabled. The @code{__SILICON_REVISION__} macro is defined to two -+hexadecimal digits representing the major and minor numbers in the silicon -+revision. If @var{sirevision} is @samp{none}, the @code{__SILICON_REVISION__} -+is not defined. If @var{sirevision} is @samp{any}, the -+@code{__SILICON_REVISION__} is defined to be @code{0xffff}. -+If this optional @var{sirevision} is not used, GCC assumes the latest known -+silicon revision of the targeted Blackfin processor. -+ -+Support for @samp{bf561} is incomplete. For @samp{bf561}, -+Only the processor macro is defined. -+Without this option, @samp{bf532} is used as the processor by default. -+The corresponding predefined processor macros for @var{cpu} is to -+be defined. And for @samp{bfin-elf} toolchain, this causes the hardware BSP -+provided by libgloss to be linked in if @option{-msim} is not given. -+ -+@item -msim -+@opindex msim -+Specifies that the program will be run on the simulator. This causes -+the simulator BSP provided by libgloss to be linked in. This option -+has effect only for @samp{bfin-elf} toolchain. -+Certain other options, such as @option{-mid-shared-library} and -+@option{-mfdpic}, imply @option{-msim}. -+ -+@item -momit-leaf-frame-pointer -+@opindex momit-leaf-frame-pointer -+Don't keep the frame pointer in a register for leaf functions. This -+avoids the instructions to save, set up and restore frame pointers and -+makes an extra register available in leaf functions. The option -+@option{-fomit-frame-pointer} removes the frame pointer for all functions -+which might make debugging harder. -+ -+@item -mspecld-anomaly -+@opindex mspecld-anomaly -+When enabled, the compiler will ensure that the generated code does not -+contain speculative loads after jump instructions. If this option is used, -+@code{__WORKAROUND_SPECULATIVE_LOADS} is defined. -+ -+@item -mno-specld-anomaly -+@opindex mno-specld-anomaly -+Don't generate extra code to prevent speculative loads from occurring. -+ -+@item -mcsync-anomaly -+@opindex mcsync-anomaly -+When enabled, the compiler will ensure that the generated code does not -+contain CSYNC or SSYNC instructions too soon after conditional branches. -+If this option is used, @code{__WORKAROUND_SPECULATIVE_SYNCS} is defined. -+ -+@item -mno-csync-anomaly -+@opindex mno-csync-anomaly -+Don't generate extra code to prevent CSYNC or SSYNC instructions from -+occurring too soon after a conditional branch. -+ -+@item -mlow-64k -+@opindex mlow-64k -+When enabled, the compiler is free to take advantage of the knowledge that -+the entire program fits into the low 64k of memory. -+ -+@item -mno-low-64k -+@opindex mno-low-64k -+Assume that the program is arbitrarily large. This is the default. -+ -+@item -mstack-check-l1 -+@opindex mstack-check-l1 -+Do stack checking using information placed into L1 scratchpad memory by the -+uClinux kernel. -+ -+@item -mid-shared-library -+@opindex mid-shared-library -+Generate code that supports shared libraries via the library ID method. -+This allows for execute in place and shared libraries in an environment -+without virtual memory management. This option implies @option{-fPIC}. -+With a @samp{bfin-elf} target, this option implies @option{-msim}. -+ -+@item -mno-id-shared-library -+@opindex mno-id-shared-library -+Generate code that doesn't assume ID based shared libraries are being used. -+This is the default. -+ -+@item -mleaf-id-shared-library -+@opindex mleaf-id-shared-library -+Generate code that supports shared libraries via the library ID method, -+but assumes that this library or executable won't link against any other -+ID shared libraries. That allows the compiler to use faster code for jumps -+and calls. -+ -+@item -mno-leaf-id-shared-library -+@opindex mno-leaf-id-shared-library -+Do not assume that the code being compiled won't link against any ID shared -+libraries. Slower code will be generated for jump and call insns. -+ -+@item -mshared-library-id=n -+@opindex mshared-library-id -+Specified the identification number of the ID based shared library being -+compiled. Specifying a value of 0 will generate more compact code, specifying -+other values will force the allocation of that number to the current -+library but is no more space or time efficient than omitting this option. -+ -+@item -msep-data -+@opindex msep-data -+Generate code that allows the data segment to be located in a different -+area of memory from the text segment. This allows for execute in place in -+an environment without virtual memory management by eliminating relocations -+against the text section. -+ -+@item -mno-sep-data -+@opindex mno-sep-data -+Generate code that assumes that the data segment follows the text segment. -+This is the default. -+ -+@item -mlong-calls -+@itemx -mno-long-calls -+@opindex mlong-calls -+@opindex mno-long-calls -+Tells the compiler to perform function calls by first loading the -+address of the function into a register and then performing a subroutine -+call on this register. This switch is needed if the target function -+will lie outside of the 24 bit addressing range of the offset based -+version of subroutine call instruction. -+ -+This feature is not enabled by default. Specifying -+@option{-mno-long-calls} will restore the default behavior. Note these -+switches have no effect on how the compiler generates code to handle -+function calls via function pointers. -+ -+@item -mfast-fp -+@opindex mfast-fp -+Link with the fast floating-point library. This library relaxes some of -+the IEEE floating-point standard's rules for checking inputs against -+Not-a-Number (NAN), in the interest of performance. -+ -+@item -minline-plt -+@opindex minline-plt -+Enable inlining of PLT entries in function calls to functions that are -+not known to bind locally. It has no effect without @option{-mfdpic}. -+ -+@item -mmulticore -+@opindex mmulticore -+Build standalone application for multicore Blackfin processor. Proper -+start files and link scripts will be used to support multicore. -+This option defines @code{__BFIN_MULTICORE}. It can only be used with -+@option{-mcpu=bf561@r{[}-@var{sirevision}@r{]}}. It can be used with -+@option{-mcorea} or @option{-mcoreb}. If it's used without -+@option{-mcorea} or @option{-mcoreb}, single application/dual core -+programming model is used. In this model, the main function of Core B -+should be named as coreb_main. If it's used with @option{-mcorea} or -+@option{-mcoreb}, one application per core programming model is used. -+If this option is not used, single core application programming -+model is used. -+ -+@item -mcorea -+@opindex mcorea -+Build standalone application for Core A of BF561 when using -+one application per core programming model. Proper start files -+and link scripts will be used to support Core A. This option -+defines @code{__BFIN_COREA}. It must be used with @option{-mmulticore}. -+ -+@item -mcoreb -+@opindex mcoreb -+Build standalone application for Core B of BF561 when using -+one application per core programming model. Proper start files -+and link scripts will be used to support Core B. This option -+defines @code{__BFIN_COREB}. When this option is used, coreb_main -+should be used instead of main. It must be used with -+@option{-mmulticore}. -+ -+@item -msdram -+@opindex msdram -+Build standalone application for SDRAM. Proper start files and -+link scripts will be used to put the application into SDRAM. -+Loader should initialize SDRAM before loading the application -+into SDRAM. This option defines @code{__BFIN_SDRAM}. -+ -+@item -micplb -+@opindex micplb -+Assume that ICPLBs are enabled at runtime. This has an effect on certain -+anomaly workarounds. For Linux targets, the default is to assume ICPLBs -+are enabled; for standalone applications the default is off. -+@end table -+ -+@node CRIS Options -+@subsection CRIS Options -+@cindex CRIS Options -+ -+These options are defined specifically for the CRIS ports. -+ -+@table @gcctabopt -+@item -march=@var{architecture-type} -+@itemx -mcpu=@var{architecture-type} -+@opindex march -+@opindex mcpu -+Generate code for the specified architecture. The choices for -+@var{architecture-type} are @samp{v3}, @samp{v8} and @samp{v10} for -+respectively ETRAX@w{ }4, ETRAX@w{ }100, and ETRAX@w{ }100@w{ }LX@. -+Default is @samp{v0} except for cris-axis-linux-gnu, where the default is -+@samp{v10}. -+ -+@item -mtune=@var{architecture-type} -+@opindex mtune -+Tune to @var{architecture-type} everything applicable about the generated -+code, except for the ABI and the set of available instructions. The -+choices for @var{architecture-type} are the same as for -+@option{-march=@var{architecture-type}}. -+ -+@item -mmax-stack-frame=@var{n} -+@opindex mmax-stack-frame -+Warn when the stack frame of a function exceeds @var{n} bytes. -+ -+@item -metrax4 -+@itemx -metrax100 -+@opindex metrax4 -+@opindex metrax100 -+The options @option{-metrax4} and @option{-metrax100} are synonyms for -+@option{-march=v3} and @option{-march=v8} respectively. -+ -+@item -mmul-bug-workaround -+@itemx -mno-mul-bug-workaround -+@opindex mmul-bug-workaround -+@opindex mno-mul-bug-workaround -+Work around a bug in the @code{muls} and @code{mulu} instructions for CPU -+models where it applies. This option is active by default. -+ -+@item -mpdebug -+@opindex mpdebug -+Enable CRIS-specific verbose debug-related information in the assembly -+code. This option also has the effect to turn off the @samp{#NO_APP} -+formatted-code indicator to the assembler at the beginning of the -+assembly file. -+ -+@item -mcc-init -+@opindex mcc-init -+Do not use condition-code results from previous instruction; always emit -+compare and test instructions before use of condition codes. -+ -+@item -mno-side-effects -+@opindex mno-side-effects -+Do not emit instructions with side-effects in addressing modes other than -+post-increment. -+ -+@item -mstack-align -+@itemx -mno-stack-align -+@itemx -mdata-align -+@itemx -mno-data-align -+@itemx -mconst-align -+@itemx -mno-const-align -+@opindex mstack-align -+@opindex mno-stack-align -+@opindex mdata-align -+@opindex mno-data-align -+@opindex mconst-align -+@opindex mno-const-align -+These options (no-options) arranges (eliminate arrangements) for the -+stack-frame, individual data and constants to be aligned for the maximum -+single data access size for the chosen CPU model. The default is to -+arrange for 32-bit alignment. ABI details such as structure layout are -+not affected by these options. -+ -+@item -m32-bit -+@itemx -m16-bit -+@itemx -m8-bit -+@opindex m32-bit -+@opindex m16-bit -+@opindex m8-bit -+Similar to the stack- data- and const-align options above, these options -+arrange for stack-frame, writable data and constants to all be 32-bit, -+16-bit or 8-bit aligned. The default is 32-bit alignment. -+ -+@item -mno-prologue-epilogue -+@itemx -mprologue-epilogue -+@opindex mno-prologue-epilogue -+@opindex mprologue-epilogue -+With @option{-mno-prologue-epilogue}, the normal function prologue and -+epilogue that sets up the stack-frame are omitted and no return -+instructions or return sequences are generated in the code. Use this -+option only together with visual inspection of the compiled code: no -+warnings or errors are generated when call-saved registers must be saved, -+or storage for local variable needs to be allocated. -+ -+@item -mno-gotplt -+@itemx -mgotplt -+@opindex mno-gotplt -+@opindex mgotplt -+With @option{-fpic} and @option{-fPIC}, don't generate (do generate) -+instruction sequences that load addresses for functions from the PLT part -+of the GOT rather than (traditional on other architectures) calls to the -+PLT@. The default is @option{-mgotplt}. -+ -+@item -melf -+@opindex melf -+Legacy no-op option only recognized with the cris-axis-elf and -+cris-axis-linux-gnu targets. -+ -+@item -mlinux -+@opindex mlinux -+Legacy no-op option only recognized with the cris-axis-linux-gnu target. -+ -+@item -sim -+@opindex sim -+This option, recognized for the cris-axis-elf arranges -+to link with input-output functions from a simulator library. Code, -+initialized data and zero-initialized data are allocated consecutively. -+ -+@item -sim2 -+@opindex sim2 -+Like @option{-sim}, but pass linker options to locate initialized data at -+0x40000000 and zero-initialized data at 0x80000000. -+@end table -+ -+@node CRX Options -+@subsection CRX Options -+@cindex CRX Options -+ -+These options are defined specifically for the CRX ports. -+ -+@table @gcctabopt -+ -+@item -mmac -+@opindex mmac -+Enable the use of multiply-accumulate instructions. Disabled by default. -+ -+@item -mpush-args -+@opindex mpush-args -+Push instructions will be used to pass outgoing arguments when functions -+are called. Enabled by default. -+@end table -+ -+@node Darwin Options -+@subsection Darwin Options -+@cindex Darwin options -+ -+These options are defined for all architectures running the Darwin operating -+system. -+ -+FSF GCC on Darwin does not create ``fat'' object files; it will create -+an object file for the single architecture that it was built to -+target. Apple's GCC on Darwin does create ``fat'' files if multiple -+@option{-arch} options are used; it does so by running the compiler or -+linker multiple times and joining the results together with -+@file{lipo}. -+ -+The subtype of the file created (like @samp{ppc7400} or @samp{ppc970} or -+@samp{i686}) is determined by the flags that specify the ISA -+that GCC is targetting, like @option{-mcpu} or @option{-march}. The -+@option{-force_cpusubtype_ALL} option can be used to override this. -+ -+The Darwin tools vary in their behavior when presented with an ISA -+mismatch. The assembler, @file{as}, will only permit instructions to -+be used that are valid for the subtype of the file it is generating, -+so you cannot put 64-bit instructions in an @samp{ppc750} object file. -+The linker for shared libraries, @file{/usr/bin/libtool}, will fail -+and print an error if asked to create a shared library with a less -+restrictive subtype than its input files (for instance, trying to put -+a @samp{ppc970} object file in a @samp{ppc7400} library). The linker -+for executables, @file{ld}, will quietly give the executable the most -+restrictive subtype of any of its input files. -+ -+@table @gcctabopt -+@item -F@var{dir} -+@opindex F -+Add the framework directory @var{dir} to the head of the list of -+directories to be searched for header files. These directories are -+interleaved with those specified by @option{-I} options and are -+scanned in a left-to-right order. -+ -+A framework directory is a directory with frameworks in it. A -+framework is a directory with a @samp{"Headers"} and/or -+@samp{"PrivateHeaders"} directory contained directly in it that ends -+in @samp{".framework"}. The name of a framework is the name of this -+directory excluding the @samp{".framework"}. Headers associated with -+the framework are found in one of those two directories, with -+@samp{"Headers"} being searched first. A subframework is a framework -+directory that is in a framework's @samp{"Frameworks"} directory. -+Includes of subframework headers can only appear in a header of a -+framework that contains the subframework, or in a sibling subframework -+header. Two subframeworks are siblings if they occur in the same -+framework. A subframework should not have the same name as a -+framework, a warning will be issued if this is violated. Currently a -+subframework cannot have subframeworks, in the future, the mechanism -+may be extended to support this. The standard frameworks can be found -+in @samp{"/System/Library/Frameworks"} and -+@samp{"/Library/Frameworks"}. An example include looks like -+@code{#include <Framework/header.h>}, where @samp{Framework} denotes -+the name of the framework and header.h is found in the -+@samp{"PrivateHeaders"} or @samp{"Headers"} directory. -+ -+@item -iframework@var{dir} -+@opindex iframework -+Like @option{-F} except the directory is a treated as a system -+directory. The main difference between this @option{-iframework} and -+@option{-F} is that with @option{-iframework} the compiler does not -+warn about constructs contained within header files found via -+@var{dir}. This option is valid only for the C family of languages. -+ -+@item -gused -+@opindex gused -+Emit debugging information for symbols that are used. For STABS -+debugging format, this enables @option{-feliminate-unused-debug-symbols}. -+This is by default ON@. -+ -+@item -gfull -+@opindex gfull -+Emit debugging information for all symbols and types. -+ -+@item -mmacosx-version-min=@var{version} -+The earliest version of MacOS X that this executable will run on -+is @var{version}. Typical values of @var{version} include @code{10.1}, -+@code{10.2}, and @code{10.3.9}. -+ -+If the compiler was built to use the system's headers by default, -+then the default for this option is the system version on which the -+compiler is running, otherwise the default is to make choices which -+are compatible with as many systems and code bases as possible. -+ -+@item -mkernel -+@opindex mkernel -+Enable kernel development mode. The @option{-mkernel} option sets -+@option{-static}, @option{-fno-common}, @option{-fno-cxa-atexit}, -+@option{-fno-exceptions}, @option{-fno-non-call-exceptions}, -+@option{-fapple-kext}, @option{-fno-weak} and @option{-fno-rtti} where -+applicable. This mode also sets @option{-mno-altivec}, -+@option{-msoft-float}, @option{-fno-builtin} and -+@option{-mlong-branch} for PowerPC targets. -+ -+@item -mone-byte-bool -+@opindex mone-byte-bool -+Override the defaults for @samp{bool} so that @samp{sizeof(bool)==1}. -+By default @samp{sizeof(bool)} is @samp{4} when compiling for -+Darwin/PowerPC and @samp{1} when compiling for Darwin/x86, so this -+option has no effect on x86. -+ -+@strong{Warning:} The @option{-mone-byte-bool} switch causes GCC -+to generate code that is not binary compatible with code generated -+without that switch. Using this switch may require recompiling all -+other modules in a program, including system libraries. Use this -+switch to conform to a non-default data model. -+ -+@item -mfix-and-continue -+@itemx -ffix-and-continue -+@itemx -findirect-data -+@opindex mfix-and-continue -+@opindex ffix-and-continue -+@opindex findirect-data -+Generate code suitable for fast turn around development. Needed to -+enable gdb to dynamically load @code{.o} files into already running -+programs. @option{-findirect-data} and @option{-ffix-and-continue} -+are provided for backwards compatibility. -+ -+@item -all_load -+@opindex all_load -+Loads all members of static archive libraries. -+See man ld(1) for more information. -+ -+@item -arch_errors_fatal -+@opindex arch_errors_fatal -+Cause the errors having to do with files that have the wrong architecture -+to be fatal. -+ -+@item -bind_at_load -+@opindex bind_at_load -+Causes the output file to be marked such that the dynamic linker will -+bind all undefined references when the file is loaded or launched. -+ -+@item -bundle -+@opindex bundle -+Produce a Mach-o bundle format file. -+See man ld(1) for more information. -+ -+@item -bundle_loader @var{executable} -+@opindex bundle_loader -+This option specifies the @var{executable} that will be loading the build -+output file being linked. See man ld(1) for more information. -+ -+@item -dynamiclib -+@opindex dynamiclib -+When passed this option, GCC will produce a dynamic library instead of -+an executable when linking, using the Darwin @file{libtool} command. -+ -+@item -force_cpusubtype_ALL -+@opindex force_cpusubtype_ALL -+This causes GCC's output file to have the @var{ALL} subtype, instead of -+one controlled by the @option{-mcpu} or @option{-march} option. -+ -+@item -allowable_client @var{client_name} -+@itemx -client_name -+@itemx -compatibility_version -+@itemx -current_version -+@itemx -dead_strip -+@itemx -dependency-file -+@itemx -dylib_file -+@itemx -dylinker_install_name -+@itemx -dynamic -+@itemx -exported_symbols_list -+@itemx -filelist -+@itemx -flat_namespace -+@itemx -force_flat_namespace -+@itemx -headerpad_max_install_names -+@itemx -image_base -+@itemx -init -+@itemx -install_name -+@itemx -keep_private_externs -+@itemx -multi_module -+@itemx -multiply_defined -+@itemx -multiply_defined_unused -+@itemx -noall_load -+@itemx -no_dead_strip_inits_and_terms -+@itemx -nofixprebinding -+@itemx -nomultidefs -+@itemx -noprebind -+@itemx -noseglinkedit -+@itemx -pagezero_size -+@itemx -prebind -+@itemx -prebind_all_twolevel_modules -+@itemx -private_bundle -+@itemx -read_only_relocs -+@itemx -sectalign -+@itemx -sectobjectsymbols -+@itemx -whyload -+@itemx -seg1addr -+@itemx -sectcreate -+@itemx -sectobjectsymbols -+@itemx -sectorder -+@itemx -segaddr -+@itemx -segs_read_only_addr -+@itemx -segs_read_write_addr -+@itemx -seg_addr_table -+@itemx -seg_addr_table_filename -+@itemx -seglinkedit -+@itemx -segprot -+@itemx -segs_read_only_addr -+@itemx -segs_read_write_addr -+@itemx -single_module -+@itemx -static -+@itemx -sub_library -+@itemx -sub_umbrella -+@itemx -twolevel_namespace -+@itemx -umbrella -+@itemx -undefined -+@itemx -unexported_symbols_list -+@itemx -weak_reference_mismatches -+@itemx -whatsloaded -+@opindex allowable_client -+@opindex client_name -+@opindex compatibility_version -+@opindex current_version -+@opindex dead_strip -+@opindex dependency-file -+@opindex dylib_file -+@opindex dylinker_install_name -+@opindex dynamic -+@opindex exported_symbols_list -+@opindex filelist -+@opindex flat_namespace -+@opindex force_flat_namespace -+@opindex headerpad_max_install_names -+@opindex image_base -+@opindex init -+@opindex install_name -+@opindex keep_private_externs -+@opindex multi_module -+@opindex multiply_defined -+@opindex multiply_defined_unused -+@opindex noall_load -+@opindex no_dead_strip_inits_and_terms -+@opindex nofixprebinding -+@opindex nomultidefs -+@opindex noprebind -+@opindex noseglinkedit -+@opindex pagezero_size -+@opindex prebind -+@opindex prebind_all_twolevel_modules -+@opindex private_bundle -+@opindex read_only_relocs -+@opindex sectalign -+@opindex sectobjectsymbols -+@opindex whyload -+@opindex seg1addr -+@opindex sectcreate -+@opindex sectobjectsymbols -+@opindex sectorder -+@opindex segaddr -+@opindex segs_read_only_addr -+@opindex segs_read_write_addr -+@opindex seg_addr_table -+@opindex seg_addr_table_filename -+@opindex seglinkedit -+@opindex segprot -+@opindex segs_read_only_addr -+@opindex segs_read_write_addr -+@opindex single_module -+@opindex static -+@opindex sub_library -+@opindex sub_umbrella -+@opindex twolevel_namespace -+@opindex umbrella -+@opindex undefined -+@opindex unexported_symbols_list -+@opindex weak_reference_mismatches -+@opindex whatsloaded -+These options are passed to the Darwin linker. The Darwin linker man page -+describes them in detail. -+@end table -+ -+@node DEC Alpha Options -+@subsection DEC Alpha Options -+ -+These @samp{-m} options are defined for the DEC Alpha implementations: -+ -+@table @gcctabopt -+@item -mno-soft-float -+@itemx -msoft-float -+@opindex mno-soft-float -+@opindex msoft-float -+Use (do not use) the hardware floating-point instructions for -+floating-point operations. When @option{-msoft-float} is specified, -+functions in @file{libgcc.a} will be used to perform floating-point -+operations. Unless they are replaced by routines that emulate the -+floating-point operations, or compiled in such a way as to call such -+emulations routines, these routines will issue floating-point -+operations. If you are compiling for an Alpha without floating-point -+operations, you must ensure that the library is built so as not to call -+them. -+ -+Note that Alpha implementations without floating-point operations are -+required to have floating-point registers. -+ -+@item -mfp-reg -+@itemx -mno-fp-regs -+@opindex mfp-reg -+@opindex mno-fp-regs -+Generate code that uses (does not use) the floating-point register set. -+@option{-mno-fp-regs} implies @option{-msoft-float}. If the floating-point -+register set is not used, floating point operands are passed in integer -+registers as if they were integers and floating-point results are passed -+in @code{$0} instead of @code{$f0}. This is a non-standard calling sequence, -+so any function with a floating-point argument or return value called by code -+compiled with @option{-mno-fp-regs} must also be compiled with that -+option. -+ -+A typical use of this option is building a kernel that does not use, -+and hence need not save and restore, any floating-point registers. -+ -+@item -mieee -+@opindex mieee -+The Alpha architecture implements floating-point hardware optimized for -+maximum performance. It is mostly compliant with the IEEE floating -+point standard. However, for full compliance, software assistance is -+required. This option generates code fully IEEE compliant code -+@emph{except} that the @var{inexact-flag} is not maintained (see below). -+If this option is turned on, the preprocessor macro @code{_IEEE_FP} is -+defined during compilation. The resulting code is less efficient but is -+able to correctly support denormalized numbers and exceptional IEEE -+values such as not-a-number and plus/minus infinity. Other Alpha -+compilers call this option @option{-ieee_with_no_inexact}. -+ -+@item -mieee-with-inexact -+@opindex mieee-with-inexact -+This is like @option{-mieee} except the generated code also maintains -+the IEEE @var{inexact-flag}. Turning on this option causes the -+generated code to implement fully-compliant IEEE math. In addition to -+@code{_IEEE_FP}, @code{_IEEE_FP_EXACT} is defined as a preprocessor -+macro. On some Alpha implementations the resulting code may execute -+significantly slower than the code generated by default. Since there is -+very little code that depends on the @var{inexact-flag}, you should -+normally not specify this option. Other Alpha compilers call this -+option @option{-ieee_with_inexact}. -+ -+@item -mfp-trap-mode=@var{trap-mode} -+@opindex mfp-trap-mode -+This option controls what floating-point related traps are enabled. -+Other Alpha compilers call this option @option{-fptm @var{trap-mode}}. -+The trap mode can be set to one of four values: -+ -+@table @samp -+@item n -+This is the default (normal) setting. The only traps that are enabled -+are the ones that cannot be disabled in software (e.g., division by zero -+trap). -+ -+@item u -+In addition to the traps enabled by @samp{n}, underflow traps are enabled -+as well. -+ -+@item su -+Like @samp{u}, but the instructions are marked to be safe for software -+completion (see Alpha architecture manual for details). -+ -+@item sui -+Like @samp{su}, but inexact traps are enabled as well. -+@end table -+ -+@item -mfp-rounding-mode=@var{rounding-mode} -+@opindex mfp-rounding-mode -+Selects the IEEE rounding mode. Other Alpha compilers call this option -+@option{-fprm @var{rounding-mode}}. The @var{rounding-mode} can be one -+of: -+ -+@table @samp -+@item n -+Normal IEEE rounding mode. Floating point numbers are rounded towards -+the nearest machine number or towards the even machine number in case -+of a tie. -+ -+@item m -+Round towards minus infinity. -+ -+@item c -+Chopped rounding mode. Floating point numbers are rounded towards zero. -+ -+@item d -+Dynamic rounding mode. A field in the floating point control register -+(@var{fpcr}, see Alpha architecture reference manual) controls the -+rounding mode in effect. The C library initializes this register for -+rounding towards plus infinity. Thus, unless your program modifies the -+@var{fpcr}, @samp{d} corresponds to round towards plus infinity. -+@end table -+ -+@item -mtrap-precision=@var{trap-precision} -+@opindex mtrap-precision -+In the Alpha architecture, floating point traps are imprecise. This -+means without software assistance it is impossible to recover from a -+floating trap and program execution normally needs to be terminated. -+GCC can generate code that can assist operating system trap handlers -+in determining the exact location that caused a floating point trap. -+Depending on the requirements of an application, different levels of -+precisions can be selected: -+ -+@table @samp -+@item p -+Program precision. This option is the default and means a trap handler -+can only identify which program caused a floating point exception. -+ -+@item f -+Function precision. The trap handler can determine the function that -+caused a floating point exception. -+ -+@item i -+Instruction precision. The trap handler can determine the exact -+instruction that caused a floating point exception. -+@end table -+ -+Other Alpha compilers provide the equivalent options called -+@option{-scope_safe} and @option{-resumption_safe}. -+ -+@item -mieee-conformant -+@opindex mieee-conformant -+This option marks the generated code as IEEE conformant. You must not -+use this option unless you also specify @option{-mtrap-precision=i} and either -+@option{-mfp-trap-mode=su} or @option{-mfp-trap-mode=sui}. Its only effect -+is to emit the line @samp{.eflag 48} in the function prologue of the -+generated assembly file. Under DEC Unix, this has the effect that -+IEEE-conformant math library routines will be linked in. -+ -+@item -mbuild-constants -+@opindex mbuild-constants -+Normally GCC examines a 32- or 64-bit integer constant to -+see if it can construct it from smaller constants in two or three -+instructions. If it cannot, it will output the constant as a literal and -+generate code to load it from the data segment at runtime. -+ -+Use this option to require GCC to construct @emph{all} integer constants -+using code, even if it takes more instructions (the maximum is six). -+ -+You would typically use this option to build a shared library dynamic -+loader. Itself a shared library, it must relocate itself in memory -+before it can find the variables and constants in its own data segment. -+ -+@item -malpha-as -+@itemx -mgas -+@opindex malpha-as -+@opindex mgas -+Select whether to generate code to be assembled by the vendor-supplied -+assembler (@option{-malpha-as}) or by the GNU assembler @option{-mgas}. -+ -+@item -mbwx -+@itemx -mno-bwx -+@itemx -mcix -+@itemx -mno-cix -+@itemx -mfix -+@itemx -mno-fix -+@itemx -mmax -+@itemx -mno-max -+@opindex mbwx -+@opindex mno-bwx -+@opindex mcix -+@opindex mno-cix -+@opindex mfix -+@opindex mno-fix -+@opindex mmax -+@opindex mno-max -+Indicate whether GCC should generate code to use the optional BWX, -+CIX, FIX and MAX instruction sets. The default is to use the instruction -+sets supported by the CPU type specified via @option{-mcpu=} option or that -+of the CPU on which GCC was built if none was specified. -+ -+@item -mfloat-vax -+@itemx -mfloat-ieee -+@opindex mfloat-vax -+@opindex mfloat-ieee -+Generate code that uses (does not use) VAX F and G floating point -+arithmetic instead of IEEE single and double precision. -+ -+@item -mexplicit-relocs -+@itemx -mno-explicit-relocs -+@opindex mexplicit-relocs -+@opindex mno-explicit-relocs -+Older Alpha assemblers provided no way to generate symbol relocations -+except via assembler macros. Use of these macros does not allow -+optimal instruction scheduling. GNU binutils as of version 2.12 -+supports a new syntax that allows the compiler to explicitly mark -+which relocations should apply to which instructions. This option -+is mostly useful for debugging, as GCC detects the capabilities of -+the assembler when it is built and sets the default accordingly. -+ -+@item -msmall-data -+@itemx -mlarge-data -+@opindex msmall-data -+@opindex mlarge-data -+When @option{-mexplicit-relocs} is in effect, static data is -+accessed via @dfn{gp-relative} relocations. When @option{-msmall-data} -+is used, objects 8 bytes long or smaller are placed in a @dfn{small data area} -+(the @code{.sdata} and @code{.sbss} sections) and are accessed via -+16-bit relocations off of the @code{$gp} register. This limits the -+size of the small data area to 64KB, but allows the variables to be -+directly accessed via a single instruction. -+ -+The default is @option{-mlarge-data}. With this option the data area -+is limited to just below 2GB@. Programs that require more than 2GB of -+data must use @code{malloc} or @code{mmap} to allocate the data in the -+heap instead of in the program's data segment. -+ -+When generating code for shared libraries, @option{-fpic} implies -+@option{-msmall-data} and @option{-fPIC} implies @option{-mlarge-data}. -+ -+@item -msmall-text -+@itemx -mlarge-text -+@opindex msmall-text -+@opindex mlarge-text -+When @option{-msmall-text} is used, the compiler assumes that the -+code of the entire program (or shared library) fits in 4MB, and is -+thus reachable with a branch instruction. When @option{-msmall-data} -+is used, the compiler can assume that all local symbols share the -+same @code{$gp} value, and thus reduce the number of instructions -+required for a function call from 4 to 1. -+ -+The default is @option{-mlarge-text}. -+ -+@item -mcpu=@var{cpu_type} -+@opindex mcpu -+Set the instruction set and instruction scheduling parameters for -+machine type @var{cpu_type}. You can specify either the @samp{EV} -+style name or the corresponding chip number. GCC supports scheduling -+parameters for the EV4, EV5 and EV6 family of processors and will -+choose the default values for the instruction set from the processor -+you specify. If you do not specify a processor type, GCC will default -+to the processor on which the compiler was built. -+ -+Supported values for @var{cpu_type} are -+ -+@table @samp -+@item ev4 -+@itemx ev45 -+@itemx 21064 -+Schedules as an EV4 and has no instruction set extensions. -+ -+@item ev5 -+@itemx 21164 -+Schedules as an EV5 and has no instruction set extensions. -+ -+@item ev56 -+@itemx 21164a -+Schedules as an EV5 and supports the BWX extension. -+ -+@item pca56 -+@itemx 21164pc -+@itemx 21164PC -+Schedules as an EV5 and supports the BWX and MAX extensions. -+ -+@item ev6 -+@itemx 21264 -+Schedules as an EV6 and supports the BWX, FIX, and MAX extensions. -+ -+@item ev67 -+@itemx 21264a -+Schedules as an EV6 and supports the BWX, CIX, FIX, and MAX extensions. -+@end table -+ -+Native Linux/GNU toolchains also support the value @samp{native}, -+which selects the best architecture option for the host processor. -+@option{-mcpu=native} has no effect if GCC does not recognize -+the processor. -+ -+@item -mtune=@var{cpu_type} -+@opindex mtune -+Set only the instruction scheduling parameters for machine type -+@var{cpu_type}. The instruction set is not changed. -+ -+Native Linux/GNU toolchains also support the value @samp{native}, -+which selects the best architecture option for the host processor. -+@option{-mtune=native} has no effect if GCC does not recognize -+the processor. -+ -+@item -mmemory-latency=@var{time} -+@opindex mmemory-latency -+Sets the latency the scheduler should assume for typical memory -+references as seen by the application. This number is highly -+dependent on the memory access patterns used by the application -+and the size of the external cache on the machine. -+ -+Valid options for @var{time} are -+ -+@table @samp -+@item @var{number} -+A decimal number representing clock cycles. -+ -+@item L1 -+@itemx L2 -+@itemx L3 -+@itemx main -+The compiler contains estimates of the number of clock cycles for -+``typical'' EV4 & EV5 hardware for the Level 1, 2 & 3 caches -+(also called Dcache, Scache, and Bcache), as well as to main memory. -+Note that L3 is only valid for EV5. -+ -+@end table -+@end table -+ -+@node DEC Alpha/VMS Options -+@subsection DEC Alpha/VMS Options -+ -+These @samp{-m} options are defined for the DEC Alpha/VMS implementations: -+ -+@table @gcctabopt -+@item -mvms-return-codes -+@opindex mvms-return-codes -+Return VMS condition codes from main. The default is to return POSIX -+style condition (e.g.@: error) codes. -+@end table -+ -+@node FR30 Options -+@subsection FR30 Options -+@cindex FR30 Options -+ -+These options are defined specifically for the FR30 port. -+ -+@table @gcctabopt -+ -+@item -msmall-model -+@opindex msmall-model -+Use the small address space model. This can produce smaller code, but -+it does assume that all symbolic values and addresses will fit into a -+20-bit range. -+ -+@item -mno-lsim -+@opindex mno-lsim -+Assume that run-time support has been provided and so there is no need -+to include the simulator library (@file{libsim.a}) on the linker -+command line. -+ -+@end table -+ -+@node FRV Options -+@subsection FRV Options -+@cindex FRV Options -+ -+@table @gcctabopt -+@item -mgpr-32 -+@opindex mgpr-32 -+ -+Only use the first 32 general purpose registers. -+ -+@item -mgpr-64 -+@opindex mgpr-64 -+ -+Use all 64 general purpose registers. -+ -+@item -mfpr-32 -+@opindex mfpr-32 -+ -+Use only the first 32 floating point registers. -+ -+@item -mfpr-64 -+@opindex mfpr-64 -+ -+Use all 64 floating point registers -+ -+@item -mhard-float -+@opindex mhard-float -+ -+Use hardware instructions for floating point operations. -+ -+@item -msoft-float -+@opindex msoft-float -+ -+Use library routines for floating point operations. -+ -+@item -malloc-cc -+@opindex malloc-cc -+ -+Dynamically allocate condition code registers. -+ -+@item -mfixed-cc -+@opindex mfixed-cc -+ -+Do not try to dynamically allocate condition code registers, only -+use @code{icc0} and @code{fcc0}. -+ -+@item -mdword -+@opindex mdword -+ -+Change ABI to use double word insns. -+ -+@item -mno-dword -+@opindex mno-dword -+ -+Do not use double word instructions. -+ -+@item -mdouble -+@opindex mdouble -+ -+Use floating point double instructions. -+ -+@item -mno-double -+@opindex mno-double -+ -+Do not use floating point double instructions. -+ -+@item -mmedia -+@opindex mmedia -+ -+Use media instructions. -+ -+@item -mno-media -+@opindex mno-media -+ -+Do not use media instructions. -+ -+@item -mmuladd -+@opindex mmuladd -+ -+Use multiply and add/subtract instructions. -+ -+@item -mno-muladd -+@opindex mno-muladd -+ -+Do not use multiply and add/subtract instructions. -+ -+@item -mfdpic -+@opindex mfdpic -+ -+Select the FDPIC ABI, that uses function descriptors to represent -+pointers to functions. Without any PIC/PIE-related options, it -+implies @option{-fPIE}. With @option{-fpic} or @option{-fpie}, it -+assumes GOT entries and small data are within a 12-bit range from the -+GOT base address; with @option{-fPIC} or @option{-fPIE}, GOT offsets -+are computed with 32 bits. -+With a @samp{bfin-elf} target, this option implies @option{-msim}. -+ -+@item -minline-plt -+@opindex minline-plt -+ -+Enable inlining of PLT entries in function calls to functions that are -+not known to bind locally. It has no effect without @option{-mfdpic}. -+It's enabled by default if optimizing for speed and compiling for -+shared libraries (i.e., @option{-fPIC} or @option{-fpic}), or when an -+optimization option such as @option{-O3} or above is present in the -+command line. -+ -+@item -mTLS -+@opindex TLS -+ -+Assume a large TLS segment when generating thread-local code. -+ -+@item -mtls -+@opindex tls -+ -+Do not assume a large TLS segment when generating thread-local code. -+ -+@item -mgprel-ro -+@opindex mgprel-ro -+ -+Enable the use of @code{GPREL} relocations in the FDPIC ABI for data -+that is known to be in read-only sections. It's enabled by default, -+except for @option{-fpic} or @option{-fpie}: even though it may help -+make the global offset table smaller, it trades 1 instruction for 4. -+With @option{-fPIC} or @option{-fPIE}, it trades 3 instructions for 4, -+one of which may be shared by multiple symbols, and it avoids the need -+for a GOT entry for the referenced symbol, so it's more likely to be a -+win. If it is not, @option{-mno-gprel-ro} can be used to disable it. -+ -+@item -multilib-library-pic -+@opindex multilib-library-pic -+ -+Link with the (library, not FD) pic libraries. It's implied by -+@option{-mlibrary-pic}, as well as by @option{-fPIC} and -+@option{-fpic} without @option{-mfdpic}. You should never have to use -+it explicitly. -+ -+@item -mlinked-fp -+@opindex mlinked-fp -+ -+Follow the EABI requirement of always creating a frame pointer whenever -+a stack frame is allocated. This option is enabled by default and can -+be disabled with @option{-mno-linked-fp}. -+ -+@item -mlong-calls -+@opindex mlong-calls -+ -+Use indirect addressing to call functions outside the current -+compilation unit. This allows the functions to be placed anywhere -+within the 32-bit address space. -+ -+@item -malign-labels -+@opindex malign-labels -+ -+Try to align labels to an 8-byte boundary by inserting nops into the -+previous packet. This option only has an effect when VLIW packing -+is enabled. It doesn't create new packets; it merely adds nops to -+existing ones. -+ -+@item -mlibrary-pic -+@opindex mlibrary-pic -+ -+Generate position-independent EABI code. -+ -+@item -macc-4 -+@opindex macc-4 -+ -+Use only the first four media accumulator registers. -+ -+@item -macc-8 -+@opindex macc-8 -+ -+Use all eight media accumulator registers. -+ -+@item -mpack -+@opindex mpack -+ -+Pack VLIW instructions. -+ -+@item -mno-pack -+@opindex mno-pack -+ -+Do not pack VLIW instructions. -+ -+@item -mno-eflags -+@opindex mno-eflags -+ -+Do not mark ABI switches in e_flags. -+ -+@item -mcond-move -+@opindex mcond-move -+ -+Enable the use of conditional-move instructions (default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-cond-move -+@opindex mno-cond-move -+ -+Disable the use of conditional-move instructions. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mscc -+@opindex mscc -+ -+Enable the use of conditional set instructions (default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-scc -+@opindex mno-scc -+ -+Disable the use of conditional set instructions. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mcond-exec -+@opindex mcond-exec -+ -+Enable the use of conditional execution (default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-cond-exec -+@opindex mno-cond-exec -+ -+Disable the use of conditional execution. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mvliw-branch -+@opindex mvliw-branch -+ -+Run a pass to pack branches into VLIW instructions (default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-vliw-branch -+@opindex mno-vliw-branch -+ -+Do not run a pass to pack branches into VLIW instructions. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mmulti-cond-exec -+@opindex mmulti-cond-exec -+ -+Enable optimization of @code{&&} and @code{||} in conditional execution -+(default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-multi-cond-exec -+@opindex mno-multi-cond-exec -+ -+Disable optimization of @code{&&} and @code{||} in conditional execution. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mnested-cond-exec -+@opindex mnested-cond-exec -+ -+Enable nested conditional execution optimizations (default). -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -mno-nested-cond-exec -+@opindex mno-nested-cond-exec -+ -+Disable nested conditional execution optimizations. -+ -+This switch is mainly for debugging the compiler and will likely be removed -+in a future version. -+ -+@item -moptimize-membar -+@opindex moptimize-membar -+ -+This switch removes redundant @code{membar} instructions from the -+compiler generated code. It is enabled by default. -+ -+@item -mno-optimize-membar -+@opindex mno-optimize-membar -+ -+This switch disables the automatic removal of redundant @code{membar} -+instructions from the generated code. -+ -+@item -mtomcat-stats -+@opindex mtomcat-stats -+ -+Cause gas to print out tomcat statistics. -+ -+@item -mcpu=@var{cpu} -+@opindex mcpu -+ -+Select the processor type for which to generate code. Possible values are -+@samp{frv}, @samp{fr550}, @samp{tomcat}, @samp{fr500}, @samp{fr450}, -+@samp{fr405}, @samp{fr400}, @samp{fr300} and @samp{simple}. -+ -+@end table -+ -+@node GNU/Linux Options -+@subsection GNU/Linux Options -+ -+These @samp{-m} options are defined for GNU/Linux targets: -+ -+@table @gcctabopt -+@item -mglibc -+@opindex mglibc -+Use the GNU C library instead of uClibc. This is the default except -+on @samp{*-*-linux-*uclibc*} targets. -+ -+@item -muclibc -+@opindex muclibc -+Use uClibc instead of the GNU C library. This is the default on -+@samp{*-*-linux-*uclibc*} targets. -+@end table -+ -+@node H8/300 Options -+@subsection H8/300 Options -+ -+These @samp{-m} options are defined for the H8/300 implementations: -+ -+@table @gcctabopt -+@item -mrelax -+@opindex mrelax -+Shorten some address references at link time, when possible; uses the -+linker option @option{-relax}. @xref{H8/300,, @code{ld} and the H8/300, -+ld, Using ld}, for a fuller description. -+ -+@item -mh -+@opindex mh -+Generate code for the H8/300H@. -+ -+@item -ms -+@opindex ms -+Generate code for the H8S@. -+ -+@item -mn -+@opindex mn -+Generate code for the H8S and H8/300H in the normal mode. This switch -+must be used either with @option{-mh} or @option{-ms}. -+ -+@item -ms2600 -+@opindex ms2600 -+Generate code for the H8S/2600. This switch must be used with @option{-ms}. -+ -+@item -mint32 -+@opindex mint32 -+Make @code{int} data 32 bits by default. -+ -+@item -malign-300 -+@opindex malign-300 -+On the H8/300H and H8S, use the same alignment rules as for the H8/300. -+The default for the H8/300H and H8S is to align longs and floats on 4 -+byte boundaries. -+@option{-malign-300} causes them to be aligned on 2 byte boundaries. -+This option has no effect on the H8/300. -+@end table -+ -+@node HPPA Options -+@subsection HPPA Options -+@cindex HPPA Options -+ -+These @samp{-m} options are defined for the HPPA family of computers: -+ -+@table @gcctabopt -+@item -march=@var{architecture-type} -+@opindex march -+Generate code for the specified architecture. The choices for -+@var{architecture-type} are @samp{1.0} for PA 1.0, @samp{1.1} for PA -+1.1, and @samp{2.0} for PA 2.0 processors. Refer to -+@file{/usr/lib/sched.models} on an HP-UX system to determine the proper -+architecture option for your machine. Code compiled for lower numbered -+architectures will run on higher numbered architectures, but not the -+other way around. -+ -+@item -mpa-risc-1-0 -+@itemx -mpa-risc-1-1 -+@itemx -mpa-risc-2-0 -+@opindex mpa-risc-1-0 -+@opindex mpa-risc-1-1 -+@opindex mpa-risc-2-0 -+Synonyms for @option{-march=1.0}, @option{-march=1.1}, and @option{-march=2.0} respectively. -+ -+@item -mbig-switch -+@opindex mbig-switch -+Generate code suitable for big switch tables. Use this option only if -+the assembler/linker complain about out of range branches within a switch -+table. -+ -+@item -mjump-in-delay -+@opindex mjump-in-delay -+Fill delay slots of function calls with unconditional jump instructions -+by modifying the return pointer for the function call to be the target -+of the conditional jump. -+ -+@item -mdisable-fpregs -+@opindex mdisable-fpregs -+Prevent floating point registers from being used in any manner. This is -+necessary for compiling kernels which perform lazy context switching of -+floating point registers. If you use this option and attempt to perform -+floating point operations, the compiler will abort. -+ -+@item -mdisable-indexing -+@opindex mdisable-indexing -+Prevent the compiler from using indexing address modes. This avoids some -+rather obscure problems when compiling MIG generated code under MACH@. -+ -+@item -mno-space-regs -+@opindex mno-space-regs -+Generate code that assumes the target has no space registers. This allows -+GCC to generate faster indirect calls and use unscaled index address modes. -+ -+Such code is suitable for level 0 PA systems and kernels. -+ -+@item -mfast-indirect-calls -+@opindex mfast-indirect-calls -+Generate code that assumes calls never cross space boundaries. This -+allows GCC to emit code which performs faster indirect calls. -+ -+This option will not work in the presence of shared libraries or nested -+functions. -+ -+@item -mfixed-range=@var{register-range} -+@opindex mfixed-range -+Generate code treating the given register range as fixed registers. -+A fixed register is one that the register allocator can not use. This is -+useful when compiling kernel code. A register range is specified as -+two registers separated by a dash. Multiple register ranges can be -+specified separated by a comma. -+ -+@item -mlong-load-store -+@opindex mlong-load-store -+Generate 3-instruction load and store sequences as sometimes required by -+the HP-UX 10 linker. This is equivalent to the @samp{+k} option to -+the HP compilers. -+ -+@item -mportable-runtime -+@opindex mportable-runtime -+Use the portable calling conventions proposed by HP for ELF systems. -+ -+@item -mgas -+@opindex mgas -+Enable the use of assembler directives only GAS understands. -+ -+@item -mschedule=@var{cpu-type} -+@opindex mschedule -+Schedule code according to the constraints for the machine type -+@var{cpu-type}. The choices for @var{cpu-type} are @samp{700} -+@samp{7100}, @samp{7100LC}, @samp{7200}, @samp{7300} and @samp{8000}. Refer -+to @file{/usr/lib/sched.models} on an HP-UX system to determine the -+proper scheduling option for your machine. The default scheduling is -+@samp{8000}. -+ -+@item -mlinker-opt -+@opindex mlinker-opt -+Enable the optimization pass in the HP-UX linker. Note this makes symbolic -+debugging impossible. It also triggers a bug in the HP-UX 8 and HP-UX 9 -+linkers in which they give bogus error messages when linking some programs. -+ -+@item -msoft-float -+@opindex msoft-float -+Generate output containing library calls for floating point. -+@strong{Warning:} the requisite libraries are not available for all HPPA -+targets. Normally the facilities of the machine's usual C compiler are -+used, but this cannot be done directly in cross-compilation. You must make -+your own arrangements to provide suitable library functions for -+cross-compilation. -+ -+@option{-msoft-float} changes the calling convention in the output file; -+therefore, it is only useful if you compile @emph{all} of a program with -+this option. In particular, you need to compile @file{libgcc.a}, the -+library that comes with GCC, with @option{-msoft-float} in order for -+this to work. -+ -+@item -msio -+@opindex msio -+Generate the predefine, @code{_SIO}, for server IO@. The default is -+@option{-mwsio}. This generates the predefines, @code{__hp9000s700}, -+@code{__hp9000s700__} and @code{_WSIO}, for workstation IO@. These -+options are available under HP-UX and HI-UX@. -+ -+@item -mgnu-ld -+@opindex gnu-ld -+Use GNU ld specific options. This passes @option{-shared} to ld when -+building a shared library. It is the default when GCC is configured, -+explicitly or implicitly, with the GNU linker. This option does not -+have any affect on which ld is called, it only changes what parameters -+are passed to that ld. The ld that is called is determined by the -+@option{--with-ld} configure option, GCC's program search path, and -+finally by the user's @env{PATH}. The linker used by GCC can be printed -+using @samp{which `gcc -print-prog-name=ld`}. This option is only available -+on the 64 bit HP-UX GCC, i.e.@: configured with @samp{hppa*64*-*-hpux*}. -+ -+@item -mhp-ld -+@opindex hp-ld -+Use HP ld specific options. This passes @option{-b} to ld when building -+a shared library and passes @option{+Accept TypeMismatch} to ld on all -+links. It is the default when GCC is configured, explicitly or -+implicitly, with the HP linker. This option does not have any affect on -+which ld is called, it only changes what parameters are passed to that -+ld. The ld that is called is determined by the @option{--with-ld} -+configure option, GCC's program search path, and finally by the user's -+@env{PATH}. The linker used by GCC can be printed using @samp{which -+`gcc -print-prog-name=ld`}. This option is only available on the 64 bit -+HP-UX GCC, i.e.@: configured with @samp{hppa*64*-*-hpux*}. -+ -+@item -mlong-calls -+@opindex mno-long-calls -+Generate code that uses long call sequences. This ensures that a call -+is always able to reach linker generated stubs. The default is to generate -+long calls only when the distance from the call site to the beginning -+of the function or translation unit, as the case may be, exceeds a -+predefined limit set by the branch type being used. The limits for -+normal calls are 7,600,000 and 240,000 bytes, respectively for the -+PA 2.0 and PA 1.X architectures. Sibcalls are always limited at -+240,000 bytes. -+ -+Distances are measured from the beginning of functions when using the -+@option{-ffunction-sections} option, or when using the @option{-mgas} -+and @option{-mno-portable-runtime} options together under HP-UX with -+the SOM linker. -+ -+It is normally not desirable to use this option as it will degrade -+performance. However, it may be useful in large applications, -+particularly when partial linking is used to build the application. -+ -+The types of long calls used depends on the capabilities of the -+assembler and linker, and the type of code being generated. The -+impact on systems that support long absolute calls, and long pic -+symbol-difference or pc-relative calls should be relatively small. -+However, an indirect call is used on 32-bit ELF systems in pic code -+and it is quite long. -+ -+@item -munix=@var{unix-std} -+@opindex march -+Generate compiler predefines and select a startfile for the specified -+UNIX standard. The choices for @var{unix-std} are @samp{93}, @samp{95} -+and @samp{98}. @samp{93} is supported on all HP-UX versions. @samp{95} -+is available on HP-UX 10.10 and later. @samp{98} is available on HP-UX -+11.11 and later. The default values are @samp{93} for HP-UX 10.00, -+@samp{95} for HP-UX 10.10 though to 11.00, and @samp{98} for HP-UX 11.11 -+and later. -+ -+@option{-munix=93} provides the same predefines as GCC 3.3 and 3.4. -+@option{-munix=95} provides additional predefines for @code{XOPEN_UNIX} -+and @code{_XOPEN_SOURCE_EXTENDED}, and the startfile @file{unix95.o}. -+@option{-munix=98} provides additional predefines for @code{_XOPEN_UNIX}, -+@code{_XOPEN_SOURCE_EXTENDED}, @code{_INCLUDE__STDC_A1_SOURCE} and -+@code{_INCLUDE_XOPEN_SOURCE_500}, and the startfile @file{unix98.o}. -+ -+It is @emph{important} to note that this option changes the interfaces -+for various library routines. It also affects the operational behavior -+of the C library. Thus, @emph{extreme} care is needed in using this -+option. -+ -+Library code that is intended to operate with more than one UNIX -+standard must test, set and restore the variable @var{__xpg4_extended_mask} -+as appropriate. Most GNU software doesn't provide this capability. -+ -+@item -nolibdld -+@opindex nolibdld -+Suppress the generation of link options to search libdld.sl when the -+@option{-static} option is specified on HP-UX 10 and later. -+ -+@item -static -+@opindex static -+The HP-UX implementation of setlocale in libc has a dependency on -+libdld.sl. There isn't an archive version of libdld.sl. Thus, -+when the @option{-static} option is specified, special link options -+are needed to resolve this dependency. -+ -+On HP-UX 10 and later, the GCC driver adds the necessary options to -+link with libdld.sl when the @option{-static} option is specified. -+This causes the resulting binary to be dynamic. On the 64-bit port, -+the linkers generate dynamic binaries by default in any case. The -+@option{-nolibdld} option can be used to prevent the GCC driver from -+adding these link options. -+ -+@item -threads -+@opindex threads -+Add support for multithreading with the @dfn{dce thread} library -+under HP-UX@. This option sets flags for both the preprocessor and -+linker. -+@end table -+ -+@node i386 and x86-64 Options -+@subsection Intel 386 and AMD x86-64 Options -+@cindex i386 Options -+@cindex x86-64 Options -+@cindex Intel 386 Options -+@cindex AMD x86-64 Options -+ -+These @samp{-m} options are defined for the i386 and x86-64 family of -+computers: -+ -+@table @gcctabopt -+@item -mtune=@var{cpu-type} -+@opindex mtune -+Tune to @var{cpu-type} everything applicable about the generated code, except -+for the ABI and the set of available instructions. The choices for -+@var{cpu-type} are: -+@table @emph -+@item generic -+Produce code optimized for the most common IA32/AMD64/EM64T processors. -+If you know the CPU on which your code will run, then you should use -+the corresponding @option{-mtune} option instead of -+@option{-mtune=generic}. But, if you do not know exactly what CPU users -+of your application will have, then you should use this option. -+ -+As new processors are deployed in the marketplace, the behavior of this -+option will change. Therefore, if you upgrade to a newer version of -+GCC, the code generated option will change to reflect the processors -+that were most common when that version of GCC was released. -+ -+There is no @option{-march=generic} option because @option{-march} -+indicates the instruction set the compiler can use, and there is no -+generic instruction set applicable to all processors. In contrast, -+@option{-mtune} indicates the processor (or, in this case, collection of -+processors) for which the code is optimized. -+@item native -+This selects the CPU to tune for at compilation time by determining -+the processor type of the compiling machine. Using @option{-mtune=native} -+will produce code optimized for the local machine under the constraints -+of the selected instruction set. Using @option{-march=native} will -+enable all instruction subsets supported by the local machine (hence -+the result might not run on different machines). -+@item i386 -+Original Intel's i386 CPU@. -+@item i486 -+Intel's i486 CPU@. (No scheduling is implemented for this chip.) -+@item i586, pentium -+Intel Pentium CPU with no MMX support. -+@item pentium-mmx -+Intel PentiumMMX CPU based on Pentium core with MMX instruction set support. -+@item pentiumpro -+Intel PentiumPro CPU@. -+@item i686 -+Same as @code{generic}, but when used as @code{march} option, PentiumPro -+instruction set will be used, so the code will run on all i686 family chips. -+@item pentium2 -+Intel Pentium2 CPU based on PentiumPro core with MMX instruction set support. -+@item pentium3, pentium3m -+Intel Pentium3 CPU based on PentiumPro core with MMX and SSE instruction set -+support. -+@item pentium-m -+Low power version of Intel Pentium3 CPU with MMX, SSE and SSE2 instruction set -+support. Used by Centrino notebooks. -+@item pentium4, pentium4m -+Intel Pentium4 CPU with MMX, SSE and SSE2 instruction set support. -+@item prescott -+Improved version of Intel Pentium4 CPU with MMX, SSE, SSE2 and SSE3 instruction -+set support. -+@item nocona -+Improved version of Intel Pentium4 CPU with 64-bit extensions, MMX, SSE, -+SSE2 and SSE3 instruction set support. -+@item core2 -+Intel Core2 CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3 and SSSE3 -+instruction set support. -+@item k6 -+AMD K6 CPU with MMX instruction set support. -+@item k6-2, k6-3 -+Improved versions of AMD K6 CPU with MMX and 3dNOW!@: instruction set support. -+@item athlon, athlon-tbird -+AMD Athlon CPU with MMX, 3dNOW!, enhanced 3dNOW!@: and SSE prefetch instructions -+support. -+@item athlon-4, athlon-xp, athlon-mp -+Improved AMD Athlon CPU with MMX, 3dNOW!, enhanced 3dNOW!@: and full SSE -+instruction set support. -+@item k8, opteron, athlon64, athlon-fx -+AMD K8 core based CPUs with x86-64 instruction set support. (This supersets -+MMX, SSE, SSE2, 3dNOW!, enhanced 3dNOW!@: and 64-bit instruction set extensions.) -+@item k8-sse3, opteron-sse3, athlon64-sse3 -+Improved versions of k8, opteron and athlon64 with SSE3 instruction set support. -+@item amdfam10, barcelona -+AMD Family 10h core based CPUs with x86-64 instruction set support. (This -+supersets MMX, SSE, SSE2, SSE3, SSE4A, 3dNOW!, enhanced 3dNOW!, ABM and 64-bit -+instruction set extensions.) -+@item winchip-c6 -+IDT Winchip C6 CPU, dealt in same way as i486 with additional MMX instruction -+set support. -+@item winchip2 -+IDT Winchip2 CPU, dealt in same way as i486 with additional MMX and 3dNOW!@: -+instruction set support. -+@item c3 -+Via C3 CPU with MMX and 3dNOW!@: instruction set support. (No scheduling is -+implemented for this chip.) -+@item c3-2 -+Via C3-2 CPU with MMX and SSE instruction set support. (No scheduling is -+implemented for this chip.) -+@item geode -+Embedded AMD CPU with MMX and 3dNOW! instruction set support. -+@end table -+ -+While picking a specific @var{cpu-type} will schedule things appropriately -+for that particular chip, the compiler will not generate any code that -+does not run on the i386 without the @option{-march=@var{cpu-type}} option -+being used. -+ -+@item -march=@var{cpu-type} -+@opindex march -+Generate instructions for the machine type @var{cpu-type}. The choices -+for @var{cpu-type} are the same as for @option{-mtune}. Moreover, -+specifying @option{-march=@var{cpu-type}} implies @option{-mtune=@var{cpu-type}}. -+ -+@item -mcpu=@var{cpu-type} -+@opindex mcpu -+A deprecated synonym for @option{-mtune}. -+ -+@item -mfpmath=@var{unit} -+@opindex march -+Generate floating point arithmetics for selected unit @var{unit}. The choices -+for @var{unit} are: -+ -+@table @samp -+@item 387 -+Use the standard 387 floating point coprocessor present majority of chips and -+emulated otherwise. Code compiled with this option will run almost everywhere. -+The temporary results are computed in 80bit precision instead of precision -+specified by the type resulting in slightly different results compared to most -+of other chips. See @option{-ffloat-store} for more detailed description. -+ -+This is the default choice for i386 compiler. -+ -+@item sse -+Use scalar floating point instructions present in the SSE instruction set. -+This instruction set is supported by Pentium3 and newer chips, in the AMD line -+by Athlon-4, Athlon-xp and Athlon-mp chips. The earlier version of SSE -+instruction set supports only single precision arithmetics, thus the double and -+extended precision arithmetics is still done using 387. Later version, present -+only in Pentium4 and the future AMD x86-64 chips supports double precision -+arithmetics too. -+ -+For the i386 compiler, you need to use @option{-march=@var{cpu-type}}, @option{-msse} -+or @option{-msse2} switches to enable SSE extensions and make this option -+effective. For the x86-64 compiler, these extensions are enabled by default. -+ -+The resulting code should be considerably faster in the majority of cases and avoid -+the numerical instability problems of 387 code, but may break some existing -+code that expects temporaries to be 80bit. -+ -+This is the default choice for the x86-64 compiler. -+ -+@item sse,387 -+@itemx sse+387 -+@itemx both -+Attempt to utilize both instruction sets at once. This effectively double the -+amount of available registers and on chips with separate execution units for -+387 and SSE the execution resources too. Use this option with care, as it is -+still experimental, because the GCC register allocator does not model separate -+functional units well resulting in instable performance. -+@end table -+ -+@item -masm=@var{dialect} -+@opindex masm=@var{dialect} -+Output asm instructions using selected @var{dialect}. Supported -+choices are @samp{intel} or @samp{att} (the default one). Darwin does -+not support @samp{intel}. -+ -+@item -mieee-fp -+@itemx -mno-ieee-fp -+@opindex mieee-fp -+@opindex mno-ieee-fp -+Control whether or not the compiler uses IEEE floating point -+comparisons. These handle correctly the case where the result of a -+comparison is unordered. -+ -+@item -msoft-float -+@opindex msoft-float -+Generate output containing library calls for floating point. -+@strong{Warning:} the requisite libraries are not part of GCC@. -+Normally the facilities of the machine's usual C compiler are used, but -+this can't be done directly in cross-compilation. You must make your -+own arrangements to provide suitable library functions for -+cross-compilation. -+ -+On machines where a function returns floating point results in the 80387 -+register stack, some floating point opcodes may be emitted even if -+@option{-msoft-float} is used. -+ -+@item -mno-fp-ret-in-387 -+@opindex mno-fp-ret-in-387 -+Do not use the FPU registers for return values of functions. -+ -+The usual calling convention has functions return values of types -+@code{float} and @code{double} in an FPU register, even if there -+is no FPU@. The idea is that the operating system should emulate -+an FPU@. -+ -+The option @option{-mno-fp-ret-in-387} causes such values to be returned -+in ordinary CPU registers instead. -+ -+@item -mno-fancy-math-387 -+@opindex mno-fancy-math-387 -+Some 387 emulators do not support the @code{sin}, @code{cos} and -+@code{sqrt} instructions for the 387. Specify this option to avoid -+generating those instructions. This option is the default on FreeBSD, -+OpenBSD and NetBSD@. This option is overridden when @option{-march} -+indicates that the target cpu will always have an FPU and so the -+instruction will not need emulation. As of revision 2.6.1, these -+instructions are not generated unless you also use the -+@option{-funsafe-math-optimizations} switch. -+ -+@item -malign-double -+@itemx -mno-align-double -+@opindex malign-double -+@opindex mno-align-double -+Control whether GCC aligns @code{double}, @code{long double}, and -+@code{long long} variables on a two word boundary or a one word -+boundary. Aligning @code{double} variables on a two word boundary will -+produce code that runs somewhat faster on a @samp{Pentium} at the -+expense of more memory. -+ -+On x86-64, @option{-malign-double} is enabled by default. -+ -+@strong{Warning:} if you use the @option{-malign-double} switch, -+structures containing the above types will be aligned differently than -+the published application binary interface specifications for the 386 -+and will not be binary compatible with structures in code compiled -+without that switch. -+ -+@item -m96bit-long-double -+@itemx -m128bit-long-double -+@opindex m96bit-long-double -+@opindex m128bit-long-double -+These switches control the size of @code{long double} type. The i386 -+application binary interface specifies the size to be 96 bits, -+so @option{-m96bit-long-double} is the default in 32 bit mode. -+ -+Modern architectures (Pentium and newer) would prefer @code{long double} -+to be aligned to an 8 or 16 byte boundary. In arrays or structures -+conforming to the ABI, this would not be possible. So specifying a -+@option{-m128bit-long-double} will align @code{long double} -+to a 16 byte boundary by padding the @code{long double} with an additional -+32 bit zero. -+ -+In the x86-64 compiler, @option{-m128bit-long-double} is the default choice as -+its ABI specifies that @code{long double} is to be aligned on 16 byte boundary. -+ -+Notice that neither of these options enable any extra precision over the x87 -+standard of 80 bits for a @code{long double}. -+ -+@strong{Warning:} if you override the default value for your target ABI, the -+structures and arrays containing @code{long double} variables will change -+their size as well as function calling convention for function taking -+@code{long double} will be modified. Hence they will not be binary -+compatible with arrays or structures in code compiled without that switch. -+ -+@item -mlarge-data-threshold=@var{number} -+@opindex mlarge-data-threshold=@var{number} -+When @option{-mcmodel=medium} is specified, the data greater than -+@var{threshold} are placed in large data section. This value must be the -+same across all object linked into the binary and defaults to 65535. -+ -+@item -mrtd -+@opindex mrtd -+Use a different function-calling convention, in which functions that -+take a fixed number of arguments return with the @code{ret} @var{num} -+instruction, which pops their arguments while returning. This saves one -+instruction in the caller since there is no need to pop the arguments -+there. -+ -+You can specify that an individual function is called with this calling -+sequence with the function attribute @samp{stdcall}. You can also -+override the @option{-mrtd} option by using the function attribute -+@samp{cdecl}. @xref{Function Attributes}. -+ -+@strong{Warning:} this calling convention is incompatible with the one -+normally used on Unix, so you cannot use it if you need to call -+libraries compiled with the Unix compiler. -+ -+Also, you must provide function prototypes for all functions that -+take variable numbers of arguments (including @code{printf}); -+otherwise incorrect code will be generated for calls to those -+functions. -+ -+In addition, seriously incorrect code will result if you call a -+function with too many arguments. (Normally, extra arguments are -+harmlessly ignored.) -+ -+@item -mregparm=@var{num} -+@opindex mregparm -+Control how many registers are used to pass integer arguments. By -+default, no registers are used to pass arguments, and at most 3 -+registers can be used. You can control this behavior for a specific -+function by using the function attribute @samp{regparm}. -+@xref{Function Attributes}. -+ -+@strong{Warning:} if you use this switch, and -+@var{num} is nonzero, then you must build all modules with the same -+value, including any libraries. This includes the system libraries and -+startup modules. -+ -+@item -msseregparm -+@opindex msseregparm -+Use SSE register passing conventions for float and double arguments -+and return values. You can control this behavior for a specific -+function by using the function attribute @samp{sseregparm}. -+@xref{Function Attributes}. -+ -+@strong{Warning:} if you use this switch then you must build all -+modules with the same value, including any libraries. This includes -+the system libraries and startup modules. -+ -+@item -mpc32 -+@itemx -mpc64 -+@itemx -mpc80 -+@opindex mpc32 -+@opindex mpc64 -+@opindex mpc80 -+ -+Set 80387 floating-point precision to 32, 64 or 80 bits. When @option{-mpc32} -+is specified, the significands of results of floating-point operations are -+rounded to 24 bits (single precision); @option{-mpc64} rounds the -+significands of results of floating-point operations to 53 bits (double -+precision) and @option{-mpc80} rounds the significands of results of -+floating-point operations to 64 bits (extended double precision), which is -+the default. When this option is used, floating-point operations in higher -+precisions are not available to the programmer without setting the FPU -+control word explicitly. -+ -+Setting the rounding of floating-point operations to less than the default -+80 bits can speed some programs by 2% or more. Note that some mathematical -+libraries assume that extended precision (80 bit) floating-point operations -+are enabled by default; routines in such libraries could suffer significant -+loss of accuracy, typically through so-called "catastrophic cancellation", -+when this option is used to set the precision to less than extended precision. -+ -+@item -mstackrealign -+@opindex mstackrealign -+Realign the stack at entry. On the Intel x86, the @option{-mstackrealign} -+option will generate an alternate prologue and epilogue that realigns the -+runtime stack if necessary. This supports mixing legacy codes that keep -+a 4-byte aligned stack with modern codes that keep a 16-byte stack for -+SSE compatibility. See also the attribute @code{force_align_arg_pointer}, -+applicable to individual functions. -+ -+@item -mpreferred-stack-boundary=@var{num} -+@opindex mpreferred-stack-boundary -+Attempt to keep the stack boundary aligned to a 2 raised to @var{num} -+byte boundary. If @option{-mpreferred-stack-boundary} is not specified, -+the default is 4 (16 bytes or 128 bits). -+ -+@item -mincoming-stack-boundary=@var{num} -+@opindex mincoming-stack-boundary -+Assume the incoming stack is aligned to a 2 raised to @var{num} byte -+boundary. If @option{-mincoming-stack-boundary} is not specified, -+the one specified by @option{-mpreferred-stack-boundary} will be used. -+ -+On Pentium and PentiumPro, @code{double} and @code{long double} values -+should be aligned to an 8 byte boundary (see @option{-malign-double}) or -+suffer significant run time performance penalties. On Pentium III, the -+Streaming SIMD Extension (SSE) data type @code{__m128} may not work -+properly if it is not 16 byte aligned. -+ -+To ensure proper alignment of this values on the stack, the stack boundary -+must be as aligned as that required by any value stored on the stack. -+Further, every function must be generated such that it keeps the stack -+aligned. Thus calling a function compiled with a higher preferred -+stack boundary from a function compiled with a lower preferred stack -+boundary will most likely misalign the stack. It is recommended that -+libraries that use callbacks always use the default setting. -+ -+This extra alignment does consume extra stack space, and generally -+increases code size. Code that is sensitive to stack space usage, such -+as embedded systems and operating system kernels, may want to reduce the -+preferred alignment to @option{-mpreferred-stack-boundary=2}. -+ -+@item -mmmx -+@itemx -mno-mmx -+@itemx -msse -+@itemx -mno-sse -+@itemx -msse2 -+@itemx -mno-sse2 -+@itemx -msse3 -+@itemx -mno-sse3 -+@itemx -mssse3 -+@itemx -mno-ssse3 -+@itemx -msse4.1 -+@itemx -mno-sse4.1 -+@itemx -msse4.2 -+@itemx -mno-sse4.2 -+@itemx -msse4 -+@itemx -mno-sse4 -+@itemx -mavx -+@itemx -mno-avx -+@itemx -maes -+@itemx -mno-aes -+@itemx -mpclmul -+@itemx -mno-pclmul -+@itemx -msse4a -+@itemx -mno-sse4a -+@itemx -msse5 -+@itemx -mno-sse5 -+@itemx -m3dnow -+@itemx -mno-3dnow -+@itemx -mpopcnt -+@itemx -mno-popcnt -+@itemx -mabm -+@itemx -mno-abm -+@opindex mmmx -+@opindex mno-mmx -+@opindex msse -+@opindex mno-sse -+@opindex m3dnow -+@opindex mno-3dnow -+These switches enable or disable the use of instructions in the MMX, -+SSE, SSE2, SSE3, SSSE3, SSE4.1, AVX, AES, PCLMUL, SSE4A, SSE5, ABM or -+3DNow!@: extended instruction sets. -+These extensions are also available as built-in functions: see -+@ref{X86 Built-in Functions}, for details of the functions enabled and -+disabled by these switches. -+ -+To have SSE/SSE2 instructions generated automatically from floating-point -+code (as opposed to 387 instructions), see @option{-mfpmath=sse}. -+ -+GCC depresses SSEx instructions when @option{-mavx} is used. Instead, it -+generates new AVX instructions or AVX equivalence for all SSEx instructions -+when needed. -+ -+These options will enable GCC to use these extended instructions in -+generated code, even without @option{-mfpmath=sse}. Applications which -+perform runtime CPU detection must compile separate files for each -+supported architecture, using the appropriate flags. In particular, -+the file containing the CPU detection code should be compiled without -+these options. -+ -+@item -mcld -+@opindex mcld -+This option instructs GCC to emit a @code{cld} instruction in the prologue -+of functions that use string instructions. String instructions depend on -+the DF flag to select between autoincrement or autodecrement mode. While the -+ABI specifies the DF flag to be cleared on function entry, some operating -+systems violate this specification by not clearing the DF flag in their -+exception dispatchers. The exception handler can be invoked with the DF flag -+set which leads to wrong direction mode, when string instructions are used. -+This option can be enabled by default on 32-bit x86 targets by configuring -+GCC with the @option{--enable-cld} configure option. Generation of @code{cld} -+instructions can be suppressed with the @option{-mno-cld} compiler option -+in this case. -+ -+@item -mcx16 -+@opindex mcx16 -+This option will enable GCC to use CMPXCHG16B instruction in generated code. -+CMPXCHG16B allows for atomic operations on 128-bit double quadword (or oword) -+data types. This is useful for high resolution counters that could be updated -+by multiple processors (or cores). This instruction is generated as part of -+atomic built-in functions: see @ref{Atomic Builtins} for details. -+ -+@item -msahf -+@opindex msahf -+This option will enable GCC to use SAHF instruction in generated 64-bit code. -+Early Intel CPUs with Intel 64 lacked LAHF and SAHF instructions supported -+by AMD64 until introduction of Pentium 4 G1 step in December 2005. LAHF and -+SAHF are load and store instructions, respectively, for certain status flags. -+In 64-bit mode, SAHF instruction is used to optimize @code{fmod}, @code{drem} -+or @code{remainder} built-in functions: see @ref{Other Builtins} for details. -+ -+@item -mrecip -+@opindex mrecip -+This option will enable GCC to use RCPSS and RSQRTSS instructions (and their -+vectorized variants RCPPS and RSQRTPS) with an additional Newton-Raphson step -+to increase precision instead of DIVSS and SQRTSS (and their vectorized -+variants) for single precision floating point arguments. These instructions -+are generated only when @option{-funsafe-math-optimizations} is enabled -+together with @option{-finite-math-only} and @option{-fno-trapping-math}. -+Note that while the throughput of the sequence is higher than the throughput -+of the non-reciprocal instruction, the precision of the sequence can be -+decreased by up to 2 ulp (i.e. the inverse of 1.0 equals 0.99999994). -+ -+@item -mveclibabi=@var{type} -+@opindex mveclibabi -+Specifies the ABI type to use for vectorizing intrinsics using an -+external library. Supported types are @code{svml} for the Intel short -+vector math library and @code{acml} for the AMD math core library style -+of interfacing. GCC will currently emit calls to @code{vmldExp2}, -+@code{vmldLn2}, @code{vmldLog102}, @code{vmldLog102}, @code{vmldPow2}, -+@code{vmldTanh2}, @code{vmldTan2}, @code{vmldAtan2}, @code{vmldAtanh2}, -+@code{vmldCbrt2}, @code{vmldSinh2}, @code{vmldSin2}, @code{vmldAsinh2}, -+@code{vmldAsin2}, @code{vmldCosh2}, @code{vmldCos2}, @code{vmldAcosh2}, -+@code{vmldAcos2}, @code{vmlsExp4}, @code{vmlsLn4}, @code{vmlsLog104}, -+@code{vmlsLog104}, @code{vmlsPow4}, @code{vmlsTanh4}, @code{vmlsTan4}, -+@code{vmlsAtan4}, @code{vmlsAtanh4}, @code{vmlsCbrt4}, @code{vmlsSinh4}, -+@code{vmlsSin4}, @code{vmlsAsinh4}, @code{vmlsAsin4}, @code{vmlsCosh4}, -+@code{vmlsCos4}, @code{vmlsAcosh4} and @code{vmlsAcos4} for corresponding -+function type when @option{-mveclibabi=svml} is used and @code{__vrd2_sin}, -+@code{__vrd2_cos}, @code{__vrd2_exp}, @code{__vrd2_log}, @code{__vrd2_log2}, -+@code{__vrd2_log10}, @code{__vrs4_sinf}, @code{__vrs4_cosf}, -+@code{__vrs4_expf}, @code{__vrs4_logf}, @code{__vrs4_log2f}, -+@code{__vrs4_log10f} and @code{__vrs4_powf} for corresponding function type -+when @option{-mveclibabi=acml} is used. Both @option{-ftree-vectorize} and -+@option{-funsafe-math-optimizations} have to be enabled. A SVML or ACML ABI -+compatible library will have to be specified at link time. -+ -+@item -mpush-args -+@itemx -mno-push-args -+@opindex mpush-args -+@opindex mno-push-args -+Use PUSH operations to store outgoing parameters. This method is shorter -+and usually equally fast as method using SUB/MOV operations and is enabled -+by default. In some cases disabling it may improve performance because of -+improved scheduling and reduced dependencies. -+ -+@item -maccumulate-outgoing-args -+@opindex maccumulate-outgoing-args -+If enabled, the maximum amount of space required for outgoing arguments will be -+computed in the function prologue. This is faster on most modern CPUs -+because of reduced dependencies, improved scheduling and reduced stack usage -+when preferred stack boundary is not equal to 2. The drawback is a notable -+increase in code size. This switch implies @option{-mno-push-args}. -+ -+@item -mthreads -+@opindex mthreads -+Support thread-safe exception handling on @samp{Mingw32}. Code that relies -+on thread-safe exception handling must compile and link all code with the -+@option{-mthreads} option. When compiling, @option{-mthreads} defines -+@option{-D_MT}; when linking, it links in a special thread helper library -+@option{-lmingwthrd} which cleans up per thread exception handling data. -+ -+@item -mno-align-stringops -+@opindex mno-align-stringops -+Do not align destination of inlined string operations. This switch reduces -+code size and improves performance in case the destination is already aligned, -+but GCC doesn't know about it. -+ -+@item -minline-all-stringops -+@opindex minline-all-stringops -+By default GCC inlines string operations only when destination is known to be -+aligned at least to 4 byte boundary. This enables more inlining, increase code -+size, but may improve performance of code that depends on fast memcpy, strlen -+and memset for short lengths. -+ -+@item -minline-stringops-dynamically -+@opindex minline-stringops-dynamically -+For string operation of unknown size, inline runtime checks so for small -+blocks inline code is used, while for large blocks library call is used. -+ -+@item -mstringop-strategy=@var{alg} -+@opindex mstringop-strategy=@var{alg} -+Overwrite internal decision heuristic about particular algorithm to inline -+string operation with. The allowed values are @code{rep_byte}, -+@code{rep_4byte}, @code{rep_8byte} for expanding using i386 @code{rep} prefix -+of specified size, @code{byte_loop}, @code{loop}, @code{unrolled_loop} for -+expanding inline loop, @code{libcall} for always expanding library call. -+ -+@item -momit-leaf-frame-pointer -+@opindex momit-leaf-frame-pointer -+Don't keep the frame pointer in a register for leaf functions. This -+avoids the instructions to save, set up and restore frame pointers and -+makes an extra register available in leaf functions. The option -+@option{-fomit-frame-pointer} removes the frame pointer for all functions -+which might make debugging harder. -+ -+@item -mtls-direct-seg-refs -+@itemx -mno-tls-direct-seg-refs -+@opindex mtls-direct-seg-refs -+Controls whether TLS variables may be accessed with offsets from the -+TLS segment register (@code{%gs} for 32-bit, @code{%fs} for 64-bit), -+or whether the thread base pointer must be added. Whether or not this -+is legal depends on the operating system, and whether it maps the -+segment to cover the entire TLS area. -+ -+For systems that use GNU libc, the default is on. -+ -+@item -mfused-madd -+@itemx -mno-fused-madd -+@opindex mfused-madd -+Enable automatic generation of fused floating point multiply-add instructions -+if the ISA supports such instructions. The -mfused-madd option is on by -+default. The fused multiply-add instructions have a different -+rounding behavior compared to executing a multiply followed by an add. -+ -+@item -msse2avx -+@itemx -mno-sse2avx -+@opindex msse2avx -+Specify that the assembler should encode SSE instructions with VEX -+prefix. The option @option{-mavx} turns this on by default. -+@end table -+ -+These @samp{-m} switches are supported in addition to the above -+on AMD x86-64 processors in 64-bit environments. -+ -+@table @gcctabopt -+@item -m32 -+@itemx -m64 -+@opindex m32 -+@opindex m64 -+Generate code for a 32-bit or 64-bit environment. -+The 32-bit environment sets int, long and pointer to 32 bits and -+generates code that runs on any i386 system. -+The 64-bit environment sets int to 32 bits and long and pointer -+to 64 bits and generates code for AMD's x86-64 architecture. For -+darwin only the -m64 option turns off the @option{-fno-pic} and -+@option{-mdynamic-no-pic} options. -+ -+@item -mno-red-zone -+@opindex no-red-zone -+Do not use a so called red zone for x86-64 code. The red zone is mandated -+by the x86-64 ABI, it is a 128-byte area beyond the location of the -+stack pointer that will not be modified by signal or interrupt handlers -+and therefore can be used for temporary data without adjusting the stack -+pointer. The flag @option{-mno-red-zone} disables this red zone. -+ -+@item -mcmodel=small -+@opindex mcmodel=small -+Generate code for the small code model: the program and its symbols must -+be linked in the lower 2 GB of the address space. Pointers are 64 bits. -+Programs can be statically or dynamically linked. This is the default -+code model. -+ -+@item -mcmodel=kernel -+@opindex mcmodel=kernel -+Generate code for the kernel code model. The kernel runs in the -+negative 2 GB of the address space. -+This model has to be used for Linux kernel code. -+ -+@item -mcmodel=medium -+@opindex mcmodel=medium -+Generate code for the medium model: The program is linked in the lower 2 -+GB of the address space. Small symbols are also placed there. Symbols -+with sizes larger than @option{-mlarge-data-threshold} are put into -+large data or bss sections and can be located above 2GB. Programs can -+be statically or dynamically linked. -+ -+@item -mcmodel=large -+@opindex mcmodel=large -+Generate code for the large model: This model makes no assumptions -+about addresses and sizes of sections. -+@end table -+ -+@node IA-64 Options -+@subsection IA-64 Options -+@cindex IA-64 Options -+ -+These are the @samp{-m} options defined for the Intel IA-64 architecture. -+ -+@table @gcctabopt -+@item -mbig-endian -+@opindex mbig-endian -+Generate code for a big endian target. This is the default for HP-UX@. -+ -+@item -mlittle-endian -+@opindex mlittle-endian -+Generate code for a little endian target. This is the default for AIX5 -+and GNU/Linux. -+ -+@item -mgnu-as -+@itemx -mno-gnu-as -+@opindex mgnu-as -+@opindex mno-gnu-as -+Generate (or don't) code for the GNU assembler. This is the default. -+@c Also, this is the default if the configure option @option{--with-gnu-as} -+@c is used. -+ -+@item -mgnu-ld -+@itemx -mno-gnu-ld -+@opindex mgnu-ld -+@opindex mno-gnu-ld -+Generate (or don't) code for the GNU linker. This is the default. -+@c Also, this is the default if the configure option @option{--with-gnu-ld} -+@c is used. -+ -+@item -mno-pic -+@opindex mno-pic -+Generate code that does not use a global pointer register. The result -+is not position independent code, and violates the IA-64 ABI@. -+ -+@item -mvolatile-asm-stop -+@itemx -mno-volatile-asm-stop -+@opindex mvolatile-asm-stop -+@opindex mno-volatile-asm-stop -+Generate (or don't) a stop bit immediately before and after volatile asm -+statements. -+ -+@item -mregister-names -+@itemx -mno-register-names -+@opindex mregister-names -+@opindex mno-register-names -+Generate (or don't) @samp{in}, @samp{loc}, and @samp{out} register names for -+the stacked registers. This may make assembler output more readable. -+ -+@item -mno-sdata -+@itemx -msdata -+@opindex mno-sdata -+@opindex msdata -+Disable (or enable) optimizations that use the small data section. This may -+be useful for working around optimizer bugs. -+ -+@item -mconstant-gp -+@opindex mconstant-gp -+Generate code that uses a single constant global pointer value. This is -+useful when compiling kernel code. -+ -+@item -mauto-pic -+@opindex mauto-pic -+Generate code that is self-relocatable. This implies @option{-mconstant-gp}. -+This is useful when compiling firmware code. -+ -+@item -minline-float-divide-min-latency -+@opindex minline-float-divide-min-latency -+Generate code for inline divides of floating point values -+using the minimum latency algorithm. -+ -+@item -minline-float-divide-max-throughput -+@opindex minline-float-divide-max-throughput -+Generate code for inline divides of floating point values -+using the maximum throughput algorithm. -+ -+@item -minline-int-divide-min-latency -+@opindex minline-int-divide-min-latency -+Generate code for inline divides of integer values -+using the minimum latency algorithm. -+ -+@item -minline-int-divide-max-throughput -+@opindex minline-int-divide-max-throughput -+Generate code for inline divides of integer values -+using the maximum throughput algorithm. -+ -+@item -minline-sqrt-min-latency -+@opindex minline-sqrt-min-latency -+Generate code for inline square roots -+using the minimum latency algorithm. -+ -+@item -minline-sqrt-max-throughput -+@opindex minline-sqrt-max-throughput -+Generate code for inline square roots -+using the maximum throughput algorithm. -+ -+@item -mno-dwarf2-asm -+@itemx -mdwarf2-asm -+@opindex mno-dwarf2-asm -+@opindex mdwarf2-asm -+Don't (or do) generate assembler code for the DWARF2 line number debugging -+info. This may be useful when not using the GNU assembler. -+ -+@item -mearly-stop-bits -+@itemx -mno-early-stop-bits -+@opindex mearly-stop-bits -+@opindex mno-early-stop-bits -+Allow stop bits to be placed earlier than immediately preceding the -+instruction that triggered the stop bit. This can improve instruction -+scheduling, but does not always do so. -+ -+@item -mfixed-range=@var{register-range} -+@opindex mfixed-range -+Generate code treating the given register range as fixed registers. -+A fixed register is one that the register allocator can not use. This is -+useful when compiling kernel code. A register range is specified as -+two registers separated by a dash. Multiple register ranges can be -+specified separated by a comma. -+ -+@item -mtls-size=@var{tls-size} -+@opindex mtls-size -+Specify bit size of immediate TLS offsets. Valid values are 14, 22, and -+64. -+ -+@item -mtune=@var{cpu-type} -+@opindex mtune -+Tune the instruction scheduling for a particular CPU, Valid values are -+itanium, itanium1, merced, itanium2, and mckinley. -+ -+@item -mt -+@itemx -pthread -+@opindex mt -+@opindex pthread -+Add support for multithreading using the POSIX threads library. This -+option sets flags for both the preprocessor and linker. It does -+not affect the thread safety of object code produced by the compiler or -+that of libraries supplied with it. These are HP-UX specific flags. -+ -+@item -milp32 -+@itemx -mlp64 -+@opindex milp32 -+@opindex mlp64 -+Generate code for a 32-bit or 64-bit environment. -+The 32-bit environment sets int, long and pointer to 32 bits. -+The 64-bit environment sets int to 32 bits and long and pointer -+to 64 bits. These are HP-UX specific flags. -+ -+@item -mno-sched-br-data-spec -+@itemx -msched-br-data-spec -+@opindex mno-sched-br-data-spec -+@opindex msched-br-data-spec -+(Dis/En)able data speculative scheduling before reload. -+This will result in generation of the ld.a instructions and -+the corresponding check instructions (ld.c / chk.a). -+The default is 'disable'. -+ -+@item -msched-ar-data-spec -+@itemx -mno-sched-ar-data-spec -+@opindex msched-ar-data-spec -+@opindex mno-sched-ar-data-spec -+(En/Dis)able data speculative scheduling after reload. -+This will result in generation of the ld.a instructions and -+the corresponding check instructions (ld.c / chk.a). -+The default is 'enable'. -+ -+@item -mno-sched-control-spec -+@itemx -msched-control-spec -+@opindex mno-sched-control-spec -+@opindex msched-control-spec -+(Dis/En)able control speculative scheduling. This feature is -+available only during region scheduling (i.e.@: before reload). -+This will result in generation of the ld.s instructions and -+the corresponding check instructions chk.s . -+The default is 'disable'. -+ -+@item -msched-br-in-data-spec -+@itemx -mno-sched-br-in-data-spec -+@opindex msched-br-in-data-spec -+@opindex mno-sched-br-in-data-spec -+(En/Dis)able speculative scheduling of the instructions that -+are dependent on the data speculative loads before reload. -+This is effective only with @option{-msched-br-data-spec} enabled. -+The default is 'enable'. -+ -+@item -msched-ar-in-data-spec -+@itemx -mno-sched-ar-in-data-spec -+@opindex msched-ar-in-data-spec -+@opindex mno-sched-ar-in-data-spec -+(En/Dis)able speculative scheduling of the instructions that -+are dependent on the data speculative loads after reload. -+This is effective only with @option{-msched-ar-data-spec} enabled. -+The default is 'enable'. -+ -+@item -msched-in-control-spec -+@itemx -mno-sched-in-control-spec -+@opindex msched-in-control-spec -+@opindex mno-sched-in-control-spec -+(En/Dis)able speculative scheduling of the instructions that -+are dependent on the control speculative loads. -+This is effective only with @option{-msched-control-spec} enabled. -+The default is 'enable'. -+ -+@item -msched-ldc -+@itemx -mno-sched-ldc -+@opindex msched-ldc -+@opindex mno-sched-ldc -+(En/Dis)able use of simple data speculation checks ld.c . -+If disabled, only chk.a instructions will be emitted to check -+data speculative loads. -+The default is 'enable'. -+ -+@item -mno-sched-control-ldc -+@itemx -msched-control-ldc -+@opindex mno-sched-control-ldc -+@opindex msched-control-ldc -+(Dis/En)able use of ld.c instructions to check control speculative loads. -+If enabled, in case of control speculative load with no speculatively -+scheduled dependent instructions this load will be emitted as ld.sa and -+ld.c will be used to check it. -+The default is 'disable'. -+ -+@item -mno-sched-spec-verbose -+@itemx -msched-spec-verbose -+@opindex mno-sched-spec-verbose -+@opindex msched-spec-verbose -+(Dis/En)able printing of the information about speculative motions. -+ -+@item -mno-sched-prefer-non-data-spec-insns -+@itemx -msched-prefer-non-data-spec-insns -+@opindex mno-sched-prefer-non-data-spec-insns -+@opindex msched-prefer-non-data-spec-insns -+If enabled, data speculative instructions will be chosen for schedule -+only if there are no other choices at the moment. This will make -+the use of the data speculation much more conservative. -+The default is 'disable'. -+ -+@item -mno-sched-prefer-non-control-spec-insns -+@itemx -msched-prefer-non-control-spec-insns -+@opindex mno-sched-prefer-non-control-spec-insns -+@opindex msched-prefer-non-control-spec-insns -+If enabled, control speculative instructions will be chosen for schedule -+only if there are no other choices at the moment. This will make -+the use of the control speculation much more conservative. -+The default is 'disable'. -+ -+@item -mno-sched-count-spec-in-critical-path -+@itemx -msched-count-spec-in-critical-path -+@opindex mno-sched-count-spec-in-critical-path -+@opindex msched-count-spec-in-critical-path -+If enabled, speculative dependencies will be considered during -+computation of the instructions priorities. This will make the use of the -+speculation a bit more conservative. -+The default is 'disable'. -+ -+@end table -+ -+@node M32C Options -+@subsection M32C Options -+@cindex M32C options -+ -+@table @gcctabopt -+@item -mcpu=@var{name} -+@opindex mcpu= -+Select the CPU for which code is generated. @var{name} may be one of -+@samp{r8c} for the R8C/Tiny series, @samp{m16c} for the M16C (up to -+/60) series, @samp{m32cm} for the M16C/80 series, or @samp{m32c} for -+the M32C/80 series. -+ -+@item -msim -+@opindex msim -+Specifies that the program will be run on the simulator. This causes -+an alternate runtime library to be linked in which supports, for -+example, file I/O@. You must not use this option when generating -+programs that will run on real hardware; you must provide your own -+runtime library for whatever I/O functions are needed. -+ -+@item -memregs=@var{number} -+@opindex memregs= -+Specifies the number of memory-based pseudo-registers GCC will use -+during code generation. These pseudo-registers will be used like real -+registers, so there is a tradeoff between GCC's ability to fit the -+code into available registers, and the performance penalty of using -+memory instead of registers. Note that all modules in a program must -+be compiled with the same value for this option. Because of that, you -+must not use this option with the default runtime libraries gcc -+builds. -+ -+@end table -+ -+@node M32R/D Options -+@subsection M32R/D Options -+@cindex M32R/D options -+ -+These @option{-m} options are defined for Renesas M32R/D architectures: -+ -+@table @gcctabopt -+@item -m32r2 -+@opindex m32r2 -+Generate code for the M32R/2@. -+ -+@item -m32rx -+@opindex m32rx -+Generate code for the M32R/X@. -+ -+@item -m32r -+@opindex m32r -+Generate code for the M32R@. This is the default. -+ -+@item -mmodel=small -+@opindex mmodel=small -+Assume all objects live in the lower 16MB of memory (so that their addresses -+can be loaded with the @code{ld24} instruction), and assume all subroutines -+are reachable with the @code{bl} instruction. -+This is the default. -+ -+The addressability of a particular object can be set with the -+@code{model} attribute. -+ -+@item -mmodel=medium -+@opindex mmodel=medium -+Assume objects may be anywhere in the 32-bit address space (the compiler -+will generate @code{seth/add3} instructions to load their addresses), and -+assume all subroutines are reachable with the @code{bl} instruction. -+ -+@item -mmodel=large -+@opindex mmodel=large -+Assume objects may be anywhere in the 32-bit address space (the compiler -+will generate @code{seth/add3} instructions to load their addresses), and -+assume subroutines may not be reachable with the @code{bl} instruction -+(the compiler will generate the much slower @code{seth/add3/jl} -+instruction sequence). -+ -+@item -msdata=none -+@opindex msdata=none -+Disable use of the small data area. Variables will be put into -+one of @samp{.data}, @samp{bss}, or @samp{.rodata} (unless the -+@code{section} attribute has been specified). -+This is the default. -+ -+The small data area consists of sections @samp{.sdata} and @samp{.sbss}. -+Objects may be explicitly put in the small data area with the -+@code{section} attribute using one of these sections. -+ -+@item -msdata=sdata -+@opindex msdata=sdata -+Put small global and static data in the small data area, but do not -+generate special code to reference them. -+ -+@item -msdata=use -+@opindex msdata=use -+Put small global and static data in the small data area, and generate -+special instructions to reference them. -+ -+@item -G @var{num} -+@opindex G -+@cindex smaller data references -+Put global and static objects less than or equal to @var{num} bytes -+into the small data or bss sections instead of the normal data or bss -+sections. The default value of @var{num} is 8. -+The @option{-msdata} option must be set to one of @samp{sdata} or @samp{use} -+for this option to have any effect. -+ -+All modules should be compiled with the same @option{-G @var{num}} value. -+Compiling with different values of @var{num} may or may not work; if it -+doesn't the linker will give an error message---incorrect code will not be -+generated. -+ -+@item -mdebug -+@opindex mdebug -+Makes the M32R specific code in the compiler display some statistics -+that might help in debugging programs. -+ -+@item -malign-loops -+@opindex malign-loops -+Align all loops to a 32-byte boundary. -+ -+@item -mno-align-loops -+@opindex mno-align-loops -+Do not enforce a 32-byte alignment for loops. This is the default. -+ -+@item -missue-rate=@var{number} -+@opindex missue-rate=@var{number} -+Issue @var{number} instructions per cycle. @var{number} can only be 1 -+or 2. -+ -+@item -mbranch-cost=@var{number} -+@opindex mbranch-cost=@var{number} -+@var{number} can only be 1 or 2. If it is 1 then branches will be -+preferred over conditional code, if it is 2, then the opposite will -+apply. -+ -+@item -mflush-trap=@var{number} -+@opindex mflush-trap=@var{number} -+Specifies the trap number to use to flush the cache. The default is -+12. Valid numbers are between 0 and 15 inclusive. -+ -+@item -mno-flush-trap -+@opindex mno-flush-trap -+Specifies that the cache cannot be flushed by using a trap. -+ -+@item -mflush-func=@var{name} -+@opindex mflush-func=@var{name} -+Specifies the name of the operating system function to call to flush -+the cache. The default is @emph{_flush_cache}, but a function call -+will only be used if a trap is not available. -+ -+@item -mno-flush-func -+@opindex mno-flush-func -+Indicates that there is no OS function for flushing the cache. -+ -+@end table -+ -+@node M680x0 Options -+@subsection M680x0 Options -+@cindex M680x0 options -+ -+These are the @samp{-m} options defined for M680x0 and ColdFire processors. -+The default settings depend on which architecture was selected when -+the compiler was configured; the defaults for the most common choices -+are given below. -+ -+@table @gcctabopt -+@item -march=@var{arch} -+@opindex march -+Generate code for a specific M680x0 or ColdFire instruction set -+architecture. Permissible values of @var{arch} for M680x0 -+architectures are: @samp{68000}, @samp{68010}, @samp{68020}, -+@samp{68030}, @samp{68040}, @samp{68060} and @samp{cpu32}. ColdFire -+architectures are selected according to Freescale's ISA classification -+and the permissible values are: @samp{isaa}, @samp{isaaplus}, -+@samp{isab} and @samp{isac}. -+ -+gcc defines a macro @samp{__mcf@var{arch}__} whenever it is generating -+code for a ColdFire target. The @var{arch} in this macro is one of the -+@option{-march} arguments given above. -+ -+When used together, @option{-march} and @option{-mtune} select code -+that runs on a family of similar processors but that is optimized -+for a particular microarchitecture. -+ -+@item -mcpu=@var{cpu} -+@opindex mcpu -+Generate code for a specific M680x0 or ColdFire processor. -+The M680x0 @var{cpu}s are: @samp{68000}, @samp{68010}, @samp{68020}, -+@samp{68030}, @samp{68040}, @samp{68060}, @samp{68302}, @samp{68332} -+and @samp{cpu32}. The ColdFire @var{cpu}s are given by the table -+below, which also classifies the CPUs into families: -+ -+@multitable @columnfractions 0.20 0.80 -+@item @strong{Family} @tab @strong{@samp{-mcpu} arguments} -+@item @samp{51qe} @tab @samp{51qe} -+@item @samp{5206} @tab @samp{5202} @samp{5204} @samp{5206} -+@item @samp{5206e} @tab @samp{5206e} -+@item @samp{5208} @tab @samp{5207} @samp{5208} -+@item @samp{5211a} @tab @samp{5210a} @samp{5211a} -+@item @samp{5213} @tab @samp{5211} @samp{5212} @samp{5213} -+@item @samp{5216} @tab @samp{5214} @samp{5216} -+@item @samp{52235} @tab @samp{52230} @samp{52231} @samp{52232} @samp{52233} @samp{52234} @samp{52235} -+@item @samp{5225} @tab @samp{5224} @samp{5225} -+@item @samp{5235} @tab @samp{5232} @samp{5233} @samp{5234} @samp{5235} @samp{523x} -+@item @samp{5249} @tab @samp{5249} -+@item @samp{5250} @tab @samp{5250} -+@item @samp{5271} @tab @samp{5270} @samp{5271} -+@item @samp{5272} @tab @samp{5272} -+@item @samp{5275} @tab @samp{5274} @samp{5275} -+@item @samp{5282} @tab @samp{5280} @samp{5281} @samp{5282} @samp{528x} -+@item @samp{5307} @tab @samp{5307} -+@item @samp{5329} @tab @samp{5327} @samp{5328} @samp{5329} @samp{532x} -+@item @samp{5373} @tab @samp{5372} @samp{5373} @samp{537x} -+@item @samp{5407} @tab @samp{5407} -+@item @samp{5475} @tab @samp{5470} @samp{5471} @samp{5472} @samp{5473} @samp{5474} @samp{5475} @samp{547x} @samp{5480} @samp{5481} @samp{5482} @samp{5483} @samp{5484} @samp{5485} -+@end multitable -+ -+@option{-mcpu=@var{cpu}} overrides @option{-march=@var{arch}} if -+@var{arch} is compatible with @var{cpu}. Other combinations of -+@option{-mcpu} and @option{-march} are rejected. -+ -+gcc defines the macro @samp{__mcf_cpu_@var{cpu}} when ColdFire target -+@var{cpu} is selected. It also defines @samp{__mcf_family_@var{family}}, -+where the value of @var{family} is given by the table above. -+ -+@item -mtune=@var{tune} -+@opindex mtune -+Tune the code for a particular microarchitecture, within the -+constraints set by @option{-march} and @option{-mcpu}. -+The M680x0 microarchitectures are: @samp{68000}, @samp{68010}, -+@samp{68020}, @samp{68030}, @samp{68040}, @samp{68060} -+and @samp{cpu32}. The ColdFire microarchitectures -+are: @samp{cfv1}, @samp{cfv2}, @samp{cfv3}, @samp{cfv4} and @samp{cfv4e}. -+ -+You can also use @option{-mtune=68020-40} for code that needs -+to run relatively well on 68020, 68030 and 68040 targets. -+@option{-mtune=68020-60} is similar but includes 68060 targets -+as well. These two options select the same tuning decisions as -+@option{-m68020-40} and @option{-m68020-60} respectively. -+ -+gcc defines the macros @samp{__mc@var{arch}} and @samp{__mc@var{arch}__} -+when tuning for 680x0 architecture @var{arch}. It also defines -+@samp{mc@var{arch}} unless either @option{-ansi} or a non-GNU @option{-std} -+option is used. If gcc is tuning for a range of architectures, -+as selected by @option{-mtune=68020-40} or @option{-mtune=68020-60}, -+it defines the macros for every architecture in the range. -+ -+gcc also defines the macro @samp{__m@var{uarch}__} when tuning for -+ColdFire microarchitecture @var{uarch}, where @var{uarch} is one -+of the arguments given above. -+ -+@item -m68000 -+@itemx -mc68000 -+@opindex m68000 -+@opindex mc68000 -+Generate output for a 68000. This is the default -+when the compiler is configured for 68000-based systems. -+It is equivalent to @option{-march=68000}. -+ -+Use this option for microcontrollers with a 68000 or EC000 core, -+including the 68008, 68302, 68306, 68307, 68322, 68328 and 68356. -+ -+@item -m68010 -+@opindex m68010 -+Generate output for a 68010. This is the default -+when the compiler is configured for 68010-based systems. -+It is equivalent to @option{-march=68010}. -+ -+@item -m68020 -+@itemx -mc68020 -+@opindex m68020 -+@opindex mc68020 -+Generate output for a 68020. This is the default -+when the compiler is configured for 68020-based systems. -+It is equivalent to @option{-march=68020}. -+ -+@item -m68030 -+@opindex m68030 -+Generate output for a 68030. This is the default when the compiler is -+configured for 68030-based systems. It is equivalent to -+@option{-march=68030}. -+ -+@item -m68040 -+@opindex m68040 -+Generate output for a 68040. This is the default when the compiler is -+configured for 68040-based systems. It is equivalent to -+@option{-march=68040}. -+ -+This option inhibits the use of 68881/68882 instructions that have to be -+emulated by software on the 68040. Use this option if your 68040 does not -+have code to emulate those instructions. -+ -+@item -m68060 -+@opindex m68060 -+Generate output for a 68060. This is the default when the compiler is -+configured for 68060-based systems. It is equivalent to -+@option{-march=68060}. -+ -+This option inhibits the use of 68020 and 68881/68882 instructions that -+have to be emulated by software on the 68060. Use this option if your 68060 -+does not have code to emulate those instructions. -+ -+@item -mcpu32 -+@opindex mcpu32 -+Generate output for a CPU32. This is the default -+when the compiler is configured for CPU32-based systems. -+It is equivalent to @option{-march=cpu32}. -+ -+Use this option for microcontrollers with a -+CPU32 or CPU32+ core, including the 68330, 68331, 68332, 68333, 68334, -+68336, 68340, 68341, 68349 and 68360. -+ -+@item -m5200 -+@opindex m5200 -+Generate output for a 520X ColdFire CPU@. This is the default -+when the compiler is configured for 520X-based systems. -+It is equivalent to @option{-mcpu=5206}, and is now deprecated -+in favor of that option. -+ -+Use this option for microcontroller with a 5200 core, including -+the MCF5202, MCF5203, MCF5204 and MCF5206. -+ -+@item -m5206e -+@opindex m5206e -+Generate output for a 5206e ColdFire CPU@. The option is now -+deprecated in favor of the equivalent @option{-mcpu=5206e}. -+ -+@item -m528x -+@opindex m528x -+Generate output for a member of the ColdFire 528X family. -+The option is now deprecated in favor of the equivalent -+@option{-mcpu=528x}. -+ -+@item -m5307 -+@opindex m5307 -+Generate output for a ColdFire 5307 CPU@. The option is now deprecated -+in favor of the equivalent @option{-mcpu=5307}. -+ -+@item -m5407 -+@opindex m5407 -+Generate output for a ColdFire 5407 CPU@. The option is now deprecated -+in favor of the equivalent @option{-mcpu=5407}. -+ -+@item -mcfv4e -+@opindex mcfv4e -+Generate output for a ColdFire V4e family CPU (e.g.@: 547x/548x). -+This includes use of hardware floating point instructions. -+The option is equivalent to @option{-mcpu=547x}, and is now -+deprecated in favor of that option. -+ -+@item -m68020-40 -+@opindex m68020-40 -+Generate output for a 68040, without using any of the new instructions. -+This results in code which can run relatively efficiently on either a -+68020/68881 or a 68030 or a 68040. The generated code does use the -+68881 instructions that are emulated on the 68040. -+ -+The option is equivalent to @option{-march=68020} @option{-mtune=68020-40}. -+ -+@item -m68020-60 -+@opindex m68020-60 -+Generate output for a 68060, without using any of the new instructions. -+This results in code which can run relatively efficiently on either a -+68020/68881 or a 68030 or a 68040. The generated code does use the -+68881 instructions that are emulated on the 68060. -+ -+The option is equivalent to @option{-march=68020} @option{-mtune=68020-60}. -+ -+@item -mhard-float -+@itemx -m68881 -+@opindex mhard-float -+@opindex m68881 -+Generate floating-point instructions. This is the default for 68020 -+and above, and for ColdFire devices that have an FPU@. It defines the -+macro @samp{__HAVE_68881__} on M680x0 targets and @samp{__mcffpu__} -+on ColdFire targets. -+ -+@item -msoft-float -+@opindex msoft-float -+Do not generate floating-point instructions; use library calls instead. -+This is the default for 68000, 68010, and 68832 targets. It is also -+the default for ColdFire devices that have no FPU. -+ -+@item -mdiv -+@itemx -mno-div -+@opindex mdiv -+@opindex mno-div -+Generate (do not generate) ColdFire hardware divide and remainder -+instructions. If @option{-march} is used without @option{-mcpu}, -+the default is ``on'' for ColdFire architectures and ``off'' for M680x0 -+architectures. Otherwise, the default is taken from the target CPU -+(either the default CPU, or the one specified by @option{-mcpu}). For -+example, the default is ``off'' for @option{-mcpu=5206} and ``on'' for -+@option{-mcpu=5206e}. -+ -+gcc defines the macro @samp{__mcfhwdiv__} when this option is enabled. -+ -+@item -mshort -+@opindex mshort -+Consider type @code{int} to be 16 bits wide, like @code{short int}. -+Additionally, parameters passed on the stack are also aligned to a -+16-bit boundary even on targets whose API mandates promotion to 32-bit. -+ -+@item -mno-short -+@opindex mno-short -+Do not consider type @code{int} to be 16 bits wide. This is the default. -+ -+@item -mnobitfield -+@itemx -mno-bitfield -+@opindex mnobitfield -+@opindex mno-bitfield -+Do not use the bit-field instructions. The @option{-m68000}, @option{-mcpu32} -+and @option{-m5200} options imply @w{@option{-mnobitfield}}. -+ -+@item -mbitfield -+@opindex mbitfield -+Do use the bit-field instructions. The @option{-m68020} option implies -+@option{-mbitfield}. This is the default if you use a configuration -+designed for a 68020. -+ -+@item -mrtd -+@opindex mrtd -+Use a different function-calling convention, in which functions -+that take a fixed number of arguments return with the @code{rtd} -+instruction, which pops their arguments while returning. This -+saves one instruction in the caller since there is no need to pop -+the arguments there. -+ -+This calling convention is incompatible with the one normally -+used on Unix, so you cannot use it if you need to call libraries -+compiled with the Unix compiler. -+ -+Also, you must provide function prototypes for all functions that -+take variable numbers of arguments (including @code{printf}); -+otherwise incorrect code will be generated for calls to those -+functions. -+ -+In addition, seriously incorrect code will result if you call a -+function with too many arguments. (Normally, extra arguments are -+harmlessly ignored.) -+ -+The @code{rtd} instruction is supported by the 68010, 68020, 68030, -+68040, 68060 and CPU32 processors, but not by the 68000 or 5200. -+ -+@item -mno-rtd -+@opindex mno-rtd -+Do not use the calling conventions selected by @option{-mrtd}. -+This is the default. -+ -+@item -malign-int -+@itemx -mno-align-int -+@opindex malign-int -+@opindex mno-align-int -+Control whether GCC aligns @code{int}, @code{long}, @code{long long}, -+@code{float}, @code{double}, and @code{long double} variables on a 32-bit -+boundary (@option{-malign-int}) or a 16-bit boundary (@option{-mno-align-int}). -+Aligning variables on 32-bit boundaries produces code that runs somewhat -+faster on processors with 32-bit busses at the expense of more memory. -+ -+@strong{Warning:} if you use the @option{-malign-int} switch, GCC will -+align structures containing the above types differently than -+most published application binary interface specifications for the m68k. -+ -+@item -mpcrel -+@opindex mpcrel -+Use the pc-relative addressing mode of the 68000 directly, instead of -+using a global offset table. At present, this option implies @option{-fpic}, -+allowing at most a 16-bit offset for pc-relative addressing. @option{-fPIC} is -+not presently supported with @option{-mpcrel}, though this could be supported for -+68020 and higher processors. -+ -+@item -mno-strict-align -+@itemx -mstrict-align -+@opindex mno-strict-align -+@opindex mstrict-align -+Do not (do) assume that unaligned memory references will be handled by -+the system. -+ -+@item -msep-data -+Generate code that allows the data segment to be located in a different -+area of memory from the text segment. This allows for execute in place in -+an environment without virtual memory management. This option implies -+@option{-fPIC}. -+ -+@item -mno-sep-data -+Generate code that assumes that the data segment follows the text segment. -+This is the default. -+ -+@item -mid-shared-library -+Generate code that supports shared libraries via the library ID method. -+This allows for execute in place and shared libraries in an environment -+without virtual memory management. This option implies @option{-fPIC}. -+ -+@item -mno-id-shared-library -+Generate code that doesn't assume ID based shared libraries are being used. -+This is the default. -+ -+@item -mshared-library-id=n -+Specified the identification number of the ID based shared library being -+compiled. Specifying a value of 0 will generate more compact code, specifying -+other values will force the allocation of that number to the current -+library but is no more space or time efficient than omitting this option. -+ -+@item -mxgot -+@itemx -mno-xgot -+@opindex mxgot -+@opindex mno-xgot -+When generating position-independent code for ColdFire, generate code -+that works if the GOT has more than 8192 entries. This code is -+larger and slower than code generated without this option. On M680x0 -+processors, this option is not needed; @option{-fPIC} suffices. -+ -+GCC normally uses a single instruction to load values from the GOT@. -+While this is relatively efficient, it only works if the GOT -+is smaller than about 64k. Anything larger causes the linker -+to report an error such as: -+ -+@cindex relocation truncated to fit (ColdFire) -+@smallexample -+relocation truncated to fit: R_68K_GOT16O foobar -+@end smallexample -+ -+If this happens, you should recompile your code with @option{-mxgot}. -+It should then work with very large GOTs. However, code generated with -+@option{-mxgot} is less efficient, since it takes 4 instructions to fetch -+the value of a global symbol. -+ -+Note that some linkers, including newer versions of the GNU linker, -+can create multiple GOTs and sort GOT entries. If you have such a linker, -+you should only need to use @option{-mxgot} when compiling a single -+object file that accesses more than 8192 GOT entries. Very few do. -+ -+These options have no effect unless GCC is generating -+position-independent code. -+ -+@end table -+ -+@node M68hc1x Options -+@subsection M68hc1x Options -+@cindex M68hc1x options -+ -+These are the @samp{-m} options defined for the 68hc11 and 68hc12 -+microcontrollers. The default values for these options depends on -+which style of microcontroller was selected when the compiler was configured; -+the defaults for the most common choices are given below. -+ -+@table @gcctabopt -+@item -m6811 -+@itemx -m68hc11 -+@opindex m6811 -+@opindex m68hc11 -+Generate output for a 68HC11. This is the default -+when the compiler is configured for 68HC11-based systems. -+ -+@item -m6812 -+@itemx -m68hc12 -+@opindex m6812 -+@opindex m68hc12 -+Generate output for a 68HC12. This is the default -+when the compiler is configured for 68HC12-based systems. -+ -+@item -m68S12 -+@itemx -m68hcs12 -+@opindex m68S12 -+@opindex m68hcs12 -+Generate output for a 68HCS12. -+ -+@item -mauto-incdec -+@opindex mauto-incdec -+Enable the use of 68HC12 pre and post auto-increment and auto-decrement -+addressing modes. -+ -+@item -minmax -+@itemx -nominmax -+@opindex minmax -+@opindex mnominmax -+Enable the use of 68HC12 min and max instructions. -+ -+@item -mlong-calls -+@itemx -mno-long-calls -+@opindex mlong-calls -+@opindex mno-long-calls -+Treat all calls as being far away (near). If calls are assumed to be -+far away, the compiler will use the @code{call} instruction to -+call a function and the @code{rtc} instruction for returning. -+ -+@item -mshort -+@opindex mshort -+Consider type @code{int} to be 16 bits wide, like @code{short int}. -+ -+@item -msoft-reg-count=@var{count} -+@opindex msoft-reg-count -+Specify the number of pseudo-soft registers which are used for the -+code generation. The maximum number is 32. Using more pseudo-soft -+register may or may not result in better code depending on the program. -+The default is 4 for 68HC11 and 2 for 68HC12. -+ -+@end table -+ -+@node MCore Options -+@subsection MCore Options -+@cindex MCore options -+ -+These are the @samp{-m} options defined for the Motorola M*Core -+processors. -+ -+@table @gcctabopt -+ -+@item -mhardlit -+@itemx -mno-hardlit -+@opindex mhardlit -+@opindex mno-hardlit -+Inline constants into the code stream if it can be done in two -+instructions or less. -+ -+@item -mdiv -+@itemx -mno-div -+@opindex mdiv -+@opindex mno-div -+Use the divide instruction. (Enabled by default). -+ -+@item -mrelax-immediate -+@itemx -mno-relax-immediate -+@opindex mrelax-immediate -+@opindex mno-relax-immediate -+Allow arbitrary sized immediates in bit operations. -+ -+@item -mwide-bitfields -+@itemx -mno-wide-bitfields -+@opindex mwide-bitfields -+@opindex mno-wide-bitfields -+Always treat bit-fields as int-sized. -+ -+@item -m4byte-functions -+@itemx -mno-4byte-functions -+@opindex m4byte-functions -+@opindex mno-4byte-functions -+Force all functions to be aligned to a four byte boundary. -+ -+@item -mcallgraph-data -+@itemx -mno-callgraph-data -+@opindex mcallgraph-data -+@opindex mno-callgraph-data -+Emit callgraph information. -+ -+@item -mslow-bytes -+@itemx -mno-slow-bytes -+@opindex mslow-bytes -+@opindex mno-slow-bytes -+Prefer word access when reading byte quantities. -+ -+@item -mlittle-endian -+@itemx -mbig-endian -+@opindex mlittle-endian -+@opindex mbig-endian -+Generate code for a little endian target. -+ -+@item -m210 -+@itemx -m340 -+@opindex m210 -+@opindex m340 -+Generate code for the 210 processor. -+ -+@item -mno-lsim -+@opindex no-lsim -+Assume that run-time support has been provided and so omit the -+simulator library (@file{libsim.a)} from the linker command line. -+ -+@item -mstack-increment=@var{size} -+@opindex mstack-increment -+Set the maximum amount for a single stack increment operation. Large -+values can increase the speed of programs which contain functions -+that need a large amount of stack space, but they can also trigger a -+segmentation fault if the stack is extended too much. The default -+value is 0x1000. -+ -+@end table -+ -+@node MIPS Options -+@subsection MIPS Options -+@cindex MIPS options -+ -+@table @gcctabopt -+ -+@item -EB -+@opindex EB -+Generate big-endian code. -+ -+@item -EL -+@opindex EL -+Generate little-endian code. This is the default for @samp{mips*el-*-*} -+configurations. -+ -+@item -march=@var{arch} -+@opindex march -+Generate code that will run on @var{arch}, which can be the name of a -+generic MIPS ISA, or the name of a particular processor. -+The ISA names are: -+@samp{mips1}, @samp{mips2}, @samp{mips3}, @samp{mips4}, -+@samp{mips32}, @samp{mips32r2}, @samp{mips64} and @samp{mips64r2}. -+The processor names are: -+@samp{4kc}, @samp{4km}, @samp{4kp}, @samp{4ksc}, -+@samp{4kec}, @samp{4kem}, @samp{4kep}, @samp{4ksd}, -+@samp{5kc}, @samp{5kf}, -+@samp{20kc}, -+@samp{24kc}, @samp{24kf2_1}, @samp{24kf1_1}, -+@samp{24kec}, @samp{24kef2_1}, @samp{24kef1_1}, -+@samp{34kc}, @samp{34kf2_1}, @samp{34kf1_1}, -+@samp{74kc}, @samp{74kf2_1}, @samp{74kf1_1}, @samp{74kf3_2}, -+@samp{loongson2e}, @samp{loongson2f}, -+@samp{m4k}, -+@samp{octeon}, -+@samp{orion}, -+@samp{r2000}, @samp{r3000}, @samp{r3900}, @samp{r4000}, @samp{r4400}, -+@samp{r4600}, @samp{r4650}, @samp{r6000}, @samp{r8000}, -+@samp{rm7000}, @samp{rm9000}, -+@samp{r10000}, @samp{r12000}, @samp{r14000}, @samp{r16000}, -+@samp{sb1}, -+@samp{sr71000}, -+@samp{vr4100}, @samp{vr4111}, @samp{vr4120}, @samp{vr4130}, @samp{vr4300}, -+@samp{vr5000}, @samp{vr5400}, @samp{vr5500} -+and @samp{xlr}. -+The special value @samp{from-abi} selects the -+most compatible architecture for the selected ABI (that is, -+@samp{mips1} for 32-bit ABIs and @samp{mips3} for 64-bit ABIs)@. -+ -+Native Linux/GNU toolchains also support the value @samp{native}, -+which selects the best architecture option for the host processor. -+@option{-march=native} has no effect if GCC does not recognize -+the processor. -+ -+In processor names, a final @samp{000} can be abbreviated as @samp{k} -+(for example, @samp{-march=r2k}). Prefixes are optional, and -+@samp{vr} may be written @samp{r}. -+ -+Names of the form @samp{@var{n}f2_1} refer to processors with -+FPUs clocked at half the rate of the core, names of the form -+@samp{@var{n}f1_1} refer to processors with FPUs clocked at the same -+rate as the core, and names of the form @samp{@var{n}f3_2} refer to -+processors with FPUs clocked a ratio of 3:2 with respect to the core. -+For compatibility reasons, @samp{@var{n}f} is accepted as a synonym -+for @samp{@var{n}f2_1} while @samp{@var{n}x} and @samp{@var{b}fx} are -+accepted as synonyms for @samp{@var{n}f1_1}. -+ -+GCC defines two macros based on the value of this option. The first -+is @samp{_MIPS_ARCH}, which gives the name of target architecture, as -+a string. The second has the form @samp{_MIPS_ARCH_@var{foo}}, -+where @var{foo} is the capitalized value of @samp{_MIPS_ARCH}@. -+For example, @samp{-march=r2000} will set @samp{_MIPS_ARCH} -+to @samp{"r2000"} and define the macro @samp{_MIPS_ARCH_R2000}. -+ -+Note that the @samp{_MIPS_ARCH} macro uses the processor names given -+above. In other words, it will have the full prefix and will not -+abbreviate @samp{000} as @samp{k}. In the case of @samp{from-abi}, -+the macro names the resolved architecture (either @samp{"mips1"} or -+@samp{"mips3"}). It names the default architecture when no -+@option{-march} option is given. -+ -+@item -mtune=@var{arch} -+@opindex mtune -+Optimize for @var{arch}. Among other things, this option controls -+the way instructions are scheduled, and the perceived cost of arithmetic -+operations. The list of @var{arch} values is the same as for -+@option{-march}. -+ -+When this option is not used, GCC will optimize for the processor -+specified by @option{-march}. By using @option{-march} and -+@option{-mtune} together, it is possible to generate code that will -+run on a family of processors, but optimize the code for one -+particular member of that family. -+ -+@samp{-mtune} defines the macros @samp{_MIPS_TUNE} and -+@samp{_MIPS_TUNE_@var{foo}}, which work in the same way as the -+@samp{-march} ones described above. -+ -+@item -mips1 -+@opindex mips1 -+Equivalent to @samp{-march=mips1}. -+ -+@item -mips2 -+@opindex mips2 -+Equivalent to @samp{-march=mips2}. -+ -+@item -mips3 -+@opindex mips3 -+Equivalent to @samp{-march=mips3}. -+ -+@item -mips4 -+@opindex mips4 -+Equivalent to @samp{-march=mips4}. -+ -+@item -mips32 -+@opindex mips32 -+Equivalent to @samp{-march=mips32}. -+ -+@item -mips32r2 -+@opindex mips32r2 -+Equivalent to @samp{-march=mips32r2}. -+ -+@item -mips64 -+@opindex mips64 -+Equivalent to @samp{-march=mips64}. -+ -+@item -mips64r2 -+@opindex mips64r2 -+Equivalent to @samp{-march=mips64r2}. -+ -+@item -mips16 -+@itemx -mno-mips16 -+@opindex mips16 -+@opindex mno-mips16 -+Generate (do not generate) MIPS16 code. If GCC is targetting a -+MIPS32 or MIPS64 architecture, it will make use of the MIPS16e ASE@. -+ -+MIPS16 code generation can also be controlled on a per-function basis -+by means of @code{mips16} and @code{nomips16} attributes. -+@xref{Function Attributes}, for more information. -+ -+@item -mflip-mips16 -+@opindex mflip-mips16 -+Generate MIPS16 code on alternating functions. This option is provided -+for regression testing of mixed MIPS16/non-MIPS16 code generation, and is -+not intended for ordinary use in compiling user code. -+ -+@item -minterlink-mips16 -+@itemx -mno-interlink-mips16 -+@opindex minterlink-mips16 -+@opindex mno-interlink-mips16 -+Require (do not require) that non-MIPS16 code be link-compatible with -+MIPS16 code. -+ -+For example, non-MIPS16 code cannot jump directly to MIPS16 code; -+it must either use a call or an indirect jump. @option{-minterlink-mips16} -+therefore disables direct jumps unless GCC knows that the target of the -+jump is not MIPS16. -+ -+@item -mabi=32 -+@itemx -mabi=o64 -+@itemx -mabi=n32 -+@itemx -mabi=64 -+@itemx -mabi=eabi -+@opindex mabi=32 -+@opindex mabi=o64 -+@opindex mabi=n32 -+@opindex mabi=64 -+@opindex mabi=eabi -+Generate code for the given ABI@. -+ -+Note that the EABI has a 32-bit and a 64-bit variant. GCC normally -+generates 64-bit code when you select a 64-bit architecture, but you -+can use @option{-mgp32} to get 32-bit code instead. -+ -+For information about the O64 ABI, see -+@w{@uref{http://gcc.gnu.org/projects/mipso64-abi.html}}. -+ -+GCC supports a variant of the o32 ABI in which floating-point registers -+are 64 rather than 32 bits wide. You can select this combination with -+@option{-mabi=32} @option{-mfp64}. This ABI relies on the @samp{mthc1} -+and @samp{mfhc1} instructions and is therefore only supported for -+MIPS32R2 processors. -+ -+The register assignments for arguments and return values remain the -+same, but each scalar value is passed in a single 64-bit register -+rather than a pair of 32-bit registers. For example, scalar -+floating-point values are returned in @samp{$f0} only, not a -+@samp{$f0}/@samp{$f1} pair. The set of call-saved registers also -+remains the same, but all 64 bits are saved. -+ -+@item -mabicalls -+@itemx -mno-abicalls -+@opindex mabicalls -+@opindex mno-abicalls -+Generate (do not generate) code that is suitable for SVR4-style -+dynamic objects. @option{-mabicalls} is the default for SVR4-based -+systems. -+ -+@item -mshared -+@itemx -mno-shared -+Generate (do not generate) code that is fully position-independent, -+and that can therefore be linked into shared libraries. This option -+only affects @option{-mabicalls}. -+ -+All @option{-mabicalls} code has traditionally been position-independent, -+regardless of options like @option{-fPIC} and @option{-fpic}. However, -+as an extension, the GNU toolchain allows executables to use absolute -+accesses for locally-binding symbols. It can also use shorter GP -+initialization sequences and generate direct calls to locally-defined -+functions. This mode is selected by @option{-mno-shared}. -+ -+@option{-mno-shared} depends on binutils 2.16 or higher and generates -+objects that can only be linked by the GNU linker. However, the option -+does not affect the ABI of the final executable; it only affects the ABI -+of relocatable objects. Using @option{-mno-shared} will generally make -+executables both smaller and quicker. -+ -+@option{-mshared} is the default. -+ -+@item -mplt -+@itemx -mno-plt -+@opindex mplt -+@opindex mno-plt -+Assume (do not assume) that the static and dynamic linkers -+support PLTs and copy relocations. This option only affects -+@samp{-mno-shared -mabicalls}. For the n64 ABI, this option -+has no effect without @samp{-msym32}. -+ -+You can make @option{-mplt} the default by configuring -+GCC with @option{--with-mips-plt}. The default is -+@option{-mno-plt} otherwise. -+ -+@item -mxgot -+@itemx -mno-xgot -+@opindex mxgot -+@opindex mno-xgot -+Lift (do not lift) the usual restrictions on the size of the global -+offset table. -+ -+GCC normally uses a single instruction to load values from the GOT@. -+While this is relatively efficient, it will only work if the GOT -+is smaller than about 64k. Anything larger will cause the linker -+to report an error such as: -+ -+@cindex relocation truncated to fit (MIPS) -+@smallexample -+relocation truncated to fit: R_MIPS_GOT16 foobar -+@end smallexample -+ -+If this happens, you should recompile your code with @option{-mxgot}. -+It should then work with very large GOTs, although it will also be -+less efficient, since it will take three instructions to fetch the -+value of a global symbol. -+ -+Note that some linkers can create multiple GOTs. If you have such a -+linker, you should only need to use @option{-mxgot} when a single object -+file accesses more than 64k's worth of GOT entries. Very few do. -+ -+These options have no effect unless GCC is generating position -+independent code. -+ -+@item -mgp32 -+@opindex mgp32 -+Assume that general-purpose registers are 32 bits wide. -+ -+@item -mgp64 -+@opindex mgp64 -+Assume that general-purpose registers are 64 bits wide. -+ -+@item -mfp32 -+@opindex mfp32 -+Assume that floating-point registers are 32 bits wide. -+ -+@item -mfp64 -+@opindex mfp64 -+Assume that floating-point registers are 64 bits wide. -+ -+@item -mhard-float -+@opindex mhard-float -+Use floating-point coprocessor instructions. -+ -+@item -msoft-float -+@opindex msoft-float -+Do not use floating-point coprocessor instructions. Implement -+floating-point calculations using library calls instead. -+ -+@item -msingle-float -+@opindex msingle-float -+Assume that the floating-point coprocessor only supports single-precision -+operations. -+ -+@item -mdouble-float -+@opindex mdouble-float -+Assume that the floating-point coprocessor supports double-precision -+operations. This is the default. -+ -+@item -mllsc -+@itemx -mno-llsc -+@opindex mllsc -+@opindex mno-llsc -+Use (do not use) @samp{ll}, @samp{sc}, and @samp{sync} instructions to -+implement atomic memory built-in functions. When neither option is -+specified, GCC will use the instructions if the target architecture -+supports them. -+ -+@option{-mllsc} is useful if the runtime environment can emulate the -+instructions and @option{-mno-llsc} can be useful when compiling for -+nonstandard ISAs. You can make either option the default by -+configuring GCC with @option{--with-llsc} and @option{--without-llsc} -+respectively. @option{--with-llsc} is the default for some -+configurations; see the installation documentation for details. -+ -+@item -mdsp -+@itemx -mno-dsp -+@opindex mdsp -+@opindex mno-dsp -+Use (do not use) revision 1 of the MIPS DSP ASE@. -+@xref{MIPS DSP Built-in Functions}. This option defines the -+preprocessor macro @samp{__mips_dsp}. It also defines -+@samp{__mips_dsp_rev} to 1. -+ -+@item -mdspr2 -+@itemx -mno-dspr2 -+@opindex mdspr2 -+@opindex mno-dspr2 -+Use (do not use) revision 2 of the MIPS DSP ASE@. -+@xref{MIPS DSP Built-in Functions}. This option defines the -+preprocessor macros @samp{__mips_dsp} and @samp{__mips_dspr2}. -+It also defines @samp{__mips_dsp_rev} to 2. -+ -+@item -msmartmips -+@itemx -mno-smartmips -+@opindex msmartmips -+@opindex mno-smartmips -+Use (do not use) the MIPS SmartMIPS ASE. -+ -+@item -mpaired-single -+@itemx -mno-paired-single -+@opindex mpaired-single -+@opindex mno-paired-single -+Use (do not use) paired-single floating-point instructions. -+@xref{MIPS Paired-Single Support}. This option requires -+hardware floating-point support to be enabled. -+ -+@item -mdmx -+@itemx -mno-mdmx -+@opindex mdmx -+@opindex mno-mdmx -+Use (do not use) MIPS Digital Media Extension instructions. -+This option can only be used when generating 64-bit code and requires -+hardware floating-point support to be enabled. -+ -+@item -mips3d -+@itemx -mno-mips3d -+@opindex mips3d -+@opindex mno-mips3d -+Use (do not use) the MIPS-3D ASE@. @xref{MIPS-3D Built-in Functions}. -+The option @option{-mips3d} implies @option{-mpaired-single}. -+ -+@item -mmt -+@itemx -mno-mt -+@opindex mmt -+@opindex mno-mt -+Use (do not use) MT Multithreading instructions. -+ -+@item -mlong64 -+@opindex mlong64 -+Force @code{long} types to be 64 bits wide. See @option{-mlong32} for -+an explanation of the default and the way that the pointer size is -+determined. -+ -+@item -mlong32 -+@opindex mlong32 -+Force @code{long}, @code{int}, and pointer types to be 32 bits wide. -+ -+The default size of @code{int}s, @code{long}s and pointers depends on -+the ABI@. All the supported ABIs use 32-bit @code{int}s. The n64 ABI -+uses 64-bit @code{long}s, as does the 64-bit EABI; the others use -+32-bit @code{long}s. Pointers are the same size as @code{long}s, -+or the same size as integer registers, whichever is smaller. -+ -+@item -msym32 -+@itemx -mno-sym32 -+@opindex msym32 -+@opindex mno-sym32 -+Assume (do not assume) that all symbols have 32-bit values, regardless -+of the selected ABI@. This option is useful in combination with -+@option{-mabi=64} and @option{-mno-abicalls} because it allows GCC -+to generate shorter and faster references to symbolic addresses. -+ -+@item -G @var{num} -+@opindex G -+Put definitions of externally-visible data in a small data section -+if that data is no bigger than @var{num} bytes. GCC can then access -+the data more efficiently; see @option{-mgpopt} for details. -+ -+The default @option{-G} option depends on the configuration. -+ -+@item -mlocal-sdata -+@itemx -mno-local-sdata -+@opindex mlocal-sdata -+@opindex mno-local-sdata -+Extend (do not extend) the @option{-G} behavior to local data too, -+such as to static variables in C@. @option{-mlocal-sdata} is the -+default for all configurations. -+ -+If the linker complains that an application is using too much small data, -+you might want to try rebuilding the less performance-critical parts with -+@option{-mno-local-sdata}. You might also want to build large -+libraries with @option{-mno-local-sdata}, so that the libraries leave -+more room for the main program. -+ -+@item -mextern-sdata -+@itemx -mno-extern-sdata -+@opindex mextern-sdata -+@opindex mno-extern-sdata -+Assume (do not assume) that externally-defined data will be in -+a small data section if that data is within the @option{-G} limit. -+@option{-mextern-sdata} is the default for all configurations. -+ -+If you compile a module @var{Mod} with @option{-mextern-sdata} @option{-G -+@var{num}} @option{-mgpopt}, and @var{Mod} references a variable @var{Var} -+that is no bigger than @var{num} bytes, you must make sure that @var{Var} -+is placed in a small data section. If @var{Var} is defined by another -+module, you must either compile that module with a high-enough -+@option{-G} setting or attach a @code{section} attribute to @var{Var}'s -+definition. If @var{Var} is common, you must link the application -+with a high-enough @option{-G} setting. -+ -+The easiest way of satisfying these restrictions is to compile -+and link every module with the same @option{-G} option. However, -+you may wish to build a library that supports several different -+small data limits. You can do this by compiling the library with -+the highest supported @option{-G} setting and additionally using -+@option{-mno-extern-sdata} to stop the library from making assumptions -+about externally-defined data. -+ -+@item -mgpopt -+@itemx -mno-gpopt -+@opindex mgpopt -+@opindex mno-gpopt -+Use (do not use) GP-relative accesses for symbols that are known to be -+in a small data section; see @option{-G}, @option{-mlocal-sdata} and -+@option{-mextern-sdata}. @option{-mgpopt} is the default for all -+configurations. -+ -+@option{-mno-gpopt} is useful for cases where the @code{$gp} register -+might not hold the value of @code{_gp}. For example, if the code is -+part of a library that might be used in a boot monitor, programs that -+call boot monitor routines will pass an unknown value in @code{$gp}. -+(In such situations, the boot monitor itself would usually be compiled -+with @option{-G0}.) -+ -+@option{-mno-gpopt} implies @option{-mno-local-sdata} and -+@option{-mno-extern-sdata}. -+ -+@item -membedded-data -+@itemx -mno-embedded-data -+@opindex membedded-data -+@opindex mno-embedded-data -+Allocate variables to the read-only data section first if possible, then -+next in the small data section if possible, otherwise in data. This gives -+slightly slower code than the default, but reduces the amount of RAM required -+when executing, and thus may be preferred for some embedded systems. -+ -+@item -muninit-const-in-rodata -+@itemx -mno-uninit-const-in-rodata -+@opindex muninit-const-in-rodata -+@opindex mno-uninit-const-in-rodata -+Put uninitialized @code{const} variables in the read-only data section. -+This option is only meaningful in conjunction with @option{-membedded-data}. -+ -+@item -mcode-readable=@var{setting} -+@opindex mcode-readable -+Specify whether GCC may generate code that reads from executable sections. -+There are three possible settings: -+ -+@table @gcctabopt -+@item -mcode-readable=yes -+Instructions may freely access executable sections. This is the -+default setting. -+ -+@item -mcode-readable=pcrel -+MIPS16 PC-relative load instructions can access executable sections, -+but other instructions must not do so. This option is useful on 4KSc -+and 4KSd processors when the code TLBs have the Read Inhibit bit set. -+It is also useful on processors that can be configured to have a dual -+instruction/data SRAM interface and that, like the M4K, automatically -+redirect PC-relative loads to the instruction RAM. -+ -+@item -mcode-readable=no -+Instructions must not access executable sections. This option can be -+useful on targets that are configured to have a dual instruction/data -+SRAM interface but that (unlike the M4K) do not automatically redirect -+PC-relative loads to the instruction RAM. -+@end table -+ -+@item -msplit-addresses -+@itemx -mno-split-addresses -+@opindex msplit-addresses -+@opindex mno-split-addresses -+Enable (disable) use of the @code{%hi()} and @code{%lo()} assembler -+relocation operators. This option has been superseded by -+@option{-mexplicit-relocs} but is retained for backwards compatibility. -+ -+@item -mexplicit-relocs -+@itemx -mno-explicit-relocs -+@opindex mexplicit-relocs -+@opindex mno-explicit-relocs -+Use (do not use) assembler relocation operators when dealing with symbolic -+addresses. The alternative, selected by @option{-mno-explicit-relocs}, -+is to use assembler macros instead. -+ -+@option{-mexplicit-relocs} is the default if GCC was configured -+to use an assembler that supports relocation operators. -+ -+@item -mcheck-zero-division -+@itemx -mno-check-zero-division -+@opindex mcheck-zero-division -+@opindex mno-check-zero-division -+Trap (do not trap) on integer division by zero. -+ -+The default is @option{-mcheck-zero-division}. -+ -+@item -mdivide-traps -+@itemx -mdivide-breaks -+@opindex mdivide-traps -+@opindex mdivide-breaks -+MIPS systems check for division by zero by generating either a -+conditional trap or a break instruction. Using traps results in -+smaller code, but is only supported on MIPS II and later. Also, some -+versions of the Linux kernel have a bug that prevents trap from -+generating the proper signal (@code{SIGFPE}). Use @option{-mdivide-traps} to -+allow conditional traps on architectures that support them and -+@option{-mdivide-breaks} to force the use of breaks. -+ -+The default is usually @option{-mdivide-traps}, but this can be -+overridden at configure time using @option{--with-divide=breaks}. -+Divide-by-zero checks can be completely disabled using -+@option{-mno-check-zero-division}. -+ -+@item -mmemcpy -+@itemx -mno-memcpy -+@opindex mmemcpy -+@opindex mno-memcpy -+Force (do not force) the use of @code{memcpy()} for non-trivial block -+moves. The default is @option{-mno-memcpy}, which allows GCC to inline -+most constant-sized copies. -+ -+@item -mlong-calls -+@itemx -mno-long-calls -+@opindex mlong-calls -+@opindex mno-long-calls -+Disable (do not disable) use of the @code{jal} instruction. Calling -+functions using @code{jal} is more efficient but requires the caller -+and callee to be in the same 256 megabyte segment. -+ -+This option has no effect on abicalls code. The default is -+@option{-mno-long-calls}. -+ -+@item -mmad -+@itemx -mno-mad -+@opindex mmad -+@opindex mno-mad -+Enable (disable) use of the @code{mad}, @code{madu} and @code{mul} -+instructions, as provided by the R4650 ISA@. -+ -+@item -mfused-madd -+@itemx -mno-fused-madd -+@opindex mfused-madd -+@opindex mno-fused-madd -+Enable (disable) use of the floating point multiply-accumulate -+instructions, when they are available. The default is -+@option{-mfused-madd}. -+ -+When multiply-accumulate instructions are used, the intermediate -+product is calculated to infinite precision and is not subject to -+the FCSR Flush to Zero bit. This may be undesirable in some -+circumstances. -+ -+@item -nocpp -+@opindex nocpp -+Tell the MIPS assembler to not run its preprocessor over user -+assembler files (with a @samp{.s} suffix) when assembling them. -+ -+@item -mfix-r4000 -+@itemx -mno-fix-r4000 -+@opindex mfix-r4000 -+@opindex mno-fix-r4000 -+Work around certain R4000 CPU errata: -+@itemize @minus -+@item -+A double-word or a variable shift may give an incorrect result if executed -+immediately after starting an integer division. -+@item -+A double-word or a variable shift may give an incorrect result if executed -+while an integer multiplication is in progress. -+@item -+An integer division may give an incorrect result if started in a delay slot -+of a taken branch or a jump. -+@end itemize -+ -+@item -mfix-r4400 -+@itemx -mno-fix-r4400 -+@opindex mfix-r4400 -+@opindex mno-fix-r4400 -+Work around certain R4400 CPU errata: -+@itemize @minus -+@item -+A double-word or a variable shift may give an incorrect result if executed -+immediately after starting an integer division. -+@end itemize -+ -+@item -mfix-r10000 -+@itemx -mno-fix-r10000 -+@opindex mfix-r10000 -+@opindex mno-fix-r10000 -+Work around certain R10000 errata: -+@itemize @minus -+@item -+@code{ll}/@code{sc} sequences may not behave atomically on revisions -+prior to 3.0. They may deadlock on revisions 2.6 and earlier. -+@end itemize -+ -+This option can only be used if the target architecture supports -+branch-likely instructions. @option{-mfix-r10000} is the default when -+@option{-march=r10000} is used; @option{-mno-fix-r10000} is the default -+otherwise. -+ -+@item -mfix-vr4120 -+@itemx -mno-fix-vr4120 -+@opindex mfix-vr4120 -+Work around certain VR4120 errata: -+@itemize @minus -+@item -+@code{dmultu} does not always produce the correct result. -+@item -+@code{div} and @code{ddiv} do not always produce the correct result if one -+of the operands is negative. -+@end itemize -+The workarounds for the division errata rely on special functions in -+@file{libgcc.a}. At present, these functions are only provided by -+the @code{mips64vr*-elf} configurations. -+ -+Other VR4120 errata require a nop to be inserted between certain pairs of -+instructions. These errata are handled by the assembler, not by GCC itself. -+ -+@item -mfix-vr4130 -+@opindex mfix-vr4130 -+Work around the VR4130 @code{mflo}/@code{mfhi} errata. The -+workarounds are implemented by the assembler rather than by GCC, -+although GCC will avoid using @code{mflo} and @code{mfhi} if the -+VR4130 @code{macc}, @code{macchi}, @code{dmacc} and @code{dmacchi} -+instructions are available instead. -+ -+@item -mfix-sb1 -+@itemx -mno-fix-sb1 -+@opindex mfix-sb1 -+Work around certain SB-1 CPU core errata. -+(This flag currently works around the SB-1 revision 2 -+``F1'' and ``F2'' floating point errata.) -+ -+@item -mr10k-cache-barrier=@var{setting} -+@opindex mr10k-cache-barrier -+Specify whether GCC should insert cache barriers to avoid the -+side-effects of speculation on R10K processors. -+ -+In common with many processors, the R10K tries to predict the outcome -+of a conditional branch and speculatively executes instructions from -+the ``taken'' branch. It later aborts these instructions if the -+predicted outcome was wrong. However, on the R10K, even aborted -+instructions can have side effects. -+ -+This problem only affects kernel stores and, depending on the system, -+kernel loads. As an example, a speculatively-executed store may load -+the target memory into cache and mark the cache line as dirty, even if -+the store itself is later aborted. If a DMA operation writes to the -+same area of memory before the ``dirty'' line is flushed, the cached -+data will overwrite the DMA-ed data. See the R10K processor manual -+for a full description, including other potential problems. -+ -+One workaround is to insert cache barrier instructions before every memory -+access that might be speculatively executed and that might have side -+effects even if aborted. @option{-mr10k-cache-barrier=@var{setting}} -+controls GCC's implementation of this workaround. It assumes that -+aborted accesses to any byte in the following regions will not have -+side effects: -+ -+@enumerate -+@item -+the memory occupied by the current function's stack frame; -+ -+@item -+the memory occupied by an incoming stack argument; -+ -+@item -+the memory occupied by an object with a link-time-constant address. -+@end enumerate -+ -+It is the kernel's responsibility to ensure that speculative -+accesses to these regions are indeed safe. -+ -+If the input program contains a function declaration such as: -+ -+@smallexample -+void foo (void); -+@end smallexample -+ -+then the implementation of @code{foo} must allow @code{j foo} and -+@code{jal foo} to be executed speculatively. GCC honors this -+restriction for functions it compiles itself. It expects non-GCC -+functions (such as hand-written assembly code) to do the same. -+ -+The option has three forms: -+ -+@table @gcctabopt -+@item -mr10k-cache-barrier=load-store -+Insert a cache barrier before a load or store that might be -+speculatively executed and that might have side effects even -+if aborted. -+ -+@item -mr10k-cache-barrier=store -+Insert a cache barrier before a store that might be speculatively -+executed and that might have side effects even if aborted. -+ -+@item -mr10k-cache-barrier=none -+Disable the insertion of cache barriers. This is the default setting. -+@end table -+ -+@item -mflush-func=@var{func} -+@itemx -mno-flush-func -+@opindex mflush-func -+Specifies the function to call to flush the I and D caches, or to not -+call any such function. If called, the function must take the same -+arguments as the common @code{_flush_func()}, that is, the address of the -+memory range for which the cache is being flushed, the size of the -+memory range, and the number 3 (to flush both caches). The default -+depends on the target GCC was configured for, but commonly is either -+@samp{_flush_func} or @samp{__cpu_flush}. -+ -+@item mbranch-cost=@var{num} -+@opindex mbranch-cost -+Set the cost of branches to roughly @var{num} ``simple'' instructions. -+This cost is only a heuristic and is not guaranteed to produce -+consistent results across releases. A zero cost redundantly selects -+the default, which is based on the @option{-mtune} setting. -+ -+@item -mbranch-likely -+@itemx -mno-branch-likely -+@opindex mbranch-likely -+@opindex mno-branch-likely -+Enable or disable use of Branch Likely instructions, regardless of the -+default for the selected architecture. By default, Branch Likely -+instructions may be generated if they are supported by the selected -+architecture. An exception is for the MIPS32 and MIPS64 architectures -+and processors which implement those architectures; for those, Branch -+Likely instructions will not be generated by default because the MIPS32 -+and MIPS64 architectures specifically deprecate their use. -+ -+@item -mfp-exceptions -+@itemx -mno-fp-exceptions -+@opindex mfp-exceptions -+Specifies whether FP exceptions are enabled. This affects how we schedule -+FP instructions for some processors. The default is that FP exceptions are -+enabled. -+ -+For instance, on the SB-1, if FP exceptions are disabled, and we are emitting -+64-bit code, then we can use both FP pipes. Otherwise, we can only use one -+FP pipe. -+ -+@item -mvr4130-align -+@itemx -mno-vr4130-align -+@opindex mvr4130-align -+The VR4130 pipeline is two-way superscalar, but can only issue two -+instructions together if the first one is 8-byte aligned. When this -+option is enabled, GCC will align pairs of instructions that it -+thinks should execute in parallel. -+ -+This option only has an effect when optimizing for the VR4130. -+It normally makes code faster, but at the expense of making it bigger. -+It is enabled by default at optimization level @option{-O3}. -+@end table -+ -+@node MMIX Options -+@subsection MMIX Options -+@cindex MMIX Options -+ -+These options are defined for the MMIX: -+ -+@table @gcctabopt -+@item -mlibfuncs -+@itemx -mno-libfuncs -+@opindex mlibfuncs -+@opindex mno-libfuncs -+Specify that intrinsic library functions are being compiled, passing all -+values in registers, no matter the size. -+ -+@item -mepsilon -+@itemx -mno-epsilon -+@opindex mepsilon -+@opindex mno-epsilon -+Generate floating-point comparison instructions that compare with respect -+to the @code{rE} epsilon register. -+ -+@item -mabi=mmixware -+@itemx -mabi=gnu -+@opindex mabi-mmixware -+@opindex mabi=gnu -+Generate code that passes function parameters and return values that (in -+the called function) are seen as registers @code{$0} and up, as opposed to -+the GNU ABI which uses global registers @code{$231} and up. -+ -+@item -mzero-extend -+@itemx -mno-zero-extend -+@opindex mzero-extend -+@opindex mno-zero-extend -+When reading data from memory in sizes shorter than 64 bits, use (do not -+use) zero-extending load instructions by default, rather than -+sign-extending ones. -+ -+@item -mknuthdiv -+@itemx -mno-knuthdiv -+@opindex mknuthdiv -+@opindex mno-knuthdiv -+Make the result of a division yielding a remainder have the same sign as -+the divisor. With the default, @option{-mno-knuthdiv}, the sign of the -+remainder follows the sign of the dividend. Both methods are -+arithmetically valid, the latter being almost exclusively used. -+ -+@item -mtoplevel-symbols -+@itemx -mno-toplevel-symbols -+@opindex mtoplevel-symbols -+@opindex mno-toplevel-symbols -+Prepend (do not prepend) a @samp{:} to all global symbols, so the assembly -+code can be used with the @code{PREFIX} assembly directive. -+ -+@item -melf -+@opindex melf -+Generate an executable in the ELF format, rather than the default -+@samp{mmo} format used by the @command{mmix} simulator. -+ -+@item -mbranch-predict -+@itemx -mno-branch-predict -+@opindex mbranch-predict -+@opindex mno-branch-predict -+Use (do not use) the probable-branch instructions, when static branch -+prediction indicates a probable branch. -+ -+@item -mbase-addresses -+@itemx -mno-base-addresses -+@opindex mbase-addresses -+@opindex mno-base-addresses -+Generate (do not generate) code that uses @emph{base addresses}. Using a -+base address automatically generates a request (handled by the assembler -+and the linker) for a constant to be set up in a global register. The -+register is used for one or more base address requests within the range 0 -+to 255 from the value held in the register. The generally leads to short -+and fast code, but the number of different data items that can be -+addressed is limited. This means that a program that uses lots of static -+data may require @option{-mno-base-addresses}. -+ -+@item -msingle-exit -+@itemx -mno-single-exit -+@opindex msingle-exit -+@opindex mno-single-exit -+Force (do not force) generated code to have a single exit point in each -+function. -+@end table -+ -+@node MN10300 Options -+@subsection MN10300 Options -+@cindex MN10300 options -+ -+These @option{-m} options are defined for Matsushita MN10300 architectures: -+ -+@table @gcctabopt -+@item -mmult-bug -+@opindex mmult-bug -+Generate code to avoid bugs in the multiply instructions for the MN10300 -+processors. This is the default. -+ -+@item -mno-mult-bug -+@opindex mno-mult-bug -+Do not generate code to avoid bugs in the multiply instructions for the -+MN10300 processors. -+ -+@item -mam33 -+@opindex mam33 -+Generate code which uses features specific to the AM33 processor. -+ -+@item -mno-am33 -+@opindex mno-am33 -+Do not generate code which uses features specific to the AM33 processor. This -+is the default. -+ -+@item -mreturn-pointer-on-d0 -+@opindex mreturn-pointer-on-d0 -+When generating a function which returns a pointer, return the pointer -+in both @code{a0} and @code{d0}. Otherwise, the pointer is returned -+only in a0, and attempts to call such functions without a prototype -+would result in errors. Note that this option is on by default; use -+@option{-mno-return-pointer-on-d0} to disable it. -+ -+@item -mno-crt0 -+@opindex mno-crt0 -+Do not link in the C run-time initialization object file. -+ -+@item -mrelax -+@opindex mrelax -+Indicate to the linker that it should perform a relaxation optimization pass -+to shorten branches, calls and absolute memory addresses. This option only -+has an effect when used on the command line for the final link step. -+ -+This option makes symbolic debugging impossible. -+@end table -+ -+@node PDP-11 Options -+@subsection PDP-11 Options -+@cindex PDP-11 Options -+ -+These options are defined for the PDP-11: -+ -+@table @gcctabopt -+@item -mfpu -+@opindex mfpu -+Use hardware FPP floating point. This is the default. (FIS floating -+point on the PDP-11/40 is not supported.) -+ -+@item -msoft-float -+@opindex msoft-float -+Do not use hardware floating point. -+ -+@item -mac0 -+@opindex mac0 -+Return floating-point results in ac0 (fr0 in Unix assembler syntax). -+ -+@item -mno-ac0 -+@opindex mno-ac0 -+Return floating-point results in memory. This is the default. -+ -+@item -m40 -+@opindex m40 -+Generate code for a PDP-11/40. -+ -+@item -m45 -+@opindex m45 -+Generate code for a PDP-11/45. This is the default. -+ -+@item -m10 -+@opindex m10 -+Generate code for a PDP-11/10. -+ -+@item -mbcopy-builtin -+@opindex bcopy-builtin -+Use inline @code{movmemhi} patterns for copying memory. This is the -+default. -+ -+@item -mbcopy -+@opindex mbcopy -+Do not use inline @code{movmemhi} patterns for copying memory. -+ -+@item -mint16 -+@itemx -mno-int32 -+@opindex mint16 -+@opindex mno-int32 -+Use 16-bit @code{int}. This is the default. -+ -+@item -mint32 -+@itemx -mno-int16 -+@opindex mint32 -+@opindex mno-int16 -+Use 32-bit @code{int}. -+ -+@item -mfloat64 -+@itemx -mno-float32 -+@opindex mfloat64 -+@opindex mno-float32 -+Use 64-bit @code{float}. This is the default. -+ -+@item -mfloat32 -+@itemx -mno-float64 -+@opindex mfloat32 -+@opindex mno-float64 -+Use 32-bit @code{float}. -+ -+@item -mabshi -+@opindex mabshi -+Use @code{abshi2} pattern. This is the default. -+ -+@item -mno-abshi -+@opindex mno-abshi -+Do not use @code{abshi2} pattern. -+ -+@item -mbranch-expensive -+@opindex mbranch-expensive -+Pretend that branches are expensive. This is for experimenting with -+code generation only. -+ -+@item -mbranch-cheap -+@opindex mbranch-cheap -+Do not pretend that branches are expensive. This is the default. -+ -+@item -msplit -+@opindex msplit -+Generate code for a system with split I&D@. -+ -+@item -mno-split -+@opindex mno-split -+Generate code for a system without split I&D@. This is the default. -+ -+@item -munix-asm -+@opindex munix-asm -+Use Unix assembler syntax. This is the default when configured for -+@samp{pdp11-*-bsd}. -+ -+@item -mdec-asm -+@opindex mdec-asm -+Use DEC assembler syntax. This is the default when configured for any -+PDP-11 target other than @samp{pdp11-*-bsd}. -+@end table -+ -+@node picoChip Options -+@subsection picoChip Options -+@cindex picoChip options -+ -+These @samp{-m} options are defined for picoChip implementations: -+ -+@table @gcctabopt -+ -+@item -mae=@var{ae_type} -+@opindex mcpu -+Set the instruction set, register set, and instruction scheduling -+parameters for array element type @var{ae_type}. Supported values -+for @var{ae_type} are @samp{ANY}, @samp{MUL}, and @samp{MAC}. -+ -+@option{-mae=ANY} selects a completely generic AE type. Code -+generated with this option will run on any of the other AE types. The -+code will not be as efficient as it would be if compiled for a specific -+AE type, and some types of operation (e.g., multiplication) will not -+work properly on all types of AE. -+ -+@option{-mae=MUL} selects a MUL AE type. This is the most useful AE type -+for compiled code, and is the default. -+ -+@option{-mae=MAC} selects a DSP-style MAC AE. Code compiled with this -+option may suffer from poor performance of byte (char) manipulation, -+since the DSP AE does not provide hardware support for byte load/stores. -+ -+@item -msymbol-as-address -+Enable the compiler to directly use a symbol name as an address in a -+load/store instruction, without first loading it into a -+register. Typically, the use of this option will generate larger -+programs, which run faster than when the option isn't used. However, the -+results vary from program to program, so it is left as a user option, -+rather than being permanently enabled. -+ -+@item -mno-inefficient-warnings -+Disables warnings about the generation of inefficient code. These -+warnings can be generated, for example, when compiling code which -+performs byte-level memory operations on the MAC AE type. The MAC AE has -+no hardware support for byte-level memory operations, so all byte -+load/stores must be synthesized from word load/store operations. This is -+inefficient and a warning will be generated indicating to the programmer -+that they should rewrite the code to avoid byte operations, or to target -+an AE type which has the necessary hardware support. This option enables -+the warning to be turned off. -+ -+@end table -+ -+@node PowerPC Options -+@subsection PowerPC Options -+@cindex PowerPC options -+ -+These are listed under @xref{RS/6000 and PowerPC Options}. -+ -+@node RS/6000 and PowerPC Options -+@subsection IBM RS/6000 and PowerPC Options -+@cindex RS/6000 and PowerPC Options -+@cindex IBM RS/6000 and PowerPC Options -+ -+These @samp{-m} options are defined for the IBM RS/6000 and PowerPC: -+@table @gcctabopt -+@item -mpower -+@itemx -mno-power -+@itemx -mpower2 -+@itemx -mno-power2 -+@itemx -mpowerpc -+@itemx -mno-powerpc -+@itemx -mpowerpc-gpopt -+@itemx -mno-powerpc-gpopt -+@itemx -mpowerpc-gfxopt -+@itemx -mno-powerpc-gfxopt -+@itemx -mpowerpc64 -+@itemx -mno-powerpc64 -+@itemx -mmfcrf -+@itemx -mno-mfcrf -+@itemx -mpopcntb -+@itemx -mno-popcntb -+@itemx -mfprnd -+@itemx -mno-fprnd -+@itemx -mcmpb -+@itemx -mno-cmpb -+@itemx -mmfpgpr -+@itemx -mno-mfpgpr -+@itemx -mhard-dfp -+@itemx -mno-hard-dfp -+@opindex mpower -+@opindex mno-power -+@opindex mpower2 -+@opindex mno-power2 -+@opindex mpowerpc -+@opindex mno-powerpc -+@opindex mpowerpc-gpopt -+@opindex mno-powerpc-gpopt -+@opindex mpowerpc-gfxopt -+@opindex mno-powerpc-gfxopt -+@opindex mpowerpc64 -+@opindex mno-powerpc64 -+@opindex mmfcrf -+@opindex mno-mfcrf -+@opindex mpopcntb -+@opindex mno-popcntb -+@opindex mfprnd -+@opindex mno-fprnd -+@opindex mcmpb -+@opindex mno-cmpb -+@opindex mmfpgpr -+@opindex mno-mfpgpr -+@opindex mhard-dfp -+@opindex mno-hard-dfp -+GCC supports two related instruction set architectures for the -+RS/6000 and PowerPC@. The @dfn{POWER} instruction set are those -+instructions supported by the @samp{rios} chip set used in the original -+RS/6000 systems and the @dfn{PowerPC} instruction set is the -+architecture of the Freescale MPC5xx, MPC6xx, MPC8xx microprocessors, and -+the IBM 4xx, 6xx, and follow-on microprocessors. -+ -+Neither architecture is a subset of the other. However there is a -+large common subset of instructions supported by both. An MQ -+register is included in processors supporting the POWER architecture. -+ -+You use these options to specify which instructions are available on the -+processor you are using. The default value of these options is -+determined when configuring GCC@. Specifying the -+@option{-mcpu=@var{cpu_type}} overrides the specification of these -+options. We recommend you use the @option{-mcpu=@var{cpu_type}} option -+rather than the options listed above. -+ -+The @option{-mpower} option allows GCC to generate instructions that -+are found only in the POWER architecture and to use the MQ register. -+Specifying @option{-mpower2} implies @option{-power} and also allows GCC -+to generate instructions that are present in the POWER2 architecture but -+not the original POWER architecture. -+ -+The @option{-mpowerpc} option allows GCC to generate instructions that -+are found only in the 32-bit subset of the PowerPC architecture. -+Specifying @option{-mpowerpc-gpopt} implies @option{-mpowerpc} and also allows -+GCC to use the optional PowerPC architecture instructions in the -+General Purpose group, including floating-point square root. Specifying -+@option{-mpowerpc-gfxopt} implies @option{-mpowerpc} and also allows GCC to -+use the optional PowerPC architecture instructions in the Graphics -+group, including floating-point select. -+ -+The @option{-mmfcrf} option allows GCC to generate the move from -+condition register field instruction implemented on the POWER4 -+processor and other processors that support the PowerPC V2.01 -+architecture. -+The @option{-mpopcntb} option allows GCC to generate the popcount and -+double precision FP reciprocal estimate instruction implemented on the -+POWER5 processor and other processors that support the PowerPC V2.02 -+architecture. -+The @option{-mfprnd} option allows GCC to generate the FP round to -+integer instructions implemented on the POWER5+ processor and other -+processors that support the PowerPC V2.03 architecture. -+The @option{-mcmpb} option allows GCC to generate the compare bytes -+instruction implemented on the POWER6 processor and other processors -+that support the PowerPC V2.05 architecture. -+The @option{-mmfpgpr} option allows GCC to generate the FP move to/from -+general purpose register instructions implemented on the POWER6X -+processor and other processors that support the extended PowerPC V2.05 -+architecture. -+The @option{-mhard-dfp} option allows GCC to generate the decimal floating -+point instructions implemented on some POWER processors. -+ -+The @option{-mpowerpc64} option allows GCC to generate the additional -+64-bit instructions that are found in the full PowerPC64 architecture -+and to treat GPRs as 64-bit, doubleword quantities. GCC defaults to -+@option{-mno-powerpc64}. -+ -+If you specify both @option{-mno-power} and @option{-mno-powerpc}, GCC -+will use only the instructions in the common subset of both -+architectures plus some special AIX common-mode calls, and will not use -+the MQ register. Specifying both @option{-mpower} and @option{-mpowerpc} -+permits GCC to use any instruction from either architecture and to -+allow use of the MQ register; specify this for the Motorola MPC601. -+ -+@item -mnew-mnemonics -+@itemx -mold-mnemonics -+@opindex mnew-mnemonics -+@opindex mold-mnemonics -+Select which mnemonics to use in the generated assembler code. With -+@option{-mnew-mnemonics}, GCC uses the assembler mnemonics defined for -+the PowerPC architecture. With @option{-mold-mnemonics} it uses the -+assembler mnemonics defined for the POWER architecture. Instructions -+defined in only one architecture have only one mnemonic; GCC uses that -+mnemonic irrespective of which of these options is specified. -+ -+GCC defaults to the mnemonics appropriate for the architecture in -+use. Specifying @option{-mcpu=@var{cpu_type}} sometimes overrides the -+value of these option. Unless you are building a cross-compiler, you -+should normally not specify either @option{-mnew-mnemonics} or -+@option{-mold-mnemonics}, but should instead accept the default. -+ -+@item -mcpu=@var{cpu_type} -+@opindex mcpu -+Set architecture type, register usage, choice of mnemonics, and -+instruction scheduling parameters for machine type @var{cpu_type}. -+Supported values for @var{cpu_type} are @samp{401}, @samp{403}, -+@samp{405}, @samp{405fp}, @samp{440}, @samp{440fp}, @samp{464}, @samp{464fp}, -+@samp{505}, @samp{601}, @samp{602}, @samp{603}, @samp{603e}, @samp{604}, -+@samp{604e}, @samp{620}, @samp{630}, @samp{740}, @samp{7400}, -+@samp{7450}, @samp{750}, @samp{801}, @samp{821}, @samp{823}, -+@samp{860}, @samp{970}, @samp{8540}, @samp{e300c2}, @samp{e300c3}, -+@samp{e500mc}, @samp{ec603e}, @samp{G3}, @samp{G4}, @samp{G5}, -+@samp{power}, @samp{power2}, @samp{power3}, @samp{power4}, -+@samp{power5}, @samp{power5+}, @samp{power6}, @samp{power6x}, @samp{power7} -+@samp{common}, @samp{powerpc}, @samp{powerpc64}, @samp{rios}, -+@samp{rios1}, @samp{rios2}, @samp{rsc}, and @samp{rs64}. -+ -+@option{-mcpu=common} selects a completely generic processor. Code -+generated under this option will run on any POWER or PowerPC processor. -+GCC will use only the instructions in the common subset of both -+architectures, and will not use the MQ register. GCC assumes a generic -+processor model for scheduling purposes. -+ -+@option{-mcpu=power}, @option{-mcpu=power2}, @option{-mcpu=powerpc}, and -+@option{-mcpu=powerpc64} specify generic POWER, POWER2, pure 32-bit -+PowerPC (i.e., not MPC601), and 64-bit PowerPC architecture machine -+types, with an appropriate, generic processor model assumed for -+scheduling purposes. -+ -+The other options specify a specific processor. Code generated under -+those options will run best on that processor, and may not run at all on -+others. -+ -+The @option{-mcpu} options automatically enable or disable the -+following options: -+ -+@gccoptlist{-maltivec -mfprnd -mhard-float -mmfcrf -mmultiple @gol -+-mnew-mnemonics -mpopcntb -mpower -mpower2 -mpowerpc64 @gol -+-mpowerpc-gpopt -mpowerpc-gfxopt -msingle-float -mdouble-float @gol -+-msimple-fpu -mstring -mmulhw -mdlmzb -mmfpgpr} -+ -+The particular options set for any particular CPU will vary between -+compiler versions, depending on what setting seems to produce optimal -+code for that CPU; it doesn't necessarily reflect the actual hardware's -+capabilities. If you wish to set an individual option to a particular -+value, you may specify it after the @option{-mcpu} option, like -+@samp{-mcpu=970 -mno-altivec}. -+ -+On AIX, the @option{-maltivec} and @option{-mpowerpc64} options are -+not enabled or disabled by the @option{-mcpu} option at present because -+AIX does not have full support for these options. You may still -+enable or disable them individually if you're sure it'll work in your -+environment. -+ -+@item -mtune=@var{cpu_type} -+@opindex mtune -+Set the instruction scheduling parameters for machine type -+@var{cpu_type}, but do not set the architecture type, register usage, or -+choice of mnemonics, as @option{-mcpu=@var{cpu_type}} would. The same -+values for @var{cpu_type} are used for @option{-mtune} as for -+@option{-mcpu}. If both are specified, the code generated will use the -+architecture, registers, and mnemonics set by @option{-mcpu}, but the -+scheduling parameters set by @option{-mtune}. -+ -+@item -mswdiv -+@itemx -mno-swdiv -+@opindex mswdiv -+@opindex mno-swdiv -+Generate code to compute division as reciprocal estimate and iterative -+refinement, creating opportunities for increased throughput. This -+feature requires: optional PowerPC Graphics instruction set for single -+precision and FRE instruction for double precision, assuming divides -+cannot generate user-visible traps, and the domain values not include -+Infinities, denormals or zero denominator. -+ -+@item -maltivec -+@itemx -mno-altivec -+@opindex maltivec -+@opindex mno-altivec -+Generate code that uses (does not use) AltiVec instructions, and also -+enable the use of built-in functions that allow more direct access to -+the AltiVec instruction set. You may also need to set -+@option{-mabi=altivec} to adjust the current ABI with AltiVec ABI -+enhancements. -+ -+@item -mvrsave -+@itemx -mno-vrsave -+@opindex mvrsave -+@opindex mno-vrsave -+Generate VRSAVE instructions when generating AltiVec code. -+ -+@item -mgen-cell-microcode -+@opindex mgen-cell-microcode -+Generate Cell microcode instructions -+ -+@item -mwarn-cell-microcode -+@opindex mwarn-cell-microcode -+Warning when a Cell microcode instruction is going to emitted. An example -+of a Cell microcode instruction is a variable shift. -+ -+@item -msecure-plt -+@opindex msecure-plt -+Generate code that allows ld and ld.so to build executables and shared -+libraries with non-exec .plt and .got sections. This is a PowerPC -+32-bit SYSV ABI option. -+ -+@item -mbss-plt -+@opindex mbss-plt -+Generate code that uses a BSS .plt section that ld.so fills in, and -+requires .plt and .got sections that are both writable and executable. -+This is a PowerPC 32-bit SYSV ABI option. -+ -+@item -misel -+@itemx -mno-isel -+@opindex misel -+@opindex mno-isel -+This switch enables or disables the generation of ISEL instructions. -+ -+@item -misel=@var{yes/no} -+This switch has been deprecated. Use @option{-misel} and -+@option{-mno-isel} instead. -+ -+@item -mspe -+@itemx -mno-spe -+@opindex mspe -+@opindex mno-spe -+This switch enables or disables the generation of SPE simd -+instructions. -+ -+@item -mpaired -+@itemx -mno-paired -+@opindex mpaired -+@opindex mno-paired -+This switch enables or disables the generation of PAIRED simd -+instructions. -+ -+@item -mspe=@var{yes/no} -+This option has been deprecated. Use @option{-mspe} and -+@option{-mno-spe} instead. -+ -+@item -mfloat-gprs=@var{yes/single/double/no} -+@itemx -mfloat-gprs -+@opindex mfloat-gprs -+This switch enables or disables the generation of floating point -+operations on the general purpose registers for architectures that -+support it. -+ -+The argument @var{yes} or @var{single} enables the use of -+single-precision floating point operations. -+ -+The argument @var{double} enables the use of single and -+double-precision floating point operations. -+ -+The argument @var{no} disables floating point operations on the -+general purpose registers. -+ -+This option is currently only available on the MPC854x. -+ -+@item -m32 -+@itemx -m64 -+@opindex m32 -+@opindex m64 -+Generate code for 32-bit or 64-bit environments of Darwin and SVR4 -+targets (including GNU/Linux). The 32-bit environment sets int, long -+and pointer to 32 bits and generates code that runs on any PowerPC -+variant. The 64-bit environment sets int to 32 bits and long and -+pointer to 64 bits, and generates code for PowerPC64, as for -+@option{-mpowerpc64}. -+ -+@item -mfull-toc -+@itemx -mno-fp-in-toc -+@itemx -mno-sum-in-toc -+@itemx -mminimal-toc -+@opindex mfull-toc -+@opindex mno-fp-in-toc -+@opindex mno-sum-in-toc -+@opindex mminimal-toc -+Modify generation of the TOC (Table Of Contents), which is created for -+every executable file. The @option{-mfull-toc} option is selected by -+default. In that case, GCC will allocate at least one TOC entry for -+each unique non-automatic variable reference in your program. GCC -+will also place floating-point constants in the TOC@. However, only -+16,384 entries are available in the TOC@. -+ -+If you receive a linker error message that saying you have overflowed -+the available TOC space, you can reduce the amount of TOC space used -+with the @option{-mno-fp-in-toc} and @option{-mno-sum-in-toc} options. -+@option{-mno-fp-in-toc} prevents GCC from putting floating-point -+constants in the TOC and @option{-mno-sum-in-toc} forces GCC to -+generate code to calculate the sum of an address and a constant at -+run-time instead of putting that sum into the TOC@. You may specify one -+or both of these options. Each causes GCC to produce very slightly -+slower and larger code at the expense of conserving TOC space. -+ -+If you still run out of space in the TOC even when you specify both of -+these options, specify @option{-mminimal-toc} instead. This option causes -+GCC to make only one TOC entry for every file. When you specify this -+option, GCC will produce code that is slower and larger but which -+uses extremely little TOC space. You may wish to use this option -+only on files that contain less frequently executed code. -+ -+@item -maix64 -+@itemx -maix32 -+@opindex maix64 -+@opindex maix32 -+Enable 64-bit AIX ABI and calling convention: 64-bit pointers, 64-bit -+@code{long} type, and the infrastructure needed to support them. -+Specifying @option{-maix64} implies @option{-mpowerpc64} and -+@option{-mpowerpc}, while @option{-maix32} disables the 64-bit ABI and -+implies @option{-mno-powerpc64}. GCC defaults to @option{-maix32}. -+ -+@item -mxl-compat -+@itemx -mno-xl-compat -+@opindex mxl-compat -+@opindex mno-xl-compat -+Produce code that conforms more closely to IBM XL compiler semantics -+when using AIX-compatible ABI@. Pass floating-point arguments to -+prototyped functions beyond the register save area (RSA) on the stack -+in addition to argument FPRs. Do not assume that most significant -+double in 128-bit long double value is properly rounded when comparing -+values and converting to double. Use XL symbol names for long double -+support routines. -+ -+The AIX calling convention was extended but not initially documented to -+handle an obscure K&R C case of calling a function that takes the -+address of its arguments with fewer arguments than declared. IBM XL -+compilers access floating point arguments which do not fit in the -+RSA from the stack when a subroutine is compiled without -+optimization. Because always storing floating-point arguments on the -+stack is inefficient and rarely needed, this option is not enabled by -+default and only is necessary when calling subroutines compiled by IBM -+XL compilers without optimization. -+ -+@item -mpe -+@opindex mpe -+Support @dfn{IBM RS/6000 SP} @dfn{Parallel Environment} (PE)@. Link an -+application written to use message passing with special startup code to -+enable the application to run. The system must have PE installed in the -+standard location (@file{/usr/lpp/ppe.poe/}), or the @file{specs} file -+must be overridden with the @option{-specs=} option to specify the -+appropriate directory location. The Parallel Environment does not -+support threads, so the @option{-mpe} option and the @option{-pthread} -+option are incompatible. -+ -+@item -malign-natural -+@itemx -malign-power -+@opindex malign-natural -+@opindex malign-power -+On AIX, 32-bit Darwin, and 64-bit PowerPC GNU/Linux, the option -+@option{-malign-natural} overrides the ABI-defined alignment of larger -+types, such as floating-point doubles, on their natural size-based boundary. -+The option @option{-malign-power} instructs GCC to follow the ABI-specified -+alignment rules. GCC defaults to the standard alignment defined in the ABI@. -+ -+On 64-bit Darwin, natural alignment is the default, and @option{-malign-power} -+is not supported. -+ -+@item -msoft-float -+@itemx -mhard-float -+@opindex msoft-float -+@opindex mhard-float -+Generate code that does not use (uses) the floating-point register set. -+Software floating point emulation is provided if you use the -+@option{-msoft-float} option, and pass the option to GCC when linking. -+ -+@item -msingle-float -+@itemx -mdouble-float -+@opindex msingle-float -+@opindex mdouble-float -+Generate code for single or double-precision floating point operations. -+@option{-mdouble-float} implies @option{-msingle-float}. -+ -+@item -msimple-fpu -+@opindex msimple-fpu -+Do not generate sqrt and div instructions for hardware floating point unit. -+ -+@item -mfpu -+@opindex mfpu -+Specify type of floating point unit. Valid values are @var{sp_lite} -+(equivalent to -msingle-float -msimple-fpu), @var{dp_lite} (equivalent -+to -mdouble-float -msimple-fpu), @var{sp_full} (equivalent to -msingle-float), -+and @var{dp_full} (equivalent to -mdouble-float). -+ -+@item -mxilinx-fpu -+@opindex mxilinx-fpu -+Perform optimizations for floating point unit on Xilinx PPC 405/440. -+ -+@item -mmultiple -+@itemx -mno-multiple -+@opindex mmultiple -+@opindex mno-multiple -+Generate code that uses (does not use) the load multiple word -+instructions and the store multiple word instructions. These -+instructions are generated by default on POWER systems, and not -+generated on PowerPC systems. Do not use @option{-mmultiple} on little -+endian PowerPC systems, since those instructions do not work when the -+processor is in little endian mode. The exceptions are PPC740 and -+PPC750 which permit the instructions usage in little endian mode. -+ -+@item -mstring -+@itemx -mno-string -+@opindex mstring -+@opindex mno-string -+Generate code that uses (does not use) the load string instructions -+and the store string word instructions to save multiple registers and -+do small block moves. These instructions are generated by default on -+POWER systems, and not generated on PowerPC systems. Do not use -+@option{-mstring} on little endian PowerPC systems, since those -+instructions do not work when the processor is in little endian mode. -+The exceptions are PPC740 and PPC750 which permit the instructions -+usage in little endian mode. -+ -+@item -mupdate -+@itemx -mno-update -+@opindex mupdate -+@opindex mno-update -+Generate code that uses (does not use) the load or store instructions -+that update the base register to the address of the calculated memory -+location. These instructions are generated by default. If you use -+@option{-mno-update}, there is a small window between the time that the -+stack pointer is updated and the address of the previous frame is -+stored, which means code that walks the stack frame across interrupts or -+signals may get corrupted data. -+ -+@item -mavoid-indexed-addresses -+@item -mno-avoid-indexed-addresses -+@opindex mavoid-indexed-addresses -+@opindex mno-avoid-indexed-addresses -+Generate code that tries to avoid (not avoid) the use of indexed load -+or store instructions. These instructions can incur a performance -+penalty on Power6 processors in certain situations, such as when -+stepping through large arrays that cross a 16M boundary. This option -+is enabled by default when targetting Power6 and disabled otherwise. -+ -+@item -mfused-madd -+@itemx -mno-fused-madd -+@opindex mfused-madd -+@opindex mno-fused-madd -+Generate code that uses (does not use) the floating point multiply and -+accumulate instructions. These instructions are generated by default if -+hardware floating is used. -+ -+@item -mmulhw -+@itemx -mno-mulhw -+@opindex mmulhw -+@opindex mno-mulhw -+Generate code that uses (does not use) the half-word multiply and -+multiply-accumulate instructions on the IBM 405, 440 and 464 processors. -+These instructions are generated by default when targetting those -+processors. -+ -+@item -mdlmzb -+@itemx -mno-dlmzb -+@opindex mdlmzb -+@opindex mno-dlmzb -+Generate code that uses (does not use) the string-search @samp{dlmzb} -+instruction on the IBM 405, 440 and 464 processors. This instruction is -+generated by default when targetting those processors. -+ -+@item -mno-bit-align -+@itemx -mbit-align -+@opindex mno-bit-align -+@opindex mbit-align -+On System V.4 and embedded PowerPC systems do not (do) force structures -+and unions that contain bit-fields to be aligned to the base type of the -+bit-field. -+ -+For example, by default a structure containing nothing but 8 -+@code{unsigned} bit-fields of length 1 would be aligned to a 4 byte -+boundary and have a size of 4 bytes. By using @option{-mno-bit-align}, -+the structure would be aligned to a 1 byte boundary and be one byte in -+size. -+ -+@item -mno-strict-align -+@itemx -mstrict-align -+@opindex mno-strict-align -+@opindex mstrict-align -+On System V.4 and embedded PowerPC systems do not (do) assume that -+unaligned memory references will be handled by the system. -+ -+@item -mrelocatable -+@itemx -mno-relocatable -+@opindex mrelocatable -+@opindex mno-relocatable -+On embedded PowerPC systems generate code that allows (does not allow) -+the program to be relocated to a different address at runtime. If you -+use @option{-mrelocatable} on any module, all objects linked together must -+be compiled with @option{-mrelocatable} or @option{-mrelocatable-lib}. -+ -+@item -mrelocatable-lib -+@itemx -mno-relocatable-lib -+@opindex mrelocatable-lib -+@opindex mno-relocatable-lib -+On embedded PowerPC systems generate code that allows (does not allow) -+the program to be relocated to a different address at runtime. Modules -+compiled with @option{-mrelocatable-lib} can be linked with either modules -+compiled without @option{-mrelocatable} and @option{-mrelocatable-lib} or -+with modules compiled with the @option{-mrelocatable} options. -+ -+@item -mno-toc -+@itemx -mtoc -+@opindex mno-toc -+@opindex mtoc -+On System V.4 and embedded PowerPC systems do not (do) assume that -+register 2 contains a pointer to a global area pointing to the addresses -+used in the program. -+ -+@item -mlittle -+@itemx -mlittle-endian -+@opindex mlittle -+@opindex mlittle-endian -+On System V.4 and embedded PowerPC systems compile code for the -+processor in little endian mode. The @option{-mlittle-endian} option is -+the same as @option{-mlittle}. -+ -+@item -mbig -+@itemx -mbig-endian -+@opindex mbig -+@opindex mbig-endian -+On System V.4 and embedded PowerPC systems compile code for the -+processor in big endian mode. The @option{-mbig-endian} option is -+the same as @option{-mbig}. -+ -+@item -mdynamic-no-pic -+@opindex mdynamic-no-pic -+On Darwin and Mac OS X systems, compile code so that it is not -+relocatable, but that its external references are relocatable. The -+resulting code is suitable for applications, but not shared -+libraries. -+ -+@item -mprioritize-restricted-insns=@var{priority} -+@opindex mprioritize-restricted-insns -+This option controls the priority that is assigned to -+dispatch-slot restricted instructions during the second scheduling -+pass. The argument @var{priority} takes the value @var{0/1/2} to assign -+@var{no/highest/second-highest} priority to dispatch slot restricted -+instructions. -+ -+@item -msched-costly-dep=@var{dependence_type} -+@opindex msched-costly-dep -+This option controls which dependences are considered costly -+by the target during instruction scheduling. The argument -+@var{dependence_type} takes one of the following values: -+@var{no}: no dependence is costly, -+@var{all}: all dependences are costly, -+@var{true_store_to_load}: a true dependence from store to load is costly, -+@var{store_to_load}: any dependence from store to load is costly, -+@var{number}: any dependence which latency >= @var{number} is costly. -+ -+@item -minsert-sched-nops=@var{scheme} -+@opindex minsert-sched-nops -+This option controls which nop insertion scheme will be used during -+the second scheduling pass. The argument @var{scheme} takes one of the -+following values: -+@var{no}: Don't insert nops. -+@var{pad}: Pad with nops any dispatch group which has vacant issue slots, -+according to the scheduler's grouping. -+@var{regroup_exact}: Insert nops to force costly dependent insns into -+separate groups. Insert exactly as many nops as needed to force an insn -+to a new group, according to the estimated processor grouping. -+@var{number}: Insert nops to force costly dependent insns into -+separate groups. Insert @var{number} nops to force an insn to a new group. -+ -+@item -mcall-sysv -+@opindex mcall-sysv -+On System V.4 and embedded PowerPC systems compile code using calling -+conventions that adheres to the March 1995 draft of the System V -+Application Binary Interface, PowerPC processor supplement. This is the -+default unless you configured GCC using @samp{powerpc-*-eabiaix}. -+ -+@item -mcall-sysv-eabi -+@opindex mcall-sysv-eabi -+Specify both @option{-mcall-sysv} and @option{-meabi} options. -+ -+@item -mcall-sysv-noeabi -+@opindex mcall-sysv-noeabi -+Specify both @option{-mcall-sysv} and @option{-mno-eabi} options. -+ -+@item -mcall-solaris -+@opindex mcall-solaris -+On System V.4 and embedded PowerPC systems compile code for the Solaris -+operating system. -+ -+@item -mcall-linux -+@opindex mcall-linux -+On System V.4 and embedded PowerPC systems compile code for the -+Linux-based GNU system. -+ -+@item -mcall-gnu -+@opindex mcall-gnu -+On System V.4 and embedded PowerPC systems compile code for the -+Hurd-based GNU system. -+ -+@item -mcall-netbsd -+@opindex mcall-netbsd -+On System V.4 and embedded PowerPC systems compile code for the -+NetBSD operating system. -+ -+@item -maix-struct-return -+@opindex maix-struct-return -+Return all structures in memory (as specified by the AIX ABI)@. -+ -+@item -msvr4-struct-return -+@opindex msvr4-struct-return -+Return structures smaller than 8 bytes in registers (as specified by the -+SVR4 ABI)@. -+ -+@item -mabi=@var{abi-type} -+@opindex mabi -+Extend the current ABI with a particular extension, or remove such extension. -+Valid values are @var{altivec}, @var{no-altivec}, @var{spe}, -+@var{no-spe}, @var{ibmlongdouble}, @var{ieeelongdouble}@. -+ -+@item -mabi=spe -+@opindex mabi=spe -+Extend the current ABI with SPE ABI extensions. This does not change -+the default ABI, instead it adds the SPE ABI extensions to the current -+ABI@. -+ -+@item -mabi=no-spe -+@opindex mabi=no-spe -+Disable Booke SPE ABI extensions for the current ABI@. -+ -+@item -mabi=ibmlongdouble -+@opindex mabi=ibmlongdouble -+Change the current ABI to use IBM extended precision long double. -+This is a PowerPC 32-bit SYSV ABI option. -+ -+@item -mabi=ieeelongdouble -+@opindex mabi=ieeelongdouble -+Change the current ABI to use IEEE extended precision long double. -+This is a PowerPC 32-bit Linux ABI option. -+ -+@item -mprototype -+@itemx -mno-prototype -+@opindex mprototype -+@opindex mno-prototype -+On System V.4 and embedded PowerPC systems assume that all calls to -+variable argument functions are properly prototyped. Otherwise, the -+compiler must insert an instruction before every non prototyped call to -+set or clear bit 6 of the condition code register (@var{CR}) to -+indicate whether floating point values were passed in the floating point -+registers in case the function takes a variable arguments. With -+@option{-mprototype}, only calls to prototyped variable argument functions -+will set or clear the bit. -+ -+@item -msim -+@opindex msim -+On embedded PowerPC systems, assume that the startup module is called -+@file{sim-crt0.o} and that the standard C libraries are @file{libsim.a} and -+@file{libc.a}. This is the default for @samp{powerpc-*-eabisim} -+configurations. -+ -+@item -mmvme -+@opindex mmvme -+On embedded PowerPC systems, assume that the startup module is called -+@file{crt0.o} and the standard C libraries are @file{libmvme.a} and -+@file{libc.a}. -+ -+@item -mads -+@opindex mads -+On embedded PowerPC systems, assume that the startup module is called -+@file{crt0.o} and the standard C libraries are @file{libads.a} and -+@file{libc.a}. -+ -+@item -myellowknife -+@opindex myellowknife -+On embedded PowerPC systems, assume that the startup module is called -+@file{crt0.o} and the standard C libraries are @file{libyk.a} and -+@file{libc.a}. -+ -+@item -mvxworks -+@opindex mvxworks -+On System V.4 and embedded PowerPC systems, specify that you are -+compiling for a VxWorks system. -+ -+@item -memb -+@opindex memb -+On embedded PowerPC systems, set the @var{PPC_EMB} bit in the ELF flags -+header to indicate that @samp{eabi} extended relocations are used. -+ -+@item -meabi -+@itemx -mno-eabi -+@opindex meabi -+@opindex mno-eabi -+On System V.4 and embedded PowerPC systems do (do not) adhere to the -+Embedded Applications Binary Interface (eabi) which is a set of -+modifications to the System V.4 specifications. Selecting @option{-meabi} -+means that the stack is aligned to an 8 byte boundary, a function -+@code{__eabi} is called to from @code{main} to set up the eabi -+environment, and the @option{-msdata} option can use both @code{r2} and -+@code{r13} to point to two separate small data areas. Selecting -+@option{-mno-eabi} means that the stack is aligned to a 16 byte boundary, -+do not call an initialization function from @code{main}, and the -+@option{-msdata} option will only use @code{r13} to point to a single -+small data area. The @option{-meabi} option is on by default if you -+configured GCC using one of the @samp{powerpc*-*-eabi*} options. -+ -+@item -msdata=eabi -+@opindex msdata=eabi -+On System V.4 and embedded PowerPC systems, put small initialized -+@code{const} global and static data in the @samp{.sdata2} section, which -+is pointed to by register @code{r2}. Put small initialized -+non-@code{const} global and static data in the @samp{.sdata} section, -+which is pointed to by register @code{r13}. Put small uninitialized -+global and static data in the @samp{.sbss} section, which is adjacent to -+the @samp{.sdata} section. The @option{-msdata=eabi} option is -+incompatible with the @option{-mrelocatable} option. The -+@option{-msdata=eabi} option also sets the @option{-memb} option. -+ -+@item -msdata=sysv -+@opindex msdata=sysv -+On System V.4 and embedded PowerPC systems, put small global and static -+data in the @samp{.sdata} section, which is pointed to by register -+@code{r13}. Put small uninitialized global and static data in the -+@samp{.sbss} section, which is adjacent to the @samp{.sdata} section. -+The @option{-msdata=sysv} option is incompatible with the -+@option{-mrelocatable} option. -+ -+@item -msdata=default -+@itemx -msdata -+@opindex msdata=default -+@opindex msdata -+On System V.4 and embedded PowerPC systems, if @option{-meabi} is used, -+compile code the same as @option{-msdata=eabi}, otherwise compile code the -+same as @option{-msdata=sysv}. -+ -+@item -msdata=data -+@opindex msdata=data -+On System V.4 and embedded PowerPC systems, put small global -+data in the @samp{.sdata} section. Put small uninitialized global -+data in the @samp{.sbss} section. Do not use register @code{r13} -+to address small data however. This is the default behavior unless -+other @option{-msdata} options are used. -+ -+@item -msdata=none -+@itemx -mno-sdata -+@opindex msdata=none -+@opindex mno-sdata -+On embedded PowerPC systems, put all initialized global and static data -+in the @samp{.data} section, and all uninitialized data in the -+@samp{.bss} section. -+ -+@item -G @var{num} -+@opindex G -+@cindex smaller data references (PowerPC) -+@cindex .sdata/.sdata2 references (PowerPC) -+On embedded PowerPC systems, put global and static items less than or -+equal to @var{num} bytes into the small data or bss sections instead of -+the normal data or bss section. By default, @var{num} is 8. The -+@option{-G @var{num}} switch is also passed to the linker. -+All modules should be compiled with the same @option{-G @var{num}} value. -+ -+@item -mregnames -+@itemx -mno-regnames -+@opindex mregnames -+@opindex mno-regnames -+On System V.4 and embedded PowerPC systems do (do not) emit register -+names in the assembly language output using symbolic forms. -+ -+@item -mlongcall -+@itemx -mno-longcall -+@opindex mlongcall -+@opindex mno-longcall -+By default assume that all calls are far away so that a longer more -+expensive calling sequence is required. This is required for calls -+further than 32 megabytes (33,554,432 bytes) from the current location. -+A short call will be generated if the compiler knows -+the call cannot be that far away. This setting can be overridden by -+the @code{shortcall} function attribute, or by @code{#pragma -+longcall(0)}. -+ -+Some linkers are capable of detecting out-of-range calls and generating -+glue code on the fly. On these systems, long calls are unnecessary and -+generate slower code. As of this writing, the AIX linker can do this, -+as can the GNU linker for PowerPC/64. It is planned to add this feature -+to the GNU linker for 32-bit PowerPC systems as well. -+ -+On Darwin/PPC systems, @code{#pragma longcall} will generate ``jbsr -+callee, L42'', plus a ``branch island'' (glue code). The two target -+addresses represent the callee and the ``branch island''. The -+Darwin/PPC linker will prefer the first address and generate a ``bl -+callee'' if the PPC ``bl'' instruction will reach the callee directly; -+otherwise, the linker will generate ``bl L42'' to call the ``branch -+island''. The ``branch island'' is appended to the body of the -+calling function; it computes the full 32-bit address of the callee -+and jumps to it. -+ -+On Mach-O (Darwin) systems, this option directs the compiler emit to -+the glue for every direct call, and the Darwin linker decides whether -+to use or discard it. -+ -+In the future, we may cause GCC to ignore all longcall specifications -+when the linker is known to generate glue. -+ -+@item -pthread -+@opindex pthread -+Adds support for multithreading with the @dfn{pthreads} library. -+This option sets flags for both the preprocessor and linker. -+ -+@end table -+ -+@node S/390 and zSeries Options -+@subsection S/390 and zSeries Options -+@cindex S/390 and zSeries Options -+ -+These are the @samp{-m} options defined for the S/390 and zSeries architecture. -+ -+@table @gcctabopt -+@item -mhard-float -+@itemx -msoft-float -+@opindex mhard-float -+@opindex msoft-float -+Use (do not use) the hardware floating-point instructions and registers -+for floating-point operations. When @option{-msoft-float} is specified, -+functions in @file{libgcc.a} will be used to perform floating-point -+operations. When @option{-mhard-float} is specified, the compiler -+generates IEEE floating-point instructions. This is the default. -+ -+@item -mhard-dfp -+@itemx -mno-hard-dfp -+@opindex mhard-dfp -+@opindex mno-hard-dfp -+Use (do not use) the hardware decimal-floating-point instructions for -+decimal-floating-point operations. When @option{-mno-hard-dfp} is -+specified, functions in @file{libgcc.a} will be used to perform -+decimal-floating-point operations. When @option{-mhard-dfp} is -+specified, the compiler generates decimal-floating-point hardware -+instructions. This is the default for @option{-march=z9-ec} or higher. -+ -+@item -mlong-double-64 -+@itemx -mlong-double-128 -+@opindex mlong-double-64 -+@opindex mlong-double-128 -+These switches control the size of @code{long double} type. A size -+of 64bit makes the @code{long double} type equivalent to the @code{double} -+type. This is the default. -+ -+@item -mbackchain -+@itemx -mno-backchain -+@opindex mbackchain -+@opindex mno-backchain -+Store (do not store) the address of the caller's frame as backchain pointer -+into the callee's stack frame. -+A backchain may be needed to allow debugging using tools that do not understand -+DWARF-2 call frame information. -+When @option{-mno-packed-stack} is in effect, the backchain pointer is stored -+at the bottom of the stack frame; when @option{-mpacked-stack} is in effect, -+the backchain is placed into the topmost word of the 96/160 byte register -+save area. -+ -+In general, code compiled with @option{-mbackchain} is call-compatible with -+code compiled with @option{-mmo-backchain}; however, use of the backchain -+for debugging purposes usually requires that the whole binary is built with -+@option{-mbackchain}. Note that the combination of @option{-mbackchain}, -+@option{-mpacked-stack} and @option{-mhard-float} is not supported. In order -+to build a linux kernel use @option{-msoft-float}. -+ -+The default is to not maintain the backchain. -+ -+@item -mpacked-stack -+@itemx -mno-packed-stack -+@opindex mpacked-stack -+@opindex mno-packed-stack -+Use (do not use) the packed stack layout. When @option{-mno-packed-stack} is -+specified, the compiler uses the all fields of the 96/160 byte register save -+area only for their default purpose; unused fields still take up stack space. -+When @option{-mpacked-stack} is specified, register save slots are densely -+packed at the top of the register save area; unused space is reused for other -+purposes, allowing for more efficient use of the available stack space. -+However, when @option{-mbackchain} is also in effect, the topmost word of -+the save area is always used to store the backchain, and the return address -+register is always saved two words below the backchain. -+ -+As long as the stack frame backchain is not used, code generated with -+@option{-mpacked-stack} is call-compatible with code generated with -+@option{-mno-packed-stack}. Note that some non-FSF releases of GCC 2.95 for -+S/390 or zSeries generated code that uses the stack frame backchain at run -+time, not just for debugging purposes. Such code is not call-compatible -+with code compiled with @option{-mpacked-stack}. Also, note that the -+combination of @option{-mbackchain}, -+@option{-mpacked-stack} and @option{-mhard-float} is not supported. In order -+to build a linux kernel use @option{-msoft-float}. -+ -+The default is to not use the packed stack layout. -+ -+@item -msmall-exec -+@itemx -mno-small-exec -+@opindex msmall-exec -+@opindex mno-small-exec -+Generate (or do not generate) code using the @code{bras} instruction -+to do subroutine calls. -+This only works reliably if the total executable size does not -+exceed 64k. The default is to use the @code{basr} instruction instead, -+which does not have this limitation. -+ -+@item -m64 -+@itemx -m31 -+@opindex m64 -+@opindex m31 -+When @option{-m31} is specified, generate code compliant to the -+GNU/Linux for S/390 ABI@. When @option{-m64} is specified, generate -+code compliant to the GNU/Linux for zSeries ABI@. This allows GCC in -+particular to generate 64-bit instructions. For the @samp{s390} -+targets, the default is @option{-m31}, while the @samp{s390x} -+targets default to @option{-m64}. -+ -+@item -mzarch -+@itemx -mesa -+@opindex mzarch -+@opindex mesa -+When @option{-mzarch} is specified, generate code using the -+instructions available on z/Architecture. -+When @option{-mesa} is specified, generate code using the -+instructions available on ESA/390. Note that @option{-mesa} is -+not possible with @option{-m64}. -+When generating code compliant to the GNU/Linux for S/390 ABI, -+the default is @option{-mesa}. When generating code compliant -+to the GNU/Linux for zSeries ABI, the default is @option{-mzarch}. -+ -+@item -mmvcle -+@itemx -mno-mvcle -+@opindex mmvcle -+@opindex mno-mvcle -+Generate (or do not generate) code using the @code{mvcle} instruction -+to perform block moves. When @option{-mno-mvcle} is specified, -+use a @code{mvc} loop instead. This is the default unless optimizing for -+size. -+ -+@item -mdebug -+@itemx -mno-debug -+@opindex mdebug -+@opindex mno-debug -+Print (or do not print) additional debug information when compiling. -+The default is to not print debug information. -+ -+@item -march=@var{cpu-type} -+@opindex march -+Generate code that will run on @var{cpu-type}, which is the name of a system -+representing a certain processor type. Possible values for -+@var{cpu-type} are @samp{g5}, @samp{g6}, @samp{z900}, @samp{z990}, -+@samp{z9-109}, @samp{z9-ec} and @samp{z10}. -+When generating code using the instructions available on z/Architecture, -+the default is @option{-march=z900}. Otherwise, the default is -+@option{-march=g5}. -+ -+@item -mtune=@var{cpu-type} -+@opindex mtune -+Tune to @var{cpu-type} everything applicable about the generated code, -+except for the ABI and the set of available instructions. -+The list of @var{cpu-type} values is the same as for @option{-march}. -+The default is the value used for @option{-march}. -+ -+@item -mtpf-trace -+@itemx -mno-tpf-trace -+@opindex mtpf-trace -+@opindex mno-tpf-trace -+Generate code that adds (does not add) in TPF OS specific branches to trace -+routines in the operating system. This option is off by default, even -+when compiling for the TPF OS@. -+ -+@item -mfused-madd -+@itemx -mno-fused-madd -+@opindex mfused-madd -+@opindex mno-fused-madd -+Generate code that uses (does not use) the floating point multiply and -+accumulate instructions. These instructions are generated by default if -+hardware floating point is used. -+ -+@item -mwarn-framesize=@var{framesize} -+@opindex mwarn-framesize -+Emit a warning if the current function exceeds the given frame size. Because -+this is a compile time check it doesn't need to be a real problem when the program -+runs. It is intended to identify functions which most probably cause -+a stack overflow. It is useful to be used in an environment with limited stack -+size e.g.@: the linux kernel. -+ -+@item -mwarn-dynamicstack -+@opindex mwarn-dynamicstack -+Emit a warning if the function calls alloca or uses dynamically -+sized arrays. This is generally a bad idea with a limited stack size. -+ -+@item -mstack-guard=@var{stack-guard} -+@itemx -mstack-size=@var{stack-size} -+@opindex mstack-guard -+@opindex mstack-size -+If these options are provided the s390 back end emits additional instructions in -+the function prologue which trigger a trap if the stack size is @var{stack-guard} -+bytes above the @var{stack-size} (remember that the stack on s390 grows downward). -+If the @var{stack-guard} option is omitted the smallest power of 2 larger than -+the frame size of the compiled function is chosen. -+These options are intended to be used to help debugging stack overflow problems. -+The additionally emitted code causes only little overhead and hence can also be -+used in production like systems without greater performance degradation. The given -+values have to be exact powers of 2 and @var{stack-size} has to be greater than -+@var{stack-guard} without exceeding 64k. -+In order to be efficient the extra code makes the assumption that the stack starts -+at an address aligned to the value given by @var{stack-size}. -+The @var{stack-guard} option can only be used in conjunction with @var{stack-size}. -+@end table -+ -+@node Score Options -+@subsection Score Options -+@cindex Score Options -+ -+These options are defined for Score implementations: -+ -+@table @gcctabopt -+@item -meb -+@opindex meb -+Compile code for big endian mode. This is the default. -+ -+@item -mel -+@opindex mel -+Compile code for little endian mode. -+ -+@item -mnhwloop -+@opindex mnhwloop -+Disable generate bcnz instruction. -+ -+@item -muls -+@opindex muls -+Enable generate unaligned load and store instruction. -+ -+@item -mmac -+@opindex mmac -+Enable the use of multiply-accumulate instructions. Disabled by default. -+ -+@item -mscore5 -+@opindex mscore5 -+Specify the SCORE5 as the target architecture. -+ -+@item -mscore5u -+@opindex mscore5u -+Specify the SCORE5U of the target architecture. -+ -+@item -mscore7 -+@opindex mscore7 -+Specify the SCORE7 as the target architecture. This is the default. -+ -+@item -mscore7d -+@opindex mscore7d -+Specify the SCORE7D as the target architecture. -+@end table -+ -+@node SH Options -+@subsection SH Options -+ -+These @samp{-m} options are defined for the SH implementations: -+ -+@table @gcctabopt -+@item -m1 -+@opindex m1 -+Generate code for the SH1. -+ -+@item -m2 -+@opindex m2 -+Generate code for the SH2. -+ -+@item -m2e -+Generate code for the SH2e. -+ -+@item -m3 -+@opindex m3 -+Generate code for the SH3. -+ -+@item -m3e -+@opindex m3e -+Generate code for the SH3e. -+ -+@item -m4-nofpu -+@opindex m4-nofpu -+Generate code for the SH4 without a floating-point unit. -+ -+@item -m4-single-only -+@opindex m4-single-only -+Generate code for the SH4 with a floating-point unit that only -+supports single-precision arithmetic. -+ -+@item -m4-single -+@opindex m4-single -+Generate code for the SH4 assuming the floating-point unit is in -+single-precision mode by default. -+ -+@item -m4 -+@opindex m4 -+Generate code for the SH4. -+ -+@item -m4a-nofpu -+@opindex m4a-nofpu -+Generate code for the SH4al-dsp, or for a SH4a in such a way that the -+floating-point unit is not used. -+ -+@item -m4a-single-only -+@opindex m4a-single-only -+Generate code for the SH4a, in such a way that no double-precision -+floating point operations are used. -+ -+@item -m4a-single -+@opindex m4a-single -+Generate code for the SH4a assuming the floating-point unit is in -+single-precision mode by default. -+ -+@item -m4a -+@opindex m4a -+Generate code for the SH4a. -+ -+@item -m4al -+@opindex m4al -+Same as @option{-m4a-nofpu}, except that it implicitly passes -+@option{-dsp} to the assembler. GCC doesn't generate any DSP -+instructions at the moment. -+ -+@item -mb -+@opindex mb -+Compile code for the processor in big endian mode. -+ -+@item -ml -+@opindex ml -+Compile code for the processor in little endian mode. -+ -+@item -mdalign -+@opindex mdalign -+Align doubles at 64-bit boundaries. Note that this changes the calling -+conventions, and thus some functions from the standard C library will -+not work unless you recompile it first with @option{-mdalign}. -+ -+@item -mrelax -+@opindex mrelax -+Shorten some address references at link time, when possible; uses the -+linker option @option{-relax}. -+ -+@item -mbigtable -+@opindex mbigtable -+Use 32-bit offsets in @code{switch} tables. The default is to use -+16-bit offsets. -+ -+@item -mbitops -+@opindex mbitops -+Enable the use of bit manipulation instructions on SH2A. -+ -+@item -mfmovd -+@opindex mfmovd -+Enable the use of the instruction @code{fmovd}. -+ -+@item -mhitachi -+@opindex mhitachi -+Comply with the calling conventions defined by Renesas. -+ -+@item -mrenesas -+@opindex mhitachi -+Comply with the calling conventions defined by Renesas. -+ -+@item -mno-renesas -+@opindex mhitachi -+Comply with the calling conventions defined for GCC before the Renesas -+conventions were available. This option is the default for all -+targets of the SH toolchain except for @samp{sh-symbianelf}. -+ -+@item -mnomacsave -+@opindex mnomacsave -+Mark the @code{MAC} register as call-clobbered, even if -+@option{-mhitachi} is given. -+ -+@item -mieee -+@opindex mieee -+Increase IEEE-compliance of floating-point code. -+At the moment, this is equivalent to @option{-fno-finite-math-only}. -+When generating 16 bit SH opcodes, getting IEEE-conforming results for -+comparisons of NANs / infinities incurs extra overhead in every -+floating point comparison, therefore the default is set to -+@option{-ffinite-math-only}. -+ -+@item -minline-ic_invalidate -+@opindex minline-ic_invalidate -+Inline code to invalidate instruction cache entries after setting up -+nested function trampolines. -+This option has no effect if -musermode is in effect and the selected -+code generation option (e.g. -m4) does not allow the use of the icbi -+instruction. -+If the selected code generation option does not allow the use of the icbi -+instruction, and -musermode is not in effect, the inlined code will -+manipulate the instruction cache address array directly with an associative -+write. This not only requires privileged mode, but it will also -+fail if the cache line had been mapped via the TLB and has become unmapped. -+ -+@item -misize -+@opindex misize -+Dump instruction size and location in the assembly code. -+ -+@item -mpadstruct -+@opindex mpadstruct -+This option is deprecated. It pads structures to multiple of 4 bytes, -+which is incompatible with the SH ABI@. -+ -+@item -mspace -+@opindex mspace -+Optimize for space instead of speed. Implied by @option{-Os}. -+ -+@item -mprefergot -+@opindex mprefergot -+When generating position-independent code, emit function calls using -+the Global Offset Table instead of the Procedure Linkage Table. -+ -+@item -musermode -+@opindex musermode -+Don't generate privileged mode only code; implies -mno-inline-ic_invalidate -+if the inlined code would not work in user mode. -+This is the default when the target is @code{sh-*-linux*}. -+ -+@item -multcost=@var{number} -+@opindex multcost=@var{number} -+Set the cost to assume for a multiply insn. -+ -+@item -mdiv=@var{strategy} -+@opindex mdiv=@var{strategy} -+Set the division strategy to use for SHmedia code. @var{strategy} must be -+one of: call, call2, fp, inv, inv:minlat, inv20u, inv20l, inv:call, -+inv:call2, inv:fp . -+"fp" performs the operation in floating point. This has a very high latency, -+but needs only a few instructions, so it might be a good choice if -+your code has enough easily exploitable ILP to allow the compiler to -+schedule the floating point instructions together with other instructions. -+Division by zero causes a floating point exception. -+"inv" uses integer operations to calculate the inverse of the divisor, -+and then multiplies the dividend with the inverse. This strategy allows -+cse and hoisting of the inverse calculation. Division by zero calculates -+an unspecified result, but does not trap. -+"inv:minlat" is a variant of "inv" where if no cse / hoisting opportunities -+have been found, or if the entire operation has been hoisted to the same -+place, the last stages of the inverse calculation are intertwined with the -+final multiply to reduce the overall latency, at the expense of using a few -+more instructions, and thus offering fewer scheduling opportunities with -+other code. -+"call" calls a library function that usually implements the inv:minlat -+strategy. -+This gives high code density for m5-*media-nofpu compilations. -+"call2" uses a different entry point of the same library function, where it -+assumes that a pointer to a lookup table has already been set up, which -+exposes the pointer load to cse / code hoisting optimizations. -+"inv:call", "inv:call2" and "inv:fp" all use the "inv" algorithm for initial -+code generation, but if the code stays unoptimized, revert to the "call", -+"call2", or "fp" strategies, respectively. Note that the -+potentially-trapping side effect of division by zero is carried by a -+separate instruction, so it is possible that all the integer instructions -+are hoisted out, but the marker for the side effect stays where it is. -+A recombination to fp operations or a call is not possible in that case. -+"inv20u" and "inv20l" are variants of the "inv:minlat" strategy. In the case -+that the inverse calculation was nor separated from the multiply, they speed -+up division where the dividend fits into 20 bits (plus sign where applicable), -+by inserting a test to skip a number of operations in this case; this test -+slows down the case of larger dividends. inv20u assumes the case of a such -+a small dividend to be unlikely, and inv20l assumes it to be likely. -+ -+@item -mdivsi3_libfunc=@var{name} -+@opindex mdivsi3_libfunc=@var{name} -+Set the name of the library function used for 32 bit signed division to -+@var{name}. This only affect the name used in the call and inv:call -+division strategies, and the compiler will still expect the same -+sets of input/output/clobbered registers as if this option was not present. -+ -+@item -mfixed-range=@var{register-range} -+@opindex mfixed-range -+Generate code treating the given register range as fixed registers. -+A fixed register is one that the register allocator can not use. This is -+useful when compiling kernel code. A register range is specified as -+two registers separated by a dash. Multiple register ranges can be -+specified separated by a comma. -+ -+@item -madjust-unroll -+@opindex madjust-unroll -+Throttle unrolling to avoid thrashing target registers. -+This option only has an effect if the gcc code base supports the -+TARGET_ADJUST_UNROLL_MAX target hook. -+ -+@item -mindexed-addressing -+@opindex mindexed-addressing -+Enable the use of the indexed addressing mode for SHmedia32/SHcompact. -+This is only safe if the hardware and/or OS implement 32 bit wrap-around -+semantics for the indexed addressing mode. The architecture allows the -+implementation of processors with 64 bit MMU, which the OS could use to -+get 32 bit addressing, but since no current hardware implementation supports -+this or any other way to make the indexed addressing mode safe to use in -+the 32 bit ABI, the default is -mno-indexed-addressing. -+ -+@item -mgettrcost=@var{number} -+@opindex mgettrcost=@var{number} -+Set the cost assumed for the gettr instruction to @var{number}. -+The default is 2 if @option{-mpt-fixed} is in effect, 100 otherwise. -+ -+@item -mpt-fixed -+@opindex mpt-fixed -+Assume pt* instructions won't trap. This will generally generate better -+scheduled code, but is unsafe on current hardware. The current architecture -+definition says that ptabs and ptrel trap when the target anded with 3 is 3. -+This has the unintentional effect of making it unsafe to schedule ptabs / -+ptrel before a branch, or hoist it out of a loop. For example, -+__do_global_ctors, a part of libgcc that runs constructors at program -+startup, calls functions in a list which is delimited by @minus{}1. With the -+-mpt-fixed option, the ptabs will be done before testing against @minus{}1. -+That means that all the constructors will be run a bit quicker, but when -+the loop comes to the end of the list, the program crashes because ptabs -+loads @minus{}1 into a target register. Since this option is unsafe for any -+hardware implementing the current architecture specification, the default -+is -mno-pt-fixed. Unless the user specifies a specific cost with -+@option{-mgettrcost}, -mno-pt-fixed also implies @option{-mgettrcost=100}; -+this deters register allocation using target registers for storing -+ordinary integers. -+ -+@item -minvalid-symbols -+@opindex minvalid-symbols -+Assume symbols might be invalid. Ordinary function symbols generated by -+the compiler will always be valid to load with movi/shori/ptabs or -+movi/shori/ptrel, but with assembler and/or linker tricks it is possible -+to generate symbols that will cause ptabs / ptrel to trap. -+This option is only meaningful when @option{-mno-pt-fixed} is in effect. -+It will then prevent cross-basic-block cse, hoisting and most scheduling -+of symbol loads. The default is @option{-mno-invalid-symbols}. -+@end table -+ -+@node SPARC Options -+@subsection SPARC Options -+@cindex SPARC options -+ -+These @samp{-m} options are supported on the SPARC: -+ -+@table @gcctabopt -+@item -mno-app-regs -+@itemx -mapp-regs -+@opindex mno-app-regs -+@opindex mapp-regs -+Specify @option{-mapp-regs} to generate output using the global registers -+2 through 4, which the SPARC SVR4 ABI reserves for applications. This -+is the default. -+ -+To be fully SVR4 ABI compliant at the cost of some performance loss, -+specify @option{-mno-app-regs}. You should compile libraries and system -+software with this option. -+ -+@item -mfpu -+@itemx -mhard-float -+@opindex mfpu -+@opindex mhard-float -+Generate output containing floating point instructions. This is the -+default. -+ -+@item -mno-fpu -+@itemx -msoft-float -+@opindex mno-fpu -+@opindex msoft-float -+Generate output containing library calls for floating point. -+@strong{Warning:} the requisite libraries are not available for all SPARC -+targets. Normally the facilities of the machine's usual C compiler are -+used, but this cannot be done directly in cross-compilation. You must make -+your own arrangements to provide suitable library functions for -+cross-compilation. The embedded targets @samp{sparc-*-aout} and -+@samp{sparclite-*-*} do provide software floating point support. -+ -+@option{-msoft-float} changes the calling convention in the output file; -+therefore, it is only useful if you compile @emph{all} of a program with -+this option. In particular, you need to compile @file{libgcc.a}, the -+library that comes with GCC, with @option{-msoft-float} in order for -+this to work. -+ -+@item -mhard-quad-float -+@opindex mhard-quad-float -+Generate output containing quad-word (long double) floating point -+instructions. -+ -+@item -msoft-quad-float -+@opindex msoft-quad-float -+Generate output containing library calls for quad-word (long double) -+floating point instructions. The functions called are those specified -+in the SPARC ABI@. This is the default. -+ -+As of this writing, there are no SPARC implementations that have hardware -+support for the quad-word floating point instructions. They all invoke -+a trap handler for one of these instructions, and then the trap handler -+emulates the effect of the instruction. Because of the trap handler overhead, -+this is much slower than calling the ABI library routines. Thus the -+@option{-msoft-quad-float} option is the default. -+ -+@item -mno-unaligned-doubles -+@itemx -munaligned-doubles -+@opindex mno-unaligned-doubles -+@opindex munaligned-doubles -+Assume that doubles have 8 byte alignment. This is the default. -+ -+With @option{-munaligned-doubles}, GCC assumes that doubles have 8 byte -+alignment only if they are contained in another type, or if they have an -+absolute address. Otherwise, it assumes they have 4 byte alignment. -+Specifying this option avoids some rare compatibility problems with code -+generated by other compilers. It is not the default because it results -+in a performance loss, especially for floating point code. -+ -+@item -mno-faster-structs -+@itemx -mfaster-structs -+@opindex mno-faster-structs -+@opindex mfaster-structs -+With @option{-mfaster-structs}, the compiler assumes that structures -+should have 8 byte alignment. This enables the use of pairs of -+@code{ldd} and @code{std} instructions for copies in structure -+assignment, in place of twice as many @code{ld} and @code{st} pairs. -+However, the use of this changed alignment directly violates the SPARC -+ABI@. Thus, it's intended only for use on targets where the developer -+acknowledges that their resulting code will not be directly in line with -+the rules of the ABI@. -+ -+@item -mimpure-text -+@opindex mimpure-text -+@option{-mimpure-text}, used in addition to @option{-shared}, tells -+the compiler to not pass @option{-z text} to the linker when linking a -+shared object. Using this option, you can link position-dependent -+code into a shared object. -+ -+@option{-mimpure-text} suppresses the ``relocations remain against -+allocatable but non-writable sections'' linker error message. -+However, the necessary relocations will trigger copy-on-write, and the -+shared object is not actually shared across processes. Instead of -+using @option{-mimpure-text}, you should compile all source code with -+@option{-fpic} or @option{-fPIC}. -+ -+This option is only available on SunOS and Solaris. -+ -+@item -mcpu=@var{cpu_type} -+@opindex mcpu -+Set the instruction set, register set, and instruction scheduling parameters -+for machine type @var{cpu_type}. Supported values for @var{cpu_type} are -+@samp{v7}, @samp{cypress}, @samp{v8}, @samp{supersparc}, @samp{sparclite}, -+@samp{f930}, @samp{f934}, @samp{hypersparc}, @samp{sparclite86x}, -+@samp{sparclet}, @samp{tsc701}, @samp{v9}, @samp{ultrasparc}, -+@samp{ultrasparc3}, @samp{niagara} and @samp{niagara2}. -+ -+Default instruction scheduling parameters are used for values that select -+an architecture and not an implementation. These are @samp{v7}, @samp{v8}, -+@samp{sparclite}, @samp{sparclet}, @samp{v9}. -+ -+Here is a list of each supported architecture and their supported -+implementations. -+ -+@smallexample -+ v7: cypress -+ v8: supersparc, hypersparc -+ sparclite: f930, f934, sparclite86x -+ sparclet: tsc701 -+ v9: ultrasparc, ultrasparc3, niagara, niagara2 -+@end smallexample -+ -+By default (unless configured otherwise), GCC generates code for the V7 -+variant of the SPARC architecture. With @option{-mcpu=cypress}, the compiler -+additionally optimizes it for the Cypress CY7C602 chip, as used in the -+SPARCStation/SPARCServer 3xx series. This is also appropriate for the older -+SPARCStation 1, 2, IPX etc. -+ -+With @option{-mcpu=v8}, GCC generates code for the V8 variant of the SPARC -+architecture. The only difference from V7 code is that the compiler emits -+the integer multiply and integer divide instructions which exist in SPARC-V8 -+but not in SPARC-V7. With @option{-mcpu=supersparc}, the compiler additionally -+optimizes it for the SuperSPARC chip, as used in the SPARCStation 10, 1000 and -+2000 series. -+ -+With @option{-mcpu=sparclite}, GCC generates code for the SPARClite variant of -+the SPARC architecture. This adds the integer multiply, integer divide step -+and scan (@code{ffs}) instructions which exist in SPARClite but not in SPARC-V7. -+With @option{-mcpu=f930}, the compiler additionally optimizes it for the -+Fujitsu MB86930 chip, which is the original SPARClite, with no FPU@. With -+@option{-mcpu=f934}, the compiler additionally optimizes it for the Fujitsu -+MB86934 chip, which is the more recent SPARClite with FPU@. -+ -+With @option{-mcpu=sparclet}, GCC generates code for the SPARClet variant of -+the SPARC architecture. This adds the integer multiply, multiply/accumulate, -+integer divide step and scan (@code{ffs}) instructions which exist in SPARClet -+but not in SPARC-V7. With @option{-mcpu=tsc701}, the compiler additionally -+optimizes it for the TEMIC SPARClet chip. -+ -+With @option{-mcpu=v9}, GCC generates code for the V9 variant of the SPARC -+architecture. This adds 64-bit integer and floating-point move instructions, -+3 additional floating-point condition code registers and conditional move -+instructions. With @option{-mcpu=ultrasparc}, the compiler additionally -+optimizes it for the Sun UltraSPARC I/II/IIi chips. With -+@option{-mcpu=ultrasparc3}, the compiler additionally optimizes it for the -+Sun UltraSPARC III/III+/IIIi/IIIi+/IV/IV+ chips. With -+@option{-mcpu=niagara}, the compiler additionally optimizes it for -+Sun UltraSPARC T1 chips. With @option{-mcpu=niagara2}, the compiler -+additionally optimizes it for Sun UltraSPARC T2 chips. -+ -+@item -mtune=@var{cpu_type} -+@opindex mtune -+Set the instruction scheduling parameters for machine type -+@var{cpu_type}, but do not set the instruction set or register set that the -+option @option{-mcpu=@var{cpu_type}} would. -+ -+The same values for @option{-mcpu=@var{cpu_type}} can be used for -+@option{-mtune=@var{cpu_type}}, but the only useful values are those -+that select a particular cpu implementation. Those are @samp{cypress}, -+@samp{supersparc}, @samp{hypersparc}, @samp{f930}, @samp{f934}, -+@samp{sparclite86x}, @samp{tsc701}, @samp{ultrasparc}, -+@samp{ultrasparc3}, @samp{niagara}, and @samp{niagara2}. -+ -+@item -mv8plus -+@itemx -mno-v8plus -+@opindex mv8plus -+@opindex mno-v8plus -+With @option{-mv8plus}, GCC generates code for the SPARC-V8+ ABI@. The -+difference from the V8 ABI is that the global and out registers are -+considered 64-bit wide. This is enabled by default on Solaris in 32-bit -+mode for all SPARC-V9 processors. -+ -+@item -mvis -+@itemx -mno-vis -+@opindex mvis -+@opindex mno-vis -+With @option{-mvis}, GCC generates code that takes advantage of the UltraSPARC -+Visual Instruction Set extensions. The default is @option{-mno-vis}. -+@end table -+ -+These @samp{-m} options are supported in addition to the above -+on SPARC-V9 processors in 64-bit environments: -+ -+@table @gcctabopt -+@item -mlittle-endian -+@opindex mlittle-endian -+Generate code for a processor running in little-endian mode. It is only -+available for a few configurations and most notably not on Solaris and Linux. -+ -+@item -m32 -+@itemx -m64 -+@opindex m32 -+@opindex m64 -+Generate code for a 32-bit or 64-bit environment. -+The 32-bit environment sets int, long and pointer to 32 bits. -+The 64-bit environment sets int to 32 bits and long and pointer -+to 64 bits. -+ -+@item -mcmodel=medlow -+@opindex mcmodel=medlow -+Generate code for the Medium/Low code model: 64-bit addresses, programs -+must be linked in the low 32 bits of memory. Programs can be statically -+or dynamically linked. -+ -+@item -mcmodel=medmid -+@opindex mcmodel=medmid -+Generate code for the Medium/Middle code model: 64-bit addresses, programs -+must be linked in the low 44 bits of memory, the text and data segments must -+be less than 2GB in size and the data segment must be located within 2GB of -+the text segment. -+ -+@item -mcmodel=medany -+@opindex mcmodel=medany -+Generate code for the Medium/Anywhere code model: 64-bit addresses, programs -+may be linked anywhere in memory, the text and data segments must be less -+than 2GB in size and the data segment must be located within 2GB of the -+text segment. -+ -+@item -mcmodel=embmedany -+@opindex mcmodel=embmedany -+Generate code for the Medium/Anywhere code model for embedded systems: -+64-bit addresses, the text and data segments must be less than 2GB in -+size, both starting anywhere in memory (determined at link time). The -+global register %g4 points to the base of the data segment. Programs -+are statically linked and PIC is not supported. -+ -+@item -mstack-bias -+@itemx -mno-stack-bias -+@opindex mstack-bias -+@opindex mno-stack-bias -+With @option{-mstack-bias}, GCC assumes that the stack pointer, and -+frame pointer if present, are offset by @minus{}2047 which must be added back -+when making stack frame references. This is the default in 64-bit mode. -+Otherwise, assume no such offset is present. -+@end table -+ -+These switches are supported in addition to the above on Solaris: -+ -+@table @gcctabopt -+@item -threads -+@opindex threads -+Add support for multithreading using the Solaris threads library. This -+option sets flags for both the preprocessor and linker. This option does -+not affect the thread safety of object code produced by the compiler or -+that of libraries supplied with it. -+ -+@item -pthreads -+@opindex pthreads -+Add support for multithreading using the POSIX threads library. This -+option sets flags for both the preprocessor and linker. This option does -+not affect the thread safety of object code produced by the compiler or -+that of libraries supplied with it. -+ -+@item -pthread -+@opindex pthread -+This is a synonym for @option{-pthreads}. -+@end table -+ -+@node SPU Options -+@subsection SPU Options -+@cindex SPU options -+ -+These @samp{-m} options are supported on the SPU: -+ -+@table @gcctabopt -+@item -mwarn-reloc -+@itemx -merror-reloc -+@opindex mwarn-reloc -+@opindex merror-reloc -+ -+The loader for SPU does not handle dynamic relocations. By default, GCC -+will give an error when it generates code that requires a dynamic -+relocation. @option{-mno-error-reloc} disables the error, -+@option{-mwarn-reloc} will generate a warning instead. -+ -+@item -msafe-dma -+@itemx -munsafe-dma -+@opindex msafe-dma -+@opindex munsafe-dma -+ -+Instructions which initiate or test completion of DMA must not be -+reordered with respect to loads and stores of the memory which is being -+accessed. Users typically address this problem using the volatile -+keyword, but that can lead to inefficient code in places where the -+memory is known to not change. Rather than mark the memory as volatile -+we treat the DMA instructions as potentially effecting all memory. With -+@option{-munsafe-dma} users must use the volatile keyword to protect -+memory accesses. -+ -+@item -mbranch-hints -+@opindex mbranch-hints -+ -+By default, GCC will generate a branch hint instruction to avoid -+pipeline stalls for always taken or probably taken branches. A hint -+will not be generated closer than 8 instructions away from its branch. -+There is little reason to disable them, except for debugging purposes, -+or to make an object a little bit smaller. -+ -+@item -msmall-mem -+@itemx -mlarge-mem -+@opindex msmall-mem -+@opindex mlarge-mem -+ -+By default, GCC generates code assuming that addresses are never larger -+than 18 bits. With @option{-mlarge-mem} code is generated that assumes -+a full 32 bit address. -+ -+@item -mstdmain -+@opindex mstdmain -+ -+By default, GCC links against startup code that assumes the SPU-style -+main function interface (which has an unconventional parameter list). -+With @option{-mstdmain}, GCC will link your program against startup -+code that assumes a C99-style interface to @code{main}, including a -+local copy of @code{argv} strings. -+ -+@item -mfixed-range=@var{register-range} -+@opindex mfixed-range -+Generate code treating the given register range as fixed registers. -+A fixed register is one that the register allocator can not use. This is -+useful when compiling kernel code. A register range is specified as -+two registers separated by a dash. Multiple register ranges can be -+specified separated by a comma. -+ -+@item -mdual-nops -+@itemx -mdual-nops=@var{n} -+@opindex mdual-nops -+By default, GCC will insert nops to increase dual issue when it expects -+it to increase performance. @var{n} can be a value from 0 to 10. A -+smaller @var{n} will insert fewer nops. 10 is the default, 0 is the -+same as @option{-mno-dual-nops}. Disabled with @option{-Os}. -+ -+@item -mhint-max-nops=@var{n} -+@opindex mhint-max-nops -+Maximum number of nops to insert for a branch hint. A branch hint must -+be at least 8 instructions away from the branch it is effecting. GCC -+will insert up to @var{n} nops to enforce this, otherwise it will not -+generate the branch hint. -+ -+@item -mhint-max-distance=@var{n} -+@opindex mhint-max-distance -+The encoding of the branch hint instruction limits the hint to be within -+256 instructions of the branch it is effecting. By default, GCC makes -+sure it is within 125. -+ -+@item -msafe-hints -+@opindex msafe-hints -+Work around a hardware bug which causes the SPU to stall indefinitely. -+By default, GCC will insert the @code{hbrp} instruction to make sure -+this stall won't happen. -+ -+@end table -+ -+@node System V Options -+@subsection Options for System V -+ -+These additional options are available on System V Release 4 for -+compatibility with other compilers on those systems: -+ -+@table @gcctabopt -+@item -G -+@opindex G -+Create a shared object. -+It is recommended that @option{-symbolic} or @option{-shared} be used instead. -+ -+@item -Qy -+@opindex Qy -+Identify the versions of each tool used by the compiler, in a -+@code{.ident} assembler directive in the output. -+ -+@item -Qn -+@opindex Qn -+Refrain from adding @code{.ident} directives to the output file (this is -+the default). -+ -+@item -YP,@var{dirs} -+@opindex YP -+Search the directories @var{dirs}, and no others, for libraries -+specified with @option{-l}. -+ -+@item -Ym,@var{dir} -+@opindex Ym -+Look in the directory @var{dir} to find the M4 preprocessor. -+The assembler uses this option. -+@c This is supposed to go with a -Yd for predefined M4 macro files, but -+@c the generic assembler that comes with Solaris takes just -Ym. -+@end table -+ -+@node V850 Options -+@subsection V850 Options -+@cindex V850 Options -+ -+These @samp{-m} options are defined for V850 implementations: -+ -+@table @gcctabopt -+@item -mlong-calls -+@itemx -mno-long-calls -+@opindex mlong-calls -+@opindex mno-long-calls -+Treat all calls as being far away (near). If calls are assumed to be -+far away, the compiler will always load the functions address up into a -+register, and call indirect through the pointer. -+ -+@item -mno-ep -+@itemx -mep -+@opindex mno-ep -+@opindex mep -+Do not optimize (do optimize) basic blocks that use the same index -+pointer 4 or more times to copy pointer into the @code{ep} register, and -+use the shorter @code{sld} and @code{sst} instructions. The @option{-mep} -+option is on by default if you optimize. -+ -+@item -mno-prolog-function -+@itemx -mprolog-function -+@opindex mno-prolog-function -+@opindex mprolog-function -+Do not use (do use) external functions to save and restore registers -+at the prologue and epilogue of a function. The external functions -+are slower, but use less code space if more than one function saves -+the same number of registers. The @option{-mprolog-function} option -+is on by default if you optimize. -+ -+@item -mspace -+@opindex mspace -+Try to make the code as small as possible. At present, this just turns -+on the @option{-mep} and @option{-mprolog-function} options. -+ -+@item -mtda=@var{n} -+@opindex mtda -+Put static or global variables whose size is @var{n} bytes or less into -+the tiny data area that register @code{ep} points to. The tiny data -+area can hold up to 256 bytes in total (128 bytes for byte references). -+ -+@item -msda=@var{n} -+@opindex msda -+Put static or global variables whose size is @var{n} bytes or less into -+the small data area that register @code{gp} points to. The small data -+area can hold up to 64 kilobytes. -+ -+@item -mzda=@var{n} -+@opindex mzda -+Put static or global variables whose size is @var{n} bytes or less into -+the first 32 kilobytes of memory. -+ -+@item -mv850 -+@opindex mv850 -+Specify that the target processor is the V850. -+ -+@item -mbig-switch -+@opindex mbig-switch -+Generate code suitable for big switch tables. Use this option only if -+the assembler/linker complain about out of range branches within a switch -+table. -+ -+@item -mapp-regs -+@opindex mapp-regs -+This option will cause r2 and r5 to be used in the code generated by -+the compiler. This setting is the default. -+ -+@item -mno-app-regs -+@opindex mno-app-regs -+This option will cause r2 and r5 to be treated as fixed registers. -+ -+@item -mv850e1 -+@opindex mv850e1 -+Specify that the target processor is the V850E1. The preprocessor -+constants @samp{__v850e1__} and @samp{__v850e__} will be defined if -+this option is used. -+ -+@item -mv850e -+@opindex mv850e -+Specify that the target processor is the V850E@. The preprocessor -+constant @samp{__v850e__} will be defined if this option is used. -+ -+If neither @option{-mv850} nor @option{-mv850e} nor @option{-mv850e1} -+are defined then a default target processor will be chosen and the -+relevant @samp{__v850*__} preprocessor constant will be defined. -+ -+The preprocessor constants @samp{__v850} and @samp{__v851__} are always -+defined, regardless of which processor variant is the target. -+ -+@item -mdisable-callt -+@opindex mdisable-callt -+This option will suppress generation of the CALLT instruction for the -+v850e and v850e1 flavors of the v850 architecture. The default is -+@option{-mno-disable-callt} which allows the CALLT instruction to be used. -+ -+@end table -+ -+@node VAX Options -+@subsection VAX Options -+@cindex VAX options -+ -+These @samp{-m} options are defined for the VAX: -+ -+@table @gcctabopt -+@item -munix -+@opindex munix -+Do not output certain jump instructions (@code{aobleq} and so on) -+that the Unix assembler for the VAX cannot handle across long -+ranges. -+ -+@item -mgnu -+@opindex mgnu -+Do output those jump instructions, on the assumption that you -+will assemble with the GNU assembler. -+ -+@item -mg -+@opindex mg -+Output code for g-format floating point numbers instead of d-format. -+@end table -+ -+@node VxWorks Options -+@subsection VxWorks Options -+@cindex VxWorks Options -+ -+The options in this section are defined for all VxWorks targets. -+Options specific to the target hardware are listed with the other -+options for that target. -+ -+@table @gcctabopt -+@item -mrtp -+@opindex mrtp -+GCC can generate code for both VxWorks kernels and real time processes -+(RTPs). This option switches from the former to the latter. It also -+defines the preprocessor macro @code{__RTP__}. -+ -+@item -non-static -+@opindex non-static -+Link an RTP executable against shared libraries rather than static -+libraries. The options @option{-static} and @option{-shared} can -+also be used for RTPs (@pxref{Link Options}); @option{-static} -+is the default. -+ -+@item -Bstatic -+@itemx -Bdynamic -+@opindex Bstatic -+@opindex Bdynamic -+These options are passed down to the linker. They are defined for -+compatibility with Diab. -+ -+@item -Xbind-lazy -+@opindex Xbind-lazy -+Enable lazy binding of function calls. This option is equivalent to -+@option{-Wl,-z,now} and is defined for compatibility with Diab. -+ -+@item -Xbind-now -+@opindex Xbind-now -+Disable lazy binding of function calls. This option is the default and -+is defined for compatibility with Diab. -+@end table -+ -+@node x86-64 Options -+@subsection x86-64 Options -+@cindex x86-64 options -+ -+These are listed under @xref{i386 and x86-64 Options}. -+ -+@node i386 and x86-64 Windows Options -+@subsection i386 and x86-64 Windows Options -+@cindex i386 and x86-64 Windows Options -+ -+These additional options are available for Windows targets: -+ -+@table @gcctabopt -+@item -mconsole -+@opindex mconsole -+This option is available for Cygwin and MinGW targets. It -+specifies that a console application is to be generated, by -+instructing the linker to set the PE header subsystem type -+required for console applications. -+This is the default behaviour for Cygwin and MinGW targets. -+ -+@item -mcygwin -+@opindex mcygwin -+This option is available for Cygwin targets. It specifies that -+the Cygwin internal interface is to be used for predefined -+preprocessor macros, C runtime libraries and related linker -+paths and options. For Cygwin targets this is the default behaviour. -+This option is deprecated and will be removed in a future release. -+ -+@item -mno-cygwin -+@opindex mno-cygwin -+This option is available for Cygwin targets. It specifies that -+the MinGW internal interface is to be used instead of Cygwin's, by -+setting MinGW-related predefined macros and linker paths and default -+library options. -+This option is deprecated and will be removed in a future release. -+ -+@item -mdll -+@opindex mdll -+This option is available for Cygwin and MinGW targets. It -+specifies that a DLL - a dynamic link library - is to be -+generated, enabling the selection of the required runtime -+startup object and entry point. -+ -+@item -mnop-fun-dllimport -+@opindex mnop-fun-dllimport -+This option is available for Cygwin and MinGW targets. It -+specifies that the dllimport attribute should be ignored. -+ -+@item -mthread -+@opindex mthread -+This option is available for MinGW targets. It specifies -+that MinGW-specific thread support is to be used. -+ -+@item -mwin32 -+@opindex mwin32 -+This option is available for Cygwin and MinGW targets. It -+specifies that the typical Windows pre-defined macros are to -+be set in the pre-processor, but does not influence the choice -+of runtime library/startup code. -+ -+@item -mwindows -+@opindex mwindows -+This option is available for Cygwin and MinGW targets. It -+specifies that a GUI application is to be generated by -+instructing the linker to set the PE header subsystem type -+appropriately. -+@end table -+ -+See also under @ref{i386 and x86-64 Options} for standard options. -+ -+@node Xstormy16 Options -+@subsection Xstormy16 Options -+@cindex Xstormy16 Options -+ -+These options are defined for Xstormy16: -+ -+@table @gcctabopt -+@item -msim -+@opindex msim -+Choose startup files and linker script suitable for the simulator. -+@end table -+ -+@node Xtensa Options -+@subsection Xtensa Options -+@cindex Xtensa Options -+ -+These options are supported for Xtensa targets: -+ -+@table @gcctabopt -+@item -mconst16 -+@itemx -mno-const16 -+@opindex mconst16 -+@opindex mno-const16 -+Enable or disable use of @code{CONST16} instructions for loading -+constant values. The @code{CONST16} instruction is currently not a -+standard option from Tensilica. When enabled, @code{CONST16} -+instructions are always used in place of the standard @code{L32R} -+instructions. The use of @code{CONST16} is enabled by default only if -+the @code{L32R} instruction is not available. -+ -+@item -mfused-madd -+@itemx -mno-fused-madd -+@opindex mfused-madd -+@opindex mno-fused-madd -+Enable or disable use of fused multiply/add and multiply/subtract -+instructions in the floating-point option. This has no effect if the -+floating-point option is not also enabled. Disabling fused multiply/add -+and multiply/subtract instructions forces the compiler to use separate -+instructions for the multiply and add/subtract operations. This may be -+desirable in some cases where strict IEEE 754-compliant results are -+required: the fused multiply add/subtract instructions do not round the -+intermediate result, thereby producing results with @emph{more} bits of -+precision than specified by the IEEE standard. Disabling fused multiply -+add/subtract instructions also ensures that the program output is not -+sensitive to the compiler's ability to combine multiply and add/subtract -+operations. -+ -+@item -mserialize-volatile -+@itemx -mno-serialize-volatile -+@opindex mserialize-volatile -+@opindex mno-serialize-volatile -+When this option is enabled, GCC inserts @code{MEMW} instructions before -+@code{volatile} memory references to guarantee sequential consistency. -+The default is @option{-mserialize-volatile}. Use -+@option{-mno-serialize-volatile} to omit the @code{MEMW} instructions. -+ -+@item -mtext-section-literals -+@itemx -mno-text-section-literals -+@opindex mtext-section-literals -+@opindex mno-text-section-literals -+Control the treatment of literal pools. The default is -+@option{-mno-text-section-literals}, which places literals in a separate -+section in the output file. This allows the literal pool to be placed -+in a data RAM/ROM, and it also allows the linker to combine literal -+pools from separate object files to remove redundant literals and -+improve code size. With @option{-mtext-section-literals}, the literals -+are interspersed in the text section in order to keep them as close as -+possible to their references. This may be necessary for large assembly -+files. -+ -+@item -mtarget-align -+@itemx -mno-target-align -+@opindex mtarget-align -+@opindex mno-target-align -+When this option is enabled, GCC instructs the assembler to -+automatically align instructions to reduce branch penalties at the -+expense of some code density. The assembler attempts to widen density -+instructions to align branch targets and the instructions following call -+instructions. If there are not enough preceding safe density -+instructions to align a target, no widening will be performed. The -+default is @option{-mtarget-align}. These options do not affect the -+treatment of auto-aligned instructions like @code{LOOP}, which the -+assembler will always align, either by widening density instructions or -+by inserting no-op instructions. -+ -+@item -mlongcalls -+@itemx -mno-longcalls -+@opindex mlongcalls -+@opindex mno-longcalls -+When this option is enabled, GCC instructs the assembler to translate -+direct calls to indirect calls unless it can determine that the target -+of a direct call is in the range allowed by the call instruction. This -+translation typically occurs for calls to functions in other source -+files. Specifically, the assembler translates a direct @code{CALL} -+instruction into an @code{L32R} followed by a @code{CALLX} instruction. -+The default is @option{-mno-longcalls}. This option should be used in -+programs where the call target can potentially be out of range. This -+option is implemented in the assembler, not the compiler, so the -+assembly code generated by GCC will still show direct call -+instructions---look at the disassembled object code to see the actual -+instructions. Note that the assembler will use an indirect call for -+every cross-file call, not just those that really will be out of range. -+@end table -+ -+@node zSeries Options -+@subsection zSeries Options -+@cindex zSeries options -+ -+These are listed under @xref{S/390 and zSeries Options}. -+ -+@node Code Gen Options -+@section Options for Code Generation Conventions -+@cindex code generation conventions -+@cindex options, code generation -+@cindex run-time options -+ -+These machine-independent options control the interface conventions -+used in code generation. -+ -+Most of them have both positive and negative forms; the negative form -+of @option{-ffoo} would be @option{-fno-foo}. In the table below, only -+one of the forms is listed---the one which is not the default. You -+can figure out the other form by either removing @samp{no-} or adding -+it. -+ -+@table @gcctabopt -+@item -fbounds-check -+@opindex fbounds-check -+For front-ends that support it, generate additional code to check that -+indices used to access arrays are within the declared range. This is -+currently only supported by the Java and Fortran front-ends, where -+this option defaults to true and false respectively. -+ -+@item -ftrapv -+@opindex ftrapv -+This option generates traps for signed overflow on addition, subtraction, -+multiplication operations. -+ -+@item -fwrapv -+@opindex fwrapv -+This option instructs the compiler to assume that signed arithmetic -+overflow of addition, subtraction and multiplication wraps around -+using twos-complement representation. This flag enables some optimizations -+and disables others. This option is enabled by default for the Java -+front-end, as required by the Java language specification. -+ -+@item -fexceptions -+@opindex fexceptions -+Enable exception handling. Generates extra code needed to propagate -+exceptions. For some targets, this implies GCC will generate frame -+unwind information for all functions, which can produce significant data -+size overhead, although it does not affect execution. If you do not -+specify this option, GCC will enable it by default for languages like -+C++ which normally require exception handling, and disable it for -+languages like C that do not normally require it. However, you may need -+to enable this option when compiling C code that needs to interoperate -+properly with exception handlers written in C++. You may also wish to -+disable this option if you are compiling older C++ programs that don't -+use exception handling. -+ -+@item -fnon-call-exceptions -+@opindex fnon-call-exceptions -+Generate code that allows trapping instructions to throw exceptions. -+Note that this requires platform-specific runtime support that does -+not exist everywhere. Moreover, it only allows @emph{trapping} -+instructions to throw exceptions, i.e.@: memory references or floating -+point instructions. It does not allow exceptions to be thrown from -+arbitrary signal handlers such as @code{SIGALRM}. -+ -+@item -funwind-tables -+@opindex funwind-tables -+Similar to @option{-fexceptions}, except that it will just generate any needed -+static data, but will not affect the generated code in any other way. -+You will normally not enable this option; instead, a language processor -+that needs this handling would enable it on your behalf. -+ -+@item -fasynchronous-unwind-tables -+@opindex fasynchronous-unwind-tables -+Generate unwind table in dwarf2 format, if supported by target machine. The -+table is exact at each instruction boundary, so it can be used for stack -+unwinding from asynchronous events (such as debugger or garbage collector). -+ -+@item -fpcc-struct-return -+@opindex fpcc-struct-return -+Return ``short'' @code{struct} and @code{union} values in memory like -+longer ones, rather than in registers. This convention is less -+efficient, but it has the advantage of allowing intercallability between -+GCC-compiled files and files compiled with other compilers, particularly -+the Portable C Compiler (pcc). -+ -+The precise convention for returning structures in memory depends -+on the target configuration macros. -+ -+Short structures and unions are those whose size and alignment match -+that of some integer type. -+ -+@strong{Warning:} code compiled with the @option{-fpcc-struct-return} -+switch is not binary compatible with code compiled with the -+@option{-freg-struct-return} switch. -+Use it to conform to a non-default application binary interface. -+ -+@item -freg-struct-return -+@opindex freg-struct-return -+Return @code{struct} and @code{union} values in registers when possible. -+This is more efficient for small structures than -+@option{-fpcc-struct-return}. -+ -+If you specify neither @option{-fpcc-struct-return} nor -+@option{-freg-struct-return}, GCC defaults to whichever convention is -+standard for the target. If there is no standard convention, GCC -+defaults to @option{-fpcc-struct-return}, except on targets where GCC is -+the principal compiler. In those cases, we can choose the standard, and -+we chose the more efficient register return alternative. -+ -+@strong{Warning:} code compiled with the @option{-freg-struct-return} -+switch is not binary compatible with code compiled with the -+@option{-fpcc-struct-return} switch. -+Use it to conform to a non-default application binary interface. -+ -+@item -fshort-enums -+@opindex fshort-enums -+Allocate to an @code{enum} type only as many bytes as it needs for the -+declared range of possible values. Specifically, the @code{enum} type -+will be equivalent to the smallest integer type which has enough room. -+ -+@strong{Warning:} the @option{-fshort-enums} switch causes GCC to generate -+code that is not binary compatible with code generated without that switch. -+Use it to conform to a non-default application binary interface. -+ -+@item -fshort-double -+@opindex fshort-double -+Use the same size for @code{double} as for @code{float}. -+ -+@strong{Warning:} the @option{-fshort-double} switch causes GCC to generate -+code that is not binary compatible with code generated without that switch. -+Use it to conform to a non-default application binary interface. -+ -+@item -fshort-wchar -+@opindex fshort-wchar -+Override the underlying type for @samp{wchar_t} to be @samp{short -+unsigned int} instead of the default for the target. This option is -+useful for building programs to run under WINE@. -+ -+@strong{Warning:} the @option{-fshort-wchar} switch causes GCC to generate -+code that is not binary compatible with code generated without that switch. -+Use it to conform to a non-default application binary interface. -+ -+@item -fno-common -+@opindex fno-common -+In C code, controls the placement of uninitialized global variables. -+Unix C compilers have traditionally permitted multiple definitions of -+such variables in different compilation units by placing the variables -+in a common block. -+This is the behavior specified by @option{-fcommon}, and is the default -+for GCC on most targets. -+On the other hand, this behavior is not required by ISO C, and on some -+targets may carry a speed or code size penalty on variable references. -+The @option{-fno-common} option specifies that the compiler should place -+uninitialized global variables in the data section of the object file, -+rather than generating them as common blocks. -+This has the effect that if the same variable is declared -+(without @code{extern}) in two different compilations, -+you will get a multiple-definition error when you link them. -+In this case, you must compile with @option{-fcommon} instead. -+Compiling with @option{-fno-common} is useful on targets for which -+it provides better performance, or if you wish to verify that the -+program will work on other systems which always treat uninitialized -+variable declarations this way. -+ -+@item -fno-ident -+@opindex fno-ident -+Ignore the @samp{#ident} directive. -+ -+@item -finhibit-size-directive -+@opindex finhibit-size-directive -+Don't output a @code{.size} assembler directive, or anything else that -+would cause trouble if the function is split in the middle, and the -+two halves are placed at locations far apart in memory. This option is -+used when compiling @file{crtstuff.c}; you should not need to use it -+for anything else. -+ -+@item -fverbose-asm -+@opindex fverbose-asm -+Put extra commentary information in the generated assembly code to -+make it more readable. This option is generally only of use to those -+who actually need to read the generated assembly code (perhaps while -+debugging the compiler itself). -+ -+@option{-fno-verbose-asm}, the default, causes the -+extra information to be omitted and is useful when comparing two assembler -+files. -+ -+@item -frecord-gcc-switches -+@opindex frecord-gcc-switches -+This switch causes the command line that was used to invoke the -+compiler to be recorded into the object file that is being created. -+This switch is only implemented on some targets and the exact format -+of the recording is target and binary file format dependent, but it -+usually takes the form of a section containing ASCII text. This -+switch is related to the @option{-fverbose-asm} switch, but that -+switch only records information in the assembler output file as -+comments, so it never reaches the object file. -+ -+@item -fpic -+@opindex fpic -+@cindex global offset table -+@cindex PIC -+Generate position-independent code (PIC) suitable for use in a shared -+library, if supported for the target machine. Such code accesses all -+constant addresses through a global offset table (GOT)@. The dynamic -+loader resolves the GOT entries when the program starts (the dynamic -+loader is not part of GCC; it is part of the operating system). If -+the GOT size for the linked executable exceeds a machine-specific -+maximum size, you get an error message from the linker indicating that -+@option{-fpic} does not work; in that case, recompile with @option{-fPIC} -+instead. (These maximums are 8k on the SPARC and 32k -+on the m68k and RS/6000. The 386 has no such limit.) -+ -+Position-independent code requires special support, and therefore works -+only on certain machines. For the 386, GCC supports PIC for System V -+but not for the Sun 386i. Code generated for the IBM RS/6000 is always -+position-independent. -+ -+When this flag is set, the macros @code{__pic__} and @code{__PIC__} -+are defined to 1. -+ -+@item -fPIC -+@opindex fPIC -+If supported for the target machine, emit position-independent code, -+suitable for dynamic linking and avoiding any limit on the size of the -+global offset table. This option makes a difference on the m68k, -+PowerPC and SPARC@. -+ -+Position-independent code requires special support, and therefore works -+only on certain machines. -+ -+When this flag is set, the macros @code{__pic__} and @code{__PIC__} -+are defined to 2. -+ -+@item -fpie -+@itemx -fPIE -+@opindex fpie -+@opindex fPIE -+These options are similar to @option{-fpic} and @option{-fPIC}, but -+generated position independent code can be only linked into executables. -+Usually these options are used when @option{-pie} GCC option will be -+used during linking. -+ -+@option{-fpie} and @option{-fPIE} both define the macros -+@code{__pie__} and @code{__PIE__}. The macros have the value 1 -+for @option{-fpie} and 2 for @option{-fPIE}. -+ -+@item -fno-jump-tables -+@opindex fno-jump-tables -+Do not use jump tables for switch statements even where it would be -+more efficient than other code generation strategies. This option is -+of use in conjunction with @option{-fpic} or @option{-fPIC} for -+building code which forms part of a dynamic linker and cannot -+reference the address of a jump table. On some targets, jump tables -+do not require a GOT and this option is not needed. -+ -+@item -ffixed-@var{reg} -+@opindex ffixed -+Treat the register named @var{reg} as a fixed register; generated code -+should never refer to it (except perhaps as a stack pointer, frame -+pointer or in some other fixed role). -+ -+@var{reg} must be the name of a register. The register names accepted -+are machine-specific and are defined in the @code{REGISTER_NAMES} -+macro in the machine description macro file. -+ -+This flag does not have a negative form, because it specifies a -+three-way choice. -+ -+@item -fcall-used-@var{reg} -+@opindex fcall-used -+Treat the register named @var{reg} as an allocable register that is -+clobbered by function calls. It may be allocated for temporaries or -+variables that do not live across a call. Functions compiled this way -+will not save and restore the register @var{reg}. -+ -+It is an error to used this flag with the frame pointer or stack pointer. -+Use of this flag for other registers that have fixed pervasive roles in -+the machine's execution model will produce disastrous results. -+ -+This flag does not have a negative form, because it specifies a -+three-way choice. -+ -+@item -fcall-saved-@var{reg} -+@opindex fcall-saved -+Treat the register named @var{reg} as an allocable register saved by -+functions. It may be allocated even for temporaries or variables that -+live across a call. Functions compiled this way will save and restore -+the register @var{reg} if they use it. -+ -+It is an error to used this flag with the frame pointer or stack pointer. -+Use of this flag for other registers that have fixed pervasive roles in -+the machine's execution model will produce disastrous results. -+ -+A different sort of disaster will result from the use of this flag for -+a register in which function values may be returned. -+ -+This flag does not have a negative form, because it specifies a -+three-way choice. -+ -+@item -fpack-struct[=@var{n}] -+@opindex fpack-struct -+Without a value specified, pack all structure members together without -+holes. When a value is specified (which must be a small power of two), pack -+structure members according to this value, representing the maximum -+alignment (that is, objects with default alignment requirements larger than -+this will be output potentially unaligned at the next fitting location. -+ -+@strong{Warning:} the @option{-fpack-struct} switch causes GCC to generate -+code that is not binary compatible with code generated without that switch. -+Additionally, it makes the code suboptimal. -+Use it to conform to a non-default application binary interface. -+ -+@item -finstrument-functions -+@opindex finstrument-functions -+Generate instrumentation calls for entry and exit to functions. Just -+after function entry and just before function exit, the following -+profiling functions will be called with the address of the current -+function and its call site. (On some platforms, -+@code{__builtin_return_address} does not work beyond the current -+function, so the call site information may not be available to the -+profiling functions otherwise.) -+ -+@smallexample -+void __cyg_profile_func_enter (void *this_fn, -+ void *call_site); -+void __cyg_profile_func_exit (void *this_fn, -+ void *call_site); -+@end smallexample -+ -+The first argument is the address of the start of the current function, -+which may be looked up exactly in the symbol table. -+ -+This instrumentation is also done for functions expanded inline in other -+functions. The profiling calls will indicate where, conceptually, the -+inline function is entered and exited. This means that addressable -+versions of such functions must be available. If all your uses of a -+function are expanded inline, this may mean an additional expansion of -+code size. If you use @samp{extern inline} in your C code, an -+addressable version of such functions must be provided. (This is -+normally the case anyways, but if you get lucky and the optimizer always -+expands the functions inline, you might have gotten away without -+providing static copies.) -+ -+A function may be given the attribute @code{no_instrument_function}, in -+which case this instrumentation will not be done. This can be used, for -+example, for the profiling functions listed above, high-priority -+interrupt routines, and any functions from which the profiling functions -+cannot safely be called (perhaps signal handlers, if the profiling -+routines generate output or allocate memory). -+ -+@item -finstrument-functions-exclude-file-list=@var{file},@var{file},@dots{} -+@opindex finstrument-functions-exclude-file-list -+ -+Set the list of functions that are excluded from instrumentation (see -+the description of @code{-finstrument-functions}). If the file that -+contains a function definition matches with one of @var{file}, then -+that function is not instrumented. The match is done on substrings: -+if the @var{file} parameter is a substring of the file name, it is -+considered to be a match. -+ -+For example, -+@code{-finstrument-functions-exclude-file-list=/bits/stl,include/sys} -+will exclude any inline function defined in files whose pathnames -+contain @code{/bits/stl} or @code{include/sys}. -+ -+If, for some reason, you want to include letter @code{','} in one of -+@var{sym}, write @code{'\,'}. For example, -+@code{-finstrument-functions-exclude-file-list='\,\,tmp'} -+(note the single quote surrounding the option). -+ -+@item -finstrument-functions-exclude-function-list=@var{sym},@var{sym},@dots{} -+@opindex finstrument-functions-exclude-function-list -+ -+This is similar to @code{-finstrument-functions-exclude-file-list}, -+but this option sets the list of function names to be excluded from -+instrumentation. The function name to be matched is its user-visible -+name, such as @code{vector<int> blah(const vector<int> &)}, not the -+internal mangled name (e.g., @code{_Z4blahRSt6vectorIiSaIiEE}). The -+match is done on substrings: if the @var{sym} parameter is a substring -+of the function name, it is considered to be a match. -+ -+@item -fstack-check -+@opindex fstack-check -+Generate code to verify that you do not go beyond the boundary of the -+stack. You should specify this flag if you are running in an -+environment with multiple threads, but only rarely need to specify it in -+a single-threaded environment since stack overflow is automatically -+detected on nearly all systems if there is only one stack. -+ -+Note that this switch does not actually cause checking to be done; the -+operating system or the language runtime must do that. The switch causes -+generation of code to ensure that they see the stack being extended. -+ -+You can additionally specify a string parameter: @code{no} means no -+checking, @code{generic} means force the use of old-style checking, -+@code{specific} means use the best checking method and is equivalent -+to bare @option{-fstack-check}. -+ -+Old-style checking is a generic mechanism that requires no specific -+target support in the compiler but comes with the following drawbacks: -+ -+@enumerate -+@item -+Modified allocation strategy for large objects: they will always be -+allocated dynamically if their size exceeds a fixed threshold. -+ -+@item -+Fixed limit on the size of the static frame of functions: when it is -+topped by a particular function, stack checking is not reliable and -+a warning is issued by the compiler. -+ -+@item -+Inefficiency: because of both the modified allocation strategy and the -+generic implementation, the performances of the code are hampered. -+@end enumerate -+ -+Note that old-style stack checking is also the fallback method for -+@code{specific} if no target support has been added in the compiler. -+ -+@item -fstack-limit-register=@var{reg} -+@itemx -fstack-limit-symbol=@var{sym} -+@itemx -fno-stack-limit -+@opindex fstack-limit-register -+@opindex fstack-limit-symbol -+@opindex fno-stack-limit -+Generate code to ensure that the stack does not grow beyond a certain value, -+either the value of a register or the address of a symbol. If the stack -+would grow beyond the value, a signal is raised. For most targets, -+the signal is raised before the stack overruns the boundary, so -+it is possible to catch the signal without taking special precautions. -+ -+For instance, if the stack starts at absolute address @samp{0x80000000} -+and grows downwards, you can use the flags -+@option{-fstack-limit-symbol=__stack_limit} and -+@option{-Wl,--defsym,__stack_limit=0x7ffe0000} to enforce a stack limit -+of 128KB@. Note that this may only work with the GNU linker. -+ -+@cindex aliasing of parameters -+@cindex parameters, aliased -+@item -fargument-alias -+@itemx -fargument-noalias -+@itemx -fargument-noalias-global -+@itemx -fargument-noalias-anything -+@opindex fargument-alias -+@opindex fargument-noalias -+@opindex fargument-noalias-global -+@opindex fargument-noalias-anything -+Specify the possible relationships among parameters and between -+parameters and global data. -+ -+@option{-fargument-alias} specifies that arguments (parameters) may -+alias each other and may alias global storage.@* -+@option{-fargument-noalias} specifies that arguments do not alias -+each other, but may alias global storage.@* -+@option{-fargument-noalias-global} specifies that arguments do not -+alias each other and do not alias global storage. -+@option{-fargument-noalias-anything} specifies that arguments do not -+alias any other storage. -+ -+Each language will automatically use whatever option is required by -+the language standard. You should not need to use these options yourself. -+ -+@item -fleading-underscore -+@opindex fleading-underscore -+This option and its counterpart, @option{-fno-leading-underscore}, forcibly -+change the way C symbols are represented in the object file. One use -+is to help link with legacy assembly code. -+ -+@strong{Warning:} the @option{-fleading-underscore} switch causes GCC to -+generate code that is not binary compatible with code generated without that -+switch. Use it to conform to a non-default application binary interface. -+Not all targets provide complete support for this switch. -+ -+@item -ftls-model=@var{model} -+@opindex ftls-model -+Alter the thread-local storage model to be used (@pxref{Thread-Local}). -+The @var{model} argument should be one of @code{global-dynamic}, -+@code{local-dynamic}, @code{initial-exec} or @code{local-exec}. -+ -+The default without @option{-fpic} is @code{initial-exec}; with -+@option{-fpic} the default is @code{global-dynamic}. -+ -+@item -fvisibility=@var{default|internal|hidden|protected} -+@opindex fvisibility -+Set the default ELF image symbol visibility to the specified option---all -+symbols will be marked with this unless overridden within the code. -+Using this feature can very substantially improve linking and -+load times of shared object libraries, produce more optimized -+code, provide near-perfect API export and prevent symbol clashes. -+It is @strong{strongly} recommended that you use this in any shared objects -+you distribute. -+ -+Despite the nomenclature, @code{default} always means public ie; -+available to be linked against from outside the shared object. -+@code{protected} and @code{internal} are pretty useless in real-world -+usage so the only other commonly used option will be @code{hidden}. -+The default if @option{-fvisibility} isn't specified is -+@code{default}, i.e., make every -+symbol public---this causes the same behavior as previous versions of -+GCC@. -+ -+A good explanation of the benefits offered by ensuring ELF -+symbols have the correct visibility is given by ``How To Write -+Shared Libraries'' by Ulrich Drepper (which can be found at -+@w{@uref{http://people.redhat.com/~drepper/}})---however a superior -+solution made possible by this option to marking things hidden when -+the default is public is to make the default hidden and mark things -+public. This is the norm with DLL's on Windows and with @option{-fvisibility=hidden} -+and @code{__attribute__ ((visibility("default")))} instead of -+@code{__declspec(dllexport)} you get almost identical semantics with -+identical syntax. This is a great boon to those working with -+cross-platform projects. -+ -+For those adding visibility support to existing code, you may find -+@samp{#pragma GCC visibility} of use. This works by you enclosing -+the declarations you wish to set visibility for with (for example) -+@samp{#pragma GCC visibility push(hidden)} and -+@samp{#pragma GCC visibility pop}. -+Bear in mind that symbol visibility should be viewed @strong{as -+part of the API interface contract} and thus all new code should -+always specify visibility when it is not the default ie; declarations -+only for use within the local DSO should @strong{always} be marked explicitly -+as hidden as so to avoid PLT indirection overheads---making this -+abundantly clear also aids readability and self-documentation of the code. -+Note that due to ISO C++ specification requirements, operator new and -+operator delete must always be of default visibility. -+ -+Be aware that headers from outside your project, in particular system -+headers and headers from any other library you use, may not be -+expecting to be compiled with visibility other than the default. You -+may need to explicitly say @samp{#pragma GCC visibility push(default)} -+before including any such headers. -+ -+@samp{extern} declarations are not affected by @samp{-fvisibility}, so -+a lot of code can be recompiled with @samp{-fvisibility=hidden} with -+no modifications. However, this means that calls to @samp{extern} -+functions with no explicit visibility will use the PLT, so it is more -+effective to use @samp{__attribute ((visibility))} and/or -+@samp{#pragma GCC visibility} to tell the compiler which @samp{extern} -+declarations should be treated as hidden. -+ -+Note that @samp{-fvisibility} does affect C++ vague linkage -+entities. This means that, for instance, an exception class that will -+be thrown between DSOs must be explicitly marked with default -+visibility so that the @samp{type_info} nodes will be unified between -+the DSOs. -+ -+An overview of these techniques, their benefits and how to use them -+is at @w{@uref{http://gcc.gnu.org/wiki/Visibility}}. -+ -+@end table -+ -+@c man end -+ -+@node Environment Variables -+@section Environment Variables Affecting GCC -+@cindex environment variables -+ -+@c man begin ENVIRONMENT -+This section describes several environment variables that affect how GCC -+operates. Some of them work by specifying directories or prefixes to use -+when searching for various kinds of files. Some are used to specify other -+aspects of the compilation environment. -+ -+Note that you can also specify places to search using options such as -+@option{-B}, @option{-I} and @option{-L} (@pxref{Directory Options}). These -+take precedence over places specified using environment variables, which -+in turn take precedence over those specified by the configuration of GCC@. -+@xref{Driver,, Controlling the Compilation Driver @file{gcc}, gccint, -+GNU Compiler Collection (GCC) Internals}. -+ -+@table @env -+@item LANG -+@itemx LC_CTYPE -+@c @itemx LC_COLLATE -+@itemx LC_MESSAGES -+@c @itemx LC_MONETARY -+@c @itemx LC_NUMERIC -+@c @itemx LC_TIME -+@itemx LC_ALL -+@findex LANG -+@findex LC_CTYPE -+@c @findex LC_COLLATE -+@findex LC_MESSAGES -+@c @findex LC_MONETARY -+@c @findex LC_NUMERIC -+@c @findex LC_TIME -+@findex LC_ALL -+@cindex locale -+These environment variables control the way that GCC uses -+localization information that allow GCC to work with different -+national conventions. GCC inspects the locale categories -+@env{LC_CTYPE} and @env{LC_MESSAGES} if it has been configured to do -+so. These locale categories can be set to any value supported by your -+installation. A typical value is @samp{en_GB.UTF-8} for English in the United -+Kingdom encoded in UTF-8. -+ -+The @env{LC_CTYPE} environment variable specifies character -+classification. GCC uses it to determine the character boundaries in -+a string; this is needed for some multibyte encodings that contain quote -+and escape characters that would otherwise be interpreted as a string -+end or escape. -+ -+The @env{LC_MESSAGES} environment variable specifies the language to -+use in diagnostic messages. -+ -+If the @env{LC_ALL} environment variable is set, it overrides the value -+of @env{LC_CTYPE} and @env{LC_MESSAGES}; otherwise, @env{LC_CTYPE} -+and @env{LC_MESSAGES} default to the value of the @env{LANG} -+environment variable. If none of these variables are set, GCC -+defaults to traditional C English behavior. -+ -+@item TMPDIR -+@findex TMPDIR -+If @env{TMPDIR} is set, it specifies the directory to use for temporary -+files. GCC uses temporary files to hold the output of one stage of -+compilation which is to be used as input to the next stage: for example, -+the output of the preprocessor, which is the input to the compiler -+proper. -+ -+@item GCC_EXEC_PREFIX -+@findex GCC_EXEC_PREFIX -+If @env{GCC_EXEC_PREFIX} is set, it specifies a prefix to use in the -+names of the subprograms executed by the compiler. No slash is added -+when this prefix is combined with the name of a subprogram, but you can -+specify a prefix that ends with a slash if you wish. -+ -+If @env{GCC_EXEC_PREFIX} is not set, GCC will attempt to figure out -+an appropriate prefix to use based on the pathname it was invoked with. -+ -+If GCC cannot find the subprogram using the specified prefix, it -+tries looking in the usual places for the subprogram. -+ -+The default value of @env{GCC_EXEC_PREFIX} is -+@file{@var{prefix}/lib/gcc/} where @var{prefix} is the prefix to -+the installed compiler. In many cases @var{prefix} is the value -+of @code{prefix} when you ran the @file{configure} script. -+ -+Other prefixes specified with @option{-B} take precedence over this prefix. -+ -+This prefix is also used for finding files such as @file{crt0.o} that are -+used for linking. -+ -+In addition, the prefix is used in an unusual way in finding the -+directories to search for header files. For each of the standard -+directories whose name normally begins with @samp{/usr/local/lib/gcc} -+(more precisely, with the value of @env{GCC_INCLUDE_DIR}), GCC tries -+replacing that beginning with the specified prefix to produce an -+alternate directory name. Thus, with @option{-Bfoo/}, GCC will search -+@file{foo/bar} where it would normally search @file{/usr/local/lib/bar}. -+These alternate directories are searched first; the standard directories -+come next. If a standard directory begins with the configured -+@var{prefix} then the value of @var{prefix} is replaced by -+@env{GCC_EXEC_PREFIX} when looking for header files. -+ -+@item COMPILER_PATH -+@findex COMPILER_PATH -+The value of @env{COMPILER_PATH} is a colon-separated list of -+directories, much like @env{PATH}. GCC tries the directories thus -+specified when searching for subprograms, if it can't find the -+subprograms using @env{GCC_EXEC_PREFIX}. -+ -+@item LIBRARY_PATH -+@findex LIBRARY_PATH -+The value of @env{LIBRARY_PATH} is a colon-separated list of -+directories, much like @env{PATH}. When configured as a native compiler, -+GCC tries the directories thus specified when searching for special -+linker files, if it can't find them using @env{GCC_EXEC_PREFIX}. Linking -+using GCC also uses these directories when searching for ordinary -+libraries for the @option{-l} option (but directories specified with -+@option{-L} come first). -+ -+@item LANG -+@findex LANG -+@cindex locale definition -+This variable is used to pass locale information to the compiler. One way in -+which this information is used is to determine the character set to be used -+when character literals, string literals and comments are parsed in C and C++. -+When the compiler is configured to allow multibyte characters, -+the following values for @env{LANG} are recognized: -+ -+@table @samp -+@item C-JIS -+Recognize JIS characters. -+@item C-SJIS -+Recognize SJIS characters. -+@item C-EUCJP -+Recognize EUCJP characters. -+@end table -+ -+If @env{LANG} is not defined, or if it has some other value, then the -+compiler will use mblen and mbtowc as defined by the default locale to -+recognize and translate multibyte characters. -+@end table -+ -+@noindent -+Some additional environments variables affect the behavior of the -+preprocessor. -+ -+@include cppenv.texi -+ -+@c man end -+ -+@node Precompiled Headers -+@section Using Precompiled Headers -+@cindex precompiled headers -+@cindex speed of compilation -+ -+Often large projects have many header files that are included in every -+source file. The time the compiler takes to process these header files -+over and over again can account for nearly all of the time required to -+build the project. To make builds faster, GCC allows users to -+`precompile' a header file; then, if builds can use the precompiled -+header file they will be much faster. -+ -+To create a precompiled header file, simply compile it as you would any -+other file, if necessary using the @option{-x} option to make the driver -+treat it as a C or C++ header file. You will probably want to use a -+tool like @command{make} to keep the precompiled header up-to-date when -+the headers it contains change. -+ -+A precompiled header file will be searched for when @code{#include} is -+seen in the compilation. As it searches for the included file -+(@pxref{Search Path,,Search Path,cpp,The C Preprocessor}) the -+compiler looks for a precompiled header in each directory just before it -+looks for the include file in that directory. The name searched for is -+the name specified in the @code{#include} with @samp{.gch} appended. If -+the precompiled header file can't be used, it is ignored. -+ -+For instance, if you have @code{#include "all.h"}, and you have -+@file{all.h.gch} in the same directory as @file{all.h}, then the -+precompiled header file will be used if possible, and the original -+header will be used otherwise. -+ -+Alternatively, you might decide to put the precompiled header file in a -+directory and use @option{-I} to ensure that directory is searched -+before (or instead of) the directory containing the original header. -+Then, if you want to check that the precompiled header file is always -+used, you can put a file of the same name as the original header in this -+directory containing an @code{#error} command. -+ -+This also works with @option{-include}. So yet another way to use -+precompiled headers, good for projects not designed with precompiled -+header files in mind, is to simply take most of the header files used by -+a project, include them from another header file, precompile that header -+file, and @option{-include} the precompiled header. If the header files -+have guards against multiple inclusion, they will be skipped because -+they've already been included (in the precompiled header). -+ -+If you need to precompile the same header file for different -+languages, targets, or compiler options, you can instead make a -+@emph{directory} named like @file{all.h.gch}, and put each precompiled -+header in the directory, perhaps using @option{-o}. It doesn't matter -+what you call the files in the directory, every precompiled header in -+the directory will be considered. The first precompiled header -+encountered in the directory that is valid for this compilation will -+be used; they're searched in no particular order. -+ -+There are many other possibilities, limited only by your imagination, -+good sense, and the constraints of your build system. -+ -+A precompiled header file can be used only when these conditions apply: -+ -+@itemize -+@item -+Only one precompiled header can be used in a particular compilation. -+ -+@item -+A precompiled header can't be used once the first C token is seen. You -+can have preprocessor directives before a precompiled header; you can -+even include a precompiled header from inside another header, so long as -+there are no C tokens before the @code{#include}. -+ -+@item -+The precompiled header file must be produced for the same language as -+the current compilation. You can't use a C precompiled header for a C++ -+compilation. -+ -+@item -+The precompiled header file must have been produced by the same compiler -+binary as the current compilation is using. -+ -+@item -+Any macros defined before the precompiled header is included must -+either be defined in the same way as when the precompiled header was -+generated, or must not affect the precompiled header, which usually -+means that they don't appear in the precompiled header at all. -+ -+The @option{-D} option is one way to define a macro before a -+precompiled header is included; using a @code{#define} can also do it. -+There are also some options that define macros implicitly, like -+@option{-O} and @option{-Wdeprecated}; the same rule applies to macros -+defined this way. -+ -+@item If debugging information is output when using the precompiled -+header, using @option{-g} or similar, the same kind of debugging information -+must have been output when building the precompiled header. However, -+a precompiled header built using @option{-g} can be used in a compilation -+when no debugging information is being output. -+ -+@item The same @option{-m} options must generally be used when building -+and using the precompiled header. @xref{Submodel Options}, -+for any cases where this rule is relaxed. -+ -+@item Each of the following options must be the same when building and using -+the precompiled header: -+ -+@gccoptlist{-fexceptions} -+ -+@item -+Some other command-line options starting with @option{-f}, -+@option{-p}, or @option{-O} must be defined in the same way as when -+the precompiled header was generated. At present, it's not clear -+which options are safe to change and which are not; the safest choice -+is to use exactly the same options when generating and using the -+precompiled header. The following are known to be safe: -+ -+@gccoptlist{-fmessage-length= -fpreprocessed -fsched-interblock @gol -+-fsched-spec -fsched-spec-load -fsched-spec-load-dangerous @gol -+-fsched-verbose=<number> -fschedule-insns -fvisibility= @gol -+-pedantic-errors} -+ -+@end itemize -+ -+For all of these except the last, the compiler will automatically -+ignore the precompiled header if the conditions aren't met. If you -+find an option combination that doesn't work and doesn't cause the -+precompiled header to be ignored, please consider filing a bug report, -+see @ref{Bugs}. -+ -+If you do use differing options when generating and using the -+precompiled header, the actual behavior will be a mixture of the -+behavior for the options. For instance, if you use @option{-g} to -+generate the precompiled header but not when using it, you may or may -+not get debugging information for routines in the precompiled header. -+ -+@node Running Protoize -+@section Running Protoize -+ -+The program @code{protoize} is an optional part of GCC@. You can use -+it to add prototypes to a program, thus converting the program to ISO -+C in one respect. The companion program @code{unprotoize} does the -+reverse: it removes argument types from any prototypes that are found. -+ -+When you run these programs, you must specify a set of source files as -+command line arguments. The conversion programs start out by compiling -+these files to see what functions they define. The information gathered -+about a file @var{foo} is saved in a file named @file{@var{foo}.X}. -+ -+After scanning comes actual conversion. The specified files are all -+eligible to be converted; any files they include (whether sources or -+just headers) are eligible as well. -+ -+But not all the eligible files are converted. By default, -+@code{protoize} and @code{unprotoize} convert only source and header -+files in the current directory. You can specify additional directories -+whose files should be converted with the @option{-d @var{directory}} -+option. You can also specify particular files to exclude with the -+@option{-x @var{file}} option. A file is converted if it is eligible, its -+directory name matches one of the specified directory names, and its -+name within the directory has not been excluded. -+ -+Basic conversion with @code{protoize} consists of rewriting most -+function definitions and function declarations to specify the types of -+the arguments. The only ones not rewritten are those for varargs -+functions. -+ -+@code{protoize} optionally inserts prototype declarations at the -+beginning of the source file, to make them available for any calls that -+precede the function's definition. Or it can insert prototype -+declarations with block scope in the blocks where undeclared functions -+are called. -+ -+Basic conversion with @code{unprotoize} consists of rewriting most -+function declarations to remove any argument types, and rewriting -+function definitions to the old-style pre-ISO form. -+ -+Both conversion programs print a warning for any function declaration or -+definition that they can't convert. You can suppress these warnings -+with @option{-q}. -+ -+The output from @code{protoize} or @code{unprotoize} replaces the -+original source file. The original file is renamed to a name ending -+with @samp{.save} (for DOS, the saved filename ends in @samp{.sav} -+without the original @samp{.c} suffix). If the @samp{.save} (@samp{.sav} -+for DOS) file already exists, then the source file is simply discarded. -+ -+@code{protoize} and @code{unprotoize} both depend on GCC itself to -+scan the program and collect information about the functions it uses. -+So neither of these programs will work until GCC is installed. -+ -+Here is a table of the options you can use with @code{protoize} and -+@code{unprotoize}. Each option works with both programs unless -+otherwise stated. -+ -+@table @code -+@item -B @var{directory} -+Look for the file @file{SYSCALLS.c.X} in @var{directory}, instead of the -+usual directory (normally @file{/usr/local/lib}). This file contains -+prototype information about standard system functions. This option -+applies only to @code{protoize}. -+ -+@item -c @var{compilation-options} -+Use @var{compilation-options} as the options when running @command{gcc} to -+produce the @samp{.X} files. The special option @option{-aux-info} is -+always passed in addition, to tell @command{gcc} to write a @samp{.X} file. -+ -+Note that the compilation options must be given as a single argument to -+@code{protoize} or @code{unprotoize}. If you want to specify several -+@command{gcc} options, you must quote the entire set of compilation options -+to make them a single word in the shell. -+ -+There are certain @command{gcc} arguments that you cannot use, because they -+would produce the wrong kind of output. These include @option{-g}, -+@option{-O}, @option{-c}, @option{-S}, and @option{-o} If you include these in -+the @var{compilation-options}, they are ignored. -+ -+@item -C -+Rename files to end in @samp{.C} (@samp{.cc} for DOS-based file -+systems) instead of @samp{.c}. This is convenient if you are converting -+a C program to C++. This option applies only to @code{protoize}. -+ -+@item -g -+Add explicit global declarations. This means inserting explicit -+declarations at the beginning of each source file for each function -+that is called in the file and was not declared. These declarations -+precede the first function definition that contains a call to an -+undeclared function. This option applies only to @code{protoize}. -+ -+@item -i @var{string} -+Indent old-style parameter declarations with the string @var{string}. -+This option applies only to @code{protoize}. -+ -+@code{unprotoize} converts prototyped function definitions to old-style -+function definitions, where the arguments are declared between the -+argument list and the initial @samp{@{}. By default, @code{unprotoize} -+uses five spaces as the indentation. If you want to indent with just -+one space instead, use @option{-i " "}. -+ -+@item -k -+Keep the @samp{.X} files. Normally, they are deleted after conversion -+is finished. -+ -+@item -l -+Add explicit local declarations. @code{protoize} with @option{-l} inserts -+a prototype declaration for each function in each block which calls the -+function without any declaration. This option applies only to -+@code{protoize}. -+ -+@item -n -+Make no real changes. This mode just prints information about the conversions -+that would have been done without @option{-n}. -+ -+@item -N -+Make no @samp{.save} files. The original files are simply deleted. -+Use this option with caution. -+ -+@item -p @var{program} -+Use the program @var{program} as the compiler. Normally, the name -+@file{gcc} is used. -+ -+@item -q -+Work quietly. Most warnings are suppressed. -+ -+@item -v -+Print the version number, just like @option{-v} for @command{gcc}. -+@end table -+ -+If you need special compiler options to compile one of your program's -+source files, then you should generate that file's @samp{.X} file -+specially, by running @command{gcc} on that source file with the -+appropriate options and the option @option{-aux-info}. Then run -+@code{protoize} on the entire set of files. @code{protoize} will use -+the existing @samp{.X} file because it is newer than the source file. -+For example: -+ -+@smallexample -+gcc -Dfoo=bar file1.c -aux-info file1.X -+protoize *.c -+@end smallexample -+ -+@noindent -+You need to include the special files along with the rest in the -+@code{protoize} command, even though their @samp{.X} files already -+exist, because otherwise they won't get converted. -+ -+@xref{Protoize Caveats}, for more information on how to use -+@code{protoize} successfully. -diff -Naur gcc-4.4.2.orig/libgcc/config/lm32/t-elf gcc-4.4.2-rtems4.10-20091015/libgcc/config/lm32/t-elf +diff -Naur gcc-4.4.2.orig/libgcc/config/lm32/t-elf gcc-4.4.2/libgcc/config/lm32/t-elf --- gcc-4.4.2.orig/libgcc/config/lm32/t-elf 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/libgcc/config/lm32/t-elf 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/libgcc/config/lm32/t-elf 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,12 @@ +# Assemble startup files. + @@ -28412,15 +4244,15 @@ diff -Naur gcc-4.4.2.orig/libgcc/config/lm32/t-elf gcc-4.4.2-rtems4.10-20091015/ + +CRTSTUFF_T_CFLAGS = -G 0 +TARGET_LIBGCC2_CFLAGS = -G 0 -diff -Naur gcc-4.4.2.orig/libgcc/config/lm32/t-uclinux gcc-4.4.2-rtems4.10-20091015/libgcc/config/lm32/t-uclinux +diff -Naur gcc-4.4.2.orig/libgcc/config/lm32/t-uclinux gcc-4.4.2/libgcc/config/lm32/t-uclinux --- gcc-4.4.2.orig/libgcc/config/lm32/t-uclinux 1970-01-01 01:00:00.000000000 +0100 -+++ gcc-4.4.2-rtems4.10-20091015/libgcc/config/lm32/t-uclinux 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/libgcc/config/lm32/t-uclinux 2009-10-15 18:36:00.000000000 +0200 @@ -0,0 +1,2 @@ +CRTSTUFF_T_CFLAGS = -fPIC +TARGET_LIBGCC2_CFLAGS = -fPIC -diff -Naur gcc-4.4.2.orig/libgcc/config.host gcc-4.4.2-rtems4.10-20091015/libgcc/config.host +diff -Naur gcc-4.4.2.orig/libgcc/config.host gcc-4.4.2/libgcc/config.host --- gcc-4.4.2.orig/libgcc/config.host 2009-04-17 13:58:41.000000000 +0200 -+++ gcc-4.4.2-rtems4.10-20091015/libgcc/config.host 2009-10-15 18:36:00.000000000 +0200 ++++ gcc-4.4.2/libgcc/config.host 2009-10-15 18:36:00.000000000 +0200 @@ -95,6 +95,9 @@ hppa*-*-*) cpu_type=pa |