diff options
Diffstat (limited to '')
| -rw-r--r-- | c/src/lib/libchip/serial/README.z85c30 | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/c/src/lib/libchip/serial/README.z85c30 b/c/src/lib/libchip/serial/README.z85c30 deleted file mode 100644 index 4442b5ef40..0000000000 --- a/c/src/lib/libchip/serial/README.z85c30 +++ /dev/null @@ -1,78 +0,0 @@ -# -# $Id$ -# - -Configuration Table Use -======================= - -sDeviceName - - The name of this device. - -deviceType - - This field must be SERIAL_Z85C30. - -pDeviceFns - - The device interface control table. This may be: - + z85c30_fns for interrupt driven IO - + z85c30_fns_polled for polled IO - -deviceProbe - - This is the address of the routine which probes to see if the device - is present. - -pDeviceFlow - - This field is set to one of the following values: - + NULL for no hardware flow control - + z85c30_flow_RTSCTS for RTS/CTS based flow control - + z85c30_flow_DTRCTS for DTR/CTS based flow control - -ulMargin - - This is currently unused. - -ulHysteresis - - This is currently unused. - -pDeviceParams - - This is set to the default settings. - -ulCtrlPort1 - - This field is the address of the control register for this port. - -ulCtrlPort2 - - This field is the address of the control register for chip. - -ulDataPort - - This field is the address of the data register for this port. - -getRegister -setRegister - - These follow standard conventions. - -getData -setData - - These follow standard conventions. - -ulClock - - This is the clock speed of the baud rate clock. - NULL, then the CSR/ACR/X bit mappings shown in the 68681 and 88681 - manuals are used. Otherwise, the board specific baud rate mapping - is used. - -ulIntVector - - This is the interrupt vector number associated with this chip. - |