diff options
Diffstat (limited to 'c/src/lib')
54 files changed, 672 insertions, 110 deletions
diff --git a/c/src/lib/libbsp/mips/p4000/startup/bspstart.c b/c/src/lib/libbsp/mips/p4000/startup/bspstart.c index bdd0c3074d..7634232bd8 100644 --- a/c/src/lib/libbsp/mips/p4000/startup/bspstart.c +++ b/c/src/lib/libbsp/mips/p4000/startup/bspstart.c @@ -116,4 +116,5 @@ void bsp_start( void ) Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */ Cpu_table.postdriver_hook = bsp_postdriver_hook; Cpu_table.interrupt_stack_size = 4096; + Cpu_table.clicks_per_microsecond = CPU_CLOCK_RATE_MHZ; } diff --git a/c/src/lib/libbsp/mips64orion/p4000/startup/bspstart.c b/c/src/lib/libbsp/mips64orion/p4000/startup/bspstart.c index bdd0c3074d..7634232bd8 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/startup/bspstart.c +++ b/c/src/lib/libbsp/mips64orion/p4000/startup/bspstart.c @@ -116,4 +116,5 @@ void bsp_start( void ) Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */ Cpu_table.postdriver_hook = bsp_postdriver_hook; Cpu_table.interrupt_stack_size = 4096; + Cpu_table.clicks_per_microsecond = CPU_CLOCK_RATE_MHZ; } diff --git a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in index 1e61ebe329..0e4a0923d5 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in @@ -22,10 +22,14 @@ SRCS = README all: $(SRCS) +# We only build the Network library if HAS_NETWORKING was defined +NETWORK_yes_V = dec21140 +NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS = console include pci residual openpic irq vectors start startup \ - bootloader dec21140 wrapup +SUB_DIRS = clock console include pci residual openpic irq vectors \ + start startup bootloader $(NETWORK) wrapup Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ diff --git a/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in new file mode 100644 index 0000000000..62122d9097 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in @@ -0,0 +1,75 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../.. +subdir = powerpc/mcp750/clock + +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + +PGM = ${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES = c_clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) + +H_FILES = + +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(RTEMS_ROOT)/make/leaf.cfg + +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp + +all: ${ARCH} $(SRCS) preinstall $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/clock/c_clock.c b/c/src/lib/libbsp/powerpc/mcp750/clock/c_clock.c new file mode 100644 index 0000000000..b6fafcb7df --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mcp750/clock/c_clock.c @@ -0,0 +1,215 @@ +/* + * Clock Tick Device Driver + * + * This routine utilizes the Decrementer Register common to the PPC family. + * + * The tick frequency is directly programmed to the configured number of + * microseconds per tick. + * + * COPYRIGHT (c) 1989-1997. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may in + * the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to support the MPC750. + * Modifications Copyright (c) 1999 Eric Valette valette@crf.canon.fr + * + * $Id$ + */ + +#include <bsp.h> +#include <bsp/irq.h> +#include <rtems/libio.h> +#include <stdlib.h> /* for atexit() */ +#include <assert.h> +#include <libcpu/cpu.h> + +/* + * Clock ticks since initialization + */ + +volatile rtems_unsigned32 Clock_driver_ticks; + +/* + * This is the value programmed into the count down timer. + */ + +rtems_unsigned32 Clock_Decrementer_value; + +/* + * These are set by clock driver during its init + */ + +rtems_device_major_number rtems_clock_major = ~0; +rtems_device_minor_number rtems_clock_minor; + +void clockOff(const rtems_irq_connect_data* unused) +{ + if (BSP_Configuration.ticks_per_timeslice) { + /* + * Nothing to do as we cannot disable all interrupts and + * the decrementer interrupt enable is MSR_EE + */ + } +} +static void clockOn(const rtems_irq_connect_data* unused) +{ + PPC_Set_decrementer( Clock_Decrementer_value ); +} + +/* + * Clock_isr + * + * This is the clock tick interrupt handler. + * + * Input parameters: + * vector - vector number + * + * Output parameters: NONE + * + * Return values: NONE + * + */ +void clockIsr() +{ + /* + * The driver has seen another tick. + */ + + PPC_Set_decrementer( Clock_Decrementer_value ); + + Clock_driver_ticks += 1; + + /* + * Real Time Clock counter/timer is set to automatically reload. + */ + + rtems_clock_tick(); +} + +int clockIsOn(const rtems_irq_connect_data* unused) +{ + unsigned32 msr_value; + + _CPU_MSR_GET( msr_value ); + if (msr_value & MSR_EE) return 1; + return 0; +} + +static rtems_irq_connect_data clockIrqData = {BSP_DECREMENTER, + clockIsr, + clockOn, + clockOff, + clockIsOn}; + + +/* + * Clock_exit + * + * This routine allows the clock driver to exit by masking the interrupt and + * disabling the clock's counter. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * Return values: NONE + * + */ + +void Clock_exit( void ) +{ + if ( BSP_Configuration.ticks_per_timeslice ) { + BSP_remove_rtems_irq_handler (&clockIrqData); + } +} + +/* + * Clock_initialize + * + * This routine initializes the clock driver. + * + * Input parameters: + * major - clock device major number + * minor - clock device minor number + * parg - pointer to optional device driver arguments + * + * Output parameters: NONE + * + * Return values: + * rtems_device_driver status code + */ + +rtems_device_driver Clock_initialize( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + Clock_Decrementer_value = (BSP_bus_frequency/4000)* + (BSP_Configuration.microseconds_per_tick/1000); + + if (!BSP_install_rtems_irq_handler (&clockIrqData)) { + printk("Unable to initialize system clock\n"); + rtems_fatal_error_occurred(1); + } + /* make major/minor avail to others such as shared memory driver */ + + rtems_clock_major = major; + rtems_clock_minor = minor; + + return RTEMS_SUCCESSFUL; +} /* Clock_initialize */ + +/* + * Clock_control + * + * This routine is the clock device driver control entry point. + * + * Input parameters: + * major - clock device major number + * minor - clock device minor number + * parg - pointer to optional device driver arguments + * + * Output parameters: NONE + * + * Return values: + * rtems_device_driver status code + */ + +rtems_device_driver Clock_control( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + rtems_unsigned32 isrlevel; + rtems_libio_ioctl_args_t *args = pargp; + + if (args == 0) + goto done; + + Clock_Decrementer_value = (BSP_bus_frequency/4000)* + (BSP_Configuration.microseconds_per_tick/1000); + + if (args->command == rtems_build_name('I', 'S', 'R', ' ')) + clockIsr(); + else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) + { + if (!BSP_install_rtems_irq_handler (&clockIrqData)) { + printk("Error installing clock interrupt handler!\n"); + rtems_fatal_error_occurred(1); + } + } +done: + return RTEMS_SUCCESSFUL; +} + + + + + + diff --git a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in index f4f6d6d6fe..005283840d 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in @@ -13,7 +13,11 @@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES = console irq openpic pci residual startup dec21140 vectors +# We only build the Network library if HAS_NETWORKING was defined +NETWORK_yes_V = dec21140 +NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) + +BSP_PIECES = clock console irq openpic pci residual startup $(NETWORK) vectors GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in index 1e61ebe329..0e4a0923d5 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in @@ -22,10 +22,14 @@ SRCS = README all: $(SRCS) +# We only build the Network library if HAS_NETWORKING was defined +NETWORK_yes_V = dec21140 +NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS = console include pci residual openpic irq vectors start startup \ - bootloader dec21140 wrapup +SUB_DIRS = clock console include pci residual openpic irq vectors \ + start startup bootloader $(NETWORK) wrapup Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in new file mode 100644 index 0000000000..62122d9097 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in @@ -0,0 +1,75 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../.. +subdir = powerpc/mcp750/clock + +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + +PGM = ${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES = c_clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) + +H_FILES = + +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(RTEMS_ROOT)/make/leaf.cfg + +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp + +all: ${ARCH} $(SRCS) preinstall $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/c_clock.c b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/c_clock.c new file mode 100644 index 0000000000..b6fafcb7df --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/c_clock.c @@ -0,0 +1,215 @@ +/* + * Clock Tick Device Driver + * + * This routine utilizes the Decrementer Register common to the PPC family. + * + * The tick frequency is directly programmed to the configured number of + * microseconds per tick. + * + * COPYRIGHT (c) 1989-1997. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may in + * the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to support the MPC750. + * Modifications Copyright (c) 1999 Eric Valette valette@crf.canon.fr + * + * $Id$ + */ + +#include <bsp.h> +#include <bsp/irq.h> +#include <rtems/libio.h> +#include <stdlib.h> /* for atexit() */ +#include <assert.h> +#include <libcpu/cpu.h> + +/* + * Clock ticks since initialization + */ + +volatile rtems_unsigned32 Clock_driver_ticks; + +/* + * This is the value programmed into the count down timer. + */ + +rtems_unsigned32 Clock_Decrementer_value; + +/* + * These are set by clock driver during its init + */ + +rtems_device_major_number rtems_clock_major = ~0; +rtems_device_minor_number rtems_clock_minor; + +void clockOff(const rtems_irq_connect_data* unused) +{ + if (BSP_Configuration.ticks_per_timeslice) { + /* + * Nothing to do as we cannot disable all interrupts and + * the decrementer interrupt enable is MSR_EE + */ + } +} +static void clockOn(const rtems_irq_connect_data* unused) +{ + PPC_Set_decrementer( Clock_Decrementer_value ); +} + +/* + * Clock_isr + * + * This is the clock tick interrupt handler. + * + * Input parameters: + * vector - vector number + * + * Output parameters: NONE + * + * Return values: NONE + * + */ +void clockIsr() +{ + /* + * The driver has seen another tick. + */ + + PPC_Set_decrementer( Clock_Decrementer_value ); + + Clock_driver_ticks += 1; + + /* + * Real Time Clock counter/timer is set to automatically reload. + */ + + rtems_clock_tick(); +} + +int clockIsOn(const rtems_irq_connect_data* unused) +{ + unsigned32 msr_value; + + _CPU_MSR_GET( msr_value ); + if (msr_value & MSR_EE) return 1; + return 0; +} + +static rtems_irq_connect_data clockIrqData = {BSP_DECREMENTER, + clockIsr, + clockOn, + clockOff, + clockIsOn}; + + +/* + * Clock_exit + * + * This routine allows the clock driver to exit by masking the interrupt and + * disabling the clock's counter. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * Return values: NONE + * + */ + +void Clock_exit( void ) +{ + if ( BSP_Configuration.ticks_per_timeslice ) { + BSP_remove_rtems_irq_handler (&clockIrqData); + } +} + +/* + * Clock_initialize + * + * This routine initializes the clock driver. + * + * Input parameters: + * major - clock device major number + * minor - clock device minor number + * parg - pointer to optional device driver arguments + * + * Output parameters: NONE + * + * Return values: + * rtems_device_driver status code + */ + +rtems_device_driver Clock_initialize( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + Clock_Decrementer_value = (BSP_bus_frequency/4000)* + (BSP_Configuration.microseconds_per_tick/1000); + + if (!BSP_install_rtems_irq_handler (&clockIrqData)) { + printk("Unable to initialize system clock\n"); + rtems_fatal_error_occurred(1); + } + /* make major/minor avail to others such as shared memory driver */ + + rtems_clock_major = major; + rtems_clock_minor = minor; + + return RTEMS_SUCCESSFUL; +} /* Clock_initialize */ + +/* + * Clock_control + * + * This routine is the clock device driver control entry point. + * + * Input parameters: + * major - clock device major number + * minor - clock device minor number + * parg - pointer to optional device driver arguments + * + * Output parameters: NONE + * + * Return values: + * rtems_device_driver status code + */ + +rtems_device_driver Clock_control( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + rtems_unsigned32 isrlevel; + rtems_libio_ioctl_args_t *args = pargp; + + if (args == 0) + goto done; + + Clock_Decrementer_value = (BSP_bus_frequency/4000)* + (BSP_Configuration.microseconds_per_tick/1000); + + if (args->command == rtems_build_name('I', 'S', 'R', ' ')) + clockIsr(); + else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) + { + if (!BSP_install_rtems_irq_handler (&clockIrqData)) { + printk("Error installing clock interrupt handler!\n"); + rtems_fatal_error_occurred(1); + } + } +done: + return RTEMS_SUCCESSFUL; +} + + + + + + diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in index f4f6d6d6fe..005283840d 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in @@ -13,7 +13,11 @@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES = console irq openpic pci residual startup dec21140 vectors +# We only build the Network library if HAS_NETWORKING was defined +NETWORK_yes_V = dec21140 +NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) + +BSP_PIECES = clock console irq openpic pci residual startup $(NETWORK) vectors GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x diff --git a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in index 4d6988d22c..e8ce41d7da 100644 --- a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in @@ -21,8 +21,9 @@ GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) LIB = $(ARCH)/libbsp.a include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg diff --git a/c/src/lib/libcpu/hppa1.1/clock/Makefile.in b/c/src/lib/libcpu/hppa1.1/clock/Makefile.in index 185ca8c78e..5670ecbcbd 100644 --- a/c/src/lib/libcpu/hppa1.1/clock/Makefile.in +++ b/c/src/lib/libcpu/hppa1.1/clock/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/hppa1.1/clock/clock.c b/c/src/lib/libcpu/hppa1.1/clock/clock.c index 1dcfa665ec..a0588e57fd 100644 --- a/c/src/lib/libcpu/hppa1.1/clock/clock.c +++ b/c/src/lib/libcpu/hppa1.1/clock/clock.c @@ -19,7 +19,6 @@ /* should get this from bsp.h, but it is not installed yet */ rtems_isr_entry set_vector(rtems_isr_entry, rtems_vector_number, int); -extern rtems_configuration_table BSP_Configuration; #include <stdlib.h> /* for atexit() */ @@ -103,10 +102,9 @@ void Install_clock(rtems_isr_entry clock_isr) Clock_clicks_interrupt = 0; Clock_clicks = 0; - Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000; + Clock_isrs = rtems_configuration_get_milliseconds_per_tick(); - if (BSP_Configuration.ticks_per_timeslice) - { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* * initialize the interval here * First tick is set to right amount of time in the future @@ -175,7 +173,7 @@ Clock_isr(rtems_vector_number vector) if (Clock_isrs == 1) { rtems_clock_tick(); - Clock_isrs = BSP_Configuration.microseconds_per_tick / 10000; + Clock_isrs = rtems_configuration_get_milliseconds_per_tick(); if (Clock_isrs == 0) Clock_isrs = 1; } @@ -191,8 +189,7 @@ Clock_isr(rtems_vector_number vector) void Clock_exit(void) { - if ( BSP_Configuration.ticks_per_timeslice ) - { + if ( rtems_configuration_get_ticks_per_timeslice() ) { (void) set_vector(0, HPPA_INTERRUPT_EXTERNAL_INTERVAL_TIMER, 1); } } diff --git a/c/src/lib/libcpu/hppa1.1/include/Makefile.in b/c/src/lib/libcpu/hppa1.1/include/Makefile.in index 9efc79396e..a6bbbdafc0 100644 --- a/c/src/lib/libcpu/hppa1.1/include/Makefile.in +++ b/c/src/lib/libcpu/hppa1.1/include/Makefile.in @@ -1,10 +1,6 @@ # # $Id$ # -# Install any include files needed by libcpu. -# Mainly this just means bsp.h which would normally be installed -# after libcpu is built. -# This is a bit of a hack. @SET_MAKE@ srcdir = @srcdir@ diff --git a/c/src/lib/libcpu/hppa1.1/milli/Makefile.in b/c/src/lib/libcpu/hppa1.1/milli/Makefile.in index ae63b98a98..8c07e39d1a 100644 --- a/c/src/lib/libcpu/hppa1.1/milli/Makefile.in +++ b/c/src/lib/libcpu/hppa1.1/milli/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/hppa1.1/semaphore/semaphore.c b/c/src/lib/libcpu/hppa1.1/semaphore/semaphore.c index 3819736d03..011827dc75 100644 --- a/c/src/lib/libcpu/hppa1.1/semaphore/semaphore.c +++ b/c/src/lib/libcpu/hppa1.1/semaphore/semaphore.c @@ -16,7 +16,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include "semaphore.h" @@ -123,7 +123,11 @@ hppa_semaphore_pool_initialize(void *pool_base, * If we are node0, then init all in the pool */ +#if 0 if (cpu_number == 0) +#else + if (_Configuration_Table->User_multiprocessing_table->node == 1) +#endif { /* * Tell other cpus we are not done, jic @@ -139,7 +143,11 @@ hppa_semaphore_pool_initialize(void *pool_base, * Tell other cpus we are done, or wait for it to be done if on another cpu */ +#if 0 if (cpu_number == 0) +#else + if (_Configuration_Table->User_multiprocessing_table->node == 1) +#endif SEM_CONTROL->user = rtems_build_name('D', 'O', 'N', 'E'); else while (SEM_CONTROL->user != rtems_build_name('D', 'O', 'N', 'E')) diff --git a/c/src/lib/libcpu/hppa1.1/timer/Makefile.in b/c/src/lib/libcpu/hppa1.1/timer/Makefile.in index 8b4b6281f4..08bbf81e83 100644 --- a/c/src/lib/libcpu/hppa1.1/timer/Makefile.in +++ b/c/src/lib/libcpu/hppa1.1/timer/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in b/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in index e8cf8820c6..f1a418ece2 100644 --- a/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in +++ b/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in @@ -66,8 +66,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/mips/clock/ckinit.c b/c/src/lib/libcpu/mips/clock/ckinit.c index 60b3187223..c0cdd6f898 100644 --- a/c/src/lib/libcpu/mips/clock/ckinit.c +++ b/c/src/lib/libcpu/mips/clock/ckinit.c @@ -43,13 +43,20 @@ #include <rtems.h> #include <rtems/libio.h> -#include <bsp.h> #define EXT_INT5 0x8000 /* external interrupt 5 */ #include "clock.h" +/* formerly in the BSP */ +#if 0 #define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) /* equivalent to CPU clock speed in MHz */ +#endif + +#define CLOCKS_PER_MICROSECOND \ + rtems_cpu_configuration_get_clicks_per_microsecond() +/* to avoid including the bsp */ +mips_isr_entry set_vector( rtems_isr_entry, rtems_vector_number, int ); void Clock_exit( void ); rtems_isr Clock_isr( rtems_vector_number vector ); @@ -152,20 +159,20 @@ void Install_clock( */ Clock_driver_ticks = 0; - Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000; + Clock_isrs = rtems_configuration_get_milliseconds_per_tick(); /* * If ticks_per_timeslice is configured as non-zero, then the user * wants a clock tick. */ - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 ); /* * Hardware specific initialize goes here */ - mips_timer_rate = BSP_Configuration.microseconds_per_tick * CLOCKS_PER_MICROSECOND; + mips_timer_rate = rtems_configuration_get_microseconds_per_tick() * CLOCKS_PER_MICROSECOND; mips_set_timer( mips_timer_rate ); enable_int(CLOCK_VECTOR_MASK); } @@ -183,11 +190,9 @@ void Install_clock( void Clock_exit( void ) { - if ( BSP_Configuration.ticks_per_timeslice ) { - + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* mips: turn off the timer interrupts */ disable_int(CLOCK_VECTOR_MASK); - } } diff --git a/c/src/lib/libcpu/mips/timer/timer.c b/c/src/lib/libcpu/mips/timer/timer.c index 167a9b3804..dc7c61157e 100644 --- a/c/src/lib/libcpu/mips/timer/timer.c +++ b/c/src/lib/libcpu/mips/timer/timer.c @@ -47,7 +47,6 @@ #include <rtems.h> -#include <bsp.h> #define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) #define TIMER_MAX_VALUE 0xffffffff diff --git a/c/src/lib/libcpu/mips64orion/clock/ckinit.c b/c/src/lib/libcpu/mips64orion/clock/ckinit.c index 60b3187223..c0cdd6f898 100644 --- a/c/src/lib/libcpu/mips64orion/clock/ckinit.c +++ b/c/src/lib/libcpu/mips64orion/clock/ckinit.c @@ -43,13 +43,20 @@ #include <rtems.h> #include <rtems/libio.h> -#include <bsp.h> #define EXT_INT5 0x8000 /* external interrupt 5 */ #include "clock.h" +/* formerly in the BSP */ +#if 0 #define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) /* equivalent to CPU clock speed in MHz */ +#endif + +#define CLOCKS_PER_MICROSECOND \ + rtems_cpu_configuration_get_clicks_per_microsecond() +/* to avoid including the bsp */ +mips_isr_entry set_vector( rtems_isr_entry, rtems_vector_number, int ); void Clock_exit( void ); rtems_isr Clock_isr( rtems_vector_number vector ); @@ -152,20 +159,20 @@ void Install_clock( */ Clock_driver_ticks = 0; - Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000; + Clock_isrs = rtems_configuration_get_milliseconds_per_tick(); /* * If ticks_per_timeslice is configured as non-zero, then the user * wants a clock tick. */ - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 ); /* * Hardware specific initialize goes here */ - mips_timer_rate = BSP_Configuration.microseconds_per_tick * CLOCKS_PER_MICROSECOND; + mips_timer_rate = rtems_configuration_get_microseconds_per_tick() * CLOCKS_PER_MICROSECOND; mips_set_timer( mips_timer_rate ); enable_int(CLOCK_VECTOR_MASK); } @@ -183,11 +190,9 @@ void Install_clock( void Clock_exit( void ) { - if ( BSP_Configuration.ticks_per_timeslice ) { - + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* mips: turn off the timer interrupts */ disable_int(CLOCK_VECTOR_MASK); - } } diff --git a/c/src/lib/libcpu/mips64orion/include/Makefile.in b/c/src/lib/libcpu/mips64orion/include/Makefile.in index 2eae888240..60c41999f0 100644 --- a/c/src/lib/libcpu/mips64orion/include/Makefile.in +++ b/c/src/lib/libcpu/mips64orion/include/Makefile.in @@ -1,10 +1,6 @@ # # $Id$ # -# Install any include files needed by libcpu. -# Mainly this just means bsp.h which would normally be installed -# after libcpu is built. -# This is a bit of a hack. @SET_MAKE@ srcdir = @srcdir@ diff --git a/c/src/lib/libcpu/mips64orion/timer/timer.c b/c/src/lib/libcpu/mips64orion/timer/timer.c index 167a9b3804..dc7c61157e 100644 --- a/c/src/lib/libcpu/mips64orion/timer/timer.c +++ b/c/src/lib/libcpu/mips64orion/timer/timer.c @@ -47,7 +47,6 @@ #include <rtems.h> -#include <bsp.h> #define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) #define TIMER_MAX_VALUE 0xffffffff diff --git a/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in index 888379c3d1..3b1b15f228 100644 --- a/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/mpc750/Makefile.in b/c/src/lib/libcpu/powerpc/mpc750/Makefile.in index 499a88ce34..94355ee0c2 100644 --- a/c/src/lib/libcpu/powerpc/mpc750/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc750/Makefile.in @@ -20,7 +20,8 @@ INSTALL_CHANGE = @INSTALL_CHANGE@ # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS = exceptions mmu clock wrapup +# SUB_DIRS = exceptions mmu clock wrapup +SUB_DIRS = exceptions mmu wrapup Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ diff --git a/c/src/lib/libcpu/powerpc/mpc750/wrapup/Makefile.in b/c/src/lib/libcpu/powerpc/mpc750/wrapup/Makefile.in index 11e6d9df59..20d9003998 100644 --- a/c/src/lib/libcpu/powerpc/mpc750/wrapup/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc750/wrapup/Makefile.in @@ -13,7 +13,8 @@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PROC_SPECIFIC_O_PIECES = exceptions mmu clock +# PROC_SPECIFIC_O_PIECES = exceptions mmu clock +PROC_SPECIFIC_O_PIECES = exceptions mmu GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x diff --git a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in index c4178b8077..dfd133eaf1 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c b/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c index bf11c9bcbb..ce27c426a9 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c +++ b/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c @@ -36,7 +36,6 @@ * $Id$ */ -#include <bsp.h> #include <clockdrv.h> #include <rtems/libio.h> @@ -74,7 +73,7 @@ void Install_clock(rtems_isr_entry clock_isr) Clock_driver_ticks = 0; - pit_value = BSP_Configuration.microseconds_per_tick / + pit_value = rtems_configuration_get_microseconds_per_tick() / Cpu_table.clicks_per_usec; if (pit_value == 0) { pit_value = 0xffff; @@ -85,7 +84,7 @@ void Install_clock(rtems_isr_entry clock_isr) if (pit_value > 0xffff) { /* pit is only 16 bits long */ rtems_fatal_error_occurred(-1); } - if (BSP_Configuration.ticks_per_timeslice) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* * initialize the interval here @@ -131,7 +130,7 @@ ReInstall_clock(rtems_isr_entry new_clock_isr) void Clock_exit(void) { - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* disable PIT and PIT interrupts */ m821.piscr &= ~(M821_PISCR_PTE | M821_PISCR_PIE); diff --git a/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c b/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c index 8e8b876379..4b6a3a308b 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c +++ b/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c @@ -42,7 +42,6 @@ * $Id$ */ -#include <bsp.h> #include <rtems/libio.h> #include <mpc821.h> #include <mpc821/console.h> diff --git a/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in index 0eba787c45..7d0bbf9f31 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in @@ -1,10 +1,6 @@ # # $Id$ # -# Install any include files needed by libcpu. -# Mainly this just means bsp.h which would normally be installed -# after libcpu is built. -# This is a bit of a hack. @SET_MAKE@ srcdir = @srcdir@ diff --git a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in index 2bb4b3782a..f1ef92cbe5 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c b/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c index 0700fea807..d9c42e9565 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c +++ b/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c @@ -43,7 +43,6 @@ * $Id$ */ -#include <bsp.h> #include <rtems.h> #include <mpc821.h> diff --git a/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S b/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S index 9a785e347d..98b5ea891a 100644 --- a/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S +++ b/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S @@ -44,7 +44,6 @@ */ #include "asm.h" -/*#include "bsp.h"*/ #define ALIGN_REGS 0x0140 .set CACHE_SIZE,16 # cache line size of 32 bytes diff --git a/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in index aa3be76e89..5ac2b435a0 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/mpc860/clock/clock.c b/c/src/lib/libcpu/powerpc/mpc860/clock/clock.c index d63cd5a5cf..452b939a6d 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/clock/clock.c +++ b/c/src/lib/libcpu/powerpc/mpc860/clock/clock.c @@ -36,7 +36,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include <clockdrv.h> #include <rtems/libio.h> @@ -74,7 +74,7 @@ void Install_clock(rtems_isr_entry clock_isr) Clock_driver_ticks = 0; - pit_value = BSP_Configuration.microseconds_per_tick / + pit_value = rtems_configuration_get_microseconds_per_tick() / Cpu_table.clicks_per_usec; if (pit_value == 0) { pit_value = 0xffff; @@ -85,7 +85,7 @@ void Install_clock(rtems_isr_entry clock_isr) if (pit_value > 0xffff) { /* pit is only 16 bits long */ rtems_fatal_error_occurred(-1); } - if (BSP_Configuration.ticks_per_timeslice) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* * initialize the interval here @@ -131,7 +131,7 @@ ReInstall_clock(rtems_isr_entry new_clock_isr) void Clock_exit(void) { - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* disable PIT and PIT interrupts */ m860.piscr &= ~(M860_PISCR_PTE | M860_PISCR_PIE); diff --git a/c/src/lib/libcpu/powerpc/mpc860/console-generic/console-generic.c b/c/src/lib/libcpu/powerpc/mpc860/console-generic/console-generic.c index 10a858b07e..604bb8734a 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/console-generic/console-generic.c +++ b/c/src/lib/libcpu/powerpc/mpc860/console-generic/console-generic.c @@ -44,7 +44,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include <rtems/libio.h> #include <mpc860.h> #include <mpc860/console.h> diff --git a/c/src/lib/libcpu/powerpc/mpc860/include/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/include/Makefile.in index 9bb0657a74..3d3263f522 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/include/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc860/include/Makefile.in @@ -1,10 +1,6 @@ # # $Id$ # -# Install any include files needed by libcpu. -# Mainly this just means bsp.h which would normally be installed -# after libcpu is built. -# This is a bit of a hack. @SET_MAKE@ srcdir = @srcdir@ diff --git a/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in index 6b7d7361bb..2a52daf5d7 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in +++ b/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/mpc860/timer/timer.c b/c/src/lib/libcpu/powerpc/mpc860/timer/timer.c index c97439f2d6..732ab565a7 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/timer/timer.c +++ b/c/src/lib/libcpu/powerpc/mpc860/timer/timer.c @@ -43,7 +43,6 @@ * $Id$ */ -#include <bsp.h> #include <rtems.h> #include <mpc860.h> diff --git a/c/src/lib/libcpu/powerpc/mpc860/vectors/align_h.S b/c/src/lib/libcpu/powerpc/mpc860/vectors/align_h.S index 9a785e347d..98b5ea891a 100644 --- a/c/src/lib/libcpu/powerpc/mpc860/vectors/align_h.S +++ b/c/src/lib/libcpu/powerpc/mpc860/vectors/align_h.S @@ -44,7 +44,6 @@ */ #include "asm.h" -/*#include "bsp.h"*/ #define ALIGN_REGS 0x0140 .set CACHE_SIZE,16 # cache line size of 32 bytes diff --git a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in index b69e86feea..df95503c19 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in +++ b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c b/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c index 99b538dcd3..dfcbea5535 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c +++ b/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c @@ -37,7 +37,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include <clockdrv.h> #include <rtems/libio.h> @@ -164,11 +164,10 @@ void Install_clock(rtems_isr_entry clock_isr) else if ((pvr & 0xff00) == 0x0100) /* 403GB */ auto_restart = 1; - pit_value = BSP_Configuration.microseconds_per_tick * + pit_value = rtems_configuration_get_microseconds_per_tick() * Cpu_table.clicks_per_usec; - if (BSP_Configuration.ticks_per_timeslice) - { + if ( rtems_configuration_get_ticks_per_timeslice() ) { register rtems_unsigned32 tcr; /* @@ -218,8 +217,7 @@ ReInstall_clock(rtems_isr_entry new_clock_isr) void Clock_exit(void) { - if ( BSP_Configuration.ticks_per_timeslice ) - { + if ( rtems_configuration_get_ticks_per_timeslice() ) { register rtems_unsigned32 tcr; asm volatile ("mfspr %0, 0x3da" : "=r" ((tcr))); /* TCR */ diff --git a/c/src/lib/libcpu/powerpc/ppc403/console/console.c b/c/src/lib/libcpu/powerpc/ppc403/console/console.c index 8d073b672b..b1fc7bfe9c 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/console/console.c +++ b/c/src/lib/libcpu/powerpc/ppc403/console/console.c @@ -56,7 +56,7 @@ #define NO_BSP_INIT -#include <bsp.h> +#include <rtems.h> #include <rtems/libio.h> #include "../ictrl/ictrl.h" #include <stdlib.h> /* for atexit() */ diff --git a/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled b/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled index a623dde95a..e5d3b6fbce 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled +++ b/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled @@ -31,7 +31,7 @@ #define NO_BSP_INIT -#include <bsp.h> +#include <rtems.h> #include <rtems/libio.h> extern rtems_cpu_table Cpu_table; /* owned by BSP */ diff --git a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in index bb29e2c931..9d8d10ee23 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in +++ b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in @@ -69,8 +69,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c b/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c index 11d09f748a..8f808d432d 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c +++ b/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c @@ -21,7 +21,7 @@ */ #include "ictrl.h" -#include <bsp.h> +#include <rtems.h> #include <rtems/libio.h> #include <stdlib.h> /* for atexit() */ diff --git a/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in index 344f4da03d..aafe051965 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in +++ b/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in @@ -1,10 +1,6 @@ # # $Id$ # -# Install any include files needed by libcpu. -# Mainly this just means bsp.h which would normally be installed -# after libcpu is built. -# This is a bit of a hack. @SET_MAKE@ srcdir = @srcdir@ diff --git a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in index af94bb3abf..68f727435c 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in +++ b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in @@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/hppa/BSP/wrapup/Makefile install: all Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status diff --git a/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c b/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c index 0881eef128..0ff48aec90 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c +++ b/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c @@ -34,7 +34,6 @@ * $Id$ */ -#include <bsp.h> #include <rtems.h> extern rtems_cpu_table Cpu_table; /* owned by BSP */ diff --git a/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S b/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S index d16298343d..b8ead27032 100644 --- a/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S +++ b/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S @@ -44,7 +44,7 @@ */ #include "asm.h" -#include "bsp.h" +#include "rtems.h" .set CACHE_SIZE,16 # cache line size of 32 bytes .set CACHE_SIZE_L2,4 # cache line size, log 2 diff --git a/c/src/lib/libcpu/sh/sh7032/clock/ckinit.c b/c/src/lib/libcpu/sh/sh7032/clock/ckinit.c index 885cdbd752..7aef64ed99 100644 --- a/c/src/lib/libcpu/sh/sh7032/clock/ckinit.c +++ b/c/src/lib/libcpu/sh/sh7032/clock/ckinit.c @@ -22,7 +22,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include <stdlib.h> @@ -143,7 +143,7 @@ void Install_clock( */ Clock_driver_ticks = 0; - Clock_isrs_const = BSP_Configuration.microseconds_per_tick / 10000; + Clock_isrs_const = rtems_configuration_get_microseconds_per_tick() / 10000; Clock_isrs = Clock_isrs_const; /* @@ -151,7 +151,7 @@ void Install_clock( * wants a clock tick. */ - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { rtems_interrupt_catch( Clock_isr, CLOCK_VECTOR, &Old_ticker ); /* * Hardware specific initialize goes here @@ -191,7 +191,7 @@ void Install_clock( rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); /* set counter limits */ - write16( _ITU_COUNTER0_MICROSECOND * BSP_Configuration.microseconds_per_tick, + write16( _ITU_COUNTER0_MICROSECOND * rtems_configuration_get_microseconds_per_tick(), ITU_GRA0); /* start counter */ @@ -214,7 +214,7 @@ void Install_clock( void Clock_exit( void ) { unsigned8 temp8 = 0; - if ( BSP_Configuration.ticks_per_timeslice ) { + if ( rtems_configuration_get_ticks_per_timeslice() ) { /* turn off the timer interrupts */ /* set interrupt priority to 0 */ diff --git a/c/src/lib/libcpu/sh/sh7032/console/console.c b/c/src/lib/libcpu/sh/sh7032/console/console.c index db308cbb55..6c16adfa5f 100644 --- a/c/src/lib/libcpu/sh/sh7032/console/console.c +++ b/c/src/lib/libcpu/sh/sh7032/console/console.c @@ -30,6 +30,7 @@ */ #include <bsp.h> +#include <rtems.h> #include <rtems/libio.h> #include <iosupp.h> diff --git a/c/src/lib/libcpu/sh/sh7032/include/sci.h b/c/src/lib/libcpu/sh/sh7032/include/sci.h index 1b1633a488..d897003315 100644 --- a/c/src/lib/libcpu/sh/sh7032/include/sci.h +++ b/c/src/lib/libcpu/sh/sh7032/include/sci.h @@ -26,7 +26,7 @@ #define _sh_sci_h #ifdef __cplusplus -extern"C" { +extern "C" { #endif /* diff --git a/c/src/lib/libcpu/sh/sh7032/timer/timer.c b/c/src/lib/libcpu/sh/sh7032/timer/timer.c index ddf8bfc06b..03ffdd7e56 100644 --- a/c/src/lib/libcpu/sh/sh7032/timer/timer.c +++ b/c/src/lib/libcpu/sh/sh7032/timer/timer.c @@ -29,7 +29,7 @@ * $Id$ */ -#include <bsp.h> +#include <rtems.h> #include <rtems/score/sh_io.h> #include <rtems/score/iosh7030.h> |