diff options
Diffstat (limited to '')
-rw-r--r-- | c/src/lib/libcpu/arm/s3c2400/timer/timer.c | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/c/src/lib/libcpu/arm/s3c2400/timer/timer.c b/c/src/lib/libcpu/arm/s3c2400/timer/timer.c deleted file mode 100644 index 171ce4e5a6..0000000000 --- a/c/src/lib/libcpu/arm/s3c2400/timer/timer.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * S3C2400 Timer driver - * - * This uses timer 1 for timing measurments. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * - * http://www.rtems.com/license/LICENSE. - * - * Notes: - * This file manages the benchmark timer used by the RTEMS Timing Test - * Suite. Each measured time period is demarcated by calls to - * benchmark_timer_initialize() and benchmark_timer_read(). benchmark_timer_read() usually returns - * the number of microseconds since benchmark_timer_initialize() exitted. - * - * It is important that the timer start/stop overhead be determined - * when porting or modifying this code. - * - * $Id$ -*/ - -#include <rtems.h> -#include <bsp.h> -#include <s3c2400.h> - -uint32_t g_start; -uint32_t g_freq; - -bool benchmark_timer_find_average_overhead; - - -/* - * Set up Timer 1 - */ -void benchmark_timer_initialize( void ) -{ - uint32_t cr; - - /* stop TIMER1*/ - cr=rTCON & 0xFFFFF0FF; - rTCON=(cr | (0x0 << 8)); - - /* set MUX for Timer1 to 1/2 */ - cr=rTCFG1 & 0xFFFFFF0F; - rTCFG1=(cr | (0<<4)); - - /* input freq=PLCK/2 Mhz*/ - g_freq = get_PCLK() / 2000; - rTCNTB1 = 0xFFFF; - - /* start TIMER1 with manual reload */ - cr=rTCON & 0xFFFFF0FF; - rTCON=(cr | (0x1 << 9)); - rTCON=(cr | (0x1 << 8)); - - g_start = rTCNTO1; -} - -/* - * The following controls the behavior of benchmark_timer_read(). - * - * AVG_OVEREHAD is the overhead for starting and stopping the timer. It - * is usually deducted from the number returned. - * - * LEAST_VALID is the lowest number this routine should trust. Numbers - * below this are "noise" and zero is returned. - */ - -#define AVG_OVERHEAD 0 /* It typically takes X.X microseconds */ - /* (Y countdowns) to start/stop the timer. */ - /* This value is in microseconds. */ -#define LEAST_VALID 1 /* Don't trust a clicks value lower than this */ - -int benchmark_timer_read( void ) -{ - uint32_t t; - unsigned long long total; - - t = rTCNTO1; - /* - * Total is calculated by taking into account the number of timer overflow - * interrupts since the timer was initialized and clicks since the last - * interrupts. - */ - - total = (g_start - t); - - /* convert to microseconds */ - total = (total*1000) / g_freq; - - if ( benchmark_timer_find_average_overhead == 1 ) { - return (int) total; - } else if ( total < LEAST_VALID ) { - return 0; - } - - /* - * Somehow convert total into microseconds - */ - return (total - AVG_OVERHEAD); -} - -void benchmark_timer_disable_subtracting_average_overhead(bool find_flag) -{ - benchmark_timer_find_average_overhead = find_flag; -} - |