diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc')
182 files changed, 2804 insertions, 5582 deletions
diff --git a/c/src/lib/libbsp/powerpc/configure.in b/c/src/lib/libbsp/powerpc/configure.in index 77835eaf26..6326c7e06d 100644 --- a/c/src/lib/libbsp/powerpc/configure.in +++ b/c/src/lib/libbsp/powerpc/configure.in @@ -11,8 +11,6 @@ RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc,$RTEMS_VERSION,no) AM_MAINTAINER_MODE -RTEMS_ENABLE_LIBCDIR - RTEMS_ENV_RTEMSBSP RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/Makefile.am new file mode 100644 index 0000000000..e8a7c6f744 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/Makefile.am @@ -0,0 +1,18 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include clock console startup start timer scv64 tod \ + sonic wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = QUIRKS README.net STATUS bsp_specs cable.doc times + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in deleted file mode 100644 index fe17a37367..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in +++ /dev/null @@ -1,48 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -# We only build the networking device driver if HAS_NETWORKING was defined -NETWORKING_DRIVER_yes_V = sonic -NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include clock console startup start timer scv64 tod \ - $(NETWORKING_DRIVER) wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am new file mode 100644 index 0000000000..f5f3fd8112 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/clock.rel + +C_FILES = clock.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = clock.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in deleted file mode 100644 index 643805ea48..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/clock.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/configure.in b/c/src/lib/libbsp/powerpc/dmv177/configure.in index 0b6351347d..100b0d0667 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/configure.in +++ b/c/src/lib/libbsp/powerpc/dmv177/configure.in @@ -8,50 +8,34 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-dmv177,$RTEMS_VERSION,no) AM_MAINTAINER_MODE +RTEMS_ENABLE_LIBCDIR RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENABLE_NETWORKING -RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CHECK_NETWORKING +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +clock/Makefile +console/Makefile +include/Makefile +scv64/Makefile +sonic/Makefile +start/Makefile +startup/Makefile +timer/Makefile +tod/Makefile +wrapup/Makefile) diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am new file mode 100644 index 0000000000..30616f4de0 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/console.rel + +C_FILES = conscfg.c console.c debugio.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = conscfg.c debugio.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in deleted file mode 100644 index 066e4958a6..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/console.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = conscfg console debugio -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am new file mode 100644 index 0000000000..2302aeeecb --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am @@ -0,0 +1,33 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h ../../../shared/include/coverhd.h dmv170.h \ + ../../../shared/tod.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: ../../../shared/include/coverhd.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/dmv170.h: dmv170.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/tod.h: ../../../shared/tod.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/dmv170.h \ + $(PROJECT_INCLUDE)/tod.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h dmv170.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in deleted file mode 100644 index 44dea341e7..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in +++ /dev/null @@ -1,53 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/../../../shared/include/coverhd.h \ - $(srcdir)/dmv170.h $(srcdir)/../../../shared/tod.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# -# If you add equate files, don't forget to uncomment the install line -# below. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am new file mode 100644 index 0000000000..7a552ad128 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/scv64.rel + +C_FILES = scv64.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = scv64.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in deleted file mode 100644 index 53a1bf210b..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in +++ /dev/null @@ -1,68 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = scv64 - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/scv64.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = $(SCV64_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -SCV64_C_PIECES = scv64 - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am new file mode 100644 index 0000000000..a91fafbf9e --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/sonic.rel + +C_FILES = dmvsonic.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +AM_CPPFLAGS += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = dmvsonic.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in deleted file mode 100644 index 2bd3f0fcd4..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = sonic - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/sonic.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = dmvsonic -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am new file mode 100644 index 0000000000..354f02440b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am @@ -0,0 +1,30 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGMS = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGMS) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES) + +EXTRA_DIST = start.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in deleted file mode 100644 index e22c3d3ba7..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGMS = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am new file mode 100644 index 0000000000..e0381c0f59 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am @@ -0,0 +1,38 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c genpvec.c vmeintr.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = bspclean.c bspstart.c genpvec.c linkcmds setvec.c vmeintr.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in deleted file mode 100644 index f060a25721..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - genpvec vmeintr gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am new file mode 100644 index 0000000000..7f16dcc233 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/timer.rel + +C_FILES = timer.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = timer.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in deleted file mode 100644 index fbad29fdbc..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = timer - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/timer.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = timer -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am new file mode 100644 index 0000000000..0887a9830b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/tod.rel + +C_FILES = todcfg.c tod.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = todcfg.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in deleted file mode 100644 index 3275aec0dd..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in +++ /dev/null @@ -1,68 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = tod - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/tod.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = todcfg $(TOD_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# First and second generation use different RTC chips :( -TOD_C_PIECES = tod - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am new file mode 100644 index 0000000000..792d785bb5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am @@ -0,0 +1,38 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +# We only build the networking device driver if HAS_NETWORKING was defined +if HAS_NETWORKING +NETWORKING = sonic +endif + +# pieces specific to this BSP +BSP_PIECES = startup clock console scv64 timer tod $(NETWORKING) + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in deleted file mode 100644 index b9a03b583d..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -# We only build the networking device driver if HAS_NETWORKING was defined -NETWORKING_DRIVER_yes_V = sonic -NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) - -# pieces specific to this BSP -BSP_PIECES = startup clock console scv64 timer tod $(NETWORKING_DRIVER) - -# pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES = - -# shared pieces -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.am new file mode 100644 index 0000000000..889da12850 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.am @@ -0,0 +1,17 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include startup start canbus console network wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = bsp_specs times + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in deleted file mode 100644 index b52e2d5ea3..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in +++ /dev/null @@ -1,47 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -# We only build the networking device driver if HAS_NETWORKING was defined -NETWORKING_DRIVER_yes_V = network -NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include startup start canbus console $(NETWORKING_DRIVER) wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.am new file mode 100644 index 0000000000..7b624a62c9 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/canbus.rel + +C_FILES = canbus.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +anclude $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = canbus.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in deleted file mode 100644 index 59210f05a1..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = canbus - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/canbus.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = canbus -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/configure.in b/c/src/lib/libbsp/powerpc/eth_comm/configure.in index 0b6351347d..c176cdafe0 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/configure.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/configure.in @@ -8,50 +8,31 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-eth_comm,$RTEMS_VERSION,no) AM_MAINTAINER_MODE +RTEMS_ENABLE_LIBCDIR RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENABLE_NETWORKING -RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CHECK_NETWORKING +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +canbus/Makefile +console/Makefile +include/Makefile +network/Makefile +start/Makefile +startup/Makefile +wrapup/Makefile) diff --git a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.am new file mode 100644 index 0000000000..82b58ef82e --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/console.rel + +C_FILES = console.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = console.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in deleted file mode 100644 index 810a0a40a1..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/console.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = console -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.am new file mode 100644 index 0000000000..680492e1b7 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h coverhd.h canbus.h info.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: coverhd.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/canbus.h: canbus.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/info.h: info.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/canbus.h \ + $(PROJECT_INCLUDE)/info.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h canbus.h coverhd.h info.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in deleted file mode 100644 index 2f69e11804..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in +++ /dev/null @@ -1,51 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h \ - $(srcdir)/info.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.am new file mode 100644 index 0000000000..a310556fa5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.am @@ -0,0 +1,36 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/network.rel + +C_FILES = network.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +AM_CPPFLAGS += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +if HAS_NETWORKING +all-local: $(ARCH) $(OBJS) $(PGM) +endif + +.PRECIOUS: $(PGM) + +EXTRA_DIST = README network.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in deleted file mode 100644 index 15506dfd03..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = network - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/network.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = network -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.am new file mode 100644 index 0000000000..824d7a22c5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGM) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = start.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in deleted file mode 100644 index 722a6ed21b..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.am new file mode 100644 index 0000000000..4b85006e62 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.am @@ -0,0 +1,39 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c alloc860.c mmu.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = alloc860.c bspstart.c linkcmds mmu.c setvec.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in deleted file mode 100644 index 79759c63f6..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in +++ /dev/null @@ -1,78 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - alloc860 mmu gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.am new file mode 100644 index 0000000000..9fa41cc877 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.am @@ -0,0 +1,40 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +# We only build the networking device driver if HAS_NETWORKING was defined +if HAS_NETWORKING +NETWORKING = network +endif + +BSP_PIECES = startup start canbus console $(NETWORKING) +# pieces to pick up out of libcpu/ppc +# CPU_PIECES = mpc860/clock mpc860/timer mpc860/console-generic \ +# mpc860/vectors + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in deleted file mode 100644 index b94f64e474..0000000000 --- a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -# We only build the networking device driver if HAS_NETWORKING was defined -NETWORKING_DRIVER_yes_V = network -NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) - -BSP_PIECES = startup start canbus console $(NETWORKING_DRIVER) -# pieces to pick up out of libcpu/ppc -# CPU_PIECES = mpc860/clock mpc860/timer mpc860/console-generic mpc860/vectors -CPU_PIECES = -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -install: all - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/Makefile.am new file mode 100644 index 0000000000..c4a517c567 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/Makefile.am @@ -0,0 +1,22 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = . include dlentry flashentry startup wrapup + +include $(top_srcdir)/../../bsp.am + +$(PROJECT_RELEASE)/lib/bsp_specs.dl: bsp_specs.dl + $(INSTALL_DATA) $< $@ + +PREINSTALL_FILES += $(PROJECT_RELEASE)/lib/bsp_specs.dl + +EXTRA_DIST = bsp_specs bsp_specs.dl times + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/Makefile.in deleted file mode 100644 index c1cb2d8b2f..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/Makefile.in +++ /dev/null @@ -1,43 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include dlentry flashentry startup wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/helas403/configure.in b/c/src/lib/libbsp/powerpc/helas403/configure.in index 0b6351347d..6c7c948394 100644 --- a/c/src/lib/libbsp/powerpc/helas403/configure.in +++ b/c/src/lib/libbsp/powerpc/helas403/configure.in @@ -8,50 +8,29 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-helas403,$RTEMS_VERSION,no) AM_MAINTAINER_MODE +RTEMS_ENABLE_LIBCDIR RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENABLE_NETWORKING -RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CHECK_NETWORKING +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +dlentry/Makefile +flashentry/Makefile +include/Makefile +startup/Makefile +wrapup/Makefile) diff --git a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.am new file mode 100644 index 0000000000..70c08c79f7 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/dlentry.rel + +S_FILES = dlentry.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = dlentry.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in deleted file mode 100644 index dc19dc41b0..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = dlentry - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/dlentry.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = dlentry -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.am new file mode 100644 index 0000000000..8ed973873f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/flashentry.rel + +S_FILES = flashentry.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = flashentry.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in deleted file mode 100644 index 00064c79af..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = flashentry - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/flashentry.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = flashentry -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.am new file mode 100644 index 0000000000..091727637a --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.am @@ -0,0 +1,25 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h coverhd.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: coverhd.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h coverhd.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in deleted file mode 100644 index e8c70a72e0..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in +++ /dev/null @@ -1,52 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) - -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.am new file mode 100644 index 0000000000..07786b4684 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.am @@ -0,0 +1,39 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = bspclean.c bspstart.c linkcmds linkcmds.dl setvec.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in deleted file mode 100644 index 94b1b170e4..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in +++ /dev/null @@ -1,73 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.am new file mode 100644 index 0000000000..e007524688 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.am @@ -0,0 +1,35 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +BSP_PIECES = startup dlentry flashentry +# pieces to pick up out of libcpu/ppc +# CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ +# ppc403/ictrl + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in deleted file mode 100644 index f923bdce73..0000000000 --- a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in +++ /dev/null @@ -1,72 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -BSP_PIECES = startup dlentry flashentry -# pieces to pick up out of libcpu/ppc -# CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ -# ppc403/ictrl -CPU_PIECES = -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -install: all - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am new file mode 100644 index 0000000000..705daffa04 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am @@ -0,0 +1,19 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = clock console include pci residual openpic irq vectors start \ + startup bootloader motorola wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = BOOTING README.MVME2300 README.OTHERBOARDS README.dec21140 \ + bsp_specs times.mcp750 times.mvme2307 + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in deleted file mode 100644 index 50c4992d94..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in +++ /dev/null @@ -1,44 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = clock console include pci residual openpic irq vectors start \ - startup bootloader motorola wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am new file mode 100644 index 0000000000..8e43957699 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am @@ -0,0 +1,65 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/console:@srcdir@/../../shared/bootloader + +C_FILES = misc.c pci.c zlib.c mm.c em86.c polled_io.c lib.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +H_FILES = bootldr.h zlib.h pci.h + +S_FILES = head.S exception.S em86real.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +AM_CPPFLAGS += -D__BOOT__ -DDEBUG +AM_CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple \ + -mstring -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata \ + -D__BOOT__ -DDEBUG + +ASFLAGS += -mrelocatable + +IMAGES = rtems.gz + +CLEANFILES += bootloader reloc.O +DISTCLEANFILES += $(IMAGES) + +# +# CAUTION : +# +# As we use very specific compilation options in this directory +# we shall not use any other code. This includes the newlib libc.a +# as well as other code located in .o files in mcp750 directory. +# +# NEVER remove lib.c. You have been warned... +# +bootloader : $(OBJS) $(IMAGES) $(BINARY_LOADED) ppcboot.lds + $(LD) -o bootloader $(OBJS) --just-symbols=$(BINARY_LOADED) \ + -b binary $(IMAGES) -T @srcdir@/../../shared/bootloader/ppcboot.lds \ + -Map bootloader.map + +check_unresolved : $(OBJS) + $(LD) -r -o reloc.O $(OBJS) + $(NM) reloc.O |grep ' U ' + echo "Every symbol listed should be defined in @srcdir@/ppcboot.lds" + +rtems: $(BINARY_LOADED) + $(OBJCOPY) $(BINARY_LOADED) rtems -O binary -R .comment -S + +rtems.gz: rtems + gzip -vf9 rtems + +all-local: $(ARCH) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in deleted file mode 100644 index a03db9e1d7..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in +++ /dev/null @@ -1,98 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = bootloader - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = \ - @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/console:@srcdir@/../../shared/bootloader - -# C source names, if any, go here -- minus the .c -C_PIECES = misc pci zlib mm em86 polled_io lib -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = bootldr.h zlib.h pci.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = head exception em86real -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -CC_PIECES = -CC_FILES = $(CC_PIECES:%=%.cc) -CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -D__BOOT__ -DDEBUG -CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ - -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata -D__BOOT__ \ - -DDEBUG - -ASFLAGS += -mrelocatable - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -IMAGES = rtems.gz - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want - -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += bootloader reloc.O -CLOBBER_ADDITIONS += $(IMAGES) - -# -# CAUTION : -# -# As we use very specific compilation options in this directory -# we shall not use any other code. This includes the newlib libc.a -# as well as other code located in .o files in mcp750 directory. -# -# NEVER remove lib.c. You have been warned... -# -bootloader : ${OBJS} $(IMAGES) $(BINARY_LOADED) ppcboot.lds - $(LD) -o bootloader $(OBJS) --just-symbols=$(BINARY_LOADED) \ - -b binary $(IMAGES) -T @srcdir@/../../shared/bootloader/ppcboot.lds \ - -Map bootloader.map - -check_unresolved : ${OBJS} - $(LD) -r -o reloc.O ${OBJS} - $(NM) reloc.O |grep ' U ' - echo "Every symbol listed should be defined in @srcdir@/ppcboot.lds" - -rtems.gz: $(BINARY_LOADED) - $(OBJCOPY) $(BINARY_LOADED) rtems -O binary -R .comment -S - gzip -vf9 rtems - rm -f rtems - -all: ${ARCH} $(SRCS) ${OBJ} - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.am new file mode 100644 index 0000000000..979bf52f1b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.am @@ -0,0 +1,25 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/clock + +C_FILES = p_clock.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in deleted file mode 100644 index 0075dce239..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/clock/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/clock - -# C source names, if any, go here -- minus the .c -C_PIECES = p_clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.in index 0b6351347d..19a3b557d5 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.in @@ -8,50 +8,37 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-motorola_powerpc,$RTEMS_VERSION,no) AM_MAINTAINER_MODE +RTEMS_ENABLE_LIBCDIR RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENABLE_NETWORKING -RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CHECK_NETWORKING +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +bootloader/Makefile +clock/Makefile +console/Makefile +include/Makefile +irq/Makefile +motorola/Makefile +openpic/Makefile +pci/Makefile +residual/Makefile +start/Makefile +startup/Makefile +vectors/Makefile +wrapup/Makefile) diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.am new file mode 100644 index 0000000000..202b2eaa8b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.am @@ -0,0 +1,28 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/console:@srcdir@/../../../shared + +C_FILES = polled_io.c uart.c console.c inch.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +H_FILES = ../../shared/console/consoleIo.h ../../shared/console/keyboard.h \ + ../../shared/console/uart.h + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +AM_CPPFLAGS += -DSTATIC_LOG_ALLOC + +all-local: $(ARCH) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in deleted file mode 100644 index 33f9f9c387..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/console:@srcdir@/../../../shared - -# C source names, if any, go here -- minus the .c -C_PIECES = polled_io uart console inch -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/console/consoleIo.h \ - $(srcdir)/../../shared/console/keyboard.h \ - $(srcdir)/../../shared/console/uart.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CC_PIECES = -CC_FILES = $(CC_PIECES:%=%.cc) -CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) - -# -# (OPTIONAL) Add local stuff here using += -# - -CPPFLAGS += -DSTATIC_LOG_ALLOC -CFLAGS += -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want - -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -all: ${ARCH} $(SRCS) ${OBJS} - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.am new file mode 100644 index 0000000000..a6ee837cdc --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.am @@ -0,0 +1,48 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = ../../shared/include/nvram.h ../../shared/include/bsp.h \ + ../../../shared/include/coverhd.h + +BSP_H_FILES = ../../shared/console/consoleIo.h ../../shared/console/uart.h \ + ../../shared/irq/irq.h ../../shared/motorola/motorola.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp: + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/nvram.h: ../../shared/include/nvram.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp.h: ../../shared/include/bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: ../../../shared/include/coverhd.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp/consoleIo.h: ../../shared/console/consoleIo.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp/uart.h: ../../shared/console/uart.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp/irq.h: ../../shared/irq/irq.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp/motorola.h: ../../shared/motorola/motorola.h + $(INSTALL_DATA) $< $@ + +PREINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp \ + $(PROJECT_INCLUDE)/nvram.h $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/bsp/consoleIo.h \ + $(PROJECT_INCLUDE)/bsp/uart.h $(PROJECT_INCLUDE)/bsp/irq.h \ + $(PROJECT_INCLUDE)/bsp/motorola.h + +all-local: $(PREINSTALL_FILES) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in deleted file mode 100644 index 39692c9cdc..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in +++ /dev/null @@ -1,60 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/../../shared/include/nvram.h \ - $(srcdir)/../../shared/include/bsp.h \ - $(srcdir)/../../../shared/include/coverhd.h - -BSP_H_FILES = $(srcdir)/../../shared/console/consoleIo.h \ - $(srcdir)/../../shared/console/uart.h $(srcdir)/../../shared/irq/irq.h \ - $(srcdir)/../../shared/motorola/motorola.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - $(mkinstalldirs) $(PROJECT_INCLUDE) - $(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - @$(INSTALL_CHANGE) -m 644 $(BSP_H_FILES) $(PROJECT_INCLUDE)/bsp - -all: $(SRCS) preinstall - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.am new file mode 100644 index 0000000000..44fe052a2e --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.am @@ -0,0 +1,29 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/irq + +C_FILES = irq_init.c i8259.c irq.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +# FIXME: this does give any sense here +H_FILES = ../../shared/irq/irq.h + +S_FILES = irq_asm.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +all-local: $(ARCH) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in deleted file mode 100644 index 57116c2ab8..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = irq - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/irq - -# C source names, if any, go here -- minus the .c -C_PIECES = irq_init i8259 irq -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/irq/irq.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = irq_asm -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) ${OBJS} - -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.am new file mode 100644 index 0000000000..59e52de5c3 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.am @@ -0,0 +1,28 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/motorola + +C_FILES = motorola.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +# FIXME: This doesn't give any sense here +H_FILES = ../../shared/motorola/motorola.h + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.in deleted file mode 100644 index b8ee6f946b..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/motorola/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = motorola - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/motorola - -# C source names, if any, go here -- minus the .c -C_PIECES = motorola -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/motorola/motorola.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.am new file mode 100644 index 0000000000..be3141a744 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/openpic + +C_FILES = openpic.c + +H_FILES = ../../shared/openpic/openpic.h + +OBJS = $(C_FILES:%.c=$(ARCH)/%.o) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +$(PROJECT_INCLUDE)/bsp: + $(mkinstalldirs) $< $@ + +$(PROJECT_INCLUDE)/bsp/openpic.h: ../../shared/openpic/openpic.h + $(INSTALL_DATA) $< $@ + +# +# (OPTIONAL) Add local stuff here using += +# + +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/openpic.h + +all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in deleted file mode 100644 index d42d217496..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in +++ /dev/null @@ -1,72 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = openpic - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/openpic - -# C source names, if any, go here -- minus the .c -C_PIECES = $(OPENPIC_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/openpic/openpic.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -OPENPIC_C_PIECES = openpic - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.am new file mode 100644 index 0000000000..32d9e7e96d --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/pci + +C_FILES = pci.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +H_FILES = ../../shared/pci/pci.h + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_INCLUDE)/bsp: + $(mkinstalldirs) $< + +$(PROJECT_INCLUDE)/bsp/pci.h: ../../shared/pci/pci.h + $(INSTALL_DATA) $< $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/pci.h + +all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in deleted file mode 100644 index 206fcf179f..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = pci - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/pci - -# C source names, if any, go here -- minus the .c -C_PIECES = pci -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/pci/pci.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.am new file mode 100644 index 0000000000..add4fd61a8 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.am @@ -0,0 +1,38 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/residual + +C_FILES = residual.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +H_FILES = ../../shared/residual/pnp.h ../../shared/residual/residual.h + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_INCLUDE)/bsp: + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp/pnp.h: ../../shared/residual/pnp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/bsp/residual.h: ../../shared/residual/residual.h + $(INSTALL_DATA) $< $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/pnp.h \ + $(PROJECT_INCLUDE)/bsp/residual.h + +all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in deleted file mode 100644 index fb9fce42fb..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in +++ /dev/null @@ -1,73 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = residual - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/residual - -# C source names, if any, go here -- minus the .c -C_PIECES = $(RESIDUAL_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/residual/pnp.h \ - $(srcdir)/../../shared/residual/residual.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -RESIDUAL_C_PIECES = residual - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.am new file mode 100644 index 0000000000..af4903eb54 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../shared/start + +PGM = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGM) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in deleted file mode 100644 index 859b05713e..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/start - -PGM = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.am new file mode 100644 index 0000000000..ca1c49cea2 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.am @@ -0,0 +1,36 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = \ + @srcdir@:@srcdir@/../console:@srcdir@/../../../shared:@srcdir@/../../shared/startup + +C_FILES = bootcard.c main.c bspstart.c bsppost.c bsplibc.c sbrk.c bspclean.c \ + gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +# FIXME: This should not be here +# $(PROJECT_RELEASE)/lib/libbsp.a: +# cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS) + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES) + +EXTRA_DIST = linkcmds + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in deleted file mode 100644 index 8da11b0b61..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = \ - @srcdir@:@srcdir@/../console:@srcdir@/../../../shared:@srcdir@/../../shared/startup - -# C source names, if any, go here -- minus the .c -C_PIECES = bootcard main bspstart bsppost bsplibc sbrk bspclean \ - gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -$(PROJECT_RELEASE)/lib/libbsp.a: - cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.am new file mode 100644 index 0000000000..42bc5d4533 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.am @@ -0,0 +1,39 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors + +C_FILES = vectors_init.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +H_FILES = ../../shared/vectors/vectors.h + +S_FILES = vectors.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_INCLUDE)/bsp: + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp/vectors.h: ../../shared/vectors/vectors.h + $(INSTALL_DATA) $< $@ + +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/vectors.h + +all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in deleted file mode 100644 index 1a2a51cdce..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = vectors - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors - -# C source names, if any, go here -- minus the .c -C_PIECES = vectors_init -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/vectors/vectors.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = vectors -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.am new file mode 100644 index 0000000000..88c149b8a8 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +BSP_PIECES = clock console irq openpic pci residual startup vectors motorola + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in deleted file mode 100644 index babf10ac30..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in +++ /dev/null @@ -1,59 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -BSP_PIECES = clock console irq openpic pci residual startup vectors motorola -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/Makefile.am new file mode 100644 index 0000000000..fe52252374 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/Makefile.am @@ -0,0 +1,17 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include dlentry flashentry startup wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = bsp_specs times + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in deleted file mode 100644 index c1cb2d8b2f..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in +++ /dev/null @@ -1,43 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include dlentry flashentry startup wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/papyrus/configure.in b/c/src/lib/libbsp/powerpc/papyrus/configure.in index 0b6351347d..e046ab797f 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/configure.in +++ b/c/src/lib/libbsp/powerpc/papyrus/configure.in @@ -8,50 +8,30 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-papyrus,$RTEMS_VERSION,no) AM_MAINTAINER_MODE +RTEMS_ENABLE_LIBCDIR RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENABLE_NETWORKING -RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CHECK_NETWORKING +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +dlentry/Makefile +flashentry/Makefile +include/Makefile +startup/Makefile +wrapup/Makefile) + diff --git a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.am new file mode 100644 index 0000000000..70c08c79f7 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/dlentry.rel + +S_FILES = dlentry.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = dlentry.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in deleted file mode 100644 index dc19dc41b0..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = dlentry - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/dlentry.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = dlentry -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.am new file mode 100644 index 0000000000..8ed973873f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/flashentry.rel + +S_FILES = flashentry.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = flashentry.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in deleted file mode 100644 index 00064c79af..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = flashentry - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/flashentry.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = flashentry -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.am new file mode 100644 index 0000000000..091727637a --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.am @@ -0,0 +1,25 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h coverhd.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: coverhd.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h coverhd.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in deleted file mode 100644 index e8c70a72e0..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in +++ /dev/null @@ -1,52 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) - -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.am new file mode 100644 index 0000000000..887b0fa744 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.am @@ -0,0 +1,39 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = bspclean.c bspstart.c linkcmds setvec.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in deleted file mode 100644 index 94b1b170e4..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in +++ /dev/null @@ -1,73 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.am new file mode 100644 index 0000000000..e007524688 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.am @@ -0,0 +1,35 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +BSP_PIECES = startup dlentry flashentry +# pieces to pick up out of libcpu/ppc +# CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ +# ppc403/ictrl + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in deleted file mode 100644 index f923bdce73..0000000000 --- a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in +++ /dev/null @@ -1,72 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -BSP_PIECES = startup dlentry flashentry -# pieces to pick up out of libcpu/ppc -# CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ -# ppc403/ictrl -CPU_PIECES = -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -install: all - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.am new file mode 100644 index 0000000000..59c3997569 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.am @@ -0,0 +1,18 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include clock console startup start timer tod network universe pci \ + nvram vectors wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = STATUS bsp_specs + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in deleted file mode 100644 index e0f6e601a0..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in +++ /dev/null @@ -1,48 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -# We only build the network device driver if HAS_NETWORK was defined -# NETWORK_DRIVER_yes_V = network -# NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V) - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include clock console startup start timer tod $(NETWORK_DRIVER) \ - universe pci nvram vectors wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.am new file mode 100644 index 0000000000..f5f3fd8112 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/clock.rel + +C_FILES = clock.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = clock.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in deleted file mode 100644 index 0824086899..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/clock.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/configure.in b/c/src/lib/libbsp/powerpc/ppcn_60x/configure.in index 0b6351347d..c1eca406a8 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/configure.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/configure.in @@ -8,50 +8,41 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-ppcn_60x,$RTEMS_VERSION,no) AM_MAINTAINER_MODE -RTEMS_ENABLE_MULTIPROCESSING -RTEMS_ENABLE_NETWORKING RTEMS_ENABLE_LIBCDIR +RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) +RTEMS_CHECK_NETWORKING RTEMS_CANONICAL_HOST RTEMS_PROJECT_ROOT -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS +# Don't build the network directory +# The problem is that the code there has not yet been converted to +# bsd networking +AM_CONDITIONAL(HAS_NETWORKING,false) +# AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") -RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) -RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi - -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi -AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") - -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here + +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +clock/Makefile +console/Makefile +include/Makefile +network/Makefile +nvram/Makefile +pci/Makefile +start/Makefile +startup/Makefile +timer/Makefile +tod/Makefile +universe/Makefile +vectors/Makefile +wrapup/Makefile) + diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.am new file mode 100644 index 0000000000..835d386666 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/console.rel + +C_FILES = console.c i8042vga.c i8042.c ns16550cfg.c z85c30cfg.c vga.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = config.c console.c console.h debugio.c i8042.c i8042_p.h \ + i8042vga.c i8042vga.h ns16550cfg.c ns16550cfg.h vga.c vga_p.h \ + z85c30cfg.c z85c30cfg.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in deleted file mode 100644 index 23aafd8b7d..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/console.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = console i8042vga i8042 ns16550cfg z85c30cfg vga -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.am new file mode 100644 index 0000000000..a4777f556c --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.am @@ -0,0 +1,40 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h ../../../shared/include/coverhd.h chain.h tod.h nvram.h \ + pci.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: ../../../shared/include/coverhd.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/chain.h: chain.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/tod.h: tod.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/nvram.h: nvram.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/pci.h: pci.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/chain.h \ + $(PROJECT_INCLUDE)/tod.h $(PROJECT_INCLUDE)/nvram.h \ + $(PROJECT_INCLUDE)/pci.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h chain.h extisrdrv.h nvram.h pci.h tod.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in deleted file mode 100644 index d620740904..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in +++ /dev/null @@ -1,53 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/../../../shared/include/coverhd.h \ - $(srcdir)/chain.h $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# -# If you add equate files, don't forget to uncomment the install line -# below. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.am new file mode 100644 index 0000000000..59928cc3b2 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/network.rel + +C_FILES = amd79c970.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +if HAS_NETWORKING +all-local: $(ARCH) $(OBJS) $(PGM) +endif + +.PRECIOUS: $(PGM) + +EXTRA_DIST = amd79c970.c amd79c970.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in deleted file mode 100644 index 9465ed9b26..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = network - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/network.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = amd79c970 -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.am new file mode 100644 index 0000000000..8bcadd2b2f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/nvram.rel + +C_FILES = nvram.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = ds1385.h mk48t18.h nvram.c prepnvr.h stk11c68.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in deleted file mode 100644 index 039594752d..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = nvram - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/nvram.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = $(NVRAM_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -NVRAM_C_PIECES = nvram - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.am new file mode 100644 index 0000000000..25081b608a --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/pci.rel + +C_FILES = pci.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = pci.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in deleted file mode 100644 index 3e66162a4a..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = pci - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/pci.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = $(PCI_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -PCI_C_PIECES = pci - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.am new file mode 100644 index 0000000000..824d7a22c5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGM) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = start.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in deleted file mode 100644 index 722a6ed21b..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.am new file mode 100644 index 0000000000..28eb6236d8 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.am @@ -0,0 +1,48 @@ +## +## $Id: +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspstart.c bspclean.c sbrk.c setvec.c spurious.c genpvec.c swap.c \ + main.c bootcard.c bsplibc.c bsppost.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +S_FILES = bsptrap.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +#FIXME: What is this? +# Files expected to be from the shared directory: +# sbrk bootcard main bsplibc bsppost +STARTUP_C_PIECES = bspstart bspclean sbrk setvec spurious genpvec swap main \ + bootcard bsplibc bsppost + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = bspclean.c bspstart.c bsptrap.S genpvec.c linkcmds \ + rtems-ctor.cc setvec.c spurious.c swap.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in deleted file mode 100644 index 761d3d9786..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in +++ /dev/null @@ -1,80 +0,0 @@ -# -# $Id: -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspstart bspclean sbrk setvec spurious genpvec swap main bootcard \ - bsplibc bsppost gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = bsptrap -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# Files expected to be from the shared directory: -# sbrk bootcard main bsplibc bsppost -STARTUP_C_PIECES = bspstart bspclean sbrk setvec spurious genpvec swap main \ - bootcard bsplibc bsppost - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.am new file mode 100644 index 0000000000..7f16dcc233 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/timer.rel + +C_FILES = timer.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = timer.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in deleted file mode 100644 index 0058c8e5db..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = timer - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/timer.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = timer -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.am new file mode 100644 index 0000000000..90bb37fe0b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/tod.rel + +C_FILES = tod.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = cmos.h tod.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in deleted file mode 100644 index 911a5d6264..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = tod - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/tod.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = $(TOD_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -TOD_C_PIECES = tod - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.am new file mode 100644 index 0000000000..a3e1e122dd --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/universe.rel + +C_FILES = universe.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = universe.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in deleted file mode 100644 index ddd86a4d9a..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = universe - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/universe.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = universe -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.am new file mode 100644 index 0000000000..3c2da3a009 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/vectors.rel + +S_FILES = vectors.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = README align_h.S vectors.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in deleted file mode 100644 index 3ce208fac7..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = vectors - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/vectors.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = vectors -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.am new file mode 100644 index 0000000000..f5d8d44a5f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.am @@ -0,0 +1,39 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +# We only build the network device driver if HAS_NETWORK was defined +if HAS_NETWORKING +NETWORK = network +endif + +BSP_PIECES = startup clock console timer tod $(NETWORK) nvram \ + universe pci vectors +# pieces to pick up out of libcpu/$(RTEMS_CPU) + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in deleted file mode 100644 index 6ad9dd6d7b..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in +++ /dev/null @@ -1,72 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -# We only build the network device driver if HAS_NETWORK was defined -NETWORK_DRIVER_yes_V = network -NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V) - -BSP_PIECES = startup clock console timer tod $(NETWORK_DRIVER) nvram \ - universe pci vectors -# pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES = -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/Makefile.am b/c/src/lib/libbsp/powerpc/psim/Makefile.am new file mode 100644 index 0000000000..04b9f71aab --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/Makefile.am @@ -0,0 +1,18 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include start clock console startup shmsupp timer vectors \ + wrapup tools + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = bsp_specs + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/Makefile.in b/c/src/lib/libbsp/powerpc/psim/Makefile.in deleted file mode 100644 index bf159090cb..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/Makefile.in +++ /dev/null @@ -1,49 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# shmsupp augments shmdr -- the portable shared memory MPCI layer -# We only build it if HAS_MP was defined -MP_DRIVERS_yes_V = shmsupp -MP_DRIVERS = $(MP_DRIVERS_$(HAS_MP)_V) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include start clock console startup $(MP_DRIVERS) timer vectors \ - wrapup tools - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.am b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.am new file mode 100644 index 0000000000..f5f3fd8112 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/clock.rel + +C_FILES = clock.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = clock.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in deleted file mode 100644 index 643805ea48..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/clock.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/configure.in b/c/src/lib/libbsp/powerpc/psim/configure.in index 0b6351347d..7a86b783a8 100644 --- a/c/src/lib/libbsp/powerpc/psim/configure.in +++ b/c/src/lib/libbsp/powerpc/psim/configure.in @@ -8,50 +8,32 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-psim,$RTEMS_VERSION,no) AM_MAINTAINER_MODE -RTEMS_ENABLE_MULTIPROCESSING -RTEMS_ENABLE_NETWORKING RTEMS_ENABLE_LIBCDIR +RTEMS_ENABLE_MULTIPROCESSING RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU -RTEMS_CANONICAL_HOST - -RTEMS_PROJECT_ROOT - -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_CANONICAL_HOST -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi +RTEMS_PROJECT_ROOT AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) +AC_CONFIG_SUBDIRS(tools) -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +clock/Makefile +console/Makefile +include/Makefile +shmsupp/Makefile +start/Makefile +startup/Makefile +timer/Makefile +vectors/Makefile +wrapup/Makefile) diff --git a/c/src/lib/libbsp/powerpc/psim/console/Makefile.am b/c/src/lib/libbsp/powerpc/psim/console/Makefile.am new file mode 100644 index 0000000000..1c753810c1 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/console/Makefile.am @@ -0,0 +1,35 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/console.rel + +C_FILES = console.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +S_FILES = consupp.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = console.c consupp.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in b/c/src/lib/libbsp/powerpc/psim/console/Makefile.in deleted file mode 100644 index 4d3852b153..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/console.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = console -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = consupp -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/include/Makefile.am b/c/src/lib/libbsp/powerpc/psim/include/Makefile.am new file mode 100644 index 0000000000..091727637a --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/include/Makefile.am @@ -0,0 +1,25 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h coverhd.h + +$(PROJECT_INCLUDE): + $(mkinstalldirs) $@ + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: coverhd.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h coverhd.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in deleted file mode 100644 index 8a2fa40e65..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in +++ /dev/null @@ -1,52 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# -# If you add equate files, don't forget to uncomment the install line -# below. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.am b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.am new file mode 100644 index 0000000000..07ad321462 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.am @@ -0,0 +1,34 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/shmsupp.rel + +C_FILES = addrconv.c getcfg.c lock.c mpisr.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +if HAS_MP +all-local: $(ARCH) $(OBJS) $(PGM) +endif + +.PRECIOUS: $(PGM) + +EXTRA_DIST = README addrconv.c getcfg.c lock.c mpisr.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in deleted file mode 100644 index 8e69f28a17..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = shmsupp - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/shmsupp.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = addrconv getcfg lock mpisr -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/start/Makefile.am b/c/src/lib/libbsp/powerpc/psim/start/Makefile.am new file mode 100644 index 0000000000..824d7a22c5 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/start/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGM) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = start.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in b/c/src/lib/libbsp/powerpc/psim/start/Makefile.in deleted file mode 100644 index 722a6ed21b..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.am b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.am new file mode 100644 index 0000000000..0afcb9a929 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.am @@ -0,0 +1,42 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +$(PROJECT_RELEASE)/lib/device-tree: device-tree + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds \ + $(PROJECT_RELEASE)/lib/device-tree + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = bspclean.c bspstart.c device-tree linkcmds setvec.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in deleted file mode 100644 index 1b9b125f57..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in +++ /dev/null @@ -1,76 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = linkcmds device-tree $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - $(INSTALL_CHANGE) -m 644 $(srcdir)/device-tree $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.am b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.am new file mode 100644 index 0000000000..7f16dcc233 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/timer.rel + +C_FILES = timer.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = timer.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in deleted file mode 100644 index fbad29fdbc..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = timer - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/timer.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = timer -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.am b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.am new file mode 100644 index 0000000000..a2a94d7acd --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/vectors.rel + +S_FILES = align_h.S vectors.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = README align_h.S vectors.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in deleted file mode 100644 index 2465102202..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = vectors - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/vectors.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = align_h vectors -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.am new file mode 100644 index 0000000000..e563b9eb63 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.am @@ -0,0 +1,44 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +BSP_PIECES = startup clock console timer vectors + +if HAS_MP +GENERIC_MP_REL_PIECES = shmdr +endif +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES) + +if HAS_MP +BSP_MP_O_PIECES = shmsupp +endif +BSP_PIECES += $(BSP_MP_O_PIECES) + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) + +LIB = $(ARCH)/libbsp.a + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in deleted file mode 100644 index a07a971480..0000000000 --- a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -BSP_PIECES = startup clock console timer vectors -# pieces to pick up out of libcpu/ppc -CPU_PIECES = -GENERIC_PIECES = - -GENERIC_MP_REL_PIECES_yes_V = shmdr -GENERIC_MP_REL_PIECES_no_V = -GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) - -BSP_MP_O_PIECES_yes_V = shmsupp -BSP_MP_O_PIECES_no_V = -BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/Makefile.am new file mode 100644 index 0000000000..a907ce6b0f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/Makefile.am @@ -0,0 +1,18 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +# wrapup is the one that actually builds and installs the library +# from the individual .rel files built in other directories +SUBDIRS = include clock console startup start timer tod PCI_bus vectors \ + wrapup + +include $(top_srcdir)/../../bsp.am + +EXTRA_DIST = bsp_specs + +include $(top_srcdir)/../../../../../../automake/subdirs.am +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/Makefile.in deleted file mode 100644 index 8457c048dd..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/Makefile.in +++ /dev/null @@ -1,44 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = . - -ACLOCAL = aclocal -AUTOCONF = autoconf -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = include clock console startup start timer tod PCI_bus vectors \ - wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) - cd $(srcdir) && $(AUTOCONF) diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.am new file mode 100644 index 0000000000..4cc465ced1 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/PCI_bus.rel + +C_FILES = universe.c PCI.c flash.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = PCI.c PCI.h flash.c universe.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in deleted file mode 100644 index 5bd277aa98..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = PCI_bus - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/PCI_bus.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = universe PCI flash -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.am new file mode 100644 index 0000000000..f5f3fd8112 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/clock.rel + +C_FILES = clock.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = clock.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in deleted file mode 100644 index 0824086899..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/clock.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/configure.in b/c/src/lib/libbsp/powerpc/score603e/configure.in index 0b6351347d..6904d2a02e 100644 --- a/c/src/lib/libbsp/powerpc/score603e/configure.in +++ b/c/src/lib/libbsp/powerpc/score603e/configure.in @@ -8,50 +8,29 @@ RTEMS_TOP(../../../../../..) AC_CONFIG_AUX_DIR(../../../../../..) RTEMS_CANONICAL_TARGET_CPU -AC_PROG_MAKE_SET -AC_PROG_INSTALL +AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-score603e,$RTEMS_VERSION,no) AM_MAINTAINER_MODE -RTEMS_ENABLE_MULTIPROCESSING -RTEMS_ENABLE_NETWORKING RTEMS_ENABLE_LIBCDIR RTEMS_ENV_RTEMSBSP - -RTEMS_CHECK_CPU +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) +RTEMS_CHECK_BSP_CACHE(RTEMS_BSP) RTEMS_CANONICAL_HOST RTEMS_PROJECT_ROOT -dnl check target cc -RTEMS_PROG_CC_FOR_TARGET -RTEMS_CANONICALIZE_TOOLS - -RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) -RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP) -RTEMS_CHECK_NETWORKING(RTEMS_BSP) - -# find all the Makefiles for the BSPs -RTEMS_CHECK_MAKEFILE(.) - -# HACK: sed out bsp-tools from makefiles -t="tools" -if test -d "$srcdir/$t"; then - bsptools_cfgdirs="$bsptools_cfgdirs $t" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi - -if test "$HAS_MP" = "yes"; then -: -else - # HACK: sed out shmsupp/Makefile from makefiles - t="shmsupp" - makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"` -fi -AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes") - -AC_CONFIG_SUBDIRS($bsptools_cfgdirs) - -# try to explicitly list a Makefile here +# Explicitly list a Makefile here AC_OUTPUT( -$makefiles) +Makefile +PCI_bus/Makefile +clock/Makefile +console/Makefile +include/Makefile +start/Makefile +startup/Makefile +timer/Makefile +tod/Makefile +vectors/Makefile +wrapup/Makefile) + diff --git a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.am new file mode 100644 index 0000000000..d5046de240 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.am @@ -0,0 +1,33 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/console.rel + +C_FILES = 85c30.c console.c consolereserveresources.c tbl85c30.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = 85c30.c 85c30.h console.c consolebsp.h \ + consolereserveresources.c tbl85c30.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in deleted file mode 100644 index bb551f86cc..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/console.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = 85c30 console consolereserveresources tbl85c30 -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.am new file mode 100644 index 0000000000..986b0fe056 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.am @@ -0,0 +1,36 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +H_FILES = bsp.h coverhd.h chain.h gen1.h gen2.h tod.h + +$(PROJECT_INCLUDE)/bsp.h: bsp.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/coverhd.h: coverhd.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/chain.h: chain.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/gen1.h: gen1.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/gen2.h: gen2.h + $(INSTALL_DATA) $< $@ + +$(PROJECT_INCLUDE)/tod.h: tod.h + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \ + $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/chain.h \ + $(PROJECT_INCLUDE)/gen1.h $(PROJECT_INCLUDE)/gen2.h \ + $(PROJECT_INCLUDE)/tod.h + +all-local: $(TMPINSTALL_FILES) + +EXTRA_DIST = bsp.h chain.h coverhd.h gen1.h gen2.h tod.h + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in deleted file mode 100644 index 7d687fab5a..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in +++ /dev/null @@ -1,53 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ - $(srcdir)/gen1.h $(srcdir)/gen2.h $(srcdir)/tod.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# -# If you add equate files, don't forget to uncomment the install line -# below. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.am new file mode 100644 index 0000000000..354f02440b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.am @@ -0,0 +1,30 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGMS = $(ARCH)/start.o + +S_FILES = start.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGMS) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o + +all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES) + +EXTRA_DIST = start.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in deleted file mode 100644 index e22c3d3ba7..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGMS = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.am new file mode 100644 index 0000000000..32521bbf8f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.am @@ -0,0 +1,46 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +VPATH = @srcdir@:@srcdir@/../../../shared + +PGM = $(ARCH)/startup.rel + +# +# First and second generation use different Bridge chips :( +# Generation 1 --> 82378zb +# Generation 2 --> FPGA +STARTUP_C_FILES = 82378zb.c FPGA.c + +C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \ + setvec.c Hwr_init.c spurious.c genpvec.c $(STARTUP_C_FILES) \ + gnatinstallhandler.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +$(PROJECT_RELEASE)/lib/linkcmds: linkcmds + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds + +all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = 82378zb.c FPGA.c Hwr_init.c bspclean.c bspstart.c genpvec.c \ + linkcmds setvec.c spurious.c vmeintr.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in deleted file mode 100644 index 8d8482f605..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in +++ /dev/null @@ -1,81 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared - -PGM = ${ARCH}/startup.rel - -# C source names, if any, go here -- minus the .c -# -# First and second generation use different Bridge chips :( -# Generation 1 --> 82378zb -# Generation 2 --> FPGA -STARTUP_C_PIECES = 82378zb FPGA - -C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - Hwr_init spurious genpvec $(STARTUP_C_PIECES) gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.am new file mode 100644 index 0000000000..7f16dcc233 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/timer.rel + +C_FILES = timer.c +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = timer.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in deleted file mode 100644 index 0058c8e5db..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = timer - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/timer.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = timer -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.s) -S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.am new file mode 100644 index 0000000000..f56d2670fa --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.am @@ -0,0 +1,38 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/tod.rel + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# generation 1 +TOD_C_FILES_1_V = tod_g1.c +# generation 2 +TOD_C_FILES_2_V = tod.c +TOD_C_FILES = $(TOD_C_FILES_$(SCORE603E_GENERATION)_V) + +C_FILES = $(TOD_C_FILES) +C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o) + +OBJS = $(C_O_FILES) + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = tod.c tod_g1.c + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in deleted file mode 100644 index 8f229e5910..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in +++ /dev/null @@ -1,71 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = tod - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/tod.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = $(TOD_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# generation 1 -TOD_C_PIECES_1_V = tod_g1 -# generation 2 -TOD_C_PIECES_2_V = tod -TOD_C_PIECES = $(TOD_C_PIECES_$(SCORE603E_GENERATION)_V) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.am new file mode 100644 index 0000000000..edacb0973a --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.am @@ -0,0 +1,32 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +PGM = $(ARCH)/vectors.rel + +S_FILES = vectors.S +S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o) + +OBJS = $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(PGM): $(OBJS) + $(make-rel) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile + +all-local: $(ARCH) $(OBJS) $(PGM) + +.PRECIOUS: $(PGM) + +EXTRA_DIST = vectors.S + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in deleted file mode 100644 index 3ce208fac7..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = vectors - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -PGM = ${ARCH}/vectors.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = vectors -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -all: ${ARCH} $(SRCS) $(PGM) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.am new file mode 100644 index 0000000000..c877167f3f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.am @@ -0,0 +1,33 @@ +## +## $Id$ +## + +AUTOMAKE_OPTIONS = foreign 1.4 + +BSP_PIECES = startup clock console timer tod vectors PCI_bus +# pieces to pick up out of libcpu/$(RTEMS_CPU) + +# bummer; have to use $foreach since % pattern subst rules only replace 1x +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(top_srcdir)/../../../../../../automake/lib.am + +# +# (OPTIONAL) Add local stuff here using += +# + +$(LIB): $(OBJS) + $(make-library) + +$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB) + $(INSTALL_DATA) $< $@ + +TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a + +all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES) + +.PRECIOUS: $(LIB) + +include $(top_srcdir)/../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in deleted file mode 100644 index 75ca10c81d..0000000000 --- a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = .. -subdir = wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -BSP_PIECES = startup clock console timer tod vectors PCI_bus -# pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES = -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ - piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL = @INSTALL@ -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs - $(INSTALL_DATA) $< $@ - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/shared/bootloader/Makefile.am b/c/src/lib/libbsp/powerpc/shared/bootloader/Makefile.am index dbf0286195..ad187cd187 100644 --- a/c/src/lib/libbsp/powerpc/shared/bootloader/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/bootloader/Makefile.am @@ -7,15 +7,12 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = em86.c lib.c misc.c mm.c pci.c zlib.c H_FILES = bootldr.h zlib.h pci.h -noinst_HEADERS = $(H_FILES) S_FILES = em86real.S exception.S head.S noinst_DATA = ppcboot.lds -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(top_srcdir)/../../../../../automake/lib.am - -EXTRA_DIST = README $(C_FILES) $(S_FILES) $(noinst_DATA) +EXTRA_DIST = README bootldr.h em86.c em86real.S exception.S head.S lib.c \ + misc.c mm.c pci.c pci.h ppcboot.lds zlib.c zlib.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/clock/Makefile.am b/c/src/lib/libbsp/powerpc/shared/clock/Makefile.am index 34c37f20b3..3f2e00568f 100644 --- a/c/src/lib/libbsp/powerpc/shared/clock/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/clock/Makefile.am @@ -6,6 +6,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = p_clock.c -EXTRA_DIST = $(C_FILES) +EXTRA_DIST = p_clock.c include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/console/Makefile.am b/c/src/lib/libbsp/powerpc/shared/console/Makefile.am index 63d1da3e03..004de3a27a 100644 --- a/c/src/lib/libbsp/powerpc/shared/console/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/console/Makefile.am @@ -4,11 +4,9 @@ AUTOMAKE_OPTIONS = foreign 1.4 -## C source names C_FILES = console.c inch.c polled_io.c uart.c H_FILES = consoleIo.h keyboard.h uart.h -noinst_HEADERS = $(H_FILES) $(PROJECT_INCLUDE)/bsp: $(mkinstalldirs) $@ @@ -16,9 +14,12 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = console.c consoleIo.h inch.c keyboard.h polled_io.c uart.c \ + uart.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/include/Makefile.am b/c/src/lib/libbsp/powerpc/shared/include/Makefile.am index e7386a0fb4..b1c33532a1 100644 --- a/c/src/lib/libbsp/powerpc/shared/include/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/include/Makefile.am @@ -5,6 +5,7 @@ AUTOMAKE_OPTIONS = foreign 1.4 H_FILES = nvram.h bsp.h -noinst_HEADERS = $(H_FILES) + +EXTRA_DIST = bsp.h nvram.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/irq/Makefile.am b/c/src/lib/libbsp/powerpc/shared/irq/Makefile.am index 9e83f5f07f..1348121c90 100644 --- a/c/src/lib/libbsp/powerpc/shared/irq/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/irq/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = i8259.c irq.c irq_init.c H_FILES = irq.h -noinst_HEADERS = $(H_FILES) S_FILES = irq_asm.S @@ -17,9 +16,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) $(S_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = i8259.c irq.c irq.h irq_asm.S irq_init.c include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/motorola/Makefile.am b/c/src/lib/libbsp/powerpc/shared/motorola/Makefile.am index 4aa17eeb6b..9869a42fc1 100644 --- a/c/src/lib/libbsp/powerpc/shared/motorola/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/motorola/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = motorola.c H_FILES = motorola.h -noinst_HEADERS = $(H_FILES) $(PROJECT_INCLUDE)/bsp: $(mkinstalldirs) $@ @@ -15,9 +14,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = motorola.c motorola.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/openpic/Makefile.am b/c/src/lib/libbsp/powerpc/shared/openpic/Makefile.am index ff667a1282..030c358214 100644 --- a/c/src/lib/libbsp/powerpc/shared/openpic/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/openpic/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = openpic.c H_FILES = openpic.h -noinst_HEADERS = $(H_FILES) $(PROJECT_INCLUDE)/bsp: $(mkinstalldirs) $@ @@ -15,9 +14,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = openpic.c openpic.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/pci/Makefile.am b/c/src/lib/libbsp/powerpc/shared/pci/Makefile.am index eca5f197f5..45520cb61b 100644 --- a/c/src/lib/libbsp/powerpc/shared/pci/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/pci/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = pci.c H_FILES = pci.h -noinst_HEADERS = $(H_FILES) $(PROJECT_INCLUDE)/bsp: $(mkinstalldirs) $@ @@ -15,9 +14,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = pci.c pci.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/residual/Makefile.am b/c/src/lib/libbsp/powerpc/shared/residual/Makefile.am index b5b376fa4a..43890c7b67 100644 --- a/c/src/lib/libbsp/powerpc/shared/residual/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/residual/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = residual.c H_FILES = pnp.h residual.h -noinst_HEADERS = $(H_FILES) $(PROJECT_INCLUDE)/bsp: $(mkinstalldirs) $@ @@ -15,9 +14,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = pnp.h residual.c residual.h include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/start/Makefile.am b/c/src/lib/libbsp/powerpc/shared/start/Makefile.am index 40d49d6d3a..13330128b0 100644 --- a/c/src/lib/libbsp/powerpc/shared/start/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/start/Makefile.am @@ -6,6 +6,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 S_FILES = start.S -EXTRA_DIST = $(S_FILES) +EXTRA_DIST = start.S include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/startup/Makefile.am b/c/src/lib/libbsp/powerpc/shared/startup/Makefile.am index 07702da121..cc1ab757c2 100644 --- a/c/src/lib/libbsp/powerpc/shared/startup/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/startup/Makefile.am @@ -8,6 +8,6 @@ C_FILES = bspstart.c noinst_DATA = linkcmds -EXTRA_DIST = $(C_FILES) $(noinst_DATA) +EXTRA_DIST = bspstart.c linkcmds include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/shared/vectors/Makefile.am b/c/src/lib/libbsp/powerpc/shared/vectors/Makefile.am index b547001bd1..dc97722ce4 100644 --- a/c/src/lib/libbsp/powerpc/shared/vectors/Makefile.am +++ b/c/src/lib/libbsp/powerpc/shared/vectors/Makefile.am @@ -7,7 +7,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 C_FILES = vectors_init.c H_FILES = vectors.h -noinst_HEADERS = $(H_FILES) S_FILES = vectors.S @@ -17,9 +16,11 @@ $(PROJECT_INCLUDE)/bsp: $(PROJECT_INCLUDE)/bsp/%.h: %.h $(INSTALL_DATA) $< $@ -PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp \ +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp \ $(H_FILES:%.h=$(PROJECT_INCLUDE)/bsp/%.h) -EXTRA_DIST = $(C_FILES) $(S_FILES) +all-local: $(PREINSTALL_FILES) + +EXTRA_DIST = vectors.S vectors.h vectors_init.c include $(top_srcdir)/../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/support/new_exception_processing/Makefile.am b/c/src/lib/libbsp/powerpc/support/new_exception_processing/Makefile.am index f7299a4103..c3195b159d 100644 --- a/c/src/lib/libbsp/powerpc/support/new_exception_processing/Makefile.am +++ b/c/src/lib/libbsp/powerpc/support/new_exception_processing/Makefile.am @@ -4,7 +4,6 @@ AUTOMAKE_OPTIONS = foreign 1.4 -# C source names, if any, go here -- minus the .c C_FILES = cpu.c C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o) @@ -12,7 +11,6 @@ ROOT_H_FILES = RTEMS_SCORE_H_FILES = cpu.h c_isr.inl noinst_HEADERS = $(ROOT_H_FILES) $(RTEMS_SCORE_H_FILES) -# Assembly source names, if any, go here -- minus the .S S_FILES = cpu_asm.S S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) |