summaryrefslogtreecommitdiffstats
path: root/c/src/tests/libtests/termios
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--c/src/tests/libtests/termios/.cvsignore2
-rw-r--r--c/src/tests/libtests/termios/Makefile.am42
-rw-r--r--c/src/tests/libtests/termios/README99
-rw-r--r--c/src/tests/libtests/termios/init.c781
4 files changed, 0 insertions, 924 deletions
diff --git a/c/src/tests/libtests/termios/.cvsignore b/c/src/tests/libtests/termios/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/tests/libtests/termios/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/tests/libtests/termios/Makefile.am b/c/src/tests/libtests/termios/Makefile.am
deleted file mode 100644
index c531928e4f..0000000000
--- a/c/src/tests/libtests/termios/Makefile.am
+++ /dev/null
@@ -1,42 +0,0 @@
-##
-## $Id$
-##
-
-
-TEST = termios
-
-MANAGERS = io
-
-C_FILES = init.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES =
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES =
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
- $(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
diff --git a/c/src/tests/libtests/termios/README b/c/src/tests/libtests/termios/README
deleted file mode 100644
index 2515b2994f..0000000000
--- a/c/src/tests/libtests/termios/README
+++ /dev/null
@@ -1,99 +0,0 @@
-#
-# $Id$
-#
-
-These tests are brought to you by the letter `q'.
-
-When you start the test, you should see:
-
- You have the following choices:
- 1 - Reset the struct termios
- 2 - Look at the current termios setting
- 3 - Change the line characteristics
- 4 - Test canonical input
- 5 - Test raw input
- 9 - Exit
- Enter your choice (1 to 5 or 9, followed by a carriage return):
-
-The individual tests are briefly described below:
-
-
-1. Reset the struct termios.
-
-Included just in case you get into trouble. More than likely, if you are in
-trouble, neither input nor output are likely to work and this won't help. But
-hey, it should give you some warm fuzzy feeling that its there...
-
-
-2. Look at the current termios setting
-
-Dumps the current state of the termios settings in hex and with symbolic flag
-names.
-
-
-3. Change the line characteristics
-
-Allows you to change the line speed, parity, number of data bits and number of
-stop bits. You must supply a delay before the change takes effect. This gives
-you time to switch your terminal settings to continue with the test.
-
-WARNING: Minicom under Linux gets extremely unhappy (as does the /dev/ttyS?
-underlying devices) if you change the line characteristics and do not make the
-corresponding change in the terminal emulator.
-
-
-4. Test canonical input
-
-Simple test of canonical or cooked input mode. Try typing some tabs and/or control characters and make sure that you can backspace over them properly.
-
-
-5. Test raw input
-
-The line is placed into raw mode and four separate test are done:
-
-VMIN=0, VTIME=0
- Each letter you type should produce a line of output.
- The `count' should be quite large, since (as you correctly
- pointed out) the read is non-blocking. The time should be
- the interval between typing characters.
- Type a `q' to finish the test.
-VMIN=0, VTIME=20
- Again, each letter should produce a line of output. The
- `count' should be much smaller -- the read is non-blocking
- but has a timeout of 2 seconds, so the count should be about
- half the `interval'.
- Type a `q' to finish the test.
-VMIN=5, VTIME=0
- A line should be produced for every 5 characters typed. The
- count should be 1. This is a blocking read.
- Type a `q' as the first character of a group of 5 to finish
- the test.
-VMIN=5, VTIME=20
- Type a character. Two seconds later a line should be printed.
- Count should be 1. Type a character, and another within 2 seconds.
- Two seconds after last character (or right after the 5th character)
- a line should be printed.
- Type a `q' as the first character of a group to finish the test.
-
-
-9. Exit
-
-Gets you out of the test.
-
-
-Clear???
-
-
----
-Eric Norum
-eric@skatter.usask.ca
-Saskatchewan Accelerator Laboratory
-University of Saskatchewan
-Saskatoon, Canada.
-
-Charles-Antoine Gauthier
-Software Engineering Group
-Institute for Information Technology
-National Research Council of Canada
-charles.gauthier@nrc.ca
-
diff --git a/c/src/tests/libtests/termios/init.c b/c/src/tests/libtests/termios/init.c
deleted file mode 100644
index eb7045bf31..0000000000
--- a/c/src/tests/libtests/termios/init.c
+++ /dev/null
@@ -1,781 +0,0 @@
-/*
- * RTEMS configuration/initialization
- *
- * This program may be distributed and used for any purpose.
- * I ask only that you:
- * 1. Leave this author information intact.
- * 2. Document any changes you make.
- *
- * W. Eric Norum
- * Saskatchewan Accelerator Laboratory
- * University of Saskatchewan
- * Saskatoon, Saskatchewan, CANADA
- * eric@skatter.usask.ca
- *
- * Additions:
- * Charles-Antoine Gauthier
- * Software Engineering Group
- * Institute for Information Technology
- * National Research Council of Canada
- * charles.gauthier@nrc.ca
- *
- * $Id$
- */
-
-#include <bsp.h>
-
-
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS 1
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_MICROSECONDS_PER_TICK 1000
-
-#define CONFIGURE_INIT
-
-rtems_task Init (rtems_task_argument argument);
-
-#include <confdefs.h>
-
-#include <stdio.h>
-#include <unistd.h>
-#include <termios.h>
-#include <errno.h>
-#include <string.h>
-
-#include <tmacros.h>
-
-#if !defined(fileno)
-int fileno( FILE *stream); /* beyond ANSI */
-#endif
-
-/* Some of the termios dumping code depends on bit positions! */
-
-void print_32bits( unsigned long bits, unsigned char size, char * names[] )
-{
- unsigned char i;
-
- for( i = 0; i < size; i++ ) {
- if( (bits >> i) & 0x1 )
- printf( "%s ", names[i] );
- }
-}
-
-
-void print_c_iflag( struct termios * tp )
-{
- char * c_iflag_bits [] = {
- "IGNBRK", /* 0000001 */
- "BRKINT", /* 0000002 */
- "IGNPAR", /* 0000004 */
- "PARMRK", /* 0000010 */
- "INPCK", /* 0000020 */
- "ISTRIP", /* 0000040 */
- "INLCR", /* 0000100 */
- "IGNCR", /* 0000200 */
- "ICRNL", /* 0000400 */
- "IUCLC", /* 0001000 */
- "IXON", /* 0002000 */
- "IXANY", /* 0004000 */
- "IXOFF", /* 0010000 */
- "IMAXBEL", /* 0020000 */
- "unknown", /* 0040000 */
- "unknown", /* 0100000 */
- "unknown", /* 0200000 */
- "unknown", /* 0400000 */
- "unknown", /* 1000000 */
- "unknown", /* 2000000 */
- "unknown" /* 4000000 */
- };
-
- printf( "c_iflag = 0x%08x\n\t", tp->c_iflag );
- print_32bits( tp->c_iflag, sizeof( c_iflag_bits )/sizeof( char * ), c_iflag_bits );
- printf( "\n" );
-}
-
-
-void print_c_oflag( struct termios * tp )
-{
- printf( "c_oflag = 0x%08x\n\t", tp->c_oflag );
-
- if( tp->c_oflag & OPOST )
- printf( "OPOST " );
-
- if( tp->c_oflag & OLCUC )
- printf( "OLCUC " );
-
- if( tp->c_oflag & ONLCR )
- printf( "ONLCR " );
-
- if( tp->c_oflag & OCRNL )
- printf( "OCRNL " );
-
- if( tp->c_oflag & ONOCR )
- printf( "ONOCR " );
-
- if( tp->c_oflag & ONLRET )
- printf( "ONLRET " );
-
- if( tp->c_oflag & OFILL )
- printf( "OFILL " );
-
- if( tp->c_oflag & OFDEL )
- printf( "OFDEL " );
-
- switch( tp->c_oflag & NLDLY ) {
- case NL0:
- printf( "NL0 " );
- break;
-
- case NL1:
- printf( "NL1 " );
- break;
- }
-
- switch( tp->c_oflag & CRDLY ) {
- case CR0:
- printf( "CR0 " );
- break;
-
- case CR1:
- printf( "CR1 " );
- break;
-
- case CR2:
- printf( "CR2 " );
- break;
-
- case CR3:
- printf( "CR3 " );
- break;
- }
-
- switch( tp->c_oflag & TABDLY ) {
- case TAB0:
- printf( "TAB0 " );
- break;
-
- case TAB1:
- printf( "TAB1 " );
- break;
-
- case TAB2:
- printf( "TAB2 " );
- break;
-
- case TAB3:
- printf( "TAB3 " );
- break;
- }
-
- switch( tp->c_oflag & BSDLY ) {
- case BS0:
- printf( "BS0 " );
- break;
-
- case BS1:
- printf( "BS1 " );
- break;
- }
-
- switch( tp->c_oflag & VTDLY ) {
- case VT0:
- printf( "VT0 " );
- break;
-
- case VT1:
- printf( "VT1 " );
- break;
- }
-
- switch( tp->c_oflag & FFDLY ) {
- case FF0:
- printf( "FF0" );
- break;
-
- case FF1:
- printf( "FF1" );
- break;
- }
- printf( "\n" );
-}
-
-
-void print_c_lflag( struct termios * tp )
-{
- char * c_lflag_bits [] = {
- "ISIG", /* 0000001 */
- "ICANON", /* 0000002 */
- "XCASE", /* 0000004 */
- "ECHO", /* 0000010 */
- "ECHOE", /* 0000020 */
- "ECHOK", /* 0000040 */
- "ECHONL", /* 0000100 */
- "NOFLSH", /* 0000200 */
- "TOSTOP", /* 0000400 */
- "ECHOCTL", /* 0001000 */
- "ECHOPRT", /* 0002000 */
- "ECHOKE", /* 0004000 */
- "FLUSHO", /* 0010000 */
- "unknown", /* 0020000 */
- "PENDIN", /* 0040000 */
- "IEXTEN", /* 0100000 */
- "unknown", /* 0200000 */
- "unknown", /* 0400000 */
- "unknown", /* 1000000 */
- "unknown", /* 2000000 */
- "unknown", /* 4000000 */
- };
-
- printf( "c_lflag = 0x%08x\n\t", tp->c_lflag );
- print_32bits( tp->c_lflag, sizeof( c_lflag_bits )/sizeof( char * ), c_lflag_bits );
- printf( "\n" );
-}
-
-
-void print_c_cflag( struct termios * tp )
-{
- unsigned int baud;
-
- printf( "c_cflag = 0x%08x\n", tp->c_cflag );
-
- baud = (tp->c_cflag & CBAUD) ;
-#if defined(__sh2__)
- if ( tp->c_cflag & CBAUDEX )
-#endif
- switch( baud ) {
- case B0:
- printf( "\tCBAUD =\tB0\n" );
- break;
-
- case B50:
- printf( "\tCBAUD =\tB50\n" );
- break;
-
- case B75:
- printf( "\tCBAUD =\tB75\n" );
- break;
-
- case B110:
- printf( "\tCBAUD =\tB110\n" );
- break;
-
- case B134:
- printf( "\tCBAUD =\tB134\n" );
- break;
-
- case B150:
- printf( "\tCBAUD =\tB150\n" );
- break;
-
- case B200:
- printf( "\tCBAUD =\tB200\n" );
- break;
-
- case B300:
- printf( "\tCBAUD =\tB300\n" );
- break;
-
- case B600:
- printf( "\tCBAUD =\tB600\n" );
- break;
-
- case B1200:
- printf( "\tCBAUD =\tB1200\n" );
- break;
-
- case B1800:
- printf( "\tCBAUD =\tB1800\n" );
- break;
-
- case B2400:
- printf( "\tCBAUD =\tB2400\n" );
- break;
-
- case B4800:
- printf( "\tCBAUD =\tB4800\n" );
- break;
-
- case B9600:
- printf( "\tCBAUD =\tB9600\n" );
- break;
-
- case B19200:
- printf( "\tCBAUD =\tB19200\n" );
- break;
-
- case B38400:
- printf( "\tCBAUD =\tB38400\n" );
- break;
-#if defined(__sh2__)
- }
- else
- switch ( baud )
- {
-#endif
- case B57600:
- printf( "\tCBAUD =\tB57600\n" );
- break;
-
- case B115200:
- printf( "\tCBAUD =\tB115200\n" );
- break;
-
- case B230400:
- printf( "\tCBAUD =\tB230400\n" );
- break;
-
- case B460800:
- printf( "\tCBAUD =\tB460800\n" );
- break;
-
- default:
- printf( "\tCBAUD =\tunknown (0x%08x)\n", baud );
- break;
- }
-
- switch( tp->c_cflag & CSIZE ) {
- case CS5:
- printf( "\tCSIZE =\tCS5\n" );
- break;
-
- case CS6:
- printf( "\tCSIZE =\tCS6\n" );
- break;
-
- case CS7:
- printf( "\tCSIZE =\tCS7\n" );
- break;
-
- case CS8:
- printf( "\tCSIZE =\tCS8\n" );
- break;
- }
-
- if( tp->c_cflag & CSTOPB )
- printf( "\tCSTOPB set: send 2 stop bits\n" );
- else
- printf( "\tCSTOPB clear: send 1 stop bit\n" );
-
- if( tp->c_cflag & PARENB )
- printf( "\tPARENB set: parity enabled\n" );
- else
- printf( "\tPARENB clear: parity disabled\n" );
-
- if( tp->c_cflag & PARODD )
- printf( "\tPARODD set: parity odd\n" );
- else
- printf( "\tPARODD clear: parity even\n" );
-
- if( tp->c_cflag & CREAD )
- printf( "\tCREAD set: receiver enabled\n" );
- else
- printf( "\tCREAD clear: treceiver disabled\n" );
-
- if( tp->c_cflag & HUPCL )
- printf( "\tHUPCL set: enabled\n" );
- else
- printf( "\tHUPCL clear: disabled\n" );
-
- if( tp->c_cflag & CLOCAL )
- printf( "\tCLOCAL set: ignore modem lines\n" );
- else
- printf( "\tCLOCAL clear: don't ignore modem lines\n" );
-
-#if defined(CBAUDEX)
- if( tp->c_cflag & CBAUDEX )
- printf( "\tCBAUDEX set: What does this do?\n" );
- else
- printf( "\tCBAUDEX clear: What does this do?\n" );
-#endif
-
- if( tp->c_cflag & CRTSCTS )
- printf( "\tCRTSCTS: harware flow control enabled?\n" );
- else
- printf( "\tCRTSCTS: hardware flow control disabled?\n" );
-}
-
-
-void print_c_cc( struct termios * tp )
-{
- int i;
- char * cc_index_names [NCCS] = {
- "[VINTR] ", /* 0 */
- "[VQUIT] ", /* 1 */
- "[VERASE] ", /* 2 */
- "[VKILL] ", /* 3 */
- "[VEOF] ", /* 4 */
- "[VTIME] ", /* 5 */
- "[VMIN] ", /* 6 */
- "[VSWTC ", /* 7 */
- "[VSTART] ", /* 8 */
- "[VSTOP] ", /* 9 */
- "[VSUSP] ", /* 10 */
- "[VEOL] ", /* 11 */
- "[VREPRINT]", /* 12 */
- "[VDISCARD]", /* 13 */
- "[VWERASE] ", /* 14 */
- "[VLNEXT ", /* 15 */
- "[VEOL2] ", /* 16 */
- "unknown ", /* 17 */
- "unknown ", /* 18 */
- };
-
- for( i = 0; i < NCCS; i++ ) {
- printf( "c_cc%s = 0x%08x\n", cc_index_names[i], tp->c_cc[i] );
- }
-}
-
-
-void print_termios( struct termios *tp )
-{
- printf( "\nLooking at the current termios settings:\n\n" );
- print_c_iflag( tp );
- print_c_oflag( tp );
- print_c_cflag( tp );
- print_c_lflag( tp );
- print_c_cc( tp );
- printf( "\n" );
-}
-
-
-unsigned long get_baud_rate( void )
-{
- unsigned long baud_rate;
-
- while( TRUE ) {
- printf( "Enter the numerical value for the new baud rate.\n" );
- printf( "Choices are: 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800\n" );
- printf( "2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800\n" );
- printf( "\nYour choice: " );
- scanf( "%lu", &baud_rate );
- printf( "\n" );
- switch( baud_rate ) {
- case 50: return B50;
- case 75: return B75;
- case 110: return B110;
- case 134: return B134;
- case 150: return B150;
- case 200: return B200;
- case 300: return B300;
- case 600: return B600;
- case 1200: return B1200;
- case 1800: return B1800;
- case 2400: return B2400;
- case 4800: return B4800;
- case 9600: return B9600;
- case 19200: return B19200;
- case 38400: return B38400;
- case 57600: return B57600;
- case 115200: return B115200;
- case 230400: return B230400;
- case 460800: return B460800;
-
- default:
- printf( "%lu is not a valid choice. Try again.\n\n", baud_rate );
- break;
- }
- }
-}
-
-
-unsigned long get_parity()
-{
- int parity;
-
- while( TRUE ) {
- printf( "Enter the numerical value for the new parity\n" );
- printf( "Choices are: 0 for no parity, 1 for even parity, 2 for odd parity\n" );
- printf( "\nYour choice: " );
- scanf( "%d", &parity );
- printf( "\n" );
- switch( parity ) {
- case 0:
- return 0;
-
- case 1:
- return PARENB;
-
- case 2:
- return PARENB | PARODD;
-
- default:
- printf( "%d is not a valid choice. Try again.\n\n", parity );
- break;
- }
- }
-}
-
-
-unsigned long get_stop_bits()
-{
- int stop_bits;
-
- while( TRUE ) {
- printf( "Enter the numerical value for the new number of stop bits\n" );
- printf( "Choices are: 1 or 2\n" );
- printf( "\nYour choice: " );
- scanf( "%d", &stop_bits );
- printf( "\n" );
- switch( stop_bits ) {
- case 1:
- return 0;
-
- case 2:
- return CSTOPB;
-
- default:
- printf( "%d is not a valid choice. Try again.\n\n", stop_bits );
- break;
- }
- }
-}
-
-
-unsigned long get_data_bits()
-{
- int data_bits;
-
- while( TRUE ) {
- printf( "Enter the numerical value for the new number of data bits\n" );
- printf( "Choices are: 5, 6, 7 or 8\n" );
- printf( "\nYour choice: " );
- scanf( "%d", &data_bits );
- printf( "\n" );
- switch( data_bits ) {
- case 5:
- return CS5;
-
- case 6:
- return CS6;
-
- case 7:
- return CS7;
-
- case 8:
- return CS8;
-
- default:
- printf( "%d is not a valid choice. Try again.\n\n", data_bits );
- break;
- }
- }
-}
-
-
-void change_line_settings( struct termios *tp )
-{
- unsigned long baud_rate, parity, stop_bits, data_bits, sleep_time;
-
- printf( "\nSetting line characteristics\n\n" );
-
- baud_rate = get_baud_rate();
- parity = get_parity();
- stop_bits = get_stop_bits();
- data_bits = get_data_bits();
-
- printf( "NOTE: You will not see output until you switch your terminal settings!\n" );
- printf( "WARNING: If you do not switch your terminal settings, your terminal may hang.\n" );
- printf( "Enter the number of seconds the test will wait for you to switch your terminal\n" );
- printf( "settings before it continues\n" );
- printf( "Sleep time (in seconds): " );
- scanf( "%lu", &sleep_time );
- printf( "\n" );
- printf( "Setting line to new termios settings in %lu seconds.\n", sleep_time );
-
- sleep( sleep_time );
-
- tp->c_cflag = CLOCAL | CREAD | parity | stop_bits | data_bits | baud_rate;
- if( tcsetattr( fileno( stdin ), TCSADRAIN, tp ) < 0 ) {
- perror( "change_line_settings(): tcsetattr() failed" );
- rtems_test_exit( 1 );
- }
- printf( "Line settings set.\n" );
-}
-
-
-void canonical_input( struct termios *tp )
-{
- char c, first_time = TRUE;
-
- printf( "\nTesting canonical input\n\n" );
-
- printf( "Setting line to canonical input mode.\n" );
- tp->c_lflag = ISIG | ICANON | ECHO | ECHONL | ECHOK | ECHOE | ECHOPRT | ECHOCTL | IEXTEN;
- tp->c_iflag = BRKINT | ICRNL | IXON | IMAXBEL;
- if( tcsetattr( fileno( stdin ), TCSADRAIN, tp ) < 0 ) {
- perror( "canonical_input(): tcsetattr() failed" );
- rtems_test_exit( 1 );
- }
-
- while ( ( c = getchar () ) != '\n');
- printf( "Testing getchar(). Type some text followed by carriage return\n" );
- printf( "Each character you entered will be echoed back to you\n\n" );
- while ( ( c = getchar () ) != '\n') {
- if( first_time ) {
- printf( "\nYou typed:\n");
- first_time = FALSE;
- }
- printf( "%c", c );
- }
- printf( "\n\nCanonical input test done.\n" );
-}
-
-
-/*
- * Test raw (ICANON=0) input
- */
-void do_raw_input( int vmin, int vtime )
-{
- int i;
- struct termios old, new;
- rtems_interval ticksPerSecond, then, now;
- unsigned int msec;
- unsigned long count;
- int nread;
- unsigned char cbuf[100];
-
- printf( "Raw input test with VMIN=%d VTIME=%d\n", vmin, vtime );
-
- rtems_clock_get( RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticksPerSecond );
- if ( tcgetattr( fileno ( stdin ), &old ) < 0 ) {
- perror( "do_raw_input(): tcgetattr() failed" );
- return;
- }
-
- new = old;
- new.c_lflag &= ~( ICANON | ECHO | ECHONL | ECHOK | ECHOE | ECHOPRT | ECHOCTL );
- new.c_cc[VMIN] = vmin;
- new.c_cc[VTIME] = vtime;
- if( tcsetattr( fileno( stdin ), TCSADRAIN, &new ) < 0 ) {
- perror ("do_raw_input(): tcsetattr() failed" );
- return;
- }
-
- do {
- rtems_clock_get( RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &then );
- count = 0;
- for(;;) {
- nread = read( fileno( stdin ), cbuf, sizeof cbuf );
- if( nread < 0 ) {
- perror( "do_raw_input(): read() failed" );
- goto out;
- }
- count++;
- if( nread != 0 )
- break;
- }
- rtems_clock_get( RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &now );
- msec = (now - then) * 1000 / ticksPerSecond;
- printf( "Count:%-10lu Interval:%3u.%3.3d Char:",
- count, msec / 1000, msec % 1000 );
-
- for( i = 0 ; i < nread ; i++ )
- printf (" 0x%2.2x", cbuf[i]);
- printf ("\n");
-
- } while( cbuf[0] != 'q' );
-
-out:
- if( tcsetattr( fileno( stdin ), TCSADRAIN, &old) < 0 )
- perror("do_raw_input(): tcsetattr() failed: %s\n" );
-
- printf ("*** End of Raw input VMIN=%d VTIME=%d ***\n", vmin, vtime);
-}
-
-
-static void raw_input( struct termios *tp )
-{
- printf( "\nTesting raw input input\n\n" );
- printf( "Hit 'q' to terminate the test\n" );
-
- do_raw_input( 0, 0 );
- do_raw_input( 0, 20 );
- do_raw_input( 5, 0 );
- do_raw_input( 5, 20 );
-
- printf( "\nRaw input test done.\n" );
-}
-
-
-void usage( void )
-{
- printf( "\nYou have the following choices:\n" );
- printf( " 1 - Reset the struct termios\n" );
- printf( " 2 - Look at the current termios setting\n" );
- printf( " 3 - Change the line characteristics\n" );
- printf( " 4 - Test canonical input\n" );
- printf( " 5 - Test raw input\n" );
- printf( " 9 - Exit\n" );
- printf( "Enter your choice (1 to 5 or 9, followed by a carriage return): " );
-}
-
-
-/*
- * RTEMS Startup Task
- */
-rtems_task
-Init (rtems_task_argument ignored)
-{
- char c ;
- struct termios orig_termios, test_termios;
-
- printf( "\n\n*** TEST OF TERMIOS INPUT CAPABILITIES ***\n" );
-
- if( tcgetattr( fileno( stdin ), &orig_termios ) < 0 ) {
- perror( "tcgetattr() failed" );
- rtems_test_exit( 0 );
- }
-
- test_termios = orig_termios;
-
- usage();
- for(;;) {
- switch( c = getchar() ) {
- case '1':
- printf( "\nResetting the line to the original termios setting\n\n" );
- test_termios = orig_termios;
- if( tcsetattr( fileno( stdin ), TCSADRAIN, &test_termios ) < 0 ) {
- perror( "tcsetattr() failed" );
- rtems_test_exit( 1 );
- }
- usage();
- break;
-
- case '2':
- print_termios( &test_termios );
- usage();
- break;
-
- case '3':
- change_line_settings( &test_termios );
- usage();
- break;
-
- case '4':
- canonical_input( &test_termios );
- usage();
- break;
-
- case '5':
- raw_input( &test_termios );
- usage();
- break;
-
- case '9':
- rtems_test_exit( 1 );
-
- case '\n':
- break;
-
- default:
- printf( "\n%c is not a valid choice. Try again\n\n", c );
- usage();
- break;
- }
- }
-}
-