diff options
Diffstat (limited to '')
186 files changed, 8374 insertions, 1 deletions
diff --git a/c/src/lib/libbsp/Makefile.in b/c/src/lib/libbsp/Makefile.in new file mode 100644 index 0000000000..11cd9d8605 --- /dev/null +++ b/c/src/lib/libbsp/Makefile.in @@ -0,0 +1,20 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# mptests are the multiprocessing test suite +# We only build them if HAS_MP was defined + +MP_DRIVERS_yes_V = shmdr +MP_DRIVERS = $(MP_DRIVERS_$(HAS_MP)_V) + +# Descend into the $(RTEMS_CPU) directory if it exists +SUB_DIRS=$(MP_DRIVERS) $(wildcard $(RTEMS_CPU)) diff --git a/c/src/lib/libbsp/a29k/Makefile.in b/c/src/lib/libbsp/a29k/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/a29k/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/a29k/portsw/Makefile.in b/c/src/lib/libbsp/a29k/portsw/Makefile.in new file mode 100644 index 0000000000..5f233da39d --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup console wrapup diff --git a/c/src/lib/libbsp/a29k/portsw/console/Makefile.in b/c/src/lib/libbsp/a29k/portsw/console/Makefile.in new file mode 100644 index 0000000000..4ba37cd168 --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/console/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console serial +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES=$(srcdir)/concntl.h + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile diff --git a/c/src/lib/libbsp/a29k/portsw/include/Makefile.in b/c/src/lib/libbsp/a29k/portsw/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in b/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in new file mode 100644 index 0000000000..c91ccb5214 --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/a29k/portsw/start/Makefile.in b/c/src/lib/libbsp/a29k/portsw/start/Makefile.in new file mode 100644 index 0000000000..12f1cbfc6d --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/start/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=crt0 register +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +PGM=${ARCH}/crt0.o ${ARCH}/register.o + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in b/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in new file mode 100644 index 0000000000..f79cdd8ff7 --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart main sbrk setvec iface +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=ramlink romlink $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) ramlink romlink ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in b/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in new file mode 100644 index 0000000000..d78af51ae7 --- /dev/null +++ b/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in @@ -0,0 +1,50 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup console iic ethernet flash nvram +CPU_PIECES=clock timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/hppa1.1/Makefile.in b/c/src/lib/libbsp/hppa1.1/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in new file mode 100644 index 0000000000..000c6435cb --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in @@ -0,0 +1,49 @@ +# +# Build the pixelflow bsp by cd'ing into another floss tree and +# building it there. +# +# NOTE: we also jump sideways in rtems tree and install test/support/include +# so that floss tests can use the rtems test structures +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +SRCS=$(srcdir)/floss-bsp.h + +# HACK alert +# on a 'make -k' we don't want to bomb out of build +EXIT_CMD=exit 1 +ifeq (k, $(findstring k, $(MAKEFLAGS))) +EXIT_CMD=true +endif + + +all install:: + @$(ECHO); $(ECHO) + @if [ ! -d $(FLOSS_ROOT) ]; \ + then \ + $(ECHO) "*** ERROR FLOSS_ROOT ($(FLOSS_ROOT)) points to nonexistent directory"; \ + $(ECHO); $(ECHO); \ + $(EXIT_CMD); \ + fi + @if [ -f $(FLOSS_ROOT)/PURE ]; \ + then \ + $(ECHO) "*** Assuming $(FLOSS_HOME) up to date since ./PURE exists"; \ + else \ + cmd="cd $(RTEMS_ROOT)/c/src/tests/support/include; $(MAKE) install"; \ + $(ECHO) $$cmd; \ + eval $$cmd || $(EXIT_CMD); \ + cmd="cd $(FLOSS_ROOT); $(MAKE) $@"; \ + $(ECHO) $$cmd; \ + eval $$cmd || $(EXIT_CMD); \ + fi + @$(ECHO); $(ECHO) + $(INSTALL) -m 444 $(srcdir)/floss-bsp.h $(PROJECT_RELEASE)/include/bsp.h diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in new file mode 100644 index 0000000000..8894da86a3 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in @@ -0,0 +1,16 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +# NOTE: we pick up HPPA clock and timer from libcpu/hppa +SUB_DIRS=tools include startup tty shmsupp wrapup diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs b/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs new file mode 100644 index 0000000000..827767f3d6 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs @@ -0,0 +1,34 @@ + +predefines: +-D__embedded__ -Asystem(embedded) + +startfile: replace +mrtems: +pg: start.o%s +{!pg: +g: start.o%s +{!g: +p: start.o%s +!p: start.o%s +}} +{!mrtems: +pg: pgcrt0%O +{!pg: +g: gcrt0%O +{!g: +p: pcrt0%O +!p: crt0%O +}}} + + +link: replace +mrtems: -dc -dp -N -e start + +lib: replace +mrtems: -( -lc -lrtemsall -lgcc -) + + +libgcc: replace + + + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in new file mode 100644 index 0000000000..6362ab657e --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in @@ -0,0 +1,40 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_PIECES = bsp coverhd +H_FILES=$(H_PIECES:%=$(srcdir)/%.h) + +RTEMS_H_PIECES = ttydrv +RTEMS_H_FILES=$(RTEMS_H_PIECES:%=$(srcdir)/%.h) + + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# +# If you add equate files, don't forget to uncomment the install line +# below. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(RTEMS_H_FILES) ${PROJECT_RELEASE}/include/rtems diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in new file mode 100644 index 0000000000..f0836ef414 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg intr lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/start.s b/c/src/lib/libbsp/hppa1.1/simhppa/start/start.s new file mode 100644 index 0000000000..92fda897d9 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/start/start.s @@ -0,0 +1,169 @@ +/* + * crt0.S -- startup file for hppa on RTEMS + * + * $Id$ + */ + + .COPYRIGHT "crt0.S for hppa" + + .DATA + +_progname .STRINGZ "simhppa" +_crt0_argv .WORD _progname, 0 + +/* + * Set up the standard spaces (sections) These definitions come + * from /lib/pcc_prefix.s. + */ + .TEXT + +/* + * stuff we need that is defined elsewhere. + */ + .IMPORT main, CODE + .IMPORT _bss_start, DATA + .IMPORT _bss_end, DATA + .IMPORT environ, DATA + +/* + * start -- set things up so the application will run. + * + */ + .PROC + .CALLINFO SAVE_SP, FRAME=48 + .EXPORT $START$,ENTRY + .EXPORT start,ENTRY +$START$ +start: + +/* + * Get a stack + */ + + ldil L%crt_stack+48,%r30 + ldo R%crt_stack+48(%r30),%r30 + +/* + * we need to set %r27 (global data pointer) here + */ + + ldil L%$global$,%r27 + ldo R%$global$(%r27),%r27 + +/* + * zerobss -- zero out the bss section + * XXX We don't do this since simulator and boot rom will do this for us. + */ +#if 0 + ; load the start of bss + ldil L%_bss_start,%r4 + ldo R%_bss_start(%r4),%r4 + + ; load the end of bss + ldil L%_bss_end,%r5 + ldo R%_bss_end(%r5),%r5 + + +bssloop + addi -1,%r5,%r5 ; decrement _bss_end + stb %r0,0(0,%r5) ; we do this by bytes for now even + ; though it is slower, it is safer + combf,= %r4,%r5, bssloop + nop +#endif + + ldi 1,%ret0 + +/* + * Call the "main" routine from the application to get it going. + * We call it as main(1, argv, 0) + */ + + copy %r0, %r24 + + ldil L%_crt0_argv,%r25 + ldo R%_crt0_argv(%r25),%r25 + + bl main,%r2 + ldo 1(%r0), %r26 + + .PROCEND +/* + * _exit -- Exit from the application. Normally we cause a user trap + * to return to the ROM monitor for another run, but with + * this monitor we can not. Still, "C" wants this symbol, it + * should be here. Jumping to 0xF0000004 jumps back into the + * firmware, while writing a 5 to 0xFFFE0030 causes a reset. + */ +_exit_fallthru + .PROC + .CALLINFO + .ENTRY + + ;; This just causes a breakpoint exception + break 0x0,0x0 + bv,n (%rp) + nop + .EXIT + .PROCEND + +/* + * _sr4export -- support for called functions. (mostly for GDB) + */ + .EXPORT _sr4export, ENTRY +_sr4export: + .PROC + .CALLINFO + .ENTRY + + ble 0(%sr4,%r22) + copy %r31,%rp + ldw -18(%sr0,%sp),%rp + ldsid (%sr0,%rp),%r1 + mtsp %r1,%sr0 + be,n 0(%sr0,%rp) + nop + .EXIT + .PROCEND + + + .subspa $UNWIND_START$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=56 + .export $UNWIND_START +$UNWIND_START + .subspa $UNWIND$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=64 + .subspa $UNWIND_END$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=72 + .export $UNWIND_END +$UNWIND_END + .subspa $RECOVER_START$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=73 + .export $RECOVER_START +$RECOVER_START + .subspa $RECOVER$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=80 + .subspa $RECOVER_END$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=88 + .export $RECOVER_END +$RECOVER_END + +/* + * Here we set up the standard date sub spaces. + * + * Set up some room for a stack. We just grab a chunk of memory. + * We also setup some space for the global variable space, which + * must be done using the reserved name "$global$" so "C" code + * can find it. The stack grows towards the higher addresses. + */ + + .subspa $DATA$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=16 + .subspa $SHORTDATA$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=24 + .subspa $GLOBAL$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=40 + .export $global$ +$global$ + .subspa $SHORTBSS$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=80,ZERO + .subspa $BSS$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82,ZERO + + .subspa $STACK$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=88,ZERO + + .export crt_stack +crt_stack + .comm 0x1000 + + .end + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in new file mode 100644 index 0000000000..9474f53521 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in @@ -0,0 +1,61 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +CC_PIECES=rtems-ctor +CC_FILES=$(CC_PIECES:%=%.cc) +CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +# We install the RTEMS constructor as a separate .o +# so it can be easily place correctly by the compiler config file. +INSTALLED_O_FILES=$(ARCH)/rtems-ctor.o + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) + $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c b/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c index ec49abe2bf..78b028dde3 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c +++ b/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c @@ -348,7 +348,7 @@ bsp_start(void) Cpu_table.itimer_clicks_per_microsecond = 1; -#ifdef 0 +#if 0 /* * Commented by DIVISION INC. External interrupt * processing is now divorced from RTEMS for HPPA. diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in new file mode 100644 index 0000000000..57315a8cda --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in @@ -0,0 +1,51 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# we use host compiler here for genoffsets. Hopefully it has same alignment!! +USE_HOST_COMPILER=yes + +# C source names, if any, go here -- minus the .c +C_PIECES=print_dump +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +PGMS=${ARCH}/print_dump + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(PGMS) + $(INSTALL) -m 555 ${PGMS} ${PROJECT_RELEASE}/bin + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in new file mode 100644 index 0000000000..ddaf3924e5 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/tty.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=tty +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in new file mode 100644 index 0000000000..ffcb245350 --- /dev/null +++ b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup tty shmsupp +# pieces to pick up out of libcpu/hppa +CPU_PIECES=clock milli timer +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/i386/Makefile.in b/c/src/lib/libbsp/i386/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/i386/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/i386/force386/Makefile.in b/c/src/lib/libbsp/i386/force386/Makefile.in new file mode 100644 index 0000000000..1280bbaad6 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console shmsupp timer wrapup diff --git a/c/src/lib/libbsp/i386/force386/clock/Makefile.in b/c/src/lib/libbsp/i386/force386/clock/Makefile.in new file mode 100644 index 0000000000..e2def59237 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/force386/console/Makefile.in b/c/src/lib/libbsp/i386/force386/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/force386/include/Makefile.in b/c/src/lib/libbsp/i386/force386/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in new file mode 100644 index 0000000000..113ab8109a --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/i386/force386/startup/Makefile.in b/c/src/lib/libbsp/i386/force386/startup/Makefile.in new file mode 100644 index 0000000000..ced465eb90 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/startup/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=ldsegs +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/i386/force386/timer/Makefile.in b/c/src/lib/libbsp/i386/force386/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in new file mode 100644 index 0000000000..0e6fe816b0 --- /dev/null +++ b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console shmsupp timer +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/i386/go32/Makefile.in b/c/src/lib/libbsp/i386/go32/Makefile.in new file mode 100644 index 0000000000..1590a95a1e --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console timer wrapup diff --git a/c/src/lib/libbsp/i386/go32/clock/Makefile.in b/c/src/lib/libbsp/i386/go32/clock/Makefile.in new file mode 100644 index 0000000000..6444b837e1 --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit rtc +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/go32/console/Makefile.in b/c/src/lib/libbsp/i386/go32/console/Makefile.in new file mode 100644 index 0000000000..808b2cd200 --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console inch outch +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/go32/include/Makefile.in b/c/src/lib/libbsp/i386/go32/include/Makefile.in new file mode 100644 index 0000000000..20c100b31f --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/include/Makefile.in @@ -0,0 +1,34 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include + +install: all diff --git a/c/src/lib/libbsp/i386/go32/startup/Makefile.in b/c/src/lib/libbsp/i386/go32/startup/Makefile.in new file mode 100644 index 0000000000..cd011fd39c --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/i386/go32/timer/Makefile.in b/c/src/lib/libbsp/i386/go32/timer/Makefile.in new file mode 100644 index 0000000000..5327de40f1 --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in new file mode 100644 index 0000000000..52d7e1abea --- /dev/null +++ b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in @@ -0,0 +1,50 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + +install: all + diff --git a/c/src/lib/libbsp/i386/i386ex/Makefile.in b/c/src/lib/libbsp/i386/i386ex/Makefile.in new file mode 100644 index 0000000000..372f1fd5be --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/Makefile.in @@ -0,0 +1,18 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +#was: +#SUB_DIRS=include startup clock console shmsupp timer wrapup +#is +SUB_DIRS=include startup clock console timer wrapup diff --git a/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in new file mode 100644 index 0000000000..3dd7213304 --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/i386ex/console/Makefile.in b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in new file mode 100644 index 0000000000..e7ec245705 --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in @@ -0,0 +1,57 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/i386ex/include/Makefile.in b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in new file mode 100644 index 0000000000..20c100b31f --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in @@ -0,0 +1,34 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include + +install: all diff --git a/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in new file mode 100644 index 0000000000..14d5164dc5 --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in @@ -0,0 +1,64 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +# C_PIECES=bspstart sbrk setvec except i386-stub +C_PIECES=bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + + +# Assembly source names, if any, go here -- minus the .s +# removed initcsu piece, ldsegs piece and flush +S_PIECES= gdt idt interrupts interns reset_jmp + +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +#DEFINES += -DPRINTON +DEFINES += -I$(srcdir) +CPPFLAGS += +CFLAGS += -g + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in new file mode 100644 index 0000000000..5327de40f1 --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in new file mode 100644 index 0000000000..52d7e1abea --- /dev/null +++ b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in @@ -0,0 +1,50 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + +install: all + diff --git a/c/src/lib/libbsp/i960/Makefile.in b/c/src/lib/libbsp/i960/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/i960/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/i960/cvme961/Makefile.in b/c/src/lib/libbsp/i960/cvme961/Makefile.in new file mode 100644 index 0000000000..1280bbaad6 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console shmsupp timer wrapup diff --git a/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in b/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i960/cvme961/console/Makefile.in b/c/src/lib/libbsp/i960/cvme961/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i960/cvme961/include/Makefile.in b/c/src/lib/libbsp/i960/cvme961/include/Makefile.in new file mode 100644 index 0000000000..c9b50f69c3 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/include/Makefile.in @@ -0,0 +1,37 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# +# If you add equate files, don't forget to uncomment the install line +# below. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include/cpu + +install: all diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in b/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in new file mode 100644 index 0000000000..113ab8109a --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/i960/cvme961/start/Makefile.in b/c/src/lib/libbsp/i960/cvme961/start/Makefile.in new file mode 100644 index 0000000000..ca57ecd097 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/start/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=start +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +PGM=${ARCH}/start.o + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in b/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in new file mode 100644 index 0000000000..208b5c6b01 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in @@ -0,0 +1,55 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in b/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in b/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in new file mode 100644 index 0000000000..1f8b6feae9 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in @@ -0,0 +1,50 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console shmsupp timer +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + +install: all + diff --git a/c/src/lib/libbsp/m68k/Makefile.in b/c/src/lib/libbsp/m68k/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/m68k/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/m68k/dmv152/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/Makefile.in new file mode 100644 index 0000000000..85b2602471 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console spurious timer wrapup diff --git a/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in new file mode 100644 index 0000000000..3c7819fce4 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/spurious.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=spinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in new file mode 100644 index 0000000000..ee60cf2aed --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in @@ -0,0 +1,52 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart sbrk setvec vmeintr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in new file mode 100644 index 0000000000..a4444d9cb1 --- /dev/null +++ b/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console spurious timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/efi332/Makefile.in b/c/src/lib/libbsp/m68k/efi332/Makefile.in new file mode 100644 index 0000000000..4abe5b4ac5 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include start332 startup clock console spurious timer wrapup diff --git a/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in b/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi332/console/Makefile.in b/c/src/lib/libbsp/m68k/efi332/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi332/include/Makefile.in b/c/src/lib/libbsp/m68k/efi332/include/Makefile.in new file mode 100644 index 0000000000..1e9e4d7edf --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/efi332.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in b/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in new file mode 100644 index 0000000000..3c7819fce4 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/spurious.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=spinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi332/start/Makefile.in b/c/src/lib/libbsp/m68k/efi332/start/Makefile.in new file mode 100644 index 0000000000..e2dd13f0c8 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/start/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/start332.o + +# C source names, if any, go here -- minus the .c +C_PIECES=start332 +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in b/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in new file mode 100644 index 0000000000..e2dd13f0c8 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/start332.o + +# C source names, if any, go here -- minus the .c +C_PIECES=start332 +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in b/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in new file mode 100644 index 0000000000..d45a01966f --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart bspclean sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in b/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in new file mode 100644 index 0000000000..79c8438431 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in new file mode 100644 index 0000000000..a4444d9cb1 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console spurious timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/efi68k/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/Makefile.in new file mode 100644 index 0000000000..b3ba290d5e --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include start68k startup clock console spurious timer wrapup diff --git a/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in new file mode 100644 index 0000000000..f4db4743ed --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in @@ -0,0 +1,33 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/efi68k.h $(srcdir)/16550.h \ + $(srcdir)/DP8570A.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in new file mode 100644 index 0000000000..3c7819fce4 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/spurious.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=spinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in new file mode 100644 index 0000000000..1351c0e4e5 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/start68k.o + +# C source names, if any, go here -- minus the .c +C_PIECES=start68k +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in new file mode 100644 index 0000000000..1351c0e4e5 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/start68k.o + +# C source names, if any, go here -- minus the .c +C_PIECES=start68k +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in new file mode 100644 index 0000000000..3c3e0eaccc --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart bspclean efi68k_tcp efi68k_wd sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in new file mode 100644 index 0000000000..79c8438431 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in new file mode 100644 index 0000000000..a4444d9cb1 --- /dev/null +++ b/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console spurious timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/gen68302/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/Makefile.in new file mode 100644 index 0000000000..bd7ff1f784 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include start302 startup clock console timer wrapup diff --git a/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in new file mode 100644 index 0000000000..114dd48226 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in @@ -0,0 +1,56 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/start302.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=start302 +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) diff --git a/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in new file mode 100644 index 0000000000..114dd48226 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in @@ -0,0 +1,56 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/start302.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=start302 +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) diff --git a/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in new file mode 100644 index 0000000000..d45a01966f --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart bspclean sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in new file mode 100644 index 0000000000..bd06f5f90f --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/gen68360/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/Makefile.in new file mode 100644 index 0000000000..9581a49c3b --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include start360 startup clock console timer wrapup diff --git a/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in new file mode 100644 index 0000000000..8e325402ca --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in new file mode 100644 index 0000000000..9b6dd903ea --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in @@ -0,0 +1,56 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/start360.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=start360 +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) diff --git a/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in new file mode 100644 index 0000000000..9b6dd903ea --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in @@ -0,0 +1,56 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/start360.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=start360 +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) diff --git a/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in new file mode 100644 index 0000000000..a26be2b371 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart bspclean init68360 sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds $(srcdir)/linkcmds.prom ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in new file mode 100644 index 0000000000..79c8438431 --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in new file mode 100644 index 0000000000..bd06f5f90f --- /dev/null +++ b/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/idp/Makefile.in b/c/src/lib/libbsp/m68k/idp/Makefile.in new file mode 100644 index 0000000000..1590a95a1e --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console timer wrapup diff --git a/c/src/lib/libbsp/m68k/idp/clock/Makefile.in b/c/src/lib/libbsp/m68k/idp/clock/Makefile.in new file mode 100644 index 0000000000..95a41d281e --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/idp/console/Makefile.in b/c/src/lib/libbsp/m68k/idp/console/Makefile.in new file mode 100644 index 0000000000..1332213895 --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console leds mc68ec duart +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/idp/include/Makefile.in b/c/src/lib/libbsp/m68k/idp/include/Makefile.in new file mode 100644 index 0000000000..d4574056f5 --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/include/Makefile.in @@ -0,0 +1,33 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/leds.h \ + $(srcdir)/mc68230.h $(srcdir)/mc68681.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/idp/startup/Makefile.in b/c/src/lib/libbsp/m68k/idp/startup/Makefile.in new file mode 100644 index 0000000000..3d5e713735 --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/idp/timer/Makefile.in b/c/src/lib/libbsp/m68k/idp/timer/Makefile.in new file mode 100644 index 0000000000..468ed7460d --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in new file mode 100644 index 0000000000..8bbdfdc470 --- /dev/null +++ b/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/mvme136/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/Makefile.in new file mode 100644 index 0000000000..1280bbaad6 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console shmsupp timer wrapup diff --git a/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in new file mode 100644 index 0000000000..e2def59237 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in new file mode 100644 index 0000000000..113ab8109a --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in new file mode 100644 index 0000000000..a817df7d46 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in new file mode 100644 index 0000000000..0e6fe816b0 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console shmsupp timer +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/mvme147/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/Makefile.in new file mode 100644 index 0000000000..1590a95a1e --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/Makefile.in @@ -0,0 +1,15 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console timer wrapup diff --git a/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in new file mode 100644 index 0000000000..e2def59237 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in new file mode 100644 index 0000000000..a817df7d46 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in new file mode 100644 index 0000000000..ccc33af739 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer # shmsupp +GENERIC_PIECES=# shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/mvme147s/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/Makefile.in new file mode 100644 index 0000000000..61010e50f6 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/Makefile.in @@ -0,0 +1,16 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console timer shmsupp wrapup + diff --git a/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in new file mode 100644 index 0000000000..fea609c5bf --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +SHARED_SRCS=ckinit.c + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += $(SHARED_SRCS) + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +$(SHARED_SRCS): + -$(LN) -s $(srcdir)/../../mvme147/clock/$@ $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in new file mode 100644 index 0000000000..6d5ee876d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +SHARED_SRCS=console.c + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += $(SHARED_SRCS) + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +$(SHARED_SRCS): + -$(LN) -s $(srcdir)/../../mvme147/console/$@ $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in new file mode 100644 index 0000000000..9006fb28e7 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in new file mode 100644 index 0000000000..8482d07f4c --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +SHARED_SRCS=bspclean.c sbrk.c setvec.c + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += $(SHARED_SRCS) + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +$(SHARED_SRCS): + -$(LN) -s $(srcdir)/../../mvme147/startup/$@ $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in new file mode 100644 index 0000000000..53729c4ecd --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in @@ -0,0 +1,63 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(S_FILES) $(H_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +SHARED_SRCS=timer.c timerisr.s + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += $(SHARED_SRCS) + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +$(SHARED_SRCS): + -$(LN) -s $(srcdir)/../../mvme147/timer/$@ $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in new file mode 100644 index 0000000000..0296916f22 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer shmsupp +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/m68k/mvme162/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/Makefile.in new file mode 100644 index 0000000000..c72d071f77 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +# +# XXXX add tools +SUB_DIRS=include startup clock console timer wrapup diff --git a/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in new file mode 100644 index 0000000000..e2def59237 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in new file mode 100644 index 0000000000..8c93d9a2fa --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/page_table.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in new file mode 100644 index 0000000000..3d7819f81c --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart page_table sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + diff --git a/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in new file mode 100644 index 0000000000..c2ba3476d3 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=timerisr +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in new file mode 100644 index 0000000000..4c363f303c --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in @@ -0,0 +1,52 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# we use host compiler here for genoffsets. Hopefully it has same alignment!! +USE_HOST_COMPILER=yes + +# C source names, if any, go here -- minus the .c +C_PIECES=sload +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +PGMS=${ARCH}/sload + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(PGMS) + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL) +install: all + $(INSTALL) -m 555 ${PGMS} ${PROJECT_RELEASE}/bin diff --git a/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in new file mode 100644 index 0000000000..bd06f5f90f --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/mips/README b/c/src/lib/libbsp/mips/README new file mode 100644 index 0000000000..805ed6c193 --- /dev/null +++ b/c/src/lib/libbsp/mips/README @@ -0,0 +1,3 @@ +The MIPS bsp are now called p4600 and p4650, referring to which cpu they use. +The same bsp sub-directory can be used, the cpu is selected by the bsp +specific makefiles (p4600.cfg and p4650.cfg). diff --git a/c/src/lib/libbsp/mips64orion/Makefile.in b/c/src/lib/libbsp/mips64orion/Makefile.in new file mode 100644 index 0000000000..7dbe87397c --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/Makefile.in @@ -0,0 +1,14 @@ +# +# Makefile,v 1.2 1995/05/31 16:56:44 joel Exp +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/mips64orion/README b/c/src/lib/libbsp/mips64orion/README new file mode 100644 index 0000000000..805ed6c193 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/README @@ -0,0 +1,3 @@ +The MIPS bsp are now called p4600 and p4650, referring to which cpu they use. +The same bsp sub-directory can be used, the cpu is selected by the bsp +specific makefiles (p4600.cfg and p4650.cfg). diff --git a/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in new file mode 100644 index 0000000000..7dfe2cbcde --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=led +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in new file mode 100644 index 0000000000..ac11a0e2f5 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/liblnk.rel + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=lnklib +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in new file mode 100644 index 0000000000..67478f0a83 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=idt_csu +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +PGM=${ARCH}/idt_csu.o + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in new file mode 100644 index 0000000000..38a14f71e8 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in @@ -0,0 +1,61 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart main sbrk setvec inittlb +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=idtmem idttlb +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=ghlinkcmds linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/ghlinkcmds $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + + + diff --git a/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in new file mode 100644 index 0000000000..ff57be1813 --- /dev/null +++ b/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in @@ -0,0 +1,52 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup console liblnk +CPU_PIECES=clock timer +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + +install: all + diff --git a/c/src/lib/libbsp/no_cpu/Makefile.in b/c/src/lib/libbsp/no_cpu/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in new file mode 100644 index 0000000000..039b961a77 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console shmsupp timer wrapup diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in new file mode 100644 index 0000000000..1bbbda6e96 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in new file mode 100644 index 0000000000..58d2734659 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in new file mode 100644 index 0000000000..c91ccb5214 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in new file mode 100644 index 0000000000..02891e718c --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in @@ -0,0 +1,60 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart main sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + $(INSTALL) linkcmds ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in new file mode 100644 index 0000000000..48c65c1c49 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in @@ -0,0 +1,60 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# NOTE: timerisr is normally an assembly file!!! + +# C source names, if any, go here -- minus the .c +C_PIECES=timer timerisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in new file mode 100644 index 0000000000..0e6fe816b0 --- /dev/null +++ b/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in @@ -0,0 +1,48 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup clock console shmsupp timer +GENERIC_PIECES=shmdr + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/powerpc/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in new file mode 100644 index 0000000000..17aaea81d5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in @@ -0,0 +1,19 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include dlentry flashentry startup wrapup diff --git a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in new file mode 100644 index 0000000000..2078226e73 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/dlentry.rel + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=dlentry +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in new file mode 100644 index 0000000000..e02c8bb3d6 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/flashentry.rel + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=flashentry +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in new file mode 100644 index 0000000000..20c100b31f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in @@ -0,0 +1,34 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include + +install: all diff --git a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in new file mode 100644 index 0000000000..cfbf683a91 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in @@ -0,0 +1,55 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart main sbrk setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in new file mode 100644 index 0000000000..875cb30396 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in @@ -0,0 +1,55 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup dlentry flashentry +# pieces to pick up out of libcpu/ppc +CPU_PIECES=ppc403/clock ppc403/timer ppc403/console ppc403/vectors +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + +install: all + diff --git a/c/src/lib/libbsp/shmdr/Makefile.in b/c/src/lib/libbsp/shmdr/Makefile.in new file mode 100644 index 0000000000..1f264207c9 --- /dev/null +++ b/c/src/lib/libbsp/shmdr/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmdr.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addlq cnvpkt getlq dump fatal getpkt init initlq intr mpisr \ + poll receive retpkt send setckvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_PIECES=shm mpci +H_FILES=$(H_PIECES:%=$(srcdir)/%.h) + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: preinstall ${ARCH} $(SRCS) $(PGM) + $(INSTALL_VARIANT) -m 644 $(PGM) ${PROJECT_RELEASE}/lib + +# the .rel file built here will be put into libbsp.a by +# ../$(RTEMS_BSP)/wrapup/Makefile + +preinstall: + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/sparc/Makefile.in b/c/src/lib/libbsp/sparc/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/sparc/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/sparc/erc32/Makefile.in b/c/src/lib/libbsp/sparc/erc32/Makefile.in new file mode 100644 index 0000000000..c4d00cd7a6 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/Makefile.in @@ -0,0 +1,16 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +# NOTE: we pick up HPPA clock and timer from libcpu/hppa +SUB_DIRS=startsis include startup console clock timer wrapup diff --git a/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in b/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in new file mode 100644 index 0000000000..3dd7213304 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in @@ -0,0 +1,59 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=ckinit +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/sparc/erc32/console/Makefile.in b/c/src/lib/libbsp/sparc/erc32/console/Makefile.in new file mode 100644 index 0000000000..58d2734659 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/console/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/sparc/erc32/include/Makefile.in b/c/src/lib/libbsp/sparc/erc32/include/Makefile.in new file mode 100644 index 0000000000..8022b50bb2 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/include/Makefile.in @@ -0,0 +1,34 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# +# If you add equate files, don't forget to uncomment the install line +# below. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/sparc/erc32/start/Makefile.in b/c/src/lib/libbsp/sparc/erc32/start/Makefile.in new file mode 100644 index 0000000000..07bd7ad73e --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/start/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/startsis.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=startsis +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in b/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in new file mode 100644 index 0000000000..07bd7ad73e --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGMS=${ARCH}/startsis.o + +# C source names, if any, go here -- minus the .c +C_PIECES= +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES=startsis +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in b/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in new file mode 100644 index 0000000000..f0afe26114 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in @@ -0,0 +1,65 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart sbrk setvec spurious +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +CC_PIECES=rtems-ctor +CC_FILES=$(CC_PIECES:%=%.cc) +CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) + +# We install the RTEMS constructor as a separate .o +# so it can be easily place correctly by the compiler config file. +INSTALLED_O_FILES=$(ARCH)/rtems-ctor.o + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) + $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in b/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in new file mode 100644 index 0000000000..6511afb8bf --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in @@ -0,0 +1,58 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in new file mode 100644 index 0000000000..4b680df9f0 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in @@ -0,0 +1,25 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +DESTDIR=$(PROJECT_RELEASE)/tests + +PGMS=runtest + +INSTALLED=$(PGMS:%=$(DESTDIR)/%) + +all: $(DESTDIR) $(PGMS) install + +install: $(INSTALLED) + +# Install the program +$(DESTDIR)/%: % + $(make-script) diff --git a/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in b/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in new file mode 100644 index 0000000000..b583e82f19 --- /dev/null +++ b/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +BSP_PIECES=startup console clock timer +# pieces to pick up out of libcpu/sparc +CPU_PIECES=reg_win +GENERIC_PIECES= + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + diff --git a/c/src/lib/libbsp/unix/Makefile.in b/c/src/lib/libbsp/unix/Makefile.in new file mode 100644 index 0000000000..a92e20d55e --- /dev/null +++ b/c/src/lib/libbsp/unix/Makefile.in @@ -0,0 +1,14 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +# Descend into the $(RTEMS_BSP) directory if it exists +SUB_DIRS=$(wildcard $(RTEMS_BSP)) diff --git a/c/src/lib/libbsp/unix/posix/Makefile.in b/c/src/lib/libbsp/unix/posix/Makefile.in new file mode 100644 index 0000000000..1a0df3d90b --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/Makefile.in @@ -0,0 +1,25 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/directory.cfg + +SRCS=README + +# MP_PARTS are the pieces of the BSP required in a MP environment +# We only build them if HAS_MP was defined + +MP_PARTS_yes_V = shmsupp +MP_PARTS = $(MP_PARTS_$(HAS_MP)_V) + +all: $(SRCS) + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUB_DIRS=include startup clock console timer $(MP_PARTS) wrapup diff --git a/c/src/lib/libbsp/unix/posix/clock/Makefile.in b/c/src/lib/libbsp/unix/posix/clock/Makefile.in new file mode 100644 index 0000000000..809910191e --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/clock/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/clock.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=clock +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += $(CFLAGS_OS_V) + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by +# ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/unix/posix/console/Makefile.in b/c/src/lib/libbsp/unix/posix/console/Makefile.in new file mode 100644 index 0000000000..ff608c8496 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/console/Makefile.in @@ -0,0 +1,53 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/console.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=console +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/unix/posix/include/Makefile.in b/c/src/lib/libbsp/unix/posix/include/Makefile.in new file mode 100644 index 0000000000..fd7d4d6077 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/include/Makefile.in @@ -0,0 +1,32 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h + +# +# Equate files are for including from assembly preprocessed by +# gm4 or gasp. No examples are provided except for those for +# other CPUs. The best way to generate them would be to +# provide a program which generates the constants used based +# on the C equivalents. +# + +EQ_FILES = + +SRCS=$(H_FILES) $(EQ_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +all: $(SRCS) + $(INSTALL) -m 444 $(H_FILES) ${PROJECT_RELEASE}/include + $(INSTALL) -m 444 $(EQ_FILES) ${PROJECT_RELEASE}/include diff --git a/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in b/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in new file mode 100644 index 0000000000..f0836ef414 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg intr lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + diff --git a/c/src/lib/libbsp/unix/posix/startup/Makefile.in b/c/src/lib/libbsp/unix/posix/startup/Makefile.in new file mode 100644 index 0000000000..fd016427e5 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/startup/Makefile.in @@ -0,0 +1,65 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/startup.rel +NO_CTOR_LIB=${ARCH}/libno-ctor.a + +# C source names, if any, go here -- minus the .c +C_PIECES=bspclean bspstart setvec +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +CC_PIECES=rtems-ctor +CC_FILES=$(CC_PIECES:%=%.cc) +CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) no-ctor.c +OBJS=$(C_O_FILES) + +# We install the RTEMS constructor as a separate .o +# so it can be easily place correctly by the compiler config file. +INSTALLED_O_FILES=$(ARCH)/rtems-ctor.o + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +${NO_CTOR_LIB}: $(ARCH)/no-ctor.o + $(RM) $@ + $(AR) -cvr $@ $(ARCH)/no-ctor.o + +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) ${NO_CTOR_LIB} + $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib + $(INSTALL_VARIANT) $(NO_CTOR_LIB) ${PROJECT_RELEASE}/lib diff --git a/c/src/lib/libbsp/unix/posix/timer/Makefile.in b/c/src/lib/libbsp/unix/posix/timer/Makefile.in new file mode 100644 index 0000000000..150619daba --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/timer/Makefile.in @@ -0,0 +1,54 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +SRCS=$(C_FILES) $(H_FILES) +OBJS=$(C_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += $(CFLAGS_OS_V) + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by +# ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/unix/posix/tools/Makefile.in b/c/src/lib/libbsp/unix/posix/tools/Makefile.in new file mode 100644 index 0000000000..fc5f40ba18 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/tools/Makefile.in @@ -0,0 +1,30 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +DESTDIR=$(PROJECT_RELEASE)/tests + +# We use the generic difftest +PGMS=runtest looptest semdump shmdump + +INSTALLED=$(PGMS:%=$(DESTDIR)/%) + +all: $(DESTDIR) $(PGMS) install + +install: $(INSTALLED) + +# Install the program, replacing #!KSHELL with $(KSH) +# and first line #!SHELL with $(SHELL) +$(DESTDIR)/%: % + -$(RM) $@.old + -$(MV) $@ $@.old >/dev/null 2>&1 + $(SED) -e '1,1s?^#!KSHELL?#!$(KSH)?' -e '1,1s?^#!SHELL?#!$(SHELL)?' < $< > $@ + $(CHMOD) 0555 $@ diff --git a/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in b/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in new file mode 100644 index 0000000000..7dbf6b7c44 --- /dev/null +++ b/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in @@ -0,0 +1,64 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH=@srcdir@ + +# MP_XXX_PARTS are the pieces of the BSP required in a MP environment +# We only build them if HAS_MP was defined + +MP_BSP_PARTS_yes_V = shmsupp +MP_BSP_PARTS = $(MP_BSP_PARTS_$(HAS_MP)_V) + +MP_GENERIC_PARTS_yes_V = shmdr +MP_GENERIC_PARTS = $(MP_GENERIC_PARTS_$(HAS_MP)_V) + + + +BSP_PIECES=startup clock console $(MP_BSP_PARTS) timer +# pieces to pick up out of libcpu/unix +CPU_PIECES= +GENERIC_PIECES=$(MP_GENERIC_PARTS) + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB=$(ARCH)/libbsp.a + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/lib.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +$(LIB): ${OBJS} + $(make-library) + +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib + |