diff options
Diffstat (limited to '')
-rw-r--r-- | c/src/lib/libcpu/a29k/timer/Makefile.am | 36 | ||||
-rw-r--r-- | c/src/lib/libcpu/a29k/timer/gettime.S | 13 | ||||
-rw-r--r-- | c/src/lib/libcpu/a29k/timer/timer.c | 119 | ||||
-rw-r--r-- | c/src/lib/libcpu/a29k/timer/timerisr.c | 41 |
4 files changed, 209 insertions, 0 deletions
diff --git a/c/src/lib/libcpu/a29k/timer/Makefile.am b/c/src/lib/libcpu/a29k/timer/Makefile.am new file mode 100644 index 0000000000..457e7fa2a6 --- /dev/null +++ b/c/src/lib/libcpu/a29k/timer/Makefile.am @@ -0,0 +1,36 @@ +## +## Makefile,v 1.2 1995/05/31 16:56:37 joel Exp +## +## @(#)Makefile 03/26/96 1.2 + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM=$(ARCH)/timer.rel + +# NOTE: timerisr is normally an assembly file!!! + +C_FILES = timer.c timerisr.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +S_FILES = gettime.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(SRCS) $(OBJS) + $(make-rel) + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = Makefile gettime.S timer.c timerisr.c + +include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libcpu/a29k/timer/gettime.S b/c/src/lib/libcpu/a29k/timer/gettime.S new file mode 100644 index 0000000000..cd429a7725 --- /dev/null +++ b/c/src/lib/libcpu/a29k/timer/gettime.S @@ -0,0 +1,13 @@ +/* @(#)gettime.S 03/26/96 1.1 */ + +#include "iregdef.h" +#include "idtcpu.h" +#include "idtmon.h" + +FRAME(mips_read_timer,sp,0,ra) + .set noreorder + mfc0 v0,C0_COUNT + nop + j ra + .set reorder +ENDFRAME(mips_read_timer) diff --git a/c/src/lib/libcpu/a29k/timer/timer.c b/c/src/lib/libcpu/a29k/timer/timer.c new file mode 100644 index 0000000000..c5911d1fae --- /dev/null +++ b/c/src/lib/libcpu/a29k/timer/timer.c @@ -0,0 +1,119 @@ +/* timer.c + * + * This file manages the benchmark timer used by the RTEMS Timing Test + * Suite. Each measured time period is demarcated by calls to + * Timer_initialize() and Read_timer(). Read_timer() usually returns + * the number of microseconds since Timer_initialize() exitted. + * + * NOTE: It is important that the timer start/stop overhead be + * determined when porting or modifying this code. + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * timer.c,v 1.2 1995/05/31 16:56:39 joel Exp + */ + +#ifndef lint +static char _sccsid[] = "@(#)timer.c 05/07/96 1.4\n"; +#endif + +#include <rtems.h> +#include <bsp.h> + +#define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) +#define TIMER_MAX_VALUE 0xffffffff + +extern unsigned32 mips_read_timer( void ); + +static rtems_boolean Timer_driver_Find_average_overhead; +static unsigned32 Timer_initial_value = 0; + +void Timer_initialize( void ) +{ +/* + Timer_initial_value = mips_read_timer(); + */ + /* + * Somehow start the timer + */ + + /* Timer on 4650 is always running */ +} + +/* + * The following controls the behavior of Read_timer(). + * + * AVG_OVEREHAD is the overhead for starting and stopping the timer. It + * is usually deducted from the number returned. + * + * LEAST_VALID is the lowest number this routine should trust. Numbers + * below this are "noise" and zero is returned. + */ + +#define AVG_OVERHEAD 8 /* It typically takes X.X microseconds */ + /* (Y countdowns) to start/stop the timer. */ + /* This value is in cycles. */ +#define LEAST_VALID 1 /* Don't trust a clicks value lower than this */ + +int Read_timer( void ) +{ + unsigned64 clicks; + unsigned32 total; + + /* + * Read the timer and see how many clicks it has been since we started. + */ + + clicks = mips_read_timer(); /* XXX: read some HW here */ + if (clicks < Timer_initial_value) + { + clicks += TIMER_MAX_VALUE; + } + clicks -= Timer_initial_value; + + /* + * Total is calculated by taking into account the number of timer overflow + * interrupts since the timer was initialized and clicks since the last + * interrupts. + */ +#if 0 /* leave total in number of cycles */ + total = clicks / CLOCKS_PER_MICROSECOND; +#else + total = clicks; +#endif + + if ( Timer_driver_Find_average_overhead == 1 ) + return total; /* in # cycles units */ + else { + if ( total < LEAST_VALID ) + return 0; /* below timer resolution */ + /* + * leave total in cycles + */ + return (total - AVG_OVERHEAD); + } +} + +/* + * Empty function call used in loops to measure basic cost of looping + * in Timing Test Suite. + */ + +rtems_status_code Empty_function( void ) +{ + return RTEMS_SUCCESSFUL; +} + +void Set_find_average_overhead( + rtems_boolean find_flag +) +{ + Timer_driver_Find_average_overhead = find_flag; +} + diff --git a/c/src/lib/libcpu/a29k/timer/timerisr.c b/c/src/lib/libcpu/a29k/timer/timerisr.c new file mode 100644 index 0000000000..82c3c80d9f --- /dev/null +++ b/c/src/lib/libcpu/a29k/timer/timerisr.c @@ -0,0 +1,41 @@ +/* timerisr.s + * + * If required this ISR is used to bump a count of interval "overflow" + * interrupts which have occurred since the timer was started. The + * number of overflows is taken into account in the Read_timer() + * routine if necessary. + * + * To reduce overhead this is best to be the "rawest" hardware interupt + * handler you can write. This should be the only interrupt which can + * occur during the measured time period. + * + * NOTE: This file is USUALLY in assembly and is LEAN AND MEAN. + * Any code in this isr is pure overhead which can perturb + * the accuracy of the Timing Test Suite. + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * timerisr.c,v 1.2 1995/05/31 16:56:40 joel Exp + */ + +#ifndef lint +static char _sccsid[] = "@(#)timerisr.c 03/15/96 1.1\n"; +#endif + +#include <rtems.h> + +extern rtems_unsigned32 _Timer_interrupts; + +void timerisr( void ) +{ + /* + * _Timer_interrupts += TIMER_BETWEEN_OVERFLOWS (usually in microseconds) + * return from interrupt + */ +} |