diff options
Diffstat (limited to 'c/src/lib/libcpu/sparc/include/erc32.h')
| -rw-r--r-- | c/src/lib/libcpu/sparc/include/erc32.h | 521 |
1 files changed, 0 insertions, 521 deletions
diff --git a/c/src/lib/libcpu/sparc/include/erc32.h b/c/src/lib/libcpu/sparc/include/erc32.h deleted file mode 100644 index aa0eef05d9..0000000000 --- a/c/src/lib/libcpu/sparc/include/erc32.h +++ /dev/null @@ -1,521 +0,0 @@ -/* erc32.h - * - * This include file contains information pertaining to the ERC32. - * The ERC32 is a custom SPARC V7 implementation based on the Cypress - * 601/602 chipset. This CPU has a number of on-board peripherals and - * was developed by the European Space Agency to target space applications. - * - * NOTE: Other than where absolutely required, this version currently - * supports only the peripherals and bits used by the basic board - * support package. This includes at least significant pieces of - * the following items: - * - * + UART Channels A and B - * + General Purpose Timer - * + Real Time Clock - * + Watchdog Timer (so it can be disabled) - * + Control Register (so powerdown mode can be enabled) - * + Memory Control Register - * + Interrupt Control - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#ifndef _INCLUDE_ERC32_h -#define _INCLUDE_ERC32_h - -#include <rtems/score/sparc.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Interrupt Sources - * - * The interrupt source numbers directly map to the trap type and to - * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask, - * and the Interrupt Pending Registers. - */ - -#define ERC32_INTERRUPT_MASKED_ERRORS 1 -#define ERC32_INTERRUPT_EXTERNAL_1 2 -#define ERC32_INTERRUPT_EXTERNAL_2 3 -#define ERC32_INTERRUPT_UART_A_RX_TX 4 -#define ERC32_INTERRUPT_UART_B_RX_TX 5 -#define ERC32_INTERRUPT_CORRECTABLE_MEMORY_ERROR 6 -#define ERC32_INTERRUPT_UART_ERROR 7 -#define ERC32_INTERRUPT_DMA_ACCESS_ERROR 8 -#define ERC32_INTERRUPT_DMA_TIMEOUT 9 -#define ERC32_INTERRUPT_EXTERNAL_3 10 -#define ERC32_INTERRUPT_EXTERNAL_4 11 -#define ERC32_INTERRUPT_GENERAL_PURPOSE_TIMER 12 -#define ERC32_INTERRUPT_REAL_TIME_CLOCK 13 -#define ERC32_INTERRUPT_EXTERNAL_5 14 -#define ERC32_INTERRUPT_WATCHDOG_TIMEOUT 15 - -#ifndef ASM - -/* - * Trap Types for on-chip peripherals - * - * Source: Table 8 - Interrupt Trap Type and Default Priority Assignments - * - * NOTE: The priority level for each source corresponds to the least - * significant nibble of the trap type. - */ - -#define ERC32_TRAP_TYPE( _source ) SPARC_ASYNCHRONOUS_TRAP((_source) + 0x10) - -#define ERC32_TRAP_SOURCE( _trap ) ((_trap) - 0x10) - -#define ERC32_Is_MEC_Trap( _trap ) \ - ( (_trap) >= ERC32_TRAP_TYPE( ERC32_INTERRUPT_MASKED_ERRORS ) && \ - (_trap) <= ERC32_TRAP_TYPE( ERC32_INTERRUPT_WATCHDOG_TIMEOUT ) ) - -/* - * Structure for ERC32 memory mapped registers. - * - * Source: Section 3.25.2 - Register Address Map - * - * NOTE: There is only one of these structures per CPU, its base address - * is 0x01f80000, and the variable MEC is placed there by the - * linkcmds file. - */ - -typedef struct { - volatile unsigned32 Control; /* offset 0x00 */ - volatile unsigned32 Software_Reset; /* offset 0x04 */ - volatile unsigned32 Power_Down; /* offset 0x08 */ - volatile unsigned32 Unimplemented_0; /* offset 0x0c */ - volatile unsigned32 Memory_Configuration; /* offset 0x10 */ - volatile unsigned32 IO_Configuration; /* offset 0x14 */ - volatile unsigned32 Wait_State_Configuration; /* offset 0x18 */ - volatile unsigned32 Unimplemented_1; /* offset 0x1c */ - volatile unsigned32 Memory_Access_0; /* offset 0x20 */ - volatile unsigned32 Memory_Access_1; /* offset 0x24 */ - volatile unsigned32 Unimplemented_2[ 7 ]; /* offset 0x28 */ - volatile unsigned32 Interrupt_Shape; /* offset 0x44 */ - volatile unsigned32 Interrupt_Pending; /* offset 0x48 */ - volatile unsigned32 Interrupt_Mask; /* offset 0x4c */ - volatile unsigned32 Interrupt_Clear; /* offset 0x50 */ - volatile unsigned32 Interrupt_Force; /* offset 0x54 */ - volatile unsigned32 Unimplemented_3[ 2 ]; /* offset 0x58 */ - /* offset 0x60 */ - volatile unsigned32 Watchdog_Program_and_Timeout_Acknowledge; - volatile unsigned32 Watchdog_Trap_Door_Set; /* offset 0x64 */ - volatile unsigned32 Unimplemented_4[ 6 ]; /* offset 0x68 */ - volatile unsigned32 Real_Time_Clock_Counter; /* offset 0x80 */ - volatile unsigned32 Real_Time_Clock_Scalar; /* offset 0x84 */ - volatile unsigned32 General_Purpose_Timer_Counter; /* offset 0x88 */ - volatile unsigned32 General_Purpose_Timer_Scalar; /* offset 0x8c */ - volatile unsigned32 Unimplemented_5[ 2 ]; /* offset 0x90 */ - volatile unsigned32 Timer_Control; /* offset 0x98 */ - volatile unsigned32 Unimplemented_6; /* offset 0x9c */ - volatile unsigned32 System_Fault_Status; /* offset 0xa0 */ - volatile unsigned32 First_Failing_Address; /* offset 0xa4 */ - volatile unsigned32 First_Failing_Data; /* offset 0xa8 */ - volatile unsigned32 First_Failing_Syndrome_and_Check_Bits;/* offset 0xac */ - volatile unsigned32 Error_and_Reset_Status; /* offset 0xb0 */ - volatile unsigned32 Error_Mask; /* offset 0xb4 */ - volatile unsigned32 Unimplemented_7[ 2 ]; /* offset 0xb8 */ - volatile unsigned32 Debug_Control; /* offset 0xc0 */ - volatile unsigned32 Breakpoint; /* offset 0xc4 */ - volatile unsigned32 Watchpoint; /* offset 0xc8 */ - volatile unsigned32 Unimplemented_8; /* offset 0xcc */ - volatile unsigned32 Test_Control; /* offset 0xd0 */ - volatile unsigned32 Test_Data; /* offset 0xd4 */ - volatile unsigned32 Unimplemented_9[ 2 ]; /* offset 0xd8 */ - volatile unsigned32 UART_Channel_A; /* offset 0xe0 */ - volatile unsigned32 UART_Channel_B; /* offset 0xe4 */ - volatile unsigned32 UART_Status; /* offset 0xe8 */ -} ERC32_Register_Map; - -#endif - -/* - * The following constants are intended to be used ONLY in assembly - * language files. - * - * NOTE: The intended style of usage is to load the address of MEC - * into a register and then use these as displacements from - * that register. - */ - -#ifdef ASM - -#define ERC32_MEC_CONTROL_OFFSET 0x00 -#define ERC32_MEC_SOFTWARE_RESET_OFFSET 0x04 -#define ERC32_MEC_POWER_DOWN_OFFSET 0x08 -#define ERC32_MEC_UNIMPLEMENTED_0_OFFSET 0x0C -#define ERC32_MEC_MEMORY_CONFIGURATION_OFFSET 0x10 -#define ERC32_MEC_IO_CONFIGURATION_OFFSET 0x14 -#define ERC32_MEC_WAIT_STATE_CONFIGURATION_OFFSET 0x18 -#define ERC32_MEC_UNIMPLEMENTED_1_OFFSET 0x1C -#define ERC32_MEC_MEMORY_ACCESS_0_OFFSET 0x20 -#define ERC32_MEC_MEMORY_ACCESS_1_OFFSET 0x24 -#define ERC32_MEC_UNIMPLEMENTED_2_OFFSET 0x28 -#define ERC32_MEC_INTERRUPT_SHAPE_OFFSET 0x44 -#define ERC32_MEC_INTERRUPT_PENDING_OFFSET 0x48 -#define ERC32_MEC_INTERRUPT_MASK_OFFSET 0x4C -#define ERC32_MEC_INTERRUPT_CLEAR_OFFSET 0x50 -#define ERC32_MEC_INTERRUPT_FORCE_OFFSET 0x54 -#define ERC32_MEC_UNIMPLEMENTED_3_OFFSET 0x58 -#define ERC32_MEC_WATCHDOG_PROGRAM_AND_TIMEOUT_ACKNOWLEDGE_OFFSET 0x60 -#define ERC32_MEC_WATCHDOG_TRAP_DOOR_SET_OFFSET 0x64 -#define ERC32_MEC_UNIMPLEMENTED_4_OFFSET 0x6C -#define ERC32_MEC_REAL_TIME_CLOCK_COUNTER_OFFSET 0x80 -#define ERC32_MEC_REAL_TIME_CLOCK_SCALAR_OFFSET 0x84 -#define ERC32_MEC_GENERAL_PURPOSE_TIMER_COUNTER_OFFSET 0x88 -#define ERC32_MEC_GENERAL_PURPOSE_TIMER_SCALAR_OFFSET 0x8C -#define ERC32_MEC_UNIMPLEMENTED_5_OFFSET 0x90 -#define ERC32_MEC_TIMER_CONTROL_OFFSET 0x98 -#define ERC32_MEC_UNIMPLEMENTED_6_OFFSET 0x9C -#define ERC32_MEC_SYSTEM_FAULT_STATUS_OFFSET 0xA0 -#define ERC32_MEC_FIRST_FAILING_ADDRESS_OFFSET 0xA4 -#define ERC32_MEC_FIRST_FAILING_DATA_OFFSET 0xA8 -#define ERC32_MEC_FIRST_FAILING_SYNDROME_AND_CHECK_BITS_OFFSET 0xAC -#define ERC32_MEC_ERROR_AND_RESET_STATUS_OFFSET 0xB0 -#define ERC32_MEC_ERROR_MASK_OFFSET 0xB4 -#define ERC32_MEC_UNIMPLEMENTED_7_OFFSET 0xB8 -#define ERC32_MEC_DEBUG_CONTROL_OFFSET 0xC0 -#define ERC32_MEC_BREAKPOINT_OFFSET 0xC4 -#define ERC32_MEC_WATCHPOINT_OFFSET 0xC8 -#define ERC32_MEC_UNIMPLEMENTED_8_OFFSET 0xCC -#define ERC32_MEC_TEST_CONTROL_OFFSET 0xD0 -#define ERC32_MEC_TEST_DATA_OFFSET 0xD4 -#define ERC32_MEC_UNIMPLEMENTED_9_OFFSET 0xD8 -#define ERC32_MEC_UART_CHANNEL_A_OFFSET 0xE0 -#define ERC32_MEC_UART_CHANNEL_B_OFFSET 0xE4 -#define ERC32_MEC_UART_STATUS_OFFSET 0xE8 - -#endif - -/* - * The following defines the bits in the Configuration Register. - */ - -#define ERC32_CONFIGURATION_POWER_DOWN_MASK 0x00000001 -#define ERC32_CONFIGURATION_POWER_DOWN_ALLOWED 0x00000001 -#define ERC32_CONFIGURATION_POWER_DOWN_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_SOFTWARE_RESET_MASK 0x00000002 -#define ERC32_CONFIGURATION_SOFTWARE_RESET_ALLOWED 0x00000002 -#define ERC32_CONFIGURATION_SOFTWARE_RESET_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_BUS_TIMEOUT_MASK 0x00000004 -#define ERC32_CONFIGURATION_BUS_TIMEOUT_ENABLED 0x00000004 -#define ERC32_CONFIGURATION_BUS_TIMEOUT_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_MASK 0x00000008 -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_ENABLED 0x00000008 -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_DISABLED 0x00000000 - - -/* - * The following defines the bits in the Memory Configuration Register. - */ - -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_MASK 0x00001C00 -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_256K ( 0 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_512K ( 1 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_1MB ( 2 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_2MB ( 3 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_4MB ( 4 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_8MB ( 5 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_16MB ( 6 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_32MB ( 7 << 10 ) - -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_MASK 0x001C0000 -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_128K ( 0 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_256K ( 1 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_512K ( 2 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_1M ( 3 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_2M ( 4 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_4M ( 5 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_8M ( 6 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_16M ( 7 << 18 ) - -/* - * The following defines the bits in the Timer Control Register. - */ - -#define ERC32_MEC_TIMER_CONTROL_GCR 0x00000001 /* 1 = reload at 0 */ - /* 0 = stop at 0 */ -#define ERC32_MEC_TIMER_CONTROL_GCL 0x00000002 /* 1 = load and start */ - /* 0 = no function */ -#define ERC32_MEC_TIMER_CONTROL_GSE 0x00000004 /* 1 = enable counting */ - /* 0 = hold scalar and counter */ -#define ERC32_MEC_TIMER_CONTROL_GSL 0x00000008 /* 1 = load scalar and start */ - /* 0 = no function */ - -#define ERC32_MEC_TIMER_CONTROL_RTCCR 0x00000100 /* 1 = reload at 0 */ - /* 0 = stop at 0 */ -#define ERC32_MEC_TIMER_CONTROL_RTCCL 0x00000200 /* 1 = load and start */ - /* 0 = no function */ -#define ERC32_MEC_TIMER_CONTROL_RTCSE 0x00000400 /* 1 = enable counting */ - /* 0 = hold scalar and counter */ -#define ERC32_MEC_TIMER_CONTROL_RTCSL 0x00000800 /* 1 = load scalar and start */ - /* 0 = no function */ - -/* - * The following defines the bits in the UART Control Registers. - * - */ - -#define ERC32_MEC_UART_CONTROL_RTD 0x000000FF /* RX/TX data */ - -/* - * The following defines the bits in the MEC UART Control Registers. - */ - -#define ERC32_MEC_UART_STATUS_DR 0x00000001 /* Data Ready */ -#define ERC32_MEC_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ -#define ERC32_MEC_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ -#define ERC32_MEC_UART_STATUS_FE 0x00000010 /* RX Framing Error */ -#define ERC32_MEC_UART_STATUS_PE 0x00000020 /* RX Parity Error */ -#define ERC32_MEC_UART_STATUS_OE 0x00000040 /* RX Overrun Error */ -#define ERC32_MEC_UART_STATUS_CU 0x00000080 /* Clear Errors */ -#define ERC32_MEC_UART_STATUS_TXE 0x00000006 /* TX Empty */ -#define ERC32_MEC_UART_STATUS_CLRA 0x00000080 /* Clear UART A */ -#define ERC32_MEC_UART_STATUS_CLRB 0x00800000 /* Clear UART B */ -#define ERC32_MEC_UART_STATUS_ERRA 0x00000070 /* Error in UART A */ -#define ERC32_MEC_UART_STATUS_ERRB 0x00700000 /* Error in UART B */ - -#define ERC32_MEC_UART_STATUS_DRA (ERC32_MEC_UART_STATUS_DR << 0) -#define ERC32_MEC_UART_STATUS_TSEA (ERC32_MEC_UART_STATUS_TSE << 0) -#define ERC32_MEC_UART_STATUS_THEA (ERC32_MEC_UART_STATUS_THE << 0) -#define ERC32_MEC_UART_STATUS_FEA (ERC32_MEC_UART_STATUS_FE << 0) -#define ERC32_MEC_UART_STATUS_PEA (ERC32_MEC_UART_STATUS_PE << 0) -#define ERC32_MEC_UART_STATUS_OEA (ERC32_MEC_UART_STATUS_OE << 0) -#define ERC32_MEC_UART_STATUS_CUA (ERC32_MEC_UART_STATUS_CU << 0) -#define ERC32_MEC_UART_STATUS_TXEA (ERC32_MEC_UART_STATUS_TXE << 0) - -#define ERC32_MEC_UART_STATUS_DRB (ERC32_MEC_UART_STATUS_DR << 16) -#define ERC32_MEC_UART_STATUS_TSEB (ERC32_MEC_UART_STATUS_TSE << 16) -#define ERC32_MEC_UART_STATUS_THEB (ERC32_MEC_UART_STATUS_THE << 16) -#define ERC32_MEC_UART_STATUS_FEB (ERC32_MEC_UART_STATUS_FE << 16) -#define ERC32_MEC_UART_STATUS_PEB (ERC32_MEC_UART_STATUS_PE << 16) -#define ERC32_MEC_UART_STATUS_OEB (ERC32_MEC_UART_STATUS_OE << 16) -#define ERC32_MEC_UART_STATUS_CUB (ERC32_MEC_UART_STATUS_CU << 16) -#define ERC32_MEC_UART_STATUS_TXEB (ERC32_MEC_UART_STATUS_TXE << 16) - -#ifndef ASM - -/* - * This is used to manipulate the on-chip registers. - * - * The following symbol must be defined in the linkcmds file and point - * to the correct location. - */ - -extern ERC32_Register_Map ERC32_MEC; - -/* - * Macros to manipulate the Interrupt Clear, Interrupt Force, Interrupt Mask, - * and the Interrupt Pending Registers. - * - * NOTE: For operations which are not atomic, this code disables interrupts - * to guarantee there are no intervening accesses to the same register. - * The operations which read the register, modify the value and then - * store the result back are vulnerable. - */ - -#define ERC32_Clear_interrupt( _source ) \ - do { \ - ERC32_MEC.Interrupt_Clear = (1 << (_source)); \ - } while (0) - -#define ERC32_Force_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Test_Control = ERC32_MEC.Test_Control | 0x80000; \ - ERC32_MEC.Interrupt_Force = (1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Is_interrupt_pending( _source ) \ - (ERC32_MEC.Interrupt_Pending & (1 << (_source))) - -#define ERC32_Is_interrupt_masked( _source ) \ - (ERC32_MEC.Interrupt_Masked & (1 << (_source))) - -#define ERC32_Mask_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask |= (1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Unmask_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask &= ~(1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Disable_interrupt( _source, _previous ) \ - do { \ - unsigned32 _level; \ - unsigned32 _mask = 1 << (_source); \ - \ - sparc_disable_interrupts( _level ); \ - (_previous) = ERC32_MEC.Interrupt_Mask; \ - ERC32_MEC.Interrupt_Mask = _previous | _mask; \ - sparc_enable_interrupts( _level ); \ - (_previous) &= _mask; \ - } while (0) - -#define ERC32_Restore_interrupt( _source, _previous ) \ - do { \ - unsigned32 _level; \ - unsigned32 _mask = 1 << (_source); \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask = \ - (ERC32_MEC.Interrupt_Mask & ~_mask) | (_previous); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -/* - * The following macros attempt to hide the fact that the General Purpose - * Timer and Real Time Clock Timer share the Timer Control Register. Because - * the Timer Control Register is write only, we must mirror it in software - * and insure that writes to one timer do not alter the current settings - * and status of the other timer. - * - * This code promotes the view that the two timers are completely independent. - * By exclusively using the routines below to access the Timer Control - * Register, the application can view the system as having a General Purpose - * Timer Control Register and a Real Time Clock Timer Control Register - * rather than the single shared value. - * - * Each logical timer control register is organized as follows: - * - * D0 - Counter Reload - * 1 = reload counter at zero and restart - * 0 = stop counter at zero - * - * D1 - Counter Load - * 1 = load counter with preset value and restart - * 0 = no function - * - * D2 - Enable - * 1 = enable counting - * 0 = hold scaler and counter - * - * D3 - Scaler Load - * 1 = load scalar with preset value and restart - * 0 = no function - * - * To insure the management of the mirror is atomic, we disable interrupts - * around updates. - */ - -#define ERC32_MEC_TIMER_COUNTER_RELOAD_AT_ZERO 0x00000001 -#define ERC32_MEC_TIMER_COUNTER_STOP_AT_ZERO 0x00000000 - -#define ERC32_MEC_TIMER_COUNTER_LOAD_COUNTER 0x00000002 - -#define ERC32_MEC_TIMER_COUNTER_ENABLE_COUNTING 0x00000004 -#define ERC32_MEC_TIMER_COUNTER_DISABLE_COUNTING 0x00000000 - -#define ERC32_MEC_TIMER_COUNTER_LOAD_SCALER 0x00000008 - -#define ERC32_MEC_TIMER_COUNTER_RELOAD_MASK 0x00000001 -#define ERC32_MEC_TIMER_COUNTER_ENABLE_MASK 0x00000004 - -#define ERC32_MEC_TIMER_COUNTER_DEFINED_MASK 0x0000000F -#define ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK 0x00000005 - -extern unsigned32 _ERC32_MEC_Timer_Control_Mirror; - -/* - * This macros manipulate the General Purpose Timer portion of the - * Timer Control register and promote the view that there are actually - * two independent Timer Control Registers. - */ - -#define ERC32_MEC_Set_General_Purpose_Timer_Control( _value ) \ - do { \ - unsigned32 _level; \ - unsigned32 _control; \ - unsigned32 __value; \ - \ - __value = ((_value) & 0x0f); \ - sparc_disable_interrupts( _level ); \ - _control = _ERC32_MEC_Timer_Control_Mirror; \ - _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK << 8; \ - _ERC32_MEC_Timer_Control_Mirror = _control | _value; \ - _control &= (ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK << 8); \ - _control |= __value; \ - /* printf( "GPT 0x%x 0x%x 0x%x\n", _value, __value, _control ); */ \ - ERC32_MEC.Timer_Control = _control; \ - sparc_enable_interrupts( _level ); \ - } while ( 0 ) - -#define ERC32_MEC_Get_General_Purpose_Timer_Control( _value ) \ - do { \ - (_value) = _ERC32_MEC_Timer_Control_Mirror & 0xf; \ - } while ( 0 ) - -/* - * This macros manipulate the Real Timer Clock Timer portion of the - * Timer Control register and promote the view that there are actually - * two independent Timer Control Registers. - */ - -#define ERC32_MEC_Set_Real_Time_Clock_Timer_Control( _value ) \ - do { \ - unsigned32 _level; \ - unsigned32 _control; \ - unsigned32 __value; \ - \ - __value = ((_value) & 0x0f) << 8; \ - sparc_disable_interrupts( _level ); \ - _control = _ERC32_MEC_Timer_Control_Mirror; \ - _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK; \ - _ERC32_MEC_Timer_Control_Mirror = _control | __value; \ - _control &= ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK; \ - _control |= __value; \ - /* printf( "RTC 0x%x 0x%x 0x%x\n", _value, __value, _control ); */ \ - ERC32_MEC.Timer_Control = _control; \ - sparc_enable_interrupts( _level ); \ - } while ( 0 ) - -#define ERC32_MEC_Get_Real_Time_Clock_Timer_Control( _value ) \ - do { \ - (_value) = (_ERC32_MEC_Timer_Control_Mirror >> 8) & 0xf; \ - } while ( 0 ) - - -#endif /* !ASM */ - -#ifdef __cplusplus -} -#endif - -#endif /* !_INCLUDE_ERC32_h */ -/* end of include file */ - |