diff options
Diffstat (limited to 'c/src/lib/libbsp/sh/gensh4/startup/bspstart.c')
-rw-r--r-- | c/src/lib/libbsp/sh/gensh4/startup/bspstart.c | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c b/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c new file mode 100644 index 0000000000..05788892cb --- /dev/null +++ b/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c @@ -0,0 +1,146 @@ +/* + * This routine starts the application. It includes application, + * board, and monitor specific initialization and configuration. + * The generic CPU dependent initialization has been performed + * before this routine is invoked. + * + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * + * COPYRIGHT (c) 1998-2001. + * On-Line Applications Research Corporation (OAR). + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <bsp.h> +#include <rtems/libio.h> + +#include <rtems/libcsupport.h> + +#include <string.h> + +/* + * The original table from the application and our copy of it with + * some changes. + */ + +extern void bsp_hw_init(void); + +extern rtems_configuration_table Configuration; + +rtems_configuration_table BSP_Configuration; + +rtems_cpu_table Cpu_table; + +char *rtems_progname; + +/* + * This variable is nesessary for console driver. + */ +unsigned32 SH4_CPU_HZ_Frequency = HZ; + +/* + * Use the shared implementations of the following routines + */ + +void bsp_postdriver_hook(void); +void bsp_libc_init( void *, unsigned32, int ); + +/* + * Function: bsp_pretasking_hook + * + * Description: + * BSP pretasking hook. Called just before drivers are initialized. + * Used to setup libc and install any BSP extensions. + * + * NOTES: + * Must not use libc (to do io) from here, since drivers are + * not yet initialized. + * + */ + +void bsp_pretasking_hook(void) +{ + bsp_libc_init(&HeapStart, (&HeapEnd - &HeapStart), 0); + +#ifdef RTEMS_DEBUG + rtems_debug_enable( RTEMS_DEBUG_ALL_MASK ); +#endif +} + +/* + * bsp_start + * + * This routine does the bulk of the system initialization. + */ + +void bsp_start(void) +{ + /* + For real boards you need to setup the hardware + and need to copy the vector table from rom to ram. + + Depending on the board this can ether be done from inside the rom + startup code, rtems startup code or here. + */ + +#ifndef START_HW_INIT + /* board hardware setup here, or from 'start.S' */ + bsp_hw_init(); +#endif + + /* + * Allocate the memory for the RTEMS Work Space. This can come from + * a variety of places: hard coded address, malloc'ed from outside + * RTEMS world (e.g. simulator or primitive memory manager), or (as + * typically done by stock BSPs) by subtracting the required amount + * of work space from the last physical address on the CPU board. + */ + + /* + * Need to "allocate" the memory for the RTEMS Workspace and + * tell the RTEMS configuration where it is. This memory is + * not malloc'ed. It is just "pulled from the air". + */ + + BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ; + BSP_Configuration.work_space_size = + (unsigned32) &WorkSpaceEnd - + (unsigned32) &WorkSpaceStart ; + + /* + * initialize the CPU table for this BSP + */ + +#if ( CPU_ALLOCATE_INTERRUPT_STACK == FALSE ) + _CPU_Interrupt_stack_low = &CPU_Interrupt_stack_low ; + _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ; + + /* This isn't used anywhere */ + Cpu_table.interrupt_stack_size = + (unsigned32) (&CPU_Interrupt_stack_high) - + (unsigned32) (&CPU_Interrupt_stack_low) ; +#endif + + + Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */ + Cpu_table.postdriver_hook = bsp_postdriver_hook; + +#if ( CPU_ALLOCATE_INTERRUPT_STACK == TRUE ) + Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY; +#endif + + Cpu_table.clicks_per_second = HZ ; +} |