diff options
Diffstat (limited to '')
-rw-r--r-- | c/src/tests/mptests/aclocal.m4 | 485 | ||||
-rw-r--r-- | c/src/tests/mptests/configure | 113 |
2 files changed, 365 insertions, 233 deletions
diff --git a/c/src/tests/mptests/aclocal.m4 b/c/src/tests/mptests/aclocal.m4 index 11d7f77d44..58e9b0f314 100644 --- a/c/src/tests/mptests/aclocal.m4 +++ b/c/src/tests/mptests/aclocal.m4 @@ -19,6 +19,9 @@ dnl $1 .. relative path from this configure.in to the toplevel configure.in dnl AC_DEFUN(RTEMS_TOP, [dnl +AC_BEFORE([$0], [AC_CONFIG_AUX_DIR])dnl +AC_BEFORE([$0], [AM_INIT_AUTOMAKE])dnl + AC_ARG_WITH(target-subdir, [ --with-target-subdir=DIR], TARGET_SUBDIR="$withval", @@ -44,47 +47,6 @@ fi AC_MSG_RESULT($RTEMS_VERSION) ])dnl -dnl -dnl $Id$ -dnl - -dnl canonicalize target cpu -dnl NOTE: Most rtems targets do not fullfil autoconf's -dnl target naming conventions "processor-vendor-os" -dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them -dnl and we have to fix it for rtems ourselves - -AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, -[ -AC_CANONICAL_SYSTEM -AC_MSG_CHECKING(rtems target cpu) -changequote(,)dnl -case "${target}" in - # hpux unix port should go here - i[3456]86-go32-rtems*) - RTEMS_CPU=i386 - ;; - i[3456]86-pc-linux*) # unix "simulator" port - RTEMS_CPU=unix - ;; - i[3456]86-*freebsd2*) # unix "simulator" port - RTEMS_CPU=unix - ;; - no_cpu-*rtems*) - RTEMS_CPU=no_cpu - ;; - sparc-sun-solaris*) # unix "simulator" port - RTEMS_CPU=unix - ;; - *) - RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` - ;; -esac -changequote([,])dnl -AC_SUBST(RTEMS_CPU) -AC_MSG_RESULT($RTEMS_CPU) -]) - # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. @@ -179,6 +141,47 @@ else fi AC_SUBST($1)]) +dnl +dnl $Id$ +dnl + +dnl canonicalize target cpu +dnl NOTE: Most rtems targets do not fullfil autoconf's +dnl target naming conventions "processor-vendor-os" +dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them +dnl and we have to fix it for rtems ourselves + +AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, +[ +AC_CANONICAL_SYSTEM +AC_MSG_CHECKING(rtems target cpu) +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_CPU=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_CPU=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_CPU=unix + ;; + no_cpu-*rtems*) + RTEMS_CPU=no_cpu + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_CPU=unix + ;; + *) + RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_CPU) +AC_MSG_RESULT($RTEMS_CPU) +]) + # Add --enable-maintainer-mode option to configure. # From Jim Meyering @@ -279,6 +282,7 @@ dnl used by the toplevel configure script dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list) AC_DEFUN(RTEMS_ENABLE_RTEMSBSP, [ +AC_BEFORE([$0], [RTEMS_ENV_RTEMSBSP])dnl AC_ARG_ENABLE(rtemsbsp, [ --enable-rtemsbsp=bsp1 bsp2 .. BSPs to include in build], [case "${enableval}" in @@ -291,6 +295,12 @@ dnl Pass a single BSP via an environment variable dnl used by per BSP configure scripts AC_DEFUN(RTEMS_ENV_RTEMSBSP, [dnl +AC_BEFORE([$0], [RTEMS_ENABLE_RTEMSBSP])dnl +AC_BEFORE([$0], [RTEMS_PROJECT_ROOT])dnl +AC_BEFORE([$0], [RTEMS_CHECK_CUSTOM_BSP])dnl +AC_BEFORE([$0], [RTEMS_CHECK_MULTIPROCESSING])dnl +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + AC_MSG_CHECKING([for RTEMS_BSP]) AC_CACHE_VAL(rtems_cv_RTEMS_BSP, [dnl @@ -304,6 +314,82 @@ AC_MSG_RESULT(${RTEMS_BSP}) AC_SUBST(RTEMS_BSP) ]) +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +dnl $Id$ + +dnl Report all available bsps for a target, +dnl check if a bsp-subdirectory is present for all bsps found +dnl +dnl RTEMS_CHECK_BSPS(bsp_list) +AC_DEFUN(RTEMS_CHECK_BSPS, +[ +AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target +AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir +AC_MSG_CHECKING([for bsps]) +case "${target}" in +changequote(,)dnl + i[3456]86-go32-rtems*) +changequote([,])dnl + $1="go32 go32_p5" + ;; + *) + files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` + for file in $files; do + case $file in + shared*);; + Makefile*);; + READ*);; + CVS*);; + pxfl*);; + go32*);; # so the i386 port can pick up the other Makefiles + # Now account for BSPs with build variants + gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; + p4000) rtems_bsp="$rtems_bsp p4600 p4650";; + mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; + *) $1="[$]$1 $file";; + esac; + done + ;; +esac +AC_MSG_RESULT([[$]$1 .. done]) +])dnl + +AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, +[dnl +AC_REQUIRE([RTEMS_TOP]) + +AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) +if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then + AC_MSG_RESULT([yes]) +else + AC_MSG_ERROR([no]) +fi +])dnl + dnl $Id$ dnl check if RTEMS support a cpu @@ -311,6 +397,8 @@ AC_DEFUN(RTEMS_CHECK_CPU, [dnl AC_REQUIRE([RTEMS_TOP]) AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + # Is this a supported CPU? AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then @@ -322,54 +410,143 @@ fi dnl $Id$ - -AC_DEFUN(RTEMS_CANONICAL_HOST, +dnl +AC_DEFUN(RTEMS_CHECK_POSIX_API, [dnl -AC_REQUIRE([AC_CANONICAL_HOST]) -RTEMS_HOST=$host_os +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_POSIX])dnl + +AC_CACHE_CHECK([whether BSP supports libposix], + rtems_cv_HAS_POSIX_API, + [dnl + case "$RTEMS_CPU" in + unix*) + rtems_cv_HAS_POSIX_API="no" + ;; + *) + if test "${RTEMS_HAS_POSIX_API}" = "yes"; then + rtems_cv_HAS_POSIX_API="yes"; + else + rtems_cv_HAS_POSIX_API="disabled"; + fi + ;; + esac]) +if test "$rtems_cv_HAS_POSIX_API" = "yes"; then + HAS_POSIX_API="yes"; +else + HAS_POSIX_API="no"; +fi +AC_SUBST(HAS_POSIX_API)dnl +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_POSIX, +[ +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + +AC_ARG_ENABLE(posix, +[ --enable-posix enable posix interface], +[case "${enableval}" in + yes) RTEMS_HAS_POSIX_API=yes ;; + no) RTEMS_HAS_POSIX_API=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;; +esac],[RTEMS_HAS_POSIX_API=yes]) +AC_SUBST(RTEMS_HAS_POSIX_API) + changequote(,)dnl case "${target}" in # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_HAS_POSIX_API=no + ;; i[3456]86-pc-linux*) # unix "simulator" port - RTEMS_HOST=Linux + RTEMS_HAS_POSIX_API=no ;; i[3456]86-*freebsd2*) # unix "simulator" port - RTEMS_HOST=FreeBSD + RTEMS_HAS_POSIX_API=no + ;; + no_cpu-*rtems*) + RTEMS_HAS_POSIX_API=no ;; sparc-sun-solaris*) # unix "simulator" port - RTEMS_HOST=Solaris + RTEMS_HAS_POSIX_API=no ;; *) ;; esac changequote([,])dnl -AC_SUBST(RTEMS_HOST) -])dnl +AC_SUBST(RTEMS_HAS_POSIX_API) +]) dnl dnl $Id$ -dnl +dnl -AC_DEFUN(RTEMS_PROJECT_ROOT, +AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING, [dnl -AC_REQUIRE([RTEMS_TOP]) -if test "$TARGET_SUBDIR" = "." ; then -PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +AC_REQUIRE([RTEMS_TOP])dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_MULTIPROCESSING])dnl + +AC_CACHE_CHECK([whether BSP supports multiprocessing], + rtems_cv_HAS_MP, + [dnl + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${$1}/shmsupp"; then + if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then + rtems_cv_HAS_MP="yes" ; + else + rtems_cv_HAS_MP="disabled"; + fi + else + rtems_cv_HAS_MP="no"; + fi]) +if test "$rtems_cv_HAS_MP" = "yes"; then +HAS_MP="yes" else -PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +HAS_MP="no" fi -AC_SUBST(PROJECT_ROOT) - -RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP -AC_SUBST(RTEMS_ROOT) +AC_SUBST(HAS_MP) +]) -INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" -AC_SUBST(INSTALL_CHANGE) +dnl $Id$ -PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" -AC_SUBST(PACKHEX) +AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING, +[ +AC_ARG_ENABLE(multiprocessing, +[ --enable-multiprocessing enable multiprocessing interface], +[case "${enableval}" in + yes) RTEMS_HAS_MULTIPROCESSING=yes ;; + no) RTEMS_HAS_MULTIPROCESSING=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;; +esac],[RTEMS_HAS_MULTIPROCESSING=no]) +AC_SUBST(RTEMS_HAS_MULTIPROCESSING)dnl ]) +dnl $Id$ + +AC_DEFUN(RTEMS_CANONICAL_HOST, +[dnl +AC_REQUIRE([AC_CANONICAL_HOST]) +RTEMS_HOST=$host_os +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HOST=Linux + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HOST=FreeBSD + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HOST=Solaris + ;; + *) + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_HOST) +])dnl dnl dnl $Id$ @@ -383,6 +560,7 @@ AC_DEFUN(RTEMS_PROG_CC, [ AC_BEFORE([$0], [AC_PROG_CPP])dnl AC_BEFORE([$0], [AC_PROG_CC])dnl +AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl dnl Only accept gcc and cc @@ -463,82 +641,6 @@ AC_SUBST(GCCSED) ]) dnl -dnl $Id$ -dnl -dnl Set program_prefix -dnl -dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) -dnl Extracted from configure - -AC_DEFUN(RTEMS_TOOL_PREFIX, -[AC_REQUIRE([AC_CANONICAL_TARGET])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl - -changequote(,)dnl -if [ "${program_prefix}" = "NONE" ] ; then - if [ "${target}" = "${host}" ] ; then - program_prefix= - else - program_prefix=${target}- - fi -fi -changequote([,])dnl -]) - -dnl -dnl $Id$ -dnl -dnl Check whether the target compiler accepts -specs -dnl -dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de -dnl - -AC_DEFUN(RTEMS_GCC_SPECS, -[AC_REQUIRE([RTEMS_PROG_CC]) -AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts -specs,rtems_cv_gcc_specs, -[ -rtems_cv_gcc_specs=no -if test "$rtems_cv_prog_gcc" = "yes"; then - touch confspec - echo 'void f(){}' >conftest.c - if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then - rtems_cv_gcc_specs=yes - fi -fi -rm -f confspec conftest* -])]) - -dnl -dnl $Id$ -dnl -dnl Check whether the target compiler accepts -pipe -dnl -dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de -dnl - -AC_DEFUN(RTEMS_GCC_PIPE, -[AC_REQUIRE([RTEMS_PROG_CC]) -AC_REQUIRE([AC_CANONICAL_HOST]) -AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts --pipe,rtems_cv_gcc_pipe, -[ -rtems_cv_gcc_pipe=no -if test "$rtems_cv_prog_gcc" = "yes"; then -case "$host_os" in - cygwin*) - ;; - *) - echo 'void f(){}' >conftest.c - if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then - rtems_cv_gcc_pipe=yes - fi - rm -f conftest* - ;; -esac -fi -]) -]) - -dnl dnl $Id$ dnl dnl Set target tools @@ -662,52 +764,77 @@ fi ]) +dnl +dnl $Id$ +dnl +dnl Set program_prefix +dnl +dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl Extracted from configure + +AC_DEFUN(RTEMS_TOOL_PREFIX, +[AC_REQUIRE([AC_CANONICAL_TARGET])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl + +changequote(,)dnl +if [ "${program_prefix}" = "NONE" ] ; then + if [ "${target}" = "${host}" ] ; then + program_prefix= + else + program_prefix=${target}- + fi +fi +changequote([,])dnl +]) + +dnl dnl $Id$ +dnl +dnl Check whether the target compiler accepts -specs +dnl + +AC_DEFUN(RTEMS_GCC_SPECS, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts -specs,rtems_cv_gcc_specs, +[ +rtems_cv_gcc_specs=no +if test "$rtems_cv_prog_gcc" = "yes"; then + touch confspec + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then + rtems_cv_gcc_specs=yes + fi +fi +rm -f confspec conftest* +])]) -dnl Report all available bsps for a target, -dnl check if a bsp-subdirectory is present for all bsps found dnl -dnl RTEMS_CHECK_BSPS(bsp_list) -AC_DEFUN(RTEMS_CHECK_BSPS, +dnl $Id$ +dnl +dnl Check whether the target compiler accepts -pipe +dnl +dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de +dnl + +AC_DEFUN(RTEMS_GCC_PIPE, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_REQUIRE([AC_CANONICAL_HOST]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts --pipe,rtems_cv_gcc_pipe, [ -AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target -AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir -AC_MSG_CHECKING([for bsps]) -case "${target}" in -changequote(,)dnl - i[3456]86-go32-rtems*) -changequote([,])dnl - $1="go32 go32_p5" +rtems_cv_gcc_pipe=no +if test "$rtems_cv_prog_gcc" = "yes"; then +case "$host_os" in + cygwin*) ;; *) - files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` - for file in $files; do - case $file in - shared*);; - Makefile*);; - READ*);; - CVS*);; - pxfl*);; - go32*);; # so the i386 port can pick up the other Makefiles - # Now account for BSPs with build variants - gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; - p4000) rtems_bsp="$rtems_bsp p4600 p4650";; - mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; - *) $1="[$]$1 $file";; - esac; - done + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then + rtems_cv_gcc_pipe=yes + fi + rm -f conftest* ;; esac -AC_MSG_RESULT([[$]$1 .. done]) -])dnl - -AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, -[dnl -AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) -if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then - AC_MSG_RESULT([yes]) -else - AC_MSG_ERROR([no]) fi -])dnl +]) +]) diff --git a/c/src/tests/mptests/configure b/c/src/tests/mptests/configure index c4f7a65ce6..dd0707dd54 100644 --- a/c/src/tests/mptests/configure +++ b/c/src/tests/mptests/configure @@ -539,6 +539,7 @@ else fi + # Check whether --with-target-subdir or --without-target-subdir was given. if test "${with_target_subdir+set}" = set; then withval="$with_target_subdir" @@ -552,7 +553,7 @@ RTEMS_TOPdir="../../../.."; echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:556: checking for RTEMS Version" >&5 +echo "configure:557: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -613,7 +614,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:617: checking host system type" >&5 +echo "configure:618: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -634,7 +635,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:638: checking target system type" >&5 +echo "configure:639: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -652,7 +653,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:656: checking build system type" >&5 +echo "configure:657: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -675,7 +676,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:679: checking rtems target cpu" >&5 +echo "configure:680: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -713,7 +714,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:717: checking for a BSD compatible install" >&5 +echo "configure:718: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -766,7 +767,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:770: checking whether build environment is sane" >&5 +echo "configure:771: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -823,7 +824,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:827: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:828: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -863,7 +864,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:867: checking for working aclocal" >&5 +echo "configure:868: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -876,7 +877,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:880: checking for working autoconf" >&5 +echo "configure:881: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -889,7 +890,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:893: checking for working automake" >&5 +echo "configure:894: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -902,7 +903,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:906: checking for working autoheader" >&5 +echo "configure:907: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -915,7 +916,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:919: checking for working makeinfo" >&5 +echo "configure:920: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -929,7 +930,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:933: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:934: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1014,8 +1015,9 @@ fi + echo $ac_n "checking for RTEMS_BSP""... $ac_c" 1>&6 -echo "configure:1019: checking for RTEMS_BSP" >&5 +echo "configure:1021: checking for RTEMS_BSP" >&5 if eval "test \"`echo '$''{'rtems_cv_RTEMS_BSP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1031,9 +1033,10 @@ echo "$ac_t""${RTEMS_BSP}" 1>&6 + # Is this a supported CPU? echo $ac_n "checking if cpu $RTEMS_CPU is supported""... $ac_c" 1>&6 -echo "configure:1037: checking if cpu $RTEMS_CPU is supported" >&5 +echo "configure:1040: checking if cpu $RTEMS_CPU is supported" >&5 if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then echo "$ac_t""yes" 1>&6 else @@ -1094,7 +1097,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1098: checking for $ac_word" >&5 +echo "configure:1101: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1138,7 +1141,7 @@ rtems_save_CFLAGS=$CFLAGS CC=$CC_FOR_TARGET echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1142: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1145: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1149,12 +1152,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1153 "configure" +#line 1156 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1180,12 +1183,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1184: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1187: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1189: checking whether we are using GNU C" >&5 +echo "configure:1192: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1194,7 +1197,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1198: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1209,7 +1212,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1213: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1216: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1251,7 +1254,7 @@ unset ac_cv_prog_cc_cross echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6 -echo "configure:1255: checking whether $CC_FOR_TARGET accepts -specs" >&5 +echo "configure:1258: checking whether $CC_FOR_TARGET accepts -specs" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1272,7 +1275,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6 -echo "configure:1276: checking whether $CC_FOR_TARGET accepts --pipe" >&5 +echo "configure:1279: checking whether $CC_FOR_TARGET accepts --pipe" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1314,7 +1317,7 @@ esac echo $ac_n "checking target's ar""... $ac_c" 1>&6 -echo "configure:1318: checking target's ar" >&5 +echo "configure:1321: checking target's ar" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1347,7 +1350,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1351: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 +echo "configure:1354: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 case "$AR_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1364,7 +1367,7 @@ echo "configure:1351: checking whether environment variable AR_FOR_TARGET is an # Extract the first word of ""$program_prefix"ar", so it can be a program name with args. set dummy "$program_prefix"ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1368: checking for $ac_word" >&5 +echo "configure:1371: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1401,7 +1404,7 @@ fi echo $ac_n "checking target's as""... $ac_c" 1>&6 -echo "configure:1405: checking target's as" >&5 +echo "configure:1408: checking target's as" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1434,7 +1437,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1438: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 +echo "configure:1441: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 case "$AS_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1451,7 +1454,7 @@ echo "configure:1438: checking whether environment variable AS_FOR_TARGET is an # Extract the first word of ""$program_prefix"as", so it can be a program name with args. set dummy "$program_prefix"as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1455: checking for $ac_word" >&5 +echo "configure:1458: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1488,7 +1491,7 @@ fi echo $ac_n "checking target's ld""... $ac_c" 1>&6 -echo "configure:1492: checking target's ld" >&5 +echo "configure:1495: checking target's ld" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1521,7 +1524,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1525: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 +echo "configure:1528: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 case "$LD_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1538,7 +1541,7 @@ echo "configure:1525: checking whether environment variable LD_FOR_TARGET is an # Extract the first word of ""$program_prefix"ld", so it can be a program name with args. set dummy "$program_prefix"ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1542: checking for $ac_word" >&5 +echo "configure:1545: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1575,7 +1578,7 @@ fi echo $ac_n "checking target's nm""... $ac_c" 1>&6 -echo "configure:1579: checking target's nm" >&5 +echo "configure:1582: checking target's nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1608,7 +1611,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1612: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 +echo "configure:1615: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 case "$NM_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1625,7 +1628,7 @@ echo "configure:1612: checking whether environment variable NM_FOR_TARGET is an # Extract the first word of ""$program_prefix"nm", so it can be a program name with args. set dummy "$program_prefix"nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1629: checking for $ac_word" >&5 +echo "configure:1632: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1663,7 +1666,7 @@ fi echo $ac_n "checking target's ranlib""... $ac_c" 1>&6 -echo "configure:1667: checking target's ranlib" >&5 +echo "configure:1670: checking target's ranlib" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1696,7 +1699,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1700: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 +echo "configure:1703: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 case "$RANLIB_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1713,7 +1716,7 @@ echo "configure:1700: checking whether environment variable RANLIB_FOR_TARGET is # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args. set dummy "$program_prefix"ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1717: checking for $ac_word" >&5 +echo "configure:1720: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1752,7 +1755,7 @@ fi # ranlib wasn't found; check if ar -s is available echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6 -echo "configure:1756: checking whether $AR_FOR_TARGET -s works" >&5 +echo "configure:1759: checking whether $AR_FOR_TARGET -s works" >&5 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1761,8 +1764,8 @@ cat > conftest.$ac_ext <<EOF int foo( int b ) { return b; } EOF -if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ - && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ +if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ + && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1769: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ && test -s conftest.a ; \ then rtems_cv_AR_FOR_TARGET_S="yes" @@ -1787,7 +1790,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6 -echo "configure:1791: checking target's objcopy" >&5 +echo "configure:1794: checking target's objcopy" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1820,7 +1823,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1824: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 +echo "configure:1827: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 case "$OBJCOPY_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1837,7 +1840,7 @@ echo "configure:1824: checking whether environment variable OBJCOPY_FOR_TARGET i # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args. set dummy "$program_prefix"objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1841: checking for $ac_word" >&5 +echo "configure:1844: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1874,7 +1877,7 @@ fi echo $ac_n "checking target's size""... $ac_c" 1>&6 -echo "configure:1878: checking target's size" >&5 +echo "configure:1881: checking target's size" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1907,7 +1910,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1911: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 +echo "configure:1914: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 case "$SIZE_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1924,7 +1927,7 @@ echo "configure:1911: checking whether environment variable SIZE_FOR_TARGET is a # Extract the first word of ""$program_prefix"size", so it can be a program name with args. set dummy "$program_prefix"size; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1928: checking for $ac_word" >&5 +echo "configure:1931: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1961,7 +1964,7 @@ fi echo $ac_n "checking target's strip""... $ac_c" 1>&6 -echo "configure:1965: checking target's strip" >&5 +echo "configure:1968: checking target's strip" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1994,7 +1997,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1998: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 +echo "configure:2001: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 case "$STRIP_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2011,7 +2014,7 @@ echo "configure:1998: checking whether environment variable STRIP_FOR_TARGET is # Extract the first word of ""$program_prefix"strip", so it can be a program name with args. set dummy "$program_prefix"strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2015: checking for $ac_word" >&5 +echo "configure:2018: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2048,8 +2051,10 @@ fi + + echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6 -echo "configure:2053: checking for make/custom/$RTEMS_BSP.cfg" >&5 +echo "configure:2058: checking for make/custom/$RTEMS_BSP.cfg" >&5 if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then echo "$ac_t""yes" 1>&6 else |