10 files changed, 0 insertions, 652 deletions
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/Makefile.in
deleted file mode 100644
index 0ef7c0315e..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/Makefile.in
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = powerpc/mvme2307
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-SRCS = README
-
-all: $(SRCS)
-
-# We only build the Network library if HAS_NETWORKING was defined
-NETWORK_yes_V = network
-NETWORK = $(NETWORK_$(HAS_NETWORKING)_V)
-
-# wrapup is the one that actually builds and installs the library
-#  from the individual .rel files built in other directories
-SUBDIRS = include clock console startup boot nvram timer pci $(NETWORK) \
-    wrapup
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/boot/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/boot/Makefile.in
deleted file mode 100644
index 9da2f8bca0..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/boot/Makefile.in
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/boot
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGMS = ${ARCH}/start.o
-
-# C source names, if any, go here -- minus the .c
-C_PIECES =
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES = start
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
-	$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/console/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/console/Makefile.in
deleted file mode 100644
index 5bc442c3ca..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/console/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/console
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/console.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = console printk
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/include/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/include/Makefile.in
deleted file mode 100644
index 7e806bc231..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/include/Makefile.in
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/include
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h
-
-#
-#  Equate files are for including from assembly preprocessed by
-#  gm4 or gasp.  No examples are provided except for those for
-#  other CPUs.  The best way to generate them would be to
-#  provide a program which generates the constants used based
-#  on the C equivalents.
-#
-#  If you add equate files, don't forget to uncomment the install line
-#  below.
-#
-
-EQ_FILES =
-
-SRCS = $(H_FILES) $(EQ_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: $(SRCS)
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/network/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/network/Makefile.in
deleted file mode 100644
index a33f6059ba..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/network/Makefile.in
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/network
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/network.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = network
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS -DDIAGNOSTIC \
-    -DBOOTP_COMPAT
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/nvram/Makefile.in
deleted file mode 100644
index d96a043571..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/nvram/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/nvram
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/nvram.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = nvram
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/pci/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/pci/Makefile.in
deleted file mode 100644
index 2f75ec04e3..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/pci/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/pci
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/pci.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = interrupts pci
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/startup/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/startup/Makefile.in
deleted file mode 100644
index f867d2fcfa..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/startup/Makefile.in
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/startup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../../shared
-
-PGM = ${ARCH}/startup.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = bspclean bsplibc bsppost bspstart main sbrk setvec
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_RELEASE)/lib
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-	$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/timer/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/timer/Makefile.in
deleted file mode 100644
index ad3fbf7357..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/timer/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/timer
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/timer.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = timer
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/wrapup/Makefile.in
deleted file mode 100644
index bd170c3339..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/wrapup/Makefile.in
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/wrapup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-# We only build the Network library if HAS_NETWORKING was defined
-NETWORK_yes_V = network
-NETWORK = $(NETWORK_$(HAS_NETWORKING)_V)
-
-BSP_PIECES = startup clock console nvram timer pci $(NETWORK)
-# pieces to pick up out of libcpu/ppc
-CPU_PIECES =
-GENERIC_PIECES =
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/lib.cfg
-
-INSTALL = @INSTALL@
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-# bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
-    $(foreach piece, $(CPU_PIECES), \
-    ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \
-    piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel)
-LIB = $(ARCH)/libbsp.a
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(LIB): ${OBJS}
-	$(make-library)
-
-all: ${ARCH} $(SRCS) $(LIB)
-	$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
-
-$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs
-	$(INSTALL_DATA) $< $@
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status